IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Regression introduced in commit d6623003 (v0.8.8) - using the
wrong sizeof operand meant that security manager private data
was overlaying the allowDiskFormatProbing member of struct
_virSecurityManager. This reopens disk probing, which was
supposed to be prevented by the solution to CVE-2010-2238.
* src/security/security_manager.c
(virSecurityManagerGetPrivateData): Use correct offset.
Alas, /usr/bin/kvm is also not directly supported by testutilsqemu.c.
In fact, _any_ test that uses <cpu match=...> has to use our faked
qemu.sh in order to properly answer the 'qemu -cpu ?' probe done
during qemu command line building.
* tests/qemuxml2argvdata/*graphics-spice-timeout*: Switch emulator, again.
I noticed this while building from libvirt.git on RHEL 5.6:
Generating internals/command.html.tmp
mkdir: cannot create directory `/internals': Permission denied
If I had been building as root instead, this pollutes /.
Older autoconf lacks $(builddir), but it is rigorously equal to '.'
in newer autoconf, so we could use '$(MKDIR_P) internals' instead.
However, since internals/command.html is part of the tarball, we
_already_ build it in $(srcdir), not $(builddir) during VPATH
builds, so the mkdir is wasted effort!
* docs/Makefile.am (internals/%.html.tmp): Drop unused mkdir.
Commit 2d6adabd53 replaced qsorting disk
and controller devices with inserting them at the right position. That
was to fix unnecessary reordering of devices. However, when parsing
domain XML devices are just taken in the order in which they appear in
the XML since. Use the correct insertion algorithm to honor device
target.
Remove some special case code that took care of mapping hyper to the
correct C types.
As the list of procedures that is allowed to map hyper to long is fixed
put it in the generator instead annotations in the .x files. This
results in simpler .x file parsing code.
Use macros for hyper to long assignments that perform overflow checks
when long is smaller than hyper. Map hyper to long long by default.
Suggested by Eric Blake.
The gnutls_certificate_type_set_priority method is deprecated.
Since we already set the default gnutls priority, and do not
support OpenGPG credentials in any case, it was not serving
any useful purpose and can be removed
* src/remote/remote_driver.c: Remove src/remote/remote_driver.c
call
Convert openvzLocateConfFile to a replaceable function pointer to
allow testing the config file parsing without rewriting the whole
OpenVZ config parsing to a more testable structure.
Substitute VIR_ERR_NO_SUPPORT with VIR_ERR_INTERNAL_ERROR. Error
like following is not what user want to see.
error : pciDeviceIsAssignable:1487 : this function is not supported
by the connection driver: Device 0000:07:10.0 is behind a switch
lacking ACS and cannot be assigned
This function is also affected by getline conversion. But this
didn't result in a regression in general, because the difference
would only affect the behavior of the function when the line in
/proc/vz/vestat for the given vpsid wasn't found. Under normal
conditions this should not happen.
The regression fix in 3aab7f2d6b altered the error handling.
getline returns -1 on failure to read a line (including EOF). The
original openvzReadConfigParam function using openvz_readline only
treated EOF as not-found. The current getline version treats all
getline failures as not-found.
This patch fixes this and distinguishes EOF from other getline
failures.
Since directories can be used for <filesystem> passthrough, they are
basically storage volumes.
v2:
Skip ., .., lost+found dirs
v3:
Use gnulib last_component
v4:
Use gnulib "dirname.h", not system <dirname.h>
Don't skip lost+found
This fixes this three warnings from the parser by allowing the parser
to ignore some macros in the same way as it can ignore functions.
Parsing ./../include/libvirt/libvirt.h
Misformatted macro comment for _virSchedParameter
Expecting '* _virSchedParameter:' got '* virSchedParameter:'
Misformatted macro comment for _virBlkioParameter
Expecting '* _virBlkioParameter:' got '* virBlkioParameter:'
Misformatted macro comment for _virMemoryParameter
Expecting '* _virMemoryParameter:' got '* virMemoryParameter:'
If spice graphics has no <channel> elements, the output graphics XML
is messed up. To prevent this, we need to end the <graphics> element
just before adding any compression selecting elements.
The virSysinfoIsEqual method was mistakenly inside a #ifndef WIN32
conditional.
The existing virSysinfoFormat is also stubbed out on Win32, even
though the code works without any trouble. This breaks XML output
on Win32, so the stub is removed.
virsh migrate mistakenly had some variables inside the conditional
* src/util/sysinfo.c: Build virSysinfoIsEqual on Win32 and remove
Win32 stub for virSysinfoFormat
* tools/virsh.c: Fix variable declaration on Win32
Update the qemuDomainMigrateBegin method so that it accepts
an optional incoming XML document. This will be validated
for ABI compatibility against the current domain config,
and if this check passes, will be passed back out for use
by the qemuDomainMigratePrepare method on the target
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h,
src/qemu/qemu_migration.c: Allow custom XML to be passed
Switch virsh migrate over to use virDomainMigrate2 and
virDomainMigrateToURI2. This is still compatible with
older libvirts, because these methods dynamically choose
whether to perform v1, v2 or v3 migration based on declared
RPC support from the libvirtd instances
Add a --xml arg which allows the user to pass in a custom
XML document. This XML document must be ABI compatible
with the current *live* XML document for the running guest
on the source host. ABI compatibility will be enforced by
any driver supporting this function
* tools/virsh.c: Add '--xml' arg to migrate command
To allow a client app to pass in custom XML during migration
of a guest it is neccessary to ensure the guest ABI remains
unchanged. The virDomainDefCheckABIStablity method accepts
two virDomainDefPtr structs and compares everything in them
that could impact the guest machine ABI
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/libvirt_private.syms: Add virDomainDefCheckABIStablity
* src/conf/cpu_conf.c, src/conf/cpu_conf.h: Add virCPUDefIsEqual
* src/util/sysinfo.c, src/util/sysinfo.h: Add virSysinfoIsEqual
The virDomainHostdevDef struct contains a 'char *target'
field. This is set to 'NULL' when parsing XML and never
used / set anywhere else. Clearly it is bogus & unused
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove
target from virDomainHostdevDef
This patch seperate the domain config loading just as qemu driver
does, first loading config of running or trasient domains, then
of persistent inactive domains. And only try to reconnect the
monitor of running domains, so that it won't always throws errors
saying can't connect to domain monitor.
And as "virDomainLoadConfig->virDomainAssignDef->virDomainObjAssignDef",
already do things like "vm->newDef = def", removed the codes
in "lxcReconnectVM" that does the same work.
Add support to set the maximum memory of the domain.
Also add support to change the memory of the current
state of the domain, which translates to a running
domain or the config of the domain.
Based on the code from the qemu driver.
v3:
* initialize xml pointer to avoid segfault
* throw error message if domain is paused as
libxenlight itself will pause it
v2:
* header is now padded and has a version field
* the correct restore function from libxl is used
* only create the restore event once in libxlVmStart
This patch fixes the population of the
libxenlight data structures. Now the devices
should be removed correctly from the xenstore
if they are detached.
Currently the QEMU monitor I/O handler code uses errno values
to report errors. This results in a sub-optimal error messages
on certain conditions, in particular when parsing JSON strings
malformed data simply results in 'EINVAL'.
This changes the code to use the standard libvirt error reporting
APIs. The virError is stored against the qemuMonitorPtr struct,
and when a monitor API is run, any existing stored error is copied
into that thread's error local
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Use
virError APIs for all monitor I/O handling code
Currently whenever there is any failure with parsing the monitor,
this is treated in the same was as end-of-file (ie QEMU quit).
The domain is terminated, if not already dead.
With this change, failures in parsing the monitor stream do not
result in the death of QEMU. The guest continues running unchanged,
but all further use of the monitor will be disabled.
The VMM_FAILURE event will be emitted, and the mgmt application
can decide when to kill/restart the guest to re-gain control
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Run a
different callback for monitor EOF vs error conditions.
* src/qemu/qemu_process.c: Emit VMM_FAILURE event when monitor
fails
This introduces a new domain
VIR_DOMAIN_EVENT_ID_CONTROL_ERROR
Which uses the existing generic callback
typedef void (*virConnectDomainEventGenericCallback)(virConnectPtr conn,
virDomainPtr dom,
void *opaque);
This event is intended to be emitted when there is a failure in
some part of the domain virtualization system. Whether the domain
continues to run/exist after the failure is an implementation
detail specific to the hypervisor.
The idea is that with some types of failure, hypervisors may
prefer to leave the domain running in a "degraded" mode of
operation. For example, if something goes wrong with the QEMU
monitor, it is possible to leave the guest OS running quite
happily. The mgmt app will simply loose the ability todo various
tasks. The mgmt app can then choose how/when to deal with the
failure that occured.
* daemon/remote.c: Dispatch of new event
* examples/domain-events/events-c/event-test.c: Demo catch
of event
* include/libvirt/libvirt.h.in: Define event ID and callback
* src/conf/domain_event.c, src/conf/domain_event.h: Internal
event handling
* src/remote/remote_driver.c: Receipt of new event from daemon
* src/remote/remote_protocol.x: Wire protocol for new event
* src/remote_protocol-structs: add new event for checks
Well, the remaining drivers that already had the get/set
scheduler parameter functionality to begin with.
For now, this blindly treats VIR_DOMAIN_SCHEDINFO_CURRENT as
the only supported operation for these 5 domains; it will
take domain-specific patches if more specific behavior is
preferred.
* src/esx/esx_driver.c (esxDomainGetSchedulerParameters)
(esxDomainSetSchedulerParameters): Move guts...
(esxDomainGetSchedulerParametersFlags)
(esxDomainSetSchedulerParametersFlags): ...to new functions.
* src/libxl/libxl_driver.c (libxlDomainGetSchedulerParameters)
(libxlDomainSetSchedulerParameters)
(libxlDomainGetSchedulerParametersFlags)
(libxlDomainSetSchedulerParametersFlags): Likewise.
* src/lxc/lxc_driver.c (lxcGetSchedulerParameters)
(lxcSetSchedulerParameters, lxcGetSchedulerParametersFlags)
(lxcSetSchedulerParametersFlags): Likewise.
* src/test/test_driver.c (testDomainGetSchedulerParams)
(testDomainSetSchedulerParams, testDomainGetSchedulerParamsFlags)
(testDomainSetSchedulerParamsFlags): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetSchedulerParameters)
(xenUnifiedDomainSetSchedulerParameters)
(xenUnifiedDomainGetSchedulerParametersFlags)
(xenUnifiedDomainSetSchedulerParametersFlags): Likewise.
Since we can now set just --live or --config, we also need to be
able to query that back.
In the case of setting both --live and --config, it shouldn't matter
which value we read back; otherwise, since querying treats the two
flags as mutually exclusive, so does this patch.
* tools/virsh.c (cmdSchedinfo): Use new API where appropriate.
* src/qemu/qemu_driver.c (qemuGetSchedulerParameters): Move
guts...
(qemuGetSchedulerParametersFlags): ...to new callback, and honor
flags more accurately.
If we can choose live or config when setting, then we need to
be able to choose which one we are querying.
Also, make the documentation clear that set must use a non-empty
subset (some of the hypervisors fail if params is NULL).
* include/libvirt/libvirt.h.in
(virDomainGetSchedulerParametersFlags): New prototype.
* src/libvirt.c (virDomainGetSchedulerParametersFlags): Implement
it.
* src/libvirt_public.syms: Export it.
* python/generator.py (skip_impl): Don't auto-generate.
* src/driver.h (virDrvDomainGetSchedulerParametersFlags): New
callback.
Commit 824dcaff was a regression (thankfully unreleased) for any
client code that used 'struct _virSchedParameter' directly rather
than the preferred virSchedParameter typedef. Adding a #define
avoids even that API change, while rearranging the file makes it
clear what the old vs. new API is.
* include/libvirt/libvirt.h.in: Rearrange older names to the
bottom and improve documentation on preferred names.
(virDomainGetSchedulerParameters, virDomainSetSchedulerParameters)
(virDomainSetSchedulerParametersFlags)
(virDomainSetBlkioParameters, virDomainGetBlkioParameters)
(virDomainSetMemoryParameters, virDomainGetMemoryParameters):
Use newer type names.
* python/libvirt-override.c: Adjust code generation to cope.
Suggested by Daniel P. Berrange.
Apparently introdunced in commit 376e1d9420
the generator produces u_int flags not unsigned int flags.
* src/remote_protocol-structs: fix to the actual expected type and
alignment
This patch reorders the locks for the nwfilter updates and the access
the nwfilter objects. In the case that the IP address learning thread
was instantiating filters while an update happened, the previous order
lead to a deadlock.
It was suggested during review of a different patch that the libvirt
interface driver API's should have "netcf:" in their log
messages. This patch eliminates that from all interface driver API
functions, and also eliminates the extra " - " in the case that netcf
returns no details in its error info (which *never* happens at
present, but could happen sometime in the future.
This is the API agreed on in:
https://www.redhat.com/archives/libvir-list/2011-May/msg00026.html
(with a slight name change to use "...begin" rather than
"...start"). This implements transactional changes to the host network
config. When a transaction is begun with ncf_change_begin(), all other
netcf APIs will continue to work as they always have, but a snapshot
of the existing config will be taken, allowing reversion (rollback,
using ncf_change_rollback()) to the exact state of config at the time
ncf_change_begin() was called. Alternately, if it's determined that
the new changes are acceptable, ncf_change_commit() can be called,
which will eliminate the snapshot and make the changes permanent.
As a failsafe measure, if neither ncf_change_commit() or
ncf_change_rollback() is called by the next time the system reboots,
the netcf-transaction initscript will be automatically called to
rollback the changes.
Commit f044376530 replaced openvz_readline with getline and
changed EOF-handling in the openvzGetVPSUUID.
This patch restores original EOF-handling.
Reported by Jean-Baptiste Rouault.
The new flags allow to pick current state, config or the live
parameter, with current being the existing API default (0).
This also hooks this to --config, --live, --current parameters for
the memtune virsh command
* include/libvirt/libvirt.h.in: defines the new flags
* tools/virsh.c: adds support at virsh level
* tools/virsh.pod: updates virsh documentation
This patch allows to modify interfaces of domain(qemu)
* src/conf/domain_conf.c src/conf/domain_conf.h src/libvirt_private.syms:
(virDomainNetInsert) : Insert a network device to domain definition.
(virDomainNetIndexByMac) : Returns an index of net device in array.
(virDomainNetRemoveByMac): Remove a NIC of passed MAC address.
* src/qemu/qemu_driver.c
(qemuDomainAttachDeviceConfig): add codes for NIC.
(qemuDomainDetachDeviceConfig): add codes for NIC.
Before commit 145d6cb05c (in August 2010) absolute file names
in VMX and domain XML configs were handled correctly. But this got
lost during the refactoring. The test cases didn't highlight this
problem because they have their own set of file name handling
functions. The actual ones require a real connection to an ESX
server. Also the test case functions always worked correctly.
Fix the regression and add a new in-the-wild VMX file that contains
such a problematic absolute path. Even though this test case won't
protect against new regressions.
Reported by lofic (IRC nick)
As reported by Diego Blanco in
https://bugzilla.redhat.com/show_bug.cgi?id=702602
commit f0443765 which replaced openvz_readline to getline(3)
broke OpenVZ driver as it changed semantics of EOF-handling
when parsing OpenVZ configuration.
There're several other issues reported with current OpenVZ driver:
#1: unclear error message when parsing "CPUS=" line
#2: openvz driver goes into crashing loop
#3: "NETIF=" line in configuration is not parsed correctly
#4: aborts even when optional parameter is missing
#5: there's a potential memory leak
This updated patch to fix #[145]. This patch does not fix #[23]
as I haven't verified these yet, but this at least got me to run
OpenVZ on libvirt once again.
Coverity spotted this off-by-one. Thankfully, no one in libvirt
was ever calling virAuditSend with an argument of 3.
* src/util/virtaudit.c (virAuditSend): Use correct comparison.
Originally most of libvirt domain-specific calls were blocking
during a migration.
A new mechanism to allow specific calls (blkstat/blkinfo) to be
executed in such condition has been implemented.
In the long term it'd be desirable to get a more general
solution to mark further APIs as migration safe, without needing
special case code.
* src/qemu/qemu_migration.c: add some additional job signal
flags for doing blkstat/blkinfo during a migration
* src/qemu/qemu_domain.c: add a condition variable that can be
used to efficiently wait for the migration code to clear the
signal flag
* src/qemu/qemu_driver.c: execute blkstat/blkinfo using the
job signal flags during migration
Based on the device attach/detach code from the QEMU driver,
but using the new functions to create the structures associated.
* src/libxl/libxl_driver.c: implements domainAttachDevice,
domainAttachDeviceFlags, domainDetachDevice, domainDetachDeviceFlags
and domainUpdateDeviceFlags
Create 3 new function refactored from previous list ones and
exports them internally to the driver
* src/libxl/libxl_conf.c src/libxl/libxl_conf.h: create libxlMakeDisk,
libxlMakeNic libxlMakeVfb out of the exsting static List functions
and exports them
When modifying the disk devices of a live domain and the domain
configuration, the function qemuDomainAttachDeviceConfig
first sets dev->data->disk to NULL. Later qemuDomainAttachDeviceLive
accesses dev->data.disk and causes a segfault.
* src/qemu/qemu_driver.c: fix qemuDomainModifyDeviceFlags() accordingly
Anything generated that must end up in the tarball must either
have unconditional rules for generation (remote_protocol.c) or
must live in libvirt.git for the case where the person running
'make dist' has disabled the configure options that control the
rebuild of the generated file (remote_protocol-structs).
* src/Makefile.am (remote_protocol-structs): Add a dependency and
document why it must live in git.
($(srcdir)/remote/%_protocol.c, $(srcdir)/remote/%_protocol.c):
Unconditionally generate.
http://lists.gnu.org/archive/html/qemu-devel/2011-05/threads.html#02162
Currently, qemu silently clips any JSON integer in the range
0x8000000000000000 - 0xffffffffffffffff (all numbers in this range
will be clipped to 0x7fffffffffffffff == LLONG_MAX).
To avoid this, pass these as signed 64 bit integers in the QMP
request.
In most cases this affects flags parameters that are unsigned in the
public and driver API but signed in the XDR protocol. Switch the
XDR protocol to unsigned for those.
A counterexample is virNWFilterGetXMLDesc. Its flags parameter is signed
in the public API and XDR protocol, but unsigned in the driver API.
virNodeGetFreeMemory used unsigned long long in the public API but
signed hyper in the XDR protocol. Convert the XDR protocol to use
unsigned hyper.
As explained by Eric before, this doesn't affect the on-the-wire protocol.
Several functions return values by reference parameters. This is realized
by passing the members of remote_CALL_ret by reference to the called
function.
The position of this parameters in the function signature follows some
patterns with some exceptions. This patterns and exceptions are hardcoded
in the generator.
Add an insert@<offset> annotation to the remote_CALL_ret struct members
for functions that return lists to remove some of the hardcoded patterns
and exceptions.
The current virDomainMigrateFinish3 method signature attempts to
distinguish two types of errors, by allowing return with ret== 0,
but ddomain == NULL, to indicate a failure to start the guest.
This is flawed, because when ret == 0, there is no way for the
virErrorPtr details to be sent back to the client.
Change the signature of virDomainMigrateFinish3 so it simply
returns a virDomainPtr, in the same way as virDomainMigrateFinish2
The disk locking code will protect against the only possible
failure mode this doesn't account for (loosing conenctivity to
libvirtd after Finish3 starts the CPUs, but before the client
sees the reply for Finish3).
* src/driver.h, src/libvirt.c, src/libvirt_internal.h: Change
virDomainMigrateFinish3 to return a virDomainPtr instead of int
* src/remote/remote_driver.c, src/remote/remote_protocol.x,
daemon/remote.c, src/qemu/qemu_driver.c, src/qemu/qemu_migration.c:
Update for API change
When doing migration, if an error occurs in Perform, it must not
be overwritten during Finish/Confirm steps. If an error occurs
in Finish, it must not be overwritten in Confirm.
Previous commit a9d12c2444 added
code to qemudDomainMigrateFinish2 to preserve the error. This
is not the right place, because it is not applicable in non-p2p
migration. The src/libvirt.c virDomainMigrateV2/3 methods need
code to preserve errors for non-p2p migration, while the
doPeer2PeerMigrate2 and doPeer2PeerMigrate3 methods contain
code to preverse errors for p2p migration.
Remove the bogus error preservation from qemudDomainMigrateFinish2
and qemudDomainMigrateFinish3.
Fix virDomainMigrateV3 and doPeer2PeerMigrate3 so that they
preserve any error hit during the Finish3 step, before invoking
Confirm3.
Finally if qemuMigrationFinish fails to resume the CPUs, it must
preserve the error before tearing down the VM, so that VM cleanup
doesn't overwrite it.
* src/libvirt.c: Preserve error before invoking Confirm3
* src/qemu/qemu_driver.c: Remove bogus error preservation
code in qemudDomainMigrateFinish2/qemudDomainMigrateFinish3
* src/qemu/qemu_migration.c: Preserve error before invoking Confirm3
and after resume fails in qemuMigrationFinish.
* src/libvirt.c: Add further debug lines in helper APIs for
migration
* src/qemu/qemu_migration.c: Add debug lines for all internal
migration API parameters
Even when failing to start CPUs, the finish method was returning
a success result. Fix this so that the QEMU process is killed
off when finish fails under v3 protocol. Also rename the
killOnFinish boolean to 'v3proto' to make it clearer that this
is a tunable based on the migration protocol version
* src/qemu/qemu_driver.c: Update for API change
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Kill
VM in qemuMigrationFinish if failing to start CPUs
The SPICE seamless migration process requires data to be passed
back from the target host, to the source host via a cookie.
The cookie includes the target host's hostname, but this was not
stored, merely validated. This patch explicitly records the
remote hostname after parsing the cookie, and uses it when
initiating the SPICE migration
* qemu/qemu_migration.c: Fix SPICE seamless migration hostname
Before running perform in peer-2-peer migration, the current
guest state must be recorded, so that non-live migration can
currently unpause a running guest on completion.
* src/qemu/qemu_migration.c: Move check for offline guest
to fix non-live migration
There are two pieces of information which are desirable for
migration, which cannot be supplied by applications
- The explicit QEMU migration URI, while using Peer2Peer
migration
- An override for the target VM XML
This introduces two new public APIs to support these extra
parameters. There is no need for extra wire protocool changes,
since this is supported by the v3 migration enhancements
* include/libvirt/libvirt.h.in,
src/libvirt.c, src/libvirt_public.syms: Add virDomainMigrate2
and virDomainMigrateToURI2
The virDomainMigratePerform3 currently has a single URI parameter
whose meaning varies. It is either
- A QEMU migration URI (normal migration)
- A libvirtd connection URI (peer2peer migration)
Unfortunately when using peer2peer migration, without also
using tunnelled migration, it is possible that both URIs are
required.
This adds a second URI parameter to the virDomainMigratePerform3
method, to cope with this scenario. Each parameter how has a fixed
meaning.
NB, there is no way to actually take advantage of this yet,
since virDomainMigrate/virDomainMigrateToURI do not have any
way to provide the 2 separate URIs
* daemon/remote.c, src/remote/remote_driver.c,
src/remote/remote_protocol.x, src/remote_protocol-structs: Add
the second URI parameter to perform3 message
* src/driver.h, src/libvirt.c, src/libvirt_internal.h: Add
the second URI parameter to Perform3 method
* src/libvirt_internal.h, src/qemu/qemu_migration.c,
src/qemu/qemu_migration.h: Update to handle URIs correctly
This extends the v3 migration protocol such that the
virDomainMigrateBegin3 and virDomainMigratePerform3
methods accept an application supplied XML config for
the target VM.
If the 'xmlin' parameter is NULL, then Begin3 uses the
current guest XML as normal. A driver implementing the
Begin3 method should either reject all non-NULL 'xmlin'
parameters, or strictly validate that the app supplied
XML does not change guest ABI.
The Perform3 method also needed the xmlin parameter to
cope with the Peer2Peer migration sequence.
NB it is not yet possible to use this capability since
neither of the public virDomainMigrate/virDomainMigrateToURI
methods have a way to pass in XML.
* daemon/remote.c, src/remote/remote_driver.c,
src/remote/remote_protocol.x, src/remote_protocol-structs:
Add 'remote_string xmlin' parameter to begin3/perform3
RPC messages
* src/libvirt.c, src/driver.h, src/libvirt_internal.h: Add
'const char *xmlin' parameter to Begin3/Perform3 methods
* src/qemu/qemu_driver.c, src/qemu/qemu_migration.c,
src/qemu/qemu_migration.h: Pass xmlin parameter around
migration methods
Otherwise an attempt to use virConnectOpen or virConnectOpenAuth without
auth pointer results in the driver declining the URI and libvirt falling
back to the remote driver for an esx:// URI.
The cur_vcpus member of struct libxl_domain_build_info was incorrectly
initialized to the number of vcpus, when it should have been interpreted
as a bitmap, where bit X corresponds to online/offline status of vcpuX.
To complicate matters, cur_vcpus is an int, so only 32 vcpus can be
set online. Add a check to ensure vcpus does not exceed this limit.
V2: Eric Blake noted a compilation pitfal when '1 << 32' on an int.
Account for vcpus == 32.
We don't use the gnulib vsnprintf replacement, which means that
on mingw, vsnprintf doesn't support %zn or %lln.
And as it turns out, VIR_GET_VAR_STR was a rather inefficient
reimplementation of virVasprintf logic.
* src/util/logging.c (VIR_GET_VAR_STR): Drop.
(virLogMessage): Inline a simpler version here.
* src/util/virterror.c (VIR_GET_VAR_STR, virRaiseErrorFull):
Likewise.
Reported by Matthias Bolte.
Saving domain to previously created file changes also its ownership.
This is certainly not what users want if some conditions are met:
it is a regular, local file and dynamic_ownership is off.
NB: the enum that uses the string vnet-host (now changed to vhost-net)
is used in XML, but fortunately that hasn't been in an official
release yet, so it can still be fixed.
Since -vnc uses ':' to separate the address from the port, raw
IPv6 addresses need to be escaped like [addr]:port
* src/qemu/qemu_command.c: Escape raw IPv6 addresses with []
* tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml: Tweak
to test Ipv6 escaping
* docs/schemas/domain.rng: Allow Ipv6 addresses, or hostnames
in <graphics> listen attributes
The qemuMigrationConfirm method shouldn't deal with final VM
cleanup, since it can be called from the peer2peer migration,
which expects to still use the 'vm' object afterwards.
Push the cleanup code out of qemuMigrationConfirm, into its
caller, qemuDomainMigrateConfirm3
* src/qemu/qemu_driver.c: Add VM cleanup code to
qemuDomainMigrateConfirm3
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Remove
job handling cleanup from qemuMigrationConfirm
To allow new mandatory migration cookie data to be introduced,
add support for checking supported feature flags when parsing
migration cookie.
* src/qemu/qemu_migration.c: Feature flag checking in migration
cookie parsing
Two additional places need initgroups call to properly work in an
environment where the UID is allowed to open/create stuff through its
supplementary groups.
py_str() function call PyString_AsString(). As written in documentation,
the caller must not free the returned value, because it points to some
internal structures.
This adds a streaming-video=filter|all|off attribute. It is used to change
the behavior of video stream detection in spice, the default is filter (the
default for libvirt is not to specify it - the actual default is defined in
libspice-server.so).
Usage:
<graphics type='spice' autoport='yes'>
<streaming mode='off'/>
</graphics>
Tested with the above and with tests/qemuxml2argvtest.
Signed-off-by: Alon Levy <alevy@redhat.com>
This patch enables filtering of gratuitous ARP packets using the following XML:
<rule action='accept' direction='in' priority='425'>
<arp gratuitous='true'/>
</rule>
This was discussed in:
https://www.redhat.com/archives/libvir-list/2011-May/msg01370.html
The capabilities code only sets the flag to allow use of vhost-net if
kvm is detected (set if the help string contains "(qemu-kvm-" or
"(kvm-"), but actually vhost-net is available in some qemu builds that
don't have kvm in their name, so just checking for ",vhost=" is enough.
When using TLS authentication and operating as the non-root user,
initially attempt to use that specific user's TLS certificates before
attempting to use the system wide TLS certificates.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Otherwise qemu is unable to write to it, with the error:
libvir: QEMU error : internal error unable to execute QEMU command 'memsave': Could not open '/var/cache/libvirt/qemu/qemu.mem.RRNvLv'
Now that RHEL 5.6 ships with gettext 0.17, we can get out of the
stone age and use the newer gettext capabilities and improved
macros for certain configure tests.
* configure.ac (AM_GNU_GETTEXT_VERSION): Bump to 0.17.
(MKINSTALLDIRS): Delete hack that is no longer needed.
* bootstrap.conf (buildreq): Check for minimum gettext version.
Based on a report by Wen Congyang.
The v2 migration protocol had a limit on cookie length that was
too small to be useful for QEMU. Avoid generating cookies with
v2 protocol, so that old libvirtd can still reliably migrate a
guest to new libvirtd uses v2 protocol.
* src/qemu/qemu_driver.c: Avoid migration cookies with v2
migration
When generating a cookie for a guest with no data, the
QEMU_MIGRATION_COOKIE_GRAPHICS flag was set even if no
graphics data was added. Avoid setting the flag unless
it was needed, also add a safety check for mig->graphics
being non-NULL
* src/qemu/qemu_migration.c: Avoid cookie crash for guest
with no graphics
The internal virDomainMigratePeer2Peer and virDomainMigrateDirect
helper methods were not checking whether the target supports the
v3 migration protocol.
* src/libvirt.c: Use v3 migration protocol for p2p/direct
migration if available.
Some bogus apps are generating a VNC/SPICE/RFB listen attribute
with no content. This then causes a failure with the graphics
migration cookie parsing. Blank out the 'listenAddr' parameter
after parsing domain XML if it is the empty string, so the host
default takes over
* src/qemu/qemu_migration.c: Blank out listenAddr parameter
if empty
The on-the-wire protocol is identical; XDR guarantees that
both 'hyper' and 'unsigned hyper' are transmitted as 8 bytes.
* src/remote/remote_protocol.x (remote_get_version_ret)
(remote_get_lib_version_ret): Match public API.
* daemon/remote_generator.pl: Drop special case.
* src/remote_protocol-structs: Reflect updated type.
Clang couldn't quite see that the same condition of
(flags & VIR_DOMAIN_MEM_CONFIG) is used twice, such that
the second block is guaranteed that def was assigned in
the first block.
* src/libxl/libxl_driver.c (libxlDomainSetMemoryFlags): Add a hint
for clang.
Ramon de Carvalho Valle reported a problem with:
virsh connect qemu:///system
as a non-root user. The real root problem appears to be a regression
in libvirtd being auto-started on the default qemu:///session URI;
however, the symptom points to an independent flaw in virsh - we
shouldn't be wasting efforts on making a connection if we aren't going
to be using that connection. Fixing virsh avoids Ramon's issue, while
I work in the meantime to fix the real libvirtd regression.
This patch looks big, but that's because 'gcc -Wmissing-field-initializers'
gets triggered by './autobuild.sh --enable-compile-warnings=error', so I
had to add 0 initialization to everyone (rather than my preference of
just adding the non-zero flags to virshCmds and to cmdConnect).
Meanwhile, if you use 'virsh -c URI', the connection must succeed; this
patch _only_ optimizes the default connection to be deferred to a later
point where we know if a particular command to be run needs a connection.
* tools/virsh.c (VSH_CMD_FLAG_NOCONNECT): New flag.
(vshCmdDef): Add new flags field.
(vshCommandRun): Honor new flag.
(domManagementCmds, domMonitoringCmds, storagePoolCmds)
(storageVolCmds, networkCmds, nodedevCmds, ifaceCmds)
(nwfilterCmds, secretCmds, virshCmds, snapshotCmds)
(hostAndHypervisorCmds): Populate new field.
(vshReconnect): Don't warn on initial connection.
Improve invalid argument checks in the size query case. The drivers already
relied on this unchecked behavior.
Relax the implementation of virDomainGet(Memory|Blkio)MemoryParameters
in the drivers and allow to pass more memory than necessary for all
parameters.
Add invalid argument checks for params and nparams to the public API
and remove them from the drivers (e.g. xend).
Add subset handling to libxl and test drivers.
params and nparams are essential and cannot be NULL. Check this in
libvirt.c and remove redundant checks from the drivers (e.g. xend).
Instead of enforcing that nparams must point to exact same value as
returned by virDomainGetSchedulerType relax this to a lower bound
check. This is what some drivers (e.g. xen hypervisor and esx)
already did. Other drivers (e.g. xend) didn't check nparams at all
and assumed that there is enough space in params.
Unify the behavior in all drivers to a lower bound check and update
nparams to the number of valid values in params on success.
Some drivers assumed it can be NULL (e.g. qemu and lxc) and check it
before assigning to it, other drivers assumed it must be non-NULL
(e.g. test and esx) and just assigned to it.
Unify this to nparams being optional and document it.
This error code has existed since the dawn of time, yet the messages it
generates are almost universally busted. Here's a small sampling:
src/conf/domain_conf.c:4889 : XML description for missing root element is not well formed or invalid
src/conf/domain_conf.c:4951 : XML description for unknown device type is not well formed or invalid
src/conf/domain_conf.c:5460 : XML description for maximum vcpus must be an integer is not well formed or invalid
src/conf/domain_conf.c:5468 : XML description for invalid maxvcpus %(count)lu is not well formed or invalid
Fix up the error code to instead be
XML error: <msg>
Adjust the few locations that were using the original correctly (or shouldn't
have been using the error code at all).
v2:
Fix wording of error code without a passed argument
The new type is identical to the three old types that it replaces,
and by creating a common type, this allows future patches to share
common code that manipulates typed parameters.
This change is backwards-compatible in API (recompilation works
without any edits) and ABI (an older client that has not been
recompiled uses the same layout) for code using only public
names; only code using private names (those beginning with _)
will have to adapt.
* include/libvirt/libvirt.h.in (virTypedParameterType)
(VIR_TYPED_PARAM_FIELD_LENGTH, _virTypedParameter): New enum,
macro, and type.
(virSchedParameter, virBlkioParameter, virMemoryParameter):
Rewrite in terms of a common type, while keeping all old public
names for backwards compatibility.
(struct _virSchedParameter, struct _virBlkioParameter)
(struct _virMemoryParameter): Delete - these are private names.
* python/generator.py (enum): Cope with the refactoring.
starting with kernel 2.6.38 macvtap supports a 'passthru' mode for
attaching virtual functions of a SRIOV capable network card directly to a VM.
This patch adds the capability to configure such a device.
Signed-off-by: Dirk Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
<sys/syslimits.h> is not standardized, so portable programs should
not need to rely on it. If there really is something that we need
where <sys/syslimits.h> provided the limit but <limits.h> did not,
then that would be a candidate for fixing in gnulib. But this patch
did not turn up any compilation failures on Linux.
* src/internal.h (includes): Drop unused header.
* daemon/libvirtd.h (includes): Likewise.
* configure.ac (AC_CHECK_HEADERS): Likewise.
Based on a report by Matthias Bolte.
POSIX allows sysconf(_SC_GETPW_R_SIZE_MAX) to return -1 if there
is no fixed limit, and requires ERANGE errors to track real size.
Model our behavior after the example in POSIX itself:
http://pubs.opengroup.org/onlinepubs/9699919799/functions/getpwuid_r.html
Also, on error for get*_r functions, errno is undefined, and the
real error was the return value.
* src/util/util.c (virGetUserEnt, virGetUserID, virGetGroupID)
(virSetUIDGID): Cope with sysconf failure or too small buffer.
Reported by Matthias Bolte.
virRunWithHook is now unused, so we can drop it. Tested w/ raw + qcow2
volume creation and copying.
v2:
Use opaque data to skip hook second time around
Simply command building
v3:
Drop explicit FindFileInPath
virStreamNew needs to dispatch the error that virGetStream reports
on failure.
remoteCreateClientStream can fail due to virStreamNew or due to
VIR_ALLOC. Report OOM error for VIR_ALLOC failure to report errors
in all error cases.
Remove OOM error reporting from remoteCreateClientStream callers.
When the session has expired then multiple threads can race while
reestablishing it.
This race condition is not that critical as it requires a special usage
pattern to be triggered. It can only happen when an application doesn't
do API calls for quite some time (the session expires after 30 min
inactivity) and then multiple threads doing simultaneous API calls and
end up doing simultaneous calls to esxVI_EnsureSession.
virsh didn't call virInitialize(), which (among other things)
initializes virLastErr thread local variable. As a result of that, virsh
could just segfault in virEventRegisterDefaultImpl() since that is the
first call that touches (resets) virLastErr.
I have no idea what lucky coincidence made this bug visible but I was
able to reproduce it in 100% cases but only in one specific environment
which included building in sandbox.
Mingw execve() has a broken signature. Disable this
function until gnulib fixes the signature, since we
don't really need this on Win32 anyway.
* src/util/command.c: Disable virCommandExec on Win32
When failing to marshall an XDR message, include the
full program/version/status/proc/type info, to allow
easier debugging & diagnosis of the problem.
* src/remote/remote_driver.c: Improve error when marshalling
fails
By running the doTunnelSendAll code in a separate thread, the
main thread can do qemuMigrationWaitForCompletion as with
normal migration. This in turn ensures that job signals work
correctly and that progress monitoring can be done
* src/qemu/qemu_migration.c: Run tunnelled migration in
separate thread
Cancelling the QEMU migration may cause QEMU to flush pending
data on the migration socket. This may in turn block QEMU if
nothing reads from the other end of the socket. Closing the
socket before cancelling QEMU migration avoids this possible
deadlock.
* src/qemu/qemu_migration.c: Close sockets before cancelling
migration on failure
The 'nbytes' variable was not re-initialized to the
buffer size on each iteration of the tunnelled migration
loop. While saferead() will ensure a full read, except
on EOF, it is clearer to use the real buffer size
* src/qemu/qemu_migration.c: Always read full buffer of data
The qemuMigrationWaitForCompletion method contains a loop which
repeatedly queries QEMU to check migration progress, and also
processes job signals (pause, setspeed, setbandwidth, cancel).
The tunnelled migration loop does not currently support this
functionality, but should. Refactor the code to allow it to
be used with tunnelled migration.
Implement the v3 migration protocol, which has two extra
steps, 'begin' on the source host and 'confirm' on the
source host. All other methods also gain both input and
output cookies to allow bi-directional data passing at
all stages.
The QEMU peer2peer migration method gains another impl
to provide the v3 migration. This finally allows migration
cookies to work with tunnelled migration, which is required
for Spice seamless migration & the lock manager transfer
* src/qemu/qemu_driver.c: Wire up migrate v3 APIs
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Add
begin & confirm methods, and peer2peer impl of v3
Merge the doNonTunnelMigrate2 and doTunnelMigrate2 methods
into one doPeer2PeerMigrate2 method, since they are substantially
the same. With the introduction of v3 migration, this will be
even more important, to avoid massive code duplication.
* src/qemu/qemu_migration.c: Merge tunnel & non-tunnel migration
The v2 migration protocol was accidentally missing out the
finish step, when prepare succeeded, but returned an invalid
URI
* src/libvirt.c: Teardown VM if prepare returns invalid URI
To facilitate the introduction of the v3 migration protocol,
the doTunnelMigrate method is refactored into two pieces. One
piece is intended to mirror the flow of virDomainMigrateVersion2,
while the other is the helper for setting up sockets and processing
the data.
Previously socket setup would be done before the 'prepare' step,
so errors could be dealt with immediately, avoiding need to shut
off the destination QEMU. In the new split, socket setup is done
after the 'prepare' step. This is not a serious problem, since
the control flow already requires calling 'finish' to tear down
the destination QEMU upon several errors.
* src/qemu/qemu_migration.c:
Use the graphics information from the QEMU migration cookie to
issue a 'client_migrate_info' monitor command to QEMU. This causes
the SPICE client to automatically reconnect to the target host
when migration completes
* src/qemu/qemu_migration.c: Set data for SPICE client relocation
before starting migration on src
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
new qemuMonitorGraphicsRelocate() command
Extend the QEMU migration cookie structure to allow information
about the destination host graphics setup to be passed by to
the source host. This will enable seamless migration of any
connected graphics clients
* src/qemu/qemu_migration.c: Add graphics info to migration
cookies
* daemon/libvirtd.c: Always initialize gnutls to enable
x509 cert parsing in QEMU
The migration protocol has support for a 'cookie' parameter which
is an opaque array of bytes as far as libvirt is concerned. Drivers
may use this for passing around arbitrary extra data they might
need during migration. The QEMU driver needs to do a few things:
- Pass hostname/uuid to allow strict protection against localhost
migration attempts
- Pass SPICE/VNC server port from the target back to the source to
allow seamless relocation of client sessions
- Pass lock driver state from source to destination
This patch introduces the basic glue for handling cookies
but only includes the host/guest UUID & name.
* src/libvirt_private.syms: Export virXMLParseStrHelper
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Parsing
and formatting of migration cookies
* src/qemu/qemu_driver.c: Pass in cookie parameters where possible
* src/remote/remote_protocol.h, src/remote/remote_protocol.x: Change
cookie max length to 16384 bytes
The qemuMigrationPrepareTunnel method should not unlock the
qemu driver, since that is the caller's job.
* src/qemu/qemu_migration.c: Fix qemuMigrationPrepareTunnel
unlocking of QEMU driver
Migration just seems to go from bad to worse. We already had to
introduce a second migration protocol when adding the QEMU driver,
since the one from Xen was insufficiently flexible to cope with
passing the data the QEMU driver required.
It turns out that this protocol still has some flaws that we
need to address. The current sequence is
* Src: DumpXML
- Generate XML to pass to dst
* Dst: Prepare
- Get ready to accept incoming VM
- Generate optional cookie to pass to src
* Src: Perform
- Start migration and wait for send completion
- Kill off VM if successful, resume if failed
* Dst: Finish
- Wait for recv completion and check status
- Kill off VM if unsuccessful
The problems with this are:
- Since the first step is a generic 'DumpXML' call, we can't
add in other migration specific data. eg, we can't include
any VM lease data from lock manager plugins
- Since the first step is a generic 'DumpXML' call, we can't
emit any 'migration begin' event on the source, or have
any hook that runs right at the start of the process
- Since there is no final step on the source, if the Finish
method fails to receive all migration data & has to kill
the VM, then there's no way to resume the original VM
on the source
This patch attempts to introduce a version 3 that uses the
improved 5 step sequence
* Src: Begin
- Generate XML to pass to dst
- Generate optional cookie to pass to dst
* Dst: Prepare
- Get ready to accept incoming VM
- Generate optional cookie to pass to src
* Src: Perform
- Start migration and wait for send completion
- Generate optional cookie to pass to dst
* Dst: Finish
- Wait for recv completion and check status
- Kill off VM if failed, resume if success
- Generate optional cookie to pass to src
* Src: Confirm
- Kill off VM if success, resume if failed
The API is designed to allow both input and output cookies
in all methods where applicable. This lets us pass around
arbitrary extra driver specific data between src & dst during
migration. Combined with the extra 'Begin' method this lets
us pass lease information from source to dst at the start of
migration
Moving the killing of the source VM out of Perform and
into Confirm, means we can now recover if the dst host
can't successfully Finish receiving migration data.
The hvsupport.html.in file is forever out of date. By annotating
the driver struct tables in each driver with version information,
we can auto-generate the hvsupport.html.in file. Annotating the
drivers will be mandatory for new patches, ensuring hvsupport.html.in
is never out of date again.
* docs/hvsupport.html.in: Delete
* hvsupport.pl: Script to generate hvsupport.html.in
* Makefile.am: Autogenerate hvsupport.html.in
Change all the driver struct initializers to use the
C99 style, leaving out unused fields. This will make
it possible to add new APIs without changing every
driver. eg change:
qemudDomainResume, /* domainResume */
qemudDomainShutdown, /* domainShutdown */
NULL, /* domainReboot */
qemudDomainDestroy, /* domainDestroy */
to
.domainResume = qemudDomainResume,
.domainShutdown = qemudDomainShutdown,
.domainDestroy = qemudDomainDestroy,
And get rid of any existing C99 style initializersr which
set NULL, eg change
.listPools = vboxStorageListPools,
.numOfDefinedPools = NULL,
.listDefinedPools = NULL,
.findPoolSources = NULL,
.poolLookupByName = vboxStoragePoolLookupByName,
to
.listPools = vboxStorageListPools,
.poolLookupByName = vboxStoragePoolLookupByName,
Fix some driver names:
s/virDrvCPUCompare/virDrvCompareCPU/
s/virDrvCPUBaseline/virDrvBaselineCPU/
s/virDrvQemuDomainMonitorCommand/virDrvDomainQemuMonitorCommand/
s/virDrvSecretNumOfSecrets/virDrvNumOfSecrets/
s/virDrvSecretListSecrets/virDrvListSecrets/
And some driver struct field names:
s/getFreeMemory/nodeGetFreeMemory/
Only in drivers which use virDomainObj, drivers that query hypervisor
for domain status need to be updated separately in case their hypervisor
supports this functionality.
The reason is also saved into domain state XML so if a domain is not
running (i.e., no state XML exists) the reason will be lost by libvirtd
restart. I think this is an acceptable limitation.
This has been present since the introduction of phypAttachDevice
in commit 444fd07a.
* src/phyp/phyp_driver.c (phypAttachDevice): Don't dereference
NULL.
virFDStreamClose used a mutex after it was freed, and failed
to destroy that mutex on its last use.
* src/fdstream.c (virFDStreamFree): Inline into sole caller...
(virFDStreamClose): ...to avoid use-after-free and leak.
Reported by Matthias Bolte.
Several vSphere API methods are called on global objects like the
FileManager, the PerformanceManager or the SearchIndex. The generator
input file allows to mark such methods and the generator generates
such method in a way that automatically handles marked parameter. This
is done by some special macros. Those were manually written and this
patch moves them to the generator.
One functionality change here is that we no longer force enable the event
timeout for every queued event, only enable it for the first event after
the queue has been flushed. This is how other drivers have already done it,
and I haven't encountered problems in practice.
v3:
Adjust for new virDomainEventStateNew argument
The same code for queueing, flushing, and deregistering events exists
in multiple drivers, which will soon use these common functions.
v2:
Adjust libvirt_private.syms
isDispatching bool fixes
NONNULL tagging
v3:
Add requireTimer parameter to virDomainEventStateNew
This structure will be used to unify lots of duplicated event handling code
across the state drivers.
v2:
Check for state == NULL in StateFree
Add NONNULL tagging
Use bool for isDispatching
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Use capabilities to allow a driver to register a default <init> if none
is specified in the XML. Openvz was already open-coding this to be /sbin/init
LXC currently falls over if no init is specified, so an explicit error is
an improvement IMO.
(Side note: I don't think we can set a default value for LXC. If we use
/sbin/init but the user doesn't specify a separate root FS for their guest,
the container will rerun the host's init which can be traumatic :). For
virt-install I'm thinking of defaulting to /sbin/init if a root FS has
been specified, otherwise require the user to manually specify <init>)
This is needed if we want to transfer a temporary file. If the
transfer is done with iohelper, we might run into a race condition,
where we unlink() file before iohelper is executed.
* src/fdstream.c, src/fdstream.h,
src/util/iohelper.c: Add new option
* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c,
src/storage/storage_driver.c, src/uml/uml_driver.c,
src/xen/xen_driver.c: Expand existing function calls
Add public API for taking screenshots of current domain console.
* include/libvirt/libvirt.h.in: add virDomainScreenshot
* src/libvirt_public.syms: Export new symbol
There is no need to redefine _GNU_SOURCE in tests that occur after
gl_INIT, since that macro already AC_DEFINE'd it for us.
Signed-off-by: Eric Blake <eblake@redhat.com>
This re-adds the example section originally written by Osier Yang,
and indicates the version in which the cputune parameters became
available in libvirt.
Signed-off-by: Igor Serebryany <igor47@moomers.org>
The public API and RPC over-the-wire format have no flags argument,
so neither should the internal callback API. This simplifies the
RPC generator.
* src/driver.h (virDrvNWFilterDefineXML): Drop argument that does
not match public API.
* src/nwfilter/nwfilter_driver.c (nwfilterDefine): Likewise.
* src/libvirt.c (virNWFilterDefineXML): Likewise.
* daemon/remote_generator.pl: Drop special case.
We were 31/73 on whether to translate; since less than 50% translated
and since VIR_INFO is less than VIR_WARN which also doesn't translate,
this makes sense.
* cfg.mk (sc_prohibit_gettext_markup): Add VIR_INFO, since it
falls between WARN and DEBUG.
* daemon/libvirtd.c (qemudDispatchSignalEvent, remoteCheckAccess)
(qemudDispatchServer): Adjust offenders.
* daemon/remote.c (remoteDispatchAuthPolkit): Likewise.
* src/network/bridge_driver.c (networkReloadIptablesRules)
(networkStartNetworkDaemon, networkShutdownNetworkDaemon)
(networkCreate, networkDefine, networkUndefine): Likewise.
* src/qemu/qemu_driver.c (qemudDomainDefine)
(qemudDomainUndefine): Likewise.
* src/storage/storage_driver.c (storagePoolCreate)
(storagePoolDefine, storagePoolUndefine, storagePoolStart)
(storagePoolDestroy, storagePoolDelete, storageVolumeCreateXML)
(storageVolumeCreateXMLFrom, storageVolumeDelete): Likewise.
* src/util/bridge.c (brProbeVnetHdr): Likewise.
* po/POTFILES.in: Drop src/util/bridge.c.
This one's tricker than the VIR_DEBUG0() removal, but the end
result is still C99 compliant, and reasonable with enough comments.
* src/libvirt.c (VIR_ARG10, VIR_HAS_COMMA)
(VIR_DOMAIN_DEBUG_EXPAND, VIR_DOMAIN_DEBUG_PASTE): New macros.
(VIR_DOMAIN_DEBUG): Rewrite to handle one argument, moving
multi-argument guts to...
(VIR_DOMAIN_DEBUG_1): New macro.
(VIR_DOMAIN_DEBUG0): Rename to VIR_DOMAIN_DEBUG_0.
glibc 2.13.90 has obsoleted its rpc implementation in favour of
the one provided by the TI-RPC library:
> * The RPC implementation in libc is obsoleted. Old programs keep working
> but new programs cannot be linked with the routines in libc anymore.
> Programs in need of RPC functionality must be linked against TI-RPC.
> The TI-RPC implemtation is IPv6 enabled and there are other benefits.
>
> Visible changes of this change include (obviously) the inability to
> link
> programs using RPC functions without referencing the TI-RPC library,
> the
> removal of the RPC headers from the glibc headers, and the lack of
> symbols defined in <rpc/netdb.h> when <netdb.h> is installed.
> Implemented by Ulrich Drepper.
(from glibc NEWS)
Thus with recent glibc, we need to try linking with -ltirpc when looking
for the XDR functions. The daemon also needs to use XDR_CFLAGS to be able
to find the XDR headers stored in /usr/include/tirpc.
When using TI-RPC, there are some warnings about redundant declarations, but
the fix probably belongs in other modules:
/usr/include/tirpc/rpc/rpcent.h:68:13: warning: redundant redeclaration of
'setrpcent' [-Wredundant-decls]
/usr/include/rpc/netdb.h:53:13: note: previous declaration of 'setrpcent'
was here
/usr/include/tirpc/rpc/rpcent.h:69:13: warning: redundant redeclaration of
'endrpcent' [-Wredundant-decls]
/usr/include/rpc/netdb.h:54:13: note: previous declaration of 'endrpcent'
was here
/usr/include/tirpc/rpc/rpc.h:84:12: warning: redundant redeclaration of
'bindresvport' [-Wredundant-decls]
/usr/include/netinet/in.h:440:12: note: previous declaration of
'bindresvport' was here
Use of ',##__VA_ARGS__' is a gcc extension not guaranteed by
C99; thankfully, we can avoid it by lumping the format argument
into the var-args set.
* src/util/logging.h (VIR_DEBUG_INT, VIR_INFO_INT, VIR_WARN_INT)
(VIR_ERROR_INT, VIR_DEBUG, VIR_INFO, VIR_WARN, VIR_ERROR): Stick
to C99 var-arg macro syntax.
* examples/domain-events/events-c/event-test.c (VIR_DEBUG):
Simplify.
These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead.
How do these coversions works? The magic is using the gcc extension of ##.
When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to
avoid compile error.
example: origin after CPP
high_level_api("%d", a_int) low_level_api("%d", a_int)
high_level_api("a string") low_level_api("a string")
About 400 conversions.
8 special conversions:
VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions
VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions
VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal)
(for security) 6 conversions
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Double-close regression in upstream gnulib fclose was introduced
to libvirt in commit 9d8e01a1d.
Meanwhile, adding rpcgen as a bootstrap prerequisite in commit
fb1e8d9c prevented RHEL 5 from running bootstrap.
* .gnulib: Update to latest, for fclose and bootstrap fixes.
* bootstrap: Synchronize from upstream.
If we plow on after udev_device_get_syspath fails, we will hit a NULL
dereference. Clang found one due to strdup later in udevSetParent,
but in fact we hit a NULL dereference sooner because of the use of
STREQ within virNodeDeviceFindBySysfsPath.
* src/conf/node_device_conf.h (virNodeDeviceFindBySysfsPath): Mark
path argument non-null.
* src/node_device/node_device_udev.c (udevSetParent): Avoid null
dereference.
No syntactic effect; this merely silences some clang warnings.
* src/libxl/libxl_driver.c (libxlDomainSetVcpusFlags): Drop
redundant ret=0 statement.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextDriveDel):
Likewise.
Running ./autobuild.sh failed when gcov is installed, because
commandtest ended up crashing during gcov's getenv() call after
exit() had already started. I traced this nasty bug back to
a scoping issue present since the test introduction.
* tests/commandtest.c (mymain): Move newenv...
(newenv): ...to a scope that is still useful during exit().
* daemon/Makefile.am (DAEMON_GENERATED, remote_dispatch_*.h)
(qemu_dispatch_*.h): Update to live in srcdir, since they are
distributed.
Detected by Daniel P. Berrange's autobuilder.
Introduce a virProcessKill function that can be safely called
even when the job mutex is held. This allows virDomainDestroy
to kill any VM even if it is asleep in a monitor job. The PID
will die and the thread asleep on the monitor will then wake
up releasing the job mutex.
* src/qemu/qemu_driver.c: Kill process before using qemuProcessStop
to ensure job is released
* src/qemu/qemu_process.c: Add virProcessKill for killing off
QEMU processes
Version 2.0.0 or yajl changed API. It is fairly trivial for us to
cope with both APIs in libvirt, so adapt.
* configure.ac: Probe for yajl2 API
* src/util/json.c: Conditional support for yajl2 API
libxl accepts hpet configuration in its domain info struct. Parse the
domain definition's <clock> element in order to set the value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apologies from Eric Blake, for mistakenly committing the broken
intermediate version.
libxl accepts hpet configuration in its domain info struct. Parse the
domain definition's <clock> element in order to set the value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent versions of Xen disable the virtual HPET by default. This is
usually more precise because tick policies are not implemented for
the HPET in Xen. However, there may be several reasons to control
the HPET manually: 1) to test the emulation; 2) because distros may
provide the knob while leaving the default to "enabled" for compatibility
reasons.
This patch provides support for the hpet item in both sexpr and xm
formats, and translates it to a <timer> element.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update the documentation to mention that the CA certificate and the
client cert/key pair can come from the user's location or the global
location independent of each other.
Signed-off-by: Doug Goldstein <cardoe@gentoo.org>
Allow the CA certificate to come from the user's home directory or from
the global location independently of the client certificate/key pair.
Mostly for the case when each user on a system has their own cert/key
pair but the system as a whole shares the same CA.
Signed-off-by: Doug Goldstein <cardoe@gentoo.org>
This matches the public API and helps to get rid of some special
case code in the remote generator.
Rename driver API functions and XDR protocol structs.
No functional change included outside of the remote generator.
Actually execs the argv/env we've generated, replacing the current process.
Kind of has a limited usage, but allows us to use virCommand in LXC
driver to launch the 'init' process
Make sure that xgettext scans generated files for translatable
strings, rather than just files stored in libvirt.git.
* .gnulib: Update, for bootstrap and syntax-check fixes.
* bootstrap: Resynchronize with gnulib.
* cfg.mk (generated_files): Define.
* po/POTFILES.in: Add more files with _().
assert() is forbidden in libvirt code, and these two cases would
in fact never execute due to earlier error checks.
* src/libvirt.c: Remove assert() usage
The libvirtd daemon uses fnmatch. Although we don't yet build
it on Win32, we should use gnulib's fnmatch module to ensure
portability to all platforms.
* bootstrap.conf: Add fnmatch
Noticed this while trying to run rpcgen on cygwin.
* src/Makefile.am ($(srcdir)/remote/%_protocol.h)
($(srcdir)/remote/%_protocol.c): Add a dependency.
Stop storing the generated files for the remote protocol client
and server in source control. The generated files will still be
included in the result of 'make dist' to avoid end-users needing
to generate the files
Signed-off-by: Eric Blake <eblake@redhat.com>
Unfortunately, this means that the strings marked for translation
in generated files are not picked up by gnulib's syntax-check,
I'm working on fixing that in gnulib.
* .gitignore, cfg.mk, po/POTFILES.in: Reflect deletion.
Always generate the rpc files, and require rpcgen during bootstrap.
* daemon/Makefile.am: Removed generated files with
maintainer-clean target
* src/Makefile.am: Removed generated files with
maintainer-clean target. Always run 'rpcgen' if
generated files are missing
In preparation for removing generated files, it is necessary
to tell automake that the generated files must be distributed
but not directly compiled (since they are included into the
body of a larger .c file that is compiled). Hence, even though
these files are code and not headers in the strict sense of
the word, it is easier to rename them to .h for automake's sake.
* daemon/remote_client_bodies.c: Rename to .h.
* daemon/qemu_client_bodies.c: Likewise.
* src/remote/remote_client_bodies.c: Likewise.
* src/remote/qemu_client_bodies.c: Likewise.
* daemon/Makefile.am (remote_dispatch_bodies.c)
(qemu_dispatch_bodies.c): Rename to .h.
(remote.c, EXTRA_DIST): Reflect rename.
* daemon/remote.c: Likewise.
* daemon/remote_generator.pl: Likewise.
* src/Makefile.am (remote/remote_driver.c): Likewise.
* src/remote/remote_driver.c: Likewise.
* po/POTFILES.in: Likewise.
* cfg.mk (exclude_file_name_regexp--sc_require_config_h)
(exclude_file_name_regexp--sc_require_config_h_first)
(exclude_file_name_regexp--sc_prohibit_empty_lines_at_EOF):
Likewise.
This patch just covers the simple functions without explicit return
values. There is more to be handled.
The generator collects the members of the XDR argument structs and uses
this information to generate the function bodies.
Exclude the generated files from offending syntax-checks.
Suggested by Richard W.M. Jones
Creating a domU on a freshly booted dom0 does not work,
because the libxl driver does not allocate memory for the domU.
After creating a domain with xl libvirt is able to create domains too.
This patch reserves enough memory for the domU first.
The rule of thumb is that any file generated by config.status
is a) reproducible by any user, b) dependent on configure options.
Therefore, it is inappropriate to include such generated files
in the tarball (for proof, Makefile is generated from Makefile.in;
the former is not in the tarball while the latter is).
* Makefile.am (EXTRA_DIST): Remove files covered by AC_OUTPUT.
Users often edit XML file stored in configuration directory
thinking of modifying a domain/network/pool/etc. Thus it is wise
to let them know they are using the wrong way and give them hint.
When setting up a FIFO for QEMU, it allows either a pair
of fifos used unidirectionally, or a single fifo used
bidirectionally. Look for the bidirectional fifo first
when labelling since that is more useful
* src/security/security_dac.c,
src/security/security_selinux.c: Fix fifo handling
As well as taint warnings going to the main libvirt log,
add taint warnings to the per-domain logfile
Domain id=3 is tainted: high-privileges
Domain id=3 is tainted: disk-probing
Domain id=3 is tainted: shell-scripts
Domain id=3 is tainted: custom-monitor
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Enhance
qemuDomainTaint to also log to the domain logfile
* src/qemu/qemu_driver.c: Pass -1 for logFD to taint methods to
auto-append to logfile
* src/qemu/qemu_process.c: Pass open logFD at startup for taint
methods
The qemuDomainAppendLog method allows writing a formatted string
to the end of the domain logfile, optionally opening it if needed.
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add
qemuDomainAppendLog
Move the qemuProcessLogReadFD and qemuProcessLogFD methods
into qemu_domain.c, renaming them to qemuDomainCreateLog
and qemuDomainOpenLog.
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add
qemuDomainCreateLog and qemuDomainOpenLog.
* src/qemu/qemu_process.c: Remove qemuProcessLogFD
and qemuProcessLogReadFD
Wire up logging of VM tainting to the QEMU driver
- If running QEMU as root user/group or without capabilities
being cleared
- If passing custom QEMU command line args
- If issuing custom QEMU monitor commands
- If using a network interface config with an associated
shell script
- If using a disk config relying on format probing
The warnings, per-VM appear in the main libvirtd logs
11:56:17.571: 10832: warning : qemuDomainObjTaint:712 : Domain id=1 name='l2' uuid=c7a3edbd-edaf-9455-926a-d65c16db1802 is tainted: high-privileges
11:56:17.571: 10832: warning : qemuDomainObjTaint:712 : Domain id=1 name='l2' uuid=c7a3edbd-edaf-9455-926a-d65c16db1802 is tainted: disk-probing
The taint flags are reset when the VM is stopped.
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Helper APIs
for logging taint warnings
* src/qemu/qemu_driver.c: Log tainting with custom QEMU monitor
commands and disk/net hotplug with unsupported configs
* src/qemu/qemu_process.c: Log tainting at startup based on
unsupported configs
Some configuration setups for guests are allowed, but strongly
discouraged and unsupportable in production systems. Introduce
a concept of 'tainting' to virDomainObjPtr to allow such setups
to be identified. Drivers can then log warnings at suitable
times
* src/conf/domain_conf.c, src/conf/domain_conf.h: Declare taint
flags and add parsing/formatting of domain status XML
Print the name of the CA cert, certificate, and key file that resulted
in the failure so that the user has an idea what to troubleshoot.
Signed-off-by: Doug Goldstein <cardoe@gentoo.org>
Match the fact that we have virAsprintf and virVasprintf.
* src/util/buf.h (virBufferVasprintf): New prototype.
* src/util/buf.c (virBufferAsprintf): Move guts...
(virBufferVasprintf): ...to new function.
* src/libvirt_private.syms (buf.h): Export it.
* bootstrap.conf (gnulib_modules): Add stdarg, for va_copy.
We already have virAsprintf, so picking a similar name helps for
seeing a similar purpose. Furthermore, the prefix V before printf
generally implies 'va_list', even though this variant was '...', and
the old name got in the way of adding a new va_list version.
global rename performed with:
$ git grep -l virBufferVSprintf \
| xargs -L1 sed -i 's/virBufferVSprintf/virBufferAsprintf/g'
then revert the changes in ChangeLog-old.
The qemuMigrationToFile method was accidentally annotated for
the 'compressor' parameter to be non-null, instead of the
'path' parameter. Thus GCC with -O2, unhelpfully deleted the
entire 'if (compressor == NULL)' block of code during
optimization. Thus NULL was passed to virCommandNew() with
predictably bad results.
* src/qemu/qemu_migration.h: Fix non-null annotation to be
against path instead of compressor
To cope with the QEMU binary being changed while a VM is running,
it is neccessary to persist the original qemu capabilities at the
time the VM is booted.
* src/qemu/qemu_capabilities.c, src/qemu/qemu_capabilities.h: Add
an enum for a string rep of every capability
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Support for
storing capabilities in the domain status XML
* src/qemu/qemu_process.c: Populate & free QEMU capabilities at
domain startup
* configure.ac libvirt.spec.in docs/news.html.in: update and document
the release
* po/*.po*: update localizations for german, polish, spanish, ukrainian
and vietnamese coming from transifex, regenerate
In Fedora 15, with clang 2.8, 'scan-build env' shows:
CCC_ANALYZER_ANALYSIS=-analyzer-check-objc-mem -analyzer-check-security-syntactic -analyzer-check-dead-stores -analyzer-check-objc-unused-ivars -analyzer-check-objc-methodsigs
But in rawhide, with clang 2.9, the same variable is set but
empty, implying the default set of analysis. We still want
sa_assert defined in that case, to stop clang from hitting
false positives.
* configure.ac (STATIC_ANALYSIS): Detect clang even when the set
of analyses is the default.
Add missing early exits and convert error logging to proper API level
error reporting.
Centralize cleanup code for the PerfQuerySpec object.
Reported by Eric Blake, detected by clang.
Clang found three instances of uninitialized use of nparams in
the cleanup path. Unfortunately, one is a false positive: clang
couldn't see that ret->params.params_val is guaranteed to be
NULL unless allocated within a function, and that nparams is
guaranteed to be assigned prior to the allocation; hoisting the
assignment to nparams to be earlier in the function shuts up
that false positive. But two of the reports also happened to
highlight a real bug - the error path can dereference NULL.
Regression introduced in commit 158ba873.
* daemon/remote.c (remoteDispatchDomainGetMemoryParameters)
(remoteDispatchDomainGetBlkioParameters): Don't clear fields if
array was not allocated.
(remoteDispatchDomainGetSchedulerParameters): Initialize nparams
earlier.
The ++ on preliminaryFileName was a left over from a previous version
of this function that explicitly returned the filename and did a strdup
on preliminaryFileName afterwards.
As the filename isn't returned explicitly anymore remove the preliminary
variable for it and reuse the tmp variable instead.
Reported by Eric Blake, detected by clang.
Clang warned about a dead assignment. In the process, I noticed
that we are only using the function for a bool value. I audited
all other callers in qemu_{migration,cgroup,driver,hotplug), and
all were making the call in a bool context.
Also, do bounds checking on the argument.
* src/qemu/qemu_cgroup.c (qemuSetupCgroup): Delete dead
assignment.
(qemuCgroupControllerActive): Change return type to bool.
* src/qemu/qemu_cgroup.h (qemuCgroupControllerActive): Likewise.
Clang noticed a dead assignment, which turned out to be the use
of the wrong variable. rc starts life as -1, and is only ever
assigned to 0 just before a successful cleanup.
* src/lxc/lxc_driver.c (lxcSetupInterfaces): Don't call
virReportSystemError(-1).
Detected by gcc:
libxl/libxl_driver.c: In function 'libxlDomainDestroy':
libxl/libxl_drier.c:1351:30: error: variable 'priv' set but not used [-Werror=unused-but-set-variable]
* src/libxl/libxl_driver.c (libxlDomainDestroy): Delete unused
variable.
clang didn't like the last increment to nargs. But why even
track nargs ourselves, when virCommand does it for us?
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIConnection): Switch to virCommand to avoid
a dead-store warning on nargs.
Clang detected a dead store to rc. It turns out that in fixing this,
I also found a FILE* leak.
This is a subtle change in behavior, although unlikely to hit. The
pidfile is a kernel file, so we've probably got more serious problems
under foot if we fail to parse one. However, the previous behavior
was that even if one pid file failed to parse, we tried others,
whereas now we give up on the first failure. Either way, though,
the function returns -1, so the caller will know that something is
going wrong, and that not all pids were necessarily reaped. Besides,
there were other instances already in the code where failure in the
inner loop aborted the outer loop.
* src/util/cgroup.c (virCgroupKillInternal): Abort rather than
resuming loop on fscanf failure, and cleanup file on error.
Clang 2.8 wasn't quite able to follow that persistentDef was
assigned earlier if (flags & VIR_DOMAIN_MEM_CONFIG) is true.
Silence this false positive, to make clang analysis easier to use.
* src/qemu/qemu_driver.c (qemudDomainSetMemoryFlags): Add an
annotation to silence clang's claim of a NULL dereference.
Clang detected that vol-download will call unlink(NULL) if there
is a parse error during option parsing. Also, mingw doesn't like
unlinking an open file.
* tools/virsh.c (cmdVolDownload): Only unlink file if created.
Clang detected a null-pointer dereference regression, introduced
in commit 4e8969eb. Without this patch, a device with
unbind_from_stub set to false would eventually try to call
virFileExists on uncomputed drvdir.
* src/util/pci.c (pciUnbindDeviceFromStub): Ensure drvdir is set
before use.
This code has had problems historically. As originally
written, in commit 6bcf2501 (Jun 08), it could call unlink
on a random string, nuking an unrelated file.
Then commit 182a80b9 (Sep 09), the code was rewritten to
allocate tmp, with both a use-after-free bug and a chance to
call unlink(NULL).
Commit e206946 (Mar 11) fixed the use-after-free, but not the
NULL dereference. Thanks to clang for catching this!
* src/qemu/qemu_driver.c (qemudDomainMemoryPeek): Don't call
unlink on NULL.
This reverts commit 0e7f7f8566.
From the mailing list:
> So, AFAICT, this patch means we will never reconnect to any LXC
> VMs now.
>
> The correct solution, is to refactor LXC driver startup to work
> the same way as the QEMU driver startup.
>
> - Load all the live state XML files (to pick up running VMs)
> - Reconnect to all VMs
> - Load all the persistent config XML files (to pick up any additional
> inactive guets)
But that solution is invasive enough to be post-0.9.1.
../../tests/xmconfigtest.c: In function 'testCompareParseXML':
../../tests/xmconfigtest.c:49:19: error: 'conn' may be used uninitialized in this function [-Wuninitialized]
* tests/xmconfigtest.c (testCompareParseXML): Initialize variable.
This commit fixes
qemu/qemu_driver.c: In function 'qemuDomainModifyDeviceFlags':
qemu/qemu_driver.c:4041:8: warning: 'ret' may be used uninitialized in this
function [-Wuninitialized]
qemu/qemu_driver.c:4013:9: note: 'ret' was declared here
The variable is set to -1 so that the error paths are taken when the code
to set it didn't get a chance to run. Without initializing it, we could
return some an undefined value from this function.
While I was at it, I made a trivial whitespace change in the same function
to improve readability.
For IEEE 802.1Qbg, it is necessary to use a VLAN interface.
vepa itself does not require a VLAN interface.
Signed-off-by: Gerhard Stenzel <stenzel at de.ibm.com>
Make virtTestLoadFile allocate the buffer to read the file into.
Fix logic error in virtTestLoadFile, stop reading on the first empty line.
Use virFileReadLimFD in virtTestCaptureProgramOutput to avoid manual
buffer handling.
Commit 36deff04 introduced a regression due to which virsh is not able
to log to a file - msg_buf was changed from an array to a pointer
without corresponding change to usage of "sizeof()".
Fix regression in virsh logging
Signed-off-by: Supriya Kannery <supriyak@in.ibm.com>
Call shutdown functions for all subcomponents in nwfilterDriverShutdown.
Make sure that this shutdown functions can safely be called multiple times
and independent from the actual subcomponents state.
Commit e0d014f237 made binary potentially allocated on the heap.
It was freed in the parent in the error path, but not in the success path
that doesn't goto the cleanup label.
Found by 'make -C tests valgrind'.
Commit 1671d1d introduced a memory leak in virHashFree, and
wholesale table corruption in virHashRemoveSet (elements not
requested to be freed are lost).
* src/util/hash.c (virHashFree): Free bucket array.
(virHashRemoveSet): Don't lose elements.
* tests/hashtest.c (testHashCheckForEachCount): New method.
(testHashCheckCount): Expose the bug.
Tried to dredge through old changelogs and commits to come up with it, so
may not be completely accurate.
v2:
Drop ambiguous 'containers'
Use same mail archive for all links
A few of the tests were missing basic sanity checks, while most
of them were doing copy-and-paste initialization (in fact, some
of them pasted the argc > 1 check more than once!). It's much
nicer to do things in one common place, and minimizes the size of
the next patch that fixes getcwd usage.
* tests/testutils.h (EXIT_AM_HARDFAIL): New define.
(progname, abs_srcdir): Define for all tests.
(VIRT_TEST_MAIN): Change callback signature.
* tests/testutils.c (virtTestMain): Do more common init.
* tests/commandtest.c (mymain): Simplify.
* tests/cputest.c (mymain): Likewise.
* tests/esxutilstest.c (mymain): Likewise.
* tests/eventtest.c (mymain): Likewise.
* tests/hashtest.c (mymain): Likewise.
* tests/networkxml2xmltest.c (mymain): Likewise.
* tests/nodedevxml2xmltest.c (myname): Likewise.
* tests/nodeinfotest.c (mymain): Likewise.
* tests/nwfilterxml2xmltest.c (mymain): Likewise.
* tests/qemuargv2xmltest.c (mymain): Likewise.
* tests/qemuhelptest.c (mymain): Likewise.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2xmltest.c (mymain): Likewise.
* tests/qparamtest.c (mymain): Likewise.
* tests/sexpr2xmltest.c (mymain): Likewise.
* tests/sockettest.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* tests/storagepoolxml2xmltest.c (mymain): Likewise.
* tests/storagevolxml2xmltest.c (mymain): Likewise.
* tests/virbuftest.c (mymain): Likewise.
* tests/virshtest.c (mymain): Likewise.
* tests/vmx2xmltest.c (mymain): Likewise.
* tests/xencapstest.c (mymain): Likewise.
* tests/xmconfigtest.c (mymain): Likewise.
* tests/xml2sexprtest.c (mymain): Likewise.
* tests/xml2vmxtest.c (mymain): Likewise.
We don't use gnulib's sanitizations for vfprintf, but vshDebug
was used with %zu, which means that it would fail on mingw.
Thank goodness the compiler indirectly caught this for us :)
virsh.c: In function 'vshDebug':
virsh.c:12105:5: warning: function might be possible candidate for
'ms_printf' format attribute [-Wmissing-format-attribute]
since mingw <stdio.h> hasn't yet added gcc attributes to vfprintf.
* tools/virsh.c (vshDebug): Avoid vfprintf.
(vshPrintExtra): Use lighter-weight fputs.
Reported by Matthias Bolte.
Support update of disks by MODIFY_CONFIG
This patch includes changes for qemu's disk to support
virDomainUpdateDeviceFlags() with VIR_DOMAIN_DEVICE_MODIFY_CONFIG.
This patch adds support for CDROM/foppy disk types.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
* src/qemu/qemu_driver.c
(qemuDomainUpdateDeviceConfig): support cdrom/floppy.
V2: Use virAsprintf instead of snprintf/strdup
The xend driver will generate a virDomainNetDef ifname if one is not
specified in xend sexpr, even if domain is inactive. The result is
network interface XML containing 'vif-1.Y' on dev attribute of target
element, e.g.
<interface type='bridge'>
<target dev='vif-1.0'/>
...
This patch changes the behavior to only generate the ifname if not
specified in xend sexpr *and* domain is not inactive (id != -1).
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=664059
Reattaching pci device back to host without destroying guest or
detaching device from guest would cause host to crash. This patch adds
a check before doing device reattach. If the device is being assigned
to guest, libvirt refuses to reattach device to host. The patch only
works for Xen, for it just checks xenstore to get pci device
information.
Signed-off-by: Yufang Zhang <yuzhang@redhat.com>
The lone caller to hostsFileWrite (and the callers for at least 3
levels up the return stack) assume that the return value will be < 0
on failure. However, hostsFileWrite returns 0 on success, and a
positive errno on failure. This patch changes hostsFileWrite to return
-errno on failure.
We support to initialize the hooks at daemon reload if there is no
hooks script is defined, we should also support initialize the hooks
at daemon shutdown if no hooks is defined.
To address bz: https://bugzilla.redhat.com/show_bug.cgi?id=688859
This patch does the following things:
1. The return value of cmdSchedInfoUpdate() can be -1, 0 and 1. So the
type of return value should be int not bool.(This function is not a
entry of a virsh command, but the name of this function likes cmdXXX)
2. The type of cmdSchedinfo()'s, cmdFreecell()'s, cmdPoolList()'s and
cmdVolList()'s return value is bool not int, so change the type of
variable ret_val, func_ret and functionReturn.
3. Add a variable functionReturn for cmdMigrate(), cmdAttachInterface(),
cmdDetachInterface(), cmdAttachDisk() and cmdDetachDisk() to save the
return value.
4. Change the type of variable ret in the function cmdAttachDevice(),
cmdDetachDevice(), cmdUpdateDevice(), cmdAttachInterface(),
cmdDetachInterface(), cmdAttachDisk() and cmdDetachDisk() to int, as
we use it to save the return value of virXXX() and the type of virXXX()'s
return value is int not bool.
5. Do some cleanup when virBuff.error is 1.
The bug 1-4 were introduced by commit b56fa5bb.
Support changes of disks by MODIFY_CONFIG for qemu.
This patch includes patches for qemu's disk to support
virDomainAt(De)tachDeviceFlags with VIR_DOMAIN_DEVICE_MODIFY_CONFIG.
Other devices can be added incrementally.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
* /src/conf/domain_conf.c
(virDomainDiskIndexByName): returns array index of disk in vmdef.
(virDomainDiskRemoveByName): removes a disk which has the name in vmdef.
* src/qemu/qemu_driver.c
(qemuDomainAttachDeviceConfig): add support for Disks.
(qemuDomainDetachDeviceConfig): add support for Disks.
This patch adds functions for modify domain's persistent definition.
To do error recovery in easy way, we use a copy of vmdef and update it.
The whole sequence will be:
make a copy of domain definition.
if (flags & MODIFY_CONFIG)
update copied domain definition
if (flags & MODIF_LIVE)
do hotplug.
if (no error)
save copied one to the file and update cached definition.
else
discard copied definition.
This patch is mixuture of Eric Blake's work and mine.
From: Eric Blake <eblake@redhat.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
(virDomainObjCopyPersistentDef): make a copy of persistent vm definition
(qemuDomainAttach/Detach/UpdateDeviceConfig) : callbacks. now empty
(qemuDomainModifyDeviceFlags): add support for MODIFY_CONFIG and MODIFY_CURRENT
So far first entries for each hash key are stored directly in the hash
table while other entries mapped to the same key are linked through
pointers. As a result of that, the code is cluttered with special
handling for the first items.
This patch makes all entries (even the first ones) linked through
pointers, which significantly simplifies the code and makes it more
maintainable.
This adds several tests for remaining hash APIs (custom
hasher/comparator functions are not covered yet, though).
All tests pass both before and after the "Simplify hash implementation".
If one specify "--with-python=yes" but no python-devel package
is installed, we ignore it with just a notice message, which
doesn't give clear guide to user.
Steps to reproduce this bug:
1. # cat net.xml # 00:03.0 has been used
<interface type='network'>
<mac address='52:54:00:04:72:f3'/>
<source network='default'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>
2. # virsh attach-device vm1 net.xml
error: Failed to attach device from net.xml
error: internal error unable to reserve PCI address 0:0:3
3. # virsh attach-device vm1 net.xml
error: Failed to attach device from net.xml
error: internal error unable to execute QEMU command 'device_add': Device 'rtl8139' could not be initialized
The reason of this bug is that: we can not reserve PCI address 0:0:3 because it has
been used, but we release PCI address when we reserve it failed.
When buf->error is 1, we do not return buf->content in the function
virBufferContentAndReset(). So we should free buf->content when
vsnprintf() failed.
This was broken by the refactoring in ac1e6586ec. It resulted in a
segfault for 'virsh vol-dumpxml' and related volume functions.
Before the refactoring all users of the ESX_VI__TEMPLATE__DISPATCH
macro dispatched on the item type, as the item is the input to all those
functions.
Commit ac1e6586ec made the dynamically dispatched CastFromAnyType
functions use this macro too, but this functions dispatched on the
actual type of the AnyType object. The item is the output of the
CastFromAnyType functions.
This difference was missed in the refactoring, making CastFromAnyType
functions dereferencing the item pointer that is NULL at the time of
the dispatch.
Found by 'make -C tests valgrind'.
xen_xm.c: Dummy allocation via virDomainChrDefNew is directly
overwritten and lost. Free 'script' in success path too.
vmx.c: Free virtualDev_string in success path too.
domain_conf.c: Free compression in success path too.
We can exploit the fact that gcc warns about int-to-pointer conversion
in ternary cond?(void*):(int) in order to prevent future mistakes of
calling VIR_FREE on a scalar lvalue. For example, between commits
158ba873 and 802e2df, we would have had this warning:
cc1: warnings being treated as errors
remote.c: In function 'remoteDispatchListNetworks':
remote.c:3684:70: error: pointer/integer type mismatch in conditional expression
There are still a number of places that malloc into a const char*;
while it would probably be worth scrubbing them to use char*
instead, that is a separate patch, so we have to cast away const
in VIR_FREE for now.
* src/util/memory.h (VIR_FREE): Make gcc warn about integers.
Iteratively developed from a patch by Christophe Fergeau.
mingw lacks the counterpart to PTHREAD_MUTEX_INITIALIZER, so the
best we can do is portably expose once-only runtime initialization.
* src/util/threads.h (virOnceControlPtr): New opaque type.
(virOnceFunc): New callback type.
(virOnce): New prototype.
* src/util/threads-pthread.h (virOnceControl): Declare.
(VIR_ONCE_CONTROL_INITIALIZER): Define.
* src/util/threads-win32.h (virOnceControl)
(VIR_ONCE_CONTROL_INITIALIZER): Likewise.
* src/util/threads-pthread.c (virOnce): Implement in pthreads.
* src/util/threads-win32.c (virOnce): Implement in WIN32.
* src/libvirt_private.syms: Export it.
This patch strips reusable part of qemuDomainUpdateDeviceFlags()
and consolidate it to qemuDomainModifyDeviceFlags().
No functional changes.
* src/qemu/qemu_driver.c
(qemuDomainChangeDiskMediaLive) : pulled out code for updating disks.
(qemuDomainUpdateDeviceLive) : core of UpdateDevice, extracted from
UpdateDeviceFlags()
(qemuDomainModifyDeviceFlags): add support for updating device in live domain.
(qemuDomainUpdateDeviceFlags): reworked as a wrapper function of
qemuDomainModifyDeviceFlags()
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
clean up At(De)tachDeviceFlags() for consolidation.
qemuDomainAttachDeviceFlags()/qemuDomainDetachFlags()/
qemuDomainUpdateDeviceFlags() has similar logics and copied codes.
This patch series tries to unify them to use shared code when it can.
At first, clean up At(De)tachDeviceFlags() and devide it into functions.
By this, this patch pulls out shared components between functions.
Based on patch series by Eric Blake, I added some modification as
switch-case with QEMU_DEVICE_ATTACH, QEMU_DEVICE_DETACH, QEMU_DEVICE_UPDATE
* src/qemu/qemu_driver.c
(qemuDomainAt(De)tachDeviceFlags) : pulled out to qemuDomainModifyDeviceFlags()
(qemuDomainModifyDeviceFlags) : implements generic code for modifying domain.
(qemuDomainAt(De)tachDeviceFlagsLive) : code for at(de)taching devices to
domain in line. no changes in logic from old code.
(qemuDomainAt(De)tachDeviceDiskLive) : for at(de)taching Disks.
(qemuDomainAt(De)tachDeviceControllerLive) : for at(de)taching Controllers
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Centralize device modification in the more flexible APIs, to allow future
honoring of additional flags. Explicitly reject the
VIR_DOMAIN_DEVICE_MODIFY_FORCE flag on attach/detach.
Based on Eric Blake<eblake@redhat.com>'s work.
* src/qemu/qemu_driver.c
(qemudDomainAttachDevice)(qemudDomainAttachDeviceFlags): Swap bodies,rename...
(qemudDomainDetachDevice, qemudDomainDetachDeviceFlags): Likewise.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Up to now we missed parser for cpuinfo on x390(x) machines. Those machines
have only 1 thread, core, socket. What is missing is information about
CPU frequency.
The two ends of the pipe used for feeding QEMU tunnelled
migration data were interchanged, so QEMU got given the
"write" end instead of the "read" end.
The qemuMigrationPrepareTunnel method was also immediately
closing the "write" end of the pipe, so the stream failed
to actually write anything.
* src/qemu/qemu_migration.c: Swap tunnelled migration
pipe FDs & don't close pipe given to stream
ARRAY_CARDINALITY is typed as size_t, not long; this matters on 32-bit
platforms:
hashtest.c: In function 'testHashRemoveForEach':
hashtest.c:114: error: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int' [-Wformat]
* tests/hashtest.c (testHashRemoveForEach): Use correct format.
Gnulib already guarantees <stdbool.h>, so it is easier to just
use the standardized spellings.
* tools/virsh.c (vshCmdDef): Change callback to return real bool.
(__vshControl): Change several fields to bool.
(vshCommandOptBool): Change return type.
All callers updated.
* tools/Makefile.am (virsh-net-edit.c, virsh-pool-edit.c):
Likewise.
Here is a new version of this patch:
https://www.redhat.com/archives/libvir-list/2011-April/msg00337.html
v2:
- store the cputune info for the whole runtime of the domain
- remove cputune info when domain is destroyed
The nodeGetInfo code had to be moved into a helper
function to reuse it without a virConnectPtr.
Rather than copying and pasting lots of code, factor it into a
single helper function.
This commit adds a warning if tighter integer parsing would fail
due to any stray bytes after the number, but should not change
any behavior other than the bug fix for phypNumDomainsGeneric
looking only at numeric lines.
* src/phyp/phyp_driver.c (phypExecInt): New function.
(phypGetVIOSPartitionID, phypNumDomainsGeneric, phypGetLparID)
(phypGetLparMem, phypGetLparCPUGeneric, phypGetRemoteSlot)
(phypGetVIOSNextSlotNumber, phypAttachDevice)
(phypGetStoragePoolSize, phypStoragePoolNumOfVolumes)
(phypNumOfStoragePools, phypInterfaceDestroy)
(phypInterfaceDefineXML, phypInterfaceLookupByName)
(phypInterfaceIsActive, phypNumOfInterfaces): Use it.
(phypNumDomainsGeneric): Correctly find numeric line.
This last minute addition caused a build failure
cc1: warnings being treated as errors
qemu/qemu_process.c: In function 'qemuProcessHandleWatchdog':
qemu/qemu_process.c:436:34: error: ignoring return value of 'virDomainObjUnref', declared with attribute warn_unused_result [-Wunused-result]
make[3]: *** [libvirt_driver_qemu_la-qemu_process.lo] Error 1
Replace some occurrances of
virDomainPtr domain;
virNetworkPtr network;
With
virDomainPtr dom;
virNetworkPtr net;
* daemon/remote.c: Fix variable naming to follow standard
Replace cases of
type = virConnectGetType(conn);
if (type == NULL)
goto cleanup;
With
if (!(type = virConnectGetType(conn)))
goto cleanup;
* daemon/remote.c: Write error checks in compat form
Replace all occurrances of
if (....) {
goto cleanup;
}
With
if (.....)
goto cleanup;
to save one line of code
* daemon/remote.c: Remove curly braces on single line conditionals
The libvirt APIs reserve any negative value for indicating an
error. Thus checks
if (virXXXX() == -1)
Should instead be
if (virXXXX() < 0)
* daemon/remote.c: s/ == -1/ < 0/
The dispatcher functions have numerous places where they
return to the caller. This leads to duplicated cleanup
code, often resulting in memory leaks. It makes it harder
to ensure that errors are dispatched before freeing objects,
which may overwrite the original error.
The standard pattern is now
remoteDispatchXXX(...) {
int rv = -1;
....
if (XXX < 0)
goto cleanup;
...
if (XXXX < 0)
goto cleanup;
...
rv = 0;
cleanup:
if (rv < 0)
remoteDispatchError(rerr);
...free all other stuff..
return rv;
}
* daemon/remote.c: Centralize all cleanup paths
* daemon/stream.c: s/remoteDispatchConnError/remoteDispatchError/
* daemon/dispatch.c, daemon/dispatch.h: Replace
remoteDispatchConnError with remoteDispatchError
removing unused virConnectPtr
To install it, disable libvirtd sysv initscript:
chkconfig libvirtd off
service libvirtd stop
and enable libvirtd upstart job:
cp /usr/share/doc/libvirt-*/libvirtd.upstart \
/etc/init/libvirtd.conf
initctl reload-configuration
initctl start libvirtd
Test:
initctl status libvirtd
libvirtd start/running, process 3929
killall -9 libvirtd
initctl status libvirtd
libvirtd start/running, process 4047
I looked into the possibility to use the upstart script from Ubuntu or
at least getting inspiration from it but that's not possible. "expect
daemon" is a nice thing but it only works if the process is defined with
exec stanza instead of script ... no script. Unfortunately, with exec
stanza environment variables can only be set within upstart script
(i.e., configuration in /etc/sysconfig/libvirtd can't work). Hence, we
need to use script stanza, source sysconfig, and execute libvirtd
without --daemon. For similar reasons we can't use limit stanza and need
to handle DAEMON_COREFILE_LIMIT in job's script.
This patch does the following two things:
1. hold an extra reference while handling watchdog event
If the domain is not persistent, and qemu quits unexpectedly before
calling processWatchdogEvent(), vm will be freed and the function
processWatchdogEvent() will be dangerous.
2. unlock qemu driver and vm before returning from processWatchdogEvent()
When the function processWatchdogEvent() failed, we only free wdEvent,
but forget to unlock qemu driver and vm, free dumpfile.
We do not lock qemu_driver when calling virThreadPoolNew(). If it failed,
we will unlock qemu_driver. It is dangerous.
We may use this pool during auto starting domains. So we must create it before
calling qemuAutostartDomains(). Otherwise, libvirtd will crash.
Also mark error messages in block_stats.c for translation, add the
new macro to the msg_gen functions in cfg.mk and add block_stats.c
to po/POTFILES.in
commit d4601696 introduces two more generated files: esx_vi.generated.h
and esx_vi.generated.h. But we do not include them into dist file.
It will break building if using dist file to build.
Regression introduced in 0.8.5, commit c1564268. The command
'virsh freecell 0' quit working when it changed from an optional
string to an optional integer.
This patch introduces a slight change that specifying an option
twice is now detected as an error. It also changes things so
that a command that has more than 1 required option will not
complain about missing options if one but not all of the options
were given in long format, as in 'virsh vol-create --pool p file',
as well as making positional parsing work for all optional
options (each positional argument is associated with the earliest
option that has not yet been seen by name).
Optional boolean options can appear before required argument
options, because they don't affect positional argument parsing,
and obviously a required boolean option makes no sense.
Technically, this patch renders VSH_OT_STRING and VSH_OT_DATA
redundant; but cleaning that up can be a separate patch.
No command should ever need more than 32 options, right? :)
* tools/virsh.c (vshCmddefGetData, vshCmddefGetOption)
(vshCommandCheckOpts): Alter parameters to use bitmaps.
(vshCmddefOptParse): New function.
(vshCommandParse): Update for better handling of positional
arguments.
(vshCmddefHelp): Allow unit tests to validate options.
The current state of virsh parsing is that:
$ virsh vol-info /path/to/image
$ virsh vol-info --pool default /path/to/image
$ virsh vol-info --pool default --vol /path/to/image
all lookup the volume by path (technically, the last two also attempt
a name lookup within a pool, whereas the first skips that step, but
the end result is the same); meanwhile:
$ virsh vol-info default /path/to/image
complains about unexpected data. Why? Because the --pool option is
optional, so default was parsed as the --vol argument, and
/path/to/image.img doesn't match up with any remaining options that
require an argument. For proof, note that:
$ virsh vol-info default --vol /path/to/image
complains about looking up 'default' - the parser mis-associated both
arguments with --vol. Given the above, the only way to specify pool
is with an explicit "--pool" argument (you can't specify it
positionally). However, named arguments can appear in any order, so:
$ virsh vol-info /path/to/image --pool default
$ virsh vol-info --vol /path/to/image --pool default
have also always worked. Therefore, this patch has no functional
change on vol-info option parsing, but only on 'virsh help vol-info'
synopsis layout. However, it also allows the next patch to 1) enforce
that required options are always first (without this patch, the next
patch would fail the testsuite), and 2) allow the user to omit the
"--pool" argument. That is, the next patch makes it possible to do:
$ virsh vol-info /path/to/image default
which to date was not possible.
* tools/virsh.c (opts_vol_create_from, opts_vol_clone)
(opts_vol_upload, opts_vol_download, opts_vol_delete)
(opts_vol_wipe, opts_vol_info, opts_vol_dumpxml, opts_vol_key)
(opts_vol_path): List optional pool parameter after required
arguments.
Use the name 'ret' for all phypExec results, to make it easier
to wrap phypExec. Don't allow a possibly NULL ret through printf.
* src/phyp/phyp_driver.c (phypBuildVolume, phypDestroyStoragePool)
(phypBuildStoragePool, phypBuildLpar): Avoid NULL dereference.
(phypInterfaceDestroy): Avoid redundant free.
(phypVolumeLookupByPath, phypVolumeGetPath): Use consistent
naming.
Ever since commit ebc46f, the destroy function built two command
variants but only used one. I went with the variant that matches
the idiom used in the counterpart of phypBuildStoragePool.
* src/phyp/phyp_driver.c (phypDestroyStoragePool): Avoid
clobbering cmd. Fix error message typo.
This warnings come from partly generated code. Therefore, the best
solution is to mark them as potentially being unused using the
ATTRIBUTE_UNUSED macro. This is suggested by the gcc documentation.
Reported by Christophe Fergeau
This patch addresses:
https://bugzilla.redhat.com/show_bug.cgi?id=694382
In order to give each libvirt-created bridge a fixed MAC address,
commit 5754dbd56d, added code to create
a dummy tap device with guaranteed lowest MAC address and attach it to
the bridge. This tap device was given the name "${bridgename}-nic".
However, an interface device name must be IFNAMSIZ (15) characters or
less, so a valid ${bridgename} such as "verylongname123" (15
characters) would lead to an invalid tap device name
("verylongname123-nic" - 19 characters), and that in turn led to a
failure to bring up the network.
The solution is to shorten the part of the original name used to
generate the tap device name. However, simply truncating it is
insufficient, because the last few characters of an interface name are
often a number used to indicate one of a list of several similar
devices (for example, "verylongname123", "verylongname124", etc) and
simple truncation would lead to duplicate names (eg "verlongnam-nic"
and "verylongnam-nic"). So instead we take the first 8 characters of
$bridgename ("verylong" in the example), add on the final 3 bytes
("123"), then add "-nic" (so "verylong123-nic"). Not pretty, but it
is much more likely to generate a unique name, and is reproducible
(unlike, say, a random number).
Due to differences in /proc/cpuinfo the parsing of the cpu data is
different between architectures. On PPC /proc/cpuinfo looks like this:
[original formatting with tabs]
processor : 0
cpu : PPC970MP, altivec supported
clock : 2297.700000MHz
revision : 1.1 (pvr 0044 0101)
processor : 1
cpu : PPC970MP, altivec supported
clock : 2297.700000MHz
revision : 1.1 (pvr 0044 0101)
[..]
timebase : 14318000
platform : pSeries
model : IBM,8844-AC1
machine : CHRP IBM,8844-AC1
The patch adapts the parsing of the data found in /proc/cpuinfo.
/sys/devices/system/cpu/cpuX/topology/physical_package_id also
always returns -1. Check for it on ppc and make it '0' if found negative.
This patch enables the migration of Qemu VMs between hosts of different endianess. I tested this by migrating a i686 VM between a x86 and ppc64 host.
I am converting the 'int's in the VM's state header to uint32_t assuming this doesn't break compatibility with existing deployments other than Linux.
gcc 4.6 warns when a variable is initialized but isn't used afterwards:
vmware/vmware_driver.c:449:18: warning: variable 'vmxPath' set but not used [-Wunused-but-set-variable]
This patch fixes these warnings. There are still 2 offending files:
- vbox_tmpl.c: the variable is used inside an #ifdef and is assigned several
times outside of #ifdef. Fixing the warning would have required wrapping
all the assignment inside #ifdef which hurts readability.
vbox/vbox_tmpl.c: In function 'vboxAttachDrives':
vbox/vbox_tmpl.c:3918:22: warning: variable 'accessMode' set but not used [-Wunused-but-set-variable]
- esx_vi_types.generated.c: the name implies it's generated code and I
didn't want to dive into the code generator
esx/esx_vi_types.generated.c: In function 'esxVI_FileQueryFlags_Free':
esx/esx_vi_types.generated.c:1203:3: warning: variable 'item' set but not used [-Wunused-but-set-variable]
Make: passed
Make check: passed
Make syntax-check: passed
this is the commit to introduce the function to create new character
device definition for the domain as advised by Cole Robinson
<crobinso@redhat.com>.
The function is used on the relevant places and also new tests has
been added.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
This extends the SPICE XML to allow variable compression settings for audio,
images and streaming:
<graphics type='spice' port='5901' tlsPort='-1' autoport='yes'>
<image compression='auto_glz'/>
<jpeg compression='auto'/>
<zlib compression='auto'/>
<playback compression='on'/>
</graphics>
All new elements are optional.
This fixes: https://bugzilla.redhat.com/show_bug.cgi?id=696660
While starting a network, if brSetForwardDelay() fails, we go to err1
where we want to access macTapIfName variable which was just
VIR_FREE'd a few lines above. Instead, keep macTapIfName until we are
certain of success.
The methods qemuDomain{Get,Set}{Memory,Blkio,Scheduler}Parameters
all forgot to do a check on virDomainIsActive(), resulting in bogus
error messages from later parts of their impl
* src/qemu/qemu_driver.c: Add missing checks on virDomainIsActive()
sizeof(domain->name) is the wrong thing. Instead of using strdup here
rewrite escape_specialcharacters to allocate the buffer itself.
Add a contains_specialcharacters to be used in phypOpen, as phypOpen is
not interested in the escaped version.
Don't pre-allocate 4kb per key, make phypVolumeGetKey allocate the memory.
Make phypBuildVolume return the volume key instead of using pre-allocated
memory to store it.
Also fix a memory leak in phypVolumeLookupByName when phypVolumeGetKey
fails. Fix another memory leak in phypVolumeLookupByPath in the success
path. Fix phypVolumeGetXMLDesc leaking voldef.key.
Move the virInterfacePtr declaration to the top of the
function to avoid jump uninitialized variable warnings
* src/phyp/phyp_driver.c: Fix var declaration
The daemon dispatcher code had an obsolete macro
#define REMOTE_DEBUG(fmt, ...) VIR_DEBUG(fmt, __VA_ARGS__)
This can be trivially removed
* daemon/remote.c: s/REMOTE_DEBUG/VIR_DEBUG/
Many functions did not check for whether a connection was
open. Replace the macro which obscures control flow, with
explicit checks, and ensure all dispatcher code has checks.
* daemon/remote.c: Add connection checks
A lot of code in libvirtd's dispatcher used the style
dom = get_nonnull_domain (conn, args->dom);
Instead of the normal libvirt style
dom = get_nonnull_domain(conn, args->dom);
* daemon/remote.c: Remove all whitelist before function brackets
This is the implementation of the previous patch now using virInterface*
API. Ended up this patch got much more simpler, smaller and easier to
review. Here is some details:
* MAC size and interface name are fixed due to specifications on HMC,
both are created automatically and CAN'T be specified from user. They
have the following format:
* MAC: 122980003002
* Interface name: U9124.720.067BE8B-V3-C0
* I did replaced all the |grep|sed following the comments Eric Blake
did on the last patch.
* According to my last email, It's not possible to create a network
interface without assigning it to a specific lpar. Then, I am using
this very minimalistic XML file for testing:
<interface type='ethernet' name='LPAR01'>
</interface>
In this file I am using "name" as the lpar name which I am going to
assign the new network interface. I couldn't find a better way to
refer to it. Comments are welcome.
* Regarding the fact I am sleeping one second waiting for the HMC to
complete creation of the interface, I don't have means to check
if the whole process is done. All I do is execute a command, wait
until is complete (which is not enough in this case) check
the return and the exit status. The process of actually creating
a networking interface seems to take a little longer than just the
return of the ssh control.
In qemuDomainObjBeginJobWithDriver, when virCondWaitUntil timeouts,
the function tries to call qemuDriverLock with virDomainObj locked,
this causes the dead-lock problem. This patch fixes this.
Commit 9677cd33ee made it possible to
remove current entry when iterating through all hash entries. However,
it didn't properly handle a special case of removing first entry
assigned to a given key which contains several entries in its collision
list.
Based on a smaller patch developed by Moritoshi Oshiro:
https://bugzilla.redhat.com/show_bug.cgi?id=693963
* tools/virsh.pod (freecell): Mention all, and clarify that
optional cellno requires --cellno.
This patch adds the new options (--live, --config, and --current) to
"virsh setmaxmem" command. The behavior of above options is the same
as that of "virsh setmem". When the --config option is specified, a
modification is effective for the persistent domain, while the --live
option is specified, a modification is effective for an active
domain. The --current option is specified, it affects a current
domain.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This patch implements the code to support virDomainSetMaxMemory API,
and to support VIR_DOMAIN_MEM_MAXIMUM flag in qemudDomainSetMemoryFlags function.
As a result, we can change the maximum memory size of inactive QEMU guests.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Move "returns" keyword from beginning of API doc lines
when it does not describe return values.
Maybe the API doc extractor could be changed to look for
"returns: " to avoid such confusion.
Aargh; commit 8ae5dfd still didn't fix the mingw problem, because
gnulib defined O_NONBLOCK to 0 for just mingw. I've now fixed
that in gnulib, but we need the latest pipe2 for libvirt to work.
* .gnulib: Update to latest, for pipe2 fixes.
Commit 02c39a2 introduced a mingw build regression, due to a
regression in gnulib's areadlink module:
../../../gnulib/lib/careadlinkat.c: In function 'careadlinkat':
../../../gnulib/lib/careadlinkat.c:143:39: error: 'const struct allocator' has no member named 'malloc'
* .gnulib: Update to latest, for careadlinkat fix.
The libexec program libvirt_iohelper is only for libvirtd. If we build rpm
without libvirtd, we will receive the following messages:
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/wency/rpmbuild/BUILDROOT/libvirt-0.9.0-1.el6.x86_64
error: Installed (but unpackaged) file(s) found:
/usr/libexec/libvirt_iohelper
This patch adds support for the evaluation of TCP flags in nwfilters.
It adds documentation to the web page and extends the tests as well.
Also, the nwfilter schema is extended.
The following are some example for rules using the tcp flags:
<rule action='accept' direction='in'>
<tcp state='NONE' flags='SYN/ALL' dsptportstart='80'/>
</rule>
<rule action='drop' direction='in'>
<tcp state='NONE' flags='SYN/ALL'/>
</rule>
This patch adds the new option (--current) to the "virsh setmem" command.
When --current option is specified, it affects a "current" domain.
The word "current" denotes that if a domain is running, it affects
a running domain only; otherwise it affects a persistent domain.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This patch adds virDomainSetMemoryFlags(,,VIR_DOMAIN_MEM_CURRENT) support
code to qemu driver.
Also, change virDomainObjIsActive to return bool, given its usage.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This patch introduces VIR_DOMAIN_MEM_CURRENT flag and
modifies virDomainSetMemoryFlags function to support it.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
When the new maximum memory size becomes less than the current memory size,
I think it is not the libvirt client but the each driver that decides the behavior
(reject the operation or shrink the current memory size).
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
* .gnulib: Update to latest, for pipe2.
* bootstrap.conf (gnulib_modules): Add pipe2.
* src/util/event_poll.c (virEventPollInit): Use it, to avoid
problematic virSetCloseExec on mingw.
Make it so we don't have to 'git add -f' particular files like
po/POTFILES.in all the time (tested by fixing one of our
special-case files as part of the patch).
* .gnulib: Update to latest.
* bootstrap: Resync from coreutils.
* .gitignore: Sort whitelist entries correctly, including ignoring
files rather than directories.
* m4/virt-compile-warnings.m4: Convert tabs to space.
It was just pointed out that, although I added documentation for the
IPv6 additions to the network XML, I neglected to use those additions
in the examples. This patch adds an IPv6 address to each of the
examples except for the "default" network, since that is a faithful
reproduction of the default network config that's automatically
installed, which doesn't include any IPv6 address (for good reason -
because there is no such thing as IPv6 NAT, there is no one IPv6
address that would work for all installations).
1) Both "qemuDomainStartWithFlags" and "qemuAutostartDomain" try to
restore the domain from managedsave'ed image if it exists (by
invoking "qemuDomainObjRestore"), but it unlinks the image even
if restoring fails, which causes data loss. (This problem exists
for "virsh managedsave dom; virsh start dom").
The fix for is to unlink the managed state file only if restoring
succeeded.
2) For "virsh save dom; virsh restore dom;", it can cause data
corruption if one reuse the saved state file for restoring. Add
doc to tell user about it.
3) In "qemuDomainObjStart", if "managed_save" is NULL, we shouldn't
fallback to start the domain, skipping it to cleanup as a incidental
fix. Discovered by Eric.
We should bind pci device to original driver when pciBindDeviceToStub() failed.
If the pci device is not bound to any driver before calling pciBindDeviceToStub(),
we should only unbind it from pci-stub. If it is bound to pci-stub, we should not
unbind it from pci-stub.
This patch do the following things:
1. rename the function as 'Unbind' is better than 'UnBind'.
2. pciUnbindDeviceFromStub() will be used in the function pciBindDeviceToStub() in
next patch. Float it up, instead of having to have a forward declaration
In file included from util/threads.c:31:
util/threads-pthread.c: In function 'virThreadSelfID':
util/threads-pthread.c:214: warning: cast from function call of type 'pthread_t' to non-matching type 'int' [-Wbad-function-cast]
* src/util/threads-pthread.c (virThreadSelfID) [!SYS_gettid]:
Add intermediate cast to silence gcc.
With gcc 4.3.4 I'm seeing the following warning failure
cc1: warnings being treated as errors
cc1: error: -funit-at-a-time is required for inlining of functions
that are only called once [-Wdisabled-optimization]
Add -funit-at-a-time to WARN_CFLAGS.
We're seeing bugs apparently resulting from thread unsafety of
libpciaccess, such as
https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/726099
To prevent those, as suggested by danpb on irc, move the
nodeDeviceLock(driverState) higher into the callers. In
particular:
udevDeviceMonitorStartup should hold the lock while calling
udevEnumerateDevices(), and udevEventHandleCallback should hold it
over its entire execution.
It's not clear to me whether it is ok to hold the
nodeDeviceLock while taking the virNodeDeviceObjLock(dev) on a
device. If not, then the lock will need to be dropped around
the calling of udevSetupSystemDev(), and udevAddOneDevice()
may not actually be safe to call from higher layers with the
driverstate lock held.
libvirt 0.8.8 with this patch on it seems to work fine for me.
Assuming it looks ok and I haven't done anything obviously dumb,
I'll ask the bug submitters to try this patch.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
This patch adds max_processes option to qemu.conf which can be used to
override system default limit on number of processes that are allowed to
be running for qemu user.
cc1: warnings being treated as errors
libxl/libxl_driver.c: In function 'libxlDomainSetVcpusFlags':
libxl/libxl_driver.c:1570:14: error: cast from function call of type 'double' to non-matching type 'unsigned int' [-Wbad-function-cast]
libxl/libxl_driver.c:1578:15: error: cast from function call of type 'double' to non-matching type 'unsigned int' [-Wbad-function-cast]
This was the only use of floor() and ceil(), and floating-point
is overkill for power-of-two manipulations.
* src/libxl/libxl_driver.c (libxlDomainSetVcpusFlags): Avoid -lm
for trivial computations.
The systemtap directory for tapsets is called
/usr/share/systemtap/tapset
Not
/usr/share/systemtap/tapsets
* daemon/Makefile.am,libvirt.spec.in: s/tapsets/tapset/
The GCC Win32 compiler will claim to support -fstack-protector,
but if it actually gets triggered by a suitable code pattern,
linking will fail. Other non-Linux OS likely suffer the same
way with gcc.
* m4/virt-compile-warnings.m4: Only use stack protector when
the build target is Linux.
GCC is a little confused about the cast of beginthread/beginthreadex
from unsigned long -> void *. Go via an intermediate variable avoids
the bogus warning, and makes the code a little cleaner
* src/util/threads-win32.c: Avoid compiler warning in cast
The SCSI volumes get a better 'key' field based on the fully
qualified volume path. All SCSI volumes have a unique serial
available in hardware which can be obtained by sending a
suitable SCSI command. Call out to udev's 'scsi_id' command
to fetch this value
* src/storage/storage_backend_scsi.c: Improve volume key
field value stability and uniqueness
When initializing qemu guest capabilities, we should ignore qemu
binaries that we are not able to extract version/help info from since
they will be unusable for creating domains anyway. Ignoring them is also
much better than letting initialization of qemu driver fail.
A couple of functions were declared using the old style foo()
for no-parameters, instead of foo(void)
* src/xen/xen_hypervisor.c, tests/testutils.c: Replace () with (void)
in some function declarations
* m4/virt-compile-warnings.m4: Enable -Wold-style-definition
Split the bit acinclude.m4 file into smaller pieces named
as m4/virt-XXXXX.m4
* .gitignore: Ignore gettext related files
* acinclude.m4: Delete
* m4/virt-compile-warnings.m4: Checks for GCC compiler flags
* m4/virt-pkgconfig-back-compat.m4: Backcompat check for
pkgconfig program
Remove custom code for checking compiler warnings, using
gl_WARN_ADD instead. Don't list all flags ourselves, use
gnulib's gl_MANYWARN_ALL_GCC to get all possible GCC flags,
then turn off the ones we don't want yet.
* acinclude.m4: Rewrite to use gl_WARN_ADD and gl_MANYWARN_ALL_GCC
* bootstrap.conf: Add warnings & manywarnings
* configure.ac: Switch to gl_WARN_ADD
* m4/compiler-flags.m4: Obsoleted by gl_WARN_ADD
Replace openvz_readline with getline in several places to get rid of stack
allocated buffers to hold lines.
openvzReadConfigParam allocates memory for return values instead of
expecting a preexisting buffer.
This patch enables the relative backing file path support provided by
qemu-img create.
If a relative path is specified for the backing file, it is converted
to an absolute path using the storage pool path. The absolute path is
used to verify that the backing file exists. If the backing file exists,
the relative path is allowed and will be provided to qemu-img create.
Even with -Wuninitialized (which is part of autobuild.sh
--enable-compile-warnings=error), gcc does NOT catch this
use of an uninitialized variable:
{
if (cond)
goto error;
int a = 1;
error:
printf("%d", a);
}
which prints 0 (supposing the stack started life wiped) if
cond was true. Clang will catch it, but we don't use clang
as often. Using gcc -Wjump-misses-init catches it, but also
gives false positives:
{
if (cond)
goto error;
int a = 1;
return a;
error:
return 0;
}
Here, a was never used in the scope of the error block, so
declaring it after goto is technically fine (and clang agrees).
However, given that our HACKING already documents a preference
to C89 decl-before-statement, the false positive warning is
enough of a prod to comply with HACKING.
[Personally, I'd _really_ rather use C99 decl-after-statement
to minimize scope, but until gcc can efficiently and reliably
catch scoping and uninitialized usage bugs, I'll settle with
the compromise of enforcing a coding standard that happens to
reject false positives if it can also detect real bugs.]
* acinclude.m4 (LIBVIRT_COMPILE_WARNINGS): Add -Wjump-misses-init.
* src/util/util.c (__virExec): Adjust offenders.
* src/conf/domain_conf.c (virDomainTimerDefParseXML): Likewise.
* src/remote/remote_driver.c (doRemoteOpen): Likewise.
* src/phyp/phyp_driver.c (phypGetLparNAME, phypGetLparProfile)
(phypGetVIOSFreeSCSIAdapter, phypVolumeGetKey)
(phypGetStoragePoolDevice)
(phypVolumeGetPhysicalVolumeByStoragePool)
(phypVolumeGetPath): Likewise.
* src/vbox/vbox_tmpl.c (vboxNetworkUndefineDestroy)
(vboxNetworkCreate, vboxNetworkDumpXML)
(vboxNetworkDefineCreateXML): Likewise.
* src/xenapi/xenapi_driver.c (getCapsObject)
(xenapiDomainDumpXML): Likewise.
* src/xenapi/xenapi_utils.c (createVMRecordFromXml): Likewise.
* src/security/security_selinux.c (SELinuxGenNewContext):
Likewise.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia):
Likewise.
* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Likewise.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetPtyPaths):
Likewise.
* src/qemu/qemu_driver.c (qemudDomainShutdown)
(qemudDomainBlockStats, qemudDomainMemoryPeek): Likewise.
* src/storage/storage_backend_iscsi.c
(virStorageBackendCreateIfaceIQN): Likewise.
* src/node_device/node_device_udev.c (udevProcessPCI): Likewise.
If strdup("x509dname") or strdup("saslUsername") success, but
strdup(x509dname) or strdup(saslUsername) failed, subject->nidentity
is not the num elements of subject->identities, and we will leak some
memory.
When you happen to have a libvirtd binary compiled with the
libxenlight driver (say you have installed xen-4.1 libraries)
but not running a xen enabled system, then libvirtd fails to start.
The cause is that libxlStartup() returns -1 when failing to initialize
the library, and this propagates to virStateInitialize() which consider
this a failure. We should only exit libxlStartup with an error code
if something like an allocation error occurs, not if the driver failed
to initialize.
* src/libxl/libxl_driver.c: fix libxlStartup() to not return -1
when failing to initialize the libxenlight library
Commit 78ba748ef1 claims to fix
documentation for swap_hard_limit virsh memtune option but it only fixes
documentation in formatdomain.html and libvirt.h. This patch completes
the task by fixing "virsh help memtune" output and memtune section of
virsh man page.
qemu driver uses a 4K buffer for reading qemu log file. This is enough
when only qemu's output is present in the log file. However, when
debugging messages are turned on, intermediate libvirt process fills the
log with a bunch of debugging messages before it executes qemu binary.
In such a case the buffer may become too small. However, we are not
really interested in libvirt messages so they can be filtered out from
the buffer.
It throws errors as long as the cgroup controller is not available,
regardless of whether we really want to use it to do setup or not,
which is not what we want, fixing it with throwing error when need
to use the controller.
And change "VIR_WARN" to "qemuReportError" for memory controller
incidentally.
We create a temporary file to save memory, and we will remove it after reading
memory to buffer. But we free the variable that contains the temporary filename
before we remove it. So we should free tmp after unlinking it.
The iohelper binary is not required on Win32, although it compiles
without trouble. Simply remove it from the RPM.
* mingw32-libvirt.spec.in: Remove iohelper
printf on Win32 does not necessarily support %lld and we don't
have GNULIBs wrapper for printf(). Switch to use asprintf() for
which we do have a gnulib wrapper with %lld support
* examples/domain-events/events-c/event-test.c: Fix formatting
of %lld on Win32
* cfg.mk: Don't require use of virAsprintf since this is an
example app for out of tree users to follow
strcase{cmp/str} have the drawback of being sensitive to the global
locale; this is unacceptable in a library setting. Prefer a
hard-coded C locale alternative for all but virsh, which is user
facing and where the global locale isn't changing externally.
* .gnulib: Update to latest, for c-strcasestr change.
* bootstrap.conf (gnulib_modules): Drop strcasestr, add c-strcase
and c-strcasestr.
* cfg.mk (sc_avoid_strcase): New rule.
(exclude_file_name_regexp--sc_avoid_strcase): New exception.
* src/internal.h (STRCASEEQ, STRCASENEQ, STRCASEEQLEN)
(STRCASENEQLEN): Adjust offenders.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextEjectMedia):
Likewise.
* tools/virsh.c (namesorter): Document exception.
If qemu quited unexpectedly when we call qemuMonitorJSONHMP(),
libvirt will crash.
Steps to reproduce this bug:
1. use gdb to attach libvirtd, and set a breakpoint in the function
qemuMonitorSetCapabilities()
2. start a vm
3. let the libvirtd to run until qemuMonitorJSONSetCapabilities() returns.
4. kill the qemu process
5. continue running libvirtd
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
If the monitor met a error, and we will call qemuProcessHandleMonitorEOF().
But we may try to send monitor command after qemuProcessHandleMonitorEOF()
returned. Then libvirtd will be blocked in qemuMonitorSend().
Steps to reproduce this bug:
1. use gdb to attach libvirtd, and set a breakpoint in the function
qemuConnectMonitor()
2. start a vm
3. let the libvirtd to run until qemuMonitorOpen() returns.
4. kill the qemu process
5. continue running libvirtd
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Currently libvirt's default logging is limited and it is difficult to
determine what was happening when a proglem occurred (especially on a
machines where one don't know the detail.) This patch helps to do that
by making additional logging available for the following events:
creating/defining/undefining domains
creating/defining/undefining/starting/stopping networks
creating/defining/undefining/starting/stopping storage pools
creating/defining/undefining/starting/stopping storage volumes.
* AUTHORS: add Naoya Horiguchi
* src/network/bridge_driver.c src/qemu/qemu_driver.c
src/storage/storage_driver.c: provide more VIR_INFO logging
Not sure if it's the correct way to add cputune xml for xend driver,
and besides, seems "xm driver" and "xen hypervisor" also support
vcpu affinity, do we need to add support for them too?
When domain startup, setting cpu affinity and cpu shares according
to the cputune xml specified in domain xml.
Modify "qemudDomainPinVcpu" to update domain config for vcpupin,
and modify "qemuSetSchedulerParameters" to update domain config
for cpu shares.
v1 - v2:
* Use "VIR_ALLOC_N" instead of "VIR_ALLOC_VAR"
* But keep raising error when it fails on adding vcpupin xml
entry, as I still don't have a better idea yet.
Implementations of following functions:
virDomainVcpupinIsDuplicate
virDomainVcpupinFindByVcpu
virDomainVcpupinAdd
Update "virDomainDefParseXML" to parse, and "virDomainDefFormatXML"
to build cputune xml, also implementations of new internal helper
functions.
v1 - v2:
* Resolve potential crash bug of "virDomainVcpupinAdd"
Also related new functions' declaration, and expose the new introduced
functions in libvirt_private.syms.
v1 - v2:
Don't expose "virAllocVar" in libvirt_private.syms
My earlier testing for commit 34fa0de0 was done while starting
just-built libvirt from an unconfined_t shell, where the fds happened
to work when transferring to qemu. But when installed and run under
virtd_t, failure to label the raw file (with no compression) or the
pipe (with compression) triggers SELinux failures when passing fds
over SCM_RIGHTS to svirt_t qemu.
* src/qemu/qemu_migration.c (qemuMigrationToFile): When passing
FDs, make sure they are labeled.
First fallout of fd: migration - it looks like SELinux enforcing
_does_ require fd labeling (running uninstalled libvirtd from an
unconstrained shell had no problems, but once faked out by doing
chcon `stat -c %C /usr/sbin/libvirtd` daemon/libvirtd
run_init $PWD/daemon/libvirtd
to run it with the same context as an init script service, and with
SELinux enforcing, I got a rather confusing failure:
error: Failed to save domain fedora_12 to fed12.img
error: internal error unable to send TAP file handle: No file descriptor supplied via SCM_RIGHTS
This fixes the error message, then I need to figure out a subsequent
patch that does the fsetfilecon() necessary to keep things happy.
It also appears that libvirtd hangs on a failed fd transfer; I don't
know if that needs an independent fix.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextSendFileHandle):
Improve message, since TAP is no longer only client.
* src/Makefile.am src/libvirt_private.syms configure.ac: share and
reuse the sexpr routines from sexpr.h of the old xen driver
* src/libxl/libxl_driver.c: implements libxlDomainXMLFromNative and
libxlDomainXMLToNative
Hook the virtual cpu functions to their libxenlight counterparts
* src/libxl/libxl_driver.c: implements libxlDomainSetVcpus,
libxlDomainGetVcpus, libxlDomainSetVcpusFlags,
libxlDomainGetVcpusFlags and libxlDomainPinVcpu
* src/libxl/libxl_conf.h: add the necessary fields to the driver
private structure
* src/libxl/libxl_driver.c: add lifecycle event support and entry
points for event(de)register(any)
The daemon loops over the linked list of streams when a client
quits, closing any that the client hadn't already closed. Except
it didn't ever move to the next element in the list!
* daemon/stream.c: Fix loop over linked list of streams
The new commands vol-upload and vol-download, allow a local file
to be transferred to/from a storage volume.
* tools/virsh.c: Add vol-upload and vol-download commands
* tools/virsh.pod: Document new commands
New APIs are added allowing streaming of content to/from
storage volumes.
* include/libvirt/libvirt.h.in: Add virStorageVolUpload and
virStorageVolDownload APIs
* src/driver.h, src/libvirt.c, src/libvirt_public.syms: Stub
code for new APIs
* src/storage/storage_driver.c, src/esx/esx_storage_driver.c:
Add dummy entries in driver table for new APIs
The O_NONBLOCK flag doesn't work as desired on plain files
or block devices. Introduce an I/O helper program that does
the blocking I/O operations, communicating over a pipe that
can support O_NONBLOCK
* src/fdstream.c, src/fdstream.h: Add non-blocking I/O
on plain files/block devices
* src/Makefile.am, src/util/iohelper.c: I/O helper program
* src/qemu/qemu_driver.c, src/lxc/lxc_driver.c,
src/uml/uml_driver.c, src/xen/xen_driver.c: Update for
streams API change
The example C event loop code is a nasty hack and not compliant
with the require API semantics. Delete this, so that developers
don't mistakenly copy it. Instead call the new public event loop
APIs.
Update the python event loop example, so that it can optionally
use the public event APIs, as an alternative to the pure python
code. The pure python event code is a good working example, so
don't delete it.
Also make the python example use a read only connection to avoid
authentication prompts
* examples/domain-events/events-c/event-test.c: Replace event
loop code with use of public APIs
* examples/domain-events/events-python/event-test.py: Allow
optional use of new public event APIs
Spawn the compressor ourselves, instead of requiring the shell.
* src/qemu/qemu_migration.c (qemuMigrationToFile): Spawn
compression helper process when needed.
SELinux labeling and cgroup ACLs aren't required if we hand a
pre-opened fd to qemu. All the more reason to love fd: migration.
* src/qemu/qemu_migration.c (qemuMigrationToFile): Skip steps
that are irrelevant in fd migration.
This points out that core dumps (still) don't work for root-squash
NFS, since the fd is not opened correctly. This patch should not
introduce any functionality change, it is just a refactoring to
avoid duplicated code.
* src/qemu/qemu_migration.h (qemuMigrationToFile): New prototype.
* src/qemu/qemu_migration.c (qemuMigrationToFile): New function.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag, doCoreDump): Use
it.
Direct access to an open file is so much simpler than passing
everything through a pipe!
* src/qemu/qemu_driver.c (qemudOpenAsUID)
(qemudDomainSaveImageClose): Delete.
(qemudDomainSaveImageOpen): Rename...
(qemuDomainSaveImageOpen): ...and drop read_pid argument. Use
virFileOpenAs instead of qemudOpenAsUID.
(qemudDomainSaveImageStartVM, qemudDomainRestore)
(qemudDomainObjRestore): Rename...
(qemuDomainSaveImageStartVM, qemuDomainRestore)
(qemDomainObjRestore): ...and simplify accordingly.
(qemudDomainObjStart, qemuDriver): Update callers.
This patch intentionally doesn't change indentation, in order to
make it easier to review the real changes.
* src/util/util.h (VIR_FILE_OP_RETURN_FD, virFileOperationHook):
Delete.
(virFileOperation): Rename...
(virFileOpenAs): ...and reduce parameters.
* src/util/util.c (virFileOperationNoFork, virFileOperation):
Rename and simplify.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Adjust caller.
* src/storage/storage_backend.c (virStorageBackendCreateRaw):
Likewise.
* src/libvirt_private.syms: Reflect rename.
Currently, the hook function in virFileOperation is extremely limited:
it must be async-signal-safe, and cannot modify any memory in the
parent process. It is much handier to return a valid fd and operate
on it in the parent than to deal with hook restrictions.
* src/util/util.h (VIR_FILE_OP_RETURN_FD): New flag.
* src/util/util.c (virFileOperationNoFork, virFileOperation):
Honor new flag.
This allows direct saves (no compression, no root-squash NFS) to use
the more efficient fd: migration, which in turn avoids a race where
qemu exec: migration can sometimes fail because qemu does a generic
waitpid() that conflicts with the pclose() used by exec:. Further
patches will solve compression and root-squash NFS.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Use new function
when there is no compression.
Latent bug introduced in commit 2d6a581960 (Aug 2009), but not exposed
until commit 1859939a (Jan 2011). Basically, when virExec creates a
pipe, it always marks libvirt's side as cloexec. If libvirt then
wants to hand that pipe to another child process, things work great if
the fd is dup2()'d onto stdin or stdout (as with stdin: or exec:
migration), but if the pipe is instead used as-is (such as with fd:
migration) then qemu sees EBADF because the fd was closed at exec().
This is a minimal fix for the problem at hand; it is slightly racy,
but no more racy than the rest of libvirt fd handling, including the
case of uncompressed save images. A more invasive fix, but ultimately
safer at avoiding leaking unintended fds, would be to _always and
atomically_ open all fds as cloexec in libvirt (thanks to primitives
like open(O_CLOEXEC), pipe2(), accept4(), ...), then teach virExec to
clear that bit for all fds explicitly marked to be handed to the child
only after forking.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Clear cloexec
flag.
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Tweak test.
* src/util/logging.c (virLogStartup, virLogSetBufferSize):
Over-allocate, so that a debugger can just print the circular
buffer. Suggested by Daniel Veillard.
* src/Makefile.am (remote_protocol-structs): Flatten tabs.
* src/remote_protocol-structs: Likewise. Also add a hint to emacs
to make it easier to keep spaces in the file.
Diego reported a bug where virsh tries to initialize a readline
history directory during 'make check' run as root, but fails
because /root was read-only.
It turns out that I could reproduce this as non-root, by using:
mv ~/.virsh{,.bak}
chmod a-w ~
make check -C tests TESTS=int-overflow
chmod u+w ~
mv ~/.virsh{.bak,}
* tests/int-overflow: Don't trigger interactive mode.
Reported by Diego Elio Pettenò.
Otherwise, if something like doStopVcpus fails after the first
restore, a second restore is attempted and throws a useless
warning.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Avoid second
restore of state label.
The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.
Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.
The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.
Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.
* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
src/opennebula/one_conf.c, src/opennebula/one_conf.h,
src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
to OpenNebula
* docs/drvone.html.in: Delete file
Some things to note in this patch:
- we do extend libvirt scope beyond purely managing domains, there is
already a number of blocks which are here as helpr functions to
manage the resources on the host.
- we are expanding in the direction of libvirt being sufficient to do
most of the management on the Host (but within the limits of the need
for virtualization, e.g. managing users on the host is out of scope)
- we don't require anymore APIs to be supported by multiple
hypervisors to get in, it's already the case in practice, but we
should still make sure the semantic of those APIs are clear. We
added quite a bit for QEmu, but for example I saw on IRC that VBox
could emulate a network unplug/replug on a domain interface, and
that would be a good addition even if a priori no other hypervisor
supports it.
- Make clear that all libvirt APIs are available remotely, which is
key to use libvirt for building management tools.
- link the goal page from the project main page
As for libvirt project directions, I think it just reflects the natural
evolution in the last couple of years. We are less hypervisor agnostic
and extending in the Host management. Clearly there is interest in
making sure libvirt is complete in term of features for the hypervisors
supported, especially the ones like KVM or LXC which don't really have
integrated management library.
* docs/goals.html.in: update the goals page
* docs/index.html.in: link it from the top page
Add missing open curly brace between function declaration of non-linux
variant of qemudDomainInterfaceStats() and its body.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Commit f44bfb7 was supposed to make sure no additional libvirt API (esp.
*Free) is called before remoteDispatchConnError() is called on error.
However, the patch missed two instances.
Sometimes, an asynchronous helper is started (such as a compressor
or iohelper program), but a later error means that we want to
abort that child. Make this easier.
Note that since daemons and virCommandRunAsync can't mix, the only
time virCommandFree can reap a process is if someone did
virCommandRunAsync for a non-daemon and didn't stash the pid.
* src/util/command.h (virCommandAbort): New prototype.
* src/util/command.c (_virCommand): Add new field.
(virCommandRunAsync, virCommandWait): Track whether pid was used.
(virCommandFree): Reap child if caller did not request pid.
(virCommandAbort): New function.
* src/libvirt_private.syms (command.h): Export it.
* tests/commandtest.c (test19): New test.
It doesn't make sense to run a daemon without synchronously
waiting for the child process to reply whether the daemon has
been kicked off and pidfile written yet.
* src/util/command.c (VIR_EXEC_RUN_SYNC): New constant.
(virCommandRun): Set temporary flag.
(virCommandRunAsync): Use it to prevent async runs of intermediate
child when spawning asynchronous daemon grandchild.
Child processes don't always reach _exit(); if they die from a
signal, then any messages should still be accurate. Most users
either expect a 0 status (thankfully, if status==0, then
WIFEXITED(status) is true and WEXITSTATUS(status)==0 for all
known platforms) or were filtering on WIFEXITED before printing
a status, but a few were missing this check. Additionally,
nwfilter_ebiptables_driver was making an assumption that works
on Linux (where WEXITSTATUS shifts and WTERMSIG just masks)
but fails on other platforms (where WEXITSTATUS just masks and
WTERMSIG shifts).
* src/util/command.h (virCommandTranslateStatus): New helper.
* src/libvirt_private.syms (command.h): Export it.
* src/util/command.c (virCommandTranslateStatus): New function.
(virCommandWait): Use it to also diagnose status from signals.
* src/security/security_apparmor.c (load_profile): Likewise.
* src/storage/storage_backend.c
(virStorageBackendQEMUImgBackingFormat): Likewise.
* src/util/util.c (virExecDaemonize, virRunWithHook)
(virFileOperation, virDirCreate): Likewise.
* daemon/remote.c (remoteDispatchAuthPolkit): Likewise.
* src/nwfilter/nwfilter_ebiptables_driver.c (ebiptablesExecCLI):
Likewise.
Hotpluging host usb device by text mode will fail, because the monitor
command 'device_add' outputs 'husb: using...' if it succeeds, but we
think the command should not output anything.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Add the compiler attribute to ensure we don't introduce any more
ref bugs like were just patched in commit 9741f34, then explicitly
mark the remaining places in code that are safe.
* src/qemu/qemu_monitor.h (qemuMonitorUnref): Mark
ATTRIBUTE_RETURN_CHECK.
* src/conf/domain_conf.h (virDomainObjUnref): Likewise.
* src/conf/domain_conf.c (virDomainObjParseXML)
(virDomainLoadStatus): Fix offenders.
* src/openvz/openvz_conf.c (openvzLoadDomains): Likewise.
* src/vmware/vmware_conf.c (vmwareLoadDomains): Likewise.
* src/qemu/qemu_domain.c (qemuDomainObjBeginJob)
(qemuDomainObjBeginJobWithDriver)
(qemuDomainObjExitRemoteWithDriver): Likewise.
* src/qemu/qemu_monitor.c (QEMU_MONITOR_CALLBACK): Likewise.
Suggested by Daniel P. Berrange.
This simplifies several callers that were repeating checks already
guaranteed by util.c, and makes other callers more robust to now
reject directories. remote_driver.c was over-strict - access(,R_OK)
is only needed to execute a script file; a binary only needs
access(,X_OK) (besides, it's unusual to see a file with x but not
r permissions, whether script or binary).
* cfg.mk (sc_prohibit_access_xok): New syntax-check rule.
(exclude_file_name_regexp--sc_prohibit_access_xok): Exempt one use.
* src/network/bridge_driver.c (networkStartRadvd): Fix offenders.
* src/qemu/qemu_capabilities.c (qemuCapsProbeMachineTypes)
(qemuCapsInitGuest, qemuCapsInit, qemuCapsExtractVersionInfo):
Likewise.
* src/remote/remote_driver.c (remoteFindDaemonPath): Likewise.
* src/uml/uml_driver.c (umlStartVMDaemon): Likewise.
* src/util/hooks.c (virHookCheck): Likewise.
Bug https://bugzilla.redhat.com/show_bug.cgi?id=689374 reported libvirtd
crash during error dispatch.
The reason is that libvirtd uses remoteDispatchConnError() with non-NULL
conn parameter which means that virConnGetLastError() is used instead of
its thread safe replacement virGetLastError().
So when several libvirtd threads are reporting errors at the same time,
the errors can get mixed or corrupted or in case of bad luck libvirtd
itself crashes.
Since Daniel B. is going to rewrite this code from scratch on top of his
RPC infrastructure, I tried to come up with a minimal fix. Thus,
remoteDispatchConnError() now just ignores its conn argument and always
calls virGetLastError(). However, several callers had to be touched as
well, since no libvirt API is allowed to be called before dispatching
the error. Doing so would reset the error and we would have nothing to
dispatch. As a result of that, the code is not very nice but that
doesn't really make daemon/remote.c worse than it is now :-) And it will
all die soon, which is good.
The bug report also contains a reproducer in C which detects both mixed
up error messages and libvirtd crash. Before this patch, I was able to
crash libvirtd in about 20 seconds up to 3 minutes depending on number
of CPU cores (more is better) and luck.
Steps to reproduce this bug:
1. virsh attach-disk domain --source diskimage --target sdb --sourcetype file --driver qemu --subdriver qcow2
error: Failed to attach disk
error: operation failed: adding scsi-disk,bus=scsi0.0,scsi-id=1,drive=drive-scsi0-0-1,id=scsi0-0-1 device failed: Property 'scsi-disk.drive' can't find value 'drive-scsi0-0-1'
2. service libvirtd restart
Stopping libvirtd daemon: [ OK ]
Starting libvirtd daemon: [ OK ]
3. virsh attach-disk domain --source diskimage --target sdb --sourcetype file --driver qemu --subdriver raw
error: Failed to attach disk
error: operation failed: adding lsi,id=scsi0,bus=pci.0,addr=0x6 device failed: Duplicate ID 'scsi0' for device
The reason is that we create a new scsi controller but we do not update
/var/run/libvirt/qemu/domain.xml.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Not every day you see a patch that nukes 27 files!
* .gnulib: Update to latest, for maint.mk improvements
* bootstrap: Resync to gnulib.
* bootstrap.conf (ACLOCAL): Swap the secondary aclocal include
directory, now that bootstrap picks up gnulib/m4 instead of m4.
* Makefile.am (syntax_check_exceptions, EXTRA_DIST): No longer
worry about nuked files.
* cfg.mk (sc_x_sc_dist_check): Delete dead rule.
(VC_LIST_ALWAYS_EXCLUDE_REGEX): Add HACKING.
(exclude_file_name_regexp--sc_*): Inline and simplify contents...
* .x-sc_*: ...from here, then delete the files.
The ref count was assigned to 1 at creation, then never modified again
until it was decremented just before freeing the object.
* src/conf/domain_conf.h (_virDomainSnapshotObj): Delete unused
field.
(virDomainSnapshotObjUnref): Delete unused prototype.
* src/libvirt_private.syms: Likewise.
* src/conf/domain_conf.c (virDomainSnapshotObjNew)
(virDomainSnapshotObjListDataFree): Update users.
(virDomainSnapshotObjUnref): Delete.
Among others, the missing radvd dependency showed up as:
error: Failed to start network ipv6net
error: Cannot find radvd - Possibly the package isn't installed: No such file
or directory
even when radvd was installed, because the RADVD preprocessor
symbol was missing at configure time.
* libvirt.spec.in (with_network): Add BuildRequires for radvd,
iptables, and ip6tables.
(BuildRequires): Add libxslt and augeas for docs and test.
(with_libvirtd): Add module-init-tools for modprobe.
(with_nwfilter): Add BuildRequires for ebtables.
(with_esx): Fix esx build on RHEL 5, thanks to curl-devel rename.
Problem:
"parser.head" is not NULL even if it's free'ed by "virJSONValueFree",
returning "parser.head" when "virJSONValueFromString" fails will cause
unexpected errors (libvirtd will crash sometimes), e.g.
In function "qemuMonitorJSONArbitraryCommand":
if (!(cmd = virJSONValueFromString(cmd_str)))
goto cleanup;
if (qemuMonitorJSONCommand(mon, cmd, &reply) < 0)
goto cleanup;
......
cleanup:
virJSONValueFree(cmd);
It will continues to send command to monitor even if "virJSONValueFromString"
is failed, and more worse, it trys to free "cmd" again.
Crash example:
{"error":{"class":"QMPBadInputObject","desc":"Expected 'execute' in QMP input","data":{"expected":"execute"}}}
{"error":{"class":"QMPBadInputObject","desc":"Expected 'execute' in QMP input","data":{"expected":"execute"}}}
error: server closed connection:
error: unable to connect to '/var/run/libvirt/libvirt-sock', libvirtd may need to be started: Connection refused
error: failed to connect to the hypervisor
This fix is to:
1) return NULL for failure of "virJSONValueFromString",
2) and it seems "virJSONValueFree" uses incorrect loop index for type
of "VIR_JSON_TYPE_OBJECT", fix it together.
* src/util/json.c
Steps to reproduce this bug:
# cat usb.xml
<hostdev mode='subsystem' type='usb'>
<source>
<address bus='0x001' device='0x003'/>
</source>
</hostdev>
# virsh attach-device vm1 usb.xml
error: Failed to attach device from usb.xml
error: server closed connection:
The reason of this bug is that we set data.cgroup to NULL, and this will cause
libvirtd crashed.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
A future patch will change reference counting idioms; consolidating
this pattern now makes the next patch smaller (touch only the new
macro rather than every caller).
* src/qemu/qemu_monitor.c (QEMU_MONITOR_CALLBACK): New helper.
(qemuMonitorGetDiskSecret, qemuMonitorEmitShutdown)
(qemuMonitorEmitReset, qemuMonitorEmitPowerdown)
(qemuMonitorEmitStop, qemuMonitorEmitRTCChange)
(qemuMonitorEmitWatchdog, qemuMonitorEmitIOError)
(qemuMonitorEmitGraphics): Use it to reduce duplication.
This patch introduces PREASSOCIATE-RR during incoming VM migration on the
destination host. This is similar to the usage of PREASSOCIATE during
migration in 8021qbg libvirt code today. PREASSOCIATE-RR is a VDP operation.
With the latest at IEEE, 8021qbh will need to support VDP operations.
A corresponding enic driver patch to support PREASSOCIATE-RR for 8021qbh
will be posted for net-next-2.6 inclusion soon.
THe veth setup in LXC had a couple of flaws, first brInit did
not report any error when it failed. Second vethCreate() did
not correctly initialize the variable containing the return
code, so could report failure even when it succeeded.
* src/lxc/lxc_driver.c: Report error when brInit fails
* src/lxc/veth.c: Fix uninitialized variable
Enhance the QEMU migration monitoring loop, so that it can get
a signal to change migration speed on the fly
* src/qemu/qemu_domain.h: Add signal for changing speed on the fly
* src/qemu/qemu_driver.c: Wire up virDomainMigrateSetSpeed driver
* src/qemu/qemu_migration.c: Support signal for changing speed
It is possible to set a migration speed limit when starting
migration. This new API allows the speed limit to be changed
on the fly to adjust to changing conditions
* src/driver.h, src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in: Add virDomainMigrateSetMaxSpeed
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/vmware/vmware_driver.c, src/xen/xen_driver.c,
src/libxl/libxl_driver.c: Stub new API
Fix for bug https://bugzilla.redhat.com/show_bug.cgi?id=618970
The "prepare" hook is called very early in the VM statup process
before device labeling, so that it can allocate ressources not
managed by libvirt, such as DRBD, or for instance create missing
bridges and vlan interfaces.
* src/util/hooks.c src/util/hooks.h: add definitions for new hooks
VIR_HOOK_QEMU_OP_PREPARE and VIR_HOOK_QEMU_OP_RELEASE
* src/qemu/qemu_process.c: use them in qemuProcessStart and
qemuProcessStop()
Wen Congyang gained commiter access
Created a new section of previous commiters to the project
but not involved much anymore: Karel Zak, Atsushi SAKAI,
Dave Leskovec and Dan Smith
With only a single caller to these two monitor commands, I
didn't need to wrap a new WithFds version, but just change
the command itself.
* src/qemu/qemu_monitor.h (qemuMonitorAddNetdev)
(qemuMonitorAddHostNetwork): Add parameters.
* src/qemu/qemu_monitor.c (qemuMonitorAddNetdev)
(qemuMonitorAddHostNetwork): Add support for fd passing.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Use it to
simplify code.
This is also a bug fix - on the error path, qemu_hotplug would
leave the configfd file leaked into qemu. At least the next
attempt to hotplug a PCI device would reuse the same fdname,
and when the qemu getfd monitor command gets a new fd by the
same name as an earlier one, it closes the earlier one, so there
is no risk of qemu running out of fds.
* src/qemu/qemu_monitor.h (qemuMonitorAddDeviceWithFd): New
prototype.
* src/qemu/qemu_monitor.c (qemuMonitorAddDevice): Move guts...
(qemuMonitorAddDeviceWithFd): ...to new function, and add support
for fd passing.
* src/qemu/qemu_hotplug.c (qemuDomainAttachHostPciDevice): Use it
to simplify code.
Suggested by Daniel P. Berrange.
qemu_monitor was already returning -1 and setting errno to EINVAL
on any attempt to send an fd without a unix socket, but this was
a silent failure in the case of qemuDomainAttachHostPciDevice.
Meanwhile, qemuDomainAttachNetDevice was doing some sanity checking
for a better error message; it's better to consolidate that to a
central point in the API.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Move sanity
checking...
* src/qemu/qemu_monitor.c (qemuMonitorSendFileHandle): ...into
central location.
Suggested by Chris Wright.
https://bugzilla.redhat.com/show_bug.cgi?id=684655 points out
a regression introduced in commit 2215050edd - non-root users
can't connect to qemu:///session because libvirtd dies when
it can't use pciaccess initialization.
* src/node_device/node_device_udev.c (udevDeviceMonitorStartup):
Don't abort udev driver (and libvirtd overall) if non-root user
can't use pciaccess.
Valgrind caught that our log wrap-around was going 1 past the end.
Regression introduced in commit b16f47a; previously the
buffer was static and size+1 bytes, but now it is dynamic and
exactly size bytes.
* src/util/logging.c (virLogStr): Don't write past end of log.
We have reported error in the function prepareCall(), and
the error is not only OOM error. So we should not report
OOM error in the function call() when prepareCall() failed.
If virFileIsExecutable is to replace access(file,X_OK), then
errno must be usable on failure.
* src/util/util.c (virFileIsExecutable): Set errno on failure.
<imagelable> is not generated by running domain, actually we parse
it in src/conf/domain_conf.c, this patch is to fix it, otherwise any
validation (virt-xml-validate) on the domain xml dumped from shutoff
domain containing <imagelable> will fail.
* docs/schemas/domain.rng
The current description suggests that you always have to provide
a valid typeVer pointer. But if you want only the libvirt version
it's also possible to set type and typeVer to NULL to skip the
hypervisor part.
This patch enables cgroup controllers as much as possible by skipping
the creation of blkio controller when running with old kernels that
doesn't support multi-level directory for blkio controller.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The libxenlight driver does not build against the tech preview
version of libxenlight in Xen 4.0. Only enable building the
driver against more complete libxenlight found in Xen 4.1.
THREADS.txt states that the contents of vm should not be read or
modified while the vm lock is not held, but that the lock must not
be held while performing a monitor command. This fixes all the
offenders that I could find.
* src/qemu/qemu_process.c (qemuProcessStartCPUs)
(qemuProcessInitPasswords, qemuProcessStart): Don't modify or
refer to vm state outside lock.
* src/qemu/qemu_driver.c (qemudDomainHotplugVcpus): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeGraphicsPasswords):
Likewise.
This is detailed in:
https://bugzilla.redhat.com/show_bug.cgi?id=688957
Since radvd is executed by daemonizing it, the attempt to exec the
radvd binary doesn't happen until after libvirtd has already received
an exit code from the intermediate forked process, so no error is
detected or logged by __virExec().
We can't require radvd as a prerequisite for the libvirt package (many
installations don't use IPv6, so they don't need it), so instead we
add in a check to verify there is an executable radvd binary prior to
trying to exec it.
When SASL is active, it was possible that we read and decoded
more data off the wire than we initially wanted. The loop
processing this data terminated after only one message to
avoid delaying the calling thread, but this could delay
event delivery. As long as there is decoded SASL data in
memory, we must process it, before returning to the poll()
event loop.
This is a counterpart to the same kind of issue solved in
commit 68d2c3482f
in a different area of the code
* src/remote/remote_driver.c: Process all pending SASL data
virExec would only resolved the binary to $PATH if no env
variables were being set. Since there is no execvep() API
in POSIX, we use virFindFileInPath to manually resolve
the binary and then use execv() instead of execvp().
Add a new xen driver based on libxenlight [1], which is the primary
toolstack starting with Xen 4.1.0. The driver is stateful and runs
privileged only.
Like the existing xen-unified driver, the libxenlight driver is
accessed with xen:// URI. Driver selection is based on the status
of xend. If xend is running, the libxenlight driver will not load
and xen:// connections are handled by xen-unified. If xend is not
running *and* the libxenlight driver is available, xen://
connections are deferred to the libxenlight driver.
V6:
- Address several code style issues noted by Daniel Veillard
- Make drive work with xen:/// URI
- Hold domain object reference while domain is injected in
libvirt event loop. Race found and fixed by Markus Groß.
V5:
- Ensure events are unregistered when domain private data
is destroyed. Discovered and fixed by Markus Groß.
V4:
- Handle restart of libvirtd, reconnecting to previously
started domains
- Rebased to current master
- Tested against Xen 4.1 RC7-pre (c/s 22961:c5d121fd35c0)
V3:
- Reserve vnc port within driver when autoport=yes
V2:
- Update to Xen 4.1 RC6-pre (c/s 22940:5a4710640f81)
- Rebased to current master
- Plug memory leaks found by Stefano Stabellini and valgrind
- Handle SHUTDOWN_crash domain death event
[1] http://lists.xensource.com/archives/html/xen-devel/2009-11/msg00436.html
Calling most hash APIs is not safe from inside of an iterator callback.
Exceptions are APIs that do not modify the hash table and removing
current hash entry from virHashFroEach callback.
This patch make all APIs which are not safe fail instead of just relying
on the callback being nice not calling any unsafe APIs.
Steps to reproduce this bug:
# cat test.sh
#! /bin/bash -x
virsh start domain
sleep 5
virsh qemu-monitor-command domain 'cpu_set 2 online' --hmp
# while true; do ./test.sh ; done
Then libvirtd will crash.
The reason is that:
we add a reference of obj when we open the monitor. We will reduce this
reference when we free the monitor.
If the reference of monitor is 0, we will free monitor automatically and
the reference of obj is reduced.
But in the function qemuDomainObjExitMonitorWithDriver(), we reduce this
reference again when the reference of monitor is 0.
It will cause the obj be freed in the function qemuDomainObjEndJob().
Then we start the domain again, and libvirtd will crash in the function
virDomainObjListSearchName(), because we pass a null pointer(obj->def->name)
to strcmp().
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
This bug was reported by Shi Jin(jinzishuai@gmail.com):
=============
# virsh attach-disk RHEL6RC /var/lib/libvirt/images/test3.img vdb \
--driver file --subdriver qcow2
Disk attached successfully
# virsh save RHEL6RC /var/lib/libvirt/images/memory.save
Domain RHEL6RC saved to /var/lib/libvirt/images/memory.save
# virsh restore /var/lib/libvirt/images/memory.save
error: Failed to restore domain from /var/lib/libvirt/images/memory.save
error: internal error unsupported driver name 'file'
for disk '/var/lib/libvirt/images/test3.img'
=============
We check the driver name when we start or restore VM, but we do
not check it while attaching a disk. This adds the same check on disk
driverName used in qemuBuildCommandLine to qemudDomainAttachDevice.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
* docs/logging.html.in: document the fact that starting from
0.9.0 the server logs goes to libvirtd.log instead of syslog
by default, describe the debug buffer, restructure the page
and add a couple more examples
As pointed out, locking the buffer from the signal handler
cannot been guaranteed to be safe, so to avoid any hazard
we prefer the trade off of dumping logs possibly messed up
by concurrent logging activity rather than risk a daemon
crash.
* src/util/logging.c: change virLogEmergencyDumpAll() to not
take any lock on the log buffer but reset buffer content variables
to an empty set before starting the actual dump.
Steps to reproduce this bug:
# virsh qemu-monitor-command domain 'cpu_set 2 online' --hmp
The domain has 2 cpus, and we try to set the third cpu online.
The qemu crashes, and this command will hang.
The reason is that the refs is not 1 when we unwatch the monitor.
We lock the monitor, but we do not unlock it. So virCondWait()
will be blocked.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
* Correct the documentation for cgroup: the swap_hard_limit indicates
mem+swap_hard_limit.
* Change cgroup private apis to: virCgroupGet/SetMemSwapHardLimit
Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
I'm proposing we make use of $PCIDIR/reset in qemu-kvm to reset
devices on VM reset. We need to add it to libvirt's list of
files that get ownership for device assignment.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
xen-unstable c/s 21118:28e5409e3fb3 bumped sysctl version to 8.
xen-unstable c/s 21212:de94884a669c introduced CPU pools feature,
adding another member to xen_domctl_getdomaininfo struct. Add a
corresponding domctl v7 struct in xen hypervisor sub-driver and
detect sysctl v8 during initialization.
The virCond of the remote_thread_call struct was leaked in some
places. This results in leaking the underlying mutex. Which in turn
leaks a handle on Windows.
Reported by Aliaksandr Chabatar and Ihar Smertsin.
When building for an older distro, it's convenient to just
tell rpmbuild to define dist (for example, to .el6_0), rather
than also remembering to define rhel to 6.
* libvirt.spec.in: Guess %{rhel} based on %{dist}.
Based on an idea by Jiri Denemark.
A bug in libnl (see https://bugzilla.redhat.com/show_bug.cgi?id=677724
and https://bugzilla.redhat.com/show_bug.cgi?id=677725) makes it very
easy to create a failure to connect to the netlink socket when trying
to open a macvtap network device ("type='direct'" in domain interface
XML). When that error occurred (during a call to libnl's nl_connect()
from libvirt's nlComm(), there was no log message, leading virsh (for
example) to report "unknown error".
There were two other cases in nlComm where an error in a libnl
function might return with failure but no error reported. In all three
cases, this patch logs a message which will hopefully be more useful.
Note that more detailed information about the failure might be
available from libnl's nl_geterror() function, but it calls
strerror(), which is not threadsafe, so we can't use it.
If pool xml has no definition for "port", then "Segmentation fault"
happens when jumping to "cleanup:" to do "VIR_FREE(port)", as "port"
was not initialized in this situation.
* src/conf/storage_conf.c
POSIX states about dd:
If the bs=expr operand is specified and no conversions other than
sync, noerror, or notrunc are requested, the data returned from each
input block shall be written as a separate output block; if the read
returns less than a full block and the sync conversion is not
specified, the resulting output block shall be the same size as the
input block. If the bs=expr operand is not specified, or a conversion
other than sync, noerror, or notrunc is requested, the input shall be
processed and collected into full-sized output blocks until the end of
the input is reached.
Since we aren't using conv=sync, there is no zero-padding, but our
use of bs= means that a short read results in a short write. If
instead we use ibs= and obs=, then short reads are collected and dd
only has to do a single write, which can make dd more efficient.
* src/qemu/qemu_monitor.c (qemuMonitorMigrateToFile):
Avoid 'dd bs=', since it can cause short writes.
"virsh connect ''" should try to connect to the default connection,
but the previous patch made it issue a warning about an invalid URI.
* tools/virsh.c (VSH_OFLAG_EMPTY_OK): New option flag.
(vshCommandOptString): Per the declaration, value is required to
be non-NULL. Honor new flag.
(opts_connect): Allow empty string connection.
The virCommandNewArgs() method would free the virCommandPtr
if it failed to add the args. This meant errors reported in
virCommandAddArgSet() were lost. Simply removing the check
for errors from the constructor means they can be reported
correctly later
The virCommandAddEnvPassCommon() method failed to check for
errors before reallocating the cmd->env array, causing a
potential SEGV if cmd was NULL
The virCommandAddArgSet() method needs to validate that at
least 1 element in 'val's parameter is non-NULL, otherwise
code like
cmd = virCommandNew(binary)
virCommandAddAtg(cmd, "foo")
Would end up trying todo execve("foo"), if binary was
NULL.
The virSetNonBlock() API only allows enabling non-blocking
operations. It doesn't allow turning blocking back on. Add
a new API to allow arbitrary toggling.
* src/libvirt_private.syms, src/util/util.h
src/util/util.c: Add virSetBlocking
This patch fix a simple bug in virDomainSetMemoryFlags function.
The patch sent before lacks the consideration of the case
where the driver doesn't support virDomainSetMemoryFlags API.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
The current LXC I/O controller looks for HUP to detect
when a guest has quit. This isn't reliable as during
initial bootup it is possible that 'init' will close
the console and let mingetty re-open it. The shutdown
of containers was also flakey because it only killed
the libvirt I/O controller and expected container
processes to gracefully follow.
Change the I/O controller such that when it see HUP
or an I/O error, it uses kill($PID, 0) to see if the
process has really quit.
Change the container shutdown sequence to use the
virCgroupKillPainfully function to ensure every
really goes away
This change makes the use of the 'cpu', 'devices'
and 'memory' cgroups controllers compulsory with
LXC
* docs/drvlxc.html.in: Document that certain cgroups
controllers are now mandatory
* src/lxc/lxc_controller.c: Check if PID is still
alive before quitting on I/O error/HUP
* src/lxc/lxc_driver.c: Use virCgroupKillPainfully
This is the part allowing to dynamically resize the debug log
buffer from it's default 64kB size. The buffer is now dynamically
allocated.
It adds a new API virLogSetBufferSize() which resizes the buffer
If passed a zero size, the buffer is deallocated and we do the small
optimization of not formatting messages which are not output anymore.
On the daemon side, it just adds a new option log_buffer_size to
libvirtd.conf and call virLogSetBufferSize() if needed
* src/util/logging.h src/util/logging.c src/libvirt_private.syms:
make buffer dynamic and add virLogSetBufferSize() internal API
* daemon/libvirtd.conf: document the new log_buffer_size option
* daemon/libvirtd.c: read and use the new log_buffer_size option
Outgoing migration still uses a Unix socket and or exec netcat until
the next patch.
* src/qemu/qemu_migration.c (qemuMigrationPrepareTunnel):
Replace Unix socket with simpler pipe.
Suggested by Paolo Bonzini.
Commit 7f193757 renamed libvirt-guests.init from .in to .sh, which
made it slip past sc_TAB_in_indentation. I nearly reintroduced a
tab, so I'm pushing this to prevent that from happening.
* cfg.mk (sc_TAB_in_indentation): Update rule to include .sh files.
* .dir-locals.el: List spacing preference for .sh files.
At least protect the $uri variable against further expansion by properly
quoting it. While doing that, also quote all other variables to protect
against shell meta characters.
Signed-off-by: Philipp Hahn <hahn@univention.de>
The newly added call to qemuAuditNetDevice in qemuPhysIfaceConnect was
assuming that res_ifname (the name of the macvtap device) was always
valid, but this isn't the case. If openMacvtapTap fails, it always
returns NULL, which would result in a segv.
Since the audit log only needs a record of devices that are actually
sent to qemu, and a failure to open the macvtap device means that no
device will be sent to qemu, we can solve this problem by only doing
the audit if openMacvtapTap is successful (in which case res_ifname is
guaranteed valid).
Normally dnsmasq will send a default route (the address of the host in
the network definition) to any client requesting an address via
DHCP. On an isolated network this makes no sense, as we have iptables
to prevent any traffic going out via that interface, so anything sent
that way would be dropped anyway.
This extra/unusable default route becomes problematic if you have
setup a guest with multiple network interfaces, with one connected to
an isolated network and another that provides connectivity to the
outside (example - one interface directly connecting to a physical
interface via macvtap, with a second connected to an isolated network
so that the host and guest can communicate (macvtap doesn't support
guest<->host communication without an external switch that supports
vepa, or reflecting all traffic back)). In this case, if the guest
chooses the default route of the isolated network, the guest will not
be able to get network traffic beyond the host.
To prevent dnsmasq from sending a default route, you can tell it to
send 0 bytes of data for the default route option (option number 3)
with --dhcp-option=3 (normally the data to send for the option would
follow the option number; no extra data means "don't send this option").
I have checked on RHEL5 (a good representative of the oldest supported
libvirt platforms) and its version of dnsmasq (2.45) does support
--dhcp-option, so this shouldn't create any compatibility problems.
This partially reverts (and fixes that part in a different way) commit
e4384459c9, which replaced
``/usr/bin/python'' with ``/usr/bin/env python'' in all examples or
scripts used during build to generate other files.
However, python bindings module is compiled and linked against a
specific python discovered or explicitly provided in configure phase.
Thus libvirt.py, which is generated and installed into the system,
should use the same python binary for which the module has been built.
The hunk in Makefile.am replaces $(srcdir) with $(PYTHON), which might
seem wrong but it is not. generator.py didn't use any of its command
line arguments so passing $(srcdir) to it was redundant.
Otherwise connection of hypervisor driver will be leaked when
one shutdown the guest in console. e.g.
[root@localhost]# init 0
......
init: Re-executing /sbin/init
Halting system...
Power down.
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
As pointed on CVE-2011-1146, some API forgot to check the read-only
status of the connection for entry point which modify the state
of the system or may lead to a remote execution using user data.
The entry points concerned are:
- virConnectDomainXMLToNative
- virNodeDeviceDettach
- virNodeDeviceReAttach
- virNodeDeviceReset
- virDomainRevertToSnapshot
- virDomainSnapshotDelete
* src/libvirt.c: fix the above set of entry points to error on read-only
connections
By default, all dnsmasq processes share the same leases file. libvirt
also uses the --dhcp-lease-max option to control the maximum number of
leases allowed. The problem is that libvirt puts in a number equal to
the number of addresses in the range for the one network handled by a
single instance of dnsmasq, but dnsmasq checks the total number of
leases in the file (which could potentially contain many more).
The solution is to tell each instance of dnsmasq to create and use its
own leases file. (/var/lib/libvirt/network/<net-name>.leases).
This file is created by dnsmasq when it starts, but not deleted when
it exists. This is fine when the network is just being stopped, but if
the leases file was left around when a network was undefined, we could
end up with an ever-increasing number of dead files - instead, we
explicitly unlink the leases file when a network is undefined.
Note that Ubuntu carries a patch against an older version of libvirt for this:
hhttps://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/713071
ttp://bazaar.launchpad.net/~serge-hallyn/ubuntu/maverick/libvirt/bugall/revision/109
I was certain I'd also seen discussion of this on libvir-list or
libvirt-users, but couldn't find it.
This fixes a regression introduced in commit ad48df, and reported on
the libvirt-users list:
https://www.redhat.com/archives/libvirt-users/2011-March/msg00018.html
The problem in that commit was that we began searching a list of ip
address definitions (rather than just having one) to look for a dhcp
range or static host; when we didn't find any, our pointer (ipdef) was
left at NULL, and when ipdef was NULL, we returned without starting up
dnsmasq.
Previously dnsmasq was started even without any dhcp ranges or static
entries, because it's still useful for DNS services.
Another problem I noticed while investigating was that, if there are
IPv6 addresses, but no IPv4 addresses of any kind, we would jump out
at an ever higher level in the call chain.
This patch does the following:
1) networkBuildDnsmasqArgv() = all uses of ipdef are protected from
NULL dereference. (this patch doesn't change indentation, to make
review easier. The next patch will change just the
indentation). ipdef is intended to point to the first IPv4 address
with DHCP info (or the first IPv4 address if none of them have any
dhcp info).
2) networkStartDhcpDaemon() = if the loop looking for an ipdef with
DHCP info comes up empty, we then grab the first IPv4 def from the
list. Also, instead of returning if there are no IPv4 defs, we just
return if there are no IP defs at all (either v4 or v6). This way a
network that is IPv6-only will still get dnsmasq listening for DNS
queries.
3) in networkStartNetworkDaemon() - we will startup dhcp not just if there
are any IPv4 addresses, but also if there are any IPv6 addresses.
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED uses INT64_MAX but stdint.h
was not and should not be included. Therefore, libvirt.h was
not self-contained.
Instead of including stdint.h specify the value directly.
awk splits the line on consecutive spaces, which breaks getting the name
of a domain whose name contains spaces. Use sed instead to strip the
"Name:" prefix from the line
Signed-off-by: Philipp Hahn <hahn@univention.de>
The Relax-NG schema for domains regarding <hostdev> doesn't match what's
implemented in src/conf/domain_conf.c#virDomainHostdevDefFormat(): The
implementation only requires @type, but the schema currently either
required none or all three attributes (@mode, @type, and @managed) to be
defined together, because they are declared in the same
<optional)-section. (@managed is currently even undocumented on
<http://libvirt.org/formatdomain.html#elementsUSB>).
Thus the following minimal <hostdev>-example fails to validate:
<domain type='test'>
<name>N</name>
<memory>4096</memory>
<bootloader>/bin/false</bootloader>
<os>
<type arch='x86_64' machine='xenpv'>linux</type>
</os>
<devices>
<hostdev type='pci'>
<source>
<address bus='0x06' slot='0x00' function='0x0'/>
</source>
</hostdev>
</devices>
</domain>
The schema is changed to match the current implementation:
1. @mode is optional (which defaults to 'subsystem')
2. @type is required
3. @managed is optional (which defaults to 'no')
The documentation is updated to mention @managed.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Currently a single storage volume with a broken backing file will disable the
whole storage pool. This can happen when the backing file is on some
unavailable network storage or if the backing volume is deleted, while the
storage volumes using it remain.
Since the storage pool can not be re-activated, re-creating the missing
or deleting the now useless volumes using libvirt only is not possible.
Fixing this is a little bit tricky:
1. virStorageBackendProbeTarget() only detects the missing backing file,
if the backing file format is not explicitly specified. If the
backing file is created using
kvm-img create -f qcow2 -o backing_fmt=qcow2,backing_file=... ...
no error is detected at this stage.
The new return code -3 signals that the backing file could not be
opened.
2. The backingStore.format must be >= 0, since values < 0 would break
virStorageVolTargetDefFormat() when dumping the XML data such as
<format type='...'/>
Because of this the format is faked as VIR_STORAGE_FILE_RAW.
3. virStorageBackendUpdateVolTargetInfo() always opens the backing file
and thus always detects a missing backing file.
Since it "only" updates the capacity, allocation, owner, group, mode
and SELinux label, just ignore errors at this stage, print an error
message and continue.
4. Using vol-dump on a broken volume still doesn't work, but at least
vol-destroy and pool-refresh do work now.
To reproduce:
dir=$(mktemp -d)
virsh pool-create-as tmp dir '' '' '' '' "$dir"
virsh vol-create-as --format qcow2 tmp back 1G
virsh vol-create-as --format qcow2 --backing-vol-format qcow2 --backing-vol back tmp cow 1G
virsh vol-delete --pool tmp back
virsh pool-refresh tmp
After the last step, the pool will be gone (because it was not persistent). As
long as the now broken image stays in the directory, you will not be able to
re-create or re-start the pool.
Signed-off-by: Philipp Hahn <hahn@univention.de>
This patchs adds documentation about the 802.1Qbg related parameters
of the virtualport element in a 'direct' interface definition.
Signed-off-by: Gerhard Stenzel <gerhard.stenzel@de.ibm.com>
This patch adds the new options (--live and --config) to "virsh setmem" command.
The behavior of above options is the same as that of "virsh setvcpus" and so on.
That is, when the --config option is specified, a modification is effective for
the persistent domain. Moreover we can modify the memory size of inactive domains
as well as that of active domains.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This patch introduces a new libvirt API (virDomainSetMemoryFlags) and
a flag (virDomainMemoryModFlags).
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Opening raw network devices with the intent of passing those fds to
qemu is worth an audit point. This makes a multi-part audit: first,
we audit the device(s) that libvirt opens on behalf of the MAC address
of a to-be-created interface (which can independently succeed or
fail), then we audit whether qemu actually started the network device
with the same MAC (so searching backwards for successful audits with
the same MAC will show which fd(s) qemu is actually using). Note that
it is possible for the fd to be successfully opened but no attempt
made to pass the fd to qemu (for example, because intermediate
nwfilter operations failed) - no interface start audit will occur in
that case; so the audit for a successful opened fd does not imply
rights given to qemu unless there is a followup audit about the
attempt to start a new interface.
Likewise, when a network device is hot-unplugged, there is only one
audit message about the MAC being discontinued; again, searching back
to the earlier device open audits will show which fds that qemu quits
using (and yes, I checked via /proc/<qemu-pid>/fd that qemu _does_
close out the fds associated with an interface on hot-unplug). The
code would require much more refactoring to be able to definitively
state which device(s) were discontinued at that point, since we
currently don't record anywhere in the XML whether /dev/vhost-net was
opened for a given interface.
* src/qemu/qemu_audit.h (qemuAuditNetDevice): New prototype.
* src/qemu/qemu_audit.c (qemuAuditNetDevice): New function.
* src/qemu/qemu_command.h (qemuNetworkIfaceConnect)
(qemuPhysIfaceConnect, qemuOpenVhostNet): Adjust prototype.
* src/qemu/qemu_command.c (qemuNetworkIfaceConnect)
(qemuPhysIfaceConnect, qemuOpenVhostNet): Add audit points and
adjust parameters.
(qemuBuildCommandLine): Adjust caller.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
Since libvirt always passes /dev/net/tun to qemu via fd, we should
never trigger the cases where qemu tries to directly open the
device. Therefore, it is safer to deny the cgroup device ACL.
* src/qemu/qemu_cgroup.c (defaultDeviceACL): Remove /dev/net/tun.
* src/qemu/qemu.conf (cgroup_device_acl): Reflect this change.
qemu driver in libvirt gained support for creating domain snapshots
almost a year ago in libvirt 0.8.0. Since then we enabled QMP support
for qemu >= 0.13.0 but QMP equivalents of {save,load,del}vm commands are
not implemented in current qemu (0.14.0) so the domain snapshot support
is not very useful.
This patch detects when the appropriate QMP command is not implemented
and tries to use human-monitor-command (aka HMP passthrough) to run
it's HMP equivalent.
JSON monitor command implementation can now just directly call text
monitor implementation and it will be automatically encapsulated into
QMP's human-monitor-command.
Some qemu monitor event handlers were issuing inadequate warning when
virDomainSaveStatus() failed. They copied the message from I/O error
handler without customizing it to provide better information on why
virDomainSaveStatus() was called.
For newer qemu-img, the help string for "backing file format" is
"[-F backing_fmt]".
Fix the wrong logic error by commit e997c268.
* src/storage/storage_backend.c
Adding audit points showed that we were granting too much privilege
to qemu; it should not need any mknod rights to recreate any
devices. On the other hand, lxc should have all device privileges.
The solution is adding a flag parameter.
This also lets us restrict write access to read-only disks.
* src/util/cgroup.h (virCgroup*Device*): Adjust prototypes.
* src/util/cgroup.c (virCgroupAllowDevice)
(virCgroupAllowDeviceMajor, virCgroupAllowDevicePath)
(virCgroupDenyDevice, virCgroupDenyDeviceMajor)
(virCgroupDenyDevicePath): Add parameter.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Update clients.
* src/lxc/lxc_controller.c (lxcSetContainerResources): Likewise.
* src/qemu/qemu_cgroup.c: Likewise.
(qemuSetupDiskPathAllow): Also, honor read-only disks.
Although the cgroup device ACL controller path can be worked out
by researching the code, it is more efficient to include that
information directly in the audit message.
* src/util/cgroup.h (virCgroupPathOfController): New prototype.
* src/util/cgroup.c (virCgroupPathOfController): Export.
* src/libvirt_private.syms: Likewise.
* src/qemu/qemu_audit.c (qemuAuditCgroup): Use it.
Device names can be manipulated, so it is better to also log
the major/minor device number corresponding to the cgroup ACL
changes that libvirt made. This required some refactoring
of the relatively new qemu cgroup audit code.
Also, qemuSetupChardevCgroup was only auditing on failure, not success.
* src/qemu/qemu_audit.h (qemuDomainCgroupAudit): Delete.
(qemuAuditCgroup, qemuAuditCgroupMajor, qemuAuditCgroupPath): New
prototypes.
* src/qemu/qemu_audit.c (qemuDomainCgroupAudit): Rename...
(qemuAuditCgroup): ...and drop a parameter.
(qemuAuditCgroupMajor, qemuAuditCgroupPath): New functions, to
allow listing device major/minor in audit.
(qemuAuditGetRdev): New helper function.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Adjust callers.
* src/qemu/qemu_cgroup.c (qemuSetupDiskPathAllow)
(qemuSetupHostUsbDeviceCgroup, qemuSetupCgroup)
(qemuTeardownDiskPathDeny): Likewise.
(qemuSetupChardevCgroup): Likewise, fixing missing audit.
* src/qemu/qemu_audit.c (qemuDomainHostdevAudit): Avoid use of
"type", which has a pre-defined meaning.
(qemuDomainCgroupAudit): Likewise, as well as "item".
I noticed these while testing 'make dist'.
Parsing ./../src/util/event.c
Function comment for virEventRegisterDefaultImpl lacks description of return value
Function comment for virEventRunDefaultImpl lacks description of return value
Parsing ./../src/util/virterror.c
Missing comment for function virSetErrorLogPriorityFunc
* src/util/event.c (virEventRegisterDefaultImpl)
(virEventRunDefaultImpl): Document return types.
* src/util/virterror.c (virSetErrorLogPriorityFunc): Provide docs.
virRun gives pretty useful error output, let's not overwrite it unless there
is a good reason. Some places were providing more information about what
the commands were _attempting_ to do, however that's usually less useful from
a debugging POV than what actually happened.
as described at
http://wiki.debian.org/ToolChain/DSOLinkinghttps://fedoraproject.org/wiki/UnderstandingDSOLinkChange
otherwise the build fails on current Debian unstable with:
CCLD libvirtd
/usr/bin/ld: ../src/.libs/libvirt_driver_lxc.a(libvirt_driver_lxc_la-lxc_container.o): undefined reference to symbol 'capng_apply'
/usr/bin/ld: note: 'capng_apply' is defined in DSO //usr/lib/libcap-ng.so.0 so try adding it to the linker command line
CCLD libvirtd
/usr/bin/ld: ../src/.libs/libvirt_driver_storage.a(libvirt_driver_storage_la-storage_backend.o): undefined reference to symbol 'fgetfilecon'
/usr/bin/ld: note: 'fgetfilecon' is defined in DSO //lib/libselinux.so.1 so try adding it to the linker command line
//lib/libselinux.so.1: could not read symbols: Invalid operation
and similar errors.
On cygwin:
CC libvirt_driver_security_la-security_dac.lo
security/security_dac.c: In function 'virSecurityDACSetProcessLabel':
security/security_dac.c:618: warning: format '%d' expects type 'int', but argument 7 has type 'uid_t' [-Wformat]
We've done this before (see src/util/util.c).
* src/security/security_dac.c (virSecurityDACSetProcessLabel): On
cygwin, uid_t is a 32-bit long.
On cygwin:
CC libvirt_util_la-cgroup.lo
util/cgroup.c: In function 'virCgroupKillRecursiveInternal':
util/cgroup.c:1458: warning: implicit declaration of function 'virCgroupNew' [-Wimplicit-function-declaration]
* src/util/cgroup.c (virCgroupKill): Don't build on platforms
where virCgroupNew is unsupported.
When building libvirt without libvirtd, I receive the following errors:
make[1]: Leaving directory `/home/wency/source/test/libvirt/src'
(cd daemon && make top_distdir=../libvirt-0.8.8 distdir=../libvirt-0.8.8/daemon \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[1]: Entering directory `/home/wency/source/test/libvirt/daemon'
make[1]: *** No rule to make target `libvirtd.8.in', needed by `distdir'. Stop.
This bug was caused by commit 6db98a2d.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
as described at
http://wiki.debian.org/ToolChain/DSOLinkinghttps://fedoraproject.org/wiki/UnderstandingDSOLinkChange
otherwise the build fails on current Debian unstable with:
CCLD virsh
/usr/bin/ld: virsh-virsh.o: undefined reference to symbol 'xmlSaveTree@@LIBXML2_2.6.8'
/usr/bin/ld: note: 'xmlSaveTree@@LIBXML2_2.6.8' is defined in DSO //usr/lib/libxml2.so.2 so try adding it to the linker command line
//usr/lib/libxml2.so.2: could not read symbols: Invalid operation
This is needed to detect situations when optional argument was
specified with non-integer value: '--int-opt foo'. To keep functions
uniform vshCommandOptString function was also changed, because it
returns tri-state value as well. Given result pointer is updated only
in case of success. If parsing fails, result is not updated at all.
Apparently some signals found on Unix are not exposed, this led
to a compilation failure
* src/util/logging.c: make code related to each signal dependant
upon the definition of that signal
The way to detach a USB disk is the same as that to detach a SCSI
disk. Rename this function and we can use it to detach a USB disk.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
When I use newest libvirt to save a domain, libvirtd will be deadlock.
Here is the output of gdb:
(gdb) thread 3
[Switching to thread 3 (Thread 0x7f972a1fc710 (LWP 30265))]#0 0x000000351fe0e034 in __lll_lock_wait () from /lib64/libpthread.so.0
(gdb) bt
at qemu/qemu_driver.c:2074
ret=0x7f972a1fbbe0) at remote.c:2273
(gdb) thread 7
[Switching to thread 7 (Thread 0x7f9730bcd710 (LWP 30261))]#0 0x000000351fe0e034 in __lll_lock_wait () from /lib64/libpthread.so.0
(gdb) bt
(gdb) p *(virMutexPtr)0x6fdd60
$2 = {lock = {__data = {__lock = 2, __count = 0, __owner = 30261, __nusers = 1, __kind = 0, __spins = 0, __list = {__prev = 0x0, __next = 0x0}},
__size = "\002\000\000\000\000\000\000\000\065v\000\000\001", '\000' <repeats 26 times>, __align = 2}}
(gdb) p *(virMutexPtr)0x1a63ac0
$3 = {lock = {__data = {__lock = 2, __count = 0, __owner = 30265, __nusers = 1, __kind = 0, __spins = 0, __list = {__prev = 0x0, __next = 0x0}},
__size = "\002\000\000\000\000\000\000\000\071v\000\000\001", '\000' <repeats 26 times>, __align = 2}}
(gdb) info threads
7 Thread 0x7f9730bcd710 (LWP 30261) 0x000000351fe0e034 in __lll_lock_wait () from /lib64/libpthread.so.0
6 Thread 0x7f972bfff710 (LWP 30262) 0x000000351fe0b43c in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0
5 Thread 0x7f972b5fe710 (LWP 30263) 0x000000351fe0b43c in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0
4 Thread 0x7f972abfd710 (LWP 30264) 0x000000351fe0b43c in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0
* 3 Thread 0x7f972a1fc710 (LWP 30265) 0x000000351fe0e034 in __lll_lock_wait () from /lib64/libpthread.so.0
2 Thread 0x7f97297fb710 (LWP 30266) 0x000000351fe0b43c in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0
1 Thread 0x7f9737aac800 (LWP 30260) 0x000000351fe0803d in pthread_join () from /lib64/libpthread.so.0
The reason is that we will try to lock some object in callback function, and we may call event API with locking the same object.
In the function virEventDispatchHandles(), we unlock eventLoop before calling callback function. I think we should
do the same thing in the function virEventCleanupTimeouts() and virEventCleanupHandles().
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Not all applications have an existing event loop they need
to integrate with. Forcing them to implement the libvirt
event loop integration APIs is an undue burden. This just
exposes our simple poll() based implementation for apps
to use. So instead of calling
virEventRegister(....callbacks...)
The app would call
virEventRegisterDefaultImpl()
And then have a thread somewhere calling
static bool quit = false;
....
while (!quit)
virEventRunDefaultImpl()
* daemon/libvirtd.c, tools/console.c,
tools/virsh.c: Convert to public event loop APIs
* include/libvirt/libvirt.h.in, src/libvirt_private.syms: Add
virEventRegisterDefaultImpl and virEventRunDefaultImpl
* src/util/event.c: Implement virEventRegisterDefaultImpl
and virEventRunDefaultImpl using poll() event loop
* src/util/event_poll.c: Add full error reporting
* src/util/virterror.c, include/libvirt/virterror.h: Add
VIR_FROM_EVENTS
The event loop implementation is used by more than just the
daemon, so move it into the shared area.
* daemon/event.c, src/util/event_poll.c: Renamed
* daemon/event.h, src/util/event_poll.h: Renamed
* tools/Makefile.am, tools/console.c, tools/virsh.c: Update
to use new virEventPoll APIs
* daemon/mdns.c, daemon/mdns.c, daemon/Makefile.am: Update
to use new virEventPoll APIs
The daemon code calls virEventAddHandleImpl directly instead
of calling the wrapper virEventAddHandle.
* tools/console.c, daemon/libvirtd.c, daemon/mdns.c: Convert to
use primary event APIs
* src/util/logging.c: fix virLogDumpAllFD() to avoid snprintf, simplify
the code and provide more useful signal descriptions. Also remove an
unused variable.
For qemu names the primary vga as "qxl-vga":
1) if vram is specified for 2nd qxl device:
-vga qxl -global qxl-vga.vram_size=$SIZE \
-device qxl,id=video1,vram_size=$SIZE,...
2) if vram is not specified for 2nd qxl device, (use the default
set by global):
-vga qxl -global qxl-vga.vram_size=$SIZE \
-device qxl,id=video1,...
For qemu names all qxl devices as "qxl":
1) if vram is specified for 2nd qxl device:
-vga qxl -global qxl.vram_size=$SIZE \
-device qxl,id=video1,vram_size=$SIZE ...
2) if vram is not specified for 2nd qxl device:
-vga qxl -global qxl-vga.vram_size=$SIZE \
-device qxl,id=video1,...
"-global" is the only way to define vram_size for the primary qxl
device, regardless of how qemu names it, (It's not good a good
way, as original idea of "-global" is to set a global default for
a driver property, but to specify vram for first qxl device, we
have to use it).
For other qxl devices, as they are represented by "-device", could
specify it directly and seperately for each, and it overrides the
default set by "-global" if specified.
v1 - v2:
* modify "virDomainVideoDefaultRAM" so that it returns 16M as the
default vram_size for qxl device.
* vram_size * 1024 (qemu accepts bytes for vram_size).
* apply default vram_size for qxl device for which vram_size is
not specified.
* modify "graphics-spice" tests (more sensiable vram_size)
* Add an argument of virDomainDefPtr type for qemuBuildVideoDevStr,
to use virDomainVideoDefaultRAM in qemuBuildVideoDevStr).
v2 - v3:
* Modify default video memory size for qxl device from 16M to 24M
* Update codes to be consistent with changes on qemu_capabilities.*
In case of imminent crash or upon request (signal USR2),
dump the logging buffer to the libvirtd.log file for
post-mortem analysis
* daemon/libvirtd.c: create a sig_fatal() handler connected to
SIGFPE SIGSEGV SIGILL SIGABRT SIGBUS and SIGUSR2, just dumping
the log buffer using virLogEmergencyDumpAll
virLogEmergencyDumpAll() allows to dump the content of the
debug buffer from within a signal handler. It saves to all
log file or stderr if none is found
* src/util/logging.h src/util/logging.c: add the new API
and cleanup the old virLogDump code
* src/libvirt_private.syms: exports it as a private symbol
As the file may grow quite a bit especially with debug turned on.
* daemon/libvirtd.logrotate.in daemon/Makefile.am libvirt.spec.in:
add new logrotate file for the daemon log
Syslog is not the best place to go search for libvirt error
logs, change it to a default file output libvirtd.log, but
still keep standard error if not run as a daemon.
Depending on whether it's run as root or user, the log is saved
in the local state dir or in $HOME/.libvirt.
* daemon/libvirtd.c: change default logging to go to libvirtd.log
Initially only the log actually written out by libvirt were
saved on the memory buffer, this patch forces all informations
including info and debug to be saved in memory too. This is
useful to get full data in case of crash.
This was also found while investigating
https://bugzilla.redhat.com/show_bug.cgi?id=670848
An EOF on a domain's monitor socket results in an event being queued
to handle the EOF. The handler calls qemuProcessHandleMonitorEOF. If
it is a transient domain, this leads to a call to
virDomainRemoveInactive, which removes the domain from the driver's
hashtable and unref's it. Nowhere in this code is the qemu driver lock
acquired.
However, all modifications to the driver's domain hashtable *must* be
done while holding the driver lock, otherwise the hashtable can become
corrupt, and (even more likely) another thread could call a different
hashtable function and acquire a pointer to the domain that is in the
process of being destroyed.
To prevent such a disaster, qemuProcessHandleMonitorEOF must get the
qemu driver lock *before* it gets the DomainObj's lock, and hold it
until it is finished with the DomainObj. This guarantees that nobody
else modifies the hashtable at the same time, and that anyone who had
already gotten the DomainObj from the hashtable prior to this call has
finished with it before we remove/destroy it.
This was found while researching the root cause of:
https://bugzilla.redhat.com/show_bug.cgi?id=670848
virDomainUnref should only be called with the lock held for the
virDomainObj in question. However, when a transient qemu domain gets
EOF on its monitor socket, it queues an event which frees the monitor,
which unref's the virDomainObj without first locking it. If another
thread has already locked the virDomainObj, the modification of the
refcount could potentially be corrupted. In an extreme case, it could
also be potentially unlocked by virDomainObjFree, thus left open to
modification by anyone else who would have otherwise waited for the
lock (not to mention the fact that they would be accessing freed
data!).
The solution is to have qemuMonitorFree lock the domain object right
before unrefing it. Since the caller to qemuMonitorFree doesn't expect
this lock to be held, if the refcount doesn't go all the way to 0,
qemuMonitorFree must unlock it after the unref.
In virFileOperation, the parent does a fallback to a non-fork
attempt if it detects that the child returned EACCES. However,
the child was calling _exit(-EACCES), which does _not_ appear
as EACCES in the parent.
* src/util/util.c (virFileOperation): Correctly pass EACCES from
child to parent.
virSecurityDAC{Set,Restore}ChardevCallback expect virSecurityManagerPtr,
but are passed virDomainObjPtr instead. This makes
virSecurityDACSetChardevLabel set a wrong uid/gid on chardevs. This
patch fixes this behaviour.
Signed-off-by: Soren Hansen <soren@linux2go.dk>
This fixes a possible crash of libvirtd during its startup. When qemu
driver reconnects to running domains, it iterates over all domain
objects in a hash. When reconnecting to an associated qemu monitor
fails and the domain is transient, it's immediately removed from the
hash. Despite the fact that it's explicitly forbidden to do so. If
libvirtd is lucky enough, virHashForEach will access random memory when
the callback finishes and the deamon will crash.
Since it's trivial to fix virHashForEach to allow removal of hash
entries while iterating through them, I went this way instead of fixing
qemuReconnectDomain callback (and possibly others) to avoid deleting the
entries.
qemudDomainSaveImageStartVM was evil - it closed the incoming fd
argument on some, but not all, code paths, without informing the
caller about that action. No wonder that this resulted in
double-closes: https://bugzilla.redhat.com/show_bug.cgi?id=672725
* src/qemu/qemu_driver.c (qemudDomainSaveImageStartVM): Alter
signature, to avoid double-close.
(qemudDomainRestore, qemudDomainObjRestore): Update callers.
When a SPICE or VNC graphics controller is present, and sound is
piggybacked over a channel to the graphics device rather than
directly accessing host hardware, then there is no need to grant
host hardware access to that qemu process.
* src/qemu/qemu_cgroup.c (qemuSetupCgroup): Prevent sound with
spice, and with vnc when vnc_allow_host_audio is 0.
Reported by Daniel Berrange.
The kill() function doesn't exist on Win32, so it needs to be
checked for at build time & code disabled in cgroups
* configure.ac: Check for kill()
* src/util/cgroup.c: Stub out virCGroupKill* functions
when kill() isn't available
this is the patch to add support for multiple serial ports to the
libvirt Xen driver. It support both old style (serial = "pty") and
new style (serial = [ "/dev/ttyS0", "/dev/ttyS1" ]) definition and
tests for xml2sexpr, sexpr2xml and xmconfig have been added as well.
Written and tested on RHEL-5 Xen dom0 and working as designed but
the Xen version have to have patch for RHBZ #614004 but this patch
is for upstream version of libvirt.
Also, this patch is addressing issue described in RHBZ #670789.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
this is the patch to fix the virDomainChrDefParseTargetXML() functionality
to parse the target port from XML if available. This is necessary for
multiple serial port support which is the second part of this patch.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
The virCgroupKill method kills all PIDs found in a cgroup
The virCgroupKillRecursively method does this recursively
for child cgroups.
The virCgroupKillPainfully method does a recursive kill
several times in a row until everything has really died
Relax the restriction that the hash table key must be a string
by allowing an arbitrary hash code generator + comparison func
to be provided
* util/hash.c, util/hash.h: Allow any pointer as a key
* internal.h: Include stdbool.h as standard.
* conf/domain_conf.c, conf/domain_conf.c,
conf/nwfilter_params.c, nwfilter/nwfilter_gentech_driver.c,
nwfilter/nwfilter_gentech_driver.h, nwfilter/nwfilter_learnipaddr.c,
qemu/qemu_command.c, qemu/qemu_driver.c,
qemu/qemu_process.c, uml/uml_driver.c,
xen/xm_internal.c: s/char */void */ in hash callbacks
Since the deallocator is passed into the constructor of
a hash table it is not desirable to pass it into each
function again. Remove it from all functions, but provide
a virHashSteal to allow a item to be removed from a hash
table without deleteing it.
* src/util/hash.c, src/util/hash.h: Remove deallocator
param from all functions. Add virHashSteal
* src/libvirt_private.syms: Add virHashSteal
* src/conf/domain_conf.c, src/conf/nwfilter_params.c,
src/nwfilter/nwfilter_learnipaddr.c,
src/qemu/qemu_command.c, src/xen/xm_internal.c: Update
for changed hash API
When executed from cron, commandtest would fail to correctly
identify daemon processes. Set session ID and process group
IDs at startup to ensure we have a consistent environment to
run in.
* tests/commandtest.c: Call setsid() and setpgid()
Using the 'personality(2)' system call, we can make a container
on an x86_64 host appear to be i686. Likewise for most other
Linux 64bit arches.
* src/lxc/lxc_conf.c: Fill in 32bit capabilities for x86_64 hosts
* src/lxc/lxc_container.h, src/lxc/lxc_container.c: Add API to
check if an arch has a 32bit alternative
* src/lxc/lxc_controller.c: Set the process personality when
starting guest
This is done for two reasons:
- we are getting very close to 64 flags which is the maximum we can use
with unsigned long long
- by using LL constants in enum we already violates C99 constraint that
enum values have to fit into int
When spawning 'init' in the container, set
LIBVIRT_LXC_UUID=XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX
LIBVIRT_LXC_NAME=YYYYYYYYYYYY
to allow guest software to detect & identify that they
are in a container
* src/lxc/lxc_container.c: Set LIBVIRT_LXC_UUID and
LIBVIRT_LXC_NAME env vars
In a couple of commands virsh catches & ignores errors, but fails
to reset last_error. Thus the error is ignored, but still reported
to the user.
* tools/virsh.c: Reset last_error if ignoring an error
The virFileAbsPath was not taking into account the '/' directory
separator when allocating memory for combining cwd + path. Convert
to use virAsprintf to avoid this type of bug completely.
* src/util/util.c: Convert virFileAbsPath to use virAsprintf
Normal practice for /dev/pts is to have it mode=620,gid=5
but LXC was leaving mode=000,gid=0 preventing unprivilegd
users in the guest use of PTYs
* src/lxc/lxc_controller.c: Fix /dev/pts setup
Current code does an IFF_UP on a 8021Qbh interface immediately after a port
profile set. This is ok in most cases except when its the migration prepare
stage. During migration we want to postpone IFF_UP'ing the interface on the
destination host until the source host has disassociated the interface.
This patch moves IFF_UP of the interface to the final stage of migration.
The motivation for this change is to postpone any addr registrations on the
destination host until the source host has done the addr deregistrations.
While at it, for symmetry with associate move ifDown of a 8021Qbh interface
to before disassociate
Currently, we need virIsDevMapperDevice() when we build libvirt with
disk or mpath storage drivers. So we should check device-mapper-devel
when we build with disk storage driver but without mpath storage
driver.
Steps to reproduce this bug:
1. virsh attach-disk domain --source imagefile --target sdb --sourcetype file --driver qemu --subdriver raw
2. virsh detach-device controller.xml # remove scsi controller 0
3. virsh detach-disk domain sdb
error: Failed to detach disk
error: operation failed: detaching scsi0-0-1 device failed: Device 'scsi0-0-1' not found
I think we should not detach a controller when it is used by some other device.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Alas, the shell is not a real programming language.
Patch generated by manual confirmation of vim's
s/[^"]\@<=\$\S\+\s\@=/"&"/gc
and
s/\(echo \)\@<=[^"].*\$.*$/"&"/c matches.
This patch generate a lot of noise and carries little benefits, as
I do not really expect $PKI to contain spaces or backticks. I'm just
fuming, and would not really mind if this patch is ignored
A diff of 'make dist' from in-tree vs. a VPATH build showed
that we were missing docs/api_extension/*.patch files, but
shipping other files that we didn't need.
* bootstrap.conf (gnulib_extra_files): Don't distribute files we
don't care about.
* docs/Makefile.am (patches): Perform wildcard correctly.
Right now, 'man libvirtd' includes information that depends on
configure results, so it must be generated on the fly and live
in $(builddir); however, requiring pod2man on all end user
machines is overkill. Meanwhile, 'man virsh' doesn't mention
any configure results, so it can be built at 'make dist' time.
If that situation changes in the future, we can generate virsh.1
in the same way that we generate libvirtd.8.
* daemon/Makefile.am (libvirtd.8.in): New rule, to run pod2man in
advance of distribution.
(libvirtd.8): Use only sed from tarball.
(EXTRA_DIST): Ship new file.
(libvirtd.pod): Delete unused rule.
(man8_MANS): Let automake know which section to use.
(CLEANFILES, MAINTAINERCLEANFILES): Adjust to new files.
* tools/Makefile.am (dist_man1_MANS): Distribute pre-built man
pages, fine since they don't require any substitution.
(virt-xml-validate.1, virt-pki-validate.1): Change input source.
(virsh.1): Build into srcdir.
(CLEANFILES, MAINTAINERCLEANFILES): Adjust to new build style.
* daemon/.gitignore: Update.
Reported by Diego Elio Pettenò.
Done mechanically with:
$ git grep -l '\bDEBUG0\? *(' | xargs -L1 sed -i 's/\bDEBUG0\? *(/VIR_&/'
followed by manual deletion of qemudDebug in daemon/libvirtd.c, along
with a single 'make syntax-check' fallout in the same file, and the
actual deletion in src/util/logging.h.
* src/util/logging.h (DEBUG, DEBUG0): Delete.
* daemon/libvirtd.h (qemudDebug): Likewise.
* global: Change remaining clients over to VIR_DEBUG counterpart.
XSLT allows for two ways of generating the output of transformation.
Either implicit, which xsltproc prints to stdout and can be redirected
to a file using -o file. Or explicit, which means the stylesheet
contains <xsl:document> element which specifies where the output should
be saved. This can be used for generating more files by a single run of
xsltproc and -o directory/ can change the directory where the output
files will be stored.
devhelp.xsl is special in that it combines both options in one
stylesheet, which doesn't work well with -o:
xsltproc --nonet -o ./devhelp/ ./devhelp/devhelp.xsl ./libvirt-api.xml
Outputs 4 *.html files into ./devhelp but then tries to write to
./devhelp/ as a file (hence the I/O error) rather than writing output to
the fifth file devhelp/libvirt.devhelp.
This patch modifies devhelp.xsl so that all files are generated using
<xsl:document> element and -o directory/ can be used to override output
directory where those files are saved.
The virConnectPtr struct will cache instances of all other
objects. APIs like virDomainLookupByUUID will return a
cached object, so if you do virDomainLookupByUUID twice in
a row, you'll get the same exact virDomainPtr instance.
This does not have any performance benefit, since the actual
logic in virDomainLookupByUUID (and other APIs returning
virDomainPtr, etc instances) is not short-circuited. All
it does is to ensure there is only one single virDomainPtr
in existance for any given UUID.
The caching has a number of downsides though, all relating
to stale data. If APIs aren't careful to always overwrite
the 'id' field in virDomainPtr it may become out of data.
Likewise for the name field, if a guest is renamed, or if
a guest is deleted, and then a new one created with the
same UUID but different name.
This has been an ongoing, endless source of bugs for all
applications using libvirt from languages with garbage
collection, causing them to get virDomainPtr instances
from long ago with stale data.
The caching is also a waste of memory resources, since
both applications, and language bindings often maintain
their own hashtable caches of object instances.
This patch removes all the hash table caching, so all
APIs return brand new virDomainPtr (etc) object instances.
* src/datatypes.h: Delete all hash tables.
* src/datatypes.c: Remove all object caching code
This patch adds the possibility to not just drop packets, but to also have them rejected where iptables at least sends an ICMP msg back to the originator. On ebtables this again maps into dropping packets since rejecting is not supported.
I am adding 'since 0.8.9' to the docs assuming this will be the next version of libvirt.
Two regressions:
Commit df1011ca broke builds for systems that lack devmapper
(non-Linux, as well as Linux with ./autogen.sh --without-libvirtd
and without the libraries present).
Commit ce6fd650 broke cross-compilation, due to a gnulib bug.
* .gnulib: Update to latest, for cross-compilation fix.
* src/util/util.c (virIsDevMapperDevice): Provide stub for
platforms not using storage driver.
* configure.ac (devmapper): Arrange to define HAVE_LIBDEVMAPPER_H.
devmapper issue reported by Wen Congyang.
Etienne Gosset reported that libvirt fails to connect to his ESX
server because it failed to parse its malformed host UUID, that
contains an additional space and lacks one hexdigit in the last
group:
xxxxxxxx-xxxx-xxxx-xxxx- xxxxxxxxxxx
Don't treat this as a fatal error, just ignore it.
Virsh freecell --all was not only getting wrong NUMA nodes count, but
even the NUMA nodes IDs. They doesn't have to be continuous, as I've
found out during testing this. Therefore a modification of
nodeGetCellsFreeMemory() error message.
$ ./configure
...
$ make
...
GEN libvirt.syms
...
$ ./configure --with-driver-modules
...
$ make
...
libvirt.syms doesn't get regenerated but it should as it should
contain virDriverLoadModule now.
* src/Makefile.am (libvirt.syms): Depend on configure changes.
Reported by Matthias Bolte.
libvirt-guests invokes functions in gettext.sh, so we need to
require gettext package in spec file.
Demo with the fix:
% rpm -q gettext
package gettext is not installed
% rpm -ivh libvirt-client-0.8.8-1.fc14.x86_64.rpm
error: Failed dependencies:
gettext is needed by libvirt-client-0.8.8-1.fc14.x86_64
* libvirt.spec.in
There were several occurrences of an extra space inserted between
a function name and the ( opening the argument list in
datatypes.c. This is not consistent with the coding style used in
the rest of this file so removing this extra space makes the
code slightly more readable.
Now that the virHash handling functions call virReportOOMError by
themselves when needed, users of the virHash API no longer need to
do it by themselves. Since users of the virHash API were not
consistently calling virReportOOMError after memory failures from
the virHash code, this has the added benefit of making OOM
reporting from this code more consistent and reliable.
The only difference between these 2 functions is that one errors
out when the entry is already present while the other modifies
the existing entry. Add an helper function with a boolean argument
indicating whether existing entries should be updated or not, and
use this helper in both functions.
The code in virHashUpdateEntry and virHashAddEntry is really
similar. However, the latter rebalances the hash table when
one of its buckets contains too many elements while the former
does not. Fix this discrepancy.
This still doesn't fix {html,devhelp}/libvirt-{libvirt-virterror}.html,
but it's progress in the right direction.
* docs/Makefile.am (%.html): Build into srcdir.
When we attach a disk, but we specify a wrong format of disk image,
qemu monitor command drive_add will fail, but libvirt does not detect
this error.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Followup to commit 17e19add, and would have prevented the bug
independently fixed in commit 76c57a7c.
* src/util/logging.c (virLogMessage): Preserve errno, since
logging should be as unintrusive as possible.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=609463
The problem was that, since a bridge always acquires the MAC address
of the connected interface with the numerically lowest MAC, as guests
are started and stopped, it was possible for the MAC address to change
over time, and this change in the network was being detected by
Windows 7 (it sees the MAC of the default route change), so on each
reboot it would bring up a dialog box asking about this "new network".
The solution is to create a dummy tap interface with a MAC guaranteed
to be lower than any guest interface's MAC, and attach that tap to the
bridge as soon as it's created. Since all guest MAC addresses start
with 0xFE, we can just generate a MAC with the standard "0x52, 0x54,
0" prefix, and it's guaranteed to always win (physical interfaces are
never connected to these bridges, so we don't need to worry about
competing numerically with them).
Note that the dummy tap is never set to IFF_UP state - that's not
necessary in order for the bridge to take its MAC, and not setting it
to UP eliminates the clutter of having an (eg) "virbr0-nic" displayed
in the output of the ifconfig command.
I chose to not auto-generate the MAC address in the network XML
parser, as there are likely to be consumers of that API that don't
need or want to have a MAC address associated with the
bridge.
Instead, in bridge_driver.c when the network is being defined, if
there is no MAC, one is generated. To account for virtual network
configs that already exist when upgrading from an older version of
libvirt, I've added a %post script to the specfile that searches for
all network definitions in both the config directory
(/etc/libvirt/qemu/networks) and the state directory
(/var/lib/libvirt/network) that are missing a mac address, generates a
random address, and adds it to the config (and a matching address to
the state file, if there is one).
docs/formatnetwork.html.in: document <mac address.../>
docs/schemas/network.rng: add nac address to schema
libvirt.spec.in: %post script to update existing networks
src/conf/network_conf.[ch]: parse and format <mac address.../>
src/libvirt_private.syms: export a couple private symbols we need
src/network/bridge_driver.c:
auto-generate mac address when needed,
create dummy interface if mac address is present.
tests/networkxml2xmlin/isolated-network.xml
tests/networkxml2xmlin/routed-network.xml
tests/networkxml2xmlout/isolated-network.xml
tests/networkxml2xmlout/routed-network.xml: add mac address to some tests
An upcoming patch has a use for a tap device to be created that
doesn't need to be actually put into the "up" state, and keeping it
"down" keeps the output of ifconfig from being unnecessarily cluttered
(ifconfig won't show down interfaces unless you add "-a").
bridge.[ch]: add "up" as an arg to brAddTap()
uml_conf.c, qemu_command.c: add "up" (set to "true") to brAddTap() call.
This is in response to:
https://bugzilla.redhat.com/show_bug.cgi?id=629662
Explanation
qemu's virtio-net-pci driver allows setting the algorithm used for tx
packets to either "bh" or "timer". This is done by adding ",tx=bh" or
",tx=timer" to the "-device virtio-net-pci" commandline option.
'bh' stands for 'bottom half'; when this is set, packet tx is all done
in an iothread in the bottom half of the driver. (In libvirt, this
option is called the more descriptive "iothread".)
'timer' means that tx work is done in qemu, and if there is more tx
data than can be sent at the present time, a timer is set before qemu
moves on to do other things; when the timer fires, another attempt is
made to send more data. (libvirt retains the name "timer" for this
option.)
The resulting difference, according to the qemu developer who added
the option is:
bh makes tx more asynchronous and reduces latency, but potentially
causes more processor bandwidth contention since the cpu doing the
tx isn't necessarily the cpu where the guest generated the
packets.
Solution
This patch provides a libvirt domain xml knob to change the option on
the qemu commandline, by adding a new attribute "txmode" to the
<driver> element that can be placed inside any <interface> element in
a domain definition. It's use would be something like this:
<interface ...>
...
<model type='virtio'/>
<driver txmode='iothread'/>
...
</interface>
I chose to put this setting as an attribute to <driver> rather than as
a sub-element to <tune> because it is specific to the virtio-net
driver, not something that is generally usable by all network drivers.
(note that this is the same placement as the "driver name=..."
attribute used to choose kernel vs. userland backend for the
virtio-net driver.)
Actually adding the tx=xxx option to the qemu commandline is only done
if the version of qemu being used advertises it in the output of
qemu -device virtio-net-pci,?
If a particular txmode is requested in the XML, and the option isn't
listed in that help output, an UNSUPPORTED_CONFIG error is logged, and
the domain fails to start.
When the <driver> element (and its "name" attribute) was added to the
domain XML's interface element, a "backend" enum was simply added to
the toplevel of the virDomainNetDef struct.
Ignoring the naming inconsistency ("name" vs. "backend"), this is fine
when there's only a single item contained in the driver element of the
XML, but doesn't scale well as we add more attributes that apply to
the backend of the virtio-net driver, or add attributes applicable to
other drivers.
This patch changes virDomainNetDef in two ways:
1) Rename the item in the struct from "backend" to "name", so that
it's the same in the XML and in the struct, hopefully avoiding
confusion for someone unfamiliar with the function of the
attribute.
2) Create a "driver" union within virDomainNetDef, and a "virtio"
struct in that struct, which contains the "name" enum value.
3) Move around the virDomainNetParse and virDomainNetFormat functions
to allow for simple plugin of new attributes without disturbing
existing code. (you'll note that this results in a seemingly
redundant if() in the format function, but that will no longer be
the case as soon as a 2nd attribute is added).
In the future, new attributes for the virtio driver backend can be
added to the "virtio" struct, and any other network device backend that
needs an attribute will have its own struct added to the "driver"
union.
The introduction of the v3 migration protocol, along with
support for migration cookies, will significantly expand
the size of the migration code. Move it all to a separate
file to make it more manageable
The functions are not moved 100%. The API entry points
remain in the main QEMU driver, but once the public
virDomainPtr is resolved to the internal virDomainObjPtr,
all following code is moved.
This will allow the new v3 API entry points to call into the
same shared internal migration functions
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add
qemuDomainFormatXML helper method
* src/qemu/qemu_driver.c: Remove all migration code
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Add
all migration code.
Move the qemudStartVMDaemon and qemudShutdownVMDaemon
methods into a separate file, renaming them to
qemuProcessStart, qemuProcessStop. All helper methods
called by these are also moved & renamed to match
* src/Makefile.am: Add qemu_process.c/.h
* src/qemu/qemu_command.c: Add qemuDomainAssignPCIAddresses
* src/qemu/qemu_command.h: Add VNC port min/max
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add
domain event queue helpers
* src/qemu/qemu_driver.c, src/qemu/qemu_driver.h: Remove
all QEMU process startup/shutdown functions
* src/qemu/qemu_process.c, src/qemu/qemu_process.h: Add
all QEMU process startup/shutdown functions
The name convention of device mapper disk is different, and 'parted'
can't be used to delete a device mapper disk partition. e.g.
Name Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1
Error: Expecting a partition number.
This patch introduces 'dmsetup' to fix it.
Changes:
- New function "virIsDevMapperDevice" in "src/utils/utils.c"
- remove "is_dm_device" in "src/storage/parthelper.c", use
"virIsDevMapperDevice" instead.
- Requires "device-mapper" for 'with-storage-disk" in "libvirt.spec.in"
- Check "dmsetup" in 'configure.ac' for "with-storage-disk"
- Changes on "src/Makefile.am" to link against libdevmapper
- New entry for "virIsDevMapperDevice" in "src/libvirt_private.syms"
Changes from v1 to v3:
- s/virIsDeviceMapperDevice/virIsDevMapperDevice/g
- replace "virRun" with "virCommand"
- sort the list of util functions in "libvirt_private.syms"
- ATTRIBUTE_NONNULL(1) for virIsDevMapperDevice declaration.
e.g.
Name Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1
Vol /dev/mapper/3600a0b80005ad1d7000093604cae912fp1 deleted
Name Path
-----------------------------------------
* configure.ac docs/news.html.in libvirt.spec.in: bump version and add docs
* po/*.po*: updated Gujarati, Polish and Dutch localisations and regenerated
"qemudDomainSaveFlag" goto wrong label "endjob", which will cause
error when security manager trying to restore label (regression).
As it's more reasonable to check if vm is shutoff immediately, and
return right away if it is, remove the checking in "qemudDomainSaveFlag",
and add checking in "qemudDomainSave".
* src/qemu/qemu_driver.c
Libxml2-Logo-90x34.gif was removed from the repository in Sep 2009
(commit d6d528c) because our docs no longer reference it.
* docs/Makefile.am (install-data-local): Don't install missing file.
* src/util/cgroup.c (virCgroupSetValueStr, virCgroupGetValueStr)
(virCgroupRemoveRecursively): VIR_DEBUG can clobber errno.
(virCgroupRemove): Use VIR_DEBUG rather than DEBUG.
The code expected that host CPU architecture matches the architecture on
which libvirt runs. This is normally true but not in tests, where host
CPU is faked to produce consistent results.
Make with_packager and with_packager_version default to "no". This way
--without-packager-version (as shorthand for --with-packager(-version)=no)
works correctly too.
Prior to this patch libvirt outputs a line like this when
--with-packager(-version) was not specified
# ./daemon/libvirtd
14:11:15.018: 31796: info : libvirt version: 0.8.8, package: ()
Now the unspecified parts are correctly omitted.
Reported by Osier Yang.
clang had 5 reports against virCommand; three were false positives
(a NULL deref in ProcessIO solved by sa_assert, and two uninitialized
memory operations solved by adding an initializer), but two were real.
* src/util/command.c (virCommandProcessIO): Fix real bug of
possible NULL dereference. Teach clang that buf is never NULL.
(virCommandRun): Teach clang that infd is only ever accessed when
initialized.
The processWatchdogEvent fix is real, although it can only trigger
on OOM, since bad things happen if doCoreDump is called with a NULL
pathname argument. The other fixes silence clang, but aren't a real
bug because virReportErrorHelper tolerates a NULL format string even
though *printf does not.
* src/qemu/qemu_driver.c (processWatchdogEvent): Exit on OOM.
(qemuDomainIsActive, qemuDomainIsPersistent, qemuDomainIsUpdated):
Provide valid message.
The SCSI storage backend leaks a string containing the pathname
for each block device it discovers
* src/storage/storage_backend_scsi.c: Free the device name
When creating the virDomain::snapshots hash table, virGetDomain
wasn't checking if the creation was successful. This would then
lead to failures in the vir*DomainSnapshot functions. Better to
report this error early and make virGetDomain fail if the
snapshots hash couldn't be created.
* src/datatypes.c: report failure to make a hash table
A couple of allocation were not calling virReportOOMError on allocation
errors
* src/util/hash.c: add the needed call in virHashCreate and
virHashAddOrUpdateEntry
"virStorageBackendCreateVols":
"names->next" serves as condition expression for "do...while",
however, "names" was shifted before, it then results in one less
loop, and thus, one less volume will be created for mpath pool,
the patch is to fix it.
* src/storage/storage_backend_mpath.c
clang complained that STREQ(group->controllers[i].mountPoint,...) was
a NULL dereference when i==VIR_CGROUP_CONTROLLER_CPUSET, because it
assumes the worst about virCgroupPathOfController. Marking the
argument const doesn't yet have an effect, per this clang bug:
http://llvm.org/bugs/show_bug.cgi?id=7758
So, we use sa_assert, which was designed to shut up false positives
from tools like clang.
* src/util/cgroup.c (virCgroupMakeGroup): Teach clang that there
is no NULL dereference.
This patch reorders the connlimit and comment match extensions relative to the state match (-m state); connlimit being most useful if found after a -m state --state NEW and not before it.
When formatting XML for smartcard device with mode=host, libvirt
generates invalid XML if the device has address info associated:
<smartcard mode='host' <address type='ccid' controller='0' slot='1'/>
Commit 9962e406c6 introduced a
problem where if the VM failed to startup, it would not be
correctly cleaned up. Amongst other things the SELinux
security label would not be removed, which prevents the VM
from ever starting again.
The virDomainIsActive() check at the start of qemudShutdownVMDaemon
checks for vm->def->id not being -1. By moving the assignment of the
VM id to the start of qemudStartVMDaemon, we can ensure cleanup will
occur on failure
* src/qemu/qemu_driver.c: Move initialization of 'vm->def->id'
so that qemudShutdownVMDaemon() will process the shutdown
Compilation on mingw was warning about %lld use in fprintf, and
in the gnulib strptime module about dead labels.
* tools/virsh.c (vshPrint): Change redirect.
(vshPrintExtra): Allow use within vshPrint. Avoid fprintf on
arbitrary formats, since we aren't using gnulib module; instead,
use virVasprintf to pre-format.
(vshError): Likewise.
* .gnulib: Update to latest, for mingw strptime warning fix.
Reported by Matthias Bolte.
Introduced by commit fac97c65c distributing cfg.mk, which
previously could blindly assume it was in a git checkout.
* cfg.mk (_update_required): Also check for .git.
* autogen.sh: Don't run bootstrap from a tarball.
Reported by Daniel Veillard.
When attaching a device that already exists, xend driver updates
the device with "device_configure", it causes problems (e.g. for
disk device, 'device_configure' only can be used to update device
like CDROM), on the other hand, we provide additional API
(virDomainUpdateDevice) to update device, this fix is to raise up
errors instead of updating the existed device which is not CDROM
device.
Changes from v1 to v2:
- allow to update CDROM
* src/xen/xend_internal.c
Building the 0.8.8 release candidate on cygwin produced this compiler
warning, which is indicative of catastrophic failure on any attempt to
print an error message with errno turned to a string:
CC strerror_r.lo
strerror_r.c: In function 'rpl_strerror_r':
strerror_r.c:67: warning: assignment makes integer from pointer without a cast
This has been fixed in gnulib.
* .gnulib: Update to latest, for strerror_r fix.
* src/util/memory.c (includes): Satisfy 'make syntax-check'.
Suspending a VM which contains shell meta characters doesn't work with
libvirt-0.8.7:
/var/log/libvirt/qemu/andreas_231-ne\ doch\ nicht.log:
sh: -c: line 0: syntax error near unexpected token `doch'
sh: -c: line 0: `cat | { dd bs=4096 seek=1 if=/dev/null && dd bs=1048576; }
Although target="andreas_231-ne doch nicht" contains shell meta
characters (here: blanks), they are not properly escaped by
src/qemu/qemu_monitor_{json,text}.c#qemuMonitor{JSON,Text}MigrateToFile()
First, the filename needs to be properly escaped for the shell, than
this command line has to be properly escaped for qemu again.
For this to work, remove the old qemuMonitorEscapeArg() wrapper, rename
qemuMonitorEscape() to it removing the handling for shell=TRUE, and
implement a new qemuMonitorEscapeShell() returning strings using single
quotes.
Using double quotes or escaping special shell characters with backslashes
would also be possible, but the set of special characters heavily
depends on the concrete shell (dsh, bash, zsh) and its setting (history
expansion, interactive use, ...)
Signed-off-by: Philipp Hahn <hahn@univention.de>
The logging functions are enhanced so that immediately prior to
the first log message being printed to any output channel, the
libvirt package version will be printed.
eg
$ LIBVIRT_DEBUG=1 virsh
18:13:28.013: 17536: info : libvirt version: 0.8.7
18:13:28.013: 17536: debug : virInitialize:361 : register drivers
...
The 'configure' script gains two new arguments which can be
used as
--with-packager="Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10"
--with-packager-version="1.fc14"
to allow distros to append a custom string with package specific
data.
The RPM specfile is modified so that it appends the RPM version,
the build host, the build date and the packager name.
eg
$ LIBVIRT_DEBUG=1 virsh
18:14:52.086: 17551: info : libvirt version: 0.8.7, package: 1.fc13 (Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10)
18:14:52.086: 17551: debug : virInitialize:361 : register drivers
Thus when distro packagers receive bug reports they can clearly
see what version was in use, even if the bug reporter mistakenly
or intentionally lies about version/builds
* src/util/logging.c: Output version data prior to first log message
* libvirt.spec.in: Include RPM release, date, hostname & packager
* configure.ac: Add --with-packager & --with-packager-version args
QEMUD_CMD_FLAG_PCI_MULTIBUS should be set in the function
qemuCapsExtractVersionInfo()
The flag QEMUD_CMD_FLAG_PCI_MULTIBUS is used in the function
qemuBuildDeviceAddressStr(). All callers get qemuCmdFlags
by the function qemuCapsExtractVersionInfo() except that
testCompareXMLToArgvFiles() in qemuxml2argvtest.c.
So we should set QEMUD_CMD_FLAG_PCI_MULTIBUS in the function
qemuCapsExtractVersionInfo() instead of qemuBuildCommandLine()
because the function qemuBuildCommandLine() does not be called
when we attach a pci device.
tests: set QEMUD_CMD_FLAG_PCI_MULTIBUS in testCompareXMLToArgvFiles()
set QEMUD_CMD_FLAG_PCI_MULTIBUS before calling qemuBuildCommandLine()
as the flags is not set by qemuCapsExtractVersionInfo().
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Win32 doesn't have a concept of signal masks so disable that
code. It is unclear how SIGINT is delivered (if at all) on
Win32, so this might further work to provide an alternative
to pthread_sigmask
* tools/virsh.c: Avoid pthread_sigmask on Win32
Quite a few hosts don't have cgroups mounted and so see warnings
from libvirt logged, which then cause bug reports, etc. Reduce
the log level to INFO so they're not visible by default
* src/qemu/qemu_driver.c: Reduce log level for cgroups
When run non-root the nwfilter driver logs error messages about
being unable to find iptables/ebtables commands (they are in
/sbin which isn't in $PATH). The nwfilter driver can't ever work
as non-root, so simply skip it entirely thus avoiding the error
messages
* src/conf/nwfilter_conf.h, src/nwfilter/nwfilter_driver.c,
src/nwfilter/nwfilter_gentech_driver.c,
src/nwfilter/nwfilter_gentech_driver.h: Pass 'bool privileged'
flag down to final driver impl
* src/nwfilter/nwfilter_ebiptables_driver.c: Skip initialization
if not privileged
A typo s/spice/vnc/ caused parsing of the spice 'auth' data
to write into the wrong part of the struct, blowing away
other unrelated data.
* src/conf/domain_conf.c: s/vnc/spice/ in parsing spice auth
Most of te VIR_INFO calls in the udev driver are only relevant
to developers so can switch to VIR_DEBUG. Failure to initialize
libpciaccess though is a fatal error
* src/node_device/node_device_udev.c: Adjust log levels
When probing machine types if the QEMU binary does not exist
we get a hard to diagnose error, due to the execve() in the
child failing
error: internal error Child process exited with status 1.
Add an explicit check so that we get
error: Cannot find QEMU binary /usr/libexec/qem3u-kvm: No such file or directory
* src/qemu/qemu_capabilities.c: Check for QEMU binary
To make it easier to investigate problems with async event
delivery, add two more debugging lines
* daemon/remote.c: Debug when an event is queued for dispatch
* src/remote/remote_driver.c: Debug when an event is received
for processing
When built as modules, the connection drivers live
in $LIBDIR/libvirt/drivers. Now we add lock manager
drivers, we need to distinguish. So move the existing
modules to 'connection-driver'
* src/Makefile.am: Move module install dir
* src/driver.c: Move module search dir
Some functionality run in virExec hooks may do I/O which
can trigger SIGPIPE. Renable SIGPIPE blocking around the
hook function
* src/util/util.c: Block SIGPIPE around hooks
The Linux kernel headers don't have a value for SCSI type 12,
but HAL source code shows this to be a 'raid'. Add workaround
for this type. Lower log level for unknown types since
this is not a fatal error condition. Include the device sysfs
path in the log output to allow identification of which device
has problems.
* src/node_device/node_device_udev.c: Add SCSI RAID type
libpciaccess has many bugs in its pci_system_init/cleanup
functions that makes calling them multiple times unwise.
eg it will double close() FDs, and leak other FDs.
* src/node_device/node_device_udev.c: Only initialize
libpciaccess once
Until now, user namespaces have not done much, but (for that
reason) have been innocuous to glob in with other CLONE_
flags. Upcoming userns development, however, will make tasks
cloned with CLONE_NEWUSER far more restricted. In particular,
for some time they will be unable to access files with anything
other than the world access perms.
This patch assumes that noone really needs the user namespaces
to be enabled. If that is wrong, then we can try a more
baroque patch where we create a file owned by a test userid with
700 perms and, if we can't access it after setuid'ing to that
userid, then return 0. Otherwise, assume we are using an
older, 'harmless' user namespace implementation.
Comments appreciated. Is it ok to do this?
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
The new virConnectGetSysinfo() API allows one to get the system
information associated to a connection host, providing the same
data as a guest that uses <os><smbios mode='host'/></os>, and in
a format that can be pasted into the guest and edited when using
<os><smbios mode='sysinfo'/></os>.
* include/libvirt/libvirt.h.in (virConnectGetSysinfo): Declare.
* src/libvirt_public.syms: Export new symbol.
qemu 0.13.0 (at least as built for Fedora 14, and also backported to
RHEL 6.0 qemu) supported an older syntax for a spicevmc channel; it's
not as flexible (it has an implicit name and hides the chardev
aspect), but now that we support spicevmc, we might as well target
both variants.
* src/qemu/qemu_capabilities.h (QEMUD_CMD_FLAG_DEVICE_SPICEVMC):
New flag.
* src/qemu/qemu_capabilities.c (qemuCapsParseDeviceStr): Set it
correctly.
* src/qemu/qemu_command.h (qemuBuildVirtioSerialPortDevStr): Drop
declaration.
* src/qemu/qemu_command.c (qemuBuildVirtioSerialPortDevStr): Alter
signature, check flag.
(qemuBuildCommandLine): Adjust caller and check flag.
* tests/qemuhelptest.c (mymain): Update test.
* tests/qemuxml2argvtest.c (mymain): New test.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc-old.xml:
New file.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc-old.args:
Likewise.
Adds <smartcard mode='passthrough' type='spicevmc'/>, which uses the
new <channel name='smartcard'/> of <graphics type='spice'>.
* docs/schemas/domain.rng: Support new XML.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (virDomainGraphicsSpiceChannelName): New
enum value.
(virDomainChrSpicevmcName): New enum.
(virDomainChrSourceDef): Distinguish spicevmc types.
* src/conf/domain_conf.c (virDomainGraphicsSpiceChannelName): Add
smartcard.
(virDomainSmartcardDefParseXML): Parse it.
(virDomainChrDefParseXML, virDomainSmartcardDefParseXML): Set
spicevmc name.
(virDomainChrSpicevmc): New enum conversion functions.
* src/libvirt_private.syms: Export new functions.
* src/qemu/qemu_command.c (qemuBuildChrChardevStr): Conditionalize
name.
* tests/qemuxml2argvtest.c (domain): New test.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-spicevmc.args:
New file.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-spicevmc.xml:
Likewise.
Inspired by https://bugzilla.redhat.com/show_bug.cgi?id=615757
Add a new character device backend for virtio serial channels that
activates the QEMU spice agent on the main channel using the vdagent
spicevmc connection. The <target> must be type='virtio', and supports
an optional name that specifies how the guest will see the channel
(for now, name must be com.redhat.spice.0).
<channel type='spicevmc'>
<target type='virtio'/>
<address type='virtio-serial' controller='1' bus='0' port='3'/>
</channel>
* docs/schemas/domain.rng: Support new XML.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (virDomainChrType): New enum value.
* src/conf/domain_conf.c (virDomainChr): Add spicevmc.
(virDomainChrDefParseXML, virDomainChrSourceDefParseXML)
(virDomainChrDefParseTargetXML): Parse and enforce proper use.
(virDomainChrSourceDefFormat, virDomainChrDefFormat): Format.
* src/qemu/qemu_command.c (qemuBuildChrChardevStr)
(qemuBuildCommandLine): Add qemu support.
* tests/qemuxml2argvtest.c (domain): New test.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc.xml: New
file.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc.args:
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Qemu smartcard/spicevmc support exists on branches (such as
http://cgit.freedesktop.org/~alon/qemu/commit/?h=usb_ccid.v15&id=024a37b)
but is not yet upstream. The added -help output matches a scratch build
that will be close to the RHEL 6.1 qemu-kvm.
* src/qemu/qemu_capabilities.h (QEMUD_CMD_FLAG_CCID_EMULATED)
(QEMUD_CMD_FLAG_CCID_PASSTHRU, QEMUD_CMD_FLAG_CHARDEV_SPICEVMC):
New flags.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags)
(qemuCapsParseDeviceStr): Check for smartcard capabilities.
(qemuCapsExtractVersionInfo): Tweak comment.
* tests/qemuhelptest.c (mymain): New test.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61-device: Likewise.
* src/conf/domain_conf.h (virDomainSmartcardType): New enum.
(virDomainSmartcardDef, virDomainDeviceCcidAddress): New structs.
(virDomainDef): Include smartcards.
(virDomainSmartcardDefIterator): New typedef.
(virDomainSmartcardDefFree, virDomainSmartcardDefForeach): New
prototypes.
(virDomainControllerType, virDomainDeviceAddressType): Add ccid
enum values.
(virDomainDeviceInfo): Add ccid address type.
* src/conf/domain_conf.c (virDomainSmartcard): Convert between
enum and string.
(virDomainSmartcardDefParseXML, virDomainSmartcardDefFormat)
(virDomainSmartcardDefFree, virDomainDeviceCcidAddressParseXML)
(virDomainDefMaybeAddSmartcardController): New functions.
(virDomainDefParseXML): Parse the new XML.
(virDomainDefFormat): Convert back to XML.
(virDomainDefFree): Clean up.
(virDomainDeviceInfoIterate): Iterate over passthrough aliases.
(virDomainController, virDomainDeviceAddress)
(virDomainDeviceInfoParseXML, virDomainDeviceInfoFormat)
(virDomainDefAddImplicitControllers): Support new values.
* src/libvirt_private.syms (domain_conf.h): New exports.
* cfg.mk (useless_free_options): List new function.
Assuming a hypervisor that supports multiple smartcard devices in the
guest, this would be a valid XML description:
<devices>
<smartcard mode='host'/>
<smartcard mode='host-certificates'>
<certificate>/path/to/cert1</certificate>
<certificate>/path/to/cert2</certificate>
<certificate>/path/to/cert3</certificate>
</smartcard>
<smartcard mode='passthrough' type='tcp'>
<source mode='bind' host='127.0.0.1' service='2001'/>
<protocol type='raw'/>
</smartcard>
</devices>
(As of this commit, the qemu hypervisor will be the first
implementation, but it only supports one smartcard.)
* docs/formatdomain.html.in (Smartcard devices): New section.
* docs/schemas/domain.rng (smartcard): New define, used in
devices.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host.xml: New file
to test schema.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host-certificates.xml:
Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-tcp.xml:
Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-controller.xml:
Likewise.
Currently users who want to use virDomainQemuMonitorCommand() API or
it's virsh equivalent has to use the same protocol as libvirt uses for
communication to qemu. Since the protocol is QMP with current qemu and
HMP much more usable for humans, one ends up typing something like the
following:
virsh qemu-monitor-command DOM \
'{"execute":"human-monitor-command","arguments":{"command-line":"info kvm"}}'
which is not a very convenient way of debugging qemu.
This patch introduces --hmp option to qemu-monitor-command, which says
that the provided command is in HMP. If libvirt uses QMP to talk with
qemu, the command will automatically be converted into QMP. So the
example above is simplified to just
virsh qemu-monitor-command --hmp DOM "info kvm"
Also the result is converted from
{"return":"kvm support: enabled\r\n"}
to just plain HMP:
kvm support: enabled
If libvirt talks to qemu in HMP, --hmp flag is obviously a noop.
This patch fixes 2 occurrences of nla_put expression with a '!' in
front of them that basically prevented the detection that the buffer
is too small. However, code further below would then detect that the
buffer is too small when further parts are added to the netlink message.
* src/qemu/qemu_driver.c (qemudShutdownVMDaemon): Check that vm is
still active.
Reported by Wen Congyang as follows:
Steps to reproduce this bug:
1. use gdb to debug libvirtd, and set breakpoint in the function
qemuConnectMonitor()
2. start a vm, and the libvirtd will be stopped in qemuConnectMonitor()
3. kill -STOP $(cat /var/run/libvirt/qemu/<domain>.pid)
4. continue to run libvirtd in gdb, and libvirtd will be blocked in the
function qemuMonitorSetCapabilities()
5. kill -9 $(cat /var/run/libvirt/qemu/<domain>.pid)
Here is log of the qemu:
=========
LC_ALL=C PATH=/sbin:/usr/sbin:/bin:/usr/bin ...
char device redirected to /dev/pts/3
2011-01-27 09:38:48.101: shutting down
2011-01-27 09:41:26.401: shutting down
=========
The vm is shut down twice. I do not know whether this behavior has
side effect, but I think we should shutdown the vm only once.
When compiling libvirt with GCC 3.4.6 the following warning is being triggered quite a lot:
util/memory.h:60: warning: declaration of 'remove' shadows a global declaration
/usr/include/stdio.h:175: warning: shadowed declaration is here
Fix this by renaming the parameter to 'toremove'.
Depending if the qemu binary supports multiple pci-busses, the device
options will contain "bus=pci" or "bus=pci.0".
Only x86_64 and i686 seem to have support for multiple PCI-busses. When
a guest of these architectures is started, set the
QEMUD_CMD_FLAG_PCI_MULTIBUS flag.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
In the SASL codepath we typically read far more data off the
wire than we immediately need. When using a connection from a
single thread this isn't a problem, since only our reply will
be pending (or an event we can handle directly). When using a
connection from multiple threads though, we may read the data
from replies from other threads. If those replies occur after
our own reply, they'll not be processed. The other thread will
then go into poll() and wait for its reply which has already
been received and decoded. The solution is to set poll() timeout
to 0 if there is pending SASL data.
* src/remote/remote_driver.c: Don't sleep in poll() if SASL
data exists
Command line building for incoming tunneled migration is missed,
as a result, all the tunneled migration will fail with "unknown
migration protocol".
* src/qemu/qemu_command.c
This patch teaches testutil how to read multi-line input files with
backspace-newline line continuation markers.
The patch also breaks up all the single-line arguments test input files into
multi-line files with lines shorter than 80 characters.
commit f1fe9671e was supposed to make sure we use files.h
macros to avoid double close, but it didn't work.
Meanwhile, virCommand is vastly superior to system(), fork(),
and popen() (also to virExec, but we haven't completed that
conversion), so enforce that, too.
* cfg.mk (sc_prohibit_close): Fix typo that excluded close, and
add pclose.
(sc_prohibit_fork_wrappers): New rule, for fork, system, and popen.
* .x-sc_prohibit_close: More exemptions.
* .x-sc_prohibit_fork_wrappers: New file.
* Makefile.am (syntax_check_exceptions): Ship new file.
* src/datatypes.c (virReleaseConnect): Tweak comment to avoid
false positive.
* src/util/files.h (VIR_CLOSE): Likewise.
* src/fdstream.c (virFDStreamOpenFile, virFDStreamCreateFile):
Use VIR_FORCE_CLOSE instead of close.
* tests/commandtest.c (mymain): Likewise.
* tools/virsh.c (editFile): Use virCommand instead of system.
* src/util/util.c (__virExec): Special case preservation of std
file descriptors to child.
Use it in all places where a memory or storage request size is converted
to a larger granularity. This avoids requesting too small memory or storage
sizes that could result from the truncation done by a simple division.
This extends the round up fix in 6002e0406c
to the whole codebase.
Instead of reporting errors for odd values in the VMX code round them up.
Update the QEMU Argv tests accordingly as the original memory size 219200
isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change
it to 219100 and 219136. Use two different values intentionally to make
sure that rounding up works.
Update virsh.pod accordingly, as rounding down and rejecting are replaced
by rounding up.
Fixes test failure that was overlooked after commit 1e1f7a8950.
* daemon/Makefile.am (check-local): Let 'make check' fail on error.
* daemon/test_libvirtd.aug: Move qemu-specific option...
* src/qemu/test_libvirtd_qemu.aug: ...into correct test.
* src/qemu/libvirtd_qemu.aug: Parse new option.
qemu allows the user to choose what io storage api should be used,
either the default (threads) or native (linux aio) which in the latter
case can result in better performance.
Based on a patch originally by Matthias Dahl.
Red Hat Bugzilla #591703
Signed-off-by: Eric Blake <eblake@redhat.com>
The refactoring of QEMU command startup was comitted with
a couple of VIR_WARN lines left in from debugging.
* src/qemu/qemu_driver.c: Remove log warning lines
When qemuMonitorSetCapabilities() fails, there is no need to
call qemuMonitorClose(), because the caller will already see
the error code and tear down the entire VM. The extra call to
qemuMonitorClose resulted in a double-free due to it removing
a ref count prematurely.
* src/qemu/qemu_driver.c: Remove premature close of monitor
If the event loop takes a very long time todo something, it is
possible for the 'self pipe' buffer to become full at which
point the entire event loop + remote driver deadlock. Use a
boolean flag to ensure we have strict one-in, one-out behaviour
on writes/reads of the 'self pipe'
Regression in commit caa805ea let a lot of bad messages slip in.
* cfg.mk (msg_gen_function): Fix function name.
* src/qemu/qemu_cgroup.c (qemuRemoveCgroup): Fix fallout from
'make syntax-check'.
* src/qemu/qemu_driver.c (qemudDomainGetInfo)
(qemuDomainWaitForMigrationComplete, qemudStartVMDaemon)
(qemudDomainSaveFlag, qemudDomainAttachDevice)
(qemuDomainUpdateDeviceFlags): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachHostUsbDevice)
(qemuDomainDetachPciDiskDevice, qemuDomainDetachSCSIDiskDevice):
Likewise.
When attaching device from a xml file and the device is mis-configured,
virsh gives mis-leading message "out of memory". This patch fixes this.
Signed-off-by: Eric Blake <eblake@redhat.com>
If the memory of guest OS is changed constantly, the live migration
can not be ended ever for ever.
We can use the command 'virsh migrate-setmaxdowntime' to control the
live migration. But the value of maxdowntime is diffcult to calculate
because it depends on the transfer speed of network and constantly
changing memroy size. We need a easy way to control the live migration.
This patch adds the support of forcing guest to suspend at timeout.
With this patch, when we migrate the guest OS, we can specify a
timeout. If the live migration timeouts, auto-suspend the guest OS,
where the migration will complete offline.
While migration is in progress and virsh is waiting for its
completion, user may want to terminate the progress by pressing
Ctrl-C. But virsh just exits on user's Ctrl-C leaving migration
in background that user isn't even aware of. It's not reasonable.
This patch changes the behaviour for migration. For other
commands Ctrl-C still terminates virsh itself.
* src/qemu/qemu_command.c (qemuBuildChrChardevStr): Alter the
chardev alias.
(qemuBuildCommandLine): Output an id for the chardev counterpart.
* tests/qemuxml2argvdata/*: Update tests to match.
Reported by Daniel P. Berrange.
Steps to reproduce this bug:
1. service libvirtd start
2. virsh start <domain>
3. kill -STOP $(cat /var/run/libvirt/qemu/<domain>.pid)
4. service libvirtd restart
5. kill -9 $(cat /var/run/libvirt/qemu/<domain>.pid)
Then libvirtd will core dump or be in deadlock state.
Make sure that json is built into libvirt and the version
of qemu is newer than 0.13.0.
The reason of libvirtd cores dump is that:
We add vm->refs when we alloc the memory, and decrease it
in the function qemuHandleMonitorEOF() in other thread.
We add vm->refs in the function qemuConnectMonitor() and
decrease it when the vm is inactive.
The libvirtd will block in the function qemuMonitorSetCapabilities()
because the vm is stopped by signal SIGSTOP. Now the vm->refs is 2.
Then we kill the vm by signal SIGKILL. The function
qemuMonitorSetCapabilities() failed, and then we will decrease vm->refs
in the function qemuMonitorClose().
In another thread, mon->fd is broken and the function
qemuHandleMonitorEOF() is called.
If qemuHandleMonitorEOF() decreases vm->refs before qemuConnectMonitor()
returns, vm->refs will be decrease to 0 and the memory is freed.
We will call qemudShutdownVMDaemon() as qemuConnectMonitor() failed.
The memory has been freed, so qemudShutdownVMDaemon() is too dangerous.
We will reference NULL pointer in the function virDomainConfVMNWFilterTeardown():
=============
void
virDomainConfVMNWFilterTeardown(virDomainObjPtr vm) {
int i;
if (nwfilterDriver != NULL) {
for (i = 0; i < vm->def->nnets; i++)
virDomainConfNWFilterTeardown(vm->def->nets[i]);
}
}
============
vm->def->nnets is not 0 but vm->def->nets is NULL(We don't set vm->def->nnets
to 0 when we free vm).
We should add an extra reference of vm to avoid vm to be deleted if
qemuConnectMonitor() failed.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
As noticed by Eric, commit 8e28c5d402,
which fixed generation of virtio-serial port numbers, forgot to adjust
test files which resulted in make check failure.
Regression introduced in commit e6b68d7 (Nov 2010).
Prior to that point, handlesAlloc was always a multiple of
EVENT_ALLOC_EXTENT (10), and was an int (so even if the subtraction
had been able to wrap, a negative value would be less than the count
not try to free the handles array). But after that point,
VIR_RESIZE_N made handlesAlloc grow geometrically (with a pattern of
10, 20, 30, 45 for the handles array) but still freed in multiples of
EVENT_ALLOC_EXTENT; and the count changed to size_t. Which means that
after 31 handles have been created, then 30 handles destroyed,
handlesAlloc is 5 while handlesCount is 1, and since (size_t)(1 - 5)
is indeed greater than 1, this then tried to free 10 elements, which
had the awful effect of nuking the handles array while there were
still live handles.
Nuking live handles puts libvirtd in an inconsistent state, and was
easily reproducible by starting and then stopping 60 faqemu guests.
* daemon/event.c (virEventCleanupTimeouts, virEventCleanupHandles):
Avoid integer wrap-around causing us to delete the entire array
while entries are still active.
* tests/eventtest.c (mymain): Expose the bug.
This new parameter allows user specifies where the client
cerficate, client key, CA certificate of x509 is, instead of
hardcoding it. If 'pkipath' is not specified, and the user
is not root, try to find files in $HOME/.pki/libvirt, as long
as one of client cerficate, client key, CA certificate can
not be found, use default global location (LIBVIRT_CACERT,
LIBVIRT_CLIENTCERT, LIBVIRT_CLIENTKEY, see
src/remote/remote_driver.h)
Example of use:
[root@Osier client]# virsh -c qemu+tls://10.66.93.111/system?pkipath=/tmp/pki/client
error: Cannot access CA certificate '/tmp/pki/client/cacert.pem': No such file
or directory
error: failed to connect to the hypervisor
[root@Osier client]# ls -l
total 24
-rwxrwxr-x. 1 root root 6424 Jan 24 21:35 a.out
-rw-r--r--. 1 root root 1245 Jan 23 19:04 clientcert.pem
-rw-r--r--. 1 root root 132 Jan 23 19:04 client.info
-rw-r--r--. 1 root root 1679 Jan 23 19:04 clientkey.pem
[root@Osier client]# cp /tmp/cacert.pem .
[root@Osier client]# virsh -c qemu+tls://10.66.93.111/system?pkipath=/tmp/pki/client
Welcome to virsh, the virtualization interactive terminal.
Type: 'help' for help with commands
'quit' to quit
virsh #
* src/remote/remote_driver.c: adds support for the new pkipath URI parameter
If vol->capacity is odd, the capacity will be rounded down
by devision, this patch is to round it up instead of rounding
down, to be safer in case of one writes to the volume with the
size he used to create.
- src/storage/storage_backend_logical.c: make sure size is not rounded down
If a guest image is saved in compressed format, and the restore fails
in some way after the intermediate process used to uncompress the
image has been started, but before qemu has been started to hook up to
the uncompressor, libvirt will endlessly wait for the uncompressor to
finish, but it never will because it's still waiting to have something
hooked up to drain its output.
The solution is to close the pipes on both sides of the uncompressor,
then send a SIGTERM before calling waitpid on it (only if the restore
has failed, of course).
On x86_64 hosts, /usr/lib64 must be used instead of /usr/lib
Rather than attempt to whitelist architectures, just check
for existance of /usr/lib64
* autogen.sh: Fix to use /usr/lib64 if it exists
Add a hook to the error reporting APIs to allow specific
error messages to be filtered out. Wire up libvirtd to
remove VIR_ERR_NO_DOMAIN & similar error codes from the
logs. They are still logged at DEBUG level.
* daemon/libvirtd.c: Filter VIR_ERR_NO_DOMAIN and friends
* src/libvirt_private.syms, src/util/virterror.c,
src/util/virterror_internal.h: Hook for changing error
reporting level
This reverts the additions in commit
abff683f78
taking us back to state where all errors are fully logged
in both libvirtd and normal clients.
THe intent was to stop VIR_ERR_NO_DOMAIN (No such domain
with UUID XXXX) messages from client apps polluting syslog
The change affected all error codes, but more seriously,
it also impacted errors from internal libvirtd infrastructure
For example guest autostart no longer logged errors. The
libvirtd network code no longer logged some errors. This
makes debugging incredibly hard
* daemon/libvirtd.c: Remove error log priority filter
* src/util/virterror.c, src/util/virterror_internal.h: Remove
callback for overriding log priority
This patch is a partial resolution to the following bug:
https://bugzilla.redhat.com/show_bug.cgi?id=667756
(to complete the fix, an updated selinux-policy package is required,
to add the policy that allows libvirt to set the context of a fifo,
which was previously not allowed).
Explanation : When an incoming migration is over a pipe (for example,
if the image was compressed and is being fed through gzip, or was on a
root-squash nfs server, so needed to be opened by a child process
running as a different uid), qemu cannot read it unless the selinux
context label for the pipe has been set properly.
The solution is to check the fd used as the source of the migration
just before passing it to qemu; if it's a fifo (implying that it's a
pipe), we call the newly added virSecurityManagerSetFDLabel() function
to set the context properly.
A need was found to set the SELinux context label on an open fd (a
pipe, as a matter of fact). This patch adds a function to the security
driver API that will set the label on an open fd to secdef.label. For
all drivers other than the SELinux driver, it's a NOP. For the SElinux
driver, it calls fsetfilecon().
If the return is a failure, it only returns error up to the caller if
1) the desired label is different from the existing label, 2) the
destination fd is of a type that supports setting the selinux context,
and 3) selinux is in enforcing mode. Otherwise it will return
success. This follows the pattern of the existing function
SELinuxSetFilecon().
The problem was introduced by commit 4303c91, which removed the checking
of domain state, this patch is to fix it.
Otherwise, improper error will be thrown, e.g.
error: Failed to save domain rhel6 state
error: cannot resolve symlink /var/lib/libvirt/qemu/save/rhel6.save: No such
file or directory
Running 'make check' can sometimes fail in the gnulib/tests
subdirectory, when doing an incremental build, because
./bootstrap generates a Makefile.am that tries to refer to
../../.. instead of ../.., and gets lost.
This may be an upstream gnulib bug, where a more elegant
solution will present itself in the future:
http://thread.gmane.org/gmane.comp.lib.gnulib.bugs/24898
But in the meantime, I was able to reproduce both the issue,
and this solution to work around it.
* bootstrap.conf (bootstrap_epilogue): Ensure that no stray
../../.. components remain in gnulib/tests/Makefile.in.
Reported by Serge Hallyn.
In QEMU, the card itself is a PCI device, but it requires a codec
(either -device hda-output or -device hda-duplex) to actually output
sound. Specifying <sound model='ich6'/> gives us -device intel-hda
-device hda-duplex I think it's important that a simple <sound model='ich6'/>
sets up a useful codec, to have consistent behavior with all other sound cards.
This is basically Dan's proposal of
<sound model='ich6'>
<codec type='output' slot='0'/>
<codec type='duplex' slot='3'/>
</sound>
without the codec bits implemented.
The important thing is to keep a consistent API here, we don't want some
<sound> devs require tweaking codecs but not others. Steps I see to
accomplishing this:
- every <sound> device has a <codec type='default'/> (unless codecs are
manually specified)
- <codec type='none'/> is required to specify 'no codecs'
- new audio settings like mic=on|off could then be exposed in
<sound> or <codec> in a consistent manner for all sound models
v2:
Use model='ich6'
v3:
Use feature detection, from eblake
Set codec id, bus, and cad values
v4:
intel-hda isn't supported if -device isn't available
v5:
Comment spelling fixes
This bug has been present since before the time that commit
f8a519 (Dec 2008) tried to make the dispatch loop re-entrant.
Dereferencing eventLoop.handles outside the lock risks crashing, since
any other thread could have reallocated the array in the meantime.
It's a narrow race window, however, and one that would have most
likely resulted in passing bogus data to the callback rather than
actually causing a segv, which is probably why it has gone undetected
this long.
* daemon/event.c (virEventDispatchHandles): Cache data while
inside the lock, as the array might be reallocated once outside.
If vnc_auto_unix_socket is enabled, any VNC devices without a hardcoded
listen or socket value will be setup to serve over a unix socket in
/var/lib/libvirt/qemu/$vmname.vnc.
We store the generated socket path in the transient VM definition at
CLI build time.
QEMU supports serving VNC over a unix domain socket rather than traditional
TCP host/port. This is specified with:
<graphics type='vnc' socket='/foo/bar/baz'/>
This provides better security access control than VNC listening on
127.0.0.1, but will cause issues with tools that rely on the lax security
(virt-manager in fedora runs as regular user by default, and wouldn't be
able to access a socket owned by 'qemu' or 'root').
Also not currently supported by any clients, though I have patches for
virt-manager, and virt-viewer should be simple to update.
v2:
schema: Make listen vs. socket a <choice>
This will allow us to record transient runtime state in vm->def, like
default VNC parameters. Accomplish this by adding an extra 'live' parameter
to SetDefTransient, with similar semantics to the 'live' flag for
AssignDef.
https://bugzilla.redhat.com/show_bug.cgi?id=562743
Also, fixes gnulib bug in dealing with strerror_r from glibc 2.13.
* .gnulib: Update to latest, for improved bootstrap.
* bootstrap: Resync from gnulib.
* autogen.sh (bootstrap): Add --bootstrap-sync, to make it easier
to keep bootstrap up-to-date. Pass optional --no-git through.
Reported by Aleksey Avdeev.
When restoring a saved qemu instance via JSON monitor, the vm is
left in a paused state. Turns out the 'cont' cmd was failing with
"MigrationExpected" error class and "An incoming migration is
expected before this command can be executed" error description
due to migration (restore) not yet complete.
Detect if 'cont' cmd fails with "MigrationExpecte" error class and
retry 'cont' cmd.
V2: Fix potential double-free noted by Laine Stump
Report VIR_ERR_CONFIG_UNSUPPORTED instead of VIR_ERR_INTERNAL_ERROR,
as it's valid in our domain schema, just unsupported by hypervisor
here.
* src/qemu/qemu_command.c
The code which set VNC passwords correctly had fallback for
the set_password command, but was lacking it for the
expire_password command. This made it impossible to start
a guest. It also failed to check whether QEMU was still
running after the initial 'set_password' command completed
* src/qemu/qemu_hotplug.c: Fix error handling when
password expiry fails
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Fix
return code for missing expire_password command
Avoid overwriting the real error message with a generic
OOM failure message, when machine type probe fails
* src/qemu/qemu_driver.c: Don't overwrite error
If the XML security model is NULL, it is assumed that the current
model will be used with dynamic labelling. The verify step is
meaningless and potentially crashes if dereferencing NULL
* src/security/security_manager.c: Skip NULL model on verify
The function virUnrefConnect() may call virReleaseConnect() to release
the dest connection, and the function virReleaseConnect() will call
conn->driver->close().
So the function virUnrefConnect() should be surrounded by
qemuDomainObjEnterRemoteWithDriver() and
qemuDomainObjExitRemoteWithDriver() to prevent possible deadlock between
two communicating libvirt daemons.
See commit f0c8e1cb37 for further details.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
In some circumstances, libvirtd would issue two STOPPED events after it
stopped a domain. This was because an EOF event can arrive after a qemu
process is killed but before qemuMonitorClose() is called.
qemuHandleMonitorEOF() should ignore EOF when the domain is not running.
I wasn't able to reproduce this bug directly, only after adding an
artificial sleep() into qemudShutdownVMDaemon().
A large number of return values used 'return (0)' instead
of simply 'return 0'. Remove all these redundant brackets
so the style is consistent throughout the file
* src/libvirt.c: Remove redundant brackets
The driver table only has 10 slots, but there are potentially
11 drivers that need activating. Improve the error message
when driver registration fails
* src/libvirt.c: Increase driver table size & improve errors
The virLibConnError() function (and related ones) do not correctly
report line number info. Turn them all into macros so line numbers
are reported correctly. Drop the connection object in all of them
since it is no longer used.
Also from the virLibConnWarning() equivalents completely. Now
that the Xen driver is running 100% inside libvirtd, those
codepaths for secondary drivers cannot be reached.
* src/libvirt.c: Replace error functions with macros
* .gnulib: Update to latest, for sigpipe and sigaction modules.
* bootstrap.conf (gnulib_modules): Add siaction, sigpipe, strerror_r.
* tools/virsh.c (vshSetupSignals) [!SIGPIPE]: Delete, now that
gnulib guarantees it.
(SA_SIGINFO): Define for mingw fallback.
* src/util/virterror.c (virStrerror): Simplify, now that gnulib
guarantees the POSIX interface.
* configure.ac (AC_CHECK_FUNCS_ONCE): Drop redundant check.
(AM_PROG_CC_STDC): Move earlier, to keep autoconf happy.
The public object is called NWFilter but the corresponding private
object is called NWFilterPool. I don't see compelling reasons for this
Pool suffix. One might argue that an NWFilter is a "pool" of rules, etc.
Remove the Pool suffix from NWFilterPool. No functional change included.
Fixes regression introduced in commit 2211518, where all qemu 0.12.x
fails to start, as does qemu 0.13.x lacking the pci-assign device.
Prior to 2211518, the code was just ignoring a non-zero exit status
from the qemu child, but the virCommand code checked this to avoid
masking any other issues, which means the real bug of provoking
non-zero exit status has been latent for a longer time.
* src/qemu/qemu_capabilities.c (qemuCapsExtractVersionInfo): Check
for -device driver,? support.
(qemuCapsExtractDeviceStr): Avoid failure if all probed devices
are unsupported.
Reported by Ken Congyang.
https://bugzilla.redhat.com/show_bug.cgi?id=620363
When using -incoming stdio or -incoming exec:, qemu keeps the
stdin fd open long after the migration is complete. Not to
mention that exec:cat is horribly inefficient, by doubling the
I/O and going through a popen interface in qemu.
The new -incoming fd: of qemu 0.12.0 closes the fd after using
it, and allows us to bypass an intermediary cat process for
less I/O.
* src/qemu/qemu_command.h (qemuBuildCommandLine): Add parameter.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Support
migration via fd: when possible. Consolidate migration handling
into one spot, now that it is more complex.
* src/qemu/qemu_driver.c (qemudStartVMDaemon): Update caller.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.args: New file.
* tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.xml: Likewise.
Currently, boot order can be specified per device class but there is no
way to specify exact disk/NIC device to boot from.
This patch adds <boot order='N'/> element which can be used inside
<disk/> and <interface/>. This is incompatible with the older os/boot
element. Since not all hypervisors support per-device boot
specification, new deviceboot flag is included in capabilities XML for
hypervisors which understand the new boot element. Presence of the flag
allows (but doesn't require) users to use the new style boot order
specification.
* tools/libvirt-guests.init.in: Rename...
* tools/libvirt-guests.init.sh: ...so that xgettext's language
detection via suffix will work.
* po/POTFILES.in: Update all references.
* tools/Makefile.am (EXTRA_DIST, libvirt-guests.init): Likewise.
* tools/libvirt-guests.init.sh: Use only POSIX shell features, which
includes using gettext.sh for translation rather than $"".
* tools/Makefile.am (libvirt-guests.init): Supply a few more substitutions.
* po/POTFILES.in: Mark that libvirt-guests.init needs translation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Before the security driver was refactored in d6623003 seclabeltest and
secaatest were basically the same. seclabeltest was meant for SELinux
and secaatest for AppArmor. Both tests exited early when the specific
security driver backend wasn't enabled.
With the new security manager trying to initialize a disabled security
driver backend is an error that can't be distinguished from other errors
anymore. Therefore, the updated seclabeltest just asks for the first
available backend as this will always work even with SELinux and AppArmor
backend being disabled due to the new Nop backend.
Remove the obsolete secaatest and compile and run the seclabeltest
unconditional.
This fixes make check on systems that support AppArmor.
Display or set unlimited values for memory parameters. Unlimited is
represented by INT64_MAX in memory cgroup.
Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
Reported-by: Justin Clift <jclift@redhat.com>
* .gnulib: Update, for sc_prohibit_strcmp fix.
* cfg.mk: Adjust copyright; the only FSF portions come from when
this file was copied from coreutils.
(sc_prohibit_strncmp): Copy bug-fixes from sc_prohibit_strcmp.
* .x-sc_prohibit_strcmp: Delete, now that rule is smarter.
* .x-sc_prohibit_strncmp: Likewise.
* Makefile.am (syntax_check_exceptions): Track deletion.
virLibConnError already includes __FUNCTION__ in its output, so we
were redundant. Furthermore, clang warns that __FUNCTION__ is not
a string literal (at least __FUNCTION__ will never contain %, so
it was not a security risk).
* src/datatypes.c: Replace __FUNCTION__ with a descriptive string.
This is in response to a request in:
https://bugzilla.redhat.com/show_bug.cgi?id=665293
In short, under heavy load, it's possible for qemu's networking to
lock up due to the tap device's default 1MB sndbuf being
inadequate. adding "sndbuf=0" to the qemu commandline -netdevice
option will alleviate this problem (sndbuf=0 actually sets it to
0xffffffff).
Because we must be able to explicitly specify "0" as a value, the
standard practice of "0 means not specified" won't work here. Instead,
virDomainNetDef also has a sndbuf_specified, which defaults to 0, but
is set to 1 if some value was given.
The sndbuf value is put inside a <tune> element of each <interface> in
the domain. The intent is that further tunable settings will also be
placed inside this element.
<interface type='network'>
...
<tune>
<sndbuf>0</sndbuf>
...
</tune>
</interface>
This patch is in response to
https://bugzilla.redhat.com/show_bug.cgi?id=643050
The existing libvirt support for the vhost-net backend to the virtio
network driver happens automatically - if the vhost-net device is
available, it is always enabled, otherwise the standard userland
virtio backend is used.
This patch makes it possible to force whether or not vhost-net is used
with a bit of XML. Adding a <driver> element to the interface XML, eg:
<interface type="network">
<model type="virtio"/>
<driver name="vhost"/>
will force use of vhost-net (if it's not available, the domain will
fail to start). if driver name="qemu", vhost-net will not be used even
if it is available.
If there is no <driver name='xxx'/> in the config, libvirt will revert
to the pre-existing automatic behavior - use vhost-net if it's
available, and userland backend if vhost-net isn't available.
We try to use that command first when setting a VNC/SPICE password. If
that doesn't work we fallback to the legacy VNC only password
Allow an expiry time to be set, if that doesn't work, throw an error
if they try to use SPICE.
Change since v1:
- moved qemuInitGraphicsPasswords to qemu_hotplug, renamed
to qemuDomainChangeGraphicsPasswords.
- updated what looks like a typo (that appears to work anyway) in
initial patch from Daniel:
- ret = qemuInitGraphicsPasswords(driver, vm,
- VIR_DOMAIN_GRAPHICS_TYPE_SPICE,
- &vm->def->graphics[0]->data.vnc.auth,
- driver->vncPassword);
+ ret = qemuInitGraphicsPasswords(driver, vm,
+ VIR_DOMAIN_GRAPHICS_TYPE_SPICE,
+ &vm->def->graphics[0]->data.spice.auth,
+ driver->spicePassword);
Based on patch by Daniel P. Berrange <berrange@redhat.com>.
I broke 'make check' with commit 04197350 by unconditionally
emitting 'hap=' in xen xm driver. Only emit 'hap=' if
xendConfigVersion >= 3. I've tested sending 'hap=' to a Xen 3.2
machine without support for hap setting and verified that xend
silently drops the unrecognized setting.
* src/qemu/qemu_capabilities.h (qemuCapsParseDeviceStr): New
prototype.
* src/qemu/qemu_capabilities.c (qemuCapsParsePCIDeviceStrs)
Rename and split...
(qemuCapsExtractDeviceStr, qemuCapsParseDeviceStr): ...to make it
easier to add and test device-specific checks.
(qemuCapsExtractVersionInfo): Update caller.
* tests/qemuhelptest.c (testHelpStrParsing): Also test parsing of
device-related flags.
(mymain): Update expected flags.
* tests/qemuhelpdata/qemu-0.12.1-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.3-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.13.0-device: New file.
It was awkward having only int conversion in the virStrToLong family,
but only long conversion in the virXPath family. Make both families
support both types.
* src/util/util.h (virStrToLong_l, virStrToLong_ul): New
prototypes.
* src/util/xml.h (virXPathInt, virXPathUInt): Likewise.
* src/util/util.c (virStrToLong_l, virStrToLong_ul): New
functions.
* src/util/xml.c (virXPathInt, virXPathUInt): Likewise.
* src/libvirt_private.syms (util.h, xml.h): Export them.
* src/qemu/qemu_capabilities.c (qemuCapsProbeMachineTypes)
(qemuCapsProbeCPUModels, qemuCapsParsePCIDeviceStrs)
(qemuCapsExtractVersionInfo): Use virCommand rather than virExec.
xen-unstable c/s 16931 introduced a per-domain setting for hvm
guests to enable/disable hardware assisted paging. If disabled,
software techniques such as shadow page tables are used. If enabled,
and the feature exists in underlying hardware, hardware support for
paging is used.
Xen does not provide a mechanism to discover the HAP capability, so
we advertise its availability for hvm guests on Xen >= 3.3.
xen-unstable c/s 16931 introduced a per-domain setting for hvm
guests to enable/disable hardware assisted paging. If disabled,
software techniques such as shadow page tables are used. If enabled,
and the feature exists in underlying hardware, hardware support for
paging is used.
This provides implementation for mapping HAP setting to/from
domxml/native formats in xen drivers.
Extend the virDomainFeature enumeration to include HAP (hardware
assisted paging) feature.
Hardware features such as Extended Page Table and Nested Page
Table augment hypervisor software techniques such as shadow
page table. Adding HAP to the virDomainFeature enumeration
allows users to select between hardware and software memory
management mechanisms for their guests.
Commit 870dba0 (Mar 2008) added builddir/src to PATH to pick
up virsh. Later, virsh was moved to tools; commit db68d6b
(Oct 2009) noticed this, but only added the new location rather
than deleting the old location.
* tests/Makefile.am (path_add): Drop now-useless directory.
Suggested by Daniel P. Berrange.
Without this patch, at least tests/daemon-conf (which sticks
$builddir/src in the PATH) tries to execute the directory
$builddir/src/qemu rather than a real qemu binary.
* src/util/util.h (virFileExists): Adjust prototype.
(virFileIsExecutable): New prototype.
* src/util/util.c (virFindFileInPath): Reject non-executables and
directories. Avoid huge stack allocation.
(virFileExists): Use lighter-weight syscall.
(virFileIsExecutable): New function.
* src/libvirt_private.syms (util.h): Export new function.
When we do peer2peer migration, the dest uri is an address of the
target host as seen from the source machine. So we must specify
the ip or hostname of target host in dest uri. If we do not specify
it, report an error to the user.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
If the emulator doesn't support SDL graphic, we should reject
the use of SDL graphic xml with error messages, but not ignore
it silently, and pretend things are fine.
"-sdl" flag was exposed explicitly by qemu since 0.10.0, more detail:
http://www.redhat.com/archives/libvir-list/2011-January/msg00442.html
And we already have capability flag "QEMUD_CMD_FLAG_0_10", which
could be used to prevent the patch affecting the older versions
of QEMU.
* src/qemu/qemu_command.c
Don't report an error when the VirtualBox registry key is missing,
as this just indicates that VirtualBox is not installed in general.
This matches the behavior of the XPCOM glue that silently ignores
a missing VBoxXPCOMC.so.
Skip IB700 when assigning PCI slots.
Note: the I6300ESB watchdog _is_ a PCI device.
To test this: I applied this patch to libvirt-0.8.3-2.fc14 (rebasing
it slightly: qemu_command.c didn't exist in that version) and
installed this on my machine, then tested that I could successfully
add an ib700 watchdog device to a guest, start the guest, and the
ib700 was available to the guest. I also added an i6300esb (PCI)
watchdog to another guest, and verified that libvirt assigned a PCI
device to it, that the guest could be started, and that i6300esb was
present in the guest.
Note that if you previously had a domain with a ib700 watchdog, it
would have had an <address type='pci' .../> clause added to it in the
libvirt configuration. This patch does not attempt to remove this.
You cannot start such a domain -- qemu gives an error if you try.
With this patch you are able to remove the bogus address element
without libvirt adding it back.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
* src/util/network.c (virSocketAddrMask): Zero out port, so that
iptables can initialize just the netmask then call
virSocketFormatAddr without an uninitialized read in getnameinfo.
On Fedore 14, virt-manager spews a bunch of warnings to the console:
/usr/lib64/python2.7/site-packages/libvirt.py:1781: PendingDeprecationWarning: The CObject type is marked Pending Deprecation in Python 2.7. Please use capsule objects instead.
Have libvirt use the capsule API if available. I've verified this compiles
fine on older python (2.6 in RHEL6 which doesn't have capsules), and
virt-manager seems to function fine.
After the remote driver runs an event callback, it unconditionally disables the
loop timer, thinking it just flushed every queued event. This doesn't work
correctly though if an event is queued while a callback is running.
The events actually aren't being lost, it's just that the event loop didn't
think there was anything that needed to be dispatched. So all those 'lost
events' should actually get re-triggered if you manually kick the loop by
generating a new event (like creating a new guest).
The solution is to disable the dispatch timer _before_ we invoke any event
callbacks. Events queued while a callback is running will properly reenable the
timer.
More info at https://bugzilla.redhat.com/show_bug.cgi?id=624252
The current security driver usage requires horrible code like
if (driver->securityDriver &&
driver->securityDriver->domainSetSecurityHostdevLabel &&
driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver,
vm, hostdev) < 0)
This pair of checks for NULL clutters up the code, making the driver
calls 2 lines longer than they really need to be. The goal of the
patchset is to change the calling convention to simply
if (virSecurityManagerSetHostdevLabel(driver->securityDriver,
vm, hostdev) < 0)
The first check for 'driver->securityDriver' being NULL is removed
by introducing a 'no op' security driver that will always be present
if no real driver is enabled. This guarentees driver->securityDriver
!= NULL.
The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel'
being non-NULL is hidden in a new abstraction called virSecurityManager.
This separates the driver callbacks, from main internal API. The addition
of a virSecurityManager object, that is separate from the virSecurityDriver
struct also allows for security drivers to carry state / configuration
information directly. Thus the DAC/Stack drivers from src/qemu which
used to pull config from 'struct qemud_driver' can now be moved into
the 'src/security' directory and store their config directly.
* src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to
use new virSecurityManager APIs
* src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h
src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h:
Move into src/security directory
* src/security/security_stack.c, src/security/security_stack.h,
src/security/security_dac.c, src/security/security_dac.h: Generic
versions of previous QEMU specific drivers
* src/security/security_apparmor.c, src/security/security_apparmor.h,
src/security/security_driver.c, src/security/security_driver.h,
src/security/security_selinux.c, src/security/security_selinux.h:
Update to take virSecurityManagerPtr object as the first param
in all callbacks
* src/security/security_nop.c, src/security/security_nop.h: Stub
implementation of all security driver APIs.
* src/security/security_manager.h, src/security/security_manager.c:
New internal API for invoking security drivers
* src/libvirt.c: Add missing debug for security APIs
If invalid type is specified, e.g.
<serial type='foo'>
<target port='0'/>
</serial>
We replace 'foo' with "null" type implicitly, without reporting an
error message to tell the user, and "start" or "edit" the domain
will be success.
It's not good to guess what the user wants, This patch is to fix
the problem.
* src/conf/domain_conf.c
Setting unix_sock_group to something else than default "root" in
/etc/libvirt/libvirtd.conf prevents system libvirtd from dumping core on
crash. This is because we used setgid(unix_sock_group) before binding to
/var/run/libvirt/libvirt-sock* and setgid() back to original group.
However, if a process changes its effective or filesystem group ID, it
will be forbidden from leaving core dumps unless fs.suid_dumpable sysctl
is set to something else then 0 (and it is 0 by default).
Changing socket's group ownership after bind works better. And we can do
so without introducing a race condition since we loosen access rights by
changing the group from root to something else.
This avoids throwing the tests off if LD_LIBRARY_PATH or LD_PRELOAD or
other variables are set.
Signed-off-by: Diego Elio Pettenò <flameeyes@gmail.com>
Add VM name/UUID in log for domain related APIs.
Format: "dom=%p, (VM: name=%s, uuid=%s), param0=%s, param1=%s
*src/libvirt.c (introduce two macros: VIR_DOMAIN_DEBUG, and
VIR_DOMAIN_DEBUG0)
I added a host definition to a network definition:
<network>
<name>Lokal</name>
<uuid>2074f379-b82c-423f-9ada-305d8088daaa</uuid>
<bridge name='virbr1' stp='on' delay='0' />
<ip address='192.168.180.1' netmask='255.255.255.0'>
<dhcp>
<range start='192.168.180.128' end='192.168.180.254' />
<host mac='23:74:00:03:42:02' name='somevm' ip='192.168.180.10' />
</dhcp>
</ip>
</network>
But due to the wrong if-statement the argument --dhcp-hostsfile doesn't get
added to the dnsmasq command. The patch below fixes it for me.
When dynamic_ownership=0, saved images must be owned by the same uid
as is used to run the qemu process, otherwise restore won't work. To
accomplish this, qemuSecurityDACRestoreSavedStateLabel() needs to
simply return when it's called.
This fix is in response to:
https://bugzilla.redhat.com/show_bug.cgi?id=661720
* docs/hacking.html.in (Curly braces): Tighten recommendations to
disallow if (cond) one-line; else { block; }.
* HACKING: Regenerate.
Suggested by Daniel P. Berrange.
Although the upper-layer code protected against it, it was possible to
call iptablesForwardMasquerade() with an IPv6 address and have it
attempt to add a rule to the MASQUERADE chain of ip6tables (which
doesn't exist).
This patch changes that function to check the protocol of the given
address, generate an error log if it's not IPv4 (AF_INET), and finally
hardcodes all the family parameters sent down to lower-level functions.
This is partially in response to
https://bugzilla.redhat.com/show_bug.cgi?id=653300
The crash in that report was coincidentally fixed when we switched
from using inet_pton() to using virSocketParseAddr(), but the absence
of an ip address in a dhcp static host definition was still silently
ignored (and that entry discarded from the saved XML). This patch
turns that into a logged failure; likewise if the entry has neither a
mac address nor a name attribute (the entry is useless without at
least one of those, plus an ip address).
Since the network name is now pulled into this function in order for
those error logs to be more informative, the other error messages in
the function have also been changed to take advantage.
While doing some testing with Qemu and creating huge logfiles I encountered the case where the VM could not start anymore due to the lseek() to the end of the Qemu VM's log file failing. The patch below fixes the problem by replacing the previously used 'int' with 'off_t'.
To reproduce this error, you could do the following:
dd if=/dev/zero of=/var/log/libvirt/qemu/<name of VM>.log bs=1024 count=$((1024*2048))
and you should get an error like this:
error: Failed to start domain <name of VM>
error: Unable to seek to -2147482651 in /var/log/libvirt/qemu/<name of VM>.log: Success
Detected on cygwin:
util/util.c: In function 'virSetUIDGID':
util/util.c:2824: warning: format '%d' expects type 'int', but argument 7 has type 'gid_t' [-Wformat]
(and three other lines)
* src/util/util.c (virSetUIDGID): Cast, as is done elsewhere in
this file, to avoid printf type mismatch warnings.
The udev driver does not update a PCI device with its SR-IOV capabilities,
when applicable, the way the hal driver does. As a result, dumping the
device's XML will not include the relevant physical or virtual function
information.
With this patch, the XML is correct:
# virsh nodedev-dumpxml pci_0000_09_00_0
<device>
<name>pci_0000_09_00_0</name>
<parent>pci_0000_00_1c_0</parent>
<driver>
<name>vxge</name>
</driver>
<capability type='pci'>
<domain>0</domain>
<bus>9</bus>
<slot>0</slot>
<function>0</function>
<product id='0x5833'>X3100 Series 10 Gigabit Ethernet PCIe</product>
<vendor id='0x17d5'>Neterion Inc.</vendor>
<capability type='virt_functions'>
<address domain='0x0000' bus='0x0a' slot='0x00' function='0x1'/>
<address domain='0x0000' bus='0x0a' slot='0x00' function='0x2'/>
<address domain='0x0000' bus='0x0a' slot='0x00' function='0x3'/>
</capability>
</capability>
</device>
# virsh nodedev-dumpxml pci_0000_0a_00_1
<device>
<name>pci_0000_0a_00_1</name>
<parent>pci_0000_00_1c_0</parent>
<driver>
<name>vxge</name>
</driver>
<capability type='pci'>
<domain>0</domain>
<bus>10</bus>
<slot>0</slot>
<function>1</function>
<product id='0x5833'>X3100 Series 10 Gigabit Ethernet PCIe</product>
<vendor id='0x17d5'>Neterion Inc.</vendor>
<capability type='phys_function'>
<address domain='0x0000' bus='0x09' slot='0x00' function='0x0'/>
</capability>
</capability>
</device>
Cc: Dave Allan <dallan@redhat.com>
Signed-off-by: Chris Wright <chrisw@redhat.com>
As pointed out in https://bugzilla.redhat.com/show_bug.cgi?id=659855#c9,
commit c3568ec2 introduced a regression where we no longer close any
fd's beyond FD_SETSIZE.
* src/util/util.c (__virExec): Continue to close fd's beyond
keepfd range.
Reported by Stefan Praszalowicz.
The original version of these functions would modify the address sent
in, meaning that the caller would usually need to copy the address
first. This change makes the original a const, and puts the resulting
masked address into a new arg (which could point to the same
virSocketAddr as the original, if the caller really wants to modify
it).
This also makes the API consistent with virSocketAddrBroadcast[ByPrefix].
Previously we used ioctl() to set the IP address and netmask of the
bridges used for virtual networks, and apparently the SIOCSIFNETMASK
ioctl implicitly set the broadcast address for the interface. The new
method of using the "ip" command requires broadcast address to be
explicitly specified though.
These functions work only for IPv4, becasue IPv6 doesn't have the same
concept of "broadcast address" as IPv4. They merely OR the inverse of
the netmask with the given host address, thus turning on all the host
bits.
Add vboxArrayGetWithUintArg to handle new signature variations. Also
refactor vboxArrayGet* implementation to use a common helper function.
Deal with the incompatible changes in the VirtualBox 4.0 API. This
includes major changes in virtual machine and storage medium lookup,
in RDP server property handling, in session/lock handling and other
minor areas.
VirtualBox 4.0 also dropped the old event API and replaced it with a
completely new one. This is not fixed yet and will be addressed in
another patch. Therefore, currently the domain events are supported
for VirtualBox 3.x only.
Based on initial work from Jean-Baptiste Rouault.
On Windows IID's are represented as GUID by value, instead of nsID
by reference on non-Windows platforms.
Patch the vbox_CAPI_v2_2.h header to deal with this difference.
Rewrite vboxIID abstraction that deals with the different IID
representations. Add support for the GUID representation. Also unify
the four context dependent free functions for vboxIIDs
vboxIIDUnalloc, vboxIIDFree, vboxIIDUtf8Free, vboxIIDUtf16Free
into vboxIIDUnalloc that is now safe to be called (even multiple
times) on a vboxIID independent of the source and context of the
vboxIID.
The new vboxIID is designed to be used as a stack allocated variable.
It has a value member that represents the actual IID value.
When I build libvirt without libvirtd, I receive some errors:
cp: cannot stat `/home/wency/rpmbuild/BUILDROOT/libvirt-0.8.6-1.el6.x86_64/etc/libvirt/qemu/networks/default.xml': No such file or directory
My build step:
# ./autogen.sh --without-libvirtd
# make dist
# rpmbuild --nodeps --define "_sourcedir `pwd`" --define "_without_libvirtd 1" -ba libvirt.spec
The reason is we disable network when we do not build libvirt daemon in configure.ac.
After fixing this bug, I build libvirt without libvirtd, I receive other errors:
RPM build errors:
Installed (but unpackaged) file(s) found:
/usr/share/doc/libvirt-0.8.6/html/32favicon.png
/usr/share/doc/libvirt-0.8.6/html/api.html
..
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
A number of the libvirt APIs require the use of cgroups. This is not
enabled by default on a RHEL6 install. After discussion with cgroups
team, it was decided that upon installation of the libvirt RPM, we
should automatically turn on the cgroups service. This will activate a
default configuration that turns on all cgroups controllers libvirt
requires for full operation.
This patch fixes https://bugzilla.redhat.com/show_bug.cgi?id=664406
If qemu is run as a different uid, it has been unable to access mode
0660 files that are owned by a different user, but with a group that
the qemu is a member of (aside from the one group listed in the passwd
file), because initgroups() is not being called prior to the
exec. initgroups will change the group membership of the process (and
its children) to match the new uid.
To make this happen, the setregid()/setreuid() code in
qemuSecurityDACSetProcessLabel has been replaced with a call to
virSetUIDGID(), which does both of those, plus calls initgroups.
Similar, but not identical, code in qemudOpenAsUID() has been replaced
with virSetUIDGID(). This not only consolidates the functionality to a
single location, but also potentially fixes some as-yet unreported
bugs.
virSetUIDGID() sets both the real and effective group and user of the
process, and additionally calls initgroups() to assure that the
process joins all the auxiliary groups that the given uid is a member
of.
There are cases when we want log an error message, and possibly free
some memory as part of the cleanup, while still preserving errno for a
caller, but the functions that log errors, and virFree (VIR_FREE) make
system calls that will clear errno. This patch preserves errno during
those most basic functions (corresponding to virReportSystemError(),
virReportOOMError(), networkReportError(), etc, as well as
virStrError()). It does *not preserve errno across calls to higher
level items such as virDispatchError(), as it's assumed the caller is
all finished with any need for errno by the time it dispatches the
error.
Running an instance of the router advertisement daemon (radvd) allows
guests using the virtual network to automatically acquire an IPv6
address and default route. Note that acquiring an address only works
for networks with a prefix length of exactly 64 - radvd is still run
in other circumstances, and still advertises routes, but autoconf will
not work because it requires exactly 64 bits of address info from the
network prefix.
This patch avoids a race condition with the pidfile by manually
daemonizing radvd rather than allowing it to daemonize itself, then
creating our own pidfile (in addition to radvd's own file, which is
unnecessary, but there is no way to tell radvd to not create it). This
is accomplished by exec'ing it with "--debug 1" in the commandline,
and using virCommand's features to fork, create a pidfile, and detach
from the newly forked process.
At this point everything is already in place to make IPv6 happen, we just
need to add a few rules, remove some checks for IPv4-only, and document
the changes to the XML on the website.
All of the iptables functions eventually call down to a single
bottom-level function, and fortunately, ip6tables syntax (for all the
args that we use) is identical to iptables format (except the
addresses), so all we need to do is:
1) Get an address family down to the lowest level function in each
case, either implied through an address, or explicitly when no
address is in the parameter list, and
2) At the lowest level, just decide whether to call "iptables" or
"ip6tables" based on the family.
The location of the ip6tables binary is determined at build time by
autoconf. If a particular target system happens to not have ip6tables
installed, any attempts to run it will generate an error, but that
won't happen unless someone tries to define an IPv6 address for a
network. This is identical behavior to IPv4 addresses and iptables.
This patch reorganizes the code in bridge_driver.c to account for the
concept of a single network with multiple IP addresses, without adding
in the extra variable of IPv6. A small bit of code has been
temporarily added that checks all given addresses to verify they are
IPv4 - this will be removed when full IPv6 support is turned on.
This commit adds support for IPv6 parsing and formatting to the
virtual network XML parser, including moving around data definitions
to allow for multiple <ip> elements on a single network, but only
changes the consumers of this API to accommodate for the changes in
API/structure, not to add any actual IPv6 functionality. That will
come in a later patch - this patch attempts to maintain the same final
functionality in both drivers that use the network XML parser - vbox
and "bridge" (the Linux bridge-based driver used by the qemu
hypervisor driver).
* src/libvirt_private.syms: Add new private API functions.
* src/conf/network_conf.[ch]: Change C data structure and
parsing/formatting.
* src/network/bridge_driver.c: Update to use new parser/formatter.
* src/vbox/vbox_tmpl.c: update to use new parser/formatter
* docs/schemas/network.rng: changes to the schema -
* there can now be more than one <ip> element.
* ip address is now an ip-addr (ipv4 or ipv6) rather than ipv4-addr
* new optional "prefix" attribute that can be used in place of "netmask"
* new optional "family" attribute - "ipv4" or "ipv6"
(will default to ipv4)
* define data types for the above
* tests/networkxml2xml(in|out)/nat-network.xml: add multiple <ip> elements
(including IPv6) to a single network definition to verify they are being
correctly parsed and formatted.
In practice this has always been optional, but the RNG has shown it as
mandatory, and since all the examples for make check had it, it was
never noticed. One of the existing test cases has been changed to
check for this.
I also noticed that the dhcp/host/ip was still defined as <text/>,
but should really be <ref name='ipv4-addr'/>
brSetInetAddress can only set a single IP address on the bridge, and
uses a method (ioctl(SIOCSETIFADDR)) that only works for IPv4. Replace
it and brSetInetNetmask with a single function that uses the external
"ip addr add" command to add an address/prefix to the interface - this
supports IPv6, and allows adding multiple addresses to the interface.
Although it isn't currently used in the code, we also add a
brDelInetAddress for completeness' sake.
Also, while we're modifying bridge.c, we change brSetForwardDelay and
brSetEnableSTP to use the new virCommand API rather than the
deprecated virRun, and also log an error message in bridge_driver.c if
either of those fail (previously the failure would be completely
silent).
When a netmask isn't specified for an IPv4 address, one can be implied
based on what network class range the address is in. The
virNetworkDefPrefix function does this for us, so netmask isn't
required.
IPv6 will use prefix exclusively, and IPv4 will also optionally be
able to use it, and the iptables functions really need a prefix
anyway, so use the new virNetworkDefPrefix() function to send prefixes
into iptables functions instead of netmasks.
Also, in a couple places where a netmask is actually needed, use the
new private API function for it rather than getting it directly. This
will allow for cases where no netmask or prefix is specified (it
returns the default for the current class of network.)
Some functions in this file were returning 1 on success and 0 on
failure, and others were returning 0 on success and -1 on
failure. Switch them all to return the libvirt-preferred 0/-1.
The functions in iptables.c all return -1 on failure, but all their
callers (which all happen to be in bridge_driver.c) assume that they
are returning an errno, and the logging is done accordingly. This
patch fixes all the error checking and logging to assume < 0 is an
error, and nothing else.
Later patches will add the possibility to define a network's netmask
as a prefix (0-32, or 0-128 in the case of IPv6). To make it easier to
deal with definition of both kinds (prefix or netmask), add two new
functions:
virNetworkDefNetmask: return a copy of the netmask into a
virSocketAddr. If no netmask was specified in the XML, create a
default netmask based on the network class of the virNetworkDef's IP
address.
virNetworkDefPrefix: return the netmask as numeric prefix (or the
default prefix for the network class of the virNetworkDef's IP
address, if no netmask was specified in the XML)
virSocketPrefixToNetmask: Given a 'prefix', which is the number of 1
bits in a netmask, fill in a virSocketAddr object with a netmask as an
IP address (IPv6 or IPv4).
virSocketAddrMask: Mask off the host bits in one virSocketAddr
according to the netmask in another virSocketAddr.
virSocketAddrMaskByPrefix, Mask off the host bits in a virSocketAddr
according to a prefix (number of 1 bits in netmask).
VIR_SOCKET_FAMILY: return the family of a virSocketAddr
Shorten qemuDomainSnapshotWriteSnapshotMetadata function name
and make it take a snapshot pointer instead of dealing with
the current snapshot. Update other functions accordingly.
Add a qemuDomainSnapshotReparentChildren hash iterator to
reparent the children of a snapshot that is being deleted. Use
qemuDomainSnapshotWriteMetadata to write updated metadata
to disk.
This fixes a problem where outdated parent information breaks
the snapshot tree and hinders the deletion of child snapshots.
Reported by Philipp Hahn.
I began noticing a race when reserving VNC ports as described here
https://www.redhat.com/archives/libvir-list/2010-November/msg00379.html
Turns out that we were not initializing the size field of bitmap
struct when allocating the bitmap. This subsequently caused
virBitmapSetBit() to fail since bitmap->size is 0, hence we never
actually reserved the port.
Fix glitch in commit cddd2a06 (thankfully post-0.8.6, so no
released version has the glitch).
Document and try to workaround glitch in commit 46e9b0f (in 0.8.0),
which invalidated 6 virErrorNumber values dating as far back as 0.7.1.
My audit did not find any other glitches until pre-0.1.0 days. I'm
not sure how to add a syntax-check off the top of my head, but
hopefully the explicit numbering will make people think twice about
renumbering in the future.
* include/libvirt/virterror.h (virErrorDomain): Avoid inserting
new values in the middle, and add explicit numbering to help avoid
this in the future.
(virErrorNumber): Add explicit numbering, and document the snafu.
* src/remote/remote_driver.c (remoteIO): Compensate for the snafu.
This fixes the build from a tarball and makes autobuild.sh
work again.
This should actually have been part of this earlier commit:
esx: Move VMX handling code out of the driver directory
42b2f35d36
Reported by Eric Blake.
All other drivers are explicitly linked to gnulib. The VMware
driver lacked this, resulting in mdir_name being an undefine
symbol.
Explicitly link the VMware driver to gnulib to fix this.
Now the VMware driver doesn't depend on the ESX driver anymore.
Add a WITH_VMX option that depends on WITH_ESX and WITH_VMWARE.
Also add a libvirt_vmx.syms file.
Move some escaping functions from esx_util.c to vmx.c.
Adapt the test suite, ESX and VMware driver to the new code layout.
Connecting to a ESX(i) server that is part of a cluster failed
when the connection also involved a vCenter.
Accept ClusterComputeResource type in addition to ComputeResource
type in the object lookup function.
Reported by Guillaume Le Louët.
If there is a dangling symbolic link in filesystem pool, the pool
will fail to start or refresh, this patch is to fix it by ignoring
it with a warning log.
Network disks are accessed by qemu directly, and have no
associated file on the host, so checking for file ownership etc.
is unnecessary.
Signed-off-by: Josh Durgin <joshd@hq.newdream.net>
* configure.ac (dlopen): Cygwin dlopen is in libc; avoid spurious
failure.
(XDR_CFLAGS): Define when needed.
* src/Makefile.am (libvirt_driver_remote_la_CFLAGS): Use it.
When running 'make check' under a multi-cpu Dom0 xen machine,
nodeinfotest had a spurious failure it was reading from
/sys/devices/system/cpu, but xen has no notion of topology. The test
was intended to be isolated from reading any real system files; the
regression was introduced in Mar 2010 with commit aa2f6f96dd.
Fix things by allowing an early exit for the testsuite.
* src/nodeinfo.c (linuxNodeInfoCPUPopulate): Add parameter.
(nodeGetInfo): Adjust caller.
* tests/nodeinfotest.c (linuxTestCompareFiles): Likewise.
I got some spurious failures when commandhelper won the race and
ran to the point of parent detection prior to the intermediate
daemonizing process getting a chance to exit. This fixes it.
* tests/commandhelper.c (main): Checking for re-parenting to
init(1) is racy; instead check that we belong to a new session.
* configure.ac (with_selinux): Check for <selinux/label.h>.
* src/security/security_selinux.c (getContext): New function.
(SELinuxRestoreSecurityFileLabel): Use it to restore compilation
when using older libselinux.
Autoconf 2.59 doesn't define ${localedir}, so libvirt was failing
to compile due to a missing LOCALEDIR until today's configmake fix.
* .gnulib: Update to latest for configmake fix.
* configure.ac (libpcap): Avoid AS_CASE.
While not technically a double free (since VIR_FREE NULLs the
pointer), this is unnecessary extra code.
This crept in when the function was converted from virRun to virCommand.
The AUTHORS file has also been updated.
formatnetwork.html has a menu item at level 3. libvirt.css
doesn't have a explicit rule for level 3 and level 3 and
level 2 items end up at the same indentation level.
Add an additional 1em indentation to level 3 menu items.
XPCOM returns an array as a pointer to an array of pointers to the
actual items. When the array isn't needed anymore the items are
released, but the actual array containing the pointers to the items
was not freed and leaked.
Free the actual array using ComUnallocMem.
This doesn't affect MSCOM as SafeArrayDestroy releases all items
and frees the array.
Don't require dlopen, but link to ole32 and oleaut32 on Windows.
Don't expose g_pVBoxFuncs anymore. It was only used to get the
version of the API. Make VBoxCGlueInit return the version instead.
This simplifies the implementation of the MSCOM glue layer.
Get the VirtualBox version from the registry.
Add a dummy implementation of the nsIEventQueue to the MSCOM glue
as there seems to be no direct equivalent with MSCOM. It might be
implemented using the normal window message loop. This requires
additional investigation.
The QEMU driver file is far too large. Move all the hotplug
helper code out into a separate file. No functional change.
* src/qemu/qemu_hotplug.c, src/qemu/qemu_hotplug.h,
src/Makefile.am: Add hotplug helper file
* src/qemu/qemu_driver.c: Delete hotplug code
To allow the APIs to be used from separate files, move the domain
lock / job helper code into qemu_domain.c
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add domain lock
/ job code
* src/qemu/qemu_driver.c: Remove domain lock / job code
To allow their use from other source files, move qemuDriverLock
and qemuDriverUnlock to qemu_conf.h and make them non-static
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add qemuDriverLock
qemuDriverUnlock
* src/qemu/qemu_driver.c: Remove qemuDriverLock and qemuDriverUnlock
The QEMU driver file is far too large. Move all the hostdev
helper code out into a separate file. No functional change.
* src/qemu/qemu_hostdev.c, src/qemu/qemu_hostdev.h,
src/Makefile.am: Add hostdev helper file
* src/qemu/qemu_driver.c: Delete hostdev code
The QEMU driver file is far too large. Move all the cgroup
helper code out into a separate file. No functional change.
* src/qemu/qemu_cgroup.c, src/qemu/qemu_cgroup.h,
src/Makefile.am: Add cgroup helper file
* src/qemu/qemu_driver.c: Delete cgroup code
The QEMU driver file is far too large. Move all the audit
helper code out into a separate file. No functional change.
* src/qemu/qemu_audit.c, src/qemu/qemu_audit.h,
src/Makefile.am: Add audit helper file
* src/qemu/qemu_driver.c: Delete audit code
Move the code for handling the QEMU virDomainObjPtr private
data, and custom XML namespace into a separate file
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: New file
for private data & namespace code
* src/qemu/qemu_driver.c, src/qemu/qemu_driver.h: Remove
private data & namespace code
* src/qemu/qemu_driver.h, src/qemu/qemu_command.h: Update
includes
* src/Makefile.am: Add src/qemu/qemu_domain.c
The qemu_conf.c code is doing three jobs, driver config file
loading, QEMU capabilities management and QEMU command line
management. Move the command line code into its own file
* src/qemu/qemu_command.c, src/qemu/qemu_command.h: New
command line management code
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Delete command
line code
* src/qemu/qemu_conf.h, src/qemu_conf.c: Adapt for API renames
* src/Makefile.am: add src/qemu/qemu_command.c
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Add
import of qemu_command.h
The qemu_conf.c code is doing three jobs, driver config file
loading, QEMU capabilities management and QEMU command line
management. Move the capabilities code into its own file
* src/qemu/qemu_capabilities.c, src/qemu/qemu_capabilities.h: New
capabilities management code
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Delete capabilities
code
* src/qemu/qemu_conf.h: Adapt for API renames
* src/Makefile.am: add src/qemu/qemu_capabilities.c
So far, CPUID data were stored in two different data structures. First
of them was a structure allowing direct access for CPUID data according
to function number and the second was a plain array of struct
cpuX86cpuid. This was a silly design which resulted in converting data
from one type to the other and back again or implementing similar
functionality for both data structures.
The patch leaves only the direct access structure. This makes the code
both smaller and more maintainable since operations on different objects
can use common low-level operations.
All 57 tests for cpu subsystem still pass after this rewrite.
* tests/qemuhelpdata/qemu-kvm-0.13.0: New file.
* tests/qemuhelptest.c (mymain): New test from Fedora 14 qemu-kvm,
which covers some options (like -fstype passthrough) not tested elsewhere.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60: New file.
* tests/qemuhelptest.c (mymain): New test from RHEL 6.0 qemu-kvm,
which covers some options (like -vga=qxl) not tested elsewhere.
* .x-sc_prohibit_empty_lines_at_EOF: Exempt qemu help output.
Allows compilation, but no creation of child processes yet. Take it
one step at a time.
* src/util/util.c (virExecWithHook) [WIN32]: New dummy function.
* src/libvirt_private.syms: Export it.
* .gnulib: Update to latest.
* bootstrap.conf (gnulib_modules): Import pipe-posix and waitpid
for mingw.
* src/remote/remote_driver.c (pipe) [WIN32]: Drop dead macro.
* daemon/event.c (pipe) [WIN32]: Drop dead function.
Without this fix, ./configure --with-libpcap will cause --with-libpcap=yes
to be implicitly passed down, which cause yes/bin/pcap-config to be
searched for rather than /usr/bin/pcap-config.
Also output pcap: no when pcap is not found or disabled.
Currently, all of domain "save/dump/managed save/migration"
use the same function "qemudDomainWaitForMigrationComplete"
to wait the job finished, but the error messages are all
about "migration", e.g. when a domain saving job is canceled
by user, "migration was cancled by client" will be throwed as
an error message, which will be confused for user.
As a solution, intoduce two new job types(QEMU_JOB_SAVE,
QEMU_JOB_DUMP), and set "priv->jobActive" to "QEMU_JOB_SAVE"
before saving, to "QEMU_JOB_DUMP" before dumping, so that we
could get the real job type in
"qemudDomainWaitForMigrationComplete", and give more clear
message further.
And as It's not important to figure out what's the exact job
is in the DEBUG and WARN log, also we don't need translated
string in logs, simply repace "migration" with "job" in some
statements.
* src/qemu/qemu_driver.c
The "Default-Stop" field in LSB comment in libvirt-guests is missing and should
be added. I also suggests to add runlevel 2 to the "Default-Start" field.
--
Laurent Léonard
Current code does not pass VM mac address to a 802.1Qbh direct attach
interface using IFLA_VF_MAC. This patch adds support in macvtap code to
send IFLA_VF_MAC netlink request during port profile association on a
802.1Qbh interface.
Stefan Cc'ed for comments because this patch changes a condition for
802.1Qbg
802.1Qbh support for IFLA_VF_MAC in enic driver has been posted and is
pending acceptance at http://marc.info/?l=linux-netdev&m=129185244410557&w=2
This is pretty straightforward - even though dnsmasq gets daemonized
and uses a pid file, those things are both handled by the dnsmasq
binary itself. And libvirt doesn't need any of the output of the
dnsmasq command either, so we just setup the args and call
virRun(). Mainly it was just a (mostly) mechanical job of replacing
the APPEND_ARG() macro (and some other *printfs()) with
virCommandAddArg*().
Instead of just reporting that a task failed get the
localized message from the TaskInfo error and include
it in the reported error message.
Implement minimal deserialization support for the
MethodFault type in order to obtain the actual fault
type.
For example, this changes the reported error message
when trying to create a volume with zero size from
Could not create volume
to
Could not create volume: InvalidArgument - A specified parameter was not correct.
Not perfect yet, but better than before.
The xml watchdog dump option is converted to qemu watchdog pause arg
but it is not reasonable to convert it back from qemu watchdog pause
arg since there already is a xml watchdog pause option, so a test for
the dump option to convert it from arg to xml is not added.
Changes common to all network disks:
-Make source name optional in the domain schema, since NBD doesn't use it
-Add a hostName type to the domain schema, and use it instead of genericName, which doesn't include .
-Don't leak host names or ports
-Set the source protocol in qemuParseCommandline
Signed-off-by: Josh Durgin <joshd@hq.newdream.net>
This patch adds network disk support to libvirt/QEMU. The currently
supported protocols are nbd, rbd, and sheepdog. The XML syntax is like
this:
<disk type="network" device="disk">
<driver name="qemu" type="raw" />
<source protocol='rbd|sheepdog|nbd' name="...some image identifier...">
<host name="mon1.example.org" port="6000">
<host name="mon2.example.org" port="6000">
<host name="mon3.example.org" port="6000">
</source>
<target dev="vda" bus="virtio" />
</disk>
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
`dump' watchdog action lets libvirtd to dump the guest when receives a
watchdog event (which probably means a guest crash)
Currently only qemu is supported.
When we get an EOF event on monitor connection, it may be a result of
either crash or graceful shutdown. QEMU which supports async events
(i.e., we are talking to it using JSON monitor) emits SHUTDOWN event on
graceful shutdown. In case we don't get this event by the time monitor
connection is closed, we assume the associated domain crashed.
Currently libvirt doesn't confirm whether the guest has responded to the
disk removal request. In some cases this can leave the guest with
continued access to the device while the mgmt layer believes that it has
been removed. With a recent qemu monitor command[1] we can
deterministically revoke a guests access to the disk (on the QEMU side)
to ensure no futher access is permitted.
This patch adds support for the drive_del() command and introduces it
in the disk removal paths. If the guest is running in a QEMU without this
command we currently explicitly check for unknown command/CommandNotFound
and log the issue.
If QEMU supports the command we issue the drive_del command after we attempt
to remove the device. The guest may respond and remove the block device
before we get to attempt to call drive_del. In that case, we explicitly check
for 'Device not found' from the monitor indicating that the target drive
was auto-deleted upon guest responds to the device removal notification.
1. http://thread.gmane.org/gmane.comp.emulators.qemu/84745
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Currently libvirt doesn't confirm whether the guest has responded to the
disk removal request. In some cases this can leave the guest with
continued access to the device while the mgmt layer believes that it has
been removed. With a recent qemu monitor command[1] we can
deterministically revoke a guests access to the disk (on the QEMU side)
to ensure no futher access is permitted.
This patch adds support for the drive_unplug() command and introduces it
in the disk removal paths. There is some discussion to be had about how
to handle the case where the guest is running in a QEMU without this
command (and the fact that we currently don't have a way of detecting
what monitor commands are available).
Changes since v2:
- use VIR_ERROR to report when unplug command not found
Changes since v1:
- return > 0 when command isn't present, < 0 on command failure
- detect when drive_unplug command isn't present and log error
instead of failing entire command
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
- qemudDomainAttachPciControllerDevice: Don't build "devstr"
if "-device" of qemu is not available, as "devstr" will only
be used by "qemuMonitorAddDevice", which depends on "-device"
argument of qemu is supported.
- "qemudDomainSaveImageOpen": Fix indent problem.
* src/qemu/qemu_driver.c
Commit febc591683 introduced -vga none in
case no video card is included in domain XML. However, old qemu
versions do not support this and such domain cannot be successfully
started.
This fixes a misleading error message saying the libnl package
needs to be installed, when it's really the libnl-devel package
needing to be installed.
* .gnulib: Update to latest, for at least a stdint.h fix
* src/storage/storage_driver.c (storageVolumeZeroSparseFile)
(storageWipeExtent): Use better type, although it still triggers
spurious -Wformat warning on MacOS's gcc.
popen must be matched with pclose (not fclose), or it will leak
resources. Furthermore, it is a lousy interface when it comes to
signal handling. We're much better off using our decent command
wrapper. Note that virCommand guarantees that VIR_FREE(outbuf) is
both required and safe to call, whether virCommandRun succeeded or
failed.
* src/openvz/openvz_conf.c (openvzLoadDomains, openvzGetVEID):
Replace popen with virCommand usage.
Guarantee that outbuf/errbuf are allocated on success, even if to the
empty string. Caller always has to free the result, and empty output
check requires checking if *outbuf=='\0'. Makes the API easier to use
safely. Failure is best effort allocation (some paths, like
out-of-memory, cannot allocate a buffer, but most do), so caller must
free buffer on failure.
* docs/internals/command.html.in: Update documentation.
* src/util/command.c (virCommandSetOutputBuffer)
(virCommandSetErrorBuffer, virCommandProcessIO) Guarantee empty
string on no output.
* tests/commandtest.c (test17): New test.
* docs/internals/command.html.in: Better documentation of buffer
vs. fd considerations.
* src/util/command.c (virCommandRunAsync): Reject raw execution
with string io.
(virCommandRun): Reject execution with user-specified fds not
visiting a regular file.
* src/conf/domain_conf.c (virDomainDefParseXML): Prefer sysinfo
uuid over generating one, and if both uuids are present, require
them to be identical.
* src/qemu/qemu_conf.c (qemuBuildSmbiosSystemStr): Allow skipping
the uuid.
(qemudBuildCommandLine): Adjust caller; <smbios mode=host/> must
not use host uuid in place of guest uuid.
The log lists things like -smbios type=1,vendor="Red Hat", which
is great for shell parsing, but not so great when you realize that
execve() then passes those literal "" on as part of the command
line argument, such that qemu sets SMBIOS with extra literal quotes.
The eventual addition of virCommand is needed before we have the API
to shell-quote a string representation of a command line, so that the
log can still be pasted into a shell, but without inserting extra
bytes into the execve() arguments.
* src/qemu/qemu_conf.c (qemuBuildSmbiosBiosStr)
(qemuBuildSmbiosSystemStr): Qemu doesn't like quotes around uuid
arguments, and the remaining quotes are passed literally to
smbios, making <smbios mode='host'/> inaccurate. Removing the
quotes makes the log harder to parse, but that can be fixed later
with virCommand improvements.
* tests/qemuxml2argvdata/qemuxml2argv-smbios.args: 'Fix' test; it
will need fixing again once virCommand learns how to shell-quote a
potential command line.
Humans consider January as month #1, while gmtime_r(3) calls it month #0.
While fixing it, render qemu's rtc parameter with leading zeros, as is more
commonplace.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=660194
When libvirt-guests is being stopped, I get the following message:
$Running guests on default URI: test-vm
$Suspending guests on default URI...
$Suspending test-vm: /etc/init.d/libvirt-guests: 340: Syntax error: Bad fd
number
* src/util/threads.h (virThreadID): New prototype.
* src/util/threads-pthread.c (virThreadID): New function.
* src/util/threads-win32.c (virThreadID): Likewise.
* src/libvirt_private.syms (threads.h): Export it.
* daemon/event.c (virEventInterruptLocked): Use it to avoid
warning on BSD systems.
"virCommandRun": if "cmd->outbuf" or "cmd->errbuf" is NULL,
libvirtd will be crashed when trying to start a qemu domain
(which invokes "virCommandRun"), it caused by we try to use
"*cmd->outbuf" and "*cmd->errbuf" regardless of cmd->outbuf
or cmd->errbuf is NULL.
* src/util/command.c (virCommandRun)
Two more calls to remote libvirtd have to be surrounded by
qemuDomainObjEnterRemoteWithDriver() and
qemuDomainObjExitRemoteWithDriver() to prevent possible deadlock between
two communicating libvirt daemons.
See commit f0c8e1cb37 for further details.
virDrvSupportsFeature API is allowed to return -1 on error while all but
one uses of VIR_DRV_SUPPORTS_FEATURE only check for (non)zero return
value. Let's make this macro return zero on error, which is what
everyone expects anyway.
Remove the optional option "group", as cmdHelp should accepts
only one option ("virsh help" supports both command and command
group now, and user rarely uses the options, so it doesn't matter
much for it being longer, :-)
* tools/virsh.c
This patch adds a mode_t parameter to virFileWriteStr().
If mode is different from 0, virFileWriteStr() will try
to create the file if it doesn't exist.
* src/util/util.h (virFileWriteStr): Alter signature.
* src/util/util.c (virFileWriteStr): Allow file creation.
* src/network/bridge_driver.c (networkEnableIpForwarding)
(networkDisableIPV6): Adjust clients.
* src/node_device/node_device_driver.c
(nodeDeviceVportCreateDelete): Likewise.
* src/util/cgroup.c (virCgroupSetValueStr): Likewise.
* src/util/pci.c (pciBindDeviceToStub, pciUnBindDeviceFromStub):
Likewise.
* tools/virsh.c (find-storage-pool-sources-as and find-storage-pool-sources
should't be in command group "Domain Management", move them to group
"Storage Pool".
* src/qemu/qemu_conf.c (qemudExtractVersionInfo): Check for file
before executing it here, rather than in callers.
(qemudBuildCommandLine): Rewrite with virCommand.
* src/qemu/qemu_conf.h (qemudBuildCommandLine): Update signature.
* src/qemu/qemu_driver.c (qemuAssignPCIAddresses)
(qemudStartVMDaemon, qemuDomainXMLToNative): Adjust callers.
This proof of concept shows how two existing uses of virExec
and virRun can be ported to the new virCommand APIs, and how
much simpler the code becomes
This introduces a new set of APIs in src/util/command.h
to use for invoking commands. This is intended to replace
all current usage of virRun and virExec variants, with a
more flexible and less error prone API.
* src/util/command.c: New file.
* src/util/command.h: New header.
* src/Makefile.am (UTIL_SOURCES): Build it.
* src/libvirt_private.syms: Export symbols internally.
* tests/commandtest.c: New test.
* tests/Makefile.am (check_PROGRAMS): Run it.
* tests/commandhelper.c: Auxiliary program.
* tests/commanddata/test2.log - test15.log: New expected outputs.
* cfg.mk (useless_free_options): Add virCommandFree.
(msg_gen_function): Add virCommandError.
* po/POTFILES.in: New translation.
* .x-sc_avoid_write: Add exemption.
* tests/.gitignore: Ignore new built file.
This patch allows for using custom scripts instead of /usr/bin/qemu
emulator in domain XML. To do so, one would specify relative path to the
custom script in <emulator/>. The path needs to be relative to
qemuxml2argvdata directory and it will be transparently made absolute in
runtime. The expected command line needs to contain the exact relative
path as was used in domain XML.
The problem is RelaxNG schema for domain XML only allows for absolute
path within <emulator/>. To workaround it, an extra '/' must be added at
the beginning of the path. That is, instead of "./qemu.sh" or
"../emulator/qemu.sh" one would use "/./qemu.sh" or
"/../emulator/qemu.sh". The extra slash is removed before further
processing. I don't like this workaround, it's very ugly but it's the
best option I was able to come up with. Relaxing domain XML schema is
not an option IMO.
* tools/virsh.c (virsh shouldn't use 'phy' as the disk driver if
user doesn't specify "--driver", it causes bugs, as not all of
hypervisor driver supports 'phy', and actually hypervisor should
known the correct default disk driver and subdriver, so remove it)
* src/qemu/qemu_driver.c (though MACROS QEMU_VNC_PORT_MAX, and
QEMU_VNC_PORT_MIN are defined at the beginning, numbers (65535, 5900)
are still used, replace them)
The arguments passed to the thread function must be allocated on
the heap, rather than the stack, since it is possible for the
spawning thread to continue before the new thread runs at all.
In such a case, it is possible that the area of stack where the
thread args were stored is overwritten.
* src/util/threads-pthread.c, src/util/threads-win32.c: Allocate
thread arguments on the heap
As virsh help supports both command and command group now,
update "cmdHelp" to print consite help, (this patch is
increment of "7829052757953023b0826e0293ffe18ed4ab89e9").
And also remove redundant empty line in "vshUsage".
* tools/virsh.c
Use macvtap specific functions depending on WITH_MACVTAP.
Use #if instead of #ifdef to check for WITH_MACVTAP, because
WITH_MACVTAP is always defined with value 0 or 1.
Also export virVMOperationType{To|From}String unconditional,
because they are used unconditional in the domain config code.
The output was previously:
-c | --connect <uri> hypervisor connection URI
-r | --readonly connect readonly
-d | --debug <num> debug level [0-5]
-h | --help this help
-q | --quiet quiet mode
-t | --timing print timing information
-l | --log <file> output logging to file
-v | --version[=short] program version
-V | --version=long version and full options
(note the blank line between the --version types)
This patch removes the extra blank line.
When dumping a domain, it's reasonable to save dump-file in raw format
if dump format is misconfigured or the corresponding compress program
is not available rather then fail dumping.
Change the virsh help out. The new output of "virsh help" and
"virsh --help" will be like:
Secret (help keyword 'secret'):
secret-define define or modify a secret from an XML file
secret-dumpxml secret attributes in XML
secret-set-value set a secret value
secret-get-value Output a secret value
secret-undefine undefine a secret
secret-list list secrets
Snapshot (help keyword 'snapshot'):
snapshot-create Create a snapshot
snapshot-current Get the current snapshot
snapshot-delete Delete a domain snapshot
snapshot-dumpxml Dump XML for a domain snapshot
snapshot-list List snapshots for a domain
snapshot-revert Revert a domain to a snapshot
Also support output help information of specified command group, e.g.
% ./tools/virsh help "Network Filter"
Network Filter (help keyword 'filter'):
nwfilter-define define or update a network filter from an XML file
nwfilter-undefine undefine a network filter
nwfilter-dumpxml network filter information in XML
nwfilter-list list network filters
nwfilter-edit edit XML configuration for a network filter
Each group has a help keyword, e.g.
% ./tools/virsh help filter
Network Filter (help keyword 'filter'):
nwfilter-define define or update a network filter from an XML file
nwfilter-undefine undefine a network filter
nwfilter-dumpxml network filter information in XML
nwfilter-list list network filters
nwfilter-edit edit XML configuration for a network filter
* tools/virsh.c:
- introduce new struct "vshCmdGrp" and macros to define the groups.
- split previous array "commands" into small arrays which are orgnized
by group
- changed some functions, e.g. "vshCmdDefSearch"
- Added new functions, e.g. "vshCmdGrpSearch"
- commands of each group are in "alphabetical order" now.
- command groups are in "alphabetical order" now.
- the commands are categorized with reference of
http://wiki.libvirt.org/page/VirshHelpV2 (by Justin)
- the modifications doesn't affect tests
* TODO:
- doc
This patch introduces the usage of the pre-associate state of the IEEE 802.1Qbg standard on incoming VM migration on the target host. It is in response to bugzilla entry 632750.
https://bugzilla.redhat.com/show_bug.cgi?id=632750
For being able to differentiate the exact reason as to why a macvtap device is being created, either due to a VM creation or an incoming VM migration, I needed to pass that reason as a parameter from wherever qemudStartVMDaemon is being called in order to determine whether to send an ASSOCIATE (VM creation) or a PRE-ASSOCIATE (incoming VM migration) towards lldpad.
I am also fixing a problem with the virsh domainxml-to-native call on the way.
Gerhard successfully tested the patch with a recent blade network 802.1Qbg-compliant switch.
The patch should not have any side-effects on the 802.1Qbh support in libvirt, but Roopa (cc'ed) may want to verify this.
We currently use the next free veid although there's one given in the
domain xml. This currently breaks defining new domains since vmdef->name
and veid don't match leading to the following error later on:
error: Failed to define domain from 110.xml
error: internal error Could not set UUID
Since silently ignoring vmdef->name is not nice respect it instead. We
avoid veid collisions in the upper levels already.
This reverts commit
Log all errors at level INFO to stop polluting syslog
04bd0360f3.
and makes virRaiseErrorFull() log errors at debug priority
when called from inside libvirtd. This stops libvirtd from
polluting it's own log with client errors at error priority
that'll be reported and logged on the client side anyway.
When we set migrate_speed by json, we receive the following
error message:
libvirtError: internal error unable to execute QEMU command
'migrate_set_speed': Invalid parameter type, expected: number
The reason is that: the arguments of migrate_set_speed
by json is json number, not json string.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
The dominfo.py example script has a bogus check for /proc/xen
existing. The default connection cannot be assumed to be Xen
any more
* examples/python/dominfo.py: Remove check for Xen
The nodeinfo structure includes
nodes : the number of NUMA cell, 1 for uniform mem access
sockets : number of CPU socket per node
cores : number of core per socket
threads : number of threads per core
which does not work well for NUMA topologies where each node does not
consist of integral number of CPU sockets.
We also have VIR_NODEINFO_MAXCPUS macro in public libvirt.h which
computes maximum number of CPUs as (nodes * sockets * cores * threads).
As a result, we can't just change sockets to report total number of
sockets instead of sockets per node. This would probably be the easiest
since I doubt anyone is using the field directly. But because of the
macro, some apps might be using sockets indirectly.
This patch leaves sockets to be the number of CPU sockets per node (and
fixes qemu driver to comply with this) on machines where sockets can be
divided by nodes. If we can't divide sockets by nodes, we behave as if
there was just one NUMA node containing all sockets. Apps interested in
NUMA should consult capabilities XML, which is what they probably do
anyway.
This way, the only case in which apps that care about NUMA may break is
on machines with funky NUMA topology. And there is a chance libvirt
wasn't able to start any guests on those machines anyway (although it
depends on the topology, total number of CPUs and kernel version).
Nothing changes at all for apps that don't care about NUMA.
security_context_t happens to be a typedef for char*, and happens to
begin with a string usable as a raw context string. But in reality,
it is an opaque type that may or may not have additional information
after the first NUL byte, where that additional information can
include pointers that can only be freed via freecon().
Proof is from this valgrind run of daemon/libvirtd:
==6028== 839,169 (40 direct, 839,129 indirect) bytes in 1 blocks are definitely lost in loss record 274 of 274
==6028== at 0x4A0515D: malloc (vg_replace_malloc.c:195)
==6028== by 0x3022E0D48C: selabel_open (label.c:165)
==6028== by 0x3022E11646: matchpathcon_init_prefix (matchpathcon.c:296)
==6028== by 0x3022E1190D: matchpathcon (matchpathcon.c:317)
==6028== by 0x4F9D842: SELinuxRestoreSecurityFileLabel (security_selinux.c:382)
800k is a lot of memory to be leaking.
* src/storage/storage_backend.c
(virStorageBackendUpdateVolTargetInfoFD): Avoid leak on error.
* src/security/security_selinux.c
(SELinuxReserveSecurityLabel, SELinuxGetSecurityProcessLabel)
(SELinuxRestoreSecurityFileLabel): Use correct function to free
security_context_t.
Making this change makes it easier to spot the memory leaks
that will be fixed in the next patch.
* cfg.mk (sc_prohibit_xmlGetProp): New rule.
* .x-sc_prohibit_xmlGetProp: New exception.
* Makefile.am (EXTRA_DIST): Ship exception file.
* tools/virsh.c (cmdDetachInterface, cmdDetachDisk): Adjust
offenders.
* src/conf/storage_conf.c (virStoragePoolDefParseSource):
Likewise.
* src/conf/network_conf.c (virNetworkDHCPRangeDefParseXML)
(virNetworkIPParseXML): Likewise.
* Makefile.am (EXTRA_DIST): Factor exceptions files...
(syntax_check_excpetions): into new list. Include recently added
exceptions.
* cfg.mk (sc_x_sc_dist_check): New check, copied from coreutils.
virConnectClose calls virUnrefConnect which in turn closes
all open drivers when the refcount of that connection dropped
to zero. This works fine when you free all other objects that
hold a ref to the connection before you close it, because in
this case virUnrefConnect is the one that removes the last
ref to the connection.
But it doesn't work when you close the connection first before
freeing the other objects. This is because the other virUnref*
functions call virReleaseConnect when they detect that the
connection's refcount dropped to zero. In this case another
virUnref* function (different from virUnrefConnect) removes the
last ref to the connection. This results in not closing the
open drivers and leaking things that should have been cleaned
up in the driver close functions.
To fix this move the driver close calls to virReleaseConnect.
Except LXC and UML driver, implementations of all other drivers
simply return 0, because these drivers doesn't have config both
in memory and on disk, no need to track if the domain of these
drivers updated or not.
Rename "xenUnifiedDomainisPersistent" to "xenUnifiedDomainIsPersistent"
* esx/esx_driver.c
* lxc/lxc_driver.c
* opennebula/one_driver.c
* openvz/openvz_driver.c
* phyp/phyp_driver.c
* test/test_driver.c
* uml/uml_driver.c
* vbox/vbox_tmpl.c
* xen/xen_driver.c
* xenapi/xenapi_driver.c
introduce new public API "virDomainIsUpdated"
* src/conf/domain_conf.h (new member "updated" for "virDomainObj")
* src/libvirt_public.syms
* include/libvirt/libvirt.h.in
gnulib wraps Windows' SOCKET handle based send() and recv() functions
into file descriptor based ones that are used in libvirt.
Even though GnuTLS is using gnulib too, it explicitly doesn't use
gnulib's replacement functions on Windows. By default GnuTLS uses the
SOCKET handle based send() and recv(). This makes gnutls_handshake()
fail internally with a WSAENOTSOCK error because libvirt passes a
file descriptor; GnuTLS needs the SOCKET handle.
To avoid this mismatch make sure that GnuTLS uses gnulib's replacment
functions, by setting custom pull() and push() functions for GnuTLS.
Without this fix, the test suite doesn't print error messages when a libvirt
function fails. Additionally, only print error reports if DEBUG or VERBOSE
requested.
The stdio.h header has a function called 'remove' declared. This
clashes with the 'remove' parameter in virShrinkN
* src/util/memory.c: Rename 'remove' to 'toremove'
virsh was not checking for a error code when listing storage
volumes. So when listing volumes in a pool that was shutoff,
no output was displayed
* tools/virsh.c: Fix error handling when listing volumes
The SCSI volumes currently get a name like '17:0:0:1' based
on $host:$bus:$target:$lun. The names are intended to be unique
per pool and stable across pool restarts. The inclusion of the
$host component breaks this, because the $host number for iSCSI
pools is dynamically allocated by the kernel at time of login.
This changes the name to be 'unit:0:0:1', ie removes the leading
host component. The 'unit:' prefix is just to ensure the volume
name doesn't start with a number and make it clearer when seen
out of context.
* src/storage/storage_backend_scsi.c: Improve volume name
field value stability and uniqueness
Many operations are not valid on inactive storage pools. The
storage driver is currently returning VIR_ERR_INTERNAL_ERROR
in these cases, rather than the more suitable error code
VIR_ERR_OPERATION_INVALID
* src/storage/storage_driver.c: Fix error code when pool
is not active
When libvirt starts up all storage pools default to the inactive
state, even if the underlying storage is already active on the
host. This introduces a new API into the internal storage backend
drivers that checks whether a storage pool is already active. If
the pool is active at libvirtd startup, the volume list will be
immediately populated.
* src/storage/storage_backend.h: New internal API for checking
storage pool state
* src/storage/storage_driver.c: Check whether a pool is active
upon driver startup
* src/storage/storage_backend_fs.c, src/storage/storage_backend_iscsi.c,
src/storage/storage_backend_logical.c, src/storage/storage_backend_mpath.c,
src/storage/storage_backend_scsi.c: Add checks for pool state
The "find-storage-pool-sources-as" command takes two arguments,
a hostname and a port number. For some reason the code would
also then look for a port number appended to the hostname
string by searching for ':'. This totally breaks if the user
gives an IPv6 address, and is redundant, since you can already
provide a port as a separate argument
* tools/virsh.c: Remove bogus port number handling code
The code generating XML for storage pool source discovery is
hardcoded to only allow a hostname and optional port number.
Refactor this code to make it easier to add support for extra
parameters.
* tools/virsh.c: Refactor XML generator
Since the previous patch added support for parsing the output of
the 'sendtargets' command, it is now trivial to support the
storage pool discovery API.
Given a hostname and optional portnumber and initiator IQN,
the code can return a full list of storage pool source docs,
each one representing a iSCSI target.
* src/storage/storage_backend_iscsi.c: Wire up target
auto-discovery
The Linux iSCSI initiator toolchain has the dubious feature that
if you ever run the 'sendtargets' command to merely query what
targets are available from a server, the results will be recorded
in /var/lib/iscsi. Any time the '/etc/init.d/iscsi' script runs
in the future, it will then automatically login to all those
targets. /etc/init.d/iscsi is automatically run whenever a NIC
comes online.
So from the moment you ask a server what targets are available,
your client will forever more automatically try to login to all
targets without ever asking if you actually want it todo this.
To stop this stupid behaviour, we need to run
iscsiadm --portal $PORTAL --target $TARGET
--op update --name node.startup --value manual
For every target on the server.
* src/storage/storage_backend_iscsi.c: Disable automatic login
for targets found as a result of a 'sendtargets' command
The following series of patches are adding significant
extra functionality to the iSCSI driver. THe current
internal helper methods are not sufficiently flexible
to cope with these changes. This patch refactors the
code to avoid needing to have a virStoragePoolObjPtr
instance as a parameter, instead passing individual
target, portal and initiatoriqn parameters.
It also removes hardcoding of port 3260 in the portal
address, instead using the XML value if any.
* src/storage/storage_backend_iscsi.c: Refactor internal
helper methods
The XML docs describe a 'port' attribute for the
storage source <host> element, but the parser never
handled it.
* docs/schemas/storagepool.rng: Define port attribute
* src/conf/storage_conf.c: Add missing parsing/formatting
of host port number
* src/conf/storage_conf.h: Remove bogus/unused 'protocol' field
libvirtd no longer deals with SIGCHLD in its signal handler
since the QEMU driver switched to always daemonize processes.
Thus remove the sigaction for it, to avoid warning log
messages
* daemon/libvirtd.c: Don't catch SIGCHLD
When running non-root, the QEMU log file is usually opened with
truncation, since there is no logrotate for non-root usage.
This means that when libvirt logs the shutdown timestamp, the
log is accidentally truncated
* src/qemu/qemu_driver.c: Never truncate log file with shutdown
message
The QEMU logger appends a ':' to the timestamp when it deems
it neccessary, so the virTimestamp API should not duplicate
this
* src/util/util.c: Remove trailing ':' from timestamp
Everytime a public API returns an error, libvirtd pollutes
syslog with that error message. Reduce the error logging
level to INFO so these don't appear by default.
* src/util/virterror.c: Log all errors at INFO
The virFork call resets all logging handlers that may have been
set. Re-enable them after fork in virExec, so that env variables
fir LIBVIRT_LOG_OUTPUTS and LIBVIRT_LOG_FILTERS take effect
until the execve()
* src/util/util.c: Preserve logging in child in virExec
To allow messages from different threads to be untangled,
include an integer thread identifier in log messages.
* src/util/logging.c: Include thread ID
* src/util/threads.h, src/util/threads.h, src/util/threads-pthread.c:
Add new virThreadSelfID() function
* configure.ac: Check for sys/syscall.h
Do this by adding a helper function to get the persistent domain config. This
should be useful for other functions that may eventually want to alter
the persistent domain config (attach/detach device). Also make similar changes
to the test drivers setvcpus command.
A caveat is that the function will return the running config for a transient
domain, rather than error. This simplifies callers, as long as they use
other methods to ensure the guest is persistent.
Doing 'virsh setvcpus $vm --config 10' doesn't check the value against the
domains maxvcpus value. A larger value for example will prevent the guest
from starting.
Also make a similar change to the test driver.
The current semantics of non-persistent hotplug/update are confusing: the
changes will persist as long as the in memory domain definition isn't
overwritten. This means hotplug changes stay around until the domain is
redefined or libvirtd is restarted.
Call virDomainObjSetDefTransient at VM startup, so that we properly discard
hotplug changes when the VM is shutdown.
This function sets the running domain definition as transient, by reparsing
the persistent config and assigning it to newDef. This ensures that any
changes made to the running definition and not the persistent config are
discarded when the VM is shutdown.
This patch makes two corrections to the newly-added QED support patch series:
- Correct the QED header field offsets
- Remove XML parsing for VIR_STORAGE_FILE_AUTO_SAFE
Signed-off-by: Adam Litke <agl@us.ibm.com>
The virt-mem program is no longer shipped, but was still being
referenced at the bottom of the virsh and libvirtd man pages.
This patch removes it from those man pages, addressing
BZ# 639603:
https://bugzilla.redhat.com/show_bug.cgi?id=639603
The IP address learning thread was causing a deadlock when it instantiated a filter while a filter update/change was ongoing. The reason for this was the ordering of locks due to the following calls
virNWFilterUnlockFilterUpdates()
virNWFilterPoolObjFindByName()
The below patch now puts the order of the locks in the above shown order when instantiating the filter from the IP address learning thread.
Disk image formats that wish to opt-out of version validation are supposed to
set versionOffset to -1 in their fileTypeInfo entry.
By unconditionally returning False for these formats,
virStorageFileMatchesVersion() incorrectly reports a version mismatch when the
test was actually skipped. The correct behavior is to return True so these
formats can be successfully probed using the magic bytes alone.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Using 'int ret = strcmp(a, b)' in a qsort function is a valid use of
str[n]cmp that should _not_ be turned to STREQ, but it was falling
foul of our specific syntax-check. Meanwhile, gnulib's maint.mk
already has a tighter bound for strcmp, so we can copy that regex and
just check for strncmp, which results in fewer false positives that
require exceptions.
* cfg.mk (sc_prohibit_strcmp_and_strncmp): Rename...
(sc_prohibit_strncmp): ...to this, and tighten, to mirror
maint.mk's sc_prohibit_strcmp's better regex.
* Makefile.am (syntax_check_exceptions): Update exception rule.
* .x-sc_prohibit_strcmp_and_strncmp: Rename...
* .x-sc_prohibit_strncmp: ...and trim.
* daemon/libvirtd.h (qemud_server): Change types of members
tracking array sizes, and add allocation trackers.
* daemon/event.c (virEventLoop): Likewise.
(virEventAddHandleImpl, virEventAddTimeoutImpl)
(virEventCleanupTimeouts, virEventCleanupHandles): Use
VIR_RESIZE_N instead of VIR_REALLOC_N. Tweak debug messages to
match type changes.
* daemon/libvirtd.c (qemudDispatchServer, qemudRunLoop): Likewise.
The code in SELinuxRestoreSecurityChardevLabel() was trying to
use SELinuxSetFilecon directly for devices or file types while
it should really use SELinuxRestoreSecurityFileLabel encapsulating
routine, which avoid various problems like resolving symlinks,
making sure he file exists and work around NFS problems
Include locale.h for setlocale().
Revert the usage string back to it's original form.
Use puts() instead of fputs(), as fputs() expects a FILE*.
Add closing parenthesis to some vah_error() calls.
Use argv[0] instead of an undefined argv0.
Last time I ran ./autobuild.sh was on F13; and upgrading to F14
exposed these leftovers due to a newer gcov than what was in the stale
files, in the form of spurious messages that break 'make check':
+profiling:/home/remote/eblake/libvirt-tmp/tools/virsh-console.gcda:Version mismatch - expected 405R got 404R
and concluding with a bug in the autobuild.sh script itself:
./autobuild.sh: line 44: test: =: unary operator expected
* autobuild.sh: avoid syntax error on failed test
* tools/Makefile.am (CLEANFILES): Clean coverage files.
These messages are visible to the user, so they should be
consistently translated.
* cfg.mk (msg_gen_function): Add vah_error, vah_warning.
* src/security/virt-aa-helper.c: Translate messages.
(catchXMLError): Fix capitalization.
Allows bootstrap to work on FreeBSD, where gzip doesn't have a '.'
in its version; and silences false positives in the new
'make syntax-check' rule.
* .gnulib: Update to latest.
* bootstrap: Synchronize to upstream.
* .x-sc_bindtextdomain: New exemptions.
* Makefile.am (syntax_check_exceptions): Ship new file.
* .gitignore: Regenerate per latest bootstrap, anchor entries that
are only in the root directory, and consolidate entries from other
generated .gitignore files.
* build-aux/.gitignore, m4/.gitignore, po/.gitignore: Remove from
version control, since bootstrap generates them.
Per the gettext developer:
http://lists.gnu.org/archive/html/bug-gnu-utils/2010-10/msg00019.htmlhttp://lists.gnu.org/archive/html/bug-gnu-utils/2010-10/msg00021.html
gettext() doesn't work correctly on all platforms unless you have
called setlocale(). Furthermore, gnulib's gettext.h has provisions
for setting up a default locale, which is the preferred method for
libraries to use gettext without having to call textdomain() and
override the main program's default domain (virInitialize already
calls bindtextdomain(), but this is insufficient without the
setlocale() added in this patch; and a redundant bindtextdomain()
in this patch doesn't hurt, but serves as a good example for other
packages that need to bind a second translation domain).
This patch is needed to silence a new gnulib 'make syntax-check'
rule in the next patch.
* daemon/libvirtd.c (main): Setup locale and gettext.
* src/lxc/lxc_controller.c (main): Likewise.
* src/security/virt-aa-helper.c (main): Likewise.
* src/storage/parthelper.c (main): Likewise.
* tools/virsh.c (main): Fix exit status.
* src/internal.h (DEFAULT_TEXT_DOMAIN): Define, for gettext.h.
(_): Simplify definition accordingly.
* po/POTFILES.in: Add src/storage/parthelper.c.
I am replacing the last instances of close() I found with VIR_CLOSE() / VIR_FORCE_CLOSE respectively.
The first part patches virsh, which I missed out on previously.
The 2nd patch I had left out intentionally to look at it more carefully:
The 'closed' variable could be easily removed since it wasn't used anywhere else. The possible race condition that could result from the filedescriptor being closed and not set to -1 (and possibly let us write into 'something' totally different if the fd was allocated by another thread) seems to be prevented by the qemuMonitorLock() already placed around the code that reads from or writes to the fd. So the change of this code as shown in the patch should not have any side-effects.
Rather than only cleaning any remaining ebtables rules, also clean those applied to iptables and ip6tables when detecting the IP address of an interface. Previous applied iptables rules may hinder DHCP packets.
Similarly to deprecating close(), I am now deprecating fclose() and
introduce VIR_FORCE_FCLOSE() and VIR_FCLOSE(). Also, fdopen() is replaced with
VIR_FDOPEN().
Most of the files are opened in read-only mode, so usage of
VIR_FORCE_CLOSE() seemed appropriate. Others that are opened in write
mode already had the fclose()< 0 check and I converted those to
VIR_FCLOSE()< 0.
I did not find occurrences of possible double-closed files on the way.
Currently only support domain start and shutdown, for domain start,
record timestamp before the qemu command line, and for domain shutdown,
just say it's shutting down with timestamp.
* src/qemu/qemu_driver.c (qemudStartVMDaemon, qemudShutdownVMDaemon
introduced two macros - START_POSTFIX, SHUTDOWN_POSTFIX)
* src/nwfilter/nwfilter_ebiptables_driver.c
(ebiptablesWriteToTempFile): Use /bin/sh.
(bash_cmd_path): Delete.
(ebiptablesDriverInit, ebiptablesDriverShutdown): No need to
search for bash.
(CMD_EXEC): Prefer $() over ``, since we can assume POSIX.
(iptablesSetupVirtInPost): Use portable 'test' syntax.
(iptablesLinkIPTablesBaseChain): Use POSIX $(()) syntax.
This is more flexible regarding the location of the python binary
but doesn't allow to pass the -u flag. The -i flag can be passed
from inside the script using the PYTHONINSPECT env variable.
This fixes a problem with the esx_vi_generator.py on FreeBSD.
This makes the storage driver fail when the connection is
opened with the VIR_CONNECT_RO flag, resulting in a read-only
connection with no storage driver.
In a first step I am converting the netlink message construction in
macvtap code to use libnl. It's pretty much a 1:1 conversion except that
now the message needs to be allocated and deallocated.
IP addresses and MAC addresses had been defined in the RNG simply as
<text/> meaning that, according to the RNG, any string could go in
there. Of course the C parsing code does a much better job of
validating, but we may as well have this describing the contents
accurately (even though it's currently only used during "make check").
All the other RNG files in libvirt are enclosed within <grammar>. This
commit makes the syntactical changes necessary to make network.rng fit
that pattern. (This is the first step in adding some data type
definitions to network.rng for more exact validation of IP and MAC
addresses).
Formatting changes (indentation) will be done in a subsequent commit,
so that actual changes to the code won't be obscured by whitespace.
When <uuid> is not in the XML, a virUUIDGenerate() ends up being called which
is unnecessary and can lead to crashes if /dev/urandom isn't available
because virRandomInitialize() is not called within virt-aa-helper. This patch
adds verify_xpath_context() and updates caps_mockup() to use it.
Bug-Ubuntu: https://launchpad.net/bugs/672943
If virDomainAttachDevice() was called with an image that was located
on a root-squashed NFS server, and in a directory that was unreadable
by root on the machine running libvirtd, the attach would fail due to
an attempt to change the selinux label of the image with EACCES (which
isn't covered as an ignore case in SELinuxSetFilecon())
NFS doesn't support SELinux labelling anyway, so we mimic the failure
handling of commit 93a18bbafa, which
just ignores the errors if the target is on an NFS filesystem (in
SELinuxSetSecurityAllLabel() only, though.)
This can be seen as a follow-on to commit
347d266c51, which ignores file open
failures of files on NFS that occur directly in
virDomainDiskDefForeachPath() (also necessary), but does not ignore
failures in functions that are called from there (eg
SELinuxSetSecurityFileLabel()).
The event watches need to be removed before the event loop
terminates, otherwise they cause a dangling reference to
be held on the virStreamPtr, which in turns holds a reference
on virConnectPtr, which in turn causes errors like
"Failed to disconnect from the hypervisor"
* tools/console.c: Remove watches before event loop quits
* tools/virsh.c: Print out dangling reference count
Introduce implementations of the virDomainOpenConsole() API
for LXC, Xen and UML drivers.
* src/lxc/lxc_driver.c, src/lxc/lxc_driver.c,
src/xen/xen_driver.c: Wire up virDomainOpenConsole
When closing open streams after a client quits, the event
callback was not removed. This mean that poll() was using
a closed FD and returning POLLNVAL in a busy-wait loop.
* daemon/stream.c: Disconnect stream callbacks
This re-writes the 'virsh console' command so that it uses
the new streams API. This lets it run remotely and/or as a
non-root user. This requires that virsh be linked against
the simple event loop from libvirtd in daemon/event.c
As an added bonus, it can now connect to any console device,
not just the first one.
* tools/Makefile.am: Link to event.c
* tools/console.c, tools/console.h: Rewrite to use the
virDomainOpenConsole() APIs with streams
* tools/virsh.c: Support choosing the console name
via --devname $NAME
The code currently uses pthreads APIs directly. This is not
portable to Win32 threads. Switch it over to use the portability
APIs. Also add a wrapper for pipe() which is subtely different
on Win32
* daemon/event.c: Switch to use virMutex & virThread.
The util/threads.c/h code already has APIs for mutexes,
condition variables and thread locals. This commit adds
in code for actually creating threads.
* src/libvirt_private.syms: Export new symbols
* src/util/threads.h: Define APIs virThreadCreate, virThreadSelf,
virThreadIsSelf and virThreadJoin
* src/util/threads-win32.c, src/util/threads-win32.h: Win32
impl of threads
* src/util/threads-pthread.c, src/util/threads-pthread.h: POSIX
impl of threads
This provides an implementation of the virDomainOpenConsole
API with the QEMU driver. For the streams code, this reuses
most of the code previously added for the tunnelled migration
streams since it is generic.
* src/qemu/qemu_driver.c: Support virDomainOpenConsole
To avoid the need for duplicating implementations of virStream
drivers, provide a generic implementation that can handle any
FD based stream. This code is copied from the existing impl
in the QEMU driver, with the locking moved into the stream
impl, and addition of a read callback
The FD stream code will refuse to operate on regular files or
block devices, since those can't report EAGAIN properly when
they would block on I/O
* include/libvirt/virterror.h, include/libvirt/virterror.h: Add
VIR_FROM_STREAM error domain
* src/qemu/qemu_driver.c: Remove code obsoleted by the new
generic streams driver.
* src/fdstream.h, src/fdstream.c, src/fdstream.c,
src/libvirt_private.syms: Generic reusable FD based streams
Now that bi-directional, non-blocking streams are supported
in the remote driver, some of the VIR_WARN statements need
to be reduced to VIR_DEBUG.
* src/remote/remote_driver.c: Lower logging level
This provides an implementation of the virDomainOpenConsole
API for the remote driver client and server.
* daemon/remote.c: Server side impl
* src/remote/remote_driver.c: Client impl
* src/remote/remote_protocol.x: Wire definition
To enable virsh console (or equivalent) to be used remotely
it is necessary to provide remote access to the /dev/pts/XXX
pseudo-TTY associated with the console/serial/parallel device
in the guest. The virStream API provide a bi-directional I/O
stream capability that can be used for this purpose. This
patch thus introduces a virDomainOpenConsole API that uses
the stream APIs.
* src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in, src/driver.h: Define the
new virDomainOpenConsole API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub
API entry point
The current remote driver code for streams only supports
blocking I/O mode. This is fine for the usage with migration
but is a problem for more general use cases, in particular
bi-directional streams.
This adds supported for the stream callbacks and non-blocking
I/O. with the minor caveat is that it doesn't actually do
non-blocking I/O for sending stream data, only receiving it.
A future patch will try to do non-blocking sends, but this is
quite tricky to get right.
* src/remote/remote_driver.c: Allow non-blocking I/O for
streams and support callbacks
The /dev/console device inside the container must NOT map
to the real /dev/console device node, since this allows the
container control over the current host console. A fun side
effect of this is that starting a container containing a
real Fedora OS will kill off your X server.
Remove the /dev/console node, and replace it with a symlink
to the primary console TTY
* src/lxc/lxc_container.c: Replace /dev/console with a
symlink to /dev/pty/0
* src/lxc/lxc_controller.c: Remove /dev/console from cgroups
ACL
* tools/virsh.c (vshParseArgv): Use NULL instead of 0 for pointer,
and symbolic names for has_arg. Give --version an optional arg.
(vshUsage): Document this.
* tools/virsh.pod: Likewise.
QEMU allows forcing a CDROM eject even if the guest has locked the device.
Expose this via a new UpdateDevice flag, VIR_DOMAIN_DEVICE_MODIFY_FORCE.
This has been requested for RHEV:
https://bugzilla.redhat.com/show_bug.cgi?id=626305
v2: Change flag name, bool cleanups
https://bugzilla.redhat.com/show_bug.cgi?id=649511
Regression of forcing 0700 permissions (which breaks guest startup
because the qemu user can't see /var/lib/libvirt/*.monitor) was
introduced in commit 66823690e, as part of libvirt 0.8.2.
* libvirt.spec.in (%files): Drop %{_localstatedir}/lib/libvirt,
since libvirt depends on libvirt-client.
(%files client): Guarantee 755 permissions on
%(_localstatedir}/lib/libvirt, since the qemu user must be able to
do pathname resolution to a subdirectory.
I am trying to use a qcow image with libvirt where the backing 'file' is a
qemu-nbd server. Unfortunately virDomainDiskDefForeachPath() assumes that
backingStore is always a real file so something like 'nbd:0:3333' is rejected
because a file with that name cannot be accessed. Note that I am not worried
about directly using nbd images. That would require a new disk type with XML
markup, etc. I only want it to be permitted as a backingStore
The following patch implements danpb's suggestion:
> I think I'm inclined to push the logic for skipping NBD one stage higher.
> I'd rather expect virStorageFileGetMetadata() to return all backing
> stores, even if not files. The virDomainDiskDefForeachPath() method
> should definitely ignore non-file backing stores though.
>
> So what I'm thinking is to extend the virStorageFileMetadata struct and
> just add a 'bool isFile' field to it. Default this field to true, unless
> you see the prefix of nbd: in which case set it to false. The
> virDomainDiskDefForeachPath() method can then skip over any backing
> store with isFile == false
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
xencapstest calls xenHypervisorMakeCapabilitiesInternal with conn == NULL
which calls xenDaemonNodeGetTopology with conn == NULL when a recent
enough Xen was detected (sys_interface_version >= SYS_IFACE_MIN_VERS_NUMA).
But xenDaemonNodeGetTopology insists in having conn != NULL and fails,
because it expects to be able to talk to an actual xend.
We cannot do that in a 'make check' test. Therefore, only call the xend
subdriver function when conn isn't NULL.
Reported by Andy Howell and Jim Fehlig.
Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.
* docs/schemas/domain.rng: Fix merge error which left SPICE channel
elements under VNC schema.
* tests/qemuhelptest.c: Add SPICE flag to kvm-83 test
* tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Add
<memballoon> element
This extends the SPICE XML to allow channel security options
<graphics type='spice' port='-1' tlsPort='-1' autoport='yes'>
<channel name='main' mode='secure'/>
<channel name='record' mode='insecure'/>
</graphics>
Any non-specified channel uses the default, which allows both
secure & insecure usage
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/libvirt_private.syms: Add XML syntax for specifying per
channel security options for spice.
* src/qemu/qemu_conf.c: Configure channel security with spice
QEMU crashes & burns if you try multiple Cirrus video cards, but
QXL copes fine. Adapt QEMU config code to allow multiple QXL
video cards
* src/qemu/qemu_conf.c: Support multiple QXL video cards
This extends the XML syntax for <graphics> to allow a password
expiry time to be set
eg
<graphics type='vnc' port='5900' autoport='yes' keymap='en-us' passwd='12345' passwdValidTo='2010-04-09T15:51:00'/>
The timestamp is in UTC.
* src/conf/domain_conf.h: Pull passwd out into separate struct
virDomainGraphicsAuthDef to allow sharing between VNC & SPICE
* src/conf/domain_conf.c: Add parsing/formatting of new passwdValidTo
argument
* src/opennebula/one_conf.c, src/qemu/qemu_conf.c, src/qemu/qemu_driver.c,
src/xen/xend_internal.c, src/xen/xm_internal.c: Update for changed
struct containing VNC password
In common with VNC, the QEMU driver configuration file is used
specify the host level TLS certificate location and a default
password / listen address
* src/qemu/qemu.conf: Add spice_listen, spice_tls,
spice_tls_x509_cert_dir & spice_password config params
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Parsing of
spice config parameters and updating -spice arg generation
to use them
* tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-rhel6.args,
tests/qemuxml2argvtest.c: Expand test case to cover driver
level configuration
This supports the -spice argument posted for review against
the latest upstream QEMU/KVM. This supports the bare minimum
config with port, TLS port & listen address. The x509 bits are
added in a later patch.
* src/qemu_conf.c, src/qemu_conf.h: Add SPICE flag. Check for
-spice availability. Format -spice arg for command line
* qemuhelptest.c: Add SPICE flag
* qemuxml2argvdata/qemuxml2argv-graphics-spice.args: Add <graphics>
for spice
* qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Add -spice arg
* qemuxml2argvtest.c: Add SPICE flag
This supports the '-vga qxl' parameter in upstream QEMU/KVM
which has SPICE support added. This isn't particularly useful
until you get the next patch for -spice support. Also note that
while the libvirt XML supports multiple video devices, this
patch only supports a single one. A later patch can add support
for 2nd, 3rd, etc PCI devices for QXL
* src/qemu/qemu_conf.h: Flag for QXL support
* src/qemu/qemu_conf.c: Probe for '-vga qxl' support and implement it
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c,
tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Test
case for generating spice args with RHEL6 kvm
This adds an element
<graphics type='spice' port='5903' tlsPort='5904' autoport='yes' listen='127.0.0.1'/>
This is the bare minimum that should be exposed in the guest
config for SPICE. Other parameters are better handled as per
host level configuration tunables
* docs/schemas/domain.rng: Define the SPICE <graphics> schema
* src/domain_conf.h, src/domain_conf.c: Add parsing and formatting
for SPICE graphics config
* src/qemu_conf.c: Complain about unsupported graphics types
* src/qemu_conf.c: Add dummy entry in enumeration
* docs/schemas/domain.rng: Add 'qxl' as a type for the <video> tag
* src/domain_conf.c, src/domain_conf.h: Add QXL to video type
enumerations
To ease debugging this trivial patch allows to find what was compiled
in in the local version of libvirt, this doesn't work for remote access
but that's probably sufficient. With the patch I get on my machine:
paphio:~/libvirt/tools -> ./virsh -V
Virsh command line tool of libvirt 0.8.4
See web site at http://libvirt.org/
Compiled with support for:
Hypervisors: Xen QEmu/KVM UML OpenVZ LXC ESX PHYP Test
Networking: Remote Daemon Network Bridging Netcf Nwfilter
Storage: Dir Disk Filesystem SCSI Multipath iSCSI LVM
Miscellaneous: SELinux Secrets Debug Readline
paphio:~/libvirt/tools ->
* tools/virsh.c: add -V option
* tools/virsh.pod: document the extension
There is no point in trying to fill params beyond the first error,
because when lxcDomainGetMemoryParameters returns -1 then the caller
cannot detect which values in params are valid.
The patch is based on the possiblity in the QEmu command line to
add -smbios options allowing to override the default values picked
by QEmu. We need to detect this first from QEmu help output.
If the domain is defined with smbios to be inherited from host
then we pass the values coming from the Host own SMBIOS, but
if the domain is defined with smbios to come from sysinfo, we
use the ones coming from the domain definition.
* src/qemu/qemu_conf.h: add the QEMUD_CMD_FLAG_SMBIOS_TYPE enum
value
* src/qemu/qemu_conf.c: scan the help output for the smbios support,
and if available add support based on the domain definitions,
and host data
* tests/qemuhelptest.c: add the new enum in the outputs
Move existing routines about virSysinfoDef to an util module,
add a new entry point virSysinfoRead() to read the host values
with dmidecode
* src/conf/domain_conf.c src/conf/domain_conf.h src/util/sysinfo.c
src/util/sysinfo.h: move to a new module, add virSysinfoRead()
* src/Makefile.am: handle the new module build
* src/libvirt_private.syms: new internal symbols
* include/libvirt/virterror.h src/util/virterror.c: defined a new
error code for that module
* po/POTFILES.in: add new file for translations
the element has a mode attribute allowing only 3 values:
- emulate: use the smbios emulation from the hypervisor
- host: try to use the smbios values from the node
- sysinfo: grab the values from the <sysinfo> fields
* docs/schemas/domain.rng: extend the schemas
* src/conf/domain_conf.h: add the flag to the domain config
* src/conf/domain_conf.h: parse and serialize the smbios if present
* src/conf/domain_conf.h: defines a new internal type added to the
domain structure
* src/conf/domain_conf.c: parsing and serialization of that new type
Now that the virsh parsing has been revamped, we can
implement qemu-monitor-command. This is basically the same
as it was in previous iterations, but has now been tested to
work both with the plain text monitor and the QMP monitor.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
During a shutdown/restart cycle libvirtd forgot the macvtap device name that it had created on behalf of a VM so that a stale macvtap device remained on the host when the VM terminated. Libvirtd has to actively tear down a macvtap device and it uses its name for identifying which device to tear down.
The solution is to not blank out the <target dev='...'/> completely, but only blank it out on VMs that are not active. So, if a VM is active, the device name makes it into the XML and is also being parsed. If a VM is not active, the device name is discarded.
libvirtd.conf uses "libvirt" as the value of "unix_sock_group",
however, group "libvirt" may not exist on the system, in this case
the case will always fail.
As a solution, replace "libvirt" with "$USER" in "tmp.conf".
virPipeReadUntilEOF is used to read the stdout of exec'ed
and this could fail to capture the full output and read only
1024 bytes.
The problem is that this is based on a poll loop, and in the
loop we read at most 1024 bytes per file descriptor, but we also
note in the loop if poll indicates that the process won't output
more than that on that fd by setting finished[i] = 1.
The simplest way is that if we read a full buffer make sure
finished[i] is still 0 because we will need another pass in the
loop.
Commit e8066d53 broke the build with polkit0:
remote.c: In function 'remoteDispatchAuthPolkit':
remote.c:4177: error: 'rv' undeclared (first use in this function)
Add missing identifier.
The remoteIO() method has wierd calling conventions, where
it is passed a pre-allocated 'struct remote_call *' but
then free()s it itself, instead of letting the caller free().
This fixes those weird semantics
* src/remote/remote_driver.c: Sanitize semantics of remoteIO
method wrt to memory release
A couple of places in the text monitor were overwriting the
'ret' variable with a >= 0 value before success was actually
determined. So later error paths would not correctly return
the -1 value. The drive_add code was not checking for errors
like missing command
* src/qemu/qemu_monitor_text.c: Misc error handling fixes
NFS in root squash mode may prevent opening disk images to
determine backing store. Ignore errors in this scenario.
* src/security/security_selinux.c: Ignore open failures on disk
images
NFS does not support file labelling, so ignore this error
for stdin_path when on NFS.
* src/security/security_selinux.c: Ignore failures on labelling
stdin_path on NFS
* src/util/storage_file.c, src/util/storage_file.h: Refine
virStorageFileIsSharedFS() to allow it to check for a
specific FS type.
Commit 06f81c63eb attempted to make
QEMU driver ignore the failure to relabel 'stdin_path' if it was
on NFS. The actual result was that it ignores *all* failures to
label any aspect of the VM, unless stdin_path is non-NULL and
is not on NFS.
* src/qemu/qemu_driver.c: Treat all relabel failures as terminal
* src/xen/xend_internal.c (xenDaemonFormatSxpr): Hoist verify
outside of function to avoid a -Wnested-externs warning.
* src/xen/xm_internal.c (xenXMDomainConfigFormat): Likewise.
Reported by Daniel P. Berrange.
* src/xen/xen_hypervisor.c (MAX_VIRT_CPUS): Move...
* src/xen/xen_driver.h (MAX_VIRT_CPUS): ...so all xen code can see
same value.
* src/xen/xend_internal.c (sexpr_to_xend_domain_info)
(xenDaemonDomainGetVcpusFlags, xenDaemonParseSxpr)
(xenDaemonFormatSxpr): Work if MAX_VIRT_CPUS is 64 on a platform
where long is 64-bits.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
Add dump_image_format[] to qemu.conf and support compressed dump
at virsh dump. coredump compression is important for saving disk space
in an environment where multiple guests run.
In general, "disk space for dump" is specially allocated and will be
a dead space in the system. It's used only at emergency. So, it's better
to have both of save_image_format and dump_image_format. "save" is done
in scheduled manner with enough calculated disk space for it.
This code reuses some of save_image_format[] and supports the same format.
Changelog:
- modified libvirtd_qemu.aug
- modified test_libvirtd_qemu.aug
- fixed error handling of qemudSaveCompressionTypeFromString()
When we mount any cgroup without "-o devices", we will fail to start vms:
error: Failed to start domain vm1
error: Unable to deny all devices for vm1: No such file or directory
When we mount any cgroup without "-o cpu", we will fail to get schedinfo:
Scheduler : posix
error: unable to get cpu shares tunable: No such file or directory
We should only use the cgroup controllers which are mounted on host.
So I add virCgroupMounted() for qemuCgroupControllerActive()
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This partly reverts df90ca7661.
Don't disable the VirtualBox driver when configure can't find
VBoxXPCOMC.so, rely on detection at runtime again instead.
Keep --with-vbox=/path/to/virtualbox intact, added to for:
https://bugzilla.redhat.com/show_bug.cgi?id=609185
Detection order for VBoxXPCOMC.so:
1. VBOX_APP_HOME environment variable
2. configure provided location
3. hardcoded list of known locations
4. dynamic linker search path
Also cleanup the glue code and improve error reporting.
fix warning
CC libvirt_util_la-virtaudit.lo
cc1: warnings being treated as errors
util/virtaudit.c: In function 'virAuditEncode':
util/virtaudit.c:146: error: implicit declaration of function 'virAsprintf' [-Wimplicit-function-declaration]
util/virtaudit.c:146: error: nested extern declaration of 'virAsprintf' [-Wnested-externs]
The 2nd and 3rd hunk show the only double-closed file descriptor code part that I found while trying to clean up close(). The first hunk seems a harmless cleanup in that same file.
https://bugzilla.redhat.com/show_bug.cgi?id=638285 - when migrating
a guest, it was very easy to provoke a race where an application
could query block information on a VM that had just been migrated
away. Any time qemu code obtains a job lock, it must also check
that the VM was not taken down in the time where it was waiting
for the lock.
* src/qemu/qemu_driver.c (qemudDomainSetMemory)
(qemudDomainGetInfo, qemuDomainGetBlockInfo): Check that vm still
exists after obtaining job lock, before starting monitor action.
During virtual network startup, the iptables rule that allows tftp
traffic is only added if network->def->tftproot is non-empty, but when
the virtual network is destroyed, we had been unconditionally trying
to delete the rule. This was harmless, except that it created a bogus
error message.
This patch conditionalizes the delete command in the same manner that
the insert command is already conditionalized.
Reordered the bindings into alphabetical order, added a link to
the php-libvirt source on Github, plus gave the direct package
names needed for Python usage on RHEL/Fedora, and Ubuntu.
Commit 9bd3cce0d2 added virFork and
virDriverLoadModule to libvirt_private.syms, but virFork didn't have
a body on Win32 and virDriverLoadModule was already correctly
exported conditional via libvirt_driver_modules.syms.
Add auditing of all initial disk/net assignments to QEMU guests
at startup. Add auditing for all hotplug & unplug events and
disk media changes.
* src/qemu/qemu_driver.c: Add disk/net resource auditing
Add a helper API for ecscaping the value in audit log
messages
* src/util/virtaudit.h, src/util/virtaudit.c,
src/libvirt_private.syms: Add virAuditEncode
Revert most of commit a8b5f9bd27.
The audit hooks will be re-added directly in the QEMU driver code
in a future commit
* daemon/remote.c: Remove all audit logging hooks
* src/qemu/qemu_driver.c: Remove all audit logging hooks
A missing shell was noisy, and the use of command to decipher a
shell's absolute path requires "" rather than ''.
* configure.ac (lv_cv_wrapper_shell): Fix logic errors if candidate
shell is not available.
* .gitignore: Ignore file created when /bin/sh is old dash.
Reported by Matthias Bolte.
* cfg.mk (sc_prohibit_trailing_blank_lines): Delete; this is
adequately covered by maint.mk's sc_prohibit_empty_lines_at_EOF.
* .x-sc_prohibit_empty_lines_at_EOF: New file, to exempt raw
patches.
* Makefile.am (EXTRA_DIST): Include new exemption.
When using 0-prefixed numbers, QEmu will interpret them as octal numbers
(as C convention says); this means that if you attach a device that has
addr > 10 (decimal) you're going to attach a different device.
* tools/virsh.c (opts_freecell, opts_memtune, opts_vcpupin)
(opts_setvcpus, opts_setmaxmem, opts_setmem)
(opts_migrate_setmaxdowntime): Use VSH_OT_INT when only an integer
is expected.
(vshCmddefHelp, vshCmddefGetData): Allow mandatory VSH_OT_INT
arguments.
Older dash mistakenly truncates regular files when using <> redirection;
this kills our use of double dd to reduce storage overhead when
saving qemu images. But qemu insists on running a command through
/bin/sh, so we work around it by having qemu run $sh -c 'real command'
when we have a replacement $sh in mind.
* configure.ac (VIR_WRAPPER_SHELL): Define to a replacement shell,
if /bin/sh is broken on <> redirection.
* src/qemu/qemu_monitor.h (VIR_WRAPPER_SHELL_PREFIX)
(VIR_WRAPPER_SHELL_SUFFIX): New macros.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextMigrateToFile): Use
them.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMigrateToFile):
Likewise.
The default location for the XML catalog file, /etc/xml/catalog,
used when validating the generated html docs, isn't correct for
MacOS X.
This commit adds an option to the configure script, allowing the
default to be overridden:
--with-xml-catalog-file=/path/to/xml/catalog/file
When failing to start a virtual network, we have to cleanup,
tearing down any iptables rules. If the iptables rules were
not present yet though, this raises an error, which squashes
the original error we were handling.
* src/network/bridge_driver.c: When failing to start a virtual
network, don't squash the original error in cleanup
Previously, only the API docs were installed, rather than the
complete documentation set. This commit ensures the complete
documentation set is installed.
With SystemTap 1.0 a part of the generated macros in probes.h
expands to:
volatile __typeof__(((name))) arg2 = (name);
GCC reports an 'invalid initialize' error when name has type
char[]. Therfore, add casts to char* to avoid this.
The network address was being set to 192.168.122.0 instead
of 192.168.122.0/24. Fix this by removing the unneccessary
'network' field from virNetworkDef and just pass the
network address and netmask into the iptables APIs directly.
* src/conf/network_conf.h, src/conf/network_conf.c: Remove
the 'network' field from virNEtworkDef.
* src/network/bridge_driver.c: Update for iptables API changes
* src/util/iptables.c, src/util/iptables.h: Require the
network address + netmask pair to be passed in
* tools/virsh.c: add missing option from the CLI to allows setting
up the NIC model type when attaching an interface
* tools/virsh.pod: extend documentation
* AUTHORS: add Osier Yang to the list
So far, readonly=on option is used when qemu supports -device. However,
there are qemu versions which support readonly option with -drive
although they don't have support for -device.
This 1-liner was actually written by Eric Blake, over IRC. It
addresses a compilation failure in make dist and make rpm for
systems without the dtrace/systemtap development libraries
installed.
The boot server IP address is optional, so it needs to be
checked before attempting to parse it.
* src/conf/network_conf.c: Don't parse NULL ip address for
boot server
Instead of storing the IP address string in virNetwork related
structs, store the parsed virSocketAddr. This will make it
easier to add IPv6 support in the future, by letting driver
code directly check what address family is present
* src/conf/network_conf.c, src/conf/network_conf.h,
src/network/bridge_driver.c: Convert to use virSocketAddr
in virNetwork, instead of char *.
* src/util/bridge.c, src/util/bridge.h,
src/util/dnsmasq.c, src/util/dnsmasq.h,
src/util/iptables.c, src/util/iptables.h: Convert to
take a virSocketAddr instead of char * for any IP
address parameters
* src/util/network.h: Add macros to determine if an address
is set, and what address family is set.
It is useful to know where the client is connecting from,
so include the socket address in probe data.
* daemon/libvirtd.h: Use virSocketAddr for storing client
address and keep printable address handy for logging
* daemon/libvirtd.c: Include socket address in client
connect/disconnect probes
* daemon/probes.d: Add socket address to probes
* examples/systemtap/client.stp: Print socket address
* src/util/network.h: Add sockaddr_un to virSocketAddr union
Adds initial support for dtrace static probes in libvirtd
daemon, assuming use of systemtap dtrace compat shim on
Linux. The probes are inserted for network client connect,
disconnect, TLS handshake states and authentication protocol
states.
This can be tested by running the xample program and then
attempting to connect with any libvirt client (virsh,
virt-manager, etc).
# stap examples/systemtap/client.stp
Client fd=44 connected readonly=0
Client fd=44 auth polkit deny pid:24997,uid:500
Client fd=44 disconnected
Client fd=46 connected readonly=1
Client fd=46 auth sasl allow test
Client fd=46 disconnected
The libvirtd.stp file should also really not be required,
since it is duplicated info that is already available in
the main probes.d definition file. A script to autogenerate
the .stp file is needed, either in libvirtd tree, or better
as part of systemtap itself.
* Makefile.am: Add examples/systemtap subdir
* autobuild.sh: Disable dtrace for mingw32
* configure.ac: Add check for dtrace
* daemon/.gitignore: Ignore generated dtrace probe file
* daemon/Makefile.am: Build dtrace probe header & object
files
* daemon/libvirtd.stp: SystemTAP convenience probeset
* daemon/libvirtd.c: Add connect/disconnect & TLS probes
* daemon/remote.c: Add SASL and PolicyKit auth probes
* daemon/probes.d: Master probe definition
* daemon/libvirtd.h: Add convenience macro for probes
so that compilation is a no-op when dtrace is not available
* examples/systemtap/Makefile.am, examples/systemtap/client.stp
Example systemtap script using dtrace probe markers
* libvirt.spec.in: Enable dtrace on F13/RHEL6
* mingw32-libvirt.spec.in: Force disable dtrace
Add a test suite for check parsing, formatting, range calculation
and netmask checking APIs in virSocketAddr.
* tests/sockettest.c, tests/Makefile.am: Add new test case
All the inet_* functions can be replaced with calls to the
virSocket APIs. Since many of the inet_* funtions are unsafe,
and the remainder are obsolete, forbid all future use of them
in libvirt.
* Makefile.nonreentrant: Ban use of inet_*
The inet_pton and inet_ntop functions are obsolete, replaced
by getaddrinfo+getnameinfo with the AI_NUMERICHOST flag set.
These can be accessed via the virSocket APIs.
The bridge.c code had methods for fetching the IP address of
a bridge which used inet_ntop. Aside from the use of inet_ntop
these methods are broken, because a NIC can have multiple
addresses and this only returns one address. Since the methods
are never used, just remove them.
* src/conf/network_conf.c, src/nwfilter/nwfilter_learnipaddr.c:
Replace inet_pton and inet_ntop with virSocket APIs
* src/util/bridge.c, src/util/bridge.h: Remove unused methods
which called inet_ntop.
The addrToString functionality is now available via the
virSocketFormatAddrFull method.
* daemon/remote.c, src/remote/remote_driver.c: Remove
addrToString methods
The virSocketParse method was not doing any error reporting
which meant the true cause of the problem was lost. Remove
all error reporting from callers, and push it into virSocketParse
* src/util/network.c: Add error reporting to virSocketParse
* src/conf/domain_conf.c, src/conf/network_conf.c,
src/network/bridge_driver.c: Remove error reporting in
callers of virSocketParse
The getnameinfo() function is more flexible than inet_ntop()
avoiding the need to if/else the code based on socket family.
Also make it support UNIX socket addrs and allow inclusion
of a port (service) address. Finally do proper error reporting
via normal APIs.
* src/conf/domain_conf.c, src/nwfilter/nwfilter_ebiptables_driver.c,
src/qemu/qemu_conf.c: Fix error handling with virSocketFormat
* src/util/network.c: Rewrite virSocketFormat to use getnameinfo
and cope with UNIX socket addrs.
The nwIPAddress was simply a wrapper about virSocketAddr.
Just use the latter directly, removing all the extra field
de-references from code & helper APIs for parsing/formatting.
Also remove all the redundant casts from strong types to
void * and then immediately back to strong types.
* src/conf/nwfilter_conf.h: Remove nwIPAddress
* src/conf/nwfilter_conf.c, src/nwfilter/nwfilter_ebiptables_driver.c:
Update to use virSocketAddr and remove void * casts.
There was a typo in the IPv6 path of virSocketCheckNetmask which
caused it to never execute.
* src/util/network.c: s/AF_INET/AF_INET6/ in virSocketCheckNetmask
The virSocketParseAddr function was accepting any AF_* constant
and using that to set the ai_flags field in struct addrinfo.
This is invalid, since address families must go in the ai_family
field of the struct.
* src/util/network.c: Fix handling of address family
* src/conf/network_conf.c, src/network/bridge_driver.c: Pass
AF_UNSPEC instead of relying on it being 0.
Some operations on socket addresses need to know the length of
the sockaddr struct for the particular address family. This
info was being discarded when passing around virSocketAddr
instances. Turn it from a union into a struct containing
union+socklen_t fields, so length is always kept around.
* src/util/network.h: Add socklen_t field to virSocketAddr
* src/util/network.c, src/network/bridge_driver.c,
src/conf/domain_conf.c: Update to take account of new
struct definition.
If getnameinfo() with NI_NUMERICHOST set fails, there are no
grounds to expect inet_ntop to succeed, since these calls
are functionally equivalent. Remove useless inet_ntop code
in the getnameinfo() error path.
* daemon/remote.c, src/remote/remote_driver.c: Remove
calls to inet_ntop
* src/libvirt_private.syms: Sort by header name, then within
header, and drop duplicate virNetworkDefParseNode,
virFileLinkPointsTo and virXPathBoolean.
The QEMU 0.13 release is finally out and from testing in RHEL-6
we know that its JSON and netdev features are now good enough
for us to use by default.
* src/qemu/qemu_conf.c: Enable JSON + netdev for QEMU >= 0.13
There is no point in trying to fill params beyond the first error,
because when qemuDomainGetMemoryParameters returns -1 then the caller
cannot detect which values in params are valid.
This sets the process name to the same value as the Windows title,
but since the name is limited to 16 chars only this is kept as a
configuration option and turned off by default
* src/qemu/qemu.conf src/qemu/qemu_conf.[ch]: hceck for support in the
QEmu help output, add the option in qemu conf file and augment
qemudBuildCommandLine to add it if switched on
* src/qemu/libvirtd_qemu.aug src/qemu/test_libvirtd_qemu.aug: augment
the augeas lenses accordingly
* tests/qemuhelptest.c: cope with the extra flag being detected now
The libvirt_util.la library was mistakenly linked into libvirtd
directly. Since libvirt_util.la is already linked to libvirt.so,
this resulted in libvirtd getting two copies of the code and
more critically 2 copies of static global variables.
Testing in turn exposed a issue with loadable modules. The
gnulib replacement functions are not exported to loadable
modules. Rather than trying to figure out the name sof all
gnulib functions & export them, just linkage all loadable
modules against libgnu.la statically.
* daemon/Makefile.am: Remove linkage of libvirt_util.la
and libvirt_driver.la
* src/Makefile.am: Link driver modules against libgnu.la
* src/libvirt.c: Don't try to load modules which were
compiled out
* src/libvirt_private.syms: Export all other internal
symbols that are required by drivers
A more natural auditing point would perhaps be
SELinuxSetSecurityProcessLabel, but this happens in the child after root
permissions are dropped, so the kernel would refuse the audit record.
Most operations are audited at the libvirtd level; auditing in
src/libvirt.c would result in two audit entries per operation (one in
the client, one in libvirtd).
The only exception is a domain stopping of its own will (e.g. because
the user clicks on "shutdown" inside the interface). There can often be
no client connected at the time the domain stops, so libvirtd does not
have any virConnectPtr object on which to attach an event watch. This
patch therefore adds auditing directly inside the qemu driver (other
drivers are not supported).
Integrate with libaudit.so for auditing of important operations.
libvirtd gains a couple of config entries for auditing. By
default it will enable auditing, if its enabled on the host.
It can be configured to force exit if auditing is disabled
on the host. It will can also send audit messages via libvirt
internal logging API
Places requiring audit reporting can use the VIR_AUDIT
macro to report data. This is a no-op unless auditing is
enabled
* autobuild.sh, mingw32-libvirt.spec.in: Disable audit
on mingw
* configure.ac: Add check for libaudit
* daemon/libvirtd.aug, daemon/libvirtd.conf,
daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config
options to enable auditing
* include/libvirt/virterror.h, src/util/virterror.c: Add
VIR_FROM_AUDIT source
* libvirt.spec.in: Enable audit
* src/util/virtaudit.h, src/util/virtaudit.c: Simple internal
API for auditing messages
The statstest is xen specific. Instead of filling the code with
a huge number of #ifdef WITH_XEN, just make its entire compilation
conditional in the Makefile.am. Also ensure it links to the Xen
driver so that it builds when driver modules are enabled
* tests/Makefile.am: Make statstest xen conditional. Link to
xen driver
* tests/Makefile.am: Remove all conditionals
This patch series focuses on xendConfigVersion 2 (xm_internal) and 3
(xend_internal), but leaves out changes for xenapi drivers.
See this link for more details about vcpu_avail for xm usage.
http://lists.xensource.com/archives/html/xen-devel/2009-11/msg01061.html
This relies on the fact that def->maxvcpus can be at most 32 with xen.
* src/xen/xend_internal.c (xenDaemonParseSxpr)
(sexpr_to_xend_domain_info, xenDaemonFormatSxpr): Use vcpu_avail
when current vcpus is less than maximum.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
* tests/xml2sexprdata/xml2sexpr-pv-vcpus.sexpr: New file.
* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.sexpr: Likewise.
* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.xml: Likewise.
* tests/xmconfigdata/test-paravirt-vcpu.cfg: Likewise.
* tests/xmconfigdata/test-paravirt-vcpu.xml: Likewise.
* tests/xml2sexprtest.c (mymain): New test.
* tests/sexpr2xmltest.c (mymain): Likewise.
* tests/xmconfigtest.c (mymain): Likewise.
* src/qemu/qemu_conf.c (qemuParseCommandLineSmp): Distinguish
between vcpus and maxvcpus, for new enough qemu.
* tests/qemuargv2xmltest.c (mymain): Add new test.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2xmltest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smp.args: New file.
* tools/virsh.c (cmdSetvcpus): Add new flags. Let invalid
commands through to driver, to ease testing of hypervisor argument
validation.
(cmdMaxvcpus, cmdVcpucount): New commands.
(commands): Add new commands.
* tools/virsh.pod (setvcpus, vcpucount, maxvcpus): Document new
behavior.
Although this patch adds a distinction between maximum vcpus and
current vcpus in the XML, the values should be identical for all
drivers at this point. Only in subsequent per-driver patches will
a distinction be made.
In general, virDomainGetInfo should prefer the current vcpus.
* src/conf/domain_conf.h (_virDomainDef): Adjust vcpus to unsigned
short, to match virDomainGetInfo limit. Add maxvcpus member.
* src/conf/domain_conf.c (virDomainDefParseXML)
(virDomainDefFormat): parse and print out vcpu details.
* src/xen/xend_internal.c (xenDaemonParseSxpr)
(xenDaemonFormatSxpr): Manage both vcpu numbers, and require them
to be equal for now.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
* src/phyp/phyp_driver.c (phypDomainDumpXML): Likewise.
* src/openvz/openvz_conf.c (openvzLoadDomains): Likewise.
* src/openvz/openvz_driver.c (openvzDomainDefineXML)
(openvzDomainCreateXML, openvzDomainSetVcpusInternal): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxDomainDefineXML):
Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainDumpXML): Likewise.
* src/xenapi/xenapi_utils.c (createVMRecordFromXml): Likewise.
* src/esx/esx_vmx.c (esxVMX_ParseConfig, esxVMX_FormatConfig):
Likewise.
* src/qemu/qemu_conf.c (qemuBuildSmpArgStr)
(qemuParseCommandLineSmp, qemuParseCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemudDomainHotplugVcpus): Likewise.
* src/opennebula/one_conf.c (xmlOneTemplate): Likewise.
Note - this wrapping is completely mechanical; the old API will
function identically, since the new API validates that the exact
same flags are provided by the old API. On a per-driver basis,
it may make sense to have the old API pass a different set of flags,
but that should be done in the per-driver patch that implements
the full range of flag support in the new API.
* src/esx/esx_driver.c (esxDomainSetVcpus, escDomainGetMaxVpcus):
Move guts...
(esxDomainSetVcpusFlags, esxDomainGetVcpusFlags): ...to new
functions.
(esxDriver): Trivially support the new API.
* src/openvz/openvz_driver.c (openvzDomainSetVcpus)
(openvzDomainSetVcpusFlags, openvzDomainGetMaxVcpus)
(openvzDomainGetVcpusFlags, openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDomainSetCPU)
(phypDomainSetVcpusFlags, phypGetLparCPUMAX)
(phypDomainGetVcpusFlags, phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemudDomainSetVcpus)
(qemudDomainSetVcpusFlags, qemudDomainGetMaxVcpus)
(qemudDomainGetVcpusFlags, qemuDriver): Likewise.
* src/test/test_driver.c (testSetVcpus, testDomainSetVcpusFlags)
(testDomainGetMaxVcpus, testDomainGetVcpusFlags, testDriver):
Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainSetVcpus)
(vboxDomainSetVcpusFlags, virDomainGetMaxVcpus)
(virDomainGetVcpusFlags, virDriver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainSetVcpus)
(xenUnifiedDomainSetVcpusFlags, xenUnifiedDomainGetMaxVcpus)
(xenUnifiedDomainGetVcpusFlags, xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainSetVcpus)
(xenapiDomainSetVcpusFlags, xenapiDomainGetMaxVcpus)
(xenapiDomainGetVcpusFlags, xenapiDriver): Likewise.
(xenapiError): New helper macro.
Factors common checks (such as nonzero vcpu count) up front, but
drivers will still need to do additional flag checks.
* src/libvirt.c (virDomainSetVcpusFlags, virDomainGetVcpusFlags):
New functions.
(virDomainSetVcpus, virDomainGetMaxVcpus): Refer to new API.
API agreed on in
https://www.redhat.com/archives/libvir-list/2010-September/msg00456.html,
but modified for enum names to be consistent with virDomainDeviceModifyFlags.
* include/libvirt/libvirt.h.in (virDomainVcpuFlags)
(virDomainSetVcpusFlags, virDomainGetVcpusFlags): New
declarations.
* src/libvirt_public.syms: Export new symbols.
Syntax agreed on in
https://www.redhat.com/archives/libvir-list/2010-September/msg00476.html
<domain ...>
<vcpu current='x'>y</vcpu>
...
can now be used to specify 1 <= x <= y current vcpus, in relation
to the boot-time max of y vcpus. If current is omitted, then
current and max are assumed to be the same value.
* docs/schemas/domain.rng: Add new attribute.
* docs/formatdomain.html.in: Document it.
* tests/qemuxml2argvdata/qemuxml2argv-smp.xml: Add to
domainschematest.
* tests/xml2sexprdata/xml2sexpr-pv-vcpus.xml: Likewise.
In the table built for traffic coming from the VM going to the host make the following changes:
- don't ACCEPT the packets but do a 'RETURN' and let the host-specific firewall rules in subsequent rules evaluate whether the traffic is allowed to enter
- use the '-m state' in the rules as everywhere else
ESX(i) uses UTF-8, but a Windows based GSX server writes
Windows-1252 encoded VMX files.
Add a test case to ensure that libxml2 provides Windows-1252
to UTF-8 conversion.
Since bugs due to double-closed file descriptors are difficult to track down in a multi-threaded system, I am introducing the VIR_CLOSE(fd) macro to help avoid mistakes here.
There are lots of places where close() is being used. In this patch I am only cleaning up usage of close() in src/conf where the problems were.
I also dare to declare close() as being deprecated in libvirt code base (HACKING).
Over root-squashing nfs, when virFileOperation() is called as uid==0,
it may fail with EACCES, but also with EPERM, due to
virFileOperationNoFork()'s failed attemp to chown a writable file.
qemudDomainSaveFlag() should expect this case, too.
qemudOpenAsUID is intended to open a file with the credentials of a
specified uid. Current implementation fails if the file is accessible to
one of uid's groups but not owned by uid.
This patch replaces the supplementary group list that the child process
inherited from libvirtd with the default group list of uid.
* docs/formatdomain.html.in: Add memtune element details, added min_guarantee
* src/libvirt.c: Update virDomainGetMemoryParameters api description, make
it more clear that the user first needs to call the api to get the number
of parameters supported and then call again to get the values.
* tools/virsh.pod: Add usage of new command memtune in virsh manpage
Vdsm needs to communicate with its guest agent via unix domain socket,
which qemu creates due to the following domain xml device:
<channel type='unix'>
<target type='virtio' name='com.redhat.rhevm.vdsm'/>
<source mode='bind' path='/var/lib/libvirt/qemu/channels/fcp-xp-1.com.redhat.rhevm.vdsm'/>
</channel>
The location of the socket below /var/lib/libvirt/qemu/channels makes
sense, to humans and selinux policy alike. However, that socket should
be accessible to vdsm, too.
Due to other (storage) reasons, vdsm is to join the "qemu" group. With
this patch, vdsm can look below /var/lib/libvirt/qemu and connect to the
socket.
The socket itself should be chmod'ed to allow qemu group read/write, but
that's for another project.
BZ#643407
* tools/virsh.c (vshCmdOptType): Add VSH_OT_ARGV. Delete
unused VSH_OT_NONE.
(vshCmddefGetData): Special case new opt flag.
(vshCmddefHelp): Display help for argv.
(vshCommandOptArgv): New function.
https://bugzilla.redhat.com/show_bug.cgi?id=623903 documents a qemu
bug that causes libvirt to hang if virt-manager happens to be
querying balloon info when a guest is paused. Until the qemu bug
is fixed, people need to know how to avoid the issue.
* docs/formatdomain.html.in (Memory balloon device): Mention
model='none'.
This introduces new attribute to filesystem element
to support customizable access mode for mount type.
Valid accessmode are: passthrough, mapped and squash.
Usage:
<filesystem type='mount' accessmode='passthrough'>
<source dir='/export/to/guest'/>
<target dir='mount_tag'/>
</filesystem>
passthrough is the default model if not specified, that's
also the current behaviour.
The following filter transition from a filter allowing incoming TCP connections
<rule action='accept' direction='in' priority='401'>
<tcp/>
</rule>
<rule action='accept' direction='out' priority='500'>
<tcp/>
</rule>
to one that does not allow them
<rule action='drop' direction='in' priority='401'>
<tcp/>
</rule>
<rule action='accept' direction='out' priority='500'>
<tcp/>
</rule>
did previously not cut off existing (ssh) connections but only prevented newly initiated ones. The attached patch allows to cut off existing connections as well, thus enforcing what the filter is showing.
I had only tested with a configuration where the physical interface is connected to the bridge where the filters are applied. This patch now also solves a filtering problem where the physical interface is not connected to the bridge, but the bridge is given an IP address and the host routes between bridge and physical interface. Here the filters drop non-allowed traffic on the outgoing side on the host.
* .gnulib: Update to latest, for termios fix.
* configure.ac (AC_CHECK_HEADERS): Drop redundent check.
* bootstrap: Synchronize from upstream.
Reported by Daniel P. Berrange.
Explicitly raising a nice error in the case user tries to migrate a
guest with assigned host devices is much better than waiting for a
mysterious error with no clue for the reason.
When only some host CPUs given to cpuBaseline contain <vendor> element,
baseline CPU should not contain it. Otherwise the result would not be
compatible with the host CPUs without vendor. CPU vendors are still
taken into account when computing baseline CPU, it's just removed from
the result.
Recent CPU models were specified using invalid vendor element
<vendor>NAME</vendor>, which was silently ignored due to a bug in the
code which was parsing it.
'make -C src rpcgen' is supposed to be idempotent. But commit
f928f43b7b mistakently manually edited a generated file rather
than fixing the upstream file.
* src/remote/remote_protocol.x (remote_memory_param_value): Use
correct spelling of enum values.
* src/remote/remote_protocol.c: Regenerate.
This enables support for nested SVM using the regular CPU
model/features block. If the CPU model or features include
'svm', then the '-enable-nesting' flag will be added to the
QEMU command line. Latest out of tree patches for nested
'vmx', no longer require the '-enable-nesting' flag. They
instead just look at the cpu features. Several of the models
already include svm support, but QEMU was just masking out
the svm bit silently. So this will enable SVM on such
models
* src/qemu/qemu_conf.h: flag for -enable-nesting
* src/qemu/qemu_conf.c: Use -enable-nesting if VMX or SVM are in
the CPUID
* src/cpu/cpu.h, src/cpu/cpu.c: API to check for a named feature
* src/cpu/cpu_x86.c: x86 impl of feature check
* src/libvirt_private.syms: Add cpuHasFeature
* src/qemuhelptest.c: Add nesting flag where required
Before running each test case clear the thread local error
indicator. After running each test case, dispatch any error
that was reported
* tests/testutils.c: Fix error reporting in test suites
The TODO list changes frequently so cannot be well maintained
under GIT. Update the TODO file to point people at bugzilla
and the libvirt website
* TODO: Point at bugzilla/website
* src/xen/sexpr.c: Ensure () are escaped in sexpr2string
* tests/sexpr2xmldata/sexpr2xml-boot-grub.sexpr,
tests/sexpr2xmldata/sexpr2xml-boot-grub.xml,
tests/xml2sexprdata/xml2sexpr-boot-grub.sexpr,
tests/xml2sexprdata/xml2sexpr-boot-grub.xml: Data files to
check escaping
* tests/sexpr2xmltest.c, tests/xml2sexprtest.c: Add boot-grub
escaping test case
This is from a bug report and conversation on IRC where Soren reported that while a filter update is occurring on one or more VMs (due to a rule having been edited for example), a deadlock can occur when a VM referencing a filter is started.
The problem is caused by the two locking sequences of
qemu driver, qemu domain, filter # for the VM start operation
filter, qemu_driver, qemu_domain # for the filter update operation
that obviously don't lock in the same order. The problem is the 2nd lock sequence. Here the qemu_driver lock is being grabbed in qemu_driver:qemudVMFilterRebuild()
The following solution is based on the idea of trying to re-arrange the 2nd sequence of locks as follows:
qemu_driver, filter, qemu_driver, qemu_domain
and making the qemu driver recursively lockable so that a second lock can occur, this would then lead to the following net-locking sequence
qemu_driver, filter, qemu_domain
where the 2nd qemu_driver lock has been ( logically ) eliminated.
The 2nd part of the idea is that the sequence of locks (filter, qemu_domain) and (qemu_domain, filter) becomes interchangeable if all code paths where filter AND qemu_domain are locked have a preceding qemu_domain lock that basically blocks their concurrent execution
So, the following code paths exist towards qemu_driver:qemudVMFilterRebuild where we now want to put a qemu_driver lock in front of the filter lock.
-> nwfilterUndefine() [ locks the filter ]
-> virNWFilterTestUnassignDef()
-> virNWFilterTriggerVMFilterRebuild()
-> qemudVMFilterRebuild()
-> nwfilterDefine()
-> virNWFilterPoolAssignDef() [ locks the filter ]
-> virNWFilterTriggerVMFilterRebuild()
-> qemudVMFilterRebuild()
-> nwfilterDriverReload()
-> virNWFilterPoolLoadAllConfigs()
->virNWFilterPoolObjLoad()
-> virNWFilterPoolAssignDef() [ locks the filter ]
-> virNWFilterTriggerVMFilterRebuild()
-> qemudVMFilterRebuild()
-> nwfilterDriverStartup()
-> virNWFilterPoolLoadAllConfigs()
->virNWFilterPoolObjLoad()
-> virNWFilterPoolAssignDef() [ locks the filter ]
-> virNWFilterTriggerVMFilterRebuild()
-> qemudVMFilterRebuild()
Qemu is not the only driver using the nwfilter driver, but also the UML driver calls into it. Therefore qemuVMFilterRebuild() can be exchanged with umlVMFilterRebuild() along with the driver lock of qemu_driver that can now be a uml_driver. Further, since UML and Qemu domains can be running on the same machine, the triggering of a rebuild of the filter can touch both types of drivers and their domains.
In the patch below I am now extending each nwfilter callback driver with functions for locking and unlocking the (VM) driver (UML, QEMU) and introduce new functions for locking all registered callback drivers and unlocking them. Then I am distributing the lock-all-cbdrivers/unlock-all-cbdrivers call into the above call paths. The last shown callpath starting with nwfilterDriverStart() is problematic since it is initialize before the Qemu and UML drives are and thus a lock in the path would result in a NULL pointer attempted to be locked -- the call to virNWFilterTriggerVMFilterRebuild() is never called, so we never lock either the qemu_driver or the uml_driver in that path. Therefore, only the first 3 paths now receive calls to lock and unlock all callback drivers. Now that the locks are distributed where it matters I can remove the qemu_driver and uml_driver lock from qemudVMFilterRebuild() and umlVMFilterRebuild() and not requiring the recursive locks.
For now I want to put this out as an RFC patch. I have tested it by 'stretching' the critical section after the define/undefine functions each lock the filter so I can (easily) concurrently execute another VM operation (suspend,start). That code is in this patch and if you want you can de-activate it. It seems to work ok and operations are being blocked while the update is being done.
I still also want to verify the other assumption above that locking filter and qemu_domain always has a preceding qemu_driver lock.
This makes 'virsh --conn test:///default help help' work right;
previously, the abbreviation confused our hand-rolled option parsing.
* tools/virsh.c (vshParseArgv): Use getopt_long feature, rather
than (incorrectly) reparsing options ourselves.
Some users may type command like this at the virsh shell:
virsh # somecmd 'some arg'
because they often use single quote in linux shell.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Old virsh command parsing mashes all the args back into a string and
miss the quotes, this patches fix it. It is also needed for introducing
qemu-monitor-command which is very useful.
This patches uses the new vshCommandParser abstraction and adds
vshCommandArgvParse() for arguments vector, so we don't need
to mash arguments vector into a command sting.
And the usage was changed:
old:
virsh [options] [commands]
new:
virsh [options]... [<command_string>]
virsh [options]... <command> [args...]
So we still support commands like:
"define D.xml; dumpxml D" was parsed as a commands-string.
and support commands like:
we will not mash them into a string, we use new argv parser for it.
But we don't support the command like:
"define D.xml; dumpxml" was parsed as a command-name, but we have no such command-name.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
add vshCommandParser and make vshCommandParse() accept different
parsers.
the current code for parse command string is integrated as
vshCommandStringParse().
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
in old code the following commands are equivalent:
virsh # dumpxml --update-cpu=vm1
virsh # dumpxml --update-cpu vm1
because the old code split the option argument into 2 parts:
--update-cpu=vm1 is split into update-cpu and vm1,
and update-cpu is a boolean option, so the parser takes vm1 as another
argument, very strange.
after this patch applied, the first one will become illegal.
To achieve this, we don't parse/check options when parsing command sting,
but check options when parsing a command argument. And the argument is
not split when parsing command sting.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
* tools/virsh.c (malloc, calloc, realloc, strdup): Enforce that
within this file, we use the safe vsh wrappers instead.
(cmdNodeListDevices, cmdSnapshotCreate, main): Fix violations of
this policy.
In origin code, double quote is only allowed at the begin or end
"complicated argument"
--some_opt="complicated string" (we split this argument into 2 parts,
option and data, the data is "complicated string").
This patch makes it allow double quote at any position of
an argument:
complicated" argument"
complicated" "argument
--"some opt=complicated string"
This patch is also needed for the following patches,
the following patches will not split option argument into 2 parts,
so we have to allow double quote at any position of an argument.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
* include/libvirt/libvirt.h.in: some of the function type description
were broken so they could not be automatically documented
* src/util/event.c docs/apibuild.py: event.c exports one public API
so it needs to be scanned too, avoid a few warnings
Make use of the existing <filesystem> element to support plan9fs
filesystem passthrough in the QEMU driver
<filesystem type='mount'>
<source dir='/export/to/guest'/>
<target dir='/import/from/host'/>
</filesystem>
NB, the target is not actually a directory, it is merely a arbitrary
string tag that is exported to the guest as a hint for where to mount
it.
Add proper documentation to the new VIR_DOMAIN_MEMORY_* macros in
libvirt.h.in to placate apibuild.py.
Mark args as unused in for libvirt_virDomain{Get,Set}MemoryParameters
in the Python bindings and add both to the libvirtMethods array.
Update remote_protocol-structs to placate make syntax-check.
Undo unintended modifications in vboxDomainGetInfo.
Update the function table of the VirtualBox and XenAPI drivers.
The command helps to control the memory/swap parameters for the system, for
eg. hard_limit (max memory the vm can use), soft_limit (limit during memory
contention), swap_hard_limit(max swap the vm can use)
Adding parsing code for memory tunables in the domain xml file
also change the internal define structures used for domain memory
informations
Adds a new specific test
Public api to set/get memory tunables supported by the hypervisors.
dv:
* some cleanups in libvirt.c
* adding extra checks in libvirt.c new entry points
v4:
* Move exporting public API to this patch
* Add unsigned int flags to the public api for future extensions
v3:
* Add domainGetMemoryParamters and NULL in all the driver interface
v2:
* Initialize domainSetMemoryParameters to NULL in all the driver
interface structure.
This patch adds a structure virMemoryParameter, it contains the name of
the
parameter and the type of the parameter along with a union.
dv:
+ rename enums to VIR_DOMAIN_MEMORY_PARAM_*
+ remove some extraneous tabs
v4:
+ Add unsigned int flags to the public api for future extensions
v3:
+ Protoype for virDomainGetMemoryParameters and dummy python binding.
v2:
+ Includes dummy python bindings for the library to build cleanly.
+ Define string constants like "hard_limit", etc.
+ re-order this patch.
Some features provided by the recently added CPU models were mentioned
twice for each model. This was a result of automatic generation of the
XML from qemu's CPU configuration file without noticing this redundancy.
To enable the CPU XML from the capabilities to be pasted directly
into the guest XML with no editing, pick a sensible default for
match and feature policy. The CPU match will be exact and the
feature policy will be require. This should ensure safety for
migration and give DWIM semantics for users
* src/conf/cpu_conf.c: Default to exact match and require policy
* docs/formatdomain.html.in: Document new defaults
This adds a script to generate the todo item page from
bugzilla. This requires a valid username+password for
bugzilla, so it is intended that this only be run on
the libvirt.org website via cron. Normal usage will just
generate an empty stub page.
* docs/todo.pl: Script to extract todo items from bugzilla
* docs/todo.cfg-example: Example config file
* docs/sitemap.html.in: Add todo page
* docs/Makefile.am: Generation rules for todo items
According to API documentation virDomain{At,De}tachDevice calls are
supposed to only work on active guests for device hotplug. For anything
beyond that, their *Flags variants have to be used.
Despite the variant which was acked on libvirt mailing list
(https://www.redhat.com/archives/libvir-list/2010-January/msg00385.html)
commit ed9c14a7ef (by Jim Fehlig)
introduced automagic behavior of these API calls for xen driver. Since
January, these calls always change persistent configuration of a guest
and if the guest is currently active, they also hot(un)plug the device.
That change didn't follow API documentation and also broke device
hot(un)plug for older xend implementations which do not support changing
persistent configuration of a guest and hot(un)plugging in one step.
This patch should not break anything for active guests. On the other
hand, changing inactive guests is not supported any more.
When a user calls to virDomain{Attach,Detach,Update}DeviceFlags() with
flags == VIR_DOMAIN_DEVICE_MODIFY_LIVE on an inactive guest running on
an old Xen hypervisor (such as RHEL-5) xend_internal driver reports:
Xend version does not support modifying persistent config
which is pretty confusing since no-one requested to modify persistent
config.
This patch adds another example to the nwfilter html page and provides 2 solutions for how to write a filter meeting the given requirements using newly added features.
This patch adds a test case for testing the XML parser's and instantiator's
support of the state attribute. The other test case tests existing
capabilities. Both test cases will be used in TCK again.
In this patch I am extending the rule instantiator to create the state
match according to the state attribute in the XML. Only one iptables
rule in the incoming or outgoing direction will be created for a rule
in direction 'in' or 'out' respectively. A rule in direction 'inout' does
get iptables rules in both directions.
* .gnulib: Update to latest, for bootstrap fixes.
* bootstrap: Synchronize with upstream.
* bootstrap.conf: Add pkg-config pre-requisite.
* autogen.sh: Tweak wording message.
Reported by Justin Clift, and with feedback from Bruno Haible.
The xm internal xen driver only supports disk and network devices to be
added to a guest. On an attempt to attach any other device the xm driver
used VIR_ERR_XML_ERROR which resulted in a completely bogus error
message:
error: Failed to attach device from pci.xml
error: XML description for unknown device is not well formed or invalid
Disabling these two drivers on MacOS X, where they are known to
not work, allows libvirt (including the daemon) to compile without
any further changes.
Since version 4.1 ESX(i) can expose virtual serial devices over TCP.
Add support in the VMX handling code for this, add test cases to cover
it and add links to some documentation.
ESX supports two additional protocols: TELNETS and TLS. Add them to
the list of serial-over-TCP protocols.
The <vcpu cpuset=...> attribute has been available since commit
e193b5dd, but without documentation or RNG validation.
* docs/schemas/domain.rng (vcpu): Further validate cpuset.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.c: Fix typos.
Description: Implement AppArmorSetSecurityHostdevLabel() and
AppArmorRestoreSecurityHostdevLabel() for hostdev and pcidev attach.
virt-aa-helper also has to be adjusted because *FileIterate() is used for pci
and usb devices and the corresponding XML for hot attached hostdev and pcidev
is not in the XML passed to virt-aa-helper. The new '-F filename' option is
added to append a rule to the profile as opposed to the existing '-f
filename', which rewrites the libvirt-<uuid>.files file anew. This new '-F'
option will append a rule to an existing libvirt-<uuid>.files if it exists,
otherwise it acts the same as '-f'.
load_profile() and reload_profile() have been adjusted to add an 'append'
argument, which when true will use '-F' instead of '-f' when executing
virt-aa-helper.
All existing calls to load_profile() and reload_profile() have been adjusted
to use the old behavior (ie append==false) except AppArmorSetSavedStateLabel()
where it made sense to use the new behavior.
This patch also adds tests for '-F'.
Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/640993
In this patch I am extending the rule instantiator to create the comment
node where supported, which is the case for iptables and ip6tables.
Since commands are written in the format
cmd='iptables ...-m comment --comment \"\" '
certain characters ('`) in the comment need to be escaped to
prevent comments from becoming commands themselves or cause other
forms of (bash) substitutions. I have tested this with various input and in
my tests the input made it straight into the comment. A test case for TCK
will be provided separately that tests this.
Partial reversion of commit 76d87a59, now that bootstrap is smarter.
* .gnulib: Update to latest, for poll and bootstrap fixes.
* bootstrap: Resync from gnulib.
* autogen.sh: Drop redundant tool checks; bootstrap does them
better, by honoring environment variables.
* examples/domain-events/events-c/Makefile.am (INCLUDES)
(event_test_LDADD): Use gnulib library during build.
* bootstrap.conf (gnulib_tool_option_extras): Revert --libtool
addition, now that updated bootstrap does it for us.
Reported by Justin Clift.
When creating a new gust, the function phypBuildLpar() was not
checking for NULL values
src/phyp/phyp_driver.c: check the definition arguments to avoid a segmentation
fault in phypBuildLpar()
This fixes a small logic bug, where passing --without-macvtap
on the configure line, or otherwise indicating a lack of
support for macvtap, causes configure to bail.
The configure script was breaking on MacOS X unless passed:
--without-storage-mpath
This patch leverages Stefan Bergers earlier work for nwfilter,
so non-linux systems don't even attempt to build multipath.
In this patch I am reworking the logic around detecting virtual port support and requiring the libnl dependency.
- It requires --with-macvtap and displays an error in case of --without-macvtap --with-virtualport.
- It tests for availability of certain data in include files and displays an error in case the include file is not at the correct level and --with-virtualport was chosen
- displays 'checking' messages for macvtap and virtualport support and results
- libnl support is required when macvtap is found or requested; if libnl is not there, please supply without-macvtap
Prior to this patch, the ChangeLog generation was hard coded to use
"awk", when it should have been using the AWK variable set by our
build system.
This breaks compilation on a newly installed OS X system, where the
default path has the Mac (non GNU) awk in the default search PATH
before any installed GNU awk (gawk).
This reverses commit 04c3704, which added a define to nwfilter to
allow libvirtd compilation on Mac OS X. Stefan Bergers commit, 2e7294d,
is the proper solution, removing the requirement for nwfilter on non-Linux.
Mac OS X provides an "/Applications" folder, not an "/Application" folder,
so installed VirtualBox wasn't being detected by default.
This 1 character patch fixes this.
The patch below reports a warning in the log if the generated ip(6)tables rules would not be effective due to the proc filesystem entries
/proc/sys/net/bridge/bridge-nf-call-iptables
/proc/sys/net/bridge/bridge-nf-call-ip6tables
containing a '0'. The warning tells the user what to do. I am rate-limiting the warning message to appear only every 10 seconds.
Description: Check for VIR_DOMAIN_CHR_TYPE in serial ports and add 'rw' for
defined serial ports, parallel ports and channels
Bug-Ubuntu: LP: #578527, LP: #609055
pciFindStubDriver currently returns 0 in one of the error cases.
While it's correct...NULL is more readable.
Signed-off-by: Chris Wright <chrisw@redhat.com>
libvirt-guests init script should be started as late as possible during
host startup and stopped as early as possible during host shutdown to
make sure required services are already/still up and running at the time
libvirt-guests runs.
The addrToString methods were not coping with UNIX domain sockets
which have no normal host+port address. Hardcode special handling
for these so that SASL routines can work over UNIX sockets. Also
fix up SSF logic in remote client so that it presumes that a UNIX
socket is secure
* daemon/remote.c: Fix addrToString for UNIX sockets.
* src/remote/remote_driver.c: Fix addrToString for UNIX sockets
and fix SSF logic to work for TLS + UNIX sockets in the same
manner
Refactor some daemon code to facilitate the introductioin of static
probes, sanitizing function exit paths in many places
* daemon/libvirtd.c: Pass the dname string into remoteCheckDN
to let caller deal with failure paths. Add separate exit paths
to remoteCheckCertificate for auth failure vs denial. Merge
all exit paths in qemudDispatchServer to one cleanup block
* daemon/remote.c: Add separate exit paths to SASL & PolicyKit
functions for auth failure vs denial
Before this patch, the testsuite was noisy:
TEST: qemuargv2xmltest
........................................ 40
................20:41:28.046: warning : qemuParseCommandLine:6565 : unknown QEMU argument '-unknown', adding to the qemu namespace
20:41:28.046: warning : qemuParseCommandLine:6565 : unknown QEMU argument 'parameter', adding to the qemu namespace
. 57 OK
PASS: qemuargv2xmltest
It's not a real failure (which is why the test was completing
successfully), so much as an intentional warning to the user that use
of the qemu namespace has the potential for undefined effects that
leaked through the default logging behavior. After this patch series,
all tests can access any logged data, and this particular test can
explicitly check for the presence or absence of the warning, such that
the test output becomes:
TEST: qemuargv2xmltest
........................................ 40
................. 57 OK
PASS: qemuargv2xmltest
* tests/testutils.h (virtTestLogContentAndReset): New prototype.
* tests/testutils.c (struct virtTestLogData): New struct.
(virtTestLogOutput, virtTestLogClose, virtTestLogContentAndReset):
New functions.
(virtTestMain): Always capture log data emitted during tests.
* tests/qemuargv2xmltest.c (testCompareXMLToArgvHelper, mymain):
Use flag to mark which tests expect noisy stderr.
(testCompareXMLToArgvFiles): Add parameter to test whether stderr
was appropriately silent.
Tweaked the PolicyKit documentation improvement patch submitted
by Patrick Dignan.
Additionally, removed the reference to PolicyKit.conf, which is
no longer used by PolicyKit, plus added a link to the expanded
PolicyKit example page on the wiki.
I got tired of seeing this.
config.status: executing libtool commands
/bin/rm: cannot remove `libtoolT': No such file or directory
config.status: executing po-directories commands
While I was at it, there were a couple other unused variables.
* configure.ac (RM, MV, TAR): Drop; nothing in libvirt directly uses
this, and assigning RM interferes with libtool.
When nwfilter support was added to UML, I didn't realise the UML driver
needed instrumentation to make updating nwfilters on the fly work. This
patch adds this bit of glue.
Signed-off-by: Soren Hansen <soren@linux2go.dk>
cmdAttachInterface and cmdAttachDisk still used vshRealloc and sprintf
for generating XML, which is hardly maintainable. Let's get rid of this
old code.
* src/Makefile.am (libvirt.def, libvirt_qemu.def): '\}' and '\t'
are not required by POSIX. Use '}' and literal tab instead.
(install-data-local): Avoid sed -i.
* tests/read-bufsiz: Likewise.
Reported by Mitchell Hashimoto.
Added a workable initial page for the libvirt Application
Development Guide, giving the online viewable options +
the available download ones (pdf, epub, srpm).
Added a link to the PDF to the main Downloads page, plus
neatened the html tags throughout the page as they
were a bit of a mess.
Added --enable-compile-warnings=error to the autogen line,
as suggested by Eric Blake.
2010-09-11 01:36:38 +10:00
1209 changed files with 858581 additions and 588285 deletions
and resulted in several rounds of improvements before coding
began. In turn, this example is slightly rearranged from the actual
order of the commits.
</p>
<p>
@@ -46,11 +57,22 @@
<li>define the public API</li>
<li>define the internal driver API</li>
<li>implement the public API</li>
<li>define the wire protocol format</li>
<li>implement the RPC client</li>
<li>implement the server side dispatcher</li>
<li>implement the driver methods</li>
<li>implement the remote protocol:
<ol>
<li>define the wire protocol format</li>
<li>implement the RPC client</li>
<li>implement the server side dispatcher</li>
</ol>
</li>
<li>use new API where appropriate in drivers</li>
<li>add virsh support</li>
<li>add common handling for new API</li>
<li>for each driver that can support the new API:
<ol>
<li>add prerequisite support</li>
<li>fully implement new API</li>
</ol>
</li>
</ol>
<p>
@@ -66,11 +88,10 @@
functionality--get the whole thing working and make sure you're happy
with it. Then use git or some other version control system that lets
you rewrite your commit history and break patches into pieces so you
don't drop a big blob of code on the mailing list at one go. For
example, I didn't follow my own advice when I originally submitted the
example code to the libvirt list but rather submitted it in several
large chunks. I've used git's ability to rewrite my commit history to
break the code apart into the example patches shown.
don't drop a big blob of code on the mailing list in one go.
Also, you should follow the upstream tree, and rebase your
series to adapt your patches to work with any other changes
that were accepted upstream during your development.
</p>
<p>
@@ -86,9 +107,24 @@
<h2><aname='publicapi'>Defining the public API</a></h2>
<p>The first task is to define the public API and add it to:</p>
<p>The first task is to define the public API. If the new API
involves an XML extension, you have to enhance the RelaxNG
schema and document the new elements or attributes:</p>
<p><code>include/libvirt/libvirt.h.in</code></p>
<p><code>
docs/schemas/domain.rng<br/>
docs/formatdomain.html.in
</code></p>
<p>If the API extension involves a new function, you have to add a
declaration in the public header, and arrange to export the
function name (symbol) so other programs can link against the
libvirt library and call the new function:</p>
<p><code>
include/libvirt/libvirt.h.in
src/libvirt_public.syms
</code></p>
<p>
This task is in many ways the most important to get right, since once
@@ -99,12 +135,9 @@
rework it as you go through the process of implementing it.
</p>
<p>Once you have defined the API, you have to add the symbol names to:</p>
<p><code>src/libvirt_public.syms</code></p>
<pclass="example">See <ahref="api_extension/0001-Step-1-of-8-Define-the-public-API.patch">0001-Step-1-of-8-Define-the-public-API.patch</a> for example code.</p>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
