IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We document steps how to fix images if they are rejected for missing
the 'backing file format' field. Document also how to securely probe
the image format if it's unknown.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The default memlock limit is 64k which is not enough to start a single
VM. The requirements for one VM are 12k, 8k for eBPF map and 4k for eBPF
program, however, it fails to create eBPF map and program with 64k limit.
By testing I figured out that the minimal limit is 80k to start a single
VM with functional eBPF and if I add 12k I can start another one.
This leads into following calculation:
80k as memlock limit worked to start a VM with eBPF which means there
is 68k of lock memory that I was not able to figure out what was using
it. So to get a number for 4096 VMs:
68 + 12 * 4096 = 49220
If we round it up we will get 64M of memory lock limit to support 4096
VMs with default map size which can hold 64 entries for devices.
This should be good enough as a sane default and users can change it if
the need to.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1807090
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Whenever there is a guest CPU configured in domain XML, we will call
some CPU driver APIs to validate the CPU definition and check its
compatibility with the hypervisor. Thus domains with guest CPU
specification can only be started if the guest architecture is supported
by the CPU driver. But we would add a default CPU to any domain as long
as QEMU reports it causing failures to start any domain on affected
architectures.
https://bugzilla.redhat.com/show_bug.cgi?id=1805755
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow format probing to work around lazy clients which did not specify
their format in the overlay. Format probing will be allowed only, if we
are able to probe the image, the probing result was successful and the
probed image does not have any backing or data file.
This relaxes the restrictions which were imposed in commit 3615e8b39b
in cases when we know that the image probing will not result in security
issues or data corruption.
We perform the image format detection and in the case that we were able
to probe the format and the format does not specify a backing store (or
doesn't support backing store) we can use this format.
With pre-blockdev configurations this will restore the previous
behaviour for the images mentioned above as qemu would probe the format
anyways. It also improves error reporting compared to the old state as
we now report that the backing chain will be broken in case when there
is a backing file.
In blockdev configurations this ensures that libvirt will not cause data
corruption by ending the chain prematurely without notifying the user,
but still allows the old semantics when the users forgot to specify the
format.
Users thus don't have to re-invent when image format detection is safe
to do.
The price for this is that libvirt will need to keep the image format
detector still current and working or replace it by invocation of
qemu-img.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While our code can detect ISO as a separate format, qemu does not use it
as such and just passes it through as raw. Add conversion for detected
parts of the backing chain so that the validation code does not reject
it right away.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that this file no longer transitively includes
domain_conf.h, it can be included here.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Make the header easier to read and let the compiler inline
what it wants.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is pulled in via domain_conf.h somehow, but it is directly used.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This file uses the virNetDevBandwidth*Floor helpers
without including the correct include,
relying on virnetworkportdef.h to include it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 17f430eb5c
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The ParseNode function takes arguments with types
from libxml.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The network port XML files were not including any usage of vlan
tags or port options, and one of the files was not even processed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are a lots of strings being handled inside some LXC functions.
They can be moved to g_autofree to avoid declaring a return value to get
proper code cleanups. This commit is changing functions from
lxc_{controller,cgroup,fuse} only.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Ever since commit c5a00350 the libxl parser invokes the emulator
to probe which device model to use.
Commit b90c4b5 introduced a workaround that used a stable path
which was very likely to result in the answer matching the default.
However the test is still affected by the host state and the binary
gets invoked if present.
Mock the libxlDomainGetEmulatorType function to stop wasting CPU
cycles every time a 'make check' is run on a system with xen installed.
For example xlconfigtest gets faster by 90 %
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: b90c4b5f50
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Take the parts affected by the host state out of DriverConfigNew
and put them into a separate function.
Adjust all the callers to call both functions.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
These hardcoded defaults do not need to be read from
the file. Move them out of libxlDriverConfigLoadFile.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
libxlDriverConfigNew can possibly fail on wrong
firmware values (unlikely) or on failure to create
the log directory (possible if you're debugging
tests with VIR_FILE_ACCESS)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 4a4132b462
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
The way that our file locking works is that we open() the file we
want to lock and then use fcntl(fd, F_SETLKW, ...) to lock it.
The problem is, we are doing all of these as root which doesn't
work if the file lives on root squashed NFS, because if it does
then the open() fails. The way to resolve this is to make this a
non fatal error and leave callers deal with this (i.e. disable
remembering) - implemented in the previous commit.
https://bugzilla.redhat.com/show_bug.cgi?id=1804672
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some cases where we want to remember the original owner
of a file but we fail to lock it for XATTR change (e.g. root
squashed NFS). If that is the case we error out and refuse to
start a domain. Well, we can do better if we disable remembering
for paths we haven't locked successfully.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
So far, in the lock state we are storing only the file
descriptors of the files we've locked. Therefore, when unlocking
them and something does wrong the only thing we can report is FD
number, which is not user friendly at all. But if we store paths
among with FDs we can do better error reporting.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The virutil.h header defines a geteuid() macro for Windows platforms.
This fixes a few missed cases from:
commit b11e8cccdd
Author: Ján Tomko <jtomko@redhat.com>
Date: Sun Feb 16 23:09:15 2020 +0100
Remove virutil.h from all header files
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The autoreconf script will already run aclocal for us,
so there's no need to do that ahead of time.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit fb01e1a44d missed including virutil.h, causing the following
compilation error
../../src/security/virt-aa-helper.c:1055:43: error: implicit declaration of
function 'virHostGetDRMRenderNode' [-Werror=implicit-function-declaration]
1055 | char *defaultRenderNode = virHostGetDRMRenderNode();
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
After the split of enum functions into virenum.h,
this function does not contain anything worth including
in another header file.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Include virutil.h in all files that use it,
instead of relying on it being pulled in somehow.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Include unistd.h in all files that use it, instead
of relying on it being pulled in via virutil.h
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
After the introduction of virenum.h in commit 285c5f28c4,
it is only needed in the C file.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is nothing in the vircgroup.h header file
requiring virutil.h.
Remove it and include unistd.h in the C files.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These tests do not use anything from virutil.h
apart from the transitive include.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Historically, this file was a dump for most of our helper
functions and needed almost everywhere.
With the introduction of virfile.h and virstring.h,
and more importantly, virenum.h and the introduction
of GLib, that is no longer true.
Remove its include from C files that don't even use it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Prefer g_ascii_xdigit_value to virHexToBin.
Check the return value of the function and
remove the g_ascii_isxdigit calls, since
they're done anyway internally.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
When moving virclosecallbacks to src/hypervisor, I did not
adjust all the possible includes in Makefiles.
Use a path relative to src to fix the build.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 25c29ac2f5
This *is* a no-op, but there was a period of sickening dread while
auditing to be sure that no actual confusion between bus and slot had
occurred. I hope to avoid that by following the conventional order.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Reduce the complexity by isolating loop bodies in separate functions.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Pull the code for registering and unregistering a bhyve monitor object
into separate functions to improve code clarity.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
This makes lifecycle management a bit easier thanks to ref counting, and
it is closer to what the qemu driver does.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Just like virhostdev, this depends on domain_conf and
it's shared by multiple hypervisor drivers.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This module depends on domain_conf and is used directly by various
hypervisor drivers.
Move it to src/hypervisor.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently they live in util/virhostdev.
However the virhostdev module is wrongly placed
in util, which is below conf/ in our hierarchy.
Move the functions that are actually used in conf/
to conf/ and remove the include of virhostdev.h
from domain_conf.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are two environment variables that are baked into our
cross-compilation container images at build time, $CONFIGURE_OPTS
and $PKG_CONFIG_LIBDIR: the former contain the options necessary
to convince configure to perform a cross build rather than a
native one, and the latter is necessary so that pkg-config will
locate the .pc files for MinGW libraries. Container images that
are not intended for cross-compilation will not have either one
defined.
The problem is that, while an empty $CONFIGURE_OPTS is completely
harmless, setting $PKG_CONFIG_LIBDIR to an emtpy value will
result in pkg-config not looking in its default search path, thus
not finding any library, and subsequently breaking native builds.
To work around this issue, only pass $PKG_CONFIG_LIBDIR to sudo
when the value is set in the calling environment.
Fixes: 71517ae4db
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Take the format of the backing store from the 'meta' object directly and
use g_steal_pointer to steal the path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When we create the new virStorageSource from the definitions stored in
the parent we should also use the 'backingStoreRawFormat' field to
populate the format.
Callers which use virStorageSourceNewFromBacking are also fixed to stop
setting the format manually.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We store the backing file string in the structure so we should also
store the format so that callers can be simplified.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both callers pass false. Since we frown upon format probing, remove the
unused possibility to do the probing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We create some images for testing our code. We've recorded wrong format
of the backing file for one of the images though.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Configuring vhost-user-gpu like:
<video>
<driver name='vhostuser'/>
<model type='virtio' heads='1'/>
</video>
Triggers an apparmor denial like:
apparmor="DENIED" operation="exec" profile="libvirtd"
name="/usr/lib/qemu/vhost-user-gpu" pid=888257 comm="libvirtd"
requested_mask="x" denied_mask="x" fsuid=0 ouid=0
This helper is provided by qemu for vhost-user-gpu and thereby being
in the same path as qemu_bridge_helper. Due to that adding a rule allowing
to call uses the same path list.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
When using command line passthrough users will often trip up over the
security protections like SELinux, DAC, namespaces, etc which will
deny access to files they are passing. This document explains the
various protections and how to deal with their policy, and/or how
to disable them.
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The backend name is memory-backend-memfd but we've been checking
for memory-backend-memory.
Reported by GCC on rawhide:
../../../src/internal.h:75:22: error: 'strcmp' of a string of length 21 and
an array of size 21 evaluates to nonzero [-Werror=string-compare]
../../../src/qemu/qemu_command.c:3525:20: note: in expansion of macro 'STREQ'
3525 | } else if (STREQ(backendType, "memory-backend-memory") &&
| ^~~~~
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 24b74d187c
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we treat MinGW like any other cross-build target, we
should update our Travis CI configuration.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
For container images targeted at cross-building, we bake a small
amount of architecture-specific information in the environment so
that builds can work as expected without requiring additional work
from the user; unfortunately this information got lost as soon as
we called sudo. Explicitly allow it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
While we have CI testing coverage for many platforms, we don't test any
non-glibc based Linux and there are other non-Linux platforms we don't
officially target, both of which might hit regressions.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The table of contents in the RST based files uses <p> tags inside the
<li>, which results in 1em's worth of spacing above & below each
entry. This results in way too much whitespace in the ToC.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If PrlVmDev_GetType(), PrlVmDev_GetIndex() or PrlVmCfg_GetBootDevCount()
fails, return false to indicate error. Returning -1 would be interpreted
as true when used in an if-statement.
Fixes: 8c9252aa6d
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The order of arguments were not the same in the definition and
declaration. All callers use the same order as the definition, so there
is no bug, but change the function declaration to match the
implementation to avoid confusion.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To more closely match the previous usage in virEventPollDispatchHandles,
where called the handle callback for any revents returned by poll.
This should fix the virtlogd error on subsequent domain startup:
error: can't connect to virtlogd: Cannot open log file:
'/var/log/libvirt/qemu/f28live.log': Device or resource busy
as well as virtlogd spinning caused by virLogHandlerDomainLogFileEvent
never being called on hangup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: f8ab47cb44
Fixes: 946a25274c
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These were needed for virBhyveTapGetRealDeviceName
but were not deleted after the function was moved
to src/util.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: a1bd8d2546
Another vircgroup helper to avoid code repetition between
the LXC and QEMU driver.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
lxcDomainSetMemoryParameters() and qemuDomainSetMemoryParameters()
has duplicated chunks of code that can be put in a new
helper.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new helper avoids more code repetition inside
lxcDomainSetBlkioParameters() and qemuDomainSetBlkioParameters().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the introduction of virDomainDriverMergeBlkioDevice() in a
previous patch, it is now clear that lxcDomainSetBlkioParameters() and
qemuDomainSetBlkioParameters() uses the same loop to set cgroup
blkio parameter of a domain.
Avoid the repetition by adding a new helper called
virDomainCgroupSetupDomainBlkioParameters().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
lxcDomainParseBlkioDeviceStr() and qemuDomainParseBlkioDeviceStr()
are the same function. Avoid code repetition by putting the code
in a new helper.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
lxcDomainMergeBlkioDevice() and qemuDomainMergeBlkioDevice()
are the same functions. This duplicated code can't be put in
the existing domain_cgroup.c since it's not cgroup related.
This patch introduces a new src/hypervisor/domain_driver.c to
host this more generic code that can be shared between virt
drivers. This new file is then used to create a new helper
called virDomainDeivceMergeBlkioDevice() to eliminate the code
repetition mentioned above. Callers in LXC and QEMU files
were updated.
This change is a preliminary step for more code reduction of
cgroup related code inside lxcDomainSetBlkioParameters() and
qemuDomainSetBlkioParameters().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuSetupCgroupVcpuBW() and lxcSetVcpuBWLive() shares the
same code to set CPU CFS period and quota. This code can be
moved to a new virCgroupSetupCpuPeriodQuota() helper to
avoid code repetition.
A similar code is also executed in virLXCCgroupSetupCpuTune(),
but without the rollback on error. Use the new helper in this
function as well since the 'period' rollback, if not a
straight improvement for virLXCCgroupSetupCpuTune(), is
benign. And we end up cutting more code repetition.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code that calls virCgroupSetCpuShares() and virCgroupGetCpuShares()
is repeated in 4 different places. Let's put it in a new
virCgroupSetupCpuShares() to avoid code repetition.
There's a reason of why we execute a Get in the same value we
just executed Set, explained in detail by commit 97814d8ab3.
Let's add a gist of the reasoning behind it as a comment in
this new function as well.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code from qemuSetupCgroupCpusetCpus() and virLXCCgroupSetupCpusetTune()
can be centralized in a new helper called virCgroupSetupCpusetCpus().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virLXCCgroupSetupMemTune() and qemuSetupMemoryCgroup() shares
duplicated code that can be put in a new helper to avoid
code repetition.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is duplicated code between virt drivers that needs to
be moved to avoid code repetition. In the case of duplicated
code between lxc_cgroup.c and qemu_cgroup.c a common place
would be utils/vircgroup.c. The problem is that this would
introduce /conf related definitions that shouldn't be imported
to vircgroup.c, which is supposed to be a place for utilitary
cgroups functions only. And syntax-check would forbid it anyway
due to cross-directory includes being used.
An alternative would be to overload domain_conf.c, which already
contains all the definitions required. But that file is already
crowded with XML handling code and we wouldn't do any favors to
it by putting more utilitary, non-XML parsing/formatting code
there.
In [1], Cole suggested a 'domain_cgroup' file to host common code
between lxc_cgroup and qemu_cgroup, and Daniel suggested a
'src/hypervisor' dir to host these type of files. This patch
introduces src/hypervisor/domain_cgroup.c and, to get started,
introduces a new virDomainCgroupSetupBlkio() function to host shared
code between virLXCCgroupSetupBlkioTune() and qemuSetupBlkioCgroup().
[1] https://www.redhat.com/archives/libvir-list/2019-December/msg00817.html
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previous patch moved all duplicated code that were setting
and getting BlkioDevice parameters to vircgroup.c. We can
turn them into static and spare a few symbols in
libvirt_private.syms.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are code repetition of set() and get() blkio device
parameters across lxc and qemu files. Use the new vircgroup
helpers to trim the repetition a bit.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current use of the functions that set and get
BlkioDevice attributes is doing a set(), followed by
a get() of the same parameter right after. This is done
because there is no guarantee that the kernel will accept
the desired value given by the set() call, thus we need to
execute a get() right after to get the actual value.
This patch adds helpers inside vircgroup.c to execute these
operations. Next patch will use these helpers to reduce
code repetition in LXC and QEMU files.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The inc.am Makfiles are included by src/Makefile.am.
Adjust the paths added to OPENRC_INIT_FILES_IN
accordingly.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: f4b1c020a2
The current documentation is fairly terse and not easy to decode
for someone who's not intimately familiar with the inner workings
of timer devices. Expand on it by providing a somewhat verbose
description of what behavior each policy will result in, as seen
from both the guest OS and host point of view.
This is lifted directly from QEMU commit
commit 2a7d957596786404c4ed16b089273de95a9580ad
Author: Andrea Bolognani <abologna@redhat.com>
Date: Tue Feb 11 19:37:44 2020 +0100
qapi: Expand documentation for LostTickPolicy
v4.2.0-1442-g2a7d957596
The original text also matched word for word the documentation
found in QEMU.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The variable is allocated, but never freed.
==119642== 29 bytes in 1 blocks are definitely lost in loss record 409 of 671
==119642== at 0x483579F: malloc (vg_replace_malloc.c:309)
==119642== by 0x5AB075F: __vasprintf_internal (in /lib64/libc-2.29.so)
==119642== by 0x57C1A28: g_vasprintf (in /usr/lib64/libglib-2.0.so.0.6000.7)
==119642== by 0x579A0CC: g_strdup_vprintf (in /usr/lib64/libglib-2.0.so.0.6000.7)
==119642== by 0x4AE6D58: vir_g_strdup_printf (glibcompat.c:197)
==119642== by 0x136EEE: qemuTestParseCapabilitiesArch (testutilsqemu.c:291)
==119642== by 0x138506: testQemuInfoSetArgs (testutilsqemu.c:763)
==119642== by 0x135FFF: mymain (qemuxml2argvtest.c:3093)
==119642== by 0x13A60E: virTestMain (testutils.c:839)
==119642== by 0x1368C2: main (qemuxml2argvtest.c:3121)
Fixes: 42b3e5b9e4
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The persistent alias name @persistent is allocated in
virDomainNetDefParseXML() but never freed.
==119642== 22 bytes in 2 blocks are definitely lost in loss record 178 of 671
==119642== at 0x483579F: malloc (vg_replace_malloc.c:309)
==119642== by 0x58F89F1: xmlStrndup (in /usr/lib64/libxml2.so.2.9.9)
==119642== by 0x4BA3B74: virXMLPropString (virxml.c:520)
==119642== by 0x4BDB0C5: virDomainNetDefParseXML (domain_conf.c:11876)
==119642== by 0x4BF9EF4: virDomainDefParseXML (domain_conf.c:21196)
==119642== by 0x4BFCD5B: virDomainDefParseNode (domain_conf.c:21943)
==119642== by 0x4BFCC36: virDomainDefParse (domain_conf.c:21901)
==119642== by 0x4BFCCCB: virDomainDefParseFile (domain_conf.c:21924)
==119642== by 0x114A9D: testCompareXMLToArgv (qemuxml2argvtest.c:452)
==119642== by 0x13894F: virTestRun (testutils.c:143)
==119642== by 0x11F46E: mymain (qemuxml2argvtest.c:1316)
==119642== by 0x13A60E: virTestMain (testutils.c:839
Fixes: fb0509d06a
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The privateData object is allocated in virDomainFSDefNew() but
never unref'd.
==119642== 480 bytes in 20 blocks are definitely lost in loss record 656 of 671
==119642== at 0x4837B86: calloc (vg_replace_malloc.c:762)
==119642== by 0x57806A0: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6000.7)
==119642== by 0x4AE7392: virAllocVar (viralloc.c:331)
==119642== by 0x4B64395: virObjectNew (virobject.c:241)
==119642== by 0x48F1464: qemuDomainFSPrivateNew (qemu_domain.c:1427)
==119642== by 0x4BBF004: virDomainFSDefNew (domain_conf.c:2307)
==119642== by 0x4BD859A: virDomainFSDefParseXML (domain_conf.c:11217)
==119642== by 0x4BF9DD1: virDomainDefParseXML (domain_conf.c:21179)
==119642== by 0x4BFCD5B: virDomainDefParseNode (domain_conf.c:21943)
==119642== by 0x4BFCC36: virDomainDefParse (domain_conf.c:21901)
==119642== by 0x4BFCCCB: virDomainDefParseFile (domain_conf.c:21924)
==119642== by 0x114A9D: testCompareXMLToArgv (qemuxml2argvtest.c:452)
Fixes: 5120577ed7
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are some architectures that support capabilities that others
do not (e.g. s390x supports cpu comparison and baseline via QEMU).
Let's make testQEMUSchemaLoad accept a string to specify the schema
to load based on the specified arch.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
During the hypervisor-agnostic validation of network devices, verify
that the interface type is either "network" or "bridge", and that if
there is any <virtualport>, that it doesn't have any type associated
with it.
This needs to be done both for the parse-time validation and for
runtime validation (after a port has been acquired from any associated
network), because an interface with type='network' could have an
actual type at runtime of "hostdev" or "direct", neither of which
support isolated='true' (yet). Likewise, if an interface is
type='network', then at runtime a <virtualport> with a type that
doesn't support isolated='yes' (e.g. "openvswitch", "802.1Qbh" -
currently *none* of the available virtualport types support it)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This setting can be updating very easily on an already active
interface by just changing it in sysfs. If the bridge used for
connection is also changed, there is no need to separately update it,
because the new setting isf done as a part of connecting to the bridge
anyway.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch pushes the isolatedPort setting from the <interface> down
all the way to the callers of virNetDevBridgeAddPort(), and sets
BR_ISOLATED on the port (using virNetDevBridgePortSetIsolated()) after
the port has been successfully added to the bridge.
Signed-off-by: Laine Stump <laine@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similar to the way that the <vlan>, <bandwidth>, and <virtualport>
elements and the trustGuestRxFilters attribute in a <network> (or in
the appropriate <portgroup> element of a <network> can be applied to a
port when it is allocated for a domain's network interface, this patch
checks for a configured value of <port isolated="yes|no"/> in
either the domain <interface> or in the network, setting isolatedPort
in the <networkport> to the first one it finds (the setting from the
domain's <interface> is preferred). This, in turn, is passed back to
the domain when a port is allocated, so that the domain will use that
setting.
(One difference from <vlan>, <bandwidth>, <virtualport>, and
trustGuestRxFilters, is that all of those can be set in a <portgroup>
so that they can be applied only to a subset of interfaces connected
to the network. This didn't really make sense for the isolated setting
due to the way that it's implemented in Linux - the BR_ISOLATED flag
will prevent traffic from passing between two ports that both have
BR_ISOLATED set, but traffic can still go between those ports and
other ports that *don't* have BR_ISOLATED. (It would be nice if all
traffic from a BR_ISOLATED port could be blocked except traffic going
to/from a designated egress port or ports, but instead the entire
feature is implemented as a single flag. Because of this, it's really
only useful if all the ports on a network are isolated, so setting it
for a subset has no practical utility.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a very simple thing to parse and format, but needs to be done
in 4 places, so two trivial utility functions have been made that can
be called from all the higher level parser/formatters:
<domain><interface>
<domain><interface><actual> (only in domain status)
<network>
<networkport>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When this flag is set for an interface attached to a bridge, traffic
to/from the specified interface can only enter/exit the bridge via
another attached interface that *doesn't* have the BR_ISOLATED flag
set. This can be used to permit guests to communicate with the rest of
the network, but not with each other.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Not only was the original error code destroyed in the case of
encountering an error during recovery from a failed attach to the
bridge (and then *that* error was destroyed by logging a *second*
error about the failure to recover - virNetDevBridgeAddPort() already
logs an error, so the one about failing to recover was redundant), but
if the recovery was successful, the function would then return success
to the caller even though it had failed.
Fixes: 2711ac8716
(overwritten errors were introduced along with this functionality)
Fixes: 6bde0a1a37
(the wrong return value was introduced by a refactor)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is in the data structure and the parse/format functions, and is
getting passed all around correctly, it just was omitted from the RNG,
which hasn't been noticed because no human is creating <networkport>
XML, and so it's never getting validated against the schema.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We specify "true" as the fail-action for LIBVIRT_CHECK_PKG.
This was used when we had a fallback to non-pkg-config detection,
then removed in commit 5bdcef13d1
later re-introduced in commit dc3d2c9f8c
and then left in when removing the old detection again in
commit 18981877d2
Remove it to properly error out when libxl was requested but not
detected.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 18981877d2
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Firstly, the check for disk I/O error can be moved into 'if
(!offline)' section a few lines below.
Secondly, checks for vmstate and slirp should be moved under the
same section because they reflect live state of a domain. For
offline migration no QEMU is involved and thus these restrictions
are not valid.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In two places where virPidFileForceCleanupPath() is called, we
try to unlink() the pidfile again. This is needless because
virPidFileForceCleanupPath() has done just that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virPidFileReadPath() function is supposed to return 0 on
success or a negative value on failure. But the negative value
has a special meaning - it's negated errno. Therefore, when
converting string to int we shouldn't return -1 which translates
to EPERM. Returning EINVAL looks closer to the truth.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's nothing to clean up. Make it obvious what is returned.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Extract the code that directly deals with storage. This allows further
simplification and clarification of virStorageFileGetMetadataRecurse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Replacing virHashLookup by virHashHasEntry allows us to use NULL as the
payload of the hash table rather than putting a fake '1' pointer into
the table.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The path can be NULL e.g. for NBD disks. Use NULLSTR to prevent use of
NULL in %s.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Move the assignment to a place where we know that the backing store is
present rather than having to check in the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We call virStorageFileSupportsBackingChainTraversal which already checks
that the 'storageFileRead' callback is non-NULL, which in turn means
that virStorageFileRead will not return -2.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Probing by file suffix was meant to be a last resort if probing by
contents fails or is not supported. For most formats we never specified
any suffix. There's a few formats implementing both magic bytes and
suffix and finally DMG which had only suffix probing. Since suffix
probing is nowhere reliable and only one format depends on in which has a
comment that qemu doesn't do the probing either drop the whole
infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In commit v5.9.0-400-gaf8e39921a I removed printing model's fallback and
vendor_id attributes when no model is specified. However, vendor_id
makes sense even without a specific CPU model (for host-model CPUs).
https://bugzilla.redhat.com/show_bug.cgi?id=1804549
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Relevant code seems to treat forward modes 'route', 'nat', 'open' and 'none'
the same but documentation hasn't reflected that so far.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To fix the actual bug, it was necessary to make networkPlugBandwidth() be
called also for 'bridge'-type networks implemented using macvtap's 'bridge'
mode (previously it was only called for those implemented on top of an
existing bridge).
However, it seems beneficial to call it for other network types as well, at
least because it removes an inconsistency in types of bandwidth configuration
changes permissible in inactive and active domain configs. It should also be
safe as the function pretty much amounts to NOP if no QoS is requested and the
new behaviour should not be any worse than before if it is.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Even if an interface of type 'network', setting 'floor' is only supported
if the network's forward type is nat, route, open or none.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
QoS 'floor' setting is documented to be only supported for interfaces of
type 'network'. Fail with an error message on attempt to set 'floor' on
an interface of any other type.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This compound condition will be useful in several places so it
makes sense to give it a name for better readability.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Implement support for the slice of type 'storage' which allows to set
the offset and size which modifies where qemu should look for the start
of the format container inside the image.
Since slicing is done using the 'raw' driver we need to add another
layer into the blockdev tree if there's any non-raw image format driver
used to access the data.
This patch adds the blockdev integration and setup of the image data so
that we can use the slices for any backing image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a set of test data to see whether the backing store strings are
formatted reasonably. Note that we don't support direct creation of such
images so those tests are not enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When creating overlay images e.g. for snapshots or when merging
snapshots we often specify the backing store string to use. Make the
formatter aware of backing chain entries which have a <slice>
configured so that we record it properly. Otherwise such images
would not work without the XML (when detecting the backing chain).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The storage slice will require a specific node name in cases when the
image format is not raw. Store and format them in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are going to add support for specifying offset and size attributes
which will allow controling where the image and where the guest data
itself starts in the source of the disk. This will be represented by
a <slices> element filled with either a <slice type='storage'> for the
offset of the image format data.
Add the XML documentation and RNG schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Specifically creating such images via libvirt during blockjobs would
be much more hassle than it's worth. Just forbid them for now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We support explicit storage slices only when using blockdev. Storage
slices expressed via the backing store string are left to qemu to
open correctly.
Reject storage slices configured via the XML for non-blockdev usage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we have a 'format' type slice for a raw driver we can directly format
the values.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce virStorageSourceSlice which will store the 'offset' and 'size'
of a virStorageSource and declare it as 'sliceStorage' and 'sliceFormat'
attributes of a virStorageSource.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU allows specifying the offset and size into a raw file to expose a
sub-slice of the image to the guest with the raw driver. Libvirt
currently doesn't support it but we can add test case for future
reference.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a domain has a NVMe disk it already has the access configured.
Trying to configure it again on a commit or some other operation
is wrong and condemned to failure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Its use is limited to certain guest types, and it only supports
a subset of all possible tick policies.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new timer model will be used to control the behavior of the
virtual timer for KVM ARM/virt guests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will use this capability to detect whether the QEMU binary
supports the kvm-no-adjvtime CPU feature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make sure we are taking all possible virDomainTimerNameType values
into account. This will make upcoming changes easier.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirt switched to using a UNIX socket for monitors in
2009 for version 0.7.0. It seems unlikely that there is
a running QEMU process that hasn't been restarted for
11 years while also taking a libvirt upgrade. Therefore
we can drop support for opening a PTY for the QEMU
monitor.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
On FreeBSD 12 the default ulimit settings allow for 100,000
open file descriptors. As a result spawning processes in
libvirt is abominably slow. Fortunately FreeBSD has long
since provided a good solution in the form of closefrom(),
which closes all FDs equal to or larger than the specified
parameter.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When emulating smartcard with host certificates, qemu needs to
be able to read the certificates files. Add necessary code to
add the smartcard certificates file path to the apparmor profile.
Passthrough support has been tested with spicevmc and remote-viewer.
v2:
- Fix CodingStyle
- Add support for 'host' case.
- Add a comment to mention that the passthrough case doesn't need
some configuration
- Use one rule with '{,*}' instead of two rules.
Signed-off-by: Arnaud Patard <apatard@hupstream.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Users expect to be able to configure the <console> element and see
that configuration reflected into the <serial> element or at least
sticking, however due to our crazy back-compat code that doesn't
always happen.
There's really not much we can do to make this kind of corner cases
work as the user would expect, especially not without introducing
additional complexity in a part of libvirt that already has more
than a fair share of it; we can, however, improve the documentation
so that it will nudge said users in the right direction.
https://bugzilla.redhat.com/show_bug.cgi?id=1770725
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our virCommand helper API already has the ability to capture
program output, there's no need to open-code it.
Apart from simplifying the code, the test is marginally faster
due to recent improvements in virCommandMassClose.
Until now, both stderr and stdout were stored in the same buffer.
This change stores stderr separately and expects it to be empty
for all the tests we currently run.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use g_autoptr where possible.
virTestCapsBuildNUMATopology is not converted completely,
because while the VIR_FREE call on cell_cpus is technically
wrong, neither VIR_ALLOC_N nor virBitmapNew can return
an allocation error now so it is effectively dead code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The function returns gboolean.
Compare against the FALSE value from GLib.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 2c33532423
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Do not look for exception patterns in ${srcdir}./x-$@
nor the VC_LIST_EXCEPT_DEFAULT variable.
This also removes the default exception for ChangeLog.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This exception is no longer useful since README is just a symlink
to README.md, which is a subject to this check already.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We no longer implement a wrapper over strdup - g_strdup
is preferred.
The use of strncpy was removed in:
commit 7d70a63b94
util: Improve virStrncpy() implementation
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Both xen/xend_internal and bootstrap.conf have been deleted from git.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
NEWS was replaced by docs/news.html, so the pre-requisite for this
rule is not fulfilled.
Also, PREV_VERSION_REGEXP does not seem to be defined anywhere.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As foretold, fixed automake is so common nowadays even Ubuntu 16.04
and Debian 9 have 1.11.6 as the oldest available version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Using '^' in in_vc_files assumes the build is happening
in srcdir, which is no longer possible as of:
commit f96395e78e
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our last conforming ChangeLog was removed from git in 2009 by:
commit 27b175b9a2
generate ChangeLog from git logs into distribution tarball
Ten years later, it reappeared in:
commit ce97c33a79
maint: Stop generating ChangeLog from git
which does not have a single line complying to this syntax
check rule.
At some point between the two commits VC_LIST_EXCEPT gained
a default exception for ChangeLog and it did not seem to be
overriden anywhere.
Just remove the rule.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add few cases that prove the second format of "json:" pseudo-URIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we parse attributes for 'raw' which is a format driver and thus
has nested 'file' structure we must prevent that this isn't nested
arbitrarily.
Add a flag for the function which allows parsing of 'format' type
drivers only on the first pass.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two possibilities:
1) json:{"file":{"driver":...}}
2) json:{"driver":...}
Our code didn't work properly with the second one as it was expecting
the 'file' wrapper. Conditionalize the removal to only the situation
when the top level doesn't have "driver".
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The parser was originally designed only for protocol parsers. Since
we already have 'raw' format driver in the list we'll need to be able
to parse it too. In later patches this will be used to prevent parsing
nested format drivers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally virStorageSourceParseBackingJSON didn't recurse, but when
the 'raw' driver support was added we need to parse it's information
which contains nested 'file' object.
Since the deflattening helper recurses already there's no need to call
it again. Move it one level up to the entry point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are a few error messages which might want to report the original
backing store string. Pass it around rather than trying to re-generate
it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify qemuMonitorBlockdevAdd so that it takes a double pointer for the
@props argument so that it's cleared inside the call. This allows
writing cleaner callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that we accept full backing chains on input nothing should prevent
users from also using disk type 'VOLUME' for specifying the backing
images.
Do the translation for the whole backing chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract all the code setting up one storage source from the rest which
sets up the whole disk. This will allow us to prepare the whole backing
chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Only 'def->src' was ever used in this function. Use the source directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Only 'def->src' was ever used in this function. Use the source directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Only 'def->src' was ever used in this function. Use the source directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virStringSplitCount instead of virStringSplit so that we can drop
the call to virStringListLength and use VIR_AUTOSTRINGLIST to declare
it and allow removal of the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Few switch cases returned failure but didn't report an error. For a
situation when the backingStore type='volume' was not translated the
following error would occur:
$ virsh start VM
error: Failed to start domain VM
error: An error occurred, but the cause is unknown
After this patch:
$ virsh start VM
error: Failed to start domain VM
error: internal error: storage source pool 'tmp' volume 'pull3.qcow2' is not translated
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simplify gathering the actual return value from a passed-through QMP
command when using 'qemu-monitor-command' by adding '--return-value'
switch which just extracts the 'return' section and alternatively
reports an error if the section is not present.
This simplifies gathering of some test data where the full reply would
need to be trimmed just for the actual return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Mention that we actually by default use QMP and clarify the rest
of the documentation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We call APIs that reset the error in the rollback code.
Preserve the error from the original call that failed.
This turns the boringly cryptic:
error: Unable to set interface parameters
error: An error occurred, but the cause is unknown
to the unexpectedly anarchist:
error: internal error: Child process (/usr/sbin/tc filter add
dev vnet1 parent ffff: protocol all u32 match u32 0 0 police
rate 4294968kbps burst 4294968kb mtu 64kb drop flowid :1)
unexpected exit status 1: Illegal "rate"
Illegal "police"
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: f02e21cb33https://bugzilla.redhat.com/show_bug.cgi?id=1800505
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When debugging test failures in seven independent test
cases, it might be helpful to only gather the debug output
of the failing cases.
Record the indexes of the tests that fail and print them
in the VIR_TEST_RANGE of the command line that will result
in only those tests being run.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This deletes all trace of gnulib from libvirt. We still
have the keycodemapdb submodule to deal with. The simple
solution taken was to update it when running autogen.sh.
Previously gnulib could auto-trigger refresh when running
'make' too. We could figure out a solution for this, but
with the pending meson rewrite it isn't worth worrying
about, given how infrequently keycodemapdb changes.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is no longer require since switching to the GLib based
event loop impl.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This sets the GLib event loop as the impl when calling
virEventRegisterDefaultImpl(). This remains a private
impl detail of libvirt, so applications must *NOT*
assume that a call to virEventRegisterDefaultImpl()
results in a GLib based event loop.
They should continue to use the libvirt-glib API
gvir_event_register() if they explicitly want to guarantee
a GLib event loop.
This follows the general principal that the libvirt public
API should not expose the fact that GLib is being used
internally.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The libvirt-glib project has provided a GMainContext based
event loop impl for applications. This imports it and sets
it up for use by libvirt as the primary event loop. This
remains a private impl detail of libvirt.
IOW, applications must *NOT* assume that a call to
"virEventRegisterDefaultImpl" results in a GLib based
event loop. They should continue to use the libvirt-glib
API gvir_event_register() if they explicitly want to
guarantee a GLib event loop.
This follows the general principle that the libvirt public
API should not expose the fact that GLib is being used
internally.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To eliminate the dependancy on GNULIB's poll impl, we need
to change the RPC client code to use GMainLoop. We don't
really want to use GIOChannel, but it provides the most
convenient way to do socket event watches with Windows
portability. The other alternative would be to use GSocket
but that is a much more complex change affecting libvirt
more broadly.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We need to be able to create event loop watches using the
GSource API for sockets. GIOChannel is able todo this, but
we don't want to use the GIOChannel APIs for reading/writing,
and testing shows just using its GSource APIs is unreliable
on Windows.
This patch thus creates a standalone helper API for creating
a GSource for a socket file descriptor. This impl is derived
from code in QEMU's io/channel-watch.c file that was written
by myself & Paolo Bonzini & thus under Red Hat copyright.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For long running jobs (save, managed save, dump & live migrate)
virsh runs a background thread for executing the job and then
has the main thread catch Ctrl-C for graceful shutdown, as well
as displaying progress info.
The monitoring code is written using poll, with a pipe used
to get the completion status from the thread. Using a pipe
and poll is problematic for Windows portability. This rewrites
the code to use a GMainLoop instance for monitoring stdin and
doing progress updates. The use of a pipe is entirely eliminated,
instead there is just a shared variable between both threads
containing the job completion status.
No mutex locking is used because the background thread writes
to the variable only when the main loop is still running,
while the foreground thread only reads it after the main loop
has exited.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The contents of 'struct dirent' are only valid until the next call to
readdir() or closedir(). It is thus invalid to save a pointer to the
'd_name' field. Somehow this hasn't affected the test suite until
recently when FreeBSD 12 started showing use of uninitialized memory
resulting in test failures.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Pvpanic device supports bit 1 as crashloaded event, it means that
guest actually panicked and run kexec to handle error by guest side.
Handle crashloaded as a lifecyle event in libvirt.
Test case:
Guest side:
before testing, we need make sure kdump is enabled,
1, build new pvpanic driver (with commit from upstream
e0b9a42735f2672ca2764cfbea6e55a81098d5ba
191941692a3d1b6a9614502b279be062926b70f5)
2, insmod new kmod
3, enable crash_kexec_post_notifiers,
# echo 1 > /sys/module/kernel/parameters/crash_kexec_post_notifiers
4, trigger kernel panic
# echo 1 > /proc/sys/kernel/sysrq
# echo c > /proc/sysrq-trigger
Host side:
1, build new qemu with pvpanic patches (with commit from upstream
600d7b47e8f5085919fd1d1157f25950ea8dbc11
7dc58deea79a343ac3adc5cadb97215086054c86)
2, build libvirt with this patch
3, handle lifecycle event and trigger guest side panic
# virsh event stretch --event lifecycle
event 'lifecycle' for domain stretch: Crashed Crashloaded
events received: 1
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
When using ``....`` in RST, this results in <span class="literal">...</span>
instead of <code>...</code>. We thus need an extra rule to render it
with a monospace font. Colouring a light gray also helps the text
stand out a little more and matches background of <pre> blocks.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Starting a KVM domain on s390 with old machine type (such as
s390-ccw-virtio-2.5) and without any guest CPU model configured fails
with
CPU models are not available: KVM doesn't support CPU models
QEMU error. This is cause by libvirt using host-model CPU as the default
CPU based on QEMU reporting "host" CPU model as being the default one
(see commit v5.9.0-402-g24d8202294: qemu: Use host-model CPU on s390 by
default). However, even though both QEMU and KVM support CPU models on
s390 and QEMU can give us the host-model CPU, we can't use it with old
machine types which only support -cpu host.
https://bugzilla.redhat.com/show_bug.cgi?id=1795651
Reported-by: Christian Ehrhardt <paelzer@gmail.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The usability of a specific CPU mode may depend on machine type, let's
prepare for this by passing it to virQEMUCapsIsCPUModeSupported.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After LXC version 3, some settings were changed to new names. Same as
network. LXC introduced network indexes and changed IPv{4,6} addresses
fields. Before, users should only pass `lxc.network.ipv4` to define an
IPv4 address. Now, on version 3, users need to pass
`lxc.net.X.ipv4.address` to specify the same thing. Same for IPv6.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To configure network settings using config file, legacy LXC settings
require starting them with 'lxc.network.type' entry. If someone
accidentally starts with 'lxc.network.name', libvirt will crash with
segfault. This patch checks if this case is happening.
Sample invalid settings:
lxc.network.link = eth0
lxc.network.type = phys
lxc.network.name = eth1
lxc.network.ipv4 = 192.168.122.2/24
lxc.network.ipv4.gateway = 192.168.122.1
Now, libvirt only see error without segmentation fault.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There is a race deadlock in eventtest after the recent rewrite to drop
GNULIB from libvirt code base.
The issue happens when the callbacks testPipeReader() or testTimer()
are called before waitEvents() starts waiting on `eventThreadCond`.
It will never happen because the callbacks are already done and there
is nothing that will signal the condition again.
Reported-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This patch extends the ppc64 capabilities data with TPM related XML
and responses. The replies and xml files are copies of the 4.2.0 version
of these files with TPM related data added.
We also need to copy qemu_4.2.0.ppc64.xml to qemu_5.0.0.ppc64.xml.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch adds support for the tpm-spapr device model for ppc64. The XML for
this type of TPM looks as follows:
<tpm model='tpm-spapr'>
<backend type='emulator'/>
</tpm>
Extend the documentation.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Introduce VIR_DOMAIN_TPM_MODEL_DEFAULT as a default model which we use
in case the user does not provide a model in the device XML. It has
the TIS's previous value of '0'. In the post parsing function
we change this default value to 'TIS' to have the same model as before.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This lets it generate the remote dispatch for StorageVolGetInfoFlags.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Technically, there is no memleak here, since the only
allocations are filled by virDomainDeviceInfoParseXML,
which cleans up after itself.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Simple g_autofree is not enough if we put allocated
data into the device structure.
Define the AUTOPTR_CLEANUP function and use it here.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Xu Yandong <xuyandong2@huawei.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The virFilePrintf function was a wrapper for fprintf() to provide
Windows portability, since gnulib's fprintf() replacement was
license restricted. This is no longer needed now we have the
g_fprintf function available.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The printf/fprintf function impls provided on Windows do
not follow the normal syntax for format specifiers as
the UNIX hosts. Currently we use GNULIB to provide a
portability fix for this. GLib has also imported the
GNULIB impl for this same reason, and thus we can rely
on the g_printf / g_fprintf functions.
This identified a couple of places not explicitly
linking to glib.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
On macOS some definitions are in xlocale.h, instead of in
locale.h. GNULIB hides this difference by making the latter
include the former.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
MinGW lacks ENOMSG until version 6.0.0 (Fedora 31).
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All our supported Linux distros now have this header.
It has never existed on FreeBSD / macOS / Mingw.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we get rid of GNULIB, we need to check for -lpthread
support.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The O_SYNC flag is not defined on Windows platforms.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This addreses portability to Windows and standardizes
error reporting. This fixes a number of places which
failed to set O_CLOEXEC or failed to report errors.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This hides the differences between Windows and UNIX,
and adds standard error reporting.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The build still succeeds with the workaround removed, so
whatever was causing the problem no longer exists.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Most code now uses the virProcess / virCommand APIs, so
the need for sys/wait.h is quite limited. Removing this
include removes the dependency on GNULIB providing a
dummy sys/wait.h for Windows.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Almost none of the virFDStream code will actually work
on WIN32 builds, nor is it used except for in the
virtualbox driver for screenshots. It is simpler to
wrap it all in a '#ifndef WIN32'.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Remove imports of poll.h which are redundant, and
conditionalize remaining usage that needs to compile
on Windows platforms.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current event loop test suite has two threads running
in lockstep. This was just about viable when we have full
control over the internal details of the event loop impl.
When we're using the GLib event loop though there are
things going on that we don't know about, such as use of
eventfd() file descriptors. This will break the assumptions
in the test suite, causing non-deterministic failures.
This change switches the event loop thread to run fully
asynchronously from the test suite cases. This is slightly
weaker validation, but the only way we can get a reliable
test suite.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This effectively reverts
commit 39c77fe586
Author: Michal Prívozník <mprivozn@redhat.com>
Date: Wed Jan 16 11:58:00 2013 +0100
Introduce event loop to commandtest
because nothing in the current test suite needs this
event loop.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The event test directly calls the internal poll event impl
APIs. It does not rely on any specific details of the poll
impl, so it is better to use the public APIs.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The flag for the virDomainUndefine API is supported even if we report
that <backup supported='no'/>. Mention it in the docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use qemuBlockBitmapsHandleBlockcopy to calculate bitmaps to copy over
for a block-copy job.
We copy them when pivoting to the new image as at that point we are
certain that we don't dirty any bitmap unnecessarily.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use some of the existing bitmap data to add tests for
qemuBlockBitmapsHandleBlockcopy.
As the output depends on the ordering in the hash table we must also
install the "virdeterministichash" mock preload library.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a function calculating which bitmaps to copy to the mirror during
a block-copy operation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a case where a bitmap spanning multiple images is missing one of the
intermediate components.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a validator which checks that a bitmap spanning multiple backing
chain members doesn't look broken. The current rules are that no
intermediate birmaps are missing (unfortunately it's hard to know
whether the topmost or bottommost bitmap is missing) and none of the
components is inconsistent.
We can obviously improve it over time.
The validator is also tested against the existing bitmap data we have
for the backup merging test as well as some of the existing broken
bitmap synthetic test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The flags may control important aspects of the block job which may
influence also the termination of the job. Store the 'flags' for all
the block job types.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a variable which will store the contents of the 'flags' variable as
passed in by the individual block jobs. Since the flags may influence
behaviour of the jobs it's important to preserve them to the
finalization steps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_new0 and skip checking of the return value of keyCopy callback
as both are bound to return a valid pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tweak the return value expectation comment so that it doesn't
necessarily require to allocate memory and refactor the implementations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the glib allocation function that never returns NULL and remove the
now dead-code checks from all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a helper that concatenates the second array into the first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Create a wrapper for qemuBlockGetNamedNodeData named
qemuBlockGetNamedNodeData. The purpose of the wrapper is to integrate
the monitor handling functionality and in the future possible
qemuCaps-based flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow qemu access to modify backing files in case when we want to delete
a checkpoint.
This patch adds tracking of which images need to be relabelled when
calculating the transaction, the code to relabel them and rollback.
To verify that stuff works we also output the list of images to relabel
into the test case output files in qemublocktest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the synthetic test data to verify that the algorithm correctly picks
bitmaps to merge when the bitmap is changed along with the image itself.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add test cases for merging various pairs of bitmaps when snapshots were
created together with checkpoints.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow deleting of checkpoints when snapshots were created along. The
code tracks and modifies the checkpoint list so that backups can still
be taken with such a backing chain. This unfortunately requires to
rename few bitmaps (by copying and deleting them) in some cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a faked qemu output which would simulate scenario where libvirt
would take a snapshot and checkpoint simultaneously. This is visible in
libvirt-2-format node where bitmap 'c' appears, but bitmap 'b' which is
active in the previous layer is not present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add all intermediate steps and deletion of the current checkpoint on a
flat (single-image) disk image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add test infrastructure and a basic test for bitmap deletion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The location of virt-aa-helper shown in the docs is incorrect.
The helper binary is installed under libexec dir.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The configure script allows users to specify different paths for
/etc/, /usr/sbin/, /var/run/ and /usr/libexec/. Instead of
assuming user will pass expected value, generate the apparmor
profiles using the actual values.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This requires stealing one cmd pointer before returning it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Mark eligible declarations as g_autofree and remove
the corresponding VIR_FREE calls.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Always trim the full specified suffix.
All of the callers outside of tests were passing either
strlen or the actual length of the string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Replace all the cases that only supply the length
and do not care about matching a suffix, as well
as that one test case that does.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Just like the existing virBufferTrim, but only
does one thing at a time.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
LXC version 3 config files are still using network old style definition.
So, as LXC supports it now, they can be converted to use this new
definition.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Domain definition is useless now inside network structure. This pointer
was required because new network definition was being added each time
that a new network type appeared. So, this should be processed into
old function `lxcNetworkParseDataType()`. Now, as it was moved to an
array, it can be handle together each interface pointer.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
LXC version 3 or higher introduced indexes for network interfaces.
Libvirt should be able to parse entries like `lxc.net.2.KEY`. This
commit adds functions to parse this type of field. That's why array
structures are so important this time.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Struct lxcNetworkParseData is being used as a single pointer which
iterates through LXC config lines. It means that it will be applied as a
network each time that a new type appears. After, the same struct is
used to populate a new network interface. This commit changes this logic
to multiple lxcNetworkParseData to move this strcuture to an array. It
makes more sense if we are using indexes to fill interface settings.
This is better to improve code clarity.
This commit still introduces *Legacy() functions to keep support of
network old style definitions.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This will be the first QEMU version that will support the
kvm-no-adjvtime CPU feature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now, that every use of virAtomic was replaced with its g_atomic
equivalent, let's remove the module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In future commits our virAtomic* APIs will be replaced with their
GLib variants. Instead of trying to update the test after each
commit and eventually removing the test anyway, remove it upfront
and save the hassle.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of calling virAtomicIntAdd(&var, 1); we can call
g_atomic_int_add() directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
rpmlint complains about "script-without-shebang" due to the execute
permissions on /usr/share/bash-completion/completions/vsh. Use
INSTALL_DATA instead of INSTALL_SCRIPT to avoid the unnecessary
execute permissions.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The rewrite to use GLib's atomic ops functions changed the behavior
of virAtomicIntInc - before it returned the pre-increment value.
Most of the callers using its value were adjusted, but the one
in qemuDriverAllocateID was not. If libvirtd would reconnect to
a running domain during startup, the next started domain would get
the same ID:
$ virsh list
Id Name State
--------------------------
1 f28live running
1 f28live1 running
Use the g_atomic_add function directly (as recommended in viratomic.h)
and add 1 to the result.
This also restores the usual numbering from 1 instead of 0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 7b9645a7d1
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Starting on commit 1f43393283, qemuDomainFillDeviceIsolationGroup()
returns 0 in all circunstances. Let's turn it to 'void' make it
clearer that the function will not fail. This also spares a
check for < 0 return in qemu_hotplug.c. The
qemuDomainFillDeviceIsolationGroupIter() callback now returns
0 at all times - which is already happening anyway.
Refer to 1f43393283 commit message for more details on why
the function was changed to never return an error.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuDomainChrDefDropDefaultPath() returns an int, but it's
always returning 0. Callers are checking for result < 0 to
run their cleanup code needlessly.
Turn the function to 'void' and adjust the callers.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Avoid some of the virObjectUnref() calls by using g_autoptr.
Aside from the 'cleanup' label in qemuDomainSetFakeReboot(),
all other now deprecated cleanup labels will be removed in
the next patch.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autofree to remove VIR_FREE() calls used for cleanups.
Labels that became deprecated will be removed in a later
patch.
In qemuDomainSetupDisk(), the 'dst' variable is not used at
all and could be removed.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'caps' variable in qemuDomainObjPrivateXMLParseAutomaticPlacement()
is set to auto clean via g_autoptr(), but a 'virObjectUnref(caps)' is
being executed in the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previous patch used 'g_autofree' to eliminate instances of
VIR_FREE(), making some cleanup labels obsolete. This
patch removes them.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autofree in strings when possible to spare a VIR_FREE()
call. Unneeded 'cleanup' labels will be taken care of in the
next patch.
The 'str' string in virDomainVirtioSerialAddrReserve() was
never used by the logic, only being used in cleanup by
VIR_FREE(). Let's remove it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Swithc to the helper which doesn't require checking of the return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The data is gathered only once so we can move the whole block which
fetches the data out of the loop and get rid of the logic which
prevents multiple calls.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor the logic to skip the body of the function if there's nothing
to do.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are two calls to virHashNew which check the return value. It's not
necessary any more as virHashNew always returns a valid pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This module has last two direct checks whether the value returned by
virHashCreateFull is NULL. Remove them so that static analyzers don't
get the false idea that checking the value is necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the glib helpers and remove the mention of returning NULL on failure
of virHashNew, virHashCreate and virHashCreateFull.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is updating the releases and resources links so they point now to
crates.io for the releases and docs.rs for the api ref.
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@canonical.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Since
commit 201156ec6e
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Mon Dec 16 10:06:50 2019 +0000
docs: add pages to support Go module package resolution
it's possible to use
import "libvirt.org/libvirt-go"
import "libvirt.org/libvirt-go-xml"
in Go programs, which will result in the Go packages being
fetched directly from libvirt.org instead of GitHub.
The godoc website offers the API documentation for the updated
imports, and that's where we should send users.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We haven't ever made releases of the Go components, which makes
sense because that's just not how that specific ecosystem works.
For people who are looking to use libvirt from Go, the brief
introductory pages located at the same URLs used to import the
packages are a better entry point than an empty directory
listing, so let's send them there instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since a3ab6d42 "apparmor: convert libvirtd profile to a named profile"
the detection of the subelement for qemu_bridge_helper is wrong.
In combination with the older 123cc3e1 "apparmor: allow
/usr/lib/qemu/qemu-bridge-helper" it now detects qemu-bridge-helper no
more with its path, but instead as a proper subelement of the named profile
like: label=libvirtd//qemu_bridge_helper
In the same fashion the reverse rule in the qemu_bridge_helper
sub-profile still uses the path and not the named profile label.
Triggering denies like:
apparmor="DENIED" operation="file_inherit"
profile="libvirtd//qemu_bridge_helper" pid=5629 comm="qemu-bridge-hel"
family="unix" sock_type="stream" protocol=0 requested_mask="send receive"
denied_mask="send receive" addr=none peer_addr=none peer="libvirtd"
This patch fixes the unix socket rules for the communication between
libvirtd and qemu-bridge-helper to match that.
Fixes: a3ab6d42d8
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1655111
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Our nwfilter code doesn't set any timeout on the pcap packet buffer which
means that when DHCP snooping is enabled on a guest interface and
libvirt is trying to learn the IP address from guest's DHCP traffic, it
takes up to 4x longer to ping a guest successfully compared to a case
where nwfilter isn't enabled at all or libvirt uses the cached nwfilter
leases to populate the corresponding rules to ebtables.
With the pcap filter and rate limiting already in place, we should be
able to afford enabling the immediate packet delivery, FWIW immediate
mode was actually the default prior libpcap-1.5.0 (CentOS 6) regardless
of whether a buffer was requested.
The lack of any kind of timeout on the pcap buffer messed with the
libvirt TCK test suite which, even with a generous timeout in place,
timeouts every single time simply because it takes a while until
guest actually starts producing any kind of traffic to fill up
the buffer in place (apart from the DHCP traffic which happens fairly
early on).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
libpcap-1.5.0 introduced a function to enforce immediate mode (on all
platforms) which the follow-up patches will rely on.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
At the beginning of each profile we have a comment that says when
the profile was last updated. In theory, it makes sense because
one can see immediately if they are using an outdated profile.
However, we don't do a good job in keeping the comments in sync
with reality and also sysadmins should rather use their package
manager to find out libvirt version which installed the profiles.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
There are two more paths that we are missing in the default
domain profile: /usr/share/edk2-ovmf/ and /usr/share/sgabios/.
These exist on my Gentoo box and contain UEFI and BIOS images
respectively.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Even though we construct a domain specific profile for each
domain we start (which should cover domain specific paths), there
is also another file that is included from the profile and which
contains domain agnostic paths (e.g. to cover libraries that qemu
links with). The paths in the file are split into blocks divided
by comments. Sort the paths in each block individually (ignoring
case sensitivity).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
With Credit2 being Xen default scheduler, it's definitely the case to
allow Credit2's scheduling parameters to be get and set via libvirt.
This is easy, as Credit and Credit2 have (at least as of now) the very
same parameters ('weight' and 'cap'). So we can just let credit2 pass
the scheduler-type check and the same code will work for both.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Aside from itinerant error (actually warning) messages due to an
unrecognized response from qemu, this isn't even necessary - the
migration proceeds successfully to completion anyway.
(I'm not sure where to see this status reported in the API though - do
we need to add an extra state, or recognition of a new event somewhere?)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Normally a PCI hostdev can't be migrated, so
qemuMigrationSrcIsAllowedHostdev() won't permit it. In the case of a a
hostdev network interface that has <teaming type='transient'/> set,
QEMU will automatically unplug the device prior to migration, and
re-plug a corresponding device on the destination. This patch modifies
qemuMigrationSrcIsAllowedHostdev() to allow domains with those devices
to be migrated.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU driver uses the <teaming type='persistent|transient'
persistent='blah'/> element to setup a "failover" pair of devices -
the persistent device must be a virtio emulated NIC, with the only
extra configuration being the addition of ",failover=on" to the device
commandline, and the transient device must be a hostdev NIC
(<interface type='hostdev'> or <interface type='network'> with a
network that is a pool of SRIOV VFs) where the extra configuration is
the addition of ",failover_pair_id=$aliasOfVirtio" to the device
commandline. These new options are supported in QEMU 4.2.0 and later.
Extra qemu-specific validation is added to ensure that the device
type/model is appropriate and that the qemu binary supports these
commandline options.
The result of this will be:
1) The virtio device presented to the guest will have an extra bit set
in its PCI capabilities indicating that it can be used as a failover
backup device. The virtio guest driver will need to be equipped to do
something with this information - this is included in the Linux
virtio-net driver in kernel 4.18 and above (and also backported to
some older distro kernels). Unfortunately there is no way for libvirt
to learn whether or not the guest driver supports failover - if it
doesn't then the extra PCI capability will be ignored and the guest OS
will just see two independent devices. (NB: the current virtio guest
driver also requires that the MAC addresses of the two NICs match in
order to pair them into a bond).
2) When a migration is requested, QEMu will automatically unplug the
transient/hostdev NIC from the guest on the source host before
starting migration, and automatically re-plug a similar device after
restarting the guest CPUs on the destination host. While the transient
NIC is unplugged, all network traffic will go through the
persistent/virtio device, but when the hostdev NIC is plugged in, it
will get all the traffic. This means that in normal circumstances the
guest gets the performance advantage of vfio-assigned "real hardware"
networking, but it can still be migrated with the only downside being
a performance penalty (due to using an emulated NIC) during the
migration.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The subelement <teaming> of <interface> devices is used to configure a
simple teaming association between two interfaces in a domain. Example:
<interface type='bridge'>
<source bridge='br0'/>
<model type='virtio'/>
<mac address='00:11:22:33:44:55'/>
<alias name='ua-backup0'/>
<teaming type='persistent'/>
</interface>
<interface type='hostdev'>
<source>
<address type='pci' bus='0x02' slot='0x10' function='0x4'/>
</source>
<mac address='00:11:22:33:44:55'/>
<teaming type='transient' persistent='ua-backup0'/>
</interface>
The interface with <teaming type='persistent'/> is assumed to always
be present, while the interface with type='transient' may be be
unplugged and later re-plugged; the persistent='blah' attribute (and
in the one currently available implementation, also the matching MAC
addresses) is what associates the two devices with each other. It is
up to the hypervisor and the guest network drivers to determine what
to do with this information.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Presence of the virtio-net-pci option called "failover" indicates
support in a qemu binary of a simplistic bonding of a virtio-net
device with another PCI device. This feature allows migration of
guests that have a network device assigned to a guest with VFIO, by
creating a network bond device in the guest consisting of the
VFIO-assigned device and a virtio-net-pci device, then temporarily
(and automatically) unplugging the VFIO net device prior to migration
(and hotplugging an equivalent device on the migration
destination). (The feature is called "failover" because the bond
device uses the vfio-pci netdev for normal guest networking, but
"fails over" to the virtio-net-pci netdev once the vfio-pci device is
unplugged for migration.)
Full functioning of the feature also requires support in the
virtio-net driver in the guest OS (since that is where the bond device
resides), but if the "failover" commandline option is present for the
virtio-net-pci device in qemu, at least the qemu part of the feature
is available, and libvirt can add the proper options to both the
virtio-net-pci and vfio-pci device commandlines to indicate qemu
should attempt doing the failover during migration.
This patch just adds the qemu capabilities flag "virtio-net.failover".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
* chown: use is conditionally compiled
* configmake: functionality imported to Makefile.am
* getaddrinfo: we have no portability problems
with Windows impl
* getpass: simplified impl is imported
* mgetgroups: getgrouplist is used directly
* net_if: header includes are conditionalized
* netdb: header includes are conditionalized
* passfd: simplified impl is imported
* posix-shell: functionality was unused & removed
* sigaction: usage is conditionalized
* sigpipe: usage is conditionalized
* stat-time: struct stat is used directly
* strchrnul: usage is eliminated
* strtok_r: usage is not a portability problem
* sys_stat: usage is conditionalized
* uname: rewritten to use native Win32 function to
get host arch
* waitpid: usage is conditionalized
* wcwidth: rewritten using g_unichar APIs
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The EAI_ADDRFAMILY constant has been removed from FreeBSD
headers, supposedly because it is deprecated by new RFC
drafts.
Previously GNULIB was providing a replacement because
MinGW lacked it too. The replacement provided for MinGW
was thus being used on FreeBSD too, but with a completely
bogus integer value.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
SIGPIPE is not available on the Windows platform.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are a large number of different header files that
are related to the sockets APIs. The virsocket.h header
includes all of the relevant headers for Windows and UNIX
in one convenient place. If virsocketaddr.h is already
included, then there's no need for virsocket.h
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
chown and some stat constants are not available on
the Windows platform.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The O_BINARY flag is not defined on all platforms so we must
conditionalize its use once we remove GNULIB.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The O_DIRECT flag is not available on all platforms, so we
must introduce a compat define the same way gnulib does.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The F_DUPFD_CLOEXEC functionality is not available on
some platformms. We must thus explicitly call the
virSetCloexec function once we remove GNULIB's equiv
fix for this.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Windows uses _O_NOINHERIT as the name for its O_CLOEXEC
equivalent. Define O_CLOEXEC to match this to fix
portability when we remove GNULIB.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The O_DIRECTORY flag causes open() to return an error
if the filename is a directory. There's no obvious
reason why resctrl needs to use this, while the rest of
libvirt code does not. Removing it avoids build issues
on platforms where O_DIRECTORY is not defined, once we
remove GNULIB.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The AC_USE_SYSTEM_EXTENSIONS macro causes things like
"USE_GNU" to be defined, which enables access to OS
specific extensions to POSIX. We currently got this
indirectly via GNULIB's 'extensions' module which is
a dependancy of other GNULIB modules we use.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The S_ISSOCK macro is not available on Windows platforms.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We currently get the sys/ioctl.h check indirectly
via GNULIB, but this will soon stop happening.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The net/if.h is not portable so we must check for its
existance and avoid using it when missing. Some use
of net/if.h was redundant and could be removed.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Many of the virProcess APIs are relying on GNULIB providing
POSIX API stubs. Even with these stubs the APIs don't do
anything useful once compiled. We can thus conditionalize
the code so that we don't compile anything at all.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Cygwin is not a supported build platform for libvirt and
has no testing coverage in our CI systems. Stop pretending
the code is usable and remove it so there is less to port
to Meson.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A large part of the virCommand code is still built on
WIN32, despite the fact that the core fork() & execve()
functions are not available. So despite succesfully
building most of the code, at runtime the APIs are
none the less unusuable. With the elimination of GNULIB
many of the APIs being used in this code no longer have
portability wrappers/shims for Windows.
Rather than try to add portability wrappers, or do tests
for each individual function, it is clearer to conditionalize
nearly all of the code using #ifdef WIN32.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_mkdir() provides portability to Windows platforms.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The sys/uio.h header is only needed when building logging
code with journald support enabled. Conditionally include
it so that we avoid break on platforms which lack this
header.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The Windows platform does not have the signal handling
support we need, so it must be disabled in several parts
of the codebase.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a simplified variant of gnulib's passfd module
without the portability code that we do not require.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The gnulib stat-time.h header provides wrapper functions
to hide the differences in 'struct stat' between various
platforms.
Linux and FreeBSD support the same names, except for
birthtime which Linux only provides in the new 'statx()'
syscall we're not using. macOS has completely different
naming. Since we only rely on this code in one place
we just use conditionals at time of need.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virProcess code relies on windows.h and is getting it
indirectly via some GNULIB header fixes. This dependancy
needs to be made explicit.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The combination of g_unichar_iszerowidth and
g_unichar_iswide is sufficient to replicate the logic
of wcwidth() for libvirt.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The mgetgroups function is a GNULIB custom wrapper around
getgrouplist(). This implements a simplified version of
that code directly.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we rely on gnulib creating configmake.h, but we
can easily create it ourselves instead.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The strchrnul function doesn't exist on Windows and rather
than attempt to implement it, it is simpler to just avoid
its usage, as any callers are easily adapted.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This imports a simpler version of GNULIB's getpass() function
impl for Windows. Note that GNULIB's impl was buggy as it
returned a static string on UNIX, and a heap allocated string
on Windows. This new impl always heap allocates.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of relying on GNULIb's uname() impl, directly use the
Windows API for determining CPU architecture.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the tests appear to reference a SHELL env variable
explicitly and they all succeeed when it is not set. This
eliminates the only use of the gnulib posix-shell module.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We currently note that the QEMU embedded driver is experimental
in the drvqemu.html file, but we should do the same in the
virt-qemu-run man page.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Files inside /dev/vfio/ can't be opened more than once, meaning
that any subsequent open calls will fail. This behavior was
introduced in kernel v3.11, commit 6d6768c61b39.
When using the VFIO driver, we open a FD to /dev/vfio/N and
pass it to QEMU. If any other call attempt for the same
/dev/vfio/N happens while QEMU is still using the file, we are
unable to open it and QEMU will report -EBUSY. This can happen
if we hotplug a PCI hostdev that belongs to the same IOMMU group
of an existing domain hostdev.
The problem and solution is similar to what we already dealt
with for TPM in commit 4e95cdcbb3. This patch changes both
DAC and SELinux drivers to disable 'remember' for VFIO hostdevs
in virSecurityDACSetHostdevLabelHelper() and
virSecurityDACSetHostdevLabel(), and 'recall'
in virSecurityDACRestoreHostdevLabel() and
virSecuritySELinuxRestoreHostdevSubsysLabel().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There is a case in which we do not want 'remember' to be
set to true in SetOwnership() calls inside the
HostdevLabelHelper() functions of both DAC and SELinux drivers.
Next patch will explain and handle that scenario.
For now, let's make virSecurityDACSetOwnership() and
virSecuritySELinuxSetHostdevLabelHelper() accept a 'remember'
flag, which will be used to set the 'remember' parameter
of their respective SetOwnership() calls. No functional
change is made.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The --strict arg forces the rst tools to abort with an error instead
of printing warnings to stderr, or the output document.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
You can't have two links with the same text when using named
link references (a single "_"). If you need multiple links
with the same text you must use anonymous link references
(a double "_").
There are also some duplicate section headers causing the
same problem with duplicate link targets.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently when disk is removed from iotune group (by setting
all tunables to zero) group name is leaved in config. Let's fix
it.
Given iotune defaults are taken from the destination group setting
tunables to zero may require different set of zero settings in API
call. Let's prohibit removing from group while specifying different
group name then current for the sanity sake.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For example if disk is not in the group and we want to move it
there then it makes sense to specify only the group name in API call.
Currently the destination group iotune settings will be overwritten
with the disk settings which I would say is not what one would expect.
Thus let's get defaults from the group we are moving to.
And if we are moving the brand new group then is makes sense to
copy the current disk iotune settings to the group.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virDomainSetBlockIoTune not simply sets the iotune params given in API
but use current settings for all the omitted params. Unfortunately
it uses current settings for active config when setting inactive
params. Let's fix it.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently it is possible to start a domain which have disks
in same iotune group and at the same time having different iotune
params. Both params set are passed to qemu in command line and the one
that is passed later down command line is get actually set.
Let's prohibit such configurations.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently upon successfull call to qemu's implementation of
virDomainSetBlockIoTune iotune settings are changed only for the
disk given in API if the disk is in iotune group while we need
to change the settings for all disks in the group.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, if only iotune group name is given for some disk and
no any params then later start of domain will fail. I guess it
will be convenient to allow such configuration if there is
another disk in the same iotune group with iotune params set. The
meaning is that the first disk have same iotunes and the latter.
Thus one can easily add a disk to iotune group - just add group
name parameter and no need to copy all the params.
Also let's expand iotunes params in the described case so we don't
need to refer to another disk to know iotunes and this will make
logic in many places simple.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Discourage passing secrets as commandline arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Simplify human usage of secret-set-value by adding --interactive which
will read the value of the secret from the terminal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow using the contents of --file without base64 decoding.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Print a warning if users pass in secrets as command line arguments and
mention it in the man page.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The necessity to specify the secret value as command argument is
insecure. Allow reading the secret from a file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Users might want to get the raw value instead of dealing with base64
encoding. This might be useful for redirection to file and also for
simple human-readable secrets.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Automatically clean the secret object and get rid of the cleanup label
and 'ret' valiable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Automatically clean the secret object and get rid of the cleanup label
and 'ret' valiable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Similarly to other libvirt object freeing APIs the function resets the
libvirt error when called and doesn't take NULL gracefully. Install the
workaround and g_autoptr handlers similarly to the 'virshDomain' type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some *ParseXML functions have comments stating what kind of device
they parse with an outdated list of parameters, with the exception
of virDomainFSDefParseXML which claims to parse a disk.
Remove them, assuming the function names are descriptive enough.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All the callees return either 0 or -1 so there is no need
for propagating the value. And we bail on the first error.
Remove the variable to make the function simpler.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We have a helper variable to make the code more concise,
use it consistently.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that the cleanup section is empty, eliminate the cleanup
label as well as the 'ret' variable.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use the g_auto macros wherever possible to eliminate the cleanup
section.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use the virXMLFormatElement helper to format the driver element
to simplify adding further sub-elements.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
A few new companies and individuals contributed to libvirt since
the last time the gitdm configuration was updated.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The template still references libvirt-qemu-shim, which was at one
point the name used to refer to what we now know as virt-qemu-run.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
A recent commit added an error check for too-nested backing chains
followed by a return, even though errors above jump to cleanup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: b168fa88b8
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Fix a documentation generation error:
System Message: WARNING/2 (<stdin>, line 15); backlink
Inline literal start-string without end-string.
As well as the 'independant' typo.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: d600667278
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The algorithm is used in two places to find the parent checkpoint object
which contains given disk and then uses data from the disk. Additionally
the code is written in a very non-obvious way. Factor out the lookup of
the disk into a function which also simplifies the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The function has no users now and there's no need for it as the common
pattern is to look up the whole disk object anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a disk is unplugged and then the user tries to delete a checkpoint
the code would try to use NULL node name as it was not checked.
Fix this by fetching the whole disk definition object and verifying it
was found.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Lookup the whole disk definition rather than just the node name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Upcoming patches will also use the domain disk definition. Rename disk
to chkdisk for clarity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Upcoming patches will also use the domain disk definition. Rename disk
to chkdisk for clarity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemuCheckpointDiscard is a massive function that can be separated into
smaller bits. Extract the part that actually modifies the disk from the
metadata handling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-5.0 will drop pre pc-1.0 machine types. Remove them from our
faked capabilities test suite. If a feature depends on a machine type it
shall be tested with real data and not with this hack.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
None of the tests depend on anything that the machine type would
influence. This will allow us to drop the very old machine type from the
non-real-data tests. If something depends on the machine type it should
be tested with real data rather than this hack.
Note that these tests are run only in the XML->XML suite because the
XML->argv suite doesn't work with the network driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
None of the tests depend on anything that the machine type would
influence. This will allow us to drop the very old machine type from the
non-real-data tests. If something depends on the machine type it should
be tested with real data rather than this hack.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Based on upstream commit 3e08b2b9cb64. This version already dropped the
pre-historic machine types and supports only machine types starting from
'pc-1.0'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the old machine type which will be dropped in the upcomming
qemu-5.0 release from tests used against the most recent capabilities
data.
None of the modified tests really cares about the actual machine type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Skip the step of adding all of the fake machine types which are required
for the legacy tests in case when we are testing with real capabilities.
Faking any data in the real capabilities undermines the point of testing
with real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Test code will need to know whether the virQEMUCaps object contains any
machine types already. Add a helper and expose it via 'qemu_capspriv.h'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The previous approac of just purging the alias combined with the fact
that we filled in fake machine types in the test data meant that if a
test case used an alias machine type such as 'pc' or 'q35' it would not
properly resolve to the actual data returned by qemu.
This started to be a problem since the CPU driver now looks at the
default CPU reported with the machine type.
This patch replaces the original approach of just removing the alias by
replacing it with a copy of the machine type data which the type would
alias to. This means that we are using the real data while we don't
modify the test output after every qemu upgrade.
Additionally this change will allow us to drop adding the fake machine
types later.
The test fallout is from actually excercising the CPU driver with
actual data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Separate out the internals as they will become more complex soon.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Every supported qemu is able to return the list of machine types it
supports so we can start validating it against that list. The advantage
is a better error message, and the change will also prevent having stale
test data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Enumerate all missing machine types for all missing architectures for
the fake capabilities used in many existing tests. This will allow
stricter validation whether qemu actually supports given machine type
since we already have some behaviour dependant on the actual machine
type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the 's390-ccw-virtio' machine type which is actually supported by
the qemu we gathered the test data from.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This machine type comes from downstream ubuntu 15.10. Replace it with a
somewhat equivalent qemu-2.3 machine type as we do have test data for
that.
The change allows the CPU code to pick a proper default CPU in the
'-latest' cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use 'versatilepb' instead of a fake 'non-virt' machine type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For testing with synthetic capabilities we pre-fill the qemu
capabilities with some machine types. Historically there were two arrays
for KVM and TCG but that's not necessary. Make both instances of x86_64
data share the same array as the other architectures do.
This will later on simplify filling in all the other machine types which
are required for the test suite.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The tests prefixed default-video* were enabled only for the xml2xml
testing and used impossible configurations.
Enable them for xml2argv testing fix them:
1) aarch64: remove pointless cpu mode
2) s390x: remove pointless cpu and use existing machine type
3) riscv: remove pointless cpu
4) x86: remove pointless cpu and use existing machine type
5) ppc65: use correct machine type and enable USB
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
XML->XML testing uses DO_TEST_CAPS_LATEST so use it also for the
XML->argv testing. Additionally use the same more modern machine type
in both tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Mirror what's done in the xml2argv test and use recent capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The data is tested against the latest qemu binaries so we should use the
proper architecture. Also the test is used against data from qemu 1.5.3
and thus we should use a machine type that qemu supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Debian/Ubuntu linkers are more strict that other distros requiring glib
to be linked explicitly.
macOS needs -export-dynamic instead of -Wl,--export-dynamic
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Similarly to 510d154a0b we need to prevent
doing too deeply nested backing chains and reject them with a sane error
message.
Add a loop to go through the snapshots prior to attempting actually
creating them to prevent some possible inconsistent scenarios.
We don't need to do it when reusing backing chains as we'll be
re-detecting the backing chain in that case anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Don't adopt the backing store data when reusing images provided by the
user. This will force a backing chain re-probe as users might have
passed in something unexpected in the overlay where our view of the
backing chain would not correspond.
This is done only for inactive snapshots as there we have way less
verification.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Currently the libvirt Go modules are accessed by applications using
their github repository URLs. This is undesirable as we don't want
applications to have a direct dependancy on a specific source repo
location. We want to enable applications to use the Go packages via
the libvirt.org namespace.
When you do "go get libvirt.org/libvirt-go", the Go client will do an
HTTPS request to that URL, and parse the HTML content to look for a
<meta> tag which tells it where to the find the GIT repository.
https://golang.org/cmd/go/#hdr-Remote_import_paths
This adds two pages to support this Go module resolution. They are
not linked from anywhere as we don't expect users to actually look
at them. If someone does happen upon them, there's some boilerplate
text to send them off to godoc.org for API documentation.
Since the pages we're adding have a .html extension, we will also
use a small apache config tweak on the server
RewriteEngine on
RewriteRule ^/libvirt-go$ /libvirt-go.html [L]
RewriteRule ^/libvirt-go-xml$ /libvirt-go-xml.html [L]
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The previous "QEMU shim" proof of concept was taking an approach of only
caring about initial spawning of the QEMU process. It was then
registered with the libvirtd daemon who took over management of it. The
intent was that later libvirtd would be refactored so that the shim
retained control over the QEMU monitor and libvirt just forwarded APIs
to each shim as needed. This forwarding of APIs would require quite alot
of significant refactoring of libvirtd to achieve.
This impl thus takes a quite different approach, explicitly deciding to
keep the VMs completely separate from those seen & managed by libvirtd.
Instead it uses the new "qemu:///embed" URI scheme to embed the entire
QEMU driver in the shim, running with a custom root directory.
Once the driver is initialization, the shim starts a VM and then waits
to shutdown automatically when QEMU shuts down, or should kill QEMU if
it is terminated itself. This ought to use the AUTO_DESTROY feature but
that is not yet available in embedded mode, so we rely on installing a
few signal handlers to gracefully kill QEMU. This isn't reliable if
we crash of course, but you can restart with the same root dir.
Note this program does not expose any way to manage the QEMU process,
since there's no RPC interface enabled. It merely starts the VM and
cleans up when the guest shuts down at the end. This program is
installed to /usr/bin/virt-qemu-run enabling direct use by end users.
Most use cases will probably want to integrate the concept directly
into their respective application codebases. This standalone binary
serves as a nice demo though, and also provides a way to measure
performance of the startup process quite simply.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This enables support for running the secret driver embedded to the
calling application process using a URI:
secret:///embed?root=/some/path
When using the embedded mode with a root=/var/tmp/embed, the
driver will use the following paths:
configDir: /var/tmp/embed/etc/secrets
stateDir: /var/tmp/embed/run/secrets
These are identical whether the embedded driver is privileged
or unprivileged.
This compares with the system instance which uses
configDir: /etc/libvirt/secrets
stateDir: /var/lib/libvirt/secrets
When an embedded instance of the secret driver is open, any other
embedded drivers will automatically use the embedded secret driver.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This enables support for running QEMU embedded to the calling
application process using a URI:
qemu:///embed?root=/some/path
Note that it is important to keep the path reasonably short to
avoid risk of hitting the limit on UNIX socket path names
which is 108 characters.
When using the embedded mode with a root=/var/tmp/embed, the
driver will use the following paths:
logDir: /var/tmp/embed/log/qemu
swtpmLogDir: /var/tmp/embed/log/swtpm
configBaseDir: /var/tmp/embed/etc/qemu
stateDir: /var/tmp/embed/run/qemu
swtpmStateDir: /var/tmp/embed/run/swtpm
cacheDir: /var/tmp/embed/cache/qemu
libDir: /var/tmp/embed/lib/qemu
swtpmStorageDir: /var/tmp/embed/lib/swtpm
defaultTLSx509certdir: /var/tmp/embed/etc/pki/qemu
These are identical whether the embedded driver is privileged
or unprivileged.
This compares with the system instance which uses
logDir: /var/log/libvirt/qemu
swtpmLogDir: /var/log/swtpm/libvirt/qemu
configBaseDir: /etc/libvirt/qemu
stateDir: /run/libvirt/qemu
swtpmStateDir: /run/libvirt/qemu/swtpm
cacheDir: /var/cache/libvirt/qemu
libDir: /var/lib/libvirt/qemu
swtpmStorageDir: /var/lib/libvirt/swtpm
defaultTLSx509certdir: /etc/pki/qemu
At this time all features present in the QEMU driver are available when
running in embedded mode, availability matching whether the embedded
driver is privileged or unprivileged.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The driver URI scheme:
"$drivername:///embed?root=/some/path"
enables a new way to use the drivers by embedding them directly in the
calling process. To use this the process must have a thread running the
libvirt event loop. This URI will then cause libvirt to dynamically load
the driver module and call its global initialization function. This
syntax is applicable to any driver, but only those will have been
modified to support a custom root directory and embed URI path will
successfully open.
The application can now make normal libvirt API calls which are all
serviced in-process with no RPC layer involved.
It is required to specify an explicit root directory, and locks will be
acquired on this directory to avoid conflicting with another app that
might accidentally pick the same directory.
Use of '/' is not explicitly forbidden, but note that the file layout
used underneath the embedded driver root does not match the file
layout used by system/session mode drivers. So this cannot be used as
a backdoor to interact with, or fake, the system/session mode drivers.
Libvirt will create arbitrary files underneath this root directory. The
root directory can be kept untouched across connection open attempts if
the application needs persistence. The application is responsible for
purging everything underneath this root directory when finally no longer
required.
Even when a virt driver is used in embedded mode, it is still possible
for it to in turn use functionality that calls out to other secondary
drivers in libvirtd. For example an embedded instance of QEMU can open
the network, secret or storage drivers in the system libvirtd.
That said, the application would typically want to at least open an
embedded secret driver ("secret:///embed?root=/some/path"). Note that
multiple different embedded drivers can use the same root prefix and
co-operate just as they would inside a normal libvirtd daemon.
A key thing to note is that for this to work, the application that links
to libvirt *MUST* be built with -Wl,--export-dynamic to ensure that
symbols from libvirt.so are exported & thus available to the dynamically
loaded driver module. If libvirt.so itself was dynamically loaded then
RTLD_GLOBAL must be passed to dlopen().
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The intent here is to allow the virt drivers to be run directly embedded
in an arbitrary process without interfering with libvirtd. To achieve
this they need to store all their configuration & state in a separate
directory tree from the main system or session libvirtd instances.
This can be useful for doing testing of the virt drivers in "make check"
without interfering with the user's own libvirtd instances.
It can also be used for applications using KVM/QEMU as a piece of
infrastructure to build an service, rather than for general purpose
OS hosting. A long standing example is libguestfs, which would prefer
if its temporary VMs did show up in the main libvirtd VM list, because
this confuses apps such as OpenStack Nova. A more recent example would
be Kata which is using KVM as a technology to build containers.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If a domain is configured to have an egl-headless display and a virtio
video device, virgl will be enabled automatically within the guest, even
if the video device is configured with accel3d='no'.
In this case we should explicitly pass 'virgl=off' to qemu.
See https://bugzilla.redhat.com/show_bug.cgi?id=1791236 for more
information.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'builtin' rng backend model can be used as following:
<rng model='virtio'>
<backend model='builtin'/>
</rng>
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For qemu object like rng-builtin, there are no properties after id
property. We should always set comma after object id. Otherwise it will
cause trailing comma on object:
-object rng-builtin,id=ID,
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is used to check if qemu is capable of rng-builtin object.
This object is added since qemu-4.2.0-rc0, commit 6c4e9d48.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since v5.6.0-48-g270583ed98 we try to cache domain capabilities,
i.e. store filled virDomainCaps in a hash table in virQEMUCaps
for future use. However, there's a race condition in the way it's
implemented. We use virQEMUCapsGetDomainCapsCache() to obtain the
pointer to the hash table, then we search the hash table for
cached data and if none is found the domcaps is constructed and
put into the table. Problem is that this is all done without any
locking, so if there are two threads trying to do the same, one
will succeed and the other will fail inserting the data into the
table.
Also, the API looks a bit fishy - obtaining pointer to the hash
table is dangerous.
The solution is to use a mutex that guards the whole operation
with the hash table. Then, the API can be changes to return
virDomainCapsPtr directly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1791790
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When fixing [1] I've ran attached reproducer and had it spawn
1024 threads and query capabilities XML in each one of them. This
lead libvirtd to hit the RLIMIT_NOFILE limit which was kind of
expected. What wasn't expected was a subsequent segfault. It
happened because virCPUProbeHost failed and returned NULL. We've
taken the NULL and passed it to virCapabilitiesHostNUMARef()
which dereferenced it. Code inspection showed the same flas in
virQEMUDriverGetHostNUMACaps(), so I'm fixing both places.
1: https://bugzilla.redhat.com/show_bug.cgi?id=1791790
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The virCapabilitiesGetNodeInfo() function has the usual return
value semantics for integeres: a negative value means an error,
zero or a positive value means success. However, the function
call done in virCPUProbeHost() doesn't check for the return value
accordingly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Don't use ERANGE as it doesn't make much sense in the error message.
Also point out that the reply from qemu was too large which is not
obvious from the original error:
error: No complete monitor response found in 10485760 bytes: Numerical result out of range
The new message will read:
error: internal error: QEMU monitor reply exceeds buffer size (10485760 bytes)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
libvirt treats 'luks' images as raw+encryption. The logic in
qemuBlockStorageSourceCreateFormat skipped the creation if the requested
image was raw but didn't take into account the encryption.
This manifested itself e.g. when attempting to do a virsh blockcopy with
the following XML:
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/tmp/enccpy'>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccc2f80d6f'/>
</encryption>
</source>
</disk>
Where qemu would report the following error:
unable to execute QEMU command 'blockdev-add': Volume is not in LUKS format
rather than actually formatting the image first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Test that adding a duplicate entry is rejected properly. This also
allows to see the error message of the duplicate key addition in verbose
mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If we get a user reporting this error message being shown it's pretty
useless in terms of actually debugging it since we don't know which hash
and which key are actually subject to the error.
This patch adds a new hash table callback which formats the
user-readable version of the hash key and reports it in the new message
which will look like:
"Duplicate hash table key 'blah'"
That way we will at least have an anchor point where to start the
search.
There are two special implementations of keys which are numeric so we
add specific printer functions for them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the user-configured name of the bitmap when merging the appropriate
bitmaps for an incremental backup so that the user can see it as
configured. Additionally expose the default bitmap name if nothing is
configured.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Pass the exportname as configured when exporting the image via NBD and
fill it with the default if it's not configured.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If users wish to use different name for exported disks or bitmaps
the new fields allow to do so. Additionally they also document the
current settings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When using blockdev configurations the 'device' argument of
'blockdev-commit' must correspond to the topmost node in the block node
graph. Libvirt didn't do this properly in case when 'copy_on_read'
option was enabled on the disk.
Use qemuDomainDiskGetTopNodename to fix it when calling block-commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When using blockdev configurations the 'device' argument of
'blockdev-mirror' must correspond to the topmost node in the block node
graph. Libvirt didn't do this properly in case when 'copy_on_read'
option was enabled on the disk.
Use qemuDomainDiskGetTopNodename to fix it for the blockdev-mirror calls
in qemuDomainBlockCopy and the non-shared-storage migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There are more places which require getting the topmost nodename to be
passed to qemu. Separate it out into a new function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a mirror job fails to start in -blockdev mode we'd not unplug the
backing files we added first because the code on the error path checked
the wrong value. 'rc' is used as status of the code which added the
images, but the state of the 'block(dev)-mirror' call is stored in 'ret'
at that point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The virConnectGetDomainCapabilities API accepts either a binary path
to the emulator, or desired guest arch. If guest arch is not given,
then the host arch is assumed.
In the case where the binary is not given, the code tried to find the
emulator binary in the existing list of cached emulator capabilities.
This is not valid since we switched to lazy population of the cache in:
commit 3dd91af01f
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Mon Dec 2 13:04:26 2019 +0000
qemu: stop creating capabilities at driver startup
As a result of this change, if there are no persistent guests defined
using the requested guest architecture, virConnectGetDomainCapabilities
will fail to find an emulator binary.
The solution is to stop relying on the cached capabilities to find the
binary and instead use the same logic we use to pick default a binary
per arch when populating capabilities.
Tested-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The "ps2" bus is only available on certain machines like x86. On
machines like s390x, we should refuse to add a device to this bus
instead of silently ignoring it.
Looking at the QEMU sources, PS/2 is only available if the QEMU binary
has the "i8042" device, so let's check for that and only allow "ps2"
devices if this QEMU device is available, or if we're on x86 anyway
(so we don't have to fake the QEMU_CAPS_DEVICE_I8042 capability in
all the tests that use <input ... bus='ps2'/> in their xml data).
Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1763191
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
LXC driver is not able to retrieve IP addresses from domains. This
function was not implemented yet. It can be done using DHCP lease and
ARP table. Different from QEMU, LXC does not have an agent to fetch
this info, but other sources can be used.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU driver has two functions: qemuGetDHCPInterfaces() and
qemuARPGetInterfaces() that are being used inside only one single
function. They can be turned into generic functions that other drivers
can use. This commit move both from QEMU driver tree to domain conf
tree.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Simplify function logic by using g_autofree to free local variables so
that we can remove some goto statements that are used for cleanup.
Introduce a g_autoptr cleanup function for virNodeDeviceDef.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since commit <60d9ad6f1e42618fce10baeb0f02c35e5ebd5b24> we require
GnuTLS and since commit <ac0d21c762351f58dd5d2dafa2014ed48a8b49f3>
we can actually drop the usage of WITH_GNUTLS.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If virHostdevManagerGetDefault in qemuhotplugtest fails it works
for quite a while to later segfault when accessing
mgr->activePCIHostdevs.
Report the error details and break on a failed init to see the
real issue right away.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The libxl driver already tries to call shutdown inhibit callback in the
right places, but only if it's set. That last part was missing,
resulting in premature shutdown when running libvirtd
--timeout=...
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
You normally want to run the locally compiled copy of virsh. Trying
to run the installed version with the locally compiled library is a
recipe for problems with missing symbols and so on. By adding tools
to the path we can ensure that (eg) the libguestfs test suite will use
compatible copies of the library and virsh.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Running bootstrap and autoreconf from autogen.sh produced different
files in build-aux directory. The reason is that gnulib usually have
newer version of these files and overwrites them after the autoreconf
step.
In order to fix it remove the --install and --force options, in addition
introduce --verbose option in order to reflect what bootstrap is doing.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The existence of AUTHORS file is required for GNU projects but since
commit <8bfb36db40f38e92823b657b5a342652064b5adc> we do not require
these files to exist.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We already ignore most of these files and the .gitignore files as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We are in process of removing gnulib and adopting meson as our build
system. In order to help with the transition let's drop gnulib tests.
This will also help with the fact that before we will be able to drop
gnulib completely we will store output of bootstrap in git.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It is pulled in by tests and used by our build system as well.
Make an explicit dependency on threadlib. This can be later removed
by using GLib GThread.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We already use this function and so far we've been lucky that the same
check is done by gnulib. This will change once we will drop gnulib and
also make it obvious that we have to do the same check in Meson as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The function virSecretGetSecretString calls into secret driver and is
used from other hypervisors drivers and as such makes more sense in
util.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reported at build time by lintian:
manpage-section-mismatch usr/share/man/man8/virt-sanlock-cleanup.8.gz:3 8 != 1
And indeed the rst file says 1 while the makefile say 8:
if WITH_SANLOCK
manpages8_rst += manpages/virt-sanlock-cleanup.rst
else ! WITH_SANLOCK
8 "System administration commands and daemons" seems to match, so fix
the rst file to match.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Remove many imports of sys/ioctl.h which are redundant,
and conditionalize remaining usage that needs to compile
on Windows platforms.
The previous change to remove the "nonblocking" gnulib
module indirectly caused the loss of the "ioctl" gnulib
module that we did not explicitly list in bootstrap.conf
despite relying on.
Rather than re-introduce the "ioctl" module this patch
makes it redundant.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This fixes a build bug introduced by
commit fbf27730a3
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Mon Dec 16 11:16:51 2019 +0000
conf: add support for specifying CPU "dies" parameter
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When parsing legacy NBD backing file strings such as
'nbd:unix:/tmp/sock:exportname=/' we'd fail to set the transport to
VIR_STORAGE_NET_HOST_TRANS_UNIX. This started to be a problem once we
actually started to generate config of the backing store on the command
line with -blockdev as the JSON code would try to format it as TCP and
fail with:
internal error: argument key 'host' must not have null value
Set the type properly and add a test.
This bug was found by the libguestfs test suite in:
https://bugzilla.redhat.com/show_bug.cgi?id=1791614
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reported-by: Ming Xie <mxie@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
* send, recv: we use write & read for sockets so don't
need these portability wrappers
* ioctl, fcntl, fcntl-h: any usage of these is conditionally
compiled and excludes Windows
* ttyname_r: this exists in all supported platforms that
we require now
* environ: the tests explicitly declare this global variable
* intprops: the code has been converted / simplified
* nonblocking: we have a custom impl now to work with our
own sockets wrappers
* openpty: custom checks in configure.ac cope with portability
* accept, bind, connect, getpeername, getsockname, listen,
setsockopt, socket: code needing Windows portability uses
our wrapper functions
* close: avoids abort when passed invalid FD on Windows.
Our VIR_FORCE_CLOSE wrapper avoids calling close(-1)
and it is reasonable to abort in other scenarios in
the RPC client
* physmem: the gnulib code has been partially imported
* warnings, manywarnings: copy the files directly into
our local m4 dir
* verify: replaced by G_STATIC_ASSERT
* pthread_sigmask: none of the fixed portability problems
affect libvirt's usage on current supported platforms
* termios: the header is now conditionally included only
when needed
* time_r: replaced with GDateTime APIs
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
gmtime_r/localtime_r are mostly used in combination with
strftime to format timestamps in libvirt. This can all
be replaced with GDateTime resulting in simpler code
that is also more portable.
There is some boundary condition problem in parsing POSIX
timezone offsets in GLib which tickles our test suite.
The test suite is hacked to avoid the problem. The upsteam
GLib bug report is
https://gitlab.gnome.org/GNOME/glib/issues/1999
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The GNULIB termios module ensures termios.h exists (but
is none the less empty) when building for Windows. We
already exclude usage of the functions that would exist
in a real termios.h, so having an empty termios.h is
not especially useful.
It is simpler to just put all use of termios.h related
functions behind a "#ifndef WIN32" conditional.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
G_STATIC_ASSERT() is a drop-in functional equivalent of
the GNULIB verify() macro.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Libvirt's original atomic ops impls were largely copied
from GLib's code at the time. The only API difference
was that libvirt's virAtomicIntInc() would return a
value, but g_atomic_int_inc was void. We thus use
g_atomic_int_add(v, 1) instead, though this means
virAtomicIntInc() now returns the original value,
instead of the new value.
This rewrites libvirt's impl in terms of g_atomic_int*
as a short term conversion. The key motivation was to
quickly eliminate use of GNULIB's verify_expr() macro
which is not a direct match for G_STATIC_ASSERT_EXPR.
Long term all the callers should be updated to use
g_atomic_int* directly.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We don't need all the platforms gnulib deals with, so
this is a cut down version of GNULIB's physmem.c
code. This also allows us to integrate libvirt's
error reporting functions closer to the error cause.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert to use socket wrappers. Aside from the header file
include change, this requires changing close -> closesocket
since our portability isn't trying to replace the close
function.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Windows sockets take a SOCKET HANDLE object instead of a
file descriptor. Wrap them in the same way that gnulib
does so that they use C runtime file descriptors.
While we could in theory use GSocket, it is hard to get
the exact same semantics libvirt has for its current
socket usage. Wrapping the Winsock2 APIs is thus the
easiest approach in the short term.
In changing the socke wrappers we need to re-implement
the nonblocking function too, since the GNULIB impl
expects to be used with the GNULIB sockets wrappers.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All UNIX platforms we care about have openpty() in the libutil
library. Use of pty.h must also be made conditional, excluding
Win32.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some syntax check rules validate usage of headers provided
by gnulib. We want to validate these only against the gnulib
modules we've chosen to use, not all modules, since we're
trying to eliminate them.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some UNIX platforms don't declare 'environ' in their
header files. We can unconditionally declare it ourselves
to avoid this problem.
There is no need to do this in the aa-helper code
since that is Linux only code.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The GLib g_size_checked_mul() function is not quite the
same signature, and gives compiler warnings due to not
correctly casting from gsize to guint64/32. Implementing
a replacement for INT_MULTIPLY_OVERFLOW is easy enough
to do ourselves.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a vastly simpler VIR_INT64_STR_BUFLEN constant
which is large enough for all cases where we currently
use INT_BUFSIZE_BOUND. This eliminates most use of the
gnulib intprops.h header.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
RHEL7 has libcurl 7.29.0, which is the oldest of any
supported build platform. Thus we no longer need the
back compat for libcurl < 7.28.0.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Switch from old VIR_ allocation APIs to glib equivalents.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function potentially grabs both a monitor job and an agent job at
the same time. This is problematic because it means that a malicious (or
just buggy) guest agent can cause a denial of service on the host. The
presence of this function makes it easy to do the wrong thing and hold
both jobs at the same time. All existing uses have already been removed
by previous commits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to avoid holding an agent job and a normal job at the same
time, we want to avoid accessing the domain's definition while holding
the agent job. To achieve this, qemuAgentGetFSInfo() only returns the
raw information from the agent query to the caller. The caller can then
release the agent job and then proceed to look up the disk alias from
the vm definition. This necessitates moving a few helper functions to
qemu_driver.c and exposing the agent data structure (qemuAgentFSInfo) in
the header.
In addition, because the agent function no longer returns the looked-up
disk alias, we can't test the alias within qemuagenttest. Instead we
simply test that we parse and return the raw agent data correctly.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemuAgentDiskInfo structure is filled with information received from
the agent command response, except for the 'alias' field, which is
retrieved from the vm definition. Limit this structure only to data that
was received from the agent message.
This is another intermediate step in moving the responsibility for
searching the vmdef from qemu_agent.c to qemu_driver.c so that we can
avoid holding an agent job and a normal job at the same time.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In an effort to avoid holding both an agent and normal job at the same
time, we shouldn't access the vm definition from within qemu_agent.c
(i.e. while the agent job is being held). In preparation, we need to
store the full filesystem disk information in qemuAgentDiskInfo. In a
following commit, we can pass this information back to the caller and
the caller can search the vm definition to match the filsystem disk to
an alias.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function name doesn't give a good idea of what the function does.
Rename to qemuAgentGetFSInfoFillDisks() to make it more obvious than it
is filling in the disk information in the fsinfo struct.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Only Cascadelake-AP CPUs appear to report "die_id" values != 0 on Linux
right now - AMD EPYC's don't report "die_id" (at least with Fedora 31
kernel). Lacking access to Cascadelake-AP CPUs, this test data was from
a Fedora 31 QEMU guest launched with
-cpu qemu64 -smp sockets=2,dies=3,cores=2,threads=1
Ideally we'd replace this data with some from a real machine reporting
"die_id", to ensure we're not mislead by QEMU's impl.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Update the host CPU code to report the die_id in the NUMA topology
capabilities. On systems with multiple dies, this fixes the bug
where CPU cores can't be distinguished:
<cpus num='12'>
<cpu id='0' socket_id='0' core_id='0' siblings='0'/>
<cpu id='1' socket_id='0' core_id='1' siblings='1'/>
<cpu id='2' socket_id='0' core_id='0' siblings='2'/>
<cpu id='3' socket_id='0' core_id='1' siblings='3'/>
</cpus>
Notice how core_id is repeated within the scope of the same socket_id.
It now reports
<cpus num='12'>
<cpu id='0' socket_id='0' die_id='0' core_id='0' siblings='0'/>
<cpu id='1' socket_id='0' die_id='0' core_id='1' siblings='1'/>
<cpu id='2' socket_id='0' die_id='1' core_id='0' siblings='2'/>
<cpu id='3' socket_id='0' die_id='1' core_id='1' siblings='3'/>
</cpus>
So core_id is now unique within a (socket_id, die_id) pair.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Recently CPU hardware vendors have started to support a new structure
inside the CPU package topology known as a "die". Thus the hierarchy
is now:
sockets > dies > cores > threads
This adds support for "dies" in the XML parser, with the value
defaulting to 1 if not specified for backwards compatibility.
For example a system with 64 logical CPUs might report
<topology sockets="4" dies="2" cores="4" threads="2"/>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When pause-before-switchover QEMU capability is enabled, we get STOP
event before MIGRATION event with postcopy-active state. To properly
handle post-copy migration and emit correct events commit
v4.10.0-rc1-4-geca9d21e6c added a hack to
qemuProcessHandleMigrationStatus which translates the paused state
reason to VIR_DOMAIN_PAUSED_POSTCOPY and emits
VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY event when migration state changes
to post-copy.
However, the code was effective on both sides of migration resulting in
a confusing VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY event on the destination
host, where entering post-copy mode is already properly advertised by
VIR_DOMAIN_EVENT_RESUMED_POSTCOPY event.
https://bugzilla.redhat.com/show_bug.cgi?id=1791458
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is only a theoretical leak, but in virChrdevAlloc() we
initialize a mutex and if creating a hash table fails,
then virChrdevFree() is called which because of incorrect check
doesn't deinit the mutex.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When opening a console to a domain, we put a tuple of {path,
virStreamPtr} into a hash table that's private to the domain.
This is to ensure only one client at most has the console stream
open. Later, when the console is closed, the tuple is removed
from the hash table and freed. Except, @path won't be freed.
==234102== 60 bytes in 5 blocks are definitely lost in loss record 436 of 651
==234102== at 0x4836753: malloc (vg_replace_malloc.c:307)
==234102== by 0x5549110: g_malloc (in /usr/lib64/libglib-2.0.so.0.6000.6)
==234102== by 0x5562D1E: g_strdup (in /usr/lib64/libglib-2.0.so.0.6000.6)
==234102== by 0x4A5A917: virChrdevOpen (virchrdev.c:412)
==234102== by 0x17B64645: qemuDomainOpenConsole (qemu_driver.c:17309)
==234102== by 0x4BC8031: virDomainOpenConsole (libvirt-domain.c:9662)
==234102== by 0x13F854: remoteDispatchDomainOpenConsole (remote_daemon_dispatch_stubs.h:9211)
==234102== by 0x13F72F: remoteDispatchDomainOpenConsoleHelper (remote_daemon_dispatch_stubs.h:9178)
==234102== by 0x4AB0685: virNetServerProgramDispatchCall (virnetserverprogram.c:430)
==234102== by 0x4AB01F0: virNetServerProgramDispatch (virnetserverprogram.c:302)
==234102== by 0x4AB700B: virNetServerProcessMsg (virnetserver.c:136)
==234102== by 0x4AB70CB: virNetServerHandleJob (virnetserver.c:153)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we removed the subject prefix tag from the mailman config
we should set 'libvirt' as the subject when sending patches.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When resuming a domain from a save file, we read the domain XML
from the file, add it onto our internal list of domains, start
the qemu process, let it load the incoming migration stream and
resume its vCPUs afterwards. If anything goes wrong, the domain
object is removed from the list of domains and error is returned
to the caller. However, the qemu process might be left behind -
if resuming vCPUs fails (e.g. because qemu is unable to acquire
write lock on a disk) then due to a bug the qemu process is not
killed but the domain object is removed from the list.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1718707
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Our virsh already has 'domhostname' command. Add '--source'
argument to it so that users can chose between 'lease' and
'agent' sources. Also, implement completer for the argument.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since there is no guest agent in LXC world (yet), we can
implement _LEASE flag only.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There is a lots of possibilities to retrieve hostname information
from domain. Libvirt could use lease information from dnsmasq to
get current hostname too. QEMU supports QEMU-agent but it can use
lease source.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In particular, we're interested in the following commits:
commit 43b5194d5b156f8dd7ae576952568d331978f5f0
Author: Bruno Haible <bruno@clisp.org>
Date: Sun Jan 5 20:42:12 2020 +0100
tests: Avoid GCC over-optimization caused by _GL_ARG_NONNULL attributes.
* lib/stdlib.in.h: Tweak last commit.
commit b7d7afe10ddf599452bd80b8a840c830cd474b09
Author: Bruno Haible <bruno@clisp.org>
Date: Sun Jan 5 09:13:25 2020 +0100
tests: Avoid GCC over-optimization caused by _GL_ARG_NONNULL attributes.
Reported by Jim Meyering in
<https://lists.gnu.org/archive/html/bug-gnulib/2020-01/msg00040.html>.
* lib/stdlib.in.h (GNULIB_defined_canonicalize_file_name): New macro.
(GNULIB_defined_ptsname_r): New macro.
* tests/test-canonicalize.c (_GL_ARG_NONNULL): Define to empty.
(main): Disable the NULL argument test if canonicalize_file_name does
not come from gnulib.
* tests/test-canonicalize-lgpl.c (_GL_ARG_NONNULL): Define to empty.
(main): Disable the NULL argument test if canonicalize_file_name does
not come from gnulib.
* tests/test-ptsname_r.c (_GL_ARG_NONNULL): Define to empty.
(test_errors): Disable the NULL argument test if ptsname_r does not come
from gnulib.
since they fix a build failure caused by the gnulib tests failing
on ppc64le, as reported in
https://www.redhat.com/archives/libvir-list/2020-January/msg00616.html
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Tracked-down-by: Bruno Haible <bruno@clisp.org>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
As of systemd commit:
commit d65652f1f21a4b0c59711320f34266c635393c89
Author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
CommitDate: 2018-12-10 09:56:56 +0100
Partially unify hostname_is_valid() and dns_name_is_valid()
Dashes are no longer allowed at the end of machine names.
Trim the trailing dashes from the generated name before passing
it to machined.
https://bugzilla.redhat.com/show_bug.cgi?id=1790409
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
A new helper for trimming combinations of specified characters from
the tail of the buffer.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Allow adding new fields without changing all the macros.
Otherwise the compiler complains that not all have been initialized:
../../tests/virbuftest.c:419:5: error: missing field 'arg' initializer [-Werror,-Wmissing-field-initializers]
DO_TEST_ESCAPE("<td></td><td></td>",
^
../../tests/virbuftest.c:414:56: note: expanded from macro 'DO_TEST_ESCAPE'
struct testBufAddStrData info = { data, expect }; \
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Move the declaration to the beginning of the file for reuse.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Remove the ret variables and labels from functions that no longer need
them.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This leaks the FD of BPF map which means it will not be freed.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Some were in the wrong section, some in the wrong version.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
libvirt currently always reports that USB is available as a bus subsystem
type when running "virsh domcapabilities". However, this is not always
true, for example the qemu-system-s390x binary normally never has support
for USB. Thus we should only report that USB is available if there is
also a USB host controller available where we can attach USB devices.
Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1759849
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When trying to specify an input device on s390x without bus like this:
<input type='keyboard'/>
... then libvirt currently complains:
error: unsupported configuration: USB is disabled for this domain,
but USB devices are present in the domain XML
This is somewhat confusing since the user did not specify an USB
device here. Since USB is not available on s390x, we should default
to the "virtio" bus here instead.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1790189
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically there are two places where we format authentication and
encryption for a disk. The logich which formats it for backing files was
flawed though and didn't format it at all. This worked if the image
became a backing file through the means of a snapshot but not directly.
Force formatting of the source and encryption for any non-disk case to
fix the issue.
This caused problems in many places as we use the formatter to copy the
definition. Effectively any copy lost the secret definition.
https://bugzilla.redhat.com/show_bug.cgi?id=1789310https://bugzilla.redhat.com/show_bug.cgi?id=1788898
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The test data was used only in xml->argv testing but it will have some
interresting fallout soon.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add another disk to luks-disks-source-qcow2 case to cover a backing
chain with encrypted members.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Commit v5.10.0-269-g62065a6cb5 moved NUMA validation code to domain
definition time and appropriately adjusted affected test cases except
for hugepages-default-system-size. And since we don't mock
virGetSystemPageSizeKB in our tests, hugepages-default-system-size test
would fail on architectures (ppc64le) with default page size other than
4KiB.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In v5.0.0-rc1~94 we switched from one huge switch() to an array
for translating error numbers into error messages. However, the
array is declared to have VIR_ERR_NUMBER_LAST items which makes
it impossible to spot this place by compile checking when adding
new error number.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Mention the knowledge base article which has tips how to fix the backing
chain to work with current libvirt.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When debugging tests under GDB/valgrind there is a significant
delay each time an execve is done as they scan shared libraries
once again. For tests which use many mock libraries, we have
been invoking execve many times which makes the debug experience
horrible. This changes our framework to activate the full
set of mock libraries in one single execve.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add documentation for additional reason why snapshot-revert might need
to be forced. This explains why restoring an inactive snapshot while
there is managed saved state is refused by default.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reformat explanations of the snapshot-revert force reasons in
preparation for more to be added. This is a simple reformat without any
wording changes.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Internal snapshots of a non-running domain do not carry any memory state
and restoring such a snapshot will not replace existing saved memory
state. This allows a scenario, where a user first suspends a domain into
managedsave, restores a non-running snapshot and then resumes the domain
from managedsave. After that, the guest system will run with its
previous memory state atop a different disk state. The most obvious
possible fallout from this is extensive file system corruption. Swap
content and RAID bitmaps might also be off.
This has been discussed[1] and fixed[2] from the end-user perspective for
virt-manager.
This patch marks the restore operation as risky at the libvirt level,
requiring the user to remove the saved memory state first or force the
operation.
[1] https://www.redhat.com/archives/virt-tools-list/2019-November/msg00011.html
[2] https://www.redhat.com/archives/virt-tools-list/2019-December/msg00049.html
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Trivially replace usages of qemu and lxc in the virsh manpage with their
more heavily used and (according to Wikipedia) correct upper-case
spellings QEMU and LXC.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Suggested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit v5.10.0-290-g3a4787a301 refactored qemuDomainGetHostdevPath to
return a single path rather than an array of paths. When the function is
called on a missing device, it will now return NULL in @path rather than
a NULL array with zero items and the callers need to be adapted
properly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
--tls-destination would be just ignored unless --tls is not specified,
which is correct, but let's provide a bit of a guidance is a user
forgets to add --tls.
This is just a virsh-only check targeted to end users as we don't
currently have such checks at the API level for migration parameters
that depend on flags.
https://bugzilla.redhat.com/show_bug.cgi?id=1784345
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
bhyveargv2xmlmock calls virBhyveCapsBuild which in turn
calls virCPUProbeHost, probing the real host CPU. This
causes a test failure if the host CPU happens to contain
the 'arch-capabilities' feature as it triggers a call
to virHostCPUGetMSR() which fails on FreeBSD.
Fortunately we already have convenient code for mocking
the host CPU probing.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is no need to require users to produce iSCSI disk source
following our ordering of children elements. In fact, we don't
even accept our own order in the schema :(.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
In v5.10.0-508-gfbf3f3d86a, the 'error' label was removed from
bhyveParseBhyveCommandLine(), however the CONSUME_ARG() macro
still uses it. Fix the macro to return an error instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
src/qemu/qemu_domain_address.c:680:13: error: this statement may fall through [-Werror=implicit-fallthrough=]
switch ((virDomainFSModel) dev->data.fs->model) {
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: f363af7e35
Commit v5.10.0-522-g9000b2f298 was too aggressive and removed the
'error' label from prlsdkRemoveBootDevices() even though it's
used. Luckily, it's used only from one place and we have an
alternative for it that doesn't require the label.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The point of this function is to translate virDomainOsDefFirmware
enum to qemuFirmwareOSInterface enum. However, with my commit
v5.10.0-507-g8e1804f9f6 we are passing a variable type of
virDomainLoader enum. Make the function accept both enums and
make the enum members correspond to each other.
This fixes clang build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split the formatting by fsdriver type to allow adding a new type.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Split the switch by fsdriver type to allow adding a new one.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Wire up the allocation and disposal of private data.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add an object to hold the private data and call the
allocation function if it's present in xmlopt.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will be needed in the future for allocating private data.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Remove the 'gluster' part and decouple the return from
the gluster_debug_level parsing to allow adding more options
to this section.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Inactive VM doesn't have qemuCaps set thus we'd never properly report
that VM backups are supported only for running VMs.
Move the capability check after the active check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The variable value is split on multiple lines, which have too
long indentation prefix leading to needless long lines.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is not strictly needed, but it makes sure we initialize the
@bootTime global variable. Thing is, in order to validate XATTRs
and prune those set in some previous runs of the host, a
timestamp is recorded in XATTRs. The host boot time was unique
enough so it was chosen as the timestamp value. And to avoid
querying and parsing /proc/uptime every time, the query function
does that only once and stores the boot time in a global
variable. However, the only time the query function is called is
in a child process that does lock files and changes seclabels. So
effectively, we are doing exactly what we wanted to prevent from
happening.
The fix is simple, call the virHostBootTimeInit() function which
sets the global variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The idea is to offer callers an init function that they can call
independently to ensure that the global variables get
initialized.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
After one of previous commits (v5.10.0-524-gce56408e5f) there is
a variable left unused in verify_xpath_context() which breaks the
build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
gather_scsi_host_cap() in node_device_hal.c can be greatly
simplified, given that the 'out' label is always getting
hit regardless of 'retval', which can also be eliminated.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Labels that are simply a jump to a 'return' call are
unneeded and can be replaced by the return value instead.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
While we discourage people to use the old style of specifying
UEFI for their domains (the old style is putting path to the FW
image under /domain/os/loader/ whilst the new one is using
/domain/os/@firmware), some applications might have not adapted
yet. They still rely on libvirt autofilling NVRAM path and
figuring out NVRAM template when using the old way (notably
virt-install does this). We must preserve backcompat for this
previously supported config approach. However, since we really
want distro maintainers to leave --with-loader-nvram configure
option and rely on JSON descriptors, we need to implement
autofilling of NVRAM template for the old way too.
Fedora: https://bugzilla.redhat.com/show_bug.cgi?id=1782778
RHEL: https://bugzilla.redhat.com/show_bug.cgi?id=1776949
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These functions are meant to replace verbose check for the old
style of specifying UEFI with a simple function call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This simplifies condition when matching FW interface by having a
single line condition instead of multiline one. Also, it prepares
the code for future expansion.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This function needs domain definition really, we don't need to
pass the whole domain object. This saves couple of dereferences
and characters esp. in more checks to come.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The 'domifaddr' command accepts several arguments. Let's validate
them first and look up domain to work with only after to save
some RPC cycles should validation fail.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduced in v5.10.0-449-gcf44ec5577 it used
virshCommaStringListComplete() to generate list of options. But
this is not correct because the '--source' argument of the
'domifaddr' doesn't accept a string list (for instance
"arp,agent,lease") rather than a single string. Therefore, the
completer must return these strings separately and thus must
refrain from using virshCommaStringListComplete().
At the same time, now that we have strings we need declared as
an enum we can use TypeToString() instead of copying strings.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are more occurrences, but I'm converting --source argument
of domifaddr command only, because I will need it in next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When building RPMs for libvirt the PO files are part of libvirt-libs
package. Now that we generate libvirt.pot during build time the POT
creation date is also generated at that time.
The issue here is that when building libvirt-libs for x86_64 and i686
the generated libvirt.pot file will have different POT creation date
which affects installed PO files as well which leads to conflict when
installing both x86_64 and i686 packages.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Debian 9 ships the oldest versions of some of our dependent
packages so can highlight bugs not seen elsewhere. CentOS 7,
despite being quite old, has rebased some packages to much
newer versions.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
GLib header files annotate every API with a version number.
It is possible to define some constants before including
glib.h which will result in useful compile time warnings.
Setting GLIB_VERSION_MIN_REQUIRED will result in a warning
if libvirt uses an API that was deprecated in the declared
version, or before. Such API usage should be rewritten to
use the documented new replacement API.
Setting GLIB_VERSION_MAX_ALLOWED will result in a warning
if libvirt uses an API that was not introduced until a
version of GLib that's newer than our minimum declared
version. This avoids accidentally using functionality
that is not available on some supported platforms.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The g_date_time_new_from_iso8601() function was introduced as
a replacement for strptime in
commit 810613a60e
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Mon Dec 23 15:37:26 2019 +0000
src: replace strptime()/timegm()/mktime() with GDateTime APIs set
Unfortunately g_date_time_new_from_iso8601 isn't available until
glib 2.56, and backporting it requires alot of code copying and
poking at private glib structs.
This reverts domain_conf.c back to its original parsing logic prior
to 810613a60e, but using g_date_time_new()
instead of gmtime(). The other files are then adapted to follow a
similar approach.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_canonicalize_filename was not introduced until glib 2.58
so we need a temporary backport of its impl.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_fsync was introduced in 2.63 which is newer than our minimum
glib version. A future commit will introduce compile time
checking of API versions to prevent accidental usage of APIs
from glib newer than our min declared.
To avoid triggering this warning, however, we need to ensure
that we always use our wrapper function via glibcompat.c,
which will disable the API version warnings.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, when security driver is not available users are informed that
it wasn't found which can be confusing.
1. Update error message
2. Add comment to domain doc
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by Sebastian Mitterle <smitterl@redhat.com>
/dev/tap* is an invalid path but it works with lax policy.
Make it work with more accurate policy as well
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dominick Grift <dac.override@gmail.com>
We insert the checkpoint metadata into the list of checkpoints prior to
actually creating the on-disk bits. If the 'transaction' or any other
steps done between inserting the checkpoint and creating the on-disk
data fail we'd end up with an unusable checkpoint that would vanish
after libvirtd restart.
Prevent this by rolling back the metadata if we didn't actually take and
record the checkpoint.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If we are certain that the checkpoint creation failed we remove the
metadata from the list. To allow reusing this in the backup code add a
new helper and export it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Document that --diskspec DISK,snapshot=no disables snapshot for the
given disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When allowing/denying a device in devices CGroupV2 we have to
write a BPF program for it. The program we put there is merely
static and all it does it looks up a device in a hash table (also
known as map in BPF terminology). A map is referenced via an FD
which can be acquired via virBPFCreateMap() and like any other FD
it should be closed when no longer needed. However, we close it
twice: the first time in virCgroupV2DevicesAttachProg() which
closes it unconditionally, and the second time in either
virCgroupV2DevicesCreateProg() or
virCgroupV2DevicesPrepareProg(). Remove the second close.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This function is not called outside of the source file where it's
defined. There's no need to export it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Any static list of images is destined to become outdated eventually,
so let's start generating it dynamically instead.
Unfortunately there doesn't seem to be a straightforward way to get
Podman/Docker to list all repositories under quay.io/libvirt, so we
have to resort to searching and filtering manually; and since the
two tools behave slightly differently in that regard, it's more
sane to have the logic in a separate shell script than it would be
to keep it inline in the Makefile with all the annoying escaping
doing so would entail.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The underlying resctrl monitoring is actually using 64 bit counters,
not the 32bit one. Correct this by using 64bit data type for reading
hardware value.
To keep the interface consistent, the result of CPU last level cache
that occupied by vcpu processors of specific restrl monitor group is
still reported with a truncated 32bit data type. because, in silicon
world, CPU cache size will never exceed 4GB.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
One of the first versions thought of using disk path as the second
option but this was dropped as being a legacy interface. Remove the
leftover pointless <choice> wrapper for the disk name as there's just
one option now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit d75f865fb9 caused a job-deadlock if
a VM is running the backup job and being destroyed as it removed the
cleanup of the async job type and there was nothing to clean up the
backup job.
Add an explicit cleanup of the backup job when destroying a VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When cancelling the blockjobs as part of failed backup job startup
recover we didn't pass in the correct async job type. Luckily the block
job handler and cancellation code paths use no block job at all
currently so those were correct.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we delete the images elsewhere it's not required. Additionally
it's safe to do as we never released an upstream version which required
this being in place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While qemu is running both locations are identical in semantics, but the
move will allow us to fix the scenario when the VM is destroyed or
crashes where we'd leak the images.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In contrast to snapshots the backup job does not complain when the
backup job's store file has backing pre-configured. It's actually
required so that the NBD server exposes all the data properly.
Remove our fake termination and use the existing disk source as backing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
qemuDomainObjPrivateDataClear clears state which become invalid after VM
stopped running and the node name allocator belongs there.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The waiting loop used QEMU_ASYNC_JOB_NONE rather than 'asyncJob' passed
from the caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a comment against each gnulib module suggesting strategy
for replacement.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
* canonicalize-lgpl: replaced by realpath()/g_canonicalize_filename()
* clock-gettime: replaced by g_get_(real|monotonic)_time
* dirname-lgpl: replaced by g_path_get_dirname()
* fclose: we aren't affected by any portability problems it fixes
* fdatasync: every platform we call fdatasync on has it present
* fsync: replaced by g_fsync()
* fnmatch: replaced by g_pattern_match()
* getcwd-lgpl: replaced by g_get_current_dir()
* gethostname: replaced by g_get_hostname()
* gettimeofday: replaced by g_get_(real|monotonic)_time
* setenv: replaced by g_setenv()
* strptime: replaced by GDateTime
* timegm: replaced by GDateTime
* unsetenv: replaced by g_unsetenv()
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All places where we use strptime/timegm()/mktime() are handling
conversion of dates in a format compatible with ISO 8601, so we
can use the GDateTime APIs to simplify code.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_networking_init() does the same as our custom code.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Note the glib function returns a const string because it
caches the hostname using a one time thread initializer
function.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The canonicalize_file_name(path) is equivalent to calling
realpath(path, NULL). Passing NULL for the second arg of
realpath is not standardized behaviour, however, Linux,
FreeBSD > 6.4 and macOS > 10.5 all support this critical
extension.
This leaves Windows which doesn't provide realpath at all.
The g_canonicalize_filename() function doesn't expand
symlinks, so is not strictly equivalent to realpath()
but is close enough for our Windows portability needs
right now.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
commandhelper.c is not converted since this is a standalone
program only run on UNIX, so can rely on getcwd().
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A few places were importing dirname.h without actually using it.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The last_component() method is a GNULIB custom function
that returns a pointer to the base name in the path.
This is similar to g_path_get_basename() but without the
malloc. The extra malloc is no trouble for libvirt's
needs so we can use g_path_get_basename().
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_get_real_time() returns the time since epoch in microseconds.
It uses gettimeofday() internally while libvirt used clock_gettime
because it is declared async signal safe. In practice gettimeofday
is also async signal safe *provided* the timezone parameter is
NULL. This is indeed the case in g_get_real_time().
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The g_pattern_match function_simple is an acceptably close
approximation of fnmatch for libvirt's needs.
In contrast to fnmatch(), the '/' character can be matched
by the wildcards, there are no '[...]' character ranges and
'*' and '?' can not be escaped to include them literally in
a pattern.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The GLib g_lstat() function provides a portable impl for
Win32.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A wrapper that calls g_fsync on Win32/macOS and fdatasync
elsewhere. g_fsync is a stronger flush than we need but it
satisfies the caller's requirements & matches the approach
gnulib takes.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The g_fsync() API provides the same Windows portability
as GNULIB does for fsync().
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_fsync isn't available until 2.63 so we need a compat
wrapper temporarily.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Eliminate direct use of normal setenv/unsetenv calls in
favour of GLib's wrapper. This eliminates two gnulib
modules
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The gstdio.h header defines some low level wrappers for
things like fsync, stat, lstat, etc.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When using GNULIB with Winsock, libvirt will never see the normal HANDLE
objects, instead GNULIB guarantees that libvirt gets a C runtime file
descriptor. The GNULIB poll impl also expects to get C runtime file
descriptors rather than HANDLE objects. Document this behaviour so that
it is clear to applications providing event loop implementations if they
need Windows portability.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ideally we would test macOS 10.15 as the newest release, however, that
is not available in Travis yet. We can at least test newer XCode
versions though to get toolchain validation.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We initially claimed to only support the most recent macOS
release, which is currently 10.15. Our Travis CI, however,
is validating 10.14.4 / XCode 10.3.
For almost all of our other platforms, we support multiple
releases to some degree. This change brings macOS in line
with other long life distros, covering the most recent &
most recent but one for a 2 year overlap. With this docs
change our CI is now actually testing our minimum version.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We have a strong check for GCC >= 4.8, but don't validate any
version number for CLang historically.
This defines the min CLang to be 3.4 which is what is available
for RHEL-7. macOS uses a different versioning scheme for CLang,
based off XCode versions. There is a mapping recorded at
https://en.wikipedia.org/wiki/Xcode#Toolchain_versions
Here we see upstream CLang 3.4 corresponds to XCode 5.1
XCode 5.1 is available for macOS 10.8.4 or later which
trivially satisfies our platform support matrix requirements.
All these versions match what QEMU declares for its min GCC
and CLang checks.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The command `domifaddr` can use three different sources to grab IP
address of a Virtual Machine: lease, agent and arp. This parameter does
not have a completer function to return source options.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The Python3 package has started failing to install from
HomeBrew with the following:
Error: The `brew link` step did not complete successfully
The formula built, but is not symlinked into /usr/local
Could not symlink Frameworks/Python.framework/Headers
Target /usr/local/Frameworks/Python.framework/Headers
is a symlink belonging to python@2. You can unlink it:
brew unlink python@2
To force the link and overwrite all conflicting files:
brew link --overwrite python
The result is that libvirt fails to find python3:
checking for python3... no
configure: error: 'python3' binary is required to build libvirt
It is unclear what changed in Travis/HomeBrew to break our
previously working setup, but running the suggested command
fixes it well enough for libvirt's CI needs.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
While command line arguments are sort of positional (because you
have to have two entries, one for "-arg" the other for "value"),
it doesn't really matter whether env variables come before or
after command line arguments.
And it matters even less when playing with qemu capabilities.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If we use fake reboot then domain goes thru running->shutdown->running
state changes with shutdown state only for short period of time. At
least this is implementation details leaking into API. And also there is
one real case when this is not convinient. I'm doing a backup with the
help of temporary block snapshot (with the help of qemu's API which is
used in the newly created libvirt's backup API). If guest is shutdowned
I want to continue to backup so I don't kill the process and domain is
in shutdown state. Later when backup is finished I want to destroy qemu
process. So I check if it is in shutdowned state and destroy it if it
is. Now if instead of shutdown domain got fake reboot then I can destroy
process in the middle of fake reboot process.
After shutdown event we also get stop event and now as domain state is
running it will be transitioned to paused state and back to running
later. Though this is not critical for the described case I guess it is
better not to leak these details to user too. So let's leave domain in
running state on stop event if fake reboot is in process.
Reconnection code handles this patch without modification. It detects
that qemu is not running due to shutdown and then calls qemuProcessShutdownOrReboot
which reboots as fake reboot flag is set.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Use errno parameter in virReportSystemError.
Remove hold function return values if don't need.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Yi Li <yili@winhong.com>
Fix the return value status comparison checking for call to
volStorageBackendRBDRefreshVolInfo introduced by commit id f46d137e.
we only should fail when the return is < 0. -ENOENT, -ETIMEDOUT will
ignore according commit id f46d137e.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Yi Li <yili@winhong.com>
most libvirt code uses 'int rc' to hold intermediate
function return values. consistent with the rest of libvirt.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Yi Li <yili@winhong.com>
We don't need this for any functional purpose, but when debugging hosts
it is useful to know what binary a given capabilities XML document is
associated with.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Simplify repeated code patterns by providing a new constructor taking
the QEMU binary name.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently if the binary path is NULL in the qemu capabilities object,
cache invalidation is skipped. A future patch will ensure that the
binary path is always non-NULL, so a way to explicitly skip invalidation
is required.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Causing a crash when storagePoolLookupByTargetPath beacuse of
Some types of storage pool have no target elements.
Use STREQ_NULLABLE instead of STREQ
Avoids segfaults when using NULL arguments.
Core was generated by `/usr/sbin/libvirtd'.
Program terminated with signal 11, Segmentation fault.
(gdb) bt
0 0x0000ffff9e951388 in strcmp () from /lib64/libc.so.6
1 0x0000ffff92103e9c in storagePoolLookupByTargetPathCallback (
obj=0xffff7009aab0, opaque=0xffff801058b0) at storage/storage_driver.c:1649
2 0x0000ffff9f2c52a4 in virStoragePoolObjListSearchCb (
payload=0xffff801058b0, name=<optimized out>, opaque=<optimized out>)
at conf/virstorageobj.c:476
3 0x0000ffff9f1f2f7c in virHashSearch (ctable=0xffff800f4f60,
iter=iter@entry=0xffff9f2c5278 <virStoragePoolObjListSearchCb>,
data=data@entry=0xffff95af7488, name=name@entry=0x0) at util/virhash.c:696
4 0x0000ffff9f2c64f0 in virStoragePoolObjListSearch (pools=0xffff800f2ce0,
searcher=searcher@entry=0xffff92103e68 <storagePoolLookupByTargetPathCallback>,
opaque=<optimized out>) at conf/virstorageobj.c:505
5 0x0000ffff92101f54 in storagePoolLookupByTargetPath (conn=0xffff5c0009f0,
path=0xffff7009a850 "/vms/images") at storage/storage_driver.c:1672
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Yi Li <yili@winhong.com>
The 'cleanup' flag is doing no cleaup in this function. We can
remove it and return NULL on error or qemuBuildCommandLine().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The g_auto*() changes made by the previous patches made a lot
of 'cleanup' labels obsolete. Let's remove them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change all feasible pointers to use g_autoptr().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This will allow us to g_autoptr qemuDomainLogContext pointers
in the following patch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change all feasible strings and scalar pointers to use g_autofree.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
As pointed out by Ján Tomko, "no_memory seems suspicious in the times of
abort()".
As libvirt decided to take the path to not report OOM and simply abort
when it happens, let's get rid of the no_memory labels and simplify the
code around them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
As pointed out by Ján Tomko, "no_memory seems suspicious in the times of
abort()".
As libvirt decided to take the path to not report OOM and simply abort
when it happens, let's get rid of the no_memory labels and simplify the
code around them.
Mind that virfirewall.c was not touched and still contains no_memory
labels. The reason those are left behind, at least for now, is because
the conversion seems to be slightly more complicated than the rest, as
some other places are relying on firewall->err being set to ENOMEM.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
As pointed out by Ján Tomko, "no_memory seems suspicious in the times of
abort()".
As libvirt decided to take the path to not report OOM and simply abort
when it happens, let's get rid of the no_memory labels and simplify the
code around them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
As pointed out by Ján Tomko, "no_memory seems suspicious in the times of
abort()".
As libvirt decided to take the path to not report OOM and simply abort
when it happens, let's get rid of the no_memory labels and simplify the
code around them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
As pointed out by Ján Tomko, "no_memory seems suspicious in the times of
abort()".
As libvirt decided to take the path to not report OOM and simply abort
when it happens, let's get rid of the no_memory labels and simplify the
code around them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the genaclperms.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the hvsupport.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
The new impl generates byte-for-byte identical output to the
old impl.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the check-file-access.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the group-qemu-caps.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This way they are correctly represented:
<source>
<format type='vmfs'/>
</source>
... instead of 'auto'.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
It will be used to represent the type of a filesystem pool in ESXi.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Move the creation of a virNetworkPtr object from the
esxVI_HostVirtualSwitch object of a virtual switch out of
esxNetworkLookupByName in an own helper. This way it can be used also
in other functions.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Move the creation of a virStoragePtr object from the
esxVI_HostInternetScsiHbaStaticTarget object of a target out of
esxStoragePoolLookupByName in an own helper. This way it can be used
also in other functions.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the detection of the type of a vmfs pool out of
esxLookupVMFSStoragePoolType in an own helper. This way it can be used
also in other functions.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the creation of a virStoragePtr object from the esxVI_ObjectContent
object of a datastore out of esxStoragePoolLookupByName in an own
helper. This way it can be used also in other functions.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserRuntimeDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserRuntimeDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserRuntimeDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Together with the change, let's also simplify the function and get rid
of the goto.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Together with the change, let's also simplify the function and get rid
of the goto.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserRuntimeDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Together with the change, let's also simplify the function and get rid
of the goto.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Together with the change, let's also simplify the function and get rid
of the goto.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserRuntimeDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserRuntimeDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserRuntimeDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserRuntimeDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserRuntimeDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserRuntimeDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserRuntimeDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserRuntimeDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserConfigDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserConfigDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserConfigDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserConfigDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserConfigDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserConfigDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserCacheDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserCacheDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserCacheDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This also fixes a cacheDir's leak when g_mkstep_full() fails.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserCacheDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserConfigDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserConfigDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserConfigDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserDirectory() *never* *ever* returns NULL, making the checks for
it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserDirectory() *never* *ever* returns NULL, making the checks for
it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On vboxStorageVolCreateXML(), virGetUserDirectory() was called without
freeing its content later on.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make it clearer that what we're trying to do is find @source and
@target_node so that the unattentive or code analysis utility
doesn't believe 'source' and 'target' could be found in the same
node element.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the error path, if we xmlFreeNode @ret, then the return ret;
a few lines later returns something that's already been free'd
and could be reused, so let's reinit it.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Recent changes removed the virCapsPtr, but didn't adjust/remove the
corresponding ATTRIBUTE_NONNULL resulting in a build failure to build
in my Coverity environment.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
None of those are used and we should prefer using the ones provided by
GLib, as G_DIR_SEPARATOR, G_DIR_SEPARATOR_S, G_SEARCHPATH_SEPARATOR, and
G_SEARCHPATH_SEPARATOR_S.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Let's just use the plain g_get_home_dir(), from GLib, instead of
maintaining a code adapted from the GLib's one.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Previous patch made it possible for the QEMU driver to check if
a given PCI hostdev is unassigned, by checking if dev->info->type is
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_UNASSIGNED, meaning that this device
shouldn't be part of the actual guest launch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch introduces a new PCI hostdev address type called
'unassigned'. This new type gives users the option to add
PCI hostdevs to the domain XML in an 'unassigned' state, meaning
that the device exists in the domain, is managed by Libvirt
like any regular PCI hostdev, but the guest does not have
access to it.
This adds extra options for managing PCI device binding
inside Libvirt, for example, making all the managed PCI hostdevs
declared in the domain XML to be detached from the host and bind
to the chosen driver and, at the same time, allowing just a
subset of these devices to be usable by the guest.
Next patch will use this new address type in the QEMU driver to
avoid adding unassigned devices to the QEMU launch command line.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the validation of vmcoreinfo from qemuBuildVMCoreInfoCommandLine()
to qemuDomainDefValidateFeatures(), allowing for validation
at domain define time.
qemuxml2xmltest.c was changed to account for this caps being
now validated at this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move smartcard validation being done by qemuBuildSmartcardCommandLine()
to the existing qemuDomainSmartcardDefValidate() function. This
function is called by qemuDomainDeviceDefValidate(), allowing smartcard
validation in domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move EGL Headless validation from qemuBuildGraphicsEGLHeadlessCommandLine()
to qemuDomainDeviceDefValidateGraphics(). This function is called by
qemuDomainDefValidate(), validating the graphics parameters in domain
define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the NVDIMM validation from qemuBuildMachineCommandLine()
to a new function in qemu_domain.c, qemuDomainDeviceDefValidateMemory(),
which is called by qemuDomainDeviceDefValidate(). This allows
NVDIMM validation to occur in domain define time.
It also increments memory hotplug validation, which can be seen
by the failures in the hotplug tests in qemuxml2xmltest.c that
needed to be adjusted after the move.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If the host OS doesn't have NUMA present, we fallback to
populating fake NUMA info and the code thus assumes only a
single NUMA node.
Unfortunately we also fallback to fake NUMA if numactl-devel
was not present, and in this case we can still have multiple
NUMA nodes. In this case we create all CPUs, but only the
CPUs in the first node have any data filled in, resulting in
capabilities like:
<topology>
<cells num='1'>
<cell id='0'>
<memory unit='KiB'>15977572</memory>
<cpus num='48'>
<cpu id='0' socket_id='0' core_id='0' siblings='0'/>
<cpu id='1' socket_id='0' core_id='0' siblings='1'/>
<cpu id='2' socket_id='0' core_id='1' siblings='2'/>
<cpu id='3' socket_id='0' core_id='1' siblings='3'/>
<cpu id='4' socket_id='0' core_id='2' siblings='4'/>
<cpu id='5' socket_id='0' core_id='2' siblings='5'/>
<cpu id='6' socket_id='0' core_id='3' siblings='6'/>
<cpu id='7' socket_id='0' core_id='3' siblings='7'/>
<cpu id='8' socket_id='0' core_id='4' siblings='8'/>
<cpu id='9' socket_id='0' core_id='4' siblings='9'/>
<cpu id='10' socket_id='0' core_id='5' siblings='10'/>
<cpu id='11' socket_id='0' core_id='5' siblings='11'/>
<cpu id='0'/>
<cpu id='0'/>
<cpu id='0'/>
<cpu id='0'/>
<cpu id='0'/>
<cpu id='0'/>
<cpu id='0'/>
<cpu id='0'/>
<cpu id='0'/>
<cpu id='0'/>
<cpu id='0'/>
</cpus>
</cell>
</cells>
</topology>
With this new code we get something slightly less broken
<topology>
<cells num='4'>
<cell id='0'>
<memory unit='KiB'>15977572</memory>
<cpus num='12'>
<cpu id='0' socket_id='0' core_id='0' siblings='0-1'/>
<cpu id='1' socket_id='0' core_id='0' siblings='0-1'/>
<cpu id='2' socket_id='0' core_id='1' siblings='2-3'/>
<cpu id='3' socket_id='0' core_id='1' siblings='2-3'/>
<cpu id='4' socket_id='0' core_id='2' siblings='4-5'/>
<cpu id='5' socket_id='0' core_id='2' siblings='4-5'/>
<cpu id='6' socket_id='0' core_id='3' siblings='6-7'/>
<cpu id='7' socket_id='0' core_id='3' siblings='6-7'/>
<cpu id='8' socket_id='0' core_id='4' siblings='8-9'/>
<cpu id='9' socket_id='0' core_id='4' siblings='8-9'/>
<cpu id='10' socket_id='0' core_id='5' siblings='10-11'/>
<cpu id='11' socket_id='0' core_id='5' siblings='10-11'/>
</cpus>
</cell>
<cell id='0'>
<memory unit='KiB'>15977572</memory>
<cpus num='12'>
<cpu id='12' socket_id='0' core_id='0' siblings='12-13'/>
<cpu id='13' socket_id='0' core_id='0' siblings='12-13'/>
<cpu id='14' socket_id='0' core_id='1' siblings='14-15'/>
<cpu id='15' socket_id='0' core_id='1' siblings='14-15'/>
<cpu id='16' socket_id='0' core_id='2' siblings='16-17'/>
<cpu id='17' socket_id='0' core_id='2' siblings='16-17'/>
<cpu id='18' socket_id='0' core_id='3' siblings='18-19'/>
<cpu id='19' socket_id='0' core_id='3' siblings='18-19'/>
<cpu id='20' socket_id='0' core_id='4' siblings='20-21'/>
<cpu id='21' socket_id='0' core_id='4' siblings='20-21'/>
<cpu id='22' socket_id='0' core_id='5' siblings='22-23'/>
<cpu id='23' socket_id='0' core_id='5' siblings='22-23'/>
</cpus>
</cell>
</cells>
</topology>
The topology at least now reflects what 'virsh nodeinfo' reports.
The main bug is that the CPU "id" values won't match what the Linux
host actually uses.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'caps' object is already allocated when the fake NUMA
initialization takes place.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current 'for' loop with 5 consecutive 'ifs' inside
qemuBuildHostdevCommandLine can be a bit smarter:
- all 5 'ifs' fails if hostdev->mode is not equal to
VIR_DOMAIN_HOSTDEV_MODE_SUBSYS. This check can be moved to the
start of the loop, failing to the next element immediately
in case it fails;
- all 5 'ifs' checks for a specific subsys->type to build the proper
command line argument (virHostdevIsSCSIDevice and virHostdevIsMdevDevice
do that but within a helper). Problem is that the code will keep
checking for matches even if one was already found, and there is
no way a hostdev will fit more than one 'if' (i.e. a hostdev can't
have 2+ different types). This means that a SUBSYS_TYPE_USB will
create its command line argument in the first 'if', then all other
conditionals will surely fail but will end up being checked anyway.
All of this can be avoided by moving the hostdev->mode comparing
to the start of the loop and using a switch statement with
subsys->type to execute the proper code for a given hostdev
type.
Suggested-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The code calling this method expects it to have reported an error on
failure.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When freeing qemu driver struct members, we forgot to free
@hostcpu and @hostnuma members.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function is supposed to clean up virQEMUDriver structure and
free individual members. However, it's doing that in random order
which makes it hard to track which members are being freed and
which are not. Do the free in reverse order than the structure
definition - assuming that the most important members (like
mutex) are declared first and freed last.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Fortunately, this is not causing any problems now because glib
does this check for us when calling this function via attribute
cleanup. But in a future commit we will explicitly call this
function over a struct member that might be NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In testXLInitDriver() a dummy driver structure is filled and it
is freed later in testXLFreeDriver(). However, it is sufficient
to unref just driver->config because that results in
libxlDriverConfigDispose() being called which unrefs
driver->config->caps. There is no need to unref it again in
testXLFreeDriver() - in fact it's undesired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When generating domain capabilities, we need to fake host CPU to
get reproducible result. We do this by copying a pre-existent CPU
config and setting VIR_TEST_MOCK_FAKE_HOST_CPU env variable which
is then consumed by qemucpumock. However, we forget to free the
CPU copy afterwards.
2,196 (2,016 direct, 180 indirect) bytes in 18 blocks are definitely lost in loss record 291 of 297
at 0x4838B86: calloc (vg_replace_malloc.c:762)
by 0x57CB6A0: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6000.7)
by 0x4A0F72D: virCPUDefNew (cpu_conf.c:87)
by 0x4A0FAC7: virCPUDefCopyWithoutModel (cpu_conf.c:235)
by 0x4A0FBBE: virCPUDefCopy (cpu_conf.c:273)
by 0x10E3C0: testUtilsHostCpusGetDefForArch (testutilshostcpus.h:157)
by 0x10E3C0: fakeHostCPU (domaincapstest.c:61)
by 0x10E3C0: fillQemuCaps (domaincapstest.c:86)
by 0x10E3C0: test_virDomainCapsFormat (domaincapstest.c:234)
by 0x10F4BC: virTestRun (testutils.c:146)
by 0x10DE93: doTestQemuInternal (domaincapstest.c:301)
by 0x10E13D: doTestQemu (domaincapstest.c:332)
by 0x1124CF: testQemuCapsIterate (testutilsqemu.c:635)
by 0x10DCE3: mymain (domaincapstest.c:435)
by 0x10FD8B: virTestMain (testutils.c:916)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Assuming that the backing image format is raw is wrong when doing image
detection:
1) In -drive mode qemu will still probe the image format of the backing
image. This means it will try to open a backing file of the image
which will fail if a more advanced security model is in use.
2) In blockdev mode the image will be opened as raw actually which is
wrong since it might be qcow. Not opening the backing images will
also end up in the guest seeing corrupted data.
Rather than attempt to solve various corner cases when us assuming the
storage file being raw and actually being right forbid startup when the
guest image doesn't have the format specified in the metadata.
https://bugzilla.redhat.com/show_bug.cgi?id=1588373
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
EXP_WARN and ALLOW_PROBE flags for the testStorageChain cases are no
longer used so we can remove them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pass in 'true' as '@report_broken' of virStorageFileGetMetadata to make
it fail in the tests. The most important code paths (when starting the
VM) expect this function to fail rather than silently return partial
data. Switch the test to exercise this more important code path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Prior to commit 55ce656463 (first in libvirt 4.6.0), the XML sent to
virDomainAttachDeviceFlags() was parsed only once, and the results of
that parse were inserted into both the live object of the running
domain and into the persistent config. Thus, if MAC address was
omitted from in XML for a network device (<interface>), both the live
and config object would have the same MAC address.
Commit 55ce656463 changed the code to parse the incoming XML twice -
once for live and once for config. This does eliminate the problem of
PCI (/scsi/sata) address conflicts caused by allocating an address
based on existing devices in live object, but then inserting the
result into the config (which may already have a device using that
address), BUT it also means that when the MAC address of a network
device hasn't been specified in the XML, each copy will get a
different auto-generated MAC address.
This results in the MAC address of the device changing the next time
the domain is shutdown and restarted, which creates havoc with the
guest OS's network config.
There have been several discussions about this in the last > 1 year,
attempting to find the ideal solution to this problem that makes MAC
addresses consistent and accounts for all sorts of corner cases with
PCI/scsi/sata addresses. All of these discussions fizzled out because
every proposal was either too difficult to implement or failed to fix
some esoteric case someone thought up.
So, in the interest of solving the MAC address problem while not
making the "other address" situation any worse than before, this patch
simply adds a qemuDomainAttachDeviceLiveAndConfigHomogenize() function
that (for now) copies the MAC address from the config object to the
live object (if the original xml had <mac address='blah'/> then this
will be an effective NOP (as the macs already match)).
Any downstream libvirt containing upstream commit
55ce656463 should have this patch as well.
https://bugzilla.redhat.com/1783411
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The intent of get_nonnull_domain() is not to validate virDomain
as sent by the client but just to construct the virDomain
structure. The validation is then done in each API when looking
up the domain in our internal hash tables.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There are some functions which pass virConnectPtr around for one
reason and one reason only: to obtain virLXCDriverPtr in the end.
Might replace the argument and pass a pointer to the driver right
from the start.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If we use glib alloc functions, we can drop the 'cleanup' label
and @rv variable and also simplify the code a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Some variables are not used outside of the for() loop. Move their
declaration to clean up the code a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
When using the monolithic daemon, then dom->conn has all driver
tables filled in properly and thus it's safe to call an API other
than virDomain*(). However, when using split daemons then
dom->conn has only hypervisor driver table set
(dom->conn->driver) and the rest is NULL. Therefore, if we want
to call a non-domain API (virNetworkLookupByName() in this case),
we have obtain the cached connection object accessible via
virGetConnectNetwork().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If we use glib alloc functions, we can drop the 'cleanup' label
and @rv variable and also simplify the code a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Some variables are not used outside of the for() loop. Move their
declaration to clean up the code a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
When using the monolithic daemon, then dom->conn has all driver
tables filled in properly and thus it's safe to call an API other
than virDomain*(). However, when using split daemons then
dom->conn has only hypervisor driver table set
(dom->conn->driver) and the rest is NULL. Therefore, if we want
to call a non-domain API (virNetworkLookupByName() in this case),
we have obtain the cached connection object accessible via
virGetConnectNetwork().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If we place qemuDomainInterfaceAddresses() a few lines below the
two functions its using then we can drop forward declarations of
those functions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
While at bugfixing, convert the whole function to the new-style memory
allocation handling.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
Pick 256k as the limit.
While -Wno-frame-larger-than would make more sense for usage
in our test suite, the -Wno version seems to have no effect
if -Wframe-larger-than was already specified.
Use an (un)reasonably large value instead.
Fixes the build with clang:
../../tests/cputest.c:964:1: error: stack frame size of 33176 bytes
in function 'mymain' [-Werror,-Wframe-larger-than=]
mymain(void)
^
1 error generated.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
My commit e73889b631
split the -Wframe-larger-than warning setting into
two different variables - STRICT_FRAME_LIMIT_CFLAGS
for the library code and RELAXED_FRAME_LIMIT_CFLAGS
which was needed for tests.
Use the strict limit by default and specify the warning
flag twice for the parts that require a larger stack
frame, relying on the fact that the compiler will pick
up the latter value.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is slightly more complicated because NVMe disk source is not
a simple attribute to <source/> element. The format in which the
PCI address and namespace ID are printed is the same as QEMU
accepts them:
nvme://XXXX:XX:XX.X/X
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
With NVMe disks, one can start a blockjob with a NVMe disk
that is not visible in domain XML (at least right away). Usually,
it's fairly easy to override this limitation of
qemuDomainGetMemLockLimitBytes() - for instance for hostdevs we
temporarily add the device to domain def, let the function
calculate the limit and then remove the device. But it's not so
easy with virStorageSourcePtr - in some cases they don't
necessarily are attached to a disk. And even if they are it's
done later in the process and frankly, I find it too complicated
to be able to use the simple trick we use with hostdevs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
At the very beginning of the attach function the
qemuDomainStorageSourceChainAccessAllow() is called which
modifies CGroups, locks and seclabels for new disk and its
backing chain. This must be followed by a counterpart which
reverts back all the changes if something goes wrong. This boils
down to calling qemuDomainStorageSourceChainAccessRevoke() which
is done under 'error' label. But not all failure branches jump
there. They just jump onto 'cleanup' label where no revoke is
done. Such mistake is easy to do because 'cleanup' label does
exist. Therefore, dissolve 'error' block in 'cleanup' and have
everything jump onto 'cleanup' label.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Because this is a HMP we're dealing with, there is nothing like
class of reply message, so we have to do some string comparison
to guess if the command fails. Well, with NVMe disks whole new
class of errors comes to play because qemu needs to initialize
IOMMU and VFIO for them. You can see all the messages it may
produce in qemu_vfio_init_pci().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Now, that we have everything prepared, we can generate command
line for NVMe disks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This capability tracks if qemu is capable of:
-drive file.driver=nvme
The feature was added in QEMU's commit of v2.12.0-rc0~104^2~2.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This function is currently not called for any type of storage
source that is not considered 'local' (as defined by
virStorageSourceIsLocalStorage()). Well, NVMe disks are not
'local' from that point of view and therefore we will need to
call this function more frequently.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If a domain has an NVMe disk configured, then we need to allow it
on devices CGroup so that qemu can access it. There is one caveat
though - if an NVMe disk is read only we need CGroup to allow
write too. This is because when opening the device, qemu does
couple of ioctl()-s which are considered as write.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There are couple of places where a domain with a VFIO device gets
special treatment: in CGroups when enabling/disabling access to
/dev/vfio/vfio, and when creating/removing nodes in domain mount
namespace. Well, a NVMe disk is a VFIO device too. Fortunately,
we have this qemuDomainNeedsVFIO() function which is the only
place that needs adjustment.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If a domain has an NVMe disk configured, then we need to create
/dev/vfio/* paths in domain's namespace so that qemu can open
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
We have this beautiful function that does crystal ball
divination. The function is named
qemuDomainGetMemLockLimitBytes() and it calculates the upper
limit of how much locked memory is given guest going to need. The
function bases its guess on devices defined for a domain. For
instance, if there is a VFIO hostdev defined then it adds 1GiB to
the guessed maximum. Since NVMe disks are pretty much VFIO
hostdevs (but not quite), we have to do the same sorcery.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The qemu driver has its own wrappers around virHostdev module (so
that some arguments are filled in automatically). Extend these to
include NVMe devices too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The device configs (which are actually the same one config)
come from a NVMe disk of mine.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Now that we have virNVMeDevice module (introduced in previous
commit), let's use it int virHostdev to track which NVMe devices
are free to be used by a domain and which are taken.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This module will be used by virHostdevManager and it's inspired
by virPCIDevice module. They are very similar except instead of
what makes a NVMe device: PCI address AND namespace ID. This
means that a NVMe device can appear in a domain multiple times,
each time with a different namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This function will return true if any of disks (or their backing
chain) for given domain contains an NVMe disk.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This function will return true if there's a storage source of
type VIR_STORAGE_TYPE_NVME, or false otherwise.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
To simplify implementation, some restrictions are added. For
instance, an NVMe disk can't go to any bus but virtio and has to
be type of 'disk' and can't have startupPolicy set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There is this class of PCI devices that act like disks: NVMe.
Therefore, they are both PCI devices and disks. While we already
have <hostdev/> (and can assign a NVMe device to a domain
successfully) we don't have disk representation. There are three
problems with PCI assignment in case of a NVMe device:
1) domains with <hostdev/> can't be migrated
2) NVMe device is assigned whole, there's no way to assign only a
namespace
3) Because hypervisors see <hostdev/> they don't put block layer
on top of it - users don't get all the fancy features like
snapshots
NVMe namespaces are way of splitting one continuous NVDIMM memory
into smaller ones, effectively creating smaller NVMe-s (which can
then be partitioned, LVMed, etc.)
Because of all of this the following XML was chosen to model a
NVMe device:
<disk type='nvme' device='disk'>
<driver name='qemu' type='raw'/>
<source type='pci' managed='yes' namespace='1'>
<address domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There are going to be more disk types that are considered unsafe
with respect to migration. Therefore, move the error reporting
call outside of if() body and rework if-else combo to switch().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This helper is cleaner than plain memcpy() because one doesn't
have to look into virPCIDeviceAddress struct to see if it
contains any strings / pointers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In near future we will have a list of PCI devices we want to
re-attach to the host (held in virPCIDeviceListPtr) but we don't
have virDomainHostdevDefPtr. That's okay because
virHostdevReAttachPCIDevices() works with virPCIDeviceListPtr
mostly anyway. And in very few places where it needs
virDomainHostdevDefPtr are not interesting for our case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In near future we will have a list of PCI devices we want to
detach (held in virPCIDeviceListPtr) but we don't have
virDomainHostdevDefPtr. That's okay because
virHostdevPreparePCIDevices() works with virPCIDeviceListPtr
mostly anyway. And in very few places where it needs
virDomainHostdevDefPtr are not interesting for our case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Sometimes, we have a PCI address and not fully allocated
virPCIDevice and yet we still want to know its /dev/vfio/N path.
Introduce virPCIDeviceAddressGetIOMMUGroupDev() function exactly
for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Previous patches rendered some of 'cleanup' labels needless.
Drop them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Now that all callers of qemuDomainGetHostdevPath() handle
/dev/vfio/vfio on their own, we can safely drop handling in this
function. In near future the decision whether domain needs VFIO
file is going to include more device types than just
virDomainHostdev.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There are several variables which could be automatically freed
upon return from the function. I'm not changing @tmpPaths (which
is a string list) because it is going to be removed in next
commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In near future, the decision what to do with /dev/vfio/vfio with
respect to domain namespace and CGroup is going to be moved out
of qemuDomainGetHostdevPath() because there will be some other
types of devices than hostdevs that need access to VFIO.
All functions that I'm changing (except qemuSetupHostdevCgroup())
assume that hostdev we are adding/removing to VM is not in the
definition yet (because of how qemuDomainNeedsVFIO() is written).
Fortunately, this assumption is true.
For qemuSetupHostdevCgroup(), the worst thing that may happen is
that we allow /dev/vfio/vfio which was already allowed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
qemuBuildSoundCodecStr() validates if a given QEMU binary
supports the sound codec. This validation can be moved to
qemu_domain.c to be executed in domain define time.
The codec validation was moved to the existing
qemuDomainDeviceDefValidateSound() function.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of QEMU_CAPS_OBJECT_USB_AUDIO and
QEMU_CAPS_DEVICE_ICH9_INTEL_HDA to a new function in qemu_domain.c,
qemuDomainDeviceDefValidateSound(). This function is called by
qemuDomainDeviceDefValidate() to validate the sound device
in domain define time.
qemuxml2xmltest.c was adjusted to add the now required caps for
domain definition.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemuBuildTPMDevStr() does TPM model validation that can be moved to
qemu_domain.c, allowing validation in domain define time. This patch
moves it to the existing qemuDomainDeviceDefValidateTPM() function.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Console validation is currently being done by qemuBuildConsoleCommandLine().
This patch moves it to a new qemuDomainDefValidateConsole() function. This
new function is then called by qemuDomainDefValidate(), validating the
console in domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the SPICE caps validation from qemuBuildGraphicsSPICECommandLine()
to a new function called qemuDomainDeviceDefValidateSPICEGraphics().
This function is called by qemuDomainDeviceDefValidateGraphics(),
which in turn is called by qemuDomainDefValidate(), validating the graphics
parameters in domain define time.
This validation move exposed a flaw in the 'default-video-type' tests
for PPC64, AARCH64 and s390 archs. The XML was considering 'spice' as
the default video type, which isn't true for those architectures.
This was flying under the radar until now because the SPICE validation
was being made in 'virsh start' time, while the XML validation done in
qemuxml2xmltest.c considers define time.
All other tests were adapted to consider SPICE validation in this
earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the VNC cap validation from qemuBuildGraphicsVNCCommandLine()
to qemuDomainDeviceDefValidateGraphics(). This function is called by
qemuDomainDefValidate(), validating the graphics parameters in domain
define time.
Tests were adapted to consider SDL validation in this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are validations for SDL, VNC, SPICE and EGL_HEADLESS
around several BuildGraphics*CommandLine in qemu_command.c. This
patch starts to move all of them to qemu_domain.c, inside the
existent qemuDomainDeviceDefValidateGraphics() function. This
function is called by qemuDomainDefValidate(), validating the
graphics parameters in domain define time.
In this patch we'll move the SDL validation code from
qemuBuildGraphicsSDLCommandLine(). Tests were adapted to consider
SDL validation in this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the pcihole64 validation being done by
qemuBuildGlobalControllerCommandLine() to the existing function
qemuDomainDeviceDefValidateControllerPCI(), which provides
domain define time validation.
The existing pcihole64 validations in qemu_domain.c were replaced
by the ones moved from qemu_command.c. The reason is that they
are more specific, allowing VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT
and VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT to have distinct validation,
with exclusive QEMU caps and machine types.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the boot validation being done by qemuBuildBootCommandLine()
to to a new qemuDomainDefValidateBoot() function. This new function
is called by qemuDomainDefValidate(), allowing boot validation in
domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the PM validation being done by qemuBuildPMCommandLine() to
to a new qemuDomainDefValidatePM() function. This new function
is called by qemuDomainDefValidate(), promoting PM validation in
domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
@def->clock validation is done by qemuBuildClockCommandLine() and
qemuBuildClockArgStr(). This patch centralize the validation done
in both these functions to a new qemuDomainDefValidateClockTimers()
function. This new function is then called by qemuDomainDefValidate(),
promoting clock validation in domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QEMU_CAPS_DEVICE_VMGENID is now being validated by
qemuDomainDefValidate().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of qemuBuildHostdevCommandLine() to
qemuDomainDeviceDefValidateHostdev() and qemuDomainMdevDefValidate(),
allowing them to be validated at domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of QEMU_CAPS_CHARDEV_FILE_APPEND and
QEMU_CAPS_CHARDEV_LOGFILE to qemuDomainChrSourceDefValidate().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of QEMU_CAPS_USB_HUB to a new function in
qemu_domain.c, qemuDomainDeviceDefValidateHub(). This function is
called by qemuDomainDeviceDefValidate() to validate the sound device
in domain define time.
qemuxml2xmltest.c was adjusted to add the now required caps for
domain definition.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A new function qemuDomainDeviceDefValidateNVRAM() was created
to validate the NVRAM in domain define time. Unit test was
adjusted to account for the extra QEMU_CAPS_DEVICE_NVRAM required
during domain define.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A new qemuDomainDefValidateNuma() function was created to host
all the QEMU caps validation being done inside qemuBuildNumaArgStr().
This new function is called by qemuDomainValidateCpuCount()
to allow NUMA validation in domain define time.
Tests were changed to account for the QEMU capabilities
that need to be present at domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Next patch will validate QEMU_CAPS_NUMA_DIST in a new qemu_domain.c
function. The code to verify if a NUMA node distance is being
set will still be needed in qemuBuildNumaArgStr() though.
To avoid code repetition, let's put this logic in a helper to be
used in qemuBuildNumaArgStr() and in the new function.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Validation of MACHINE_KERNEL_IRQCHIP and MACHINE_KERNEL_IRQCHIP_SPLIT
QEMU caps are now being done in qemuDomainDefValidateFeatures().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virQEMUCapsSupportsVmport() is now being called inside
qemuDomainDefValidateFeatures() for VIR_DOMAIN_FEATURE_VMPORT
feature.
qemuxml2xmltest.c was changed to account for this caps being
now validated at domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce a new function called qemuDomainDefValidatePSeriesFeature()
that will center all the PSeries validation done in qemu_command.c.
qemuDomainDefValidatePSeriesFeature() is then called during domain
define time, in qemuDomainDefValidateFeatures().
qemuxml2argvtest.c is also changed to include all the caps that now
are being validated in define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These days libvirt is pretty reliable and even remote connections
(not the default for libvirt-guests anyway) either work or fail but are
uncommon to be flaky.
On the other hand users might have disabled the service and while we are
After=libvirtd for ordering we are not Requiring it. Adding that or any
harder dependency might break our ordering. But if people have disabled
libvirt they will do a full retry loop until timeout.
Lets drop the loop to be much faster if a remote is not reachable.
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1854653
This reverts
commit 4e7fc8305a
Author: Michal Prívozník <mprivozn@redhat.com>
Date: Fri Feb 21 12:46:08 2014 +0100
libvirt-guests: Wait for libvirtd to initialize
The race described in that commit no longer exists using systemd as
we now have socket activation. If not using systemd, then it is also
safe if using the libvirtd --daemon flag, since the parent process
won't return to the caller until the child is accepting connections.
Reported-by: Doug Smythies <dsmythies@telus.net>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
There is plenty of distributions that haven't switched to
systemd nor they force their users to (Gentoo, Alpine Linux to
name a few). With the daemon split merged their only option is to
still use the monolithic daemon which will go away eventually.
Provide init scripts for these distros too.
For now, I'm not introducing config files which would correspond
to the init files except for libvirtd and virtproxyd init scripts
where it might be desirable to tweak the command line of
corresponding daemons.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
To free the structs and save the error, it is not necessary to hold @priv->lock,
therefore move these parts after the mutex unlock.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
This patch introduces virNetServerGetProgramLocked. It's a function to
determine which program has to be used for a given @msg. This function
will be reused in the next patch.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
As a result, you can later determine during the callback which program
was used. This makes it easier to refactor the code in the future and
is less prone to error.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use the return value of virObjectRef directly. This way, it's easier
for another reader to identify the reason why the additional reference
is required.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Following domain configuration changes create two memory bandwidth
monitors: one is monitoring the bandwidth consumed by vCPU 0,
another is for vCPU 5.
```
<cputune>
<memorytune vcpus='0-4'>
<node id='0' bandwidth='20'/>
<node id='1' bandwidth='30'/>
+ <monitor vcpus='0'/>
</memorytune>
+ <memorytune vcpus='5'>
+ <monitor vcpus='5'/>
+ </memorytune>
</cputune>
```
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Huaqiang <huaqiang.wang@intel.com>
Originally, inside <cputune/cachetune>, it requires the <cache> element to
be in the position before <monitor>, and following configuration is not
permitted by schema, but it is better to let it be valid.
<cputune>
<cachetune vcpus='0-1'>
<monitor level='3' vcpus='0-1'/>
^
|__ Not permitted originally because it is in the place
before <cache> element.
<cache id='0' level='3' type='both' size='3' unit='MiB'/>
<cache id='1' level='3' type='both' size='3' unit='MiB'/>
</cachetune>
...
</cputune>
And, let schema do more strict check by identifying following configuration to
be invalid, due to <cachetune> should contain at least one <cache> or <monitor>
element.
<cputune>
<cachetune vcpus='0-1'>
^
|__ a <cachetune> SHOULD contain at least one <cache> or <monitor>
</cachetune>
...
</cputune>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Huaqiang <huaqiang.wang@intel.com>
We learned that the hardware features of CAT, CMT, MBA and MBM
are orthogonal ones, if CAT or MBA is not supported in system,
but CMT or MBM are supported, then the cache monitor or
memoryBW monitor features may not be correctly displayed in
host capabilities through command 'virsh capabilites'.
Showing the cache/memoryBW monitor capabilities even there is
no support of cache allocation or memoryBW allocation features.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Huaqiang <huaqiang.wang@intel.com>
As of commit 2a00ef6e71 which
was released in v5.2.0, we require YAJL to build the QEMU driver.
Remove the checks from code that requires the QEMU driver
or checks that also check for WITH_QEMU.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Both the application developer guide and virsh command
reference are unmaintained for best part of 8 years, and
so horrifically out of date. This does not give a good
impression to people reading the docs. Now that we are
publishing the man pages online, those are a better
doc to read for virsh. We can also highlight the API
reference instead of the app dev guide.
The virsh command reference & app dev guide will
still exist on the web root, but will not be linked
to.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add Hygon Dhyana CPU data test case related files.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Yingle Hou <houyingle@hygon.cn>
Add Hygon Dhyana CPU model to the processor model.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Yingle Hou <houyingle@hygon.cn>
The x86ModelParseSignatures function makes an assumption that CPU signature
model equals 0 as an invalid case. While in Hygon processor definition, A1
version (model 0, stepping 1) is mass production version, to support Hygon
Dhyana A1 version, we have removed CPU signature model zero checking condition.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Yingle Hou <houyingle@hygon.cn>
CVE-2019-11135
When TSX_CTRL bit of IA32_ARCH_CAPABILITIES MSR is set to 1, the CPU
supports IA32_TSX_CTRL MSR which can be used to disable and/or mask TSX.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
CVE-2019-11135
CPUs with TAA_NO bit of IA32_ARCH_CAPABILITIES MSR set to 1 are not
vulnerable to TSX Asynchronous Abort and passing this bit to a guest
may avoid unnecessary mitigations.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow backups work across external snapshots we need to improve the
algorithm which calculates which bitmaps to merge.
The algorithm must look for appropriately named bitmaps in the image and
possibly descend into a backing image if the current image does not have
the bitmap.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This function looks up a named bitmap for a virStorageSource in the data
returned from query-named-block-nodes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add test code which will crawl a fake internal list of checkpoints and
generate the list of bitmaps for merging to gather the final bitmap for
the backup.
The initial tests cover the basic case of all bitmaps being present in
the top layer of the backing chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The function will require the bitmap topology for the full
implementation. To facilitate testing, add the propagation of the
necessary data beforehand so that the test code can stay unchanged
during the changes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Separate the for now incomplete code that collects the bitmaps to be
merged for an incremental backup into a separate function. This will
allow adding testing prior to the improvement of the algorithm to
include snapshots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The object itself has no extra value and it would make testing the code
harder. Refactor it to remove just the definition pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add test data gathered from a run of qemu after creating bitmaps and
snapshots together in various combinations.
The following sequence of commands was used to achieve the
configuration:
virsh checkpoint-create-as VM --name a
virsh snapshot-create-as VM --disk-only
virsh snapshot-create-as VM --disk-only
virsh checkpoint-create-as VM --name b
virsh checkpoint-create-as VM --name c
virsh snapshot-create-as VM --disk-only
virsh checkpoint-create-as VM --name d
virsh snapshot-create-as VM --disk-only
virsh checkpoint-create-as VM --name current
Note that VM was restarted after these operations to allow renumbering
of the bitmaps in a more human-readable way.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Re-create any active persistent bitmap in the snapshot overlay image so
that tracking for a checkpoint is persisted. While this basically
duplicates data in the allocation map it's currently the only possible
way as qemu can't mirror the allocation map into a dirty bitmap if we'd
ever want to do a backup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemuDomainSnapshotDiskPrepareOne is already called for each disk which
is member of the snapshot so we don't need to iterate through the
snapshot list again to generate members of the 'transaction' command for
each snapshot.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The real data gathered for the 'basic' test case don't exercise some
fields. Add a copy with a few values modified manually.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Test the extraction of data about changed block tracking bitmaps. The
first test case adds a simple scenario of multiple bitmaps in one layer.
The test data will be also later reused for testing the code that
determines which bitmaps to merge for an incremental backup.
The sequence of bitmaps was created by the libvirt checkpoint API with
the following sequence of commands:
virsh checkpoint-create-as VM --name a
virsh checkpoint-create-as VM --name b
virsh checkpoint-create-as VM --name c
virsh checkpoint-create-as VM --name d
virsh checkpoint-create-as VM --name current
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For testing purposes it will be beneficial to be able to parse the data
from JSON directly rather than trying to simulate the monitor. Extract
the worker bits and export them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We will need to inspect the presence and attributes for dirty bitmaps.
Extract them when processing reply of query-named-block-nodes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Support for the mips architecture has been dropped from Debian
sid. Move the mipsel job from Debian 9 to Debian sid at the same
time to keep things balanced.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The use of the parseOpaque parameter was mistakenly removed in
commit 4a4132b462
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Dec 3 10:49:49 2019 +0000
conf: don't use passed in caps in post parse method
causing the method to re-fetch qemuCaps that were already just
fetched and put into parseOpaque.
This is inefficient when parsing incoming XML, but for live
XML this is more serious as it means we use the capabilities
for the current QEMU binary on disk, rather than the running
QEMU.
That commit, however, did have a useful side effect of fixing
a crasher bug in the qemu post parse callback introduced by
commit 5e939cea89
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Thu Sep 26 18:42:02 2019 +0200
qemu: Store default CPU in domain XML
The qemuDomainDefSetDefaultCPU() method in that patch did not
allow for the possibility that qemuCaps would be NULL and thus
resulted in a SEGV.
This shows a risk in letting each check in the post parse
callback look for qemuCaps == NULL. The safer option is to
check once upfront and immediately stop (postpone) further
validation.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Don't check os type / virt type / arch in the post-parse callback
because we can't assume qemuCaps is non-NULL at this point. It
also conceptually belongs to the validation callback.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The status XML represents a running VM, so we should always have an
ID present for the domain.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This function will be removed in a future commit because it allows the
caller to acquire both monitor and agent jobs at the same time. Holding
both job types creates a vulnerability to denial of service from a
malicious guest agent.
qemuDomainSetVcpusFlags() always passes NONE for either the monitor job
or the agent job (and thus is not vulnerable to the DoS), so we can
simply replace this function with the functions for acquiring the
appropriate type of job.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have to assume that the guest agent may be malicious so we don't want
to allow any agent queries to block any other libvirt API. By holding
a monitor job while we're querying the agent, we open ourselves up to a
DoS.
Split the function so that the portion issuing the agent command only
holds an agent job and the portion issuing the monitor command holds
only a monitor job.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have to assume that the guest agent may be malicious so we don't want
to allow any agent queries to block any other libvirt API. By holding a
monitor job while we're querying the agent, we open ourselves up to a
DoS.
So split the function up a bit to only hold the monitor job while
querying qemu for whether the domain supports suspend. Then acquire only
an agent job while issuing the agent suspend command.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have to assume that the guest agent may be malicious so we don't want
to allow any agent queries to block any other libvirt API. By holding
a monitor job while we're querying the agent, we open ourselves up to a
DoS.
Split the function so that we only hold the appropriate type of job
while rebooting.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have to assume that the guest agent may be malicious so we don't want
to allow any agent queries to block any other libvirt API. By holding
a monitor job while we're querying the agent, we open ourselves up to a
DoS. So split the function into separate parts: one that does the agent
shutdown and one that does the monitor shutdown. Each part holds only a
job of the appropriate type.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the uses passing a single parameter as the length.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the usage where sanity of the length argument is verified
by other conditions not matching the previous patches.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We abort on allocation errors now so there is no need to
have a function for it.
Replace the only use by return -1, chosen by fair dice roll.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
My hesitation to remove VIR_STRDUP without VIR_STRNDUP resulted
in these being able to sneak in.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some versions of the rst2man convertor are buggy failing to
cope with syntax highlighting in code blocks.
This isn't something we really need for the man page code
blocks, so we can just delete the highlighting directive.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 7be5fe66cd.
This commit broke resctrl, because it missed the fact that the
virResctrlInfoGetCache() has side-effects causing it to actually
change the virResctrlInfo parameter, not merely get data from
it.
This code will need some refactoring before we can try separating
it from virCapabilities again.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The CI build machinery is intentionally not handled by autotools,
so for VPATH builds - which are mandatory now - we need to make
sure we're looking into $(srcdir).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This commit aims to fix
https://bugzilla.redhat.com/show_bug.cgi?id=1610207
The cause was apparently incorrect handling of jobs in snapshot
revert code which allowed a thread executing snapshot delete to
begin job while snapshot revert was still running on another
thread. The snapshot delete thread then waited on a condition
variable in qemuMonitorSend() while the revert thread finished,
changing (and effectively corrupting) the qemuMonitor structure
under the delete thread which led to its crash.
The incorrect handling of jobs in revert code was due to the fact
that although qemuDomainRevertToSnapshot() correctly begins a job
at the start, the job was implicitly ended when qemuProcessStop()
was called because the job lives in the QEMU driver's private
data (qemuDomainObjPrivate) that was purged during
qemuProcessStop().
This fix prevents qemuProcessStop() from clearing jobs as the
idea of qemuProcessStop() clearing jobs seems wrong in the first
place. It was (inadvertently) introduced in commit
888aa4b6b9, which is effectively reverted by
the second hunk of this commit. To preserve the desired effects
of the faulty commit, the first hunk is included as suggested by
Michal.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When QEMU uid/gid is set to non-root this is pointless as if we just
used a regular setuid/setgid call, the process will have all its
capabilities cleared anyway by the kernel.
When QEMU uid/gid is set to root, this is almost (always?) never
what people actually want. People make QEMU run as root in order
to access some privileged resource that libvirt doesn't support
yet and this often requires capabilities. As a result they have
to go find the qemu.conf param to turn this off. This is not
viable for libguestfs - they want to control everything via the
XML security label to request running as root regardless of the
qemu.conf settings for user/group.
Clearing capabilities was implemented originally because there
was a proposal in Fedora to change permissions such that root,
with no capabilities would not be able to compromise the system.
ie a locked down root account. This never went anywhere though,
and as a result clearing capabilities when running as root does
not really get us any security benefit AFAICT. The root user
can easily do something like create a cronjob, which will then
faithfully be run with full capabilities, trivially bypassing
the restriction we place.
IOW, our clearing of capabilities is both useless from a security
POV, and breaks valid use cases when people need to run as root.
This removes the clear_emulator_capabilities configuration
option from qemu.conf, and always runs QEMU with capabilities
when root. The behaviour when non-root is unchanged.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The keycodemap tool is told to generate docs in rst format now
instead of pod.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The rst2man tool is provided by python docutils, and as the name
suggests, it converts RST documents into man pages.
The intention is that our current POD docs will be converted to
RST format, allowing one more use of Perl to be eliminated from
libvirt.
The manual pages will now all be kept in the docs/manpages/ directory,
which enables us to include the man pages in the published website.
This is good for people searching for libvirt man pages online as it
makes it more likely google will send them to the libvirt.org instead
of some random third party man page site with outdated content.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We no longer support python2, so using a file based dep for rst2html
is not required. We do still have to do special casing for RHEL-7
though as the RPM is annoyingly different.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The generated man pages were previously bundled in the dist, so pod2man
was inside the autotools conditional. We no longer bundle any generated
files in the dist though, so pod2man must always be present.
rst2html then mistakenly just followed what pod2man did.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Pull in changes which support use of RST for docs output format
instead of POD.
The generator tool has changed its command line arg handling
so all args must be after the command name. The docs title and
subtitle must be specified separately too.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The recent specfile addition broke syntax-check:
cppi: ../libvirt.spec.in: line 338: not properly indented
cppi: ../libvirt.spec.in: line 341: not properly indented
cppi: ../libvirt.spec.in: line 344: not properly indented
Fixes: ac063cb2e7
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Our website is written assuming HTML5 standard & doctype:
commit b1c81567c7
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Jul 26 18:01:25 2017 +0100
docs: switch to using HTML5 doctype declaration
so we want the RST conversion to also use HTML5. Ubuntu 16.04 still
only has the HTML4 generating tools though, so we have that as a
fallback.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With all plumbing in place, we can now enable the new functionality.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since blockcommit is asynchronous, libvirtd can be restarted while the
operation runs. To ensure the information necessary to finish up the job
is not lost, serialisation to and deserialisation from the status XML is
added.
To unittest this, the new element was only added to the active commit test,
the non-active commit test doesn't have the new element so as to test its
absence.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When blockcommit finishes successfully, one of the
qemuBlockJobProcessEventCompletedCommit() and
qemuBlockJobProcessEventCompletedActiveCommit() event handlers is called.
This is where the delete flag (stored in qemuBlockJobCommitData since the
previous commit) can actually be used to delete the committed snapshot
images if requested.
We use virFileRemove() instead of a simple unlink() to cover the case where
the image to be removed is on an NFS volume.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Propagate the delete flag from qemuDomainBlockCommit() (which was just
ignoring it until now) to qemuBlockJobDiskNewCommit() where it can be
stored in the qemuBlockJobCommitData structure which holds information
necessary to finish the job asynchronously.
In the actual qemuBlockJobDiskNewCommit() in this commit, we temporarily
pass a literal 'false' to preserve the current behaviour until the whole
implementation of the feature is in place.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Teach virt-aa-helper how to label a qcow2 data_file, tracked internally
as externalDataStore. It should be treated the same as its sibling
disk image
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Adjust virLXCDriverGetCapabilities to fill in driver->caps if it is
empty, regardless of the passed 'refresh' value. This matches the
pattern used in virQEMUDriverGetCapabilities
This fixes LXC XML startup parsing for me
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Clang complains about condition being always true:
src/util/virkeyfile.c:113:23: error: result of comparison of constant 128 with expression of type 'const char' is always true [-Werror,-Wtautological-constant-out-of-range-compare]
while (!IS_EOF && IS_ASCII(CUR) && CUR != ']')
^~~~~~~~~~~~~
src/util/virkeyfile.c:80:26: note: expanded from macro 'IS_ASCII'
~~~ ^ ~~~
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extend configure to pass the detect python binary to C code, and
use it in the test suite, rather than searching PATH
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The path needs to be adjusted for the new script location
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The .pc files in src/ are intended for use with the ./run script,
to ease building bindings against an uninstalled libvirt build.
The pointer to the API XML files is incorrect though, it needs to
point into the build tree.
This fixes use of the run script for building libvirt-python, ex:
/path/to/libvirt.git/run ./setup.py build
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
GLib doesn't provide alternative to c_isascii and this is the only usage
of that macro so define a replacement ourselves.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The same way how we have IS_EOL in two files where we actually need it
defince IS_BLANK so we can drop usage of c_isblank.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This flag will allow figuring out whether the hypervisor supports the
incremental backup and checkpoint features.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the individual sub-blockjobs of a backup libvirt job finish we
must detect it and notify the parent job, so that it can be properly
terminated.
Since we update job information to determine success of a blockjob we
can directly report back also statistics of the blockjob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the helper which cancels all blockjobs to perform the backup job
cancellation in qemuDomainAbortJob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use the output of 'query-jobs' to figure out some useful
information about a backup job. That is progress in case of a push job
and scratch file use in case of a pull job.
Add a worker which will total up the data and call it from
qemuDomainGetJobStatsInternal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The stats reported for a blockjob which is member of a domain pull
backup refer to the utilization of the scratch file rather than the
progress of the backup as the progress of the backup depends on the
client. Note this quirk in the docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need a place to store stats of completed sub-jobs so that we can
later report accurate stats.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A backup blockjob needs to be able to notify the parent backup job as
well as track all data to be able to clean up the bitmap and blockdev
used for the backup.
Add the data structure, job allocation function and status XML formatter
and parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Store the data of a backup job along with the index counter for new
backup jobs in the status XML. Currently we will support only one
backup job and thus there's no necessity to add arrays of jobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A backup job may consist of many backup sub-blockjobs. Add the new
blockjob type and add all type converter strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will want to use the async job infrastructure along with all the APIs
and event for the backup job so add the backup job as a new async job
type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce QEMU_DOMAIN_JOB_STATS_TYPE_BACKUP and the convertors and other
plumbing to be able to report statistics for the backup job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Accept XML describing a generic block job, and output it again as
needed. This may still need a few tweaks to match the documented XML
and RNG schema.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a few new public APIs related to incremental backups. This
builds on the previous notion of a checkpoint (without an existing
checkpoint, the new API is a full backup, differing from
virDomainBlockCopy in the point of time chosen and in operation on
multiple disks at once); and also allows creation of a new checkpoint
at the same time as starting the backup (after all, an incremental
backup is only useful if it covers the state since the previous
backup).
A backup job also affects filtering a listing of domains, as well as
adding event reporting for signaling when a push model backup
completes (where the hypervisor creates the backup); note that the
pull model does not have an event (starting the backup lets a third
party access the data, and only the third party knows when it is
finished).
The full list of new APIs:
virDomainBackupBegin;
virDomainBackupGetXMLDesc;
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prepare for new backup APIs by describing the XML that will represent
a backup. The XML resembles snapshots and checkpoints in being able
to select actions for a set of disks, but has other differences. It
can support both push model (the hypervisor does the backup directly
into the destination file) and pull model (the hypervisor exposes an
access port for a third party to grab what is necessary). Add
testsuite coverage for some minimal uses of the XML.
The <disk> element within <domainbackup> tries to model the same
elements as a <disk> under <domain>, but sharing the RNG grammar
proved to be hairy. That is in part because while <domain> use
<source> to describe a host resource in use by the guest, a backup job
is using a host resource that is not visible to the guest: a push
backup action is instead describing a <target> (which ultimately could
be a remote network resource, but for simplicity the RNG just
validates a local file for now), and a pull backup action is instead
describing a temporary local file <scratch> (which probably should not
be a remote resource). A future refactoring may thus introduce some
way to parameterize RNG to accept <disk type='FOO'>...</disk> so that
the name of the subelement can be <source> for domain, or <target> or
<scratch> as needed for backups. Future patches may improve this area
of code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A pull mode backup job uses temporary disk images to hold the changed
parts of the disk while the client is copying the changes. Since usage
of the temporary space can be monitored but doesn't really fit any of
the existing stats fields introduce new fields for reporting this data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
$ cat f | grep -e arch -e emulator
<type arch='mipsel'>hvm</type>
$ sudo virsh define f
error: Failed to define domain from f
error: An error occurred, but the cause is unknown
After:
$ sudo virsh define f
error: Failed to define domain from f
error: unsupported configuration: No emulator found for arch 'mipsel'
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The virDomainVideoDefNew requires the xml options to be
provided since
commit 3dbf3941ad
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Mon Sep 23 14:44:35 2019 +0400
conf: add privateData to virDomainVideoDef
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Old GCC isn't happy about the {0} initializer because the first
field in the struct is itself a struct.
../../tests/openvzutilstest.c: In function 'testReadNetworkConf':
../../tests/openvzutilstest.c:101:12: error: missing braces around initializer [-Werror=missing-braces]
struct openvz_driver driver = {0};
^
This fixes commit 4a4132b462
Signed-off-by: Daniel Berrange <berrange@localhost.localdomain>
'cfg' is never initialized here, which causes a crash
later in qemuCheckpointCreateFinalize
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
For any backing file we set 'read-only' to true, but didn't do this when
modifying the recorded backing store when creating external snapshots.
This meant that qemu would attempt to open the backing-file read-write.
This would fail for example when selinux is used as qemu doesn't have
write permission for the backing file.
https://bugzilla.redhat.com/show_bug.cgi?id=1781079
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nearly all internal APIs use the QEMU capabilities or other
QEMU driver data directly, there's no compelling benefit to create
virCapsPtr at driver startup.
Skipping this means we don't probe capabilities for all 30 system
emulator targets at startup, only those emulators which are referenced
by an XML doc. This massively improves libvirtd startup time when the
capabilities cache is not populated. It even improves startup time
when the cache is up to date, as we don't bother to load files from
the cache until we need them.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We always refresh the capabilities object when using virResctrlInfo
during process startup. This is undesirable overhead, because we can
just directly create a virResctrlInfo instead.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Avoid grabbing the whole virCapsPtr object when we only need the
host CPU information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Annoyingly there was no existing constructor, and identifying all the
places which do a VIR_ALLOC(cpu) is a bit error prone. Hopefully this
has found & converted them all.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Avoid grabbing the whole virCapsPtr object when we only need the
NUMA information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NUMA cells are stored directly in the virCapsHostPtr
struct. This moves them into their own struct allowing
them to be stored independantly of the rest of the host
capabilities. The change is used as an excuse to switch
the representation to use a GPtrArray too.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the domain XML APIs don't use virCapsPtr we can stop passing it
around many QEMU driver methods.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This parameter is now unused and can be removed entirely.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the impls of this callback require the virCapsPtr param.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the impls of this callback require the virCapsPtr param.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
No impl of this callback requires the virCapsPtr anymore.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only user of this callback did not require the virCapsPtr parameter.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU impl of the callback can directly use the QEMU capabilities
cache to resolve the emulator binary name, allowing virCapsPtr to be
dropped.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virCapsPtr param is not used by any of the virt drivers providing
this callback.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of using the virCapsPtr to get the default security model,
pass this in via the parser config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the disk and chardev seclabels are validated immediately at
the time their data is parsed. This forces the parser to fill in the
top level secmodel at time of parsing which is an undesirable thing.
This validation conceptually should be done in the post-parse phase
instead.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of using the virCapsPtr information, pass the driver specific
netprefix in the domain parser struct. This eliminates one more use of
virCapsPtr from the XML parsing/formatting code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To enable the virCapsPtr parameter to the post parse method to be
eliminated, the drivers must fetch the virCapsPtr from their own
driver via the opaque parameter, or use an alternative approach
to validate the parsed data.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The XML parser currently calls virCapabilitiesDomainDataLookup during
parsing to find the domain capabilities matching the triple
(virt type, os type, arch)
This is, however, bogus with the QEMU driver as it assumes that there
is an emulator known to the default driver capabilities that matches
this triple. It is entirely possible for the driver to be parsing an
XML file with a custom emulator path specified pointing to a binary
that doesn't exist in the default driver capabilities. This will,
for example be the case on a RHEL host which only installs the host
native emulator to /usr/bin. The user can have built a custom QEMU
for non-native arches into $HOME and wish to use that.
Aside from validation, this call is also used to fill in a machine type
for the guest if not otherwise specified. Again, this data may be
incorrect for the QEMU driver because it is not taking account of
the emulator binary that is referenced.
To start fixing this, move the validation to the post-parse callbacks
where more intelligent driver specific logic can be applied.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When parsing the guest XML we must fill in the default guest arch if it
is not already present because later parts of the parsing process need
this information.
If no arch is specified we lookup the first guest in the capabilities
data matching the os type and virt type. In most cases this will result
in picking the host architecture but there are some exceptions...
- The test driver is hardcoded to always use i686 arch
- The VMWare/ESX drivers will always place i686 guests ahead
of x86_64 guests in capabilities, so effectively they always
use i686
- The QEMU driver can potentially return any arch at all
depending on what combination of QEMU binaries are installed.
The domain XML hardware configurations are inherently architecture
specific in many places. As a result whomever/whatever created the
domain XML will have had a particular architecture in mind when
specifying the config. In pretty much any sensible case this arch
will have been the native host architecture. i686 on x86_64 is
the only sensible divergance because both these archs are
compatible from a domaain XML config POV.
IOW, although the QEMU driver can pick an almost arbitrary arch as its
default, in the real world no application or user is likely to be
relying on this default arch being anything other than native.
With all this in mind, it is reasonable to change the XML parser to
allow the default architecture to be passed via the domain XML options
struct. If no info is explicitly given then it is safe & sane to pick
the host native architecture as the default for the guest.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Moving their instance parameter to be the first one, and give consistent
ordering of other parameters across all functions. Ensure that the xml
options are passed into both functions in prep for future work.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Our normal practice is for the object type to be the name prefix, and
the object instance be the first parameter passed in.
Rename these to virDomainObjSave and virDomainDefSave moving their
primary parameter to be the first one. Ensure that the xml options
are passed into both functions in prep for future work.
Finally enforce checking of the return type and mark all parameters
as non-NULL.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the virQEMUCapsPtr objects are just empty. Future patches are
going to expect them to contain real data. Start off by populating the
machine types and arch information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate the need to use virCapsPtr for anything
other than the virConnectGetCapabilies() API impl, cache the host arch
against the QEMU driver struct and use that field directly.
In the tests we move virArchFromHost() globally in testutils.c so that
every test runs with a fixed default architecture reported.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This option can be used to override the destination host name used for
TLS verification.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Normally the TLS certificate from the destination host must match the
host's name for TLS verification to succeed. When the certificate does
not match the destination hostname and the expected cetificate's
hostname is known, this parameter can be used to pass this expected
hostname when starting the migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The functions for converting migration typed parameters to QEMU
migration parameters and back were only implemented for integer types.
This patch adds support for string parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
With blockdev we need to refer to the nodename of the disk source image
as the source argument for the blockdev-mirror operation while still
keeping the old job name. With blockdev we must also persist the job in
qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Separate out allocation of the virStorageSource corresponding to the
target NBD export of the migration.
As part of the splitout we allocate the export name explicitly as that
one must not change regardless whether blockdev is used or not to
provide compatibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The non-shared-storage migration tracks the storage source used
explicitly in the migration data so we must allow for processing of the
block job which has NULL mirror as the mirror will not be populated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that the cleanup section does not exist remove the label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemuMigrationSrcNBDCopyCancelOne uses the block job data structure but
generated it's own job name rather than taking it from the block job
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With -blockdev we must use the nodename as the export but we must keep
the name of the export as it was before to ensure compatiblity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Declare the variable inside the loop with automatic clearing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Where appropriate replace the open coded call with the qemu wrapper
which already reports the error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With this patch users can cold unplug some sound devices.
use "virsh detach-device vm sound.xml --config" command.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jidong Xia <xiajidong@cmss.chinamobile.com>
On Debian 10, pdwtags reliably segfaults when parsing the libvirt remote
protocol files. This crash was previously ignored by 'make check'
because of the way we piped the pdwtags output to the perl
post-processing scripts. When this was converted to use python it
mistakenly started being a fatal error. We need to explicitly ignore
pdwtags output if it exited with non-zero return code.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In v5.8.0-rc1~122 we've removed the only use of @safename in
qemuMonitorTextLoadSnapshot(). What we are left with is an
declared but not initialized variable that is passed to
VIR_FREE().
Caught by libvirt-php test suite.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
KVM dedicated performance hint is added since qemu version 2.10.0 not
2.10.1.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In v5.9.0-370-g8fa0374c5b I've tried to fix a bug by removing
some stale XATTRs in qemuProcessStop(). However, I forgot to
do nothing when the VIR_QEMU_PROCESS_STOP_NO_RELABEL flag was
specified.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Until now we only really aborted migration via qemuDomainAbortJob. This
will change with the upcoming addition of the backup job. Additionally
there were a bunch of if statements checking various aspects of the
current job.
To make it more obvious convert qemuDomainAbortJob to use a switch
statement and move the individual conditions to the appropriate job
type.
Every job type has now it's own case despite multiple job types just
plainly cancelling the job for clarity and future extension.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Following patch will refactor qemuDomainAbortJob to use a per-job-type
switch where we will need to abort a migration job in various branches.
Save some code duplication by introducing a helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The libvirt RPM packaging is quite fine grained but it is not obvious to
users which package is best to install. Add a kbase doc that describes
the different RPMs, and illustrates some example deployment use cases.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a semi-automated conversion. The first conversion is done using
"pandoc -f html -t rst". The result is then editted manually to apply
the desired heading markup, and fix a few things that pandoc gets wrong.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a semi-automated conversion. The first conversion is done using
"pandoc -f html -t rst". The result is then editted manually to apply
the desired heading markup, and fix a few things that pandoc gets wrong.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a semi-automated conversion. The first conversion is done using
"pandoc -f html -t rst". The result is then editted manually to apply
the desired heading markup, and fix a few things that pandoc gets wrong.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a semi-automated conversion. The first conversion is done using
"pandoc -f html -t rst". The result is then editted manually to apply
the desired heading markup, and fix a few things that pandoc gets wrong.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a semi-automated conversion. The first conversion is done using
"pandoc -f html -t rst". The result is then editted manually to apply
the desired heading markup, and fix a few things that pandoc gets wrong.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a semi-automated conversion. The first conversion is done using
"pandoc -f html -t rst". The result is then editted manually to apply
the desired heading markup, and fix a few things that pandoc gets wrong.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Most importantly we document the required heading markup so that we get
consistency across the docs. Also mention that docs should have a table
of contents if they have headings & are likely longer than one page of
text.
The 3-space indent rule may sound wierd, but that's what python has
recommended and thus what tools like pandoc emit. Rather than try to
reindent things to 4-space, just accept this RST norm.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Although <tt> is deprecated in HTML5, the rst2html command will still
emit it, in preference to <code> tags, so we must style it too.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We currently only render pretty tables if they have the "top_table"
class set. All of our tables set this, except for the ACL & migration
doc tables, which should have set it, and the API reference which does
not want it.
Simplify life by rendering all tables in a pretty style and remove the
need for the "top_table" class entirely. A small rule turns off the
pretty style for the API reference where tables are a hack used to
render enums with horizontal alignment.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The rst2html output generates the links for headings in a slightly
different way than we do for docs written in HTML, so we must match
another scenario when generating back links.
rst2html will also use <h1> tags for both the document title and
the first level of section titles, so we must expand the matching
to allow for this too.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The HTML from rst2html doesn't have <h1> immediately under the <body>
tag, instead there is at least one <div> in between.
There are also many things added in the <head> section that we don't
want to have copied over, since our templating system already adds
suitable <head> elements.
We only need to copy the <script> to make index.html work.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The rst2html tool is provided by python docutils, and as the name
suggests, it converts RST documents into HTML.
Basic rules are added for integrating RST docs into the website
build process.
This enables us to start writing docs on our website in RST format
instead of HTML, without changing the rest of our website templating
system away from XSLT yet.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The docs about remote URIs in uri.html are somewhat sparse with the full
docs being in remote.html. Move all the URI content from remote.html
into uri.html so the user only needs to look in one place for URI info.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The generation and deployment of x509 certificates for TLS is complex
and verbose and thus deserves its own standalone page.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The script needs two files to open:
$(builddir)/test_file_access.txt, and
$(srcdir)/file_access_whitelist.txt.
However, the script is opening the files from the $CWD which
won't work for a VPATH build. Make the script accept paths to the
files through @ARGV and tune the Makefile.am to pass them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the test-wrap-argv.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the pdwtags processing script in Python.
The original inline shell and perl code was completely
unintelligible. The new python code is a manual conversion
that attempts todo basically the same thing.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
python2 will be end of life by the time of the next
libvirt release. All our supported build targets, including
CentOS7, have a python3 build available.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since the max unit of virtio scsi disk is 16383, update the range of
driveUnit to it.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduced in c8007fdc5d, it should use 'greater than max' instead of
'equal or greater than max' for the condition of checking invalid scsi
unit.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If we static link to libvirt_util.la then we can't override functions in
this file by simply implementing them in the test code. Any tests should
dynamic link to the main libvirt.la and ensure symbols are exported.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The python array slice syntax expects the first and last indexes,
not the first length and element count.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The hard dependancy between the virt drivers and the network
or storage drivers was removed quite a while back now, so
the tests no longer need to link to these drivers.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As of 0985a9597b we no longer distribute generated files. mingw
needs to call genprotocol.pl itself, which means it needs rpcgen
and cpp installed.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We clear some capabilities here so the lockouts need to be
re-evaluated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Blockdev is required to do incremental backups properly. Add a helper
function for locking out capabilities and export it to allow re-doing
the processing if a different code path modifies capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Checking whether a qemu capability set right before clearing it without
any other logic doesn't make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Do all post-processing of capabilities in qemuProcessPrepareQEMUCaps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Move the post-processing of the QEMU_CAPS_CHARDEV_FD_PASS flag to the
new function.
The clearing of the capability is based on the presence of
VIR_QEMU_PROCESS_START_STANDALONE so we must also pass in the process
start flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Start aggregating all capability post-processing code in one place.
The comment was modified while moving it as it was mentioning floppies
which are no longer clearing the blockdev capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is now used only in qemu_process.c so move it there and
name it 'qemuProcessPrepareQEMUCaps' which is more appropriate to what
it's doing.
The reworded comment now mentions that it will also post-process the
caps for VM startup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The redetection was originally added in 43c01d3838 as a way to recover
from libvirtd upgrade from the time when we didn't persist the qemu
capabilities in the status XML. Also this the oldest supported qemu by
more than two years.
Even if somebody would have a running VM running at least qemu 1.5 with
such an old libvirt we certainly wouldn't do the right thing by
redetecting the capabilities and then trying to communicate with qemu.
For now it will be the best to just stop considering this scenario any
more and error out for such VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit c90fb5a828 added explicit use of the private copy of the qemu
capabilities to various places. The change to qemuProcessInit was bogus
though as at the point where we re-initiate the post parse callbacks
priv->qemuCaps is still NULL as we clear it after shutdown of the VM and
don't initiate it until a later point.
Using the value from priv->qemuCaps might mislead readers of the code
into thinking that something useful is being passed at that point so go
with an explicit NULL instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainGetJobInfo didn't always reset the return data in @info.
Thankfully this wouldn't be a problem as the RPC layer does it but we
should do it anyways.
Since we reset the struct we don't have to set the type to
VIR_DOMAIN_JOB_NONE as the value is 0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The statistics fields are used in two places:
1) virDomainGetJobStats where the job type which ultimately holds
whether the job was successful or not is returned via a different
argument.
2) The virConnectDomainEventJobCompleted event where we report just the
statistics via typed parameters.
Since it might be useful to report the event also for jobs which
completed unsuccessfully and we don't have the means to transport the
state via a different variable with the event let's add a new field
which will hold the success state.
Since this is meant primarily for completed jobs a plain boolean is
sufficient to convey whether the job was successful or not.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce --rawstats which prints all statistics fields from the new API
similarly to how the virsh event handler prints them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce the --anystats flag which does not skip the printing of the
stats if the job was unsuccessful.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Printing that a job failed is rather unhelpful. Print at least the
operation which failed.
Achieve this by moving the check whether to print stats later but
replace it with a check which will skip printing of the operation if
there's no job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
virDomainGetJobStats destroys the completed statistics on the first
read. Give the user possibility to keep them around if they wish so.
Add a flag VIR_DOMAIN_JOB_STATS_KEEP_COMPLETED which will read the stats
without destroying them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
To simplify the stats printer code we convert the new statistics from
the typed parameter list into the old stats structure.
Extract this code since it takes a lot of space.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The 32-bit x86 binary is called qemu-system-i386, not
qemu-system-i686. This mistake across many test XML files was
not noticed because the mistake was also made in testutilsqemu.c
when mocking the capabilities.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For managed save we can choose between various compression
methods. I randomly tested the 'xz' program on a 8 GB guest
and was surprised to have to wait > 50 minutes for it to
finish compressing, with 'xz' burning 100% cpu for the
entire time. Despite the impressive compression, this is
completely useless in the real world as it is far too long
to wait to save the VM.
The 'xz' binary defaults to '-6' optimization level which
aims for high compression, with moderate memory usage,
at the expense of speed.
This change switches it to use the '-3' optimization level
which is documented as being the one that optimizes speed
at expense of compression. Even with this, it will still
outperform all the other options in terms of compression
level. It is a little less than x4 faster than '-6' which
means it starts to be a viable choice to use 'xz' for
people who really want best compression.
The test results on a 1 GB, fairly freshly booted VM are
as follows
format | save | restore size
=======+=======+=============
raw | 05s | 1s | 428 MB
lzop | 05s | 3s | 160 MB
gzip | 29s | 5s | 118 MB
bz2 | 54s | 22s | 114 MB
xz | 4m37s | 13s | 86 MB
xz -3 | 1m20s | 12s | 95 MB
Based on this we can say
* For moderate compression with no noticable loss in speed
=> use lzop
* For high compression with moderate loss in speed
=> use gzip
* For best compression with significant loss in speed
=> use xz
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit v5.7.0-248-g03449e2504 removed "cd tests" without updating the
patch to test-suite.log.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is a very simple and straightforward implementation of the opposite
what buildPool does for the disk backend.
The background for this change comes from an existing test case in TCK
which does use the delete method for a pool of type disk, but it
truly could not have ever worked since the implementation simply
wasn't there for the pool of type disk.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The news schema requires two digits for both month and day in the date
attribute. s/2/02/ in the day value of date to fix the following
'make check' failure
2165) Checking ../docs/news.xml against ../news.rng ...
libvirt: XML Util error : XML document failed to validate against schema:
Unable to validate doc against /home/jfehlig/virt/upstream/libvirt/build/../docs/schemas/../news.rng
Element release failed to validate attributes
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Commit 4b58fdf280 which enabled block copy also for network
destinations needed to limit when the 'mirror' storage source is
initialized in cases when we e.g. don't have an appropriate backend.
Limiting it just to virStorageFileSupportsCreate is too restrictive as
for example we can't precreate block devices and thus wouldn't
initialize the 'mirror' but since it's a local source we'd try to
examine it. This would fail since it wouldn't be initialized.
Fix it by introducing a more granular check whether certain operations
are supported and fix the check interlocks.
https://bugzilla.redhat.com/show_bug.cgi?id=1778058
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We tolerate image format detection during block copy in very specific
circumstances, but the code didn't error out on failure of the format
detection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The API XML files are generated files, so live in the build dir not the
source dir.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Gluster 6.0 is not built on i686 for RHEL-8, which prevents libvirt from
building. Let's just disable gluster there as all we need are client
libraries anyway.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
In v5.9.0-273-g8ecab214de I've tried to fix a lock ordering
problem, but introduced a crasher. Problem is that because the
client lock is unlocked (in order to honour lock ordering) the
stream we are currently checking in daemonStreamFilter() might be
freed and thus stream->priv might not even exist when the control
get to virMutexLock() call.
To resolve this, grab an extra reference to the stream and handle
its cleanup should the refcounter reach zero after the deref.
If that's the case and we are the only ones holding a reference
to the stream, we MUST return a positive value to make
virNetServerClientDispatchRead() break its loop where it iterates
over filters. The problem is, if we did not do so, then
"filter = filter->next" line will read from a memory that was
just freed (freeing a stream also unregisters its filter).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 2ccb5335dc I've refactored how we fill the typed parameters
for domain statistics. The commit introduced a regression in the
formating of stats for IOthreads by using the array index to label the
entries as it's common for all other types of statistics rather than
the iothread IDs used for iothreads.
Since only the design of iothread deviates from the common approach used
in all other statistic types this was not caught.
https://bugzilla.redhat.com/show_bug.cgi?id=1778014
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The original implementation used QEMU_ADD_COUNT_PARAM which added the
'count' suffix, but 'cnt' was documented. Fix the documentation to
conform with the original implementation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Before we rewrote nss plugin so that it doesn't use libvirt's
internal functions it used virLeaseReadCustomLeaseFile() to parse
.status files. After the rewrite it's using read() + yajl_parse()
+ yajl_complete_parse(). There's one catch though,
virLeaseReadCustomLeaseFile() skipped over empty files.
An empty .status file is created when a network is started. This
is because we configure dnsmasq to use our leasehelper. So the
first thing it does it calls it as follows:
DNSMASQ_INTERFACE=virbr0 /usr/libexec/libvirt_leaseshelper init
which causes the leasehelper to create empty virbr0.status file.
If there is only one libvirt network then that is no problem -
there are no other .status files to parse anyway. But if there
are two or more networks then the first empty .status file causes
whole parsing process and subsequently the whole name lookup
process to fail.
Fixes: v5.7.0-rc1~343
Reported-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
After generating the API HTML files we run xmllint in docs/html/*.html
to validate the correctness. Since
commit 0aa8536f14
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Nov 20 14:49:26 2019 +0000
docs: generate API reference pages for admin, qemu & lxc libraries
we have many rules generating files into docs/html/. The xmllint
calls for each rule are picking up files which are part-generated by
other parallel build rules resulting in transient errors like:
GEN html/index.html
GEN html/index-admin.html
GEN html/index-qemu.html
GEN html/index-lxc.html
GEN hvsupport.html.in
html/index-lxc.html:1: parser error : Document is empty
^
make[4]: *** [Makefile:2407: html/index-qemu.html] Error 1
The easiest solution is to move the xmllint rules to the 'make check'
phase of the build.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
On Fedora 31 with GCC 9.2.1, compiling qemuxml2argvtest takes
about 36 seconds since
commit 30c6d99209
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Thu Oct 24 17:51:42 2019 +0200
qemuxml2argvtest: Update host arch for DO_TEST*ARCH* tests
The optimizer is hitting some pathological performance behaviour due to
the high number of branches in the mymain() method.
Pushing the branch tests down into the testCompareXMLToArgv method
brings the compile time down to 3 seconds.
This likely related to this GCC bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58479
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virTypedParamsFilter function doesn't mind params == NULL if nparams
is zero. And there's no need to check for params == NULL && nparams > 0
because this is checked higher in the stack.
In fact all the virCheckNonNull* checks in virTypedParamsFilter are
useless.
https://bugzilla.redhat.com/show_bug.cgi?id=1777094
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The default macOS image in travis is broken, throwing python
exceptions when trying to install glib. Explicitly ask for the
newer 10.3 image which works correctly.
We now need to also point to the homebrew installed libxml2
rather than the OS distro provided one, since the OS distro
one has a pkg-config file present, but no actual header
files.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we have a separate job type which will not trigger normal code
paths for terminating job we can remove the ad-hoc handling.
This possibly fixes the issue of a broken job inheriting the disk and
then finishing in which case we'd not detach the backing chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
To better track jobs we couldn't parse let's introduce a new job type
which will clarify semantics internally in few places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
We will need to clear per-job type data when we will be marking a
blockjob as broken in the new way. Extract the code for future reuse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Both failure to refresh and to dismiss the job are very unlikely but if
they happen there's not much we can do about the blockjob.
The concluded job handlers treat it as if the job failed if we don't
update the state to 'QEMU_BLOCKJOB_STATE_COMPLETED' which is probably
the safest thing to do here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Otherwise it would get dropped later on as untracked despite us knowing
about it. Additionally since we cancelled it we must wait to dismiss it
which would not be possible if we unregister it. This also opened a
window for a race condition since the job state change event of the
just-cancelled job might be delivered prior to us unregistering the job
in which case everything would work properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Since we don't know what happened to the job we can't do much about it
but we can at least log that this happened.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
We must exit the monitor prior to refusing other work, otherwise the VM
object will become unusable.
This bug was introduced in commit v5.5.0-244-gc412383796 but thankfully
the code path was not excercised without QEMU_CAPS_BLOCKDEV.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Block jobs may be members of async jobs so it makes more sense to
refresh block job state after we do steps for async job recovery.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
qemu returns an error message in the job statistics even if the job was
cancelled to emphasize it was not successful. Libvirt didn't properly
transform it into QEMU_BLOCKJOB_STATE_CANCELLED though.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Commit ed56851f1b didn't wire up fetching of the statistics for the
job which are reported by 'query-jobs'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The magic number is taken from the coreutils stat.c file since
there is no constant for it in normal system headers.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 421c9550f5
qemuDomainBlockPullCommon calls virDomainObjEndAPI internally so the
original commit made us shed two references of @vm instead of one
getting us into a premature free of @vm.
This is not a straight revert as qemuDomainBlockPull was modified
meanwhile. I've also added a warning comment that @vm is consumed.
https://bugzilla.redhat.com/show_bug.cgi?id=1777230
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two daemons that wait for acquiring their pid files:
virtnetworkd and virtstoraged. This is undesirable as the idea
is to quit early if unable to acquire the pid file.
Fixes: v5.6.0-rc1~207.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit d30a1ad044 translated the symbol file checker from perl to
python by doing a literal translation in most cases. Unfortunately one
string formatting operation was not really translated into python
leaving users with non-helpful error:
'Symbol $1 is listed twice'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the past the network driver was (mistakenly) being called for all
interfaces, not just those of type='network', and so it had a chance
to validate all interface configs after the actual type of the
interface was known.
But since the network driver has been more completely/properly
separated from qemu, the network driver isn't called during the
startup of any interfaces except those with type='network', so this
validation no longer takes place for, e.g. <interface type='bridge'>
(or direct, etc). This in turn meant that a config could erroneously
specify a vlan tag, or bandwidth settings, for a type of interface
that didn't support it, and the domain would start without complaint,
just silently ignoring those settings.
This patch moves those validation checks out of the network driver,
and into virDomainActualNetDefValidate() so they will be done for all
interfaces, not just type='network'.
https://bugzilla.redhat.com/1741121
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
<interface> devices (virDomainNetDef) are a bit different from other
types of devices in that their actual type may come from a network (in
the form of a port connection), and that doesn't happen until the
domain is started. This means that any validation of an <interface> at
parse time needs to be a bit liberal in what it accepts - when
type='network', you could think that something is/isn't allowed, but
once the domain is started and a port is created by the configured
network, the opposite might be true.
To solve this problem hypervisor drivers need to do an extra
validation step when the domain is being started. I recently (commit
3cff23f7, libvirt 5.7.0) added a function to peform such validation
for all interfaces to the QEMU driver -
qemuDomainValidateActualNetDef() - but while that function is a good
single point to call for the multiple places that need to "start" an
interface (domain startup, device hotplug, device update), it can't be
called by the other hypervisor drivers, since 1) it's in the QEMU
driver, and 2) it contains some checks specific to QEMU. For
validation that applies to network devices on *all* hypervisors, we
need yet another interface validation function that can be called by
any hypervisor driver (not just QEMU) right after its network port has
been created during domain startup or hotplug. This patch adds that
function - virDomainActualNetDefValidate(), in the conf directory,
and calls it in appropriate places in the QEMU, lxc, and libxl
drivers.
This new function is the place to put all network device validation
that 1) is hypervisor agnostic, and 2) can't be done until we know the
"actual type" of an interface.
There is no framework for validation at domain startup as there is for
post-parse validation, but I don't want to create a whole elaborate
system that will only be used by one type of device. For that reason,
I just made a single function that should be called directly from the
hypervisors, when they are initializing interfaces to start a domain,
right after conditionally allocating the network port (and regardless
of whether or not that was actually needed). In the case of the QEMU
driver, qemuDomainValidateActualNetDef() is already called in all the
appropriate places, so we can just call the new function from
there. In the case of the other hypervisors, we search for
virDomainNetAllocateActualDevice() (which is the hypervisor-agnostic
function that calls virNetworkPortCreateXML()), and add the call to our
new function right after that.
The new function itself could be plunked down into many places in the
code, but we already have 3 validation functions for network devices
in 2 different places (not counting any basic validation done in
virDomainNetDefParseXML() itself):
1) post-parse hypervisor-agnostic
(virDomainNetDefValidate() - domain_conf.c:6145)
2) post-parse hypervisor-specific
(qemuDomainDeviceDefValidateNetwork() - qemu_domain.c:5498)
3) domain-start hypervisor-specific
(qemuDomainValidateActualNetDef() - qemu_domain.c:5390)
I placed (3) right next to (2) when I added it, specifically to avoid
spreading validation all over the code. For the same reason, I decided
to put this new function right next to (1) - this way if someone needs
to add validation specific to qemu, they go to one location, and if
they need to add validation applying to everyone, they go to the
other. It looks a bit strange to have a public function in between a
bunch of statics, but I think it's better than the alternative of
further fragmentation. (I'm open to other ideas though, of course.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
These all just return a scalar value, so there's no daisy-chained
fallout from changing them, and they can easily be combined in a
single patch.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This also isn't required (due to the vportprofile being stored in the
NetDef as a pointer rather than being directly contained), but it
seemed dishonest to not mark it as const (and thus permit users to
modify its contents)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In this case, the virNetDevBandwidthPtr that is returned is not to a
region within the virDomainNetDef arg, but points elsewhere (the
NetDef has the pointer, not the entire object), so technically it's
not necessary to make the return value a const, but it's a bit
disingenuous to *not* do it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This is needed if we want to call the function when the
virDomainNetDef* we have is a const.
Since virDomainNetGetActualVlan returns a pointer to memory that is
within the virDomainNetDefPtr arg, the returned pointer must also be
made const. This leads to a cascade of other virNetDevVlanPtr's that
must be changed to "const virNetDevVlan *".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This makes it easier to understand which interface's config caused the
error.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The cpuModels member of _virQEMUCapsAccel struct is not a
virObject but regular struct with a free function defined:
qemuMonitorCPUDefsFree(). Use that when clearing parent structure
instead of virObjectUnref() to avoid a memleak:
==212322== 57,275 (48 direct, 57,227 indirect) bytes in 3 blocks are definitely lost in loss record 623 of 627
==212322== at 0x4838B86: calloc (vg_replace_malloc.c:762)
==212322== by 0x554A158: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6000.6)
==212322== by 0x17B14BF5: qemuMonitorCPUDefsNew (qemu_monitor.c:3587)
==212322== by 0x17B27BA7: qemuMonitorJSONGetCPUDefinitions (qemu_monitor_json.c:5616)
==212322== by 0x17B14B0B: qemuMonitorGetCPUDefinitions (qemu_monitor.c:3559)
==212322== by 0x17A6AFBB: virQEMUCapsFetchCPUDefinitions (qemu_capabilities.c:2571)
==212322== by 0x17A6B2CC: virQEMUCapsProbeQMPCPUDefinitions (qemu_capabilities.c:2629)
==212322== by 0x17A70C00: virQEMUCapsInitQMPMonitorTCG (qemu_capabilities.c:4769)
==212322== by 0x17A70DDF: virQEMUCapsInitQMPSingle (qemu_capabilities.c:4820)
==212322== by 0x17A70E99: virQEMUCapsInitQMP (qemu_capabilities.c:4848)
==212322== by 0x17A71044: virQEMUCapsNewForBinaryInternal (qemu_capabilities.c:4891)
==212322== by 0x17A7119C: virQEMUCapsNewData (qemu_capabilities.c:4923)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
On s390 machines host-passthrough and host-model CPUs result in the same
guest ABI (with QEMU new enough to be able to tell us what "host" CPU is
expanded to, which was implemented around 2.9.0). So instead of using
host-passthrough CPU when there's no CPU specified in a domain XML we
can safely use host-model and benefit from CPU compatibility checks
during migration, snapshot restore and similar operations.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The match attribute is only relevant for custom mode CPUs. Reporting
failure when match == 'minimum' regardless on CPU mode can cause
unexpected failures. We should only report the error for custom CPUs. In
fact, calling virCPUs390Update on a custom mode CPU should always report
an error as optional features are not supported on s390 either.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most likely for historical reasons our CPU def formatting code is
happily adding useless <model fallback='allow'/> for host-model CPUs. We
can just drop it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit v0.8.4-66-g95ff6b18ec (9 years ago) changed the default value for
the cpu/@match attribute to 'exact' in a rather complicated way. It did
so only if <model> subelement was present and set -1 otherwise (which is
not expected to ever happen). Thus the following two equivalent XML
elements:
<cpu mode='host-model'/>
and
<cpu mode='host-model'>
<model/>
</cpu>
would be parsed differently. The former would end up with match == -1
while the latter would have match == 1 ('exact'). This is not a big deal
since the match attribute is ignored for host-model CPUs, but we can
simplify the code and make it a little bit saner anyway.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case for x86_64 and neither cirrus nor vga capability is of the
xml2argv type because it actually fails to parse the XML at all [*] which
is something that xml2xml tests don't seem to handle. xml2argv test fails
to produce a qemu argv for this case which xml2argv tests can handle.
[*] This is a consequence of the decision not to have a fallback if the
obvious choices (cirrus and vga) aren't viable due to missing QEMU caps.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
If a graphics device was added to XML that had no video device, libvirt
automatically added a video device which was always of type 'cirrus' on
x86_64, even if the underlying qemu didn't support cirrus.
This patch refines a bit the decision about the type of the video device.
Based on QEMU capabilities, cirrus is still preferred but only added if
QEMU supports it, otherwise VGA is used if supported by QEMU. There is now
no fallback as libvirt only aspires to generate a basic working config and
leaves anything more specific up to higher-level management tools.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
The test relied implicitly on default video device being cirrus. As we're
about to change that the test would start failing. To avoid this, just make
the test's requirement explicit.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
The default video device type selection algorithm we're about to deploy will
increase the amount of code dedicated to the task by amount enough to warrant
factoring the whole thing into its own function so as not to pollute the
caller qemuDomainDeviceVideoDefPostParse(). Do it now so that the actual
algorithm change later on is in a clean commit by itself and easy to review.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
The CentOS7 distro is quite old and the Ubuntu 18.04 distro
is already a year & half old. Adding a Fedora 31 image gives
us coverage of the newest stable distro release, and
fedora-rawhide gives us the cutting edge.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit f4db846c32.
This patch results in the following error when trying to start
essentially any VM with default network:
unsupported configuration: QOS must be defined for network 'default'
Coverity didn't see that the bandwidth == NULL it complained about in
virNetDevBandwidthPlug was already checked properly in
networkCheckBandwidth, thus causing networkPlugBandwidth to return 0
and finish before a call to virNetDevBandwidthPlug would have been even
made.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This previous commit introduced a simpler free callback for
hash data with only 1 arg, the value to free:
commit 49288fac96
Author: Peter Krempa <pkrempa@redhat.com>
Date: Wed Oct 9 15:26:37 2019 +0200
util: hash: Add possibility to use simpler data free function in virHash
It missed two functions in the hash table code which need
to call the alternate data free function, virHashRemoveEntry
and virHashRemoveSet.
After the previous patch though, there is no code that
makes functional use of the 2nd key arg in the data
free function. There is merely one log message that can
be dropped.
We can thus purge the current virHashDataFree callback
entirely, and rename virHashDataFreeSimple to replace
it.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virChrdevHashEntryFree method uses the hash 'key'
as the name of the logfile it has to remove. By storing
a struct as the value which contains the stream and
the dev path, we can avoid relying on the hash key
when free'ing entries.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that all pieces are in place (hopefully) let's enable -blockdev.
We base the capability on presence of the fix for 'auto-read-only' on
files so that blockdev works properly, mandate that qemu supports
explicit SCSI id strings to avoid ABI regression and that the fix for
'savevm' is present so that internal snapshots work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The 'savevm' HMP command didn't work properly with blockdev as it tried
to do snapshot of everything including the protocol nodes accessing
files which are not snapshottable. Qemu fixed this bug so now we need to
detect it to allow enabling blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The top level commands now can have 'feature' flags for fixes so add
support for querying those as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Initial implementation of 'auto-read-only' didn't reopen the backing
files when needed. For '-blockdev' to work we need to be able to tel
qemu to open a file read-only and change it during blockjobs as we label
backing chains with a sVirt label which does not allow writing. The
dynamic auto-read-only supports this as it reopens files when writing
is demanded.
Add a capability to detect that the posix file based backends support
the dynamic part.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The data is captured from qemu v4.2.0-rc2-19-g2061735ff0
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The qemu driver will obey <backingStore> when we support blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Until now we've only supported <backingStore> in an output mode. The
documentation for the element states that hypervisor drivers may start
to obey it in the future.
Update the documentation so that it mentions the recently added
'backingStoreInput' domain capability and explain what happens if it is
supported and <backingStore> is present on input.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Historically we've only supported the <backingStore> as an output-only
element for domain disks. The documentation states that it may become
supported on input. To allow management apps detectin once that happens
add a domain capability which will be asserted if the hypervisor driver
will be able to obey the <backingStore> as configured on input.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The XSL generator loads included HTML files relative to the source dir
but we need to tell it to load them from the build dir instead.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some of the web content is only present in the source tree, thus when
viewing pages from the build tree they appear missing.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The API cross reference files are not used since
commit d3043afe5c
Author: Daniel Veillard <veillard@redhat.com>
Date: Mon Jan 21 08:08:33 2008 +0000
Remove docs/API*.html
* docs/API* docs/api.xsl docs/site.xsl docs/Makefile.am: remove the
generation of the API*.html files as it's not really useful here
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Define automake variables for all the data we need built and installed
and let automake generate the install rules normally.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use a simple
if "substr" in line
before running a regular expression, which saves time,
especially if the regex has a capture group.
This reduces runtime of the check by almost 78 % for me.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
For checking whether a substring is present in a string,
using the pattern:
"str" in string
is slightly faster than:
string.find("str") != -1
Use it to shave off 4 % of the runtime of this script that
processes quite a few long source files.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Running regular expressions with capture groups is expensive.
Bail out early if the line does not start with a '#'.
This reduces the runtime of the check by two thirds.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Getting the hostname of a guest usually requires a in-guest agent,
or generally can be determined only on active domains.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If user starts a blockcommit or a blockcopy then we modify access
for qemu on both images and leave it like that until the job
terminates. So far so good. Problem is, if user instead of
terminating the job (where we would modify the access again so
that the state before the job is restored) calls destroy on the
domain or if qemu dies whilst executing the block job. In this
case we don't ever clear the access we granted at the beginning.
To fix this, maybe a bit harsh approach is used, but it works:
after all labels were restored (that is after
qemuSecurityRestoreAllLabel() was called), we iterate over each
disk in the domain and remove XATTRs from the whole backing chain
and also from any file the disk is being mirrored to.
This would have been done at the time of pivot, but it isn't
because user decided to kill the domain instead. If we don't do
this and leave some XATTRs behind the domain might be unable to
start.
Also, secdriver can't do this because it doesn't know if there is
any job running. It's outside of its scope - the hypervisor
driver is responsible for calling secdriver's APIs.
Moreover, this is safe to call because we don't remember labels
for any member of a backing chain except of the top layer. But
that one was restored in qemuSecurityRestoreAllLabel() call done
earlier. Therefore, not only we don't remember labels (and thus
this is basically a NOP for other images in the backing chain) it
is also safe to call this when no blockjob was started in the
first place, or if some parts of the backing chain are shared
with some other domains - this is NOP, unless a block job is
active at the time of domain destroy.
https://bugzilla.redhat.com/show_bug.cgi?id=1741456#c19
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are four places where we remove image XATTRs and in all of
them we have the same for() loop with the same body. Move it into
a separate function because I'm about to introduce fifth place
where the same needs to be done.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Install the convertor function which enables the internals that will use
-blockdev to make qemu open the firmware image and stop using -drive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The old way to instantiate a pflash device via -drive was a hack since
it's a platform device.
The modern approach calls for configuring it via -machine and takes the
node name as an argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As a first step we will build the blockdevs which will be supposed to
back the pflash drives when moving away from -drive.
This code is similar to the way we build the blockdevs for the disk, but
skips the copy-on-read layer and doesn't implement any legacy approach.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a helper which will covert the PFLASH code file and variable file
into the virStorageSource objects stored in private data so that we can
use them with -blockdev while keeping the infrastructure to determine
the path to the loaders intact.
This is a temporary solution until we will want to do snapshots of the
pflash where we will be forced do track the full backing chain in the
XML.
In the meanwhile just convert it partially so that we can stop using
-drive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
To allow converting the pflash drives to blockdev we will need a
virStorageSource to allow using our helpers. Temporarily prior to
coverting loader data to a virStorageSoruce add private data which will
house this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Extract the old way to instantiate pflash devices to hold the firmware
via -drive to a separate function so that it can later be conditionally
disabled when -blockdev will be used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 5751a0b6b1 added a helper function
called virDomainCapsFeaturesInitUnsupported which initialized all domain
capability features as unsupported.
When adding a new feature this would initialize it as unsupported also
for hypervisor drivers which the original author possibly didn't intend
to modify. To prevent accidental wrong value being reported in such case
revert back to initializing individual features in the hypervisor
drivers themselves.
This is not a straight revert as additonal patches modified how we store
the capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pre-Glib era which used malloc allowed the size of the client-side
buffers to be declared as 0, because malloc documents that it can either
return 0 or a unique pointer on 0 size allocations.
With glib this doesn't work anymore, because glib documents that for
such allocation requests NULL is always returned which results in an
error in our public API checks server-side.
This patch complements the fix in the RPC layer by explicitly erroring
out on the following combination of args used by our legacy APIs (their
moder equivalents don't suffer from this):
function(caller-allocated-array, size, ...) {
if (!caller-allocated-array && size > 0)
return error;
}
treating everything else as a valid input and potentially let that fail
on the server-side rather than client-side.
https://bugzilla.redhat.com/show_bug.cgi?id=1772842
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The qemu_domain_monitor_event_msg struct in qemu_protocol.x
defines event as a nonnull_string and qemuMonitorJSONIOProcessEvent
also errors out on a non-NULL event.
Drop the check to fix the build with static analysis.
This essentially reverts commit d343e8203d
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are currently broken use cases, e.g. snapshotting more than one disk at
once like:
$ virsh snapshot-create-as --domain eoan --disk-only --atomic
--diskspec vda,snapshot=no --diskspec vdb,snapshot=no
--diskspec vdc,file=/test/disk1.snapshot1.qcow,snapshot=external
--diskspec vdd,file=/test/disk2.snapshot1.qcow,snapshot=external
The command above will iterate from qemuDomainSnapshotCreateDiskActive and
eventually add /test/disk1.snapshot1.qcow first (appears in the rules)
to then later add /test/disk2.snapshot1.qcow and while doing so throwing
away the former rule causing it to fail.
All other calls to (re)load_profile already use append=true when adding
rules append=false is only used when restoring rules [1].
Fix this by letting AppArmorSetSecurityImageLabel use append=true as well.
Since this is removing a (unintentional) trigger to revoke all rules
appended so far we agreed on review to do some tests, but in the tests
no rules came back on:
- hot-plug
- hot-unplug
- snapshotting
Bugs:
https://bugs.launchpad.net/libvirt/+bug/1845506https://bugzilla.redhat.com/show_bug.cgi?id=1746684
[1]: https://bugs.launchpad.net/libvirt/+bug/1845506/comments/13
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
A lot of the code in AppArmorSetSecurityImageLabel is a duplicate of
what is in reload_profile, this refactors AppArmorSetSecurityImageLabel
to use reload_profile instead.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
While only used internally from libvirt the options still are misleading
enough to cause issues every now and then.
Group modes, options and an adding extra file and extend the wording of
the latter which had the biggest lack of clarity.
Both add a file to the end of the rules, but one re-generates the
rules from XML and the other keeps the existing rules as-is not
considering the XML content.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
When starting a domain without a CPU model specified in the domain XML,
QEMU will choose a default one. Which is fine unless the domain gets
migrated to another host because libvirt doesn't perform any CPU ABI
checks and the virtual CPU provided by QEMU on the destination host can
differ from the one on the source host.
With QEMU 4.2.0 we can probe for the default CPU model used by QEMU for
a particular machine type and store it in the domain XML. This way the
chosen CPU model is more visible to users and libvirt will make sure
the guest will see the exact same CPU after migration.
Architecture specific notes
- aarch64: We only set the default CPU for TCG domains as KVM requires
explicit "-cpu host" to work.
- ppc64: The default CPU for KVM is "host" thanks to some hacks in QEMU,
we will translate the default model to the model corresponding to the
host CPU ("POWER8" on a Power8 host, "POWER9" on Power9 host, etc.).
This is not a problem as the corresponding CPU model is in fact an
alias for "host". This is probably not ideal, but it's not wrong and
the default virtual CPU configured by libvirt is the same QEMU would
use. TCG uses various CPU models depending on machine type and its
version.
- s390x: The default CPU for KVM is "host" while TCG defaults to "qemu".
- x86_64: The default CPU model (qemu64) is not runnable on any host
with KVM, but QEMU just disables unavailable features and starts
happily.
https://bugzilla.redhat.com/show_bug.cgi?id=1598151https://bugzilla.redhat.com/show_bug.cgi?id=1598162
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU 4.2.0 will report default CPU types used by each machine type and
we will want to start using it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Almost all TCG query-machines replies match KVM. The only exceptions are
4.2.0 replies on s390x which differ in the reported default CPU type.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some specifics of machine types may depend on the accelerator and thus
the data should be moved to virQEMUCapsAccel. The TCG machine types are
just copied from the ones probed for KVM to simplify the changes to
qemucapabilitiestest data files.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function copies machine type data from one QEMU caps structure to
another.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In preparation for making machine types dependent on the accelerator,
the <machine> elements are formatted between <cpu type='kvm'> and
<cpu type='tcg'>.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All the code for formatting machine type data was moved to a standalone
virQEMUCapsFormatMachines function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All the code for loading machine type data was moved to a standalone
virQEMUCapsLoadMachines function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To avoid duplicating code which selects the right virQEMUCapsAccel data
to be filled during probing.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is a tiny wrapper around virQEMUCapsProbeQMPCPUDefinitions which will
soon get private parameters and thus it cannot be exposed outside
qemu_capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
And make it use virQEMUCapsGetAccel once rather than repeating the same
code in all functions called from virQEMUCapsFormatAccel.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
And make it use virQEMUCapsGetAccel once rather than repeating the same
code in all functions called from virQEMUCapsLoadAccel.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function can be used to get the pointer to all data which depend on
the accelerator.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is container for capabilities data that depend on the accelerator.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new functions are designed to load and format capabilities which
depend on the accelerator (host CPU expansion and CPU models).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to create a mapping between CPU model names and their
corresponding QOM types.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both virDomainCapsCPUModelsAdd and virDomainCapsCPUModelsAddSteal are so
simple we can just squash the code in a single function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will need to keep some QEMU-specific data for each CPU model
supported by a QEMU binary. Instead of complicating the generic
virDomainCapsCPUModelsPtr, we can just directly store
qemuMonitorCPUDefsPtr returned by the capabilities probing code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most of the code moved to a new virQEMUCapsFetchCPUDefinitions function
and the existing virQEMUCapsFetchCPUModels just becomes a small wrapper
around virQEMUCapsFetchCPUDefinitions and virQEMUCapsCPUDefsToModels.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The functions return virDomainCapsCPUModelsPtr and thus they should be
called *CPUModels for consistency. Functions called *CPUDefinitions will
work on qemuMonitorCPUDefsPtr.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function translates qemuMonitorCPUDefsPtr (used by QEMU caps probing
code) into virDomainCapsCPUModelsPtr used by domain capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While virDomainCapsCPUModel structure contains 'usable' field with
virDomainCapsCPUUsable type, the lower level structure specific to QEMU
driver used virTriStateBool for the same thing and we had to translate
between them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's store qemuMonitorCPUDefInfo directly in the array of CPUs in
qemuMonitorCPUDefs rather then using an array of pointers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is a container for a CPU models list (qemuMonitorCPUDefInfo) and a
number of elements in this list.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function would return a valid virDomainCapsCPUModelsPtr with empty
CPU models list if query-cpu-definitions exists in QEMU, but returns
GenericError meaning it's not in fact implemented. This behaviour is a
bit strange especially after such virDomainCapsCPUModels structure is
stored in capabilities XML and parsed back, which will result in NULL
virDomainCapsCPUModelsPtr rather than a structure containing nothing.
Let's just keep virDomainCapsCPUModelsPtr NULL if the QMP command is not
implemented and change the return value to int so that callers can
easily check for failure or success.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some callers of virQEMUCapsGetCPUDefinitions will need to filter the
returned list of CPU models. Let's add the filtering parameters directly
to virQEMUCapsGetCPUDefinitions to avoid copying the CPU models list
twice.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than returning a direct pointer the list stored in qemuCaps the
function now creates a new copy of the CPU models list.
The main purpose of this seemingly useless change is to update callers
to free the result returned by virQEMUCapsGetCPUDefinitions because the
internals of this function will change significantly in the following
patches.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Generated with "spapr/kvm: Set default cpu model for all machine
classes" fix for QEMU applied.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the genpolkit.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the check-aclrules.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the check-driverimpls.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the check-drivername.pl tool in Python.
This was mostly a straight conversion, manually going line-by-line
to change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
In testing though it was discovered the existing code was broken
since it hadn't been updated after driver.h was split into many
files. Since the old code is being thrown away, the fix was done
as part of the rewrite rather than split into a separate commit.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the gensystemtap.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the dtrace2systemtap.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
The "--with-modules" flag was dropped because this functionality
is not implicitly always enabled.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the check-symfile.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the check-symsorting.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the check-aclperms.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the header-ifdef.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the mock-noinline.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the new helper in qemuCheckpointDiscard rather than constructing the
array manually.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Another weird bug appeared concerning qemu namespaces. Basically
the problem is as follows:
1) Issue an API that causes libvirt to create a node in domain's
namespace, say /dev/nvme0n1 with 8:0 as major:minor (the API can
be attach-disk for instance). Or simply create the node from a
console by hand.
2) Detach the disk from qemu.
3) Do something that makes /dev/nvme0n1 change it's minor number.
4) Try to attach the disk again.
The problem is, in a few cases - like disk-detach - we don't
remove the corresponding /dev node from the mount namespace
(because it may be used by some other disk's backing chain). But
this creates a problem, because if the node changes its MAJ:MIN
numbers we don't propagate the change into the domain's
namespace. We do plain mknod() and ignore EEXIST which obviously
is not enough because it doesn't guarantee that the node has
updated MAJ:MIN pair.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1752978
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Last usage was removed by commit
<41f88886198e231285cc813f8c0687c8ec5c9488> and commit
<0f4d31720430b4e3735064cc0d8f88a1a438e154> forgot to drop include.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we use GRegex everywhere, there is no need for this module.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We replaced them by use of transaction to simplify possible failure
scenarios.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Delete/merge bitmaps when deleting checkpoints using a 'transaction' so
that we don't have to deal with halfway-failed scenarios and also fix
access to 'vm' while in the monitor lock.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
testSchemaDir is a helper which invokes the schema test using virTestRun
on all schema files. Since the function itself is not called inside
virTestRun any helper function call is not dispatched to the user and
thus it's hard to debug the test. Propagate errors from the directory
traversal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In cases when we call a libvirt helper which reports an error the error
would be hidden unless libvirt library debug is on. This produces a lot
of output and is hard to debug.
The helper provides a way to dispatch the libvirt error in specific
cases sice we do already dispatch it in case when virTestRun is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor various functions to avoid multiple freeing function calls.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When dispatching a message read from client it is first passed
through registered filters. If one of the filters consumes the
message no further processing of the message is done. However,
the filter callbacks are called with the client object locked.
This breaks lock ordering in case of virStream filter, we always
acquire stream private data lock without the client object
locked. In other words, the daemonStreamFilter() does not follow
the lock ordering.
Signed-off-by: LanceLiu <liu.lance.89@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If networkAllocatePort calls networkPlugBandwidth eventually the
port->bandwidth would be passed to virNetDevBandwidthPlug which
requires that the parameter is non-NULL. Coverity additionally
notes that since (!port->bandwidth) is checked earlier in the
networkAllocatePort method that the subsequent call to blindly
use if for a function that requires it needs to check.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We go through the trouble of checking {old|new}Bandwidth[->in] and
storing the result in local @old_floor and @new_floor, but then
we don't use them. Instead we make derefs to the longer name. This
caused Coverity to note dereferencing newBandwidth->in without first
checking @newBandwidth like was done for new_floor could cause a
NULL dereference.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Since g_strdup_printf will abort, we know @newfile won't be NULL.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The @def variable holds pointer to the domain defintion, but is
set only somewhere in the middle of the function. This is
suboptimal.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
As part of an goal to eliminate Perl from libvirt build tools,
rewrite the prohibit-duplicate-header.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qemuDomainDefFormatBufInternal function wasn't testing whether the CPU
was actually defined in the XML and saving such a domain resulted in the
following backtrace:
0 in qemuDomainMakeCPUMigratable (cpu=0x0)
1 in qemuDomainDefFormatBufInternal()
2 in qemuDomainDefFormatXMLInternal()
3 in qemuDomainDefFormatLive()
4 in qemuDomainSaveInternal()
5 in qemuDomainSaveFlags()
6 in qemuDomainSave()
7 in virDomainSave()
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit <f136b83139c63f20de0df3285d9e82df2fb97bfc> reworked process
affinity setting but did not take cgroups into account which introduced
an issue when starting VM with custom cpuset.cpus for the whole machine
group.
If the machine group is limited to some pCPUs libvirt should not try to
set a VM to run on all pCPUs as it will result in permission denied when
writing to cpuset.cpus.
To fix this the affinity has to be set separately from cgroups cpuset.
Resolves: <https://bugzilla.redhat.com/show_bug.cgi?id=1746517>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In functions implemented here we fill this attr union (type of
bpf_attr) and just pass it to syscall(2). Thing is that some of
the union members are type of __aligned_u64. This is not regular
uint64_t. This one is explicitly aligned to 8 bytes, while
uint64_t can be aligned to 4 bytes (on 32 bits). We've used
explicit typecast to uint64_t to shut compiler which would
otherwise complain of assigning a pointer into an integer. Well,
we have uintptr_t just for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In virCgroupV2DevicesReallocMap() we are debug printing both
arguments passed to the function. However, the @size argument is
type of size_t but '%lu' is used to format it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are some OSes which don't have syscall() nor
<sys/syscall.h>. We already check for the header file in
configure phase, so we just need to add check for
HAVE_SYS_SYSCALL_H to HAVE_DECL_BPF_PROG_QUERY.
While I'm at it, some header files we are including are not
needed, so their includes can be safely dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Fedora now advertises supported firmwares via descriptor files.
Since the upstream spec file assumes recent Fedora, remove the
build-time list of firmwares, which can produce a warning after
commit 75597f022a.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Ensure that both x and y are non-zero when resolution is specified for a
video device.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Since this function is now only called when an 'acceleration' element is
present in the xml, any failure to parse the element will be considered
an error.
Previously, we detected some types of errors, but we would only log an
error (virReportError()), but still return a partially-specified accel
object to the caller. This patch returns NULL for all parsing errors and
reports that error back up to the caller.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
The current code doesn't properly handle errors when parsing a video
device's resolution. We were returning a NULL structure for the case
where 'x' or 'y' were missing. But for the other error cases, we were
logging an error (virReportError()), but still returning an
under-specified structure. That under-specified structure was used by
the calling function rather than properly reporting an error.
This patch changes the parse function to return NULL on any parsing
error and changes the calling function to report an error when NULL is
returned.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Previously, we were passing the video "model" node to the "acceleration"
and "resolution" parsing functions and requiring them to iterate over
the children to discover and parse the appropriate node. It makes more
sense to move this responsibility up to the parent function and just
pass these functions the node that needs to be parsed.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Call first virCgroupNew on the parent group virCgroupNewPartition if
it is available on before the creation of the child group. This
ensures that the creation of a first level group on the unified
architecture, as the check at virCgroupV2ParseControllersFile as the
parent file is there.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1760233
Signed-off-by: Miguel Ángel Arruga Vivas <rosen644835@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The non-systemd configurations do not create system neither user
control groups. The title of the diagram referenced systemd too.
Signed-off-by: Miguel Ángel Arruga Vivas <rosen644835@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Glib implementation follows the ISO C99 standard so it's safe to replace
the gnulib implementation.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We need to mock virCgroupV2DevicesAvailable() in order to remove any
dependency on kernel as BPF devices might not be available.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So the issue here is that you can end up with configuration where
you have cgroup v1 and v2 enabled at the same time and the devices
controllers is enabled for cgroup v1.
In cgroup v2 there is no devices controller, the device access is
controlled using BPF and since it is not a cgroup controller both
of them can exists at the same time and both of them are applied while
resolving access to devices.
In order to avoid configuring both BPF and cgroup v1 devices we will
use BPF if possible and otherwise fallback to cgroup v1 devices.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we want to deny all devices we just need to replace any existing
program with new program with empty map.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we want to allow all devices with all permissions we need to replace
any existing program that has any rule configured, otherwise we just
need to add new rule which will for example allow read access to all
devices.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to deny device we need to check if there is any entry in BPF
map and we need to load the current value from map if there is already
entry for that device. If both values are same we can remove that entry
but if they are different we need to update the entry because we don't
have to deny all access, but for example only write access.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to allow device we need to create key and value which will be
used to update BPF map. virBPFUpdateElem() can override existing
entries in BPF map so we need to check if that entry exists in order to
track number of entries in our map.
This can add rule for specific device but major and minor can be both
-1 which follows the same behavior as in cgroup v1.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Device rules are stored in BPF map that is a hash type, this function
will create a key based on major and minor id of device.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to close our FD that we have for BPF program and map in order
to let kernel remove all resources once the cgroup is removed as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function will be called for every virCgroup(Allow|Deny)* API in
order to prepare BPF program for guest. Since libvirtd can be restarted
at any point we will first try to detect existing progam, if there is
none we will create a new empty BPF program and lastly if we don't have
any space left in the existing BPF map we will create a new copy of the
BPF map with more space and attach a new program with that map into the
guest cgroup.
This solution allows us to start with reasonably small BPF map consuming
only small amount of memory and if needed we can easily extend the BPF
map if there is a lot of host devices used in guest or if user wants to
hot-plug a lot of devices once the guest is running.
Since there is no way how to reallocate existing BPF map we need to
create a new copy if we run out of space in current BPF map.
This overcomes all the limitations in BPF:
- map used in program has to be created before the program is loaded
into kernel
- once map is created you cannot change its size
- you cannot replace map in existing program
- you cannot use an array of maps because it can store FD to maps
of one specific size so we would not be able to use it to overcome
the second issue
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function creates new BPF program with new empty BPF map with the
default size and attaches it to the guest cgroup.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function will be called if libvirtd was restarted while some
domains were running. It will try to detect existing programs attached
to the guest cgroup.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function loads the BPF prog with prepared map into kernel and
attaches it into guest cgroup. It can be also used to replace existing
program in the cgroup if we need to resize BPF map to store more rules
for devices. The old program will be closed and removed from kernel.
There are two possible ways how to create BPF program:
- One way is to write simple C-like code which can by compiled into
BPF object file which can be loaded into kernel using elfutils.
- The second way is to define macros which look like assembler
instructions and can be used directly to create BPF program that
can be directly loaded into kernel.
Since the program is not too complex we can use the second option.
If there is no program, all devices are allowed, if there is some
program it is executed and based on the exit status the access is
denied for 0 and allowed for 1.
Our program will follow these rules:
- first it will try to look for the specific key using major and
minor to see if there is any rule for that specific device
- if there is no specific rule it will try to look for any rule that
matches only major of the device
- if there is no match with major it will try the same but with
minor of the device
- as the last attempt it will try to look for rule for all devices
and if there is no match it will return 0 to deny that access
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is no exact way how to figure out whether BPF devices support is
compiled into kernel. One way is to check kernel configure options but
this is not reliable as it may not be available. Let's try to do
syscall to which will list BPF cgroup device programs.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to implement devices controller with cgroup v2 we need to
add support for BPF programs, cgroup v2 doesn't have devices controller.
This introduces required helpers wrapping linux syscalls.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some of our tests try to validate domain XMLs they are working
with (not intentionally, simply because they call top level
domain XML parse function). Anyway, this implies that we build
domain capabilities also - see
virQEMUDriverGetDomainCapabilities(). And since some domain XMLs
are type of 'kvm' the control gets through
virQEMUCapsFillDomainCaps() and virHostCPUGetKVMMaxVCPUs() to
opening /dev/kvm which may be missing on the machine we're
running 'make check'.
Previously, we did not see this issue, because it was masked. If
building domain capabilities failed for whatever reason, we
ignored the failure. Only v5.9.0-207-gc69e6edea3 uncovered the
problem (it changed reval from 0 to -1 if
virQEMUDriverGetDomainCapabilities() fails). Since the referenced
commit is correct, we need to mock access to /dev/kvm in our
tests.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some layered products such as oVirt have requested a way to avoid being
blocked by guest agent commands when querying a loaded vm. For example,
many guest agent commands are polled periodically to monitor changes,
and rather than blocking the calling process, they'd prefer to simply
time out when an agent query is taking too long.
This patch adds a way for the user to specify a custom agent timeout
that is applied to all agent commands.
One special case to note here is the 'guest-sync' command. 'guest-sync'
is issued internally prior to calling any other command. (For example,
when libvirt wants to call 'guest-get-fsinfo', we first call
'guest-sync' and then call 'guest-get-fsinfo').
Previously, the 'guest-sync' command used a 5-second timeout
(VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT), whereas the actual command that
followed always blocked indefinitely
(VIR_DOMAIN_QEMU_AGENT_COMMAND_BLOCK). As part of this patch, if a
custom timeout is specified that is shorter than
5 seconds, this new timeout is also used for 'guest-sync'. If there is
no custom timeout or if the custom timeout is longer than 5 seconds, we
will continue to use the 5-second timeout.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With g_mkstemp_full, there is no need to distinguish between
mkostemp and mkostemps (no suffix vs. a suffix of a fixed length),
because the GLib function looks for the XXXXXX pattern everywhere
in the string.
Use S_IRUSR | S_IWUSR for the permissions and do not pass O_RDWR
in flags since it's implied.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This saves us from allocating vars upfront, since GLib deals with
that for us.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Using GRegex simplifies the code since g_match_info_fetch will
copy the matched substring for us.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that the cleanup section is empty, the ret variable is no longer
necessary.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This flag is not needed to use extended regular expression syntax
with GRegex and it makes GRegex ignore whitespace in the regex.
Remove the unintended usage, even though it should not matter in this
case.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'ramfb' attribute provides a framebuffer to the guest that can be
used as a boot display for the vgpu
For example, the following configuration can be used to provide a vgpu
with a boot display:
<hostdev mode='subsystem' type='mdev' model='vfio-pci' display='on' ramfb='on'>
<source>
<address uuid='$UUID'/>
</source>
</hostdev>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
As suggested by Cole, this patch uses the domain capabilities to
validate the supported video model types. This allows us to remove the
model type validation from qemu_process.c and qemu_domain.c and
consolidates it all in a single place that will automatically adjust
when new domain capabilities are added.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Continue consolidation of video device validation started in previous
patch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
The goal is to move all of the video device validation to a single place
and use domain caps to validate the supported video device models. Since
qemuDomainDeviceDefValidateVideo() is called from
qemuProcessStartValidate(), these changes should not change anny
behavior.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
In a follow-up commit, we will use the domain capabilities to validate
video device configurations, which means that we also need to make sure
that the domain capabilities include the "none" video device.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
commit 9bfcf0f62d added the
QEMU_CAPS_DEVICE_RAMFB capability but did not set the domain capability.
This patch sets the domain capability for the ramfb device and updates
the tests.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Several tests were not specifying the necessary qemu capabilities for
what they were testing. Due to the way that the video devices are
currently validated, this is not causing any problems. But a change to
video device validation in a following patch would have exposed this
issue and resulted in multiple test failures about the domain
configuration not supporting particular video models.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
This allows us to simplify the function and avoid jumping to 'cleanup'.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
When the virDomainCapsDeviceDefValidate() function returned an error
status (-1), we were aborting the function early, but returning the
default return value (0). This patch properly returns an error in that
case.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
The ordering of lock manager locks in the libxl driver has a flaw that was
uncovered by a migration error path. In the perform phase of migration, the
source host calls virDomainLockProcessPause to release the lock before
sending the VM to the destination host. If the send fails an attempt is made
to reacquire the lock with virDomainLockProcessResume, but that too can fail
if the destination host has not finished cleaning up the failed VM and
releasing the lock it acquired when starting to receive the VM.
This change delays calling virDomainLockProcessResume in libxlDomainStart
until the VM is successfully created, but before it is unpaused. A similar
approach is used by the qemu driver, avoiding the need to release the lock
if VM creation fails. In the migration perform phase, releasing the lock
with virDomainLockProcessPause is delayed until the VM is successfully
sent to the destination, which avoids reacquiring the lock if the send
fails.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The virHostGetBootTimeProcfs() function is defined only for Linux
and therefore it's only call should also be done if we're on
Linux.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a helper which converts qemu emulator capabilities to the domain
capability XML. This will simplify future additions of new features.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Declare the capabilities as enum values and store them in an array. This
makes adding new features more straightforward and simplifies the
formatter which now doesn't require changing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the qemu driver currently implements all domain capability
features, we should initialize all features using the helper similarly
to how we do it in drivers which don't support any.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For future extensions of the domain caps it's useful to have a single
point that initializes all capabilities as unsupported by a driver. The
driver then can enable specific ones.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract it to virDomainCapsFormatFeatures so that the main function does
not get so bloated over time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce qemuDomainCapsFeatureFormatSimple which does exactly the same
thing but it's a function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make it more obvious that the function will return NULL if the file is
not executable and stop reusing variables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simplify the final lookup loop by freeing memory automatically and thus
being able to directly return the result.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When parsing allowed authentication methods for the native ssh lib
transports we used strsep. Since we have virStringSplit helper let's use
that one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When we want to know the boot timestamp of the host, we can call
virHostGetBootTime(). Under the hood, it uses getutxid() which is
defined by POSIX and properly check for in configure. However,
musl took a path where it declares the function but instead of
providing any useful implementation it returns NULL meaning "no
record found". If that's the case, use our second best option -
/proc/uptime and a bit of maths.
https://bugzilla.redhat.com/show_bug.cgi?id=1760885
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
With this patch users can cold plug some sound devices.
use "virsh attach-device vm sound.xml --config" command.
Consider the following sound.xml for a domain:
<sound model='ich6'>
<address type='pci' domain='0x0000' bus='0x00' slot='xxx' function='0'/>
</sound>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jidong Xia <xiajidong@cmss.chinamobile.com>
A function virStringParseYesNo was added to convert
string 'yes' to true and 'no' to false, so use this
helper to replace 'STREQ(.*, \"yes\")' and
'STREQ(.*, \"no\")' as it allows us to drop several
repetitive if-then-else string->bool conversion blocks.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
A function virStringParseYesNo was added to convert
string 'yes' to true and 'no' to false, so use this
helper to replace 'STREQ(.*, \"yes\")' and
'STREQ(.*, \"no\")' as it allows us to drop several
repetitive if-then-else string->bool conversion blocks.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
This helper performs a conversion from a "yes|no" string
to a corresponding boolean, and several conversions were
already done, but there are still some omissions.
For most of the remaining usages in domain_conf.c only
"yes" is explicitly checked for. This means all other
values are implicitly handled as 'false'. In this case,
use virStringParseYesNo to handle the conversion and
reserve the original logic of not raise an error, so
ignore the return value of helper.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
The callers don't actually use the returned errno for reporting errors.
Additionally virFileResolveAllLinks returns -1 rather than -errno on
error thus you'd get a spurious EPERM even on other errors.
Don't try to return errno in this case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Return -1 on failure rather than -errno since none of the callers
actually cares about the return value. This specifically fixes returns
of -ENOMEM in cases of bad usage, which would report wrong error
anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The caller doesn't care about the actual return value, so return -1
rather than errno.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The callers don't care about the actual return value, so return -1
rather than errno.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In an effort to remove as much gnulib usage as possible let's
reimplement virFileReadLink. Since it's used in two places only I opted
to open-code it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The inactive external snapshot code replaced the file name in the
virStorageSource but did not touch the backing files. This meant that
after an inactive snapshot the backing chain recorded in the inactive
XML (which is used with -blockdev) would be incorrect.
Fix it by adding a new layer if there is an existing chain and replacing
the virStorageSource struct fully when there is no chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When commiting a different image becomes the disk source. Since we store
the readonly flag per-image we must update it to the same state the
original image had.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current 'setvcpus' timeout message requires a deeper
understanding of QEMU/Libvirt internals to proper react to it.
One who knows how setvcpus unplug work (it is an asynchronous
operation between QEMU and guest that Libvirt can't know for
sure if it failed, unless an explicit error happened during the
timeout period) will read the message and not assume a failed
operation. But the regular user, most often than not, will read
it and believe that the unplug operation failed.
This leads to situations where the user isn't exactly relieved
when accessing the guest and seeing that the unplug operation
worked. Instead, the user feel mislead by the timeout message
setvcpus threw.
Changing the timeout message to let the user know that the
unplug status is not known, and manual inspection in the guest
is required, is not a silver bullet. But it gives a more
realistic expectation of what happened, as best as we can tell
from Libvirt side anyways.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemu_hotplugpriv.h is a header file created to share a global variable
called 'qemuDomainRemoveDeviceWaitTime', declared in qemu_hotplug.c,
to other files that would want to change the timeout value
(currently, only tests/qemuhotplugtest.c).
Previous patch deprecated the variable, using qemu_driver->unplugTimeout
to set the timeout instead. This means that the header file is now
unused, and can be safely discarded.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For some architectures and setups, device removal can take
longer than the default 5 seconds. This results in commands
such as 'virsh setvcpus' to fire timeout messages even if
the operation were successful in the guest, confusing the
user.
This patch sets a new 10 seconds unplug timeout for PPC64
guests. All other archs will keep the default 5 seconds
timeout.
Instead of putting 'if PPC64' conditionals inside qemu_hotplug.c
to set the new timeout value, a new function called
qemuDomainGetUnplugTimeout was added. The timeout value is then
retrieved when needed, by passing the correspondent DomainDef
object. This approach allows for different guest architectures
to have distint unplug timeout intervals, regardless of the
host architecture. This design also makes it easier to
modify/enhance the unplug timeout logic in the future
(allow for special timeouts for TCG domains, for example).
A new mock file was created to work with qemuhotplugtest.c,
given that the test timeout is significantly shorter than
the actual timeout value in qemu_hotplug.c.
The now unused 'qemuDomainRemoveDeviceWaitTime' global can't
be simply erased from qemu_hotplug.c though. Next patch will
remove it properly.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In preparation for some other improvements, switch to using glib
allocation and g_autofree when parsing the 'acceleration' and
'resolution' properties of the video device.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Just above in the function, we return from the function if either x or y
are NULL, so there's no need to re-check whether x or y are NULL.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
The video resolution support that was introduced in
7286279797 is specified as a <resolution>
sub-element of <model>, not optional attributes of model.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Commit 72862797 introduced resolution settings for QEMU video drivers.
It includes a new structure inside video definition. So, the code needs
to clear pointer allocation for that structure into clear function
virDomainVideoDefClear(). This commit adds this missing VIR_FREE().
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Use g_strndup in all the cases where we check upfront whether a pointer
is non-NULL and then use it to calculate the copied length.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Replace all the usage of
VIR_STRNDUP(dest, b, p ? p - b : -1)
with separate calls to g_strndup/g_strdup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Promote usage of separate buffers for separate formatting passes by
removing the now unused virBufferSetChildIndent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new helper to initialize child XML element buffers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new helper to initialize child XML element buffers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new helper to initialize child XML element buffers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new helper to initialize child XML element buffers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new helper to initialize child XML element buffers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new macro which initializes a virBuffer on the stack and also sets
the indent level to be used for child XML element formatting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the need to pass around strings and switch to the enum values
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capabilities are declared in the XML schema so passing feature names
as strings from hypervisor drivers makes no sense.
Additionally some of the features expose so called 'toggles' while
others not. This knowledge was encoded by a bunch of 'STREQ's in the
formatter.
Change all of this by declaring the features as an enum and use it
instead of a dynamically allocated array.
Presence of 'toggles' is encoded together with the conversion strings
rather than in the formatter directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The libxl driver exposes a 'hap' feature in the capability XML but our
schema didn't cover it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The pconfig feature was enabled in QEMU by accident in 3.1.0. All other
newer versions do not support it and it was removed from the
Icelake-Server CPU model in QEMU.
We don't normally change our CPU models even when QEMU does so to avoid
breaking migrations between different versions of libvirt. But we can
safely do so in this specific case. QEMU never supported enabling
pconfig so any domain which was able to start has pconfig disabled.
With a small compatibility hack which explicitly disables pconfig when
CPU model equals Icelake-Server in migratable domain definition, only
one migration scenario stays broken (and there's nothing we can do about
it): from any host to a host with libvirt < 5.10.0 and QEMU > 3.1.0.
https://bugzilla.redhat.com/show_bug.cgi?id=1749672
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU does not support setting this feature on the command line anymore.
We don't need to explain why it is not included in CPU models then.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When a CPU definition wants to explicitly disable some features that are
unknown to QEMU, we can safely drop them from the definition before
starting QEMU. Naturally QEMU won't enable such features implicitly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
qemuMonitorJSONBlockIoThrottleInfo uses a macro called
GET_THROTTLE_STATS that's defined outside of the function,
which references a 'cleanup' label. GET_THROTTLE_STATS is
only used inside qemuMonitorJSONBlockIoThrottleInfo (in fact,
the macro is undef right after it) thus it is safe to erase
the 'cleanup' reference inside the macro, then proceed
with the usual cleanup label removal inside
qemuMonitorJSONBlockIoThrottleInfo.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When attaching a mediated host device of model vfio-ccw without
specifying a guest-address, none is generated by libvirt. Let's fix this
and make sure to generate a device address during live-hotplug.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we are not passing the @fakerootdir variable to any inline function
anymore, we can make the variable static.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that function is no longer used, it can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that function is no longer used, it can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In my previous commit of v5.9.0-83-g4ae7181376 I've fixed
check-aclrules but whilst doing so, I forgot to wrap long
lines that I've added.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Macro _vpath_builddir is not defined so we have to define it ourselves.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Previously we generated all source files into $srcdir which is no
longer true. This means that we can't just blindly prepend each
source file with $srcdir.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Previously we generated all source files into $srcdir which is no
longer true. This means that we can't just blindly prepend each
source file with $srcdir.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use virXMLFormatElement and the automatic memory handlers to simplfy the
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use automatic memory freeing and use virXMLFormatElement instead of open
coding it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The enum name sounds too generic. It in fact describes the capabilities
of the process, thus add 'Process' to the name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code formatting storage capabilities faithfully copied the wrong use
of 'const' from domain capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
'virBlahPtr const blah' results into modification to the value of 'blah'
triggering compilation error rather than the modification of the virBlah
struct the pointer points to.
All of the domain capability formatting code was broken in this regard.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most of them don't have anything to report so we can simplify the logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Separate the blockdev code since it makes the original function lengthy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
The qemu driver has an internal implementation for converting disk bus
to string for use with qemu. This should not be used in error messages
though as we want to report the string based on the XML value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
The comment was copied form the domain and the object type was not
changed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are two ways for specifying loader:nvram pairs:
1) --with-loader-nvram configure option
2) nvram variable in qemu.conf
Since we have FW descriptors, using this old style is
discouraged, but not as strong as one would expect. Produce more
warnings:
1) produce a warning if somebody tries the configure option
2) produce a warning if somebody sets nvram variable and at
least on FW descriptor was found
The reason for producing warning in case 1) is that package
maintainers, who set the configure option in the first place
should start moving towards FW descriptors and abandon the
configure option. After all, the warning is printed into config
output only in this case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1763477
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit d19c21429f modified the condition so that it checks whether the
value is more than 0xFFFFFFFF. Since addr->domain is an unsigned int, it
will never be more than that.
Remove the whole check
src/util/virpci.c:1291:22: error: result of comparison 'unsigned int' > 4294967295 is always false [-Werror,-Wtautological-type-limit-compare]
if (addr->domain > 0xFFFFFFFF) {
~~~~~~~~~~~~ ^ ~~~~~~~~~~
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since 6a077cf2b3 domaincapstest does not run through all cases on
failure but terminates right away. This makes it super annoying to debug
or use in combination with VIR_TEST_REGENERATE_OUTPUT.
Fix it by remembering failure and still running through all cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When RUNSTATEDIR was introduced
commit d29c917ef4
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Aug 20 16:05:12 2019 +0100
src: honour the RUNSTATEDIR variable in all code
The makefile rules for man pages were accidentally not updated for the
new variablle name.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Simplify the list of ignored warnings now that we only have two left,
and document why we're not honouring them.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Line continuations should be 4 space indented unless a previous opening
brace required different alignment.
docs/apibuild.py:2014:24: E126 continuation line over-indented for hanging indent
token[0], token[1]))
^
docs/apibuild.py:74:3: E121 continuation line under-indented for hanging indent
"ATTRIBUTE_UNUSED": (0, "macro keyword"),
^
...more...
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There should be a single space either side of operators. Inline
comments should have two spaces before the '#'
src/hyperv/hyperv_wmi_generator.py:130:45: E261 at least two spaces before inline comment
source += ' { "", "", 0 },\n' # null terminated
^
src/esx/esx_vi_generator.py:417:25: E221 multiple spaces before operator
FEATURE__DESERIALIZE = (1 << 6)
^
tests/cputestdata/cpu-cpuid.py:187:78: E225 missing whitespace around operator
f.write(" <msr index='0x%x' edx='0x%08x' eax='0x%08x'/>\n" %(
^
docs/apibuild.py:524:47: E226 missing whitespace around arithmetic operator
self.line = line[i+2:]
^
...more...
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Coding style expects 1 blank line between each method and 2 blank lines
before each class.
docs/apibuild.py:171:5: E303 too many blank lines (2)
def set_header(self, header):
^
docs/apibuild.py:230:1: E302 expected 2 blank lines, found 1
class index:
^
docs/apibuild.py:175:5: E301 expected 1 blank line, found 0
def set_module(self, module):
^
...more...
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Exception catching statements should always match on a class name, the
most specific one possible. Rather than analyse the code to look at what
the most specific one is, this just uses the base Exception class.
docs/apibuild.py:255:9: E722 do not use bare 'except'
except:
^
docs/apibuild.py:279:9: E722 do not use bare 'except'
except:
^
...more...
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Python code style recommends avoiding a variable named 'l' as it is
visually similar to '1'.
docs/apibuild.py:482:13: E741 ambiguous variable name 'l'
l = len(line)
^
docs/apibuild.py:503:21: E741 ambiguous variable name 'l'
l = len(line)
^
...more...
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When writing regexes special regex matches like "\d" can get
misinterpreted as normal string escape sequences:
docs/apibuild.py:1359:51: W605 invalid escape sequence '\d'
value = value + re.sub("^(\d+)U$", "\\1", token[1])
^
docs/apibuild.py:2134:31: W605 invalid escape sequence '\('
m = re.match("\(?1<<(\d+)\)?", info[0])
^
docs/apibuild.py:2134:38: W605 invalid escape sequence '\d'
m = re.match("\(?1<<(\d+)\)?", info[0])
^
docs/apibuild.py:2134:42: W605 invalid escape sequence '\)'
m = re.match("\(?1<<(\d+)\)?", info[0])
^
To avoid this probem all regexes should use the r"...." syntax for their
strings, which disables normal string escape sequences.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current flake8 check only looks at one item (semicolons at end of
line). This means that our code quality will continue to get worse,
violating an increasing number of checks.
Switching to a whitelist means that we freeze the badness at its
current level & can incrementally fix things up.
We are excluding the following...
Indentation:
E114 indentation is not a multiple of four (comment)
E115 expected an indented block (comment)
E116 unexpected indentation (comment)
E121 continuation line under-indented for hanging indent
E125 continuation line with same indent as next logical line
E126 continuation line over-indented for hanging indent
E127 continuation line over-indented for visual indent
E128 continuation line under-indented for visual indent
E129 visually indented line with same indent as next logical line
E131 continuation line unaligned for hanging indent
Whitespace:
E211 whitespace before ‘(‘
E221 multiple spaces before operator
E222 multiple spaces after operator
E225 missing whitespace around operator
E226 missing whitespace around arithmetic operator
E231 missing whitespace after ‘,’, ‘;’, or ‘:’
E261 at least two spaces before inline comment
Blank lines
E301 expected 1 blank line, found 0
E302 expected 2 blank lines, found 0
E303 too many blank lines (3)
E305 expected 2 blank lines after end of function or class
Line length
E501 line too long (82 > 79 characters)
Statements
E722 do not use bare except, specify exception instead
E741 do not use variables named ‘l’, ‘O’, or ‘I’
Errors:
F821 undefined name 'name'
Warnings:
W504 line break after binary operator
W605 invalid escape sequence ‘x’
Later commits will enable most of these exclusions.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In commit 0985a9597b we stopped
distributing generated source file. This is done by prepending
binary_SOURCES variable with "nodist_". However, there is a typo
- the prefix is "nodst_" instead of "nodist_".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit <b98f90cf913965243c6e2c49a52aa170a48093ef> forgot to update
bhyve and vz Makefile files as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This affects more than src/Makefile.am as the rule to generate source
files for protocols is generic for all sub-directories.
Affected files are:
src/admin/admin_protocol.{h,c}
src/locking/lock_protocol.{h,c}
src/logging/log_protocol.{h,c}
src/lxc/lxc_monitor_protocol.{h,c}
src/remote/{lxc,qemu,remote}_protocol.{h,c}
src/rpc/{virkeepalive,virnet}protocol.{h,c}
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our naming was not consistent. Use the protocol name as prefix for all
generated files.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There was no need to handle files for translation from build directory
but that will change with following patches where we will stop
generating source files into source directory.
In order to have them included for translation we have to prefix each
file with SRCDIR or BUILDDIR.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Historically we did not support VPATH builds and everything was
generated into source directory. The introduction of VPATH builds
did not changed the way how our translation files are handled.
This patch changes the rules to generate everything into build
directory and stops distributing generated files in order to have
properly separated VPATH builds.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Move generated_files variable closer to the sc_po_check rule and
remove non-existent gnulib internal path.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce new rule 'generated-sources' as a helper for PO files check
to make sure that all generated files are prepared and to not duplicate
the list on different places. This will be used as a dependency for
sc_po_check rule instead of duplicated list of generated files.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit <22d8e27ccd5faf48ee2bf288a1b9059aa7ffd28b> introduced our
syntax-check.mk file based on gnulib rules. However, the rule was
completely ignored as we don't have POTFILES.in file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we forbid builds in source directory we can remove a lot of
ignores that are created during build time. To make the cleanup easier
in the future create a sections in our .gitignore file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Historically we've allowed builds in the main src dir, but meson does
not support this. Explicitly force separate build dir in autotools to
align with meson. We must re-enable dependency tracking which the RPM
%configure macro turns off. Without this, the build dir doesn't get
the source directory tree mirrored.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The qemuDomainGetStatsIOThread() accesses the monitor by calling
qemuDomainGetIOThreadsMon(). And it's also marked as "need
monitor" in qemuDomainGetStatsWorkers[]. However, it's not
checking if acquiring job was successful.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The qemuDomainObjEnterMonitor() should not be called without a
job set. Catch this error and produce a warning message if such
call occurred.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Libvirtd has set SIGPIPE to ignored, and virFork resets all signal
handlers to the defaults. But child process may write logs to
stderr/stdout, that may generate SIGPIPE if journald has stopped.
So set SIGPIPE to a dummy no-op handler before unmask signals in
virFork(), and the handler will get reset to SIG_DFL when execve()
runs. Now we can delete sigaction() call entirely in virExec().
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
When libvirt first implemented a stable and configurable MAC address
for the bridges created for libvirt virtual networks (commit
5754dbd56d, in libvirt v0.8.8) most distro stable releases didn't
support explicitly setting the MAC address of a bridge; the bridge
just always assumed the lowest numbered MAC of all attached
interfaces. Because of this, we stabilized the bridge MAC address by
creating a "dummy" tap interface with a MAC address guaranteed to be
lower than any of the guest tap devices' MACs (which all started with
0xFE, so it's not difficult to do) and attached it to the bridge -
this was the inception of the "virbr0-nic" device that has confused so
many people over the years.
Even though the linux kernel had recently gained support for
explicitly setting a bridge MAC, we deemed it unnecessary to set the
MAC that way, because the other (indirect) method worked everywhere.
But recently there have been reports that the bridge MAC address was
not following the setting in the network config, and mismatched the
MAC of the dummy tap device (which was still correct). It turns out
that this is due to a change in systemd-242 that persists whatever MAC
address is set for a bridge when it's initially started. According to
the systemd NEWS file entry for version 242
(https://github.com/systemd/systemd/blob/master/NEWS):
"if a bridge interface is created without any slaves, and gains
a slave later, then now the bridge does not inherit slave's MAC."
This change was the result of:
https://github.com/systemd/systemd/issues/3374
(apparently if there is no MAC saved for a bridge by the name of a
bridge being created, the random MAC generated during creation is
saved, and then that same MAC is used to explicitly set the MAC each
time it is created). Once a bridge has an explicitly set MAC, the "use
the lowest numbered MAC of attached devices" rule is ignored, so our
dummy tap device is like the goggles - it does nothing! (well, almost).
We could whine about changes in default behavior, etc. etc., but
because the change was in response to actual user problems, that seems
likely a fruitless task. Fortunately, time has marched on, and even
distro releases that are old enough that they are no longer supported
by upstream libvirt (e.g. RHEL6) have support for explicitly setting a
bridge device MAC address, either during creation or with a separate
ioctl after creation, so we can now do that.
To enable explicitly setting the mac during bridge creation, we add a
mac arg to virNetDevBridgeCreate(). In the case of platforms where
the bridge is created with a netlink RTM_NEWLINK message, we just add
that mac to the message. For platforms that still use an ioctl (either
SIOCBRADDBR or SIOCIFCREATE2), we make a separate call to
virNetDevSetMAC() after creating the bridge.
(NB: I was unable to test the calling of virNetDevSetMAC() from the
SIOCIFCREATE2 (BSD) version of virNetDevBridgeCreate(); even though I
managed to get a FreeBSD system setup and libvirt built there, when I
tried to start the default network the SIOCIFCREATE2 ioctl itself
failed, so it never even got to the virNetDevSetMAC(). That leaves the
FreeBSD implementation untested.)
This makes the dummy tap pointless for purposes of setting the MAC
address, but it is still useful for IPv6 DAD initialization (which
apparently requires at least one interface to be attached to the
bridge and online), as well as for setting an initial MTU for the
bridge, so it hasn't been removed.
(NB: we can safely *always* call virNetDevBridgeCreate() with
&def->mac from the network driver because, in spite of the existence
of a "mac_specified" bool in the config suggesting that it may not
always be present, in reality a mac address will always be added to
any network that doesn't have one - this is guaranteed in all cases by
commit a47ae7c004)
https://bugzilla.redhat.com/show_bug.cgi?id=1760851
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Although until now, any use of the extra_args argument (a pointer to a
struct containing extra attributes to add the the RTM_NEWLINK message)
would always have the ifindex and mac set, so the code could assume it
was safe to add both to the message if extra_args != NULL. There is
now a use for setting a MAC address in the RTM_NEWLINK without setting
the ifindex, so we should check each of these separately.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The file was introduced in be03587a34, but it was not added
to $(cpumap_DATA) at the time and so it didn't show up in the
distribution archive.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Commit 01ca4010d8 (libvirt v5.1.0) moved address reservation for
hotplugged interface devices up to an earlier point in
qemuDomainAttachNetDevice(), because that function calls
qemuDomainSupportsNicdev() (in the case of
VIR_DOMAIN_NET_TYPE_VHOSTUSER), and qemuDomainSupportsNicdev() needs
to know the address type (for ARM machinetypes) and returns incorrect
results when the address type is "none".
This bugfix unfortunately caused a regression, because it also made PCI
address reservation happen before we noticed that the device was a
*hostdev* interface. Those interfaces are hotplugged by just calling
out to qemuDomainAttachHostdevDevice() - that function would then also
attempt to reserve the *same PCI address* that had just been reserved
in qemuDomainAttachNetDevice().
The solution is to move the bit of code that short-circuits out to
virDomainHostdevAttach() up *even earlier* so that no PCI address has
been allocated by the time it's called.
https://bugzilla.redhat.com/show_bug.cgi?id=1744523
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This introduces semantic validation for SVE-related features,
preventing the user from combining them in invalid ways; it also
automatically enables overall SVE support if any SVE vector
length has been enabled by the user to make sure QEMU behaves
correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now we only perform very basic validation, such as making sure
that the user is not trying to enable/disable unknown CPU features
and the like.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The only feature we care about for the moment is SVE, which can
be controlled both with a coarse granularity by turning it on/off
completely and with a finer granularity by enabling/disabling
individual vector lengths.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The ARM implementation of query-cpu-model-expansion only
supports full expansion, so we have to make sure we're using
that expansion mode if we want to obtain any useful data.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
CPU features are available on ARM only wherever the
query-cpu-model-expansion QMP command is available, same as
on s390. Update qemuBuildCpuModelArgStr() to reflect this
fact.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We're going to use it on non-x86 soon, so it needs a more
generic name: virQEMUCapsObjectPropsMaxCPU.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately this results in a lot of churn because of the eigth
hundred and change QEMU commits since the file was last touched,
but the only part we actually care about is the fact that the
query-cpu-model-expansion QMP command is now available on aarch64.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's possible that virBitmapNewString returns NULL with an error
string (and not an allocation failure that would abort); however, if
virBitmapToString is called with a NULL @bitmap, then it will fail
in an ugly manner. So rather than have if (!map && !str) logic, split
the checks for each variable.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 1c8113f9c added the call to virTypedParamsGetString without
a return value check which caused Coverity to complain especially
since other checks for the same function are made.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 075523438 added a direct reference to @cookie even though
it may be NULL as shown by a comment a few lines previous - so add
the check here as well.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The @ifname is listed as an ATTRIBUTE_NONNULL(1) parameter, so
checking for _NULLABLE causes a coverity build failure - remove
that and if it's NULL for the test let's fail miserably.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 66e2adb2ba moved the code and the coverity comment which now
was useless since the context was in lxcContainerSetupPivotRoot.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 944a35d7f0 added @fakerootdir; however, there are multiple
paths out of mymain that didn't free the memory - so just use the
g_autofree to resolve the potential leak.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 17561eb36 modified the logic to check "if (!event)" for an
attribute that was not supposed to be passed as NULL. This causes
the static checker/Coverity build to fail. Since the check is made,
alter the header.
Also add an error message since returning -1 without some sort of
error message as previously would have happened with the failed
VIR_STRDUP so that the eventual error doesn't get the default
for some reason message.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The @valueTypeUtf8 references need to use the STREQ_NULLABLE since
they're variantly filled in by @valueTypeUtf16.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A few new companies and individuals contributed to libvirt since
the last time the gitdm configuration was updated.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
The "Security" section has been used in the past, so we're only
documenting existing behavior; the "Packaging changes" will be
used in the next commit, as well as in future releases when we
make more changes that are relevant to packagers, such as the
switch to Meson.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Xen support for specifying ACPI firmware path was introduced in the
5.9.0 dev cycle, not 5.8.0 as currently indicated by the docs.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we don't have to deal with errors of virBuffer we can also make
this function void.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that there are no errors reported and tracked in virBuffer, remove
all the internals which were used to track them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
GString is surprisingly similar to what libvirt was doing painstakingly
manually. Yet it doesn't support the automatic indentation features we
use for XML so we rather keep those in form of virBuffer using GString
internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
rfc3986 uses uppercase characters so switch to using them as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
According to rfc3986:
2.3. Unreserved Characters
Characters that are allowed in a URI but do not have a reserved
purpose are called unreserved. These include uppercase and lowercase
letters, decimal digits, hyphen, period, underscore, and tilde.
unreserved = ALPHA / DIGIT / "-" / "." / "_" / "~"
URIs that differ in the replacement of an unreserved character with
its corresponding percent-encoded US-ASCII octet are equivalent: they
identify the same resource. However, URI comparison implementations
do not always perform normalization prior to comparison (see Section
6). For consistency, percent-encoded octets in the ranges of ALPHA
(%41-%5A and %61-%7A), DIGIT (%30-%39), hyphen (%2D), period (%2E),
underscore (%5F), or tilde (%7E) should not be created by URI
producers and, when found in a URI, should be decoded to their
corresponding unreserved characters by URI normalizers.
Thus we must not include few other characters which don't match
c_isalpha to conform to the rules.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the conversion of all callers that would pass true as @dynamic to
a different function we can remove the unused argument now.
Additionally modify the return type to 'size_t' as indentation can't be
negative and remove checks whether @buf is passed as it's caller's duty
to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It basically implements almost the same thing, so we can replace it with
existing helpers with a few tweaks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function basically does two very distinct things depending on a
bool. As a first step of conversion split out the case when @dynamic is
true and implement it as a new function and convert all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The DO_TEST macro initializes 'struct testInfo' but it's not used by any
of the tests. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The tests are deeply based on internals of virBuffer which will be
replaced in an upcoming patch with glib's GString. Remove the tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than setting usage error truncate the indentation level. Having
the output string misformated is way more useful to figure out where the
error lies rather than reporting an error after a giant formatter
function.
In testBufAutoIndent we now validate that the indentation is truncated
and testBufAddBuffer2 is removed since it became bogus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Usage errors in the virBuffer are hard to track anyways. Just trim
noting if the user requests the trimming string to be used without
providing it.
The change in the test proves that it's a no-op now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace combinations of xalloc_oversized and VIR_ALLOC_N_QUIET by using
g_malloc0_n which does the checking internally.
This conversion is done with a semantic difference and slightly higher
memory requirements as I've opted to allocate one chunk more than
necessary rather than trying to accomodate the NUL byte separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Spare a few more lines rather than having a condition with a nested
ternary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move calls to virTypedParamsSerialize earlier in the event dispatch
functions so that we don't have to call 'xdr_free' afterwards.
This is possible as virTypedParamsSerialize cleans up after itself if it
fails.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Few events emit optional strings. We need to allocate the container for
it first. Note that remote_nonnull_string is used as the type as the
internal part of the string is nonnull if the container is present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Allocate the array of graphics identity objects using g_new0 to allow
dropping the 'error' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
After conversion to g_strdup, the helpers now always return success.
Remove the return value to simplify the callers.
Note that many occurrences of these is in the code generated by
gendispatch.pl. Since gendispatch aggregates many cases together an
incremental conversion would require more invasive changes to
gendispatch for the time of conversion which doesn't make sense.
Also in many cases the helper was the last place where the 'error:'
label was used and thus also those conversions must be included in this
patch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Use only one switch case selecting job type and decide what's successful
outcome on a case-by-case basis.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce qemuMonitorTransactionBitmapMergeSourceAddBitmap which adds
the appropriate entry into a virJSONValue array to be used with
qemuMonitorTransactionBitmapMerge. Bitmap merging supports two possible
formats and this new helper implements the more universal one specifying
also the source node name.
In addition use the new helper in the testQemuMonitorJSONTransaction
test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the linking and saving bits of checkpoint creation into
qemuCheckpointCreateFinalize so that qemuCheckpointCreateXML is a bit
simpler and also makes it reusable in the backup code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate out individual steps of creating a checkpoint from
qemuCheckpointCreateXML into separate functions. This makes the function
more readable and understandable and also some of the new functions will
be reusable when we will be creating a checkpoint along with a backup
in the upcoming patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prevent insane configurations by enforcing that disk bitmap for a
checkpoint must match the name of the checkpoint.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we are updating the current checkpoint when redefining by mentioning
the current checkpoint as a parent of the newly redefined one we don't
have to clear it first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no point in clearing the current checkpoint when we are just
changing the definition of the current checkpoint as by the virtue of the
'update_current' flag the same checkpoint would become current in
qemuCheckpointCreateXML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'other' variable was used to store the parent of the redefined
checkpoint and then the existing version of the currently redefined
checkpoint. Make it less confusing by adding a 'parent' variable for the
first case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no point in clearing the current snapshot when we are just
changing the definition of the current snapshot as by the virtue of the
'update_current' flag the same snapshot would become current in
qemuDomainSnapshotCreateXML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the only data we need for fully testing a QEMU binary is
the (version, arch) combo, we can stop providing that information
ourselves and instead rely on testQemuCapsIterate() automatically
picking up new input files as they are added to the repository,
the same way the qemucapabilities and qemucaps2xml tests already
behave.
Unsurprisingly, this change results in a bunch of extra output
files being created, significantly expanding our test coverage.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
For each QEMU version there are usually several different,
architecture-dependedn scenarios that we're interested in testing;
however, since the test matrix has to be explicitly created by
calling DO_TEST_QEMU() multiple times with different arguments, we
end up with spotty coverage.
Fix this by implementing the arch-specific rules in code, which
result in the full coverage for a (version, arch) combo being
automatically achieved with a single call to DO_TEST_QEMU().
Unsurprisingly, this change results in a bunch of extra output
files being created.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The full name of the test case, as well as the name of the QEMU
binary and corresponding capabilities file, can all be derived
from other information passed to the test, so there's no point in
asking the user to provide them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Macros become less and less appealing the more work you perform
inside them: DO_TEST_QEMU() has arguably already crossed that
threshold, and we're going to add even more code later on.
While factoring the code out of the macro, convert it to use the
GLib string manipulation functions and take advantage of autofree.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Requiring the user to provide the final string themselves will
make subsequent changes easier to implement.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The usual convention is to use ${foo}test.c for the test program
itself and either ${foo}data/ or ${foo}outdata/, depending on
whether it contains both input and output files or only the latter,
for the corresponding data directory.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Right now we're passing a "base" string that contains both,
separated by an underscore. Some changes that we're going to
introduce later will require us to have the version number on its
own, and instead of delegating the task of splitting the two apart
to the callback it make more sense to perform it upfront.
This change results in quite a bit of churn because we're now
using the version number only, without the prefix, to calculate
the dummy microcodeVersion.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Right now users need to hardcode the suffix, which is not a big
deal since they're the ones who passed it to testQemuCapsIterate()
in the first place; however, since we're already passing most of
the information to the callback and we're going to add more later
on, it makes sense to be consistent and pass the suffix too.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Right now users need to know input file live inside
TEST_QEMU_CAPS_PATH, which is bad layering.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We're going to depend on the fact that the suffix starts with a
dot later on, so we better ensure that it does.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
If files whose name doesn't follow the expected format are added
to the repository, it's better to make the test suite fail than to
silently ignore them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Libtool gets a wrong order of arguments of libraries to install and it
fails when installing libvirt-admin.so that libvirt.so is not yet
installed. Caused by commit <3097282d8668693eb4b7c3fb1b4fe5b474996b9c>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In few places we have the following code pattern:
int ret;
... /* @ret is not accessed here */
ret = f(...);
return ret;
This pattern can be written less verbose:
...
return f(...);
This patch was generated with following coccinelle spatch:
@@
type T;
constant C;
expression f;
identifier ret;
@@
-T ret = C;
... when != ret
-ret = f;
-return ret;
+return f;
Afterwards I needed to fix a few places, e.g. comment in
virDomainNetIPParseXML() was removed too because coccinelle
thinks it refers to @ret while in fact it doesn't. Also in few
places it replaced @ret declaration with a few spaces instead of
removing the line. But nothing terribly wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In v5.8.0-332-g3097282d86 the libvirt-admin.so was moved into
src/admin/ directory. However, corresponding .gitignore change
was left out.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These two functions have pattern that's preventing us from
simpler virAsprintf() -> g_strdup_printf() transition. Modify
their logic a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a few places our code relies on the fact that virAsprintf()
not only prints to allocated string but also that it returns the
length of that string. Fortunately, only few such places were
identified:
https://www.redhat.com/archives/libvir-list/2019-September/msg01382.html
In case of virNWFilterSnoopLeaseFileWrite() and virFilePrintf()
we can use strlen() right after virAsprintf() to calculate the
length. In case of virDoubleToStr() it's only caller checks for
error case only, so we can limit the set of returned values to
just [-1, 0].
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically we did not support VPATH builds and everything was
generated into source directory. The introduction of VPATH builds did
not changed the way how our documentation is handled.
This patch changes the rules to generate everything into build
directory and stops distributing generated files in order to have
properly separated VPATH builds.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is no need to keep old compatibility code around as it it will
never be used in our current source tree.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit <124f06534c65618b1eeeee07bb26182ab8e30119> moved remote related
build rules into separate makefile but forgot to move this part as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is no need to have the libvirt-admin.so library definition in the
src directory. In addition the library uses directly code from admin
sub-directory so move the remaining bits there as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Follow the same pattern as for other sub-directories where we create a
static library that is linked into libvirt.so.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Follow the same pattern as for other sub-directories where we create a
static library that is linked into libvirt.so.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All OSes that we support have libselinux >= 2.5 except for Ubuntu 16.04
where the version is 2.4.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This version is available on all supported OSes and includes the
transaction APIs.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported OSes have libnl-3.0 and netcf uses it so there is no need
to keep libnl-1.0 compatibility code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In domain_conf.c we have virDomainSCSIDriveAddressIsUsed()
function which returns true or false if given drive address is
already in use for given domain config or not. However, it also
takes a shortcut and returns true (meaning address in use) if the
unit number equals 7. This is because for some controllers this
is reserved address. The limitation comes mostly from vmware and
applies to lsilogic, buslogic, spapr-vscsi and vmpvscsi models.
On the other hand, we were not checking for the maximum unit
number (aka LUN number) which is also relevant and differs from
model to model.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
So far, the virDomainDeviceFindSCSIController() takes
virDomainDeviceInfo structure which is an overkill. It assumes
that the passed structure is type of
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_DRIVE which is not obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Include the 'semi-automatic' updates in the list of patches pushed
at maintainers' discretion to match current practice.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Replace reference to VIR_FREE with g_free and mention the use
of g_auto cleanup attributes that eliminate most of label use.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Prefer G_GNUC_PRINTF.
Also, pick another example than virAsprintf since it may get
removed in the future.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Recommend GString for generic strings and virBuffer for strings
that need helpers for other uses, like XML or command line
formatting.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Document the preferred alternatives to existing libvirt macros for
allocating strings. These cannot be deleted just yet because
converting them will require a lot of work.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Document the preferred alternatives to existing libvirt macros for
memory allocation. These cannot be deleted just yet because
converting them will require a lot of work.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Mention all the __attribute__ annotations we use to make the compiler
and/or the static analysis tools understand the code better.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Mention the various ATTRIBUTE* macros and ARRAY_CARDINALITY
that were removed earlier.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Mention a more complex example.
Invoke the test without 'make' since the mentioned example
does not seem to be working anymore.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Our HACKING file is clear about requiring submission from a git
checkout, which automatically enables -Werror.
Remove the mentions of explicitly enabling it to alleviate
the collective cognitive encumbrance.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Namely:
* holding up the first-time patch submissions for moderation,
which might cause first-time submitters to question the process
* not CC-ing individual developers
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This tool takes care of many of the tedious parts of submitting
a patch. Mention it first, above the "manual" way using
git send-email.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It has been enabled by default for over three years now:
commit 5d2a30d7d8777319c745804f040fa405d02169ce
Author: Junio C Hamano <gitster@pobox.com>
CommitDate: 2016-04-03 10:29:22 -0700
Merge branch 'mm/diff-renames-default'
5d2a30d7d8
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This simplifies some functions, but mostly
libxlDomainManagedSavePath() which is going to be modified in
future commits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
= and == are both operators to test for string equality in bash,
but only = is required by POSIX.
Signed-off-by: Maya Rashish <coypu@sdf.org>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There's unused 'error' label left after transition from
VIR_STRDUP() to g_strdup (v5.8.0-255-g652cdbe364).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Calling the monitor was convenient for the implementation in
qemuDomainBlockCopyCommon, but causes the snapshot code to call
query-named-block-nodes for every disk.
Fix this by removing the monitor call from
qemuBlockStorageSourceCreateDetectSize so that the data can be reused in
loops.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Retrieve data for individual block nodes in a hash table. Currently only
capacity and allocation data is extracted but this will be extended in
the future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Add a helper that checks whether an entry with given name exists but
does not touch the userdata.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Add a simpler constructor for hash tables which specifically does not
require specifying the initial hash size and uses simpler freeing
function.
The initial hash table size usually is not important as the hash table
is growing when it reaches certain number of entries in one bucket.
Additionally many callers pass in a random small number for ad-hoc table
use so using a central one will simplify things.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Introduce a new type virHashDataFreeSimple which has only a void * as
argument for cases when knowing the name of the entry when freeing the
hash entry is not required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
In many cases we used virDomainDiskByName to solely look up disk by
target. We have a new helper now so we can replace it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Previous commit removed last use of this function so we can get rid of
it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In both replaced cases we have other code that verifies that the bus
can't be changed or that the target is unique, so limiting the search to
disks with same bus makes no sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce a simpler replacement for virDomainDiskByName when looking up
by disk target.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In some cases we want to prepare a @src which is not meant to belong to
a disk and thus does not require us to copy the data. Allow passing in
NULL @disk into qemuDomainPrepareDiskSourceData.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Note in the comment that this function prepares the storage source based
on the configuration of the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The function does not do anything that could fail. Remove the return
value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemuDomainPrepareDiskSourceData historically prepared everything but
we've split out the majority of the functionality so that it sets up
predominately only according to the configuration of the disk. There
was one leftover bit of setting the gluster debug level from the config.
Split this out into a separate function so that
qemuDomainPrepareDiskSourceData only prepares based on the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
ACKed-by: Eric Blake <eblake@redhat.com>
We don't allow such config in the schema but the code can handle that so
add a test case supporting it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The disk type is not part of source and thus it's parsed earlier. This
bypasses the checks when parsing a disk type='network' if it's
completely missing the source.
Since there are possible active users of this (it was reported as a
problem with openstack) fix it by resetting the disk type to '_FILE' for
an empty cdrom which is handled correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The @freeTmpPath boolean is used to determine if @tmpPath holds
an allocated memory or is a pointer to a constant string and
therefore if it needs to be freed or not when returning from the
function. Well, we can unify the way we set @tmpPath so that it
always holds an allocated memory and thus always must be freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There are three cases where vir*DeviceGetPath() returns a const
string. In these cases, the string is initialized in
corresponding vir*DeviceNew() calls which fail if string couldn't
be allocated. There's no point in checking the second time if the
string is NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Since its introduction in v1.0.5-rc1-19-g6e13860cb4 the
qemuTeardownHostdevCgroup() does nothing unless the passed
hostdev is a PCI device with VFIO backend. This seems
unnecessary.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There are two types of host devices that require /dev/vfio/vfio
access:
1) PCI devices with VFIO backend
2) Mediated devices
Introduce a simple helper that returns true if passed @hostdev
falls in either of the categories.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In some places we need to check if a hostdev has VFIO backend.
Because of how complicated virDomainHostdevDef structure is, the
check consists of three lines. Move them to a function and
replace all checks with the function call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
These functions do not change any of the passed hostdevs. They
just read them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace:
if (!s && VIR_STRDUP(s, str) < 0)
goto;
with:
if (!s)
s = g_strdup(str);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All the callers of these functions only check for a negative
return value.
However, virNetDevOpenvswitchGetVhostuserIfname is documented
as returning 1 for openvswitch interfaces so preserve that.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The callers expect '1' on a successful probe,
so return 1 just like VIR_STRDUP would.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the occurrences of
ignore_value(VIR_STRDUP_QUIET(a, b));
with
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the occurrences of
ignore_value(VIR_STRDUP(a, b));
with
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use a temporary variable to allow copying from the
currently set source.
Always return 0 since none of the callers distinguishes
between 0 and 1 propagated from VIR_STRDUP.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virStorageSourceInitiatorCopy propagates the return
value from VIR_STRDUP, which returns 1 on a successful
copy.
Only error out on < 0, not non-zero values.
Fixes: 9ea3fdc6e9
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The CPU driver only supports CPU models for PPC64 architecture, not
plain PPC.
Failed to probe capabilities for /usr/bin/qemu-system-ppc:
this function is not supported by the connection driver:
'ppc' architecture is not supported by CPU driver
This fixes a bug in
commit db873ab3bc
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Thu May 17 17:08:42 2018 +0200
qemu: Adapt to changed ppc64 CPU model names
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some people from IBM does not use 'ibm.com' domain emails.
They use personal or other domains.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Now that we use g_strdup everywhere, delete vshStrdup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove all the uses of vshStrdup in favor of GLib's g_strdup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Split the parameters to make changes more readable.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Mark the 'str' variable as g_autofree and avoid the need for
a separate cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use 'str' for the allocated copy of the string and 'p'
for the pointer into that string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
While the default iptables setup used by Fedora/RHEL distros
only restricts traffic on the INPUT and/or FORWARD rules,
some users might have custom firewalls that restrict the
OUTPUT rules too.
These can prevent DHCP/DNS/TFTP responses from dnsmasq
from reaching the guest VMs. We should thus whitelist
these protocols in the OUTPUT chain, as well as the
INPUT chain.
Signed-off-by: Malina Salina <malina.salina@protonmail.com>
Initial patch then modified to add unit tests and IPv6
support
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some people from IBM does not use 'ibm.com' domain emails.
Suggested-by: Leonardo Augusto Guimarães Garcia <lagarcia@br.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
With the removal of support for log message stack traces, there is
nothing using the logging filter/output flags and they can be removed.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The log filters have supported the use of a "+" before the source match
string to request that a stack trace be emitted for every log message:
commit 548563956e
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed May 9 15:18:56 2012 +0100
Allow stack traces to be included with log messages
Sometimes it is useful to see the callpath for log messages.
This change enhances the log filter syntax so that stack traces
can be show by setting '1:+NAME' instead of '1:NAME'.
With the huge & ever increasing number of logging statements per file,
this will be incredibly verbose and have a major performance penalty.
This makes the feature impractical to use widely and as such it is not
worth the code maint cost.
Removing this seldom used feature allows us to drop the 'execinfo'
module in gnulib which provides the backtrace() function which doesn't
exist on non-Linux.
Users who want to get stack traces of parts of libvirt can use GDB,
or systemtap for live tracing with minimal perf impact.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
These functions don't really abort() on OOM. The fix was merged
upstream, but not in the minimal version we require. Provide our
own implementation which can be removed once we bump the minimal
version.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As part of an goal to eliminate Perl from libvirt build tools,
rewrite the minimize-po.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of an goal to eliminate Perl from libvirt build tools,
rewrite the augeas-gentest.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
The use of $(AUG_GENTEST) as a dependancy in the makefiles needed
to be fixed, because this was assumed to be the filename of the
script, but is in fact a full shell command line.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The use of $(AUG_GENTEST) as a dependency in the makefiles is
a problem because this was assumed to be the filename of the
script, but is in fact a full shell command line.
Split it into two variables, so it can be correctly used for
dependencies.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With glib inclusion, some of its functions have
__attribute__((__malloc__)) which make compiler realize we want
to use the same attribute for some trivial functions of ours. For
instance qemuDomainManagedSavePath(). I don't see any real
benefit into using the attribute, so disable that suggestion.
In fact, wrong use of the attribute may lead to mysterious bugs:
https://gitlab.gnome.org/GNOME/glib/issues/1465
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
This commit let QEMU command line define 'xres' and 'yres' properties
if XML contains both properties from video model: based on resolution
fields 'x' and 'y'. There is a conditional structure inside
qemuDomainDeviceDefValidateVideo() that validates if video model
supports this feature. This commit includes the necessary changes to
cover resolution for 'video-qxl-resolution' test cases too.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
This commit adds resolution element with parameters 'x' and 'y' into video
XML domain group definition. Both, properties were added into an element
called 'resolution' and it was added inside 'model' element. They are set
as optional. This element does not follow QEMU properties 'xres' and
'yres' format. Both HTML documentation and schema were changed too. This
commit includes a simple test case to cover resolution for QEMU video
models. The new XML format for resolution looks like:
<model ...>
<resolution x='800' y='600'/>
</model>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
When searching qemuCaps->domCapsCache for existing domCaps data,
we check for a matching pair of arch+virttype+machine+emulator. However
for the hash table key we only use the machine string. So if the
cache already contains:
x86_64 + kvm + pc + /usr/bin/qemu-kvm
But a new VM is defined with
x86_64 + qemu + pc + /usr/bin/qemu-kvm
We correctly fail to find matching cached domCaps, but then attempt
to use a colliding key with virHashAddEntry
Fix this by building a hash key from the 4 values, not just machine
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This patch changes all virAsprintf calls to use the GLib API
g_strdup_printf in qemu_driver.c
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The g_auto*() changes made by the previous patches made a lot
of 'cleanup' labels obsolete. Let's remove them.
Suggested-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
String and other scalar pointers an be auto-unref, sparing us
a VIR_FREE() call.
This patch uses g_autofree whenever possible with strings and
other scalar pointer types.
Suggested-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Several pointer types can be auto-unref for the great majority
of the uses made in qemu_driver, sparing us a virObjectUnref()
call.
This patch uses g_autoptr() in the following pointer types inside
qemu_driver.c, whenever possible:
- qemuBlockJobDataPtr
- virCapsPtr
- virConnect
- virDomainCapsPtr
- virNetworkPtr
- virQEMUDriverConfigPtr
Suggested-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch changes qemuDomainSnapshotLoad, qemuDomainCheckpointLoad and
qemuStateInitialize to use g_autoptr() and g_autofree, cleaning up
some virObjectUnref() and VIR_FREE() calls on each.
The reason this is being sent separately is because these are not
trivial search/replace cases. In all these functions some strings
declarations are moved inside local loops, where they are in fact
used, allowing us to erase VIR_FREE() calls that were made inside
the loop and in 'cleanup' labels.
Following patches with tackle more trivial cases of g_auto* usage
in all qemu_driver.c file.
Suggested-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the recently deleted libvirt macros into a separate section.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On musl _PATH_MOUNTED is defined in paths.h, not in mntent.h, which
causes compilation errors:
storage/storage_backend_fs.c: In function 'virStorageBackendFileSystemIsMounted':
storage/storage_backend_fs.c:255:23: error: '_PATH_MOUNTED' undeclared (first use in this function); did you mean 'XPATH_POINT'?
if ((mtab = fopen(_PATH_MOUNTED, "r")) == NULL) {
^~~~~~~~~~~~~
XPATH_POINT
Fix this including paths.h if _PATH_MOUNTED is still not defined after
including mntent.h. This also works with glibc and uClibc-ng.
Signed-off-by: Carlos Santos <casantos@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On musl libc "stderr" is a preprocessor macro whose expansion leads to
compilation errors:
In file included from qemu/qemu_process.c:66:
qemu/qemu_process.c: In function 'qemuProcessQMPFree':
qemu/qemu_process.c:8418:21: error: expected identifier before '(' token
VIR_FREE((proc->stderr));
^~~~~~
Prevent this by renaming the homonymous field in the _qemuProcessQMP
struct to "stdErr".
Signed-off-by: Carlos Santos <casantos@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These functions got a reference to the driver config
without actually using it:
processNicRxFilterChangedEvent
qemuConnectDomainXMLToNative
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Back in July 2009, in the days before libvirt supported explicitly
assigning a PCI address to every device, code was added to save the
PCI addresses of hotplugged network, disk, and hostdevs in the domain
status with this XML element:
<state devaddr='domain🚌slot'/>
This was added in commits 4e21a95a, 01654107, in v0.7.0, and 0c5b7b93
in v0.7.1.
Then just a few months later, in November 2009, The code that actually
formatted the "devaddr='blah'" into the status XML was removed by
commit 1b0cce7d3 (which "introduced a standardized data structure for
device addresses"). The code to *parse* the devaddr from the status
was left in for backward compatibility though (it just parses it into
the "standard" PCI address).
At the time the devaddr attribute was added, a few other attributes
already existed in the <state> element for network devices, and these
were removed over time (I haven't checked the exact dates of this),
but 10 years later, in libvirt v5.8.0, we *still* maintain code to
parse <state devaddr='blah'/> from the domain status.
In the meantime, even distros so old that we no longer support them in
upstream libvirt are using a libvirt new enough that it doesn't ever
write <state devaddr='blah'/> to the domain status XML.
Since the only way a current libvirt would ever encounter this element
would be if someone was upgrading directly from libvirt <= v0.7.5 with
running guests, it seems safe to finally remove the code that parses it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Delete the macro to prevent its usage in new code.
The GLib version should be used instead:
p = g_steal_pointer(&ptr);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the macro definition to prevent its usage in new code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 1e2ae2e311 deleted the last use
of VIR_AUTOFREE but forgot to delete the macro definition.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we no longer use any of the macros from this file, remove it.
This also removes a typo.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that all the types using VIR_AUTOUNREF have a cleanup func defined
to virObjectUnref, use g_autoptr instead of VIR_AUTOUNREF.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all of its use by the GLib
macro version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all uses of VIR_DEFINE_AUTOPTR_FUNC
with G_DEFINE_AUTOPTR_CLEANUP_FUNC in preparation for replacing the
rest.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOFREE is just an alias for g_autofree. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOCLEAN is just an alias for g_auto. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOCLEAN is just an alias for g_auto. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We try to keep the example programs independent of libraries
other than libvirt.
Rename the locally defined ARRAY_CARDINALITY macro to G_N_ELEMENTS
which GLib provides, even though we don't actually include GLib.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Also define the macro for building with GLib older than 2.60
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead of enumerating every single macro variant, just emit
a more generic error.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We started using G_GNUC macros instead of ATTRIBUTE for some attributes.
Adjust this syntax-check accordingly.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When undefining a UEFI domain its nvram file has to be properly handled as
well. It's mandatory to use one of --nvram and --keep-nvram options when
'virsh undefine <domain>' is issued for a UEFI domain. To fix the bug as
reported, virsh should return an error message if neither option is used
and the nvram file should be removed when --nvram is given.
The cause of the problem is that when qemuDomainUndefineFlags() is invoked
on an inactive domain the path to its nvram file is empty. This commit
aims to fix this by formatting and filling in the path in time for the
nvram removal code to run properly.
https://bugzilla.redhat.com/show_bug.cgi?id=1751596
Signed-off-by: Pavel Mores <pmores@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Name the macro G_GNUC_UNUSED instead of ATTRIBUTE_UNUSED
to match the rest of libvirt code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Prefer G_GNUC_NULL_TERMINATED which was introduced in GLib 2.8.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove all usage of ATTRIBUTE_NORETURN in favor of GLib's
G_GNUC_NORETURN.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add an exception for the GLib versions of the macros we already ignore.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
They are already defined in glib.h.
(libxml2 also has them defined)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to have multiple security drivers hidden under one
virSecurity* call, we have virSecurityStack driver which holds a
list of registered security drivers and for every virSecurity*
call it iterates over the list and calls corresponding callback
in real security drivers. For instance, for
virSecurityManagerSetAllLabel() it calls
domainSetSecurityAllLabel callback sequentially in NOP, DAC and
(possibly) SELinux or AppArmor drivers. This works just fine if
the callback from every driver returns success. Problem arises
when one of the drivers fails. For instance, aforementioned
SetAllLabel() succeeds for DAC but fails in SELinux in which
case all files that DAC relabelled are now owned by qemu:qemu (or
whomever runs qemu) and thus permissions are leaked. This is even
more visible with XATTRs which remain set for DAC.
The solution is to perform a rollback on failure, i.e. call
opposite action on drivers that succeeded.
I'm providing rollback only for set calls and intentionally
omitting restore calls for two reasons:
1) restore calls are less likely to fail (they merely remove
XATTRs and chown()/setfilecon() file - all of these operations
succeeded in set call),
2) we are not really interested in restore failures - in a very
few places we check for retval of a restore function we do so
only to print a warning.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1740024
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In near future we will need to walk through the list of internal
drivers in reversed order. The simplest solution is to turn
singly linked list into a doubly linked list.
We will not need to start from the end really, so there's no tail
pointer kept.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This function returns the name of the secdriver. Since the name
is invariant we don't really need to lock the manager - it won't
change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This function is in fact returning the name of the virtualization
driver that registered the security manager/driver.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In upcoming commits, virSecurityManagerSetAllLabel() will perform
rollback in case of failure by calling
virSecurityManagerRestoreAllLabel(). But in order to do that, the
former needs to have @migrated argument so that it can be passed
to the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The usleep function was missing on older mingw versions, but we can rely
on it existing everywhere these days. It may only support times upto 1
second in duration though, so we'll prefer to use g_usleep instead.
The commandhelper program is not changed since that can't link to glib.
Fortunately it doesn't need to build on Windows platforms either.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_strerror is offers the safety/correctness benefits of strerror_r, with
the API design convenience of strerror.
Use of virStrerror should be eliminated through the codebase in favour
of g_strerror.
commandhelper.c is a special case as its a tiny single threaded test
program, not linked to glib, so it just uses traditional strerror().
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Converting from virObject to GObject is reasonably straightforward,
as illustrated by this patch for virIdentity
In the header file
- Remove
typedef struct _virIdentity virIdentity
- Add
#define VIR_TYPE_IDENTITY virIdentity_get_type ()
G_DECLARE_FINAL_TYPE (virIdentity, vir_identity, VIR, IDENTITY, GObject);
Which provides the typedef we just removed, and class
declaration boilerplate and various other constants/macros.
In the source file
- Change 'virObject parent' to 'GObject parent' in the struct
- Remove the virClass variable and its initializing call
- Add
G_DEFINE_TYPE(virIdentity, vir_identity, G_TYPE_OBJECT)
which declares the instance & class constructor functions
- Add an impl of the instance & class constructors
wiring up the finalize method to point to our dispose impl
In all files
- Replace VIR_AUTOUNREF(virIdentityPtr) with g_autoptr(virIdentity)
- Replace virObjectRef/Unref with g_object_ref/unref. Note
the latter functions do *NOT* accept a NULL object where as
libvirt's do. If you replace g_object_unref with g_clear_object
it is NULL safe, but also clears the pointer.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To simplify the later conversion from virObject to GObject, introduce
the use of g_autoptr to the virIdentity implementnation and test suite.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Replace use of the gnulib base64 module with glib's own base64 API family.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Libvirt currently uses the VIR_AUTOUNREF macro for auto cleanup of
virObject instances. GLib approaches things differently with GObject,
reusing their g_autoptr() concept.
This introduces support for g_autoptr() with virObject, to facilitate
the conversion to GObject.
Only virObject classes which are currently used with VIR_AUTOREF are
updated. Any others should be converted to GObject before introducing
use of autocleanup.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To facilitate porting over to glib, this rewrites the auto cleanup
macros to use glib's equivalent.
As a result it is now possible to use g_autoptr/VIR_AUTOPTR, and
g_auto/VIR_AUTOCLEAN, g_autofree/VIR_AUTOFREE interchangably, regardless
of which macros were used to declare the cleanup types.
Within the scope of any single method, code must remain consistent
using either GLib or Libvirt macros, never mixing both. New code
must preferentially use the GLib macros, and old code will be
converted incrementally.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Using the standard macro will facilitate the conversion to glib's
auto cleanup macros.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the string duplication APIs to use the g_strdup family of APIs.
We previously used the 'strdup-posix' gnulib module because mingw does
not set errno to ENOMEM on failure
We previously used the 'strndup' gnulib module because this function
does not exist on mingw.
We previously used the 'vasprintf' gnulib module because of many GNU
supported format specifiers not working on non-Linux platforms. glib's
own equivalent standardizes on GNU format specifiers too.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the VIR_ALLOC family of APIs with use of the g_malloc family of
APIs. Use of VIR_ALLOC related functions should be incrementally phased
out over time, allowing return value checks to be dropped. Use of
VIR_FREE should be replaced with auto-cleanup whenever possible.
We previously used the 'calloc-posix' gnulib module because mingw does
not set errno to ENOMEM on failure.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add the main glib.h to internal.h so that all common code can use it.
Historically glib allowed applications to register an alternative
memory allocator, so mixing g_malloc/g_free with malloc/free was not
safe.
This was feature was dropped in 2.46.0 with:
commit 3be6ed60aa58095691bd697344765e715a327fc1
Author: Alexander Larsson <alexl@redhat.com>
Date: Sat Jun 27 18:38:42 2015 +0200
Deprecate and drop support for memory vtables
Applications are still encourged to match g_malloc/g_free, but it is no
longer a mandatory requirement for correctness, just stylistic. This is
explicitly clarified in
commit 1f24b36607bf708f037396014b2cdbc08d67b275
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Sep 5 14:37:54 2019 +0100
gmem: clarify that g_malloc always uses the system allocator
Applications can still use custom allocators in general, but they must
do this by linking to a library that replaces the core malloc/free
implemenentation entirely, instead of via a glib specific call.
This means that libvirt does not need to be concerned about use of
g_malloc/g_free causing an ABI change in the public libary, and can
avoid memory copying when talking to external libraries.
This patch probes for glib, which provides the foundation layer with
a collection of data structures, helper APIs, and platform portability
logic.
Later patches will introduce linkage to gobject which provides the
object type system, built on glib, and gio which providing objects
for various interesting tasks, most notably including DBus client
and server support and portable sockets APIs, but much more too.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Prepare for linking with glib by probing for it at configure
time. Per supported platforms target, the min glib versions on
relevant distros are:
RHEL-8: 2.56.1
RHEL-7: 2.50.3
Debian (Buster): 2.58.3
Debian (Stretch): 2.50.3
OpenBSD (Ports): 2.58.3
FreeBSD (Ports): 2.56.3
OpenSUSE Leap 15: 2.54.3
SLE12-SP2: 2.48.2
Ubuntu (Xenial): 2.48.0
macOS (Homebrew): 2.56.0
This suggests that a minimum glib of 2.48 is a reasonable target.
This aligns with the minimum version required by qemu too.
We must disable the bad-function-cast warning as various GLib APIs
and macros will trigger this.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Rename the existing virSecuritySELinuxRestoreImageLabelInt
to virSecuritySELinuxRestoreImageLabelSingle, and extend the new
ImageLabelInt handle externalDataStore
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
All the SetFileCon calls only differ by the label they pass in.
Rework the conditionals to track what label we need, and use a
single SetFileCon call
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Rename the existing virSecurityDACRestoreImageLabelInt
to virSecurityDACRestoreImageLabelSingle, and extend the new
ImageLabelInt handle externalDataStore
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add virStorageSourceNewFromExternalData, similar to
virStorageSourceNewFromBacking and use it to fill in a
virStorageSource for externalDataStore
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
For the only usage, the rel == parent->backingStoreRaw, so drop
the direct access
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Call qcow2GetExtensions to actually fill in the virStorageSource
externalDataStoreRaw member
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add the plumbing to track a qcow2 external data file path in
virStorageSource
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
From qemu.git docs/interop/qcow2.txt
== String header extensions ==
Some header extensions (such as the backing file format name and
the external data file name) are just a single string. In this case,
the header extension length is the string length and the string is
not '\0' terminated. (The header extension padding can make it look
like a string is '\0' terminated, but neither is padding always
necessary nor is there a guarantee that zero bytes are used
for padding.)
So we shouldn't be checking for a \0 byte at the end of the backing
format section. I think in practice there always is a \0 but we
shouldn't depend on that.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
To backingFormat, which makes it more clear. Move it to the end of
the argument list which will scale nicer with future patches
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
...to qcow2GetExtensions. We will extend it for more extension
parsing in future patches
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is a step towards making this qcow2GetBackingStoreFormat into
a generic qcow2 extensions parser
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is a step towards making this qcow2GetBackingStoreFormat into
a generic qcow2 extensions parser
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Letting qcowXGetBackingStore fill in format gives the same behavior
we were opencoding in qcow1GetBackingStore
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
From f772b3d91f the intention of this code seems to be to set
format=NONE when the image does not have a backing file. However
'buf' here is the whole qcow1 file header. What we want to be
checking is 'res' which is the parsed backing file path.
qcowXGetBackingStore sets this to NULL when there's no backing file.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1755803
The /dev/tpmN file can be opened only once, as implemented in
drivers/char/tpm/tpm-dev.c:tpm_open() from the kernel's tree. Any
other attempt to open the file fails. And since we're opening the
file ourselves and passing the FD to qemu we will not succeed
opening the file again when locking it for seclabel remembering.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
While in most cases we want to remember/recall label for a
chardev, there are some special ones (like /dev/tpm0) where we
don't want to remember the seclabel nor recall it. See next
commit for rationale behind.
While the easiest way to implement this would be to just add new
argument to virSecurityDACSetChardevLabel() this one is also a
callback for virSecurityManagerSetChardevLabel() and thus has
more or less stable set of arguments. Therefore, the current
virSecurityDACSetChardevLabel() is renamed to
virSecurityDACSetChardevLabelHelper() and the original function
is set to call the new one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
So far all items on the chown/setfilecon list have the same
.remember value. But this will change shortly. Therefore, don't
try to lock paths which we won't manipulate XATTRs for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
On Fedora, already whitelisted paths to AAVMF and OVMF binaries
are symlinks to binaries under /usr/share/edk2/. Add that directory
to the RO whitelist so virt-aa-helper-test passes
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This isn't exactly equivalent setting (acpi_firmware may point to
non-SLIC ACPI table), but it's the most behavior preserving option.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Libxl driver did not support setup additional acpi firmware to xen
guest. It is necessary to activate OEM Windows installs. This patch
allow to define in OS section acpi table param (which supported domain
common schema).
Signed-off-by: Ivan Kardykov <kardykov@tabit.pro>
[added info to docs/formatdomain.html.in]
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
All the 6 virGetConnect* functions in driver.c shares the
same code base. This patch creates a new static function
virGetConnectGeneric() that contains the common code to
be used with all other virGetConnect*.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The object locking test code is not run by any CI tests and has
bitrotted to the point where it isn't worth the effort to try to
fix it.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When constructing QMP capabilities we allocate a dummy domain
object to pass to qemuMonitorOpen(). However, after 75dd595861
the function also expects domain definition to be allocated for
the domain object. The referenced commit already fixed
qemumonitortestutils.c but forgot to fix the other caller:
qemuProcessQMPConnectMonitor().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the ccf-assist pSeries
feature, based on the QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
capability that was added in the previous patch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Linux kernel 5.1 added a new PPC KVM capability named
KVM_PPC_CPU_CHAR_BCCTR_FLUSH_ASSIST, which is exposed to the QEMU guest
since QEMU commit 8ff43ee404d under a new sPAPR capability called
SPAPR_CAP_CCF_ASSIST. This cap indicates whether the processor supports
hardware acceleration for the count cache flush workaround, which
is a software workaround that flushes the count cache on context
switch. If the processor has this hardware acceleration, the software
flush can be shortened, resulting in performance gain.
This hardware acceleration is defaulted to 'off' in QEMU. The reason
is that earlier versions of the Power 9 processor didn't support
it (it is available on Power 9 DD2.3 and newer), and defaulting this
option to 'on' would break migration compatibility between the Power 9
processor class.
However, the user running a P9 DD2.3+ hypervisor might want to create
guests with ccf-assist=on, accepting the downside of only being able
to migrate them only between other P9 DD2.3+ hosts running upstream
kernel 5.1+, to get a performance boost.
This patch adds this new capability to Libvirt, with the name of
QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is a very simple framebuffer device supported by qemu that
is mostly intended to use as a boot framebuffer in conjunction with a
vgpu. However, there is also a standalone ramfb device that can be used
as a primary display device and is useful for e.g. aarch64 guests where
different memory mappings between the host and guest can prevent use of
other devices with framebuffers such as virtio-vga.
https://bugzilla.redhat.com/show_bug.cgi?id=1679680 describes the
issues in more detail.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Add a qemu capbility to see if the standalone ramfb device is available.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
When the bochs display type was added, the capability was never checked.
Add that check in the same place as the other video device capability
checks.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
This will simplify adding support for qcow2 external data_file
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is closer to what security_selinux.c does, and will help add
support for qcow2 external data_files
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This mirrors the code layout in security_selinux.c. It will also make
it easier to share the checks for qcow2 external data_file support
eventually
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The virStorageSource must have everything it needs
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
There's only one caller, so open code the file_add_path behavior
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
true is always passed here, so delete the unused code path and
adjust the associated comment
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
It is the only user. Rename it to match the local style
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The gnulib syntax-check rules are spread across GNUmakefile, cfg.mk and
maint.mk. This made sense when we were getting two of the files from the
gnulib submodule. Now that we own all files though, we can at least
merge maint.mk and cfg.mk together. GNUmakefile can be eliminated when
we switch to meson.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If we've marked rules as skipped, there's no sense keeping them in the
maint.mk file.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The standard maint.mk from gnulib provides alot more than just the
'syntax-check' target. This can all be purged to give a more minimal
file.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The syntax-check rules are the one bit of make usage that will
stay around for a while after the meson conversion. Move them
into the build-aux directory in preparation for refactoring
to make them independent from automake.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We're going to be eliminating autotools and gnulib, but we still wish to
have the 'make syntax-check' functionality.
This imports the minimal set of gnulib files required to keep this
working.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit a5a777a8ba.
After previous commit the domain won't disappear while connecting
to monitor. There's no need to ref monitor config then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When connecting to qemu's monitor the @vm object is unlocked.
This is justified - connecting may take a long time and we don't
want to wait with the domain object locked. However, just before
the domain object is locked again, the monitor's FD is registered
in the event loop. Therefore, there is a small window where the
event loop has a chance to call a handler for an event that
occurred on the monitor FD but vm is not initalized properly just
yet (i.e. priv->mon is not set). For instance, if there's an
incoming migration, qemu creates its socket but then fails to
initialize (for various reasons, I'm reproducing this by using
hugepages but leaving the HP pool empty) then the following may
happen:
1) qemuConnectMonitor() unlocks @vm
2) qemuMonitorOpen() connects to the monitor socket and by
calling qemuMonitorOpenInternal() which subsequently calls
qemuMonitorRegister() the event handler is installed
3) qemu fails to initialize and exit()-s, which closes the
monitor
4) The even loop sees EOF on the monitor and the control gets to
qemuProcessEventHandler() which locks @vm and calls
processMonitorEOFEvent() which then calls
qemuMonitorLastError(priv->mon). But priv->mon is not set just
yet.
5) qemuMonitorLastError() dereferences NULL pointer
The solution is to unlock the domain object for a shorter time
and most importantly, register event handler with domain object
locked so that any possible event processing is done only after
@vm's private data was properly initialized.
This issue is also mentioned in v4.2.0-99-ga5a777a8ba.
Since we are unlocking @vm and locking it back, another thread
might have destroyed the domain meanwhile. Therefore we have to
check if domain is still active, and we have to do it at the
same place where domain lock is acquired back, i.e. in
qemuMonitorOpen(). This creates a small problem for our test
suite which calls qemuMonitorOpen() directly and passes @vm which
has no definition. This makes virDomainObjIsActive() call crash.
Fortunately, allocating empty domain definition is sufficient.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QEMU 2.11 for ppc64 changed all CPU model names to lower case. Since
libvirt can't change the model names for compatibility reasons, we need
to translate the matching lower case models to the names known by
libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit 2d8721e260.
This fix was both incomplete and too general. It only fixed domain
startup, but libvirt would still report empty list of supported CPU
models with recent QEMU for ppc64. On the other hand, while ppc64 QEMU
ignores case when looking up CPU model names, x86_64 QEMU does case
sensitive lookup. Without reverting this patch, libvirt could happily
accept CPU model names which are not supported by QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Clang's gnu99 mode is not quite the same as GCC's. It will complain
about redefined typedefs being a C11 feature, while GCC does not
complain and allows them in gnu99 mode.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1755303
With the recent work in daemon split and socket activation
daemons can come and go. They can and will be started many times
during a session which results in objects being autostarted
multiple times. This is not optimal. Use
virDriverShouldAutostart() to determine if autostart should be
done or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some of objects we manage can be autostarted on libvirtd startup
(e.g. domains, network, storage pools). The idea was that when
the host is started up these objects are started too without need
of user intervention. However, with the latest daemon split and
switch to socket activated, short lived daemons (we put --timeout
120 onto each daemon's command line) this doesn't do what we want
it to. The problem is not new though, we already had the session
daemon come and go and we circumvented this problem by
documenting it (see v4.10.0-92-g61b4e8aaf1). But now that we meet
the same problem at all fronts it's time to deal with it.
The solution implemented in this commit is to have a file (one
per each driver) that:
1) if doesn't exist, is created and autostart is allowed for
given driver,
2) if it does exist, then autostart is suppressed for given
driver.
All the files live in a location that doesn't survive host
reboots (/var/run/ for instance) and thus the file is
automatically not there on fresh host boot.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The comment says that the function kills domains and networks.
This is obviously not the case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When adding the -std=gnu99 flag, we set $wantwarn instead
of appending to it. This meant all the compiler warnings
were accidentally discarded.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We previously got -std=gnu99 secretly enabled as a side-effect
of requesting the 'stdarg' gnulib module. We rely on some
extensions from c99/gnu99 and while RHEL-7 supports this, it
still defaults to gnu89. RHEL-7 also supports some newer
standards but declares them experimental/incomplete, so sticking
with gnu99 is best bet for now & matches historical usage.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'make distcheck' target validates that a tarball builds and
is ready for release. We expect that libvirt builds cleanly on
all supported platforms, so we should be enabling -Werror when
running distcheck.
This ensures that our CI systems in turn also use -Werror.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'sched' module provides a sched.h header file for platforms which
lack it. We already check for the functions we need in configure, and
protect the use of sched.h where relevant, so don't need the compat
header in libvirt.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The isatty gnulib module adds a fix for Win32 platforms where it doesn't
work correctly with character devices like NUL. This is not a compelling
enough problem for libvirt to be concerned with.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ldexp gnulib module adds "-lm" to the $LIBS variable if-and-only-if
the ldexp() function require linking to libm. There is no harm in
linking to libm even if it isn't required for ldexp(), so simply drop
the gnulib module.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We don't need to care about very old GCC versions, so implementing the
ignore_value macro directly is not a significant burden.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We're using gnulib to get ffs, ffsl, rotl32, count_one_bits,
and count_leading_zeros. Except for rotl32 they can all be
replaced with gcc/clangs builtins. rotl32 is a one-line
trivial function.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
virDomainGetBlockInfo() returns error if called on a disk with no
source (a sourceless disk might be a removable media drive with no
media in it, for instance an empty CDROM or floppy drive).
So far this caused the virsh domblkinfo --all command to abort and
ignore any remaining (not yet displayed) disk devices. This patch
fixes the problem by first checking for existence of a <source>
element in the corresponding XML. If none is found, we avoid calling
virDomainGetBlockInfo() altogether as we know it's bound to fail in
that case.
https://bugzilla.redhat.com/show_bug.cgi?id=1619625
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Commit fb973cfbb4 added versioned test outputs for the above mentioned
tests but didn't actually enable them. Fix that mistake and fix the
output of the tsc-frequency test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test data was modernized to use actual caps but commit 4dadcaa98e
forgot to delete this test data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The last use was removed in 7b604379ba when we deleted the old
commandline parser.
The argv generator tests are provided by:
machine-aeskeywrap-on-caps
machine-aeskeywrap-on-cap
machine-aeskeywrap-off-caps
machine-aeskeywrap-off-cap
machine-deakeywrap-on-caps
machine-deakeywrap-on-cap
machine-deakeywrap-off-caps
machine-deakeywrap-off-cap
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The last use was removed in 7b604379ba when we deleted the old
commandline parser. The same functionality is tested by many tests for
pseries guests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The last use was removed in 7b604379ba when we deleted the old
commandline parser. The same functionality is tested by
'serial-pty-chardev'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was fixing a problem with old versions of mingw which had a
pthread.h that polluted the namespace with random symbols. This is no
longer relevant on our mingw platform targets.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This fixes a problem on mingw where it doesn't know how to report
certain errnos defined by POSIX, but not used on Windows. These are
not a real problem for libvirt.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The use of this script was discontinued when we stopped providing a full
ChangeLog in the dist with:
commit ce97c33a79
Author: Andrea Bolognani <abologna@redhat.com>
Date: Mon Apr 1 17:33:03 2019 +0200
maint: Stop generating ChangeLog from git
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
gnulib fixes a portability problem on AIX which is a platform we have
never targetted.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 83aca30f1e.
While the motivation of the original commit is fine, we are intending to
drop autoconf in favour of meson, and similarly wish to drop use of
gnulib. Removing this feature is part of that conversion work.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
stpcpy returns a pointer to the end of the string just copied
which in theory makes it easier to then copy another string
after it. We only use stpcpy in one place though and that
is trivially rewritten to avoid stpcpy with no loss in code
clarity or efficiency.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The mktempd module in gnulib provides an equivalent to 'mktemp -d' on
platforms which lack this shell command. All platforms on which libvirt
runs the affected tests have 'mktemp -d' support, so the gnulib module
is not required.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All use of this function was purged a long time ago in favour
of getaddrinfo
commit a8ae7d19f4
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Thu Oct 21 11:13:05 2010 +0100
Remove all use of inet_pton and inet_ntop
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The getopt-posix module fixes a problem with optind being incorrectly
set after a failed option parse. It was also previously used to allow
the bhyve driver to access a private internal reentrant getopt impl.
None of this matters to libvirt code any more.
This partially reverts
commit b436a8ae5c
Author: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Date: Thu Jun 9 00:50:35 2016 +0000
gnulib: add getopt module
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The _getopt_internal_r func is not intended for public use, it is an
internal function shared between the gnulib getopt and argp modules.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This command is hooked into the virsh hypervisor-cpu-compare command.
As such, the CPU model XML provided to the command will be compared
to the hypervisor CPU contained in the QEMU capabilities file for the
appropriate QEMU binary (for s390x, this CPU definition can be observed
via virsh domcapabilities).
QMP will report that the XML CPU is either identical to, a subset of,
or incompatible with the hypervisor CPU. s390 can also report that
the XML CPU is a "superset" of the hypervisor CPU. This response is
presented as incompatible, as this CPU model would not be able to run
on the hypervisor.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielh413@gmail.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Message-Id: <1568924706-2311-15-git-send-email-walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Interfaces with QEMU to compare CPU models. The command takes two CPU
models, A and B, that are given a model name and an optional list of
CPU features. Through the query-cpu-model-comparison command issued
via QMP, a result is produced that contains the comparison evaluation
string (identical, superset, subset, incompatible).
The list of properties (aka CPU features) that is returned from the QMP
response is ignored.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielh413@gmail.com>
Message-Id: <1568924706-2311-12-git-send-email-walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This command is hooked into the virsh hypervisor-cpu-baseline command.
The CPU models provided in the XML sent to the command will be baselined
via the query-cpu-model-baseline QMP command. The resulting CPU model
will be reported.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielh413@gmail.com>
Message-Id: <1568924706-2311-10-git-send-email-walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Interfaces with QEMU to baseline CPU models. The command takes two
CPU models, A and B, that are given a model name and an optional list
of CPU features. Through the query-cpu-model-baseline command issued
via QMP, a result is produced that contains a new baselined CPU model
that is guaranteed to run on both A and B.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielh413@gmail.com>
Message-Id: <1568924706-2311-8-git-send-email-walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Some older s390 CPU models (e.g. z900) will not report props as a
response from query-cpu-model-expansion. As such, we should make the
props field optional when parsing the return data from the QMP response.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-Id: <1568924706-2311-6-git-send-email-walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
query-cpu-model-baseline/comparison will accept a list of features
as part of the command. Since CPUs may be defined with CPU feature
policies, let's parse it to the appropriate boolean that the QMP
command expects.
A feature that is set to required, force, or if it is a hypervisor
CPU feature (-1), then set the property value to true. Otherwise
(optional, disabled) set the value to false.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-Id: <1568924706-2311-5-git-send-email-walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When expanding a CPU model via query-cpu-model-expansion, any features
that were a part of the original model are discarded. For exmaple,
when expanding modelA with features f1, f2, a full expansion may reveal
feature f3, but the expanded model will not include f1 or f2.
Let's pass a virCPUDefPtr to the expansion function in preparation for
taking features into consideration.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-Id: <1568924706-2311-4-git-send-email-walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Parseability of disk name is now checked in qemuDomainDeviceDefValidateDisk().
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The way in which the qemu driver generates aliases for disks involves
ignoring the partition number part of a target dev name. This means that
all partitions of a block device and the device itself all end up with the
same alias. If multiple such disks are specified in XML, the resulting
name clash makes qemu invocation fail.
Since attaching partitions to qemu VMs doesn't seem to make much sense
anyway, disallow partitions in target specifications altogether.
https://bugzilla.redhat.com/show_bug.cgi?id=1346265
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The VIR_TYPED_PARAM_* enum fields are defined in libvirt-common.h, not
in the remote protcol, so shouldn't be part of the protocol structs
output check. This avoids similar problems hitting when we add use of
glib, which has other such anonymous enums.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are various ideas / plans floating around for future libvirt work,
some of which is actively in progress. Historically we've never captured
this kind of information anywhere, except in mailing list discussions.
In particular guidelines in hacking.html.in don't appear until a policy
is actively applied.
This patch attempts to fill the documentation gap, by creating a new
"strategy" page which outlines the general vision for some notable
future changes. The key thing to note is that none of the stuff on this
page is guaranteed, plans may change as new information arises. IOW this
is a "best guess" as to the desired future.
This doc has focused on three areas, related to the topic of language
usage / consolidation
- Use of non-C languages for the library, daemons or helper tools
- Replacement of autotools with meson
- Use of RST and Sphinx for documentation (website + man pages)
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Consider having a nc binary in the path with a space in its name,
for example '/tmp/fo o/nc'
This results in libvirt running SSH with the following arg value
"'if ''/tmp/fo o/nc'' -q 2>&1 | grep \"requires
an argument\" >/dev/null 2>&1; then ARG=-q0;
else ARG=;fi;''/tmp/fo o/nc'' $ARG -U
/var/run/libvirt/libvirt-sock'"
The use of the single quote escaping was introduced by
commit 6ac6238de3
Author: Guido Günther <agx@sigxcpu.org>
Date: Thu Oct 13 21:49:01 2011 +0200
Use virBufferEscapeShell in virNetSocketNewConnectSSH
to escape the netcat command since it's passed to the shell. Adjust
expected test case output accordingly.
While the intention of this change was good, the result is broken as it
is still underquoted.
On the SSH server side, SSH itself runs the command via the shell.
Our command is then invoking the shell again. Thus we see
$ virsh -c qemu+ssh://root@domokun/system?netcat=%2Ftmp%2Ffo%20o%2Fnc list
error: failed to connect to the hypervisor
error: End of file while reading data: sh: /tmp/fo: No such file or directory: Input/output error
With the second level of escaping added we can now successfully use a nc
binary with a space in the path.
The original test case added was misleading as it illustrated using a
binary path of 'nc -4' which is not a path, it is a command with a
separate argument, which is getting interpreted as a path.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the error code path, the temporary parameters are not freed.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the domain capabilities XML there are FW image paths printed.
There are two sources for the image paths (in order of
preference):
1) firmware descriptor files - as returned by
qemuFirmwareGetSupported()
2) a compile time list of FW:NRAM pairs which can be overridden
in qemu.conf
If either of those contains a duplicate FW image path (which is
a valid use case) it is printed twice in the capabilities XML.
While it's technically not a bug, it doesn't look good.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Similarly to the snapshot code there's no reason to modify current
checkpoint until we are done creating the new one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit f105627992 we store whether a snapshot is current globally
rather than locally in the snapshot object.
This means that we don't have to unset the current snapshot prior to
taking/reverting the snapshot and we can do it only when everything is
done successfully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The NVDIMM backend file can be a normal file or a real device file,
Current xml example and explainations may mislead users. So add more
info about the NVDIMM related elements and update the xml examples.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The AppArmor profile generated by virt-aa-helper is too strict for swtpm.
This change contains 2 small fixes:
- Relax append access to swtpm's log file to permit write access instead.
Append access is insufficient because the log is opened with O_CREAT.
- Permit swtpm to acquire a lock on its lock file.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Ensure that the FD we're passing to QEMU is actually open, so we get a
sane error message upfront instead of telling QEMU to use a closed FD.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The video private data was not initializing the vhostuser FD
causing us to attempt to close FD 0 many times over.
Fixes
commit ca60ecfa8c
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Mon Sep 23 14:44:36 2019 +0400
qemu: add qemuDomainVideoPrivate
Since the test suite does not invoke qemuExtDevicesStart(), no
vhost_user_fd will be present when generating test XML. To deal
with this we can must a fake FD number. While the current XML
is using FD == 0, we pick a very interesting number that's unlikely
to be a real FD, so that we're more likely to see any mistakes
closing the invalid FD.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the new generator residing in the monitor code rather than directly
using qemuMonitorJSONTransactionAdd.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Unify with other code that generates parameters for the 'transaction'
command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Rather than generating the transaction contents in random places add a
unified set of APIs to generate the contents for a 'transaction' for the
dirty bitmap APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The QEMU_CAPS_INCREMENTAL_BACKUP will be enabled once all bits of the
incremental backup feature work as expected which means also properly
interacting with blockjobs and snapshots.
Thus we can allow blockjobs and snapshots if QEMU_CAPS_INCREMENTAL_BACKUP
is present even when checkpoints exist.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Rather than having to fix 5 places once we support the combination, add
a function called by all the blockjob/snapshot APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Checkpoints by themselves are not very useful for anything else than
testing the few bitmap interactions that are currently implemented.
It's very unlikely that anybody used this feature and thus we can
disable it until we have a more complete implementation ready.
Additionally the code for deleting checkpoints has many broken failure
scenarios which should be fixed first. This will require support of
deleting a bitmap in a qemu 'transaction' which was not released yet.
Curious users obviously can use the qemu namespace in the XML to enable
this for experiments:
<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
...
<qemu:capabilities>
<qemu:add capability='incremental-backup'/>
</qemu:capabilities>
</domain>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a new all-covering capability which will be used to interlock
incremental backup support until all bits are ready.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a 'cleanup' label and use jumps as we do in other places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Once somebody is motivated enough to add the support for the quiesce
flag or offline checkpoint deletion they are welcome to do so but we
don't need to have a reminder.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There's nothing that uses it directly now. Also not allowing direct use
will promote our layering.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Finish the refactor by moving and renaming functions from qemu_domain.c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Move all extensive functions to a new file so that we don't just pile
everything in the common files. This obviously isn't possible with
straight code movement as we still need stubs in qemu_driver.c
Additionally some functions e.g. for looking up a checkpoint by name
were so short that moving the impl didn't make sense.
Note that in the move the new file also doesn't use
virQEMUMomentReparent but rather an stripped down copy. As I plan to
split out snapshot code into a separate file the unification doesn't
make sense any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The interlocking with snapshots is executed prior to the ACL check so if
a VM has snapshots invoking the checkpoint API may leak it's existance.
Introduced with the qemuDomainCheckpointCreateXML API implementation in
commit 5f4e079650.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It is documented that a command to run inside the container can be
passed with the -c arg.
virt-login-shell -c "ls -l /"
This fixes
commit 4feeb2d986
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Aug 1 10:58:31 2019 +0100
tools: split virt-login-shell into two binaries
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We recently forbid the use of --listen with socket activation:
commit 3a6a725b8f
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Aug 22 14:52:16 2019 +0100
remote: forbid the --listen arg when systemd socket activation
In this change we forgot that virtproxyd doesn't have a --listen
parameter, and instead behaves as if it was always present. Thus
when systemd socket activation is present, we must disable this
built-in default
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If a symbol file for either of NSS modules is changed then
subsequent 'make' doesn't regenerate the library, because there
is no implicit dependency between the library and symbols file.
Put an explicit dependency into the Makefile then. Unfortunately,
setting _DEPENDENCIES makes us lose automake's generated
dependencies (see src/Makefile.am:592 for details). But
fortunately, the only dependency we had was _LIBADD variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Similarly to gethostbyname3(), the @addr must be freed on return
from the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The findLease() function allocates @addr array iff no error
occurred and at least one satisfactory record was found.
Therefore, there is no need to call free() if findLease() failed,
or did not find any records as addr == NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When parsing leases file, appendAddr() is called to append parsed
tuple (address, expiry time, family) into an array. Whilst doing
so, the array is searched for possible duplicate. This is done by
comparing each item of the array by passed @family: if @family is
AF_INET then the item is viewed as IPv4 address. Similarly, if
@family is AF_INET6 then the item is viewed as IPv6 address. This
is not exactly right - the array can contain addresses of both
families and thus the address family of each item of the array
must be considered.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
On Fedora 31, starting a 'mock' build alters /proc/$pid/cgroup,
probably due to usage of systemd-nspawn.
Before:
$ cat /proc/self/cgroup
0::/user.slice/user-1000.slice/...
After:
$ cat /proc/self/cgroup
1:name=systemd:/
0::/user.slice/user-1000.slice/...
The cgroupv2 code mishandles that first line in the second case, which
causes VM startup to fail with: Unable to read from
'/sys/fs/cgroup/machine/cgroup.controllers': No such file or directory
The kernel docs[1] say that the cgroupv2 path will always start with
'0::', which in the code here controllers="". Only set the v2 placement
path when we see that cgroup file entry.
[1] https://www.kernel.org/doc/html/v5.3/admin-guide/cgroup-v2.html#processeshttps://bugzilla.redhat.com/show_bug.cgi?id=1751120
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The code that gets the job to refresh disk sizes was not merged yet so
remove this artifact.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'vm' is passed in which contains the definition which contains the UUID
so we don't need another parameter for this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'vm' is passed in which contains the definition which contains the UUID
so we don't need another parameter for this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move it to qemu_domain.c and rename it to qemuDomainObjFromDomain. This
will allow reusing it after splitting out checkpoint code from
qemu_driver.c.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Blacklist Perl and Shell code in favour of Python for
sake of readability and portability.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As it turns out, on my 32bit ARM machine size_t is not the same
size as ULL. However, @length argument for both functions is type
of size_t but it's treated as ULL - for instance when passed to
qemuMonitorJSONMakeCommand(). The problem is that because of
"U:size" the virJSONValueObjectAddVArgs() expects an ULL argument
but on the stack there are size_t and char * arguments (which
coincidentally add up to size of ULL). So the created command has
only two arguments "val" and incorrect "size" and no "path" which
is required.
I've tried to find other occurrences of this pattern but at the
rest of places where size_t is used it tracks size of an array so
that's safe.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
We stopped generating a giant ChangeLog file in
commit ce97c33a79
Author: Andrea Bolognani <abologna@redhat.com>
Date: Mon Apr 1 17:33:03 2019 +0200
maint: Stop generating ChangeLog from git
so there is no reason to compress it anymore.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Drop the 'driver' argument since it can be extracted from private data
to shorten the argument list.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that qemu 4.1 was released we can update the capabilities to the
final form.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Before the refactoring that properly separated the network driver from
the hypervisor driver and forced all interaction to go through public
APIs, all network usage counters were zeroed when the network driver
was initialized, and the network driver's now-deprecated
"semi-private" API networkNotifyActualDevice() was called for every
interface of every domain as each hypervisor "reconnected" its domains
during a libvirtd restart, and this would refresh the usage count for
each network.
Post-driver-split, during libvirtd restart/reconnection of the running
domains, the function virDomainNetNotifyActualDevice() is called by
each hypervisor driver for every interface of every domain restart,
and this function has code to re-register interfaces, but it only
calls into the network driver to re-register those ports that don't
already have a valid portid (ie. one that is not simply all 0),
assuming that those with valid portids are already known (and counted)
by the network driver.
commit 7ab9bdd47 recently modified the network driver so that, in most
cases, it properly resyncs each network's connection count during
libvirtd (or maybe virtnetworkd) restart by iterating through the
network's port list. This doesn't account for the case where a network
is destroyed and restarted while there are running domains that have
active ports on the network. In that case, the entire port list and
connection count for that network is lost, and now even a restart of
libvirtd/virtnetworkd/virtqemud, which in the past would resync the
connection count, doesn't help (the network driver thinks there are no
active ports, while the hypervisor driver knows about all the active
ports, but mistakenly believes that the network driver also knows).
The solution to this is to not just bypass valid portids during the
call to virDomainNetworkNotifyActualDevice(). Instead, we query the
network driver about the portid that was preserved in the domain
status, and if it is not registered, we register it.
(NB: while it would technically be correct to just generate a new
portid for these cases, it makes for less churn in portids (and thus
may make troubleshooting simpler) if we make the small fix to
virDomainNetDefActualToNetworkPort() that preserves existing valid
portids rather than unconditionally generating a new one.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
define a VIR_DEFINE_AUTOPTR_FUNC() to autofree virNetworkPortDefs, and
convert all uses of virNetworkPortDefPtr that are appropriate to use
it.
This coincidentally fixes multiple potential memory leaks (in failure
cases) in networkPortCreateXML()
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The existing QEMU and vbox URI path validation consider
that a privileged user can use both a "/system" and a
"/session" URI. This differs from all the other drivers
that forbids the root user to use "/session" URI.
Let's update virConnectValidateURIPath() to handle these
cases as exceptions, using the already existent 'entityName'
value to handle "QEMU" and "vbox" differently. This allows
us to use the validateURI function in these cases without
changing the existing behavior of other drivers.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The code to validate the URI path is repeated across several
files. This patch creates a common validation code to be
used across all of them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A virDomainNetDef object in a domain's nets array might contain a
virDomainHostdevDef, and when this is the case, the domain's hostdevs
array will also have a pointer to this embedded hostdev (this is done
so that internal functions that need to perform some operation on all
hostdevs won't leave out the type='hostdev' network interfaces).
When a network device was updated with virDomainUpdateDeviceFlags(),
we were replacing the entry in the nets array (and free'ing the
original) but forgetting about the pointer in the hostdevs array
(which would then point to the now-free'd hostdev contained in the old
net object.) This often resulted in a libvirtd crash.
The solution is to add a function, virDomainNetUpdate(), called by
qemuDomainUpdateDeviceConfig(), that updates the hostdevs array
appropriately along with the nets array.
Resolves: https://bugzilla.redhat.com/1558934
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The private data for video definition is created in
virDomainVideoDefNew() and we attempt to free it in
virDomainVideoDefFree(). This seems to work, except
the free function calls clear function which zeroes
out the whole structure and thus virObjectUnref()
which is called on private data does nothing.
2,568 bytes in 107 blocks are definitely lost in loss record 207 of 213
at 0x4A35476: calloc (vg_replace_malloc.c:752)
by 0x50A6048: virAllocVar (viralloc.c:346)
by 0x513CC5A: virObjectNew (virobject.c:243)
by 0x4DC1DEE: qemuDomainVideoPrivateNew (qemu_domain.c:1337)
by 0x51A6BD6: virDomainVideoDefNew (domain_conf.c:2831)
by 0x51B9F06: virDomainVideoDefParseXML (domain_conf.c:15541)
by 0x51CB761: virDomainDefParseXML (domain_conf.c:21158)
by 0x51C5973: virDomainDefParseNode (domain_conf.c:21708)
by 0x51C583A: virDomainDefParse (domain_conf.c:21663)
by 0x51C58AE: virDomainDefParseFile (domain_conf.c:21688)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
nodinfotest.c doesn't exist anymore
seclabeltest.c has changed substantially since this behavior was
added to the spec, and in my testing doesn't have any problems
running in mock
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The open-coded version does not take much more space and additionally we
get rid of the hidden goto.
This also requires us to remove the 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The bulk stats functions are specific as they pass around the list into
many sub-functions and also a substantial amount of the entries uses
formatted names for indexing purposes. This makes them ideal to be
converted to the new virTypedParamList helpers.
Unfortunately given how the functions are used this requires a big-bang
rewrite of all of the calls to add entries to the parameter list.
Given that a substantial simplification is achieved as well as a pretty
significant change to the original code is required some macros which
were used only sporadically were replaced by inline calls rather than
tweaking the macros first and deleting them later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use QEMU_ADD_BLOCK_PARAM_ULL instead since all parameters are now
unsigned.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
None of the fields actually return negative values. The internal
implementation of BlockAcctStats struct in qemu uses uint64_t and the
last place using -1 in libvirt was in the HMP monitor code which was
deleted.
Change the internal type to unsigned long long and ensure that all
public conversions don't overflow.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a new set of helpers including a new data structure which
simplifies keeping and construction of lists of typed parameters.
The use of VIR_RESIZE_N in the virTypedParamsAdd API has performance
benefits but requires passing around 3 arguments. Use of them lead to a
set of macros with embedded jumps used in the qemu statistics code.
This patch introduces 'virTypedParamList' type which aggregates the
necessary list-keeping variables and also a new set of functions to add
new typed parameters to a list.
These new helpers use printf-like format string and arguments to format
the argument name as the stats code often uses indexed typed parameters.
The accessor function then allows extracting the typed parameter list in
the same format as virTypedParamsAdd* functions would do.
One additional benefit is also that the list function can easily be used
with VIR_AUTOPTR.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some code paths already pass in pointers to strings which should be
added directly as the value of the typed parameter. To allow more
universal use of virTypedParameterAssignValue add a flag which allows to
copy the value in place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is only used as a helper in virTypedParamsAddFromString.
Make it static and move it to virtypedparam-public.c.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is not exported in the public API thus the error
dispatching is not required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some of the typed parameter APIs are exported publicly, but the
implementation was intermixed with private functions. Introduce
virtypedparam-public.c, move all public API functions there and purge
the comments stating that some functions are public.
This will decrease the likelihood of messing up the expectations as well
as it will become more clear which of them are actually public.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Turns out, block mirror is not the only job a disk can have. It
can also do commits of one layer into the other. Or possibly some
other tricks too. Problem is that while we set seclabels on given
layers of backing chain when the job is starting (via
qemuDomainStorageSourceAccessAllow()) we don't restore them when
job finishes. This leaves XATTRs set and corresponding images
unusable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
In bc1e924cf0 we've introduced video driver name and whilst
doing so we've utilized VIR_ENUM_IMPL() macro. Then, in domain
XML parsing code the generated
virDomainVideoBackendTypeFromString() is called and its return
value is assigned directly to an unsigned int variable which is
wrong. Also, the video driver enum has 'default' value which is
not formatted into domain XML but is accepted during parsing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The check was copied from the snapshot code and makes even less sense
here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Semantically VIR_DOMAIN_START_AUTODESTROY doesn't really clash with
snapshot operations as the VM stays on the same host and thus bound to
the same connection. Saving the state also doesn't differ from modifying
the state of the VM which is allowed.
Remove the check as it doesn't make much sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Semantically we can't guarantee that we'll be able to destroy the VM on
the remote host, thus we can't allow remote migration. All other forms
of migration (e.g. saving to file) are okay though as they don't clash
with semantics of the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Apart from migrating the VM to a remote host where we can't honour the
VIR_DOMAIN_START_AUTODESTROY flag properly, restricting APIs which just
modify the state of the VM does not make much sense.
Change the wording of the documentation for VIR_DOMAIN_START_AUTODESTROY
so that snapshots and saving to a file may be permitted as they
semantically don't clash with the flag itself. Otherwise we'd have to
forbid other APIs, such as virDomainDestroy as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For each vhost-user GPUs,
- build a socket chardev, and pass the vhost-user socket to it
- build a vhost-user video device and associate it with the chardev
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Each vhost-user-gpu needs its own helper gpu process.
Start/stop them, and apply the emulator cgroup controller.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Call qemuExtVhostUserGPUPrepareDomain() to fill the domain with the
location of the vhost-user binary to start.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Learn to override the paths to the program to execute (vhost-user
helpers are executed to check for runtime capabilities).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Similar to the qemu_tpm.c, add a unit with a few functions to
start/stop and setup the cgroup of the external vhost-user-gpu
process. See function documentation.
The vhost-user connection fd is set on qemuDomainVideoPrivate struct.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Add qemuVhostUserFetchConfigs() to discover vhost-user helpers.
qemuVhostUserFillDomainGPU() will find the first matching GPU helper
with the required capabilities and set the associated
vhost_user_binary.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
vhost-user device doesn't have a virgl option, it is passed to the
vhost-user-gpu helper process instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Check qemu capability, and accept 3d acceleration. 3d acceleration
support is checked when looking for a suitable vhost-user helper.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
To support virtio VGA with vhost-user, vhost-user-vga device is necessary.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
vhost-user-gpu helper takes --render-node option to specify on which
GPU should the renderning be done.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Accept a new driver name attribute to specify usage of helper process, ex:
<video>
<driver name='vhostuser'/>
<model type='virtio'/>
</video>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The same config files disovery & priority rules are used for
vhost-user backends.
No functional change, the only difference is that
qemuInteropFetchConfigs() takes a "name" argument and construct paths
with it (ex: "firmware").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Python3 versions less than 3.7 have very unhelpful handling
of the C locale where they assume data is 7-bit only. This
violates POSIX which requires the C locale to be 8-bit clean.
Python3 >= 3.7 now assumes that the C locale is always UTF-8.
Set env variables to force LC_CTYPE to en_US.UTF-8 so that
we get UTF-8 handling on all python versions. Note we do
not use C.UTF-8 since not all C libraries support that.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The filename match rule was accidentally excluding the
Makefile.inc.am files from the long lines check.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 7efe930ec3 introduced interlock of snapshots and checkpoints,
but the check is executed prior to the snapshot API ACL check. This
means that an unauthorized user can see whether a VM exists if it has a
checkpoint.
Move the checks to proper places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit 50dfabbb59 forgot to add this important bit on how to check that
all the changes to the XML actually worked.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A common operation in qemu_domain_address is comparing a
virPCIDeviceAddress and assigning domain, bus, slot and function
to a specific value. The former can be done with the existing
virPCIDeviceAddressEqual() helper, as long as we provide
a virPCIDeviceAddress to compare it to.
The later can be done by direct assignment of the now existing
virPCIDeviceAddress struct. The defined values of domain, bus,
slot and function will be assigned to info->addr.pci, the other
values are zeroed (which happens to be their default values too).
It's also worth noticing that all these assignments are being
conditioned by virDeviceInfoPCIAddressIsPresent() calls, thus it's
sensible to discard any non-zero values that might happen to exist
in @cont->info.addr, if we settled beforehand that @cont->info.addr
is not present or bogus.
Suggested-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
A few 'cleanup' labels gone after using VIR_AUTOFREE() on the
@addrStr variable.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When the bridge re-attach handling was moved out of the network driver
and into the hypervisor driver (commit b806a60e) as a part of the
refactor to split the network driver into a separate daemon, the check
was accidentally changed to only check for type='bridge'. The check for
type in this case needs to check for type='network' as well.
(at the time we thought that the two types could be conflated for
interface actual type, but this turned out to be too problematic to
do).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This fixes
commit b7ed8ce981
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Jul 4 12:33:23 2019 +0100
remote: introduce virtproxyd daemon to handle IP connectivity
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The gnulib 'func' modules provides portability to compilers which lack
the '__func__' symbol. We only care about GCC and CLang compilers so do
not need this compatibility code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We removed use of the secure_getenv recently in
commit 2b0d597670
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Aug 1 13:35:56 2019 +0100
util: get rid of virGetEnv{Allow,Block}SUID functions
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the function directly rather than having a wrapper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Call to qemuMonitorJSONHumanCommand directly from
qemuMonitorArbitraryCommand.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We don't need to escape the commands any more since we use QMP
passthrough, which means we can delete the functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Historically HMP commands needed to be escaped to work properly.
The backdoor for calling HMP commands via QMP must unescape them so that
arguments aren't messed up.
Since we now only support the QMP passthrough the escape->unescape dance
is pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The remaining HMP commands don't require fd passing so we can purge
filedescriptor passing support from qemuMonitorJSONHumanCommandWitFd and
rename it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
qemuMonitorHMPCommandWithFd is only called via qemuMonitorHMPCommand
macro, so we can remove the macro and the extra unused cruft from the
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The handlers for 'add-fd' and 'remove-fd' are unused now and riddled
with legacy cruft. Purge them.
Last use was removed in f2019083de.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The macro VIR_DELETE_ELEMENT assume that the items being deleted
have already been cleared, so we must explicitly free domain name
from the list of domains using the shared device to prevent a
memory leak.
Signed-off-by: Xu Yandong <xuyandong2@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When registering new callback for an event, the event loop timer
must be created and registered. The timer has domain event state
object as an opaque argument which must be ref()-ed but only if
the timer was being created and registered successfully. We must
not ref it every time the virObjectEventStateRegisterID() runs.
Signed-off-by: Xu Yandong <xuyandong2@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The colors are not based on the semantics of the message but rather
on the message itself. This means that the default human-perceived
semantics (red = bad, green = good) don't really apply and spotting a
color does not mean anythting.
This is amplified by the sheer amount of output which configure produces
and the fact that some of the messages have negative semantics or
additional output.
In case of any problem the user will have to go through everything
anyways as spotting a red or yellow line has 0 information value.
Here are a few examples:
1) some 'no' messages are not a problem:
checking minix/config.h presence... no
2) some 'no' messages are actually positive:
checking for special C compiler options needed for large files... no
3) in some cases a 'yes' would mean that something is broken or needs
workaround
checking whether stat file-mode macros are broken... no
checking whether wint_t is too small... no
checking whether stdint.h predates C++11... no
checking whether the inttypes.h PRIxNN macros are broken... no
checking whether clang gives bogus warnings for -Wdouble-promotion... no
checking whether gettimeofday clobbers localtime buffer... no
4) due to string match based colors extra text makes messages yellow
checking for a traditional french locale... none
checking for working nanosleep... no (mishandles large arguments)
checking for library containing gethostbyname... none required
checking whether mbrtowc handles incomplete characters... (cached) guessing yes
5) in some cases the yes/no is very context dependant
checking whether pthread_rwlock_rdlock prefers a writer to a reader... no
checking whether this build is done by a static analysis tool... no
6) detected paths to binaries and libs are yellow despite being present
checking for objdump... objdump
checking for atomic ops implementation... gcc
As of the reasons above I don't think the colorization of the configure
output helps users or developers to debug the build process and
thus is not worth the extra code or output clutter.
This reverts commit c98174ce08.
ACKed-by: Michal Prívozník <mprivozn@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The colorization based on the string itself makes little to no sense as
the semantic meaning of the color (red = bad, green = good) is not
extracted from the semantics of the message:
1) If there is some additional string a 'yes' is marked yellow:
configure: driver_modules: yes (CFLAGS='' LIBS='-ldl')
2) In some cases a 'no' is actually good:
configure: hal: no
3) Few good/recommended configuration options are still yellow:
configure: QEMU: qemu:qemu
while using 'root:root' would still be yellow.
4) fields dumping config (e.g. the warning flags line) is a giant blob
of colored text which makes little sense
configure: Warning Flags: -fno-common -W -Wabsolute-value
-Waddress -Waddress-of-packed-member -Waggressive-loop-optimizations
-Wall -Wattribute-warning -Wattributes -Wbad-function-cast
-Wbool-compare -Wbool-operation -Wbuiltin-declaration-mismatch
-Wbuiltin-macro-redefined -Wcannot-profile -Wcast-align
-Wcast-align=strict -Wcast-function-type -Wchar-subscripts -Wclobbered
-Wcomment -Wcomments -Wcoverage-mismatch -Wcpp -Wdangling-else
-Wdate-time -Wdeprecated-declarations -Wdesignated-init
-Wdiscarded-array-qualifiers -Wdiscarded-qualifiers -Wdiv-by-zero
-Wdouble-promotion -Wduplicated-cond -Wduplicate-decl-speci ...
In addition if the idea is to switch to a more usable build system it
does not make sense to clutter the current one with more code.
This reverts commit 4b3ab5d213.
ACKed-by: Michal Prívozník <mprivozn@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Use VIR_AUTO* for temporary locals and get rid of the 'cleanup' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use VIR_AUTOPTR for temporary locals and get rid of the cleanup label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Refactor functions using these two object types together with
VIR_AUTOPTR.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Clean up functions which grab and free the context to use VIR_AUTOPTR.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use VIR_AUTO* helpers to get rid of the convoluted cleanup path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add automatic cleanup for variables of xmlDoc and xmlXPathContext type
to remove the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The wrapper reports libvirt errors for the libxml2 function so that
the same does not have to be repeated over and over.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
I opted to alias the 'virDomainType' to 'virshDomain' so that it's
obvious in all cases that this is a virsh-only construct. This is also
somewhat consistent with virsh's use of 'virshDomainFree' wrapper for
the freeing function which actually accepts NULL.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Neither virThreadInitialize or virThreadOnExit do anything since we
dropped the Win32 threads impl, in favour of win-pthreads with:
commit 0240d94c36
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Jan 22 16:17:10 2014 +0000
Remove windows thread implementation in favour of pthreads
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 0cebb6422a.
This capability is not used anywhere and also it is not contained
in any release so it's safe to just remove it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fact that qemu is capable -netdev socket is not enough to
start a migratable domain. It also needs dbus-vmstate capability.
Since there are already some qemu releases which have
net-socket-dgram capability and don't have dbus-vmstate we need
to check for dbus-vmstate.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemu side is not merged in yet, so there is a chance that the
interface will change. Don't detect the capability just yet then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Replace 'sc_prohibit_semicolon_at_eol_in_python' with generic 'sc_flake8' rule
to check python code style.
Now 'sc_flake8' just check the error E703: 'statement ends with a semicolon'.
In future, we could use '--select' to introduce more rules.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Copy the declaration into the smallest blocks it's used in
and mark it as VIR_AUTOFREE.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
After [1] we got failure on attempt to copy empty string.
Before the patch empty string was copied successfuly.
Restore the original behaviour.
[1] 7d70a63b util: Improve virStrncpy() implementation
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The ports in the socket address structures returned by getaddrinfo() are
in network byte order. Convert to host byte order before returning them.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
When opening a connection to a second driver inside the daemon, we must
ensure the identity of the current user is passed across. This allows
the second daemon to perform access control checks against the real end
users, instead of against the libvirt daemon that's proxying across the
API calls.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add ability to import/export all the parameters associated with an
identity, so that they can be exposed via the public API.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We'll shortly be exposing the identity as virTypedParameter in the
public header, so it simplifies life to use that as the internal
representation too.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virIdentity getters are unusual in that they return -1 to indicate
"not found" and don't report any error. Change them to return -1 for
real errors, 0 for not found, and 1 for success.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is simpler to remove this unused method than to rewrite it using
typed parameters in the next patch.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Only expose the type safe getters/setters to other code in preparation
for changing the internal storage of data.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Remove the "UNIX" tag from the names for user name, group name,
process ID and process time, since these attributes are all usable
for non-UNIX platforms like Windows.
User ID and group ID are left with a "UNIX" tag, since there's no
equivalent on Windows. The closest equivalent concept on Windows,
SID, is a struct containing a number of integer fields, which is
commonly represented in string format instead. This would require
a separate attribute, and is left for a future exercise, since
the daemons are not currently built on Windows anyway.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When using the fine grained access control mechanism for APIs, when a
client connects to libvirtd, the latter will fetch the uid, gid, selinux
info of the remote client on the UNIX domain socket. This is then used
as the identity when checking ACLs.
With the new split daemons things are a bit more complicated. The user
can connect to virtproxyd, which in turn connects to virtqemud. When
virtqemud requests the identity over the UNIX domain socket, it will
get the identity that virtproxyd is running as, not the identity of
the real end user/application.
virproxyd knows what the real identity is, and needs to be able to
forward this information to virtqemud. The virConnectSetIdentity API
provides a mechanism for doing this. Obviously virtqemud should not
accept such identity overrides from any client, it must only honour it
from a trusted client, aka one running as the same uid/gid as itself.
The typed parameters exposed in the API are the same as those currently
supported by the internal virIdentity class, with a few small name
changes.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Most code paths prevent starting a blockjob if we already have one but
the job registering function does not do this check. While this isn't a
problem for regular cases we had a bad test case where we registered two
jobs for a single disk which leaked one of the jobs. Prevent this in the
registering function until we allow having multiple jobs per disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There were accidentally two disks with 'vdc' target with corresponding
blockjobs which made libvirt leak some references as there are not
supposed to be two blockjobs for a single disk. Fix this mess by
renaming some of the disks.
In addition the block job names also didn't correspond to the naming
convetion which also includes the disk target. Fix it as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
qemuDomainAttachNetDevice() (hotplug) previously had some of the
validation that is in qemuDomainValidateActualNetDef(), but it was
incomplete. qemuDomainChangeNet() had none of that validation, but it
is all appropriate in both cases.
This is the final piece of a previously partial resolution to
https://bugzilla.redhat.com/1502754
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The same validation should be done for both static network devices and
hotplugged devices, but they are currently inconsistent. Move all the
relevant validation from qemuBuildInterfaceCommandLine() into the new
function qemuDomainValidateActualNetDef() and call the latter from
the former.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It needs to be used by a function that only has a const pointer to
virDomainNetDef.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
AppArmorGetSecurityProcessLabel copies the VM's profile name to the
label member of virSecurityLabel struct. If the profile is not loaded,
the name is set empty before calling virStrcpy to copy it. However,
virStrcpy will fail if src is empty (0 length), causing
AppArmorGetSecurityProcessLabel to needlessly fail. Simple operations
that report security driver information will subsequently fail
virsh dominfo test
Id: 248
Name: test
...
Security model: apparmor
Security DOI: 0
error: internal error: error copying profile name
Avoid copying an empty profile name when the profile is not loaded.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To aid in troubleshooting add some debug messages wrt
bandwidth settings and networks.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We previously allowed bandwidth settings when attaching NICs
to networks with forward mode=bridge:
commit 42a92ee93d
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Nov 20 11:30:05 2018 +0000
network: add missing bandwidth limits for bridge forward type
In the case of a network with forward=bridge, which has a bridge device
listed, we are capable of setting bandwidth limits but fail to call the
function to register them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Unfortunately the wrong version of this patch was posted and
reviewed and thus it lacked the code to actually apply the
bandwidth settings to the bridge itself.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since the introduction of the virNetworkPort object, the network driver
has a persistent record of ports that have been created against the
networks. Thus the hypervisor drivers no longer communicate to the
network driver during libvirtd restart.
This change, however, meant that the connection usage counts were
no longer re-initialized during a libvirtd restart. To deal with this we
must iterate over all virNetworkPortDefPtr objects we have and invoke
the notify callback to record the connection usage count.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virTestOOMActive method was deleted in
commit 2c52ecd960
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Aug 29 13:04:07 2019 +0100
util: purge all code for testing OOM handling
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This fixes bug in
commit bbe2aa627f
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Jul 26 17:24:30 2018 +0100
conf: simplify link from hostdev back to network device
hostdevs have a link back to the original network device. This is fairly
generic accepting any type of device, however, we don't intend to make
use of this approach in future. It can thus be specialized to network
devices.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
which mistakenly deleted the assignment to the 'net' variable,
which meant we never invoked the network driver release callback
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The functions are left returning an "int" to avoid an immediate
big-bang cleanup. They'll simply never return anything other
than 0.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Only a few of the _QUIET allocation macros are used. Since we're no
longer reporting OOM as errors, we want to eliminate all the _QUIET
variants. This starts with the easy, unused, cases.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The functions are left returning an "int" to avoid an immediate
big-bang cleanup. They'll simply never return anything other
than 0, except for virInsertN which can still return an error
if the requested insertion index is out of range. Interestingly
in that case, the _QUIET function would none the less report
an error.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The OOM handling requires special build time options which we never
enable in our CI. Even once enabled the tests are incredibly slow and
typically require manual inspection of the results to weed out false
positives.
Since there was previous agreement to switch to abort on OOM in libvirt
code, there's no point continuing to keep the unused OOM testing code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNetworkPortDef config stores the 'managed' attribute
as the virTristateBool type.
The virDomainDef config stores the 'managed' attribute as
the bool type.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If the hypervisor driver has not yet created the network port, the
portid field will be "00000000-0000-0000-0000-000000000000".
If a failure occurs during early VM startup, the hypervisor driver may
none the less try to release the network port, resulting in an
undesirable warning:
2019-09-12 13:17:42.349+0000: 16544: error :
virNetworkObjLookupPort:1679 : network port not found: Network port with
UUID 00000000-0000-0000-0000-000000000000 does not exist
By checking if the portid UUID is valid, we can avoid polluting the logs
in this way.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The pci_dev->physical_function is rewritten in
virPCIGetPhysicalFunction() to a newly allocated pointer.
Therefore, we must free the old one to avoid memleak.
Signed-off-by: Jiang kun <jiang.kun2@zte.com.cn>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The LIBVIRT_RESULT function takes two or three arguments. The
first one is the name of the result (aka CHECK_NAME). It is
printed before the colon character. The rest of the arguments is
printed after the character. To produce colourized output a
couple of changes needs to be made.
Firstly, we need to print the CHECK_NAME using "echo -n" so that
the new line is not appended at the end of the message. To
achieve this, AS_MESSAGE_N function is introduced. It's a
verbatim copy of AS_MESSAGE (which is just another alias to
AC_MSG_NOTICE) except it doesn't put '\n' at the EOL.
The alias is defined at /usr/share/autoconf-*/autoconf/general.m4
and the AS_MESSAGE is then defined at
/usr/share/autoconf-2.69/m4sugar/m4sh.m4.
Secondly, the rest of the arguments are printed colourized and to
achieve that and also keep printing them into the log file the
_AS_ECHO and COLORIZE_RESULT functions need to be called.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If we're running from a TTY we can put some colors around 'yes',
'no' and other messages.
Shamelessly copied from Ruby source code and modified a bit to
comply with syntax-check.
e487959287
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There is one hack hidden here, but since this is in a test, it's
okay. In order to get a list of expected firmwares in
virFirmwarePtr form I'm using virFirmwareParseList(). But
usually, in real life scenario, this function is used only to
parse a list of UEFI images which have NVRAM split out. In other
words, this function expects ${FW}:${NVRAM} pairs. But in this
test, we also want to allow just a single path: ${FW} because
some reported firmwares are just a BIOS image really. To avoid
writing some parser function, let's just pass "NULL" as ${NVRAM}
and fix the result later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The qemuFirmwareGetSupported() function is called from qemu
driver to generate domain capabilities XML based on FW descriptor
files. However, the function currently reports only some features
from domcapabilities XML and not actual FW image paths. The paths
reported in the domcapabilities XML are still from pre-FW
descriptor era and therefore the XML might be a bit confusing.
For instance, it may say that secure boot is supported but
secboot enabled FW is not in the listed FW image paths.
To resolve this problem, change qemuFirmwareGetSupported() so
that it also returns a list of FW images (we have the list
anyway). Luckily, we already have a structure to represent a FW
image - virFirmware.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1733940
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This function is going to get some new arguments. Document the
current ones for clarity.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This function frees a _virFirmware struct. So far, it doesn't
need to be called from outside of the module, but this will
change shortly. In the light of recent VIR_DEFINE_AUTOPTR_FUNC()
additions, do the same to virFirmwareFree().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The times, when we had small CRTs are long gone. Now, in the era
of wide screens we can be more generous when it comes to aligning
the output of configure. The longest string before the colon is
'wireshark_dissector' which counts 19 characters. Therefore,
align the strings at 20.
At the same time, drop the useless result alignment. It behaves
oddly - it puts a space at the end of each "no" because of the
%-3s format we use.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
One of the advantages is that LIBVIRT_RESULT aligns the resulting
message for us.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Rewrite some parts for clarity, elaborate the meaning of some of the XML
attributes. And where necessary, distinguish that we're dealing with
two different XML documents here:
- the domainCapabilities XML, to detect the host "hypervisor"
(QEMU/KVM) capabilities, and what libvirt knows about them.
- the guest XML definition, i.e. what features a guest can use, based
on the capabilities (of QEMU and libvirt and the host) reported in
the domainCapabilities XML.
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently the RPM spec doesn't add the 'secboot'-variant OVMF binaries
(an unintentional omission, checking with Cole on #virt, OFTC) for
'x86_64' and 'ia32'. Add them.
This way, getDomainCapabilities() will report all the OVMF binaries that
are present on the system. E.g. on Fedora 29, if you only have the
edk2-ovmf-20190308stable-1.fc29.noarch package installed, then running
`virsh domcapabilities` will enumerate _both_ the OVMF binaries (instead
of just the OVMF_CODE.fd):
$> virsh getdomcapabilities
...
<loader supported='yes'>
<value>/usr/share/edk2/ovmf/OVMF_CODE.fd</value>
<value>/usr/share/edk2/ovmf/OVMF_CODE.secboot.fd</value>
...
(
Learnt this from a discussion with Michal Privoznik in this bug,
comment#2:
https://bugzilla.redhat.com/show_bug.cgi?id=1733940 -- RFE: Report
firmware (FW) paths in domainCapabilities based on FW descriptor
files
)
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The snapshot-create operation of running guests saves the live
XML and uses it to replace the active and inactive domain in
case of revert. So, the config XML is ignored by the snapshot
process. This commit changes it and adds the config XML in the
snapshot XML as the <inactiveDomain> entry.
In case of offline guest, the behavior remains the same and the
config XML is saved in the snapshot XML as <domain> entry. The
behavior of older snapshots of running guests, that don't have
the new <inactiveDomain>, remains the same too. The revert, in
this case, overrides both active and inactive domain with the
<domain> entry. So, the <inactiveDomain> in the snapshot XML is
not required to snapshot work, but it's useful to preserve the
config XML of running guests.
Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The function virDomainDefFormatInternal() has the predefined root name
"domain" to format the XML. But to save both active and inactive domain
in the snapshot XML, the new root name "inactiveDomain" was created.
So, the new function virDomainDefFormatInternalSetRootName() allows to
choose the root name of XML. The former function became a tiny wrapper
to call the new function setting the correct parameters.
Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Once we copy the domain definition from virDomainSnapshotDef, we either
need to assign it to the domain object or free it to avoid memory leaks.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Commit f10562799 introduced a regression: if reverting to a snapshot
fails early (such as when we refuse to revert to an external
snapshot), we lose track of the domain's current snapshot.
Before that patch, we were tracking the notion of the domain's current
snapshot via two means: vm->current_snapshot (which was left untouched
on early exit) and snap->def->current (which only controls what gets
written to XML to remember snapshots across libvirtd restarts). That
patch was fixing a real bug: if a revert operation failed early, later
questions from the same libvirtd did not see any change to the current
snapsthot, but restarting libvirtd would now claim there is no current
snapshot. But it fixed it in the wrong direction, in that the current
snapshot was forgotten unconditionally, rather than only when the
snapshot to revert to has a chance of being useful.
It didn't help that the code after that patch had two separate spots
clearing the old notion of the current snapshot - one after
determining the snapshot to revert to was viable, the other
unconditionally on all failure exit paths. At any rate, the fix is
simple: drop the unconditional cleanup on error paths, and rely only
on the normal cleanup after early checks.
Sadly, it is not possible to test this bug in the existing
tests/virsh-snapshot, as the test driver does not have the same
prohibition against reverting to an external snapshot as the qemu
driver.
See: https://bugzilla.redhat.com/1738747
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190909205242.15406-1-eblake@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In recent commit of 3d21ff72e0 the virNetDevMacVLanTapOpen() and
virNetDevMacVLanTapSetup() functions were exported in our private
symbols. But these functions live in an #ifdef so they need a
stub implementation.
Then in 1b46566ee the virNetDevMacVLanIsMacvtap() function was
implemented but again, only for #idef and without stub.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The Perl bindings for libvirt use the test driver for unit tests. This
tries to load the cpu_map/index.xml file, and when run from an
uninstalled build will fail.
The problem is that virFileActivateDirOverride is called by our various
binaries like libvirtd, virsh, but is not called when a 3rd party app
uses libvirt.so
To deal with this we allow the LIBVIRT_DIR_OVERRIDE=1 env variable to be
set and make virInitialize look for this. The 'run' script will set it,
so now build using this script to run against an uninstalled tree we
will correctly resolve files to the source tree.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only caller for which this check makes sense is virDomainDefParse.
Thus the check should be moved there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit 39dded7bb6.
This commit broke virpolkittest on Ubuntu 18 which has an old
dbus (v1.12.2). Any other distro with the recent one works
(v1.12.16) which hints its a bug in dbus somewhere. Revert the
commit to stop tickling it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
There are two 'cleanup' labels - one in
virQEMUDriverConfigHugeTLBFSInit() and the other in
virQEMUDriverConfigSetDefaults() that do nothing more than
return and integer value. No memory freeing or anything important
is done there. Drop them in favour of returning immediately.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Our naming rules prefer qemuObjectOperation() scheme rather than
qemuOperationObject() for function names. These were not honoured
in recent commits to qemu_conf.c.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Traditionally, macvtap devices are supported using <interface
type='direct'>, but that type requires specifying a source device name
and macvtap mode which can't be altered after the initial device
creation (and may not even be available to the management software
that's creating the XML config to feed to libvirt).
But the attributes in the <source> are essentially describing how the
device will be connected to the network, and if libvirt is to be
supplied with the name of a macvtap device that has already been
created, that device will also already be connected to the network
(and the connection can't be changed). Thus it seems more appropriate
to use type='ethernet', which was created explicitly for this purpose
- for devices that have already been (or will be) connected to the
external network by someone/something outside of libvirt. The fact
that it is a *macv*tap rather than a contentional tap device is just a
detail.
This patch supports using an existing macvtap device with <interface
type='ethernet'> by checking the supplied target dev name to see if it
is a macvtap device and, when this is the case, calling
virNetDevMacVLanTapOpen() instead of virNetDevTapCreate(). For
consistency, this is only done when target managed='no'.
Resolves: https://bugzilla.redhat.com/1723367 (partially)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If managed='no', then the tap device must already exist, and setting
of MAC address and online status (IFF_UP) is skipped.
NB: we still set IFF_VNET_HDR and IFF_MULTI_QUEUE as appropriate,
because those bits must be properly set in the TUNSETIFF we use to set
the tap device name of the handle we've opened - if IFF_VNET_HDR has
not been set and we set it the request will be honored even when
running libvirtd unprivileged; if IFF_MULTI_QUEUE is requested to be
different than how it was created, that will result in an error from
the kernel. This means that you don't need to pay attention to
IFF_VNET_HDR when creating the tap devices, but you *do* need to set
IFF_MULTI_QUEUE if you're going to use multiple queues for your tap
device.
NB2: /dev/vhost-net normally has permissions 600, so it can't be
opened by an unprivileged process. This would normally cause a warning
message when using a virtio net device from an unprivileged
libvirtd. I've found that setting the permissions for /dev/vhost-net
permits unprivileged libvirtd to use vhost-net for virtio devices, but
have no idea what sort of security implications that has. I haven't
changed libvrit's code to avoid *attempting* to open /dev/vhost-net -
if you are concerned about the security of opening up permissions of
/dev/vhost-net (probably a good idea at least until we ask someone who
knows about the code) then add <driver name='qemu'/> to the interface
definition and you'll avoid the warning message.
Note that virNetDevTapCreate() is the correct function to call in the
case of an existing device, because the same ioctl() that creates a
new tap device will also open an existing tap device.
Resolves: https://bugzilla.redhat.com/1723367 (partially)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Although <interface type='ethernet'> has always been able to use an
existing tap device, this is just a coincidence due to the fact that
the same ioctl is used to create a new tap device or get a handle to
an existing device.
Even then, once we have the handle to the device, we still insist on
doing extra setup to it (setting the MAC address and IFF_UP). That
*might* be okay if libvirtd is running as a privileged process, but if
libvirtd is running as an unprivileged user, those attempted
modifications to the tap device will fail (yes, even if the tap is set
to be owned by the user running libvirtd). We could avoid this if we
knew that the device already existed, but as stated above, an existing
device and new device are both accessed in the same manner, and
anyway, we need to preserve existing behavior for those who are
already using pre-existing devices with privileged libvirtd (and
allowing/expecting libvirt to configure the pre-existing device).
In order to cleanly support the idea of using a pre-existing and
pre-configured tap device, this patch introduces a new optional
attribute "managed" for the interface <target> element. This
attribute is only valid for <interface type='ethernet'> (since all
other interface types have mandatory config that doesn't apply in the
case where we expect the tap device to be setup before we
get it). The syntax would look something like this:
<interface type='ethernet'>
<target dev='mytap0' managed='no'/>
...
</interface>
This patch just adds managed to the grammar and parser for <target>,
but has no functionality behind it.
(NB: when managed='no' (the default when not specified is 'yes'), the
target dev is always a name explicitly provided, so we don't
auto-remove it from the config just because it starts with "vnet"
(VIR_NET_GENERATED_TAP_PREFIX); this makes it possible to use the
same pattern of names that libvirt itself uses when it automatically
creates the tap devices.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will simplify addition of another attribute to the <target> element
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This just moves around a few things in qemuInterfaceConnect() with no
functional difference (except that a few failures that would have
previously resulted in a "success" audit log will now properly produce
a "fail" audit). The change is so that adding support for unmanaged
tap/macvtap devices will be more easily reviewable.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In virNetDevMacVLanOpen(), The "retries" arg has been removed and the
value hardcoded as 10, since previously the function was only called
from one place, so it was always 10.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This function returns T if the given name is a macvtap device. This is
determined by 1) getting the ifindex of the device with that name (if
there is one), and 2) checking for existence of /dev/tapXX, where "XX"
is the ifindex learned in (1).
It's also possible to learn this by getting a netlink dump of the
interface and parsing through it to look for some attributes, but that
is complicated to figure out, takes longer to execute, and I'm lazy.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are already good number of test cases with hostdevices,
few have multifunction devices but none having more than one
than one multifunction cards.
This patch adds a case where there are two multifunction cards
and two Virtual functions part of the same XML.
0001:01:00.X & 0005:09:00.X - are Multifunction PCI cards.
0000:06:12.[5|6] - are SRIOV Virtual functions
Future commits will improve on automatically detecting the
multifunction cards and auto-assinging the addresses
appropriately.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Previous patch had to add '/sys/kernel/' prefix in opendir() because
the path, which is being mocked, wasn't being considered due to
an 'if SYSFS_PCI_PREFIX' guarding the call to getrealpath().
In fact, all current getrealpath() callers are guarding it with a
conditional to ensure that the function will never be called with
a non-mocked path. In this case, an extra non-NULL verification is
needed for the 'newpath' string to use the variable - which is
counterintuitive, given that getrealpath() will always write the
'newpath' string in any non-error conditon.
However, simply removing the guard of all getrealpath() instances
causes an abort in init_env(). This happens because tests will
execute access() to non-mocked paths even before the
LIBVIRT_FAKE_ROOT_DIR variable is declared in the test files. We
don't need 'fakerootdir' to be created at this point though.
This patch does the following changes to simplify getrealpath()
usage:
- getrealpath() will now guard the init_env() call by checking if
both fakeroot isn't created and the required path is being mocked.
This ensures that we're not failing inside init_env() because
we're too early and LIBVIRT_FAKE_ROOT_DIR wasn't defined yet;
- remove all conditional guards to call getrealpath() from
access(), virMockStatRedirect(), open(), open_2(), opendir()
and virFileCanonicalizePath(). As a bonus, remove all ternary
conditionals with 'newpath';
- a new 'pathPrefixIsMocked()' helper to aggregate all the prefixes
we're mocking, making it easier to add/remove them. If a prefix
is added inside this function, we can be sure that all functions
are mocking them.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds hostdev test cases in qemuhotplugtest.c.
Note: the small tweak inside virpcimock.c was needed because
the new tests added a code path in which virHostHasIOMMU()
(virutil.c) started being called, and the mocked '/sys/kernel/'
prefix that is mocked in virpcimock.c wasn't being considered
in the opendir() mock. An alternative to avoid these situations
in virpcimock.c is implemented in the next patch.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The softlink to physfn is the way to know if the device is
VF or not. So, the patch softlinks 'physfn' to the parent function.
The multifunction PCI devices dont have 'physfn' softlinks.
The patch adds few Virtual functions to the mock environment and
changes the existing VFIO test xmls using the VFs to use the newly
added VFs for their use case.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds mock of the /dev/vfio path, needed for proper
implementation of the support for multifunction/multiple devices
per iommu groups.
To do that, the existing bind and unbind operations were adapted
to operate with the mocked filesystem as well.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting a domain, we use the presence of a vfio-pci or
mdev hostdev to determine if the memlock maximum needs to be
increased. But if we hotplug either of these devices, only the
vfio-pci path gets that love. This means that attaching a, say,
vfio-ccw device will appear to succeed but the device may be
unusable as the guest may see I/O errors on long CCW chains.
The host, meanwhile, would be flooded with these messages:
vfio_pin_page_external: Task qemu-system-s39 (11584) RLIMIT_MEMLOCK (65536) exceeded
Let's adjust the maximum memlock value in the mdev hotplug path,
so that the domain has the same value as if it were started with
one or more mdev devices in its configuration.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If attaching a PCI hostdev fails, there are several things that
need to be un-done as part of the cleanup. One thing that is
not done is re-calculating/re-setting the maximum amount of locked
memory for the domain, since we may have changed that.
Let's fix that, just to ensure everything is back the way it was.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Let's pull this hunk out into a function, so it can be reused
in another codepath that needs to do the same thing.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In f08e6883cb I've made @pcidevs in
virHostdevReAttachPCIDevices() to be automatically unrefed using
VIR_AUTOUNREF() but I forgot to remove the line that explicitly
unrefs the object at the end of the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We currently generate two completely separate API references for the
libvirt public API. One at 'docs/html/' and one at 'docs/devhelp/'.
Both are published on the website, but we only link to content in
the 'docs/html/' pages.
Both are installed in the libvirt-docs sub-RPM, with a full copy
of the website including 'docs/html/' in /usr/share/docs/libvirt-docs,
while the 'docs/devhelp/' content goes to /usr/share/gtk-doc/. The
latter was broken for years until:
commit ca6f602546
Author: Andrea Bolognani <abologna@redhat.com>
Date: Fri May 10 14:54:52 2019 +0200
docs: Introduce $(devhelphtml_generated)
Our XSLT magic generates one Devhelp-compatible HTML file
per documentation module, but so far we have only shipped
and installed documentation for virterror.
Now that we have $(modules), however, we can generate the
list of files the same way we do for regular documentation
and make sure we always ship and install everything.
That this bug went unnoticed for so long is a sign of how few
people are using the devhelp docs. The only commits to the devhelp
code since it was first introduced have been fixing various build
problems that hit.
The only obvious difference between the two sets of docs is the CSS
styling in use. Overall devhelp does not look compelling enough to
justify having two duplicated sets of API docs. Eliminating it will
reduce the amount of XSL code we are carrying in the tree which is
an attractive benefit.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
After the previous commits, qemuAddSharedDevice() and
qemuRemoveSharedDevice() are now the same code with a different
flag to call the internal functions.
This patch aggregates the common code into a new function called
qemuAddRemoveSharedDeviceInternal() to further reduce
code repetition. Both qemuAddSharedDevice() and
qemuRemoveSharedDevice() are kept since they are public
functions used elsewhere.
No functional change was made.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Following the same idea of avoid code repetition from the
previous patch, this commit introduces a new function that
aggregates the functions of qemuAddSharedDisk() and
qemuRemoveSharedDisk() into a single place, using a flag to
switch between add/remove operations.
Both qemuAddSharedDisk() and qemuRemoveSharedDisk() are
public, so keep them around to avoid changing other files
due to an internal qemu_conf.c refactory.
No functional change was made.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
qemuAddSharedHostdev() has a code similar to
qemuRemoveSharedHostdev(), with exception of one line that
defines the operation (add or remove).
This patch introduces a new function that aggregates the common
code, using a flag to switch between the operations, avoiding
code repetition.
No functional change was made.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Since commit fd9ef3b31e, virDomainFindByUUIDRef() no longer exists and
all virDomainObjListFindBy*() functions now increment the reference
count.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
As a result of changes in
commit d5f0c1b6dd
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Jul 18 12:30:22 2019 +0100
remote: stop trying to print help as giant blocks of text
The socket path built would be libvirt//var/run/libvirt-sock
instead of /var/run/libvirt/libvirt-sock. Fortunately this only
affects users who have set the 'unix_sock_dir' config parameter
in /etc/libvirt/libvirtd.conf, which is pretty rare/unusual.
Signed-off-by: eater <=@eater.me>
Exception made for the psuedonym above since patch is considered
trivial & thus non-copyrightable material.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In some places where virDomainObjListForEach() is called the
passed callback calls virDomainObjListRemoveLocked(). Well, this
is unsafe, because the former only grabs a read lock but the
latter modifies the list.
I've identified the following unsafe calls:
- qemuProcessReconnectAll()
- libxlReconnectDomains()
The rest seem to be safe.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virDomainObjCheckActive() returns -1 if domain is not active, not 0.
Fixes cb50436c6f "libxl: implement virDomainPM* functions"
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
This is an issue for LXC loop devices when you are trying to get loop
devices info using `ioctl`. Modern apps uses `/sys/dev/block` to grab
information about devices, but if you use the method mention you won't
be able to retrive the associated file with that loop device. See
example below from cryptsetup sources:
static char *_ioctl_backing_file(const char *loop)
{
struct loop_info64 lo64 = {0};
int loop_fd;
loop_fd = open(loop, O_RDONLY);
if (loop_fd < 0)
return NULL;
if (ioctl(loop_fd, LOOP_GET_STATUS64, &lo64) < 0) {
close(loop_fd);
return NULL;
}
lo64.lo_file_name[LO_NAME_SIZE-2] = '*';
lo64.lo_file_name[LO_NAME_SIZE-1] = 0;
close(loop_fd);
return strdup((char*)lo64.lo_file_name);
}
It will return an empty string because lo_file_name was not set.
Function `virFileLoopDeviceOpenSearch()` is using `ioctl` to query data,
but it is not checking `lo_file_name` field.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
When the network interface is of "user" type, and QEMU has the "-net
socket,fd=" datagram support, call qemuInterfacePrepareSlirp() to
probe and associate a slirp-helper with the interface.
The usage of automated slirp-helper can be prevented with
disableSlirp (in particular when resuming a
VM that didn't start with slirp-helper before).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If a slirp-helper is associated with a network interface (after
probing & preparing succesfully), pass the socket fd to QEMU and use
"-net socket,fd=".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If a slirp-helper is associated with a network interface,
prepare/start/stop the process via qemu-extdevice.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For VM started and migrated/saved without slirp-helpers, let's prevent
the automatic setup (as it would fail to migrate otherwise).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Save & restore the slirp helper PID associated with a network
interface & the probed features.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The unit provides the functions associated with a slirp-helper:
- probing / checking capabilities
- opening the socketpair
- starting / stoping the helper
- registering for dbus-vmstate migration
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add dbusVMStates to keep a list of dbus-vmstate objects needed for
migration. They are populated on the command line during start or
qemuDBusVMStateAdd/Remove() will hotplug them as needed.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
pid filenames (from swtpm and other helpers from this series) are
based on VM shortname, which is derived from VM id. If the id is reset
to early, the state filenames will not be found.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This object is being proposed to qemu upstream "Add dbus-vmstate
object". It handles data migration of external processes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Datagram socket is available since qemu 4.0, commit
fdec16e3c2a614e2861f3086b05d444b5d8c3406 ("net/socket: learn to talk
with a unix dgram socket").
Required for slirp-helper communication.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Once QEMU is started, the qemuDomainLogContext is owned by it, and can
no longer be used from libvirt. Instead, use
qemuDomainLogAppendMessage() which will redirect the log.
This is not strictly necessary for swtpm, but the following patches
are going to reuse qemuExtDeviceLogCommand().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
dbus_message_new() does not construct correct replies by itself, it is
recommended to use dbus_message_new_method_return() instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is failing, because it ends up being parsed with version='default'
and expects '1.2' instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Implicitly the query depth is limited by the length of the QAPI schema
query, but 'alternate' and 'array' QAPI meta-types don't consume a part
of the query string thus a loop on such types would get our traversal
code stuck in an infinite loop. Prevent this from happening by limiting
the nesting depth to 1000.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
After parsing a video device with a model type of
VIR_DOMAIN_VIDEO_TYPE_NONE, all device info is cleared (see
virDomainDefPostParseVideo()) in order to avoid formatting any
auto-generated values for the XML. Subsequently, however, an alias is
generated for the video device (e.g. 'video0'), which results in an
alias property being formatted in the XML output anyway. This creates
confusion if the user has explicitly provided an alias for the video
device since the alias will change.
To avoid this, don't clear the user-defined alias for video devices of
type "none".
https://bugzilla.redhat.com/show_bug.cgi?id=1720612
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When we set cpu.max period we need to parse the cpu.max file first as
it contains both quota and period values separated by space. When only
a single number is written to that file it will set quota. However,
in order to change period we need to write both values.
The code was prepared for that but mistakenly used new line to end the
string with the first value.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1749227
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When blockdev is used we always should use the blockdev mode for
non-shared storage migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Remove libvirt's support check for the target of an external snapshot to
the blockdev code or qemu. This will potentially require a more complex
cleanup but removes a level of hardcoded feature checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the code for creating or attaching new storage source in the
snapshot code and switch to 'blockdev-snapshot' for creating the
snapshot itself.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With blockdev we'll be able to support protocols which are not supported
by the storage backends in libvirt. This means that we have to be able
to skip the creation and relative storage path reading if it's not
supported. This will make it impossible to use relative backing for
network protocols but that would be almost insane anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After we always assume support for the 'transaction' command
(c358adc571) and follow-up cleanups
qemuDomainSnapshotCreateSingleDiskActive lost its value. Move the code
into appropriate helpers and remove the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix and unify the naming of external snapshot preparation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make qemuDomainSnapshotDiskDataCleanup cleanup section friendly by
moving the error preservation code inside it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We changed to always saving the status and config XMLs to simplify
code. After a few more refactors it's now possible to move it to the
appropriate place and save the XMLs only on success again.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When we take a snapshot we must properly remove our locking
infrastructure locks. This was broken by commit 3817fa10c4 which
attempted to properly track the readonly state for the image as the
locking code was executed after this change. Since we forced the image
which was locked as read-write to read-only prior to unlocking it the
write lock was not dropped.
Fix it by moving the locking code prior to modifying the readonly flag.
https://bugzilla.redhat.com/show_bug.cgi?id=1745618
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code preparing data for creating/attaching the target image of block
copy didn't use the correct reference to the existing backing chain in
case when the copy should inherit it. This meant that qemu actually
opened a second copy of the chain and operated on that.
This would de-sync qemu from libvirt's view of node names. Luckily this
is only hypothetical at this point since it happens only when -blockdev
is enabled.
Fix it by passing 'mirrorBacking' which has the proper data as the
backing store when calling
qemuBuildStorageSourceChainAttachPrepareBlockdevTop.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In some cases we'll need to pass in a backing store which is not
recorded as the backing store of @src. Export backingStore as variable
and fix all callers to pass in the backing store. No semantic changes
for now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass backing store as an argument rather than extracting it locally and
fix the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the loop and supporting infrastructure to the caller as only one
of the two callers actually cares about looping and rename the helper to
qemuBuildStorageSourceChainAttachPrepareBlockdevOne.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass in backing store explicitly to qemuBlockStorageSourceGetBlockdevProps
and fix the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move all bits of the formatting of the 'backing' attribute to a single
condition and make it use a single extracted copy of the backing store.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since libvirt stores the backing chain into the XML in a nested way it
is the prime possibility to hit libxml2's parsing limit of 256 layers.
Introduce code which will crawl the backing chain and verify that it's
not too deep. The maximum nesting is set to 200 layers so that there's
still some space left for additional properties or nesting into snapshot
XMLs.
The check is applied to all disk use cases (starting, hotplug, media
change) as well as block copy which changes image and snapshots.
We simply report an error and refuse the operation.
Without this check a restart of libvirtd would result in the status XML
failing to be parsed and thus losing the VM.
https://bugzilla.redhat.com/show_bug.cgi?id=1524278
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When virtlogd is used to capture QEMU's stdout, qemuDomainObjTaint would
always fail to write the message to the log file when QEMU is already
running (i.e., outside qemuProcessLaunch). This can happen during device
hotplug or by sending a custom QEMU guest agent command:
warning : qemuDomainObjTaint:8757 : Domain id=9 name='blaf'
uuid=9cfa4e37-2930-405b-bcb4-faac1829dad8 is tainted:
custom-ga-command
error : virLogHandlerDomainOpenLogFile:388 : Cannot open log file:
'/var/log/libvirt/qemu/blaf.log': Device or resource busy
error : virNetClientProgramDispatchError:172 : Cannot open log file:
'/var/log/libvirt/qemu/blaf.log': Device or resource busy
The fix is easy, we just need to use the right API for appending a
message to QEMU log file instead of creating a new log context.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'u' modifier creates an unsigned int JSON attribute but the disk size
and capacity fields are unsigned long long. If the size of the created
image would be more than 4GiB we'd overflow and create sub-4G image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The xenapi driver has not seen any development since its initial
contribution 9 years ago. There have been no bug reports, no patches,
and no queries about the driver on the developer or user mailing lists.
Remove the driver from the libvirt sources.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A specially crafted XML which would reference a non-existing disk but
request the mirror to be registered with the blockjob could potentially
make the parser dereference NULL. Fix it by moving the code slightly and
just treat it as a wrong job XML. Found by Coverity.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The (pre-copy) bandwidth was historically the only bandwidth we
supported and thus it is called just "bandwidth" in all other places.
E.g., virsh migrate-setspeed or in the migration typed parameter name.
Let's make the new option for virsh migrate consistent.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The (pre-copy) bandwidth was historically the only bandwidth we
supported and thus it is called just "bandwidth" in all other places.
E.g., virsh migrate-setspeed or in the migration typed parameter name.
Let's make the new option for virsh migrate consistent.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If a block job reaches failed/cancelled state, or is completed
without pivot then we must remove security driver metadata
associated to the backing chain so that we don't leave any
metadata behind.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1741456
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
When a block job is completed, the security image metadata are
moved to the new image. If this fails an warning is printed, but
the message contains only domain name and lacks image paths. Put
them both into the warning message.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Currently, there are only a few lines of code so a separate
function was not necessary, but this will change. So instead of
putting all the new code under 'case
QEMU_BLOCKJOB_TYPE_ACTIVE_COMMIT' create a separate function.
Just like every other case has one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
I guess the reason for that was the automatic interpretation/stringification of
setfilecon_errno, but the code was not nice to read and it was a bit confusing.
Also, the logs and error states get cleaner this way.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Coverity noted that 'reply' can be NULL after calling
qemuAgentCommand(). Avoid dereferencing reply in
qemuAgentErrorComandUnsupported() in that case.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Introduced by commit <c854e0bd33c7a5afb04a36465bf04f861b2efef5> that
tried to fix an issue where we would fail to parse values from files.
We cannot change the original pointer that is going to be used by
VIR_AUTOFREE.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1747440
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
'virQEMUDriverConfigPtr cfg' is declared, initiated, but never
used in virQEMUDriverCreateCapabilities().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
There are some network file systems that do support XATTRs (e.g.
gluster via FUSE). And they appear to support SELinux too.
However, not really. Problem is, that it is impossible to change
SELinux label of a file stored there, and yet we claim success
(rightfully - hypervisor succeeds in opening the file). But this
creates a problem for us - from XATTR bookkeeping POV, we haven't
changed the label and thus if we remembered any label, we must
roll back and remove it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1740506
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This function is no longer needed because after previous commits
it's just an alias to virSecuritySELinuxSetFilecon.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Now, that we don't need to remember if setting context is
'optional' (the argument only made
virSecuritySELinuxSetFileconImpl() return a different success
code), we can drop it from the _virSecuritySELinuxContextItem
structure as we don't need to remember it in transactions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There is no real difference between
virSecuritySELinuxSetFilecon() and
virSecuritySELinuxSetFileconOptional(). Drop the latter in favour
of the former.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The only thing that the @optional argument does is that it makes
the function return 1 instead of 0 if setting SELinux context
failed in a non-critical fashion. Drop the argument then and
return 1 in that case. This enables caller to learn if SELinux
context was set or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
As qemu documents we should use everything in the 'props' sub-object of
the data returned by query-hotpluggable-cpus. Until now we only used
everything we recognized, but that may break in cases when qemu
introduces new fields.
This change requires a fix to the test data as some fields were
reordered.
https://bugzilla.redhat.com/show_bug.cgi?id=1741658
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
In addition to the data that libvirt needs and extracts internally,
copy and store the whole 'props' JSON sub-object of the data returned by
query-hotpluggable-cpus for future use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
On error paths, info_ret could potentially leak. Make sure it's freed.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
After 7cfb7aab57 commit starting a domain pullutes logs with
warnings like [1]. The reason is resource files do not
have timestamp before starting a domain and after destroying
domain the timestamp is cleared. Let's check the timestamp
only if attribute with refcounter is found.
[1] warning : virSecurityValidateTimestamp:198 : Invalid XATTR timestamp detected on \
/some/path secdriver=dac
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It appears that all commands were originally fully in alphabetical order
but as new commands were added, they were sometimes inserted out of
order. Fix up all domain commands so that they're in alphabetical order
again.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'guestinfo' command uses the new virDomainGetGuestInfo() API to
query information about the specified domain and print it out for the
user. The output is modeled roughly on the 'domstats' command.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When we're collecting guest information, older agents may not support
all agent commands. In the case where the user requested all info
types (i.e. types == 0), ignore unsupported command errors and gather as
much information as possible. If the agent command failed for some other
reason, or if the user explciitly requested a specific info type (i.e.
types != 0), abort on the first error.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Due to a typo, some of the field names didn't have closing quotes,
the information about the hostname was omitted and there was an
empty line missing after filesystem info description (which helps
our docs generator produce better looking HTML).
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
According to HTML specification, <a name=''> works in HTML4, but
<a id=''> works in both HTML4 and HTML5. This is followed even in
docs/page.xsl where HTML bookmark links are generated only for
those anchors which have @id attribute.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
At two places we are open coding xdr_free():
remoteRelayDomainEventTunable() and
remoteRelayDomainEventJobCompleted().
Bot of these functions use make_nonnull_domain() to put domain
IDs tuple into return structure and then continue encoding the
rest of structure. If that fails, they call VIR_FREE() directly.
While this okay, we should use xdr_free() which frees the whole
return structure for us.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If there's a problem in encoding @ret (for instance
virTypedParamsSerialize() fails) then @ret is leaked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The same way we check for limits when decoding typed parameters
(virTypedParamsDeserialize()) we should do the same check when
serializing them so that we don't put onto the wire more than our
limits allow. Surprisingly, we were doing so explicitly in some
places but not all of them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The return structure is a bit complicated and that's why it is
very easy to check for RPC limits incorrectly. The structure is
an array of remote_domain_stats_record structures with the limit
of REMOTE_DOMAIN_LIST_MAX. The latter structure then poses a
different limit on typed params:
REMOTE_CONNECT_GET_ALL_DOMAIN_STATS_MAX (which is what we are
checking for mistakenly).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Commit f15789ec added support for setting postcopy migration bandwidth to
the migrate subcommand. This change does the same for precopy migration.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If a libvirt error occurred during a test, then virTestRun()
reports it (regardless of test returning success or failure).
For instance, in this specific case, a hostdev is detached twice
and the second attempt is expected to fail. It does fail and
libvirt error is reported which is then printed onto stderr.
Insert virResetLastError() calls on appropriate places to avoid
that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In this test there is this macro CHECK_LIST_COUNT() which checks
if a list of PCI devices contains expected count. If it doesn't
an error is reported and 'goto cleanup' is invoked. There's no
real reason for that as even since its introduction there is no
cleanup done and all 'cleanup' labels contain nothing but
'return'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are few functions called from the test which return an
integer but their retval is compared as if it was a pointer.
Now, there is nothing wrong with that from machine POV, but
from readability perspective it's wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the previous commit, VIR_TEST_VERBOSE should put
'\n' at the end of each call so that the output is not broken.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is an inconsistency with VIR_TEST_DEBUG() calls. One half
(roughly) of calls does have the newline character the other one
doesn't. Well, it doesn't have it because it assumed blindly that
new line will be printed, which is not the case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in v3.0.0-rc1~336, the commit message doesn't really
justifies the expensive domain def copy creation. Now, that
vm->def is guarded in this function by job acquirement we can use
vm->def directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These two functions work with vm->def in their critical sections
(i.e. after the job was acquired and before it is released). But
that means, they need QUERY domain job too to prevent vm->def
change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The remote client invokes the 'nc' binary on the remote server to tunnel
access to the socket. As such the 'nc' binary needs to be pulled in only
by the libvirt-daemon sub-RPM, not the libvirt-client sub-RPM.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'nc' RPM does not in fact exist anymore, this is a virtual provide
from the nmap-ncat RPM which the maintainer wishes to delete. Change the
dep to use the actual binary path we want to invoke.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently during RPM upgrade we restart libvirtd and unconditionally
enable use of systemd socket activation for the UNIX sockets.
If the user had previously given the --listen arg to libvirtd though,
this will no longer be honoured if socket activation is used.
We could start libvirtd-tcp.socket or libvirtd-tls.socket for this,
but mgmt tools like puppet/ansible might not be expecting this.
So for now we silently disable socket activation if we see --listen
was previously set on the host.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When using systemd socket activation the --listen arg has no
effect. This is confusing to users upgrading from previous versions of
libvirt as their config is silently ignored. Turn use of --listen into a
fatal error when sockets are passed from systemd.
This helps the admin discover the change in behaviour and thus decide
whether to stick with socket activation or revert to previous behaviour.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We need to give users the ability to customize the length of the
shutdown timeout, or even disable timeouts entirely. Thus we must move
the timeout arg into the sysconf file, instead of the service unit.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To facilitate upgrades from earlier versions of libvirt which did not
use socket activation for libvirtd, we want to allow the libvirtd socket
units to be disabled (masked). This can only be supported if we use the
weaker Wants statement instead of Requires.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the %{_rundir} RPM variable to set the configure runstatedir
variable to /run.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Many distros have moved /var/run to /run with the introduction of
systemd. /var/run still exists as a symlink to /run, but its usage
is deprecated.
autoconf added a --runstatedir option back in 2013 but there's still no
new release of autoconf that includes this.
gnulib meanwhile added support to propagate this arg's value to
configmake.h, but it falls back to $localstatedir/run for autoconf 2.69
and older, which is what every distro today has.
To deal with this problem we add a --with-runstatedir arg that then sets
the $runstatedir env variable that future autoconf's --runstatedir arg
will also use. This finally enables $runstatedir to be pointed to /run.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All code using LOCALSTATEDIR "/run" is updated to use RUNSTATEDIR
instead. The exception is the remote driver client which still
uses LOCALSTATEDIR "/run". The client needs to connect to remote
machines which may not be using /run, so /var/run is more portable
due to the /var/run -> /run symlink.
Some duplicate paths in the apparmor code are also purged.
There's no functional change by default yet since both expressions
expand to the same value.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Creating various directories using $(runstatedir) instead of
$(localstatedir)/run.
There's no functional change by default yet since both expressions
expand to the same value.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If a systemd socket uses /var/run in its path, systemd prints a warning
at runtime
[ 15.139976] systemd[1]: /usr/lib/systemd/system/virtlockd.socket:5:
ListenStream= references a path below legacy directory /var/run/,
updating /var/run/libvirt/virtlockd-sock → /run/libvirt/virtlockd-sock;
please update the unit file accordingly.
This minimal change updates the socket unit files to honour the
$runstatedir path.
There's no functional change by default yet since both expressions
expand to the same value.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The recent cleanups allow us to clean up the code a bit.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
That way devstr will only be used for the device string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead of getting the string then passing it to virCommand.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use separate variables for the chardev and the device.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reduce the scope of the variable to get it freed for every controller
processed.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Simplify the code by annotating all the temporary virBuffers
with VIR_AUTOCLEAN.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After the legacy xen driver was removed the libxl driver became
the only consumer of xenconfig. Move the few files in xenconfig
to the libxl driver and remove the directory.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function adds the complete filesystem information returned by the
qemu agent to an array of typed parameters with field names intended to
to be returned by virDomainGetGuestInfo()
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Since version 3.0, qemu has returned disk usage statistics in
guest-get-fsinfo. And since 3.1, it has returned information about the
disk serial number and device node of disks that are targeted by the
filesystem.
Unfortunately, the public API virDomainGetFSInfo() returns the
filesystem info using a virDomainFSInfo struct, and due to API/ABI
guarantees it cannot be extended. So this new information cannot
easily be added to the public API. However, it is possible to add this
new filesystem information to a new virDomainGetGuestInfo() API which
will be based on typed parameters and is thus more extensible.
In order to support these two use cases, I added an internal struct
which the agent code uses to return all of the new data fields. This
internal struct can be converted to the public struct at a cost of some
extra memory allocation.
In a following commit, this additional information will be used within
virDomainGetGuestInfo().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function queries timezone information within the guest and adds
the information to an array of typed parameters with field names
intended to be returned to virDomainGetGuestInfo()
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function queries the guest operating system information and adds
the returned information to an array of typed parameters with field
names intended to be returned in virDomainGetGuestInfo().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function fetches the list of logged-in users from the qemu agent
and adds them to a list of typed parameters so that they can be used
internally in libvirt.
Also add some basic tests for the function.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This API is intended to aggregate several guest agent information
queries and is ispired by stats API virDomainListGetStats(). It is
anticipated that this information will be provided by a guest agent
running within the domain.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the internals into qemuDomainSnapshotDiskDataCollectOne to make it
obvious what's happening after moving more code here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Soon we'll allow more protocols and storage types with snapshots where
we in some cases can't check whether the storage already exists.
Restrict the sanity checks whether the destination images exist or not
for local storage where it's easy. For any other case we will fail
later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the code to avoid having a cleanup label. This will simplify
the change necessary when restricting this check in an upcoming patch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
dd->src is always allocated in this function as it contains the new
source for the snapshot which is meant to replace the disk source.
The label handling code executed if that source was not present thus is
dead code. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the VM is running the persistent source of a disk might differ
e.g. as the 'newDef' was redefined. Our snapshot code would blindly
rewrite the source of such disk if it shared the 'target'. Fix this by
checking whether the source is the same in the first place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using inline authentication for storage volumes will not work properly
as libvirt requires use of the secret driver for the auth data and
thus would not be able to represent the passwords stored in the backing
store string.
Make sure that the backing store parsers return 1 which is a sign for
the caller to not use the file in certain cases.
The test data include iscsi via a json pseudo-protocol string and URIs
with the userinfo part being present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virStorageFileGetMetadataRecurse would include files in the backing
chain which would not really be usable by libvirt directly e.g.
when such file would be promoted to the top layer by an active block
commit as for example inline authentication data can't be represented in
the VM xml file. The idea is to use secrets for this.
With the changes to the backing store string parsers we can report and
propagate if such a thing is present in the configuration and thus start
skipping those files in the backing chain traversal code. This approach
still allows to report the appropriate backing store string in the
storage driver which doesn't directly use the backing file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virStorageFileGetMetadata does not report error if we can't interrogate
the file somehow. Clarify this in the description of the @report_broken
flag as it implies we should report an error in that case. The problem
is that we don't know whether there's a problem and unfortunately just
offload it to qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce new semantics to virStorageSourceNewFromBacking and some
of the helpers used by it which propagate the return value from the
callers.
The new return value introduced by this patch allows to notify the
calller that the parsed virStorageSource correctly describes the source
but contains data such as inline authentication which libvirt does not
want to support directly. This means that such file would e.g. unusable
as a storage source (e.g. when actively commiting the overlay to it) or
would not work with blockdev.
The caller will then be able to decide whether to consider this backing
file as viable or just fall back to qemu dealing with it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify testBackingParse to allow testing other return values of the
backing store string parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Return the parsed storage source via an pointer in arguments and return
an integer from the function. Describe the semantics with a comment for
the function and adjust callers to the new semantics.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virStorageSourceParseBackingURI will report special return values in
some cases. Preserve it in virStorageSourceParseBackingJSONUriStr.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Return the storage source definition via a pointer in the arguments and
document the returned values. This will simplify the possibility to
ignore certain backing store types which are not representable by
libvirt.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Automatically clean the temporary buffer and get rid of the cleanup
label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While it's a bad idea to use userinfo to pass credentials via a URI add
a test that we at least do the correct thing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Automatically free the 'root' temporary variable to get rid of some
complexity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Automatically clean the 'uri' variable and get rid of the 'cleanup'
label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Automatically free the intermediate JSON data to get rid of the cleanup
section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit fb64e176f4 forgot to delete the check that short-circuits the
disk alias creation if the alias is already present. The side effect
of this is that the creation qomName which is necessary to be able to
refer to disk frontends when -blockdev is used was skipped when user
aliases are used.
Fix it by deleting the check. Also prevent any potential memory leaks
from calling this function repeatedly by creating the qomName only when
it's not present.
https://bugzilla.redhat.com/show_bug.cgi?id=1741838
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, whenever there's a regular EOF on the console stream
or an error the virStreamAbort() is called regardless. While this
may not actually break anything, we should call virStreamFinish()
to let the daemon know we've successfully received all the data
and are shutting down the stream gracefully.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
In my recent patches I've introduced
virStoragePoolObjIsStarting() which is then used to protect
storage pool definition when the pool object is locked and
unlocked during long running jobs. Well, my patches did not
anticipate that @obj can be NULL under 'cleanup' label in
storagePoolCreateXML() (for instance when parsing XML fails).
This imperfection is causing libvirtd to crash then.
Fixes: 13284a6b83 storage_driver: Protect pool def during startup and build
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Regular VM shutdown triggers the error for existing session of virsh
console and it returns with non-zero exit code:
error: internal error: console stream EOF
The message and status code are misleading because there's no real
error. virStreamRecv returns 0 correctly when EOF is reached.
Existing implementations of esx, fd, and remote streams behave the same
for virStreamFinish and virStreamAbort: they close the stream. So, we
can continue to use virStreamAbort to handle EOF and errors from
virStreamRecv but additonally we can report error if virStreamAbort
fails.
Fixes: 29f2b5248c ("tools: console: pass stream/fd errors to user")
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A library has to be built with -flat_namespace to get all references to
global symbols indirected. That can also be achieved with two-level
namespace interposition but we're not using explicit symbol
interposition since it's more verbose and requires massive changes to
the mocks.
This provides a way to interpose a mock for virQEMUCapsProbeHostCPU from
qemucpumock and fixes domaincapstest on macOS.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
gnulib headers change stat, lstat and open to replacement functions,
even for function definitions. This effectively disables standard
library overrides in virfilewrapper and virmockstathelpers since they
are never reached.
Rename the functions and provide a declartion that uses correct
assembler name for the mocks.
This fixes firmware lookup in domaincapstest on macOS.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Test executables and mocks have assumption that any symbol can be
replaced with LD_PRELOAD. That's not a case for macOS unless flat
namespace is used, because every external symbol reference records the
library to be looked up. And the symbols cannot be replaced unless dyld
interposing is used.
Setting DYLD_FORCE_FLAT_NAMESPACE changes symbol lookup behaviour to be
similar to Linux dynamic linker. It's more lightweight solution than
explicitly decorating all mock symbols as interpositions and building
libvirt as interposable dynamic library.
This fixes vircryptotest and allows to proceed other tests that rely on
mocks a little bit further.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
macOS syscall interface (/usr/lib/system/libsystem_kernel.dylib) has
three kinds of stat but only one of them can be used to fill
"struct stat": stat$INODE64.
virmockstathelpers looks up regular stat instead of stat$INODE64. That
causes a failure in qemufirmwaretest because "struct stat" is laid out
differently from the values returned by stat.
Introduce VIR_MOCK_REAL_INIT_ALIASED that can be used to lookup
stat$INODE64 and lstat$INODE64 and use it to setup real functions on
macOS.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
>From ld(1):
By default all references resolved to a dynamic library record the
library to which they were resolved. At runtime, dyld uses that
information to directly resolve symbols. The alternative is to use the
-flat_namespace option. With flat namespace, the library is not
recorded. At runtime, dyld will search each dynamic library in load
order when resolving symbols. This is slower, but more like how other
operating systems resolve symbols.
That fixes the set of tests that preload a mock library to replace
library symbols:
qemublocktest
qemumonitorjsontest
viriscsitest
virmacmaptest
virnetserverclienttest
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
/tmp is a symbolic link to /private/tmp on macOS. That causes failures
in commandtest, because getcwd returns /private/tmp and the expected
output doesn't match to "CWD: /tmp".
Rathern than making a copy of commanddata solely for macOS, the /private
prefix is stripped.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
macOS has two kinds of loadable libraries: MH_BUNDLE, and MH_DYLIB.
bundle is used for plugins that are loaded with dlopen/dlsym/dlclose.
And there's no way to preload a bundle into an application. dynamic
linker (dyld) will reject it when finds it in DYLD_INSERT_LIBRARIES.
Unfortunately, a bundle is built if -module flag is provided to libtool.
The flag has been removed to build dylibs with ".dylib" suffix.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
In preparation libtool "-module" flag removal, add lib prefix to all
mock shared objects.
While at it, introduce VIR_TEST_MOCK macros that makes path out of mock
name to be used with VIR_TEST_PRELOAD or VIR_TEST_MAIN_PRELOAD. That,
hopefully, improves readability, reduces line length and allows to
tailor VIR_TEST_MOCK for specific platform if it has shared library
suffix different from ".so".
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
LD_PRELOAD has no effect on macOS. Instead, dyld(1) provides a way for
symbol hooking via DYLD_INSERT_LIBRARIES. The variable should contain
colon-separated paths to the dylibs to be inserted.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
getnameinfo on macOS formats certain IPv6 addresses as IPv4-translated
addresses. The following pattern has been observed:
::ffff is formated as ::0.0.255.255
::fffe is formated as ::0.0.255.254
::ffff:0 is formated as ::255.255.0.0
::fffe:0 is formated as ::255.254.0.0
::ffff:0:0 is formated as ::ffff:0.0.0.0
::fffe:0:0 is formated as ::fffe:0:0
::ffff:0:0:0 is formated as ::ffff:0:0:0
The getnameinfo behavior causes a failure for:
DO_TEST_PARSE_AND_FORMAT("::ffff", AF_UNSPEC, true);
Use non-ambigious IPv6 for parse/format testing.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
After my previous patches we have virPCIDeviceBindToStub() and
virPCIDeviceUnbindFromStub() which really do nothing but call
virPCIDeviceBindToStubWithOverride() and
virPCIDeviceUnbindFromStubWithOverride() respectively.
Drop "WithOverride" from the names and drop the thin wrappers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This enum was introduced to model how RHEL-7 kernel behaves - for
some reason going with the old way (via new_id + bind) fails but
using driver_override succeeds. Well, we don't need to care about
that anymore since we don't create new_id file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that PCI attach/detach happens solely via driver_override
these two files are no longer needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that nothing supports "pci-stub" driver (aka KVM style of PCI
device assignment) there is no need for virpcimock to create it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
As stated in 84f9358b18 all kernels that we are interested in
have 'drivers_override'. Drop the other, older style of
overriding PCI device driver - newid.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are two places where we need to create virPCIDevice from
given virDomainHostdevDef. In both places the code is duplicated.
Move them into a single function and call it from those two
places.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The KVM assignment was removed in qemu driver in previous commit.
Remove it from domaincapstest too which is hard coding it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
KVM style of PCI devices assignment was dropped in kernel in
favor of vfio pci (see kernel commit v4.12-rc1~68^2~65). Since
vfio is around for quite some time now and is far superior
discourage people in using KVM style.
Ideally, I'd make QEMU_CAPS_VFIO_PCI implicitly assumed but turns
out qemu-3.0.0 doesn't support vfio-pci device for RISC-V.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1711789
Starting up or building some types of pools may take a very long
time (e.g. a misconfigured NFS). Holding the pool object locked
throughout the whole time hurts concurrency, e.g. if there's
another thread that is listing all the pools.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In near future the storage pool object lock will be released
during startPool and buildPool callback (in some backends). But
this means that another thread may acquire the pool object lock
and change its definition rendering the former thread access not
only stale definition but also access freed memory
(virStoragePoolObjAssignDef() will free old def when setting a
new one).
One way out of this would be to have the pool appear as active
because our code deals with obj->def and obj->newdef just fine.
But we can't declare a pool as active if it's not started or
still building up. Therefore, have a boolean flag that is very
similar and forces virStoragePoolObjAssignDef() to store new
definition in obj->newdef even for an inactive pool. In turn, we
have to move the definition to correct place when unsetting the
flag. But that's as easy as calling
virStoragePoolUpdateInactive().
Technically speaking, change made to
storageDriverAutostartCallback() is not needed because until
storage driver is initialized no storage API can run therefore
there can't be anyone wanting to change the pool's definition.
But I'm doing the change there for consistency anyways.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If there's a persistent storage and user tries to start a new one
with the same name and UUID (e.g. to test new configuration) it
may happen that upon failure we lose the persistent defintion.
Fortunately, we don't remove it from the disk only from the
internal list of the pools.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This flag can be used to denote that the definition we're trying
to assign to a pool object is live definition and thus the
inactive definition should be saved into ->newDef.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate storage pool definition assignment into a function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There will be more boolean information that we want to pass to
this function. Instead of having them in separate arguments per
each one, use @flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function is doing much more than plain assigning pool
definition to a pool object. Rename it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is no need for this function to call
virStoragePoolObjEndAPI(). The object is perfectly usable after
return from this function. In fact, all callers will call
virStoragePoolObjEndAPI() eventually.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function comment mistakenly refers to 'poolptr' when in fact
the variable is named 'objptr'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Turns out there's one callback that might remove a storage pool
during its run: storagePoolUpdateAllState() call
storagePoolUpdateStateCallback() which may call
virStoragePoolUpdateInactive() which in turn may call
virStoragePoolObjRemove(). Problem is that the
UpdateStateCallback() sees a storage pool object with just two
references: one for each hash table holding the object. If the
function ends up calling ObjRemove() then upon removing the
object from hash tables those references are gone and thus any
subsequent call touching the object is invalid.
The solution to this problem is to grab reference for the object
we are running iterator with.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fact that we're removing a pool object from the list of pools
doesn't mean we want to unlock it. It violates locking policy
too as object locking and unlocking is not done on the same
level.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It may happen that we leave some XATTRs behind. For instance, on
a sudden power loss, the host just shuts down without calling
restore on domain paths. This creates a problem, because when the
host starts up again, the XATTRs are there but they don't reflect
the true state and this may result in libvirt denying start of a
domain.
To solve this, save a unique timestamp (host boot time) among
with our XATTRs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1741140
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This module contains function to get host boot time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
If user has two domains, each have the same disk (configured for
RW) but each runs with different seclabel then we deny start of
the second domain because in order to do that we would need to
relabel the disk but that would cut the first domain off. Even if
we did not do that, qemu would fail to start because it would be
unable to lock the disk image for the second time. So far, this
behaviour is expected. But what is not expected is that we
increase the refcounter in XATTRs and leave it like that.
What happens is that when the second domain starts,
virSecuritySetRememberedLabel() is called, and since there are
XATTRs from the first domain it increments the refcounter and
returns it (refcounter == 2 at this point). Then callers
(virSecurityDACSetOwnership() and
virSecuritySELinuxSetFileconHelper()) realize that refcounter is
greater than 1 and desired seclabel doesn't match the one the
disk image already has and an error is produced. But the
refcounter is never decremented.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1740024
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Simplify the command line formatter by complicating the validator.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In preparation to moving the validation to the parser,
we need to supply the correct caps.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Apparently /proc/self is automatically converted to /proc/@{pid}
before checking rules, which makes spelling it out explicitly
redundant.
Suggested-by: Jamie Strandboge <jamie@canonical.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The function takes raw UUID and formats it into string
representation. However, the comment mistakenly states that the
expected size of raw UUID buffer is VIR_UUID_RAW_LEN bytes. We
don't have such constant since v0.3.2~24. It should have been
VIR_UUID_BUFLEN.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now that we're using sudo, the initial work directory is no
longer relevant since the user will find themselves in their
home directory when they get control anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order for the prepare script to be really useful, it needs
to be able to perform privileged operations such as installing
additional packages or setting up custom mount points.
In order to achieve that, we now run the container as root,
run the prepare script with full privilege, and only then
switch to the unprivileged account with sudo.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This script is run before $(CI_BUILD_SCRIPT) and can be used
to tweak the environment as necessary before the build starts.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both for ci-build and ci-shell we want to execute basically
the same setup and cleanup logic, the only difference being
that for the former we then run the build script and with the
latter a shell.
Rework the targets so that they both call the generic
ci-run-command rule passing an appropriate $(CI_COMMAND).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of hardcoding build instructions into the Makefile,
move them to a separate script that's mounted into the
container.
This gives us a couple of advantages: we no longer have to
deal with the awkward quoting required when embedding shell
code in a Makefile, and we also provide the users with a way
to override the default build instructions with their own.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we have a home directory for the user, storing the
source there rather than in a custom top-level directory is
the obvious choice.
Later on we're also going to add some more files related to
builds, and storing everything in the user's home directory
will keep things nice and tidy.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some applications expect the user's home directory to be
present on the system and require workarounds when that's not
the case. Creating the home directory along with everything
else is easy enough for us, so let's just do that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We're going to have a few more CI-related files in a second, and
it makes sense to have a separate directory for them rather than
littering the root directory.
$(CI_SCRATCHDIR) can now also be created inside the CI directory,
and as a bonus the make rune necessary to start CI builds without
running configure first becomes shorter.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We only use the list of submodules once, so no need to
store it in a variable.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The $ needs to be escaped when calling shell code from a
Makefile.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A wrapper around xmlXPathRegisterNs that will save us
from having to include xpathInternals.h everywhere
we want to use a custom namespace and open-coding
the strings already contained in virXMLNamespace.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
A function to automatically format the xmlns:<prefix>='<uri>'
attribute for per-driver namespaces.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We have hardcoded the namespace prefix in various places:
1) the xmlns string stored in the 'href' function
2) the xmlXPathRegisterNs call in each parser
3) all the parsing and formatting code actually dealing
with these elements
While eliminating the third one is probably a job for an
actual XML-aware formatter, let's store the prefix separately
here in the virXMLNamespace structure so that future patches
can get rid of the first two bullets.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now that virDomainXMLNamespace matches virXMLNamespace,
we no longer need to keep both around.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There is no need to copy and paste the same types pointing
to void all over the place.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There is no need to copy and paste the same types pointing
to void all over the place.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
For various XMLs, we allow a custom namespace for passing unsupported
configurations.
Introduce a single structure to hold all the driver-specific functions
to remove duplication.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In the future we will perform more actions if ns.parse
is present. Decouple the condition from the actual call.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We do not need to pass the root node, since it's already
included in the XPathContext.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Neither the xmlDocPtr nor the root xmlNode (also passed
in the XPathContext) are interesting to the callees.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
After a successful call to libxl_domain_suspend_only(), set domain
state to VIR_DOMAIN_PMSUSPENDED and send lifecycle event.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A libxl event with shutdown reason LIBXL_SHUTDOWN_REASON_SUSPEND
is sent after a domain is successfully suspended, which could result
from suspending the domain to file (virDomainSave), suspending it to
socket (virDomainMigrate), or suspending it to memory
(virDomainPMSuspendForDuration). Commit d00c77ae changed the event
handler to always set domain state to VIR_DOMAIN_PMSUSPENDED when
LIBXL_SHUTDOWN_REASON_SUSPEND is received. The causes a persistent
domain to show state "pmsuspended" after a successful migrate or save
operation. Revert the commit and ignore the suspend event as before.
This reverts commit d00c77ae45.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Our virStrToLong* helpers converts string to integers where it wraps
strtol standard function. After the conversion happens and there are
some remaining invalid characters our helpers will fail if the second
argument is NULL.
We need to pass pointer to string in cases where there are multiple
values in a single file.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1741825
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
resctrl object stored in def->resctrls is shared by cachetune and
memorytune. The domain xml configuration is parsed firstly for
cachetune then memorytune, and the resctrl object will not be created
in parsing settings for memorytune once it found sharing exists.
But resctrl is improperly freed when sharing happens.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since libvirt-jenkins-ci commit 3c5ac0af41ba, MinGW packages
are installed on Fedora 30 rather than Fedora Rawhide, so we
need to update the Travis CI configuration accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
GitLab CI unfortunately doesn't use the standard Makefile.ci
machinery, so its configuration needs to be updated separately.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Since libvirt-dockerfile commit 7130ffe0a0e9, the containers
used for CI builds have been renamed from buildenv-* to
buildenv-libvirt-* in order to make it possible for projects
other than libvirt to be supported, so we need to update our
Makefile.ci scaffolding accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Mocking of the __open_2 function was added in
commit 459f071cac
Author: Michal Privoznik <mprivozn@redhat.com>
Date: Thu Aug 15 16:37:17 2019 +0200
virpcimock: Mock __open_2()
This function only exists in glibc, however, and the mocking code runs
on systems not using glibc, such as FreeBSD. Even Linux hosts might be
using a different libc impl, though we don't actively try to support
that.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If LXC is disabled at build time then there is no
libvirt_driver_lxc_impl_la-*.lo to run the 'check-protocol'
against.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Fix some typos and grammar (calling something safer and error-prone is
odd, and 'ther eneeds' is an obvious typo), and reflow some long
lines.
Signed-off-by: Eric Blake <eblake@redhat.com>
Gnulib has added a patch that allows configmake.h to be included
without causing build failures on mingw if <winsock2.h> is later
included (whether directly, or indirectly such as through gnulib's
<unistd.h>).
This reverts commit fed58d83c6 ("build:
Fix checkpoint_conf on mingw"), now that we don't have to worry about
header inclusion ordering issues.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since
commit 432faf259b
Author: Michal Privoznik <mprivozn@redhat.com>
Date: Tue Jul 2 19:49:51 2019 +0200
virCommand: use procfs to learn opened FDs
When spawning a child process, between fork() and exec() we close
all file descriptors and keep only those the caller wants us to
pass onto the child. The problem is how we do that. Currently, we
get the limit of opened files and then iterate through each one
of them and either close() it or make it survive exec(). This
approach is suboptimal (although, not that much in default
configurations where the limit is pretty low - 1024). We have
/proc where we can learn what FDs we hold open and thus we can
selectively close only those.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
v5.5.0-173-g432faf259b
programs using the virCommand APIs on Linux need read access to
/proc/self/fd, or they will fail like
error : virCommandWait:2796 : internal error: Child process
(LIBVIRT_LOG_OUTPUTS=3:stderr /usr/lib/libvirt/virt-aa-helper -c
-u libvirt-b20e9a8e-091a-45e0-8823-537119e98bc6) unexpected exit
status 1: libvirt: error : cannot open directory '/proc/self/fd':
Permission denied
virt-aa-helper: error: apparmor_parser exited with error
Update the AppArmor profile for virt-aa-helper so that read access
to the relevant path is granted.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way we're processing the return status, using WIFEXITED() and
friends, only works when we have the raw return status; however,
virCommand defaults to processing the return status for us. Call
virCommandRawStatus() before virCommandRun() so that we get the raw
return status and the logic can actually work.
This results in guest startup failures caused by AppArmor issues
being reported much earlier: for example, if virt-aa-helper exits
with an error we're now reporting
error: internal error: cannot load AppArmor profile 'libvirt-b20e9a8e-091a-45e0-8823-537119e98bc6'
instead of the misleading
error: internal error: Process exited prior to exec: libvirt:
error : unable to set AppArmor profile 'libvirt-b20e9a8e-091a-45e0-8823-537119e98bc6'
for '/usr/bin/qemu-system-x86_64': No such file or directory
Suggested-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Right now we're using the virRun() convenience API, but that
doesn't allow the kind of control we want. Use the virCommand
APIs directly instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The nwfilter XML configs are not merely examples, they are data that is
actively shipped and used in production by users.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU driver now supports Direct Mode for Hyper-V Synthetic timers
for Hyper-V guests.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
QEMU-4.1 supports 'Direct Mode' for Hyper-V synthetic timers
(hv-stimer-direct CPU flag): Windows guests can request that timer
expiration notifications are delivered as normal interrupts (and not
VMBus messages). This is used by Hyper-V on KVM.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Support 'Direct Mode' for Hyper-V Synthetic Timers in domain config.
Make it 'stimer' enlightenment option as it is not a separate thing.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
In particular, use DO_TEST_CAPS_LATEST which tests the canonical
'hv-feature' syntax instead of 'hv_feature' aliases and DO_TEST_CAPS_VER
with 4.0.0 to also test the old syntax.
Suggested-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The pci-stub is so old school that no one uses it. All modern
systems have adapted VFIO. Switch our virpcitest too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The pci-stub is so old school that no one uses it. All modern
systems have adapted VFIO. Switch our virhostdevtest too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The pci-assign device is so old school that no one uses it. All
modern systems have adapted VFIO. Switch our xml2argv test too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The virHostdevPreparePCIDevices() function works in several
steps. In the very first one, it checks if devices we want to
detach from the host are not taken already by some other domain.
However, this piece of code returns different results depending
on the stub driver used (which is not wrong per se, but keep on
reading). If the stub driver is KVM then
virHostdevIsPCINodeDeviceUsed() is called which basically checks
if a PCI device from the detach list is not used by any domain
(including the one we are preparing the device for). If that is
the case, an error is reported ("device in use") and -1 is
returned.
However, that is not what happens if the stub driver is VFIO. If
the stub driver is VFIO, then we iterate over all PCI devices
from the same IOMMU group and check if they are taken by some
other domain (because a PCI device, well IOMMU group, can't be
shared between two or more qemu processes). But we fail to check,
if the device we are trying to detach from the host is not
already taken by a domain. That is, calling
virHostdevPreparePCIDevices() over a hostdev device twice
succeeds the first time and fails too late in the second run
(fortunately, virHostdevResetAllPCIDevices() will throw an error,
but this is already too late because the PCI device in question
was moved to the list of inactive PCI devices and now it appears
in both lists).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It may happen that there are two domains with the same name in
two separate drivers (e.g. qemu and lxc). That is why for PCI
devices we track both names of driver and domain combination
which has taken the device. However, when we check if given PCI
device is in use (or PCI devices from the same IOMMU group) we
compare only domain name. This means that we can mistakenly claim
device as free to use while in fact it isn't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
So far, we don't need to create anything under
/sys/kernel/iommu_groups/N/devices directory (which is symlinked
from /sys/bus/pci/devices/DDDD:BB:DD.F/iommu_group directory)
because virhostdevtest still tests the old KVM assignment and
thus has no notion of IOMMU groups. This will change in near
future though. And in order to discover devices belonging to the
same IOMMU group we need to do what kernel does - create symlinks
to devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
So far, we are creating devices directly under
/sys/bus/pci/devices/*. There is not much problem with it, but if
we really want to model kernel behaviour we need to create them
under /sys/devices/pciDDDD:BB and then only symlink them from the
old location.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In upcoming patches we will need only some portions of the PCI
address. To construct that easily, it's better if the PCI address
of a device is stored as four integers rather than one string.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Have just one function to generate path to a PCI driver so that
when we change it in near future there's only few of the places
we need to fix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Have just one function to generate path to a PCI device so that
when we change it in near future there's only few of the places
we need to fix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In near future, we will be creating devices under different
location and just symlink them under devices/. Just like real
kernel does. But for that we need the directories to exist.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We will need to create more directories and instead of
introducing bunch of new variables to hold their actual
paths, we can have one and reuse it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The @fakesysfspcidir is derived from @fakerootdir. We don't need
two global variables that contain nearly the same content,
especially when we construct the actual path anyways.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When creating a PCI device, the pciDevice structure contains @id
member which holds device address (DDDD.BB:DD.F) and is type of
'char *'. But the structure is initialized from a const char and
in fact we never modify or free the @id.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Newer kernels (v3.16-rc1~29^2~6^4) have 'driver_override' file
which simplifies way of binding a PCI device to desired driver.
Libvirt has support for this for some time too (v2.3.0-rc1~236),
but not our virpcimock. So far we did not care because our code
is designed to deal with this situation. Except for one.
hypothetical case: binding a device to the vfio-pci driver can be
successful only via driver_override. Any attempt to bind a PCI
device to vfio-pci driver using old method (new_id + unbind +
bind) will fail because of b803b29c1a. While on vanilla kernel
I'm able to use the old method successfully, it's failing on RHEL
kernels (not sure why).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This reverts commit b70c093ffa.
In next commit the virpcimock is going to be extended and thus
binding a PCI device to vfio-pci driver will finally succeed.
Remove this test as it will no longer make sense.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The pci_driver_bind() and pci_driver_unbind() functions are
"internal implementation", meaning other parts of the code should
be able to call them and get the job done. Checking for actions
(PCI_ACTION_BIND and PCI_ACTION_UNBIND) should be done in
handlers (pci_driver_handle_bind() and
pci_driver_handle_unbind()). Surprisingly, the other two actions
(PCI_ACTION_NEW_ID and PCI_ACTION_REMOVE_ID) are checked already
at this level.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virErrorPreserveLast()/virErrorRestore() (added in commit 8333e7455
back in 2017), do a better better job of saving and restoring the last
libvirt error than virSaveLastError()/virErrorRestore() (they're
simpler, and they also save/restore the system errno).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
During networkPortCreateXML, if networkAllocatePort() failed,
networkReleasePort() would be called, which would (in the case of
network pools of macvtap passthrough devices) attempt to find the
allocated device by comparing port->plug.direct.linkdev to each device
in the pool. Since port->plug.direct.linkdev was still NULL, the
attempted strcmp would result in a SEGV.
Calling networkReleasePort() during error cleanup is something that
should only be done if networkAllocatePort() has already succeeded. It
turns out there is one other possible error exit from
networkPortCreateXML() that happens after networkAllocatePort() has
succeeded, so the code to call networkReleasePort() was just moved
down to there.
Resolves: https://bugzilla.redhat.com/1741390
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit e69444e17 (first appeared in libvirt-5.5.0) added the new value
"VIR_ACCESS_PERM_NETWORK_SEARCH_PORTS" to the virAccessPerNetwork
enum, and also the string "search_ports" to the VIR_ENUM_IMPL() macro
for that enum. Unfortunately, the enum value was added in the middle
of the list, while the string was added to the end of the
VIR_ENUM_IMPL().
This patch corrects that error by moving the new value to the end of
the enum definition, so that the order matches that of the string
list.
Resolves: https://bugzilla.redhat.com/1741428
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we support blockdev for qemuDomainBlockCopy we can allow
copying to remote destinations as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement job handling for the block copy job (drive/blockdev-mirror)
when using -blockdev. In contrast to the previously implemented
blockjobs the block copy job introduces new images to the running qemu
instance, thus requires a bit more handling.
When copying to new images the code now makes use of blockdev-create to
format the images explicitly rather than depending on automagic qemu
behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU finally exposes an interface which allows us to instruct it to
format or create arbitrary images. This is required for blockdev
integration of block copy and snapshots as we need to pre-format images
prior to use with blockdev-add.
This path introduces job handling and also helpers for formatting and
attaching a whole image described by a virStorageSource.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than copying just the top level image, let's copy the full user
provided backing chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only code path which calls the parser with the
VIR_DOMAIN_DEF_PARSE_DISK_SOURCE is from qemuDomainBlockCopy. Since that
code path can properly handle backing chains for the disk and it's
desired to pass the parsed chains to the block copy code remove the
condition which prevents parsing the <backingStore> element.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 3f93884a4d where the job handling of commit jobs with
blockdev was added I've forgot to add a 'break' in the switch fomatting
the status XML. Thankfully this would not be a problem as the cases
where this fell through didn't have any code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The utility of the function is extremely limited as for block copy
we need to register the mirror chain earlier than when it's set with the
disk. This means that it would be open-coded in that case.
Avoid any weird usage and just open-code the only current usage, remove
the function, and reword the docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 16ca234b56 refactored how the 'shallow' and 'reuse' flags
are accessed but neglected to fix the clearing of 'shallow' in case when
the disk has no backing chain. This means that we'd request a shallow
copy even without backing chain and also a few checks would work wrong.
Fix it by using the extracted variable everywhere.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow reusing original backing chain when doing a shallow copy without
reuse of external image. The existing logic didn't allow it but it will
be possible. Also add a note to explain that logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename qemuDomainObjPrivateXMLFormatBlockjobFormatChain to
qemuDomainObjPrivateXMLFormatBlockjobFormatSource and add a 'chain'
parameter which allows controlling whether the backing chain is
formatted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function ignores all errors from qemuStorageLimitsRefresh by calling
virResetLastError. This still logs them. Since qemuStorageLimitsRefresh
allows suppressing some, do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuStorageLimitsRefresh uses qemuDomainStorageOpenStat internally and
there are callers which don't care about the error. Propagate the
skipInaccessible flag so that we can log less errors.
Callers currently don't care about the return value change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
None of the callers of qemuDomainStorageUpdatePhysical care about
errors.
Use the new flag for qemuDomainStorageOpenStat which suppresses some
errors and move the reset of the rest of the uncommon errors into this
function. Document what is happening in a comment for the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virStorageSourceUpdatePhysicalSize is called only from
qemuDomainStorageUpdatePhysical and all callers of it reset the libvirt
error if -1 is returned.
Don't bother setting the error in the first place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some callers of this function actually don't care about errors and reset
it. The message is still logged which might irritate users in this case.
Add a boolean flag which will do few checks whether it actually makes
sense to even try opening the storage file. For local files we check
whether it exists and for remote files we at first see whether we even
have a storage driver backend for it in the first place before trying to
open it.
Other problems will still report errors but these are the most common
scenarios which can happen here.
This patch changes the return value of the function so that the caller
is able to differentiate the possibilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function will be reused in the qemu snapshot code. The argument is
turned into const similarly to the other virStorageFileSupports*
functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the nbd export name contains a colon, our parser would not parse it
properly as we split the string by colons. Modify the code to look up
the exportname and copy any trailing characters as the export name is
supposed to be at the end of the string.
https://bugzilla.redhat.com/show_bug.cgi?id=1733044
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use 'id' instead of 'name' for anchors which adds the hidden clickable
headerlink helper so it's way simpler to link to a specific part of the
docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The parent bridge configuration of the current device
should be read and reset, instead of reading the current
device configuration.
Signed-off-by: He Xin <hexin15@baidu.com>
Signed-off-by: Liu Qi <liuqi16@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In some cases e.g. with clang on fedora 30 __open2 isn't even declared
which results in the following build error:
/home/pipo/libvirt/tests/virpcimock.c:939:1: error: no previous prototype for function
'__open_2' [-Werror,-Wmissing-prototypes]
__open_2(const char *path, int flags)
Add a separate declaration to appease the compiler.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since users can enable/disable drivers at compile time, it may
happen that @drivers array is in fact empty (in both its
occurrences within the function). This means that
ARRAY_CARDINALITY() returns 0UL which makes gcc unhappy because
of loop condition:
i < ARRAY_CARDINALITY(drivers)
GCC complains that @i is unsigned and comparing an unsigned value
against 0 is always false. However, changing the type of @i to
ssize_t is not enough, because compiler still sees the unsigned
zero. The solution is to typecast the ARRAY_CARDINALITY().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Hold on to your hat, this is going to be a wild ride. As nearly
nothing in glibc, nor open() is a real function. Just look into
bits/fcntl2.h and you'll see that open() is actually a thin
wrapper that calls either __open_alias() or __open_2(). Now,
before 801ebb5edb the open() done in
virPCIDeviceConfigOpenInternal() had a constant oflags (we were
opening the pci config with O_RDWR). And since we were not
passing any mode nor O_CREAT the wrapper decided to call
__open_alias() which was open() provided by our mock. So far so
good. But after the referenced commit, the oflags is no longer
compile time constant and therefore the wrapper calls __open_2()
which we don't mock and thus the real __open_2() from glibc was
called and thus we did try to open real path from host's /sys.
This of course fails with variety of errors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The gdb requires ptrace capability, but the way we run containers
now is that they drop every capability. Preserve SYS_PTRACE then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add virStorageFileSupportsCreate which allows silent check whether
virStorageFileCreate is implemented.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify the return value so that callers don't have to repeat logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This helper extracts common lifecycle action code from both
testDomainShutdownFlags and testDomainReboot.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
All the callers left require virPCIDeviceConfigOpen to be fatal
and only use read-only access to the config file.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For callers that only need read-only access and don't want
an error reported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Only a handful of function need write access to the PCI config
space. Create a wrapper function for those so that we can
open it read only by default.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As a side effect, this also silences the possible:
internal error: Unable to get DBus system bus connection:
Failed to connect to socket /run/dbus/system_bus_socket:
No such file or directory
error, since we check upfront whether dbus is available.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Look up the binary name upfront to avoid the error:
Cannot find 'pm-is-supported' in path: No such file or directory
In that case, we just assume nodesuspend is not available.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Get rid of the ret variable as well as the cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When QEMU supports flushing caches at the end of migration, we can
safely allow migration even if disk/driver/@cache is not none nor
directsync.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Acked-By: Peter Krempa <pkrempa@redhat.com>
QEMU 4.0.0 and newer automatically drops caches at the end of migration.
Let's check for this capability so that we can allow migration when disk
cache is turned on.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Acked-By: Peter Krempa <pkrempa@redhat.com>
The original message was logically incorrect: cache != none or cache !=
directsync is always true. But even replacing "or" with "and" doesn't
make it more readable for humans.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Acked-By: Peter Krempa <pkrempa@redhat.com>
In the first stage of incoming migration (qemuMigrationDstPrepareAny) we
call qemuMigrationEatCookie when there's no vm object created yet and
thus we don't have any private data to pass.
Broken by me in commit v5.6.0-109-gbf15b145ec.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This reverts commit 47cbc92987.
The section is no longer correct when the patch switching to gnulib's
make coverage was reverted.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Acked-By: Eric Blake <eblake@redhat.com>
This reverts commit f38d553e2d.
Gnulib's make coverage (or init-coverage, build-coverage, gen-coverage)
is not a 1-1 replacement for the original configure option. Our old
--enable-test-coverage seems to be close to gnulib's make build-coverage
except gnulib runs lcov in that phase and the build actually fails for
me even before lcov is run. And since we want to be able to just build
libvirt without running lcov, I suggest reverting to our own
implementation.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-By: Eric Blake <eblake@redhat.com>
If /etc/qemu/firmware directory exists, but is not readable then
qemuxml2xmltest fails. This is because once domain XML is parsed
it is validated. For that domain capabilities are needed.
However, when constructing domain capabilities, FW descriptors
are loaded and this is the point where the test fails, because it
fails to open one of the directories.
Fixes: 5b9819eedc domain capabilities: Expose firmware auto selection feature
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Back in July 2010, commit 6ea90b84 (meant to resolve
https://bugzilla.redhat.com/571991 ) added code to set the MAC address
of any tap device to the associated guest interface's MAC, but with
the first byte replaced with 0xFE. This was done in order to assure
that
1) the tap MAC and guest interface MAC were different (otherwise L2
forwarding through the tap would not work, and the kernel would
repeatedly issue a warning stating as much).
2) any bridge device that had one of these taps attached would *not*
take on the MAC of the tap (leading to network instability as
guests started and stopped)
A couple years later, https://bugzilla.redhat.com/798467 was filed,
complaining that a user could configure a tap-based guest interface to
have a MAC address that itself had a first byte of 0xFE, silently
(other than the kernel warning messages) resulting in a non-working
configuration. This was fixed by commit 5d571045, which logged an
error and failed the guest start / interface attach if the MAC's first
byte was 0xFE.
Although this restriction only reduces the potential pool of MAC
addresses from 2^46 (last two bits of byte 1 must be set to 10) by
2^32 (still 4 orders of magnitude larger than the entire IPv4 address
space), it also means that management software that autogenerates MAC
addresses must have special code to avoid an 0xFE prefix. Now after 7
years, someone has noticed this restriction and requested that we
remove it.
So instead of failing when 0xFE is found as the first byte, this patch
removes the restriction by just replacing the first byte in the tap
device MAC with 0xFA if the first byte in the guest interface is
0xFE. 0xFA is the next-highest value that still has 10 as the lowest
two bits, and still
2) meets the requirement of "tap MAC must be different from guest
interface MAC", and
3) is high enough that there should never be an issue of the attached
bridge device taking on the MAC of the tap.
The result is that *any* MAC can be chosen by management software
(although it would still not work correctly if a multicast MAC (lowest
bit of first byte set to 1) was chosen), but that's a different
issue).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com
We have some early replies that don't quite match with how
QEMU 2.12.0 as released behaves.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU version 2.12.1 introduced a performance feature under commit
be7773268d98 ("target-i386: add KVM_HINTS_DEDICATED performance hint")
This patch adds a new KVM feature 'hint-dedicated' to set this performance
hint for KVM guests. The feature is off by default.
To enable this hint and have libvirt add "-cpu host,kvm-hint-dedicated=on"
to the QEMU command line, the following XML code needs to be added to the
guest's domain description in conjunction with CPU mode='host-passthrough'.
<features>
<kvm>
<hint-dedicated state='on'/>
</kvm>
</features>
...
<cpu mode='host-passthrough ... />
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We don't include this information for any other library, and
having it there means there are two places we need to change
every time the required version is bumped.
configure will provide the user with a nice error message,
which includes the required version, if libxml2 found on the
system is too old.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The various distros have the following libxml2 vesions:
CentOS 7: 2.9.1
Debian Stretch: 2.9.4
FreeBSD Ports: 2.9.9
Ubuntu 16.04 LTS: 2.9.3
Based on this sampling, we can reasonably bump libxml2 min
version to 2.9.1
The 'query_raw' struct field was added in version 2.6.28,
so can be assumed to exist.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU shows a warning message if partial NUMA mapping is set. This patch
adds a warning message in libvirt when editing the XML. It must be an
error in future, when QEMU remove this ability.
Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically URIs handled by the remote driver will always connect to
the libvirtd UNIX socket. There will now be one daemon per driver, and
each of these has its own UNIX sockets to connect to.
It will still be possible to run the traditional monolithic libvirtd
though, which will have the original UNIX socket path.
In addition there is a virproxyd daemon that doesn't run any drivers,
but provides proxying for clients accessing libvirt over IP sockets, or
tunnelling to the legacy libvirtd UNIX socket path.
Finally when running inside a daemon, the remote driver must not reject
connections unconditionally. For example, the QEMU driver needs to be
able to connect to the network driver. The remote driver must thus be
willing to handle connections even when inside the daemon, provided no
local driver is registered.
This refactoring enables the remote driver to be able to connect to the
per-driver daemons. The URI parameter "mode" accepts the values "auto",
"direct" and "legacy" to control which daemons are connected to.
The client side libvirt.conf config file also supports a "remote_mode"
setting which is used if the URI parameter is not set.
If neither the config file or URI parameter set a mode, then "auto"
is used, whereby the client looks to see which sockets actually exist
right now.
The remote driver will only ever spawn the per-driver daemons, or
the legacy libvirtd. It won't ever try to spawn virtproxyd, as
that is only there for IP based connectivity, or for access from
legacy remote clients.
If connecting to a remote host over any kind of ssh tunnel, for now we
must assume only the legacy socket exists. A future patch will introduce
a netcat replacement that is tailored for libvirt to make remote
tunnelling easier.
The configure arg '--with-remote-default-mode=legacy|direct' allows
packagers to set a default at build time. If not given, it will default
to legacy mode.
Eventually the default will switch to direct mode. Distros can choose
to do the switch earlier if desired. The main blocker is testing and
suitable SELinux/AppArmor policies.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ssh, libssh, libssh2 & unix transports all need to use a UNIX socket
path, and duplicate some of the same logic for error checking. Pull this
out into a separate method to increase code sharing.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of open-coding a string -> enum conversion, use the enum helpers
for the remote driver transport. The old code uses STRCASEEQ, so we must
force the URI transport to lowercase for sake of back-compatibility.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virtproxyd daemon is merely responsible for forwarding RPC calls to
one of the other per-driver daemons. As such, it does not have any
drivers loaded and so regular auto-probing logic will not work. We need
it to be able to handle NULL URIs though, so must implement some kind of
alternative probing logic.
When running as root this is quite crude. If a per-driver daemon is
running, its UNIX socket will exist and we can assume it will accept
connections. If the per-driver daemon is not running, but socket
autostart is enabled, we again just assume it will accept connections.
The is not great, however, because a default install may well have
all sockets available for activation. IOW, the virtxend socket may
exist, despite the fact that the libxl driver will not actually work.
When running as non-root this is slightly easier as we only have two
drivers, QEMU and VirtualBox. These daemons will likely not be running
and socket activation won't be used either, as libvirt spawns the
daemon on demand. So we just check whether the daemon actually is
installed.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When the client has a connection to one of the hypervisor specific
daemons (eg virtqemud), the app may still expect to use the secondary
driver APIs (storage, network, etc). None of these will be registered in
the hypervisor daemon, so we must explicitly open a connection to each
of the daemons for the secondary drivers we need.
We don't want to open these secondary driver connections at the same
time as the primary connection is opened though. That would mean that
establishing a connection to virtqemud would immediately trigger
activation of virtnetworkd, virnwfilterd, etc despite that that these
drivers may never be used by the app.
Thus we only open the secondary driver connections at time of first use
by an API call.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The driver dispatch methods access the priv->conn variables directly.
In future we want to dynamically open the connections for the secondary
driver. Thus we want the methods to call a method to get the connection
handle instead of assuming the private variable is non-NULL.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If the event (un)registration methods are invoked while no connection is
open, they jump to a cleanup block which unlocks a mutex which is not
currently locked.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The driver dispatch methods access the priv->conn variables directly.
In future we want to dynamically open the connections for the secondary
driver. Thus we want the methods to call a method to get the connection
handle instead of assuming the private variable is non-NULL.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The client parameter is always used to get access to the private data
struct.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The admin client now supports addressing the per-driver daemons using
the obvious URI schemes for each daemon. eg virtqemud:///system
virtqemud:///session, etc.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virtvzd daemon will be responsible for providing the vz API
driver functionality. The vz driver is still loaded by the main
libvirtd daemon at this stage, so virtvzd must not be running at
the same time.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virtbhyved daemon will be responsible for providing the bhyve API
driver functionality. The bhyve driver is still loaded by the main
libvirtd daemon at this stage, so virtbhyved must not be running at
the same time.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virtvboxd daemon will be responsible for providing the vbox API
driver functionality. The vbox driver is still loaded by the main
libvirtd daemon at this stage, so virtvboxd must not be running at
the same time.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virtlxcd daemon will be responsible for providing the lxc API
driver functionality. The lxc driver is still loaded by the main
libvirtd daemon at this stage, so virtlxcd must not be running at
the same time.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virtqemud daemon will be responsible for providing the qemu API
driver functionality. The qemu driver is still loaded by the main
libvirtd daemon at this stage, so virtqemud must not be running at
the same time.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virtxend daemon will be responsible for providing the libxl API
driver functionality. The libxl driver is still loaded by the main
libvirtd daemon at this stage, so virtxend must not be running at
the same time.
This naming is slightly different than other drivers. With the libxl
driver, the user still has a 'xen:///system' URI, and we provide it
in a libvirt-daemon-xen RPM, which pulls in a
libvirt-daemon-driver-libxl RPM.
Arguably we could rename the libxl driver to "xen" since it is the
only xen driver we have these days, and that matches how we expose it
to users in the URI naming.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virtnwfilterd daemon will be responsible for providing the nwfilter API
driver functionality. The nwfilter driver is still loaded by the main
libvirtd daemon at this stage, so virtnwfilterd must not be running at
the same time.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virtnodedevd daemon will be responsible for providing the nodedev API
driver functionality. The nodedev driver is still loaded by the main
libvirtd daemon at this stage, so virtnodedevd must not be running at
the same time.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virtstoraged daemon will be responsible for providing the storage API
driver functionality. The storage driver is still loaded by the main
libvirtd daemon at this stage, so virtstoraged must not be running at
the same time.
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virtinterfaced daemon will be responsible for providing the interface API
driver functionality. The interface driver is still loaded by the main
libvirtd daemon at this stage, so virtinterfaced must not be running at
the same time.
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virtnetworkd daemon will be responsible for providing the network API
driver functionality. The network driver is still loaded by the main
libvirtd daemon at this stage, so virtnetworkd must not be running at
the same time.
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virtsecretd daemon will be responsible for providing the secret API
driver functionality. The secret driver is still loaded by the main
libvirtd daemon at this stage, so virtsecretd must not be running at
the same time.
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The libvirtd daemon provides the traditional libvirt experience where
all the drivers are in a single daemon, and is accessible over both
local UNIX sockets and remote IP sockets.
In the new world we're having a set of per-driver daemons which will
primarily be accessed locally via their own UNIX sockets.
We still, however, need to allow for case of applications which will
connect to libvirt remotely. These remote connections can be done as
TCP/TLS sockets, or by SSH tunnelling to the UNIX socket.
In the later case, the old libvirt.so clients will only know about
the path to the old libvirtd socket /var/run/libvirt/libvirt-sock,
and not the new driver sockets /var/run/libvirt/virtqemud-sock.
It is also not desirable to expose the main driver specific daemons
over IP directly to minimize their attack service.
Thus the virtproxyd daemon steps into place, to provide TCP/TLS sockets,
and back compat for the old libvirtd UNIX socket path(s). It will then
forward all RPC calls made to the appropriate driver specific daemon.
Essentially it is equivalent to the old libvirtd with absolutely no
drivers registered except for the remote driver (and other stateless
drivers in libvirt.so).
We could have modified libvirtd so none of the drivers are registed
to get the same end result. We could even add a libvirtd.conf parameter
to control whether the drivers are loaded to enable users to switch back
to the old world if we discover bugs in the split-daemon model. Using a
new daemon though has some advantages
- We can make virtproxyd and the virtXXXd per-driver daemons all
have "Conflicts: libvirtd.service" in their systemd unit files.
This will guarantee that libvirtd is never started at the same
time, as this would result in two daemons running the same driver.
Fortunately drivers use locking to protect themselves, but it is
better to avoid starting a daemon we know will conflict.
- It allows us to break CLI compat to remove the --listen parameter.
Both listen_tcp and listen_tls parameters in /etc/libvirtd/virtd.conf
will default to zero. Either TLS or TCP can be enabled exclusively
though virtd.conf without requiring the extra step of adding --listen.
- It allows us to set a strict SELinux policy over virtproxyd. For
back compat the libvirtd policy must continue to allow all drivers
to run. We can't easily give a second policy to libvirtd which
locks it down. By introducing a new virtproxyd we can set a strict
policy for that daemon only.
- It gets rid of the weird naming of having a daemon with "lib" in
its name. Now all normal daemons libvirt ships will have "virt"
as their prefix not "libvirt".
- Distros can more easily choose their upgrade path. They can
ship both sets of daemons in their packages, and choose to
either enable libvirtd, or enable the per-driver daemons and
virtproxyd out of the box. Users can easily override this if
desired by just tweaking which systemd units are active.
After some time we can deprecate use of libvirtd and after some more
time delete it entirely, leaving us in a pretty world filled with
prancing unicorns.
The main downside with introducing a new daemon, and with the
per-driver daemons in general, is figuring out the correct upgrade
path.
The conservative option is to leave libvirtd running if it was
an existing installation. Only use the new daemons & virtproxyd
on completely new installs.
The aggressive option is to disable libvirtd if already running
and activate all the new daemons.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When running in libvirtd, we are happy for any of the drivers to simply
skip their initialization in virStateInitialize, as other drivers are
still potentially useful.
When running in per-driver daemons though, we want the daemon to abort
startup if the driver cannot initialize itself, as the daemon will be
useless without it.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The make logic assumes that the SYSTEMD_UNIT_FILES var can be built from
SYSTEMD_UNIT_FILES_IN by simply dropping the directory prefix and the
.in suffix.
This won't work in future when a single .in unit file can be used to
generate multiple different units.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Prepare for reusing libvirtd socket unit files with other daemons by
making various parts of their config conditionally defined by the make
rules.
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The make rules for the systemd socket unit files are all essentially
identical and can be collapsed into a single generic rule. The service
unit file rule can be simplified too.
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The same make variables will be useful for building both libvirtd and
the split daemons, so refactor & rename variables to facilitate reuse.
Automake gets annoyed if you define a variable ending LDFLAGS:
src/remote/Makefile.inc.am:53: warning: variable 'REMOTE_DAEMON_LDFLAGS' is defined but no program or
src/remote/Makefile.inc.am:53: library has 'REMOTE_DAEMON' as canonical name (possible typo)
So we trick it by using an LD_FLAGS or LD_ADD suffix instead.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
GNULIB sets $(LIBSOCKET) on mingw to pull in the windows socket
APIs. This is trivially not required, since we don't build libvirtd
on mingw.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Prepare for reusing libvirtd augeas defintions with other daemons by
making the config parameters for IP sockets conditionally defined by
the make rules.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Prepare for reusing libvirtd config to create other daemons by making
the config parameters for IP sockets conditionally defined by the make
rules.
The main libvirtd daemon will retain IP listen ability, but all the
driver specific daemons will be local UNIX sockets only. Apps needing
IP connectivity will connect via the libvirtd daemon which will proxy
to the driver specfic daemon.
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Using @VARNAME@ is a normal style of automake, so lets match that.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Prepare for reusing libvirtd source to create other daemons by making
the use of IP sockets conditionally defined by the make rules.
The main libvirtd daemon will retain IP listen ability, but all the
driver specific daemons will be local UNIX sockets only. Apps needing
IP connectivity will connect via the libvirtd daemon which will proxy
to the driver specfic daemon.
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Prepare for reusing libvirtd source to create other daemons by making
the driver(s) to load conditionally defined by the make rules.
If nothing is set, all drivers will be loaded, ignoring any missing ones
as historically done.
If MODULE_NAME is set only one driver will be loaded and that one must
succeed.
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Prepare for reusing libvirtd source to create other daemons by making
the daemon name conditionally defined by the make rules.
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The remote daemon tries to print out its help text in a couple of giant
blocks of text. This has already lead to duplication of the text for the
privileged vs unprivileged execution mode. With the introduction of more
daemons, this text is going to be duplicated many more times with small
variations. This is very unfriendly to translators as they have to
translate approximately the same text many times with small tweaks.
Splitting the text up into individual strings to print means that each
piece will only need translating once. It also gets rid of all the
layout information from the translated strings, so avoids the problem of
translators breaking formatting by mistake.
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of adding generated config files to CLEANFILES and BUILT_SOURCES
in each makefile, add them all at once.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of each subdir containing its own custom rule for checking the
augeas tests, use common rule for all.
The new rule searches both src + build dirs for include files, since
some augeas files will be auto-generated very shortly.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current make rules are inconsistent about which directory the
augeas test files are created in. Put them all in the same dir as
their source.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We already have a variable that lists all augeas test files, so we can
add everything to CLEANFILES at once.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The augeas-gentest.pl program merges a config file into a augeas
file, saving the output to a new file. It is going to be useful
to further process the output file, and it would be easier if this can
be done with a pipeline, so change augeas-gentest.pl to write to stdout
instead of a file.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Each public API is required to log all arguments it was called
with. Except, there are some missing. Fix them.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDeviceDefPostParse callback requires qemuCaps, we need
to make sure it gets the capabilities stored in the domain's private
data if the domain is running. Passing NULL may cause QEMU capabilities
probing to be triggered in case QEMU binary changed in the meantime.
When this happens while a running domain object is locked, QMP event
delivered to the domain before QEMU capabilities probing finishes will
deadlock the event loop.
QEMU capabilities lookup (via domainPostParseDataAlloc callback) is
hidden inside virDomainDeviceDefPostParseOne with no way to pass
qemuCaps to virDomainDeviceDef* functions. This patch fixes all
remaining paths leading to virDomainDeviceDefPostParse.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
Several general snapshot and checkpoint APIs were lazily passing NULL as
the parseOpaque pointer instead of letting their callers pass the right
data. This patch fixes all paths leading to virDomainDefParseNode.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
This patch fixes all paths leading to virDomainDefPostParse.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
Several general functions from domain_conf.c were lazily passing NULL as
the parseOpaque pointer instead of letting their callers pass the right
data. This patch fixes all paths leading to virDomainDefCopy to do the
right thing.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
This patch fixes all paths leading to qemuMigrationCookieXMLParse.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
This patch fixes all paths leading to virDomainDefParseString.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
This patch fixes all paths leading to qemuMigrationAnyPrepareDef.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
This patch fixes all paths leading to qemuDomainSaveImageOpen.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
This patch fixes all paths leading to qemuDomainDefFormatBufInternal.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
This patch fixes all paths leading to qemuDomainDefCopy.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If yajl_parse() fails, we try to print an error message. For
that, yajl_get_error() is used. However, its documentation say
that caller is also responsible for freeing the memory it
allocates by using yajl_free_error().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The NSS module has a compile time option which when enabled makes
ERROR() and DEBUG() print messages onto stderr. But now that the
module no longer links with libvirt, we need to include stdio.h
and define NULLSTR().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Due to latest rewrite of NSS module, we are doing yajl parsing
ourselves. This means, we had to introduce couple of callback
that yajl calls. According to its documentation, a callback can
cancel parsing if it returns a zero value. Well, we do just that
in the string callback (findLeasesParserString()). If the JSON
file we are parsing contains a key that we are not interested in,
zero is returned meaning stop all parsing. This is not correct,
because the JSON file can contain some other keys which are not
harmful for our address translation (e.g. 'client-id').
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
host-passthrough documentation menions that the source and destination
hosts are not identical in both hardware and configuration. Configuration
actually includes microcode version and QEMU version, but this is not
clear so make it explicit
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190802125415.15227-1-pbonzini@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This completer can be used to complete pool types.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Now that there is no code in virsh-completer.c it doesn't make
much sense to keep those #include-s around. Delete them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
host (e.g. they complete various checkpoint aspects)
into virsh-completer-checkpoint.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
host (e.g. they complete various host aspects)
into virsh-completer-host.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
snapshot (e.g. they complete various snapshot aspects)
into virsh-completer-snapshot.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
secret (e.g. they complete various secret aspects)
into virsh-completer-secret.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
nwfilter (e.g. they complete various nwfilter aspects)
into virsh-completer-nwfilter.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
nodedev (e.g. they complete various nodedev aspects)
into virsh-completer-nodedev.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
networks (e.g. they complete various network aspects)
into virsh-completer-network.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
interfaces (e.g. they complete various interface aspects)
into virsh-completer-interface.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
storage volumes (e.g. they complete various storage volume
aspects) into virsh-completer-volume.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
storage pools (e.g. they complete various storage pool aspects)
into virsh-completer-pool.c.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
domains (e.g. they complete various domain aspects) into
virsh-completer-domain.c.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
In next commits the virsh-completer.c is going to be split into
smaller files. Expose virshCommaStringListComplete() so that it
can still be used from those new files.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The proper name is [vir|virsh]NodeDevice* and not Nodedev.
Fortunately, there are only handful of offenders.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Confusing message is printed when a parse/format sockettest fails. E.g.
there's a test that parses/formats ::ffff and the format fails like that:
38) Test format ::ffff family AF_UNSPEC ...
Offset 2
Expect [0.0.255.255]
Actual [ffff]
It should be instead:
38) Test format ::ffff family AF_UNSPEC ...
Offset 2
Expect [ffff]
Actual [0.0.255.255]
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The conversion to drop gnulib in the previous patch:
commit 8242ce4f45
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Aug 8 10:23:26 2019 +0100
tools: avoid accidentally using files from gnulib
Missed a few conversions needed for FreeBSD. In particular
netdb.h doesn't pull in sys/socket.h or netinet/in.h
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the correct enum constant when validating vlan usage.
This fixes a merge error in
commit 6cb0ec48bd
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Mon Sep 3 17:34:22 2018 +0100
network: convert networkAllocateActualDevice to virNetworkPortDef
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The AM_CPPFLAGS setting includes the gnulib headers, which
means we can get some replacement functions defined. Since
virt-login-shell and the NSS module intentionally don't link
to gnulib, these replacement functions causes link failures.
This was seen cross-compiling on Debian for example:
virt-login-shell.o: In function `main':
/builds/libvirt/libvirt/build/tools/../../tools/virt-login-shell.c:81: undefined reference to `rpl_strerror'
/builds/libvirt/libvirt/build/tools/../../tools/virt-login-shell.c:66: undefined reference to `rpl_strerror'
/builds/libvirt/libvirt/build/tools/../../tools/virt-login-shell.c:75: undefined reference to `rpl_strerror'
The only way to avoid these replacement gnulib headers is
to drop the -Ignulib/lib flags. We do still want to use
gnulib for configmake.h and intprops.h, but those can be
included via their full path.
We must also stop using internal.h, since that expects
-Ignulib/lib to be on the include path in order to resolve
the verify.h header.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Requires adjustments to use verify_expr() which replaces
verify_true(), and to disable the new syntax check
'sc_prohibit_gnu_make_extensions' since we require GNU make.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit fed58d83 was a hack to fix a mingw build failure due to header
inclusion order resulting in a clash over the use of DATADIR,
repeating a trick made several other times in the past. Better is to
revert that, and instead use pragmas to avoid the clash in the first
place, regardless of header ordering, solving it for everyone.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that the code does not refer to any libvirt headers,
except internal.h macros, it does not need to link to
any libvirt code, nor gnulib either. The only thing it
needs is yajl.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the plain libc APIs to avoid a dependancy on the main libvirt
code from the nss module.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the plain libc socket APIs to avoid a dependancy on the main
libvirt code from the nss module.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The .leases file is currently loaded using the virLease class,
which in turn uses the virJSON parsing code. This pulls in a
heap of libvirt code (logging, hash tables, etc) which we do
not wish to depend on.
This uses the yajl parser code directly, so the only dep is
yajl and plain libc functions.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The .macs file is currently loaded using the virMacMap class,
which in turn uses the virJSON parsing code. This pulls in a
heap of libvirt code (logging, hash tables, objects, etc) which
we do not wish to depend on.
This uses the yajl parser code directly, so the only dep is
yajl and plain libc functions.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Build a list of mac addresses immediately, so that later code
searching for leases can be simplified and avoid needing to
use the virMacMap object.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the plain libc APIs to avoid a dependancy on the main libvirt
code from the nss module.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the plain libc APIs to avoid a dependancy on the main libvirt
code from the nss module.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the plain libc APIs to avoid a dependancy on the main libvirt
code from the nss module.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that 100% of libvirt code is forbidden in a SUID environment,
we no longer need to worry about whether env variables are
trustworthy or not. The virt-login-shell setuid program, which
does not link to any libvirt code, will purge all environment
variables, except $TERM, before invoking the virt-login-shell-helper
program which uses libvirt.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that 100% of libvirt code is forbidden in a SUID environment,
we no longer need to worry about whether env variables are
trustworthy or not. The virt-login-shell setuid program, which
does not link to any libvirt code, will purge all environment
variables, except $TERM, before invoking the virt-login-shell-helper
program which uses libvirt.
Thus we only need one API for env passthrough in virCommand.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that none of the libvirt.so code will ever run in a setuid
context, we can remove the virIsSUID() method. The global
initializer function can just inline the check itself. The new
inlined check is slightly stronger as it also looks for a
setgid situation.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virt-login-shell setuid program is now a tiny piece of code
that only uses standard libc functions, and santizes the execution
environment before invoking the real virt-login-shell-helper.
The latter is thus able to use the normal libvirt.so build,
allowing us to delete the special cut down setuid library build.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virt-login-shell binary is a setuid program that takes
no arguments. When invoked it looks at the invoking uid,
resolves it to a username, and finds an LXC guest with the
same name. It then starts the guest and runs the shell in
side the namespaces of the container.
Given this set of tasks the virt-login-shell binary needs
to connect to libvirtd, make various other libvirt API calls.
This is a problem for setuid binaries as various libraries
that libvirt.so links to are not safe. For example, they have
constructor functions which execute an unknown amount of code
that can be influenced by env variables.
For this reason virt-login-shell doesn't use libvirt.so,
but instead links to a custom, cut down, set of source files
sufficient to be a local client only.
This introduces a problem for integrating glib2 into libvirt
though, as once integrated, there would be no way to build
virt-login-shell without an external dependancy on glib2 and
this is definitely not setuid safe.
To resolve this problem, we split the virt-login-shell binary
into two parts. The first part is setuid and does almost
nothing. It simply records the original uid+gid, and then
invokes the virt-login-shell-helper binary. Crucially when
it does this it completes scrubs all environment variables.
It is thus safe for virt-login-shell-helper to link to the
normal libvirt.so. Any things that constructor functions
do cannot be influenced by user control env vars or cli
args.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We'll shortly be renaming the binary to virt-login-shell-helper
and introducing a new tool as virt-login-shell. Renaming the
source file first gives a much more usefull diff for the next
commit.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The public API entry points will call virDispatchError which
will print to stderr by default. We then jump to a cleanup
path which calls virDispatchError again.
We tried to stop the entry points printing to stderr, but
incorrectly called virSetErrorFunc. It needs a real function
that is a no-op, not a NULL function.
Once we fix virSetErrorFunc, then we need to use fprintf in
the cleanup path instead of virDispatchError.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If the 'allowed_users' config setting in virt-login-shell.conf
does not exist, we dereference a NULL pointer resulting in a
crash. We should check for this case and thus ensure the user
is denied access gracefully.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit d2899a648 added a new exit path, but didn't free @fakerootdir.
Let's just use VIR_AUTOFREE instead to make life easier.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If virQEMUDriverGetCapabilities returns NULL, then a subsequent
deref of @caps would cause an error, so we just return failure.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The previous bump to 4.4 was done in:
commit 24241c236e
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Jul 5 10:35:32 2017 +0100
Require use of GCC 4.4 or CLang compilers
with 4.4 picked due to RHEL-6. Since we dropped RHEL-6, the
next oldest distro is RHEL-7 (4.8.5), and thus we pick 4.8
as the new min.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Until now, testDomainGetTime would always return the same fixed values
everytime it was called. By using domain-private data we can make this
API return the values previously set with testDomainSetTime, or use the
same old fixed values in case testDomainSetTime hasn't been called at all.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The qemu and vz implementations don't emit any signals when this API is
called, so we can do the same here for now and succeed by doing nothing.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The qemu driver already does some <rng> model validation, based on
qemuCaps. However, the logic for exposing <rng> model values in domcaps
is basically identical. This drops the qemuCaps checking and compares
against the domCaps data directly.
This approach makes it basically impossible to add a new <rng> model to
the qemu driver without extending domcaps. The validation can also
be shared with other drivers eventually.
Reviewed-by: Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Fill in virDomainCaps at Validate time and use it to call
virDomainCapsDeviceDefValidate
Reviewed-by: Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is an entrypoint to validate a virDomainDeviceDef against
values filled into virDomainCaps.
Currently it's just a stub
Reviewed-by: Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
qemuCaps is tied to a binary on disk. domCaps is tied to a combo
of binary+machine+arch+virttype values. For the qemu driver this almost
entirely translates to a permutation of qemuCaps though
Upcoming patches want to use the domCaps data store at XML validate
time, but we need to cache the data so we aren't repeatedly
regenerating it.
Add a domCapsCache hash table to qemuCaps. This ensures that the domCaps
cache is blown away whenever qemuCaps needs to be regenerated. Similarly
when qemuCaps is invalidated, the next call to virQEMUCapsCacheLookup
will unref qemuCaps and free our cache as well.
Adjust virQEMUDriverGetDomainCapabilities to search the cache and add
to it if we don't find a hit.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now it's just a helper for building a qemu virDomainCapsPtr,
used in qemuConnectGetDomainCapabilities
Reviewed-by: Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This way it is obvious when adding a new resource control type
that stats helper func needs to be updated too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the host doesn't have resctrl then the monitor is going to be
NULL and we must avoid dereferencing it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capabilities object must be unrefed when no longer needed.
Use VIR_AUTOUNREF() for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Current code doesn't allow us to add sub-features as we always print the
closing '/>'. As a preparatory change to implementing 'direct' sub-feature
for 'stimer' feature switch to printing closing tag individually.
No functional change.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Some Hyper-V features (like the upcoming Direct Synthetic timers) are
announced by feature bits in Edx but KVM_FEATURE_DEF() supports only Eax.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
In near future we will need to check for number of members of two
different types of lists: PCI and NVMe. Rename CHECK_LIST_COUNT
to CHECK_PCI_LIST_COUNT to mark explicitly what type of list it
is working with.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
The myInit() function is called before any of the test cases
because it prepares all internal structures for individual cases.
Well, if it fails there's no point in proceeding with testing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
I find this function more readable if checks for passed storage
source are done first and backing chain is done last. Mixing them
together does not hurt, but is less readable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
This function does not change any of the passed addresses. It
just reads them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
This function does not change any of the passed addresses. It
just reads them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
On success update the domain-private data. Consider / and /boot to be
the only mountpoints avaiable in order to be consistent with the other
FS-related calls.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
vm-specific data can be used by APIs that need to preserve some state
between calls
Some of them are:
- FS-related APIs for remembering which mountpoints are frozen
- virDomainSetTime / virDomainGetTime for maintaining time information
- virDomainSetIOThreadParams for storing the I/O thread parameters
- virDomainManagedSaveDefineXML for internally storing the VM definition
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The main value here is the current balloon value which taken from the
config. All the other values (except for period) are derived by 2^n
division so that compiler prefers bitwise operations. Period value was
kept fixed in order to produce predictable results in a test environment.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This should just forward the call to testDomainCreateXML since we
can't do anything with the provided file descriptors in the test driver.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
This should just forward the call to testDomainCreateWithFlags since we
can't do anything with the provided file descriptors in the test driver.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
The xencommons service provides all the essential services such as
xenstored, xenconsoled, etc. needed by the libvirt Xen driver, so
libvirtd should be started after xencommons.
The xendomains service uses Xen's xl tool to operate on any domains it
finds running, even those managed by libvirt. Add a conflicts on the
xendomains service to ensure it is not enabled when libvirtd is enabled.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This code that executes virPCIDeviceReattach in all
virPCIDevicePtr objects of a given virPCIDeviceListPtr
list is replicated twice in the code. Putting it in a helper
function helps with readability.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virHostdevReattachPCIDevice() is a static that simply does
a wait loop with virPCIDeviceWaitForCleanup() before
calling virPCIDeviceReattach().
This loop traces back to commit d1e5676c0d, aiming to
solve a race condition between Libvirt returning the
device back to the host and QEMU trying to access it in
the meantime, which resulted in QEMU exiting on error
and killing the guest. This happens because device_del
is asynchronous, returning OK even if the guest didn't
release the device. Commit 01abc8a1b8 moved this code
to qemu_hostdev.c, 82e8dd4cf8 added the pci-stub conditional
for the loop, 899b261127 moved the code to virhostdev.c
where it stood until now.
The intent of this wait loop is still valid: device_del
is still not bullet proof into preventing the conditions
that commit d1e5676c0d aimed to fix, especially when considering
all the architectures we must support. However, this loop
is executed only in virHostdevReattachPCIDevice(), leaving
every other virPCIDeviceReattach() call prone to that error.
Let's move the wait loop code to virPCIDeviceReattach(). This
will:
- make every reattach call safe from this race condition
with the pci-stub;
- allow for a bit of code cleanup (virHostdevReattachPCIDevice()
can be erased, and virHostdevReAttachPCIDevices() can use
virPCIDeviceReattach() directly);
- make it easier to understand the overall reattach mechanisms in
Libvirt, without the risk of a newcomer wondering why reattach
is done slightly different in some instances.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This code that executes virPCIDeviceReset in all virPCIDevicePtr
objects of a given virPCIDeviceListPtr list is replicated twice
in the code. Putting it in a helper function helps with
readability.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There is no restriction on maximum value of PCI domain. In fact,
Linux kernel uses plain atomic inc when assigning PCI domains:
drivers/pci/pci.c:static int pci_get_new_domain_nr(void)
drivers/pci/pci.c-{
drivers/pci/pci.c- return atomic_inc_return(&__domain_nr);
drivers/pci/pci.c-}
Of course, this function is called only if kernel was compiled
without PCI domain support or ACPI did not provide PCI domain.
However, QEMU still has the same restriction as us: in
set_pci_host_devaddr() QEMU checks if domain isn't greater than
0xffff. But one can argue that that's a QEMU limitation. We still
want to be able to cope with other hypervisors that don't have
this limitation (possibly).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, the way we format PCI address is using printf-s
precision, e.g. "%.4x". This works if we don't want to print any
value outside of bounds (which is usually the case). However,
turns out, PCI domain can be 0x10000 which doesn't work well with
our format strings. However, if we change the format string to
"%04x" then we still pad small values with zeroes but also we are
able to print values that are larger than four digits. In fact,
this format string used by kernel to print a PCI address:
"%04x:%02x:%02x.%d"
The other three format strings (for bus, device and function) are
changed too, so that we use the same format string as kernel.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The format string for a PCI address is copied over and over
again, often with slight adjustments. Introduce global
VIR_PCI_DEVICE_ADDRESS_FMT macro that holds the formatting string
and use it wherever possible.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In near future, the length restriction of PCI domain is going to
be lifted. This means that our assumption that PCI address is 13
bytes long is no longer true. We can avoid this problem by making
@name dynamically allocated and thus not bother with actual
length of stringified PCI address.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function declares @ret variable and then uses
VIR_STEAL_PTR() to avoid freeing temporary variable @dev which is
constructed. Well, as of 267f1e6da5 we have VIR_RETURN_PTR()
macro so that we can avoid this pattern.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While it's true that older QEMUs were not able to deal with PCI
domains, we don't support those versions anymore (see
4a42ece13a). Therefore it is safe to always format fully
expanded PCI address. Format PCI domain always as it will
simplify next commits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A new algorithm for detecting the vcpus and monitor type conflicts
between new monitor an existing allocation and monitor groups.
After refactoring, since we are verifying both @vcpus and monitor
type @tag at the same time, the validating function name has been
renamed from virDomainResctrlMonValidateVcpus to
virDomainResctrlValidateMonitor.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Export virResctrlMonitorGetStats and make
virResctrlMonitorGetCacheOccupancy obsoleted.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor 'virResctrlMonitorStats' to track multiple statistical
records.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor and rename 'virResctrlMonitorFreeStats' to
'virResctrlMonitorStatsFree' to free one
'virResctrlMonitorStatsPtr' object.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'virResctrlAllocIsEmpty' checks if cache allocation or memory
bandwidth allocation settings are specified in configuration
file. It is not proper to be used in checking memory bandwidth
allocation is specified in XML settings because this function
could not distinguish memory bandwidth allocations from cache
allocations.
Here using the local variable @n, which indicates the cache
allocation groups or memory bandwidth groups depending on the
context it is in, to decide if append a new @resctrl object.
If @n is zero and no monitors groups specified in XML, then
we should not append a new @resctrl object to @def->resctrls.
This kind of replacement is also more efficient and avoiding
a long function calling path.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Let 'virDomainResctrlVcpuMatch' to retrieve a pointer of
virDomainResctrlDefPtr in its third parameter instead
of virResctrlAllocPtr, if @vcpus is matched with the vcpus
of some resctrl allocation in list of @def->resctrls.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Creating object and judging if it is successfully created in fewer
lines.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
code cleanup for 'virDomainCachetuneDefParse' and
'virDomainMemorytuneDefParse'.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'default monitor of an allocation' is defined as the resctrl
monitor group that created along with an resctrl allocation,
which is created by resctrl file system. If the monitor group
specified in domain configuration file is happened to be a
default monitor group of an allocation, then it is not necessary
to create monitor group since it is already created. But if
an monitor group is not an allocation default group, you
should create the group under folder
'/sys/fs/resctrl/mon_groups' and fill the vcpu PIDs to 'tasks'
file.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
"virsh console" on macOS cannot attach to a domain and it doesn't matter if
it's local or remote domain:
$ ~ virsh console vm
Connected to domain vm
Escape character is ^]
error: internal error: unable to wait on console condition
The error comes from pthread_cond_wait that fails with EINVAL. The mutex
in the parent is not initialized with pthread_mutex_init and it results
in silent failure of pthead_mutex_lock and the attach failure.
Fixes: 98361cc3b9 ("tools: console: make console virLockableObject")
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In v5.6.0-rc1~347 I've mistakenly messed up news.xml as the
change I wanted to promote was added into a comment (I blame git
rebase for that). Anyway, restore the original state of the
comment so it can be copied again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
readline-devel is an optional build dependency; when it is not
present, the output of 'virsh <<EOF ... EOF' is different in that the
input provided by the user is not echoed, and prompts become
interleaved on the same line as actual output, which in turn causes
the sed doing prompt filtering to mess up:
| ./virsh-snapshot
| --- exp 2019-07-31 18:42:31.107399428 -0300
| +++ out.cooked 2019-07-31 18:42:31.108399437 -0300
| @@ -1,8 +1,3 @@
| -
| -
| -Domain snapshot s3 created from 's3.xml'
| -Domain snapshot s2 created from 's2.xml'
| -Name: s2
| Domain: test
| Current: yes
| State: running
Maybe we should fix virsh in interactive mode to echo regardless of
whether readline-devel was used, but the quicker fix is to make the
test use 'virsh "..."' rather than reading its input from stdin.
Reported-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Checkpoints are definitely a news-worthy addition, even if the
virDomainBackup API is not going to make it until a later release.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
I messed up formatting during conflict resolution across rebasing
while preparing my checkpoint patches :)
Signed-off-by: Eric Blake <eblake@redhat.com>
hv-spinlocks is not a CPUID feature and should not be checked as such.
While starting a domain with hv-spinlocks enabled, we would report a
warning about unsupported hyperv spinlocks feature even though it was
set properly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced by: commit e9528f41c6
'msrs' is a feature unrelated to Hyper-V Enlightenments, the commit message
which added it and the test have it right:
<features>
...
<msrs unknown='ignore'>
...
</features>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
SynIC stands for 'Synthetic Interrupt Controller', it is not a NIC. Fix the
spelling in accordance with Hypervisor Top Level Functional Specification.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The example XML we have contains all other Hyper-V Enlightenments but
'stimer' is missing.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
CI flagged a failing mingw build, due to:
In file included from ../../src/conf/checkpoint_conf.c:24:
../gnulib/lib/configmake.h:8:17: error: expected identifier or '(' before string constant
8 | #define DATADIR "/usr/i686-w64-mingw32/sys-root/mingw/share"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As previously learned in commits bd205a90 and 976abdf6, gnulib's
configmake.h header does #define DATADIR "string...", while mingw's
<winsock2.h> expects to declare a type named DATADIR. As long as the
mingw system header is included first before configmake.h, the two
uses do not conflict, but until gnulib is patched to make configmake.h
automatically work around the issue, our immediate fix is the
workaround of rearranging our include order to insure no conflict.
Copy the paradigm used in domain_conf.c of using <unistd.h> to trigger
the indirect inclusion of <winsock2.h> on mingw.
Fixes: 1a4df34a
Signed-off-by: Eric Blake <eblake@redhat.com>
Turning a NULL URI instead the empty string is very misleading when
reading the debug logs as the distinction between the two is
functionally important.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The recently added test27 spawns commandhelper. This is fine,
except, one of the things that commandhelper does is it records
arguments it was spawn with into commandhelper.log. Other test
cases then use checkoutput() to compare the arguments against the
expected ones and also unlink() the log file. However, test27()
is not doing that and thus it leaves the file behind. This
breaks distcheck.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These test cases will start failing once the test driver provides
implementation for the virDomainGetCPUStats API.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The returned array of qemuMonitorJobInfo structs must be freed.
164 (16 direct, 148 indirect) bytes in 1 blocks are definitely lost in loss record 64 of 84
at 0x4A3568B: realloc (vg_replace_malloc.c:826)
by 0x4D888BD: virReallocN (viralloc.c:244)
by 0x4D889B3: virExpandN (viralloc.c:293)
by 0x4D88C87: virInsertElementsN (viralloc.c:435)
by 0x214004: qemuMonitorJSONGetJobInfo (qemu_monitor_json.c:9185)
by 0x148B3F: testQueryJobs (qemumonitorjsontest.c:2979)
by 0x14C192: virTestRun (testutils.c:174)
by 0x14BF36: mymain (qemumonitorjsontest.c:3286)
by 0x14E256: virTestMain (testutils.c:1096)
by 0x14BFD9: main (qemumonitorjsontest.c:3298)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Originally the names of the KVM CPU features were only used internally
for looking up their CPUID bits. So we used "__kvm_" prefix for them to
make sure the names do not collide with normal CPU features stored in
our CPU map.
But with QEMU 4.1 we check which features were enabled or disabled by a
freshly started QEMU process using their names rather than their CPUID
bits (mostly because of MSR features). Thus we need to change our made
up internal names into the actual names used by QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most of the internally defined KVM CPUID features are not actually used
by libvirt. The QEMU driver may enable or disable them on the command
line, but we don't check for the associated CPU properties or CPUID
bits. They would be useless with QEMU 4.1 anyway since their names were
only remotely similar to the actual feature names.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All the features are hyperv features even though they are provided by
KVM with QEMU. The "KVM" part in the macro names does not make a lot of
sense.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting with QEMU 4.1, we're using the canonical feature names on the
command line and avoid aliases to prepare for possible deprecation of
all aliases in QEMU. But we do so only for features from our CPU map,
hyperv features defined in the code were unchanged and this patch fixes
it. Some features use "hv-" prefix unconditionally because they were
introduced recently enough to always support spelling with a dash.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally the names of the hyperv CPU features were only used
internally for looking up their CPUID bits. So we used "__kvm_hv_"
prefix for them to make sure the names do not collide with normal CPU
features stored in our CPU map.
But with QEMU 4.1 we check which features were enabled or disabled by a
freshly started QEMU process using their names rather than their CPUID
bits (mostly because of MSR features). Thus we need to change our made
up internal names into the actual names used by QEMU. Most of the names
are only used with QEMU 4.1 and newer and the reset was introduced with
QEMU recently enough to already support spelling with "-". Thus we don't
need to define them as "hv_*" with a translation to "hv-*" for new QEMU.
Without this patch libvirt would mistakenly report all hyperv features
as unavailable and refuse to start any domain using them with QEMU 4.1.
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Earlier patches mentioned that the initial implementation will prevent
snapshots and checkpoints from being used on the same domain at once.
However, the actual restriction is done in this separate patch to make
it easier to lift that restriction via a revert, when we are finally
ready to tackle that integration in the future.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Time to actually issue the QMP transactions that create and delete
persistent checkpoints, resolving TODOs intentionally left earlier in
the series. For create, we only need one transaction: inside, we
visit all disks affected by the checkpoint, and create a new enabled
bitmap, as well as disabling the bitmap of the first ancestor
checkpoint (if any) that also had a bitmap. For deletion, we need
multiple QMP calls: for each disk, if there is an ancestor checkpoint
with a bitmap, then the bitmap must be merged (including activating
the ancestor bitmap if the leaf node changes), all before deleting the
bitmap from the checkpoint being removed.
Signed-off-by: Eric Blake <eblake@redhat.com>
Qemu bitmap operations require knowing the node name associated with
the format layer (the qcow2 file); as upcoming patches will be
grabbing that information frequently, make a helper function to access
it.
Another potential benefit of this function is that we have a single
place where we could insert a QMP node-name scraping call if we don't
currently know the node name, when -blockdev is not supported;
however, the goal is that we hopefully don't ever have to do that
because we instead scrape node names only at the point where they
change.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A lot of this work heavily copies from the existing snapshot APIs.
What's more, this patch is (intentionally) very similar to the
checkpoint code just added in the test driver, to the point that qemu
checkpoints are not fully usable in this patch, but it at least
bisects and builds cleanly. The separation between patches is done
because the grunt work of saving and restoring XML and tracking
relations between checkpoints is common to the test driver, while the
later patch adding integration with QMP is specific to qemu.
Also note that the interlocking to prevent checkpoints and snapshots
from existing at the same time will be a separate patch, to make it
easier to revert that restriction when we finally round out the design
for supporting interaction between the two concepts.
Signed-off-by: Eric Blake <eblake@redhat.com>
This is similar to the existing directory for snapshots; the domain
will save one xml file per checkpoint, for reloading on the next
libvirtd restart. Fortunately, since checkpoints mandate RNG
validation, we are assured that the checkpoint name will be usable as
a file name (no abuse of '../escape' as a checkpoint name, for
example).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce the handler for finalizing a block commit and active bloc
commit job which will allow to use it with blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce the handler for finalizing a block pull job which will allow
to use it with blockdev.
This patch also contains some additional machinery which is required to
store all the relevant job data in the status XML which will also be
reused with other block job types.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In case of an incoming migration we do not need to run swtpm_setup
with all the parameters but only want to get the benefit of it
creating a TPM state file for us that we can then label with an
SELinux label. The actual state will be overwritten by the in-
coming state. So we have to pass an indicator for incomingMigration
all the way to the command line parameter generation for swtpm_setup.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Similar to virsh-snapshots. Provides decent coverage of the checkpoint
API, the test driver implementation, and the virsh access to the API.
A later patch will worry about testing that snapshots and checkpoints
are mutually exclusive (in part so it is easier to revert that when we
finally implement the interaction and lift that restriction).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A lot of this work heavily copies from the existing snapshot APIs.
The test driver doesn't really have to do anything more than just
expose an interface into libvirt metadata, making it possible to test
saving and restoring XML, and tracking relations between multiple
checkpoints.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a bunch of new virsh commands for managing checkpoints in
isolation. More commands are needed for performing incremental
backups, but these commands were easy to implement by modeling heavily
after virsh-snapshot.c. There is no need for checkpoint-revert or
checkpoint-current since those snapshot APIs have no checkpoint
counterpart. Similarly, it is not necessary to change which
checkpoint is current when redefining from XML, since until we
integrate checkpoints with snapshots, there is only a linear chain
(and you can deduce the current checkpoint by instead using
'checkpoint-list --leaves'). Other aspects of checkpoint-list are
also a bit simpler than the snapshot counterpart, in part because we
don't have to cater to back-compat to older API.
Upcoming patches will test these interfaces once the test driver
supports checkpoints.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The remote code generator had to be taught about the new
virDomainCheckpointPtr type, at which point the remote driver code for
checkpoints can be generated.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Creating a checkpoint does not modify guest-visible state,
but does modify host resources. Rather than reuse existing
domain:write, domain:block_write, or domain:snapshot access
controls, it seems better to introduce a new access control
specific to tasks related to checkpoints and incremental
backups of guest disk state.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Wire up the use of a checkpoint list into each domain, similar to the
existing snapshot list. This includes adding a function for checking
that a redefine operation fits in with the existing list, as well as
various filtering capabilities over the list contents.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Create a new file for managing a list of checkpoint objects, borrowing
heavily from existing virDomainSnapshotObjList paradigms.
Note that while snapshots definitely have a use case for multiple
children to a single parent (create a base snapshot, create a child
snapshot, revert to the base, then create another child snapshot),
it's harder to predict how checkpoints will play out with reverting to
prior points in time. Thus, in initial use, given a list of
checkpoints, you never have more than one child, and we can treat the
most-recent leaf node as the parent of the next node creation, without
having to expose a notion of a current node in XML or public API.
However, as the snapshot machinery is already generic, it is easier to
reuse the generic machinery that tracks relations between domain
moments than it is to open-code a new list-management scheme just for
checkpoints (hence, we still have internal functions related to a
current checkpoint, even though that has no observable effect
externally, as well as the addition of a function to easily find the
lone leaf in the list to use as the current checkpoint).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a new file checkpoint_conf.c that performs the translation to and
from new XML describing a checkpoint. The code shares a common base
class with snapshots, since a checkpoint similarly represents the
domain state at a moment in time. Add some basic testing of round trip
XML handling through the new code.
Of note - this code intentionally differs from snapshots in that XML
schema validation is unconditional, rather than based on a public API
flag. We have many existing interfaces that still need to add a flag
for opt-in schema validation, but those interfaces have existing
clients that may not have been producing strictly-compliant XML, or we
may still uncover bugs where our RNG grammar is inconsistent with our
code (where omitting the opt-in flag allows existing apps to keep
working while waiting for an RNG patch). But since checkpoints are
brand-new, it's easier to ensure the code matches the schema by always
using the schema. If needed, a later patch could extend the API and
add a flag to turn on to request schema validation, rather than having
it forced (possibly just the validation of the <domain> sub-element
during REDEFINE) - but if a user encounters XML that looks like it
should be good but fails to validate with our RNG schema, they would
either have to upgrade to a new libvirt that adds the new flag, or
upgrade to a new libvirt that fixes the RNG schema, which implies
adding such a flag won't help much.
Also, the redefine flag requires the <domain> sub-element to be
present, rather than catering to historical back-compat to older
versions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that various new API have been added or are coming soon, it is
worth a landing page that gives an overview of capturing various
pieces of guest state, and which APIs are best suited to which tasks.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a bunch of new public APIs related to backup checkpoints.
Checkpoints are modeled heavily after virDomainSnapshotPtr (both
represent a point in time of the guest), although a snapshot exists
with the intent of rolling back to that state, while a checkpoint
exists to make it possible to create an incremental backup at a later
time. We may have a future hypervisor that can completely manage
checkpoints without libvirt metadata, but the first two planned
hypervisors (qemu and test) both always use libvirt for tracking
metadata relations between checkpoints, so for now, I've deferred
the counterpart of virDomainSnapshotHasMetadata for a separate
API addition at a later date if there is ever a need for it.
Note that until we allow snapshots and checkpoints to exist
simultaneously on the same domain (although the actual prevention of
this will be in a separate patch for the sake of an easier revert down
the road), that it is not possible to branch out to create more than
one checkpoint child to a given parent, although it may become
possible later when we revert to a snapshot that coincides with a
checkpoint. This also means that for now, the decision of which
checkpoint becomes the parent of a newly created one is the only
checkpoint with no child (so while there are APIs for dealing with a
current snapshot, we do not need those for checkpoints). We may end
up exposing a notion of a current checkpoint later, but it's easier to
add stuff when proven needed than to blindly support it now and wish
we hadn't exposed it.
The following map shows the API relations to snapshots, with new APIs
on the right:
Operate on a domain object to create/redefine a child:
virDomainSnapshotCreateXML virDomainCheckpointCreateXML
Operate on a child object for lifetime management:
virDomainSnapshotDelete virDomainCheckpointDelete
virDomainSnapshotFree virDomainCheckpointFree
virDomainSnapshotRef virDomainCheckpointRef
Operate on a child object to learn more about it:
virDomainSnapshotGetXMLDesc virDomainCheckpointGetXMLDesc
virDomainSnapshotGetConnect virDomainCheckpointGetConnect
virDomainSnapshotGetDomain virDomainCheckpointGetDomain
virDomainSnapshotGetName virDomainCheckpiontGetName
virDomainSnapshotGetParent virDomainCheckpiontGetParent
virDomainSnapshotHasMetadata (deferred for later)
virDomainSnapshotIsCurrent (no counterpart, see note above)
Operate on a domain object to list all children:
virDomainSnapshotNum (no counterparts, these are the old
virDomainSnapshotListNames racy interfaces)
virDomainSnapshotListAllSnapshots virDomainListAllCheckpoints
Operate on a child object to list descendents:
virDomainSnapshotNumChildren (no counterparts, these are the old
virDomainSnapshotListChildrenNames racy interfaces)
virDomainSnapshotListAllChildren virDomainCheckpointListAllChildren
Operate on a domain to locate a particular child:
virDomainSnapshotLookupByName virDomainCheckpointLookupByName
virDomainSnapshotCurrent (no counterpart, see note above)
virDomainHasCurrentSnapshot (no counterpart, old racy interface)
Operate on a snapshot to roll back to earlier state:
virDomainSnapshotRevert (no counterpart, instead checkpoints
are used in incremental backups via
XML to virDomainBackupBegin)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Prepare for new checkpoint APIs by describing the XML that will
represent a checkpoint. The checkpoint XML is modeled heavily after
virDomainSnapshotPtr. See the docs for more details.
Add testsuite coverage for some minimal uses of the XML (bare minimum,
the sample from html, and a full dumpxml, and some counter-examples
that should fail schema validation). Although use of the REDEFINE flag
will require the <domain> subelement to be present, it is easier for
most of the tests to provide counterpart output produced with the
NO_DOMAIN flag (particularly since synthesizing a valid <domain>
during testing is not trivial).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If we are using -blockdev, then node names are always available
(because we set them). But when not using it, we have to scrape node
names from QMP, and want to do so as infrequently as possible. We
were scraping node names after reconnecting a new libvirtd to an
existing guest (see qemuProcessReconnect), and after any block job
that may have changed the set of node names we care about (legacy
block jobs), but forgot to scrape the names when first starting a
guest. Do so now in order to allow the checkpoint code to always have
access to a node name without having to repeat a node name scrape
itself.
Future patches may need to clean up qemuDomainSetBlockThreshold (if
node names are always available, then it doesn't need to repeat a
scrape) and/or hotplug and media changes (if the addition of new nodes
can result in a null node name, then scraping at that point in time
would be appropriate). But for now, this patch addresses only the
most common instance of a missing node name.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Set the transactionStarted to false if the commit failed. If this is not
done, then the failure path will report 'no transaction is set' and hide
more useful error reports.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190726210706.24440-2-stefanb@linux.ibm.com>
Creating an 'exp' output file, but never comparing it against the
actual output, does not actually constitute testing the output. :)
Fixes: 280a2b41e
Signed-off-by: Eric Blake <eblake@redhat.com>
Starting with QEMU 4.1 qemuMonitorCPUModelInfo structure in virQEMUCaps
stores only canonical feature names which may differ from the name used
by libvirt. We need translate these canonical names into libvirt names
for further consumption.
This fixes a bug in qemuConnectBaselineHypervisorCPU which would remove
all features for which libvirt's spelling differs from the QEMU's
preferred name. For example, the following result of
qemuConnectBaselineHypervisorCPU on my host with QEMU 4.1 is wrong:
<cpu mode='custom' match='exact'>
<model fallback='forbid'>Skylake-Client</model>
<vendor>Intel</vendor>
<feature policy='require' name='ss'/>
<feature policy='require' name='vmx'/>
<feature policy='require' name='hypervisor'/>
<feature policy='require' name='clflushopt'/>
<feature policy='require' name='umip'/>
<feature policy='require' name='arch-capabilities'/>
<feature policy='require' name='xsaves'/>
<feature policy='require' name='pdpe1gb'/>
<feature policy='require' name='invtsc'/>
<feature policy='disable' name='pclmuldq'/>
<feature policy='disable' name='lahf_lm'/>
</cpu>
The 'pclmuldq' and 'lahf_lm' should not be disabled in the baseline CPU
as they are supported by QEMU on this host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Describe the encryption element in the TPM's domain XML.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since swtpm does not support getting started without password
once it was created with encryption enabled, we don't allow
encryption to be removed. Similarly, we do not allow encryption
to be added once swtpm has run. We also prevent chaning the type
of the TPM backend since the encrypted state is still around and
the next time one was to switch back to the emulator backend
and forgot the encryption the TPM would not work.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This patch now passes the passphrase as a migration key to swtpm.
This now encrypts the state of the TPM while a VM is migrated between
hosts or when suspended into a file. Since the migration key secret
is the same as the state encryption secret, this now requires that
the migration destination host has the same secret value.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow vTPM state encryption when swtpm_setup and swtpm support
passing a passphrase using a file descriptor.
This patch enables the encryption of the vTPM state only. It does
not encrypt the state during migration, so the destination secret
does not need to have the same password at this point.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a test case to commandtest.c to test the transfer of data to a
process who received the read-end of pipes' file descriptors. Transfer
large (128 kb) byte streams.
Extend the commandhelper.c with support for --readfd <fd> command line
parameter and convert the data receive loop to use poll and receive data
on multiple file descriptors (up to 3) and read data into distinct buffers
that we grow while adding more (string) data.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Extend virCommandProcessIO to include the send buffers in the poll
loop.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Mark a virCommand's inpipe (write-end of pipe) as non-blocking so that it
will never block when we were to try to write too many bytes to it while
it doesn't have the capacity to hold them.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the struct pollfd *fds to be allocated rather than residing
on the stack. This prepares it for the next patch where the size of
the array of fds becomes dynamic.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Implement virCommandSetSendBuffer() that allows the caller to pass a
file descriptor and buffer to virCommand. virCommand will write the
buffer into the file descriptor. That file descriptor could be the
write end of a pipe or one of the file descriptors of a socketpair.
The other file descriptor should be passed to the launched process to
read the data from.
Only implement the function to allocate memory for send buffers
and to free them later on.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Run 'swtpm socket --print-capabilities' and
'swtpm_setup --print-capabilities' to get the JSON object of the
features the programs are supporting and parse them into a bitmap.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Check whether previously found executables were updated and if
so look for them again. This helps to use updated features of
swtpm and its tools upon updating them.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Refactor virTPMEmulatorInit to use a loop with parameters. This allows
for easier extension later on.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Move qemuTPMEmulatorInit to virTPMEmulatorInit in virtpm.c and introduce
a few functions to query the executables needed for virCommands.
Add locking to protect the tool paths and return a copy of the tool paths
to callers wanting to access them so that we can run the initialization
function multiples time later on and detect when the executable gets updated.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Extend the TPM device XML parser and XML generator with emulator
state encryption support.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for usage type vTPM to secret.
Extend the schema for the Secret to support the vTPM usage type
and add a test case for parsing the Secret with usage type vTPM.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The README contains a reference to GPL 2.1, which does not exist.
COPYING contains 2.0 so change the README to follow.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When using the ENUM macros, the compiler guards that the declaration
and implementation are in sync.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
We don't need domain_conf or libvirt-{qemu,lxc} in these generic files.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
qemuBlockJobRewriteConfigDiskSource rewrites the disk source only
according to the 'target'. This means that if someone would change the
inactive config of the VM to refer to a different disk a block job would
rewrite it when finishing a job which modifies the disk source.
Make sure that this does not happen by verifying that the source of the
config disk is the same.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Since we copy everything from the original storage source including some
runtime data which are not relevant for the config we should clear them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Both active block commit and block copy modify the disk source of the
active definition and thus also must modify the corresponding inactive
definition source so that the VM starts up later. This is currently
implemented in the legacy block job handler but the logic will be useful
also for the new handlers. Split it out which also simplifies it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
The <mirror> subelement is used in two ways: in a commit job to point to
existing storage, and in a block-copy job to point to additional
storage. We need a way to track only the distinct storage.
This patch introduces qemuBlockJobDiskRegisterMirror which registers the
mirror chain separately only for jobs which require it. This also comes
with remembering that in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Add 4 disks to the blockjob-blockdev-in.xml test case to allow adding
data for block pull, block copy, block commit, and active block commit
jobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Commit c412383796 used a value from wrong enum when setting the disk's
mirrorState variable. This meant that a 'READY' job would show up as
'PIVOTING'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
When returning to asynchronous block job handling the flag which
determines the handling method should be reset prior to flushing
outstanding events. If there's an event to process the handler may
invoke the monitor and another event may be received. We'd not process
that one. Reset the flag earlier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainSnapshotDiskDataCollect copies the source of the disk from the
live config into the inactive config. Move this operation earlier so
that if we initialize it for use for the particular instance the
run-time-only data is not copied.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In case when the backing store can be represented with something
simpler such as a URI we can use it rather than falling back to the
json: pseudo-protocol.
In cases when it's not worth it (e.g. with the old ugly NBD or RBD
strings) let's switch to json.
The function is exported as we'll need it when overwriting the ugly
strings qemu would come up with during blockjobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The block commit API checked 'disk->src->path' to see whether there
is a reasonable disk source to be committed. As the top image can be
e.g. backed by NBD the check is not good enough. Replace it by
virStorageSourceIsEmpty.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For the modern use cases we are going to use 'blockdev-snapshot' instead
of 'blockdev-snapshot-sync'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuBuildStorageSourceChainAttachPrepareBlockdev prepares the full
backing chain for attachment via blockdev. For snapshots we'll need to
prepare one image only as it needs to be plugged on top of the existing
chain.
This patch introduces qemuBuildStorageSourceChainAttachPrepareBlockdevTop
which prepares only @top similarly to the original function by splitting
out the functionality into an internal function so that the API does not
change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 042c95bd19 qemuBuildStorageSourceChainAttachPrepareBlockdev
was added but the comment for the function mentions
qemuBuildStorageSourceChainAttachPrepareDrive. Fix the mistake.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we track the job separately we watch only for the abort of the
one single block job so the comment is no longer accurate. Also
describing asynchronous operation is not really necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With -blockdev:
- we track the job and check it after restart
- have the ability to ask qemu to persist it to collect result
- have the ability to report errors.
This solves all points the comment outlined so remove it. Also all jobs
handle the disk state modification along with the event so there's
nothing special the comment says.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use job-complete/job-abort instead of the blockjob-* variants for
blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As the error message is now available and we know whether the job failed
we can report an error straight away rather than having the user check
the event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Set the correct job states after the operation is requested in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When initiating a pivot or abort of a block job we need to track which
one was initiated. Currently it was done via data stashed in
virDomainDiskDef. Add possibility to track this also together with the
job itself.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Do decisions based on the configuration of the job rather than the data
stored with the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the stored job name rather than passing in the disk alias when
referring to the job which allows the same code to work also when
-blockdev will be used.
Note that this API does not require the change to use 'query-job' as it
will ever only work with blockjobs bound to disks due to the arguments
which allow only referring to a disk. For the disk-less jobs we'll need
to add a separate API later.
The change to qemuMonitorGetBlockJobInfo is required as the API was
stripping the 'drive-' prefix when returning the data which is not
desired any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cgroups v2 when a new group is created by default no controller is
enabled so the detection code will not detect any controllers.
When enabling the controllers we should also store them for the group.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
When creating new group for cgroups v2 the we cannot check
cgroups.controllers for that cgroup because the directory is created
later. In that case we should check cgroups.subtree_control of parent
group to get list of controllers enabled for child cgroups.
In order to achieve that we will prefer the parent group if it exists,
the current group will be used only for root group.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The virsh-optparse test broke after commit 6ac402c456 because it
always assumed the max memory limit can be adjusted on a running domain
which used to be the case in the old code.
This is only a hot fix for the CI build. The proper fix here is to
re-write the whole test in a self-test/unit-test manner where we only
test virsh's ability to parse various values, not running actual
commands.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
When commit 6ac402c456 added the API whenever VIR_DOMAIN_MEM_MAXIMUM
was passed the code always checked whether the domain was active and
therefore failed with an error even though only a config change was
requested. Fix the issue by replacing virDomainObjGetOneDef with
virDomainObjGetOneDefState which tells us what definition we're
performing the change on.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Commit d5572f62e3 forgot to add maxthreads to the non-Linux definition
of the function, thus breaking the MinGW build.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Changes noticed while copying to similar aspects of checkpoints.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Any message that is easy to trigger (as evidenced by the testsuite
update) should not use 'internal error' as its category.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virDomainSnapshotFindByName(list, NULL) should return NULL, rather
than the internal-use-only metaroot. Most existing callers pass in a
non-NULL name; the few external callers that don't are immediately
calling virDomainMomentSetParent (which indeed needs the metaroot
rather than NULL if the parent name is NULL); but as the leaky
abstraction is ugly, it is worth instead making
virDomainMomentSetParent static and adding a new function for
resolving the parent link of a brand new moment within its list. The
existing external uses of virDomainMomentSetParent always succeed
(either the new moment has parent_name of NULL to become a new root,
or has parent_name set to a strdup of the previous current moment);
hence, our new function does not need a return value (but it still has
a VIR_WARN in case future uses break our assumptions about failure
being impossible).
Missed when commit 02c4e24d refactored things to attempt to remove
direct metaroot manipulations out of the qemu and test drivers into
internal-only details, and made more obvious when commit dc8d3dc6
factored it out into a separate file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some VM configurations may result in a large number of threads created by
the associated qemu process which can exceed the system default limit. The
maximum number of threads allowed per process is controlled by the pids
cgroup controller and is set to 16k when creating VMs with systemd's
machined service. The maximum number of threads per process is recorded
in the pids.max file under the machine's pids controller cgroup hierarchy,
e.g.
$cgrp-mnt/pids/machine.slice/machine-qemu\\x2d1\\x2dtest.scope/pids.max
Maximum threads per process is controlled with the TasksMax property of
the systemd scope for the machine. This patch adds an option to qemu.conf
which can be used to override the maximum number of threads allowed per
qemu process. If the value of option is greater than zero, it will be set
in the TasksMax property of the machine's scope after creating the machine.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Update the current or max memory, on the persistent or live definition
depending on the flags which are currently ignored.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Make the test driver only support the VIR_TYPED_PARAM_STRING flag for
now.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If the dup2 fails, then we aren't going to get the correct result.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Avoid the chance that sysconf(_SC_OPEN_MAX) returns -1 and thus
would cause virBitmapNew would attempt to allocate a very large
bitmap.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Avoid the chance that qemuMonitorTestNewSimple could return NULL
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
It's already dereffed in the initialization and shouldn't be NULL
unless virJSONValueArraySize after a virJSONValueObjectGetArray
could return a NULL data entry.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Ever since --parallel-connections option for virsh migrate was
introduced we did not properly check the return value of
vshCommandOptInt. We would set VIR_MIGRATE_PARAM_PARALLEL_CONNECTIONS
parameter even if vshCommandOptInt returned 0 (which means
--parallel-connections was not specified) when another int option which
was checked earlier was specified with a nonzero value.
Specifically, running virsh migrate with either
--auto-converge-increment, --auto-converge-initial, --comp-mt-dthreads,
--comp-mt-threads, or --comp-mt-level would set
VIR_MIGRATE_PARAM_PARALLEL_CONNECTIONS parameter and if --parallel
option was not used, libvirt would complain
error: invalid argument: Turn parallel migration on to tune it
even though --parallel-connections option was not used at all.
https://bugzilla.redhat.com/show_bug.cgi?id=1726643
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Report in logs when we don't find existing block job data and create it
just to handle the job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While this function does start a block job in case when we'd not be able
to get our internal data for it, the handler sets the job state to
QEMU_BLOCKJOB_STATE_RUNNING anyways, thus qemuBlockJobStartupFinalize
would just unref the job.
Since the other usage of qemuBlockJobStartupFinalize in the other part
of the event handler was a bug replace this one anyways even if it would
not cause problems.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The block job event handler qemuProcessHandleBlockJob looks at the block
job data to see whether the job requires synchronous handling. Since the
block job event may arrive before we continue the job handling (if the
job has no data to copy) we could hit the state when the job is still
set as QEMU_BLOCKJOB_STATE_NEW (as we move it to the
QEMU_BLOCKJOB_STATE_RUNNING state only after returning from monitor).
If the event handler uses qemuBlockJobStartupFinalize it would
unregister and free the job. Thankfully this is not a big problem for
legacy blockjobs as we don't need much data for them but since we'd
re-instantiate the job data structure we'd report wrong job type for
active commit as qemu reports it as a regular commit job.
Fix it by not using qemuBlockJobStartupFinalize function in
qemuProcessHandleBlockJob as it is not starting the job anyways.
https://bugzilla.redhat.com/show_bug.cgi?id=1721375
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virCgroupRemove return -1 when removing cgroup failed.
But there are retry code to remove cgroup in QemuProcessStop:
retry:
if ((ret = qemuRemoveCgroup(vm)) < 0) {
if (ret == -EBUSY && (retries++ < 5)) {
usleep(200*1000);
goto retry;
}
VIR_WARN("Failed to remove cgroup for %s",
vm->def->name);
}
The return value of qemuRemoveCgroup will never be equal to "-EBUSY",
so change the return value of virCgroupRemove if failed.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Shutting down the daemon after 30 seconds of being idle is a little bit
too aggressive. Especially when using 'virsh' in single-shot mode, as
opposed to interactive shell mode, it would not be unusual to have
more than 30 seconds between commands. This will lead to the daemon
shutting down and starting up between a series of commands.
Increasing the shutdown timer to 2 minutes will make it less likely that
the daemon will shutdown while the user is in the middle of a series of
commands.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of having each caller pass in the desired logfile name, pass in
the binary name instead. The logging code can then just derive a logfile
name by appending ".log".
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This adds detection of a Quobyte as a shared file system for live
migration.
Signed-off-by: Silvan Kaiser <silvan@quobyte.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have two functions: virPCIDeviceAddressIsEqual() defined only
on Linux and virPCIDeviceAddressEqual() defined everywhere. And
both of them do the same. Drop the former in favour of the
latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When removing the disk fronted while any block job is still active we
need to transfer the ownership of the backing chain to the job itself as
the job still holds the reference to the chain members and thus attempts
to remove them would fail.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when the disk frontend was unplugged while a blockjob was
running the blockjob inherits the backing chain. When the blockjob is
then terminated we need to unplug the chain as it will not be used any
more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The PR manager is a property of the format layer in qemu so we need to
be able to track it also in the chains of orphaned block jobs.
Add a helper for qemu to look also into the blockjob state.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When the guest unplugs the disk frontend libvirt is responsible for
deleting the backend. Since a blockjob may still have a reference to the
backing chain when it is running we'll have to store the metadata for
the unplugged disk for future reference.
This patch adds 'chain' and 'mirrorChain' fields to 'qemuBlockJobData'
to keep them around with the job along with status XML machinery and
tests. Later patches will then add code to change the ownership of the
chain when unplugging the disk backend.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refresh the state of the jobs and process any events that might have
happened while libvirt was not running.
The job state processing requires some care to figure out if a job
needs to be bumped.
For any invalid job try doing our best to cancel it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the infrastructure to handle block job events in the -blockdev era.
Some complexity is required as qemu does not bother to notify whether
the job was concluded successfully or failed. Thus it's necessary to
re-query the monitor.
To minimize the possibility of stuck jobs save the state into the XML
prior to handling everything so that the reconnect code can potentially
continue with the cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add support for handling the event either synchronously or
asynchronously using the event thread.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With blockdev we'll need to use the JOB_STATUS_CHANGE so gate the old
events by the blockdev capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new state is entered when qemu finished the job but libvirt does
not know whether it was successful or not.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the blockjob handling code deals with the status XML we don't
need to save it explicitly when starting blockjobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that block job data is stored in the status XML portion we need to
make sure that everything which changes the state also saves the status
XML. The job registering function is used while parsing the status XML
so in that case we need to skip the XML saving.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to store the block job state in the status XML so that we can
properly recover any data when reconnecting after startup and also in
the end to be able to do any transition of the backing chain that
happened while libvirt was not connected to the monitor.
First step is to note the name, type, state and corresponding disk into
the status XML.
We also need to make sure that a broken blockjob does not make libvirt
lose the VM, thus many of the errors just mark the job as invalid.
Later on we'll cancel all invalid jobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The job data saved in the XML may be partially invalid e.g. if something
is missing. To prevent losing a domain with such a job add a flag to the
job data so that job APIs can ignore such a job and we can just cancel
it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When parsing the status XML we need to register all existing jobs.
Export the functions so that they are usable in other modules.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Later on we'll format these values into the status XML so the from/to
string functions will come handy. The implementation also notes that
these will be used in the status XML to avoid somebody changing the
values.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the job structure to the table when instantiating a new job and
remove it when it terminates/fails.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Block jobs currently belong to disks only so we can look up the block
job data for them in the corresponding disks. This won't be the case
when using blockdev as certain jobs don't even correspond to a disk and
most of them can run on a part of the backing chain.
Add a global table of blockjobs which can be used to look up the data
for the blockjobs when the job events need to be processed.
The table is a hash table organized by job name and has a reference to
the job. New and running jobs will later be added to this table.
Reference counting will allow to reap job state for synchronous callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The legacy job handler does not look at the old job state so we can
update it earlier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need to do it if the job is not completed. The new helper
allows to do this with much less hassle in the correct place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename and move qemuBlockJobTerminate to qemuBlockJobUnregister and
separate bits from qemuBlockJobDiskNew which register the job with the
disk. This creates an unified interface for other APIs to use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to qemuDomainSaveStatus add a helper to save the config XML
named qemuDomainSaveConfig.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename qemuDomainObjSaveJob and create a wrapper for it which does not
require 'driver' to be passed and export it so that other palces can
easily save the status XML without having to invoke virDomainSaveStatus
which has unpleasing parameters.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Test the output against the schema and also against what we expect.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tests will need to parse such a definition so it also needs to be freed.
Provide a function for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU allows us to create storage on certain network protocols which
allow image creation through their API. Wire up the generator for using
it with libvirt as well as for local files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'blockdev-add' allows us to use qemu to format images to our desired
format. This patch implements helpers which convert a
virStorageSourcePtr into JSON objects describing the required
configuration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow using -blockdev with blockjobs QEMU needs to reopen files in
read-write mode when modifying the backing chain. To achieve this we
need to use 'auto-read-only' for the backing files rather than the
normal 'read-only' property. That way qemu knows that the files need to
be reopened.
Note that the format drivers (e.g. qcow2) are still opened with the
read-only property enabled when being a member of the backing chain
since they are supposed to be immutable unless a block job is started.
QEMU v4.0 (since commit 23dece19da4) allows also dynamic behaviour for
auto-read-only which allows us to use sVirt as we only grant write
permissions to files when doing a blockjob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow reusing the formatters in the code for creating JSON properties
for 'blockdev-create' we need to create everything except the 'driver'
attribute.
Use the new helper virJSONValueObjectPrependString to put the driver at
the same place so that we don't change any output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirt treats the JSON objects as lists thus the values appear in the
order they were added. To avoid too much changes introduce a helper
which allows to prepend a string which will allow to keep certain
outputs in order.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add testing of the host specification part so that we can be sure that
no image/host specific data will be present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When formatting new qcow2 images we need to provide the backing store
string which should not contain any authentication or irrelevant data.
Add a flag for qemuBlockStorageSourceGetBackendProps which allows to
skip the irrelevant data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'blockdev-create' starts a job which creates a storage volume using
the given protocol or formats an existing (added) volume with one of the
supported storage formats.
This patch adds the monitor interaction bits.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new event is a superset of the BLOCK_JOB* events and also covers
jobs which don't bind to a VM disk.
In this patch the monitor part is implemented.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This belongs to the new job management API which can manage also
non-block based jobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This belongs to the new job management API which can manage also
non-block based jobs. Since we'll need to be able to attempt to cancel
jobs which potentially were not started (during reconnect) the 'quiet'
flag allows to suppress errors reported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This belongs to the new job management API for generic jobs.
The dismiss command is meant to remove a concluded job after we were
able to get the final status.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow using the delayed dismiss of the job so that we can reap the state
even if libvirtd was not running when qemu emitted the job completion
event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow using the node name to specify the base and top of the 'commit'
operation, allow specifying explicit job name and add support for
delayed dismiss of the job so that we can reap the state even if
libvirtd was not running when qemu emitted the job completion event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow using the node name to specify the base of the 'stream' operation,
allow specifying explicit job name and add support for delayed dismiss
of the job so that we can reap the state even if libvirtd was not
running when qemu emitted the job completion event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When querying storage metadata after a block job we re-run
virStorageFileGetMetadata on the top level storage file. This means that
the workers (virStorageFileGetMetadataInternal) must not overwrite any
pointers without freeing them.
This was not considered for src->compat and src->features. Fix it and
add a comment mentioning that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function does not do any cleanup, so replace the 'cleanup' label
with return of -1 and the 'done' label with return of 0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since fb9f6ce625 we are including a libxml header file in the
network driver but never link with it. This hasn't caused an
immediate problem because in the end the network driver links
with libvirt.la. But apparently, it's causing a build issue on
old Ubuntu.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a very simple completer for completing --cap argument of
nodedev-list command.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There are more arguments than 'shutdown --mode' that accept a
list of strings separated by commas. 'nodedev-list --cap' is one
of them. To avoid duplicating code, let's separate interesting
bits of virshDomainShutdownModeCompleter() into a function that
can then be reused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If there are two paths on the list that are the same we need to
lock it only once. Because when we try to lock it the second time
then open() fails. And if it didn't, locking it the second time
would fail for sure. After all, it is sufficient to lock all
paths just once satisfy the caller.
Reported-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Document why we need to sort paths while it's still fresh in my
memory.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This commit is similar with 596aa144. It fixes an uninitialized
variable to avoid garbage value. This case, it uses time 't' 0 if
an error occurs with virTimeMillisNowRaw.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pass an xmlopt argument through all the needed network conf
functions, like is done for domain XML handling. No functional
change for now
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Just a stub for now that is unused. Add init+cleanup plumbing and
demostrate it in bridge_driver.c
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Wrap each release headline in an <a> element with the id set
to the release value and page.xsl will take care of the rest.
Reported-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Having a translation enum full of empty strings seems excessive.
Now that the validiation is performed in qemuDomainDeviceDefValidateFS,
remove it completely and open-code the two allowed cases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Introduce two separate variables instead of reusing the same one
for clarity.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This function iterates over all filesystems, not just -fsdevs.
Rename it to free the name for a function that actually builds fsdevs.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Use the existing fs9p.xml and fs9p-ccw.xml to run the tests
with latest caps on x86_64 and s390x.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
When spawning a child process, between fork() and exec() we close
all file descriptors and keep only those the caller wants us to
pass onto the child. The problem is how we do that. Currently, we
get the limit of opened files and then iterate through each one
of them and either close() it or make it survive exec(). This
approach is suboptimal (although, not that much in default
configurations where the limit is pretty low - 1024). We have
/proc where we can learn what FDs we hold open and thus we can
selectively close only those.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I will optimize this code a bit in the next commit. But for that
it is better if the code lives in a separate function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Test if our parsing of interface stats as returned by ovs-vsctl
works as expected. To achieve this without having to mock
virCommand* I'm separating parsing of stats into a separate
function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We run 'ovs-vsctl' nine times (first to find if interface is
there and then eight times = for each stats member separately).
This is very inefficient. I've found a way to run it once and
with a bit of help from virJSON module we can parse out stats
we need.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On Debian derived distros "localhost" can resolve to the normal
"127.0.0.1" and "::1", but it can also resolve to "127.0.1.1"
Rewrite the code so that it doesn't assume a fixed number of IPs.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Typo meant we use 'nodedev' instead of 'interface'. This doesn't hurt
libvirtd because if a process tries to acquire a lock it already holds
it will succeed. It fails when nodedev & interface drivers are in
separate daemons though.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When the drivers acquire their pidfile lock we don't want to wait if the
lock is already held. We need the driver to immediately report error,
causing the daemon to exit.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ideally, a software that's translating domain names would iterate
over all addresses the NSS returned, but some software does not
bother (e.g. ping). What happens is that for instance when
installing a guest, it's assigned one IP address but once it's
installed and rebooted it gets a different IP address (because
client ID used for the first DHCP traffic when installing the
guest was generated dynamically and never saved so after reboot
the guest generated new ID which resulted in different IP address
to be assigned). This results in 'ping $domain' not working
properly as it still pings the old IP address. Well, it might -
NSS plugin does not guarantee any order of addresses.
To resolve this problem, we can sort the array just before
returning it to the caller (ping) so that the newer IP addresses
come before older ones.
Reported-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In the nss plugin we have ERROR() macro which by default does
nothing. However, at compile time it can be made to report errors
(this is useful for debugging because by nature of NSS debugging
is hard). Anyway, the appendAddr() function uses @name (which
contains name the caller wants us to resolve) for error
reporting. But the caller findLeaseInJSON() is not passing it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
VHD images can be used as any other, so we should add them to the list
of types that virt-aa-helper can read when creating the per-guest rules
for backing files.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
When validating a domain among all the checks there are two that
concern VIR_DOMAIN_LOADER_TYPE_PFLASH specifically. The first
check ensures that on x86 ACPI is enabled when UEFI is requested,
the second ensures that UEFI is used when ACPI is requested on
aarch64. However, check for UEFI is done by plain comparison of
def->os.loader->type which is insufficient because we have
def->os.firmware too.
NB, this wouldn't be a problem for active domain, because on
startup process def->os.loader->type gets filled by
qemuFirmwareEnableFeatures(), but that's not the case for
inactive domains.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1729604
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Split up the addition of a storage source into the following sub-steps:
1) storage access dependencies (TLS transport, persistent reservation)
2) storage acccess node (file/gluster/nbd...)
3) format driver dependencies (encryption secret)
4) format driver node (qcow2, raw, ...)
The functions split out will be later reused when implementing support
for 'blockdev-create' as we'll need the dependencies plugged in first,
then blockdev-create will be called and after that successfully finishes
blockdev-add will be added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add separate booleans for extracting VIR_DOMAIN_BLOCK_COPY_REUSE_EXT and
VIR_DOMAIN_BLOCK_COPY_SHALLOW from '@flags' and also change 'reuse' into
'existing'.
qemuMonitorDriveMirror requires the unmodified state of the flags to
pass to qemu and also we use the value a few times internally. Extract
it separately now.
The 'reuse' flag did not indicate reusing of the file as much as the
fact that the storage is existing and thus should not be created, so
modify the name to reflect this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With -blockdev it will be possible that a block job loses the disk that
was used to start it to a guest-initiated hot-unplug. Don't emit the
block job events in that case as we can't report the top level source or
disk target for an unplugged (and potentially replugged with different
source) disk.
Eventually when we add machinery for tracking jobs globally for a VM the
event will be reinstated via the domain job event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
job->newstate is now used internally all the time so there's no need to
clear it as it already has correct value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update schema and configuration to allow specifying new video type of
'bochs'. Add implementation and tests for qemu.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Check whether qemu supports the bochs-display device and set a
capability. Update tests.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The code to check whether a redefined snapshot/checkpoint XML is
attempting to create a cycle in the list of moments is lengthy, and
common between the two types of list. Therefore, it belongs in the
shared base file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
With systemd activation the passed in file descriptors are required to
be numbered from STDERR_FILENO + 1 onwards. The unit tests thus require
FDs 3, 4 and 5 to be available.
This may not be the case in all environments in which the tests run. For
example on RHEL7 it was seen that a library constructor (gcrypt probably)
opens /dev/urandom and leaves the file handle open. This means FD 3 is
not available and the activation tests fail.
The best way to deal with this would be to create a standalone helper
program for the tests, but that's much more work than just skipping the
tests if we notice we have the problem.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The use of the virNetServerAutoShutdownFunc typedef was removed in
commit 79b8a56995
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Oct 31 19:03:55 2012 +0000
Replace polling for active VMs with signalling by drivers
This unused typedef was then copied into the virNetDaemon object
when that was split off from virNetServer, resulting in a typedef
virNetDaemonAutoShutdownFunc that has never been needed.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The new systemd activation APIs mean there is no longer a need to get
the UNIX socket path associated with a plain FD.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virGetListenFDs method no longer needs to be called directly, so it
can be a static function internal to the systemd code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Using the new system activation APIs allows for simpler code setting up
the network services.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Using the new system activation APIs allows for simpler code setting up
the network services.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only use of this code was removed by:
commit be78814ae0
Author: Michal Privoznik <mprivozn@redhat.com>
Date: Thu Apr 2 14:41:17 2015 +0200
virNetSocketNewConnectUNIX: Use flocks when spawning a daemon
less than a year after it was first introduced in
commit 1b807f92db
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Wed Jul 16 08:00:19 2014 +0200
rpc: pass listen FD to the daemon being started
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Certain libvirtd.conf settings are not honoured when using systemd
socket activation.
Certain systemd unit file settings must match those defined in
libvirtd.conf for systemd socket activation to work with systemd
version < 227, otherwise libvirtd cannot determine which inherited
FD to use for which service.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since we have socket activation available now, we can let the system
libvirtd exit when it is idle. This allows it to still do autostart
when the host boots up, but when nothing was started it will quickly
exit again until some mgmt app connects to the socket.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We don't do socket activation of libvirtd, since we need to
unconditionally start libvirtd in order to perform autostart. This
doesn't mean we can't have systemd socket units. Some use cases will
not need libvirt's autostart & are thus free to use activation.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNetServerServiceNewFDOrUNIX method cannot be correctly used when
dealing with systemd activation of a service which can receive more than
one socket FD as there is not guaranteed ordering of FDs.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current libvirtd code for systemd socket activation assumes socket
FDs are passed in the order unix-rw, unix-ro, unix-admin. There is in
fact no ordering guarantee made by systemd. Applications are expected
to check the address or name associated with each FD to figure out its
identity.
This rewrites libvirtd to make use of the new systemd activation APIs
to make it robust wrt socket ordering changes.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently code has to first create the service and then separately
register it with the server. If the socket associated with a particular
service is not passed from systemd we want to skip creating the service
altogether. This means we can't put the systemd activation logic into
the constructors for virNetServerService.
This patch thus creates some helper methods against virNetServer which
combine systemd activation, service creation and service registration
into one single operation. This operation is automatically a no-op if
systemd activation is present and no sockets were passed in.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the socket code will unlink any UNIX socket path which is
associated with a server socket. This is not fine grained enough, as we
need to avoid unlinking server sockets we were passed by systemd.
To deal with this we must explicitly track whether each socket needs to
be unlinked when closed, separately of the client vs server state.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNetServerServiceNewFD API only accepts a single FD, but it is
easily changed to allow for an array of FDs to be passed in.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a virNetServerServiceNewSocket API that allows the various
constructors to share more code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When receiving multiple FDs from systemd during service activation it is
neccessary to identify which purpose each FD is used for. While this
could be inferred by looking for the specific IP ports or UNIX socket
paths, this requires the systemd config to always match what is expected
by the code. Using systemd FD names we can remove this restriction and
simply identify FDs based on an arbitrary name.
The FD names are passed by systemd in the LISTEN_FDNAMES env variable
which is populated with the socket unit file names, unless overriden
by using the FileDescriptorName setting.
This is supported since the system 227 release and unfortunately RHEL7
lacks this version. Thus the code has some back compat support whereby
we look at the TCP ports or the UNIX socket paths to identify what
socket maps to which name. This back compat code is written such that
is it easly deleted when we are able to mandate newer systemd.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When the service passed to getaddrinfo is NULL the kernel will choose a
free port to bind to. In a dual stack though we will get separate
sockets for IPv4 and IPv6 and we need them to bind to the same port
number. Thus once the kerel has auto-selected a port for the first
socket, we must disable auto-select for subsequent IP sockets and force
reuse of the first port.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 035db37394
Even though we only allow using RBD with raw volumes,
removing the options and the default format causes our
parser not to fill out the volume format and the backend code
rejects creating a non-raw volume.
Re-introduce the volume options to fix volume creation while
erroring out on requests to use non-raw formats.
https://bugzilla.redhat.com/show_bug.cgi?id=1724065
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If there are more than 16 images, the memory allocated in images
might be leaked on subsequent execution(s).
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In preparation for adding the bochs display device, refactor the logic
so that each branch handles a single device type and checks its
parameters within that branch. In this case VGA and VMVGA are still
grouped into the same branch since they share device-specific parameter
names.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The cleanup label in virNetworkObjDeletePort() function serves no
purpose. Drop it and thus simplify the function a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The cleanup label in virNetworkObjAddPort() function serves no
purpose. Drop it and thus simplify the function a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The virNetworkObjGetPortStatusDir() function allocates a memory
to construct a path. None of the callers free it leading to a
memleak.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The virtlogd config is set to rollover logs every 2 MB.
Normally a logrotate config file is also installed to handle cases where
virtlogd is disabled. This is set to rollover weekly with no size
constraint.
As a result logrotate can interfere with virtlogd's, rolling over files
that virtlogd has already taken care of.
This changes logrotate configs to rollover based on a max size
constraint of 2 MB + 1 byte. When virtlogd is running the log files will
never get this large, making logrotate a no-op.
If the user changes the size in virtlogd's config to something larger,
they are responsible for also changing the logrotate config suitably.
The LXC/libxl drivers don't use virtlogd, but there logrotate config is
altered to match the QEMU driver config, for the sake of consistency.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Way back in the past, the "no_tty=1" option was added for the remote
driver to disable local password prompting by disabling use of the local
tty:
commit b32f429849
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Fri Sep 21 20:17:09 2007 +0000
Added a no_tty param to remote URIs to stop SSH prompting for password
This was done by adding "-T -o BatchMode=yes -e none" args to ssh. This
achieved the desired results but is none the less semantically flawed
because it is mixing up config parameters for the local tty vs the
remote tty.
The "-T" arg stops allocation of a TTY on the remote host. This is good
for all libvirt SSH tunnels as we never require a TTY for our usage
model, so we should have just passed this unconditionally.
The "-e none" option disables the escape character for sessions with a
TTY. If we pass "-T" this is not required, but it also not harmful to
add it, so we should just pass it unconditionally too.
Only the "-o BatchMode=yes" option is related to disabling local
password prompts and thus needs control via the no_tty URI param.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For quite some time now it is impossible to connect to a domain
using a HMP monitor, so there is no point in formatting it in the status
XML.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The getservent() APIs are not re-entrant safe so cannot be used in any
threaded program. Add a wrapper around getaddrinfo() for resolving the
service names to a port number.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It doesn't make sense to have the admin socket active if the main
socket is not running, so bind their lifecycle together.
This ensures that if primary socket is stopped, the corresponding
admin socket is also stopped.
In the reverse, starting the admin socket will also automatically
start the primary socket.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The split is mostly arbitrary, but we purposefully moved
the mips64el builds off sid since currently that container
is failing to build and is thus unavailable.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We really need to change this so that it fetches the image
list dynamically from Quay, but for the time being at least
make sure the static list is accurate.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Up until now, our images have been tagged as "master" instead
of the default "latest" due to the way the build process
worked, but we're using the default now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/bhyve/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/bhyve/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/vz/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/vz/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/lxc/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/lxc/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/libxl/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/libxl/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
No supported build targets for libvirt still ship xend, so there is no
need for the libxl driver to check for it anymore.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/nwfilter/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/nwfilter/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/interface/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/interface/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/nodedev/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/nodedev/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/storage/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/storage/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/network/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/network/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/secrets/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/secrets/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/qemu/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/qemu/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We've been doing a terrible job of performing XML validation in our
various API that parse XML with a corresponding schema (we started
with domains back in commit dd69a14f, v1.2.12, but didn't catch all
domain-related APIs, didn't document the use of the flag, and didn't
cover other XML). New APIs (like checkpoints) should do the validation
unconditionally, but it doesn't hurt to continue retrofitting existing
APIs to at least allow the option.
While there are many APIs that could be improved, this patch focuses
on wiring up a new snapshot XML creation flag through all the
hypervisors that support snapshots, as well as exposing it in 'virsh
snapshot-create'. For 'virsh snapshot-create-as', we blindly set the
flag without a command-line option, since the XML we create from the
command line should generally always comply (note that validation
might cause failures where it used to succeed, such as if we tighten
the RNG to reject a name of '../\n'); but blindly passing the flag
means we also have to add in fallback code to disable validation if
the server is too old to understand the flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Similar to VIR_DOMAIN_DEF_PARSE_VALIDATE_SCHEMA; the next patch will
put it to use with a counterpart public API flag.
No need to change qemudomainsnapshotxml2xmltest to use the flag, since
the testsuite already has a separate virschematest that does the same.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
We no longer need to special-case xenUnified, since 1dac5fbbbb
dropped support for that naming scheme.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Previous commit:
commit faceedaf71
Author: Jonathon Jongsma <jjongsma@redhat.com>
Date: Tue Jun 18 11:13:12 2019 -0500
src/vz: use #pragma once in headers
accidentally chomped the "#" in a "#define" when re-indenting
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Support for the modern CPU_ALLOC macros was added 10 years ago in
commit a73cd93b24
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Nov 16 16:08:29 2009 +0000
Alternate CPU affinity impl to cope with NR_CPUS > 1024
This is long enough that we can assume it always exists and drop the
back compat code.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The previously added AMD SEV doc was not linked from anywhere on the
website. Address this by introducing a new "Knowledge base" section
that can hold task oriented guide to various features. Moving the SEV,
disk locking and secure usage guides under this section.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Continuous integration caught that although 'make syntax-check' was
sufficient to let me be aware that I had to change bhyve to use
s/virDomainShutdownEnsureACL/virDomainShutdownFlagsEnsureACL/, it was
not sufficient to note which ACL functions require 2 vs. 3 arguments
for flag validation.
Fixes: eded8aad
Signed-off-by: Eric Blake <eblake@redhat.com>
The @oldDef variable in libxlAddDom0() is not used really. Drop
it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Even though we don't accept any flags, it is unfriendly to callers
that use the modern API to have to fall back to the flag-free API.
Note that virDomainBlockStats does not trivially forward to
virDomainBlockStatsFlags, so that one is omitted for now.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Even though we don't accept any flags, it is unfriendly to callers
that use the modern API to have to fall back to the flag-free API.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Even though we don't accept any flags, it is unfriendly to callers
that use the modern API to have to fall back to the flag-free API.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Even though we don't accept any flags, it is unfriendly to callers
that use the modern API to have to fall back to the flag-free API.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
When only geteuid() is mocked, the test crashes on Debian 10.
Fatal: failed to reset uid: No such file or directory
Program received signal SIGABRT, Aborted.
__GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
(gdb) t a a bt
Thread 1 (Thread 0x7ffff3b3e080 (LWP 12003)):
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
#1 0x00007ffff7798535 in __GI_abort () at abort.c:79
#2 0x00007ffff485ca20 in _gcry_logv (level=level@entry=40, fmt=fmt@entry=0x7ffff4929126 "failed to reset uid: %s\n", arg_ptr=arg_ptr@entry=0x7fffffffe4a0) at ../../src/misc.c:142
#3 0x00007ffff485cd61 in _gcry_log_fatal (fmt=fmt@entry=0x7ffff4929126 "failed to reset uid: %s\n") at ../../src/misc.c:218
#4 0x00007ffff48639d1 in lock_pool_pages (n=<optimized out>, p=<optimized out>) at ../../src/secmem.c:340
#5 _gcry_secmem_init_internal (n=<optimized out>) at ../../src/secmem.c:563
#6 0x00007ffff4863d78 in _gcry_secmem_init (n=4096) at ../../src/secmem.c:581
#7 0x00007ffff485e4e6 in _gcry_vcontrol (cmd=<optimized out>, arg_ptr=arg_ptr@entry=0x7fffffffe5e0) at ../../src/global.c:506
#8 0x00007ffff485a789 in gcry_control (cmd=cmd@entry=GCRYCTL_INIT_SECMEM) at ../../src/visibility.c:79
#9 0x00007ffff71af10f in ssh_crypto_init () at ./src/libgcrypt.c:621
#10 0x00007ffff7193796 in _ssh_init (constructor=constructor@entry=1) at ./src/init.c:79
#11 0x00007ffff71834de in libssh_constructor () at ./src/init.c:116
#12 0x00007ffff7fe437a in call_init (l=<optimized out>, argc=argc@entry=1, argv=argv@entry=0x7fffffffe778, env=env@entry=0x7fffffffe788) at dl-init.c:72
#13 0x00007ffff7fe4476 in call_init (env=0x7fffffffe788, argv=0x7fffffffe778, argc=1, l=<optimized out>) at dl-init.c:30
#14 _dl_init (main_map=0x7ffff7ffe190, argc=1, argv=0x7fffffffe778, env=0x7fffffffe788) at dl-init.c:119
#15 0x00007ffff7fd60ca in _dl_start_user () from /lib64/ld-linux-x86-64.so.2
#16 0x0000000000000001 in ?? ()
#17 0x00007fffffffea26 in ?? ()
#18 0x0000000000000000 in ?? ()
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virsh snapshot-create-as supports 'file' storage type in --diskspec by default.
But it doesn't support 'block' storage type in the virshParseSnapshotDiskspec().
So if a snapshot on a block device (e.g. LV) was created, the type of
current running storage source in dumpxml is inconsistent with the actual
backend storage source. It will check file-system type mismatch failed
and return an error message of 'Migration without shared storage is unsafe'
when VM performs a live migration after this snapshot.
Considering virsh has to be able to work remotely that recognizing a block device
by prefix /dev/ or by stat() may be not suitable, so adding a "stype" field
for the --diskspec string which will be either "file" or "block".
e.g. --diskspec vda,snapshot=external,driver=qcow2,stype=block,file=/dev/xxx.
Signed-off-by: Liu Dayu <liu.dayu@zte.com.cn>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Now that we no longer support sexpr conversion to the internal config we
can drop the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We've dropped old xend support over a year ago. At this point we can
also drop support for parsing very old configs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use new coding style to merge the only use of xenFormatSxprSound into
the caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test was the only place calling 'xenFormatSxpr'. Drop it as there
are no other users of that code since we've dropped xend support in
commit 1dac5fbbbb.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The docs talked about an active snapshot when they meant an active
domain; they also claimed the flag was a no-op for hypervisors with no
snapshot metadata even though the flag is currently rejected as
unrecognized for hypervisors with no snapshot support at all. A later
patch may teach more drivers to ignore the flag as a no-op, but that
shouldn't conflict with the wording chosen here (since a new client
talking to an old server still runs into the same issue, even if a
newer server becomes more tolerant).
Reported-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Make it obvious that the domainsnapshotxml2xml test is only run when
compiling in support for qemu.
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The virConnectGetType() method has an unfortunate signature, returning a
static string that must not be freed by the caller. The remote driver,
however, gets this string dynamically over an RPC call, which raised a
design discussion on the mailing list. Eventually the problem was
resolved by having the remote driver cache the returned string
internally and free it when the connection was closed.
The link to the mailing list is thus talking about a problem that does
not actually exist in the final implementation, and at best serves to
confuse the reader into thinking there might be a memory leak.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Neither the sasl_client_init or sasl_server_init methods are even
remotely threadsafe. They do a bunch of one-time initialization and
merely use a simple integer counter to avoid repeated work, not even
using atomic increment/reads on the counter. This can easily race in a
threaded program. Protect the calls using a virOnce initializer function
which is guaranteed threadsafe at least from libvirt's POV.
If the application using libvirt also uses another library that makes
use of SASL then the race still exists. It is impossible to fix that
fully except in SASL code itself.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 44b8df4cb4 introduced a check for yajl.pc that is
extremely similar to the one we already had in place for
readline.pc - so similar, in fact, that it's still looking
for readline.pc instead of yajl.pc :)
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Similar to commit a487890d for qemu, a little bit of refactoring in
the snapshot delete code will make it easier to reuse functionality
for checkpoints.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The 'tty' variable is only used on Win32. Instead of just annotating it
with ATTRIBUTE_UNUSED, make its declaration conditional on WIN32 so that
it is clear why it is not used.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Simplify the clean code paths for doRemoteOpen by using VIR_AUTOFREE
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The doRemoteOpen method was a little unusual in declaring a bunch of
local variables in the middle of the function. Move them to the top as
it is normal libvirt style.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The qemusecuritytest is failing on FreeBSD 11/12, reporting that files
are not correctly restored. Debugging code printfs show that the
virFileGetXAttrQuiet mock is returning 0, but the virFileGetXAttr
function is seeing -1 as the return value.
Essentially there appears to be some kind of optimization between the
real virFileGetXAttrQuiet and the real virFileGetXAttr, which breaks
when we mock virFileGetXAttrQuiet. Rather than trying to figure out
how to avoid this, it is simpler to just mock virFileGetXAttr too
since it is very short code.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is an error path that jumps over the initialization of
nerrors, and the jump target reads the variable contents.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Zero out the user provided memory in order to avoid potentially freeing
uninitialized memory.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The LIBVIRTD_CONFIGURATION_FILE constant was introduced in
commit b7c42619e6
Author: Richard W.M. Jones <rjones@redhat.com>
Date: Mon Jun 11 11:43:41 2007 +0000
Mon Jun 11 12:41:00 BST 2007 Richard W.M. Jones <rjones@redhat.com>
and then never used !
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The LIBVIRTD_CONFIG and LIBVIRTD_NOFILES_LIMIT parameters were only
honoured when using the sysvinit scripts. This was removed already in
commit 912fe2df9d
Author: Andrea Bolognani <abologna@redhat.com>
Date: Fri Mar 15 16:47:27 2019 +0100
Drop support for "Red Hat" init scripts
so the parameters can safely be dropped.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The sysvinit script was previously removed in
commit 912fe2df9d
Author: Andrea Bolognani <abologna@redhat.com>
Date: Fri Mar 15 16:47:27 2019 +0100
Drop support for "Red Hat" init scripts
A make rule was accidentally left behind.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are probably more situations where they could be taken
advantage of, but these are very obvious scenarios because we
either manage to get rid of a bunch of explicit capabilities,
or we make a bunch of related test cases all use the macros
by switching the only odd one out.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Right now we have macros such as DO_TEST_CAPS_LATEST_PARSE_ERROR()
and DO_TEST_CAPS_ARCH_VER(), but there is no concise way to say
"using this version of QEMU on this architecture will result in a
failure".
This commit adds
DO_TEST_CAPS_ARCH_LATEST_FAILURE()
DO_TEST_CAPS_ARCH_VER_FAILURE()
DO_TEST_CAPS_ARCH_LATEST_PARSE_ERROR()
DO_TEST_CAPS_ARCH_VER_PARSE_ERROR()
and reworks
DO_TEST_CAPS_LATEST_FAILURE()
DO_TEST_CAPS_LATEST_PARSE_ERROR()
to use the corresponding DO_CAPS_TEST_ARCH_*() macros instead of
using DO_TEST_CAPS_ARCH_LATEST_FULL() directly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It mirrors the existing DO_TEST_CAPS_ARCH_LATEST_FULL(), and is
now used to implement DO_TEST_CAPS_ARCH_VER().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make sure the order is consistent between xml2argv and xml2xml,
and make room for more macros that are going to be introduced
shortly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently the flags argument is completely ignored, but it should be
checked for any unsupported flags that might have been passed.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Always return / and /boot as the mount points imitating the default
Fedora installation. Use the first disk found, otherwise if no disk
device of type VIR_DOMAIN_DISK_DEVICE_DISK is present, return 0 mount
points.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Calling virDomainObjUpdateModificationImpact directly inside the
function body is redundant, since the same function call is embedded
into virDomainObjGetOneDef.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There are some paths (e.g. /dev/vfio/vfio or /dev/mapper/control)
which are defined in qemu_domain.c and then in qemu_cgroup.c
again. This is suboptimal. Let's move paths into qemu_domain.h and
drop duplicate definitions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In my review of 89320788ac I've simplified assigning disk errors
too much as the code I've changed it to will set
VIR_DOMAIN_DISK_ERROR_NONE. This is in contradiction with our
documentation which specifies that disks with no errors are not
reported.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
If something goes wrong in testDomainGetDiskErrors() then we try
to free any strings that were previously allocated in return
array. Problem is, in my review of original patch (89320788ac)
I've mistakenly did some changes which result in possible NULL
dereference (@vm is set to NULL as the first thing under cleanup
label).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
A simple helper function that would be used from DAC and SELinux
drivers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The purpose of this API is to allow caller move XATTRs (or remove
them) from one file to another. This will be needed when moving
top level of disk chain (either by introducing new HEAD or
removing it).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This effectively reverts d7420430ce and adds new code.
Here is the problem: Imagine a file X that is to be shared
between two domains as a disk. Let the first domain (vm1) have
seclabel remembering turned on and the other (vm2) has it turned
off. Assume that both domains will run under the same user, but
the original owner of X is different (i.e. trying to access X
without relabelling leads to EPERM).
Let's start vm1 first. This will cause X to be relabelled and to
gain new attributes:
trusted.libvirt.security.ref_dac="1"
trusted.libvirt.security.dac="$originalOwner"
When vm2 is started, X will again be relabelled, but since the
new label is the same as X already has (because of vm1) nothing
changes and vm1 and vm2 can access X just fine. Note that no
XATTR is changed (especially the refcounter keeps its value of 1)
because the vm2 domain has the feature turned off.
Now, vm1 is shut off and vm2 continues running. In seclabel
restore process we would get to X and since its refcounter is 1
we would restore the $originalOwner on it. But this is unsafe to
do because vm2 is still using X (remember the assumption that
$originalOwner and vm2's seclabel are distinct?).
The problem is that refcounter stored in XATTRs doesn't reflect
the actual times a resource is in use. Since I don't see any easy
way around it let's just not store original owner on shared
resources. Shared resource in world of domain disks is:
- whole backing chain but the top layer,
- read only disk (we don't require CDROM to be explicitly
marked as shareable),
- disk marked as shareable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some paths will not be restored. Because we can't possibly know
if they are still in use or not. Reflect this in the test so that
we can test more domains. Also see next commit for more detailed
explanation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Just like previous commit allowed to enable or disable owner
remembering for each individual path, do the same for SELinux
driver. This is going to be needed in the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
One caller in particular (virSecurityDACSetImageLabelInternal)
will want to have the feature turned on only in some cases.
Introduce @remember member to _virSecurityDACChownItem to track
whether caller wants to do owner remembering or not.
The actual remembering is then enabled if both caller wanted it
and the feature is turned on in the config file.
Technically, we could skip over paths that don't have remember
enabled when creating a list of paths to lock. We won't touch
their XATTRs after all. Well, I rather play it safe and keep them
on the locking list for now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Both DAC and SELinux drivers support transactions. Each item on
the transaction list consists of various variables and @restore
is one of them. Document it so that as the list of variables grow
it's easier to spot which variable does what.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The way that virSecurityDACRecallLabel is currently written is
that if XATTRs are not supported for given path to the caller
this is not different than if the path is still in use. The value
of 1 is returned which makes secdrivers skip label restore.
This is clearly a bug as we are not restoring labels on say NFS
even though previously we were.
Strictly speaking, changes to virSecurityDACRememberLabel are not
needed, but they are done anyway so that getter and setter behave
in the same fashion.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It's better to have the function report errors, because none of
the callers does.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It's better to have the function report errors, because none of
the callers does.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The way that security drivers use XATTR is kind of verbose. If
error reporting was left for caller then the caller would end up
even more verbose.
There are two places where we do not want to report error if
virFileGetXAttr fails. Therefore virFileGetXAttrQuiet is
introduced as an alternative that doesn't report errors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Just like it's DAC counterpart is doing,
virSecuritySELinuxRestoreAllLabel() could print @migrated in the
debug message.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, there's no reason to enumerate all XATTRs since they
differ only in the prefix and we can construct them in a loop.
Secondly, and more importantly, the script was still looking for
just one prefix "trusted.libvirt.security" even on FreeBSD.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Having to enumerate all capabilities that we want domain to have
is too verbose and prevents us from adding more tests. Have the
domain always have the latest x86_64 capabilities. This means
that we have to drop two arm tests, but on the other hand, I'm
introducing 50 new cases. I've listed 50 biggest .args files and
added those:
libvirt.git $ ls -Sr $(find tests/qemuxml2argvdata/ \
-type f -iname "*.x86_64-latest.args") | tail -n 50
Except for two:
1) disk-backing-chains-noindex - this XML has some disks with
backing chain. And since set is done on the whole backing chain
and restore only on the top layer this would lead to instant test
failure. Don't worry, secdrivers will be fixed shortly too and
the test case will be added.
2) hostdev-mdev-display-spice-egl-headless - for this XML
secdriver tries to find IOMMU group that mdev lives in. Since we
are not mocking sysfs access this test case would fail.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This simplifies the code a bit and removes the need for cleanup
label in one case. In the other case the label is kept because
it's going to be used later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The @securityManager variable in testDomain() is unused. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Problem with current approach is that if
qemuSecuritySetAllLabel() fails, then the @chown_paths and
@xattr_paths hash tables are not freed and preserve values
already stored there into the next test case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
I don't really know what happened when I was writing the original
code, but even if error was to be set the corresponding boolean
was set to false meaning no error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
One of the functions of this mock is that it spoofs chown() and
stat() calls. But it is doing so in a clever way: it stores the
new owner on chown() and reports it on subsequent stat(). This is
done by using a 32bit unsigned integer where one half is used to
store uid the other is for gid. Later, when stat() is called the
integer is fetched and split into halves again. Well, my bit
operation skills are poor and the code I've written does not do
that properly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This test is beautiful. It checks if we haven't messed up
refcounting on security labels (well, XATTRs where the original
owner is stored). It does this by setting up tracking of XATTR
setting/removing into a hash table, then calling
qemuSecuritySetAllLabel() followed by immediate
qemuSecurityRestoreAllLabel() at which point, the hash table must
be empty. The test so beautifully written that no matter
what you do it won't fail. The reason is that all seclabel work
is done in a child process. Therefore, the hash table in the
parent is never changed and thus always empty.
There are two reasons for forking (only one of them makes sense
here though):
1) namespaces - when chown()-ing a file we have to fork() and
make the child enter desired namespace,
2) locking - because of exclusive access to XATTRs we lock the
files we chown() and this is done in a fork (see 207860927a for
more info).
While we want to fork in real world, we don't want that in a test
suite. Override virProcessRunInFork() then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 5a148ce84 altered the virNetServerNew to remove a parameter
but neglected to update the ATTRIBUTE_NONNULL's which causes a build
failure for when checking is enabled such as when lv_cv_static_analysis
is enabled.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We have been grouping network-port and nwfilter-binding permissions
under virNetworkPtr and virNWFilterPtr respectively.
Add the two missing classes that were matched because they contain
a substring of others.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It has been dropped in 215d9393bb, but not all of
the documentation was updated accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This reverts commit 7bca1c9bdc.
As it turns out it's not a good idea on systemd hosts. The root
cgroup can have all controllers enabled but they don't have to be
enabled for sub-cgroups.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit 226094fbc4.
A deprecation is a warning to something that use of a feature is
being discouraged. By definition it is not an error condition to
continue to use a deprecated feature.
A VIR_ERR_DEPRECATED constant thus makes no conceptual sense. For
features which are entirely absent we already document that the
VIR_ERR_NO_SUPPORT code will be used. There is no need to distinguish
between a feature which never existed and a feature which previously
existed and was since removed.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The public API entry points will report VIR_ERR_NO_SUPPORT to the
caller when a driver does not provide an implementation of a particular
method.
When deleting methods, leaving the driver API entry point explicitly
set to NULL with an version range comment, allows the hvsupport.html
page to document when the AP was removed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since c257352797 a reference of 'cfg' would be leaked if the function
does not need to process anything. Fix it by using VIR_AUTOUNREF.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
when a disk without PR perform attach or detach operation,
need not call qemuHotplugRemoveManagedPR, otherwise, it will
print err log about PR, let us fix it.
Signed-off-by: Jie Wang <wangjie88@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The sys/sysctl.h header is only needed on BSD platforms to get
the sysctlbyname() function declaration. On Linux we talk to
procfs instead to change sysctls.
Unfortunately a legacy sys/sysctl.h header does exist on Linux
and including it has recently started triggering a deprecation
warning from glibc.
Protect its inclusion with a HAVE_SYSCTLBYNAME check instead
so that it only gets used on platforms where we need that
function declaration.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When detecting available controllers on host we can be limited by list
of controllers from qemu.conf file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently CPU controller cannot be enabled if there is any real-time
task running and is assigned to non-root cgroup which is the case on
several distributions with graphical environment.
Instead of erroring out treat it as the controller is not available.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In order to skip controllers that we are not able to activate we need
to return different return value so the caller can decide what to do.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It might happen that we are not able to enable CPU controller so we
can enable it for thread sub-cgroups only if it's available in parent
cgroup.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The assumption that CPU controller would be always enabled is wrong, we
should use any available controller to create a new sub-cgroup.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This affects only cgroups v2 where enabled controllers are not based on
available mount points but on the list provided in cgroup.controllers
file. However, moving it will fill in placement as well, so it needs
to be freed together with mount point if we don't need that controller.
Before this patch we were assuming that all controllers available in
root cgroup where available in all other sub-cgroups which was wrong.
In order to fix it we need to move the cgroup controllers detection
after cgroup placement was prepared in order to build correct path for
cgroup.controllers file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In cgroups v2 we don't have to detect available controllers every single
time if we are creating a new cgroup based on parent cgroup.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our code would skip adding the default type in this cases, but since we
know that the only reasonable option here is 'fat' we can add it while
starting the VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The storage volume may in fact convert into a directory when starting
the VM so that it may be actually possible to use it.
This is a regression caused by c9b27af32d as moving the check to
validation time without adjustment causes problems as the volumes are
not translated yet.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuBuildDriveSourceStr omits the disk format string when we are
emulating a 'fat' filesystem from a directory. The logic should decide
based on the 'actualType' as a disk type=pool may be converted to a
directory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virStorageSourceGetActualType would return VIR_STORAGE_TYPE_NONE in case
when a virStorageSource of (top level) type VIR_STORAGE_TYPE_VOLUME was
not prepared to use by the vm by calling
virDomainDiskTranslateSourcePool.
Fix this issue by returning VIR_STORAGE_TYPE_VOLUME in case when the
volume was not translated yet.
Additionally also add documentation for the function describing the
quirk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We didn't do this earlier because the DO_TEST_CAPS_ARCH_LATEST()
macro was limited to qemuxml2argv until recently.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support for this has only relatively recently been added to
virt-manager.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the latest virt-manager to regenerate the files.
The command line is once again along the lines of
$ virt-install \
--name guest --os-variant fedora29 \
--vcpus 4 --memory 4096 --disk size=5 \
--graphics (none|vnc) \
--print-xml
with some minor tweaks performed afterwards.
This removes a number of inconsistencies between the files,
and makes it so the only differences are actually relevant
either to the architecture and machine type at hand, or to
having graphics rather than being headless.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Right now *-headless and *-graphics tests are using different
quoting styles, which results in the diff between them being
basically useless, whereas we would like it to be possible to
compare these files directly and easily spot the differences.
Convert all *-graphics tests to single quotes, which is the
style libvirt itself uses when formatting XML: this is a fact
that will come in handy later.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When changing media using blockdev-add we need to remove the leftovers
if we didn't succeed plugging in the full chain or closing the tray.
Otherwise the data structures will be freed and thus the backing chain
members will never be unplugged.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As this conversion removes the last use of qemuHotplugDiskSource*
functions we can remove all of them now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new helpers for removing the backing chain in case when
-blockdev is used. For -drive this function has a local implementation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the use of qemuHotplugDiskSourceAttach* helpers with
qemuBuildStorageSourceChainAttachPrepare(Blockdev|Drive).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the open-coded local implementation with
qemuBuildStorageSourceChainAttachPrepare(Drive|Blockdev).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These are meant to replace the ad-hoc helpers qemuHotplugDiskSourceAttach...
and the open-coded version in qemu_command.c for use in command line
generation.
The functions for preparing for attach of chains unfortunately need to
be in qemu_command.c as they use function defined by that file and
inclusion hierarchy.
In this patch new functions are introduced and subsequent patches then
refactor individual parts to use them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We use only one copy-on-read filter per disk, so we should handle it
separately from the chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move it to qemu_block.c and call it qemuBlockStorageSourceDetachPrepare.
It will be reused in other parts as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We've deprecated qemuConnectDomainXMLFromNative qemuDomainQemuAttach.
Switch the error code from VIR_ERR_OPERATION_UNSUPPORTED to the new
VIR_ERR_DEPRECATED.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow a simple programatic check that a given feature is no longer
supported by introducing a separate error code for this scenario.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit a7fb2258 added sanitization of storage pool target paths,
however source dir paths were left unsanitized.
A netfs pool with:
<source>
<host name='10.20.30.40'/>
<dir path='/nfs/'/>
</source>
will not be correctly detected as mounted by
virStorageBackendFileSystemIsMounted, because it shows up in the
mount list without the trailing slash.
Sanitize the source dir as well.
https://bugzilla.redhat.com/show_bug.cgi?id=1723247
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The function modifies the context but did not care to restore it back.
If a <seclabel> was used on a disk, the <privateData> would not be
parsed.
Use VIR_XPATH_NODE_AUTORESTORE and add a test case to validate that
everything works.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 9c9620af called x86DataAdd without checking for an error,
so add the error checking.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 56b254dcc called virCPUx86DataAdd, but returned -1 directly
without calling the virCPUx86DataFree.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Trivial change. Adding the name of the device that has an
unknown PCI header type in that function helps when debugging
PCI code.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit 7bf679ae removed the @json argument from the qemuMonitorOpen
prototype; however, it did not update the ATTRIBUTE_NONNULL value
which causes a build failure for when checking is enabled such as
when lv_cv_static_analysis is enabled.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In the virStorageSourceChainHasManagedPR() function we iterate
over whole backing chain trying to determine if one of the layers
has managed PR configured. But due to a typo we in fact check the
top layer only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The files for libvirt-net-rpc-server.la refernce the sasl/sasl.h
system header but never used the $(SASL_CFLAGS) variable. This
was never noticed previously because the $(AVAHI_CLFAGS) were
set and these typically pulled in the same include directory.
When mDNS/Avahi support was removed this exposed the bug which
caused FreeBSD builds to break as /usr/local/include was no
longer searched for headers.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Filter out the given capabilities and set domain taint if we've done so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when e.g. a new feature breaks upstream behaviour it's useful
to allow users to disable the new feature to verify the regression and
possibly use it as a workaround until a fix is available.
The new qemu.conf option named "capability_filters" allows to remove
qemu capabilities from the detected bitmap.
This patch introduces the configuration infrastructure to parse the
option and pass it around.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Show that the capability tweaking stuff works by enabling blockdev in
the 'qemu-ns' test even in versions where it's not yet fully supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the DO_TEST_CAPS_LATEST/VER infrastructure to run a more modern
version of this and also fork it to a pre-blockdev version so that we
can check the qemu namespace capability tweaking.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For testing purposes it's sometimes desired to be able to control the
presence of capabilities of qemu. This adds the possibility to do this
via the qemu namespace.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly how we allow adding arbitrary command line arguments and
environment variables this patch introduces the ability to control
libvirt's perception of the qemu process by tweaking the capability bits
for testing purposes.
The idea is to allow developers and users either test a new feature by
enabling it early or disabling it to see whether it introduced
regressions.
This feature is not meant for production use though, so users should
handle it with care.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will allow enabling/disabling custom hypervisor
features for debugging/testing purposes via the qemu namespace.
Add a taint flag where we will flag such a domain so it's obvious what's
happening.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simplify the main function by splitting out how we parse the extra
passthrough environment variables.
Note that the validation function checks that the first letter must be a
character or underscore which makes the check whether the name is
redundant.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simplify the main function by splitting out how we parse the extra
passthrough commandline arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu_conf.c deals with the configuration file. Better fit for the
structure and freeing function will be qemu_domain.c where the rest of
the namespace parsing/formatting stuff resides.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The data injected via the namespace may contain also other things than
commandline passthrough definitions. Rename it to make it more
universal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In kernel 4.12 there was introduced new BFQ scheduler and in kernel
5.0 the old CFQ scheduler was removed. This has an implication on
the cgroups file names.
If the CFQ controller is enabled we use one file:
io.weight
The new BFQ controller expose one file with different name:
io.bfq.weight
Except for different name they have different syntax.
io.weight:
default $val
major:minor $val
io.bfq.weight:
$val
The difference is that BFQ doesn't support per-device weight.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In kernel 4.12 there was introduced new BFQ scheduler and in kernel
5.0 the old CFQ scheduler was removed. This has an implication on
the cgroups file names.
If the CFQ controller is enabled we use these two files:
blkio.weight
blkio.weight_device
The new BFQ controller expose only one file with different name:
blkio.bfq.weight
The reason is that BFQ controller doesn't support per-device weight.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we need to get a path of specific file and we need to check its
existence before we use it then we can reuse that path to get value
for specific device. This way we will not build the path again in
virCgroupGetValueForBlkDev.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we need to get a path of specific file and we need to check its
existence before we use it then we can reuse that path to get/set
values instead of calling the existing get/set value functions which
would be building the path again.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The header for the news entry blends together with the text and other
entries. This patch tries to space them out somewhat for better visual
separation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We currently refuse to connect to remote libvirtd over SSH if we see the
path ends in /session. Earlier on though we checked for /session and set
the VIR_DRV_OPEN_REMOTE_USER flag. There is one subtle distinction
though with the test driver. All test URIs are marked with this flag,
regardless of whether the URI indicates a local or remote connection.
Previously a local connection to the test driver would have used the
unprivileged libvirtd while a remote connection would have tried the
privileged libvirtd. With this we are consistent and use the
unprivileged for both local & remote, if the current user is non-root.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the VIR_DRV_OPEN_REMOTE_USER flag is only set when we identify
that we're connecting to a local libvirtd daemon. We would like to be
able to set that even if connecting to a remote libvirtd daemon. This
entails refactoring the conditional check.
One subtle change is that the VIR_DRV_OPEN_REMOTE_USER is now set when
the test+XXX:// URI is used, even if a servername is present. This has
no effect in this patch, but will later.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Libvirtd has long had integration with avahi for advertising libvirtd
using mDNS when TCP/TLS listening is enabled. For a long time the
virt-manager application had support for auto-detecting libvirtds
on the local network using mDNS, but this was removed last year
commit fc8f8d5d7e3ba80a0771df19cf20e84a05ed2422
Author: Cole Robinson <crobinso@redhat.com>
Date: Sat Oct 6 20:55:31 2018 -0400
connect: Drop avahi support
Libvirtd can advertise itself over avahi. The feature is disabled by
default though and in practice I hear of no one actually using it
and frankly I don't think it's all that useful
The 'Open Connection' wizard has a disproportionate amount of code
devoted to this feature, but I don't think it's useful or worth
maintaining, so let's drop it
I've never heard of any other applications having support for using
mDNS to detect libvirtd instances. Though it is theoretically possible
something exists out there, it is clearly going to be a niche use case
in the virt ecosystem as a whole.
By removing avahi integration we can cut down the dependency chain for
the basic libvirtd install and reduce our code maint burden.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The unprivileged libvirtd daemon switched to use the XDG dir layout in
the 0.9.13 release, and included code for moving config files from the
old location. The chances of someone upgrading libvirt from <= 0.9.12
directly to libvirt >= 5.5.0 is close enough to zero that we can
reasonably drop the back compat code.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Jano probably based his branch on top of mine and didn't notice
when I moved the section up slightly and thus git applied it again.
Keep only the instance followin the new features section.
This reverts commit 9c68bb4a5c.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
testDomainInterfaceAddresses always returns the same hard-coded
addresses. Change the behavior such as if there is a DHCP range defined,
addresses are returned from that pool.
The specific address returned depends on both the domain id and the
specific guest interface in an attempt to return unique addresses *most
of the time*.
Additionally, properly handle IPv6 networks which were previously
ignored completely.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When connecting to virtlogd fails e.g. due to wrong libvirtd selinux
process label we'd report an utterly useless error message:
$ virsh start upstream
error: Failed to start domain upstream
error: Cannot recv data: Connection reset by peer
Use virLastErrorPrefixMessage in the correct place to give a better
sense of what's going on:
$ virsh start upstream
error: Failed to start domain upstream
error: can't connect to virtlogd: Cannot recv data: Connection reset by peer
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
In some cases we report a low level error message which does not have
enough information to see what the problem is. To allow improving on
this add an API which will prefix the error message with another error
message string which can be used to describe where the error comes from.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we added the seclabels to the schema we can test that they are
parsed and formatted correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Allow using seclabels the same way as disk images allow it. Currently
the snapshot code copies the seclabels from the original image if no
seclabel is provided. Also there's no code change required as the
snapshot XML parser actually uses parts of the disk parser thus
seclabels are already parsed and formatted and even applied thus this is
just a formalization of our support for this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Change the example and add a recommendation to use disk target rather
than path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When testing stuff you might want to print the XML. Interlocking it with
no metadata adds exactly 0 value to the user.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit f34397e51c introduced a crash-inducing problem when collecting
disk snapshot data, where the array would be filled starting from the
second element.
The code then dereferenced the first one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The "cpu-add" command is supported in all supported qemu versions and
cpu unplug did not work at all until the new cpu unplug approach (using
device_add/del) was implemented.
Remove the support for falling back to the text monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The docstring of virNetworkGetDHCPLeases is not correctly formatted and
as a result the example code snippet appears as normal text under the
"Returns:" section. This patch fixes the problem.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
It will not be executed when the page is loaded locally. It needs
planet.virt-tools.org to supply the right headers (which it does now).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Don't use the global namespace, unify quotes and semicolons at the end of lines
and "use strict".
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
With QEMU versions which lack "unavailable-features" we use CPUID based
detection of features which were enabled or disabled once QEMU starts.
Thus using MSR features with host-model would result in all of them
being marked as disabled in the active domain definition even though
QEMU did not actually disable them.
Let's make sure we add MSR features to host-model only when
"unavailable-features" property is supported by QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Without "unavailable-features" CPU property we cannot properly detect
whether a specific MSR feature we asked for (either explicitly or
implicitly via a CPU model) was disabled by QEMU for some reason.
Because this could break migration, snapshots, and save/restore
operaions, it's better to just forbid any use of MSR features with QEMU
which lacks "unavailable-features" CPU property.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is used by the host capabilities code to construct host CPU
definition.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This functions may be used as a virCPUDefFeatureFilter callbacks for
virCPUDefCheckFeatures, virCPUDefFilerFeatures, and similar functions to
select (virCPUx86FeatureFilterSelectMSR) or drop
(virCPUx86FeatureFilterDropMSR) features reported via MSR.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Until now, this was a macro usable for direct initialization when a
variable is defined. Turning the macro into a function makes it more
general.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This API can be used to check whether a CPU definition contains features
matching a given filter.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These APIs can be used to execute arbitrary emulators.
Forbid them on read-only connections.
Fixes: CVE-2019-10168
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This API can be used to execute arbitrary emulators.
Forbid it on read-only connections.
Fixes: CVE-2019-10167
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The virDomainManagedSaveDefineXML can be used to alter the domain's
config used for managedsave or even execute arbitrary emulator binaries.
Forbid it on read-only connections.
Fixes: CVE-2019-10166
Reported-by: Matthias Gerstner <mgerstner@suse.de>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The virDomainSaveImageGetXMLDesc API is taking a path parameter,
which can point to any path on the system. This file will then be
read and parsed by libvirtd running with root privileges.
Forbid it on read-only connections.
Fixes: CVE-2019-10161
Reported-by: Matthias Gerstner <mgerstner@suse.de>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use 'rc' to temporarily store the subfunction return values,
instead of ret.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
In preparation to removing the json field from qemuMonitor,
stop checking for it in QEMU_CHECK_MONITOR.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Always assume JSON monitor was requested, since all the callers
pass true anyway.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Now that we no longer support the HMP monitor, remove some dead code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
No reason not to be consistent with the user-visible value.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Using 8 hex digits all the time, regardless of whether the
actual value can fit in fewer, makes it more obvious to the
user what the limits are.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This test case shows that we now reject invalid spapr-vio
addresses.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a switch() statement and prepare for validating
more address types than just PCI.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
According to sPAPR, addresses are 32-bit (8 hex digits) rather
than 64-bit (16 hex digits). Update the schema accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that the virDomainQemuAttach API returns an error, we can remove the
unused qemuProcessAttach function as well, deleting the only user
that possibly could have requested to open a non-JSON monitor.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The example is very outdated and we dropped the support for it anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow marking of the deprecation of features similarly how we mark
introduction of features.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current version will definitely not provide such a neat commandline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Explicitly state that the conversion nowadays produces results which
aren't really usable manually as it requires all the stuff which is
usually prepared by libvirtd.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only user is now in qemu_monitor_json.c to re-parse the command line
format into keyvalue pairs for use in QMP command construction.
Move and rename the functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
qemu_domain.c is now the only place that uses it, so we can move it from
qemu_parse_command.h
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Now that we no longer use that functionality we can also drop the tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This code is really neglected and does not at all work reliably. It
can't even be used for converting our own commandline back.
Since this was mostly useful for aiding migration from manually run qemu
to libvirt and will not work for this puspose in many cases it's not
worth having.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Now that we no longer support attaching to a live QEMU process not
managed by libvirt we can drop the backend functions as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Attaching to modern qemu will not work with all this code and attempting
to ressurect it would be mostly pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Allow expressing that a hypervisor implementation was deleted by adding
a end-version when the implementation was removed to our hypervisor
support matrix.
This patch hacks the perl script that generates the support matrix to
support comments like:
.domainQemuAttach = qemuDomainQemuAttach, /* 0.8.3 (deprecated: 5.5.0) */
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Now that we no longer support testing HMP monitor,
the json field is pointless.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We return success when running this function for either non-JSON monitor
testing or guest agent testing.
However we no longer test HMP monitor and we do not try to validate
the guest agent interaction.
Drop the test->json check and report a proper error if someone tries
to run this function for the guest agent without properly wiring it up.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The QMP monitor only uses a newline to separate lines,
while HMP and the guest agent also use a carriage return.
In preparation to dropping support for testing HMP interaction,
only skip the carriage return if we're dealing with the guest agent,
removing the need to check the 'json' field.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There are couple of functions which get shorter after the
treatment.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Couple of things happening in this patch:
1) We can mark the device we're adding onto active list as used
way before - when adding it onto temporary list.
2) When actually moving device from a temporary helper list onto
the list of active devices we check if the device isn't
already there. The same check is performed by
virSCSIVHostDeviceListAdd() later. Drop this duplicity.
3) The 'error' label is renamed to 'rollback' to reflect what it
is actually doing. While in the rest of the code we don't
allow random label names, this source file is different.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When looking up a USB device by vendor the
virUSBDeviceFindByVendor() is used. The function returns number
of items found. But the logic in caller to process it is
needlessly complicated.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are couple of functions which get shorter after the
treatment.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need to translate virDomainHostdevDef-s into
virPCIDevice-s with locked list of PCI devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need to translate virDomainHostdevDef-s into
virPCIDevice-s with locked list of PCI devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function is a good candidate for VIR_AUTOPTR() conversion.
But this conversion will be easier if we only add @pci device
onto @pcidevs list after it was all set up.
This is no functional change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If spawning qemu fails then we report an error and proceed to
writing status XML onto the disk. This is unnecessary as we are
sure that the domain is not running.
At the same time, if virPidFileReadPath() fails it returns
-errno. Use it in the error message. It may explain what went
wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We support pcie-to-pci-bridge, and prefer it to
dmi-to-pci-bridge, since libvirt 4.3.0, but we didn't
update all the documentation accordingly at the time.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting from version 4.1 qemu allows reporting 'features' for a given
QAPI type object. This allows reporting support of fixes and additions
which are otherwise invisible in the QAPI schema.
Implement a possibility to query 'features' in the QAPI query strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Update the capabilities from a non-upstream version (9c70209b63 is not
in qemu.git) to qemu upstream commit 33d6099906 (2019/06/18) so that we
get the QMP schema 'features' field support and are able to detect that
the 'file' block backend supports dynamic auto-read-only.
Note that I've rebuilt this on a machine with a more modern kernel and
microcode which exposes e.g. the recent CPU bug mitigations, thus I
opted to keep the CPU changes rather than trying to do a franken-caps
by updating only the output of query-qmp-schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Internal headers should use #pragma once instead of the standard #ifndef
guard. Public headers still require the existing header guard.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When updating guest CPU definition according to the vCPU actually
created by QEMU, we want to use the generic qemuMonitorGetGuestCPU to
get both CPUID and MSR features.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unlike the old version (which is now called qemuMonitorGetGuestCPUx86),
this monitor API checks for individual features by their names rather
than processing CPUID bits. Thus we can get the list of enabled and
disabled features for both CPUID and MSR features.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function converts a list of QOM properties into a NULL-terminated
array of property names. The new type parameter may be used to limit the
result to properties of a specific type.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a generic replacement for the former virCPUx86DataAddFeature,
which worked on the generic virCPUDataPtr anyway.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It was never implemented or used for anything else anyway. Mainly
because it uses CPUID features bits. The function is renamed as
qemuMonitorGetGuestCPUx86 to make this explicit.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We used type=full expansion on the result of previous type=static
expansion to get all possible spellings of CPU features. Since we can
now translate the QEMU's canonical names to our names, we can drop this
magic and do only type=static CPU model expansion.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By default query-cpu-model-expansion only reports canonical names of all
CPU features. We do some magic and call the command twice to get all
possible spellings of the features, but being able to consume canonical
names will allow us to drop this magic.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When building QEMU command line, we should use the preferred spelling of
each CPU feature without relying on compatibility aliases (which may be
removed at some point).
The "unavailable-features" CPU property is used as a witness for the
correct names of the features in our translation table.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way we call query-cpu-model-expansion will rely on some capabilities
bits. Let's make sure all capabilities are set before probing host CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is similar to "filtered-features" property, which reports CPUID bits
corresponding to disabled features, but more general. The
"unavailable-features" property supports both CPUID and MSR features by
listing their names.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will use it to check whether QEMU supports a specific CPU property.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far we always used libvirt's name of each CPU feature relying on
backward compatible aliases in QEMU. The new translation table can be
used whenever QEMU mandates or prefers canonical feature names.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This should cover all CPU features for which QEMU prefers spelling that
differs from the one used by libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Newer QEMU will translate the feature names to their canonical names so
4.0.0 is the last one which produces the results we currently have in
*-latest.args.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Normal CPU features use modern -cpu ...,feature=on|off syntax when
available, but kvm features kept using the old +feature or -feature.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These test check all kvm CPU features that could be passed to the -cpu
option by libvirt.
The 2.7.0 version is the last one for which we use +|-feature syntax for
CPU features, while feature=on|off is used with newer versions. This
is visible in the following patch which changes only the *-latest.args
files.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Properly filter features which should not be passed to QEMU because they
were never supported by QEMU or they did nothing and QEMU dropped them.
Currently they are just silently ignored by the command line generator.
Let's make this process more visible and clean by dropping the features
from the domain's active definition in qemuProcessUpdateGuestCPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new internal API can be used for in place filtering of CPU features
in virCPUDef.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We already have virQEMUCapsCPUFilterFeatures for filtering features
which QEMU does not know about. Let's move osxsave and ospke from
qemuFeatureNoEffect there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Only succeed when @pid_value is 1, since according to the docs this is
the minimum requirement for any driver to implement this API.
Since this is test driver, we assume that any signal from the supported
list can be sent to pid 1 and we therefore succeed every time.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The libvirtd.conf file has a comment pointing people to format.html
which has nothing todo with the configuration file format.
It also has a comment about tests/daemon-conf which no longer exists,
and even if it did exist such comment is not relevant to end users
when this file is installed in /etc/.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit a3ab6d42 changed the libvirtd profile to a named profile
but neglected to accommodate the change in the qemu profile
ptrace and signal rules.
Later on 4ec3cf9a fixed that for ptrace and signal but openGraphicsFD
is still missing.
As a result, libvirtd is unable to open UI on libvirt >=5.1 e.g. with
virt-manager.
Add openGraphicsFD rule that references the libvirtd profile
by name in addition to full binary path.
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1833040
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Normal practice is to provide a Ref API for all objects, but this was
forgotten for the virNetworkPortPtr object.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use auto free to avoid leaking the "trustGuestRxFilters" strings
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Hosts for rbd are ceph monitor daemons. These have fixed IP addresses,
so they are often referenced by IP rather than hostname for
convenience, or to avoid relying on DNS. Using IPv4 addresses as the
host name works already, but IPv6 addresses require rbd-specific
escaping because the colon is used as an option separator in the
string passed to librados.
Escape these colons, and enclose the IPv6 address in square brackets
so it is distinguished from the port, which is currently mandatory.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
It's fairly easy (especially for new contributors) to not spot
the 'cppi not installed' line in the syntax-check output. Add a
banner that is shown at the end of syntax-check output if no cppi
was found.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Andrea Bolognani <abologna@redhat.com>
Change the domain conf so invoke the new network port public APIs instead
of the network callbacks.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The portid will be the UUID of the virNetworkPort object associated
with the network interface when a guest is running.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The various steps involved in reconnecting to a domain may cause updates
to the virDomainObj struct that need to be reflected in the saved status
file.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When starting up it is important to notify the network driver of any
NICs which are used by running guests so that it can account for any
resources they are using.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This initial implementation just wires up the APIs and does tracking of
the port XML definitions. It is not yet integrated into the resource
allocation logic.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNetworkObjPtr state will need to maintain a record of all
virNetworkPortDefPtr objects associated with the network. Record these
in a hash and add APIs for manipulating them.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Define the wire protocol for the virNetworkPort APIs and enable the
client/server RPC dispatch.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a new virNetworPort object that will present an attachment to
a virtual network from a VM.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port bandwidth update code from the domain driver
network callback implementation.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port deletion code from the domain driver network
callback implementation.
Reivewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port notification code from the domain driver network
callback implementation.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port allocation code from the domain driver network
callback implementation.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current qemu driver code for changing bandwidth on a NIC first asks
the network driver if the change is supported, then changes the
bandwidth on the VIF, and then tells the network driver to update the
bandwidth on the bridge.
This is potentially racing if a parallel API call causes the network
driver to allocate bandwidth on the bridge between the check and the
update phases.
Change the code to just try to apply the network bridge update
immediately and rollback at the end if something failed.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When (un)plugging an interface into a network, the 'plugged'
and 'unplugged' operations are invoked in the hook script.
The data provided to the script contains the network XML, the
domain XML and the domain interface XML. When we strictly split the
drivers up this will no longer be possible and thus breakage is
unavoidable. The hook scripts are not considered to be covered by the
API guarantee so this is OK.
To avoid existing scripts taking the wrong action, the existing
operations are changed to 'port-created' and 'port-deleted'
instead. These will receive the network XML and the network port
XML.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the virDomainNetDef object into a virNetworkPortDef object
at the start of networkReleaseActualDevice. This largely decouples
the method impl from the domain object type.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the virDomainNetDef object into a virNetworkPortDef object
at the start of networkNotifyActualDevice. This largely decouples
the method impl from the domain object type.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the virDomainNetDef object into a virNetworkPortDef object
at the start of networkAllocateActualDevice. This largely decouples
the method impl from the domain object type.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Helper APIs are needed to
- Populate basic virNetworkPortDef from virDomainNetDef
- Set a virDomainActualNetDef from virNetworkPortDef
- Populate a full virNetworkPortDef from virDomainActualNetDef
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Stop passing a virDomainNetDefPtr parameter to networkLogAllocation,
instead just pass in the MAC address. The actual device type is also not
required, since virNetworkForwardIfDefPtr has a type field that can be
used instead.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a virNetworkPortDefPtr struct to represent the data associated
with a virtual network port. Add APIs for parsing/formatting XML docs
with the data.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The domain conf actual network def stores a <class id='3'/> element
separately from the <bandwidth>. The class ID should really just be
an attribute on the <bandwidth> element. We can't change existing
XML, and this isn't visible to users since it is internal XML only.
When we expose the new network port XML to users though, we should
get the design right.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There was a space missing after 'qcow'.
Delete 'qcow' and 'cow' as examples to make the document
more relevant for the current decade.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
There is no obvious benefit in putting the escaped message
back into msg while tmp holds the original message.
Remove the assignment and use 'tmp' directly'.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that all the callers call qemuMonitorTestNew with json=true,
remove the argument and always assume JSON.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The only user of the qemuMonitorTestNewSimple macro is using JSON.
Always pass 'true' to qemuMonitorTestNew and remove the 'json'
argument.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When libvirtd is run inside a container it is normal that neither
systemd nor pm-utils will be available. In this case there is no way to
suspend the host, so libvirt should just report the feature unsupported
instead of raising an error.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If libvirt receives DISCONNECTED event and prDaemonRunning is set
to false, and qemuDomainRemoveDiskDevice() is performing in the
meantime, then qemuDomainRemoveDiskDevice() will fail to remove
pr-helper object because prDaemonRunning is false. But removing
that check from qemuHotplugRemoveManagedPR() is not enough,
because after removing the object through monitor the
qemuProcessKillManagedPRDaemon() is called which contains the
same check. Thus the pr-helper process might be left behind.
Signed-off-by: Jie Wang <wangjie88@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Log the flags passed to the function in a exploded state so that it's
easily visible what's happening to the image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
At this point, all test programs that use qemu_LDADDS also
use LDADDS, so we can remove a bunch of repetition by simply
including the latter in the former.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
We optionally include QEMU and LXC support in this test and
depending on which is enabled (if either is enabled at all) we
need to link in different objects.
Right now we implicitly depend on the fact that qemu_LDADDS is
empty when QEMU is not enabled to get the correct set of objects,
but it's better to be explicit about it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
We want all test programs using qemu_LDADDS to also use LDADDS,
and cputest is the only existing exception.
We can't just replace GNULIB_LIBS with LDADDS though, even though
the latter is a superset of the former, because that would result
in a linking error due to including the same object twice:
/usr/bin/ld:
../src/libvirt_probes.o:.../src/libvirt_probes.o.dtrace-temp.c:141:
multiple definition of `libvirt_object_new_semaphore';
../src/libvirt_probes.o:.../src/libvirt_probes.o.dtrace-temp.c:141:
first defined here
To work around this, we include both qemu_LDADDS and LDADDS when
QEMU support is enabled, and just LDADDS otherwise.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Since the behaviour of launch security is heavily dependent on 3rd party
vendors (e.g. AMD SEV) where the data returned can be essentially
anything, the most reasonable approach here in the test driver is not to
try return any data.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The hash table returned by qemuMonitorGetAllBlockJobInfo is organized by
the frontend name (which skipps the 'drive-' prefix). While our code
properly matches the jobs to the disk, qemu needs the full job name
including the 'drive-' prefix to be able to identify jobs.
Fix this by adding an argument to qemuMonitorGetAllBlockJobInfo which
does not modify the job name before filling the hash.
This fixes a regression where users would not be able to cancel/pivot
block jobs after restarting libvirtd while a blockjob is running.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 76b9aba2ba I refactored how the function treats the readonly
flag which introduced a bug when we'd not allow to force read-write
state for an image.
This created problems with blockjobs where we need to temporarily
force images to have read-write permissions.
Rename QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_READ_ONLY to
QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_FORCE_READ_ONLY and also introduce
a complement QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_FORCE_READ_WRITE which
will allow to force write access.
https://bugzilla.redhat.com/show_bug.cgi?id=1717768
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 76b9aba2ba I tried to refactor qemuDomainStorageSourceAccessAllow
but used wrong operators for adding bitwise flags.
This way the flags would result in 0 if any of them would be applied.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When specifying extra params for spcie TLS verification, it's necessary
to pass a weird URI to it. Let's add a test for this case where the TLS
string contains a space.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Determine whether the test has failed after running all the cases so
that we don't need to rerun it multiple times to see all problems.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use VIR_TEST_VERBOSE instead. This fixes the following syntax check
problem:
tests/qemumonitorjsontest.c:1409: virReportError(VIR_ERR_INTERNAL_ERROR, "arr should have been cleared");
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Updates the existing image stored in @path, in case @dxml contains valid
XML supported by the fake host.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Extracting the code logic for opening and parsing a test image from
testDomainRestoreFlags into a separate function, allows us to reuse this
code in other functions such as testDomainSaveImageGetXMLDesc.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Extracting the code logic for writing a test image to disk from
testDomainSaveFlags into a separate function, allows us to reuse this
code in other functions such as testDomainSaveImageDefineXML.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The upcoming virDomainBackup() API needs to take advantage of the
ability to expose a bitmap as part of nbd-server-add for a pull-mode
backup (this is the recently-added QEMU_CAPS_NBD_BITMAP capability).
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The upcoming virDomainBackup() API needs to take advantage of various
qcow2 bitmap manipulations as the basis to virDomainCheckpoints and
incremental backups. Add four functions to expose
block-dirty-bitmap-{add,enable,disable,merge} (this is the
recently-added QEMU_CAPS_BITMAP_MERGE capability).
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Add two capabilities for testing features required for the upcoming
virDomainBackupBegin: use block-dirty-bitmap-merge as the generic
witness of bitmap support needed for checkpoints (since all of the
bitmap management functionalities were finalized in the same qemu 4.0
release), and the bitmap parameter to nbd-server-add for pull-mode
backup support. Even though both capabilities are likely to be
present or absent together (that is, it is unlikely to encounter a
qemu that backports only one of the two), it still makes sense to keep
two capabilities as the two uses are orthogonal (full backups don't
require checkpoints, push mode backups don't require NBD bitmap
support, and checkpoints can be used for more than just incremental
backups).
Existing code is not affected by the new capabilities.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Migration always uses a TCP socket for NBD servers, because we don't
support same-host migration. But upcoming pull-mode incremental backup
needs to also support a Unix socket, for retrieving the backup from
the same host. Support this by plumbing virStorageNetHostDef through
the monitor calls, since that is a nice reusable struct that can track
both TCP and Unix sockets.
Update qemumonitorjsontest to verify both forms of the QMP command.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Time to remove the cleanup labels rendered useless in the previous
patch. There are still plenty of other tests that could be further
simplified, but I've already spent enough time in this file for now.
Signed-off-by: Eric Blake <eblake@redhat.com>
The DO_TEST() macro in qemumonitorjsontest.c was not passing the
schema through, which meant that we were not validating any of those
tests for correct usage according to the schema.
In the process of mechanically altering tests to pass the schema
through, use VIR_AUTOPTR on all of the affected test instances. The
next patch will do some further cleanups that it exposes.
Tested by using this hack, where the test mistakenly passed pre-patch,
but correctly diagnosed the garbage post-patch:
| diff --git i/src/qemu/qemu_monitor_json.c w/src/qemu/qemu_monitor_json.c
| index 53a7de8b77..86d8450814 100644
| --- i/src/qemu/qemu_monitor_json.c
| +++ w/src/qemu/qemu_monitor_json.c
| @@ -1532,7 +1532,8 @@ qemuMonitorJSONGetStatus(qemuMonitorPtr mon,
| if (reason)
| *reason = VIR_DOMAIN_PAUSED_UNKNOWN;
|
| - if (!(cmd = qemuMonitorJSONMakeCommand("query-status", NULL)))
| + if (!(cmd = qemuMonitorJSONMakeCommand("query-status",
| + "s:garbage", "foo", NULL)))
| return -1;
|
| if (qemuMonitorJSONCommand(mon, cmd, &reply) < 0)
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Simplify the GEN_TEST_FUNC() and target of the DO_TEST_SIMPLE() macros
by using autoptr support.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Upcoming tests are going to use VIR_AUTOPTR to simplify test cleanup.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Now that we never get to the actual snapshot code if there's nothing to
do we can remove the variable and surrounding logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Skip actual snapshot creation code if we have 0 disks to snapshot.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All cases taking the 'cleanup' path can take the original 'error' path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce 'rc' for collecting state from monitor commands so that we can
initialize 'ret' to -1. This also fixes few cases which could return 0
from the function despite an error condition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainSnapshotDiskDataFree also removes the resources associated
with the disk data. Move the unlinking of the just-created file so that
we can unify the cleanup paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit cbb4d229de I named the function with 'free' suffix, but at
that time it already did some non-freeing tasks. Rename it to make it
obvious that it's not just memory managemet.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function skips disks which are not selected for snapshot. Rather
than creating a sparse array and check whether the given field is filled
compress the entries.
Note that this does not allocate a smaller array, but the memory
allocation is short-lived.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If there's an offline config definition save it unconditionally even if
it was not modified.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The error path is unlikely thus saving the status XML even if we didn't
modify it does not add much burden.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After getting rid of pre-transaction qemu support the cleanup section is
unused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass in the schema since it works with the 'file' test now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Pass in the schema data from the caller if QMP schema testing is
desired.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In case when we are testing a QMP command we can try to schema check it
so that we catch inconsistencies.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This configuration can be used by gitdm to generate reports about
libvirt development.
The goal I was working with was being able to generate a report
for every single libvirt release and having zero "email address
as company" entries; picking different commit ranges might result
in some contributions not being accounted for.
I had to make some judgement calls when the situation was not
entirely clear-cut: when in doubt, and not finding any obvious
signs of the opposite being true, I mostly ended up dumping
people in the "unaffiliated contributions" bin. If I got it
wrong, and companies want to get recognition for their sponsored
contributions to libvirt, they can send patches.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fabiano Fidencio was working for Red Hat when he contributed to
libvirt, Shi Lei's non-company email address contains the company
name so it's fair to assume contributions using it were made on
company time, and Adrian Brzezinski's personal email was used
for the S-o-b while the git authorship information clearly pointed
at the company being involved.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Validate @keycodes before successfully returning. Since this is test
driver, @holdtime is being unused here.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 2f2254c7f4 attempted to fix a memory leak by ensuring
cpumapToSet is always a freshly allocated bitmap, but regrettably
introduced a NULL pointer access while doing so, because it called
virBitmapCopy() without allocating the destination bitmap first.
Solve the issue by using virBitmapNewCopy() instead.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The flag causes undefine to fail if trying to remove a non-RBD disk. Add
a warning about that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
The old flag name confused some users into thinking it's the correct way
to undefine a VM with libvirt (not storage volume) snapshots.
The correct flag in that case is way less obvious: --snapshots-metadata.
Rename the flag (by adding an alias) to something which will promote
looking up the actual purpose of the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Reword the end of the help string to make it more obvious that the VM
must be inactive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Due to this bug the following command would fail on any host where TSC
frequency can be probed:
$ virsh capabilities | virsh cpu-baseline /dev/stdin
error: unsupported configuration: Invalid TSC frequency
https://bugzilla.redhat.com/show_bug.cgi?id=1641702
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's a premature optimization. It's perfectly acceptable for
'error' label to deal with @vm == NULL case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
We're using VIR_AUTOPTR() for everything now, plus the
cleanup section was not doing anything useful anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In two out of three scenarios we are cleaning up properly after
ourselves, but commit 5f2212c062 has changed the remaining one
in a way that caused it to start leaking cpumapToSet.
Refactor the logic so that cpumapToSet is always a freshly
allocated bitmap that gets cleaned up automatically thanks to
VIR_AUTOPTR(); this also allows us to remove the hostcpumap
variable.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Right now, if numad fails, we raise an error but return an
empty string to the caller instead of a NULL pointer, which
means processing will continue and the user will see
# virsh start guest
error: Failed to start domain guest
error: invalid argument: Failed to parse bitmap ''
instead of a more reasonable
# virsh start guest
error: Failed to start domain guest
error: operation failed: Failed to query numad for the advisory nodeset
Make sure the user gets a better error message.
https://bugzilla.redhat.com/show_bug.cgi?id=1716387
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ever since the feature was introduced with commit 0f8e7ae33a,
it has contained a logic error in that it attempted to use a NUMA
node map where a CPU map was expected.
Because of that, guests using <numatune> might fail to start:
# virsh start guest
error: Failed to start domain guest
error: cannot set CPU affinity on process 40055: Invalid argument
This was particularly easy to trigger on POWER 8 machines, where
secondary threads always show up as offline in the host: having
<numatune>
<memory mode='strict' placement='static' nodeset='1'/>
</numatune>
in the guest configuration, for example, would result in libvirt
trying to set the process affinity so that it would prefer
running on CPU 1, but since that's a secondary thread and thus
shows up as offline, the operation would fail, and so would
starting the guest.
Use the newly introduced virNumaNodesetToCPUset() to convert the
NUMA node map to a CPU map, which in the example above would be
48,56,64,72,80,88 - a valid input for virProcessSetAffinity().
https://bugzilla.redhat.com/show_bug.cgi?id=1703661
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This helper converts a set of NUMA node to the set of CPUs
they contain.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This argument wasn't validated anywhere, neither in the generic
implementation nor in the individual drivers. As a result a call to this
function with a large enough codeset value prior to this change causes
libvirtd to crash.
This happens because all drivers call virKeycodeValueTranslate which
uses codeset as an index to the virKeymapValues array, causing an
out-of-bounds error.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When migrating a domain with invtsc CPU feature enabled, the TSC
frequency of the destination host must match the frequency used when the
domain was started on the source host or the destination host has to
support TSC scaling.
If the frequencies do not match and the destination host does not
support TSC scaling, QEMU will fail to set the right TSC frequency when
starting vCPUs on the destination and thus migration will fail. However,
this is quite late since both host might have spent significant time
transferring memory and perhaps even storage data.
By adding the check to libvirt we can let migration fail before any data
starts to be sent over. If for some reason libvirt is unable to detect
the host's TSC frequency or scaling support, we'll just let QEMU try and
the migration will either succeed or fail later.
Luckily, we mandate TSC frequency to be explicitly set in the domain XML
to even allow migration of domains with invtsc. We can just check
whether the requested frequency is compatible with the current host
before starting QEMU.
https://bugzilla.redhat.com/show_bug.cgi?id=1641702
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When the host CPU supports invariant TSC the host CPU definition created
by virCPUx86GetHost will contain (unless probing fails for some reason)
addition TSC related data.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit 0a97486e09 moved them outside #ifdef, but after virCPUx86GetHost,
which will start calling them in the following patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch adds a new
<counter name='tsc' frequency='N' scaling='on|off'/>
element into the host CPU capabilities XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
On a KVM x86_64 host which supports invariant TSC this function can be
used to detect the TSC frequency and the availability of TSC scaling.
The magic MSR numbers required to check if VMX scaling is supported on
the host are documented in Volume 3 of the Intel® 64 and IA-32
Architectures Software Developer’s Manual.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The qemuTestParseCapabilitiesArch call would eventually lead to the host
CPU being probed via virCPUGetHost. Let's divert this to a mocked
version already used by the qemuxml2argvtest.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The function is renamed as virQEMUCapsProbeHostCPU and it does not get
the list of allowed CPU models from qemuCaps anymore. This is
responsibility is moved to the caller. The result is just a very thin
wrapper around virCPUGetHost mostly required mocking in tests.
The generic function is used in place of a direct call to virCPUGetHost
in virQEMUCapsInitHostCPUModel to make sure tests don't accidentally
probe host CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There's nothing x86 specific about this function. Rename the
function so that it has DMI suffix which enables it to be reused
on different arches (as using X86 from say ARM would look
suspicious).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This test case uses (anonimized) data pulled from a
GIGABYTE R120-T34 server.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
We have a single mock dmidecode script right now, but we're
going to add another one soon, so we need to make sure its
name contains the test case name as a prefix, just like we
already do with all data files.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
All current IOMMU features are specific to Intel IOMMU, so
understandably we check for the corresponding capabilities
inside the Intel-specific switch() branch; however, we want
to make sure SMMUv3 IOMMU users get an error if they try to
enable any of those features in their guest, and performing
the capability checks unconditionally is both the easiest
way to achieve that, as well as the one least likely to
result in us inadvertently letting users enable some new
Intel-specific IOMMU feature for ARM guests later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
SMMUv3 is an IOMMU implementation for ARM virt guests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability can be used to figure out whether the
QEMU binary at hand supports the machine type property
we need in order to enable SMMUv3 IOMMU support.
Unfortunately we can't avoid probing the RISC-V binaries
along with the ARM ones, since both architectures have
their own 'virt' machine type.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Current capability checks are specific to Intel IOMMU, so
we need to move them inside the switch() statement before
we can introduce more virDomainIOMMUModel values.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This doesn't make a whole lot of difference now, but once
we introduce more virDomainIOMMUModel values the current
structure will no longer work.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ensure unexpected values are dealt with correctly, that
is by invoking virReportEnumRangeError() and immediately
returning a negative value to the caller.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All other examples are organized using the either the format/
or the format/category/ hierarchy already, and grouping all
C programs together removes the last remaining outliers.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Now that all C examples are neatly sorted into only three
categories, getting rid of our custom installation machinery
and replacing it with the standard autotools mechanism
finally becomes feasible.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Most C examples live in their own directory, which seems a
bit unnecessary especially considering that all virt-admin
related examples share a single admin/ directory. Reorganize
non-admin C examples in two categories: domain/ for those
that act on a domain, and misc/ for everything else.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
The virt-lxc-convert shell script is at this point the
only example we don't install on the target system.
Create a sh/ subdirectory, following the example set by
the existing polkit/, systemtap/ and xml/, and move the
script there; then add rules that will install all example
shell scripts as documentation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Right now we install the files in RPMs only, and we include
them in the -daemon package which is probably not the best
option either. Start installing them via autotools; the RPMs
will get them automatically in the -docs package.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
We're doing nothing more than copying files to a target
directory, so we don't need any custom shell commands and
can just use the standard autotools data installation
support instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
$(mkinstalldirs) works like 'mkdir -p' in that it will
create all the necessary parts of the path leading up to
the actual directory, which means creating $(examplesdir)
beforehand is not necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
$(AM_CPPFLAGS) is for passing options to the C preprocessor,
not the C compiler, and the stuff in $(WARN_CFLAGS) belongs
to the latter category.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
$(LDADD) is for object files that should be added during
linking, not for options that should be passed to the
linker: that's what $(AM_LDFLAGS) is for.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
The C programs in this directory are supposed to be only
using public functions, so having $(top_srcdir) in the
header search path is unnecessary at best and actively
harmful at worst.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
$(WARN_CFLAGS) contains options intended for the compiler,
whereas $(LDADD) is supposed to list additional objects
required during linking, so the former clearly doesn't
belong in the latter.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
$(AM_CPPFLAGS) already includes $(WARN_CFLAGS), so this is
not doing anything useful.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
We already install the file, along with its driver-specific
counterparts, into ${datadir}/libvirt/api/ where language
bindings will actually look for them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Libvirt includes a framework for ensuring mutual exclusion between
virtual machines using host resources. Typically this is used to prevent
two VM processes from having concurrent write access to the same disk
image, as this would result in data corruption if the guest was not
using a cluster aware filesystem.
Lock manager plugins
====================
The lock manager framework has a pluggable architecture, to allow
different locking technologies to be used.
nop
This is a "no op" implementation which does absolutely nothing. This
can be used if mutual exclusion between virtual machines is not
required, or if it is being solved at another level in the management
stack.
`lockd <locking-lockd.html>`__
This is the current preferred implementation shipped with libvirt. It
uses the ``virtlockd`` daemon to manage locks using the POSIX fcntl()
advisory locking capability. As such it requires a shared filesystem
of some kind be accessible to all hosts which share the same image
storage.
`sanlock <locking-sanlock.html>`__
This is an alternative implementation preferred by the oVirt project.
It uses a disk paxos algorithm for maintaining continuously renewed
leases. In the default setup it requires some shared filesystem, but
it is possible to use it in a manual mode where the management
application creates leases in SAN storage volumes.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
