IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
While sections are somewhat loosely defined and thus the choice
is not quite a clear-cut one, section 8 might be a slightly
better fit in this case.
Suggested-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a sentence to the active_pcr_banks node documentation that clarifies
that when the active_pcr_banks node is removed from the XML or when it
is omitted that the set of active PCR banks is not changed anymore.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2039246
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Commit f4aae9726d factored out the snapshot redefinition code into a
separate function, but didn't account for the fact that the code is
consuming the reference to the snapshot definition and by moving the
code away the caller (qemuSnapshotCreateXML) now frees the definition
which didn't happen before as we cleared the pointer.
Fix it by increasing the reference locally. Later patches will refactor
the code so that it's more obvious what's happening.
Fixes: f4aae9726d
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2039651
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'def' is commonly used to refer to domain definition. Most of the
snapshot code uses 'snapdef' for the snapshot definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our approach to snapshots without metadata was to insert them to the
snapshot list and then later remove them from the list when the flag is
present.
This quirky logic was broken in a recent refactor of the snapshot code
causing that the snapshot stayed inserted in the snapshot list.
Recent refactor of the snapshot code didn't faithfully relocate this
logic to the new function.
Rather than attempting to restore the quirky logic of adding and then
removing the object, don't add the snapshot into the list at all when
the user doesn't want metadata.
We achieve this by creating a temporary 'virDomainMomentObj' wrapper
which is not inserted into the list and using that instead of calling
virDomainSnapshotAssignDef.
Fixes: 9bad0fb809
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2039131
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Export 'virDomainMomentObjNew' and 'virDomainMomentObjFree' and define
the latter as autoptr cleanup function for 'virDomainMomentObj'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Format the function prototypes the same way as in the .c file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently virProcessGetStatInfo() always returns success and only logs error
when it is unable to parse the data. Make this function actually report the
error and return a negative value in this error scenario.
Fix the callers so that they do not override the error generated.
Also fix non-linux implementation of this function so as to report error.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Meson reports
WARNING: pkgconfig variable 'cflags' not defined for dependency yajl.
which makes sense, because "cflags" is not one of the variables
reported by
$ pkg-config --print-variables yajl
and
$ pkg-config --variable=cflags yajl
doesn't work either.
The breakage was introduced when we switched from calling
pkg-config directly to using get_pkgconfig_variable() in 7.5.0
and, somehow, it went undetected until now.
Use "includedir", which is a proper pkg-config variable,
instead.
Fixes: c32c5ca29a
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
When -device is configured via JSON a bug [1] is triggered in qemu were
the DEVICE_DELETED event for the removal of the device frontend is no
longer delivered to libvirt. Without the DEVICE_DELETED event we don't
remove the corresponding entries in the VM XML.
Until qemu will be fixed we must stop using the JSON syntax for -device.
This patch removes the detection of the capability. The capability is
used only during startup of a fresh VM so we don't need to consider any
compaitibility steps for existing VMs.
For users who wish to use 'libvirt-7.9' and 'libvirt-7.10' with
'qemu-6.2' there are two possible workarounds:
- filter out the 'device.json' qemu capability '/etc/libvirt/qemu.conf':
capability_filters = [ "device.json" ]
- filter out the 'device.json' qemu capability via qemu namespace XML:
<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
[...]
<qemu:capabilities>
<qemu:del capability='device.json'/>
</qemu:capabilities>
</domain>
We must never again use the same capability name as we are now
instructing users to filter it as a workaround so once qemu is fixed
we'll need to pick a new capability value for it.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=2036669
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2035237
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't usually provide manual pages for internal tools,
but in the case of virt-ssh-helper the command is installed
inside the default $PATH and so it's likely that the user
will stumble upon it by using the shell's completion feature
when invoking another virt-* command, which makes it a good
idea to provide at least a minimal manual page.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virConnectOpenAuth() calls virConnectOpenInternal(). This later function
generates fine grained errors arising from various failure conditions that are
more accurate than a "catch all" broader VIR_ERR_OPERATION_FAILED error that
the callers of this function generates. Remove the broader error so that more
specific errors can be caught and processed.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are a few glib functions that abort on OOM and thus there's
no point in checking their retval against NULL. Nevertheless, we
do have those checks in a few places. Remove them.
Generated using the following spatch:
@@
expression x;
identifier n;
expression r;
@@
(
x = g_strdup_printf(...);
| x = g_strdup_vprintf(...);
| x = g_strdup(...);
| x = g_strndup(...);
| x = g_new0(...);
| x = g_realloc(...);
)
... when != x
- if(!x)
(
- return r;
|
- goto n;
)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both virProcessGetStatInfo() and virProcessGetSchedInfo() are
Linux centric. Provide stubs for non-Linux platforms.
Fixes: d73852c499
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Until now we did 2 weird things when inserting the qemuCaps used for
individual test cases into the capability cache:
1) we inserted the same caps for all emulators
2) we always (expensively) copied them
Now when real capabilities are used we don't touch them at all just
simply inser them. This allows us one big optimization, by trading a
copy for just a virObjectRef as we can borrow the caps object to the
cache.
For fake caps we still copy them as we insert the fake machine types
into them, but second big optimization is to insert the capabilities
only for the architecture they belong to.
Additionally this commit also ensures that all other entries in the
cache for the binary are poisoned by empty caps so that it's obvious
that the test is doing the right thing.
Apart from this making actually more sense this shaves off more than 40%
of runtime from qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Emulator binary change is needed to use the latest caps properly. The
comment is no longer needed, the expected error is recorded in the 'err'
file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Also ensure that the emulator and architecture are correct for
DO_TEST_CAPS_LATEST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As demonstrated by the qemuxml2xmltest DO_TEST_CAPS_LATEST data based on
the 'x86-kvm-32-on-64' test case the post parse CPU selection code which
fills in the CPU into the definition does not have exactly the same
logic as we used to have when the cpu model was picked when formatting
the commandline.
Change the qemuxml2argv test to use DO_TEST_CAPS_LATEST too as it
doesn't really make sense to test this on fake data.
In addition to 'latest' versions, this also adds second invocation
locked to qemu-4.1.0 which demonstrates the old behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fake capabilities are inserted twice, as in a few tests the architecture
is not present in the XML (testing filling in of the architecture).
Since we already know which architecture will be picked we don't need to
be adding the capabilities twice.
This doesn't impact the tests as they use the same approach to determine
the default arch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will modify how we populate the capability cache in
tests to be more sane. This also means that the emulator binary and
architecture used in the test files using real capabilities must match
what the real capabilities have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will modify how we populate the capability cache in
tests to be more saner. This also means that the emulator binary and
architecture used in the test files using real capabilities must match
what the real capabilities have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The specific machine type is not important for the test. We can use 'pc'
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuxml2argv invocation of some tests used DO_TEST_CAPS_LATEST while
the qemuxml2xmltest invocation uses fake caps. Unify them on
DO_TEST_CAPS_LATEST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since introduction in fc03eb53c0 there wasn't a qemuxml2argv
version. As we are touching the files convert them to
DO_TEST_CAPS_LATEST directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
According to commit 5222256849 the test case was added to verify that
the '<address>' element is covered by the schema. The test was not
registered for qemuxml2argvtest though. We can use 'net-server' instead
as it has the same type. On the other hand that one was not registered
for qemuxml2xmltest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's nothing special about the tests requiring to use very old
machine types. Most usage is cargo-culted from other tests. Switch all
the tests to use 'pc' instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For tests with fake capabilities we fill in a bunch of machine types
which the tests might use. For now there's a random collection of
machine types which are not actually used. Purge the unused ones for
non-x86 machines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The two test cases were added to avoid regressions such as fixed in
17dff35848. Nowadays the code is much simpler and any Q35 machine
will trigger the explicit FDC.
Remove the '2.11' machine type version and turn the '2.9' version into a
generic q35 machine.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit c7f3a1f787 turned qemuDomainMachineNeedsFDC() effectively into
qemuDomainIsQ35. Use it instead as it also matches the non-canonicalized
'q35'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All the fd-passing setup of chardevs which this hack meant to disable
was moved to the host-preparation phase which is skipped for formatting
of non-real commandlines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virURIParamAppend() unconditionally returns 0. Simplify and make the return type
as void type.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Move qemuGetProcessInfo and qemuGetSchedInfo methods to util and share them
with ch driver.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This change adds the domain name in the error and debug logs during
monitor IO processing so that we may infer which VM experienced
errors such as IO or socket hangup. This may help in debugging
monitor IO errors.
Signed-off-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
DEBUG_IO and DEBUG_RAW_IO are disabled and hence the code #defined under them
are useless. Remove them.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In a few places (e.g. device attach/detach/update) we are given a
device XML, parse it but then need a copy of parsed data so that
the original can be passed to function handling the request over
inactive XML and the copy is then passed to function handling the
operation over live XML. Note, both functions consume passed
device on success, hence the need for copy.
The problem is in combination of how the copy is obtained and
where is passed. The copy is done by calling
virDomainDeviceDefCopy() which does only inactive copy, i.e. no
live information is copied over (e.g. no aliases).
Then, this copy (inactive XML effectively) is passed to function
handling live part of the operation (e.g.
qemuDomainUpdateDeviceLive()) and the definition containing all
the juicy, live bits is passed to function handling inactive part
of the operation (e.g. qemuDomainUpdateDeviceConfig()).
This is rather incorrect, and XML copies should be passed to
their respective functions.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2036895
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
There is no need to do that since both fallible functions do that already.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Callers that already do this anyway can be cleaned up thanks to this and the one
that does not (daemon startup) gains the benefit of the error being printed to
standard error output changing:
LIBVIRT_LOG_OUTPUTS=1:invalid libvirtd
/home/nert/dev/libvirt/upstream/build/src/libvirtd: initialisation failed
into:
LIBVIRT_LOG_OUTPUTS=1:invalid libvirtd
libvirt: error : invalid argument: Invalid destination 'invalid' for output '1:invalid'
/home/nert/dev/libvirt/upstream/build/src/libvirtd: initialisation failed
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
And make callers check the return value as well. This helps error out early for
invalid environment variables.
That is desirable because it could lead to deadlocks. This can happen when
resetting logging after fork() reports translated errors because gettext
functions are not reentrant. Well, it is not limited to resetting logging after
fork(), it can be any translation at that phase, but parsing environment
variables is easy to make fail on purpose to show the result, it can also happen
just due to a typo.
Before this commit it is possible to deadlock the daemon on startup
with something like:
LIBVIRT_LOG_FILTERS='1:*' LIBVIRT_LOG_OUTPUTS=1:stdout libvirtd
where filters are used to enable more logging and hence make the race less rare
and outputs are set to invalid
Combined with the previous patches this changes
the following from:
...
<deadlock>
to:
...
libvirtd: initialisation failed
The error message is improved in future commits and is also possible thanks to
this patch.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This prevents starting any daemons with improper logging settings. This is
desirable on its own, but will be even more beneficial when more functions start
reporting errors and failing on them, coming up in following patches
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The only difference is that we are not going to be guaranteed that the mutex is
normal (as opposed to recursive, although there is no system known to me that
would default to recursive mutexes), but that was done only to find occasional
errors (during runtime, back in 2010, commit 336fd879c0). Functions using
this mutex are mostly stable and unchanging, and it makes the virLogOnceInit()
function only return 0 (or possibly abort in glib calls). On top of that we can
assume that the virLogMutex is always initialized which enables us to be more
consistent in some early error reporting.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
After attesting a domain with the help of domlaunchsecinfo,
domsetlaunchsecstate can be used to set a secret in the guest
domain's memory prior to running the vcpus.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Set a launch secret in guest memory using the sev-inject-launch-secret
QMP API. Only supported with qemu >= 6.0.0 and SEV-enabled guests in a
paused state.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The 'sev-inject-launch-secret' qmp command is only available with
qemu >= 6.0.0. Introduce a capability for sev-inject-launch-secret.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This API allows setting a launch secret within a guests's memory. The
launch secret is created by the guest owner after retrieving and
verifying the launch measurement with virDomainGetLaunchSecurityInfo.
The API uses virTypedParameter for input, allowing it to be expanded
to support other confidential computing technologies. In the case of
SEV, a basic guest launch workflow is described in the SEV API spec
in section "1.3.1 Launch"
https://www.amd.com/system/files/TechDocs/55766_SEV-KM_API_Specification.pdf
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As described in the previous commit, the units for 'burst' are
kibibytes and not kilobytes, i.e. multiples of 1024 not 1000.
Therefore, when constructing ovs-vsctl command the burst value
must be multiplied by 1024 and not just 1000. And because ovs
expects this size in bits the value has to be multiplied again by
8.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1510237#c26
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The burst attribute for bandwidth specifies how much bytes can be
transmitted in a single burst. Therefore, the unit is in
multiples of 1024 (thus kibibytes) not SI-like 1000. It has
always been like that.
The 'tc' output is still confusing though, for instance:
# tc class add dev $DEV parent 1: classid 1:1 htb rate 1000kbps burst 2097152
# tc class show dev vnet2
class htb 1:1 root rate 8Mbit ceil 8Mbit burst 2Mb cburst 1600b
Please note that 2097152 = 2*1024*1024. Even the man page is
confusing. From tc(8):
kb or k Kilobytes
mb or m Megabytes
But I guess this is because 'tc' predates IEC standardisation of
binary multiples and thus can't change without breaking scripts
parsing its output.
And while at it, adjust _virNetDevBandwidthRate struct member
description, to make it obvious which members use SI/IEC units.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There are few places in virDomainDefFormatFeatures() which can
use virXMLFormatElement() or virXMLFormatElementEmpty() instead
of writing directly into the output buffer.
After this, there are still a lot of places left, but that is
much bigger task.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There's no real difference between input and output XMLs for
kvm-features and kvm-features-off test cases. Do what we usually
do in such case - turn the output file into a symlink of the
input file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We have a subdirectory specifically for CSS files now, so it makes
sense to have the stylesheet that defines fonts to be there too.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This unclutters the top-level docs directory.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
According to ioctl_ficlonerange(2)
These ioctl operations [FICLONE and FICLONERANGE] first
appeared in Linux 4.5. They were previously known as
BTRFS_IOC_CLONE and BTRFS_IOC_CLONE_RANGE, and were private
to Btrfs.
We no longer target any distro that comes with a kernel older
than 4.5, so we can stop looking for the btrfs and xfs
specific versions of the constant and just use the generic
version directly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virt_socket_lib is built from virnetsocket.c (among others).
But this file includes virprobe.h which includes libvirt_probes.h
which is a generated file. But this dependency is not recorded in
meson which may lead to a failed build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The virDomainTPMDefFormat() function can't fail really. There's
no point in it returning an integer then. Make it return void and
fix both places which check for its retval.
And while at it, turn @def into a const pointer to make it
obvious the function does not modify passed struct.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Make the tpm-*.xml files symlinks to their respective input XMLs
from qemuxml2argvdata/ directory. Neither of the XMLs relies on
autofill of any TPM data.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The <tpm/> element formatting is handled in
virDomainTPMDefFormat() which uses the "old style" - appending
strings directly into the output buffer. With this, it's easy to
get conditions that tell when an element has ended wrong. In this
particular case, if both <encryption/> and <active_pcr_banks/>
are to be formatted the current code puts a stray '>' into the
output buffer, resulting in invalid XML.
Rewrite the function to use virXMLFormatElement() which is more
clever.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2016599#c15
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We already have the input xml because of xml2arg test. However,
the corresponding xml2xml test case is missing. Make the expected
XML a symlink to the input XML and clean the latter up a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'qemucapabilitiesnumbering' tool now replaces the role of this
script and provides way to programmatically modify the replies file on
top.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The tool is assembled from individual bits used for tests and actual
capturing of the replies files. The tool ensures correct numbering and
formatting of entries.
In normal usage mode it masks as a test which validates formatting and
numbering of the tests/qemucapabilitiesdata/*.replies files. This tool
was actually used to produce commits 096ac87a1a and aa21615ccb.
In case a manual modification of the replies file is needed the
'modify()' function provides a convenient way to do programatic
modification of the caps file.
As an example the modify() function has commented-out code which
provides a basic scaffold to do modifications along with a how-to.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make the parser reusable by extracting it and making it parse into
command,reply tuples.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new helper replaces the 'value' part of the key-value tuple in an
object. The advantage of this new helper is that it preserves the
ordering of the key in the object when compared to a combination of
stealing the old key and adding a new value. This will be needed for a
new test/helper for validating and modifying qemu capabilities data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need libparted to be available at build time otherwise we
can't link against it; we don't, however, need the parted
command to be present until runtime and, just as is the case
for other commands, we already perform a lookup through the
virCommand API so making sure it's available at build time
is unnecessary.
This doesn't make any difference for platform such as Fedora
and CentOS, where both the library and the command are in the
same package, but others like Debian, Ubuntu and openSUSE
have separate packages for the two components and this change
means that we can install one less package at build time.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
As encryption norms get more strict it's easy to fall on the
insecure side. For instance, so far we are generating 2048 bits
long prime for Diffie-Hellman keys. Some systems consider this
not long enough. While we may just keep increasing the value
passed to the corresponding gnutls_* function, that is not well
maintainable. Instead, we may do what's recommended in the
gnutls_* manpage. From gnutls_dh_params_generate2(3):
It is recommended not to set the number of bits directly, but
use gnutls_sec_param_to_pk_bits() instead.
Looking into the gnutls_sec_param_to_pk_bits() then [1], 2048
bits corresponds to parameter MEDIUM.
1: https://www.gnutls.org/manual/gnutls.html#tab_003akey_002dsizes
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
According to the gnutls_dh_set_prime_bits() manpage:
The function has no effect in server side.
Therefore, don't call it when creating server side context.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now know exactly which GLib version we need to depend on
for the workaround to no longer be necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
All of these are affected by the same issue as the ones that
we're already skipping during this specific time interval.
Suggested-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Will keep things reasonable as we perform further code
movements.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
It is only needed if compatibility with clients that have
libvirt < 6.9.0 is required, and can be uninstalled otherwise.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reduce the delta in an upcoming change.
No change in behavior intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Apart from some churn, the important is the removal of 'netcf-devel'
from the fedora rawhide container.
Update to state as of 174fe4999204afcae (libvirt-ci).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
If needed 'virJSONValueIsNull' can be easily replaced by
'virJSONValueGetType(obj) == VIR_JSON_TYPE_NULL'.
'virJSONValueObjectIsNull' has confusing name because it checks that a
virJSONValue of OBJECT type has a key which is NULL, not that the object
itself is NULL. This can be replaced according to the needs e.g. by
virJSONValueObjectHasKey or the above check.
Both are unused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Replace the function by a call to virJSONValueNewString, when we copy
the string using g_strndup. Remove the unused helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
With 'g_strdup' not needing error handling we can ask callers to pass a
copy of the string which will be adopted by the JSON value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
In two instances we've created a string virJSONValue just to append it
to the array. Replace it by use of the virJSONValueArrayAppendString
helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
In cases where the qcow2 image is using subclusters/extended_l2 entries
we should propagate them to the new images which are based on such
images.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to be able to propagate image configuration to newly formatted
images we need to be able to query it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow creating the qcow2 with the new subcluster format if required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add machinery for probing the incompatible feature flags field and
specifically extract whether the extended l2 feature (1 << 4) is
present.
For now we don't care abot the other features.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prepare for extraction of features from the 'incompatible features'
group.
This is done by moving the extraction loop into a new function called
qcow2GetFeaturesProcessGroup. The new function also allows to ingore
features we don't care about by passing VIR_STORAGE_FILE_FEATURE_LAST as
the target flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QCOW2 images now support 'extended_l2' which splits the default clusters
into 32 subcluster allocation units. This allows the allocation units to
be smaller without increasing the size of L2 table too much and thus also
the cache requirements for holding the full L2 table in memory.
Unfortunately it's incompatible with qemu versions older than 5.2 thus
can't be used as default.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Apart from the bulk conversion itself, the section names 'general
metadata' and 'target elements' were duplicated between the storage pool
and storage volume sections. To prevent heading name clashes they were
renamed appropriately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The internals/eventloop document uses two images for
illustrative purposes, but unlike other graphics included
in the documentation these are not part of libvirt.git but
rather were added to libvirt-media.git with
commit fae5622074cf5e18d190496f8a43260c614599b2
Author: Michal Privoznik <mprivozn@redhat.com>
Date: Mon Jun 6 17:27:50 2016 +0200
Add two event loop images
These images are going to be used in our documentation of the
event loop.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
fae5622074
and are requested directly from there. Specifically, the
URLs point to the libvirt.org mirror of libvirt-media.git
instead of the primary repository hosted on GitLab.
Import the images into libvirt.git so that the website
doesn't rely on external resources and can, if desired, be
browsed entirely offline from installed packages.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 93e9e92c1e eliminated the option for skipping but left code in
the s390 check which makes use of a skip. This leads to an output
without result destroying the correct format. e.g.
QEMU: Checking for hardware virtualization : PASS
QEMU: Checking if device /dev/kvm exists : PASS
QEMU: Checking if device /dev/kvm is accessible : PASS
QEMU: Checking if device /dev/vhost-net exists : PASS
QEMU: Checking if device /dev/net/tun exists : PASS
QEMU: Checking for cgroup 'cpu' controller support : PASS
QEMU: Checking for cgroup 'cpuacct' controller support : PASS
QEMU: Checking for cgroup 'cpuset' controller support : PASS
QEMU: Checking for cgroup 'memory' controller support : PASS
QEMU: Checking for cgroup 'devices' controller support : PASS
QEMU: Checking for cgroup 'blkio' controller support : PASS
QEMU: Checking for device assignment IOMMU support : QEMU: Checking for secure guest support : PASS
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function was formatted weirdly which prompted additions to conform
to the unusual style.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are two functions that take variable arguments:
vshTableNew() and vshTableRowAppend(). Both expect the list of
arguments to be NULL terminated. Annotate them with
G_GNUC_NULL_TERMINATED to enable compile time check for this.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use modern style of function declarations where the return type
and function name are on two separate lines.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need for any caller to know vshTableRow typedef.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In testVshTableNew() we test whether vshTableNew(NULL) allocates
a table. This is expected to fail (and return NULL), because
passing nothing but NULL to vshTableNew() is viewed as error.
Nevertheless, if vshTableNew() did not fail and returned an
allocated table it would be leaked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous commit, it's no longer possible to change nodeset
for strict numatune. Therefore, we can start generating
host-nodes onto command line again.
This partially reverts d73265af6e.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Let's imagine a guest that's configured with strict numatune:
<numatune>
<memory mode='strict' nodeset='0'/>
</numatune>
For guests with NUMA:
Depending on machine type used (see commit v6.4.0-rc1~75) we
generate either:
1) -object '{"qom-type":"memory-backend-ram","id":"ram-node0",\
"size":20971520,"host-nodes":[0],"policy":"preferred"}' \
-numa node,nodeid=0,cpus=0,memdev=ram-node0
or
2) -numa node,nodeid=0,cpus=0,mem=20480
Later, when QEMU boots up and cpuset CGroup controller is
available we further restrict QEMU there too. But there's a
behaviour difference hidden: while in case 1) QEMU is restricted
from beginning, in case 2) it is not and thus it may happen that
it will allocate memory from different NUMA node and even though
CGroup will try to migrate it, it may fail to do so (e.g. because
memory is locked). Therefore, one can argue that case 2) is
broken. NB, case 2) is exactly what mode 'restrictive' is for.
However, in case 1) we are unable to update QEMU with new
host-nodes, simply because it's lacking a command to do so.
For guests without NUMA:
It's very close to case 2) from above. We have commit
v7.10.0-rc1~163 that prevents us from outputting host-nodes when
generating memory-backend-* for system memory, but that simply
allows QEMU to allocate memory anywhere and then relies on
CGroups to move it to desired location.
Due to all of this, there is no reliable way to change nodeset
for mode 'strict'. Let's forbid it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The whole idea of VIR_DOMAIN_NUMATUNE_MEM_RESTRICTIVE is that the
memory location is restricted only via CGroups and thus can be
changed on the fly (which is exactly what
qemuDomainSetNumaParamsLive() does. Allow this mode there then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The completer is trivial, just iterate over
virDomainNumatuneMemMode enum and convert each integer into its
string comrade.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
While we document possibility of passing an integer from
virDomainNumatuneMemMode enum, we list string variants to only
the first three enum members. The fourth (and so far the last)
member is called 'restrictive' and thus should be documented.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Under the qemucapabilitiesdata we have a replies file for
QEMU-3.0.0.ppc64. At least we think so. In fact, the file
contains replies from a development snapshot release that
predates 3.0.0 (specifically it's v2.12.0-1689-g518d23a) and as
such does not reflect any change that was made to QEMU after the
snapshot and before the official relase. One of such changes was
renaming 'exit-preconfig' command to 'x-exit-preconfig' (QEMU
commit v3.0.0-rc1~21^2~3). Ideally, we would just regenerate
capabilities using the official release but since this is a PPC64
machine and pretty old version anyway let's just fix the command
name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Set the kernel-hashes property on the sev-guest object if the config
asked for it explicitly. While QEMU machine types currently default to
having this setting off, it is not guaranteed to remain this way.
We can't assume that the QEMU capabilities were generated on an AMD host
with SEV, so we must force set the QEMU_CAPS_SEV_GUEST. This also means
that the 'sev' info in the qemuCaps struct might be NULL, but this is
harmless from POV of testing the CLI generator.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the QEMU tests a test can either use an explicitly listed set of
capabilities, or can request those matching a particular QEMU
version. Sometimes it is desirable to be able to list extra caps
on top of those implied by a particular version.
This is useful, for example, when QEMU won't report certain features
unless it was run on particular hardware or kernels, and those were
not used when a caps snapshot was imported to the libvirt source tree.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This sev-guest object property indicates whether QEMU should
expose the kernel, ramdisk, cmdline hashes to the firmware
for measurement.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Normally the SEV measurement only covers the firmware
loader contents. When doing a direct kernel boot, however,
with new enough OVMF it is possible to ask for the
measurement to cover the kernel, ramdisk and command line.
It can't be done automatically as that would break existing
guests using direct kernel boot with old firmware, so there
is a new XML setting allowing this behaviour to be toggled.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The VNC password authentication scheme is quite horrendous in that it
takes the user password and directly uses it as a DES case. DES is a
byte 8 keyed cipher, so the VNC password can never be more than 8
characters long. Anything over that length will be silently dropped.
We should validate this length restriction when accepting user XML
configs and report an error. For the global VNC password we don't
really want to break daemon startup by reporting an error, but
logging a warning is worthwhile.
https://bugzilla.redhat.com/show_bug.cgi?id=1506689
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Over time, the code using them got split into other files.
(Mostly qemu_interface.c and qemu_process.c)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
A recent code movement introduced a bug which reproduces only when there
are two disks on the same bus missing the target. Improve the test case
for the missing target test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainDiskInsert' orders the inserted disks by target. If the target
is not provided though it would try to parse it anyways. This lead to a
crash when parsing a definition where there are multiple disks and of
two disks sharing the bus at least one also misses the target.
Since we want to actually use the parser for stuff which doesn't
necessarily need the disk target, we make virDomainDiskInsert tolerant
of missing target instead. The definition will be rejected by the
validator regardless of the order the disks were inserted in.
Fixes: 61fd7174
Closes: https://gitlab.com/libvirt/libvirt/-/issues/257
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These daemons do not have any support for unprivileged readonly
access, so we must not reference -ro.socket units in scripts.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 52521de8332c2323bd ("qemu: Use qemuDomainSaveStatus") replaced a call
to virDomainObjSave() with qemuDomainSaveStatus() as a part of cleanup. Since
qemuDomainSaveStatus() does not indicate any failure through its return code,
the error handling cleanup code got eliminated in the process. Thus upon
failure, we will no longer killing the started qemu process. This commit fixes
this by reverting the change that was introduced with the above commit.
Fixes: 52521de8332c2323bd ("qemu: Use qemuDomainSaveStatus")
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
qemu-6.2 is out, update the caps dump for the final time.
Notable changes:
- 'unstable' feature flag for various QMP schema entries
- 'aio-max-batch' iothread property
- 'kernel-hashes' knob for the 'sev-guest' object
- 'native-hotplug' of 'pcie-root-port' is now unstable again
- 'page-sampling/dirty-ring/dirty-bitmap' mode for 'calc-dirty-rate'
- 'toolsversion' field for the 'vmdk' disk format driver
- CPU changes resulting in 'core-capability' being present on the cpu
of the machine this dump was done on
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we only check whether the dnsmasq version is new enough,
there is no need for the caps field.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Since dnsmasq supports --ra-param for a long time, this code is now
unused.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
All the capabilities should be supported in 2.67.
Make this the minimum version, since even the oldest
distros we support have moved on:
Debian 8: 2.72
CentOS 7: 2.76
Ubuntu 18.04: 2.79
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The way our wireshark dissector works is by providing decoders
for primitive types (like integers, string, double, etc.) and
then parsing virsomethingprotocol.x files and generating complex
decoders for RPC. This obviously means that XDR is required for
the dissector, but corresponding check was missing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The admin module is very closely tied to RPC. If we are
building without RPC support there's not much use for the
admin module, in fact it fails to build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The logging manager is very closely tied to RPC. If we are
building without RPC support there's not much use for the
manager, in fact it fails to build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our RPC layer is as tied to XDR as possible. Therefore, if we
haven't detected and XDR library there's not much sense in trying
to build RPC layer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's nothing RPC specific about virnettlscontext.c or
virnetsocket.c. We use TLS for other things than just RPC
encryption (e.g. for generating random numbers) and sockets can
be used even without RPC.
Move these two sources into a static library (virt_socket) so
that other areas can use it even when RPC is disabled.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When implementing sparse streams, one of improvements I did was
to increase client buffer size for sending/receiving stream data
(commit v1.3.5-rc1~502). Previously, we were using 64KiB buffer
while packets on RPC are 256KiB (usable data is slightly less
because of the header). This meant that it took multiple calls of
virStreamRecv()/virStreamSend() to serve a single packet of data.
In my fix, I've included the virnetprotocol.h file which provides
VIR_NET_MESSAGE_LEGACY_PAYLOAD_MAX macro which is the exact size
of data in a single packet. However, including the file from
libvirt-stream.c which implements public APIs is not right. If
RPC module is not built then the file doesn't exists.
Redefine the macro and drop the include. The size can never
change anyways.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
And its callers. The parameter is no longer used since virDomainObjSave
was replaced with qemuDomainSaveStatus wrapper.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is a nice wrapper around virDomainObjSave which logs a warning, but
otherwise ignores the error. Let's use it where appropriate.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When return-path is enabled, QEMU on the source host won't report
completed migration until the destination QEMU sends a confirmation it
successfully loaded all data. Libvirt would detect such situation in the
Finish phase and report the error read from QEMU's stderr back to the
source, but using return-path could give use a bit better error
reporting with an earlier restart of vCPUs on the source.
The capability is only enabled when the connection between QEMU
processes on the source and destination hosts is bidirectional. In other
words, only when VIR_MIGRATE_TUNNELLED is not set, because our tunnel
only allows one-way communication from the source to the destination.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
So far we were enabling specific migration capabilities when a
corresponding API flag is set. We need to generalize our code to be able
to enable some migration capabilities unless a particular API flag is
used.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Different CPU generations have different limits on the number
of SEV/SEV-ES guests that can be run. Since both limits come
from the same overall set, there is typically also BIOS config
to set the tradeoff betweeen SEV and SEV-ES guest limits.
This is important information to expose for a mgmt application
scheduling guests to hosts.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This will be needed directly in the QEMU driver in a later patch.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are limits on the number of SEV/SEV-ES guests that can
be run on machines, which may be influenced by firmware
settings. This is important to expose to users.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are limits on the number of SEV/SEV-ES guests that can
be run on machines, which may be influenced by firmware
settings. This is important to expose to users.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
While some SEV info is reported in the domain capabilities,
for reasons of size, this excludes the certificates. The
nodesevinfo command provides the full set of information.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This command reports the launch security parameters for
a guest, allowing an external tool to perform a launch
attestation.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Report extra info about the SEV setup, returning those fields
that are required to calculate the expected launch measurement
HMAC(0x04 || API_MAJOR || API_MINOR || BUILD ||
GCTX.POLICY || GCTX.LD || MNONCE; GCTX.TIK)
specified in section 6.5.1 of AMD Secure Encrypted
Virtualization API.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We're only returning the set of fields needed to perform an
attestation, per the SEV API docs.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Three more parameters are required in order that clients can
perform a launch attestation on the SEV guest.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since commit 46783e6307, the 'virsh dominfo' command calls
virDomainGetMessages to report any messages from the domain.
Hypervisors not implementing the API now get the following
libvirtd log message when clients invoke 'virsh dominfo'
this function is not supported by the connection driver: virDomainGetMessages
Although libxl currently does not support any tainting or
deprecation messages, provide an implementation to squelch
the previously unseen error message when collecting dominfo.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, this attribute may either have a value of "custom", or be absent
(which defaults to "custom"), for backwards compatibility.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow for an optional attribute "mode", set to the string "custom".
Later patches will introduce different modes. Omitting this attribute
will default to "custom" for backwards compatibility.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This does not change the schema, but will make upcoming changes
easier.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use two variables with automatic cleanup instead of reusing one.
Remove the pointless cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reduce the scope of the variable to avoid mixing automatic and manual
cleanup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto for dnsmasq context and remove the cmd variable.
It was unused since its introduction in:
commit 8b32c80df0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto and get rid of the cleanup label, as well as the ret
variable.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto where possible, reduce scope of some variables and remove
pointless ret and rc variables.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On QEMU command line it's represented by the dirty-ring-size
attribute of KVM accelerator.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Dirty ring feature was introduced in qemu-6.1.0, this patch
add the corresponding feature named 'dirty-ring', which enable
dirty ring feature when starting VM.
To enable the feature, the following XML needs to be added to
the guest's domain description:
<features>
<kvm>
<dirty-ring state='on' size='xxx'>
</kvm>
</features>
If property "state=on", property "size" must be specified, which
should be power of 2 and range in [1024, 65526].
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In future commits we will need to store not just an array of
VIR_TRISTATE_SWITCH_* but also an additional integer. Follow the
example of TCG and introduce a structure where both the array an
integer can live.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is no longer anything to initialize at binary startup time.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since the currentBackend (direct vs. firewalld) setting is no longer
used for anything, we don't need to set it (either explicitly from
tests, or implicitly during init), and can completely remove it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's unclear exactly why this check exists; possibly a parallel to a
long-removed check for the firewall-cmd binary (added to viriptables.c
with the initial support for firewalld in commit bf156385a0 in 2012,
and long since removed), or possibly because virFirewallOnceInit() was
intended to be called at daemon startup, and it seemed like a good
idea to just log this error once when trying to determine whether to
use firewalld, or direct iptables commands, and then not waste time
building commands that could never be executed. The odd thing is that
it would sometimes result in logging an error when it couldn't find a
binary that wasn't needed anyway (e.g., if all the rules were iptables
rules, but ebtables and/or ip6tables weren't also installed).
If we just remove this check, then virCommandRun() will end up logging
an error and failing if the needed binary isn't found when we try to
execute it, which seems like it should just as good (or at least good
enough, especially since we eventually want to get rid of iptables
completely).
So let's remove it!
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function doesn't have anything to do with manipulating
virFirewall objects, but rather should be called in response to dbus
events about the firewalld service. Move this function into
virfirewalld.c, and rename it to virFirewallDSynchronize().
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function doesn't need to check for a backend - synchronization
with firewalld should always be done whenever firewalld is registered
and available, not just when the firewalld backend is selected.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit b19863640 both useful cases of the switch statement in
this function have made the same call (and the other/default case is
just an error that can never happen). Eliminate the switch to help
eliminate use of currentBackend.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It isn't intuitive (to me) that a test just converting xml text into
iptables commands should need to call dbus, so rather than forcing the
next person to look through the commit logs and/or run the test under
gdb to understand why this is needed, just add a short comment in the
source.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Several functions were simplified to remove the only cleanup code at
the cleanup label, making it unnecessary.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When libvirt added support for firewalld, all iptables/ebtables rules
were added via the firewalld "passthrough" API when firewalld was
enabled (the "firewalld backend"), or run directly by libvirt when
firewalld was disabled (the so-called "direct
backend"). virfirewalltest.c dutifully ran each test twice, once with
the each backend enabled.
But commit b19863640d changed the code to *always* directly run
iptables/ebtables commands, and never use the firewalld passthrough
API, effectively making the direct and firewalld backends identical,
except that when libvirt receives notice that firewalld has restarted
or reloaded its rules, the firewalld backend sends an extra "iptables
-V" command via firewalld's passthrough API (and waits for a response)
prior to running all the rest of the iptables commands directly; this
assures that a newly-restarted firewalld has finished its work on the
filter tables before libvirt starts messing with it. (Because this
code is only executed in response to an event from dbus, it isn't
tested in the unit tests).
In spite of this, we still go through all the virfirewall tests twice
though - once for the direct backend, and once for the firewalld
backend, even though these take the same codepath.
In commit b19863640d I had left this double-testing in thinking that
someday we might go back to actually doing something useful with the
firewalld backend in the course of adding support for native nftables,
but I've now realized that for the case of nftables we will be *even
more* divorced from firewalld, so there is really no point in keeping
this code around any longer. (It's likely/probable that the tests will
be done twice again in the future, but it will be enough different
that it is better to remove this code and re-implement from scratch
when adding the nftables backend, rather than trying to directly
modify the existing code and end up with something even more
confusing).
This patch eliminates all the test duplication in virfirewalltest.c,
including mocking dbus, which is unnecessary since none of the tests
use dbus (for now we ensure that by explicitly setting the virfirewall
backend to DIRECT before any of the tests have run. Eventually the
concept of a "firewalld backend" will disappear completely, but that's
for another patch.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than calling these "ADD" and "REMOVE", which could be confused
with some other random items with the same names, make them more
specific by prepending "VIR_NETFILTER_" (because they will also be
used by the nftables backend) and rename them to match the
iptables/nftables operators they signify, i.e. INSERT and DELETE, just
to eliminate confusion (in particular, in case someone ever decides
that we need to also use the nftables "add" operator, which appends a
rule to a chain rather than inserting it at the beginning of the
chain).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function formats an address + prefix as, e.g. 192.168.122.0/24,
which is useful in places other than iptables. Move it to
virsocketaddr.c and make it public so that others can use it. While
moving, the bit that masks off the host bits of the address is made
optional, so that the function is more generally useful.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The network driver has put all its rules into private chains (created
by libvirt) since commit 7431b3eb9a, which was included in
libvirt-5.1.0. When the conversion was made, code was included that
would attempt to delete existing rules in the default chains, to make
it possible to upgrade libvirt without restarting the host OS.
Almost 3 years has passed, and it is doubtful that anyone will be
attempting to upgrade directly from a pre-5.1.0 libvirt to something
as new as 8.0.0 (possibly with the exception of upgrading the entire
OS to a new release, which would include also rebooting), so it is now
safe to remove this code.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto for virCommand and char * and drop the cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic cleanup for virCommand, steal it on success
and remove the error label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto and remove the ret variable, as well as the cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto and remove the 'ret' variable, as well as the out label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto and remove the 'ret' variable, as well as the cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto and remove the 'ret' variable, as well as the cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After previous commit it's possible for domains to fine tune TCG
features (well, just one - tb-cache). Check that domain has TCG
enabled, otherwise the feature makes no sense.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It may come handy to be able to tweak TCG options, in this
specific case the size of translation block cache size (tb-size).
Since we can expect more knobs to tweak let's put them under
common element, like this:
<domain>
<features>
<tcg>
<tb-cache unit='MiB'>128</tb-cache>
</tcg>
</features>
</domain>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When using the monolithic daemon the driver for virStream is
always virFDStreamDrv and thus calling virStreamInData() results
in calling virFDStreamInData().
But things are different with split daemon, especially when a
client connects to one of hypervisor daemons (e.g. virtqemud) and
then lets the daemon connect to the storage daemon for
vol-upload/vol-download. Here, the hypervisor daemon acts like
both client and server. This is reflected by stream->driver
pointing to remoteStreamDrv, which doesn't have streamInData
callback implemented and thus vol-upload/vol-download with sparse
flag fails.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2026537
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The aim of this function is to look at a virNetClientStream and
tell whether the incoming packet (if there's one) contains data
(type VIR_NET_STREAM) or a hole (type VIR_NET_STREAM_HOLE) and
how big the section is. This function will be called from the
remote driver in one of future commits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
So far, virStreamInData() is effectively a wrapper over
virFDStreamInData() which means it deals with files which can be
rewound (lseek()-ed) to whatever position we need. And in fact,
that's what virFDStreamInData() does - it makes sure that the FD
is left unchanged in terms of position in the file. Skipping the
hole happens soon after - in daemonStreamHandleRead() when
virStreamSendHole() is called.
But this is about to change. Soon we will have another implementation
where we won't be dealing with FDs but virNetMessage queue and it will
be handy to pop message at the beginning of the queue. Implement and
document this new behavior.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In the QEMU driver, we allocate private source data unconditionally
for every chardev and the rest of the function just assumes it's there.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
After recent cleanups, there are some pointless cleanup sections.
Clean them up.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Return the desired values directly and clean up the redundant
else branches.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Convert all the functions that generate virCaps to use g_auto
and g_steal_pointer.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Convert all the users who unref their virCaps object unconditionally.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When adding the ACL check and caps getter, we assumed that
the default return value is -1, not 0 as usual.
Fix the return value on error by assigning them explicitly.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
shared_module() is intended for shared objects that are
loaded at runtime using dlopen() whereas NSS plugins need to
be full-fledged shared libraries with, among other things, a
proper SONAME.
Meson seems to have become more strict about this recently,
because libnss_libvirt.so.2 gets a SONAME when I build it with
Meson 0.59.4 on Fedora 34 but doesn't when I use Meson 0.60.2
on Debian testing instead.
Either way, shared_library() was always the right function
to use for NSS plugins.
Fixes: 36780c9319
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As of ff024b60cc we are opening chardevs before starting QEMU.
However, we are also doing that before domain private directories
are created. This leaves us unable to create guest agent socket
which lives under priv->channelTargetDir.
While creating the dirs can be moved just before
qemuProcessPrepareHostBackendChardev() it's better to do it as
the very first step so that this kind of error is prevented in
future.
Fixes: ff024b60cc
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Specifically:
* use the correct notation and markup for commands, options
and arguments;
* rename arguments meta-variables to be more descriptive;
* sort options so that the most common ones come first;
* use consistent vertical spacing;
* fix a typo.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Specifically, include non-option argument 'GUEST-XML-FILE'
in usage summary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Specifically:
* include non-option argument 'URI' in usage summary;
* mention that it's an internal tool not meant to be
called directly;
* exit earlier if required arguments are absent.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's a getopt interface and we're not using getopt, at least
directly, so even though it works relying on it feels wrong.
GOption takes care of removing any trace of the arguments it
consumes from argc and argv, leaving behind only non-option
arguments, so we can just use those standard variables.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the backend of the TPM is a chardev we can use the common helper
to instantiate it.
This commit also ensures proper ordering so that the backend chardev is
formatted before it's being referenced.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add handling to qemuDomainDeviceBackendChardevForeachOne and callbacks
so that we can later use 'qemuBuildChardevCommand' for TPM devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the API for qemuBuildChrChardevCommand is sane enough, we can
use it to centralize formatting of '-chardev' generally.
The 'virDomainVideoDef' doesn't use 'virDomainChrSourceDef' internally so
we create it for this occasion manually.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the API for qemuBuildChrChardevCommand is sane enough, we can
use it to centralize formatting of '-chardev' generally.
The 'virDomainFSDef' doesn't use 'virDomainChrSourceDef' internally so
we create it for this occasion manually.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the API for qemuBuildChrChardevCommand is sane enough, we can
use it to centralize formatting of '-chardev' generally.
For virtiofs we don't have a centrally stored chardev source so we
allocate one inline for temporary use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add handling to qemuDomainDeviceBackendChardevForeachOne and callbacks
so that we can later use 'qemuBuildChardevCommand' for vhost-user disks
instead of a custom formatter.
Since we don't pass the FD for the vhost-user connection to qemu all of
the setup can be skipped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the parameter is unused we can remove it as well as from each
caller that doesn't need it any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When setting up TLS options from config in qemuDomainPrepareChardevSourceOne
we can also extract the x509 certificate path and default tlsVerify
setting so that 'qemuBuildChardevCommand' doesn't need to access the
config object any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Completely seprate the creation of the commandline string from the setup
of other objects instantiated on the commandline.
'qemuBuildChardevCommand' will aggregate the setup of individual
parameters such as -add-fd and setup of TLS and the -chardev parameter
itself while the code formatting the commandline will be moved into
qemuBuildChardevStr.
'fdset' names are then stored in qemuDomainChrSourcePrivate.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make the callers construct the alias for the chardev so that the
function can be used also for code paths which use a different
convention.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuBuildChrChardevStr' used a hybrid approach where some arguments
were directly added to '@cmd' while the commandline itself was returned
as a string.
This patch renames qemuBuildChrChardevStr to qemuBuildChardevCommand
and adds the argument directly to @cmd inside the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unify the cases for SCLP/SCLPLM/VIRTIO consoles as the code is
identical.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It was impossible to use _LATEST when commit d7c814f7f7 was modernizing
the cases as improper separation in the code caused that files were
created in the host during the testsuite run.
Now that the host manipulation when instantiating chardevs is separated
we can add the missing version.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the test cases won't cause host modification we can add the
contemporary versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have just one case when we wish to wait for incomming connections for
a listening socket and that is for vhost-user network devices.
Passing this via a flag to qemuBuildChrChardevStr is unwieldy. Add a
field to qemuDomainChrSourcePrivate and populate it for our special
case inside of qemuDomainPrepareChardevSourceOne.
Since we wait for incomming connections only on startup of a new VM we
also need to pass in a flag whether qemuDomainPrepareChardevSourceOne
is called on a new start or on hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the qemuDomainDeviceBackendChardevForeach helper to iterate all
eligible structs and convert the setup of the TLS defaults from the
config.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuBuildChrChardevStr' doesn't use these flags any more. Stop passing
them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The opening of files for FD passing for a chardev backend was
historically done in the function which is formatting the commandline.
This has multiple problems. Firstly the function takes a lot of
parameters which need to be passed through the commandline formatters.
This made the 'qemuBuildChrChardevStr' extremely unappealing to the
extent that we have multiple other custom formatters in places which
didn't really want to use the function.
Additionally the function is also creating files in the host in certain
configurations which is wrong for a commandline formatter to do. This
meant that e.g. not all chardev test cases can be converted to use
DO_TEST_CAPS_LATEST as we attempt to use such code path and attempt to
create files outside of the test directory.
This patch moves the opening of the filedescriptors from
'qemuBuildChrChardevFileStr' into a new helper
'qemuProcessPrepareHostBackendChardevOne' which is called using
'qemuDomainDeviceBackendChardevForeach'.
To preserve test behaviour we also have another instance
'testPrepareHostBackendChardevOne' which is populating mock
filedescriptors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce qemuDomainDeviceBackendChardevForeach(One) which calls the
callback if either given device has a chardev backend or for all chardev
backends of all devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The bitmap is allocated just above the explicit clear, so it's already
empty.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory clearing for virBitmap and remove a reuse of a
temporary string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There were two separate instances of string->virBitmap code:
virBitmapParseInternal and virBitmapParseUnlimited.
By adding a flag to switch to expanding APIs we can merge the two
implementations into one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to prepare for reuse of the function, move the allocation of
the bitmap to the caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the feature is not needed remove it and remove the function to
virBitmapParseInternal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function can't fail at this point. Remove the return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function can't fail at this point. Remove the return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function can't fail at this point. Remove the return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's nothing that can fail in the function. Remove the return value
and adjust callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function isn't used besides tests. Since the separator parsing
capability is trivial we can keep it in place and just unexport it for
now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for the temporary bitmap and remove the
pointless 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for the temporary bitmap and remove the
pointless 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for the temporary bitmap and remove the
pointless 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for the temporary bitmap and remove the
pointless 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for the temporary bitmap and remove the
pointless 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Automatically free 'cmd' and 'created' by moving them to the appropriate
scopes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for the temporary bitmap and remove the
pointless 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for the temporary bitmap and remove the
pointless 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for the temporary bitmap and remove the
pointless 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for the 'ret' bitmap and remove the
pointless 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Automatically free the 'slotmap' bitmap and get rid of the cleanup
section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_autoptr for the temp bitmap. To achieve this the variable must be
moved down to the appropriate scope.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory clearing for the temporary strings and bitmap and
remove the cleanup section. There are multiple temporary strings added
so that we don't reuse one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Automatically free the 'ret' temporary bitmap and get rid of the cleanup
section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic freeing where possible and use g_clear_pointer instead of
manual NULL-ing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the 'path' and 'type' variables down to the appropriate block and
use automatic freeing for them as well as the temporary virBitmap.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unfortunately, this fix breakes machinectl in a very nasty way,
for instance 'machinectl shell' drops into the host shell. It's
worse than being unable to start a container with CGroupsV1.
Revert until a proper fix is figured out.
This reverts commit 1b9ce05ce2.
References: https://gitlab.com/libvirt/libvirt/-/issues/182
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We need to make sure the URI scheme is present before passing
it to strchr(), otherwise we're going to get
$ virt-ssh-helper foo
Segmentation fault (core dumped)
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This reverts commit 69977ff105.
After previous commit it's no longer possible that QEMU driver is
not initialized in qemuStateShutdownPrepare() nor
qemuStateShutdownWait().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The initialization of drivers happens in a separate thread.
However, the main thread continues initialization and sets
shutdown callbacks (virStateShutdownPrepare() and
virStateShutdownWait()) even though the driver init thread is
still running. This is dangerous because if the daemon decides to
quit early (e.g. because SIGINT was delivered) the
shutdownPrepare and shutdownWait callback are called over
partially init drivers.
Set callbacks only after all drivers were initialized.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/218
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2027400
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use the modern style and fix all offenders since new functions were
already using the contemporary style.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The error is a hard error, so the part about fallback doesn't make
sense. Spell the attribute the same way as it's in XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A couple of links were still pointing to the obsolete Go
packages instead of the current module-aware ones.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
For x86, we invalidate qemu caps cache if the host CPUID changed.
However other cpu drivers do not have the 'getHostData' function
implemented.
Skip the comparison if we do not have host CPUData available,
since virCPUDataIsIdentical always returns an error in that case.
https://bugzilla.redhat.com/show_bug.cgi?id=2030119
Fixes: 3bc6f46d30
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Outline some of the basics and the caveats of the non-shared migration
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After conversion the table doesn't have to custom colors, but otherwise
seems to hold well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use it to enable the 'write-blocking' mode of 'blockdev-mirror'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Non-shared storage migration of guests which are disk I/O intensive and
have fast local storage may actually never converge if the guest happens
to dirty the disk faster than it can be copied.
This patch introduces a new flag
'VIR_MIGRATE_NON_SHARED_SYNCHRONOUS_WRITES' which will instruct
hypervisors to synchronize local I/O writes with the writes to remote
storage used for migration so that the guest can't overwhelm the
migration. This comes at a cost of decreased local I/O performance for
guests which behave well on average.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make the macro useful also for cases when one of multiple flags is
required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the paragraphs where the topic changes to simplify further
additions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using whitespace to align the '=' and values doesn't make sense for the
virDomainMigrateFlags enum as the visual block is interrupted by
comments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Wire up the flag to enable the 'write-blocking' 'copy-mode' of
'blockdev-mirror'.
It's not supported by all qemu versions but it is with those which we
use -blockdev with so we can use that instead of adding another custom
capability as we use blockdev for some time now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when the destination storage is slower than the normal VM
storage and the VM does intensive I/O to the disk a block copy job may
never converge.
Switching it to synchronous mode will ensure that all writes done by the
guest are propagated to the destination at the cost of slowing down I/O
of the guest to the synchronous speed.
This patch adds the new API flag and implements virsh support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Forces the data to be written synchronously to both the original and the
mirrored images which ensures that the job will reach synchronized
phase.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the construction of the command from the variable declaration so
that it doesn't exceed the line length and we can also move the logic of
determining the protocol outside of the command construction.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The migration API takes specific flags which are then converted to
boolean parameters for the command. Extract the flag into helper
variables rather than using ternary operators while constructing the
command itself.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of a ternary operator we can use the existing helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the cleanup sections where not needed after we've converted to
automatic freeing of virJSONValue.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the code to use g_autoptr for the few cases sill using explicit
cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the control flow so we can remove the cleanup label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't use 'goto' for looping. Extract the monitor interaction code into
a new function and restructure the logic to avoid jumping back in the
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't use 'goto' for looping. Extract the sync sending code into a new
function and restructure the logic to avoid jumping back in the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the unlinking of the state file right after reading it so that we
can get rid of the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the unlinking of the state file earlier and get rid of the cleanup
label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert two temp strings and one virJSONValue to g_auto(free|ptr).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virJSONValueObjectAdd instead of step-by-step construction of the
object. This also removes a handful impossible to reach errors with
translatable messages.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We use this approach for other APIs which take a virJSONValue as
argument and the logic is also simpler.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are a few uses which still explicitly free JSON objects, fix them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Whenever virPCIGetNetName() is called, it is either called with
physPortID = NULL, or with it set by the caller calling
virNetDevGetPhysPortID() soon before virPCIGetNetName(). The
physPortID is then used *only* in virPCIGetNetName().
Rather than replicating that same call to virNetDevGetPhysPortID() in
all the callers of virPCIGetNetName(), lets just have all those
callers send the NetDevName whose physPortID they want down to
virPCIGetNetName(), and let virPCIGetNetName() call
virNetDevGetPhysPortID().
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 795e9e05c3 (libvirt-7.7.0) refactored the code in virpci.c and
virnetdev.c that gathered lists of the Virtual Functions (VF) of an
SRIOV Physical Function (PF) to simplify the code.
Unfortunately the simplification made the assumption, in the new
function virPCIGetVirtualFunctionsFull(), that a VF's netdev
interface name should only be retrieved if the PF had a valid
phys_port_id. That is an incorrect assumption - only a small handful
of (now previous-generation) Mellanox SRIOV cards actually use
phys_port_id (this is for an odd design where there are multiple
physical network ports on a single PCI address); all other SRIOV cards
(including new Mellanox cards) have a file in sysfs called
phys_port_id, but it can't be read, and so the pfPhysPortID string is
NULL.
The result of this logic error is that virtual networks that are a
pool of VFs to be used for macvtap connections will be unable to
start, giving an errror like this:
VF 0 of SRIOV PF enp130s0f0 couldn't be added to the interface pool because it isn't bound to a network driver - possibly in use elsewhere
This error message is misinformed - the caller of
virNetDevGetVirtualFunctionsFull() only *thinks* that the VF isn't
bound to a network driver because it doesn't see a netdev name for the
VF in the list. But that's only because
virNetDevGetVirtualFunctionsFull() didn't even try to get the names!
We do need a way for virPCIGetVirtualFunctionsFull() to sometimes
retrieve the netdev names and sometimes not. One way of doing that
would be to send down the netdev name of the PF whenever we also want
to know the netdev names of the VFs, but send a NULL when we
don't. This can conveniently be done by just *replacing* pfPhysPortID
in the arglist with pfNetDevName - pfPhysPortID is determined by
simply calling virNetDevGetPhysPortID(pfNetDevName) so we can just
make that call down in virPCIGetVirtualFunctionsFull() (when needed).
This solves the regression introduced by commit 795e9e05c3, and also
nicely sets us up to (in a subsequent commit) move the call to
virNetDevGetPhysPortID() down one layer further to virPCIGetNetName(),
where it really belongs!
Resolves: https://bugzilla.redhat.com/2025432
Fixes: 795e9e05c3
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The Homebrew package explicitly enables this driver despite us
disabling it by default on macOS, so it must be functional to
at least some extent and certainly can't be causing any build
failures.
Additionally, if the user has explicitly asked for the network
driver to be enabled but libvirtd is disabled for whatever
reason, we should error out instead of silently disabling the
network driver.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanups some labels became needless because they
contain just a return statement. There's no point in having such
labels.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of calling virDomainDefFree() explicitly, we can annotate
variables with g_autoptr().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of calling VIR_FREE() explicitly, we can annotate
variables with g_autofree.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit <f33ce12e9cd9cab7e6022e91d3765c33d99bf777> dropped unused code
but missed one variable.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virNetDaemonQuit(dmn) command in virLXCControllerSignalChildIO triggers an
early close of all clients of lxc_controller. Here, libvirtd itself is a client
of this controller, and the client connection is used to notify libvirtd if a
reboot of the container is required. However, the client connection was closed
before such a status could be sent to libvirtd. To fix this bug, we will
immediately send the reboot or shutdown status of the container to libvirtd,
and only after client disconnect will we trigger virNetDaemonQuit.
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/237
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=991773
Signed-off-by: Joachim Falk <joachim.falk@gmx.de>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The hash table of log file objects in libxlLogger is not protected against
concurrent access. It is possible for one thread to remove an entry while
another is updating it. Add a mutex to the libxlLogger object and lock it
when accessing the files hash table.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
libxl can deliver events and invoke callbacks on any application thread
calling into libxl. This can cause deadlock in the libvirt libxl driver
Thread 19 (Thread 0x7f31411ec700 (LWP 14068) "libvirtd"):
#0 0x00007f318520cc7d in __lll_lock_wait () from /lib64/libpthread.so.0
#1 0x00007f3185205ed5 in pthread_mutex_lock () from /lib64/libpthread.so.0
#2 0x00007f3189488015 in virMutexLock (m=<optimized out>) at ../../src/util/virthread.c:79
#3 0x00007f3189463f3b in virObjectLock (anyobj=<optimized out>) at ../../src/util/virobject.c:433
#4 0x00007f31894f2f41 in virDomainObjListSearchID (payload=0x7f317400a6d0, name=<optimized out>, data=0x7f31411eaeac) at ../../src/conf/virdomainobjlist.c:105
#5 0x00007f3189437ac5 in virHashSearch (ctable=0x7f3124025a30, iter=iter@entry=0x7f31894f2f30 <virDomainObjListSearchID>, data=data@entry=0x7f31411eaeac, name=name@entry=0x0) at ../../src/util/virhash.c:745
#6 0x00007f31894f3919 in virDomainObjListFindByID (doms=0x7f3124025430, id=<optimized out>) at ../../src/conf/virdomainobjlist.c:121
#7 0x00007f3152f292e5 in libxlDomainEventHandler (data=0x7f3124023d80, event=0x7f310c010ae0) at ../../src/libxl/libxl_domain.c:660
#8 0x00007f3152c6ff5d in egc_run_callbacks (egc=egc@entry=0x7f31411eaf50) at libxl_event.c:1427
#9 0x00007f3152c718bd in libxl__egc_cleanup (egc=0x7f31411eaf50) at libxl_event.c:1458
#10 libxl__ao_inprogress (ao=ao@entry=0x7f310c00b8a0, file=file@entry=0x7f3152cce987 "libxl_domain.c", line=line@entry=730, func=func@entry=0x7f3152ccf750 <__func__.22238> "libxl_domain_unpause") at libxl_event.c:2047
#11 0x00007f3152c8c5b8 in libxl_domain_unpause (ctx=0x7f3124015a40, domid=<optimized out>, ao_how=ao_how@entry=0x0) at libxl_domain.c:730
#12 0x00007f3152f2a584 in libxl_domain_unpause_0x041200 (domid=<optimized out>, ctx=<optimized out>) at /usr/include/libxl.h:1756
#13 libxlDomainStart (driver=driver@entry=0x7f3124023d80, vm=vm@entry=0x7f317400a6d0, start_paused=start_paused@entry=false, restore_fd=restore_fd@entry=-1, restore_ver=<optimized out>, restore_ver@entry=2) at ../../src/libxl/libxl_domain.c:1482
#14 0x00007f3152f2a6e3 in libxlDomainStartNew (driver=driver@entry=0x7f3124023d80, vm=vm@entry=0x7f317400a6d0, start_paused=start_paused@entry=false) at ../../src/libxl/libxl_domain.c:1545
#15 0x00007f3152f2a789 in libxlDomainShutdownHandleRestart (driver=0x7f3124023d80, vm=0x7f317400a6d0) at ../../src/libxl/libxl_domain.c:464
#16 0x00007f3152f2a9e4 in libxlDomainShutdownThread (opaque=<optimized out>) at ../../src/libxl/libxl_domain.c:559
#17 0x00007f3189487ee2 in virThreadHelper (data=<optimized out>) at ../../src/util/virthread.c:196
#18 0x00007f3185203539 in start_thread () from /lib64/libpthread.so.0
#19 0x00007f3184f3becf in clone () from /lib64/libc.so.6
Frame 16 runs a thread created to handle domain shutdown processing for
domid 28712. In this case the event contained the reboot reason, so the
old domain is destroyed and a new one is created by libxlDomainStart new.
After starting the domain, it is unpaused by calling libxl_domain_unpause
in frame 12. While the thread is running within libxl, libxl takes the
opportunity to deliver a pending domain shutdown event for unrelated domid
28710. While searching for the associated virDomainObj by ID, a deadlock is
encountered when attempting to lock the virDomainObj for domid 28712, which
is already locked since this thread is processing its shutdown event.
The deadlock can be avoided by moving the search for a virDomainObj
associated with the event domid to the shutdown thread. The same is done
for the death thread.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similar to domain shutdown events, processing domain death events can be a
lengthy process and we don't want to block the event handler while the
operation completes. Move the death handling function to a thread.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current thread name 'ev-<domid>' is a bit terse. Change the name
to 'shutdown-event-<domid>', allowing it to be distinguished between
thread handling other event types.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
An upcoming change will use the struct in a thread created to process
death events. Rename libxlShutdownThreadInfo to libxlEventHandlerThreadInfo
to reflect the more generic usage.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The libxl driver will handle all domain destruction and cleanup
when receiving a domain shutdown event from libxl. Commit fa30ee04a2
introduced the ignoreDeathEvent boolean in the DomainObjPrivate struct
to ignore subsequent death events from libxl. But libxl already provides
a mechanism to disable death events via libxl_evdisable_domain_death.
This patch partially reverts commit fa30ee04a2 and instead uses
libxl_evdisable_domain_death to disable subsequent death events when
processing a shutdown event.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In qemuConnectGetAllDomainStats() there a loop that iterates over
all domains that stats are to be fetched for. Within this loop
the qemuDomainGetStats() is called which is responsible for
fetching stats for an individual domain. Now, the code that
handles successful and failure cases is almost the same. Rework
it, so that the code is deduplicated. Note, that the check for
!tmp is dropped because upon successful return from
qemuDomainGetStats() it is always allocated.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since f29d7c3e69 we have an option for checking capabilities
required for given type of statistics upfront, instead of the
callback. Switch qemuDomainGetStatsIOThread() callback to the new
style.
This will now error out properly if user requests IOTHREAD stats
forcibly (via VIR_CONNECT_GET_ALL_DOMAINS_STATS_ENFORCE_STATS
flag) but QEMU doesn't support IOThreads. Previously, this was
silently ignored.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The idea of queryDirtyRateRequired[] is that it lists QEMU
capabilities required for given domstats record
(VIR_DOMAIN_STATS_DIRTYRATE in this particular case) and
QEMU_CAPS_LAST is used as a sentinel. Therefore, there can never
be anything after it. Drop the comma to make it more obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For some weird reason we are ignoring errors when creating veth
pair that netlink reports. This affects the LXC driver which
creates interfaces for container in
virLXCProcessSetupInterfaces(). If creating a veth pair fails, no
error is reported and the control jumps onto cleanup label where
some cryptic error message is reported instead (something about
inability to remove veth pair).
Let's report error that netlink returned - it's probably the most
accurate reason anyways.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/225
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The generic "rpc-worker" name becomes a name of the associated task,
which may than appear in logs and bring some confusion. Let's add a
server name to it so that one can easily see which daemon the task
belongs to, which is especially useful for split daemons. And since the
name would be too long, we can drop the "-worker" part and just keep it
as "rpc-*" and "prio-rpc-*".
Such confusing entries can, for example, be found in audit log when
SELinux is complaining that "rpc-worker" was denied access to something.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The file used a pretty inconsistent style for formatting function
headers. Return types were both separate and on the same line as
function names and functions were separated by one, two, and sometimes
even three empty lines. Let's make it consistent by honoring our
preferred coding style.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently virThreadPoolNewFull relies on the caller to ensure the job
name outlives the thread pool. Which basically enforces static strings.
Let's drop this implicit requirement by making a copy of the job name.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We pass through to glib's hash table functions so we can also use glibs
function prototype definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use 'g_clear_pointer(&ptr, g_hash_table_unref)' instead.
In few instances it allows us to also remove explicit clearing of
pointers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use separate automatically cleared variables for the x86_64 and s390
versions of the QAPI schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
'blockNamedNodeData' is declared for automatic freeing but we also free
it manually and reuse which is a code pattern we don't normally allow.
Rewrite the code to have actually two separate hash tables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Allocate the hash table only after the log file is opened so that we
don't need to deallocate it on failure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After the conversion to g_autofree, the cleanup label is no longer
needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The function is used also to compare virStorageSource which may not be
resolved to the image at that point in which case the 'path' is not yet
populated and the actual type is not yet set. This means that the
function fails to consider two identical volume-based disks as pointing
to the same thing.
Add a special case for both images being type=volume in which case we
compare only the pool/volume names.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/240
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It makes it easier to see what's going on when trying to figure out why
the disk definition was not updated on a finalized blockjob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In other places we use strspn to validate a character subset. Convert
the in-place loop and simplify the error message.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new STRLIM macro and unify it with the empty string check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As a microoprimization when checking whether length of a string fits
into a limit we don't necessarily need to calculate the full length but
can use strnlen to check only LIMIT+1 chars. Add a macro which will
simplify the expressions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reduce the extent of custom logic and custom error messages by using
virXMLPropTristateBool.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The helpers will update the passed boolean if the tristate's value is
not _ABSENT.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The run script tries to detect when a daemon is being run in order to
shutdown other systemd unit files that clash. As implemented this
only works if the daemon name is the first argument. This won't be the
case if running via GDB or strace eg
./run strace -e trace=openat ./build/src/virtqemud
We need to check all argv to find which might be a daemon path/name.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The domain capabilities won't report TPM support unless SWTPM can be
initialized. To avoid relying on the swtpm install in the host, mock
the entire initialization method, since all it needs todo is return
a non-error value.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reports what TPM features QEMU supports, provided that swtpm is
installed in the host.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This adds reporting of available TPM models and backends to the domain
capabilities schema
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU domain capabilities code wants to quietly know whether swtpm is
available on the host.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Many methods merely want to know that the swtpm binaries have been
found, and don't care about probing for capabilities. Even when
starting a guest, the QEMU driver may not need the capabilities.
Skipping probing ensures the VM startup path is as fast as possible
when capabilities are not required. It also removes various error
scenarios from the main init method.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virTPMEmulatorInit method updates various global variables
and holds a lock while doing so. Other methods which access
these variables, however, don't reliably hold locks over all
of their accesses.
Since virTPMEmulatorInit is no longer exported, we can push
the locking up into all the callers and achieve proper safety
for concurrent usage.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Every other exported API from virtpm.h will internally call
virTPMEmulatorInit, so there is no reason for this initializer
to be exported on its own.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virTPMEmulatorInit function defines a struct that gets filled with
pointers to global variables. It will be simpler to just use the struct
for the global variables directly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The TPM helper methods for querying the binary path and capabilities
have the same patterns across all swtpm binaries. This code duplication
can be reduced by introducing helper methods.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Best practice is to have all types use a naming convention based on the
filename.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
I think it makes more sense for the variable about jobs to be in
the job object. I also renamed it to be consistent with the rest
of the struct.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
To support backwards live migration we must strip the default added
audio element, however, we are too aggressive in doing so. We are only
comparing a couple of attributes for equality, so risk stripping config
that was user customized. To improve this we need to a deep comparison
of the audio config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is useful to be able to deeply check them for equality.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The logic of saving metadata doesn't have to be in endjob section as
it will only happen if we have successfully created snapshot.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is no need for the extra variable as it is used only at one place.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This makes it obvious that the function is called for creating new
snapshot and redefining old snapshot as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainObjExitMonitor is just an alias for it at this point.
This also removes the incomplete ATTRIBUTE_NONNULL(1) annotation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts my
commit dc2fd51fd7
Check for domain liveness in qemuDomainObjExitMonitor
which fixed the symptoms of the bug later fixed by
commit 81f50cb92d
qemu: Avoid calling qemuProcessStop without a job
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the check from conditions where it's coupled with some other
checks.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This wrapper for qemuDomainObjExitMonitorInternal was
extended by my commit dc2fd51fd7
to check whether the domain is still alive, because
we were observing crashes if the QEMU process died
while some of our APIs were in the monitor and the thread
processing the EOF event freed the domain definition.
This bug was fixed by:
commit 81f50cb92d
qemu: Avoid calling qemuProcessStop without a job
but we kept checking for the return value since.
Remove the G_GNUC_WARN_UNUSED_RESULT attribute since
all of the calls that could set def->id to -1 are protected
by qemuProcessBeginStopJob and cannot happen while we have a job
in the monitor.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
macOS on Apple silicon reports 'arm64' as the architecture from uname,
which we need to canonicalize to VIR_ARCH_AARCH64 / 'aarch64'.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The libvirt_recover_xattrs.sh tool hangs when run. When no flags
are provided OPTIND is 1, so the loop expands to 'shift 0' which
has not effect. Rewrite to just loop over $@ instead which involves
less cleverness.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the dissect_xdr_bytes() there's a comment that the string
allocated by xdr_bytes() can't be freed using xdr_free(). Well,
that is expected because xdr_bytes() used plain calloc() AND the
string is not an XDR struct but plain 'char *' type. Passing it
to xdr_free() must result in weird things happening.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When the dissector sees a byte sequence that is either an opaque
data (xdr_opaque) or a byte sequence (xdr_bytes) it formats the
bytes as a hex numbers using our own implementation. But
wireshark already provides a function for it: tvb_bytes_to_str().
NB, the reason why it returns a const string is so that callers
don't try to free it - the string is allocated using an allocator
which will decide when to free it.
The wireshark formatter was introduced in wireshark commit of
v1.99.2~479 and thus is present in the version we require at
least (2.6.0).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Commit 24be92b8e moved the option rom settings validation code to the
validation callbacks, but that doesn't work properly with device hotplug
as we assign addresses only after parsing the whole XML. The check is
too strict for that and caused failures when hotplugging devices such
as:
<interface type='network'>
<source network='default'/>
<model type='virtio'/>
<rom enabled='no'/>
</interface>
This patch relaxes the check in the validation callback to accept also
_NONE and _UNASSIGNED address types and returns the check to
'qemuBuildRomProps' so that we preserve the full validation as we've
used to.
Fixes: 24be92b8e3
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2021437
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit bc24810c2c modified code querying blockstats to use the
'query-nodes' parameter so that we can fetch stats also for images which
are not attached to a frontend such as block copy and backup scratch
images.
Unfortunately that broke the old blockstats because if 'query-nodes' is
enabled qemu doesn't output the 'qdev' parameter which our code used for
matching to the disk and also qemu neglects to populate the frontend
stats at all so we can't even switch to using nodename for matching.
To fix this we need to do two calls, one with 'query-nodes' disabled
using the old logic to populate everything and then an additional one
which populates all the remaining images.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/246
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Erik Skultety <eskultet@redhat.com>
These functions always return success so it seems logical to not
return anything and remove unnecessary checks.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch rewrites the pattern using early return where it is
not needed and changes the return type of the functions to 'void'
if possible.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I have seen this pattern a lot in the project, so I decided to
rewrite code I stumbled upon to the same pattern as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The libxlDomainObjPrivate object is never locked and hence does not need to
be a virObjectLockable object.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I think it makes no sense to have else branches after return or
goto as it will never reach them in cases it should not. This
patch makes the code more readable (at least to me).
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Upon successful return from virDomainObjListAdd() the
virDomainObj is the owner of secret definition. To make this
ownership transfer even more visible, lets pass the definition as
a double pointer and use g_steal_pointer().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Upon successful return from virStoragePoolObjListAdd() the
virStoragePoolObj is the owner of secret definition. To make this
ownership transfer even more visible, lets pass the definition as
a double pointer and use g_steal_pointer().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Upon successful return from virSecretObjListAdd() the
virSecretObj is the owner of secret definition. To make this
ownership transfer even more visible, lets pass the definition as
a double pointer and use g_steal_pointer().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Upon successful return from virInterfaceObjListAssignDef() the
virInterfaceObj is the owner of secret definition. To make this
ownership transfer even more visible, lets pass the definition as
a double pointer and use g_steal_pointer().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The check for whether the swtpm binary was modified is checking pointers
to the mtime field in two distinct structs, so will always compare
different. This resulted in re-probing swtpm capabilities every time,
as many as 20 times for a single VM launch.
Fixes:
commit 01cf7a1bb9
Author: Stefan Berger <stefanb@us.ibm.com>
Date: Thu Jul 25 14:22:04 2019 -0400
tpm: Check whether previously found executables were updated
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When a build fails it is helpful to know what packages were installed,
because by the time we look at the build job output, the original
container image might have changed.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When VIR_EXEC_DAEMON is set, if virPidFileAcquirePath/virSetInherit failed,
then pipesync[0] can not be closed when granchild process exit, because
pipesync[1] still opened in child process. and then saferead in child
process may blocked forever, and left grandchild process in defunct state.
Signed-off-by: Xu Chao <xu.chao6@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The functions have very difficult semantics where callers are not able
to tell whether the property is missing or failed the length check. Only
the latter produces errors.
Since usage of the functions was phased out, remove them completely to
avoid further broken code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function produces an error which is ignored in this code path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virXPathStringLimit doesn't give callers a way to differentiate between
the queried XPath being empty and the length limit being exceeded.
This means that the callers is completely ignoring the error.
Move the length check into the caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Apart from code simplification the refactor of 'model' fixes an unlikely
memory leak of the string if a duplicate model is found.
While the coversion of 'label' variable may seem unnecessary it will
come in handy in the next patch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virXPathStringLimit doesn't give callers a way to differentiate between
the queried XPath being empty and the length limit being exceeded.
This means that callers are either overwriting the error message or
ignoring it altogether.
Move the length checks into the caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virXPathStringLimit doesn't give callers a way to differentiate between
the queried XPath being empty and the length limit being exceeded.
This means that callers are overwriting the error message.
Move the length checks into the caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use separate variables for 'model' and 'relabel' properties.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'seclabel->label', 'seclabel->imagelabel' and 'seclabel->baselabel' are
populated by stealing the pointer from the 'p' temporary string. Remove
the extra step.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the appropriate enum type instead of an int and fix the XML parser
and one missing fully populated switch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The cpuset_getaffinity() function is checked in sys/cpuset.h to see if
BSD CPU affinity APIs are available. This check requires including
sys/param.h to work properly, otherwise the test program fails with
unrelated errors like:
/usr/include/sys/cpuset.h:155:1: error: unknown type name
'__BEGIN_DECLS'
__BEGIN_DECLS
^
/usr/include/sys/cpuset.h:156:12: error: unknown type name 'cpusetid_t';
did you mean 'cpuset_t'?
int cpuset(cpusetid_t *);
and so forth.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch removes variables such as 'ret', 'rc' and others which
are easily replaced. Therefore, making the code look cleaner and
easier to understand.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Both of the current mingw jobs are marked as 'allow_failure' because
they are running against Fedora rawhide which is an unstable distro.
We need at least one mingw job to be gating to more reliably detect
problems.
This introduces dockerfiles for both mingw variants on Fedora 35
and sets the mingw64 build to run on Fedora 34, and mingw32 on
Fedora rawhide.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
- The Cirrus CI variables are now sorted
- The dockerfiles update commands changed for some distros
- Meson in CentOS is now new enough to use
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is a leftover 'ptys' variable, which we only assign
to and one assignment to 'content', where we add an empty
'pty' object.
Remove 'ptys'.
Fixes: 93accefd9e
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristína Hanicová <khanicov@redhat.com>
There is a stray mis-indented 'return NULL' left after a recent
refactor.
Fixes: c18d9e23fa
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristína Hanicová <khanicov@redhat.com>
virHostValidateGetCPUFlags returns an allocated virBitmap and
it needs to be freed.
Fixes: a0ec7165e3
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristína Hanicová <khanicov@redhat.com>
This eliminates one incorrect parsing implementation which relied on the
command field not having a closing bracket. This possibility is already
tested against in the virProcessGetStat() tests.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reads and separates all fields from /proc/<pid>/stat or
/proc/<pid>/task/<tid>/stat as there are easy mistakes to be done in the
implementation. Some tests are added to show it works correctly. No number
parsing is done as it would be unused for most of the fields most, if not all,
of the time. No struct is used for the result as the length can vary (new
fields can be added in the future).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We've changed the behavior of this API that from now on it will always
restart the VM process and we are no longer able to revert to snapshots
created by libvirt older then 0.9.5.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Recent cleanup of snapshot revert code made these function unused.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It does not need a tty to work, it opens its controlling terminal for user
interaction and with this patch even crazy things like this work:
echo 'list --name' | virsh -q >/dev/null
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Trying to connect once without a polkit agent will generate an error on the
server side which seems too rough given it only serves the purpose of the client
(virsh in this case) to figure out that an agent is needed. Thankfully we can
just try running the agent. It does not break anything as we are running it
with `--fallback`, which makes sure it does not replace an existing agent in
case there is one already registered.
The second piece of code trying to start the polkit text agent is kept in order
to _really_ try out starting the agent (and error out when failing to do so)
just in case the agent was not available the first time it was ran. Even though
it should not happen it avoids a very rare race condition and really does not
add much complexity.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1945501
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With this function we can decide whether to try running the polkit text agent
only if it is available, removing a potential needless error saying that the
agent binary does not exist, which is useful especially when running the agent
before knowing whether it is going to be needed.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Automatic "Ptr " -> " *" also wreaked havoc in comments. Fix it and while at it
reword the sentence so it is clear that the object is newly allocated.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It only redundantly reflects whether pkagent != NULL.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We've changed the behavior of this API that from now on it will always
restart the VM process and we are no longer able to revert to snapshots
created by libvirt older then 0.9.5.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This will always happen so there is no need to error out and require
usage of FORCE flag.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that we always emulate restarting the VM process events are emitted
differently so we need to update the code and the comment as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that we always emulate VM process stop we can drop the unused code
and simply the logic.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reflect the same change in test driver as in QEMU driver because the
compatibility check code isn't perfect.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When active snapshot is reverted we stop CPUs in order to load the
snapshot but we never start the CPUs again.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We should have this check even if FORCE flag is used because later we
unconditionally copy the `snap->def->dom` and error out if there is no
copy created. The test driver will always save the VM XML when creating
new snapshot.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This will always happen so there is no need to error out and require
usage of FORCE flag.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that we always restart the QEMU process events are emitted
differently so we need to update the code and the comment as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that we always restart QEMU process the loadvm code is unused and
can be dropped.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Our compatibility check code isn't complete and there are cases where it
fails to detect incompatible configuration and the revert fails. In
addition future support for external snapshot will always require
restarting the QEMU process.
To unify the behavior drop the compatibility check code and always
restart the QEMU process.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The support to revert snapshots was introduced in libvirt 0.8.0 but
saving the whole VM XML was implemented later in libvirt 0.9.5.
That is more then 10 years ago so we can safely assume that nobody will
try reverting to snapshot created by that old libvirt. In the unlikely
scenario where someone would actually did it we would simply error out.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Git bisect took me to commit where incorrect usage of ATTRIBUTE_NONNULL
was introduced and caused coverity scan to fail. This patch fixes the
issue where the index starts from 1 and not 0 and two other different
cases.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We currently use -machine accel=XXX which is just a syntax sugar
for -accel XXX. The former doesn't allow specifying arguments for
accelerator, because all arguments passed to -machine are
treated as arguments of machine itself.
The -accel argument was introduced in QEMU commit
v2.9.0-rc0~70^2~19 and since our minimum required version is
newer (2.11.0) we can safely assume its existence and use it
without any capability.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/233
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The domain accelerator was validated in qemuValidateDomainDef()
which calls virQEMUCapsIsVirtTypeSupported() which reports proper
error if QEMU is not capable of KVM/TCG. There is no point in
doing the validation again when building command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use 'virJSONValueObjectAdd' instead of the step-by-step manual JSON
object building.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When formatting the commandline we explicitly set the reconnect timeout
to 0 when it's disabled even when that's the default. Do the same in
the monitor/hotplug code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename 'data' to 'backendData' so that it's more clear what the object
represents and 'backend_type' to 'backendType' to go with the common
camel case notation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In some cases we have a label that contains nothing but a return
statement. The amount of such labels rises as we use automagic
cleanup. Anyway, such labels are pointless and can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When guest has NUMA nodes and QEMU is new enough to report
default RAM ID then ideally we would use -numa memdev= combined
with memory-backend-* combo becasue -mem-path/-mem-prealloc/-numa
mem are deprecated. Well, there is one problem - the .memdev=
attribute is machine type dependent (just look at arguments of
virQEMUCapsGetMachineNumaMemSupported()) and to ensure backwards
compatibility we prefer -numa mem= over -numa memdev=.
But there was one corner case when -mem-prealloc was requested
but not generated on the cmd line. It all starts with
qemuBuildMemCommandLine() which generates just '-m XXX' and
because it sees defaultRAMid and guest NUMA nodes greater than
zero it does nothing more.
Then, qemuBuildNumaCommandLine() sees that -numa mem= is still
supported for given machine type and nothing else set
@needBackend thus qemuBuildMemPathStr() is called which output
-mem-prealloc only in a few cases assuming it was outputted
earlier.
Reported-by: Jing Qi <jinqi@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This test shows a bug we have: even though the XML says:
<allocation mode='immediate'/>
there is no -mem-prealloc nor .prealloc=yes anywhere on the cmd
line. This will be fixed in the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Create extra g_autofree strings and use them in an adequate scope to
eliminate the need for VIR_FREE() calls and the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
ppc64Compute() is used only once, by virCPUppc64Compare(), which
doesn't use the 'guest' parameter. It was last used by an API
called 'cpuGuestData' that was dropped by commit 03fa904c0c.
Removing the 'guest' parameter will not only remove unused code from
ppc64Compute() but also remove the ppc64MakeCPUData() entirely.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
'str' is no longer being used and the 'cleanup' label can be removed
together with the 'ret' variable.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Create a new helper to remove the arch validation logic from the
body of virQEMUCapsLoadCache().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Create a new helper to remove the emulator validation logic from the
body of virQEMUCapsLoadCache().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Create a new helper to remove the GIC parse logic from the body of
virQEMUCapsLoadCache().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Create a new helper to remove the parse capabilities flag logic from the
body of virQEMUCapsLoadCache().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The content of /sys/module/kvm_amd/parameters/sev may vary depending on
the kernel version. Check also for 'Y' and 'y' in addition to '1' to
cover several possible variants. The fix is similar to the one
introduced in commit 3f9c1a4bb8
Signed-off-by: Vasiliy Ulyanov <vulyanov@suse.de>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally the default encryption engine is populated in the disk
post-parse callback code. This works for disks but for any additional
images introduced either via the block copy API or via the backup API we
don't populate the default.
In case when the backup or block copy is requested on an encrypted image
this would then lead to an error:
error: internal error: Unexpected enum value 0 for virStorageEncryptionEngine
This patch adds another point where we populate the default which is
when setting up a virStorageSource for actual usage.
We keep the original setting in the post-parse callback as that's the
only point that is recorded in the XML file after definition.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2023674
Fixes: ab1d46d612
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a test case where 'ramfb' is explicitly disabled for a mediated
device to prevent regressing again.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Before commit 73c352ab8c which converted the hostdev commandline
formatter to JSON the 'ramfb' property was formatted only if it was
enabled.
The main reason for that is that enabling 'ramfb' switches the device
model to 'vfio-pci-nohotplug' which actually has the property, while
'vfio-pci' (used when 'ramfb' is disabled or absent) doesn't have it.
Restore the logic to format 'ramfb' only when it's enabled and add a
comment that it's deliberate.
Fixes: 73c352ab8c
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2024435
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test filled the chardev type to VIR_DOMAIN_CHR_TYPE_FILE and thus
set the 'data.emulator.source->data.file.path' pointer, but the
commandline formatter is unconditionally expecting VIR_DOMAIN_CHR_TYPE_UNIX
and thus reading 'data.emulator.source->data.nix.path'. Since it's an
union it happened to land in the correct place. Fix the faked data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainChrSourceDef' contains private data so 'virDomainChrSourceDefNew'
must be used to allocate it. 'virDomainTPMDef' was using it directly
which won't work with the chardev helper functions.
Convert it to a pointer to properly allocate private data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's referenced only once and it's a shortcut to the chardev source thus
can be used directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than returning a different error code if the device address needs
to be released pass in the 'need_release' flag via a pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is already getting 'virDomainObj' which has already the
driver pointer present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch to automatic memory clearing for the two virJSONValues and remove
the 'cleanup' label and 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The main reason is to ensure that the private data are properly
allocated for every instance.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is already returning JSON properties, rename it
accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'virReportEnumRangeError' for the invalid cases and keep the
original error for known but unsupported chardevs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the addition of the command wrapper to qemuMonitorJSONAttachCharDev
and rename the function to qemuMonitorJSONAttachCharDevGetProps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'qemuMonitorJSONMakeCommandInternal' instead of
'qemuMonitorJSONMakeCommand' + 'virJSONValueObjectAppend'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a simple wrapper for 'qemuMonitorAttachCharDev' named
'qemuHotplugChardevAttach' which will simplify the moving of the
character device property generator out of the monitor code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'xmlopt' parameter can be auto-unref by using g_autoptr().
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This will enable code cleanups on code that still relies on
virObjectUnref() this pointer manually.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
x86Compute() is a static function called only by virCPUx86Compare()
which passes NULL to the 'guest' parameter of x86Compute().
The last caller of x86Compute() that used it with 'guest' != NULL
was an API called 'cpuGuestData'. This API was dropped by commit
03fa904c0c a few years ago. Since then all callers of x86Compute()
uses it with 'guest' = NULL.
Removing the 'guest' parameter allow us to remove a good chunk of
logic that isn't being used for awhile.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is no guarantee that QEMU and libvirt have been configured
with the same prefix.
In particular, Homebrew on macOS will pass a different, private
prefix for each package version and then use symlinks to make
the files for a specific version appear in the usual locations.
This works perfectly fine as long as one package doesn't try to
go poking around another package's data - which is exactly what
libvirt needs to do in order to read and parse the QEMU interop
data.
qemu_datadir can now be explicitly provided to make this and
other uncommon scenarios work. The common scenario, where QEMU
and libvirt both use the same prefix, is unaffected.
https://gitlab.com/libvirt/libvirt/-/issues/168
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use abstract names that more closely match the Meson
nomenclature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While datadir must live under prefix, there is no requirement
that its name must necessarily be "share": a different,
arbitrary name could have been provided by the user.
Fixes: 3c876d2428
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can't hardcode /usr here, because the user might have
configured whatever arbitrary prefix.
Everything appeared to be okay because when joining paths
Meson will drop any component that precedes an absolute path
and libdir happens to be absolute, but we should still do
things correctly instead of relying on this.
Fixes: 2ad009eadd
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The directory is already created by the build system, so we
don't need to create it explicitly in the spec file; moreover,
the path was incorrect, because it used datadir instead of
localstatedir.
Fixes: 4e041189f8
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 65b0b746b5 changed spice tests to use latest caps. Before this
change, "FLAG_REAL_CAPS" wasn't being set in testQemuInfoInitArgs(). The
absence of this flag triggered the code path inside
testCompareXMLToArgv() that executed testUpdateQEMUCaps(). This function
will update the host CPU via virQEMUCapsUpdateHostCPUModel() into
virQEMUCapsInitHostCPUModel(). In this function,
virQEMUCapsInitCPUModel() would end up updating the hostCPU inside the
qemuCaps (via virQEMUCapsProbeHostCPU()). Before the forementioned
commit, the host CPU was being defaulted to x86_64, vendor Intel, for
the 'graphics-spice-timeout' test that is using the 'pc' machine type
and 'accel=kvm'.
Today, "FLAG_REAL_CAPS" is being set because we're using the latest caps
from x86_64. This means that the whole code path mentioned above is
skipped. qemuCaps are now being loaded via virQEMUCapsLoadCache()
directly. Without the handling being done by testUpdateQEMUCaps(), the
host CPU is being retrieved later on, down below
qemuProcessCreatePretendCmdPrepare() into qemuProcessUpdateGuestCPU().
The latter will attempt to update the domain cpu and executing a
virCPUCompare with the hostCPU and def->cpu.
All this logic ended up causing a failure of the
'graphics-spice-timeout' test in ppc64 and s390x hosts. This test is
being run with KVM acceleration, and the KVM driver for ppc64 and s390x
will return a default x86_64 CPU with vendor "AMD", making
virCPUCompare() fail with the following message:
"QEMU XML-2-ARGV graphics-spice-timeout.x86_64-latest ... libvirt: CPU
Driver error : the CPU is incompatible with host CPU: host CPU vendor does
not match required CPU vendor Intel"
Fix this test by setting cpu check='none' and avoid the virCPUCompare()
that causes the problem for ppc64 and s390x hosts.
Note that this is a build fix. A more adequate fix would be to mock the
getHost() interface of the cpuDriverX86 for non-x86 hosts, allowing
'fullCPU' to be retrieved in qemuProcessUpdateGuestCPU(), and a proper
x86 CPU to be retrieved in the scenario described above.
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We've been using the new repositories for a few months now,
but the downloads page still points to the obsolete Go packages.
Fixes: 1832c0a02b
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'-audiodev' as a modern implementation based on QAPI already takes JSON
as the argument. Convert our code to use it directly.
The declaration of the QAPI types can be found in
'qemu.git/qapi/audio.json'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The functions were obsoleted by virJSONValueObjectAdd(VArgs)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcomming patch will convert virJSONValueObjectCreate which didn't check
the value of the passed argument to virJSONValueObjectAdd which will and
this would lead to crashes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Until now the code would crash if virJSONValueObjectAdd is used without
a valid object. Adding the functionality of allocating it if it's NULL
will allow us to replace all uses of virJSONValueObjectCreate with this
single function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass in the double pointer from the wrappers directly to
virJSONValueObjectAddVArgs, which will allow us to directly allocate the
new objects inside the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the first argument to a double pointer so that later the function
can be unified with virJSONValueObjectCreate and fix all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 3210c8b04 introduced a separate field 'diskbus' for
internal use by the commandline formatter.
Adjust the check for address equality to compare the relevant
fields separately instead of the whole struct.
This means that the changes of the 'diskbus' field added
in commit 03ed14d2d4 no longer affect the outcome of the address
equality check.
https://bugzilla.redhat.com/show_bug.cgi?id=2023605
Fixes: 3210c8b047
Fixes: 03ed14d2d4
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The upcoming QEMU 6.2.0 implements a new event called
DEVICE_UNPLUG_GUEST_ERROR, a new event that reports generic device
unplug errors that were detected by the guest and reported back to QEMU.
This new event is going to be specially useful for pseries guests that
uses newer kernels (must have kernel commit 29c9a2699e71), which is the
case for Fedora 34 at this moment. These guests have the capability of
reporting CPU removal errors back to QEMU which, starting in 6.2.0, will
emit the DEVICE_UNPLUG_GUEST_ERROR event. Libvirt can use this event to
abort the device removal immediately instead of waiting for 'setvcpus'
timeout.
QEMU 6.2.0 is also going to emit DEVICE_UNPLUG_GUEST_ERROR for memory
hotunplug errors, both in pseries and ACPI guests. QEMU 6.1.0 reports
memory removal errors using the MEM_UNPLUG_ERROR event, which is going to
be deprecated by DEVICE_UNPLUG_GUEST_ERROR in 6.2.0. Given that
Libvirt wasn't handling the MEM_UNPLUG_ERROR event we don't need to
worry about it - adding support to DEVICE_UNPLUG_GUEST_ERROR will be
enough to cover all future cases.
This patch adds support to DEVICE_UNPLUG_GUEST_ERROR by adding the
minimal wiring required for Libvirt to be aware of it. The monitor
callback for this event will abort the pending removal operation of the
device reported by the "device" property of the event. Most of the heavy
lifting is already done by existing code that handles
QEMU_DOMAIN_UNPLUGGING_DEVICE_STATUS_GUEST_REJECTED, making our life
easier to abort the pending removal operation.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch updates domaincapsdata and qemucapabilitiesdata for ppc64
with qemu commit v6.1.0-1714-gc5b2f55981.
Changes in all 'ppc64-latest.ags' files were needed. The changes are
mundane despite the volume. For all 'ppc64-latest.args' files the
changes are:
- removing '-sandbox' command line;
- 'secret' and 'memory-backend-ram' objects are now using qom-type format;
- '-device' is now using qom-type format.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In a few cases we call a public API, wrapped in an if() statement
with both branches written out explicitly. The error branch jumps
onto cleanup label, while the successful prints out a message.
Right after these ifs there's 'ret = true;' and the cleanup
label. The code is a bit more readable if only the error branch
is kept and printing happens at the same level as setting the ret
variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristína Hanicová <khanicov@redhat.com>
Currently, the dommigrate example returns 0 or 1 for success or
failure state, respectively. Except for a few cases where it
forgot to change the @ret variable just before jumping onto the
'cleanup' label. Making the code follow our usual pattern
(initialize @ret to an error value and set it to success value
only at the end) fixes those cases. Also, using EXIT_SUCCESS and
EXIT_FAILURE is more portable (even though on my system they are
just an alias to values the example already uses).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristína Hanicová <khanicov@redhat.com>
The usage() function should just print expected arguments. Make
the function return void then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristína Hanicová <khanicov@redhat.com>
Similarly to one of previous commits, there's no need to
increment domain object refcounter before unlocking it. Any
number of lock and unlock calls over domain object has no effect
on the refcounter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanups this callback is unused. Remove it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, when opening an agent socket the qemuConnectAgent()
increments domain object refcounter and calls qemuAgentOpen()
where the domain object pointer is simply stored inside
_qemuAgent struct. If qemuAgentOpen() fails, then it clears @cb
member only to avoid qemuProcessHandleAgentDestroy() being called
(which decrements the domain object refcounter) and the domain
object refcounter is then decreased explicitly in
qemuConnectAgent().
The same result can be achieved with much cleaner code: increment
the refcounter inside qemuAgentOpen() and drop the dance around
@cb.
Also, the comment in qemuConnectAgent() about holding an extra
reference is not correct. The thread that called
qemuConnectAgent() already holds a reference to the domain
object. No matter how many time the object is locked and unlocked
the reference counter can't be decreased.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Just like qemuMonitorOpen(), hold the domain object locked
throughout the whole time of qemuConnectAgent() and unlock it
only for a brief time of actual connect() (because this is the
only part that has a potential of blocking).
The reason is that qemuAgentOpen() does access domain object
(well, its privateData) AND also at least one argument (@context)
depends on domain object. Accessing these without the lock is
potentially dangerous.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1845468#c12
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To make it easier for users to figure out how the DN should be formatted.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
With this program we do not have to depend on the output of `certtool -i`, which
changed the order of the fields at some point and the newest version is
incompatible with what libvirt expects in tls_allowed_dn_list configuration
option.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This removes a dead link, the need for users to understand a glib function and a
improper reference to fnmatch (as we only expand asterisks to any string).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
And to make that easier, allocate it on the heap.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This commit doesn't aim to extinguish every VIR_FREE() call, but
only those which were touched by the previous commit. The aim is
to drop cleanup/error labels.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Instead of calling qemuMonitorTestFree() explicitly, we can use
g_autoptr() and let it be called automagically.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Previous commit rendered 'cleanup' label and @ret variable
redundant. The same result can be achieved by returning 0/-1
directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There are two instances of an explicit call to
qemuMonitorCPUModelInfoFree() which in fact can be turned into
g_auto().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There are a few cases where a string list is freed by an explicit
call of g_strfreev(), but the same result can be achieved by
g_atuo(GStrv).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There are two functions (testQemuAgentOSInfo() and
testQemuAgentTimezone()) which call virTypedParamsFree() only in
successful paths. If an error is met then those parameters would
be leaked. Fix this by placing the virTypedParamsFree() calls on
better place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Instead of explicit virObjectUnlock(obj) + virObjectUnref(obj)
combo the virSecretObjEndAPI() can be used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Instead of explicit virObjectUnlock(obj) + virObjectUnref(obj)
combo the virNodeDeviceObjEndAPI() can be used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Instead of explicit virObjectUnlock(obj) + virObjectUnref(obj)
combo the virNWFilterBindingObjEndAPI() can be used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Instead of explicit virObjectUnlock(obj) + virObjectUnref(obj)
combo the virInterfaceObjEndAPI() can be used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Instead of explicit virObjectUnlock(obj) + virObjectUnref(obj)
combo the virDomainObjEndAPI() can be used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Found via valgrind
==15016== 3,701 bytes in 2 blocks are definitely lost in loss record 975 of 1,009
==15016== at 0x4C2A2AF: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==15016== by 0x1FCD30CB: libxl_read_file_contents (in /usr/lib64/libxenlight.so.4.12.0)
==15016== by 0x1FCCA58A: ??? (in /usr/lib64/libxenlight.so.4.12.0)
==15016== by 0x1FCCA6C2: libxl_userdata_retrieve (in /usr/lib64/libxenlight.so.4.12.0)
==15016== by 0x1FA42A5A: libxlReconnectDomain (libxl_driver.c:394)
==15016== by 0x53BAC99: virDomainObjListHelper (virdomainobjlist.c:802)
==15016== by 0x530842F: virHashForEach (virhash.c:575)
==15016== by 0x53BC0E0: virDomainObjListForEach (virdomainobjlist.c:817)
==15016== by 0x1FA423C4: libxlReconnectDomains (libxl_driver.c:468)
==15016== by 0x1FA423C4: libxlStateInitialize (libxl_driver.c:778)
==15016== by 0x54E8E9E: virStateInitialize (libvirt.c:657)
==15016== by 0x12DBFA: daemonRunStateInit (remote_daemon.c:797)
==15016== by 0x535BF79: virThreadHelper (virthread.c:206)
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
During the vm rebooting, the vm could be paused if the libvirtd is
restarted for some reason, which is not expected. We need continue
fakereboot process if fakereboot flags is true and the vm is in
paused-user status.
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
During the vm rebooting, the vm could be shut down if the libvirtd is
restarted for some reason, which is not expected. We move set
fakereboot flags false after processing fakereboot over, so we can
ensure that fakereboot process have been executed.
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch improves readability of the function and makes the
code look cleaner by removing the 'else' branches after return
and reordering of the 'if' branches.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 88957116c9 switched to use
memory-backend-* for regular VM memory as well. That change indirectly
started using 'host-nodes' for system memory which results in QEMU
calling mbind() to bind the system memory to specific NUMA node if the
VM XML contains the configuration similar to this:
...
<numatune>
<memory mode='strict' nodeset='0'/>
</numatune>
...
Once the VM was started with that configuration it was no longer
possible to change the memory NUMA nodeset.
Fixes: 677c90cc1d
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This should make the documentation less confusing mainly for
Ceph people.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove unnecessary label and goto. This also fixes a bug where a
failure to create the table would result in the test passing.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove unnecessary label and goto. Cleanup line breaks.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove unnecessary label, goto, and closing of not-open file descriptor.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some forward declarations in bridge_driver.c are not needed
really. They only create a noise when trying to jump onto the
correct tag. Drop them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Many things can affect the availability of cpu flags (e.g. software
upgrades, kernel versions, kernel command line, etc.) and invalidate the
cached capabilities without notice. Add CPUID information to the
capabilities cache.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This makes it possible to call virCPUDataParse with a xmlNodePtr,
which will be required by a later patch.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function does not need a full xmlXPathContextPtr any longer and a
later patch will require a call to this function with only a xmlNodePtr
available.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Factor out duplicated code from x86FeatureParse and virCPUx86DataParse.
This also consolidates error messages.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
... by using virXMLProp*() helpers. These only require a xmlNodePtr and
do not need a xmlXPathContextPtr. Reflect that in the function signature.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
... by using virXMLProp*() helpers. These only require a xmlNodePtr and
do not need a xmlXPathContextPtr. Reflect that in the function signature.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When I was cleaning up the regex after we removed most of our custom
autofree helpers I've forgot to delete one closing brace, thus the regex
was not matching anything.
Fixes: 65f702020e
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If there is no tcp_min_ssf value set in daemon config we still
compare it against the default (56 which corresponds to DES) and
if the value is below our expected minimum (112 which corresponds
to 3DES) an error is reported and the daemon refuses to start.
This is not what we want. What we want is to check the value iff
the value was specified in the config file.
Fixes: 58a48cff84
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
1) 'activePcrBanksStr' is not initialized:
../../../libvirt/src/qemu/qemu_tpm.c: In function ‘qemuExtTPMStart’:
/usr/include/glib-2.0/glib/glib-autocleanups.h:28:3: error: ‘activePcrBanksStr’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
28 | g_free (*pp);
| ^~~~~~~~~~~~
../../../libvirt/src/qemu/qemu_tpm.c:613:22: note: ‘activePcrBanksStr’ was declared here
613 | g_autofree char *activePcrBanksStr;
| ^~~~~~~~~~~~~~~~~
2) 'pwdfile_fd' is unused:
../../../libvirt/src/qemu/qemu_tpm.c:615:19: error: unused variable 'pwdfile_fd' [-Werror,-Wunused-variable]
VIR_AUTOCLOSE pwdfile_fd = -1;
Fixes: a5bbe1a8b6
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
It won't cause any harm as cpus is NULL when we pass a negative ncpus,
but doing so when the function expects unsigned value is not right.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The return value was not properly checked in the code for input type
evdev.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend the TPM backend XML with a node 'active_pcr_banks' that allows a
user to specify the PCR banks to activate before starting a VM. Valid
choices for PCR banks are sha1, sha256, sha384 and sha512. When the XML
node is provided, the set of active PCR banks is 'enforced' by running
swtpm_setup before every start of the VM. The activation requires that
swtpm_setup v0.7 or later is installed and may not have any effect
otherwise.
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'>
<active_pcr_banks>
<sha256/>
<sha384/>
</active_pcr_banks>
</backend>
</tpm>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2016599
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
At this point, we're no longer using the availability of the
ZFS programs at build time to decide whether to enable ZFS
support, so the only purpose of these find_program() calls is
to record their absolute paths.
However, the virCommand facilities that we're ultimately using
to run them are already capable of performing this lookup at
runtime, and in fact that's exactly what we already do in the
case of, for example, vstorage.
Drop the build time lookups and always perform them at runtime.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Commit 73a2ff3616 already improved the situation a lot. This
pushes things even further.
If the user or, more likely, the distro packager explicitly
asked for ZFS support to be enabled, then we should comply with
that request regardless of whether the necessary programs are
available at build time.
This is particularly important in the context of Debian, where
ZFS cannot be a build dependency of libvirt due to licensing
issues but it can still be an optional runtime dependency.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Add an option to allow the admin to requet a higher minimum SSF
for connections than the built-in default.
The current default is 56 (single DES equivalent, to support
old kerberos) and will be raised to 112 in the future.
https://bugzilla.redhat.com/show_bug.cgi?id=1431589
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Store the minimum SSF value for TCP connections
in virNetSASLContext and introduce a getter for it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Prepare for deprecating old kerberos ciphers by warning users
with a SSF lower than 112.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The presence of this capability depends on QEMU being compiled
with spice that has the SPICE_ADDR_FLAG_UNIX_ONLY constant.
It was added by spice commit 5365caeaae released in spice v0.12.6,
which is older than the spice version on our supported architectures.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For later QEMUs than 2.11 we do FD passing for character devices,
so lock the capabilites to this exact version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add stat entries also for the mirror destination and the backup job
scratch/target file. This is possible with '-blockdev' as we use unique
index for the entries.
The stats are reported when the VIR_CONNECT_GET_ALL_DOMAINS_STATS_BACKING
is used.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2017928
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the 'query-nodes' flag to return all stats. The flag was introduced
prior to qemu-2.11 so we can always use it, but we invoke it only when
querying stats. The other invocation is used for detecting the nodenames
which is fragile code.
The images without a frontend don't have the device field so the
extraction code checks need to be relaxed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The formatter for the backup job data didn't pass the virDomainXMLOption
struct to the disk formatter which meant that the private data of the
disk source were not formatted.
This didn't pose a problem for now as the blockjob list remembered the
nodenames for the jobs, but the backup source lost them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Presumably the result of a copy/paste mistake, the the argument for the
`nodedev-start` command was described as a 'network' rather than a
'device'.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
While being great semantic patching tool, coccinelle fails to
understand some of macros we use (including those provided by
glib). What they have in common is use of __attribute__ under the
hood. We store a list of such macros in a file. But in there,
g_auto() macro is not defined properly. Indeed, g_auto(type)
declares a local variable of given type, for instance from
cocci's POV:
g_auto(virBuffer) buf = VIR_BUFFER_INITIALIZER;
virBuffer buf = VIR_BUFFER_INITIALIZER;
are both the same declaration. Fix declaration of g_auto() stub.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
For statically declared arrays one can use G_N_ELEMENTS() instead
of explicit sizeof(array) / sizeof(item). I've noticed couple of
places where the latter was used.
I am not fixing every occurrence because we have some places
which do not use glib (examples and NSS module).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
In testPCIVPDResourceCustomCompareIndex() there are two variables
declared at one line. They are both g_autoptr() decorated which
makes it worse, because coccinelle fails to parse that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
I've noticed one function inside virpcivpd.c, namely
virPCIVPDParseVPDLargeResourceFields() that declares some
variables at the top level even though they are used only inside
a loop in which they have to be freed explicitly.
Bringing variable declarations into the loop allows us to make
the code nicer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
I've noticed three functions inside node_device_conf.c, namely:
- virNodeDeviceCapVPDParseCustomFields()
- virNodeDeviceCapVPDParseReadOnlyFields()
- virNodeDeviceCapVPDParseXML()
that have strange attitude towards g_auto* variables. The first
problem is that variables are declared at the top level despite
being used inside a loop. The second problem is use of g_free()
in combination with g_steal_pointer() even though we have
VIR_FREE() which does exactly that.
Bringing variable declarations into their respective loops allows
us to make the code nicer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The first part of the version string contains the name that the
rst2html5 command was invoked as, which can differ based on the
operating system: on FreeBSD, for example, it's rst2html5.py
instead of just rst2html5.
Fix our detection logic so that it works regardless of the
specific name used for the docutils-provided rst2html5 command.
Fixes: cf0c9e1865
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This warning is emitted for pretty much every test case,
making it hard to see what the actual error is.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The test case should return -1, not 0 in case a valid resource could
not be parsed successfully but the ret value is initialized to 0.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
While invalid values need to be ignored when presenting VPD data to the
user, it would be good to attempt to parse a valid portion of the VPD
instead of marking it invalid as a whole.
Based on a mailing list discussion, the set of accepted characters is
extended to the set of printable ASCII characters.
https://listman.redhat.com/archives/libvir-list/2021-October/msg01043.html
The particular example encountered on real hardware was multi-faceted:
* "N/A" strings present in read-only fields. This would not be a useful
valid value for a field (especially if a unique serial number is
expected), however, it was decided to delegate handling of those kinds
of values to higher-level software;
* "4W/1W PCIeG2x4" - looks like some vendors use even more printable
characters in the ASCII range than we currently allow. Since the
PCI/PCIe VPD specs mention alphanumeric characters without specifying
the full character set, it looks like this is ambiguous for vendors
and they tend to use printable ASCII characters;
* 0xFF bytes present in VPD-W field values. Those bytes do not map to
printable ASCII code points and were probably used by the vendor as
placeholders. Ignoring the whole VPD because of that would be too
strict.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
* RV and RW fields must be at the last position in their respective
section (per the conditions in the spec). Therefore, the parser now
stops iterating over fields as soon as it encounters one of those
fields and checks whether the end of the resource has been reached;
* The lack of the RW field is not treated as a parsing error since we
can still extract valid data even though this is a PCI/PCIe VPD spec
violation;
* Individual fields must have a valid length - the parser needs to check
for invalid length values that violate boundary conditions of the
resource.
* A zero-length field may be the last one in the resource, however, the
boundary check is currently too strict to allow that.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
There are a lot of places where we call virInterfaceDefFree()
explicitly. We can define autoptr cleanup macro and annotate
declarations with g_autoptr() and remove plenty of those explicit
free calls.
This also fixes a memory leak in udevInterfaceGetXMLDesc() which
called virInterfaceDefFree() only in successful path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Move the code that adds encryption options for the swtpm_setup command
line into its own function.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since b2757b697e
(qemu: support kvm-pv-ipi off), libvirt supports xml definition like:
<features>
<kvm>
<pv-ipi state='off'/>
</kvm>
</features>
Add test case for this feature.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
KVM features off test cases should be tested for a KVM domain, so
keep align kvm-features-off test with kvm-features except KVM
features on/off.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Starting from QEMU-6.2 enum members can be deprecated. Add support to
the validator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the function to the top of the file so other functions placed
towards the top will be able to reuse it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch to the new more featured way to report enum members which will
also allow us to detect use of deprecated members.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU-6.2 is reporting enum values in the new 'members' array which we'll
be switching to. Rewrite the logic so that adding the new checker is
more straightforward.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU-6.2 added feature flags for enum types. Add support for querying
them into our QMP schema query language.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting from QEMU-6.2 enum members are reported as an array of objects
under new name "values" so that extra data can be reported for each
member.
Modify the code so that we prefer 'members' and skip 'values' completely
if we've used 'members'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to v6.1.0-1735-gc52d69e7db which has Markus' patches for
improvements of enum probing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When you set metadata with type element like the following:
dom.setMetadata(libvirt.VIR_DOMAIN_METADATA_ELEMENT, "<test/>", 'abc', "HAHAH", 0)
Then for `virsh event --all`, then it will output this message:
event 'metadata-change' for domain 'rhel9': element HAHAH
The message is ambiguous since it looks like the params for
metadata-change event is the element HAHAH. Actually that means the type is
element while the url is HAHAH. Let's make it more clear.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The QMP implementation didn't use any new approach. The command itself
is now only used with legacy qemu versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Report an error if the new hotplug is not supported and remove the
alternate code paths.
The modern cpu-hotplug code was introduced in qemu-2.7. We keep the
capability so that proper errors are reported in case a platform doesn't
support hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modern cpu hotplug was introduced in qemu-2.7, thus all qemu versions
actually support it. Remove the tests for the legacy hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Open code virHashAddEntry so that the error code path can be avoided.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virCapabilitiesAddGuestDomain() function can't fail. It
aborts on OOM. Therefore, there's no need to check for its
return value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virCapabilitiesAddGuest() function can't fail. It aborts on
OOM. Therefore, there's no need to check for its return value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In ch_driver.c there are two forward declarations that are not
needed. Drop them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For other interface type, values in tc rules are calculated by
multiply by 8*1000 instead of 8*1024.
Signed-off-by: zhangjl02 <zhangjl02@inspur.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When 'swtpm_setup --print-capabilities' shows the 'tpm12-not-need-root'
flag, then it is possible to create certificates for the TPM 1.2 also
in non-privileged mode since swtpm_setup doesn't need tcsd anymore.
Check for this flag and create the certificates if this flag is found.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU version 3.1 introduced PV_SEND_IPI CPUID feature bit under
commit 7f710c32bb8 (target-i386: adds PV_SEND_IPI CPUID feature bit).
This patch adds a new KVM feature 'pv-ipi' to disable this feature
(enabled by default). Newer CPU platform (Ex, AMD Zen2) supports
hardware accelation for IPI in guest, to use this feature to get
better performance in some scenarios. Detailed about the discussion:
https://lkml.org/lkml/2021/10/20/423
To disable kvm-pv-ipi and have libvirt add "-cpu host,kvm-pv-ipi=off"
to the QEMU command line, the following XML code needs to be added to the
guest's domain description:
<features>
<kvm>
<pv-ipi state='off'/>
</kvm>
</features>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This section of code was left unused ever since it was introduced
ten years ago. I think we can safely remove it.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two bugs I fixed worth mentioning in the 7.9.0 release
notes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
It may happen that qemuProcessStop() is called from "qemu-event"
thread. But this thread doesn't have any virIdentity set
(virIdentity being thread local) and therefore it may be unable
to open connection to secondary drivers. It is unable to do so
in split daemon scenario, because in there opening a connection
is coupled with copying current thread identity onto the
connection. Code-wise, virIdentityGetCurrent() returns NULL which
in turn makes virGetConnectGeneric() fail. This problem does not
occur in monolithic daemon scenario, because no identity copying
is done there.
Long story short, inability to open secondary driver connection
can lead to unwanted results. Therefore, do what
qemuProcessReconnectHelper() does - set the new thread identity
to be the one of the caller.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2013573
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In some cases the worker func running inside the pool may rely on
virIdentity. While worker func could check for identity and set
one it is not optimal - it may not have access to the identity of
the thread creating the pool and thus would have to call
virIdentityGetSystem(). Allow passing identity when creating the
pool.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is a typical example of what can go wrong when sending out
an old patch. Back in January, when I was writing
qemuProcessHandleMemoryDeviceSizeChange() events were sent to the
worker pool thread using virThreadPoolSendJob(). Then, in July a
helper was introduced (qemuProcessEventSubmit()) but since my
code was not committed and I did not pay attention my code wasn't
updated. Later, when I merged my code it uses the old approach.
BTW: this also fixes a possible double free which I completely
missed when writing the code ~10 months ago.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Nobody's interested in the return value of any of
struct _qemuMonitorCallbacks callbacks. They are all void, but
domainMemoryDeviceSizeChange. Change it to void.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
While the QCOW2 cluster size is represented in only 4 bits in the QCOW2
header and thus 1 << cluster_size cannot overflow int,
qcow2GetClusterSize is supposed to return unsigned long long so we can
just compute the result as ULL rather than computing it as int and
promoting to unsigned long long.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
One of the paths returned -1 directly without going through the cleanup
section.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
It's only used once and open coding it is at least as clear as using the
macro.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
qemuBuildPMPCIRootHotplugCommandLine() returns 0 unconditionally. There is no
failure scenario at present. So clean up the code by removing integer return
from the function and also remove the failure check conditional from the
function call.
Also fix indentation for the above function call while at it.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
This reverts commit 58ba0f6a3d.
Conflict:
* src/qemu/qemu_capabilities.[ch]
Because other new cap flags had been added since the original
commit, reformatting was necessary to follow the "groups of
five" pattern.
* tests.qemucapabilitiesdata/caps_6.2.0.x86_64.xml
This file was added after the original commit that we
are reverting, so had to be manually edited to remove
the two capabilities.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit bef0f0d8be.
Conflicts:
tests/qemuxml2argvdata/q35-acpi-hotplug-bridge-disable.args
* this file had been renamed from its original, then renamed back,
which understandably confused git. It's being completely removed
here anyway, so the contents don't matter.
tests/qemuxml2argvtest.c
* change in context around removed chunk
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit 2d20f0bb05.
Conflicts:
tests/qemuxml2argvdata/pc-i440fx-acpi-hotplug-bridge-disable.args
tests/qemuxml2argvdata/q35-acpi-hotplug-bridge-disable.args
the test output of these files was regenerated because the tests
were changed upstream to use JSON on the commandline at a later
commit than the commit being reverted here (where they were changed
to use latest caps, but the patches to use JSON on the commandline
hadn't been committed yet).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit 6414603105.
Conflicts:
tests/qemuxml2argvdata/pc-i440fx-acpi-hotplug-bridge-enable.x86_64-latest.args
tests/qemuxml2argvdata/pc-i440fx-acpi-root-hotplug-enable.x86_64-latest.args
tests/qemuxml2argvdata/q35-acpi-hotplug-bridge-enable.x86_64-latest.args
These files are unrelated to the functionality we need to remove, so
they weren't removed, and the associated test cases weren't removed
from qemuxml2argvtest.c
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit 618e8665db.
This is the first in a series of 10 commits that revert (in reverse
order) the changes to add the <acpi-hotplug-bridge state='on|off'/>
switch to libvirt domain XML, which unfortunately needs to be removed
due to QEMU developers discovering a flaw with the design of the QEMU
commandline switch used to implement the libvirt switch that will
likely result in a new and different method of selecting hotplug
modes. Because the libvirt switch has not been in any official
releases of libvirt, we are still able to remove it completely, rather
than deprecating it.
The original commits began with commit
58ba0f6a3d. The other original commit
IDs are documented in each revert commit.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
The meson 0.60.0 release introduced a bug with the '/' operator when
using an empty path component. '/foo' / '' will now result in '/foo'
not '/foo/'
https://github.com/mesonbuild/meson/issues/9450
This breaks libvirt because xsltproc requires the trailing '/' on the
output directory path. Fortunately the explicit 'join_paths' function
is not affected by the regression
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This commit extends libvirt XML configuration to support luks2 encryption format.
This means that <encryption format="luks2" engine="librbd"> becomes valid.
Currently librbd is the only engine that supports this new format.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
rbd encryption is new in qemu 6.1.0.
This commit adds a new encryption engine property which
allows the user to use this new encryption engine.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This commit extends libvirt XML configuration to support a custom encryption engine.
This means that <encryption format="luks" engine="qemu"> becomes valid.
The only engine for now is qemu. However, a new engine (librbd) will be added in an upcoming commit.
If no engine is specified, qemu will be used (assuming qemu driver is used).
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
rbd encryption is new in qemu 6.1.0.
This commit adds capability probing for it.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The post parse callback is part of the real (non-test) processing flow.
This commit adds it (for disks) to the qemublocktest flow as well.
Specifically, this will be needed for tests that use luks encryption,
so that the default encryption engine (which is added in an upcoming commit)
will be overridden by qemu.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This removes the libnetcf-dev package from Debian Sid, as it is no
longer available in that distro stream.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
After previous cleanups, some 'error' labels were rendered
needless - they contain nothing more than a return statement.
Well, those labels can be dropped and 'goto error' can be
replaced with return statement directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
After previous cleanups, some 'cleanup' labels were rendered
needless - they contain nothing more than a return statement.
Well, those labels can be dropped and 'goto cleanup' can be
replaced with return statement directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Let's replace VIR_FREE() calls with g_autofree. Not all calls can
be replaced though - the legitimate ones are kept (e.g. those
which free array, or which free a struct for which we don't have
g_autoptr() yet, and so on).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
A lot of explicit free calls can be saved when virJSONValue
variables are declared with g_autoptr(). There's one caveat:
there was a slight deviation from our usual pattern such that
@cmd variable was not initialized to NULL but as the very first
step it was assigned a value using qemuMonitorJSONMakeCommand().
While this works in theory it upset my GCC-11.2 (but only when
building with -O2). So I had to initialize the variable in such
case too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The reason why @entry variable in qemuMonitorJSONExtractPRManagerInfo()
was declared at the top most level was that the variable is used under
the cleanup label. However, if declared using g_autofree then the
variable can be declared inside the loop it is used in.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There's one place (specifically qemuMonitorJSONParseCPUModel())
where we can avoid explicit free call for qemuMonitorCPUModelInfo
struct.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
We have g_autoptr() for virCPUData struct defined already. Let's
use it in qemu_monitor_json.c and drop explicit free calls.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The qemuMonitorJSONQueryRxFilterParse() function is called to
parse the output of 'query-rx-filter' and store results into
passed virNetDevRxFilter structure. However, it is doing so in a
bit clumsy way - the return pointer is set in all cases (i.e.
even in case of error) and thus the cleanup label is more
complicated than it needs to be. With a help of g_autoptr() and
g_steal_pointer() the return pointer can be set only in case of
success - which is what callers expect anyway.
The same applies to qemuMonitorJSONQueryRxFilter().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
In the qemuMonitorJSONGetMigrationStats() there's a code under
cleanup label that's clearing returned @stats if the function
returns with an error. However, transitively there's just one
caller - qemuMigrationAnyFetchStats() - and it doesn't care for
this behaviour. Drop the code to simplify the cleanup label.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
All callers of qemuMonitorJSONHumanCommand() pass a non-NULL pointer
as @reply_str therefore there's no need to check whether it is NULL.
NB, the sister function (qemuMonitorJSONArbitraryCommand()) doesn't
check for NULL either.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
In qemuMonitorJSONCommandWithFd() given command (represented by
virJSONValue struct) is translated to string (represented by
virBuffer). The ownership of the string is then transferred to
the message which is then sent. The downside of this approach is
we have to have an explicit call to free the string from the
message. But if the message just "borrowed" the string (which it
can safely do because it is just reading from the string) then
automatic free of the buffer takes care of freeing the string.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The qemuMonitorNextCommandID() function can never fail. There's
no need to check for its retval then. Moreover, the temporary
variable used to hold the retval can be declared in the inner
most block.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
In a few places we declare a variable (which is optionally
followed by a code not touching it) then set the variable to a
value and return the variable immediately. It's obvious that the
variable is needless and the value can be returned directly
instead.
This patch was generated using this semantic patch:
@@
type T;
identifier ret;
expression E;
@@
- T ret;
... when != ret
when strict
- ret = E;
- return ret;
+ return E;
After that I fixed couple of formatting issues because coccinelle
formatted some lines differently than our coding style.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuMonitorJSONGetMigrationCapabilities() command executes
'query-migrate-capabilities' command and returns early if QEMU
doesn't know the command. Well, the command was introduced in
QEMU release 1.2 (specifically in commit v1.2.0-rc0~29^2~11) and
since the minimum required version is 2.11.0 we can be sure that
command will always exist.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuMonitorJSONGetMemoryDeviceInfo() command executes
'query-memory-devices' command and returns early if QEMU
doesn't know the command. Well, the command was introduced in
QEMU release 2.1 (specifically in commit v2.1.0-rc0~41^2~9) and
since the minimum required version is 2.11.0 we can be sure that
command will always exist.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuMonitorJSONGetKVMState() command executes 'query-kvm'
command and returns early if QEMU doesn't know the command. Well,
the command was introduced in QEMU release 0.14 and since the
minimum required version is 2.11.0 we can be sure that command
will always exist.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuMonitorJSONGetDumpGuestMemoryCapability() command
executes 'query-dump-guest-memory-capability' command and returns
early if QEMU doesn't know the command. Well, the command was
introduced in QEMU release 2.0 (specifically in commit
v2.0.0-rc0~43^2~16) and since the minimum required version is
2.11.0 we can be sure that command will always exist.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuMonitorJSONGetMigrationParams() function executes
'query-migrate-parameters' command and returns early if QEMU
doesn't know the command. Well, the command was introduced in
QEMU release 2.4 (specifically in commit v2.4.0-rc0~147^2~3) and
since the minimum required version is 2.11.0 we can be sure that
the command will always exist.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of "unsupported" test case is to check whether our code
handles 'CommandNotFound' error returned for
'query-migrate-parameters' monitor command. Well, the command is
pretty old and every QEMU that we are dealing with supports it.
Thus this test case is useless. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Describes the format of the newly added VPD capability and gives and
example for a real-world device.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
* XML serialization and deserialization of PCI VPD;
* PCI VPD capability flags added and used in relevant places;
* XML to XML tests for the added capability.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Add helper functions to virpci to provide means of checking for a VPD
file presence and for VPD resource retrieval using the PCI VPD parser.
The added test assesses the basic functionality of VPD retrieval while
the full parser is tested by virpcivpdtest.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Add support for deserializing the binary PCI/PCIe VPD format and storing
results in memory.
The VPD format is specified in "I.3. VPD Definitions" in PCI specs
(2.2+) and "6.28.1 VPD Format" PCIe 4.0. As section 6.28 in PCIe 4.0
notes, the PCI Local Bus and PCIe VPD formats are binary compatible
and PCIe 4.0 merely started incorporating what was already present in
PCI specs.
Linux kernel exposes a binary blob in the VPD format via sysfs since
v2.6.26 (commit 94e6108803469a37ee1e3c92dafdd1d59298602f) which requires
a parser to interpret.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
This will make it possible to limit changes to a single spot
later on, and is also just an overall nicer way to create and
destroy objects.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There doesn't seem to be a reason for IOMMUs not to be handled
by this function.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This involves a bit of a hack, but is overall preferable to
forcing callers to pass non-const devdata as argument.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These were generated using a QEMU binary built from commit
v6.1.0-1552-g362534a643
Notably, this causes the arguments of -device to be generated
in JSON format.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This commit is related to 5de203f879 which I pushed a few days
ago. While that commit prioritized closing clients socket over
the rest of I/O process, this one goes one step further and
temporarily suspends processing new connection requests.
A brief recapitulation of the problem:
1) assume that libvirt is at the top of RLIMIT_NOFILE (that is no
new FDs can be opened).
2) we have a client trying to connect to a UNIX/TCP socket
Because of 2) our event loop sees POLLIN on the socket and thus
calls virNetServerServiceAccept(). But since no new FDs can be
opened (because of 1)) the request is not handled and we will get
the same event on next iteration. The poll() will exit
immediately because there is an event on the socket. Thus we end
up in an endless loop.
To break the loop and stop burning CPU cycles we can stop
listening for events on the socket and set up a timer tho enable
listening again after some time (I chose 5 seconds because of no
obvious reason).
There's another area where we play with temporarily suspending
accept() of new clients - when a client disconnects and we check
max_clients against number of current clients. Problem here is
that max_clients can be orders of magnitude larger than
RLIMIT_NOFILE but more importantly, what this code considers
client disconnect is not equal to closing client's FD.
A client disconnecting means that the corresponding client
structure is removed from the internal list of clients. Closing
of the client's FD is done from event loop - asynchronously.
To avoid this part stepping on the toes of my fix, let's make the
code NOP if socket timer (as described above) is active.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The repo-lockdown service used to run as a bot outside GitHub, but has
now switched to using the GitHub Actions workflow framework. This
requires use of a new configuration file.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some guest features that map to the -cpu arg are still added using
implicit syntax "feature" which is a deprecated shorthand for
"feature=on".
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With the previous refactorings, there's no real benefit from the
qemuBuildCpuFeature helper method. Only one of the callers really
needs the CPU feature name re-writing logic, the others can just
use the right name directly.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The -cpu arg gained support for feature=on|off syntax for the x86
emulator in 2.4.0
commit 38e5c119c2925812bd441450ab9e5e00fc79e662
Author: Eduardo Habkost <ehabkost@redhat.com>
Date: Mon Mar 23 17:29:32 2015 -0300
target-i386: Register QOM properties for feature flags
Most other targets gained this syntax even earlier in 1.4.1
commit 1590bbcb02921dfe8e3cf66e3a3aafd31193babf
Author: Andreas Färber <afaerber@suse.de>
Date: Mon Mar 3 23:33:51 2014 +0100
cpu: Implement CPUClass::parse_features() for the rest of CPUs
CPUs who do not provide their own implementation of feature parsing
will treat each option as a QOM property and set it to the supplied
value.
There appears no reason to keep supporting "+|-feature" syntax,
given the current minimum QEMU version.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU switched from using underscores in x86 CPU features to hyphens
in the 2.8.0 series with two commits
commit fc7dfd205f3287893c436d932a167bffa30579c8 (HEAD, refs/bisect/bad)
Author: Eduardo Habkost <ehabkost@redhat.com>
Date: Fri Sep 30 15:49:40 2016 -0300
target-i386: Remove underscores from feat_names arrays
commit 54b8dc7c19cd781e96f1e9b001ca6001d804eb19
Author: Eduardo Habkost <ehabkost@redhat.com>
Date: Fri Sep 30 15:49:38 2016 -0300
target-i386: Register aliases for feature names with underscores
Libvirt names use underscores so we conditionally tranlate the
names when talking to new QEMU. Since the min QEMU was raised to
version 2.11.0, all QEMU versions we talk to expect hypens, so
the translation can be done unconditionally.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU switched from using underscores in x86 CPU features to hyphens
in the 2.8.0 series with two commits
commit fc7dfd205f3287893c436d932a167bffa30579c8 (HEAD, refs/bisect/bad)
Author: Eduardo Habkost <ehabkost@redhat.com>
Date: Fri Sep 30 15:49:40 2016 -0300
target-i386: Remove underscores from feat_names arrays
commit 54b8dc7c19cd781e96f1e9b001ca6001d804eb19
Author: Eduardo Habkost <ehabkost@redhat.com>
Date: Fri Sep 30 15:49:38 2016 -0300
target-i386: Register aliases for feature names with underscores
Libvirt names use underscores so we conditionally tranlate the
names when talking to new QEMU. Since the min QEMU was raised to
version 2.11.0, all QEMU versions we talk to expect hypens, so
the translation can be done unconditionally.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The non-released distros have reasonably frequent package installation
failures that can last for days at a time. This makes them unsuitable
for use as gating CI jobs.
This ensures all of the jobs in Debian Sid, Fedora Rawhide, openSUSE
Tumbleweed and FreeBSD Current are marked "allow-failure: true".
This means the jobs still run, but any failure will not be considered
fatal to the pipeline.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The layering of the cross containers is fixed to move arch specific
ccache setup out of the common base layer.
A missing Cirrus CI variable substitution is added, though this is
irrelevant given libvirt's package list.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Always fetch the stats for all backing chain members. Callers from
qemu_driver.c already always passed 'true' and the caller from the
migration code won't mind when we fetch all stats.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All (proper) callers pass true so we can remove the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory clearing and remove the cleanup label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory clearing for the temporary variables and remove the
cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory clearing for the temporary variable and remove the
cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory clearing for the temporary variable and remove the
cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Similarly to the fix to 'qemuDomainBlocksStatsGather' we should be
always fetching the full backing chain so that we can avoid any
automatic filter notes which would prevent us from fetching the stats
for the correct nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In certain cases such as when running a backup blockjob qemu installs a
filter node between the frontend and the top node of the backend of the
disk. The stats gathering code didn't instruct the monitor code to fetch
the stats for all the layers, so since the top layer now doesn't have
stats we were reporting wrong stats such as allocation.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2015281
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Using swtpm v0.7.0 we can run swtpm_setup to create default config files
for swtpm_setup and swtpm-localca in session mode. Now a user can start
a VM with an attached TPM without having to run this program on the
command line before. This program needs to run once.
This patch addresses the issue raised in
https://bugzilla.redhat.com/show_bug.cgi?id=2010649
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Libvirt will put the pid file of virtiofsd to per-domain directory.
However, the ownership of the per-domain directory is the user to run
the QEMU process and the user has the write permission of the directory.
If VM escape occurs, the attacker can
1. write arbitrary content to the pid file (if running QEMU using root),
then the attacker can kill any process by writing appropriate pid to
the pid file;
2. spoof the pid file (if running QEMU using a regular user), then the
virtiofsd process will never be cleared even if the VM is destroyed.
So, move the pid file of virtiofsd from per-domain directory to
stateDir.
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Libvirt will put the pid file of pr-helper to per-domain directory.
However, the ownership of the per-domain directory is the user to run
the QEMU process and the user has the write permission of the directory.
If VM escape occurs, the attacker can
1. write arbitrary content to the pid file (if running QEMU using root),
then the attacker can kill any process by writing appropriate pid to
the pid file;
2. spoof the pid file (if running QEMU using a regular user), then the
pr-helper process will never be cleared even if the VM is destroyed.
So, move the pid file of pr-helper from per-domain directory to
stateDir.
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Issuing simple QMP commands is pain as they need to be wrapped by the
JSON wrapper:
{ "execute": "COMMAND" }
and optionally also:
{ "execute": "COMMAND", "arguments":...}
For simple commands without arguments we can add syntax sugar to virsh
which allows simple usage of QMP and additionally prepares also for
passing through of the 'arguments' section:
virsh qemu-monitor-command $VM query-status
is equivalent to
virsh qemu-monitor-command $VM '{"execute":"query-status"}'
and
virsh qemu-monitor-command $VM query-named-block-nodes '{"flat":true}'
or
virsh qemu-monitor-command $VM query-named-block-nodes '"flat":true'
is equivalent to
virsh qemu-monitor-command $VM '{"execute":"query-named-block-nodes", "arguments":{"flat":true}}'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Normally this would be considered an internal detail which we don't
document in the news, but in this case I'd like to make people aware of
the change so that they preferrably report them ASAP.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we use JSON with -device we can validate it at least partially
(since the schema for 'device_add' is for now incomplete) against the
QMP schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting with QEMU-6.2 started accepting a JSON object as argument for
'-device' which will also become the only syntax considered stable by
qemu in the future.
Since libvirt was recently converted to generate the properties via JSON
to begin wit we can start using it on the commandline as well, by simply
enabling the QEMU_CAPS_DEVICE_JSON capability, which we do by probing
for the 'json-cli' feature flag of 'device_add'.
Normally a change which changes a commandline output should be happening
only after the impacted real-caps test files are forked in the version
preceding the change, but in this case it's not necessary as the logic
for generating the device properties stays identical and we just change
the output format (avoid conversion). Additionally we still have a lot
of tests validating the conversion to the old commandline options.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the 'allowIncomplete' argument of testQEMUSchemaValidateCommand to
validate at least properties which are already described by the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QMP schema for 'device_add' is not complete yet. Allow validation of
incomplete schema so that we can enable at least some validation. Once
there's more schema in the future all present members are still
validated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to v6.1.0-1510-gc148a05721 which most notably adds the 'json-cli'
feature for 'device_add' QMP command meaning that -device accepts JSON.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two variables (@vm and @domflags) in qemuConnectGetAllDomainStats()
that are used only within the for() loop but declared for entire function.
Bring them into the loop to make it obvious they are not used outside of it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Our general pattern is to initialize @ret to -1 and set it to 0
only at the end of a function. Some functions in
objecteventtest.c do not follow this pattern.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The sole purpose of the lifecycleEventCounter_reset() function is
to zero out given lifecycleEventCounter struct. Well, we can let
the compiler zero it out when declaring a variable and just
remove the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
I think that virsh domstats problem on qemu < 5.2.0 is what users want
to find which version fixes.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
query-dirty-rate command is used for virsh domstats by default, but this
is available only on qemu >=5.2.0.
By this commit, qemu domain stats will check capabilities requirements before issuing actual query.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
One of qemuDomainGetStatsWorkers requires capabilities to run.
This commit adds capability information to qemuDomainGetStatsWorkers.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
query-dirty-rate command is used for virsh domstats by default, but this
is available only on qemu >=5.2.0.
In this commit, add capability flag for query-dirty-rate first.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There have been countless reports from users concerned about the following
error reported by libvirtd when qemu domains are shutdown
internal error: End of file from qemu monitor
While the error is harmless, users often mistaken it for real problem with
their deployments. EOF from the monitor can't be entirely ignored since
other threads may be using the monitor and must be able to detect the EOF
condition.
One potential fix is to delay reporting EOF until the monitor is used
after EOF is detected. This patch adds a 'goteof' member to the
qemuMonitor structure, which is set when EOF is detected on the monitor
socket. If another thread later tries to send data on the monitor, the
EOF error is reported.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are few functions in virnetsocket.c where an object/memory
is freed by explicit call. Use g_autoptr()/g_autofree/VIR_AUTOCLOSE
to do that automatically.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of virNetSocketNewConnectCommand() is to execute passed
command and attach socket pair/pipe to it so that client socket
can be opened (this is used for connections with alternative
transports, e.g. ssh). The virCommand is created in a caller and
then passed to virNetSocketNewConnectCommand() where it is freed
using virCommandFree(). This approach is wrong on two levels:
1) The deallocation happens on a different level than allocation,
2) There's a WIN32 stub that just reports an error and doesn't
free the command.
However, with g_autoptr() trickery the command can be freed in
caller.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit ad209e7d adds QEMU_CAPS_VIRTIO_BLK_QUEUE_SIZE capability, but
the following commit 2d6d67e1 missed to use it and uses
QEMU_CAPS_VIRTIO_BLK_NUM_QUEUES instead.
This commit fixes the mistake.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The capability reflects whether QEMU is capable of -device
virtio-*,ats=. Since the property was introduced in QEMU commit
v2.9.0-rc0~162^2~32 we can safely assume the property is always
present as the minimal version required is 2.11.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some tests cases in qemuxml2argvtest that aim to check
whether our validator rejects <driver ats=''/> when
QEMU_CAPS_VIRTIO_PCI_ATS capability is not present. Well, such
scenario can't happen really because the capability will always
be present.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The capability reflects whether QEMU is capable of -device
virtio-*,iommu_platform=. Since the property was introduced in
QEMU commit v2.9.0-rc0~162^2~37 we can safely assume the property
is always present as the minimal version required is 2.11.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some tests cases in qemuxml2argvtest that aim to check
whether our validator rejects <driver iommu=''/> when
QEMU_CAPS_VIRTIO_PCI_IOMMU_PLATFORM capability is not present.
Well, such scenario can't happen really because the capability
will always be present.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are a few files containing expected output for test cases
that no longer exist. Remove them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We did not set priv->migMaxBandwidth if '--bandwidth' was
specified as an option in the 'migrate' virsh command. This
caused in printing the wrong value if virsh command
'migrate-getspeed' was called during the migration. This patch
first sets the value to the given bandwidth (if one was
specified) and restores the previous value after the migration.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1806856
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
QEMU declares the bootindex types as:
bootindexA=<int32>
bootindexB=<int32>
The driveA/driveB parameters were deprecated and removed in qemu-6.0.
We'll keep them for compatibility, but they are not used with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuBuildFloppyCommandLineControllerOptions was generating config for
both the implicit and explicit fdc. The explicit FDC is using '-device'
and thus will need to be converted to JSON.
Split up the lookup of the floppy drive configs from the actual command
generation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU declares the props we control as:
'ccid-card-emulated'
backend=<str>
cert1=<str>
cert2=<str>
cert3=<str>
db=<str>
'ccid-card-passthru'
chardev=<str> - ID of a chardev to use as a backend
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While this device doesn't have any properties it must be converted to
use qemuBuildDeviceCommandlineFromJSON so that we can validate it in the
future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU declares the 'guid' property as:
guid=<str> - UUID (aka GUID) or "auto" for random value (default) (default: "auto")
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move it into the validator. Note that the placement into the device
validation part is intentional so that it also covers hotplug code
paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have a commonly used helper virDomainControllerAliasFind, which does
the same thing and also reports errors internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'virXMLPropEnum' to parse it and fix all switch statements which
didn't include the VIR_DOMAIN_SMARTCARD_TYPE_LAST case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't check the type twice, move the chardev validation into the
switch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the code was converted to use this helper we can remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a50c473ad6 ("qemu: move temp file of screenshot and memorypeek to
per-domain dir") and c4f3c955d5 ("qemu: don't change ownership of
cache directory"), I move the temporary files of screenshot and
memorypeek from the cache directory to per-domain directory, and the
only user of the cache directory is the domain capabilities currently.
Since the domain capabilities are used by libvirtd, no need to set the
ownership of the cache directory to qemu_user and qemu_group.
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some people from Red Hat does not use 'redhat.com' domain emails.
They use personal or other domains.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
../../work/libvirt/src/qemu/qemu_hotplug.c: In function ‘qemuDomainAttachFSDevice’:
../../work/libvirt/src/qemu/qemu_hotplug.c:3458:68: error: ordered comparison of pointer with integer zero [-Werror=extra]
3458 | if (qemuBuildVHostUserFsDevProps(fs, vm->def, charAlias, priv) < 0)
| ^
cc1: all warnings being treated as errors
Fixes: b987873034
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The data is based on commit v6.1.0-1313-gc09124dcb8
Notable changes:
- New machine types for the 6.2 cycle were added
- MEM_UNPLUG_ERROR event was deprecated and replaced by
DEVICE_UNPLUG_GUEST_ERROR
- Intel SGX related commands and devices added
- 'copy-before-write' blockdev filter was added
- 'memory-backend-epc' was added
- new cpu flags
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Do not depend on passing a logManager. Create a new connection.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We control only the 'tpmdev' property of TPM devices which is a string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The codec devices have the following properties we control:
cad=<uint32> - (default: 4294967295)
audiodev=<str> - ID of an audiodev to use as a backend
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The sound devices have only the 'audiodev' property which is a string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All virtio devices were converted to the new JSON formatter so we can
remove the old one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We control the following properties of the devices in question:
'virtio-gpu'
virgl=<bool> - on/off (default: true)
'qxl'
ram_size=<uint32> - (default: 67108864)
vram_size=<uint64> - (default: 67108864)
vram64_size_mb=<uint32> - (default: 4294967295)
vgamem_mb=<uint32> - (default: 16)
max_outputs=<uint16> - (default: 0)
'vhost-user-gpu'
max_outputs=<uint32> - (default: 1)
chardev=<string>
'VGA'
vgamem_mb=<uint32> - (default: 16)
'bochs-display'
vgamem=<size> - (default: 16777216)
common for all devices:
xres=<uint32> - (default: 0)
yres=<uint32> - (default: 0)
The only noticable change is using memory size in bytes for
'bochs-display' instead of kibibytes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'vhost-user-fs-pci' has following properties we control:
chardev=<str> - ID of a chardev to use as a backend
queue-size=<uint16> - (default: 128)
tag=<str>
bootindex=<int32>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the old-style 'device_add' helpers which parse the commandline
arguments to JSON since we now coverted all usage to use JSON directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Build the properties of 'vhost-vsock' device via JSON. In comparison to
previous similar refactors this also modifies the hotplug code to attach
the vhost fd handle explicitly rather than using
'qemuMonitorAddDeviceWithFd'.
The properties of vhost-vsock have the following types according to
QEMU:
guest-cid=<uint64> - (default: 0)
vhostfd=<str>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Build the properties of 'vhost-scsi' device via JSON. In comparison to
previous similar refactors this also modifies the hotplug code to attach
the vhost fd handle explicitly rather than using
'qemuMonitorAddDeviceWithFd'.
The 'vhost-scsi' device doesn't have any special (non-string) properties.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Build commandlines for character devices via JSON.
For devices using 'VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_SERIAL' address
type 'qemuBuildDeviceAddressProps' will now generate the address. The
only special property is 'nr'. QEMU declares it as:
nr=<uint32> - (default: 4294967295)
The test fallout is caused by formatting addresses as decimal numbers
instead of hex as described in the commit which added
'qemuBuildDeviceAddressProps'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The handlers for PCI, SCSI and USB controllers already use JSON
internally. This patch converts 'virtio-serial', 'ccid' and 'sata' to do
the same and passes out the JSON directly so that it can be used in
monitor code to avoid conversion.
From the controllers converted in this patch only 'virtio-serial' has
special properties. QEMU thinks they have the following types:
max_ports=<uint32> - (default: 31)
vectors=<uint32> - (default: 2)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Internally format the PCI controller properties into JSON, but convert
it back to a string as preparation for upcoming refactors.
The following types are declared for the properties we use by QEMU:
'nec-usb-xhci'
p2=<uint32> - (default: 4)
p3=<uint32> - (default: 4)
'ich9-usb-uhci6'
masterbus=<str>
firstport=<uint32> - (default: 0)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the validation code into a separate function. For now the
validation is still kept in the commandline format step as simply just
moving it to the validator causes failures in the test suite, which will
need to be investigated deeper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Internally format the PCI controller properties into JSON, but convert
it back to a string so that we for now change just the SCSI controller.
The change in tests is expected as the 'port' field for various PCI
controllers is expected to be a number and thus can't be represented as
a hexadecimal value in JSON.
QEMU expects the following types:
'pci-bridge'
chassis_nr=<uint8> - (default: 0)
'pxb-pcie':
bus_nr=<uint8> - (default: 0)
'pcie-root-port'
port=<uint8> - (default: 0)
chassis=<uint8> - (default: 0)
hotplug=<bool> - (default: true)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Internally format the SCSI controller properties into JSON, but convert
it back to a string so that we for now change just the SCSI controller.
The change in tests is expected as the 'reg' field for a spapr-vio
address is expected to be a number:
$ qemu-system-ppc64 -device spapr-vscsi,help
spapr-vscsi options:
reg=<uint32> - (default: 4294967295)
The hand-rolled generator used hex representation but that will not be
possible on the monitor via JSON.
The properties of 'virtio-scsi' have following types according to QEMU:
iothread=<link<iothread>>
num_queues=<uint32> - (default: 4294967295)
cmd_per_lun=<uint32> - (default: 128)
max_sectors=<uint32> - (default: 65535)
ioeventfd=<bool> - on/off (default: true)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the code into a new function called qemuBuildControllerPCIDevStr
so that the code is self contained and the original function easier to
follow.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the code into a new function called qemuBuildControllerSCSIDevStr
so that the code is self contained and the original function easier to
follow.
This patch also moves the formatting of the properties relevant only for
the 'virtio-scsi' controller to the specific case so it's more clear
where they belong to.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that all users were converted to qemuBuildRomProps we can remove the
old code and un-mark qemuBuildRomProps as unused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the bootindex before the address so that the code is simpler.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The types for the special fields of the 'virtio-blk-pci' according to
QEMU are:
iothread=<link<iothread>>
ioeventfd=<bool> - on/off (default: true)
event_idx=<bool> - on/off (default: true)
scsi=<bool> - on/off (default: false)
num-queues=<uint16> - (default: 65535)
queue-size=<uint16> - (default: 256)
For all disks we also use the following properties (based on 'scsi-hd'):
device_id=<str>
share-rw=<bool> - (default: false)
drive=<str> - Node name or ID of a block device to use as a backend
chardev=<str> - ID of a chardev to use as a backend <- vhost-user-blk-pci
bootindex=<int32>
logical_block_size=<size> - A power of two between 512 B and 2 MiB (default: 0)
physical_block_size=<size> - A power of two between 512 B and 2 MiB (default: 0)
wwn=<uint64> - (default: 0)
rotation_rate=<uint16> - (default: 0)
vendor=<str>
product=<str>
removable=<bool> - on/off (default: false)
write-cache=<OnOffAuto> - on/off/auto (default: "auto")
cyls=<uint32> - (default: 0)
heads=<uint32> - (default: 0)
secs=<uint32> - (default: 0)
bios-chs-trans=<BiosAtaTranslation> - Logical CHS translation algorithm, auto/none/lba/large/rechs (default: "auto") <- ide-hd
serial=<str>
werror=<BlockdevOnError> - Error handling policy, report/ignore/enospc/stop/auto (default: "auto")
rerror=<BlockdevOnError> - Error handling policy, report/ignore/enospc/stop/auto (default: "auto")
The 'wwn' field is changed from a hex string to a number since qemu
actually treats it as a number.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the logic to determine the actual settings into
'qemuBuildDiskGetErrorPolicy' so that it can be reused when we'll
convert the disk -device formatter to JSON.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'event_idx' option for virtio devices was introduced by QEMU commit
bcbabae8f which is contained in v0.15.0-rc0 and can't be compiled out,
thus we don't need to conditionally enable it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The support for the 'ioeventfd' knob of virtio devices was introduced by
QEMU commit 25db9ebe15125 contained in v0.14.0-rc0 and it can't be
compiled out. Thus libvirt can assume it's support and remove
conditional code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since 'qemuBuildDeviceAddressProps' now also builds 'drive' addresses
the generator is way simpler and doesn't use any special fields.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the code from 'qemuValidateDomainDeviceDefDiskFrontend' into
'qemuValidateDomainDeviceDefAddressDrive' which is called from
'qemuValidateDomainDeviceDefAddress' so that we have all address
validation code together.
This also allows us to remove the inline validation inside
'qemuBuildSCSIHostdevDevStr'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce infrastructure to format 'drive' addresses via the standard
helper rather than hand-rolled generators used inline.
The code needs to know the disk bus to format the correct address which
is passed in via an internal field in virDomainDeviceDriveAddress.
The field types according to QEMU are as following:
'ide-hd' for VIR_DOMAIN_DISK_BUS_IDE and VIR_DOMAIN_DISK_BUS_SATA
unit=<uint32> - (default: 4294967295)
'floppy' for VIR_DOMAIN_DISK_BUS_FDC
unit=<uint32> - (default: 4294967295)
'scsi-hd' for VIR_DOMAIN_DISK_BUS_SCSI
channel=<uint32> - (default: 0)
scsi-id=<uint32> - (default: 4294967295)
lun=<uint32> - (default: 4294967295)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For properties we use these are the QEMU types:
host=<str> - Address (bus/device/function) of the host device, example: 04:10.0
bootindex=<int32>
failover_pair_id=<str>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For 'usb-mouse'/'usb-tablet'/'usb-kbd' we don't use any special
property.
For 'virtio-input-pci' we only use the 'evdev' argument which is a
string so this conversion doesn't impact anything.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'usb-redir' device has the following types according to QEMU for
properties we control:
chardev=<str> - ID of a chardev to use as a backend
filter=<str>
bootindex=<int32>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'usb-host' device has the following types according to QEMU for
properties we control:
hostdevice=<str>
hostbus=<uint32> - (default: 0)
hostaddr=<uint32> - (default: 0)
bootindex=<int32>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'vfio-pci-nohotplug' device has the following property types
according to QEMU:
display=<OnOffAuto> - on/off/auto (default: "off")
sysfsdev=<str>
ramfb=<bool>
bootindex=<int32>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'virtio-rng' has the following property types according to QEMU:
rng=<link<rng-backend>>
max-bytes=<uint64> - (default: 9223372036854775807)
period=<uint32> - (default: 65536)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the 'deflate-on-oom' and 'free-page-reporting' before the address
to simplify the genrator code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The generated properties have the following types according to QEMU:
deflate-on-oom=<bool> - on/off (default: false)
free-page-reporting=<bool> - on/off (default: false)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Note that the legacy 'ivshmem' device was already removed upstream, but
it's converted so that the code is identical.
For the two modern devices QEMU considers the properties being of
following types:
'ivshmem-doorbell'
chardev=<str> - ID of a chardev to use as a backend
ioeventfd=<bool> - on/off (default: true)
master=<OnOffAuto> - on/off/auto (default: "off")
vectors=<uint32> - (default: 1)
'ivshmem-plain'
master=<OnOffAuto> - on/off/auto (default: "off")
memdev=<link<memory-backend>>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The watchdog doesn't have any special properties.
Convert the command line generator and hotplug code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Format a JSON object with the device properties and then use
qemuBuildDeviceCommandlineFromJSON to convert it to the standard
commandline for now.
The 'ioport' property of 'pvpanic' is a number in QEMU:
ioport=<uint16> - (default: 1285)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a JSON variant of the generator 'rom' properties. For convenience
both the old and new are for now marked as unused, which will be removed
once the conversion is complete.
The formatted properties have following types according to QEMU.
'virtio-blk-pci' was used as an example:
rombar=<uint32> - (default: 1)
romfile=<str>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The helper converts the JSON object to a string and adds it to the
current command as arguments of '-device'. The helper also prepares for
'-device' taking JSON directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a JSON variant of the generator of properties for virtio devices.
For convenience both the old and new are for now marked as unused, which
will be removed once the conversion is complete.
The formatted properties have following types according to QEMU.
'virtio-blk-pci' was used as an example:
disable-legacy=<OnOffAuto> - on/off/auto (default: "auto")
disable-modern=<bool> - (default: false)
iommu_platform=<bool> - on/off (default: false)
ats=<bool> - on/off (default: false)
packed=<bool> - on/off (default: false)
Note that <OnOffAuto> is an enum type without alternates in QMP so it
must be represented as a string in JSON.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the validation from 'qemuBuildRomStr' into the function which
validates device info. It was originally named
'qemuValidateDomainDeviceDefAddress' but this commit renames it to
'qemuValidateDomainDeviceDefInfo'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit ffda44030a added validation of the 'acpiIndex' field in
virDomainDeviceInfo by calling 'virDomainDeviceInfoIterate' from
'qemuValidateDomainDef'. This is overly complicated we have
'qemuValidateDomainDeviceDef' which is already called for every single
device so we can avoid the extra loop.
Restructure the code by calling 'qemuValidateDomainDeviceInfo' directly
from 'qemuValidateDomainDeviceDef' and avoid unnecessary calls to
'virDomainDeviceGetInfo' by calling 'qemuValidateDomainDeviceDefAddress'
from 'qemuValidateDomainDeviceInfo'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the now unused boot-index related attributes and the code which
is assigning it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fill in the effective boot index for network devices (or hostdev-backed
network devices via 'qemuProcessPrepareDeviceBootorder'. This patch
doesn't clean up the cruft to make it more obvious what's happening.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename it to 'qemuProcessPrepareDeviceBootorder' and call it from
'qemuProcessPrepareDomain' rather than
'qemuProcessPrepareDomainStorage'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'effectiveBootIndex' is a copy of 'bootIndex' if '<boot order=' was
present and left unassigned if not. This allows hypervisor drivers to
reinterpret <os><boot> without being visible in the XML.
QEMU driver had a internal implementation for disks, which is now
replaced. Additionally this will simplify a refactor of network boot
assignment.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virtio-vga' is a virtio device but we didn't use the virtio formatter
for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Merge the code from qemuBuildVirtioOptionsStr so that we don't have to
call two separate functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code doesn't need the name as it determines it internally. Remove
the argument and fix all callers. In certain cases it led to
simplification of the logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we already have code for per-device behaviour we can also populate
the device name and extract virtioOptions in the switch statement so
that callers don't have to pass it in.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the bus suffix in a separate call. This will make it more obvious
what's happening in the next commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is static and will be needed in the virtio device config
helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'virtio' argument was misleadingly implying that it's true for all
virtio devices, but that's not the case. 'virtio-vga(-gl)' is a virtio
device but doesn't accept the usual bus-dependant suffix.
Add a comment for 'qemuDeviceVideoGetModel' and another boolean
'virtioBusSuffix' which carries the above meaning so that the 'virtio'
argument can be fixed (it will be used later).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split out the function a bit more to separate the per-device code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the code into 'qemuBuildVirtioDevGetConfig' so that we can
later reuse it when converting individual device code into the more
modern JSON approach as the extracted code will be necessary either way.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To simplify upcoming refactors change the logic such that we don't
return early for device types which can't be transitional.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will start converting the formatting of arguments for
-device from a string to JSON so that we can keep proper types around
when using it via QMP.
This means we will need an equivalet for the device address builder
function. 'qemuBuildDeviceAddressProps' provides equal functionality,
but the output differs for fields where a number is expected, where
we've previously formatted a hex value but now end up with a decimal
value per JSON standard.
For given address types I've selected an example device and used
'-device $DEV,help' to obtain the current types recognized by qemu:
Note that 'bus' is not shown below, but it's already a string so we can
keep using it as a string.
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI (virtio-balloon-pci)
acpi-index=<uint32> - (default: 0)
addr=<int32> - Slot and optional function number, example: 06.0 or 06 (default: -1)
multifunction=<bool> - on/off (default: false)
Note that 'addr' is here defined as 'int32' but in fact internally in
qemu is an alternate type between a number and a string so we can keep
using strings here.
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_USB (usb-tablet)
port=<str>
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_SPAPRVIO (spapr-vty)
reg=<uint32> - (default: 4294967295)
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW (virtio-blk-cww)
devno=<str> - Identifier of an I/O device in the channel subsystem, example: fe.1.23ab
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_ISA (isa-serial)
iobase=<uint32> - (default: 4294967295)
irq=<uint32> - (default: 4294967295)
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_DIMM (pc-dimm)
slot=<int32> - (default: -1)
addr=<uint64> - (default: 0)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split up the bus lookup into a function called
'qemuBuildDeviceAddressPCIGetBus'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The PCI address case grew massive over time. Split it out into a new
function qemuBuildDeviceAddressPCIStr.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Mention the QMP command 'device_add' rather than 'qemuMonitorAddDevice'
and remove the weird formatting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For conversion of '-device' we'll try to avoid usage of arrays if
possible, so for now if the array coversion function is not provided the
convertor will error out.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With automatic memory freeing we can simplify the function to avoid two
almost-identical calls to virQEMUBuildCommandLineJSONRecurse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing and remove 'ret' variable and 'cleanup'
label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We commonly use 'props' for the JSON object describing something. Rename
the monitor device addition code.
Additionally the common approach is to clear the pointer if it was
consumed so the arguments are adjusted to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_autoptr for 'vcpuprops' and remove the 'cleanup' label and 'ret'
varlaible which is no longer needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Report the error from 'qemuValidateDomainWatchdogDef' rather than
'qemuBuildWatchdogDevStr'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The same test in regards to the 'panic' device is the 'panic-double'
case, thus panic-isa can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The flag will be used to switch use of JSON arguments for -device once
qemu will support it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The flag will be used to switch use of JSON arguments for -chardev once
qemu will support it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The returned argument list is a NULL-terminated string list and the only
caller doesn't use the count. Remove the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prevent duplication of code when extending the validator for new
commands. Add a struct describing a command to validate and make the
validation loop a bit more robust to corner cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Optimize the number of string copies by using the virBuffers in the
callers directly. Simplest way to achieve this is to just open code the
one function call 'virQEMUBuildDriveCommandlineFromJSON' was wrapping
in the two callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The -netdev formatter code switched to a real virQEMUCaps flag so we can
remove the old flags which used to enable JSON for -netdev for
validation purposes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that everything was replaced by the new code we can remove this
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Base the JSON output on a regular capability flag rather than purely
internal flag. This will prepare for the time when QEMU will accept JSON
argumets for -netdev.
For now the capability is not set (thus we for now don't have QMP
schema validation) but that will be addressed later.
To achieve this 'qemuBuildNetdevCommandlineFromJSON' is introduced
and all callers of 'virQEMUBuildNetdevCommandlineFromJSON' are
refactored to use the new helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Base the validation on presence of JSON as we do with other validated
commands. This will prepare the code for a refactor so that it's the
same for all validated commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We validate the generated props against the QMP schema which makes sure
that the objects are generated properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a capability that will be asserted once '-netdev' will accept
JSON. For now it will be dormant (only used by tests).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unify it with the upcoming capabilities for -netdev and -device.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All callers basically end up dumping the buffer into a string and then
adding '-object' 'props' arguments to virCommand. Simplify all callers
by doing this in the function itself.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Input devices of VIR_DOMAIN_INPUT_TYPE_EVDEV type are instantiated via
an '-object' rather than a '-device'. Mixing them in one function is a
bad idea as the caller then needs to use the string correctly which is
not the case in 'qemuDomainAttachInputDevice'.
Generate a JSON object for '-object' explicitly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename the function to 'qemuBuildMemoryCellBackendProps' and return the
properties before conversion to commandline arguments. This requires
changes in the caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Enforce that the ':' separator between the key and value is always
present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In many cases we use a signed value, but use the sign to note that it
was not assigned. For converting to JSON objects it will be handy to
have possibility to do this automatically.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 58ba0f6a3d added a capability which
is supported by all qemu versions we support. Remove it and the
associated dead code. Since the capability isn't present in any upstream
release we can delete it completely.
Specifically the commit itself states that it was introduced "around
(qemu) 2.1". The rest of the code handles properly that the feature is
used only on x86 with the i440fx machine so the capability is pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have input files for those, provide also xml2argv testing since we
have them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use real example configs to prove the support without the
need for using fake capabilities. Fix the recently added test cases.
The negative case for 'pc-i440fx-acpi-hotplug-bridge-disable' is removed
completely as there is no real qemu libvirt supports which wouldn't
have the capability.
The input file for the negative test on aarch64 is modified so that it's
actually a reasonably valid VM config.
Fixes: bef0f0d8be
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use two real example configs to prove the support without the
need for using fake capabilities. Fix the recently added test cases.
Fixes: 133d7983d6
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The error that "acpi-bridge-hotplug" is not supported would be triggered
only if both the ICH9 and PIIX don't support the capability and the
machine is q35. This makes no sense.
We want to check that the appropriate platform supports the appropriate
feature.
Fixes: 7300ccc9b3
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Added the following new libvirt conf option to the release note to
indicate their availability with the next release:
<feature>
<pci>
<acpi-bridge-hotplug state='off|on'/>
</pci>
</feature>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
This change adds backend qemu command line support for new libvirt
global feature 'acpi-bridge-hotplug'. This option can be used as
following:
<feature>
<pci>
<acpi-bridge-hotplug state='off|on'/>
</pci>
</feature>
The '<pci>' sub-element under '<feature>' is also newly introduced.
'acpi-bridge-hotplug' turns on the following command line option to
qemu for x86 guests:
(pc): -global PIIX4_PM.acpi-pci-hotplug-with-bridge-support=<off|on>
(q35): -global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=<off|on>
This change also adds the required qemuxml2argv unit tests in order to
test correct qemu arguments. Unit tests have also been added to test
qemu capability validation checks as well as checks for using this
option with the right architecture.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
This change introduces a new libvirt sub-element <pci> under
<features> that can be used to configure all pci related features.
Currently the only sub-sub element supported by this sub-element is
'acpi-bridge-hotplug' as shown below:
<features>
<pci>
<acpi-bridge-hotplug state='on|off'/>
</pci>
</features>
The above option is only available for the QEMU driver, for x86 guests
only. It is a global option, affecting all PCI bridge controllers on
the guest.
The 'acpi-bridge-hotplug' option enables or disables ACPI hotplug
support for cold-plugged pci bridges. Examples of bridges include the
PCI-PCI bridge (pci-bridge controller) for pc (i440fx) machinetypes,
or PCIe-PCI bridges and pcie-root-port controllers for q35
machinetypes.
For pc machinetypes in x86, this option has been available in QEMU
since version 2.1. Please see the following changes in qemu repo:
9e047b982452c6 ("piix4: add acpi pci hotplug support")
133a2da488062e ("pc: acpi: generate AML only for PCI0 devices if PCI
bridge hotplug is disabled")
For q35 machinetypes, this was introduced in QEMU 6.1 with the
following changes in qemu repo:
(a) c0e427d6eb5fef ("hw/acpi/ich9: Enable ACPI PCI hot-plug")
(b) 17858a16950860 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on
Q35")
The reasons for enabling ACPI based hotplug for PCIe (q35) based
machines (as opposed to native hotplug) are outlined in (b). There are
use cases where users would still want to use native
hotplug. Therefore, this config option enables users to choose either
ACPI based hotplug or native hotplug for bridges (for example for pcie
root port controller in q35 machines).
Qemu capability validation checks have also been added along with
related unit tests to exercise the new conf option.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
qemu added support for i440fx specific global boolean flag
PIIX4_PM.acpi-pci-hotplug-with-bridge-support
around version 2.1. This flag is enabled by default. When disabled, it
turns off acpi pci hotplug for cold plugged pci bridges in i440fx
machine types.
Very recently, in qemu version 6.1, the same global option was also
added for q35 machine types as well.
ICH9-LPC.acpi-pci-hotplug-with-bridge-support
This option turns on or off acpi based hotplug for cold plugged pcie
bridges like pcie root ports. This flag is also enabled by
default. Please refer to the following qemu changes:
c0e427d6eb5fef ("hw/acpi/ich9: Enable ACPI PCI hot-plug")
17858a16950860 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35")
This patch adds the corresponding qemu capabilities in libvirt. For
i440fx, the capability is detected as
QEMU_CAPS_PIIX_ACPI_HOTPLUG_BRIDGE. For q35, the capability is
detected as QEMU_CAPS_ICH9_ACPI_HOTPLUG_BRIDGE.
Please note that the test specific qemu capabilities .replies files
has already been updated as a part of regular refreshing them when a
new qemu version is released. Hence, no updates to those files are
required.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
When a server decides to close a client, the
virNetServerClientCloseLocked() is called. In here various
cleanup steps are taken, but the most important part (from this
commit's POV at least) is the way that the socket is closed.
Firstly, removal of the socket associated with the client from
the event loop is signalized and then the socket is unrefed. The
socket is not closed just yet though, because the event loop
holds a reference to it. This reference will be freed as soon as
the event loop wakes up and starts issuing callbacks (in this
case virNetSocketEventFree()).
So far, this is how things usually work. But if the daemon
reaches the number of opened files limit, things start to work
differently.
If the RLIMIT_NOFILE limit is reached and there's a client that
wants to connect then the event loop wakes up, sees POLLIN on the
socket and calls virNetServerServiceAccept() which in turn calls
virNetSocketAccept(). But because of the limit, accept() fails
with EMFILE leaving the POLLIN event unhandled. The dispatch then
continues to next FDs with events on them. BUT, it will NOT call
the socket removal callback (virNetSocketEventFree()) because it
has low priority (G_PRIORITY_DEFAULT_IDLE). Per glib's
documentation:
* Each event source is assigned a priority. The default priority,
* %G_PRIORITY_DEFAULT, is 0. Values less than 0 denote higher priorities.
* Values greater than 0 denote lower priorities. Events from high priority
* sources are always processed before events from lower priority sources.
and per g_idle_add() documentation:
* Adds a function to be called whenever there are no higher priority
* events pending to the default main loop. The function is given the
* default idle priority, %G_PRIORITY_DEFAULT_IDLE.
Now, because we did not accept() the client we are constantly
seeing POLLIN on the main socket and thus the removal of the
client socket won't ever happen.
The fix is to set at least the same priority as other sources,
but since we want to just close an FD, let's give it the highest
priority and call it before handling other events.
This issue can be easily reproduced, for instance:
# ulimit -S -n 40 (tweak this number if needed)
# ./src/libvirtd
from another terminal:
# for ((i=0; i<100; i++)); do virsh list & done; virsh list
The last `virsh list` must not get stuck.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2007168
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
With cgroup v1 I'm seeing LXC container startup failures:
$ sudo virt-install --connect lxc:/// --name test-container --memory 128
--boot init=/bin/sh
Starting install...
ERROR error from service:
GDBus.Error:org.freedesktop.machine1.NoMachineForPID: PID 2145047 does
not belong to any known machine
libvirt 7.0.0 works but 7.1.0+ does not. The root error seems to predate
that, showing up in syslog, but commit 9c1693eff made it fatal:
commit 9c1693eff4
Author: Pavel Hrdina <phrdina@redhat.com>
Date: Fri Feb 5 16:17:35 2021 +0100
vircgroup: use DBus call to systemd for some APIs
The error comes from virSystemdGetMachineByPID. The PID that shows up in
the above error message does not match the leader PID as reported by
machinectl.
This change fixes the error. Things seem to continue to work with
cgroupsv2 after this change.
https://gitlab.com/libvirt/libvirt/-/issues/182
Tested-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
virt-host-validate checks if AMD SEV is enabled by verifying
/sys/module/kvm_amd/parameters/sev is set to '1'. On a system
running kernel 5.13, the parameter is reported as 'Y'. To be
extra paranoid, add a check for 'y' along with 'Y' to complement
the existing check for '1'.
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1188715
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Other devices (includes 9p-based fsdev) call this wrapper
before formatting the device.
Add it here too.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reconstruct the socket path from priv->libDir in every user.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The mocked path in the test suite is not in sync with what libvirtd
generates.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Intended as a replacement for qemuVirtioFSCreateSocketFilename,
to be used outside of qemu_virtiofs.c
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The commit adding the vhost-user-fs device forgot to format
the device's alias on the command line.
Thankfully it was not needed yet because virtiofs migration
is not yet supported, but it will be needed in the future
to allow hot(un)plug.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are few places where we can replace explicit
VIR_FORCE_CLOSE() with VIR_AUTOCLOSE annotation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Currently the order of virshXXXFree functions in the header file
does not correspond to the order in the corresponding .c file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
In case when libvirt runs inside a restricted container it may
not have enough permissions to modify unpriv_sgio. However, it
may have been set beforehand by sysadmin or an orchestration
tool. Therefore, let's check whether the currently set value is
the one we want and if it is refrain from writing to the file.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2010306
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The --nvram and --keep-nvram options of the undefine command can
be used regardless of the domain status (the only consumer so far
- qemuDomainUndefineFlags() doesn't care about the domain
status). Yet, their corresponding help strings say something
about inactive domains while manpage says nothing. Remove the
reference to domain state.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2007659
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The capability name piix4-acpi-root-hotplug-en is not conventional and
appreared to be confusing to some. "en" suffix is also incorrect as the
capability in qemu is used to both enable and disable hotplug on the pci root
bus on the i440fx. Hence, rename it to piix4.acpi-root-pci-hotplug so that it
is clearer, less confusing and more accurate.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
Also introduces a G_DEFINE_AUTOPTR_CLEANUP_FUNC for virCHMonitor.
Signed-off-by: William Douglas <william.douglas@intel.com>
Reviewed-by: Laine Stump <laine@redhat.com>
In virCHMontiorNew the monitor object was referenced an additional
time incorrectly preventing it from being disposed of, and wasn't
always closed properly on failure.
Signed-off-by: William Douglas <william.douglas@intel.com>
Reviewed-by: Laine Stump <laine@redhat.com>
In virCHMonitorBuildKernelRelatedJson there are two cases of json
value objects being lost after the pointer being redefined. This
change removes the needless redefinition.
Signed-off-by: William Douglas <william.douglas@intel.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The indentation of the first item under the categoty "new features" for the
future release v7.9.0 is not right. Fix it.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This patch makes the descriptions of virStoragePoolCreateFlags annotate to the
correct flag in the generated HTML file.
Signed-off-by: Robin Lee <cheeselee@fedoraproject.org>
A new 'target' subelement of the pci-root controller has been
introduced having a 'hotplug' property. This property can be used to
turn off or turn on the ability to hotplug/unplug devices to the slots
of the pci-root.
The new element can be used like this:
<controller type='pci' model='pci-root'>
<target hotplug='off'/>
</controller>
This will turn off hotplug capability on the pci-root ports. To turn
the capability on, we set hotplug='on' above (which is also the
default).
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This change adds qemu backend command line support for enabling or disabling
hotplug on the pci-root controller using the 'target' sub-element of the
pci-root controller as shown below:
<controller type='pci' model='pci-root'>
<target hotplug='off'/>
</controller>
'<target hotplug='off/on'/>' is only valid for pc (i440fx-based x86)
machinetypes and turns on the following command line option that is passed
to qemu for x86 guests:
-global PIIX4_PM.acpi-root-pci-hotplug=<off/on>
Before introduction of this attribute, hotplug was always enabled for
pci-root of an i440fx-based machinetype, and since its introduction
the default setting has always been "on" for those machinetypes.
This change also adds the required qemuxml2argv unit tests in order to test
correct qemu arguments. Unit tests have also been added to test qemu capability
validation checks.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This change introduces libvirt xml support to enable/disable hotplug on the
pci-root controller. It adds a 'target' subelement for the pci-root controller
with a 'hotplug' property. This property can be used to enable or disable
hotplug for the pci-root controller. For example, in order to disable hotplug
on the pci-root controller, one has to use set '<target hotplug='off'>' as
shown below:
<controller type='pci' model='pci-root'>
<target hotplug='off'/>
</controller>
'<target hotplug='on'>' option would enable hotplug for pci-root controller.
This is also the default value. This option is only available for pc machine
types and is applicable for qemu/kvm accelerator only.This feature was
introduced from qemu version 5.2 with the following change in qemu repository:
3d7e78aa7777f ("Introduce a new flag for i440fx to disable PCI hotplug on the root bus")
The above qemu commit describes some reasons why users might to disable hotplug
on PCI root buses.
Related unit tests to exercise the new conf option has also been added.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The following change in qemu added support for a global boolean flag specific
to i440fx machines that would turn off or on acpi based hotplug for pci root
bus:
3d7e78aa7777f ("Introduce a new flag for i440fx to disable PCI hotplug on the root bus")
The option is passed as "-global PIIX4_PM.acpi-root-pci-hotplug=on" etc in qemu
commandline. It is enabled by default. This patch adds the corresponding qemu
capabilities in libvirt as QEMU_CAPS_PIIX_ACPI_ROOT_PCI_HOTPLUG.
Please note that the test specific qemu capabilities .replies files has already
been updated as a part of regular refreshing them when a new qemu version is
released. Hence, no updates to those files are required.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
This commit adds new memorydevices.rst page which should serve
all models of memory devices. Yet, I'm documenting virtio-mem
quirks only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
New 'update-memory-device' command is introduced which aims on
making it user friendly to change <memory/> device. So far I just
need to change <requested/> so I'm introducing --requested-size
only; but the idea is that this is extensible for other cases
too. For instance, want to change <myElement/>? A new
--my-element argument can be easily introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuDomainSetMemoryFlags() allows for memballoon
(<currentMemory/>) changes for both active and inactive guests.
And just before doing any change, we have to make sure that the
new size is not greater than the total memory (<memory/>).
However, the total memory includes not only the regular guest
memory, but also sum of maximum sizes of all virtio-mems (in fact
all memory devices for that matter). But virtio-mem devices are
modified differently (via virDomainUpdateDevice()) and thus the
upper limit for new balloon size has to be lowered.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reporting how much memory is exposed to the guest happens under
<currentMemory/> which is taken from def->mem.cur_balloon. The
reported amount should account for both balloon size and the sum
of @currentsize of all virtio-mems. For instance, if domain has
4GiB via balloon and additional 2GiB via virtio-mem, then the
domain XML should report 6GiB. The same applies for domain
statistics.
The way to achieve this is to account for either balloon or
virtio-mem when the size of the other is changed, e.g. on balloon
change we have to add all @currentsize (for non virtio-mem these
will be zero, so the check for memory model is needless, but
makes it more obvious what's happening), and vice versa.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the QEMU driver restarts it loses the track of the current size
of virtio-mem (because it's runtime type of information and thus
not stored in XML) and therefore, we have to refresh it when
reconnecting to the domain monitor.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As advertised in previous commit, this event is delivered to us
when virtio-mem module changes the allocation inside the guest.
It comes with one attribute - size - which holds the new size of
the virtio-mem (well, allocated size), in bytes.
Mind you, this is not necessarily the same number as 'requested
size'. It almost certainly will be when sizing the memory up, but
it might not be when sizing the memory down - the guest kernel
might be unable to free some blocks.
This current size is reported in the domain XML as an output
element only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function will be needed in the next commit where we will
want to find virtio-mem given its alias by QEMU on the monitor.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virtio-mem has another property that isn't exposed yet:
current size exposed to the guest. Please note, that this is
different to <requested/> because esp. on sizing the memory
down guest may refuse to release some blocks. Therefore, let's
have another size to report in the XML. But because of its
nature, the <current/> won't be parsed and is report only (for
live XMLs).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Updating offline XML of <memory/> devices might come handy when
dealing with virtio-mem devices. But it's implemented to just
replace one virDomainMemoryDef with another so it can be used to
change almost anything.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As advertised in one of previous commits, we want to be able to
change 'requested-size' attribute of virtio-mem on the fly. This
commit does exactly that. Changing anything else is checked for
and forbidden.
Once guest has changed the allocation, QEMU emits an event which
we will use to track the allocation. In the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Nothing special is happening here. All important changes were
done when for 'virtio-pmem' (adjusting the code to put virtio
memory on PCI bus, generating alias using
qemuDomainDeviceAliasIndex(). The only bit that might look
suspicious is no prealloc for virtio-mem. But if you think about
it, the whole purpose of this device is to change amount of
memory exposed to guest on the fly. There is no point in locking
the whole backend in memory.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virtio-mem is paravirtualized mechanism of adding/removing
memory to/from a VM. A virtio-mem-pci device is split into blocks
of equal size which are then exposed (all or only a requested
portion of them) to the guest kernel to use as regular memory.
Therefore, the device has two important attributes:
1) block-size, which defines the size of a block
2) requested-size, which defines how much memory (in bytes)
is the device requested to expose to the guest.
The 'block-size' is configured on command line and immutable
throughout device's lifetime. The 'requested-size' can be set on
the command line too, but also is adjustable via monitor. In
fact, that is how management software places its requests to
change the memory allocation. If it wants to give more memory to
the guest it changes 'requested-size' to a bigger value, and if it
wants to shrink guest memory it changes the 'requested-size' to a
smaller value. Note, value of zero means that guest should
release all memory offered by the device. Of course, guest has to
cooperate. Therefore, there is a third attribute 'size' which is
read only and reflects how much memory the guest still has. This
can be different to 'requested-size', obviously. Because of name
clash, I've named it 'current' and it is dealt with in future
commits (it is a runtime information anyway).
In the backend, memory for virtio-mem is backed by usual objects:
memory-backend-{ram,file,memfd} and their size puts the cap on
the amount of memory that a virtio-mem device can offer to a
guest. But we are already able to express this info using <size/>
under <target/>.
Therefore, we need only two more elements to cover 'block-size'
and 'requested-size' attributes. This is the XML I've came up
with:
<memory model='virtio-mem'>
<source>
<nodemask>1-3</nodemask>
<pagesize unit='KiB'>2048</pagesize>
</source>
<target>
<size unit='KiB'>2097152</size>
<node>0</node>
<block unit='KiB'>2048</block>
<requested unit='KiB'>1048576</requested>
</target>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</memory>
I hope by now it is obvious that:
1) 'requested-size' must be an integer multiple of
'block-size', and
2) virtio-mem-pci device goes onto PCI bus and thus needs PCI
address.
Then there is a limitation that the minimal 'block-size' is
transparent huge page size (I'll leave this without explanation).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability tracks whether memory-backend-* supports .reserve
attribute which is going to be important for backends associated
with virtio-mem devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This commit introduces a new capability that reflects virtio-mem-pci
device support in QEMU:
QEMU_CAPS_DEVICE_VIRTIO_MEM_PCI, /* -device virtio-mem-pci */
The virtio-mem-pci device was introduced in QEMU 5.1.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
New virHostMemGetTHPSize() is introduced which allows caller to
obtain THP PMD (Page Middle Directory) size, which is equal to
the minimal size that THP can use, taken from kernel doc
(Documentation/admin-guide/mm/transhuge.rst):
Some userspace (such as a test program, or an optimized memory allocation
library) may want to know the size (in bytes) of a transparent hugepage::
cat /sys/kernel/mm/transparent_hugepage/hpage_pmd_size
Since this size depends on the host architecture and the kernel
it won't change whilst libvirtd is running. Therefore, we can use
virOnce() and cache the value. Of course, we can be running under
kernel that has THP disabled or has no notion of THP at all. In
that case a negative value is returned to signal error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two variables that are used only in a single
loop. Move their definitions into their respective blocks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When parsing CPU topology, which is described in <topology/>
attributes we can use virXMLPropUInt() instead of virXPathUInt()
as the former results in shorter code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There is no need to use virXPathULong() and a temporary UL
variable if we can use virXPathUInt() directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Added by QEMU commit:
b96feb2cb9 "9pfs: local: Add support for custom fmode/dmode in 9ps
mapped security modes"
in 2.10.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that it's no longer used, remove probing for it
and mark it as deprecated.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Even though we only allow this option on x86,
all QEMUs report the command line option.
Added in QEMU v1.1:
6a48ffaaa7 "kvm: Activate in-kernel irqchip support"
Remove the pointless capability.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Assume the presence of the 'sandbox' option is enough,
no need to look at the parameters.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There is no QEMU we support that would need the old syntax
for -sandbox on.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It contains too many negations and conditions that are
no longer relevant now that we only support QEMU >= 2.11.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
elevateprivileges was introduced by QEMU commit:
73a1e64725 "seccomp: add elevateprivileges argument to command line"
released in 2.11.0
and later made conditional on SECCOMP support by:
9d0fdecbad sandbox: disable -sandbox if CONFIG_SECCOMP undefined
Use the existence of the sandbox option as a witness for its support.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When action for 'on_poweroff' is set to 'restart', 'fake reboot'
is triggered and qemu shutdown state is transient. Domain state
need not to be changed and events not sent in this case.
Fixes: 4ffc807214
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I removed else branches after return/break as they are not
necessary and the code looks cleaner without them.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch also includes use of an early return in case of an
error. I think the changes make the functions more readable.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If there was added a new return value indicating success to the
function virDomainMigrateSetMaxDowntime() in the future, because
of the way the function is called it would be treated it as an
error state and would return false (indicating failure). This
patch fixes it, so that the call of the function follows the same
pattern as is currently set in libvirt.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When building with "CC=clang", "-Db_sanitize=address,undefined", and
"-Dbuildtype=debug", the following error occurs:
../src/conf/nwfilter_conf.c:2190:1: error: stack frame size of 10616
bytes in function 'virNWFilterRuleDefFixup' [-Werror,-Wframe-larger-than=]
virNWFilterRuleDefFixup(virNWFilterRuleDef *rule)
^
1 error generated.
Enforcing stack frame only makes sense on normal builds when stack usage
is deterministic.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Both function description and function itself mention check for
OOM which can't happen really. There was a bug in glib where
g_strdup_*() might have not aborted on OOM, but we have our own
implementation when dealing with broken glib (see
vir_g_strdup_printf()). Therefore, checking for OOM is redundant
and can never be true.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit b5e8db8f14 tuned the SPEC file so that libvirt daemons restart
on package upgrade. In order to do that it added a bunch of
parametrized macros using the %global directive. This caused a problem
when running RPM builds on CentOS Stream 8 resulting in:
error: Too many levels of recursion in macro expansion. It is likely
caused by recursive macro declaration.
error: Macro %libvirt_daemon_perform_restart failed to expand
error: line 1275: %global libvirt_daemon_perform_restart() \
if test %libvirt_daemon_needs_restart %1 \
then \
/bin/systemctl try-restart %1.service >/dev/null 2>&1 || : \
fi \
%libvirt_daemon_finish_restart %1
There are 2 important differences between %global and %define
directives:
1) %define is local-only and does have scope - in reality though, its
scope is apparently not really enforced because it behaves exactly
the same way as %global
2) %define is evaluated at the time of use while %global is evaluated
at the time of definition
The latter and the fact the macro is parametrized is the reason why the
RPM builds fails on CentOS. Strangely enough this only happens on
CentOS Stream, but not Fedora (which is also the main proponent of
replacing %define with %global). Anyhow, replacing %global with %define
makes the rpmbuild to pass on both and along with package upgrades.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU added the capability to disable file transfers via spice in commit
5ad24e5f3b ("spice: Add -spice disable-agent-file-transfer cmdline
option (rhbz#961850)") released in qemu-v1.6.0 and the option can't be
disabled.
Remove the unnecessary validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As with previous test replace the fake caps versions with a combination
of DO_TEST_CAPS_VER(..., "2.11.0") and DO_TEST_CAPS_LATEST().
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the code is refactored add the DO_TEST_CAPS_LATEST versions as
promised in the commit adding the pinned versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemu versions now use the new commandline parser
functions, thus we can remove the old-style commandline generator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the 3 unix socket tests with real caps versions to demonstrate
that supported qemus no longer use the old syntax.
DO_TEST_CAPS_LATEST versions will be added later.
This also removes duplicate invocation of 'graphics-vnc-socket'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The switch to QemuOpts parser which brought the long-form options
happened in qemu commit 4db14629c3 ("vnc: switch to QemuOpts, allow
multiple servers") released in v2.3.0.
We can always assume this capability and remove the old-style
generators.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuDomainSecretGraphicsPrepare' always populates 'gfxPriv->tlsAlias'
when 'cfg->vncTLS' is enabled.
This means we can remove the fallback code setting up TLS for vnc via
the 'x509=' parameter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'tls-creds-x509' object is always registered even when qemu is built
without gnutls for all supported qemu versions. This means we cannot
probe for its support and thus simplify the code using TLS.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the fake caps invocation with invocation binding it to the
oldest supported qemu version.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to auto-generate more of the language binding code, it is
desirable to know what libvirt version an API was introduced in.
We can extract this information from the .syms files and expose
it in the API description
eg instead of
<function name='virNodeNumOfDevices' file='libvirt-nodedev'
module='libvirt-nodedev'>
we now have
<function name='virNodeNumOfDevices' file='libvirt-nodedev'
module='libvirt-nodedev' version='0.5.0'>
This will benefit this proposal:
https://gitlab.com/libvirt/libvirt-go-module/-/merge_requests/7
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The filesystem commandline doesn't differ in the '-latest' cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real caps instead of fake caps for the legacy cases. This will also
show us when we can remove the old-style code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modern QEMUs don't support the machine type at all. Remove it from our
fake caps generator too and adjust test cases which depend on it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
An update to the machine type was necessary as 's390-ccw' is no longer
supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real caps. The flooppy device still is forbidden for ppc64.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For backend related tests we need to cover the pre-blockdev and
post-blockdev era, so the fake-capability test is converted to a
combination of DO_TEST_CAPS_VER(..., "4.1.0") and DO_TEST_CAPS_LATEST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case fails in pre-blockdev scenarios as it would pass RBD
parameters behind our back but succeeds after as we pass it in JSON form
which doesn't have that defect.
Cover both cases instead of the fake-caps version.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the iSCSI disk path in one of the disks of the 'disk-cache' test as
it's the only specialty of 'disk-iscsi' case and remove the now
pointless files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the contents of 'disk-network-iscsi-modern' into 'disk-network-iscsi'
to reuse the name and also invocation with real capablities and remove
the leftovers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Cases for covering disk frontend properties can be converted to
DO_TEST_CAPS_LATEST without any need for intermediate capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all the disk-related negative cases to use 'latest'
capabilities. The checks are mostly related to validation so using
real capabilities doesn't influence the outcome.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In effor to convert all test cases to real capability testing, this
test doesn't make sense any more as even the oldest QEMU supported
supports USB storage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently we no longer support qemus which would miss the necessary
capability, thus the test can't be converted to DO_TEST_CAPS_LATEST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Many disk-related test case have both a fake capability version and one
tied to qemu-2.12. Remove all of those fake caps tests as we have
coverage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There were a few disk-related test cases spread around in the test
invocation calls. Move them together with disk tests and move one
irrelevant case away from the disk test block.
Note that there are still a few tests having 'disk' in the name but they
belong to different groups mostly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When looking up the 'latest' caps they might not be present. Report an
error instead of crashing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Failure of 'testQemuInfoInitArgs' jumps over the initialization of
'monitor_chr' via memset, which leads to a crash.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit a50c473ad6 removed last use of 'cfg' from
qemuDomainMemoryPeek and qemuDomainScreenshot triggering a compile time
warning.
Fixes: a50c473ad6
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
testIOThreadAdd tests iothreadinfo and iothreadadd
testIOThreadDel tests iothreadinfo and iothreaddel
testIOThreadSet tests domstats and iothreadset
testIOThreadPin tests iothreadadd, iothreadinfo and iothreadpin
Above tests should cover the IOThreads related APIs for test driver
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce testDomainGetStatsIOThread to add support for
testConnectGetAllDomainStats to get IOThread infos.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Implement virConnectGetAllDomainStats in a modular way just like QEMU
driver, though remove some params in GetStatsWorker that we don't need
in test driver currently.
Only add the worker to get state so far, more worker will be added
in the future.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If we use test driver on different machines, and use 0 as bitmap_size
for virDomainDriverGetIOThreadsConfig(), we would get different results for
the `CPU Affinity`, because it's depending on the host CPU's bitmap. In
order to get a stable result for testing, use result of
virDomainDefGetVcpus() as bitmap_size instead.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test driver can share the same code with qemu driver when implement
testDomainGetIOThreadsConfig, so extract it for test driver to use.
Also add a new parameter `bitmap_size` to the function, it's used for
specifying the bitmap size of the bitmap to generate, it would be helpful
for test driver or some special situation.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce testDomainChgIOThread at the same time, could be used for
virDomainDelIOThread etc.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce testIOThreadInfo to store IOThread infos: iothread_id,
poll_max_ns, poll_grow and poll_shrink for future usage.
Add an example of IOThread configuration to testdomfc4.xml, we also want
to generate default testIOThreadInfo for the IOThread configured in the
xml, so introduce testDomainGenerateIOThreadInfos, the values are taken
from QEMU.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test driver can share the same code with qemu driver when implement
testDomainAddIOThreadCheck and testDomainDelIOThreadCheck, so extract
them for test driver to use.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 6bcf25017b ("virDomainMemoryPeek API") introduced memory peek
and commit 9936aecfd1 ("qemu: Implement the driver methods")
introduced screenshot. Both of them will put temporary files in
/var/cache/libvirt/qemu, and the temporary files are created by QEMU.
Therefore, the ownership of /var/cache/libvirt/qemu should be changed to
user and group configured in qemu.conf to make sure that QEMU process
can create and write files in the cache directory.
Libvirt will only put the temporary files in /var/cache/libvirt/qemu
until commit cbde35899b ("Cache result of QEMU capabilities
extraction"), which will put the cache of QEMU capabilities in
'capabilities' subdir of the cache directory. Because the capabilities
is used by libvirt, the ownership of both 'capabilities' subdir and
capabilities files are root. However, when QEMU process runs as a
regular user (e.g. qemu user), the ownership of /var/cache/libvirt/qemu
will be changed to qemu:qemu while that of
/var/cache/libvirt/qemu/capabilities will be still root:root. Then the
regular user could spoof different capabilities, which maybe lead to
denial of service.
Since the previous patch has move the temp files of screenshot and
memory peek to per-domain directory, no one except domain capabilities
uses cacheDir currently. And since domain capabilities are used by
libvirtd instead of QEMU, no need to change the ownership of cacheDir to
qemu:qemu explicitly.
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The temp files of screenshot and memory peek, which are created by QEMU,
are put in the cache directory. However, the caches of domain
capabilities, which are created and used by libvirtd, are also put in
the cache directory. In order to make the cache directory more secure,
move the temp files of screenshot and memory peek to per-domain
directory.
Since the temp files are just temporary files and are only used by
libvirtd (libvirtd will delete them after use), the use of screenshot
and memory peek will be affected.
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since there's just one type left, we can change the name to a more
generic one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we've removed support for plaintext secrets qemuDomainSecretInfo
can be simplified by removing the 'type' field and merging in all the
fields from 'qemuDomainSecretAES'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It always returns true for iSCSI, so we can remove the fallback logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After removal of plaintext secrets this function is a noop.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no code which could set it any more so we can remove the
generators.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU supports the 'password-secret' parameter to pass a QCryptoSecret
since 2.9. Remove the alternate plaintext logic.
Unfortunately this had a ripple effect of removing qemuCaps from a lot
of functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The answer is now always 'true', so we can remove the function and
simplify the logic in places where it's called.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The secret object is supported since qemu-2.6 and can't be compiled out.
Assume the presence to simplify the code.
This enables the use of the secret key for most tests not using real
caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It always returns true. Make the logic a bit simpler to see through.
This completely removes 'virCryptoHaveCipher' as it's pointless in the
current form.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The currrent generated API contains *** pointer types with bogus
whitespace in the middle:
<arg name='keys' type='char ** *' info='pointer to a variable to store authorized keys'/>
because the tokenizer only tries to merge 2 distinct '*' together.
This refactors the code to merge an arbitrary number, resulting
in
<arg name='keys' type='char ***' info='pointer to a variable to store authorized keys'/>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The value of zero is valid <unique_id/> (see
virNodeDeviceGetSCSIHostCaps()) but our RNG does not think so.
Switching the type to 'unsignedInt' does allow value of zero.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A nodedev can have 'scsi_generic' capabilities but corresponding
RNG is missing. Fortunately, it's very simple - there's only one
mandatory child element <char/>.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The <type/> element for <capability type='scsi'> part of nodedev
XML is optional (see udevProcessSCSIDevice()) and as such might
not be formatted into nodedev XML (see
virNodeDeviceCapSCSIDefFormat()). Reflect this in our RNG.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, the ZFS storage backend is enabled only if both zfs
and zpool binaries were found during configure phase. This is not
consistent with our attempts to move dependencies on binaries
from compile to runtime. And also it is inconsistent with other
backends, e.g. vstorage.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now, that there is no user of $PROG_PATH macros the meson script
can be changed so that it doesn't set those macros. It's
redundant as $PROG macro contains the same value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Due to the way we detect programs at runtime there's no
difference between $PROG and $PROG_PATH macros that come from
meson-config.h. Either both are set to the path found during
configure or both are set to just "$prog", e.g.:
#define EBTABLES "/sbin/ebtables"
#define EBTABLES_PATH "/sbin/ebtables"
#define FLAKE8 "flake8"
#define FLAKE8_PATH "flake8"
Change those few places which use _PATH.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code assumes that all supported qemu versions have this capability
so we can retire it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu supports this since 81b2b81062 ("fw_cfg: insert fw_cfg file blobs
via qemu cmdline") released in qemu-v2.4.0 and it can't be compiled out.
Assume that the option always works and remove the corresponding check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Added to 'query-command-line-options' in qemu commit 5559716c98
("util/qemu-config: Add loadparm to qemu machine_opts") released in
qemu-v2.10.0 but makes sense for s390 only. Treat it the same as the
keywrap capabilities in previous commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu introduced these options in 2eb1cd0768 ("s390x: CPACF: Handle key
wrap machine options") released in qemu-v2.3.0 but was exposed in
query-command-line-options only in 5bcfa0c543 ("util/qemu-config: fix
missing machine command line options").
The problem is that they are exposed even for architectures which don't
actually in fact support those.
Make the two capabilities a bit more useful by assuming them only on
s390 and thus removing them from other arches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code assumes that the feature tracked by this capability always
exists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Supported since qemu commit 8490fc78e7 ("add -machine mem-merge=on|off
option") released in qemu-v1.3.0 and can't be compiled out.
Assume that it's present and remove the validation code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code assumes that the feature tracked by this capability always
exists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Supported since qemu commit 3d3b8303c6 ("showing a splash picture when
start") released in qemu-v1.0 and can't be compiled out.
Assume that it's present and remove the validation code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The feature is now always present. Remove the negative test case as the
upcomming commit will remove the checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code assumes that the feature tracked by this capability always
exists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Supported since ac05f34924 ("add a boot parameter to set reboot
timeout") released in qemu-v1.3.0 and can't be compiled out.
Assume that it's present and remove the validation code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemu versions now support this feature so this test is
pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Added by c8a6ae8bb9 in qemu-v1.5.0 and can't be compiled out. Assume
that it's present and fix all fake-caps tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_autofree for the JSON values to remove cleanup label and ret
variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Of the two callers one simply iterates over the returned paths and the
second one appends the returned paths to another linked list. Simplify
all of this by directly returning a linked list.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two distinct uses of an arbitrary buffers size when querying
the device mapper. One is related to loading the /proc/devices file,
while the other is used as buffer for ioctls to the devmapper.
Split up the macros used here so that it's clear that they are not meant
for the same thing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The option "queue-size" in virtio-blk was added in qemu-2.12.0, and
default value increased from qemu-5.0.0.
However, increasing this value may lead to drop of random access
performance.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
To support virtio-blk queue-size option, this commit adds capability
detection to the option.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The option "queue-size" for virtio-blk was added in qemu-2.12.0, and
default value increased from qemu-5.0.0.
However, increasing this value may lead to drop of random access
performance.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
virtio-blk num-queue is visible to guest OS, so this must be kept while
live migration.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently disk-virtio-queues test is now using specifying a fake
capability.
By this commit this test will make use of DO_TEST_CAPS_LATEST.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Let's check whether a boolean --option doesn't have completer or
completer_flags set. These options are just flags and don't
accept any value, thus they can't have any completer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a command is an alias, then it can only have .name, .flags and
.alias set and .flags should contain just VSH_CMD_FLAG_ALIAS.
Check if that's the case in self-test.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The vol-download command takes mandatory --file argument which
points to a local (possibly non-existent) path. If the file
exists then it's overwritten. Set the argument's completer so
that self-test doesn't report it as missing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The screenshot command takes optional --file argument which can
point to an existing local path (in which case the file is
overwritten). Set the argument's completer so that self-test
doesn't report it as missing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We previously had a 'rules:' entry that caused a job to be skipped if
the variable "TEMPORARILY_DISABLED" was set. This is no longer needed
since we can set a similar flag in ci/manifest.yml and re-generate
to temporarily skip a job.
Unfortunately the 'rules:' entry had an unexpected side-effect on
the pipelines that was never previously noticed. Instead of only
running pipelines on push, the mere existance of the 'rules:' entry
caused triggering of pipelines on merge requests too.
The newly auto-generated ci/gitlab.yml file does not have a 'rules:'
for the container job template, and thus only runs on git push.
The result is that build jobs try to run on merge requests and the
container jobs they depend on don't exist. This breaks the entire
pipeline with a message that the config is invalid due to broken
job dependencies.
This fixes a regression introduced in
commit ccc7a44adb
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Sep 9 14:49:01 2021 +0100
ci: re-generate containers/gitlab config from manifest
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch includes:
* removal of dead code
* simplifying nested if conditions
* removal of unnecessary variables
* usage of "direct" boolean return
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's now also used in vshCompleteHelpCommand which is outside of the
conditionally compiled code.
Fixes: 80f70c74a7
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Complete with the indexed targets (e.g. vda[3]) based on existing
indexes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now this serves just as an annotation because readline and also the
bash completion script insist on completing local paths when an empty
list is returned.
This will serve for future reference once we'll be able to properly
refuse to suggest anything.
The completer is used for fields such as names for new objects,
description strings, password strings etc, URIs and hostnames which we
can't feasibly autocomplete.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now the completion does the correct thing of completing a local path
if NULL is returned.
Introduce 'virshCompletePathLocalExisting' and use it in the
'VIRSH_COMMON_OPT_FILE' macro.
This for now serves as an annotation for the function which want to read
a file on the host running virsh. In the future this can be used with a
more sophisticated implementation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In cases such as the APIs for managed save management, the file path
provided via the '--file' option is passed to the API.
We'll need to make them distinct from cases for when virsh is using the
file so that different completers can be used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'--storage' of the 'undefine' command and '--migrate-disks' of the
'migrate' command take a list of disk targets as an argument.
We can simply combine 'virshDomainDiskTargetCompleter' with
'virshCommaStringListComplete' to provide the completions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Wrap 'vshReadlineCommandGenerator' into a function with proper prototype
to provide a completer for the help command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'--pool' of the 'pool-event' command and '--inputpool' of
'vol-create-from' use the above mentioned completer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When listing a snapshot tree, the '--from' option takes a name of a
snapshot to limit the subset. Use virshSnapshotNameCompleter as
completer for the option.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Make it simple to spot which options of which commands are missing
autocompletion functions by introducing this hidden option.
In the future when we'll have completers for everything this can be also
used as a hard fail so that completers are always added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We don't need to validate the real command twice, but it's better to
check that the real command name exists and it's not an alias to prevent
loops.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a proper flag 'VSH_CMD_FLAG_HIDDEN' for hiding commands from
output so that we can validate that there aren't any loops or
misconfigured commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Prevent the need to edit the function declarations to put them into the
header. There was even inconsistent use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Include the proper header instead of duplicating the declaration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add up-to-date information about creating and defining mediated devices
in libvirt.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Bring the documentation for nodedev-list up to date with the latest
code, especially documenting the --active and -all options.
Also add documentation for the nodedev-define, nodedev-undefine, and
nodedev-start commands.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By doing so we can get rid of the code which violates our coding style
guidelines.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
I added new driver functions to handle creating network with
given flags. I also replaced definitions of the functions without
flags with function calls to the new ones.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This new API creates network with given flags.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The ACPI index of a device in a running guest can't be modified, and
libvirt doesn't actually attempt to modify it, but it was possible for
a user to request such a modification, and libvirt wouldn't complain,
thus misleading the user into thinking that it had actually been changed.
Resolves: https://bugzilla.redhat.com/1998920
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The next patch will add another check similar to the existing check
for a change in alias name. This patch reformats the code in
preparation so that the next patch's purpose will be clear.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I think these functions look much more readable with just simple
if conditions.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case the specific VCPU states are not present in the XML we were
taking a fallback code path just noting that all cpus of the VM are
enabled.
This was broken by a mistake in a recent refactor where a 'goto cleanup'
was mistakenly replaced by a 'return NULL'. This broke reporting of cpus
and also caused a memory leak.
Return the fallback cpu map.
Fixes: bd1f40fe7d
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2004429
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
In fact keeping the VM around for debugging is a desirable configuration
and actually the implementation has no code as we keep the VM around.
Remove the validation and add a note that it's actually used.
Fixes: b1b85a475f
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
These are no longer referenced by any existing test as of:
os-firmware-invalid-type -> a9b1375d7d
tseg-explicit-size -> 604990a175
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Launch swtpm(8) with the --terminate switch, which guarantees that
the daemon will shut itself down when QEMU dies (current behavior).
We had so far been getting this "for free" (i.e. without --terminate)
due to a defect in upstream's connection handling logic [1], on which
libvirt should not rely since it will eventually be fixed. Adding
--terminate preserves and guarantees the current behavior.
[1] https://github.com/stefanberger/swtpm/pull/509
Signed-off-by: Nick Chevsky <nchevsky@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The array of virtual functions @vfs in
virNodeDeviceGetPCISRIOVCaps() is allocated twice: the first time
during its declaration and the second time inside
virPCIGetVirtualFunctions() which leads to a memleak:
==16691== 1,128 bytes in 47 blocks are definitely lost in loss record 1,771 of 1,803
==16691== at 0x4844CC1: calloc (vg_replace_malloc.c:1117)
==16691== by 0x4E50070: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6800.3)
==16691== by 0x4A7B034: virNodeDeviceGetPCISRIOVCaps (node_device_conf.c:2649)
==16691== by 0x4A7B5E2: virNodeDeviceGetPCIDynamicCaps (node_device_conf.c:2762)
==16691== by 0xA7F6E18: udevProcessPCI (node_device_udev.c:418)
Fixes: c97518d9b8
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When documenting our public API in some places we use '@' to
refer to the variable. For instance:
* This API tries to set guest time to the given value. The time
* to set (@seconds and @nseconds) should be in seconds relative
* to the Epoch of 1970-01-01 00:00:00 in UTC.
However, when generating HTML documentation these tokens are
copied verbatim. What we can do is drop the '@' character and
wrap the variable in <code/> so that it is formatted properly.
Due to the way we 'parse' docs a token might actually be slightly
more than just '@variable'. For instance in the example above we
will have the following tokens: '(@seconds' and '@nseconds)'.
Thus we need to handle possible substring before and after
variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is currently the only way to view the 'autostart' property for a
node device in virsh.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Implement these new API functions in the nodedev driver.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These two public APIs are implemented for almost all other objects that
have a concept of persistent definition and activatability. Now that we
have node devices (mdevs) that can be defined and inactive, it will be
useful to query the persistent/active state of node devices as well.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add ability to set node devices to autostart on boot or parent device
availability.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will allow persistent mediated devices to be configured to be
restarted automatically when the host reboots.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When libxlAutostartDomain was introduced with commit fb92307f0d, one hunk
mistakenly added a call site in libxlStateReload. Domains should not be
autostarted when reloading the driver, so remove the offending hunk.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On reload, the libxl driver calls virDomainObjListLoadAllConfigs to load
all configs from /etc/libvirt/libxl/ but incorrectly passes 'true' for
the liveStatus parameter, resulting in error messages such as
libvirtd[21053]: XML error: unexpected root element <domain>, expecting <domstatus>
libvirtd[21053]: Failed to load config for domain 'sles15sp3'
Fix by not requesting live status when re-reading the persistent VM config
files.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On Xen, libvirt runs in a VM (typically dom0) and does not have an accurate
picture of numa and cpu topology of the underlying physical machine using
the "usual" mechanisms. numa info and cpu toplogy are retrieved from libxl
and used to populate the libvirt conterparts. Commit 7b79ee2f78 introduced
support for reporting die_id in capabilities, but did not account for
special handling of numa and cpu topology in libxl.
Currently, Xen does not report die_id in the libxl_cputopology structure.
In the meantime, set die_id to 0, which was suggested by the Xen developers
and is slightly better than random garbage such as
<cpu id='1' socket_id='0' die_id='-1073069552' core_id='0' siblings='0-1'/>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The armv7l and ppc64le cross-builds as well as the Clang build
are adopted from Debian 10, while the mips64el build is adopted
from Debian sid. As always, the way jobs are distributed across
Debian versions is fairly arbitrary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The value 3 is the length of the "ci-" prefix, which is present
in the items returned by get_registry_images() but not in those
returned by get_dockerfiles().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These were removed along with the outdated information on how
to regenerate the Dockerfiles contained in the repository, but
this part is still relevant.
Reverts: 30856d2865 (partially)
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the example for <memory model='dimm'/> we show how to
configure hugepages as backend. In the example we show 4MiB
hugepages which are non-standard and thus at the first glance may
mislead users thinking that a regular sized pages (4K) will be
used. Use 2MiB as the value instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We don't need to propagate all public flags, only the information
about the presence of the validation one, which can differ from
function to function. This patch makes it easier and more
readable in case of a future additions of validation flags.
This change was suggested by Daniel.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We don't support all startup policies with all source types so to
correctly allow switching from a 'file' based cdrom with 'optional'
startup policy to a 'block' based one which doesn't support optional we
must update the startup policy field first. Obviously we need to have
fallback if the update fails.
Reported-by: Vojtech Juranek <vjuranek@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'-qmp' in this case behaves the same as '-chardev' so it should have
been converted the same way as others were in 43c9c0859f since
short options are deprecated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now use lcitool's manifest feature to generate files. The logic
for checking for stale containers in the registry, however, is still
relevant so that is propagated to a standalone command.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We now use lcitool's manifest feature to generate files.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This uses the command "lcitool manifest ci/manifest.yml" to re-generate
all existing dockerfiles and gitlab CI config.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The sanitizer jobs run in ubuntu 20.04 containers and thus overlap with
testing already done for the regular ubuntu 20.04 build job. Fold the
sanitizer run for GCC into the regular build job and add a second
ubuntu 20.04 build job for CLang sanitizers.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It was in the build stage previously to let it run in parallel with
other build jobs, but with the "needs" clause this is not required.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the documentation to virDomainAttachDevice() we refer to a
non-existent virDomainUpdateDeviceFlag() function. The correct
name is virDomainUpdateDeviceFlags().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virtiofs project started off using "virtio-fs" but later switched to
the "virtiofs" spelling because it matches the spelling of the mount -t
virtiofs command-line. Update the kbase article with the new spelling so
it matches the virtiofs website.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A number of legacy issues make the virtiofs kbase article hard to
understand. Most users don't need to configure NUMA or a memory backend
other than memfd. Move that information to the bottom of the article so
the recommended syntax is most prominent.
Suggested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Since we no longer use '-device sga' we can stop probing for this device
in our capabilities code.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
SeaBIOS >= 1.11 has built-in support for outputting to the serial
console when QEMU sets -M graphics=off. Our minimum QEMU version
is 2.11.0, which bundled SeaBIOS 1.11. Thus we have no need to
use '-device sga' anymore.
This change results in a slight layout difference for option ROMs
in memory, however, it does not affect the migration data stream
format on the wire and once migration is complete the target QEMU
memory layout for ROMs matches the source QEMU once again.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The BIOS serial console output is currently implemented using the QEMU
'sga' device, but this is going to change in future patches, so the
error message ought to be more generically phrased.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The <bios useserial='yes'> config results in use of the '-device sga'
QEMU options. This in turn causes QEMU go load the sgabios.bin option
ROM, which contains x86 machine code. This cannot work on non-x86
arches, thus we should block the bad config.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When validation like deviceValidateCallback fails, the vm will not be
set and so the call to virDomainObjListRemove will be passed a NULL
pointer causing a segfault. To prevent this add a check that the vm is
defined before calling out to virDomainObjListRemove.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Enable the handler function to find and open the console character
device that will be used by the console API.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
With the console and serial device handling fully functional, allow
the required device types to be specified in the domain
configuration.
The configuration only supports a single serial or console device.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Add functionality to allow libvirt console to connect to the
cloud-hypervisor created PTY associated with a VM by updating the
domain with console path information. This has to be run after the VM
is created by cloud-hypervisor.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Add function to build the the json structure to configure a PTY in
cloud-hypervisor.
The devices themselves still aren't allowed in configurations yet
though.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
The virCHMonitorGet function isn't going to be used outside of the
monitor, so remove the initial declaration and define the function
to be static.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Now that virCHMonitorGet is capable of handling data returned by the
cloud-hypervisor API, make use of this via virCHMonitorGetInfo to call
into the vm.info endpoint.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
The virCHMonitorGet function needed to be able to return data from the
hypervisor. This functionality is needed in order for the driver to
support PTY enablement and getting details about the VM state.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Add and initialize a virChrdevs to the _virCHDomainObjPrivate
structure in order to eventually track the consoles in use by a domain.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
There are important security implications when we'd misprobe those
images. This commit reinstates the tests removed by commit 979d1ba3ae
since 'qemu-img' refused to format them.
With the new testing approach with stored images we won't run into that
problem.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Improve the error message and abort the test. Continuing here is not
desired as without chdiring into the appropriate directory the test
would fail anyways and worse could attempt stat-ing random files on the
host.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have plenty of other work to do in this test. Skip only the real
image testing case when we can't find qemu-img or it failed to format
the image.
This allows us to also remove the last global variable in the test and
move the creation and cleanup of the images closer to the actual test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prepare the test runner for skipping individual tests if images can't be
formatted rather than the whole virstoragetest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemu versions have the parameter, so we don't need to
check. This allows us to simplify the code used for formating real
images for virstoragetest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Create it with the appropriate backing file path rather than using
another instance of 'qemu-img rebase'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For testing of real images formatted by 'qemu-img' it's now sufficient
to format them once without the need to rewrtie them since we use the
real images only for testing of one scenario.
This allows us to also remove most of the global variables holding the
path to the images which was necessary when they were being rewritten.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have 3 test cases for this currently:
1) "qcow2->raw"
1.1) VIR_STORAGE_FILE_QCOW2 as top level format
1.2) VIR_STORAGE_FILE_AUTO as top level format
2) "wrap->qcow2->raw" whith just VIR_STORAGE_FILE_QCOW2
This patch adds also testing of VIR_STORAGE_FILE_AUTO for case 2) and
removes both 1) subcases as they are being actually tested as part of
2).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use prepared test images instead to simplify and clarify the code
instead of rewriting existing images multiple times.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We've already added a 'raw' file to the example image directory so we
can use that instead of formatting one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous ones, this one doesn't need to be created by
qemu-img in order for the test to make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QED format isn't really being developed any more. Use a
pre-formatted image to test the existing code. In this instance we
switch to using a relative backing path for simplicity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't need a special directory for the tests. Reuse the directory
holding the data for the virstoragetest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Provide the images for the self and mutual backing image loop cases in
the repository rather than formatting them with qemu-img.
This makes the code more readable and also decouples the backing chain
tests from each other.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than using 'qemu-img' and rewriting the chain we can use fake
data and few empty files to ensure the same level of coverage. This is
possible since we've already tested that the metadata parsing from files
works properly and the only thing we are testing here is that the
symlink resolution works properly.
Additionally after the refactor of 'virstoragetest' is complete
additional tests on real data will be added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Passing in both "chain*" and "chain*->path" is pointless. Use only the
full struct which we can use to infer the rest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The TEST_CHAIN cases were storing the expected output (or rather data
to generate the expected output) in code. This made the code really hard
to follow and even harder to modify to add new cases.
This patch modifies the code to store the expected output in text files
(using the same generator as we've used to) and uses
'virTestCompareToFile' to check the outputs.
The result is that the code is way simpler and doesn't require fiddling
with 'testFileData' structs when adding new cases. Additionally this
removes mixing of code and declaration so we can stop disabling the
warning for this file.
Another advantage is that the tests are now named so it's easier to
figure out if one of them breaks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In certain cases we want to be able to compare test output containing
real paths against a static output file and thus we need a helper which
strips srcdir/builddir from given path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now have specific tests for the backing store parser and previous
tests cover the extraction of the backing store string so there's no
need for these particular tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now have specific tests for the backing store parser and previous
tests cover the extraction of the backing store string so there's no
need for these particular tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The domblklist command is designed to show a brief information
about the blocks of a domain. One piece of information that is
shows is "Target "and "Source". Before the modification, the
Vhost disk of SPDK is displayed as "-". After the modification,
the socket associated with it can be displayed.
Signed-off-by: dinglimin <dinglimin@cmss.chinamobile.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Cover the case of missing disk target to cover the case fixed by
previous commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The disk target is mandatory and used as a designator in error messages
of other validation steps, so we must validate it first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The code rejecting a XML when the disk target is missing was moved to
the validation code which goes after post parse. One of the cases in the
disk post parse code didn't check whether 'disk->dst' is set which at
that point isn't guaranteed.
Fixes: 61fd7174c2
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2001627
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The validation infrastructure doesn't modify the definition and
additionally it makes sense to run the global code first as it's
validating certain corner cases.
The changed error messages from qemuxml2argvtest show that this is
indeed the proper ordering as all changed messages are actually better
describing the error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
LUN disks are supported only by VMX and QEMU drivers and the VMX
implementation is a subset of qemu's implementation, thus we can move
the qemu-specific validator to the global validation code providing that
we allow the format to be 'none' (qemu driver always sets 'raw' if it's
not set) and allow disk type 'volume' as a source (qemu always
translates the source, and VMX doesn't implement 'volume' at all).
Moving the code to the global validation allows us to stop calling it
from the qemu specific validation and also deduplicates the checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduced by:
commit 17322e5518
libxl: describe host cpu features based on hwcaps
with the justification that libxl_hwcaps does not have a stable
format across all version.
Even though the code would return '0' in the case of such failure,
it frees the 'cpu' pointer, while keeping it in caps->host.
Based on that, assume it does not happen in current usage.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
As well as the code probing for the version in libxlCapsInitHost.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Remove the code handling old Xen's hwcap words,
as well as the comment describing it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Commit 345996c620 disabled the
-Wunused-but-set-variable warning on CLang, beacuse it warned
on variables that were unread, but we relied on the side effects
of their destructors.
Reinstate the warning now that all the occurrences have been fixed.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Two users of virEventGLibAddSocketWatch care about the GSource
it returns.
The other three free it by assigning it to an autofreed variable.
Mark them with G_GNUC_UNUSED to make this obvious to the reader
and the compiler.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the unlikely case that we were unable to set the new
identity, we would unref the old one even though it still
could be in the thread-local storage.
Fixes: c6825d8813
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unused as of:
commit effeee5c2f
qemu: driver: Use 'qemuDomainSaveStatus' for saving status XML
This function extracts the config from the vm object, so the caller
no longer needs to do it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reduce variable scope, use g_auto and remove pointless labels.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reduce variable scope to match their lifetime,
use g_auto and remove now pointless labels in favor
of direct returns.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use g_auto where possible and remove the pointless label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Although I'm sure we all know the powers of two by heart now,
this is the prevalent style for flag defition.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We need to validate the XML against schema if option '--validate'
was passed to the virsh command. This patch also includes
propagation of flags into the virNWFilterBindingDefParse().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We need to validate the XML against schema if option '--validate'
was passed to the virsh command. This patch also includes
propagation of flags into the virNetworkPortDefParse().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The g_strdup_printf() function can't fail really. There's no need
to check for its return value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In the previous commit I accidentally changed the mode of
qemu_driver.c file. Restore the original mode.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In process of iothread hotplug, qemuDomainHotplugAddIOThread() calls
qemuProcessSetupIOThread(). When qemuProcessSetupIOThread() returned
a failure, only the cgroup directory 'iothread' was cleaned up within
the function. Right after that qemuDomainHotplugAddIOThread() would
return failure directly without rolling back the livedef and iothread
process that created previously.
Further, when 'virsh schedinfo domain --live' requires schedinfo of
such machine, the interface will always return a failure print as
follows: 'Failed to create v1 controller cpu for group: No such file
or directory'. The reason is qemuGetIOThreadsBWLive() using member
vm->def->iothreadids[0]->iothread_id to findout the corresponding
cgroup dircetory. In case mentioned previously, iothreadids[0] was not
been cleaned up while whose cgroup directroy has already been removed.
This patch rolls back the livedef and iothread process after
qemuProcessSetupIOThread() returned a failure. Of course we are not
limited to this function, we also perform the same rolling back after
any exception proecss in qemuDomainHotplugAddIOThread().
Signed-off-by: Lei Yang <yanglei209@huawei.com>
Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Setup of a disk with <transient shareBacking='yes'/> option issues a
reset of qemu. In cases when QEMU didn't yet support the 'set-action'
QMP libvirt would in certain cases setup the commandline without
'-no-shutdown' which caused qemu to exit during startup. Forbid this
specific scenario.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Split out the logic which was used to determine whether qemu should
allow the guest OS to reboot for QEMU versions which don't support the
'set-action' QMP command.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Clang has previously had trouble with G_DEFINE_AUTOPTR_CLEANUP_FUNC
generated code, thinking it was unused. We turn off -Wunused-function
to avoid tripping up on that with CLang.
New Clang has started having trouble with g_autoptr now too. In usage
scenarios where the variable is set, but never again read, it thinks
it is unused not realizing the destructor has useful side effects.
For this we have to skip -Wunused-but-set-variable on CLang.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As of qemu commit:
commit 497a30dbb065937d67f6c43af6dd78492e1d6f6d
qemu-img: Require -F with -b backing image
creating images with backing images requires specifying the format.
Remove tests which do not pass the backing format on the command
line.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU driver uses both virtlogd and virtlockd, while the Xen driver
uses virtlockd. The libvirtd.service unit contains deps on the socket
units for these services, but these deps were missed in the modular
daemons. As a result the virtlockd/virtlogd sockets are not started
when the virtqemud/virtxend daemons are started.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In previous commit I've documented my contributions for upcoming
7.7.0 release. But unfortunately I've placed the lines into wrong
release (7.6.0).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Attaching a newly created vhostuser port to a VM fails due to an
apparmor denial
internal error: unable to execute QEMU command 'chardev-add': Failed
to bind socket to /run/openvswitch/vhu838c4d29-c9: Permission denied
In the case of a net device type VIR_DOMAIN_NET_TYPE_VHOSTUSER, the
underlying chardev is not labeled in qemuDomainAttachNetDevice prior
to calling qemuMonitorAttachCharDev.
A simple fix would be to call qemuSecuritySetChardevLabel using the
embedded virDomainChrSourceDef in the virDomainNetDef vhostuser data,
but this incurs the risk of incorrectly restoring the label. E.g.
consider the DAC driver behavior with a vhostuser net device, which
uses a socket for the chardev backend. The DAC driver uses XATTRS to
store original labelling information, but XATTRS are not compatible
with sockets. Without the original labelling information, the socket
labels will be restored with root ownership, preventing other
less-privileged processes from connecting to the socket.
This patch avoids overloading chardev labelling with vhostuser net
devices by introducing virSecurityManager{Set,Restore}NetdevLabel,
which is currently only implemented for the apparmor driver. The
new APIs are then used to set and restore labels for the vhostuser
net devices.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that resource structure can have appid as well we need to adapt code
that creates default resource partition if not provided by user.
Otherwise starting a VM with appid defined would fail with following
error:
error: unsupported configuration: Resource partition '(null)' must start with '/'
Fixes: 38b5f4faab
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Clang on Rawhide started to complain that @tmp variable in
virSCSIDeviceListDel() is set but not used. This is obviously a
false positive because the variable is used to free device stolen
from the list. Anyway, we can do without the variable so in this
specific case let's fix our code to appease Clang.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In qemumigrationcookiexmltest and qemustatusxml2xmltest there is
@cfg variable that is unused. It's set via virQEMUDriverGetConfig()
but then never used. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The virPCIDeviceIsBehindSwitchLackingACS() function checks
whether given PCI device is not behind a switch that lacks ACS.
It does so by starting at given device and traversing up, one
parent at time towards the root. The parent device is obtained
via virPCIDeviceGetParent() which allocates new virPCIDevice
structure. For freeing the structure we use g_autoptr() and a
temporary variable @tmp. However, Clang fails to understand our
clever algorithm and complains that the variable is set but never
used. This is obviously a false positive, but using a small trick
we can shut Clang up.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In cases when we are adding a <transient/> disk with sharing backend
(and thus hotplugging it) we need to re-initialize ACPI tables so that
the VM boots from the correct device.
This has a side-effect of emitting the RESET event and forwarding it to
the clients which is not correct.
Fix this by ignoring RESET events during startup of the VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When qemu supports 'set-action' command we can update what happens on
reboot. Additionally we can fully relax the checks as we now properly
update the lifecycle actions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We don't use the value of the flag when the new handling is in place so
we don't have to initialize it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The '-no-shutdown' flag prevents qemu from terminating if a shutdown was
requested. Libvirt will handle the termination of the qemu process
anyways and using this consistently will allow greater flexibility for
the virDomainSetLifecycleAction API as well as will allow using
the 'system-reset' QMP command during startup to reinitiate devices
exported to the firmware.
This efectively partially reverts 0e034efaf9
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than using '-no-reboot' use the QMP command to update the
lifecycle action of 'on_reboot'.
This will be identical to how we set the behaviour during lifetime and
also avoids problems with use of the 'system-reset' QMP command during
bringup of the VM (used to update the firmware table of disks when disks
were hotplugged as part of startup).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The RESET event is delivered by qemu only when the guest OS is actually
allowed to reboot ('-no-reboot' or equivalent is not used) and due to
the nature of async handling of the events VM is actually already
executing guest code after the reboot, until our code gets to killing
it.
In general it should have been impossible to reach a state where the
reboot action is 'destroy' but we didn't use '-no-reboot' but due to
various bugs it was.
Due to the fact that this was not a desired operation and additionally
guest code already is executing I think the best option is not to kill
the VM any more (possible data loss?) and rely for the proper fix where
we use the new 'set-action' QMP command to enable an equivalent
behaviour to '-no-reboot' during runtime.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Without the ability to tell qemu to change the behaviour on reboot of
the guest it's fundamentally unsafe to change the action as the guest
would be able to execute instructions after the reboot before libvirt
terminates it due to the async nature of QMP events.
Stricten the code for now until we implement support for 'set-action'
QMP command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Directly use 'priv->allowReboot' as we now document what the behaiour is
to avoid another lookup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The original idea was to ensure that the destination has the same
original state of the '-no-reboot' flag to ensure identical behaviour of
the 'vidDomainModifyLifecycleAction' API.
With newer qemu's we'll be able to modify the behaviour using the
monitor so old daemons won't be able to keep up anyways.
Remove this feature as it's not very useful and will be replaced by a
proper solution.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Save further readers the headache of determining what it actually does
and note that it's not used with qemu version supporting the
'set-action' command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patches will modify how '-no-reboot' is handled when qemu
supports the 'set-action' QMP command. Add a test for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If current qemu supports 'set-action' use it instead of the single-use
command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'set-action' QMP command allows modifying the behaviour when the
guest resets.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We simply terminate qemu instead of issuing a reset as the semantics of
the setting dictate.
Fix it by handling it identically to 'fake reboot'.
We need to forbid the combination of 'onReboot' -> 'destroy' and
'onPoweroff' -> reboot though as the handling would be hairy and it
honetly makes no sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver didn't ever implement any meaningful handling for the
'preserve' action.
Forbid the flag in the qemu def validator and update the documentation
to be factual.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some actions are not supported by qemu. Use the recently added
'qemuValidateLifecycleAction' helper to ensure that the API does the
same validation as we do on startup in the validation callbacks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver didn't ever implement any meaningful handling for the
'rename-restart' action.
At this point the following handling would take place:
'on_reboot' set to 'rename-restart' is ignored on guest-initiated
reboots, the guest simply reboots.
For on_poweroff set to 'rename-restart' the following happens:
guest initiated shutdown -> 'destroy'
libvirt initiated shutdown -> 'reboot'
In addition when 'on_reboot' is 'destroy' in addition to 'on_poweroff'
being 'rename-restart' the guest is able to execute instructions after
issuing a reset before libvirt terminates it. This will be addressed
separately later.
Forbid the flag in the qemu def validator and update the documentation
to be factual.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We've got multiple random open-coded versions. Switch to the helper
function which doesn't report errors as they'd be mostly wrong as the
operation was indeed successful.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The public API wrapper range-checks the arguments. Save the next reader
the hassle of looking it up.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This one will be slightly unstable given that CPU features are being
modified frequently in qemu especially when used with a modern cpu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The host model expansion depends on the capability data, so in this case
it makes sense to have specific invocations of the test for all qemu
versions we have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch to q35 in anticipation of using DO_TEST_CAPS* in further patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the larger number in the original test to avoid having two files.
Additionally this avoids use of 'host-model' with DO_TEST_CAPS_LATEST in
cases when it isn't necessary for the purpose of the test as the CPU
model tends to change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case doesn't really test anything about the specific CPU. Using
a host-model cpu with DO_TEST_CAPS_LATEST results in commandline changes
every time qemu updates the cpu definiton.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to validate the XML against schema if option '--validate'
was passed to the virsh command. This patch also includes
propagation of flags into the virStoragePoolDefParse() function.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I removed negation from the name of a variable to make the code
more readable.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
They require the caller to provide the maximum number
of array elements upfront, leading to either incomplete
results or violations of the zero-one-infinity rule.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Q35 machine types 2.3 and older had an integrated floppy controller.
Support for these machine types was removed by QEMU commit
commit 86165b499edf8b03bb2d0e926d116c2f12a95bfe
q35: Remove old machine versions
git describe: v2.5.0-1530-g86165b499e contains: v2.6.0-rc0~76^2~4
In libvirt, we have bumped the minimum QEMU version to 2.11:
commit b4cbdbe90b
qemu: Formally deprecate support for qemu < 2.11
git describe: v7.3.0-13-gb4cbdbe90b contains: v7.4.0-rc1~300
Since this QEMU version only supports Q35 machine versions 2.4+,
remove the code dealing with older ones.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This patch also includes propagation of flags into the
virNetworkDefParse().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I have added new driver functions which define network with given
flags. I have also replaced definitions of the functions without
flags with function calls to the new ones.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I need to propagate flags for the next commit.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This new API allows to define network with given flags.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Where easily possible, declare variables with g_auto to reduce
the amount of calls in cleanup sections.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
New clang has a false-positive about value of 'olddisks' being unused
after being set. This is clearly wrong because we want to use
'g_autofree' to clear it later.
While I'm against modifying good code for the sake of bad static
analysis in this case it's not obvious that we depend on the lifetime of
'olddisks' being needed until the end of the function as we store
pointers into it into the hash table and later copy them out.
Rewrite the code by assigning to 'olddisks' earlier and then using
'olddisks' in the loop, so it's clear where the lifetime of the objects
ends, and this should also silence the warning.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virNetworkDef was not freed if the function failed in the first
two ifs, causing a possible memory leak.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The variable is used inside a loop in which it's allocated in
each iteration. Bring it inside the loop so that g_autoptr()
kicks in each iteration.
Fixes: 3caa28dc50
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This essentially reverts:
commit ca5c8e1dc7
qemuxml2argvtest: Avoid conditions in test macro
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A helper that resets the log before each test and prints
it on failure.
It also takes the return variable as an argument,
so it can be used to eliminate number of branches
the compiler has to consider in the main function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor to use automatic cleanup and remove the goto's.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While s390x doesn't have NUMA nodes it has libnuma which is still
helpful as it parses sysfs for us and kernel emulates NUMA#0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When using 'virsh freepages' or 'virsh allocpages' then
virHostMemGetFreePages() or virHostMemAllocPages() is called,
respectively. But the following may happen: libvirt was built
without numactl support and thus a fake NUMA node was constructed
for capabilities, which means that startCell is going to be 0.
But we can't blindly pass startCell = 0 to virNumaGetPageInfo()
nor virNumaSetPagePoolSize() because they would operate over node
specific path (/sys/devices/system/node/nodeX) rather than NUMA
agnostic path (/sys/kernel/mm/hugepages/) and we are not
guaranteed that the former exists (kernel might have been built
without NUMA support).
Resolves:https://bugzilla.redhat.com/show_bug.cgi?id=1978574
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In all three cases (LXC, QEMU and VBox drivers) the caller has
access to host capabilities and thus know the maximum NUMA node.
This means, that virHostMemAllocPages() doesn't have to query
it. Querying may fail if libvirt was compiled without numactl
support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In all three cases (LXC, QEMU and VBox drivers) the caller has
access to host capabilities and thus know the maximum NUMA node.
This means, that virHostMemGetFreePages() doesn't have to query
it. Querying may fail if libvirt was compiled without numactl
support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This is just a small helper that will be used later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The 'PARSE' macro does not use '#' or '##' directives,
or anything from outside of the macro other than the
cleanup label.
Turn it into a function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that it uses virnetdevbandwidthmock which we only
build on Linux.
Fixes: eb55e8a897
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A logic bug in the code creating overlays on existing images resulted
into wrongly using "luks" instead of "qcow2" for the backing format if
the backing image is an luks-encrypted qcow2. The special format munging
is needed only for raw luks images.
In practice the impact is not as critical as to use encrypted images in
the backing chain the user must fully describe the backing chain
including backing images to provide encryption keys, which overrides the
metadata recorded in the qcow2 header.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to validate the XML against schema if option '--validate'
was passed to the virsh command. This patch also includes
propagation of flags into the virSecretDefParse() function.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We need to validate the XML against schema if option 'validate'
was passed to the 'iface-define' virsh command. For that we need
to allow validation flag and propagate flags to parse function.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We need to know if validation flag is present in order to
validate given XML against schema in virXMLParse().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch also includes propagation of flags into the
virNWFilterDefParse().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I have added a new driver function which allows to define
nwfilter with given flags. I have also replaced definition of
nwfilterDefineXML() with function call to the new function.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor testQemuGetCaps to use g_auto for cleanup,
remove the error label and use g_steal_pointer for
the successful return path.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When setting O_CLOEXEC flag on received FD fails the FD is closed
using VIR_FORCE_CLOSE(). But the call is wrapped in errno save
which is not necessary because VIR_FORCE_CLOSE() preserves errno
value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit abab5c47f8 incorrectly
assumed we do not have any files that could be affected by
sc_prohibit_reversed_compare_failure
due to the conditional assignment:
_test_script_regex ?= \<init\.sh\>
so it removed the check.
Also remove the leftover assignment of test-lib.sh,
since any new code attempting to use the compare function
with reversed arguments should be rejected by review
for using shell instead of C or Python.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With most of new code using g_auto for cleanup, contributors
are used to most of the free fucntions handling NULL gracefully.
Also, despite finding some occurrences in current codebase:
avoid_if_before_free
~/libvirt/src/ch/ch_monitor.c: if (mon->vm)
virObjectUnref(mon->vm);
~/libvirt/src/util/virresctrl.c: if (a_type->masks[cache])
virBitmapFree(a_type->masks[cache]);
the check passes succesfully, because the script's logic:
Exit status:
0 one or more matches
1 no match
2 an error
does not play nicely with xargs:
xargs exits with the following status:
0 if it succeeds
123 if any invocation of the command exited with status 1-125
The list of functions is also out of date - e.g. qemuCapsFree has
been renamed since.
This also helps eliminate one more Perl script per our programming
languages strategy: https://libvirt.org/programming-languages.html
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Directly invoke git ls-tree instead of the wrapper file which also:
* checks for other versioning systems
* prepends the source directory to all output lines
Since there is no srcdir prefix in the output anymore, also drop
the extra 'sed' invocation that removes it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Three callers were using VC_LIST directly.
This is not wrong, because they exclude the always-excluded
files by only looking for C and/or header files.
But using VC_LIST here prevents switching it to outputting
relative paths.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Meson already checks whether we're using git before running
syntax check. This only affects direct invocation through make.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Test virNetDevOpenvswitchInterfaceSetQos and
virNetDevOpenvswitchInterfaceClearQos with dryrun method.
Signed-off-by: zhangjl02 <zhangjl02@inspur.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Warn these error instead of return when removing qos or queues. This will
avoid residual qos clearance on multiple interfaces.
Signed-off-by: zhangjl02 <zhangjl02@inspur.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Separate virNetDevOpenvswitchInterfaceClearQos into two steps. When setting
qos, we can set only rx or tx and the other one should be cleared.
Signed-off-by: zhangjl02 <zhangjl02@inspur.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add vmuuid notes on virNetDevOpenvswitchInterfaceSetQos,
and change vmid to vmuuid.
Signed-off-by: Jinsheng Zhang <zhangjl02@inspur.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 42b2f35d36 was meant to test all four combinations of
serial-pipe-{server,client}-{app,vm} files, but did only add the files and by
mistake duplicated the tests. Those were later removed as duplicates, so add
them back in.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These XMLs live in a separate directory, there's no need for them
to have a special prefix in addition. Dinding proper file based on
vmx2xmltest.c is also needlessly complicated.
The steps used for mass rename are similar to v4.0.0-rc1~186.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In majority of DO_TEST() and DO_TEST_FAIL() calls the input vmx
file name is the same as the output XML file. Therefore, it's not
necessary to provide the same string twice. For the rest, where
the output XML file is different we can use symlinks to the
expected output.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There are three test cases are called twice. This is needless.
Drop redundant calls.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Recently, I wanted to attach an vhost-user interface but found
out that attach-interface command doesn't support it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use 'g_strsplit' to split the strings and then concatenate back when the
escape sequence (',,') is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a '--split' switch for the 'virsh echo' command and add few test
cases to the virshtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the need for temporary strings by filling the output buffer
directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Initialize the flags earlier and use VSH_EXCLUSIVE_OPTIONS_VAR to
declare the conflicting options as exclusive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Escaping for both shell and XML makes no sense. Use one at time so that
we can forbid use of both.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass a pointer to the 'ret' variable to the test executor itself and
update it there to improve compile times of the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass a pointer to the 'ret' variable to the test executor itself and
update it there to improve compile times of the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously we've ran into problems when 'testQemuInfoSetArgs' failed as
calling the actual test executor could lead to a crash if the data
wasn't prepared but reporting an error doesn't play nicely with our test
output which is handled by 'virTestRun'.
To avoid the issue (and as a side effect improve compilation times of
the test files) split up testQemuInfoSetArgs into two functions.
The first is still called 'testQemuInfoSetArgs' and just blindly
populates arguments into a sub-struct of testQemuInfo. This function no
longer reports errors
A new function 'testQemuInfoInitArgs' which is meant to be called from
the test executor then checks errors and prepares the test data. This
one can fail and the test will be marked as failed appropriately.
A nice side effect is that this vastly improves compile times of
qemuxml2xmltest and qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We pass multiple caching objects to individual tests which don't change.
To prevent always having to pass them individually to
'testQemuInfoSetArgs' introduce 'struct testQemuConf' which will hold
all of them and just the struct will be passed to the tests.
Additionally this will make the conf available from inside the test run.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the last patch removed the hack which needed lookahead to see
whether all QEMU_CAPS_ were parsed we can move the fetching of the
arguments into the loop.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The callers don't use it any more. Remove it to avoid fragility of the
test suite.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both are used in the same parser. Using offset values ensures that
errors are caught earlier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a explicit version of our test invocation macro for tests which use
no capabilities.
This reduces the usage of the somewhat anonymous 'NONE' macro and will
lead to simplification of the code later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since qemuCaps are now always allocated we don't need to pass
ARG_QEMU_CAPS, QEMU_CAPS_LAST to force the allocation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'DO_TEST_FULL' isn't a useful wrapper any more. Use the better name for
the main macro and replace all uses.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a explicit version of our test invocation macro for tests which use
no capabilities.
This removes the usage of the somewhat anonymous 'NONE' macro and will
lead to simplification of the code later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a explicit version of our test invocation macro for tests which use
no capabilities.
This reduces the usage of the somewhat anonymous 'NONE' macro and will
lead to simplification of the code later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a explicit version of our test invocation macro for tests which use
no capabilities.
This reduces the usage of the somewhat anonymous 'NONE' macro and will
lead to simplification of the code later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'DO_TEST_FULL' isn't a useful wrapper any more. Use the better name for
the main macro and replace all uses.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'DO_TEST_FULL' macro was ending the argument list which was being
started in other macros. Move it so that 'ARG_QEMU_CAPS' and
'QEMU_CAPS_LAST' are always used in the same macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since qemuCaps are now always allocated we don't need the hack.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify the logic so that 'info->qemuCaps' is populated, but empty even
when ARG_QEMU_CAPS was not used. The function still retains the
interlocking of fake caps with real caps.
A lot of the internal code expects qemuCaps to be populated and many
tests work this around by using ARG_QEMU_CAPS with no caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The string "aarch64" is passed in place of capability flags. We were lucky
that the pointer was always more than QEMU_CAPS_LAST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The string "ppc64" is passed in place of capability flags. We were lucky
that the pointer was always more than QEMU_CAPS_LAST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMU versions have this option so there's no need for us
to base it on the capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All QEMU versions we support have these and it's very unlikely that they
will be removed. Remove the capability checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The feature is supported by all supported qemu versions thus covered
thoroughly by other test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test is now pointless since we always assume that this option is
present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'set-numa-node' is the command which can set the equivalent parameters
to '-numa' in preconfig mode, so we can use it as witness to see that
-numa is supported.
To ensure that the old detection method is removed once we'll be bumping
qemu support add a comment with the appropriate version check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMU versions have all the fields so we can remove the
booleans controlling which fields are used on the monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
They are no longer used as we now assume that all tuning caps are
present and in case some will be removed we'll need to use different
probing methods.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All currently supported qemu versions support all throttling
capabilities. It is unlikely that any of the fields will be removed in
the future and if it will we will need to do specific probing which is
possible via the 'throttle' object which is the replacement for the
legacy way to configure throttling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The configurability of the number of dies in a CPU can be inferred from
the presence of the 'die-id' field in 'query-hotpluggable-cpus'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Probing QEMU_CAPS_DRIVE_DISCARD and QEMU_CAPS_DRIVE_DETECT_ZEROES can be
replaced by looking into the QMP schema rather than looking at -drive
which isn't in use any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make it more obvious that we care about passing FDs on the commandline
before startup of qemu, which is used to avoid startup monitor polling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU_CAPS_CHARDEV_RECONNECT, QEMU_CAPS_CHARDEV_LOGFILE and
QEMU_CAPS_CHARDEV_FILE_APPEND can be probed from the appropriate fields
in 'chardev-add' probed via the QMP schema instead of the command line
parameters.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a comment that will attempt to discourage adding new capabilities
based on 'query-command-line-options'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a cross reference of the enum value name with the string
representation. This allows a quick cross-reference of the values
without having to open the header and implementation files separately.
To achieve this the checker code at first obtains a list of the
flags and cross-references them when checking the grouping in
syntax-check, thus we are guaranteed to stay in sync.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Further commits will be refactoring and minimizing capabilities being
parsed from 'query-command-line-options'. Group the struct driving the
detection by argument name so it's easier to spot options belonging
together.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming commit will always add the property so the negative tests would
stop working.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add g_autofree to functions changed in previous commits doing
g_auto cleanup for libxml2-related variables, where it could
lead to removal of a label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Based on kernel commit messages the interface is
/sys/class/fc/fc_udev_device/appid_store
where we need to write the following string "$INODE:$APPID".
$INODE is the VM root cgroup inode in hexadecimal and $APPID is user
provided string that will be attached to each FC frame for the VM
within the cgroup identified by inode and has limit 128 bytes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Prepare the function for additional sub-elements where all of the
sub-elements are optional.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There is no need to error out for empty <partition></partition> element
as we can just simply ignore it. This allows to simplify the function
and prepare it for new sub-elements of <resource>.
It makes the <partition> element optional so we need to reflect the
change in schema as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
For new feature Fibre Channel VMID we will need to get inode of the
VM root cgroup as it is used in the new kernel API together with VMID.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
commit 2e668a61d5ae4("Fix error handling when adding MCS labels") uses
the 'pctx' in virReportError after it has been freed. Fix it.
Fixes: 2e668a61d5
Signed-off-by: Zhenyu Ye <yezhenyu2@huawei.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Libvirt assumes that a SCSI bus can fit up to 8 devices
(including controller itself), except for so called wide bus
which can accommodate up to 16 devices (again, including
controller). This plays important role when computing 'drive'
address in virDomainDiskDefAssignAddress(). So far, the only
driver that enables wide SCSI bus is VMX. But with newer
releases, ESX is capable of "super wide" bus (64 devices).
We can blindly bump the limit in our code because then we would
compute address that's invalid for older ESX versions that we
still want to support.
Unfortunately, I haven't found a better place where to store this
than virDomainDef.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous patch it can no longer happen that @def will be
NULL and *def won't be.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way we parse VMX configuration is rather unfortunate,
especially when it comes to disks. We allocate an array that can
handle all possible disks but leave the array counter (ndisks) at
zero and increase it only after successful parsing. But, we never
size the array down to release unneeded chunks of memory.
We can do better: we can use VIR_APPEND_ELEMENT() to allocate
array as needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
At the beginning of vmx.c we have a comment that maps
virtualHW.version field onto ESX version. However, it wasn't
updated in a while. Fill it in using the following kbase article:
https://kb.vmware.com/s/article/1003746
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some variables are used in a loop and only freed in the cleanup
section because we need to be able to jump out of the loop.
Reduce their scope and free them automatically.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use 'ostype' instead of generic 'str', to discourage
reuse. Also mark it as autofree.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
If the QEMU driver is configured to use the old "file" stdio
handler (meaning virtlogd is out of the picture) and a chardev
has a log file configured we rely on QEMU being able to create
the file itself. This may not be always possible (e.g. if the
logfile is set to a directory that QEMU process can't reach).
In such case we should create the file and just pass its FD to
QEMU.
We could do that unconditionally and just either pass FD from
virtlogd or the one we opened, because we bumped QEMU version
and are now requiring new enough QEMU. However, I'm keeping the
old style where logfile is appended on the cmd line for the tests
sake.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1989457
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
The function doesn't really need domain object, but domain
definition from which it takes seclabels.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
The function doesn't write to domain definition really so make
@def argument as const. This allows us to call it from functions
where the domain definition is already const.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
LIBXL_HAVE_LIBXL_DEVICE_DISK_DISCARD_ENABLE exists since Xen 4.5.0
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
virXMLParse() now allows validating xml against schema directly,
eliminating the need to do it individually in each function.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
xmlDocPtr is no longer needed, because validation against schema
was moved to another function.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
virXMLParse() now allows to validate xml against schema directly,
eliminating the need to do it individually.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We need this in order to validate XML against schema at one
place, rather than have the same code for validation in different
functions.
I will add '--validate' option to more virsh commands soon and
this makes it easier as virXMLParse() is called in every one I
plan to change.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory cleanup to get rid of the cleanup section,
and of the memory leak that happens inside the loop, because
cap, alloc and phy are only freed once per function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We didn't always save status xml after generating new taint message
which resulted in it being deleted in case of a libvirtd restart.
Some taint messages were preserved thanks to saving status xml
separately at the end of the calling functions. With this, every taint
message is saved, regardless of the calling functions.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1965589
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
test-lib.sh needs these to be set.
Export them so that the virsh-* tests can be run using:
builddir$ ./run srcdir/tests/virsh-snapshot
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Remove cleanup sections that are no longer needed, as well
as unnecessary 'ret' variables.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Do not use 'arg' which is later used for an allocated string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Instead of using the same variable to store either a const pointer
or an allocated string, always make a copy.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is the preferred way to do it, but there were a few
instances in which some of the path components had embedded
slashes instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Turn 'mounts' into a proper GStrv after sorting so that automatic
cleanup can be used and shuffle around the cleanup steps so that jumps
can be avoided in favor of direct return of error code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'devMountsPath' and 'devMountsSavePath' are NULL terminated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'devMountsPath' can be converted to an auto-cleared stringlist and thus
asking for the number of entries is not necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller is passing a NULL terminated string list as
'devMountsPath' thus we don't need to get the count of elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The value of 'next' is copied into 'item.file' so we can move the update
to the 'next' pointer earlier and move the VIR_APPEND_ELEMENT call to
where we figure out that we need to append the value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always process the full list so there's no value in storing the count
separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always process the full list so there's no value in storing the count
separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always process the full list so there's no value in storing the count
separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously they were stored in two separate arrays. This way it's
obvious when referencing the same one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both virDomainAuthorizedSSHKeysGet and virDomainGetMessages return a
NULL-terminated string-list, so we can use g_auto(GStrv) to clear the
used memory on failures.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for the 'qemuMonitorTest' object and the
list of keys so that the cleanup section can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the conversion from virPCIVirtualFunctionList which encapsulates
the list of virtual functions to two disjunct arrays.
This greatly simplifies the fetching of the parameters as well as
cleanup in the caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virNetDevGetVirtualFunctions' calls 'virPCIGetVirtualFunctions' and
then re-iterates the returned list to fetch the interface names for the
returned virtual functions.
If we move the fetching of the interface name into
virPCIGetVirtualFunctions we can simplify the code and remove a bunch of
impossible error states.
To accomplish this the function is renamed to
'virPCIGetVirtualFunctionsFull' while keeping a wrapper with original
name and if the physical port ID is passed the interface name is fetched
too without the need to re-convert the address into a sysfs link.
For now 'virNetDevGetVirtualFunctions' still converts the returned data
into two lists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a struct for holding the list of VFs returned by
virPCIGetVirtualFunctions so that we can employ automatic memory
clearing and also allow querying more information at once.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since UUID is not guaranteed to be unique by mdevctl, we may have more
than one nodedev with the same UUID. Therefore, we need to disambiguate
when looking up mdevs by specifying the UUID and parent address, which
mdevctl guarantees to be a unique combination.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately, mdevctl supports defining more than one mdev with the
same UUID as long as they have different parent devices. (Only one of
these devices can be active at any given time).
This means that we can't use the UUID alone as a way to uniquely
identify mdev node devices. Append the parent address to ensure
uniqueness. For example:
Before: mdev_88a6b868_46bd_4015_8e5b_26107f82da38
After: mdev_88a6b868_46bd_4015_8e5b_26107f82da38_0000_00_02_0
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1979440
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This can be used similarly to other postparse callbacks in libvirt --
filling in additional information that can be determined by using the
information provided in the XML. In this case, we determine the address
of the parent device and cache it in the mdev caps so that we can use it
for generating a unique name and interacting with mdevctl.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
At the moment, this is only for mediated devices. When a new mediated
device is created or defined, the xml is expected specify the nodedev
name of an existing device as its parent. We were not previously
validating this and were simply accepting any string here.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
mdevctl can report multiple defined devices with the same UUID
but different parents, including parents that don't actually exist on
the host machine. Libvirt sets the parent to the 'computer' device for
all of the mdevs that have nonexistent parents. Because of this, it's
possible that there are multiple devices with the same UUID and the same
'computer' device as their parent, so the combination of uuid and parent
nodedev name is not guaranteed to be a unique name.
We need to ensure that each nodedev has a unique name. If we can't use
the UUID as a unique nodedev name, and we can't use the combination of
UUID and nodedev parent name, we need to find another solution. By
caching and using the parent name reported by mdevctl in combination
with the UUID, we can achieve a unique name. mdevctl guarantees that its
uuid/parent combination is unique.
This value will be used to set the mdev nodedev name in a following commit.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 51fbbfdce8 attempted to get the proper nodedev name for the
parent of an defined mdev by traversing the filesystem and looking for a
device that had the appropriate sysfs path. This works, but it would be
cleaner to to avoid mucking around in the filesystem and instead just
just examine the list of devices we have in memory.
We already had a function nodeDeviceFindAddressByName() which constructs
an address for parent device in a format that can be used with mdevctl.
So if we refactor this function into a a function that simply formats an
address for an arbitrary virNodeDeviceObj*, then we can use this
function as a predicate for our new virNodeDeviceObjListFind() function
from the previous commit. This will search our list of devices for one
whose address matches the address we get from mdevctl.
One nice benefit of this approach is that our test cases will now
display xml output with the proper parent name for mdevs (assuming that
we've added the appropriate mock parent devices to the test driver).
Previously they just displayed 'computer' for the parent because the
alternative would have required specially constructing a mock filesystem
environment with a sysfs that mapped to the appropriate parent.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is a generic function that you can provide your own predicate
function to search for a particular device. It will be used in an
upcoming commit.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The hypervisor drivers can be disabled in certain build scenarios, so
their corresponding post scripts need to match.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We currently query the host MSRs to determine if TSC scaling is
supported. This works OK when running privileged and can open
the /dev/cpu/0/msr. When unprivileged we fallback to querying
MSRs from /dev/kvm. This is incorrect because /dev/kvm only
reports accurate info for MSRs that are valid to use from inside
a guest. The TSC scaling support MSR is not, thus we always end
up reporting lack of TSC scaling when unprivileged.
The solution to this is easy, because KVM can directly report
whether TSC scaling is available, which matches what QEMU will
do at startup.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/188
Reported-by: Roman Mohr <rmohr@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 05bd8db60b.
It is true that the remote driver client now contains logic for probing
the driver to connect to when using modular daemons. This logic, however,
only runs when the remote driver is NOT running inside a daemon since we
don't want it activated inside libvirtd. Since the same remote driver
build is used in all daemons, we can't rely on it in virtproxyd either.
Thus we need to keep the virtproxyd probing logic
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The function was inconsistently using 'return -1' and 'goto cleanup;'
unify it by removing the cleanup label and 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's used only inside the loop filling the extents, move it there and
restructure the code so that 'extent.path' doesn't have to be freed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'list' will always be NULL when reaching 'virObjectListFreeCount' thus
we can remove the call as well as the 'ret' variable which was only ever
equal to 'nclients' at the point when we returned the value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'bootHotplug' can be auto-freed when terminating the function and moving
the declaration of 'vcpuprops' to the loop which uses it along with
automatic freeing allows us to simplify cleanup in certain cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing for 'tmpvars' and move the allocation of
tmpvars earlier so that we are guaranteed that 'obj' will always be
appended to 'inst->filters' and thus don't need cleanup for it.
By moving the reset of 'inst' to the block when virNWFilterDefToInst
fails we can get rid of the rest of the cleanup section and remove the
'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Construct the 'ruleinst->vars' hash table separately in a temporary
variable so that 'ruleinst' can be allocated on success. This allows us
to get rid of the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'cb' is always NULL when 'virObjectEventCallbackListAddID' is called.
Remove the call.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'item' is always NULLed-out by VIR_APPEND_ELEMENT and 'ret' variable is
always 0 when used so both can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'hub' doesn't need to be freed any more because it's always consumed and
NULLed-out by VIR_APPEND element. This also makes the 'ret' variable
obsolete.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'video' will only ever be NULL after the 'cleanup' label thus there's no
need to use 'virDomainVideoDefFree'. In fact we can fully remove the
cleanup section and 'ret' variable by returning directly from failure
points.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
VIR_APPEND_ELEMENT doesn't report any errors now so we can remove
VIR_APPEND_ELEMENT_QUIET and replace all uses by VIR_APPEND_ELEMENT
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now it was an alias to VIR_APPEND_ELEMENT. Use virAppendElement
directly until VIR_APPEND_ELEMENT is refactored too and we'll be able to
get rid of VIR_APPEND_ELEMENT_QUIET completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT_COPY which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
VIR_APPEND_ELEMENT_INPLACE and VIR_APPEND_ELEMENT_COPY_INPLACE already
ignore the return value from 'virInsertElementsN' which allows a trivial
conversion to virAppendElement without the need for 'ignore_value'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The new wrapper calls virInsertElementInternal with the appropriate
arguments without any checks which are unnecessary for appension. This
allows to have no return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Split out the code doing the movement of the elements and insertion from
the range checks. This will help in adding an error-free version for
appension.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The idea of @add was that the insersion/appension macros would allow
adding more than one element but this feature was never implemented.
'add' is nowadays used as a dummy variable consuming the result of the
VIR_TYPEMATCH compile time check.
Make it obvious that we don't use 'add' by renaming it to
'typematchDummy', marking it as unused and replacing all occurences
where the value was used by literal '1'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are cpu definitions that are allocated in
qemuTestDriverInit() but are missing corresponding
virCPUDefFree() call in qemuTestDriverFree(). It's safe to call
the free function because the definitions contain a refcounter
and thus even if they were still in use the refcounter would be
just decreased.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a version of virPidFileForceCleanupPath that takes
a 'group' bool argument and propagate it all the way
down to virProcessKillPainfullyDelay.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We need to enable or disable the modular daemons with systemd after the
RPM install/uninstall.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The patterns for enabling/disabling daemons post/postun-install has a
bit of duplication across the different part of the spec, due to the
number of socket units involved. This is going to get much worse with
the need to enable/disalbe modular daemons, so benefits from macroization.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The daemons all need restarting to ensure they pick up the newly
installed code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we restart libvirtd if the nwfilter/network configs have
changed. We need to take account of possibility that the modular
daemons are in use instead though.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The patterns for restarting daemons post-transaction has a bit of
duplication across the different part of the spec. This is going to
get much worse with the need to restart modular daemons, so benefits
from macroization.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
lcitool now uses the term "target" instead of "host" to refer to
the various operating systems it supports, and we need to adapt
our helper script so that it works with the new command line
interface.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When we try to migrate vm, we check if it contains only devices
that are able to migrate. If a hostdev device is not able to
migrate we raise an error with <hostdev/>, but it can actually be
<interface/>, so we need to check if hostdev device was created
by us from interface and show the right error message.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1942315
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to test the virDomainGetMessages for test driver, we need to
check some taints or deprecations, so introduce testDomainObjCheckTaint
for checking taints.
As we introduced testDomainObjCheckTaint for test driver, the `dominfo`
command in virshtest will now print tainting messages, so add them for
test.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The test driver and qemu driver could share the same code in
virDomainGetMessages(), so extract it to a function.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The current docker:dind container has broken default seccomp filter that
results in clone3 being blocked, which in turn breaks Fedora 35 rawhide.
This custom image has a workaround that causes the seccomp filter to
return ENOSYS for clone3 instad of EPERM, thus triggering glibc to
fallback to clone correctly.
Reviewed-by: Erik Skultety <eskultet@redhat>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The package is mistakenly obsoleting itself, when it should be
obsoleting the -static packages we dropped.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In virTestMain() the @failedTests bitmap is allocated and
optionally @testBitmap too. But neither of them is freed.
Fixes: 0cd5a726e3
Fixes: cebb468ef5
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
