1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

3697 Commits

Author SHA1 Message Date
David Teigland
49cd54fc3a commands: fix lvcreate mirrors/stripes options
Systematically outline every combination of:
--type striped, --type mirror, --type raid, --mirrors, --stripes
and make sure each is assigned to one specific cmd def.

This revealed that a new command def is needed for
lvcreate that uses both --mirrors and --stripes
but no --type option.

The use of LVCREATE_RAID shortcut for an option set
resulted in mirrors/stripes being included in optional
opts set when they were already in the required list.
2017-03-13 13:37:07 -05:00
David Teigland
c8671f6f79 commands: use correct relative signs with mirror option
As was recently done with relative signes for sizes/extents,
limit the signs used with the mirrors option, e.g.
lvcreate --mirrors now does not accept or advertise an
optional minus sign with the value.  lvconvert --mirrors
accepts +|-.
2017-03-10 15:41:29 -06:00
David Teigland
15682270f4 commands: fix lvconvert options for mirrors/stripes
The LVCONVERT_RAID shortcut for including options ended
up including mirrors/stripes as optional opts in defs where
they were already required, or in defs where they would
not be used.  Remove the option set and specify in each
case only the options wanted.
2017-03-10 14:05:15 -06:00
Zdenek Kabelac
4d2b1a0660 cache: enable usage of --cachemetadataformat
lvcreate and lvconvert may select cache metadata format when caching LV.
By default lvm2 picks best available format.
2017-03-10 19:33:01 +01:00
Zdenek Kabelac
7b748b7cb8 cache: allow to specify cachemetadataformat
OO_LVCREATE_CACHE accepts --cachemetadataformat.

Support new option --cachemetadataformat auto|1|2 for caching.
Word 'auto' can be also be given as '0'.
2017-03-10 19:33:01 +01:00
Zdenek Kabelac
4d0793f0ec pool: rework handling of passed args
As now we can properly recognize all paramerters for pool creation,
we may drop PASS_ARG_  defines and rely on '_UNSELECTED' or 0 entries
as being those without user given args.

When setting are not given on command line - 'update' function
fill them from profiles or configuration. For this  'profile' arg
was needed to be passed around and since  'VG' itself is not needed,
it's been all replaced with 'cmd, profile, extents_size' args.
2017-03-10 19:33:01 +01:00
Zdenek Kabelac
1cfc1be85d parser: enable --metadataprofile for pool lvconvert
Lvconvert can use values from profile when caching.
2017-03-10 19:33:00 +01:00
Zdenek Kabelac
07c24736e0 parser: allow --zero for pool conversion 2017-03-10 19:33:00 +01:00
Zdenek Kabelac
46820bfff3 lvconvert: share function for cache params
Reuse same code for getting/setting cache parameters with lvcreate.

So there is single one place how to get vars from profiles and configs.

Variables declarations are moved to start of function and
there is no need to initialize them as they are always
defined by functions get_cache_params() and get_pool_params().
2017-03-10 19:33:00 +01:00
Zdenek Kabelac
f24a1f06b2 lvcreate: respecting profile settings 2017-03-10 19:33:00 +01:00
Zdenek Kabelac
36003df7e3 cache: extend usability of cache_set_params
Fix missing reset of '*settings' pointer when no args were given.

Handle cache_chunk settings like all other settings, so it is properly
updated only with non-zero settings and the existing cache-pool
chunk_size is not being reconfigured.
2017-03-10 19:33:00 +01:00
Zdenek Kabelac
c598e65de9 cache: get and set cache params 2017-03-10 19:33:00 +01:00
Zdenek Kabelac
861992d874 lvconvert: replacing with goto
Split-off patch that just replaces returns with 'goto bad'
so there is single place to release  policy_settings.

In the next patch we will start to use some shared
function call between lvconvert and lvcreate
(effectively restoring previous logic which has got lost).
2017-03-10 19:33:00 +01:00
Zdenek Kabelac
4184331965 cache: use UNSELECTED enum
Switch from _UNDEFINED to _UNSELECTED which is more describing
its value 0, while value -1 is better match for UNDEFINED.
2017-03-10 19:33:00 +01:00
Zdenek Kabelac
b8cd0f4808 thin: add new ZERO/DISCARDS_UNSELECTED
To more easily recognize unselected state from select '0' state
add new 'THIN_ZERO_UNSELECTED' enum.
Same applies to THIN_DISCARDS_UNSELECTED.

For those we no longer need to use PASS_ARG_ZERO or PASS_ARG_DISCARDS.
2017-03-10 19:33:00 +01:00
Zdenek Kabelac
8c72878cf2 pool: drop duplicated sign test
Avoid duplicate testing of '-' sign.
Already checked with arg_from_list_is_negative().
2017-03-10 19:33:00 +01:00
Zdenek Kabelac
f221ba97c9 lvcreate: avoid rejecting --metadataprofile
Likely user normaly have used 'shortcut' --profile option which
is (for lvcreate) decoded as metadataprofile.

However full option was rejected.
2017-03-10 19:33:00 +01:00
Zdenek Kabelac
fb38426d28 lvconvert: validate name before prompt
Before prompting make sure name fits.
2017-03-10 19:33:00 +01:00
Zdenek Kabelac
7ad57d55af lvconvert: indent and code simplification
Simple modifications to existing  _lvconvert_to_pool().
2017-03-10 19:33:00 +01:00
Heinz Mauelshagen
2fcbe34fe8 lvcreate: fix "striped" limit
Fix regression limiting number of stripes to 8.
Raise back to 128 as before.

Resolves: rhbz1389546
2017-03-10 18:57:06 +01:00
David Teigland
43388f1220 commands: fix missing skip condition in coverity fixes
Fix for commit 5e6ea4b7
2017-03-10 11:50:00 -06:00
David Teigland
5e6ea4b784 commands: coverity fixes 2017-03-10 10:54:42 -06:00
Bryn M. Reeves
c713745314 dmsetup: always initialise 'dms' in _stats_update_file() 2017-03-10 16:44:08 +00:00
Bryn M. Reeves
1f7ac54bc4 tools: add generated headers to .gitignore 2017-03-10 13:13:41 +00:00
Bryn M. Reeves
6a0f597727 dmsetup: always initialise 'mode' in filemap create functions
Older compilers cannot tell that the 'mode' variable is only
used in branches in which it is assigned:

dmsetup.c:5651: warning: "mode" may be used uninitialized in this function
dmsetup.c:5023: warning: "mode" may be used uninitialized in this function

Avoid this by always assigning the variable a value.
2017-03-10 12:17:25 +00:00
Bryn M. Reeves
baa8a9be4a dmstats: start dmfilemapd when creating or updating file maps
Launch an instance of the filemap monitoring daemon when creating,
or updating, a file mapped group, unless the --nomonitor switch is
given.

Unless --foreground is given the daemon will detach from the
terminal and run in the background until it is signaled or the
daemon termination conditions are met.

The --follow={inode|path} switch is added to control the daemon
behaviour when files are moved, unlinked, or renamed while they
are being monitored.

The daemon runs with the same verbosity as the dmstats command
that starts it.
2017-03-09 18:50:15 +00:00
David Teigland
aa31272223 lvresize: poolmetadatasize cannot use minus 2017-03-09 09:51:24 -06:00
Heinz Mauelshagen
6dfe1ce251 lvconvert: prompt when splitting off LV of a 2-legged raid1 LV
Splitting off an image LV of a 2-legged
raid1 LV causes loss of resilience.

Ask user to avoid uninformed loss of all resilience.

Don't ask for N > 2 legged raid1 LVs.

Adjust tests.
2017-03-09 13:59:47 +01:00
Heinz Mauelshagen
413164765f lvconvert: remove superfluous compile time conditonal code 2017-03-09 12:16:11 +01:00
Heinz Mauelshagen
d250aa7208 lvconvert: prompt when splitting off a tracked LV of a 2-legged raid1 LV
Splitting off an image LV of a 2-legged raid1 LV tracking changes
causes loosing partial resilience for any newly written data set.
Full resilience will be provided again after the split off image LV
got merged back in and the new data set got fully synchronized.
Reason being that the data is only stored on the remaining single
writable image during the split.

Ask user to avoid uninformed loss of such partial resilience.

Don't ask for N > 2 legged raid1 LVs.
2017-03-09 03:22:55 +01:00
Heinz Mauelshagen
7fbe6ef16b lvconvert: prompt when converting raid1 to linear
Ask user when converting raid1 to linear to avoid
uninformed loss of all resilience.
2017-03-09 02:39:49 +01:00
David Teigland
b4e78b26f5 help: fix missing required option
Fix for previous commit 4d0172ff15.
2017-03-08 15:00:27 -06:00
David Teigland
4d0172ff15 man/help: use order of required options from cmd def
Follow the same as written in command-lines.in
2017-03-08 14:51:08 -06:00
David Teigland
3d5182c819 man: add more references to topical man pages 2017-03-08 14:43:30 -06:00
David Teigland
a6a2788e7c commands: clean up and unify signed option value handling
Add new values for different sign variations, resulting in:

size_VAL      no sign accepted
ssize_VAL     accepts + or -
psize_VAL     accepts +
nsize_VAL     accpets -

extents_VAL   no sign accepted
sextents_VAL  accepts + or -
pextents_VAL  accepts +
nextents_VAL  accepts -

Depending on the command being run, change the option
values for --size, --extents, --poolmetadatasize to
use the appropriate value from above.

lvcreate uses no sign (but accepts + and ignores it).
lvresize accepts +|- for a relative change.
lvextend accepts + for a relative change.
lvreduce accepts - for a relative change.
2017-03-08 12:54:43 -06:00
David Teigland
11f1556d5d commands: combine duplicate arrays for lv types and props
Like opt and val arrays in previous commit, combine duplicate
arrays for lv types and props in command.c and lvmcmdline.c.
Also move the command_names array to be defined in command.c
so it's consistent with the others.
2017-03-08 11:03:02 -06:00
David Teigland
690f604733 commands: combine duplicate arrays for opt and val
command.c and lvmcmdline.c each had a full array defining
all options and values.  This duplication was not removed
when the command.c code was merged into the run time.
2017-03-08 11:03:02 -06:00
David Teigland
f48e6b2690 help: avoid end notes repetition in lvm help all 2017-03-08 11:03:02 -06:00
David Teigland
0b019c5406 man/help: improve stripes option wording 2017-03-06 12:20:33 -06:00
David Teigland
11589891d7 man: move the full UNIT description
Part of the UNIT description was still living in the
--size description.  Move it to the Size[UNIT] description
since it is used by other options, not just --size.
2017-03-03 16:12:02 -06:00
David Teigland
b6c4b7cfb0 man/help: poolmetadatasize option can take relative value
In lvcreate/lvconvert, --poolmetdatasize can only be an
absolute value, but in lvresize/lvextend, --poolmetadatasize
can be given a + relative value.

The val types only currently support relative values that
go in both directions +|-.  Further work is needed to add
val types that can be relative in only one direction, and
switching various option values to one those depending on
the command name.  Then poolmetdatasize will not appear
with a +|- option in lvcreate/lvconvert, and will
appear with only the + option in lvresize/lvextend.
2017-03-03 16:12:02 -06:00
David Teigland
e4ef3d04ad help: show short opt with long opt
e.g. show -n|--name instead of just --name
2017-03-03 15:14:18 -06:00
David Teigland
9a50df291a man/help: rework extents and size output
Clean up and correct the details around --extents and --size.

lvcreate/lvresize/lvreduce/lvextend all now display the
extents option in usages.

The Size and Number value variables for --size and --extents
are now displayed without the [+|-] prefix for lvcreate.
2017-03-03 14:23:50 -06:00
David Teigland
e7ee89d80b man/help: improve the PV range description 2017-03-03 11:15:27 -06:00
David Teigland
2a5e24580a args: in cachemode option fix passthrough value 2017-03-03 10:53:18 -06:00
David Teigland
191a2517be args: update select description
mention --select help and --options help.
2017-03-03 09:53:11 -06:00
David Teigland
1a0d57f895 man lvcreate: show extents option
Display --extents as an option in each cmd def,
in addition to the special notes about how
--size and --extents are alternatives.
2017-03-02 16:58:19 -06:00
David Teigland
9a62767f2d man lvcreate: remove the extents prefix
This applies the same hack to --extents (dropping
the [+|-] prefix), as commit b7831fc14a did for --size.
2017-03-02 16:58:19 -06:00
David Teigland
5d39927f22 help: show extents option for lvcreate
A special case is needed to display
--extents for lvcreate since the cmd defs
treat --extents as an automatic alternative
to --size (to avoid duplicating every cmd def).
2017-03-02 16:58:19 -06:00
David Teigland
9b23d9bfe4 help: print info about special options and variables
when --longhelp is used
2017-03-02 16:58:19 -06:00
David Teigland
f350283398 lvcreate: munge size value in help output
Add hack to omit the [+|-] from the --size
value.  Same hack exists in man generator.
2017-03-02 16:58:19 -06:00
David Teigland
d3bcec5993 man: change the synopsis option style
Remove the required/optional words because it
should already be evident from the use of [ ].
2017-03-02 14:08:59 -06:00
David Teigland
910918d1c2 lvcreate: allow chunksize option when creating cache 2017-03-02 13:58:27 -06:00
David Teigland
6360ba3d2d commands: handle including an optional opt multiple times
When a cmd def includes multiple sets of options (OO_FOO),
allow multiple OO_FOO sets to contain the same option and
avoid repeating it in the cmd def.
2017-03-02 13:52:06 -06:00
David Teigland
b7831fc14a lvcreate/lvresize: the --size option accepts signed values
There was confusion in the code about whether or not the
--size option accepted a sign.  Make it consistent and clear
that it does.

This exposes a new problem in that an option can only
accept one value type, e.g. --size can only accept a
signed number, it cannot accept a positive or negative
number for some commands and reject negative numbers for
others.

In practice, lvcreate accepts only positive --size
values and lvresize accepts positive or negative --size
values.  There is currently no way to encode this
difference.  Until that is fixed, the man page output
is hacked to avoid printing the [+|-] prefix for sizes
in lvcreate.
2017-03-02 12:53:01 -06:00
Alasdair G Kergon
70c1fa3764 tools: Fix overriding of current_settings.
Settings specified in other command line args take precedence over
profiles and --config, which takes precedence over settings in actual
config files.

Since commit 1e2420bca8 ('commands: new
method for defining commands') commands like this:
  lvchange --config 'global/test=1' -ay vg
have been printing the 'TEST MODE' message, but nevertheless making
real changes.
2017-03-02 16:41:41 +00:00
David Teigland
8df3f300ba commands: adjust syntax error message 2017-03-02 09:46:41 -06:00
David Teigland
b76852bf35 man lvchange: mention special activation vals
used by lvmlockd and clvmd.
2017-03-02 09:31:06 -06:00
David Teigland
c25b95e2ef man: fix typo 2017-03-01 16:59:51 -06:00
David Teigland
51dfbf1fb3 commands: tweak some descriptions 2017-03-01 16:59:51 -06:00
David Teigland
62abae1525 man: put some commands into advanced usage section
and separate commands with --
2017-03-01 10:22:48 -06:00
David Teigland
eb9586bd3b commands: SECONDARY flag changes in cmd defs
Add/remove the SECONDARY_SYNTAX flag to cmd defs.
cmd defs with this flag will be listed under the
ADVANCED USAGE man page section, so that the main
USAGE section contains the most common commands
without distraction.

- When multiple cmd defs do the same thing, one variant
  can be displayed in the first list.
- Very advanced, unusual or uncommon commands should be
  in the second list.
2017-03-01 10:22:48 -06:00
David Teigland
1828822bd8 help: print full usage for lvm help all 2017-02-28 15:58:14 -06:00
David Teigland
21456dcf7f commands: include lvconvert cache options as group 2017-02-28 13:47:46 -06:00
David Teigland
89661981e8 man: fix syntax for PV ranges 2017-02-28 12:22:12 -06:00
David Teigland
4a14617dc4 commands: remove lvconvert raid rule
A raid0 LV also needs to be converted to other
raid levels, so this rule should be removed entirely.
2017-02-27 17:06:08 -06:00
David Teigland
f9d28f1aec man: mention regionsize default is in lvm.conf 2017-02-27 17:05:20 -06:00
David Teigland
998151e83e commands: fix lvconvert raid rule
Recent rule change was incorrect.
We want to allow 'lvconvert --type raid' on raid1 LVs.
2017-02-27 16:33:38 -06:00
David Teigland
8d0df0c011 commands: fixes for recent raid changes
- Combine the equivalent lvconvert --type raid defs.
  (Two cmd defs must be different without relying
  on LV type, which are not known at the time the
  cmd def is matched.)

- Remove unused optional options from lvconvert --stripes,
  and lvconvert --stripesize.

- Use Number for --stripes_long val type.

- Combine the cmd def for raid reshape cleanup into the
  existing start_poll cmd def (they were duplicate defs).
  Calls into the raid code from a poll opertion will be
  added.
2017-02-27 14:44:00 -06:00
David Teigland
4f7631b4ad man: change option sorting in synopsis
The options list was sorted as:
- options with both long and short forms, alphabetically
- options with only long form, alphabetically

This was done only for the visual effect.  Change to
sort alphabetically by long opt, without regard to
short forms.
2017-02-24 15:11:18 -06:00
David Teigland
5f6bdf707d man: add ENVIRONMENT VARIABLES section 2017-02-24 15:05:17 -06:00
David Teigland
84cceaf9b9 lvconvert: fix handling args in combining snapshots
Fixes commit 286d39ee3c, which was correct except
for a reversed strstr.  Now uses strchr, and modifies
a copy of the name so the original argv is preserved.
2017-02-24 14:17:58 -06:00
David Teigland
74ba326007 man: use Size variable for a number with unit
Define a separate variable type Size to represent
a number that takes an optional UNIT.
2017-02-24 13:44:05 -06:00
Heinz Mauelshagen
189fa64793 lvconvert: impose region size constraints
When requesting a regionsize change during conversions, check
for constraints or the command may fail in the kernel n case
the region size is too smalle or too large thus leaving any
new SubLVs behind.

Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
2017-02-24 07:27:43 +01:00
Heinz Mauelshagen
2574d3257a lvconvert: allow regionsize on upconvert from linear
Allow to provide regionsize with "lvconvert -m1 -R N " on
upconverts from linear and on N -> M raid1 leg conversions.

Resolves: rhbz1394427
2017-02-24 05:20:58 +01:00
Heinz Mauelshagen
34caf83172 lvconvert: add infrastructure for RaidLV reshaping support
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces the changes to call the reshaping infratructure
from lv_raid_convert().

Changes:
- add reshaping calls from lv_raid_convert()
- add command definitons for reshaping to tools/command-lines.in
- fix raid_rimage_extents()
- add 2 new test scripts lvconvert-raid-reshape-linear_to_striped.sh
  and lvconvert-raid-reshape-striped_to_linear.sh to test
  the linear <-> striped multi-step conversions
- add lvconvert-raid-reshape.sh reshaping tests
- enhance lvconvert-raid-takeover.sh with new raid10 tests

Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
2017-02-24 05:20:58 +01:00
Heinz Mauelshagen
e2354ea344 lvconvert: add infrastructure for RaidLV reshaping support
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces infrastructure prerequisites to be used
by raid_manip.c extensions in followup patches.

This base is needed for allocation of out-of-place
reshape space required by the MD raid personalities to
avoid writing over data in-place when reading off the
current RAID layout or number of legs and writing out
the new layout or to a different number of legs
(i.e. restripe)

Changes:
- add members reshape_len to 'struct lv_segment' to store
  out-of-place reshape length per component rimage
- add member data_copies to struct lv_segment
  to support more than 2 raid10 data copies
- make alloc_lv_segment() aware of both reshape_len and data_copies
- adjust all alloc_lv_segment() callers to the new API
- add functions to retrieve the current data offset (needed for
  out-of-place reshaping space allocation) and the devices count
  from the kernel
- make libdm deptree code aware of reshape_len
- add LV flags for disk add/remove reshaping
- support import/export of the new 'struct lv_segment' members
- enhance lv_extend/_lv_reduce to cope with reshape_len
- add seg_is_*/segtype_is_* macros related to reshaping
- add target version check for reshaping
- grow rebuilds/writemostly bitmaps to 246 bit to support kernel maximal
- enhance libdm deptree code to support data_offset (out-of-place reshaping)
  and delta_disk (legs add/remove reshaping) target arguments

Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
2017-02-24 05:20:58 +01:00
David Teigland
ffe3ca26e0 man: improve line breaks
Borrow tricks from dmsetup man page to improve
the line break and indentation using .ad l, .ad b,
and soft break \%.
2017-02-23 17:06:42 -06:00
David Teigland
3fd3c9430d man/help: change syntax to UNIT
(Change to recent commit 3f4ecaf8c2.)

Use --foo Number[k|UNIT] to indicate that
the default units of the number is k, but other
units listed below are also accepted.

Previously, underlined/italic Unit was used,
like other of variables, but this UNIT is more
like a shortcut than an actual variable.
2017-02-23 14:24:28 -06:00
Heinz Mauelshagen
8ab0725077 lvchange: reject writemostly/writebehind on raid1 during resync
The MD kernel raid1 personality does no use any writemostly leg as the primary.

In case a previous linear LV holding data gets upconverted to
raid1 it becomes the primary leg of the new raid1 LV and a full
resynchronization is started to update the new legs.

No writemostly and/or writebehind setting may be allowed during
this initial, full synchronization period of this new raid1 LV
(using the lvchange(8) command), because that would change the
primary (i.e the previous linear LV) thus causing data loss.

lvchange has a bug not preventing this scenario.

Fix rejects setting writemostly and/or writebehind on resychronizing raid1 LVs.

Once we have status in the lvm2 metadata about the linear -> raid upconversion,
we may relax this constraint for other types of resynchronization
(e.g. for user requested "lvchange --resync ").

New lvchange-raid1-writemostly.sh test is added to the test suite.

Resolves: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=855895
2017-02-23 15:09:29 +01:00
David Teigland
3f4ecaf8c2 man/help: improve the style of units indicator
We use --foo Number[k|Units] to indicate that
the default units of the number is k, but other
units listed below are also accepted.

Capitalize and underline Units so it is consistent
with other variables, and reference it at the end.

Technically, the k should be bold, but this
tends to make the text visually hard to read
because of the excessive highlights scattered
everywhere.  So it's left normal text for now
(it's unlikely to confuse anyone.)
2017-02-22 16:50:30 -06:00
David Teigland
da634bfc89 man: indicate repeatable options
Print ... after a repeatable option in the OPTIONS section.
An alternative would be to just mention in the text description
that the option is repeatable.
2017-02-22 16:38:54 -06:00
David Teigland
1eb1869626 man: improve writemostly PV arg 2017-02-22 15:20:44 -06:00
Zdenek Kabelac
6716f5a2f4 WHATS_NEW: add entry 2017-02-22 15:20:52 +01:00
David Teigland
263050bc07 man/help: enclose each option in brackets
Placing [] around each individual option is the most
common style, and it improves the readability.
2017-02-21 14:59:52 -06:00
David Teigland
c1ce371b59 man/help: use separate common option lists
There are two kinds of common options:
1. options common to all variants of a given command name
2. options common to all lvm commands

Previously, both kinds of common options were listed together
under "Common options".  Now the first are printed under
"Common options for command" (when needed), and the second
are printed under "Common options for lvm" (always).
2017-02-21 14:32:54 -06:00
David Teigland
b7ae57c6a6 man: teaking output format 2017-02-21 12:27:51 -06:00
David Teigland
21fc35dd1b commands: adjust default help output
Remove the "usage notes" which should just
live in the man pages.

When there are 3 or more variants of a command,
print all the options produces a lot of output,
so require --longhelp to print all the options
in these cases.
2017-02-21 12:27:51 -06:00
David Teigland
f80d373753 man: expand type option description 2017-02-21 12:27:51 -06:00
Alasdair G Kergon
d2dbe71fb3 dmsetup: Indicate device repetition in usage summaries. 2017-02-21 11:25:18 +00:00
David Teigland
86a660be7b man: use .HP instead of .TP 2017-02-20 17:10:11 -06:00
David Teigland
e13639053b man/help: print general raid type as "raid"
Instead of printing "raid*".  There are already
notes mentioning that "raid" refers to "raid<N>"
2017-02-20 15:41:24 -06:00
David Teigland
d22cccdf63 man vgchange/lvchange: note special option usage 2017-02-20 15:36:30 -06:00
David Teigland
2396c50689 man: add variables descriptions
Add a section describing variables.

In the full options list, include common
options in the alphabetical listing instead
of at the end.
2017-02-20 15:36:10 -06:00
David Teigland
4d29d9afb2 lvresize/lvextend: accept type option
The --type option has previously been accepted for
lvresize/lvextend.  Using it did not affect the operation
of the command.  The value was simply verified as matching
the current seg type of the LV.
2017-02-20 11:23:46 -06:00
Zdenek Kabelac
13dd1ca757 cleanup: simplier code
Already know string is 'lvm-' so use name[3].
2017-02-20 00:43:40 +01:00
Zdenek Kabelac
2260c6d1e6 cleanup: same sign for compare 2017-02-20 00:43:40 +01:00
Zdenek Kabelac
d8514b24e1 cleanup: use multiline string 2017-02-20 00:43:40 +01:00
Zdenek Kabelac
aff62c74b7 cleanup: use const 2017-02-20 00:43:40 +01:00
Zdenek Kabelac
2a21a19d90 commands: fix memleak
Keep all allocations 'mempool' allocated for simple cleanup.
2017-02-19 22:59:43 +01:00
Zdenek Kabelac
87c89ac279 lvresize: fix regressiong on accepting args
Commit f45b689406 caused regression
of lvresize -m and --type  parameter

After fix this sequence may work when we also fix syntax description:

lvcreate -l1 -m1 -n lv1 vg
lvextend --type mirror -m1 -l+1 vg/lv1
2017-02-19 22:59:43 +01:00
David Teigland
13944738d4 man/help: fix description of r|R unit 2017-02-17 15:44:26 -06:00
David Teigland
fab0d63121 man: print space before built-in name
print 'lvm config' not 'lvm-config'
2017-02-17 15:33:35 -06:00
David Teigland
50e0345f9d man lvmconfig: refer to typeconfig option name 2017-02-17 14:46:10 -06:00
David Teigland
10cb8e0ec0 man/help: show recently added r|R unit 2017-02-17 14:44:11 -06:00
David Teigland
3cf3943898 args: in yes option mention qq for auto-no 2017-02-17 14:44:11 -06:00
David Teigland
f88ce5fb99 lvconvert: include swap behavior in generic pool syntax
For this syntax:
lvconvert --thinpool LV1 --poolmetadata LV2
lvconvert --cachepool LV1 --poolmetadata LV2

Restore the metadata swapping behavior in addition to
the pool creation behavior.  When LV1 is already a pool,
the metadata LV will be swapped with LV2.
When LV1 is not a pool, it will be converted to a
pool using the specified LV for metadata.

This syntax is no longer advertised because of the
ambiguous behavior.  The primary syntaxes for pool
creation and metadata swapping will be the advertised
methods.
2017-02-17 13:20:15 -06:00
Zdenek Kabelac
56deed9d54 commands: compensate --uuid
As we now user binary search - it's nondeterministict
which of the same 'args' will be give - so duplicates
need 'extra' care.

So provide same hack for output for --uuidstr_ARG as
for input.

Solves 'pvscan -u'.
2017-02-17 13:57:59 +01:00
Zdenek Kabelac
00f299b932 commands: some more dm wrappers
As man-generator is not liked with libdm as of now - some more wrappers.
2017-02-17 13:36:57 +01:00
Zdenek Kabelac
238a79aac4 cleanup: unused uninit vars 2017-02-17 13:20:55 +01:00
Zdenek Kabelac
995f7aa92f cleanup: use strchr for 1-byte lookup 2017-02-17 13:20:55 +01:00
Zdenek Kabelac
46d6c7d3ad cleanup: add comment for longer macro 2017-02-17 13:20:55 +01:00
Zdenek Kabelac
772834e40a commands: optimize binary search
Since there is a lot of options and lot of searches,
use binary search to keep strcmp at minimum.

The interesting part is - alphabetically sorted array contains
duplicates and some of them are not the 'right anwer', so
after we find matching string but not matching long_ARG,
we may need to check if the surrouding strings are the right matching
one.

The single loops is used also for strictly define --foo_long
(i.e. --stripes)  and just differs at final part.

TODO1: replace strstr call with some flag (just like short_opt).
TODO2: drop '--' from being stored and tests by strcmp.
2017-02-17 13:20:55 +01:00
Zdenek Kabelac
582a272b3f commands: use dm_strncpy
Easier code using dm_strncpy() an dm_snprintf().
2017-02-17 13:11:33 +01:00
Zdenek Kabelac
80b717af0c commands: cheap optimisation for parser
Some low-hanging fruits to cut of signification number of strcmp calls.
2017-02-17 13:00:05 +01:00
David Teigland
298b11aed1 commands: track errors in command def parsing
When parsing command defs, track and report all
errors that are found.  Add an error return case
from define_commands so the standard error exit
path is used.
2017-02-16 15:26:42 -06:00
David Teigland
1cb95fa5a0 commands: initialize commands[] once
When using liblvm2cmd, a process can do multiple
init/exit calls, i.e.

lvm2_init(); lvm2_run(); lvm2_exit();
lvm2_init(); lvm2_run(); lvm2_exit();
...

define_commands() needs to set up the global commands[]
definitions only the first time.
2017-02-16 13:59:52 -06:00
David Teigland
15f51bc421 commands: avoid factoring options until needed 2017-02-16 09:37:28 -06:00
David Teigland
22bee4fbdb help/man: remove commas from list of options
Using commas between options does not seem to
be done anywhere else, so remove them.
2017-02-15 15:51:46 -06:00
David Teigland
81c0ed9fc6 commands: use dm wrappers for malloc/free 2017-02-15 15:49:18 -06:00
David Teigland
6a5c9ba349 commands: use existing vg/lv name parsing functions
inside the new lv arg parsing function.

This includes getting the VG name from the env var,
and some added checks on the format of the vg/lv string.
2017-02-15 15:28:54 -06:00
David Teigland
2556498ee1 lvcreate: fix LVM_VG_NAME detection
Commit d3af0e7528 was
not quite right in testing if the env var was set.
2017-02-15 14:10:46 -06:00
David Teigland
4a30f5f9b0 toollib: skip dev prefix from lv names
_get_arg_lvnames_using_options() was missing skip_dev_dir()
2017-02-15 13:42:35 -06:00
David Teigland
286d39ee3c lvconvert: handle old arg quirk when combining snapshot
The old ad hoc arg parsing when combining a split snapshot
allowed the first lv to have a vgname, but not the second.
Since lvconvert now uses the standard arg parsing in
process_each_lv(), the old one-off behavior requires a
work around.
2017-02-15 12:40:35 -06:00
David Teigland
d3af0e7528 lvcreate: LVM_VG_NAME applies even without name arg
There was a small flaw in the logic regarding when LVM_VG_NAME
can replace a VG position arg.
2017-02-15 12:07:51 -06:00
David Teigland
7417c8acfa Revert "lvconvert: enable previous syntax to swap metadata"
This reverts commit 717363bb94.

These alternate forms for swapping metadata cannot be
distinguished from the command for creating a pool.
If we were to add these alternate forms for swapping
metadata, we would need to overload the pool creation
command defs, making those definitions ambiguous.
2017-02-14 16:02:54 -06:00
David Teigland
d2c5bb5c70 coverity cleanups 2017-02-14 15:53:29 -06:00
David Teigland
1236e0ed29 man-generator: fix compiler warnings 2017-02-14 10:28:52 -06:00
David Teigland
1dddb068c9 man/help: use separator in units list
h|H|b|B|... instead of hHbB...
2017-02-14 10:21:39 -06:00
David Teigland
c0f2a59993 commands: skip parsing command defs for other command names
The base command name can be used to skip parsing
command defs that will not be needed.
2017-02-14 10:16:13 -06:00
David Teigland
f46b28bdb6 commands: improve help/usage output
Replace --help --help with --long-help.
Some blank lines were needed.
Add 'lvm help all' to print help for all commands.
2017-02-14 09:52:09 -06:00
Zdenek Kabelac
22457ed4d9 makefiles: missing deps 2017-02-14 10:24:56 +01:00
Zdenek Kabelac
fc0e49297d makefiles: use configure vars
Use binaries found in configure.
2017-02-14 10:24:56 +01:00
David Teigland
5a87d8667d coverity cleanups for recent command defs commits 2017-02-13 16:11:04 -06:00
David Teigland
717363bb94 lvconvert: enable previous syntax to swap metadata 2017-02-13 14:41:54 -06:00
David Teigland
b2fd5b31d3 commands: suggest --help if command doesn't match 2017-02-13 13:46:17 -06:00
David Teigland
698abdde16 generate man pages 2017-02-13 10:31:23 -06:00
David Teigland
13a6368522 args: use arg parsing function for region size
Consolidate the validation of the region size arg
in a new arg parsing function.
2017-02-13 08:21:58 -06:00
David Teigland
a1386dcca0 lvconvert: remove code for changing region size
from the generic raid type conversion code.
2017-02-13 08:21:58 -06:00
David Teigland
46abc28a48 lvconvert: add command to change region size of a raid LV 2017-02-13 08:21:58 -06:00
David Teigland
8152e4a99e vgchange: fix uint32 parsing of logicalvolume arg 2017-02-13 08:20:10 -06:00
David Teigland
2224b6a701 commands: recognize raid variations 2017-02-13 08:20:10 -06:00
David Teigland
c3faa5816d commands: move command def parsing into lvm binary
It was previously done at build time by the ccmd binary.
2017-02-13 08:20:10 -06:00
David Teigland
942dc07402 lvconvert: remove unused code
For "split" which is not an alias for splitmirrors.
2017-02-13 08:20:10 -06:00
David Teigland
f067c0ad78 args: split is a synonym for splitcache
also tidy the other synonyms
2017-02-13 08:20:10 -06:00
David Teigland
15d9f2850e ccmd: split into multiple files 2017-02-13 08:20:10 -06:00
David Teigland
013c080756 command struct: remove command name refs
Change run time access to the command_name struct
cmd->cname instead of indirectly through
cmd->command->cname. This removes the two run time
fields from struct command.
2017-02-13 08:20:10 -06:00
David Teigland
d9d5b8414b command.h comment tidying 2017-02-13 08:20:10 -06:00
David Teigland
9a0f0c70bf lvm shell: clear argv for each command 2017-02-13 08:20:10 -06:00
David Teigland
23a1ced439 help: accept positional args
lvm help <commandname> ...
2017-02-13 08:20:10 -06:00
David Teigland
3642deb4f3 fix lvmcmdline warning
declaration of ‘usage’ shadows a globa
2017-02-13 08:20:10 -06:00
David Teigland
5c779b3231 args: add man page descriptions 2017-02-13 08:20:10 -06:00
David Teigland
db26a82f2f args: use uint32 arg for maxphysicalvolumes 2017-02-13 08:20:10 -06:00
David Teigland
041c2fef88 lvconvert: remove unused code 2017-02-13 08:20:10 -06:00
David Teigland
46b2599d5c lvconvert: use command defs for raid/mirror types
All lvconvert functionality has been moved out of the
previous monolithic lvconvert code, except conversions
related to raid/mirror/striped/linear.  This switches
that remaining code to be based on command defs, and
standard process_each_lv arg processing.  This final
switch results in quite a bit of dead code that is
also removed.
2017-02-13 08:20:10 -06:00
David Teigland
86d8ab493b lvconvert: use command defs for mergemirrors
and route the generic --merge to one of the
specific merge functions
2017-02-13 08:20:10 -06:00
David Teigland
95e38607ec toollib: find VG name in option values when needed 2017-02-13 08:20:10 -06:00
David Teigland
0e3e611a13 lvconvert: use command defs for thin/cache/pool creation
Everything related to thin and cache.
2017-02-13 08:20:10 -06:00
David Teigland
d71aaca07b lvconvert: add startpoll command using command def
This is a new explicit version of 'lvconvert LV'
which has been an obscure way of triggering polling
to be restarted on an LV that was previously converted.
2017-02-13 08:20:10 -06:00
David Teigland
fa2a728a39 lvconvert: snapshot: use command definitions
Lift all the snapshot utilities (merge, split, combine)
out of the monolithic lvconvert implementation, using
the command definitions.  The old code associated with
these commands is now unused and will be removed separately.
2017-02-13 08:20:10 -06:00
David Teigland
254bffb95d lvconvert: remove unused calls for repair and replace
repair and replace are no longer called from the
monolithic lvconvert code, so remove the unused code.
2017-02-13 08:20:10 -06:00
David Teigland
35b9d4d6e9 lvconvert: repair and replace: use command definitions
This lifts the lvconvert --repair and --replace commands
out of the monolithic lvconvert implementation.  The
previous calls into repair/replace can no longer be
reached and will be removed in a separate commit.
2017-02-13 08:20:10 -06:00
David Teigland
52c60b7e7b lvchange: make use of command definitions
Reorganize the lvchange code to take advantage of
the command definition, and remove the validation
that is done by the command definintion rules.
2017-02-13 08:20:10 -06:00
David Teigland
9c6c55c314 process_each_lv: add check_single_lv function
The new check_single_lv() function is called prior to the
existing process_single_lv().  If the check function returns 0,
the LV will not be processed.

The check_single_lv function is meant to be a standard method
to validate the combination of specific command + specific LV,
and decide if the combination is allowed.  The check_single
function can be used by anything that calls process_each_lv.

As commands are migrated to take advantage of command
definitions, each command definition gets its own entry
point which calls process_each for itself, passing a
pair of check_single/process_single functions which can
be specific to the narrowly defined command def.
2017-02-13 08:20:10 -06:00
David Teigland
1e2420bca8 commands: new method for defining commands
. Define a prototype for every lvm command.
. Match every user command with one definition.
. Generate help text and man pages from them.

The new file command-lines.in defines a prototype for every
unique lvm command.  A unique lvm command is a unique
combination of: command name + required option args +
required positional args.  Each of these prototypes also
includes the optional option args and optional positional
args that the command will accept, a description, and a
unique string ID for the definition.  Any valid command
will match one of the prototypes.

Here's an example of the lvresize command definitions from
command-lines.in, there are three unique lvresize commands:

lvresize --size SizeMB LV
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync, --reportformat String, --resizefs,
--stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB
OP: PV ...
ID: lvresize_by_size
DESC: Resize an LV by a specified size.

lvresize LV PV ...
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync,
--reportformat String, --resizefs, --stripes Number, --stripesize SizeKB
ID: lvresize_by_pv
DESC: Resize an LV by specified PV extents.
FLAGS: SECONDARY_SYNTAX

lvresize --poolmetadatasize SizeMB LV_thinpool
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync,
--reportformat String, --stripes Number, --stripesize SizeKB
OP: PV ...
ID: lvresize_pool_metadata_by_size
DESC: Resize a pool metadata SubLV by a specified size.

The three commands have separate definitions because they have
different required parameters.  Required parameters are specified
on the first line of the definition.  Optional options are
listed after OO, and optional positional args are listed after OP.

This data is used to generate corresponding command definition
structures for lvm in command-lines.h.  usage/help output is also
auto generated, so it is always in sync with the definitions.

Every user-entered command is compared against the set of
command structures, and matched with one.  An error is
reported if an entered command does not have the required
parameters for any definition.  The closest match is printed
as a suggestion, and running lvresize --help will display
the usage for each possible lvresize command.

The prototype syntax used for help/man output includes
required --option and positional args on the first line,
and optional --option and positional args enclosed in [ ]
on subsequent lines.

  command_name <required_opt_args> <required_pos_args>
          [ <optional_opt_args> ]
          [ <optional_pos_args> ]

Command definitions that are not to be advertised/suggested
have the flag SECONDARY_SYNTAX.  These commands will not be
printed in the normal help output.

Man page prototypes are also generated from the same original
command definitions, and are always in sync with the code
and help text.

Very early in command execution, a matching command definition
is found.  lvm then knows the operation being done, and that
the provided args conform to the definition.  This will allow
lots of ad hoc checking/validation to be removed throughout
the code.

Each command definition can also be routed to a specific
function to implement it.  The function is associated with
an enum value for the command definition (generated from
the ID string.)  These per-command-definition implementation
functions have not yet been created, so all commands
currently fall back to the existing per-command-name
implementation functions.

Using per-command-definition functions will allow lots of
code to be removed which tries to figure out what the
command is meant to do.  This is currently based on ad hoc
and complicated option analysis.  When using the new
functions, what the command is doing is already known
from the associated command definition.
2017-02-13 08:20:10 -06:00
Zdenek Kabelac
a3579aafc5 cleanup: use matching signed number comparation 2017-02-13 10:06:19 +01:00
Ondrej Kozina
035c614c19 dmsetup: do not suppress kernel key descriptions in tables
Kernel 4.10 (dm-crypt v1.15.0) and later supports loading device
tables with crypt segment having key in kernel keyring retention
service.

dmsetup hid key section of tables output. With this patch dmsetup
no longer hides key section if it detects kernel key description
instead of hex byte representation of key itself.
2017-02-10 19:18:49 +01:00
Heinz Mauelshagen
46a772fbc4 lvconvert: add support to change RAID region size (fixup)
Commit cfb6ef654d introduced
support to change RAID region size.

Add:
- missing conditions to support any types to function with
  it in lv_raid_convert();  temporary workaround used until
  cli validation patches get merged
- tests requesting "-R " to lvconvert-raid-takeover.sh
  involving a cleanup of the script

Related: rhbz1392947
2017-02-07 16:52:04 +01:00
Heinz Mauelshagen
cfb6ef654d lvconvert: add support to change RAID region size
Add:
- support to change region size of existing RaidLVs
  (all RAID LV types but raid0/raid0_meta)
- lvconvert-raid-regionsize.sh with test variations
  for different RAID types and region sizes

Resolves: rhbz1392947
2017-02-07 01:01:19 +01:00
Bryn M. Reeves
b999d5f501 dmstats: allow --filemap groups to be updated
Add a new update_filemap command to dmstats that allows a filemap
group to be updated:

  # dmstats update_filemap --groupid 0 vm.img
  /var/lib/libvirt/images/vm.img: Updated group ID 0 with 137 region(s).

This will update the set of regions mapped to the file to reflect
the current file system allocation.

Currently this needs to be run manually - a future update will add
support for monitoring file maps via a daemon, allowing them to be
automatically updated when the underlying file is modified.
2017-01-25 16:15:21 +00:00
Zdenek Kabelac
4a7f2155c1 clean: move code to lib part
Move actual processing part of the lvm2_disable_dmeventd_monitoring()
into a /lib part so we can reuse the code later for other cases.
2017-01-23 14:55:28 +01:00
Zdenek Kabelac
d80f9a107f lvmcmd2lib: support new command
Internal command which reads lvm.conf settins and passes it
via envvar to dmeventd monitoring thread.
2017-01-20 23:55:07 +01:00
Zdenek Kabelac
0d2a9ebec6 vgchange: also -l is uint32 2017-01-06 21:51:36 +01:00
Zdenek Kabelac
74969c9a38 report: report merged state for inactive LV
This was missing piece in 77997c7673.
When merging origin is inactive (while driver is loaded) we
could already report merge in progress values as there is
no way to activate 'old state' now.
2017-01-05 15:54:14 +01:00
Zdenek Kabelac
1f5dde38a7 cleanup: more use of lvseg_name
Use existing function lvseg_name().
2017-01-03 14:55:16 +01:00
Zdenek Kabelac
4fd41cf67f vgchange: max_pv limited to uint32
Solves: https://bugzilla.redhat.com/1280496

The only reasonable behaviour here is to error on
any number out of accepted range (i.e. now numbers
wrapping around with some hidden logic).

As this is plain bug there is no support for
backward compatibility since noone should
set numbers >UINT32_MAX and expect 0 or error
depending on how big number was used....

TODO: more fields might need to be converted.
2017-01-03 14:55:16 +01:00
Zdenek Kabelac
9f65a3f0c5 lvmcmdline: support uint32
Add simple function to wrap usage for only uint32 numbers.
Unlike  'int_arg'  which accepts full range of 64bit number
this function will error on numbers out of this range:

   <0, UINT32_MAX>
2017-01-03 14:55:16 +01:00
Zdenek Kabelac
77997c7673 report: show proper info for merging origin
When there is 'merging' of an origin in progress, but metadata stil
do provide both origin and snapshot, we should show data from merged
snapshot.  This is important mainly for thin case, where there was
a window, where i.e. 'lvs -o+device_id' would report information
about 'already gone' origin thin LV.

This race window is usually hard to trigger but can be ocasionally hit.
Usually shortly after activation, but before polling process manages
to update metadata after merge.
2016-12-22 23:37:07 +01:00
Zdenek Kabelac
2aee4769b4 snapshot: validate merge has started
Before starting polling process, validate the merge has actually started
so there is not pointless invoke of lvmpolld.

This also fixes reported message from command, so user has
correct info whether merging has already started or
if it's delayed for next activation.
2016-12-22 23:37:07 +01:00
Zdenek Kabelac
0c56eb8f43 cache: support cached origin for snapshot
Enable  'lvcreate/lvconvert -s' for cached LV.
and supported operations:

Create a snapshot of cached LV

Split/Join snapshot LV to cached origin LV.
2016-12-19 14:41:42 +01:00
Zdenek Kabelac
eb3f83357a lvconvert: fix shown lv name for snapshot split
We can't keep 'display_lvname' for too long - it's using
ringbuffer and keeps limited number of names. So it's
safe only per few simple tests,  but can't be used anymore
after some function calls..
(Fixes 00e641ef37)
2016-12-19 14:41:16 +01:00
Bryn M. Reeves
c90e9392e4 libdm: add dm_stats_bind_from_fd()
dmsetup already has a version of this function, and dmfilemapd will
need it too: move it to libdevmapper to avoid copying it around.
2016-12-18 20:47:17 +00:00
Zdenek Kabelac
5bb6266046 lvconvert: support cache to external origin conversion
Add this functionality to lvconvert:

'lvconvert --thin cachedLV --thinpool vg/poll'

Converts cachedLV to external origin (which will be read-only).
New thin volume is created in thinpool LV and it's using external
origin as source for unprovisioned chunks.
This conversion happens  online (while volume is in use).
Thin LV remains fully writable.
Cached external origin no longer could be written so cache will be used
ONLY for read operations. For this limitation we require cache mode
to be writethrough (as writeback cannot write to read-only volumes).

When  thinLV is later removed  cached external origin is again
fully usable, just note, LV remain in 'read-only' mode.
When read-write is needed,  'lvchange -prw' has to be used.

Single external origin could be user by multiple thinLV in
multiple differen thin pool.
2016-12-18 19:35:27 +01:00
Bryn M. Reeves
a15f0d181c dmstats: don't declare _start_timestamp if HAVE_SYS_TIMERFD_H
The _start_timestamp is not used by the TIMERFD clock.
2016-12-18 14:08:11 +00:00
Bryn M. Reeves
3e53adf7c0 dmstats: fix TIMERFD _timer_running() test 2016-12-18 14:07:25 +00:00
Bryn M. Reeves
5a4750d76c dmstats: fix interval number reporting with --count=0
When --count=0 interval numbers are miscalculated:

Interval     #18446744069414584325     time delta:    999920887ns
Interval     #18446744069414584325   current err:       -79113ns
End interval #18446744069414584325  duration:    999920887ns

This is because the command line argument is cast through the
uint32_t type, and fixed to UINT32_MAX:

  _count = ((uint32_t)_int_args[COUNT_ARG]) ? : UINT32_MAX;

We also need to handle --count=0 specially when calculating the
interval number: since intervals count from #1, this must account
for the implicit "minus one" when converting from zero to the
UINT64_MAX value used (which is too large to store in _int_args).
2016-12-18 13:03:45 +00:00
Bryn M. Reeves
5635cd3b03 dmstats: separate TIMERFD and useleep() exit conditions
The time management code mixes tests of the _timer_fd value with
code that should be timer agnostic: this causes problems for users
of the usleep() timer, since it cannot properly detect the start
of a new interval:

Beginning first interval
Interval     #18446744069414584348     time delta:   1000000000ns
Interval     #18446744069414584348   current err:            0ns
End interval #18446744069414584348  duration:   1000000000ns
Adjusted sample interval duration:   1000000000ns
[...]
Beginning first interval
Interval     #18446744069414584349     time delta:   1000000000ns
Interval     #18446744069414584349   current err:            0ns
End interval #18446744069414584349  duration:   1000000000ns
Adjusted sample interval duration:   1000000000ns

Separate these out, by defining a _timer_running() call that each
timer implements, and only define _timer_fd if we are compiling
with TIMERFD enabled.
2016-12-18 13:03:44 +00:00
Bryn M. Reeves
886b4f755d dmstats: use better interval estimate for usleep() timer
Although the usleep() interval timer is not used if the Linux
TIMERFD interface is available it should still provide reasonably
good timing.

Instead of trying to estimate the error from the duration of the
last sleep, peg it to the start time of the program, and use the
value of  ((start_time - now) % interval) to correct the current
interval duration.

This always pulls us back into sync at the end of each interval,
rather than relying on trying to incrementally adjust the time
duration at each interval start.

This greatly reduces drift when the usleep() clock is used.
2016-12-18 13:03:44 +00:00
Bryn M. Reeves
68ec42ebaf dmstats: improve tool help output and option coverage 2016-12-18 11:51:13 +00:00
Zdenek Kabelac
a8f5e1f274 cleanup: more lv_is_ usage 2016-12-13 22:07:52 +01:00
Zdenek Kabelac
b8c729efd0 cov: add internal error for impossible code path 2016-12-11 23:24:19 +01:00
Zdenek Kabelac
6cd68c55dd cleanup: reuse existing function
Call lv_update_and_reload implementation.
2016-12-11 23:24:19 +01:00
Zdenek Kabelac
3903f915f8 pvmove: fix activation order
For proper locking we need to gain lock first for mirror which
needs to be deactivated later to be working in cluster.
2016-12-11 23:22:36 +01:00
Zdenek Kabelac
6fd20be629 activation: lv_info_with_seg_status API change
Drop LV from passed API arg - it's always segment being checked.
Also use_layer is now in full control of lv_info_with_seg_status().
It decides which device needs to be checked to get 'the most info'.

TODO: future version should be able to expose status from
2016-12-05 17:09:47 +01:00
Zdenek Kabelac
ed93f0973a activation: lv_info_with_seg_status unify status selection
Start moving selection of status taken for a LV into a single place.
The logic for showing info & status has been spread over multiple
places and were doing too complex decision going agains each other.

Unify selection of status of origin & cow scanned device.

TODO: in future we want to grab status for LV and layered LV and have
both statuses present for display - i.e. when 'old snapshot'
of thinLV is takes and there is ongoing merge - at some moment
we are not capable to show all needed info.
2016-12-05 17:09:13 +01:00
Zdenek Kabelac
c10028dd8e cleanup: add missing WARNING into log_warn 2016-11-25 15:01:27 +01:00
Zdenek Kabelac
1a4f13eb6e cleanup: add some dots and use display_lvname
Just some more VG/LV printing.
2016-11-25 15:01:27 +01:00
Zdenek Kabelac
1d58074d9f debug: more stacktrace corrections
Continue previous patch dropping some unneeded stack traces
after printed log_error/warn messages.
2016-11-25 14:58:28 +01:00
Zdenek Kabelac
a7404b5b83 debug: stack tracing corrections 2016-11-23 17:55:03 +01:00
Zdenek Kabelac
c621bc3d36 cleanup: deactivate has builtin check for active lv 2016-11-23 17:55:03 +01:00
Zdenek Kabelac
5fd5cfe061 cleanup: use display_lvname and msg cleanup
Use display_lvname in tracing messages.
Add some missing 'dots' to messages.
2016-11-23 17:48:01 +01:00
Zdenek Kabelac
851095a6af raid: lvconvert uses transient check for raid
Also check if the raid status isn't teling us there is something wrong
with any raid image device.
2016-11-23 17:46:50 +01:00
Zdenek Kabelac
59b29716e5 lvconvert: repair accepts interval and background
For mirror and raid we expose --interval and --background on
command line (instead of using just always using compiled-in defaults).
2016-11-11 16:51:33 +01:00
Alasdair G Kergon
f8b3b0bc9a lvconvert: Introduce enum to separate cases.
Start to separate out the different things that lvconvert does by using
an enum to identify 12 distinct cases.
2016-11-11 00:27:01 +00:00
Heinz Mauelshagen
b11f4f93d7 dmsetup: [v2] return 0 for [--]{version,help}
Leverage 0b1c796420 to cope with "dmsetup SubCommand --{help,version}"
and bail out directly when _report_init() fails.

Related: rhbz1393692
2016-11-10 18:09:37 +01:00
Heinz Mauelshagen
0b1c796420 dmsetup: return 0 for [--]{version,help}
dmsetup regressed returning 1 when properly processing
version or help subcommands.

Resolves: rhbz1393692
2016-11-10 17:03:04 +01:00
Zdenek Kabelac
4e26024add cleanup: use WARNING prefix for log_warn
Use capital WARNING prefix for log_warn() messages.
2016-11-03 17:49:07 +01:00
David Teigland
68e7d34965 pvscan: fix autoactivation of exported VG
pvscan --cache -aay was activating LVs in exported VGs
when it should not.

It appears that this was a regression from commit 9b640c3684
"pvscan: use process_each_vg for autoactivate".
2016-11-02 16:29:52 -05:00
Heinz Mauelshagen
8270ff5702 lvconvert: prevent non-synced raid1 primary leg repair
(Automatic) repair may not be allowed during the initial sync of an upconverted
linear LV, because the data on the failing, primary leg hasn't been completely
synchronized to the N-1 other legs of the raid1 LV (replacing failed legs during
repair involves discontinuing access to any replaced legs data, thus preventing
data recovery on the primary leg e.g. via dd_rescue).

Even though repair would not cause data loss when adding legs to a fully synced
raid1 LV, we don't have information yet defining this state yet (e.g. a raid1
LV flag telling the fully synchronized status before any legs were added),
hence can't automatically decide to allow to repair.

If nonetheless a repair on a non-synced raid1 LVs is intended, the "--force"
option has to be provided.

Resolves: rhbz1311765
2016-10-28 15:55:10 +02:00
Heinz Mauelshagen
e118b65d65 lvconvert: check for supported raid0/raid4 segtypes
Validate kernel support for raid0/raid4 on given and
requested segtype before requesting conversions on them.

Because raid10 wasn't present in old RAID targets, add
the same validation to be prepared once we support them.
2016-10-27 16:44:32 +02:00
Heinz Mauelshagen
ff05ed7afd lvchange/vgchange/lvconvert: prevent raid4 creation/activation/conversion on non-supporting raid targets
Check for dm-raid target version with non-standard raid4 mapping expecting the dedicated
parity device in the last rather than the first slot and prohibit to create, activate or
convert to such LVs from striped/raid0* or vice-versa in order to avoid data corruption.

Add related tests to lvconvert-raid-takeover.sh

Resolves: rhbz1388962
2016-10-27 11:42:07 +02:00
Heinz Mauelshagen
e84f527cd3 lvconvert: revert to only letting raid4 through to lv_raid_convert()
Commit de78e8eae7 allowed to let any raid layout through
which we want to avoid until further validation cleanups.

Related to rhbz1386184
2016-10-26 17:54:19 +02:00
Bryn M. Reeves
021715e897 dmsetup: remove stray '\n' in delete log message 2016-10-24 17:21:35 +01:00
Bryn M. Reeves
5eda393488 dmsetup: obey --programid when deleting regions 2016-10-24 17:21:18 +01:00
Heinz Mauelshagen
de78e8eae7 lvconvert: position dedicated parity device in raid4 conversions porperly
On conversions between striped/raid0* and raid4, the kernel expects
the dedicated raid4 parity SubLVs in the first segment area rather than
in the last it's been allocated to, thus the data mapping ain't proper.

Enhance lvconvert (lib/metadata/raid_manip.c) to shift the dedicated
parity SubLVs on conversions from striped/raid0* to raid4 and vice-versa.

In case of raid0_meta -> raid4 where the MD raid0 personality already has
stored RAID array device positions in the superblocks, the MetaLVs have to
be cleared so that the kernel doesn't fail validating the array positions
after lvm has shifted them up by one.

Add more tests to lvconvert-raid-takeover.sh including one to check for
mapping flaws by converting a created raid4 with filesystem -> striped
and fsck it.

Whilst on it:
- add missing direct striped -> raid4 conversion to the takeover array
  to avoid an intermim conversion from striped -> raid0*
- clean up the takeover array
- allow lvconvert to actually call lv_raid_convert() on all takeover requests
  in order to check parameters and display messages provided by takeover
  functions rather than just "...not supported" from within lvconvert
- fix a typo

Resolves: rhbz1386148
2016-10-21 19:00:31 +02:00
Alasdair G Kergon
34da83d729 dmsetup: Produce partial output if dev disappears.
If a device disappears after obtaining the list of devices but before
processing it as a member of that list, dmsetup exits with a failure code.

Most commands still produce what output they can in these circumstances,
but 'ls --tree' and 'info -c' with fields depending on device dependencies
didn't.  Change this.
2016-10-18 18:01:52 +01:00
Zdenek Kabelac
900e899739 lvconvert: still use strcmp for now
Keep for now function logic making its decision on string content.
We need bigger patch converting all things to bit-checks later.
This needs however bigger refactoring.
So this commit reverts some changes from:
c8b6c13015
2016-10-12 11:18:23 +02:00
Heinz Mauelshagen
8859d4508a lvconvert: fix RAID SubLV --splitmirror regression
Commit 088b3d036a allowed repair on cache origin RAID LVs
and restricted lvconvert actions on RAID SubLVs to change number of mirrors, repair,
replace and type changes in order to avoid unsuitable coversions on them.

This introduced a regression prohibiting --splitmirrors on any RAID SubLVs
(e.g. of cache or thin LVs; lvconvert-{cache,thin}-raid.sh tests failing).

Fix allows split mirrors again.

Fix some indenting whilst on it.
2016-10-12 00:24:57 +02:00
Zdenek Kabelac
8f30069160 cleanup: indent 2016-10-11 13:37:43 +02:00
Zdenek Kabelac
6f576483a8 cleanup: lvconvert drop unused variable 2016-10-11 13:37:43 +02:00
Zdenek Kabelac
c8b6c13015 cleanup: use already set values
When we have already decoded arg_is_set into a local var
or already set  segment type - already use these
values instead of repeating calls and string checks.
2016-10-11 13:37:43 +02:00
Zdenek Kabelac
f4ae43934a cleanup: reorder code
Move some arg test into a single place with sort of alphabetic order
when possible to make reading easier.
2016-10-11 13:37:43 +02:00
Zdenek Kabelac
706d3ddf90 lvconvert: use _read_conversion_type
Code reodering and using same pattern for reading and validating arg
(--type in this case).
2016-10-11 13:36:51 +02:00
Zdenek Kabelac
1186cf2ad4 lvconvert: fix error value
Seems some error path where not converted to 'new' ECMD return value.
Fix them to always 'goto out'.
Also drop unneeded   'ret = 0' when ret already is 0.
2016-10-11 13:36:29 +02:00
Heinz Mauelshagen
088b3d036a lvconvert: certain repair of cache raid volumes fails "Cannot convert internal LV"
In case a RAID orig LV is being cached and fails, repair is impossible because
"lvconvert --repair" gets rejected.

Fix by allowing repair on cache orig RAID LVs and
"lvconvert --replace/--mirrors/--type {raid*|mirror|striped|linear}" as well.

Allow the same lvconvert actions on any cache pool and metadata RAID SubLVs.

Resolves: rhbz1380532
2016-10-10 17:31:29 +02:00
David Teigland
bf5d0a2651 toollib: clean up coverity issue
in processing duplicate pvs.
2016-10-04 16:25:32 -05:00
Alasdair G Kergon
c900cf7ed4 Revert "cleanup: simplier assign of cmd vars"
This reverts commit cea441f4d1.

cmd->default_values is configurable and this code should not make
any assumptions about values it holds.
2016-10-03 18:14:17 +01:00
Zdenek Kabelac
77ffd39dfb cleanup: drop test for NULL
Since lp->segtype has been already checked for not-being NULL,
drop this test so Coverity is not later confused it 'can be a NULL'.
2016-10-03 17:49:56 +02:00
Zdenek Kabelac
cea441f4d1 cleanup: simplier assign of cmd vars
Directly assign queried args as they provide matching values for
a setting.
2016-10-03 17:49:55 +02:00
Peter Rajnoha
e40fbd08c8 config: parse config tree without dup node checking if it's metadata tree 2016-09-21 18:16:05 +02:00
Peter Rajnoha
094488ffab cleanup: remove unused variables 2016-09-21 15:53:50 +02:00
Peter Rajnoha
926a565781 coverity: dmsetup: fix possible use of uninitialized value 2016-09-21 15:52:23 +02:00
Bryn M. Reeves
7ea5758c91 dmsetup: ensure --filemap histogram bounds are freed
Make sure that the temporary dm_histogram used for the bounds
argument is freed in the case that the user provided a --bounds
argument on the command line.
2016-09-21 10:09:20 +01:00
Heinz Mauelshagen
5d455b28fc lvconvert: fix (automatic) raid repair regression
The dm-raid target now rejects device rebuild requests during ongoing
resynchronization thus causing 'lvconvert --repair ...' to fail with
a kernel error message. This regresses with respect to failing automatic
repair via the dmeventd RAID plugin in case raid_fault_policy="allocate"
is configured in lvm.conf as well.

Previously allowing such repair request required cancelling the
resynchronization of any still accessible DataLVs, hence reasoning
potential data loss.

Patch allows the resynchronization of still accessible DataLVs to
finish up by rejecting any 'lvconvert --repair ...'.

It enhances the dmeventd RAID plugin to be able to automatically repair
by postponing the repair after synchronization ended.

More tests are added to lvconvert-rebuild-raid.sh to cover single
and multiple DataLV failure cases for the different RAID levels.

- resolves: rhbz1371717
2016-09-21 00:39:29 +02:00
Zdenek Kabelac
0e8449a5b9 thin: fix lvchange of discards and zero flag
Reload of thin-pool origin_only is designed to only post messages
to a thin-pool. It's not intended to be used for reload of thin-pool
table. Fix it by using standard call  'lv_update_and_reload()'.
2016-09-19 14:00:56 +02:00
Zdenek Kabelac
4b22cd81e6 cache: report metadata percentage
Reinstantiate reporting of metadata percent usage for cache volumes.
Also show the same percentage with hidden cache-pool LV.
This regression was caused by optimization for a single-ioctl in
2.02.155.
2016-09-09 15:01:35 +02:00
Brassow Jonathan
5838c41a35 cache: scrubbing for cache origin LV - Bug 1169495
Allow RAID scrubbing on cache origin sub-LV

This patch adds the ability to perform RAID scrubbing on the cache
origin sub-LV (https://bugzilla.redhat.com/1169495).  Cache origin
operations are restricted to non-clustered RAID LVs until there can
be further testing in a cluster (even for exclusive activation).

User can either specify directly _corig LV
or he can specify cache LV and operation  --syncation is
passed ONLY to   _corig LV.

If users wants to manipulation with cache-pool devices - he
needs to specify this object name.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
2016-09-07 16:42:32 +02:00
Alasdair G Kergon
be85c22f65 raid10: Fix #stripes in lvcreate msg when too many. 2016-08-30 12:04:23 +01:00
Zdenek Kabelac
b493811968 cache: introduce cache_pool_max_chunks
Introduce 'hard limit' for max number of cache chunks.
When cache target operates with too many chunks (>10e6).

When user is aware of related possible troubles he
may increase the limit in lvm.conf.

Also verbosely inform user about possible solution.

Code works for both lvcreate and lvconvert.

Lvconvert fully supports change of chunk_size when caching LV
(and validates for compatible settings).
2016-08-29 20:47:31 +02:00
Peter Rajnoha
e758d722c7 conf: fix typo in report/columns_as_rows config option name recognition
Commit e947c362dd introduced
config_settings.h file for central place to store all definitions for
config options. By mistake, it used report/colums_as_rows instead
of report/columns_as_rows (missing "n" in "columns").
2016-08-25 14:53:32 +02:00
Alasdair G Kergon
7837fbc1c1 lvconvert: Disallow raid10 mirror conversions. 2016-08-23 23:40:16 +01:00
Alasdair G Kergon
896912b14d lvcreate: Never treat raid0 as linear.
raid0 and raid0_meta require, or default to, at least 2 stripes.
2016-08-19 23:57:30 +01:00
Alasdair G Kergon
88e6abc5a0 lvconvert: Don't allow --repair on raid0 LVs. 2016-08-19 23:42:01 +01:00
Alasdair G Kergon
e192fde687 lvcreate: Drop warning messages for number of raid stripes.
It's now just setting a default, not adjusting the user's parameter.
2016-08-19 14:53:33 +01:00
Alasdair G Kergon
ea0f604e70 lvcreate: No longer adjust --stripes for raid types.
If the number of stripes requested is incompatible with the requested
type of raid, give an error instead of adjusting it.

If no stripes argument is supplied, continue to use an appropriate
default.
2016-08-19 14:19:51 +01:00
Alasdair G Kergon
c1a0a2c712 toollib: Record whether or not stripes/stripe_size args supplied. 2016-08-19 13:51:43 +01:00
Heinz Mauelshagen
c0a0eedf2e vgsplit: fix regression processing thin external origins
a579ba2ac2 fixed a regression causing a segfault if no external
origin existed but broke the logic leading to erroneous error
messages and creations of split off exported VGs in case the
external origin and the pool LVs were allocated on different PVs.

- resolves rhbz1367459
2016-08-16 23:57:09 +02:00
Heinz Mauelshagen
73df2aedf9 lvcreate: better error message creating RAID LV on < 4 KiB VG extent size
Creating a RaidLV in VGs with very small extent sizes caused
late failure in the kernel giving a not very informative error
message. Catch the attempt early and display failure message
'Unable to create RAID LV: requires minimum VG extent size 4.00 KiB'.

- resoves rhbz1179970
2016-08-16 13:39:40 +02:00
Alasdair G Kergon
114db6f745 tools: Suppress some unnecessary --stripesize warnings.
https://bugzilla.redhat.com/1366745
2016-08-15 19:38:45 +01:00
Heinz Mauelshagen
d83f2d766d pvmove: fix regression introduced with 8e9d5d12ae
'pvmove -n name pv1 pv2' called with the name of a top-level LV
failed with mentioned commit.

Enhance pvmove-raid-segtypes.sh to test for prohibited RAID SubLV moves.
2016-08-15 19:31:04 +02:00
Heinz Mauelshagen
8e9d5d12ae pvmove: prohibit non-resilient collocation of RAID SubLVs
'pvmove -n name pv1 pv2' allows to collocate multiple RAID SubLVs
on pv2 (e.g. results in collocated raidlv_rimage_0 and raidlv_rimage_1),
thus causing loss of resilence and/or performance of the RaidLV.

Fix this pvmove flaw leading to potential data loss in case of PV failure
by preventing any SubLVs from collocation on any PVs of the RaidLV.
Still allow to collocate any DataLVs of a RaidLV with their sibling MetaLVs
and vice-versa though (e.g. raidlv_rmeta_0 on pv1 may still be moved to pv2
already holding raidlv_rimage_0).

Because access to the top-level RaidLV name is needed,
promote local _top_level_lv_name() from raid_manip.c
to global top_level_lv_name().

- resolves rhbz1202497
2016-08-15 18:22:32 +02:00
Heinz Mauelshagen
a185a2bea2 lvcreate/lvconvert: fix validation of maximum mirrors/stripes
Enforce mirror/raid0/1/10/4/5/6 type specific maximum images when
creating LVs or converting them from mirror <-> raid1.

Document those maxima in the lvcreate/lvconvert man pages.

- resolves rhbz1366060
2016-08-12 19:14:28 +02:00
Peter Rajnoha
2fed8d8515 lvmcmdline: use long int for number returned by strtol 2016-08-10 09:10:37 +02:00
Peter Rajnoha
5ac008116b report: add report_reset_cmdlog_seqnum and call it for each new cmd executed in lvm shell 2016-08-09 18:49:11 +02:00
Peter Rajnoha
e8985c71bc config: add support for CFG_DISALLOW_INTERACTIVE flag to mark settings as not suitable for override in interactive mode
Some settings are not suitable for override in interactive/shell
mode because such settings may confuse the code and it may end
up with unexpected behaviour. This is because of the fact that
once we're in the interactive/shell mode, we have already applied
some settings for the shell itself and we can't override them
further because we're already using those settings to drive the
interactive/shell mode. Such settings would get ignored silently
or, in worse case, they would mess up the existing configuration.
2016-08-09 18:49:11 +02:00
Peter Rajnoha
7111d48748 lvm: shell: honor log/command_log_selection as default and reset to this value after lastlog 2016-08-09 18:49:11 +02:00
Peter Rajnoha
e805ef2d66 lvmcmdline: profile: early profile load for lvm shell
Make it possible to also load profile for lvm shell by honouring
LVM_COMMAND_PROFILE environment variable.
2016-08-09 18:49:11 +02:00
Peter Rajnoha
f21afddeb7 lvm: shell: extend log report to cover whole lvm shell's main loop
When lvm commands are executed in lvm shell, we cover the whole lvm
command execution within this shell now. That means, all messages logged
and status caught during each command execution is now recorded in the
log report, including overall command's return code.
2016-08-09 18:49:10 +02:00
Peter Rajnoha
5649834f7d lvmcmdline: return 0/NULL if cmd->arg_values not set and arg_count/grouped_arg_count/arg_value called
We may call arg_count/grouped_arg_count/arg_value soon enough that
cmd->arg_values is not set yet.

Normally, when running a command, we execute lvm_run_command which in
turn calls _process_command_line to allocate and parse the command line
values and stores them in cmd->arg_values.

However, if we run lvm shell, this one doesn't accept any command line
options and we parse the command line for each command that is executed
within the lvm shell then. If we used any code that tries to access
cmd->arg_values through any of the the arg handling functions too
early, we could end up with a segfault due to uninitialized (NULL)
cmd->arg_values.

This patch just saves extra checks in all the code where arg handling
may be called too early so that the cmd->arg_values is not set up yet.
This does not apply to any of existing code, but subsequent patches
will need that.
2016-08-09 18:24:45 +02:00
Peter Rajnoha
1fde4bf4d0 refactor: move report grouping and log reporting handles from processing_handle to cmd_context
With patches that will follow, this will make it possible to widen log
report coverage when commands are executed from lvm shell so the amount
of messages that may end up in stderr/stdout instead of log report are
minimized.
2016-08-09 18:24:45 +02:00
Peter Rajnoha
ef69934746 shell: also collect last command's return code for subsequent 'lastlog' invocation
Add new log_context=shell and with log_object_type=cmd and
log_object_name=<command_name> for command log report to collect
overall return code from last command (this is reported under
log_type=status).
2016-08-09 18:24:45 +02:00
Peter Rajnoha
06ce9b4e42 log: separate output and make it possible to use given FDs
Currently, the output is separated in 3 parts and each part can go into
a separate and user-defined file descriptor:

  - common output (stdout by default, customizable by LVM_OUT_FD environment variable)
  - error output (stderr by default, customizable by LVM_ERR_FD environment variable)
  - report output (stdout by default, customizable by LVM_REPORT_FD environment variable)

For example, each type of output goes to different output file:

  [0] fedora/~ # export LVM_REPORT_FD=3

  [0] fedora/~ # lvs fedora vg/abc 1>out 2>err 3>report

  [0] fedora/~ # cat out

  [0] fedora/~ # cat err
    Volume group "vg" not found
    Cannot process volume group vg

  [0] fedora/~ # cat report
    LV   VG     Attr       LSize   Layout     Role       CTime
    root fedora -wi-ao----  19.00g linear     public     Wed May 27 2015 08:09:21
    swap fedora -wi-ao---- 500.00m linear     public     Wed May 27 2015 08:09:21

Another example in LVM shell where the report goes to "report" file:

  [0] fedora/~ # export LVM_REPORT_FD=3
  [0] fedora/~ # lvm 3>report

  (in lvm shell)
  lvm> vgs

  (content of "report" file)
  [1] fedora/~ # cat report
    VG     #PV #LV #SN Attr   VSize  VFree
    fedora   1   2   0 wz--n- 19.49g    0

  (in lvm shell)
  lvm> lvs

  (content of "report" file)
  [1] fedora/~ # cat report
    VG     #PV #LV #SN Attr   VSize  VFree
    fedora   1   2   0 wz--n- 19.49g    0
    LV   VG     Attr       LSize   Layout     Role       CTime
    root fedora -wi-ao----  19.00g linear     public     Wed May 27 2015 08:09:21
    swap fedora -wi-ao---- 500.00m linear     public     Wed May 27 2015 08:09:21
2016-08-09 18:24:45 +02:00
Alasdair G Kergon
e5a5fd3669 lvconvert: Fix repair and replace routing. 2016-08-08 23:13:34 +01:00
Alasdair G Kergon
175e0905d5 test: Drop --mirrorlog when not a mirror. 2016-08-08 18:43:54 +01:00
David Teigland
fc93085c7a lvconvert: separate type raid to mirror
By the current division of unique operations,
converting type raid to type mirror is distinct
from converting type raid to raid.
2016-08-08 10:37:24 -05:00
Alasdair G Kergon
c55134aa48 lvconvert: Limit --corelog and --mirrorlog to mirrors.
It's an error to specify a log when the final result is not of type
mirror.
2016-08-08 14:39:55 +01:00
Heinz Mauelshagen
7d6cf12554 lvcreate: reject '--nosync' option for RAID6 LVs
The MD raid6 personality being used to drive lvm raid6 LVs does
read-modify-write updates to any stripes and thus relies on correct
P and Q Syndromes being written during initial synchronization or
it may fail reconstructing proper user data in case of SubLVs failing.

We may not allow the '--nosync' option on
creation of raid6 LVs for that reason.

Update/fix 'man lvcreate' in that regard.

add lvcreate-raid-nosync.sh test script.

- Resolves rhbz1358532
2016-08-08 13:52:35 +02:00
Peter Rajnoha
57fa5d4329 lvmcmdline: do not refresh whole cmd context if profile dropped after processing LVM cmd
We don't need to refresh whole cmd context if we drop profile after
processing LVM command - just like we don't refresh cmd context when
we're applying the profile. It's because profiles contain only safe
subset of settings which do not require complete cmd context refresh.

This patch calls process_profilable_config instead of
refresh_toolcontext if there was profile applied for the LVM
command only, not --config which requires toolcontext refresh.
The process_profilable_config just sets proper values based on
values of profilable settings, but it does not do complete
reinitialization of various parts (e.g. filters, logging etc.).
2016-08-08 11:57:13 +02:00
Alasdair G Kergon
76ef2d15d8 lvconvert: Support raid0<->raid4 and mirror<->raid1.
Only simple takeover cases so far.
2016-08-07 00:56:08 +01:00
Heinz Mauelshagen
d2c3b23e6d lvchange: Allow device specification when requesting a repair
'lvchange --resync LV' or 'lvchange --syncaction repair LV' request the
RAID layout specific parity blocks in raid4/5/6 to be recreated or the
mirrored blocks to be copied again from the master leg/copy for raid1/10,
thus not allowing a rebuild of a particular PV.

Introduce repeatable option '--[raid]rebuild PV' to allow to request
rebuilds of specific PVs in a RaidLV which are known to contain corrupt
data (e.g. rebuild a raid1 master leg).

Add test lvchange-rebuild-raid.sh to test/shell doing rebuild
variations on raid1/10 and 5; add aux function check_status_chars
to support the new test.

 - Resolves rhbz1064592
2016-08-05 16:01:46 +02:00
Alasdair G Kergon
91f866f786 raid: Tell lib whether stripesize was specified 2016-08-05 14:28:14 +01:00
David Teigland
d1a25fe597 lvconvert: add FIXME
operations are no longer identified correctly.
2016-08-04 13:01:48 -05:00
Alasdair G Kergon
4a15abe865 striped: Add precise macros for original segtype.
The existing striped macros include raid0 segments.
2016-08-04 01:24:39 +01:00
Alasdair G Kergon
5c3141a8b9 lvconvert: Improve error message when no -m. 2016-08-03 23:43:59 +01:00
Alasdair G Kergon
8b1a368b59 lvconvert: Provide entry point for new functionality.
Prepare for new segment type conversion functionality in cases that
currently fail.  In the short-term, we need to do this while limiting
the changes to the code paths for the conversions that are already
supported.
2016-08-03 03:53:29 +01:00
Alasdair G Kergon
fdc3fcbfce lvconvert: Pass region_size to lv_raid_convert. 2016-08-02 23:51:20 +01:00
Alasdair G Kergon
a234cebbed lvconvert: Preserve mirror region size with --repair. 2016-08-02 19:50:04 +01:00
Alasdair G Kergon
415c5fd5d8 lvconvert: Divide into 12 categories. 2016-08-02 16:44:21 +01:00
Alasdair G Kergon
6361bc4734 lvconvert: Treat --repair as an independent case. 2016-08-02 16:22:12 +01:00
Alasdair G Kergon
804a397643 lvconvert: Forbid stripe parameters with --repair. 2016-08-02 15:59:12 +01:00
Alasdair G Kergon
d0df1ff995 lvconvert: Set lp->segtype in only one place. 2016-07-30 18:20:04 +01:00
Alasdair G Kergon
1ce958bc5e lvconvert: Rely upon lp->thin and lp->cache. 2016-07-30 15:58:09 +01:00
Alasdair G Kergon
48d9c46daa lvconvert: Fix --type thin recognition.
lp->thin already holds the result of the cmdline arg resolution.
2016-07-30 15:08:50 +01:00
Alasdair G Kergon
b3fbcd1ff7 lvconvert: Move stripe validation code later.
Simpler to delay it all until the actual LV being changed is available,
rather than having it split in two parts.
2016-07-30 02:52:06 +01:00
Alasdair G Kergon
4ffe15bf6a tools: Unify stripesize parameter validation.
Move it all into get_stripe_params().
Some code paths missed --stripesize checks.
E.g. lvcreate --type raid4 -i1
2016-07-30 02:05:50 +01:00
Alasdair G Kergon
d01b1b6cc1 lvconvert: Rearrange code that decides segtype. 2016-07-30 00:22:13 +01:00
Alasdair G Kergon
a8e4790810 lvconvert: Only obtain --type parameter once. 2016-07-29 21:45:22 +01:00
Alasdair G Kergon
800c0d3dd6 lvconvert: Remove hard-coded segment names. 2016-07-29 21:11:12 +01:00
Alasdair G Kergon
6f47e79a88 pre-release 2016-07-28 18:36:45 +01:00
Heinz Mauelshagen
a579ba2ac2 vgsplit: ea90a3d622 added an unconditional call to lv_is_on_pvs()
on any thin snap external origin LV which caused a segfault
         when none existed as exposed by the vgsplit-thin.sh test.

         Only call lv_is_on_pvs() if an external origin LV actually
         exists and correct the related splitting logic.
2016-07-28 18:35:33 +02:00
David Teigland
ea90a3d622 vgsplit: restore check for thin pool external origin
Fix a regression from commit 4420d41f, in which the
check was skipped for splitting a thin pool and an
external origin.
2016-07-27 14:00:57 -05:00
Heinz Mauelshagen
c7b2654c25 lvcreate.c: respect DEFAULT_RAID_MAX_IMAGES on creation of any RaidLV 2016-07-27 18:20:48 +02:00
Heinz Mauelshagen
8f62b7bfe5 vg_validate: segment check enhancements for raids to catch bogus metadata
General RAID and RAID segment type specific checks are added
to merge.c. New static _check_raid_seg() is called on each segment
of a RaidLV (which have just one) from check_lv_segments().

New checks caught some unititialized segment members
which are addressed here as well:

- initialize seg->region_size to 0 in lvcreate.c for raid0/raid0_meta

- initialize list seg->origin_list in lv_manip.c
2016-07-27 18:17:29 +02:00
Zdenek Kabelac
eaf7d06a82 lvconvert: support --zero for full cache pool conversion.
Add matching support for -Z option also we doing full conversion
to cache-pool.

Extending coversion message to show which pool type is created
and whether the metadata will be wiped or remain unmodified.
2016-07-27 16:20:57 +02:00
Zdenek Kabelac
3c377f8334 lvconvert: tune cache-pool zeroing
Follow-up to 27a767d5e8.
Tunning behavior in a way we always prompt when option --zero is NOT specified.
Without -Z lvm expects user wants to 'reset' cache-pool metadata
(they could have been splitted from some cached LV)

If user doesn't want to zero metadata he needs to specify -Zn.

User may also avoid prompting for zeroing by using -Zy for
cache-pool (basically equals using --yes  without -Z being given)
(unlike full convert case, there is no cache-pool being converted,
so there is not 'uncoditional' prompt in this case).
2016-07-27 16:20:57 +02:00
Zdenek Kabelac
5636bfd83d lvconvert: suppress zeroing warning when converting to thin
When volume was lvconvert-ed to a thin-volume with external origin,
then in case thin-pool was in non-zeroing mode
it's been printing WARNING about not zeroing thin volume - but
this is wanted and expected - so nothing to warn about.

So in this particular use case WARNING needs to be suppressed.

Adding parameter support for lvcreate_params.

So now lvconvert creates 'normal thin LV' in read-only mode
(so any read will 'return 0' for a moment)
then deactivate regular thin LV and reacreate in 'final R/RW' mode
thin LV with external origin and activate again.
2016-07-27 16:20:57 +02:00
Alasdair G Kergon
d180bf6311 lvconvert: --trackchanges requires --splitmirrors 1 2016-07-25 21:15:25 +01:00
Alasdair G Kergon
1efb1c2343 lvconvert: --trackchanges requires --splitmirrors 2016-07-25 19:32:10 +01:00
David Teigland
7b1daa248f lvconvert: remove warnings about deprecated split option
A warning seems too severe for this message, so leave it
out until there's a better idea.
2016-07-25 11:01:56 -05:00
David Teigland
70bad99894 lvmlockd: improve message for lock-start
Only print this for shared VGs, and include the
time it may take for sanlock.
2016-07-25 10:43:06 -05:00
David Teigland
2c3b92b550 lvconvert: change error message
for implicit pool conversion since it's also used
when the lv is already a pool
2016-07-22 10:00:24 -05:00
Zdenek Kabelac
27a767d5e8 lvconvert: reusing old cache pool metadata needs -Zn
When cache pool is reused for a new cached volume, there is
normally no need to 'keep' old cache-pool metadata as this
could cause major data lose.

Unlike with 'lvcreate -H -LX --cachepool' conversion, this lvconvert
path left the metadata unzeroed - partly for making easier some
debugging, but this was rather a bug.

So to keep possible reattach of 'unzeroed' metadata, user
now has to use 'lvconvert -Zn' for such conversion. In this case
the prompt will appear about possibe data loss and to proceed,
user has to confirm such operation. Without -Zn metadata are wiped.
2016-07-22 14:40:26 +02:00
Heinz Mauelshagen
259f9dd718 lvcreate: conditionally set stripesize
Stripe size may not be set unconditionally in
_read_mirror_and_raid_params() or creation of
striped LV will fail
2016-07-21 02:33:28 +02:00
David Teigland
b203d5e745 lvconvert: allow implied cache pool convert
Just as with the implied thin pool convert when
given ambiguous command line options.
2016-07-20 10:44:28 -05:00
Heinz Mauelshagen
7eb7909193 lvcreate: raid0 needs default number of stripes
Commit 3928c96a37 introduced
new defaults for raid number of stripes, which may cause
backwards compatibility issues with customer scripts.

Adding configurable option 'raid_stripe_all_devices' defaulting
to '0' (i.e. off = new behaviour) to select the old behaviour
of using all PVs in the VG or those provided on the command line.

In case any scripts rely on the old behaviour, just set
'raid_strip_all_devices = 1'.

- resolves rhbz1354650
2016-07-20 17:20:15 +02:00
Zdenek Kabelac
6dc4d03508 lvconvert: enable work with partial LVs
Fix printed message and enable handling of missing PVs.
2016-07-19 17:39:41 +02:00
Bryn M. Reeves
da49d4d54e dmstats: fix bounds leak in _do_stats_create_regions() (Coverity) 2016-07-18 18:48:34 +01:00
Bryn M. Reeves
d2bf6742f8 dmstats: check uuid, major, and alldevices before argc (Coverity)
The --uuid, --major and --alldevices arguments were incorrectly tested
after confirming argc is > 0, in a branch that only executes if argc
== 0 (i.e. they were unreachable).

Move all device checks before the test for argc and log an appropriate
error before returning.
2016-07-18 18:48:34 +01:00
Bryn M. Reeves
da146ae9b9 dmstats: free bounds string in _stats_create_file() (Coverity) 2016-07-18 18:48:34 +01:00
Alasdair G Kergon
c425cdd115 Revert "lvcreate: raid0 needs default number of stripes"
This reverts commit 3928c96a37.

A new setting is required in lvm.conf to control this.
2016-07-15 21:53:37 +01:00
Alasdair G Kergon
5af311ddd8 macros: Add lv_is_not_synced. 2016-07-14 14:21:01 +01:00
Zdenek Kabelac
bbf574ab90 coverity: easier to follow set-up of vsn variable
Helping coverity to see 'vsn' really can't be NULL.
2016-07-13 21:52:14 +02:00
Heinz Mauelshagen
3928c96a37 lvcreate: raid0 needs default number of stripes
raid0/raid0_meta type LVs don't have a default number of stripes when
created without '-i/--stripes Stripes' whereas other raid types have one.

Patch sets the default for raid0/raid0_meta to 2 stripes.

The default amount of stripes for raid4/5/10 is changed to 2 and for raid6 to 3
rather than using all PVs in the VG or those provided on the command line.

This is to avoid unintended high number of stripes in case of many PVs.

To select a different amount of stripes from the default,
use 'lvcreate -i/--stripes Stripes'.

- resolves rhbz1354650
2016-07-13 21:45:49 +02:00
Heinz Mauelshagen
c77c59f3d9 lvchange: resync attempts on raid0 cause segfaults
Resync attempts on raid0/raid0_meta via 'lvchange --resync ...'
cause segfaults.

'lvchange --syncaction ...' doesn't get rejected either.

Prohibit both on raid0/raid0_meta LVs.

- resolves rhbz1354656
2016-07-12 17:23:05 +02:00
Heinz Mauelshagen
c32f96f277 vgsplit: use dm_list_next() 2016-07-12 16:25:12 +02:00
Heinz Mauelshagen
4ca55192e0 vgsplit: temporary list pointer may be invalid
4420d41fea introduced recursive split of lvs which
splits a top-level LV together with it's sub LVs.

This lead to invalid temporary list pointers
causing hangs/OOM situations.

Patch updates the temporary list pointer
referencing a moved sub LV.

- resolves rhbz1354686
2016-07-12 16:15:32 +02:00
Zdenek Kabelac
5254971418 cleanup: lvconvert display_lvname and indent updates
Use display_lvname() for printing vg/lv names.
Add some missing dots.
Some indents.
2016-07-12 13:20:20 +02:00
David Teigland
9f7e8f22dc lvconvert: remove some FIXME comments 2016-07-11 10:29:10 -05:00
Bryn M. Reeves
6a77a40501 dmstats: accept multiple arguments to --filemap
Make the --filemap switch take no arguments and instead accept one
or more files on the command line to be mapped and placed into
groups.

This allows --filemap to be used with a glob:

  # dmstats create --filemap *
  rhel5.10-1.qcow2: Created new group with 87 region(s) as group ID 1564.
  rhel5.10.qcow2: Created new group with 8 region(s) as group ID 1651.
  rhel7.0-1.qcow2: Created new group with 11 region(s) as group ID 1659.
  rhel7.0.qcow2: Created new group with 1454 region(s) as group ID 1670.
  vm.img: Created new group with 2 region(s) as group ID 3124.
2016-07-08 22:05:36 +01:00
David Teigland
3951ca9320 lvconvert: allow splitcache on hidden/used cache pool
lvconvert --splitcache VG/CachePool_corig

Allow the split via the hidden/used cache pool for the time being,
since the new lvconvert code did intend to allow it, but was just
missing the exception in the list of hidden LVs that were allowed.

The preferred method for splitcache is to run it on the visible
cache LV, not the hidden cache pool.  That may eventually become
the only method since we try to avoid running commands on
hidden LVs.
2016-07-08 14:34:36 -05:00
David Teigland
39921284a0 lvconvert: don't show aliases in error output
We want to consistently use the standard command form.
The aliases are now mentioned in the man page for reference.
2016-07-08 14:34:36 -05:00
Bryn M. Reeves
5cd39f1dc4 dmstats: use canonical path when reporting errors
When a 'dmstats create --filemap' operation fails (e.g. during
open(2), close(2), or dm_stats_create_regions_from_fd()), use the
canonical version of the path. This avoids cryptic/confusing error
messages when symbolic links exist in the path argument given:

  # findmnt /var/lib/libvirt/images -otarget,source
  TARGET                  SOURCE
  /var/lib/libvirt/images /dev/mapper/vg_hex-lv_images

  # readlink /var/lib/libvirt/images/my.img
  /boot/my.img

  # dmstats create --filemap /var/lib/libvirt/images/my.img
  Cannot map file: not a device-mapper device.
  Could not create regions from file /var/lib/libvirt/images/my.img
  Command failed

Using the canonical path the error is immediately obvious:

  # dmstats create --filemap /var/lib/libvirt/images/my.img
  Cannot map file: not a device-mapper device.
  Could not create regions from file /boot/my.img
  Command failed
2016-07-08 17:27:52 +01:00
Bryn M. Reeves
bd1f4987eb dmstats: group regions by default with --segments
Grouping is also useful in combination with --segments: creating a
group allows both individual segment data and data for the device
as a whole to be presented in the same report.

Support grouping for 'create --segments' in the same manner as for
'create --filemap'; group regions by default, applying an optional
alias specified with --alias, unless the user specifies --nogroup.
2016-07-08 17:27:52 +01:00
Bryn M. Reeves
bce1bc4ca3 dmstats: allow --bounds with 'create --filemap' 2016-07-08 17:27:52 +01:00
Bryn M. Reeves
7ebe630b69 dmstats: add create --filemap
Add a new option to the create command to create regions that map the
extents of a file:

  # dmstats create --filemap /path/to/file
  /path/to/file: Created new group with 10 region(s) as group ID 0.

When performing a --filemap no device argument is required (and
supplying one results in error) since the device to bind to is implied
by the file path and is obtained directly from an fstat().

Grouping may be optionally disabled by the --nogroup switch: in this
case the command will report each region individually:

  # dmstats create --nogroup --filemap /path/to/file
  /path/to/file: Created new region with 1 area as region ID 0.
  /path/to/file: Created new region with 1 area as region ID 1.
  /path/to/file: Created new region with 1 area as region ID 2.

When grouping regions the group alias is automatically set to the
basename (as returned by dm_basename()) of the provided file.

This can be overridden to a user-defined value at the command line by
use of the --alias option.

If grouping is disabled no alias can be set.

Use of offset and subdivision options (--start, --length, --segments,
--areas, --areasize).

Setting aux_data and histograms for groups is possible but is not
currently implemented.
2016-07-08 14:34:41 +01:00
Bryn M. Reeves
005adb0a0a dmstats: ensure dm_stats_delete_region() return is checked 2016-07-08 12:26:34 +01:00
David Teigland
13cd3ff5a0 lvconvert: allow converting type raid1 to type linear
The code could perform this conversion but ironically
did not recognize the standard command form, only the
the unpreferred "implication-based" command form.

"lvconvert --type linear VG/RaidLV" would fail, but
"lvconvert --mirrors 0 VG/RaidLV" would succeed.
2016-07-06 16:44:18 -05:00
David Teigland
37d1b7b745 lvconvert: allow converting type mirror to type linear
The code could perform this conversion but ironically
did not recognize the standard command form, only the
the unpreferred "implication-based" command form.

"lvconvert --type linear VG/MirrorLV" would fail, but
"lvconvert --mirrors 0 VG/MirrorLV" would succeed.
2016-07-06 16:33:25 -05:00
David Teigland
4d1c4e1f73 vgcreate: allow pvcreate force option
Commit a9940bd3c9 began disallowing the -f (force) option
to apply to the implicit pvcreate.  Make it allowed again.
2016-07-06 14:10:53 -05:00
Bryn M. Reeves
1faa208067 dmstats: simplify nr_areas calculation (CWE-561)
Eliminate dead conditional (step cannot be zero).

Fixes commit 988ca74.
2016-07-06 09:59:45 +01:00
Bryn M. Reeves
21b946dfb7 dmstats: fix 'obj_type' field width
The header for 'obj_type' was changed from 'Object Type' to
'ObjType': update the minimum field width to match this change.
2016-07-06 09:37:59 +01:00
Alasdair G Kergon
dfcdfa057b vgsplit: Don't skip moving internal snapshot LV.
Also place snapshot LV handling back at the end, after all possible
origin and cow LVs got dealt with.
2016-07-05 23:08:14 +01:00
Bryn M. Reeves
e9c6fd3cff dmstats: fix <backtrace> in _display_info_cols()
Remove a false <backtrace> in _display_info_cols(): it is not an
error if there are no regions to display.

Fixes commit e6724f03.
2016-07-05 19:53:17 +01:00
Bryn M. Reeves
cf0fa3d693 dmstats: rename --auxdata to --userdata 2016-07-05 19:53:17 +01:00
Bryn M. Reeves
14b74c360f dmstats: rename 'aux_data' to 'user_data'
Make it clear that the "aux data" presented in reports is the user
data stored in the field (and does not include any library-internal
state such as group descriptors) by renaming the field to user_data
and changing the heading to "UserData".
2016-07-05 19:53:17 +01:00
Bryn M. Reeves
2b0dd0b051 dmstats: replace --statstype with separate object switches
Replace --statstype=area,region,group with a separate switch for
each object type: --area, --region, --group. Omitting any object
type switch will use the defaults for the current command (regions
and groups for list, and regions, groups and areas for verbose list).
2016-07-05 19:53:17 +01:00
Bryn M. Reeves
b926511b4b dmstats: add 'statsname' and 'obj_type' to default stats fields 2016-07-05 19:53:17 +01:00
Bryn M. Reeves
0b05e4a874 dmstats: rename 'type' field to 'obj_type'
Rename the field and remove whitespace from the column heading:

  "Object Type" -> "ObjType"
2016-07-05 19:53:17 +01:00
Bryn M. Reeves
c014425b6f dmstats: use 'statsname' and 'groupid' in default fields
Replace the 'name' field with 'statsname' in order to report alias
names for groups, and include the 'group_id' field between statsname
and the 'region_id' field to make it clear to the user when groups
are in use.
2016-07-05 19:53:17 +01:00
Bryn M. Reeves
b0964acadf dmstats: convert 'delete' to dm_stats_foreach_region() 2016-07-05 19:53:16 +01:00
Bryn M. Reeves
01cc11d9f8 dmstats: convert 'print' to dm_stats_foreach_region() 2016-07-05 19:53:16 +01:00
Bryn M. Reeves
2047b8e565 dmstats: convert 'clear' to dm_stats_foreach_region() 2016-07-05 19:53:16 +01:00
Bryn M. Reeves
cf6c1665f1 dmstats: fix region deletion message
Make the use of 64-bit format macros consistent with other usage
and end the message with a '.'.
2016-07-05 19:53:16 +01:00
Bryn M. Reeves
e554e375ae dmstats: accept --groupid for 'dmstats delete'
Allow deletion of a group and all the regions it contains with a
single 'dmstats delete' command.
2016-07-05 19:53:16 +01:00
Bryn M. Reeves
837e7e513b dmstats: allow --statstype to override report defults 2016-07-05 19:53:16 +01:00
Bryn M. Reeves
a2bf3c6ee8 dmstats: report a list of members as a group's region_id
Instead of '-' print the member list in range notation (as stored
in aux_data).
2016-07-05 19:53:16 +01:00
Bryn M. Reeves
ca0a4cecec dmstats: report groups and region summaries
Walk avaiable groups and regions (in addition to areas) and report
aggregate statistics and properties.

A new switch is added to filter the type of obects inclued in the
report:

  --statstype={all,area,region,group}

The type of the current row is also available in a new
DR_STATS_META field 'type'.
2016-07-05 19:53:16 +01:00
Bryn M. Reeves
8b179e09a4 dmstats: do not walk regions if deleting a single id 2016-07-05 19:53:16 +01:00
Bryn M. Reeves
402d840aa7 dmstats: add stats_name field
To allow the names used to describe statistics report objects to
change (for e.g to support groups and region and group aliases)
introduce a new "stats_name" field that evaluates to the correct
name for the object being reported.
2016-07-05 19:53:16 +01:00
Bryn M. Reeves
b55daa28e8 dmstats: add group alias support 2016-07-05 19:53:16 +01:00
Bryn M. Reeves
0761863e28 dmstats: add 'group' and 'ungroup' commands
Add a pair of commands to create and delete stats groups:

  dmstats group --regions REGIONS

  dmstats ungroup --groupid ID

REGIONS specifies a list of regions to be included in the group.
Regions are specified as a comma separated list in order of
increasing region ID. Ranges may be specified as a hypen separated
pair of values giving the first and last member of the range.
2016-07-05 19:53:16 +01:00
Bryn M. Reeves
b4cbc8f283 dmstats: add group_id report field type 2016-07-05 19:53:16 +01:00
Heinz Mauelshagen
4420d41fea vgsplit: fix moving RAID LVs to split off VG and check for LVs not to skip moving with other LV types 2016-07-05 19:49:44 +01:00
Bryn M. Reeves
52be93c54b dmsetup: fix timestamp leak
With a single report (--count=1) no timerfd is set up and the cycle
and current timestamps should be freed during the single call to
_update_interval_times().
2016-07-04 12:16:51 +01:00
Bryn M. Reeves
62dce13c7a dmstats: fix RgStart and RgSize field widths 2016-07-04 12:16:51 +01:00
Alasdair G Kergon
d8c2677ab9 raid0: Add raid0_meta segment type. 2016-07-01 22:20:54 +01:00
David Teigland
1df9822224 lvconvert: improve arg checks in new operation routing code
Use defines for segment types, and test args directly
instead of indirectly.
2016-07-01 11:24:41 -05:00
Zdenek Kabelac
3fd4584886 cleanup: lvchange uses display_lvname
Convert messages to report vg/lv name consistently.

Also drop unneeded 'info_obtaned' variable since the
obtained info is not reused in any code path.
2016-07-01 00:44:48 +02:00
David Teigland
103c188681 lvconvert: add comments describing conversions 2016-06-30 17:08:50 -05:00
Alasdair G Kergon
aed8bc8ae7 macros: Use is_power_of_2. 2016-06-30 17:59:44 +01:00
David Teigland
a8e39530ef lvconvert: add missing alias for a thin-pool conversion
The case of converting a cache volume to a thin pool missed
recognizing the --thinpool alias for --type thin-pool.
2016-06-30 10:09:54 -05:00
David Teigland
802ed9d459 lvconvert: remove unused code
This code became unused with the previous commit 2282f5.
2016-06-29 16:59:32 -05:00
David Teigland
2282f53ac7 lvconvert: rework routing of operations
Add new logic to identify each unique operation and route
it to the correct function to perform it.  The functions
that perform the conversions remain unchanged.

This new code checks every allowed combination of LV type
and requested operation, and for each valid combination
calls the function that performs that conversion.

The first stage of option validation which checks for
incompatible combinations of command line options, is done
done before process_each is called.  This is unchanged.
(This new code will allow that first stage validation to
be simplified in a future commit.)

The second stage of checking options against the specific
LV type is done by this new code.  For each valid combination
of operation + LV type, the new code calls an existing
function that implements it.

With this in place, the ad hoc checks for valid combinations
of LV types and operations can be removed from the existing
code in a future commit.

(The #if 0 is used to keep the patch clean, and the
disabled code will be removed by a following patch.)
2016-06-29 16:55:27 -05:00
Alasdair G Kergon
79446ffad7 raid: Infrastructure for raid takeover. 2016-06-28 02:42:30 +01:00
David Teigland
a7c45ddc59 lvmetad: two phase vg_update
Previously, a command sent lvmetad new VG metadata in vg_commit().
In vg_commit(), devices are suspended, so any memory allocation
done by the command while sending to lvmetad, or by lvmetad while
updating its cache could deadlock if memory reclaim was triggered.

Now lvmetad is updated in unlock_vg(), after devices are resumed.
The new method for updating VG metadata in lvmetad is in two phases:

1. In vg_write(), before devices are suspended, the command sends
   lvmetad a short message ("set_vg_info") telling it what the new
   VG seqno will be.  lvmetad sees that the seqno is newer than
   the seqno of its cached VG, so it sets the INVALID flag for the
   cached VG.  If sending the message to lvmetad fails, the command
   fails before the metadata is committed and the change is not made.
   If sending the message succeeds, vg_commit() is called.

2. In unlock_vg(), after devices are resumed, the command sends
   lvmetad the standard vg_update message with the new metadata.
   lvmetad sees that the seqno in the new metadata matches the
   seqno it saved from set_vg_info, and knows it has the latest
   copy, so it clears the INVALID flag for the cached VG.

If a command fails between 1 and 2 (after committing the VG on disk,
but before sending lvmetad the new metadata), the cached VG retains
the INVALID flag in lvmetad.  A subsequent command will read the
cached VG from lvmetad, see the INVALID flag, ignore the cached
copy, read the VG from disk instead, update the lvmetad copy
with the latest copy from disk, (this clears the INVALID flag
in lvmetad), and use the correct VG metadata for the command.

(This INVALID mechanism already existed for use by lvmlockd.)
2016-06-28 02:30:31 +01:00
Peter Rajnoha
1b11f09d2a reporter: simplify --configreport handling for -S|--select and fix an issue reported by coverity
Simplify code around _do_get_report_selection - remove "expected_idxs[]"
argument which is superfluous and add "allow_single" switch instead to
allow for recognition of "--configreport <report_name> -S" as well as
single "-S" if needed.

Null pointer dereferences  (FORWARD_NULL) /safe/guest2/covscan/LVM2.2.02.158/tools/reporter.c: 961 in _do_report_get_selection()
Null pointer dereferences  (FORWARD_NULL) Dereferencing null pointer "single_args".
2016-06-28 02:27:19 +01:00
Peter Rajnoha
f0768f636e coverity: fix issues detected in recent code
Uninitialized variables  (UNINIT) /safe/guest2/covscan/LVM2.2.02.158/tools/toollib.c: 3520 in _process_pvs_in_vgs()
Uninitialized variables  (UNINIT) Using uninitialized value "do_report_ret_code".

Null pointer dereferences  (REVERSE_INULL) /safe/guest2/covscan/LVM2.2.02.158/libdm/libdm-report.c: 4745 in dm_report_output()
Null pointer dereferences  (REVERSE_INULL) Null-checking "rh" suggests that it may be null, but it has already been dereferenced on all paths leading to the check.

Incorrect expression  (MISSING_COMMA) /safe/guest2/covscan/LVM2.2.02.158/lib/log/log.c: 280 in _get_log_level_name()
Incorrect expression  (MISSING_COMMA) In the initialization of "log_level_names", a suspicious concatenated string ""noticeinfo"" is produced.

Null pointer dereferences  (FORWARD_NULL) /safe/guest2/covscan/LVM2.2.02.158/tools/reporter.c: 816 in_get_report_options()
Null pointer dereferences  (FORWARD_NULL) Comparing "mem" to null implies that "mem" might be null.
2016-06-28 02:26:54 +01:00
Peter Rajnoha
9a414245b9 commands: help: add missing --reportformat references 2016-06-24 14:49:13 +02:00
Peter Rajnoha
14da3cc793 commands: fix typo in arg assignment 2016-06-24 11:10:10 +02:00
Zdenek Kabelac
1c212371fa cleanup: type cleanup
Fix return code 1.
Since we always check for !() - this fix has no other effect.
2016-06-24 00:39:14 +02:00
Zdenek Kabelac
7c921f18e2 lvresize: let pass even protected names like _tmeta
Only later validation can decide if the volume is actually restricted
from being resized  (unlike in lvcreate time).
2016-06-24 00:39:14 +02:00
Zdenek Kabelac
1bb7a155d1 lvresize: fixes for recent commit
Merging process and patch rework missed some bits - fix them.
2016-06-24 00:39:14 +02:00
Zdenek Kabelac
5a919e4805 cleanup: remove unused sizearg variable
It's not used for anything now.
2016-06-23 14:59:29 +02:00
Zdenek Kabelac
d44e653fe1 lvresize: do not pass struct cmd
Use common API design and pass just LV pointer to lv_manip.c functions.
Read cmd struct via    lv->vg->cmd when needed.
Also do not try to return EINVALID_CMD_LINE error when we
have already openned VG - this error code can only be returned before
locking VG.
2016-06-23 14:57:09 +02:00
Zdenek Kabelac
f45b689406 lvresize: update lvresize_params struct
Reorganise  struct lvresize_params to better fit lvresize needs to be
able to resize more then just a single LV.
2016-06-23 14:57:09 +02:00
Zdenek Kabelac
6268d0a080 cleanup: add dots to some messages
Add missing dots and one comment.
2016-06-23 14:57:08 +02:00
Zdenek Kabelac
0a525832f9 cleanup: code lines reodered 2016-06-23 14:57:08 +02:00
Zdenek Kabelac
d578d8d3a1 lvresize: inform about ignored args with --use-polices
When --use-polices is specified, all size args are meaningless,
as the resize is based upon policy. So just keep user informed.
2016-06-23 14:57:08 +02:00
Alasdair G Kergon
6513a7a449 lvconvert: Fix --stripes handling.
Only treat --stripes as meaning --type striped if no other type was
first detected.  If a segtype got selected, don't override it later.
2016-06-22 22:10:42 +01:00
David Teigland
ebd2758dab vgimportclone: add native command
This is cleaner and more efficient than the script.
The args and usage are unchanged.
2016-06-22 13:13:10 -05:00
Alasdair G Kergon
dfc516f9bf lvconvert: Refactor argument handling code.
Begin disentangling the different lvconvert modes of operation
from each other.
2016-06-22 18:40:22 +01:00
Alasdair G Kergon
7e671e5dd0 tools: Use arg_is_set instead of arg_count. 2016-06-21 22:24:52 +01:00
David Teigland
6c269e639a vgcfgrestore: rescan to reenable lvmetad on error path
In commit 6ae22125, vgcfgrestore began disabling lvmetad
while running, and rescanned to enable it again at the end,
but missed the rescanning/enabling in the error case.
2016-06-21 11:40:42 -05:00
David Teigland
6ae22125c6 vgcfgrestore: use lvmetad disabled state
Previously, vgcfgrestore would attempt to vg_remove the
existing VG from lvmetad and then vg_update to add the
restored VG.  But, if there was a failure in the command
or with vg_update, the lvmetad cache would be left incorrect.
Now, disable lvmetad before the restore begins, and then
rescan to populate lvmetad from disk after restore has
written the new VG to disk.
2016-06-20 11:19:49 -05:00
David Teigland
cae6591b9d vgscan: fix process_each args
zero/null args were mixed up.
2016-06-20 11:18:36 -05:00
Peter Rajnoha
a77732c180 log: add 'label' log report object type; annotate process_each_label with log_set_report_object_{type, id_and_name} and report_log_ret_code 2016-06-20 14:05:13 +02:00
Peter Rajnoha
db6b4c1eef report: compare --configreport value with basic report type
Reporting commands can be of different types (even if the command name
is the same):
  - pvs command can be either of PVS, PVSEGS or LABEL report type,
  - vgs command is of VGS report type,
  - lvs command is of LVS or SEGS report type.

Use basic report type when looking for report prefix used for
--configreport option.

This means that:
  - 'pvs --configreport pv' applies to PVS, PVSEGS or LABEL report type
  - 'vgs --configreport vg' applies to VGS report type
  - 'lvs --configreport lv' applies to LVS and SEGS report type
2016-06-20 14:04:37 +02:00
Peter Rajnoha
2593cab5c4 commands: add --configreport arg for all relevant commands 2016-06-20 11:57:24 +02:00
Peter Rajnoha
92caebab95 report: add --logonly arg to report only log for a command 2016-06-20 11:33:43 +02:00
Peter Rajnoha
3e8e8ddb46 report: use report type description for report's name if using DM_REPORT_GROUP_BASIC output format 2016-06-20 11:33:43 +02:00
Peter Rajnoha
1127b090bd conf: add log/command_log_selection config setting 2016-06-20 11:33:43 +02:00
Peter Rajnoha
cee1aedf12 log: use separate 'orphan' report object type for orphan VGs 2016-06-20 11:33:43 +02:00
Peter Rajnoha
89e2aef63a tools: add 'lvm lastlog' command for interactive query and display of last command's log
If we're running in lvm shell, we can keep last command's log report
for further query with possible different selection criteria for easy
log lookup.
2016-06-20 11:33:43 +02:00
Peter Rajnoha
c33c0545af refactor: move 'interactive' field from struct command_line to struct cmd_context as 'is_interactive' switch 2016-06-20 11:33:43 +02:00
Peter Rajnoha
0ab1187740 log: annotate processing code with report_current_object_cmdlog 2016-06-20 11:33:43 +02:00
Peter Rajnoha
6ca28ca4c6 log: annotate processing code with log_set_report_{context,object_type,id_and_name} 2016-06-20 11:33:43 +02:00
Peter Rajnoha
1b107adc1d report: add 'multiple_output' arg to report_init
Some reports may be reported several times with possible different
selection criteria, just like command log report.
2016-06-20 11:33:43 +02:00
Peter Rajnoha
7d4a15e53a log: log warnings and errors via report if set; add log_set_report* fns
This patch adds structures and functions to reroute error and warning
logs to log report, if it's set.

There are 5 new functions:
  - log_set_report
    Set log report where logging will be rerouted.

  - log_set_report_context
    Set context globally so any report_cmdlog call will use it.

  - log_set_report_object_type
    Set object type globally so any report_cmdlog call will use it.

  - log_set_report_object_name_and_id
    Set object ID and name globally so any report_cmdlog call will use it.

  - log_set_report_object_group_and_group_id
    Set object group ID and name globally so any report_cmdlog call will use it.

These functions will be called during LVM command processing so any logs
which are rerouted to log report contain proper information about current
processing state.
2016-06-20 11:33:42 +02:00
Peter Rajnoha
8cfc385491 toollib: make it possible to also process internal VGs, add 'include_internal' switch to process_each_vg fn
The lvm fullreport works per VG and as such, the vg, lv, pv, seg and
pvseg subreport is done for each VG. However, if the PV is not part of
any VG yet, we still want to display pv and pvseg subreports for these
"orphan" PVs - so enable this for lvm fullreport's process_each_vg call.
2016-06-20 11:33:42 +02:00
Peter Rajnoha
31aaa3be71 report: check report type and options used for full report's subreports
If we have fullreport, make sure that the options/sort keys used for
each report doesn't change its type - we want to preserve the original
type so it's always 5 different subreports within fullreport (vg, lv, pv,
seg, pvseg). Since we have all report types within fullreport, users
should add fields under proper subreport type - this minimizes
duplication of info displayed on output.
2016-06-20 11:33:42 +02:00
Peter Rajnoha
b864a06221 report: recognize selection (-S|--select) for each subreport; make -S|--select groupable 2016-06-20 11:33:42 +02:00
Peter Rajnoha
e081203f3e report: recognize list of keys to sort report by (-O|--sort) for each subreport; make -O|--sort groupable 2016-06-20 11:33:42 +02:00
Peter Rajnoha
bd26684d5d report: recognize list of fields to report (-o|--options) for each subreport 2016-06-20 11:33:42 +02:00
Peter Rajnoha
80ffaefb88 report: add _get_report_idx_from_name and _should_process_report_idx helper fns
Prepare for recognition of cmd line options for each subreport within
one command.
2016-06-20 11:33:42 +02:00
Peter Rajnoha
28b4c48e2a args: add --configreport arg 2016-06-20 11:33:42 +02:00
Peter Rajnoha
d23c5b9318 args: add priorities for grouping args
Groupable args (the ones marked with ARG_GROUPABLE flag) start a new
group of args if:
  - this is the first time we hit such a groupable arg,
  - or if non-countable arg is repeated.

However, there may be cases where we want to give priorities when
forming groups and hence force new group creation if we hit an arg
with higher grouping priority.

For example, let's assume (for now) hypothetical sequence of args used:

  lvs -o lv_name --configreport log -o log_type --configreport lv -o +vg_name

Without giving any priorites, we end up with:

  lvs -o lv_name --configreport log -o log_type --configreport lv -o +vg_name
     |                            | |                           | |          |
     \__________GROUP1___________/   \________GROUP2___________/   \_GROUP3_/

This is because we hit "-o" as the first groupable arg. The --configreport,
even though it's groupable too, it falls into the previous "-o" group.

While we may need to give priority to the --configreport arg that should
always start a new group in this scenario instead:

  lvs -o lv_name --configreport log -o log_type --configreport lv -o +vg_name
      |         | |                            | |                           |
      \_GROUP1_/   \_________GROUP2___________/   \_________GROUP3__________/

So here "-o" started a new group but since "--configreport" has higher
priority than "-o", it starts fresh new group now and hence the rest of
the command line's args are grouped by --configreport now.
2016-06-20 11:33:42 +02:00
Peter Rajnoha
9c37b7ed7c conf: add report/{vgs,pvs,lvs,pvsegs,segs}_{cols,sort}_full config settings 2016-06-20 11:33:42 +02:00
Peter Rajnoha
26c43c6ce5 commands: report: add lvm fullreport command
lvm fullreport executes 5 subreports (vg, pv, lv, pvseg, seg) per each VG
(and so taking one VG lock each time) within one command which makes it
easier to produce full report about LVM entities.

Since all 5 subreports for a VG are done under a VG lock, the output is
more consistent mainly in cases where LVM entities may be changed in
parallel.
2016-06-20 11:33:42 +02:00
Peter Rajnoha
f1e7f35bb5 commands: recognize --reportformat option for other commands
Enables --reportformat option for all command using processing_handle
(and process_each_* fn variant), that is: lvchange, lvcreate, lvdisplay,
lvextend, lvreduce, lvremove, lvrename, lvresize, lvscan, pvchange,
pvresize, pvcreate, pvdisplay, pvmove, pvremove, pvscan, vgcfgbackup,
vgchange, vgck, vgconvert, vgcreate, vgdisplay, vgexport, vgextend,
vgimport, vgmknodes, vgreduce, vgremove, vgrename command.
2016-06-20 11:33:42 +02:00
Peter Rajnoha
f8a93763e5 commands: recognize --reportformat option for pvs,vgs,lvs and devtypes command
Enables --reportformat options for pvs, vgs, lvs, devtypes command.
2016-06-20 11:33:41 +02:00
Peter Rajnoha
10a1b9e182 report: add current report to existing group
Add any report (pvs/vgs/lvs) currently processed to current report group
which is part of processing handle and which already contains log
report. This way both log report and pvs/vgs/lvs report will be
reported as a whole within a group, thus having same output format as
selected by --reportformat option.
2016-06-20 11:33:41 +02:00
Peter Rajnoha
f752a95302 toollib: add 'parent' field to processing_handle; init report format only if there's no parent
If there's parent processing handle, we don't need to create completely
new report group and status report - we'll just reuse the one already
initialized for the parent.

Currently, the situation where this matter is when doing internal report
to do the selection for processing commands where we have parent processing
handle for the command itself and processing handle for the selection
part (that is selection for non-reporting tools).
2016-06-20 11:33:41 +02:00
Peter Rajnoha
c099f531fb toollib: add report_group and log_rh to processing_handle and initialize cmd processing log report
Wire up report group creation with log report in struct
processing_handle and call report_format_init during processing handle
initialization (init_processing_handle fn) and destroy it while
destroing processing handle (destroy_processing_handle fn).

This way, all the LVM command processing using processing handle
has access to log report via which the current command log
can be reported as items are processed.
2016-06-20 11:33:41 +02:00
Peter Rajnoha
213434d426 report: separate common report and per-report args
Separating common report and per-report arguments prepares the code for
handling several reports per one command (for example, the command log
report and LVM command report itself).

Each report can have sort keys, options (fields), list of fields to
compact and selection criteria set individually. Hooks for setting these
per report within one command will be a part of subsequent patches, this
patch only separates new struct single_report_args out of existing
struct report_args.
2016-06-20 11:33:41 +02:00
Peter Rajnoha
bd0a0ae36b conf: add log/report_command_log config setting 2016-06-20 11:33:41 +02:00
Peter Rajnoha
a08e02afbf conf: add report/output_format config setting
New report/output_format configuration sets the output format used
for all LVM commands globally. Currently, there are 2 formats
recognized:
   - basic (the classical basic output with columns and rows, used by default)
   - json (output is in json format)
2016-06-20 11:33:41 +02:00
Peter Rajnoha
79a74e9aae toollib: add report_format_init fn to create report group and to create/add log report handle
Add new --reportformat option and new report_format_init function that
checks this option and creates new report group accordingly, also
preparing log report handle and adding it to the report group just
created.
2016-06-20 11:33:41 +02:00
Peter Rajnoha
c36d4632a6 conf: add log/command_log_{sort,cols} config settings 2016-06-20 11:33:40 +02:00
Peter Rajnoha
99c2a2b960 report: add CMDLOG report type
This is a preparation for new CMDLOG report type which is going to be
used for reporting LVM command log.

The new report type introduces several new fields (log_seq_num, log_type,
log_context, log_object_type, log_object_group, log_object_id, object_name,
log_message, log_errno, log_ret_code) as well as new configuration settings
to set this report type (report/command_log_sort and report/command_log_cols
lvm.conf settings).

This patch also introduces internal report_cmdlog helper function
which is a wrapper over dm_report_object to report command log via
CMDLOG report type and which is going to be used throughout the code
to report the log items.
2016-06-20 11:33:08 +02:00
David Teigland
029f51e1a8 vgreduce: fix location of lvmlockd global lock
The lvmlockd global lock was missing the non-repair case,
which caused the new orphan PV created by vgreduce to
not be seen by other hosts.
2016-06-17 12:22:58 -05:00
Peter Rajnoha
a23655ab3b tools: add missing destroy_processing_handle in pvscan and vgreduce code 2016-06-17 13:29:33 +02:00
David Teigland
f77fe436af pvscan: don't activate LVs when use_lvmetad=0
commit 15da467b was meant to address the case where
use_lvmetad=1 in lvm.conf, and lvmetad is not available,
in which case, pvscan --cache -aay should activate LVs.

But the commit unintentionally also changed the case
where use_lvmetad=0 in lvm.conf, in which case
pvscan --cache -aay should not activate LVs, so fix
that here.
2016-06-16 12:04:05 -05:00
David Teigland
944ae4d2df pvscan: fix lvmlockd global lock
This should have been removed when pvscan was
recently converted to use process_each_pv which
does the lvmlockd locking.
2016-06-15 16:51:36 -05:00
David Teigland
15da467b52 pvscan: do activation when lvmetad is not running
When pvscan --cache -aay fails to connect to lvmetad it will
simply exit and do nothing.  Change this so that it will
skip the lvmetad cache step and do the activation step from
disk.
2016-06-15 14:19:18 -05:00
David Teigland
ae0a8740c5 lvmlockd: fix rescanning VG
Previously, new PVs that were added to the VG were not scanned.
2016-06-15 11:36:30 -05:00
David Teigland
86f9271457 vgcreate, pvcreate, vgextend: don't use a device with duplicates
If duplicate orphan PVs exist, don't allow one of them to be
used for vgcreate/pvcreate/vgextend.
2016-06-07 15:21:07 -05:00
David Teigland
01156de6f7 lvmcache: add optional dev arg to lvmcache_info_from_pvid
A number of places are working on a specific dev when they
call lvmcache_info_from_pvid() to look up an info struct
based on a pvid.  In those cases, pass the dev being used
to lvmcache_info_from_pvid().  When a dev is specified,
lvmcache_info_from_pvid() will verify that the cached
info it's using matches the dev being processed before
returning the info.  Calling code will not mistakenly
get info for the wrong dev when duplicate devs exist.

This confusion was happening when scanning labels when
duplicate devs existed.  label_read for the first dev
would add an info struct to lvmcache for that dev/pvid.
label_read for the second dev would see the pvid in
lvmcache from first dev, and mistakenly conclude that
the label_read from the second dev can be skipped
because it's already been done.  By verifying that the
dev for the cached pvid matches the dev being read,
this mismatch is avoided and the label is actually read
from the second duplicate.
2016-06-07 15:15:47 -05:00
David Teigland
b321d2b1b9 pvmove: disallow tag args
pvmove began processing tags unintentionally from commit,
6d7dc87cb pvmove: use toollib

pvmove works on a single PV, but tags can match multiple PVs.
If we allowed tags, but processed only the first matching PV,
then the resulting PV would be unpredictable.

Also, the current processing code does not allow us to simply
report an error and do nothing if more than one PV matches the tag,
because the command starts processing PVs as they are found,
so it's too late to do nothing if a second PV matches.
2016-06-03 09:56:48 -05:00
Peter Rajnoha
687bc5cecf lvmconfig: fix lvmconfig --type diff to display complete diff if config cascade used
If configuration consists of several sources in config cascade
("config cascade" defined in man lvmconfig(8)), lvmconfig displayed
only difference from defaults of the topmost config in the cascade.
Fix lvmconfig to display complete difference, considering all
the configuration in the cascade.

For example, before this patch:

	(use_lvmetad=0 set in lvm.conf which differs from defaults)
	$ lvmconfig --type diff
	global {
		use_lvmetad=0
	}

	(compact_output=1 set on cmd line)
	$ lvmconfig --type diff --config report/compact_output=1
	report {
		compact_output=1
	}

	(headings=0 set in profile)
	$ lvmconfig --type diff --commandprofile test
	report {
		headings=0
	}

	(difference in topmost configuration source is displayed)
	$ lvmconfig --type diff --commandprofile test --config report/compact_output=1
	report {
		compact_output=1
	}

With this patch applied (the config cascade is merged before looking for
difference from defaults in configuration):

	$ lvmconfig --type diff
	global {
		use_lvmetad=0
	}

	$ lvmconfig --type diff --config report/compact_output=1
	report {
		compact_output=1
	}
	global {
		use_lvmetad=0
	}

	$ lvmconfig --type diff --profile test
	report {
		headings=0
	}
	global {
		use_lvmetad=0
	}

	$ lvmconfig --type diff --profile test --config report/compact_output=1
	report {
		headings=0
		compact_output=1
	}
	global {
		use_lvmetad=0
	}
2016-06-02 13:49:38 +02:00
Peter Rajnoha
48877e215d coverity: missing check for id_write_format return value 2016-05-31 09:56:10 +02:00
Peter Rajnoha
4fb224a553 toollib: properly reset selection handle on selection failure in select_match_{pv,vg,lv} 2016-05-31 09:08:59 +02:00
Peter Rajnoha
815f1ee26d toollib: simplify internal selection calls for non-reporting tools
Some of the variables were set superfluously - we can just use existing
"struct processing_handle" which includes "struct selection_handle".
2016-05-30 16:44:18 +02:00
Zdenek Kabelac
04003cf1ff cache: add log_error on error path
Validate and report error when lv_cache_status is called
for inactive LV, or pending delete or unused cache_pool.
2016-05-27 15:47:24 +02:00
Zdenek Kabelac
98b41db324 cleanup: drop cmd and constify lv for lv_refresh_suspend_resume()
Like with most other lv_manip* functions take just LV arg and get cmd
from embeded pointer when needed.
2016-05-27 15:47:24 +02:00
Zdenek Kabelac
cb49ceeaba cleanup: substract integers
Instead of doing float arithmetic, do integer math first and
convert result to float.
2016-05-27 15:47:24 +02:00
David Teigland
5dc2ed0c71 vgreduce: use process_each_vg 2016-05-25 16:41:59 -05:00
David Teigland
2f2b3c9100 lvconvert: use process_each_lv
In the same way that process_each_vg() can be passed
a single VG name to process, also allow process_each_lv()
to be passed a single VG name and LV name to process.
2016-05-25 15:05:49 -05:00
Peter Rajnoha
adeb624c3b refactor: split _report fn further into init and config part 2016-05-24 10:56:57 +02:00
Alasdair G Kergon
b896f7de1e raid0: Standardise meta_areas checks before access. 2016-05-23 22:55:13 +01:00
David Teigland
9b640c3684 pvscan: use process_each_vg for autoactivate
This refactors the code for autoactivation.  Previously,
as each PV was found, it would be sent to lvmetad, and
the VG would be autoactivated using a non-standard VG
processing function (the "activation_handler") called via
a function pointer from within the lvmetad notification path.

Now, any scanning that the command needs to do (scanning
only the named device args, or scanning all devices when
there are no args), is done first, before any activation
is attempted.  During the scans, the VG names are saved.
After scanning is complete, process_each_vg is used to do
autoactivation of the saved VG names.  This makes pvscan
activation much more similar to activation done with
vgchange or lvchange.

The separate autoactivate phase also means that if lvmetad
is disabled (either before or during the scan), the command
can continue with the activation step by simply not using
lvmetad and reverting to disk scanning to do the
activation.
2016-05-23 11:57:32 -05:00
David Teigland
55683a659f toollib: add vg name list arg to process_each_vg 2016-05-23 11:18:16 -05:00
Alasdair G Kergon
bf8d00985a raid0: Add raid0 segment type.
This remains experimental and quite restrictive so should only be used
for testing at this stage.  (E.g. lvreduce is not supported.)
2016-05-23 16:46:38 +01:00
David Teigland
ad4ca55543 tools: improve error message about VG name and select 2016-05-19 15:06:56 -05:00
Zdenek Kabelac
197066c863 lvchange: allow change of cache mode
Add support for active cache LV.
Handle --cachemode args validation during command line processing.
Rework some lvm2 internal to use lvm2 defined  CACHE_MODE  enums
indepently on libdm defines and use enum around the code instead
of passing and comparing strings.
2016-05-19 18:40:14 +02:00
David Teigland
ba9b7b69d9 pvremove: allow clearing a duplicate PV
Add a special case to allow modifying a duplicate PV
to erase it with pvremove -ff.
2016-05-16 14:40:43 -05:00
Peter Rajnoha
5c18b0ce9c refactor: separate original _report fn into _report and _do_report fn
The _report fn is getting big - separate it in two:

  - _report fn to get all the options and arguments
  - _do_report fn for reporting itself

Also, place all the variables/arguments in one structure for easier
handling of the variables around.
2016-05-10 14:00:13 +02:00
David Teigland
e84fb639f0 lvmetad: add duplicate resolution advice 2016-05-06 09:00:00 -05:00
David Teigland
d3d13e134a lvmcache: process duplicate PVs directly
Previously, duplicate PVs were processed as a side effect
of processing the "chosen" PV in lvmcache.  The duplicate
PV would be hacked into lvmcache temporarily in place of
the chosen PV.

In the old way, we had to always process the "chosen" PV
device, even if a duplicate of it was named on the command
line.  This meant we were processing a different device than
was asked for.  This could be worked around by naming
multiple duplicate devs on the command line in which case
they were swapped in and out of lvmcache for processing.

Now, the duplicate devs are processed directly in their
own processing loop.  This means we can remove the old
hacks related to processing dups as a side effect of
processing the chosen device.  We can now simply process
the device that was named on the command line.

When the same PVID exists on two or more devices, one device
is preferred and used in the VG, and the others are duplicates
and are not used in the VG.  The preferred device exists in
lvmcache as usual.  The duplicates exist in a specical list
of unused duplicate devices.

The duplicate devs have the "d" attribute and the "duplicate"
reporting field displays "duplicate" for them.

'pvs' warns about duplicates, but the formal output only
includes the single preferred PV.

'pvs -a' has the same warnings, and the duplicate devs are
included in the output.

'pvs <path>' has the same warnings, and displays the named
device, whether it is preferred or a duplicate.
2016-05-06 09:00:00 -05:00
David Teigland
8b7a78c728 lvmcache: improve duplicate PV handling
Wait to compare and choose alternate duplicate devices until
after all devices are scanned.  During scanning, the first
duplicate dev is kept in lvmcache, and others are kept in a
new list (_found_duplicate_devs).

After all devices are scanned, compare all the duplicates
available for a given PVID and decide which is best.

If the dev used in lvmcache is changed, drop the old dev
from lvmcache entirely and rescan the replacement dev.
Previously the VG metadata from the old dev was kept in
lvmcache and only the dev was replaced.

A new config setting devices/allow_changes_with_duplicate_pvs
can be set to 0 which disallows modifying a VG or activating
LVs in it when the VG contains PVs with duplicate devices.
Set to 1 is the old behavior which allowed the VG to be
changed.

The logic for which of two devs is preferred has changed.
The primary goal is to choose a device that is currently
in use if the other isn't, e.g. by an active LV.

. prefer dev with fs mounted if the other doesn't, else
. prefer dev that is dm if the other isn't, else
. prefer dev in subsystem if the other isn't

If neither device is preferred by these rules, then don't
change devices in lvmcache, leaving the one that was found
first.

The previous logic for preferring a device was:

. prefer dev in subsystem if the other isn't, else
. prefer dev without holders if the other has holders, else
. prefer dev that is dm if the other isn't
2016-05-06 09:00:00 -05:00
David Teigland
a1dbd54885 pvscan: fix errors for single dev scan while lvmetad is disabled
While lvmetad was disabled, 'pvscan --cache dev' would produce
confusing error messages.
2016-05-06 08:59:59 -05:00