IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When lvm2 calculates the maximal usable COW size and crops the user
requested size to this value, don't return the error result from
the 'lvextend' operation.
We already apply the same logic when resizing thin-pool beyond
the supported maximal size.
FIXME: The return code error logic here is somewhat fuzzy.
This vdo parameter existed in the early stage of integration of vdo into lvm2,
but later it's been removed from vdoformat tool - so actually if
there would be any non-zero value it would cause error on lvcreate.
Option was not stored on disk in lvm2 metadata.
Remove this vdo parameter from lvm2 sources.
(Although this vdo parameter will be still accepted on cmdline through
--vdosettings option, but it will be ignored.)
Fix in the code that matches devices to system.devices entries when
the devices have the same serial number. A non-PV device in
system.devices has no pvid value, and the code was segfaulting
when checking the null pvid value.
In previous lvm versions, trailing spaces at the end of a t10 wwid would
be replaced with underscores, so the IDNAME string in system.devices
would look something like "t10.123_". Current versions of lvm ignore
trailing spaces in a t10 wwid, so the IDNAME string used would be
"t10.123". The different values would cause lvm to not recognize a
device in system.devices with the trailing _. Fix this by ignoring
trailing underscores in the IDNAME string from system.devices.
The recent fix 05c2b10c5d ensures that raid LV images are not
using the same devices. This was happening in the lvextend commands
used by this test, so fix the test to use more devices to ensue
redundancy.
In case of e.g. 3 PVs, creating or extending a RaidLV causes SubLV
collocation thus putting segments of diffent rimage (and potentially
larger rmeta) SubLVs onto the same PV. For redundant RaidLVs this'll
compromise redundancy. Fix by detecting such bogus allocation on
lvcreate/lvextend and reject the request.
lvreduce uses _lvseg_get_stripes() which was unable to get raid stripe
info with an integrity layer present. This caused lvreduce on a
raid+integrity LV to fail prematurely when checking stripe parameters.
An unhelpful error message about stripe size would be printed.
When lvmcache info is dropped because it's an md component,
then the lvmcache vginfo can also be dropped, but the list
iterator was still using the list head in vginfo, so break
from the loop earlier to avoid it.
There is no easy way to detect, whether device supports zeroing,
and kernel also zeroes device when it's not directly supported,
but with extra message:
operation not supported error, dev X, sector Y op 0x9:(WRITE_ZEROES)...
So to avoid generating such message with every 'lvcreate', use for
zeroing of upto 8K just standard write of zeroed page.
(maybe we can go with even larger sizes).
Instead of using size of 'empty header' in vdopool use fixed size 4K
for a 'wrappeing' vdo-pool device.
This fixes the issue when user tried to activate vdo-pool after
a conversion from vdo managed device with 'vgchange -ay' - where
this command activated all LVs with 'vdo-pool' wrapping device as well,
but this converted pool uses 0-length header.
This 4k size should usually prevent other tools like 'blkid' recognize
such device as anything - so it shouldn't cause any problems with
duplicate indentification of devices.
Remove old code that became incorrect at some point.
It's probably a fragment of an old condition that was left
behind because it wasn't understood. We don't want to drop
the MISSING_PV flag just because the PV has no mda in use.
The device that was missing may have stale data, so the user
needs to decide if the device should be removed or restored.
Replace spaces with \040 in directory paths from getmntent (mtab).
The recent commit 5374a44c57 compares mount point directory paths
from /etc/mtab and /proc/mounts, in order to detect when a mounted
LV has been renamed. The directory path comparison does not work
correctly when the path contains spaces because getmntent uses
ascii space chars and proc replaces spaces with \040.
Coverity is complaining about unchecked strcpy here, which is
irelevant as we preallocate buffer to fit in copied string,
however we could actually reuse these size and use just memcpy().
So lets make some simple conversions.
With the recent use of DEVLINKS, there is no longer any real
point in checking the filter for symlink names. Removing
this check should not change behavior with or without symlinks
in the filter.
"vgchange -aay --autoactivation event" is called by our udev rule.
When the udev rule runs, symlinks for devices may not all be created
yet. If the regex filter contains symlinks, it won't work correctly.
This command uses devices that already passed through pvscan. Since
pvscan applies the regex filter correctly, this command inherits the
filtering from pvscan and can skip the regex filter itself.
See the previous commit
"pvscan: use alternate device names from DEVLINKS to check filter"
pvscan --cache <dev> is called by our udev rule at a time when all
the symlinks for <dev> may not be created yet (by other udev rules.)
The regex filter in lvm.conf may refer to <dev> using a symlink name
that hasn't yet been created, which would cause <dev> to not match
the filter regex. The DEVLINKS env var, set by udev, contains all
the symlink names for <dev> that have been or will be created.
So, we add all these symlink names to dev->aliases, as if we had
found them in /dev. This allows <dev> to be recognized by a regex
filter containing a symlink for <dev>.
It looks like force was not being used to enable crypt resize,
but rather to force an inconsistency between LV and crypt
sizes, so this is either not needed or force in this case
should have some other meaning.
This reverts commit ed808a9b54.
Update previous commit
"lvresize: only resize crypt when fs resize is enabled"
to enable crypt resizing when --force is set and --resizefs
is not set. This is because it's been allowed in the past
and people have used it, but it's not a good idea.
There were a couple of cases where lvresize, without --fs resize,
was resizing the crypt layer above the LV. Resizing the crypt
layer should only be done when fs resizing is enabled (even if the
fs is already small enough due to being independently reduced.)
Also, check the size of the crypt device to see if it's already
been reduced independently, and skip the cryptsetup resize if
it's not needed.
Enhance checking vdo constains so it also handles changes of active VDO LVs
where only added difference is considered now.
For this also the reported informational message about used memory
was improved to only list consuming RAM blocks.
Introduce struct vdo_pool_size_config usable to calculate necessary
memory size for active VDO volume.
Function lv_vdo_pool_size_config() is able to read out this
configuration out of runtime DM table line.
Cover a case missed by the recent commit e0ea0706d
"report: query lvmlockd for lv_active_exclusively"
Fix the lv_active_exclusively value reported for thin LVs.
It's the thin pool that is locked in lvmlockd, and the thin
LV state was mistakenly being queried and not found.
Certain LV types like thin can only be activated exclusively, so
always report lv_active_exclusively true for these when active.
18722dfdf4 lvresize: restructure code
mistakenly changed the overprovisioning check from applying
to all lv_is_thin_type lvs to only lv_is_thin_pool lvs, so
it no longer applied when extending thin lvs. The result
was missing warning messages when extending thin lvs.
The recent change that verifies sys_serial system.devices entries
using the PVID did not exclude non-PV devices from being checked.
The verification code would attempt to use du->pvid which was null
for the non-PVs causing a segfault.
Query LV lock state in lvmlockd to report lv_active_exclusively
for active LVs in a shared VGs. As with all lvmlockd state,
it is from the perspective of the local node.
Signed-off-by: corubba <corubba@gmx.de>
Add a note to the manpage that lvmlockd is unable to determine
accurately and without side-effects whether a LV is remotely active.
Also change the value of the lv_active_remotely option from false to
undefined for shared VGs to distinctly communicate that inability to
users. Only for local VGs it can be definitely stated that they are not
remotely active.
Signed-off-by: corubba <corubba@gmx.de>
Handle multiple devices using the same serial number as
their device id. After matching devices to devices file
entries, if there is a discrepency between the ondisk PVID
and the devices file PVID, then rematch devices to
devices file entries using PVID, looking at all disks
on the system with the same serial number.
Only /sys/dev/block/major:minor/device/serial was read to find
a disk serial number, but a serial number seems to be reported
more often in other locations, so check these also:
/sys/dev/block/major:minor/device/vpd_pg80
/sys/class/block/vda/serial (for virtio disks only)
The lvm dbus daemon will auto activate on dbus API calls. To
prevent the dbus daemon starting when lvm command line tools are
being used we will check to see if the daemon is running first.
If the daemon is not running, we will not notify the daemon.
For this check to work it requires the changes done previously
with commit: 3fdf449348
Reviewed-by: David Teigland <teigland@redhat.com>
The number of extents for the sanlock lvmlock lv is calculated using
integer division, which rounds towards zero. With a physical extent size
of 129M, instead of the requested 256M the lv is only 129M (1 extent).
With any physical extent size greater than 256M the lv creation fails
because the number of extents is zero.
This is fixed by replacing the integer division with a division macro
that rounds up and thus guarantees that the size of the lv will always
be equal or greater than the requested size. Using the examples above, a
pes of 129M will result in a 258M lv (2 extents), pes of 300M in a 300M
lv (1 extent).
The re-calculation of the lv size in bytes and megabytes is only so the
debug output shows the correct values. The size in mb there is still
not byte-perfect-accurate, but good enough for a human-readable estimate;
and the exact size in bytes and extents is right next to it.
Signed-off-by: corubba <corubba@gmx.de>
When executing process_each_lv_in_vg, we process live LVs first and
after that, we process any historical LVs. In case we have just removed
an LV, which also means we have just made it "historical" and so it
appears as fresh item in vg->historical_lvs list, we have to skip it
when we get to processing historical LVs inside the same process_each_lv_in_vg
call.
The simplest approach here, without introducing another LV list, is to
simply mark such historical LVs as "fresh" directly in struct
historical_logical_volume when we have just removed the original LV
and created the historical LV for it. Then, we just need to check the
flag when processing historical LVs and skip it if it is "fresh".
When we read historical LVs out of metadata, they are marked as
"not fresh" and so they can be processed as usual.
This was mainly an issue in conjuction with -S|--select use:
# lvmconfig --type diff
metadata {
record_lvs_history=1
}
(In this example, a thin pool with lvol1 thin LV and lvol2 and lvol3 snapshots.)
# lvs -H vg -o name,pool_lv,full_ancestors,full_descendants
LV Pool FAncestors FDescendants
lvol1 pool lvol2,lvol3
lvol2 pool lvol1 lvol3
lvol3 pool lvol2,lvol1
pool
# lvremove -S 'name=lvol2'
Logical volume "lvol2" successfully removed.
Historical logical volume "lvol2" successfully removed.
...here, the historical LV lvol2 should not have been removed because
we have just removed its original non-historical lvol2 and the fresh
historical lvol2 must not be included in the same processing spree.
The new device_id types are: wwid_naa, wwid_eui, wwid_t10.
The new types use the specific wwid type in their name.
lvm currently gets the values for these types by reading
the device's vpd_pg83 sysfs file (this could change in the
future if better methods become available for reading the
values.)
If a device is added to the devices file using one of these
types, prior versions of lvm will not recognize the types
and will be unable to use the devices.
When adding a new device, lvm continues to first use sys_wwid
from the sysfs wwid file. If the device has no sysfs wwid file,
lvm now attempts to use one of the new types from vpd_pg83.
If a devices file entry with type sys_wwid does not match a
given device's sysfs wwid file, the sys_wwid value will also
be compared to that device's other wwids from its vpd_pg83 file.
If the kernel changes the wwid type reported from the sysfs
wwid file, e.g. from a device's t10 id to its naa id, then lvm
should still be able to match it correctly using the vpd_pg83
data which will include both ids.
t10 wwids are now edited in the same way that multipath does,
which is replacing a series of spaces with one _. Previously
lvm replaced every space with one _. Devices file entries
with the old form will be converted to the new shorter form.
Move the functions handling dev wwids.
Add dev flags indicating that wwids have been read from
sysfs wwid file or sysfs vpd_pg83 file. This can be
used to avoid rereading these.
Improve filter-mpath search for a device's wwid in
/etc/multipath/wwids, to avoid unnecessary rereading
of wwids from sysfs files.
Type 8 wwids from vpd_pg83 with naa or eui names should be
saved as those types.
These files are automatically cleared on reboot given
that /run is tmpfs, and that remains the primary way
of clearing online files.
But, if there's extreme use of vgcreate+pvscan+vgremove
between reboots, then removing online files in vgremove
will limit the number of unused online files using space
in /run.
The new option "--fs String" for lvresize/lvreduce/lvextend
controls the handling of file systems before/after resizing
the LV. --resizefs is the same as --fs resize.
The new option "--fsmode String" can be used to control
mounting and unmounting of the fs during resizing.
Possible --fs values:
checksize
Only applies to reducing size; does nothing for extend.
Check the fs size and reduce the LV if the fs is not using
the affected space, i.e. the fs does not need to be shrunk.
Fail the command without reducing the fs or LV if the fs is
using the affected space.
resize
Resize the fs using the fs-specific resize command.
This may include mounting, unmounting, or running fsck.
See --fsmode to control mounting behavior, and --nofsck to
disable fsck.
resize_fsadm
Use the old method of calling fsadm to handle the fs
(deprecated.) Warning: this option does not prevent lvreduce
from destroying file systems that are unmounted (or mounted
if prompts are skipped.)
ignore
Resize the LV without checking for or handling a file system.
Warning: using ignore when reducing the LV size may destroy the
file system.
Possible --fsmode values:
manage
Mount or unmount the fs as needed to resize the fs,
and attempt to restore the original mount state at the end.
nochange
Do not mount or unmount the fs. If mounting or unmounting
is required to resize the fs, then do not resize the fs or
the LV and fail the command.
offline
Unmount the fs if it is mounted, and resize the fs while it
is unmounted. If mounting is required to resize the fs,
then do not resize the fs or the LV and fail the command.
Notes on lvreduce:
When no --fs or --resizefs option is specified:
. lvextend default behavior is fs ignore.
. lvreduce default behavior is fs checksize
(includes activating the LV.)
With the exception of --fs resize_fsadm|ignore, lvreduce requires
the recent libblkid fields FSLASTBLOCK and FSBLOCKSIZE.
FSLASTBLOCK*FSBLOCKSIZE is the last byte used by the fs on the LV,
which determines if reducing the fs is necessary.
Fix lv_active to be of BIN type instead of STR. This allows lv_active to
follow the report/binary_values_as_numeric setting as well as --binary
cmd line switch. Also, it makes it possible to use -S|--select with
either textual or numeric representation of the value, like 'lvs -S
active=active' but also 'lvs -S active=1'.
Take the devices file lock before creating a new devices file.
(Was missed by the change to preemptively create the devices
file prior to setup_devices(), which was done to improve the
error path.)
Names matching internal code layout.
Functionc in thin_manip.c uses thin_pool in its name.
Keep 'pool' only for function working for both cache and thin pools.
No change of functionality.
If we failed or logged anything before we actually execute given command
in lvm shell, we couldn't report the log using lastlog command after.
This patch adds specific 'pre-cmd' log report object type to identify
such log messages and enables lastlog to report even this log.
pvcreate with --uuid would segfault if a devices file entry matched
the specified pvid, but the devices file entry had no device_id, which
could happen if the entry has a devname idtype.
When the volume size is extended, there is no need to flush
IO operations (nothing can be targeting new space yet).
VDO target is supported as target that can safely work with
this condition.
Such support is also needed, when extending VDOPOOL size
while the pool is reaching its capacity - since this allows
to continue working without reaching 'out-of-space' condition
due to flushing of all in flight IO.
When we wanted to insert '#' before a config line (to comment it out),
we used dm_pool_strndup to temporarily copy the space prefix first so
we can assemble the final line with:
"<space_prefix># <key>=<value>":
out of original:
"<space_prefix><key>=<value>".
The space_prefix copy is not necessary, we can just use fprintf's
precision modifier "%.*s" to print the exact part if we alrady
know space_prefix length.
The new --valuesonly option causes the lvmconfig output to contain only
values without keys for each config node. This is practical mainly in
case where we use lvmconfig in scripts and we want to assign the value
to a different custom key or simply output the value itself without the
key.
For example:
# lvmconfig --type full activation/raid_fault_policy
raid_fault_policy="warn"
# lvmconfig --type full activation/raid_fault_policy --valuesonly
"warn"
# my_var=$(lvmconfig --type full activation/raid_fault_policy --valuesonly)
# echo $my_var
"warn"
Internally, NUM and BIN fields are marked as DM_REPORT_FIELD_TYPE_NUM_NUMBER
through libdevmapper API. The new 'json_std' format mandates that the report
string representing such a value must be a number, not an arbitrary string.
This is because numeric values in 'json_std' format do not have double quotes
around them. This practically means, we can't use string synonyms
("named reserved values") for such values and the report string must always
represent a proper number.
With 'json' and 'basic' formats, this is not an issue because 'basic' format
doesn't have any structure or typing at all and 'json' format puts all values
in quotes, including numeric ones.
When we tested lvm2, the kernel injected various random faults.
(gdb) bt
...
(gdb) p vg
$1 = (struct volume_group *) 0x0
(gdb) p use_previous_vg
$2 = (unsigned int *) 0x0
Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com>
When lvcreate is makeing VDO pool and user has not specified -V size,
ATM we actually run 'vdoformat' twice to get properly 'extent' aligned
size matching lvm2 properties - so the 2nd. run of vdoformat actually
can stay with 'log_verbose()' so the standard printed result
is not showing confusing info (which is now also correctly using
print_unless_silent)
The 'pe_start' column was incorrectly marked as being of type NUM.
This was not correct as pe_start is actually of type SIZ, which means
it can have a size suffix and hence it's not a pure numeric value.
Proper column type is important for selection to work correctly, so we
can also do comparisons while using suffixes.
This is also important for new "json_std" output format which does not
put double quotes around pure numeric values. With pe_start incorrectly
marked as NUM instead of SIZ, this produced invalid JSON output
like '"pe_start" = 1.00m' because it contained the 'm' (or other)
size suffix. If properly marked as SIZ, this is then put in double
quotes like '"pe_start" = "1.00m"'.
multipath_component_detection=0 has always applied to the filter-based
component detection. Also apply this setting to the duplicate-PV
handling which also eliminates multipath components (based on duplicate
PVs having the same wwid.)
When creating VDO pool based of % values, lvm2 is now more clever
and avoids to create 'unsupportable' sizes of physical backend
volumes as 16TiB is maximum size supported by VDO target
(and also limited by maximum supportable slabs (8192) based on slab
size.
If the requested virtual size is approaching max supported size 4PiB,
switch header size to 0.
Newer VDO kernel target require to have matching virtual size - this
however cause incompatiblity when lvcreate is let to format VDO data
device and read the usable size from vdoformat.
Altough this is a kernel regression and will likely get fixed,
lvm2 can actually reformat VDO device to use properly aligned VDO LV
size to make this problem disappear.
Add function to check for avaialble memory for particular VDO
configuration - to avoid unnecessary machine swapping for configs
that will not fit into memory (possibly in locked section).
Formula tries to estimate RAM size machine can use also with
swapping for kernel target - but still leaving some amount of
usable RAM.
Estimation is based on documented RAM usage of VDO target.
If the /proc/meminfo would be theoretically unavailable, try to use
'sysinfo()' function, however this is giving only free RAM without
the knowledge about how much RAM could be eventually swapped.
TODO: move _get_memory_info() into generic lvm2 API function used
by other targets with non-trivial memory requirements.
Keep single source for most of values printed in lvm.conf
(still needs some conversion)
Correct max for logical threads to 60
(we may refuse some older configuration which might eventually
user higher numbers - but so far let's assume no user have ever set this
as it's been non-trivial and if would complicate code unnecessarily.)
Accept maximum of 4PiB for virtual size of VDO LV
(lvm2 will drop 'header borders to 0 for this case').
to compare with wwids in /etc/multipath/wwids when
excluding multipath components. The wwid printed
from the sysfs wwid file may not be the wwid used
in multipath wwids. Save the wwids found for each
device on dev->wwids to avoid repeating reading
and parsing the sysfs files.
Fixes commit 494372b4ee
"filter-mpath: use multipath blacklist"
to handle wwids with initial type digits 1 and 2 used
for t10 and eui ids. Originally recognized type 3 naa.
A typo of the filename after --devicesfile should result in a
command error rather than the command falling back to using no
devices file at all. Exception is vgcreate|pvcreate which
create a new devices file if the file name doesn't exist.
Explicit wwid's from these sections control whether the
same wwid in /etc/multipath/wwids is recognized as a
multipath component. Other non-wwid keywords are not
used, and may require disabling the use of the multipath
wwids file in lvm.conf.
Change messages that refer to devices being "excluded by filters"
to say just "excluded". This will avoid mistaking the word
"filters" with the lvm.conf filter setting.
Warn if a scsi device is listed in the devices file that
is used by a multipath device that is not listed. This
will happen if a scsi device is listed in the devices
file and then an mpath device is set up to use it.
The way to correct this would be to remove the devices
file entry for the component device and add a new entry
for the multipath device.
When thin-pool had queued some delete message on extension operation
such message has been 'lost' and thin-pool kernel metadata has been
left with a thin volume that no longer existed for lvm2 metadata.
dev_name(dev) returns "[unknown]" if there are no names
on dev->aliases. It's meant mainly for log messages.
Many places assume a valid path name is returned, and
use it directly. A caller that wants to use the path
from dev_name() must first check if the dev has any
paths with dm_list_empty(&dev->aliases).
Use dev_cache_get_existing() in a few common, high level
locations where it's obvious that only existing dev-cache
entries are wanted. This can be expanded and used in more
locations (or dev_cache_get can stop creating new entries.)
along with some basic checks for cases when a device
has no aliases.
lvm itself creates many situations where a struct device
has no valid paths, when it activates and opens an LV,
does something with it, e.g. zeroing, and then closes
and deactivates it. (dev-cache is intended for PVs, and
the use of LVs should be moved out of dev-cache in a
future patch.)
Different target type for LV it's not an internal error.
i.e. when target type is replaced with 'error' type - it should be
reported as regular warning and not cause interruption of command with
internall error.
With very old version of DM target driver we have to avoid
trying to use newuuid setting - otherwise we get error
during ioctl preparation phase.
Patch is fixing regression from commit:
988ea0e94c
In a certain disconnected state, a block device is present on
the system, can be opened, reports a valid size, reports the
correct device id (wwid), and matches a devices file entry.
But, reading the device can still fail. In this case,
device_ids_validate() was misinterpreting the read error as
the device having no data/label on it (and no PVID).
The validate function would then clear the PVID from the
devices file entry for the device, thinking that it was
fixing the devices file (making it consistent with the on disk
state.) Fix this by not attempting to check and correct a
devices file entry that cannot be read. Also make this case
explicit in the hints validation code (which was doing the
right thing but indirectly.)
When compiled and used with:
CFLAGS="-fsanitize=address -g -O0"
ASAN_OPTIONS=strict_string_checks=1:detect_stack_use_after_return=1:check_initialization_order=1:strict_init_order=1
we have few reported issue - they where not normally spotted, since
we were still accessing our own memory - but ouf of buffer-range.
TODO: there is still something to enhance with handling of #orphan vgids
event based autoactivation is now the only method that lvm
provides for autoactivation.
Setting lvm.conf event_activation=0 can still be used to disable
event based autoactivation commands, but doing so will no longer
enable static autoactivation.
Removes some incorrect and unnecessary checks for other entries
when adding a new devices. The removed checks and corrections were
mostly redundant with what is already done by device id matching.
Other checking is reworked so the warnings are a bit different.
When a device has a wwid (from sysfs), but lvm ignores the wwid,
e.g. because it contains an unreliable "QEMU" value, then lvm
falls back to using IDTYPE=devname (the device name) as the
device id. If the device name changes after reboot, then lvm
automatically searches for the PV on other devices to find the
new device name and correct system.devices. When searching for
the PV, lvm skips looking at devices that would use other id types,
e.g. if a device would use a wwid and not a devname, then it
skips checking it. However, it failed to account for the fact
that a device may have wwid that was ignored, in which case it
should be checked.
. error exit means that lvmdevices --update would make a change.
. remove check of PART field from --check because it isn't used.
. unlink searched_devnames file to ensure check|update will search
The approach to duplicate VGIDs has been that it is not possible
or not allowed, so the behavior has been undefined. The actual
result was unpredictable and/or broken, and generally unhelpful.
Improve this by recognizing the problem, displaying the VGs,
and printing a warning to fix the problem. Beyond this,
using VGs with duplicate VGIDs remains undefined, but should
work well enough to correct the problem with vgchange -u.
It's possible to create this condition without too much difficulty
by cloning PVs, followed by an incomplete attempt at making the two
VGs unique (vgrename and pvchange -u, but missing vgchange -u.)
After a vg_write, this function was used to attempt to
make lvmcache data match the new state written to disk.
It was not updated correctly in a many or most cases,
and the resulting lvmcache is not actually used after
vg_write, making the update unnecessary.
This reverts commit bd2baeaaa6.
This commit broke vgrename because vgrename relies on old bugs
in lvmcache_update_vg_from_write and lvmcache_update_vgname
which need to be fixed first.
The approach to duplicate VGIDs has been that it is not possible
or not allowed, so the behavior has been undefined. The actual
result was unpredictable and/or broken, and generally unhelpful.
Improve this by recognizing the problem, displaying the VGs,
and printing a warning to fix the problem. Beyond this,
using VGs with duplicate VGIDs remains undefined, but should
work well enough to correct the problem with vgchange -u.
It's possible to create this condition without too much difficulty
by cloning PVs, followed by an incomplete attempt at making the two
VGs unique (vgrename and pvchange -u, but missing vgchange -u.)
Since we check for present DM devices - cache result for
futher use of checking presence of such device.
lvm2 uses cache result for label scan, but also when
it tries to activate or deactivate LV - however only simple
target 'striped' is reasonably supported.
Use disable_dm_devs to be able to control when lv_info()
get cache or uncached results.
TODO: support more type, however this is getting very complicated.
Description stolen from linux d/b/rbd.c L3:
rbd.c -- Export ceph rados objects as a Linux block device
16 partitions seem to make sense according to L90:
#define RBD_SINGLE_MAJOR_PART_SHIFT 4
Running *scan -vvvvvvdddddd yields
#filters/filter-type.c:28 /dev/rbd1p5: Skipping: Unrecognised LVM device type 252
#filters/filter-persistent.c:131 filter caching bad /dev/rbd1p5
right now, and adding
types = ["rbd", 252]
to /e/l/lvm.conf (with the matching "252 rbd" in /p/devices) works as a
per-machine fix:
rbd1 252:16 0 1T 1 disk
|-rbd1p1 252:17 0 243M 1 part
|-rbd1p2 252:18 0 1K 1 part
`-rbd1p5 252:21 0 1023.8G 1 part
`-dev01--vg-root 253:0 0 1023.8G 0 lvm
but rbd is supported by upstream so it'd be nice to have it work OOB
Improve handling of md components that get through the
filter, like the previous improvement for multipath.
If md components get through the filter and trigger
duplicate PV code, then eliminate any devs entirely
that are not an md device.
If multipath component devices get through the filter and
cause lvm to see duplicate PVs, then check the wwid of the
devs and drop the component devices as if they had been
filtered. If a dm mpath device was found among the duplicates
then use that as the PV, otherwise do not use any of the
components as the PV.
"duplicate PVs" associated with multipath configs will no
longer stop commands from working.
Remove the searched_devnames file in a couple more places:
. When hints need refreshing it's possible that a missing
devices file entry could be found by searching devices
again.
. When a devices file entry devname is first found to be
incorrect, a new search for missing entries may be
useful.
When devnames are used as device ids and devnames change,
then new devices need to be located for the PVs. If the old
devname is now used by a filtered device, this was preventing
the code from searching for the new device, so the PV was
reported as missing.
If the optimized label scan fails (using online files),
then clear the device state prior to falling back to the
standard label_scan. This avoids printing output about
unexpected state.
Copy another optimization from pvscan -aay to vgchange -aay.
When using the optimized label scan for only one VG, acquire the
VG lock prior to the scan. This allows vg_read to then skip the
repeated label scan that normally happens after locking the vg.
Include the device name in the /run/lvm/pvs_online/pvid files.
Commands using the pvid file can use the devname to more quickly
find the correct device, vs finding the device using the
major:minor number. If the devname in the pvid file is missing
or incorrect, fall back to using the devno.
For completeness and consistency, adjust the behavior
for some variations of:
vgchange -aay --autoactivation event [vgname]
The current standard use is with a VG name arg, and the
command is only called when all pvs_online files exist.
This is the optimal case, in which only pvs_online devs
are read. This remains the same.
Clean up behaviors for some other unexpected uses of the
command:
. With no VG name arg, the command activates any VGs
that are complete according to pvs_online. If no
pvs_online files exist, it does nothing.
. If a VG name is used but no PVs online files exist for
the VG, or the PVs online files are incomplete, then
consider there could be a problem with the pvs_online
files, and fall back to a full label scan prior to
attempting the activation.
Part of the optimization to avoid a full dev_cache_scan requires
translating major:minor numbers to a device name. If this devno
translation fails, then fall back to doing a full dev_cache_scan
which is slower but certain to provide the info. This preserves
the most important part of the label scanning optimization in the
vgchange aay (avoiding dev_cache_scan is a relatively small part
of the optimized activation compared to label scanning.)
Port another optimization from pvscan -aay to vgchange -aay:
"pvscan: only add device args to dev cache"
This optimization avoids doing a full dev_cache_scan, and
instead populates dev-cache with only the devices in the
VG being activated.
This involves shifting the use of pvs_online files from
the hints interface up to the higher level label_scan
interface. This specialized label_scan is structured
around creating a list of devices from the pvs_online
files. Previously, a list of all devices was created
first, and then reduced based on the pvs_online files.
The initial step of listing all devices was slow when
thousands of devices are present on the system.
This optimization extends the previous optimization that
used pvs_online files to limit the devices that were
actually scanned (i.e. reading to identify the device):
"vgchange -aay: optimize device scan using pvs_online files"
The information in /run/lvm/pvs_online/<pvid> files can
be used to build a list of devices for a given VG.
The pvscan -aay command has long used this information to
activate a VG while scanning only devices in that VG, which
is an important optimization for autoactivation.
This patch implements the same thing through the existing
device hints interface, so that the optimization can be
applied elsewhere. A future patch will take advantage of
this optimization in vgchange -aay, which is now used in
place of pvscan -aay for event activation.
When a device id is set for a device, using an idtype other
than devname, it means that sysfs has been used with the device
to match the device id. So, checking for a sysfs entry for the
device in filter-sysfs is redundant. For any other cases not
covered by this (e.g. devname ids), have filter-sysfs simply
stat /sys/dev/block/major:minor to test if the device exists
in sysfs.
The extensive processing done by filter-sysfs init is removed.
It was taking an immense amount of time with many devices, e.g.
. 1024 PVs in 520 VGs
. 520 concurrent vgchange -ay <vgname> commands
. vgchange scans only PVs in the named VG (based on pvs_online
files from a pending patch)
A large number of the vgchange commands were taking over 1 min,
and nearly half of that time was used by filter-sysfs init.
With this patch, the vgchange commands take about half the time.
When scanning configured /dev dir, avoid entring
directories with different filesystem.
This minimizes risk we will block on i.e. entring
directory with mount point.
Resolve event_activation configure option just once.
Do not print debug_devs about 'bad' filtering, when
actually filter already printed reason for skipping
Do not trace more then once about backup being disabled.
No debug when unlinked file does not exists in pvscan.
Reporting non-PVs / "all devices" is only done by
pvs -a or pvdisplay -a, so avoid the work managing
a list of all devices in process_each_pv.
In the case when it's needed, use the results of
label_scan which already determines which devs
are not PVs.
Just setting lvm.conf level=N should not send messages to
syslog (now the journal by default.)
Sending messages to syslog should require setting lvm.conf
log { syslog=1 level=N }.
Configure via lvm.conf log/journal or command line --journal.
Possible values:
"command" records command information.
"output" records default command output.
"debug" records full command debugging.
Multiple values can be set in lvm.conf as an array.
One value can be set in --journal which is added to
values set in lvm.conf
pvscan --cache <dev>
. read only dev
. create online file for dev
pvscan --listvg <dev>
. read only dev
. list VG using dev
pvscan --listlvs <dev>
. read only dev
. list VG using dev
. list LVs using dev
pvscan --cache --listvg [--checkcomplete] <dev>
. read only dev
. create online file for dev
. list VG using dev
. [check online files and report if VG is complete]
pvscan --cache --listlvs [--checkcomplete] <dev>
. read only dev
. create online file for dev
. list VG using dev
. list LVs using dev
. [check online files and report if VG is complete]
. [check online files and report if LVs are complete]
[--vgonline]
can be used with --checkcomplete, to enable use of a vg online
file. This results in only the first pvscan command to see
the complete VG to report 'VG complete', and others will report
'VG finished'. This allows the caller to easily run a single
activation of the VG.
[--udevoutput]
can be used with --cache --listvg --checkcomplete, to enable
an output mode that prints LVM_VG_NAME_COMPLETE='vgname' that
a udev rule can import, and prevents other output from the
command (other output causes udev to ignore the command.)
The list of complete LVs is meant to be passed to lvchange -aay,
or the complete VG used with vgchange -aay.
When --checkcomplete is used, lvm assumes that that the output
will be used to trigger event-based autoactivation, so the pvscan
does nothing if event_activation=0 and --checkcomplete is used.
Example of listlvs
------------------
$ lvs -a vg -olvname,devices
LV Devices
lv_a /dev/loop0(0)
lv_ab /dev/loop0(1),/dev/loop1(1)
lv_abc /dev/loop0(3),/dev/loop1(3),/dev/loop2(1)
lv_b /dev/loop1(0)
lv_c /dev/loop2(0)
$ pvscan --cache --listlvs --checkcomplete /dev/loop0
pvscan[35680] PV /dev/loop0 online, VG vg incomplete (need 2).
VG vg incomplete
LV vg/lv_a complete
LV vg/lv_ab incomplete
LV vg/lv_abc incomplete
$ pvscan --cache --listlvs --checkcomplete /dev/loop1
pvscan[35681] PV /dev/loop1 online, VG vg incomplete (need 1).
VG vg incomplete
LV vg/lv_b complete
LV vg/lv_ab complete
LV vg/lv_abc incomplete
$ pvscan --cache --listlvs --checkcomplete /dev/loop2
pvscan[35682] PV /dev/loop2 online, VG vg is complete.
VG vg complete
LV vg/lv_c complete
LV vg/lv_abc complete
Example of listvg
-----------------
$ pvscan --cache --listvg --checkcomplete /dev/loop0
pvscan[35684] PV /dev/loop0 online, VG vg incomplete (need 2).
VG vg incomplete
$ pvscan --cache --listvg --checkcomplete /dev/loop1
pvscan[35685] PV /dev/loop1 online, VG vg incomplete (need 1).
VG vg incomplete
$ pvscan --cache --listvg --checkcomplete /dev/loop2
pvscan[35686] PV /dev/loop2 online, VG vg is complete.
VG vg complete
The new system_id_source="appmachineid" will cause
lvm to use an lvm-specific derivation of the machine-id,
instead of the machine-id directly. This is now
recommended in place of using machineid.
Do not store full path with each archived name reduces memory usage if
the directory has thousands of entries and just add 'dir' path when
needed.
Also emit info print message to a user if the total size of archived
files for a VG is more then 128MiB or 8192 files.
TODO: Consider wheather adding a new 'lvm.conf archive{option}' to support
trimming these wild archive sizes can make situation better.
We already support retain_min && retain_days - but if user is
generating too many and too large archives with minutes - maybe archiving
should be disabled by a user - as it's not producing anything largely usable
and just slows-down command ??
If we add 'retain_max & retain_max_size' the condition will go against
each other and we need to chose priorities.
mm
Consider missing config tree from vg read to be an internal error
since we do not want to 'regenerate' this one in expesive parsing way.
Also if there is any failure on recreating committed VG, make it also
a 'vg_write' error.
Corrupt metadata text (with good mda header) was being handled
in the label_scan phase, but not in the vg_read phase. This
was sufficient because metadata areas would always be read and
checksummed during label_scan (metadata parsing was skipped
previously as an optimization.)
This changed with the optimization in
commit 61a6f9905e
"metadata: optimize reading metadata copies in scan"
Now, some metadata areas will not be read and checksummed
at all during the label_scan phase, only during the vg_read
phase. This means that bad metadata text may first be detected
in the vg_read phase. So, add equivalent bad metadata handling
to the vg_read path to match the label_scan path.
While being in lockless scanning phase, we can avoid reading and checking
matching metadata copies if we already know them from other PV
and just rely on matching metadata header information.
These copies will be examined later during locked metadata read/write
access.
This patch may postpone discovering some read failures to locked phase.
When creating lvm2 metadata for VG, lvm2 allocate some buffer,
and if buffer is not big enough, the buffer is 'reallocated' bigger,
and whole metadata creation is repeated until metadata fits.
We can try to use 'previous' metadata size as hint to reduce looping
here.
Preserve computed crc32 check from first written PV, just like we
preserve generated metadata.
Also there is no need to call crc32 twice on wrapping buffer with 2 calcs,
result must be always the same as with single crc32 checking.
sysconf() may also return -1 although rather theoretically.
Default to 4K when such case would happen.
Also in function call it just once and keep as static variable.
Ensure only nonNULL 'du' pointer is dereference altough the comment
to the last assign 'du' pointer already suggest 'NULL' case should not happen.
So just being explicit.
mer du
Error path in _lockd_retrive_vg_pv_list() has not zeroed released path
caussing possible double-free later in the code.
Fix it by using one single function freeing lock_pvs structure.
When cache creation fails on table reload path, implemen more
advanced revert solution, that tries to restore state of LVM
metadata into is look before actual caching started.
Loading invalid MQ/SMQ policy settings table line cause immediate
rejection - to prevent such failure, automatically filter valid
settins before it is being uploaded by lvm2.
For invalid setting issue a warnning informing user how to remove
them.
This solution is used to keep running cached LVs that might had
been created in the past with invalid settings that have been actually
unused due to another code bug.
New versions of kvdo module exposes statistics at new location:
/sys/block/dm-XXX/vdo/statistics/...
Enhance lvm2 to access this location first.
Also if the statistic info is missing - make it 'debug' level info,
so it is not failing 'lvs' command.
Since VDO is always returns 'zero' on unprovisioned read
and every provisioned block is always 'zeroed' on partial writes,
we can avoid 'zeroing' of such LVs.
Some device id types can only be used with specific device major
numbers, so use this restriction to avoid some comparisions.
This is more efficient, and can avoid some incorrect matches.
pvid and vgid are sometimes a null-terminated string, and
other times a 'struct id', and the two types were often
cast between each other. When a struct id was cast to a char
pointer, the resulting string would not necessarily be null
terminated. Casting a null-terminated string id to a
struct id is fine, but is still avoided when possible.
A struct id is: int8_t uuid[ID_LEN]
A string id is: char pvid[ID_LEN + 1]
A convention is introduced to help distinguish them:
- variables and struct fields named "pvid" or "vgid"
should be null-terminated strings.
- variables and struct fields named "pv_id" or "vg_id"
should be struct id's.
- examples:
char pvid[ID_LEN + 1];
char vgid[ID_LEN + 1];
struct id pv_id;
struct id vg_id;
Function names also attempt to follow this convention.
Avoid casting between the two types as much as possible,
with limited exceptions when known to be safe and clearly
commented.
Avoid using variations of strcpy and strcmp, and instead
use memcpy/memcmp with ID_LEN (with similar limited
exceptions possible.)
