1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

3329 Commits

Author SHA1 Message Date
David Teigland
22bee4fbdb help/man: remove commas from list of options
Using commas between options does not seem to
be done anywhere else, so remove them.
2017-02-15 15:51:46 -06:00
David Teigland
81c0ed9fc6 commands: use dm wrappers for malloc/free 2017-02-15 15:49:18 -06:00
David Teigland
6a5c9ba349 commands: use existing vg/lv name parsing functions
inside the new lv arg parsing function.

This includes getting the VG name from the env var,
and some added checks on the format of the vg/lv string.
2017-02-15 15:28:54 -06:00
David Teigland
2556498ee1 lvcreate: fix LVM_VG_NAME detection
Commit d3af0e7528 was
not quite right in testing if the env var was set.
2017-02-15 14:10:46 -06:00
David Teigland
4a30f5f9b0 toollib: skip dev prefix from lv names
_get_arg_lvnames_using_options() was missing skip_dev_dir()
2017-02-15 13:42:35 -06:00
David Teigland
286d39ee3c lvconvert: handle old arg quirk when combining snapshot
The old ad hoc arg parsing when combining a split snapshot
allowed the first lv to have a vgname, but not the second.
Since lvconvert now uses the standard arg parsing in
process_each_lv(), the old one-off behavior requires a
work around.
2017-02-15 12:40:35 -06:00
David Teigland
d3af0e7528 lvcreate: LVM_VG_NAME applies even without name arg
There was a small flaw in the logic regarding when LVM_VG_NAME
can replace a VG position arg.
2017-02-15 12:07:51 -06:00
David Teigland
7417c8acfa Revert "lvconvert: enable previous syntax to swap metadata"
This reverts commit 717363bb94.

These alternate forms for swapping metadata cannot be
distinguished from the command for creating a pool.
If we were to add these alternate forms for swapping
metadata, we would need to overload the pool creation
command defs, making those definitions ambiguous.
2017-02-14 16:02:54 -06:00
David Teigland
d2c5bb5c70 coverity cleanups 2017-02-14 15:53:29 -06:00
David Teigland
1236e0ed29 man-generator: fix compiler warnings 2017-02-14 10:28:52 -06:00
David Teigland
1dddb068c9 man/help: use separator in units list
h|H|b|B|... instead of hHbB...
2017-02-14 10:21:39 -06:00
David Teigland
c0f2a59993 commands: skip parsing command defs for other command names
The base command name can be used to skip parsing
command defs that will not be needed.
2017-02-14 10:16:13 -06:00
David Teigland
f46b28bdb6 commands: improve help/usage output
Replace --help --help with --long-help.
Some blank lines were needed.
Add 'lvm help all' to print help for all commands.
2017-02-14 09:52:09 -06:00
Zdenek Kabelac
22457ed4d9 makefiles: missing deps 2017-02-14 10:24:56 +01:00
Zdenek Kabelac
fc0e49297d makefiles: use configure vars
Use binaries found in configure.
2017-02-14 10:24:56 +01:00
David Teigland
5a87d8667d coverity cleanups for recent command defs commits 2017-02-13 16:11:04 -06:00
David Teigland
717363bb94 lvconvert: enable previous syntax to swap metadata 2017-02-13 14:41:54 -06:00
David Teigland
b2fd5b31d3 commands: suggest --help if command doesn't match 2017-02-13 13:46:17 -06:00
David Teigland
698abdde16 generate man pages 2017-02-13 10:31:23 -06:00
David Teigland
13a6368522 args: use arg parsing function for region size
Consolidate the validation of the region size arg
in a new arg parsing function.
2017-02-13 08:21:58 -06:00
David Teigland
a1386dcca0 lvconvert: remove code for changing region size
from the generic raid type conversion code.
2017-02-13 08:21:58 -06:00
David Teigland
46abc28a48 lvconvert: add command to change region size of a raid LV 2017-02-13 08:21:58 -06:00
David Teigland
8152e4a99e vgchange: fix uint32 parsing of logicalvolume arg 2017-02-13 08:20:10 -06:00
David Teigland
2224b6a701 commands: recognize raid variations 2017-02-13 08:20:10 -06:00
David Teigland
c3faa5816d commands: move command def parsing into lvm binary
It was previously done at build time by the ccmd binary.
2017-02-13 08:20:10 -06:00
David Teigland
942dc07402 lvconvert: remove unused code
For "split" which is not an alias for splitmirrors.
2017-02-13 08:20:10 -06:00
David Teigland
f067c0ad78 args: split is a synonym for splitcache
also tidy the other synonyms
2017-02-13 08:20:10 -06:00
David Teigland
15d9f2850e ccmd: split into multiple files 2017-02-13 08:20:10 -06:00
David Teigland
013c080756 command struct: remove command name refs
Change run time access to the command_name struct
cmd->cname instead of indirectly through
cmd->command->cname. This removes the two run time
fields from struct command.
2017-02-13 08:20:10 -06:00
David Teigland
d9d5b8414b command.h comment tidying 2017-02-13 08:20:10 -06:00
David Teigland
9a0f0c70bf lvm shell: clear argv for each command 2017-02-13 08:20:10 -06:00
David Teigland
23a1ced439 help: accept positional args
lvm help <commandname> ...
2017-02-13 08:20:10 -06:00
David Teigland
3642deb4f3 fix lvmcmdline warning
declaration of ‘usage’ shadows a globa
2017-02-13 08:20:10 -06:00
David Teigland
5c779b3231 args: add man page descriptions 2017-02-13 08:20:10 -06:00
David Teigland
db26a82f2f args: use uint32 arg for maxphysicalvolumes 2017-02-13 08:20:10 -06:00
David Teigland
041c2fef88 lvconvert: remove unused code 2017-02-13 08:20:10 -06:00
David Teigland
46b2599d5c lvconvert: use command defs for raid/mirror types
All lvconvert functionality has been moved out of the
previous monolithic lvconvert code, except conversions
related to raid/mirror/striped/linear.  This switches
that remaining code to be based on command defs, and
standard process_each_lv arg processing.  This final
switch results in quite a bit of dead code that is
also removed.
2017-02-13 08:20:10 -06:00
David Teigland
86d8ab493b lvconvert: use command defs for mergemirrors
and route the generic --merge to one of the
specific merge functions
2017-02-13 08:20:10 -06:00
David Teigland
95e38607ec toollib: find VG name in option values when needed 2017-02-13 08:20:10 -06:00
David Teigland
0e3e611a13 lvconvert: use command defs for thin/cache/pool creation
Everything related to thin and cache.
2017-02-13 08:20:10 -06:00
David Teigland
d71aaca07b lvconvert: add startpoll command using command def
This is a new explicit version of 'lvconvert LV'
which has been an obscure way of triggering polling
to be restarted on an LV that was previously converted.
2017-02-13 08:20:10 -06:00
David Teigland
fa2a728a39 lvconvert: snapshot: use command definitions
Lift all the snapshot utilities (merge, split, combine)
out of the monolithic lvconvert implementation, using
the command definitions.  The old code associated with
these commands is now unused and will be removed separately.
2017-02-13 08:20:10 -06:00
David Teigland
254bffb95d lvconvert: remove unused calls for repair and replace
repair and replace are no longer called from the
monolithic lvconvert code, so remove the unused code.
2017-02-13 08:20:10 -06:00
David Teigland
35b9d4d6e9 lvconvert: repair and replace: use command definitions
This lifts the lvconvert --repair and --replace commands
out of the monolithic lvconvert implementation.  The
previous calls into repair/replace can no longer be
reached and will be removed in a separate commit.
2017-02-13 08:20:10 -06:00
David Teigland
52c60b7e7b lvchange: make use of command definitions
Reorganize the lvchange code to take advantage of
the command definition, and remove the validation
that is done by the command definintion rules.
2017-02-13 08:20:10 -06:00
David Teigland
9c6c55c314 process_each_lv: add check_single_lv function
The new check_single_lv() function is called prior to the
existing process_single_lv().  If the check function returns 0,
the LV will not be processed.

The check_single_lv function is meant to be a standard method
to validate the combination of specific command + specific LV,
and decide if the combination is allowed.  The check_single
function can be used by anything that calls process_each_lv.

As commands are migrated to take advantage of command
definitions, each command definition gets its own entry
point which calls process_each for itself, passing a
pair of check_single/process_single functions which can
be specific to the narrowly defined command def.
2017-02-13 08:20:10 -06:00
David Teigland
1e2420bca8 commands: new method for defining commands
. Define a prototype for every lvm command.
. Match every user command with one definition.
. Generate help text and man pages from them.

The new file command-lines.in defines a prototype for every
unique lvm command.  A unique lvm command is a unique
combination of: command name + required option args +
required positional args.  Each of these prototypes also
includes the optional option args and optional positional
args that the command will accept, a description, and a
unique string ID for the definition.  Any valid command
will match one of the prototypes.

Here's an example of the lvresize command definitions from
command-lines.in, there are three unique lvresize commands:

lvresize --size SizeMB LV
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync, --reportformat String, --resizefs,
--stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB
OP: PV ...
ID: lvresize_by_size
DESC: Resize an LV by a specified size.

lvresize LV PV ...
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync,
--reportformat String, --resizefs, --stripes Number, --stripesize SizeKB
ID: lvresize_by_pv
DESC: Resize an LV by specified PV extents.
FLAGS: SECONDARY_SYNTAX

lvresize --poolmetadatasize SizeMB LV_thinpool
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync,
--reportformat String, --stripes Number, --stripesize SizeKB
OP: PV ...
ID: lvresize_pool_metadata_by_size
DESC: Resize a pool metadata SubLV by a specified size.

The three commands have separate definitions because they have
different required parameters.  Required parameters are specified
on the first line of the definition.  Optional options are
listed after OO, and optional positional args are listed after OP.

This data is used to generate corresponding command definition
structures for lvm in command-lines.h.  usage/help output is also
auto generated, so it is always in sync with the definitions.

Every user-entered command is compared against the set of
command structures, and matched with one.  An error is
reported if an entered command does not have the required
parameters for any definition.  The closest match is printed
as a suggestion, and running lvresize --help will display
the usage for each possible lvresize command.

The prototype syntax used for help/man output includes
required --option and positional args on the first line,
and optional --option and positional args enclosed in [ ]
on subsequent lines.

  command_name <required_opt_args> <required_pos_args>
          [ <optional_opt_args> ]
          [ <optional_pos_args> ]

Command definitions that are not to be advertised/suggested
have the flag SECONDARY_SYNTAX.  These commands will not be
printed in the normal help output.

Man page prototypes are also generated from the same original
command definitions, and are always in sync with the code
and help text.

Very early in command execution, a matching command definition
is found.  lvm then knows the operation being done, and that
the provided args conform to the definition.  This will allow
lots of ad hoc checking/validation to be removed throughout
the code.

Each command definition can also be routed to a specific
function to implement it.  The function is associated with
an enum value for the command definition (generated from
the ID string.)  These per-command-definition implementation
functions have not yet been created, so all commands
currently fall back to the existing per-command-name
implementation functions.

Using per-command-definition functions will allow lots of
code to be removed which tries to figure out what the
command is meant to do.  This is currently based on ad hoc
and complicated option analysis.  When using the new
functions, what the command is doing is already known
from the associated command definition.
2017-02-13 08:20:10 -06:00
Zdenek Kabelac
a3579aafc5 cleanup: use matching signed number comparation 2017-02-13 10:06:19 +01:00
Ondrej Kozina
035c614c19 dmsetup: do not suppress kernel key descriptions in tables
Kernel 4.10 (dm-crypt v1.15.0) and later supports loading device
tables with crypt segment having key in kernel keyring retention
service.

dmsetup hid key section of tables output. With this patch dmsetup
no longer hides key section if it detects kernel key description
instead of hex byte representation of key itself.
2017-02-10 19:18:49 +01:00
Heinz Mauelshagen
46a772fbc4 lvconvert: add support to change RAID region size (fixup)
Commit cfb6ef654d introduced
support to change RAID region size.

Add:
- missing conditions to support any types to function with
  it in lv_raid_convert();  temporary workaround used until
  cli validation patches get merged
- tests requesting "-R " to lvconvert-raid-takeover.sh
  involving a cleanup of the script

Related: rhbz1392947
2017-02-07 16:52:04 +01:00
Heinz Mauelshagen
cfb6ef654d lvconvert: add support to change RAID region size
Add:
- support to change region size of existing RaidLVs
  (all RAID LV types but raid0/raid0_meta)
- lvconvert-raid-regionsize.sh with test variations
  for different RAID types and region sizes

Resolves: rhbz1392947
2017-02-07 01:01:19 +01:00
Bryn M. Reeves
b999d5f501 dmstats: allow --filemap groups to be updated
Add a new update_filemap command to dmstats that allows a filemap
group to be updated:

  # dmstats update_filemap --groupid 0 vm.img
  /var/lib/libvirt/images/vm.img: Updated group ID 0 with 137 region(s).

This will update the set of regions mapped to the file to reflect
the current file system allocation.

Currently this needs to be run manually - a future update will add
support for monitoring file maps via a daemon, allowing them to be
automatically updated when the underlying file is modified.
2017-01-25 16:15:21 +00:00
Zdenek Kabelac
4a7f2155c1 clean: move code to lib part
Move actual processing part of the lvm2_disable_dmeventd_monitoring()
into a /lib part so we can reuse the code later for other cases.
2017-01-23 14:55:28 +01:00
Zdenek Kabelac
d80f9a107f lvmcmd2lib: support new command
Internal command which reads lvm.conf settins and passes it
via envvar to dmeventd monitoring thread.
2017-01-20 23:55:07 +01:00
Zdenek Kabelac
0d2a9ebec6 vgchange: also -l is uint32 2017-01-06 21:51:36 +01:00
Zdenek Kabelac
74969c9a38 report: report merged state for inactive LV
This was missing piece in 77997c7673.
When merging origin is inactive (while driver is loaded) we
could already report merge in progress values as there is
no way to activate 'old state' now.
2017-01-05 15:54:14 +01:00
Zdenek Kabelac
1f5dde38a7 cleanup: more use of lvseg_name
Use existing function lvseg_name().
2017-01-03 14:55:16 +01:00
Zdenek Kabelac
4fd41cf67f vgchange: max_pv limited to uint32
Solves: https://bugzilla.redhat.com/1280496

The only reasonable behaviour here is to error on
any number out of accepted range (i.e. now numbers
wrapping around with some hidden logic).

As this is plain bug there is no support for
backward compatibility since noone should
set numbers >UINT32_MAX and expect 0 or error
depending on how big number was used....

TODO: more fields might need to be converted.
2017-01-03 14:55:16 +01:00
Zdenek Kabelac
9f65a3f0c5 lvmcmdline: support uint32
Add simple function to wrap usage for only uint32 numbers.
Unlike  'int_arg'  which accepts full range of 64bit number
this function will error on numbers out of this range:

   <0, UINT32_MAX>
2017-01-03 14:55:16 +01:00
Zdenek Kabelac
77997c7673 report: show proper info for merging origin
When there is 'merging' of an origin in progress, but metadata stil
do provide both origin and snapshot, we should show data from merged
snapshot.  This is important mainly for thin case, where there was
a window, where i.e. 'lvs -o+device_id' would report information
about 'already gone' origin thin LV.

This race window is usually hard to trigger but can be ocasionally hit.
Usually shortly after activation, but before polling process manages
to update metadata after merge.
2016-12-22 23:37:07 +01:00
Zdenek Kabelac
2aee4769b4 snapshot: validate merge has started
Before starting polling process, validate the merge has actually started
so there is not pointless invoke of lvmpolld.

This also fixes reported message from command, so user has
correct info whether merging has already started or
if it's delayed for next activation.
2016-12-22 23:37:07 +01:00
Zdenek Kabelac
0c56eb8f43 cache: support cached origin for snapshot
Enable  'lvcreate/lvconvert -s' for cached LV.
and supported operations:

Create a snapshot of cached LV

Split/Join snapshot LV to cached origin LV.
2016-12-19 14:41:42 +01:00
Zdenek Kabelac
eb3f83357a lvconvert: fix shown lv name for snapshot split
We can't keep 'display_lvname' for too long - it's using
ringbuffer and keeps limited number of names. So it's
safe only per few simple tests,  but can't be used anymore
after some function calls..
(Fixes 00e641ef37)
2016-12-19 14:41:16 +01:00
Bryn M. Reeves
c90e9392e4 libdm: add dm_stats_bind_from_fd()
dmsetup already has a version of this function, and dmfilemapd will
need it too: move it to libdevmapper to avoid copying it around.
2016-12-18 20:47:17 +00:00
Zdenek Kabelac
5bb6266046 lvconvert: support cache to external origin conversion
Add this functionality to lvconvert:

'lvconvert --thin cachedLV --thinpool vg/poll'

Converts cachedLV to external origin (which will be read-only).
New thin volume is created in thinpool LV and it's using external
origin as source for unprovisioned chunks.
This conversion happens  online (while volume is in use).
Thin LV remains fully writable.
Cached external origin no longer could be written so cache will be used
ONLY for read operations. For this limitation we require cache mode
to be writethrough (as writeback cannot write to read-only volumes).

When  thinLV is later removed  cached external origin is again
fully usable, just note, LV remain in 'read-only' mode.
When read-write is needed,  'lvchange -prw' has to be used.

Single external origin could be user by multiple thinLV in
multiple differen thin pool.
2016-12-18 19:35:27 +01:00
Bryn M. Reeves
a15f0d181c dmstats: don't declare _start_timestamp if HAVE_SYS_TIMERFD_H
The _start_timestamp is not used by the TIMERFD clock.
2016-12-18 14:08:11 +00:00
Bryn M. Reeves
3e53adf7c0 dmstats: fix TIMERFD _timer_running() test 2016-12-18 14:07:25 +00:00
Bryn M. Reeves
5a4750d76c dmstats: fix interval number reporting with --count=0
When --count=0 interval numbers are miscalculated:

Interval     #18446744069414584325     time delta:    999920887ns
Interval     #18446744069414584325   current err:       -79113ns
End interval #18446744069414584325  duration:    999920887ns

This is because the command line argument is cast through the
uint32_t type, and fixed to UINT32_MAX:

  _count = ((uint32_t)_int_args[COUNT_ARG]) ? : UINT32_MAX;

We also need to handle --count=0 specially when calculating the
interval number: since intervals count from #1, this must account
for the implicit "minus one" when converting from zero to the
UINT64_MAX value used (which is too large to store in _int_args).
2016-12-18 13:03:45 +00:00
Bryn M. Reeves
5635cd3b03 dmstats: separate TIMERFD and useleep() exit conditions
The time management code mixes tests of the _timer_fd value with
code that should be timer agnostic: this causes problems for users
of the usleep() timer, since it cannot properly detect the start
of a new interval:

Beginning first interval
Interval     #18446744069414584348     time delta:   1000000000ns
Interval     #18446744069414584348   current err:            0ns
End interval #18446744069414584348  duration:   1000000000ns
Adjusted sample interval duration:   1000000000ns
[...]
Beginning first interval
Interval     #18446744069414584349     time delta:   1000000000ns
Interval     #18446744069414584349   current err:            0ns
End interval #18446744069414584349  duration:   1000000000ns
Adjusted sample interval duration:   1000000000ns

Separate these out, by defining a _timer_running() call that each
timer implements, and only define _timer_fd if we are compiling
with TIMERFD enabled.
2016-12-18 13:03:44 +00:00
Bryn M. Reeves
886b4f755d dmstats: use better interval estimate for usleep() timer
Although the usleep() interval timer is not used if the Linux
TIMERFD interface is available it should still provide reasonably
good timing.

Instead of trying to estimate the error from the duration of the
last sleep, peg it to the start time of the program, and use the
value of  ((start_time - now) % interval) to correct the current
interval duration.

This always pulls us back into sync at the end of each interval,
rather than relying on trying to incrementally adjust the time
duration at each interval start.

This greatly reduces drift when the usleep() clock is used.
2016-12-18 13:03:44 +00:00
Bryn M. Reeves
68ec42ebaf dmstats: improve tool help output and option coverage 2016-12-18 11:51:13 +00:00
Zdenek Kabelac
a8f5e1f274 cleanup: more lv_is_ usage 2016-12-13 22:07:52 +01:00
Zdenek Kabelac
b8c729efd0 cov: add internal error for impossible code path 2016-12-11 23:24:19 +01:00
Zdenek Kabelac
6cd68c55dd cleanup: reuse existing function
Call lv_update_and_reload implementation.
2016-12-11 23:24:19 +01:00
Zdenek Kabelac
3903f915f8 pvmove: fix activation order
For proper locking we need to gain lock first for mirror which
needs to be deactivated later to be working in cluster.
2016-12-11 23:22:36 +01:00
Zdenek Kabelac
6fd20be629 activation: lv_info_with_seg_status API change
Drop LV from passed API arg - it's always segment being checked.
Also use_layer is now in full control of lv_info_with_seg_status().
It decides which device needs to be checked to get 'the most info'.

TODO: future version should be able to expose status from
2016-12-05 17:09:47 +01:00
Zdenek Kabelac
ed93f0973a activation: lv_info_with_seg_status unify status selection
Start moving selection of status taken for a LV into a single place.
The logic for showing info & status has been spread over multiple
places and were doing too complex decision going agains each other.

Unify selection of status of origin & cow scanned device.

TODO: in future we want to grab status for LV and layered LV and have
both statuses present for display - i.e. when 'old snapshot'
of thinLV is takes and there is ongoing merge - at some moment
we are not capable to show all needed info.
2016-12-05 17:09:13 +01:00
Zdenek Kabelac
c10028dd8e cleanup: add missing WARNING into log_warn 2016-11-25 15:01:27 +01:00
Zdenek Kabelac
1a4f13eb6e cleanup: add some dots and use display_lvname
Just some more VG/LV printing.
2016-11-25 15:01:27 +01:00
Zdenek Kabelac
1d58074d9f debug: more stacktrace corrections
Continue previous patch dropping some unneeded stack traces
after printed log_error/warn messages.
2016-11-25 14:58:28 +01:00
Zdenek Kabelac
a7404b5b83 debug: stack tracing corrections 2016-11-23 17:55:03 +01:00
Zdenek Kabelac
c621bc3d36 cleanup: deactivate has builtin check for active lv 2016-11-23 17:55:03 +01:00
Zdenek Kabelac
5fd5cfe061 cleanup: use display_lvname and msg cleanup
Use display_lvname in tracing messages.
Add some missing 'dots' to messages.
2016-11-23 17:48:01 +01:00
Zdenek Kabelac
851095a6af raid: lvconvert uses transient check for raid
Also check if the raid status isn't teling us there is something wrong
with any raid image device.
2016-11-23 17:46:50 +01:00
Zdenek Kabelac
59b29716e5 lvconvert: repair accepts interval and background
For mirror and raid we expose --interval and --background on
command line (instead of using just always using compiled-in defaults).
2016-11-11 16:51:33 +01:00
Alasdair G Kergon
f8b3b0bc9a lvconvert: Introduce enum to separate cases.
Start to separate out the different things that lvconvert does by using
an enum to identify 12 distinct cases.
2016-11-11 00:27:01 +00:00
Heinz Mauelshagen
b11f4f93d7 dmsetup: [v2] return 0 for [--]{version,help}
Leverage 0b1c796420 to cope with "dmsetup SubCommand --{help,version}"
and bail out directly when _report_init() fails.

Related: rhbz1393692
2016-11-10 18:09:37 +01:00
Heinz Mauelshagen
0b1c796420 dmsetup: return 0 for [--]{version,help}
dmsetup regressed returning 1 when properly processing
version or help subcommands.

Resolves: rhbz1393692
2016-11-10 17:03:04 +01:00
Zdenek Kabelac
4e26024add cleanup: use WARNING prefix for log_warn
Use capital WARNING prefix for log_warn() messages.
2016-11-03 17:49:07 +01:00
David Teigland
68e7d34965 pvscan: fix autoactivation of exported VG
pvscan --cache -aay was activating LVs in exported VGs
when it should not.

It appears that this was a regression from commit 9b640c3684
"pvscan: use process_each_vg for autoactivate".
2016-11-02 16:29:52 -05:00
Heinz Mauelshagen
8270ff5702 lvconvert: prevent non-synced raid1 primary leg repair
(Automatic) repair may not be allowed during the initial sync of an upconverted
linear LV, because the data on the failing, primary leg hasn't been completely
synchronized to the N-1 other legs of the raid1 LV (replacing failed legs during
repair involves discontinuing access to any replaced legs data, thus preventing
data recovery on the primary leg e.g. via dd_rescue).

Even though repair would not cause data loss when adding legs to a fully synced
raid1 LV, we don't have information yet defining this state yet (e.g. a raid1
LV flag telling the fully synchronized status before any legs were added),
hence can't automatically decide to allow to repair.

If nonetheless a repair on a non-synced raid1 LVs is intended, the "--force"
option has to be provided.

Resolves: rhbz1311765
2016-10-28 15:55:10 +02:00
Heinz Mauelshagen
e118b65d65 lvconvert: check for supported raid0/raid4 segtypes
Validate kernel support for raid0/raid4 on given and
requested segtype before requesting conversions on them.

Because raid10 wasn't present in old RAID targets, add
the same validation to be prepared once we support them.
2016-10-27 16:44:32 +02:00
Heinz Mauelshagen
ff05ed7afd lvchange/vgchange/lvconvert: prevent raid4 creation/activation/conversion on non-supporting raid targets
Check for dm-raid target version with non-standard raid4 mapping expecting the dedicated
parity device in the last rather than the first slot and prohibit to create, activate or
convert to such LVs from striped/raid0* or vice-versa in order to avoid data corruption.

Add related tests to lvconvert-raid-takeover.sh

Resolves: rhbz1388962
2016-10-27 11:42:07 +02:00
Heinz Mauelshagen
e84f527cd3 lvconvert: revert to only letting raid4 through to lv_raid_convert()
Commit de78e8eae7 allowed to let any raid layout through
which we want to avoid until further validation cleanups.

Related to rhbz1386184
2016-10-26 17:54:19 +02:00
Bryn M. Reeves
021715e897 dmsetup: remove stray '\n' in delete log message 2016-10-24 17:21:35 +01:00
Bryn M. Reeves
5eda393488 dmsetup: obey --programid when deleting regions 2016-10-24 17:21:18 +01:00
Heinz Mauelshagen
de78e8eae7 lvconvert: position dedicated parity device in raid4 conversions porperly
On conversions between striped/raid0* and raid4, the kernel expects
the dedicated raid4 parity SubLVs in the first segment area rather than
in the last it's been allocated to, thus the data mapping ain't proper.

Enhance lvconvert (lib/metadata/raid_manip.c) to shift the dedicated
parity SubLVs on conversions from striped/raid0* to raid4 and vice-versa.

In case of raid0_meta -> raid4 where the MD raid0 personality already has
stored RAID array device positions in the superblocks, the MetaLVs have to
be cleared so that the kernel doesn't fail validating the array positions
after lvm has shifted them up by one.

Add more tests to lvconvert-raid-takeover.sh including one to check for
mapping flaws by converting a created raid4 with filesystem -> striped
and fsck it.

Whilst on it:
- add missing direct striped -> raid4 conversion to the takeover array
  to avoid an intermim conversion from striped -> raid0*
- clean up the takeover array
- allow lvconvert to actually call lv_raid_convert() on all takeover requests
  in order to check parameters and display messages provided by takeover
  functions rather than just "...not supported" from within lvconvert
- fix a typo

Resolves: rhbz1386148
2016-10-21 19:00:31 +02:00
Alasdair G Kergon
34da83d729 dmsetup: Produce partial output if dev disappears.
If a device disappears after obtaining the list of devices but before
processing it as a member of that list, dmsetup exits with a failure code.

Most commands still produce what output they can in these circumstances,
but 'ls --tree' and 'info -c' with fields depending on device dependencies
didn't.  Change this.
2016-10-18 18:01:52 +01:00
Zdenek Kabelac
900e899739 lvconvert: still use strcmp for now
Keep for now function logic making its decision on string content.
We need bigger patch converting all things to bit-checks later.
This needs however bigger refactoring.
So this commit reverts some changes from:
c8b6c13015
2016-10-12 11:18:23 +02:00
Heinz Mauelshagen
8859d4508a lvconvert: fix RAID SubLV --splitmirror regression
Commit 088b3d036a allowed repair on cache origin RAID LVs
and restricted lvconvert actions on RAID SubLVs to change number of mirrors, repair,
replace and type changes in order to avoid unsuitable coversions on them.

This introduced a regression prohibiting --splitmirrors on any RAID SubLVs
(e.g. of cache or thin LVs; lvconvert-{cache,thin}-raid.sh tests failing).

Fix allows split mirrors again.

Fix some indenting whilst on it.
2016-10-12 00:24:57 +02:00
Zdenek Kabelac
8f30069160 cleanup: indent 2016-10-11 13:37:43 +02:00
Zdenek Kabelac
6f576483a8 cleanup: lvconvert drop unused variable 2016-10-11 13:37:43 +02:00
Zdenek Kabelac
c8b6c13015 cleanup: use already set values
When we have already decoded arg_is_set into a local var
or already set  segment type - already use these
values instead of repeating calls and string checks.
2016-10-11 13:37:43 +02:00
Zdenek Kabelac
f4ae43934a cleanup: reorder code
Move some arg test into a single place with sort of alphabetic order
when possible to make reading easier.
2016-10-11 13:37:43 +02:00
Zdenek Kabelac
706d3ddf90 lvconvert: use _read_conversion_type
Code reodering and using same pattern for reading and validating arg
(--type in this case).
2016-10-11 13:36:51 +02:00
Zdenek Kabelac
1186cf2ad4 lvconvert: fix error value
Seems some error path where not converted to 'new' ECMD return value.
Fix them to always 'goto out'.
Also drop unneeded   'ret = 0' when ret already is 0.
2016-10-11 13:36:29 +02:00
Heinz Mauelshagen
088b3d036a lvconvert: certain repair of cache raid volumes fails "Cannot convert internal LV"
In case a RAID orig LV is being cached and fails, repair is impossible because
"lvconvert --repair" gets rejected.

Fix by allowing repair on cache orig RAID LVs and
"lvconvert --replace/--mirrors/--type {raid*|mirror|striped|linear}" as well.

Allow the same lvconvert actions on any cache pool and metadata RAID SubLVs.

Resolves: rhbz1380532
2016-10-10 17:31:29 +02:00
David Teigland
bf5d0a2651 toollib: clean up coverity issue
in processing duplicate pvs.
2016-10-04 16:25:32 -05:00
Alasdair G Kergon
c900cf7ed4 Revert "cleanup: simplier assign of cmd vars"
This reverts commit cea441f4d1.

cmd->default_values is configurable and this code should not make
any assumptions about values it holds.
2016-10-03 18:14:17 +01:00
Zdenek Kabelac
77ffd39dfb cleanup: drop test for NULL
Since lp->segtype has been already checked for not-being NULL,
drop this test so Coverity is not later confused it 'can be a NULL'.
2016-10-03 17:49:56 +02:00
Zdenek Kabelac
cea441f4d1 cleanup: simplier assign of cmd vars
Directly assign queried args as they provide matching values for
a setting.
2016-10-03 17:49:55 +02:00
Peter Rajnoha
e40fbd08c8 config: parse config tree without dup node checking if it's metadata tree 2016-09-21 18:16:05 +02:00
Peter Rajnoha
094488ffab cleanup: remove unused variables 2016-09-21 15:53:50 +02:00
Peter Rajnoha
926a565781 coverity: dmsetup: fix possible use of uninitialized value 2016-09-21 15:52:23 +02:00
Bryn M. Reeves
7ea5758c91 dmsetup: ensure --filemap histogram bounds are freed
Make sure that the temporary dm_histogram used for the bounds
argument is freed in the case that the user provided a --bounds
argument on the command line.
2016-09-21 10:09:20 +01:00
Heinz Mauelshagen
5d455b28fc lvconvert: fix (automatic) raid repair regression
The dm-raid target now rejects device rebuild requests during ongoing
resynchronization thus causing 'lvconvert --repair ...' to fail with
a kernel error message. This regresses with respect to failing automatic
repair via the dmeventd RAID plugin in case raid_fault_policy="allocate"
is configured in lvm.conf as well.

Previously allowing such repair request required cancelling the
resynchronization of any still accessible DataLVs, hence reasoning
potential data loss.

Patch allows the resynchronization of still accessible DataLVs to
finish up by rejecting any 'lvconvert --repair ...'.

It enhances the dmeventd RAID plugin to be able to automatically repair
by postponing the repair after synchronization ended.

More tests are added to lvconvert-rebuild-raid.sh to cover single
and multiple DataLV failure cases for the different RAID levels.

- resolves: rhbz1371717
2016-09-21 00:39:29 +02:00
Zdenek Kabelac
0e8449a5b9 thin: fix lvchange of discards and zero flag
Reload of thin-pool origin_only is designed to only post messages
to a thin-pool. It's not intended to be used for reload of thin-pool
table. Fix it by using standard call  'lv_update_and_reload()'.
2016-09-19 14:00:56 +02:00
Zdenek Kabelac
4b22cd81e6 cache: report metadata percentage
Reinstantiate reporting of metadata percent usage for cache volumes.
Also show the same percentage with hidden cache-pool LV.
This regression was caused by optimization for a single-ioctl in
2.02.155.
2016-09-09 15:01:35 +02:00
Brassow Jonathan
5838c41a35 cache: scrubbing for cache origin LV - Bug 1169495
Allow RAID scrubbing on cache origin sub-LV

This patch adds the ability to perform RAID scrubbing on the cache
origin sub-LV (https://bugzilla.redhat.com/1169495).  Cache origin
operations are restricted to non-clustered RAID LVs until there can
be further testing in a cluster (even for exclusive activation).

User can either specify directly _corig LV
or he can specify cache LV and operation  --syncation is
passed ONLY to   _corig LV.

If users wants to manipulation with cache-pool devices - he
needs to specify this object name.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
2016-09-07 16:42:32 +02:00
Alasdair G Kergon
be85c22f65 raid10: Fix #stripes in lvcreate msg when too many. 2016-08-30 12:04:23 +01:00
Zdenek Kabelac
b493811968 cache: introduce cache_pool_max_chunks
Introduce 'hard limit' for max number of cache chunks.
When cache target operates with too many chunks (>10e6).

When user is aware of related possible troubles he
may increase the limit in lvm.conf.

Also verbosely inform user about possible solution.

Code works for both lvcreate and lvconvert.

Lvconvert fully supports change of chunk_size when caching LV
(and validates for compatible settings).
2016-08-29 20:47:31 +02:00
Peter Rajnoha
e758d722c7 conf: fix typo in report/columns_as_rows config option name recognition
Commit e947c362dd introduced
config_settings.h file for central place to store all definitions for
config options. By mistake, it used report/colums_as_rows instead
of report/columns_as_rows (missing "n" in "columns").
2016-08-25 14:53:32 +02:00
Alasdair G Kergon
7837fbc1c1 lvconvert: Disallow raid10 mirror conversions. 2016-08-23 23:40:16 +01:00
Alasdair G Kergon
896912b14d lvcreate: Never treat raid0 as linear.
raid0 and raid0_meta require, or default to, at least 2 stripes.
2016-08-19 23:57:30 +01:00
Alasdair G Kergon
88e6abc5a0 lvconvert: Don't allow --repair on raid0 LVs. 2016-08-19 23:42:01 +01:00
Alasdair G Kergon
e192fde687 lvcreate: Drop warning messages for number of raid stripes.
It's now just setting a default, not adjusting the user's parameter.
2016-08-19 14:53:33 +01:00
Alasdair G Kergon
ea0f604e70 lvcreate: No longer adjust --stripes for raid types.
If the number of stripes requested is incompatible with the requested
type of raid, give an error instead of adjusting it.

If no stripes argument is supplied, continue to use an appropriate
default.
2016-08-19 14:19:51 +01:00
Alasdair G Kergon
c1a0a2c712 toollib: Record whether or not stripes/stripe_size args supplied. 2016-08-19 13:51:43 +01:00
Heinz Mauelshagen
c0a0eedf2e vgsplit: fix regression processing thin external origins
a579ba2ac2 fixed a regression causing a segfault if no external
origin existed but broke the logic leading to erroneous error
messages and creations of split off exported VGs in case the
external origin and the pool LVs were allocated on different PVs.

- resolves rhbz1367459
2016-08-16 23:57:09 +02:00
Heinz Mauelshagen
73df2aedf9 lvcreate: better error message creating RAID LV on < 4 KiB VG extent size
Creating a RaidLV in VGs with very small extent sizes caused
late failure in the kernel giving a not very informative error
message. Catch the attempt early and display failure message
'Unable to create RAID LV: requires minimum VG extent size 4.00 KiB'.

- resoves rhbz1179970
2016-08-16 13:39:40 +02:00
Alasdair G Kergon
114db6f745 tools: Suppress some unnecessary --stripesize warnings.
https://bugzilla.redhat.com/1366745
2016-08-15 19:38:45 +01:00
Heinz Mauelshagen
d83f2d766d pvmove: fix regression introduced with 8e9d5d12ae
'pvmove -n name pv1 pv2' called with the name of a top-level LV
failed with mentioned commit.

Enhance pvmove-raid-segtypes.sh to test for prohibited RAID SubLV moves.
2016-08-15 19:31:04 +02:00
Heinz Mauelshagen
8e9d5d12ae pvmove: prohibit non-resilient collocation of RAID SubLVs
'pvmove -n name pv1 pv2' allows to collocate multiple RAID SubLVs
on pv2 (e.g. results in collocated raidlv_rimage_0 and raidlv_rimage_1),
thus causing loss of resilence and/or performance of the RaidLV.

Fix this pvmove flaw leading to potential data loss in case of PV failure
by preventing any SubLVs from collocation on any PVs of the RaidLV.
Still allow to collocate any DataLVs of a RaidLV with their sibling MetaLVs
and vice-versa though (e.g. raidlv_rmeta_0 on pv1 may still be moved to pv2
already holding raidlv_rimage_0).

Because access to the top-level RaidLV name is needed,
promote local _top_level_lv_name() from raid_manip.c
to global top_level_lv_name().

- resolves rhbz1202497
2016-08-15 18:22:32 +02:00
Heinz Mauelshagen
a185a2bea2 lvcreate/lvconvert: fix validation of maximum mirrors/stripes
Enforce mirror/raid0/1/10/4/5/6 type specific maximum images when
creating LVs or converting them from mirror <-> raid1.

Document those maxima in the lvcreate/lvconvert man pages.

- resolves rhbz1366060
2016-08-12 19:14:28 +02:00
Peter Rajnoha
2fed8d8515 lvmcmdline: use long int for number returned by strtol 2016-08-10 09:10:37 +02:00
Peter Rajnoha
5ac008116b report: add report_reset_cmdlog_seqnum and call it for each new cmd executed in lvm shell 2016-08-09 18:49:11 +02:00
Peter Rajnoha
e8985c71bc config: add support for CFG_DISALLOW_INTERACTIVE flag to mark settings as not suitable for override in interactive mode
Some settings are not suitable for override in interactive/shell
mode because such settings may confuse the code and it may end
up with unexpected behaviour. This is because of the fact that
once we're in the interactive/shell mode, we have already applied
some settings for the shell itself and we can't override them
further because we're already using those settings to drive the
interactive/shell mode. Such settings would get ignored silently
or, in worse case, they would mess up the existing configuration.
2016-08-09 18:49:11 +02:00
Peter Rajnoha
7111d48748 lvm: shell: honor log/command_log_selection as default and reset to this value after lastlog 2016-08-09 18:49:11 +02:00
Peter Rajnoha
e805ef2d66 lvmcmdline: profile: early profile load for lvm shell
Make it possible to also load profile for lvm shell by honouring
LVM_COMMAND_PROFILE environment variable.
2016-08-09 18:49:11 +02:00
Peter Rajnoha
f21afddeb7 lvm: shell: extend log report to cover whole lvm shell's main loop
When lvm commands are executed in lvm shell, we cover the whole lvm
command execution within this shell now. That means, all messages logged
and status caught during each command execution is now recorded in the
log report, including overall command's return code.
2016-08-09 18:49:10 +02:00
Peter Rajnoha
5649834f7d lvmcmdline: return 0/NULL if cmd->arg_values not set and arg_count/grouped_arg_count/arg_value called
We may call arg_count/grouped_arg_count/arg_value soon enough that
cmd->arg_values is not set yet.

Normally, when running a command, we execute lvm_run_command which in
turn calls _process_command_line to allocate and parse the command line
values and stores them in cmd->arg_values.

However, if we run lvm shell, this one doesn't accept any command line
options and we parse the command line for each command that is executed
within the lvm shell then. If we used any code that tries to access
cmd->arg_values through any of the the arg handling functions too
early, we could end up with a segfault due to uninitialized (NULL)
cmd->arg_values.

This patch just saves extra checks in all the code where arg handling
may be called too early so that the cmd->arg_values is not set up yet.
This does not apply to any of existing code, but subsequent patches
will need that.
2016-08-09 18:24:45 +02:00
Peter Rajnoha
1fde4bf4d0 refactor: move report grouping and log reporting handles from processing_handle to cmd_context
With patches that will follow, this will make it possible to widen log
report coverage when commands are executed from lvm shell so the amount
of messages that may end up in stderr/stdout instead of log report are
minimized.
2016-08-09 18:24:45 +02:00
Peter Rajnoha
ef69934746 shell: also collect last command's return code for subsequent 'lastlog' invocation
Add new log_context=shell and with log_object_type=cmd and
log_object_name=<command_name> for command log report to collect
overall return code from last command (this is reported under
log_type=status).
2016-08-09 18:24:45 +02:00
Peter Rajnoha
06ce9b4e42 log: separate output and make it possible to use given FDs
Currently, the output is separated in 3 parts and each part can go into
a separate and user-defined file descriptor:

  - common output (stdout by default, customizable by LVM_OUT_FD environment variable)
  - error output (stderr by default, customizable by LVM_ERR_FD environment variable)
  - report output (stdout by default, customizable by LVM_REPORT_FD environment variable)

For example, each type of output goes to different output file:

  [0] fedora/~ # export LVM_REPORT_FD=3

  [0] fedora/~ # lvs fedora vg/abc 1>out 2>err 3>report

  [0] fedora/~ # cat out

  [0] fedora/~ # cat err
    Volume group "vg" not found
    Cannot process volume group vg

  [0] fedora/~ # cat report
    LV   VG     Attr       LSize   Layout     Role       CTime
    root fedora -wi-ao----  19.00g linear     public     Wed May 27 2015 08:09:21
    swap fedora -wi-ao---- 500.00m linear     public     Wed May 27 2015 08:09:21

Another example in LVM shell where the report goes to "report" file:

  [0] fedora/~ # export LVM_REPORT_FD=3
  [0] fedora/~ # lvm 3>report

  (in lvm shell)
  lvm> vgs

  (content of "report" file)
  [1] fedora/~ # cat report
    VG     #PV #LV #SN Attr   VSize  VFree
    fedora   1   2   0 wz--n- 19.49g    0

  (in lvm shell)
  lvm> lvs

  (content of "report" file)
  [1] fedora/~ # cat report
    VG     #PV #LV #SN Attr   VSize  VFree
    fedora   1   2   0 wz--n- 19.49g    0
    LV   VG     Attr       LSize   Layout     Role       CTime
    root fedora -wi-ao----  19.00g linear     public     Wed May 27 2015 08:09:21
    swap fedora -wi-ao---- 500.00m linear     public     Wed May 27 2015 08:09:21
2016-08-09 18:24:45 +02:00
Alasdair G Kergon
e5a5fd3669 lvconvert: Fix repair and replace routing. 2016-08-08 23:13:34 +01:00
Alasdair G Kergon
175e0905d5 test: Drop --mirrorlog when not a mirror. 2016-08-08 18:43:54 +01:00
David Teigland
fc93085c7a lvconvert: separate type raid to mirror
By the current division of unique operations,
converting type raid to type mirror is distinct
from converting type raid to raid.
2016-08-08 10:37:24 -05:00
Alasdair G Kergon
c55134aa48 lvconvert: Limit --corelog and --mirrorlog to mirrors.
It's an error to specify a log when the final result is not of type
mirror.
2016-08-08 14:39:55 +01:00
Heinz Mauelshagen
7d6cf12554 lvcreate: reject '--nosync' option for RAID6 LVs
The MD raid6 personality being used to drive lvm raid6 LVs does
read-modify-write updates to any stripes and thus relies on correct
P and Q Syndromes being written during initial synchronization or
it may fail reconstructing proper user data in case of SubLVs failing.

We may not allow the '--nosync' option on
creation of raid6 LVs for that reason.

Update/fix 'man lvcreate' in that regard.

add lvcreate-raid-nosync.sh test script.

- Resolves rhbz1358532
2016-08-08 13:52:35 +02:00
Peter Rajnoha
57fa5d4329 lvmcmdline: do not refresh whole cmd context if profile dropped after processing LVM cmd
We don't need to refresh whole cmd context if we drop profile after
processing LVM command - just like we don't refresh cmd context when
we're applying the profile. It's because profiles contain only safe
subset of settings which do not require complete cmd context refresh.

This patch calls process_profilable_config instead of
refresh_toolcontext if there was profile applied for the LVM
command only, not --config which requires toolcontext refresh.
The process_profilable_config just sets proper values based on
values of profilable settings, but it does not do complete
reinitialization of various parts (e.g. filters, logging etc.).
2016-08-08 11:57:13 +02:00
Alasdair G Kergon
76ef2d15d8 lvconvert: Support raid0<->raid4 and mirror<->raid1.
Only simple takeover cases so far.
2016-08-07 00:56:08 +01:00
Heinz Mauelshagen
d2c3b23e6d lvchange: Allow device specification when requesting a repair
'lvchange --resync LV' or 'lvchange --syncaction repair LV' request the
RAID layout specific parity blocks in raid4/5/6 to be recreated or the
mirrored blocks to be copied again from the master leg/copy for raid1/10,
thus not allowing a rebuild of a particular PV.

Introduce repeatable option '--[raid]rebuild PV' to allow to request
rebuilds of specific PVs in a RaidLV which are known to contain corrupt
data (e.g. rebuild a raid1 master leg).

Add test lvchange-rebuild-raid.sh to test/shell doing rebuild
variations on raid1/10 and 5; add aux function check_status_chars
to support the new test.

 - Resolves rhbz1064592
2016-08-05 16:01:46 +02:00
Alasdair G Kergon
91f866f786 raid: Tell lib whether stripesize was specified 2016-08-05 14:28:14 +01:00
David Teigland
d1a25fe597 lvconvert: add FIXME
operations are no longer identified correctly.
2016-08-04 13:01:48 -05:00
Alasdair G Kergon
4a15abe865 striped: Add precise macros for original segtype.
The existing striped macros include raid0 segments.
2016-08-04 01:24:39 +01:00
Alasdair G Kergon
5c3141a8b9 lvconvert: Improve error message when no -m. 2016-08-03 23:43:59 +01:00
Alasdair G Kergon
8b1a368b59 lvconvert: Provide entry point for new functionality.
Prepare for new segment type conversion functionality in cases that
currently fail.  In the short-term, we need to do this while limiting
the changes to the code paths for the conversions that are already
supported.
2016-08-03 03:53:29 +01:00
Alasdair G Kergon
fdc3fcbfce lvconvert: Pass region_size to lv_raid_convert. 2016-08-02 23:51:20 +01:00
Alasdair G Kergon
a234cebbed lvconvert: Preserve mirror region size with --repair. 2016-08-02 19:50:04 +01:00
Alasdair G Kergon
415c5fd5d8 lvconvert: Divide into 12 categories. 2016-08-02 16:44:21 +01:00
Alasdair G Kergon
6361bc4734 lvconvert: Treat --repair as an independent case. 2016-08-02 16:22:12 +01:00
Alasdair G Kergon
804a397643 lvconvert: Forbid stripe parameters with --repair. 2016-08-02 15:59:12 +01:00
Alasdair G Kergon
d0df1ff995 lvconvert: Set lp->segtype in only one place. 2016-07-30 18:20:04 +01:00
Alasdair G Kergon
1ce958bc5e lvconvert: Rely upon lp->thin and lp->cache. 2016-07-30 15:58:09 +01:00
Alasdair G Kergon
48d9c46daa lvconvert: Fix --type thin recognition.
lp->thin already holds the result of the cmdline arg resolution.
2016-07-30 15:08:50 +01:00
Alasdair G Kergon
b3fbcd1ff7 lvconvert: Move stripe validation code later.
Simpler to delay it all until the actual LV being changed is available,
rather than having it split in two parts.
2016-07-30 02:52:06 +01:00
Alasdair G Kergon
4ffe15bf6a tools: Unify stripesize parameter validation.
Move it all into get_stripe_params().
Some code paths missed --stripesize checks.
E.g. lvcreate --type raid4 -i1
2016-07-30 02:05:50 +01:00
Alasdair G Kergon
d01b1b6cc1 lvconvert: Rearrange code that decides segtype. 2016-07-30 00:22:13 +01:00
Alasdair G Kergon
a8e4790810 lvconvert: Only obtain --type parameter once. 2016-07-29 21:45:22 +01:00
Alasdair G Kergon
800c0d3dd6 lvconvert: Remove hard-coded segment names. 2016-07-29 21:11:12 +01:00
Alasdair G Kergon
6f47e79a88 pre-release 2016-07-28 18:36:45 +01:00
Heinz Mauelshagen
a579ba2ac2 vgsplit: ea90a3d622 added an unconditional call to lv_is_on_pvs()
on any thin snap external origin LV which caused a segfault
         when none existed as exposed by the vgsplit-thin.sh test.

         Only call lv_is_on_pvs() if an external origin LV actually
         exists and correct the related splitting logic.
2016-07-28 18:35:33 +02:00
David Teigland
ea90a3d622 vgsplit: restore check for thin pool external origin
Fix a regression from commit 4420d41f, in which the
check was skipped for splitting a thin pool and an
external origin.
2016-07-27 14:00:57 -05:00
Heinz Mauelshagen
c7b2654c25 lvcreate.c: respect DEFAULT_RAID_MAX_IMAGES on creation of any RaidLV 2016-07-27 18:20:48 +02:00
Heinz Mauelshagen
8f62b7bfe5 vg_validate: segment check enhancements for raids to catch bogus metadata
General RAID and RAID segment type specific checks are added
to merge.c. New static _check_raid_seg() is called on each segment
of a RaidLV (which have just one) from check_lv_segments().

New checks caught some unititialized segment members
which are addressed here as well:

- initialize seg->region_size to 0 in lvcreate.c for raid0/raid0_meta

- initialize list seg->origin_list in lv_manip.c
2016-07-27 18:17:29 +02:00
Zdenek Kabelac
eaf7d06a82 lvconvert: support --zero for full cache pool conversion.
Add matching support for -Z option also we doing full conversion
to cache-pool.

Extending coversion message to show which pool type is created
and whether the metadata will be wiped or remain unmodified.
2016-07-27 16:20:57 +02:00
Zdenek Kabelac
3c377f8334 lvconvert: tune cache-pool zeroing
Follow-up to 27a767d5e8.
Tunning behavior in a way we always prompt when option --zero is NOT specified.
Without -Z lvm expects user wants to 'reset' cache-pool metadata
(they could have been splitted from some cached LV)

If user doesn't want to zero metadata he needs to specify -Zn.

User may also avoid prompting for zeroing by using -Zy for
cache-pool (basically equals using --yes  without -Z being given)
(unlike full convert case, there is no cache-pool being converted,
so there is not 'uncoditional' prompt in this case).
2016-07-27 16:20:57 +02:00
Zdenek Kabelac
5636bfd83d lvconvert: suppress zeroing warning when converting to thin
When volume was lvconvert-ed to a thin-volume with external origin,
then in case thin-pool was in non-zeroing mode
it's been printing WARNING about not zeroing thin volume - but
this is wanted and expected - so nothing to warn about.

So in this particular use case WARNING needs to be suppressed.

Adding parameter support for lvcreate_params.

So now lvconvert creates 'normal thin LV' in read-only mode
(so any read will 'return 0' for a moment)
then deactivate regular thin LV and reacreate in 'final R/RW' mode
thin LV with external origin and activate again.
2016-07-27 16:20:57 +02:00
Alasdair G Kergon
d180bf6311 lvconvert: --trackchanges requires --splitmirrors 1 2016-07-25 21:15:25 +01:00
Alasdair G Kergon
1efb1c2343 lvconvert: --trackchanges requires --splitmirrors 2016-07-25 19:32:10 +01:00
David Teigland
7b1daa248f lvconvert: remove warnings about deprecated split option
A warning seems too severe for this message, so leave it
out until there's a better idea.
2016-07-25 11:01:56 -05:00
David Teigland
70bad99894 lvmlockd: improve message for lock-start
Only print this for shared VGs, and include the
time it may take for sanlock.
2016-07-25 10:43:06 -05:00
David Teigland
2c3b92b550 lvconvert: change error message
for implicit pool conversion since it's also used
when the lv is already a pool
2016-07-22 10:00:24 -05:00
Zdenek Kabelac
27a767d5e8 lvconvert: reusing old cache pool metadata needs -Zn
When cache pool is reused for a new cached volume, there is
normally no need to 'keep' old cache-pool metadata as this
could cause major data lose.

Unlike with 'lvcreate -H -LX --cachepool' conversion, this lvconvert
path left the metadata unzeroed - partly for making easier some
debugging, but this was rather a bug.

So to keep possible reattach of 'unzeroed' metadata, user
now has to use 'lvconvert -Zn' for such conversion. In this case
the prompt will appear about possibe data loss and to proceed,
user has to confirm such operation. Without -Zn metadata are wiped.
2016-07-22 14:40:26 +02:00
Heinz Mauelshagen
259f9dd718 lvcreate: conditionally set stripesize
Stripe size may not be set unconditionally in
_read_mirror_and_raid_params() or creation of
striped LV will fail
2016-07-21 02:33:28 +02:00
David Teigland
b203d5e745 lvconvert: allow implied cache pool convert
Just as with the implied thin pool convert when
given ambiguous command line options.
2016-07-20 10:44:28 -05:00
Heinz Mauelshagen
7eb7909193 lvcreate: raid0 needs default number of stripes
Commit 3928c96a37 introduced
new defaults for raid number of stripes, which may cause
backwards compatibility issues with customer scripts.

Adding configurable option 'raid_stripe_all_devices' defaulting
to '0' (i.e. off = new behaviour) to select the old behaviour
of using all PVs in the VG or those provided on the command line.

In case any scripts rely on the old behaviour, just set
'raid_strip_all_devices = 1'.

- resolves rhbz1354650
2016-07-20 17:20:15 +02:00
Zdenek Kabelac
6dc4d03508 lvconvert: enable work with partial LVs
Fix printed message and enable handling of missing PVs.
2016-07-19 17:39:41 +02:00
Bryn M. Reeves
da49d4d54e dmstats: fix bounds leak in _do_stats_create_regions() (Coverity) 2016-07-18 18:48:34 +01:00
Bryn M. Reeves
d2bf6742f8 dmstats: check uuid, major, and alldevices before argc (Coverity)
The --uuid, --major and --alldevices arguments were incorrectly tested
after confirming argc is > 0, in a branch that only executes if argc
== 0 (i.e. they were unreachable).

Move all device checks before the test for argc and log an appropriate
error before returning.
2016-07-18 18:48:34 +01:00
Bryn M. Reeves
da146ae9b9 dmstats: free bounds string in _stats_create_file() (Coverity) 2016-07-18 18:48:34 +01:00
Alasdair G Kergon
c425cdd115 Revert "lvcreate: raid0 needs default number of stripes"
This reverts commit 3928c96a37.

A new setting is required in lvm.conf to control this.
2016-07-15 21:53:37 +01:00
Alasdair G Kergon
5af311ddd8 macros: Add lv_is_not_synced. 2016-07-14 14:21:01 +01:00
Zdenek Kabelac
bbf574ab90 coverity: easier to follow set-up of vsn variable
Helping coverity to see 'vsn' really can't be NULL.
2016-07-13 21:52:14 +02:00
Heinz Mauelshagen
3928c96a37 lvcreate: raid0 needs default number of stripes
raid0/raid0_meta type LVs don't have a default number of stripes when
created without '-i/--stripes Stripes' whereas other raid types have one.

Patch sets the default for raid0/raid0_meta to 2 stripes.

The default amount of stripes for raid4/5/10 is changed to 2 and for raid6 to 3
rather than using all PVs in the VG or those provided on the command line.

This is to avoid unintended high number of stripes in case of many PVs.

To select a different amount of stripes from the default,
use 'lvcreate -i/--stripes Stripes'.

- resolves rhbz1354650
2016-07-13 21:45:49 +02:00
Heinz Mauelshagen
c77c59f3d9 lvchange: resync attempts on raid0 cause segfaults
Resync attempts on raid0/raid0_meta via 'lvchange --resync ...'
cause segfaults.

'lvchange --syncaction ...' doesn't get rejected either.

Prohibit both on raid0/raid0_meta LVs.

- resolves rhbz1354656
2016-07-12 17:23:05 +02:00
Heinz Mauelshagen
c32f96f277 vgsplit: use dm_list_next() 2016-07-12 16:25:12 +02:00
Heinz Mauelshagen
4ca55192e0 vgsplit: temporary list pointer may be invalid
4420d41fea introduced recursive split of lvs which
splits a top-level LV together with it's sub LVs.

This lead to invalid temporary list pointers
causing hangs/OOM situations.

Patch updates the temporary list pointer
referencing a moved sub LV.

- resolves rhbz1354686
2016-07-12 16:15:32 +02:00
Zdenek Kabelac
5254971418 cleanup: lvconvert display_lvname and indent updates
Use display_lvname() for printing vg/lv names.
Add some missing dots.
Some indents.
2016-07-12 13:20:20 +02:00
David Teigland
9f7e8f22dc lvconvert: remove some FIXME comments 2016-07-11 10:29:10 -05:00