1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

742 Commits

Author SHA1 Message Date
Alasdair G Kergon
438e0050df config: add silent mode
Accept -q as the short form of --quiet.
Suppress non-essential standard output if -q is given twice.
Treat log/silent in lvm.conf as equivalent to -qq.
Review all log_print messages and change some to
log_print_unless_silent.

When silent, the following commands still produce output:
dumpconfig, lvdisplay, lvmdiskscan, lvs, pvck, pvdisplay,
pvs, version, vgcfgrestore -l, vgdisplay, vgs.
[Needs checking.]

Non-essential messages are shifted from log level 4 to log level 5
for syslog and lvm2_log_fn purposes.
2012-08-25 20:35:48 +01:00
Jonathan Brassow
4047e4dfb1 RAID: Add support for RAID10
This patch adds support for RAID10.  It is not the default at this
stage.  The user needs to specify '--type raid10' if they would like
RAID10 instead of stacked mirror over stripe.
2012-08-24 15:34:19 -05:00
Zdenek Kabelac
bd67a3151a cleanup: uint64_t casts 2012-08-23 14:37:21 +02:00
Zdenek Kabelac
54c24193f5 thin: lvcreate --discards 2012-08-09 16:25:52 +02:00
Jonathan Brassow
5555d2a000 RAID: Fix segfault when attempting to replace RAID 4/5/6 device
Commit 8767435ef8 allowed RAID 4/5/6
LV to be extended properly, but introduced a regression in device
replacement - a critical component of fault tolerance.

When only 1 or 2 drives are being replaced, the 'area_count' needed
can be equal to the parity_count.  The 'area_multiple' for RAID 4/5/6
was computed as 'area_count - parity_devs', which could result in
'area_multiple' being 0.  This would ultimately lead to a division by
zero error.  Therefore, in calc_area_multiple, it is important to take
into account the number of areas that are being requested - just as
we already do in _alloc_init.
2012-07-24 19:02:06 -05:00
Jonathan Brassow
8767435ef8 RAID: Fix extending size of RAID 4/5/6 logical volumes.
Reducing a RAID 4/5/6 LV or extending it with a different number of
stripes is still not implemented.  This patch covers the "simple" case
where the LV is extended with the same number of stripes as the orginal.
2012-06-26 09:44:54 -05:00
Alasdair G Kergon
2cec4b4a77 alloc: fix raid --alloc anywhere double allocs
If _alloc_parallel_area for raid devices chooses an area already used
up, it doesn't notice that it has no space left in it and leaves
later code trying to place a zero-length area into the LV.

https://bugzilla.redhat.com/832596
2012-06-28 23:26:42 +01:00
Peter Rajnoha
a2f4ccd839 lvcreate: add --activate ay (autoactivate)
One can use "lvcreate --aay" to have the newly created volume
activated or not activated based on the activation/auto_activation_volume_list
this way.

Note: -Z/--zero is not compatible with -aay, zeroing is not used in this case!
When using lvcreate -aay, a default warning message is also issued that zeroing
is not done.
2012-06-28 09:44:07 -04:00
Alasdair G Kergon
07a25c249b discards: don't discard reconfigured extents
Update release_lv_segment_area not to discard any PV extents,
as it also gets used when moving extents between LVs.
Instead, call a new function release_and_discard_lv_segment_area() in
the two places where data should be discarded - lv_reduce() and
remove_mirrors_from_segments().
2012-06-27 22:12:01 +01:00
Alasdair G Kergon
a5ddb347e5 allocation: allow release_lv_segment_area to fail
Allow release_lv_segment_area to fail as functions it calls can fail.
2012-06-27 22:11:49 +01:00
Zdenek Kabelac
6f3cd63551 cleanup: replace memset with struct initilization
Simplifies the code, properly detects too long socket paths,
drops unused parameter.
2012-06-22 13:23:03 +02:00
Alasdair Kergon
e0ed1b458d Warn of deadlock risk when using snapshots of mirror segment type. 2012-05-14 16:18:57 +00:00
Alasdair Kergon
8b59522d67 Fix cling policy not to behave like normal policy if no previous LV seg.
Fix alloc cling to cling to PVs already found with contiguous policy.
2012-05-11 22:53:13 +00:00
Alasdair Kergon
8a689fd04d Fix allocation policy loop so it doesn't continue beyond cling using later
policies it shouldn't be using when --alloc cling is specified but no tags
are defined.
2012-05-11 22:19:12 +00:00
Alasdair Kergon
01cfbe14f1 Append _TO_LVSEG to names of internal A_CONTIGUOUS and A_CLING flags.
Remove some unnecesary prev_lvseg checks.
2012-05-11 18:59:01 +00:00
Alasdair Kergon
51514ae62f Always include debug mesg when cling to allocated is set. 2012-05-11 15:32:19 +00:00
Alasdair Kergon
086829459b Refactor _has_matching_pv_tag to provide a fn that takes PV structs. 2012-05-11 15:26:30 +00:00
Zdenek Kabelac
98f2e3d974 Fix regression in for_each_sub_lv
pool_lv is not a sub lv in terms for this function.
It has caused problem with renaming thin_volume, where it has tried to
rename pool LV as well.
2012-05-09 12:12:21 +00:00
Jonathan Earl Brassow
eb2d70293d Fix up-convert when mirror activation is controled by volume_list and tags.
When mirrors are up-converted, a transient mirror layer is put in so that
only the new devices are sync'ed.  That transient layer must carry the tags
of the original mirror LV, otherwise it will fail to activate when activation
is regulated by lvm.conf:activation/volume_list.  The conversion would then
fail.

The fix is to do exactly the same thing that is being done for linear ->
mirror converting (lib/metadata/mirror.c:_init_mirror_log()).  We copy the
tags temporarily for the new LV and remove them after the activation.
2012-05-05 02:08:46 +00:00
Jonathan Earl Brassow
1e4e9548b1 Disallow snapshots of mirror segment types.
Snapshots of RAID logical volumes are allowed (including "raid1").  However,
snapshots of "mirror" logical volumes has been disallowed due to unsolvable
issues inherent to the design.  The fact that mirroring (dm-raid1.c) must
stop all I/O as the result of a failure and wait for userspace intervention
can lead to a circular dependency if userspace is simultaneously waiting for
snapshots (on mirrors) to make an I/O update before proceeding.

Various snapshot on mirror tests have been removed as a result.
2012-05-01 19:21:24 +00:00
Zdenek Kabelac
aeaec150c0 Some more missing supposedly 64bit operations.
Avoid use 32bit math for extent_size.
2012-03-05 15:05:24 +00:00
Zdenek Kabelac
20c40a0807 Use 64bit math
Prevent 32bit overflow and resulting weird error reports when working
with TB sizes..
2012-03-05 14:12:57 +00:00
Zdenek Kabelac
01c62d8f9d Just make error message more clear
Make more obvious, the origin LV for snapshot must be active.
2012-03-04 15:57:27 +00:00
Zdenek Kabelac
f874903a35 Add stack trace for lv_reduce
Use common code call with stack trace.

TODO: maybe the release_lv_segment_area()
should be actually able to return error code to upper level.
2012-03-01 10:09:36 +00:00
Zdenek Kabelac
24ab6328f7 Wipe initial 4KiB for non-zeroed thin volumes
If the thin pool has disabled zeroing  (created with -Zn), we at least
clear initial 4KiB of such thin volume (provisions 1st block).

If lvcreate is executed with '-an' command will abort (same way like we for
normal LV - however for normal LV option -Zn may skip clearing completely,
for thin volumes this option is not supported (applies only for pools).
2012-02-29 22:08:57 +00:00
Zdenek Kabelac
0475b86268 Explicitely check list size of segments
instead of checking for NULL from last_seg and first_seg.
2012-02-28 10:08:20 +00:00
Zdenek Kabelac
219e040062 Drop backtrace after log_error
Just a minor change to not give backtrace when log_error has been just
reported.
2012-02-23 22:24:47 +00:00
Jonathan Earl Brassow
870762d8e3 Require number of stripes to be greater than parity devices in higher RAID.
Also, add some comments to code that I recently added that may be unclear
otherwise.
2012-02-23 17:36:35 +00:00
Jonathan Earl Brassow
9bdfb30720 Fix allocation code to allow replacement of single RAID 4/5/6 device.
The code fail to account for the case where we just need a single device
in a RAID 4/5/6 array.  There is no good way to tell the allocation functions
that we don't need parity devices when we are allocating just a single device.
So, I've used a bit of a hack.  If we are allocating an area_count that is <=
the parity count, then we can assume we are simply allocating a replacement
device (i.e. no need to include parity devices in the calculations).  This
should make sense in most cases.  If we need to allocate replacement devices
due to failure (or moving), we will never allocate more than the parity count;
or we would cause the array to become unusable.  If we are creating a new device,
we should always create more stripes than parity devices.
2012-02-23 03:57:23 +00:00
Jonathan Earl Brassow
0e92b70f71 *** empty log message *** 2012-02-22 17:14:38 +00:00
Zdenek Kabelac
d81498a824 Initialize dmeventd monitoring for every command
Read lvm.conf setting for monitoring for each command. So we should not
activate monitoring if the default compilation is set to monitor during
lvconvert commnads.

Patch also removes check for  clustered VG and allows to disable monitoring
for clustered VG with the assumption, the problem with monitoring and dmeventd
flag passing for INGNORE is already fixed.
2012-02-15 15:18:43 +00:00
Zdenek Kabelac
73e62cdc11 Add internal error for unsupported code paths
Patch mainly helps static analyzers to better work with code paths
lvm code should never trigger.
2012-02-13 11:25:56 +00:00
Alasdair Kergon
2a434c479d missing error mesg 2012-02-12 21:37:03 +00:00
Peter Rajnoha
5fa417a9c0 Stop processing lvextend if trying to extend a mirror that is being recovered.
Missing correct return value in lv_extend fn.
2012-02-09 15:13:42 +00:00
Zdenek Kabelac
a7e2da0585 Thin add pool_below_threshold
Test both data and metadata percent usage.
2012-02-08 13:05:38 +00:00
Zdenek Kabelac
94f88a4f14 Fix test for lv_snapshot_percent
Do not check for PERCENT_MERGE_FAILED if the lv_snapshot_percent() failed.
(test for snap_percent would be testing uninitialized value).
2012-02-08 13:02:07 +00:00
Alasdair Kergon
1368dc905a lost line 2012-02-01 02:11:43 +00:00
Alasdair Kergon
72abf1d880 Track unreserved space for all alloc policies and then permit NORMAL to place
log and data on same single PV.
2012-02-01 02:10:45 +00:00
Zdenek Kabelac
7012268499 Thin for_each_sub_lv
Adapt to scan thin dependency LVs
2012-01-26 21:39:32 +00:00
Zdenek Kabelac
9b1fe5a062 Thin clear stacked message for thin pool
Before removing thin pool LV always make sure, stacked message
for previous run are cleared - but allow to remove any
device that should have been created
(i.e. creation of snapshot failed - so the message for snapshot creation
may be replaced with delete message within unfinished transaction).

Also commit messages after lv remove - so free space is released in pool.
2012-01-25 11:27:42 +00:00
Zdenek Kabelac
c771a70882 Thin correct activation order
When the message is passed only in resume path the order needs
to be corrected.
2012-01-25 09:15:44 +00:00
Zdenek Kabelac
3dadb176ce Thin use suspend/resume_lv_origin
Use origin_only support for thin volume when thin snapshot is created.
2012-01-25 09:14:25 +00:00
Zdenek Kabelac
1dede50c85 Thin check for lv_thin_pool_percent error status
Check has been missing.
2012-01-25 09:02:35 +00:00
Zdenek Kabelac
0926438aad Thin prevent removal of its data and metadata LVs
LVs cannot be removed while there are linked to thin pool.
(Gives better error message, than validation).
2012-01-25 08:57:25 +00:00
Alasdair Kergon
3f61871f38 Caller is still entitled to reference an LV that's unlinked, so don't
tamper with struct contents.
2012-01-24 14:53:59 +00:00
Milan Broz
095d95d0a8 Properly show LV removal message.
(Fix regression in commit 6e181ba96d)
2012-01-24 14:15:52 +00:00
Alasdair Kergon
46c67b5279 Use chunk_size consistently for thin_pool within LVM. 2012-01-24 00:55:03 +00:00
Mike Snitzer
fc0f2d5031 Prompt if request is made to remove a snapshot whose "Merge failed". 2012-01-20 22:04:16 +00:00
Mike Snitzer
27e21a4adc Allow removal of an invalid snapshot that was to be merged on next activation.
Don't allow a user to merge an invalid snapshot.
2012-01-20 22:03:48 +00:00
Zdenek Kabelac
f82bddb76c Thin disable snapshot creation when pool is over the threshold.
Since snapshot needs to suspend origin - it might lead to pool userspace
deadlock (as the pool will wait for new space in case it would be overfilled,
but dmeventd would not be able to resize it, as the lvcreate operation would
have kept the VG lock.)
To minimize the risk of such scenario - we prevent to create new snapshot
in case we are over the threshold - but beware, there is still small timewindow,
so keep threshold at some reasonable level!
2012-01-19 15:39:41 +00:00
Zdenek Kabelac
53d7985fa1 Add support to keep info about creation time and host for each LV
Basic support to keep info when the LV was created.
Host and time is stored into LV mda section.

FIXME: Current version doesn't support configurable string via lvm.conf
and used fixed version strftime "%Y-%m-%d %T %z".
2012-01-19 15:31:45 +00:00
Zdenek Kabelac
d8106dfee2 Thin rename seg var pool_metadata_lv to metadata_lv
Better fits the code.
2012-01-19 15:23:50 +00:00
Zdenek Kabelac
f582793f1b Thin rename internal thin pool segment
Use matching name as kernel target - useful when function like
_percent is using this for validation.
2011-12-21 12:54:19 +00:00
Alasdair Kergon
66e5b7f53c Reinstate support for format1 snapshots, but issue deprecated warning.
I anticipate removing support for snapshots with lvm1-formatted metadata in a
future release.
2011-12-20 00:02:18 +00:00
Zdenek Kabelac
37f274ced9 Query before removing inactive snapshots
Removal of an inactive origin removes also all related snapshots.

When we now support 'old' external snapshots with thin volumes,
removal of pool will not only drop all thin volumes, but as
a consequence also all snapshots - which might be seen a bit
unexpected for the user - so add a query to confirm such action.

lvremove -f will skip the prompt.
2011-11-18 19:25:20 +00:00
Zdenek Kabelac
91e4512619 Adjusted mirror region size only for mirrors and raids
Update region_size only for mirror and raid targets.
This fixes warning messages when vg is using small
extent size like 1KiB and no mirror/raid is created,
but the user still got the message:

$> vgcreate -s 1K vg  <pvs>
$> lvcreate -L10K vg
Using reduced mirror region size of 4 sectors
2011-11-15 17:32:12 +00:00
Zdenek Kabelac
5f129d15b1 Thin update prompt message
Enhance message with info about how many thin volumes are going to
be removed with thin pool removal.
2011-11-15 17:29:52 +00:00
Zdenek Kabelac
8542953f74 Reorder AND test condition
Take the easiest condition for checking first since they must
apply all together, check local conditions first before doing
more expensive tests.
2011-11-15 17:27:41 +00:00
Zdenek Kabelac
25de8ca372 Thin supports only thin volumes as snapshot origins
It's currently of the scope to properly solve the snapshoting
of internal thin devs so prevent non-toplevel snapshots here.
2011-11-15 17:23:51 +00:00
Zdenek Kabelac
dd0c58c69b Add missing stack reporting
also remove unneeded {}
2011-11-12 22:53:23 +00:00
Zdenek Kabelac
3af072cc63 Thin use items iterator and stack reporting 2011-11-12 22:52:18 +00:00
Zdenek Kabelac
651ef6be82 Missing stack printing 2011-11-12 22:51:20 +00:00
Zdenek Kabelac
6e89eb9a52 Small comment and indent updates 2011-11-10 12:43:05 +00:00
Zdenek Kabelac
f201498f99 Thin test min thin_pool size for at least 1 chunk 2011-11-10 12:42:36 +00:00
Zdenek Kabelac
39fc633957 Thin align volume size on chunk boundary size
If the extent_size is smaller then the chunk_size we may try
to find better aligment (wasting less space).

i.e. using  4KB extent_size and  64KB chunk size will
lead to creation of 64KB aligned thin volume.
2011-11-10 12:42:15 +00:00
Zdenek Kabelac
74e53e8bc0 Thin disable pool create without activation 2011-11-10 12:39:01 +00:00
Alasdair Kergon
3da4ed712e Must not override alloc policy specified by user. 2011-11-07 13:54:54 +00:00
Zdenek Kabelac
97d7e5aedb Thin supports snapshots
Full support for thin snapshots.
Create and remove is supported.

TODO: lvconvert support is not yes available.
2011-11-07 11:03:47 +00:00
Zdenek Kabelac
87371d48cc Thin revert code for exclusive pool activation
There are no limits on thin-pool activation now.
Revert code that is no longer needed.
2011-11-07 10:58:13 +00:00
Zdenek Kabelac
83baa0b778 Thin pool allocation simplified
Support allocation of metadata from the same PV, if the VG
is build only from one PV.

As thinp is not mirror - we do not require 2 PVs
for basic thin usage as user is losing only perfomance.
2011-11-04 22:45:52 +00:00
Zdenek Kabelac
bd15208cd7 Thin add thin_pool_metadata_require_separate_pvs
Allow to set different policy for pool from mirrors.
2011-11-04 22:44:21 +00:00
Zdenek Kabelac
b8cac455bd Thin supports poolmetadatasize setting
Add option to set pool metadatasize.
For passing size parameter reuse region_size.
2011-11-04 22:43:10 +00:00
Alasdair Kergon
13dc67cda7 Add missing lvrename mirrored log recursion in for_each_sub_lv. 2011-11-04 01:31:23 +00:00
Zdenek Kabelac
9aa24bd034 Thin no device is created - so nothing to revert here 2011-11-03 15:46:51 +00:00
Zdenek Kabelac
92384bfd0b Thin using update_pool_lv
Replace detach_pool_messages with update_pool_lv.
Move creation code from to 'if' condition into 1.
Ensure creation has finished all previous message operations.
2011-11-03 14:56:20 +00:00
Zdenek Kabelac
1f5c98270d Thin code cleanup
Use iterate_items for list processing.
2011-11-03 14:36:40 +00:00
Zdenek Kabelac
7654abc26f Thin creation without activation
All thins are created with the next activation and VG is updated
without messages. Only some basic commands works.
(i.e. lvcreate -an  -V10 -T mvg/pool)
There can be some combination to confuse this system.

This functionality for snapshots is going to be interesting.
2011-10-30 22:07:38 +00:00
Zdenek Kabelac
f0df05e1dd Cleanup unsuccessfully created thin LV
If something fails during creation of thin LV remove such LV
and deactivate in case it's been already tried to activate
(i.e. thin kernel driver fails for some reason.)
2011-10-30 22:02:18 +00:00
Zdenek Kabelac
96279ac1c0 Make detach_pool_message visible for tools
Move there also vg_write and vg_commit.
2011-10-30 22:01:39 +00:00
Zdenek Kabelac
f8d46bd256 Thin cleanups
Fix/cleanup several error messages.
Remove test for seg_is_thin which could never be true there.
Replace (1<<24) with predefined constant.
2011-10-30 22:00:57 +00:00
Zdenek Kabelac
0968dfcd03 Thin support for stripe
Support stripe options to create thin data pool LV.

TODO: combine chunk size and stripe size.
2011-10-28 20:32:54 +00:00
Zdenek Kabelac
daa10ad0fd Thin pool resize support for data LV
Support for extension of pool data LV.

TODO: figure out thin volume for suspend/resume in cluster.
2011-10-28 20:31:01 +00:00
Zdenek Kabelac
e5b12b305f Thin support for lvrename
Rename pool's metadata lv _tmeta together with pool and _tdata.
2011-10-28 20:29:32 +00:00
Zdenek Kabelac
a1d5aaf725 Thin pool activation change
To ensure we properly handle LV cluster locking - explicitely do
not allow to change the availability of the thin pool that is in use
for some thin LV.

As soon as the thin volume is created the only way to activate pool
is via implicit dependency.

Ignore thinpool open count for lv/vgchange operations.
2011-10-28 20:28:00 +00:00
Zdenek Kabelac
2b71bcd0cb Improve lv_extend stack reporting
and some code cleanup with setting return value.
2011-10-28 20:23:24 +00:00
Zdenek Kabelac
c590a9cdbc Thin error messages clenaup and some indent 2011-10-28 20:19:26 +00:00
Zdenek Kabelac
dd3bb2bac3 Remove thin code from mirror/raid lv_extend 2011-10-28 20:18:32 +00:00
Zdenek Kabelac
2fa836e843 Extend virtual segment instead of adding new one
Before adding a new virtual segment to LV, check first whether
the last segment isn't already of the same type. In this case
extend last segment instead of creating the new one.

Thin volumes should have always only 1 virtual segment, but it
helps also to virtual snapshot or error segtype..
2011-10-28 20:17:55 +00:00
Zdenek Kabelac
72ff89d279 Always use vg memory pool for allocated lv segment
Remove mem pool parameter from alloc_lv_segment()
Since we should always allocate LV segment from the vg mempool.
2011-10-23 16:02:01 +00:00
Zdenek Kabelac
aef13649ea Remove old thin code from _lv_insert_empty_sublvs
Since thin is not able to use _lv_insert_empty_sublvs,
remove its appearence from this function.

Start to use extend_pool() function for desired functionality
and modify lv_extend() for this.
2011-10-22 16:48:59 +00:00
Zdenek Kabelac
dc225f58a9 Remove extra empty check
dm_list_splice handles empty list itself, no need to duplicate code.
2011-10-22 16:46:34 +00:00
Zdenek Kabelac
06b8248d63 Make move_lv_segment non-static
This function could be useful for other _manip source files.

Use dm_list manipulation function for provided functionality,
which make the code more readable and avoid touching list
internal details here.
2011-10-22 16:42:10 +00:00
Zdenek Kabelac
f0c9160df4 Store transaction_id with created thin lv
So we know the creation history and this should be useful with vgcfgrestore.
2011-10-21 11:38:35 +00:00
Zdenek Kabelac
4d925f5785 Remove double-hack for setting metadata size
Drop the second lv_extend and set 128MB directly in the first hack place.
2011-10-21 09:55:50 +00:00
Zdenek Kabelac
3bc417488d Thin pool now support chunk size as well
Use chunksize option to specify data_block_size for thin pool target.
Drop low_water_mark to zero.
2011-10-21 09:55:07 +00:00
Zdenek Kabelac
22f40c4efe Ensure right activation order
Couple FIXMEs put into the code for parts of the code which may be
improved later, since we might be able to add 'lazy' device creation later.
For now require exclusive activation.
2011-10-20 10:35:14 +00:00
Zdenek Kabelac
97d0f72c92 Just indent changes
Some tabs & spaces.
2011-10-19 16:36:39 +00:00
Zdenek Kabelac
a25434a3a3 Message support for thin provisiong
lvm part of messaging.

Each message is now stored it's own thin pool section:

message1 {
	create = lv
}

Messages are queued to thin pool dm target when this target
is going to be resumed or used through some dependency.

Currently  'delete' message are purely queued and processed
with next thin pool resume operation (i.e. create_thin).

WARNING - thin provisioning support is developmental code.
2011-10-17 14:17:09 +00:00
Jonathan Earl Brassow
a80192b6a7 Allow 'nosync' extension of mirrors.
This patch allows a mirror to be extended without an initial resync of the
extended portion.  It compliments the existing '--nosync' option to lvcreate.
This action can be done implicitly if the mirror was created with the '--nosync'
option, or explicitly if the '--nosync' option is used when extending the device.

Here are the operational criteria:
1) A mirror created with '--nosync' should extend with 'nosync' implicitly
[EXAMPLE]# lvs vg; lvextend -L +5G vg/lv ; lvs vg
  LV   VG   Attr     LSize Pool Origin Snap%  Move Log     Copy%  Convert
  lv   vg   Mwi-a-m- 5.00g                         lv_mlog 100.00
  Extending 2 mirror images.
  Extending logical volume lv to 10.00 GiB
  Logical volume lv successfully resized
  LV   VG   Attr     LSize  Pool Origin Snap%  Move Log     Copy%  Convert
  lv   vg   Mwi-a-m- 10.00g                         lv_mlog 100.00

2) The 'M' attribute ('M' signifies a mirror created with '--nosync', while 'm'
signifies a mirror created w/o '--nosync') must be preserved when extending a
mirror created with '--nosync'.  See #1 for example of 'M' attribute.

3) A mirror created without '--nosync' should extend with 'nosync' only when
'--nosync' is explicitly used when extending.
[EXAMPLE]# lvs vg; lvextend -L +5G vg/lv; lvs vg
  LV   VG   Attr     LSize  Pool Origin Snap%  Move Log     Copy%  Convert
  lv   vg   mwi-a-m- 20.00m                         lv_mlog 100.00
  Extending 2 mirror images.
  Extending logical volume lv to 5.02 GiB
  Logical volume lv successfully resized
  LV   VG   Attr     LSize Pool Origin Snap%  Move Log     Copy%  Convert
  lv   vg   mwi-a-m- 5.02g                         lv_mlog   0.39
vs.
[EXAMPLE]# lvs vg; lvextend -L +5G vg/lv --nosync; lvs vg
  LV   VG   Attr     LSize  Pool Origin Snap%  Move Log     Copy%  Convert
  lv   vg   mwi-a-m- 20.00m                         lv_mlog 100.00
  Extending 2 mirror images.
  Extending logical volume lv to 5.02 GiB
  Logical volume lv successfully resized
  LV   VG   Attr     LSize Pool Origin Snap%  Move Log     Copy%  Convert
  lv   vg   Mwi-a-m- 5.02g                         lv_mlog 100.00

4) The 'm' attribute must change to 'M' when extending a mirror created without
'--nosync' is extended with the '--nosync' option.  (See #3 examples above.)

5) An inactive mirror's sync percent cannot be determined definitively, so it
must not be allowed to skip resync.  Instead, the extend should ask the user if
they want to extend while performing a resync.
[EXAMPLE]# lvchange -an vg/lv
[EXAMPLE]# lvextend -L +5G vg/lv
  Extending 2 mirror images.
  Extending logical volume lv to 10.00 GiB
  vg/lv is not active.  Unable to get sync percent.
Do full resync of extended portion of vg/lv?  [y/n]: y
  Logical volume lv successfully resized

6) A mirror that is performing recovery (as opposed to an initial sync) - like
after a failure - is not allowed to extend with either an implicit or
explicit nosync option.  [You can simulate this with a 'corelog' mirror because
when it is reactivated, it must be recovered every time.]
[EXAMPLE]# lvcreate -m1 -L 5G -n lv vg --nosync --corelog
  WARNING: New mirror won't be synchronised. Don't read what you didn't write!
  Logical volume "lv" created
[EXAMPLE]# lvs vg
  LV   VG   Attr     LSize Pool Origin Snap%  Move Log Copy%  Convert
  lv   vg   Mwi-a-m- 5.00g                             100.00
[EXAMPLE]# lvchange -an vg/lv; lvchange -ay vg/lv; lvs vg
  LV   VG   Attr     LSize Pool Origin Snap%  Move Log Copy%  Convert
  lv   vg   Mwi-a-m- 5.00g                               0.08
[EXAMPLE]# lvextend -L +5G vg/lv
  Extending 2 mirror images.
  Extending logical volume lv to 10.00 GiB
  vg/lv cannot be extended while it is recovering.

7) If 'no' is selected in #5 or if the condition in #6 is hit, it should not
result in the mirror being resized or the 'm/M' attribute being changed.


NOTE:  A mirror created with '--nosync' behaves differently than one created
without it when performing an extension.  The former cannot be extended when
the mirror is recovering (unless in-active), while the latter can.  This is
a reasonable thing to do since recovery of a mirror doesn't take long (at
least in the case of an on-disk log) and it would cause far more time in
degraded mode if the extension w/o '--nosync' was allowed.  It might be
reasonable to add the ability to force the operation in the future.  This
should /not/ force a nosync extension, but rather force a sync'ed extension.
IOW, the user would be saying, "Yes, yes... I know recovery won't take long
and that I'll be adding significantly to the time spent in degraded mode, but
I need the extra space right now!".
2011-10-06 15:32:26 +00:00
Zdenek Kabelac
04a4715cb8 Add code to activate thin target
Code to zero pool metadata lv when pool is created.
Add code to create thin target via message sending.

(Revert is missing)
2011-10-03 18:43:39 +00:00
Zdenek Kabelac
aebf2d5cdc Add experimental code for activation of thinp targets
No dm messages yes - just a base functionality in the steps of other targets.
For now usable only for debugging and tracing.
2011-09-29 08:56:38 +00:00
Alasdair Kergon
1c26860d82 Abort if _finish_pvmove suspend_lvs fails instead of cleaning up incompletely.
Change suspend_lvs to call vg_revert internally.
Change vg_revert to void and remove superfluous calls after failed vg_commit.
2011-09-27 17:09:42 +00:00
Peter Rajnoha
125712bea0 Replace open_count check with holders/mounted_fs check on lvremove path.
Before, we used to display "Can't remove open logical volume" which was
generic. There 3 possibilities of how a device could be opened:
  - used by another device
  - having a filesystem on that device which is mounted
  - opened directly by an application

With the help of sysfs info, we can distinguish the first two situations.
The third one will be subject to "remove retry" logic - if it's opened
quickly (e.g. a parallel scan from within a udev rule run), this will
finish quickly and we can remove it once it has finished. If it's a
legitimate application that keeps the device opened, we'll do our best
to remove the device, but we will fail finally after a few retries.
2011-09-22 17:33:50 +00:00
Jonathan Earl Brassow
eb607100ef Fix Bug 738832 - core to disk log conversion fails with internal error
This bug showed up when trying to add a log to a mirror whose images are on
multiple devices.  This is an intra-release regression and no WHATS_NEW
entry will be added.  The error was introduce in the following commit:
	2d8a2f35c7

The solution is to recognise in _alloc_init that if there are no mirrors
or stripes specified, then 'new_extents' should be zero.
2011-09-16 18:39:03 +00:00
Zdenek Kabelac
a6d50bef2f Remove thin volumes before thin pools
When user wants to remove thin pool - check if there are no thin volumes using it.
If so - query before removal (or -ff for no question) and remove them first.
2011-09-16 12:12:51 +00:00
Zdenek Kabelac
4a0c6df8df Reset LV status when unlinking LV from VG
When LV is unlinked, we want to catch problem in vg_validate,
that LV has changed.

i.e. catch LV has been removed and is no long thin_pool while still
being referenced by some thin volume.
2011-09-16 11:59:22 +00:00
Petr Rockai
fd7d4adc57 Fix the divisibility check in the allocator for the mirror+stripe case (require
divisibility by stripe count alone, not by (mirror*stripe)).
2011-09-16 09:59:42 +00:00
Milan Broz
c81a322337 Activate virtual snapshot origin exclusively (only on local node in cluster). 2011-09-14 14:20:16 +00:00
Jonathan Earl Brassow
c94c47abd7 Fix for bug 737200 - Can't create mirrored-log mirror on a VG with small extents
Kernel requires a mirror to be at least 1 region large.  So,
if our mirror log is itself a mirror, it must be at least
1 region large.  This restriction may not be necessary for
non-mirrored logs, but we apply the rule anyway.

(The other option is to make the region size of the log
mirror smaller than the mirror it is acting as a log for,
but that really complicates things.  It's much easier to
keep the region_size the same for both.)
2011-09-13 18:42:57 +00:00
Alasdair Kergon
ef78ebf35a lvcreate/remove thin_pool and thin volumes (--driverloaded n only) 2011-09-08 16:41:18 +00:00
Alasdair Kergon
bb6f9b10db pool attach fns & more field renaming 2011-09-06 22:43:56 +00:00
Alasdair Kergon
b88362ff95 add thin_manip.c like the other manip files
move basic lv_is_* to macros
data_lv -> pool_lv - we decided to call it 'pool' everywhere now
2011-09-06 19:25:42 +00:00
Alasdair Kergon
2ef5b7cca6 Start using 64-bit status flags - most of the code already handles them.
tdata -> tpool
remove commented out definitions from metadata.h
formatting clean-ups
2011-09-06 18:49:31 +00:00
Alasdair Kergon
dd44cccefe else 2011-09-06 15:39:46 +00:00
Alasdair Kergon
9ac61d2ba2 lvcreate parsing for thin provisioning.
The rest is incomplete so this isn't usable yet.
2011-09-06 00:26:42 +00:00
Petr Rockai
e59e2f7c3c Move the core of the lib/config/config.c functionality into libdevmapper,
leaving behind the LVM-specific parts of the code (convenience wrappers that
handle `struct device` and `struct cmd_context`, basically). A number of
functions have been renamed (in addition to getting a dm_ prefix) -- namely,
all of the config interface now has a dm_config_ prefix.
2011-08-30 14:55:15 +00:00
Alasdair Kergon
c31d14d786 Remove incorrect error message added in 2.02.87. 2011-08-19 22:55:07 +00:00
Alasdair Kergon
ba7df3de88 avoid multi-line calc with incorrect intermediate var contents 2011-08-19 16:41:26 +00:00
Jonathan Earl Brassow
f439e65b64 Add support for m-way to n-way up-convert in RAID1 (no linear to n-way yet)
This patch adds the ability to upconvert a raid1 array - say from 2-way to
3-way.  It does not yet support upconverting linear to n-way.

The 'raid' device-mapper target allows for individual components (images) of
an array to be specified for rebuild.  This mechanism is used when adding
new images to the array so that the new images can be resync'ed while the
rest of the images in the array can remain 'in-sync'.  (There is no
mirror-on-mirror layering required.)
2011-08-18 19:41:21 +00:00
Jonathan Earl Brassow
2100c90dd7 Add missing checks for function return codes.
Some functions were being called without having their return values checked.
2011-08-11 19:38:00 +00:00
Jonathan Earl Brassow
66d9675559 Fix renaming of RAID logical volumes.
The function 'for_each_sub_lv', which rename uses, was not handling the
RAID metadata areas.  Thus, the metadata LVs were not being renamed.
2011-08-11 03:29:51 +00:00
Jonathan Earl Brassow
e01bcc6884 Fix compiler warning.
Compiler complaining that meta_lv could be used uninitialized.  (Not true
because it is protected by 'clear_metadata'.)  I switched to using 'lv->vg',
as it makes no difference to vg_[write|commit].
2011-08-10 16:44:17 +00:00
Peter Rajnoha
0127a9a525 Remove unused 'origin' variable in lv_remove_single function. 2011-08-05 09:21:13 +00:00
Jonathan Earl Brassow
cac52ca4ce Add basic RAID segment type(s) support.
Implementation described in doc/lvm2-raid.txt.

Basic support includes:
- ability to create RAID 1/4/5/6 arrays
- ability to delete RAID arrays
- ability to display RAID arrays
Notable missing features (not included in this patch):
- ability to clean-up/repair failures
- ability to convert RAID segment types
- ability to monitor RAID segment types
2011-08-02 22:07:20 +00:00
Jonathan Earl Brassow
7411a44871 Remove and unneeded parameter from build_parallel_areas_from_lv() 2011-07-19 16:37:42 +00:00
Alasdair Kergon
ee840ff14c Move snapshot deactivation logic into lib/activate, fixing the
teardown sequence.  (Previously the snapshot was deactivated while its
origin was active and before its removal was committed to disk, so
restarting after a crash at the point would leave corruption.)
2011-07-08 12:48:41 +00:00
Alasdair Kergon
0f2a4ca2b5 When suspending, automatically preload newly-visible existing LVs
Let's find out if this makes things better or worse overall...
2011-06-30 18:25:18 +00:00
Alasdair Kergon
1d7649f36b Reinstate correct permissions when creating mirrors. 2011-06-29 17:05:53 +00:00
Jonathan Earl Brassow
9e0edb7ee5 Fix to preserve exclusive activation of mirror while up-converting.
When an LVM mirror is up-converted (an additional image added), it creates
a temporary mirror stack.  The lower-level mirror in the stack that is
created was not being activated exclusively - violating the exclusive nature
of the original mirror.  We now check for exclusive activation of a mirror
before converting it, and if found, we ensure that the temporary mirror
is also exclusively activated.
2011-06-23 14:00:58 +00:00
Milan Broz
6adbb95b82 Fail allocation if number of extents not divisible by area count
Allocation should fail early if this condition is not met.

Quick fix for https://bugzilla.redhat.com/show_bug.cgi?id=707779
2011-06-23 10:53:24 +00:00
Alasdair Kergon
7df72b3c88 Fix last snapshot removal to avoid table reload while a device is suspended. 2011-06-13 22:28:04 +00:00
Alasdair Kergon
df390f1799 Major pvmove fix to issue ioctls in the correct order when multiple LVs
are affected by the move.  (Currently it's possible for I/O to become
trapped between suspended devices amongst other problems.

The current fix was selected so as to minimise the testing surface.  I
hope eventually to replace it with a cleaner one that extends the
deptree code.

Some lvconvert scenarios still suffer from related problems.
2011-06-11 00:03:06 +00:00
Alasdair Kergon
bb056af3c9 missing space in mesg 2011-06-06 12:08:42 +00:00
Alasdair Kergon
453cdee51c Permit --available with lvcreate so non-snapshot LVs need not be activated. 2011-06-01 19:21:03 +00:00
Zdenek Kabelac
c67d2b4dd4 Fix incorrect tests for dm_snprintf() failure
As the memory is preallocated based on arg size in these cases,
the error would be quite hard to trigger here anyway.
2011-04-09 19:05:23 +00:00
Zdenek Kabelac
a1eba521e3 Fix some unmatching sign comparation gcc warnings
Simple replacement for unsigned type - usually in for() loops.
2011-04-08 14:40:18 +00:00
Jonathan Earl Brassow
532e6c8ae3 Thanks to Zdenek Kabelac (kabi) for pointing out that I was using
dm_pool_free incorrectly.  This check-in fixes that incorrect usage.

I've also added a WHATS_NEW line to reflect the changes I made to allow
lv_extend to operate on 0 length intrinsically layered LVs (i.e mirrors
and RAID).  I forgot that in the last commit.
2011-04-07 21:49:29 +00:00
Jonathan Earl Brassow
fe93c99ad9 This patch adds the ability to extend 0 length layered LVs. This
allows us to allocate all images of a mirror (or RAID array) at one
time during create.

The current mirror implementation still requires a separate allocation
for the log, however.
2011-04-06 21:32:20 +00:00
Zdenek Kabelac
f77736cab5 Remove double braces
Clang gives notice about possible confusion as commonly double bracces are
used when some assignment is done inside them.
2011-03-29 20:19:03 +00:00
Jonathan Earl Brassow
60c10a45ce s/MIRROR_NOTSYNCED/LV_NOTSYNCED/ - Flag will may refer to more than just mirrors 2011-03-29 12:51:57 +00:00
Jonathan Earl Brassow
be226be635 Fix unhandled condition in _move_lv_segments
If _move_lv_segments is passed a 'lv_from' that does not yet
have any segments, it will screw things up because the code
that does the segment copy assumes there is at least one
segment.  See copy code here:
        lv_to->segments = lv_from->segments;
        lv_to->segments.n->p = &lv_to->segments;
        lv_to->segments.p->n = &lv_to->segments;

If 'segments' is an empty list, the first statement copies over
the values, but the next two reset those values to point to the
other LV's list structure.  'lv_to' now appears to have one
segment, but it is really an ill-set pointer.
2011-03-25 22:02:27 +00:00
Zdenek Kabelac
36653e8903 Add fall through comments
Add comments to switch case construct.
2011-02-28 19:53:03 +00:00
Alasdair Kergon
1a52fa6858 Fix check for log-only allocation in new alloc normal loop. 2011-02-27 01:16:52 +00:00
Alasdair Kergon
92ffcda183 Various changes to the allocation algorithms: Expect some fallout.
There is a lot to test.

Two new config settings added that are intended to make the code behave
closely to the way it did before - worth a try if you find problems.
2011-02-27 00:38:31 +00:00
Zdenek Kabelac
aec2115410 Const fixing
Fixing some const warnings - with API change in:

int vg_extend(struct volume_group *vg, int pv_count, const char *const *pv_names,

Change is needed - as lvm2api expects const behaviour here.
So vg_extend() is doing local strdup for unescaping.

skip_dev_dir return const char* from const char* vg_name.

Rest of the patch is cleanup of related warnings.

Also using dm_report_filed_string() API change to simplify
casting in _string_disp and _lvname_disp.
2011-02-18 14:47:28 +00:00
Jonathan Earl Brassow
27ff8813da Allow snapshots in a cluster as long as they are exclusively
activated.

In order to achieve this, we need to be able to query whether
the origin is active exclusively (a condition of being able to
add an exclusive snapshot).

Once we are able to query the exclusive activation of an LV, we
can safely create/activate the snapshot.

A change to 'hold_lock' was also made so that a request to aquire
a WRITE lock did not replace an EX lock, which is already a form
of write lock.
2011-02-04 20:30:17 +00:00
Mike Snitzer
3e3591904b Improve lvcreate "insufficient extents" errors to "insufficient free space". 2011-01-28 02:58:00 +00:00
Alasdair Kergon
cef065f63f Fix lvchange --test to exit cleanly. 2011-01-24 14:19:05 +00:00
Alasdair Kergon
a8de276520 Replace fs_unlock by sync_local_dev_names to notify local clvmd. (2.02.80)
Introduce sync_local_dev_names and CLVMD_CMD_SYNC_NAMES to issue fs_unlock.
2011-01-12 20:42:50 +00:00
Jonathan Earl Brassow
025e69a15a Add disk to mirrored log type conversion. 2011-01-11 17:05:08 +00:00
Zdenek Kabelac
937a21f0d2 Speedup consequent activation calls
Stop calling fs_unlock() from lv_de/activate().
Start using internal lvm fs cookie for dm_tree.
Stop directly calling dm_udev_wait() and
dm_tree_set/get_cookie() from activate code -
it's now called through fs_unlock() function.

Add lvm_do_fs_unlock()

Call fs_unlock() when unlocking vg where implicit unlock solves the
problem also for cluster - thus no extra command for clustering
environment is required - only lvm_do_fs_unlock() function is added
to call lvm's fs_unlock() while holding lvm_lock mutex in clvmd.

Add fs_unlock() also to set_lv() so the command waits until devices
are ready for regular open (i.e. wiping its begining).

Move fs_unlock() prototype to activation.h to keep fs.h private
in lib/activate dir and not expose other functions from this header.
2011-01-10 14:02:30 +00:00
Zdenek Kabelac
b7149bbe45 Add missing test for reallocation error. 2010-12-20 14:38:22 +00:00
Zdenek Kabelac
760d1fac55 Add more strict const pointers around config tree
To have better control were the config tree could be modified use more
const pointers and very carefully downcast them back to non-const
(for config tree merge).
2010-12-20 13:12:55 +00:00
Zdenek Kabelac
166597d998 Add backtraces for errors
Add stack;  backtraces when error is reported from dev_set() or
dev_close_immediate().
2010-12-01 12:56:39 +00:00
Alasdair Kergon
f8452d8cfd Support repetition of --addtag and --deltag arguments.
Add infrastructure for specific cmdline arguments to be repeated in groups.
Split the_args cmdline arguments and values into arg_props and arg_values.
2010-11-11 17:29:05 +00:00
Zdenek Kabelac
64dff85ce4 Preserve const for char pointer
Keep char pointers 'const'  (introduced with cling commit).
2010-11-11 12:32:33 +00:00
Alasdair Kergon
eb82bd0525 Extend cling allocation policy to recognise PV tags (cling_by_tags).
Add allocation/cling_tag_list to lvm.conf.
2010-11-09 12:34:40 +00:00
Peter Rajnoha
f7e3a19f75 Clarify error messages when activation fails due to activation filter use. 2010-11-05 18:18:11 +00:00
Jonathan Earl Brassow
2c33c8b80c Fix for bug 637936: killing both redundant logs causes deadlock
Problem:
When both legs of a mirrored log fail, neither the log nor the parent
mirror can proceed.  The repair code must be careful to replace the
log with an error target before operating on the parent - otherwise,
the parent can get stuck trying to suspend because it can't push through
any writes.  The steps to replace the log device with an error target
were incomplete and resulted in the replacement not happening at all!

The code originally had all the necessary logic to complete the
replacement task, but was pulled out in a effort to clean-up that
section of code, while fixing another bug:
<offending commit msg>
In addition, I added following three changes.

- Removed tmp_orphan_lvs handling procedure
  It seems that _delete_lv() can handle detached_log_lv properly
  without adding mirror legs in mirrored log to tmp_orphan_lvs.
  Therefore, I removed the procedure.

- Removed vg_write()/vg_commit()
  Metadata is saved by vg_write()/vg_commit() just after detached_log_lv
  is handled. Therefore, I removed vg_write()/vg_commit().
</offending commit msg>

http://sources.redhat.com/cgi-bin/cvsweb.cgi/LVM2/lib/metadata/mirror.c?cvsroot=lvm2&f=h#rev1.130

I've reverted the "clean-up" changes associated with that fix, but not what
that commit was actually fixing.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Reviewed-by: Petr Rockai <prockai@redhat.com>
2010-10-14 20:03:12 +00:00
Petr Rockai
042312952c Give correct error message when creating a too-small snapshot (BZ 587063) 2010-10-13 13:52:53 +00:00
Alasdair Kergon
2d6fcbf67d Allow internal suspend and resume of origin without its snapshots. 2010-08-17 16:25:32 +00:00
Alasdair Kergon
08f1ddea6c Use __attribute__ consistently throughout. 2010-07-09 15:34:40 +00:00
Zdenek Kabelac
8fea97b7e7 Replicator: base lvm2 support
Adding configure.in support for Replicators.
Adding basic lib lvm support for Replicators.
Adding flags REPLICATOR and REPLICATOR_LOG.
Adding segments SEG_REPLICATOR and SEG_REPLICATOR_DEV.
Adding basic methods for handling replicator metadata.
2010-05-21 12:36:30 +00:00
Mike Snitzer
60267bdce8 Disallow the direct removal of a merging snapshot.
Allow lv_remove_with_dependencies() to know the top-level LV that was
requested to be removed (otherwise it recurses and we lose context).

A merging snapshot cannot be removed directly but the associated origin
can be.  Disallow removal of a merging snapshot unless the associated
origin is also being removed.
2010-04-23 19:27:10 +00:00
Alasdair Kergon
1485ce69c4 Permit mimage LVs to be striped in lvcreate and lvresize. 2010-04-09 01:00:10 +00:00
Alasdair Kergon
4d0e07a799 missing ?: 2010-04-08 00:56:26 +00:00
Alasdair Kergon
b3302a0c3c suppress bogus compiler warning 2010-04-08 00:52:41 +00:00
Alasdair Kergon
aab7a3978b Fix pvmove allocation to take existing parallel stripes into account.
When moving parts of striped LVs, pvmove wouldn't care about leaving you with
two stripes on the same disk.  Now --alloc anywhere is needed for that.
(Tried and gave up on two alternative approaches before the one committed here.)
2010-04-08 00:28:57 +00:00
Alasdair Kergon
d27c8b5660 remove compiler warning 2010-04-02 01:35:34 +00:00
Alasdair Kergon
abb9fb8370 Try to fix tracking of whether or not log extents need allocating. 2010-04-01 13:58:13 +00:00
Alasdair Kergon
e7159c828b initialise log_allocated to 0 2010-04-01 12:29:07 +00:00
Alasdair Kergon
258db3ad8e Change most remaining log_error WARNING messages to log_warn. 2010-04-01 10:34:09 +00:00
Alasdair Kergon
bce2869d92 Attempt to fix non-ALLOC_ANYWHERE allocation code after recent changes broke
The preference given to the PVs with the largest free areas.
2010-03-31 20:26:04 +00:00
Milan Broz
6733116a19 Fix all segments memory is allocated from vg private mempool.
Physical segments were still allocated from global
command context mempool.

This leads to very high memory usage when
activating large VG (vgchange).
(Memory usage was about 2G when >3000LVs).

Fix it by properly using vg->vgmem private pool,
so all the memory is released early.

New memory pool parameter is needed here for pv_split_segment
function.

Also fix the same problem in some minor allocations
(vg description, lv segment split).
2010-03-31 17:23:18 +00:00
Alasdair Kergon
1dee5eb625 Fix --alloc contiguous policy only to allocate one set of parallel areas. 2010-03-29 17:59:46 +00:00
Jonathan Earl Brassow
7a369d3704 Add ability to create mirrored logs for mirror LVs.
This check-in enables the 'mirrored' log type.  It can be specified
by using the '--mirrorlog' option as follows:
#> lvcreate -m1 --mirrorlog mirrored -L 5G -n lv vg

I've also included a couple updates to the testsuite.  These updates
include tests for the new log type, and some fixes to some of the
*lvconvert* tests.
2010-03-26 22:15:43 +00:00
Alasdair Kergon
2abbc07f3c Allow ALLOC_ANYWHERE to split contiguous areas. 2010-03-25 21:19:26 +00:00
Alasdair Kergon
a7ca334681 Add some assertions to allocation code. 2010-03-25 18:16:54 +00:00
Alasdair Kergon
f4cea344b1 improve a few comments in last check-in 2010-03-25 02:40:09 +00:00
Alasdair Kergon
8d6722c8ad Introduce pv_area_used into allocation algorithm and add debug messages.
This is the next preparatory step towards better --alloc anywhere
support and is not intended to break anything that currently works so
please report any problems - segfaults, bogus data in the new debug
messages, or if the code now chooses bizarre allocation layouts.
2010-03-25 02:31:48 +00:00
Mike Snitzer
a6bc975a24 Improve activation monitoring option processing
. Add "monitoring" option to "activation" section of lvm.conf
. Have clvmd consult the lvm.conf "activation/monitoring" too.
. Introduce toollib.c:get_activation_monitoring_mode().
. Error out when both --monitor and --ignoremonitoring are provided.
. Add --monitor and --ignoremonitoring support to lvcreate.  Update
  lvcreate man page accordingly.
. Clarify that '--monitor' controls the start and stop of monitoring in
  the {vg,lv}change man pages.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2010-03-23 22:30:18 +00:00
Alasdair Kergon
36f9d53b60 Allow dynamic extension of array of areas selected as allocation candidates. 2010-03-23 15:07:55 +00:00
Alasdair Kergon
16d9293bd7 Extend core allocation code in preparation for mirrored log areas. 2010-03-01 20:00:20 +00:00
Mike Snitzer
4bdebfd151 Do not reload origin again in lv_remove_single() if it had a merging
snapshot.  vg_remove_snapshot() will have already performed the required
reload.
2010-02-17 23:36:45 +00:00
Mike Snitzer
a5ec3e3827 Refactor snapshot-merge deptree and device removal to support info-by-uuid
Add a merging snapshot to the deptree, using the "error" target, rather
than avoid adding it entirely.  This allows proper cleanup of the -cow
device without having to rename the -cow to use the origin's name as a
prefix.

Move the preloading of the origin LV, after a merge, from
lv_remove_single() to vg_remove_snapshot().  Having vg_remove_snapshot()
preload the origin allows the -cow device to be released so that it can
be removed via deactivate_lv().  lv_remove_single()'s deactivate_lv()
reliably removes the -cow device because the associated snapshot LV,
that is to be removed when a snapshot-merge completes, is always added
to the deptree (and kernel -- via "error" target).

Now when the snapshot LV is removed both the -cow and -real devices
get removed using uuid rather than device name.  This paves the way
for us to switch over to info-by-uuid queries.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2010-02-17 22:59:46 +00:00
Mike Snitzer
dfcb905db0 Preload the origin prior to suspend IFF snapshot(s) still exist after a
merge completes.  This narrows the scope of this "hack" (which still
needs a proper fix within the deptree).

This stops dmeventd from trying to access snapshot devices that were
already removed.
2010-01-20 21:53:10 +00:00
Alasdair Kergon
8dc351e8d4 Note some problems still to be addressed. 2010-01-14 14:39:57 +00:00
Zdenek Kabelac
fc28b13c7d Cleanup const compiler warning 2010-01-14 10:17:12 +00:00
Zdenek Kabelac
4269e36315 Move initialization of the 'cmd' member of the struct alloc_handle
before the first potentional return.
2010-01-14 10:09:42 +00:00
Zdenek Kabelac
5f31bc7926 lvol%d is generated for NULL name in lv_create_empty().
So just avoid code duplication.
2010-01-14 10:08:03 +00:00
Mike Snitzer
c52678ee9b Rename segment and lv status flag from SNAPSHOT_MERGE to MERGING.
Eliminate 'merging_snapshot' from 'struct logical_volume' and just use
'snapshot' for origin lv's reference to the merging snapshot; also set
MERGING in the origin lv's status.
2010-01-13 01:56:18 +00:00
Mike Snitzer
c79b425135 Add snapshot merge wrappers to abstract the associations and flags used
to represent merging origin and snapshot volumes.
2010-01-13 01:55:43 +00:00
Mike Snitzer
28c3f0354a When turning merging origin into non-merging origin, there is bad sequence:
snapshots are suspended, new origin is created, snapshots are resumed, new
origin is resumed.  So it allocates memory while suspended.

To fix it, move vg_commit after suspend_lv, so that the suspend code will
treat it as precommitted vg and will preload new origin prior to suspend.

NOTE: agk doesn't like this "hack"; need to revisit and fix
2010-01-13 01:52:58 +00:00
Mike Snitzer
3a8d01b6e1 Reload origin if merging has stopped. 2010-01-13 01:51:45 +00:00
Mike Snitzer
68e8f5a4a2 Add 'SNAPSHOT_MERGE' lv_segment 'status' flag.
Make 'merging_snapshot' pointer that points from the origin to the
segment that represents the merging snapshot.

Import/export 'merging_store' metadata.

Do not allow creating snapshots while another snapshot is merging.
Snapshot created in this state would certainly contain invalid data.

NOTE: patches at the end of this series will remove 'merging_snapshot'
and will introduce helpful wrappers and cleanups.
2010-01-13 01:35:49 +00:00
Alasdair Kergon
109e6334b0 Fix allocation code not to stop at the first area of a PV that fits.
This spurious 'break' has been here since this code was first committed
in June 2005 and stopped the algorithm behaving as described in the
comment above it and rendered the variable 'already_found_one' useless.
2010-01-12 20:53:20 +00:00
Alasdair Kergon
f3ac7d1b82 Revert so-called "redundant" log until after next release. 2010-01-12 14:00:51 +00:00
Jonathan Earl Brassow
673421ffc2 Testsuite updates and fixes for recently added features.
1. Found bug in 'redundant log' implementation that caused
   problems when converting a linear that spanned multiple
   devices to a mirror (wasn't checking for NULL value of
   provided parameter in _alloc_parallel_area)

2. Testsuite was failing to perform tests when 'not' modifier
   was used.  This allowed a couple issues to slip through.
   Added a 'not_sh' modifier that negates tests performed by
   functions defined in the shell source file.

3. Was initializing a variable to far down, which cause
   previously set value to be overridden.  (This was the
   result of the collision of the "redundant log" and
   lvconvert fix patches.)
2010-01-11 21:20:19 +00:00
Mike Snitzer
b422bb2187 remove unused variable 'i' that was recently introduced in lv_add_segment 2010-01-10 20:44:09 +00:00
Jonathan Earl Brassow
23f4aabd69 update comment 2010-01-08 23:06:36 +00:00
Jonathan Earl Brassow
77dd1c0e5f Add the new mirror log type "redundant". The options are now:
--mirrorlog core: in-memory log
--mirrorlog disk: persistent log
--mirrorlog redundant: redundant persistent log

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
2010-01-08 22:32:35 +00:00
Mike Snitzer
df13cf08d5 Add missing 'stack;' for all suspend_lv and resume_lv callers.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2010-01-05 21:07:31 +00:00
Milan Broz
60494fe74b Resume volumes in reverse order to preserve memlock pairing.
If renaming snapshot with virtual origin, the origin is renamed too.
But the code must resume LVs in reverse order to properly
pair memlock (in cluster locking).

(The resume of snapshot resumes origin too and later resume
is ignored otherwise.)
2010-01-05 15:58:11 +00:00
Dave Wysochanski
59baeb838c Update a few more uint64_t's related to the 64-bit status change.
At this point they probably do not matter but going forward they
may - depends on future patches for replicator, etc.  I think
these probably got missed because they were 'flags' so I changed
the name to 'status' to be consistent.  So the on-disk
things 'flags' and the in structure 'status' (bits).
NOTE: WHATS_NEW already has entry for this in current release.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
2009-12-04 17:48:32 +00:00
Milan Broz
fec4de9563 Fix tools to report error when stopped by user.
(And do not produce internal error message.)
2009-12-03 19:18:33 +00:00
Dave Wysochanski
c053fb62bc Fix setting of readahead in lvcreate.
The default comes from the configuration settings, with possible
commandline override.
2009-12-03 01:47:33 +00:00
Mike Snitzer
a2552d4f59 Switch status from 32-bit to 64-bit
The physical_volume, volume_group, logical_volume and lv_segment
structures' 'status' member is now uint64_t.

The alignment of these structures was also audited to remove holes.  The
movement of some members in 'volume_group' and 'lv_segment' eliminates
holes.  The 'physical_volume' structure still has one 4-byte hole after
'pe_size'; the other structures no longer have any holes.  Each
structures' size has not changed.
2009-11-24 22:55:55 +00:00
Alasdair Kergon
984abde146 Permit snapshots of mirrors. (brassow) 2009-10-26 10:01:56 +00:00
Alasdair Kergon
d557773841 Consolidate LV allocation into alloc_lv(). 2009-09-28 17:46:15 +00:00
Dave Wysochanski
c42b235610 Move _lvcreate into the internal library and rename to lv_create_single.
After some refactorings, we can now move the bulk of _lvcreate into the
internal library, and we can call from liblvm.  In the future, we should
refactor lv_create_single further, probably by segtype, to reduce the
size of struct lvcreate_params.  For now this is a reasonable refactor
and allows us to re-use the function from liblvm.


Author: Dave Wysochanski <dwysocha@redhat.com>
2009-07-26 02:33:35 +00:00
Alasdair Kergon
b8f47d5f69 Use log_error macro consistently throughout in place of log_err. 2009-07-15 20:02:46 +00:00
Milan Broz
a908d0030c Suspend virtual origin before real snapshot.
Because preload of table for snapshot can produce snapshot
metadata (in kernel cow header) read.

Code should suspend origin first to avoid possible deadlock
when preloading (thus calling snapshot in-kernel constructor)
for origin with suspended cow device.

(fixes previous commit)
2009-06-06 16:37:15 +00:00
Milan Broz
771e191e99 Fix rename of active snapshot with virtual origin.
Code must suspend/resume virtual origin too when renaming
snaphsot otherwise in kernel old name remains.
2009-06-01 15:55:06 +00:00
Milan Broz
59d06d4dc7 Fix log allocation segfault (fix previous commits).
If there is no free area for log, code should break the loop.
(Otherwise it uses uninitializes areas later.)

Easily reproducible using lvconvert --repair
 - kill device with log
 - run lvconvert --repair vg/lv (with no PV usable for log)
2009-06-01 14:23:38 +00:00
Alasdair Kergon
5cffbf0bb0 Handle multi-extent mirror log allocation when smallest PV has only 1 extent. 2009-05-30 00:09:27 +00:00
Alasdair Kergon
5746e2e769 When creating new LV, double-check that name is not already in use. 2009-05-28 01:59:37 +00:00
Alasdair Kergon
ea0e5e6ea8 Rename internal vorigin LV to match visible LV. 2009-05-28 00:29:14 +00:00
Alasdair Kergon
99113cc588 Suppress 'removed' messages displayed when internal LVs are removed.
Fix lvchange -a and -p for sparse LVs.
Fix lvcreate --virtualsize to activate the new device immediately.
2009-05-27 18:19:21 +00:00
Alasdair Kergon
25a2e7b80e Pre-release cleanups. 2009-05-21 03:04:52 +00:00
Milan Broz
a01e55b6ec Use lock query instead of activate_lv_excl
- switch lvremove to not force activate volume when removing
 - ditto for force resync

 - fix some wrong return codes in lvchange_resync()
2009-05-20 09:55:33 +00:00
Milan Broz
970f241c52 Check max_lv on only place and force the check only for new volume.
We can temporarily violate max_lv during mirror conversion etc.

(If the operation fails, orphan mirror images are visible to administrator
for manual remove for example. Not that this should ever happen:-)

Force limit only for lvcreate (and vg merge) command.

Patch also adds simple max_lv tests into testsuite
2009-05-13 21:29:10 +00:00
Milan Broz
82cf926094 Remove unneeded import parameter from lv_create_empty. 2009-05-13 21:28:31 +00:00
Milan Broz
afd9ba98c1 Merge lv_is_displayable and lv_is_visible.
Displayable and visible is the same thing.

volumes_count(vg) is now vg_visible_lvs() and always
returns number of LVs from user perspective.
2009-05-13 21:27:43 +00:00
Milan Broz
59d8429cb3 Introduce lv_set_visible & lv_set_invisible and use lv_is_visible always.
The vg->lv_count parameter now includes always number of visible
logical volumes.

Note that virtual snapshot volume (snapshotX) is never visible,
but it is stored in metadata with visible flag.
2009-05-13 21:26:45 +00:00
Milan Broz
0b706ac672 Introduce link_lv_to_vg and unlink_lv_from_vg functions.
link_lv_to_vg and unlink_lv_from_vg are the only functions
for adding/removing logical volume from volume group.

Only these function should manipulate with vg->lvs list.
2009-05-13 21:25:01 +00:00
Milan Broz
d60f341d96 Remove vg->lv_count and use counter function.
This should not cause problems but simplifies code a lot.

(the volumes_count is merged and renamed with lvs_visible
function by following patch.)
2009-05-13 21:22:57 +00:00
Milan Broz
8f3fd69ffa Move metadata backup call after vg_commit.
The backup() call store metadata from memory.

But in cluster backup() call performs
remote nodes metadata backup and it reads data from disk.

For metadata backup consistency,
patch moves all backup() calls after vg_commit.

(Moreover, some tools already do that this way.)
2009-04-21 14:31:57 +00:00
Milan Broz
e24f357c23 Fix memory pool leak.
Call the alloc_destory call always after finishing operation
with handle otherwise it will leak a memory pool.

Also fix return code in lv_extend.
2009-04-07 10:20:28 +00:00
Milan Broz
aa8111b3cd fix some issues when compiling with -D DEBUG_POOL
- fix compilation issues
- fix wrong pool object maipulation (lvm dumpconfig triggers assert)
- second iteration in loop _log_parallel_areas operates on non-existing object
2009-03-26 09:25:18 +00:00
Milan Broz
de28fed87b Fix "Calculate mirror log size" commit, the le_count should be always set. 2009-01-06 17:24:21 +00:00
Milan Broz
42dee539e2 Do not issue write behind lv size.
pvcreate $DEV
vgcreate -s 1k vg_test $DEV
lvcreate -l 1 -n lv1 vg_test
..
/dev/vg_test/lv1: write failed after 1024 of 4096 at 0: No space left on device

Just check for maximum write size in set_lv.
2008-12-19 15:26:01 +00:00
Milan Broz
6d1b3b5385 Calculate mirror log size instead of hardcoding 1 extent size.
It fails for 1k PE now.

Patch adds log_region_size into allocation habdle struct
and use it in _alloc_parallel_area() for proper log size calculation
instead of hardcoded 1 extent - which can fail.

Reproducer for incorrect log size calculation:
        DEV=/dev/sd[bcd]

        pvcreate $DEV
        vgcreate -s 1k vg_test $DEV
        lvcreate -m1 -L 12M -n mirr vg_test

https://bugzilla.redhat.com/show_bug.cgi?id=477040

The log size calculation is mostly copied from kernel code.
2008-12-19 15:24:52 +00:00
Peter Rajnoha
b47952641a Added displayable_lvs_in_vg and lv_is_displayable functions to deal with
the counts of visible LVs from user's perspective consistently throughout
the code.
2008-12-04 15:54:26 +00:00
Alasdair Kergon
2c44337bd5 Right, a simple build (without options) is working again. 2008-11-03 22:14:30 +00:00
Alasdair Kergon
9e71c18092 Fix temp table activation in mirror conversions not to happen in other cmds.
Fix temp table in mirror conversions to use always-present error not zero.
2008-10-23 11:21:04 +00:00
Alasdair Kergon
5da4feac0e Use temp table to set device size when converting mirrors.
(Avoids having same mirror table loaded twice concurrently by first
using a 'zero' table to set the size of the device so when mirror
table is preloaded it doesn't have to be activated immediately.)
2008-10-17 10:57:15 +00:00
Milan Broz
9352a2fdad Fix misleading error message when there is no allocatable extents in VG. 2008-09-29 09:59:10 +00:00
Zdenek Kabelac
e2151fb4af vgremove tries to remove lv snapshot first.
Added function lv_remove_with_dependencies().
2008-08-05 12:05:26 +00:00
Alasdair Kergon
fd1b118942 Check lv_count in vg_validate.
Fix internal LV counter when a snapshot is removed.
2008-04-22 12:54:33 +00:00
Dave Wysochanski
985ca02b6a Add vg_is_clustered() helper function.
Should be no functional change.
2008-04-10 17:09:32 +00:00
Dave Wysochanski
9332d2cb9d Add find_lv_in_lv_list() and find_pv_in_pv_list().
Update _add_pvs() to call find_pv_in_pv_list().
2008-03-28 19:08:23 +00:00
Alasdair Kergon
39d3ec0b51 Add missing no-longer-used segs_using_this_lv test to check_lv_segments. 2008-02-22 13:22:21 +00:00
Alasdair Kergon
2871881859 undo a few 'stack' moves 2008-01-30 14:17:29 +00:00
Alasdair Kergon
67cdbd7e4d Some whitespace tidy-ups. 2008-01-30 14:00:02 +00:00
Alasdair Kergon
c51b9fff19 Use stack return macros throughout. 2008-01-30 13:19:47 +00:00
Alasdair Kergon
3d13b4677d Refactor mirror log attachment code. 2008-01-26 00:25:04 +00:00
Alasdair Kergon
7644c656d8 add lvconvert messages 2008-01-18 22:00:46 +00:00
Alasdair Kergon
0c06de632a pre-release review cleanups 2008-01-17 17:17:09 +00:00
Alasdair Kergon
db24ceca33 rename lv_remap_error 2008-01-17 13:54:05 +00:00
Alasdair Kergon
5cf3c51857 lvconvert/vgreduce fixes 2008-01-17 13:13:54 +00:00
Alasdair Kergon
79182305ef additional safety check on new segment list 2008-01-16 20:00:01 +00:00
Alasdair Kergon
72baf0c345 Maintain lists of stacked LV segments using each LV. 2008-01-16 19:00:59 +00:00
Alasdair Kergon
1620864c35 more fixes 2007-12-20 23:12:27 +00:00
Alasdair Kergon
2b3dda7f72 various cleanups in recent patches 2007-12-20 22:37:42 +00:00
Alasdair Kergon
31e9db2690 stacked mirror support (incomplete) 2007-12-20 18:55:46 +00:00
Alasdair Kergon
a69ab65278 Major restructuring of pvmove and lvconvert layer manipulation code 2007-12-20 15:42:55 +00:00
Alasdair Kergon
b680c5c677 export can_split parameter until rest of pvmove allocation restructuring gets done 2007-12-05 22:11:20 +00:00
Alasdair Kergon
940d710ece drop mirrored_pv/mirrored_pe from alloc handle 2007-11-22 14:54:35 +00:00
Alasdair Kergon
a6b22cf317 readahead activation code (but no dm support yet) 2007-11-12 20:51:54 +00:00
Alasdair Kergon
b4068515e8 Enhance the management of readahead settings. 2007-11-09 16:51:54 +00:00
Alasdair Kergon
b7940c98c1 fix new lvremove checks - mustn't fail when activation is disabled 2007-11-04 16:28:57 +00:00
Dave Wysochanski
1b8de4cb25 Add pv_dev_name() to access PV device name.
Patch by Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
2007-10-12 14:29:32 +00:00
Dave Wysochanski
9ea1d647af Non-functional change - refactor lv_create_empty().
Remove struct format_instance param - we can safely obtain
this from vg->fid inside the function.
2007-10-11 19:20:38 +00:00
Dave Wysochanski
bf4f5b21a4 Some const fixups for previous checkins 2007-09-24 21:30:00 +00:00
Dave Wysochanski
f603fe64bd Modify lvremove to prompt for removal if LV active on other cluster nodes.
Add '-f' to vgremove to force removal of VG even if LVs exist.
Update vgremove man page for '-f'.
2007-08-28 16:14:49 +00:00
Alasdair Kergon
21bc366486 Clean up numerous compiler warnings that crept in recently.
Remove several unused parameters from _allocate().
2007-08-22 14:38:18 +00:00
Alasdair Kergon
edb3374d32 Clean up mirrorlog argument processing.
Only permit --force, --verbose and --debug arguments to be repeated.
2007-08-21 19:46:36 +00:00
Dave Wysochanski
3d33abbb8c Prepare to move guts of vgremove into lvm library.
Fixup force_t.
2007-08-21 16:40:33 +00:00
Alasdair Kergon
be6845999b Fix inconsistent licence notices: executables are GPLv2; libraries LGPLv2.1. 2007-08-20 20:55:30 +00:00
Dave Wysochanski
cc78b9800d Move lv_remove_single() into library (lv_manip.c, metadata-exported.h).
Move yes_no_prompt() into library (display.c, display.h).
Fixup includes as a result of movement of prior two functions.
Fixup force_t enum to be more descriptive.
2007-08-20 17:04:53 +00:00
Dave Wysochanski
be51e010b4 Remove extra checks for sub LV renaming.
Patch by Jun'ichi Nomura <j-nomura@ce.jp.nec.com>.
2007-08-08 18:00:36 +00:00
Dave Wysochanski
2835f025b6 A few more cleanups for lvrename of mirrors checkin:
* add struct lv_names for old/new names
* replace lv->status & MIRROR checks with lv_is_visible()
2007-08-07 18:55:38 +00:00
Dave Wysochanski
4f4d5fdc67 Some simple fixups for last checkin:
* remove "_" from "return_0"
* improve some naming and terminology
* add 'const'
2007-08-07 16:57:09 +00:00
Dave Wysochanski
f58224119c Add support for renaming mirrored LVs.
Patch by Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
2007-08-06 20:35:48 +00:00
Jim Meyering
e5e120a502 For consistency, rename local variable: s/newname/new_name/g. 2007-08-06 14:57:48 +00:00
Jim Meyering
b7449ebc37 Make lv_rename's interface "const correct".
* lib/metadata/lv_manip.c (lv_rename): Make char* param "const".
* lib/metadata/metadata-exported.h: Update prototype, too.
2007-08-06 09:04:21 +00:00
Dave Wysochanski
b7cd307f9b Factor out core of lvrename to lv_rename library function.
Patch by Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
2007-08-03 21:22:10 +00:00
Milan Broz
aa8a4d96bd Fix create mirror with name longer than 22 chars. 2007-01-05 15:53:40 +00:00
Alasdair Kergon
5b61ca7281 When lvconvert allocates a mirror log, respect parallel area constraints.
Use loop to iterate through the now-ordered policy list in _allocate().
Check for failure to allocate just the mirror log.
Introduce calc_area_multiple().
Support mirror log allocation when there is only one PV: area_count now 0.

(See lvm-devel list archives for further details.)
2006-12-13 03:39:58 +00:00
Alasdair Kergon
948ee3e396 Fix detection of smallest area in _alloc_parallel_area() for cling policy. 2006-12-12 19:30:10 +00:00
Alasdair Kergon
c89024511b Fix high-level free space check for partial allocations. 2006-10-30 16:10:55 +00:00
Alasdair Kergon
2bdc8e1252 Perform high-level free space check before each allocation attempt. 2006-10-23 15:54:51 +00:00
Alasdair Kergon
de5c82a0d9 add cling allocation policy 2006-10-08 12:01:13 +00:00
Alasdair Kergon
b4e2a0e179 check_contiguous to use for_each_pv 2006-10-07 23:40:36 +00:00
Alasdair Kergon
80592d845d more refactoring 2006-10-07 16:00:28 +00:00
Alasdair Kergon
b6f8552074 Extend _for_each_pv() to allow termination without error. 2006-10-07 12:41:06 +00:00
Alasdair Kergon
7dce16f234 abstract _is_contiguous() 2006-10-07 11:34:53 +00:00
Alasdair Kergon
b4ccb00b36 move _for_each_pv() 2006-10-07 11:23:22 +00:00
Alasdair Kergon
68d7c0e601 Remove duplicated pv arg from _check_contiguous(). 2006-10-07 11:00:09 +00:00
Alasdair Kergon
8d18637eca Fix _for_each_pv() for mirror with core log. 2006-10-05 21:24:48 +00:00
Alasdair Kergon
bbb068562e Extend _check_contiguous() to detect single-area LVs.
Include mirror log (untested) in _for_each_pv() processing.
Use MIRROR_LOG_SIZE constant.
Remove struct seg_pvs from _for_each_pv() for generalisation.
Avoid adding duplicates to list of parallel PVs to avoid.
2006-09-11 21:14:56 +00:00
Alasdair Kergon
d9c6bbab80 Fix several incorrect comparisons in parallel area avoidance code.
Fix segment lengths when flattening existing parallel areas.
Log existing parallel areas prior to allocation.
Fix mirror log creation when activation disabled.
2006-09-11 14:24:58 +00:00
Alasdair Kergon
0550c1b618 Move lvm_snprintf into libdevmapper. 2006-08-21 12:54:53 +00:00
Alasdair Kergon
f17f6814c9 Add --corelog to lvcreate and lvconvert. 2006-05-11 18:54:04 +00:00
Alasdair Kergon
898e6f8e41 Add mirror_library description to example.conf.
More compile-time cleanup.
2006-05-11 17:58:58 +00:00
Alasdair Kergon
72b2cb613a Make SIZE_SHORT the default for display_size().
Fix some memory leaks in error paths found by coverity.
Use C99 struct initialisers.
Move DEFS into configure.h.
Clean-ups to remove miscellaneous compiler warnings.
2006-05-09 21:23:51 +00:00
Alasdair Kergon
6aa17fe8d2 remove redundant list_init 2006-04-27 17:58:48 +00:00
Alasdair Kergon
15d91f5a68 More dmeventd support. 2005-12-02 20:35:07 +00:00
Alasdair Kergon
c27920b1ca Determine parallel PVs to avoid with ALLOC_NORMAL allocation. (untested) 2005-11-28 20:01:00 +00:00
Alasdair Kergon
e3195fecf1 alloc avoids parallel pvs when supplied 2005-11-24 21:23:55 +00:00
Alasdair Kergon
c0a33e10ae preparation for parallel_areas changes to allocation code 2005-11-24 20:58:44 +00:00
Alasdair Kergon
2fb492f665 Fix lv_empty. 2005-11-24 18:46:51 +00:00
Alasdair Kergon
c00f802202 _find_parallel_space -> _find_segment_space 2005-11-24 18:00:47 +00:00
Alasdair Kergon
b79c897ea1 Extend allocation areas to avoid overflow with contiguous with other PVs.
Another pvmove fix.
2005-11-10 14:45:39 +00:00
Alasdair Kergon
1817dbaf60 more mirror library functions 2005-10-28 12:48:50 +00:00
Alasdair Kergon
d31718600b Fix contiguous allocation without preceding segments. 2005-10-27 22:20:33 +00:00
Alasdair Kergon
e6c20c6100 Fix new mirror_seg pointer. 2005-10-27 21:51:28 +00:00
Alasdair Kergon
5727a8fa85 Add mirror_seg pointer to lv_segment struct. (incomplete & untested) 2005-10-27 19:58:22 +00:00
Alasdair Kergon
352a99b95a Use dm_is_dm_major instead of local copy.
Allow mapped devices to be used as PVs safely.
2005-10-25 19:08:21 +00:00
Alasdair Kergon
06820362bd Split lv_segment_area from lv_segment to permit extension. 2005-10-18 13:43:40 +00:00
Alasdair Kergon
2262b32057 Use hash, bitset, malloc, pool from libdevmapper. 2005-10-16 23:03:59 +00:00
Alasdair Kergon
10b44b2d4a Only make one attempt at contiguous allocation. 2005-07-12 14:50:45 +00:00
Alasdair Kergon
5e947dac48 Various allocation-related pvmove fixes. 2005-06-14 17:54:48 +00:00
Alasdair Kergon
5748cb17f8 Remove hard-coded 64k text metadata writing restriction. 2005-06-07 11:00:07 +00:00
Alasdair Kergon
ffb0e5387b Allow mirror images to be resized. 2005-06-03 19:48:19 +00:00
Alasdair Kergon
c77de77790 Allow mirror images to have more than one segment. 2005-06-03 18:07:13 +00:00
Alasdair Kergon
5c9a54e480 lvremove mirror images 2005-06-03 15:44:12 +00:00
Alasdair Kergon
8211a13ce0 Always insert an intermediate layer for mirrors.
Suppress hidden LVs from reports unless --all is given.
Use square brackets for hidden LVs in reports.
Centralise restrictions on LV names.
2005-06-03 14:49:51 +00:00
Alasdair Kergon
60f13f01d2 Basic support for mirrors. 2005-06-01 16:51:55 +00:00
Alasdair Kergon
e7c47a5dad Start merging cloned allocation functions. 2005-05-17 13:49:45 +00:00
Alasdair Kergon
0888dc43cf Fix contiguous allocations with linear. 2005-05-11 16:46:59 +00:00
Alasdair Kergon
7f2def9e6d Remove lists of free PV segments.
Simplify pv_maps code and remove slow bitset algorithm.
2005-05-11 15:02:49 +00:00
Alasdair Kergon
32469fb25c lv_reduce tidying.
Remove some unnecessary parameters.
Introduce seg_is macros.
2005-05-09 16:59:01 +00:00
Alasdair Kergon
15db9fcfbf Reinstate full PV size when removing from VG.
Support loopfiles for testing.
Complete the pv_segment support.
2005-05-03 17:28:23 +00:00
Alasdair Kergon
22c1a65f74 extend alloc_lv_segment 2005-04-22 15:44:00 +00:00
Alasdair Kergon
e40d124e14 set_lv_segment_area_pv/lv 2005-04-22 15:43:02 +00:00
Alasdair Kergon
072893aabd Internal snapshot code restructuring. 2005-04-07 12:39:44 +00:00
Alasdair Kergon
3a6edbed16 add lvid to lv_create_empty 2005-04-07 12:29:46 +00:00
Alasdair Kergon
bd46a496c7 pool debugging 2004-11-23 18:23:23 +00:00
Alasdair Kergon
c4ddb31abf Rename old segtypes files to segtype. 2004-09-16 18:40:56 +00:00
Alasdair Kergon
68eb9e3b1f Test for incompatible format/segtype combinations in lv_extend. 2004-09-14 13:56:18 +00:00
Alasdair Kergon
bfa258b3e7 Set area_count within alloc_lv_segment 2004-05-24 17:30:00 +00:00
Alasdair Kergon
a0a23eff4b Rename allocation policies; add --alloc to cmdline; LV inherits from VG. 2004-05-18 22:12:53 +00:00
Alasdair Kergon
1832f310ac Add --type to lvcreate/resize.
Add virtual segment types, zero and error.

A large sparse device can be constructed as a writeable snapshot of a large
zero device.
2004-05-11 16:01:58 +00:00
Alasdair Kergon
1d2ebf6281 Push lv_create & alloc policy up to tool level. 2004-05-05 18:49:21 +00:00
Alasdair Kergon
cb919290c2 Separate out polldaemon. 2004-05-05 17:56:20 +00:00
Alasdair Kergon
4922197a33 Begin to separate out segment types. 2004-05-04 21:25:57 +00:00
Alasdair Kergon
6606c3ae81 Update copyright notices. 2004-03-30 19:35:44 +00:00
Alasdair Kergon
2da02bbd16 move lock_lvs; add lock memlock code 2004-03-26 20:49:35 +00:00
Alasdair Kergon
ff6d21103b LV allocation variable renaming 2004-03-26 20:35:14 +00:00
Alasdair Kergon
68df28296d Fix lvreduce pv extents calculations. 2004-03-19 16:19:41 +00:00
Alasdair Kergon
cf6dd25126 tagging 2004-03-08 17:19:15 +00:00
Alasdair Kergon
12bb377f9b Default to unlimited number of LVs/PVs in lvm2 format. 2003-11-06 20:33:34 +00:00
Alasdair Kergon
fee16e1049 Cope better with LVM1 minor numbers & LV numbers. 2003-11-06 16:58:38 +00:00
Alasdair Kergon
85c1926171 Improve segment merge/split code. 2003-09-15 18:22:50 +00:00
Alasdair Kergon
44c319cf0d move fields 2003-05-06 12:06:02 +00:00
Alasdair Kergon
97d344e2cb basic pvmove support 2003-04-30 15:23:43 +00:00
Alasdair Kergon
b8c919b402 o Metadata area struct change.
o Support physical extent restrictions on PV lists for allocations
    e.g. lvcreate -l 200 vg1 /dev/sda1:100-199:300-399
2003-04-24 22:23:24 +00:00
Alasdair Kergon
27f364af95 Allow for specification of major number as well as minor. 2003-04-02 19:14:43 +00:00
Alasdair Kergon
a421f74371 vgreduce --removemissing to remove missing PVs & deps & make VG consistent 2003-01-17 21:04:26 +00:00
Alasdair Kergon
8ef2b021ed Default stripesize 64k & config file setting for it;
Clear many compiler warnings (i386) & associated bugs - hopefully without
introducing too many new bugs:-)  (Same exercise required for other archs.)
Default compilation has optimisation - or else use ./configure --enable-debug
2002-12-19 23:25:55 +00:00
Alasdair Kergon
5a52dca9c2 Some new features. 2002-11-18 14:04:08 +00:00
Joe Thornber
097d49e73d i) There's now a seperate field in struct logical_volume that stores the
allocation policy.  This can currently take one of three values:

   typedef enum {
        ALLOC_NEXT_FREE,
        ALLOC_STRICT,
        ALLOC_CONTIGUOUS
   } alloc_policy_t;

    Notice that 'SIMPLE' has turned into the slightly more meaningful NEXT_FREE.

ii) Put code into display.[hc] for converting one of these enums to a
    text representation and back again.

ii) Updated the text format so this also has the alloc_policy field.
2002-07-11 14:21:49 +00:00
Alasdair Kergon
61e9603be5 Remember to update VG free_count when reducing size of an LV. 2002-05-30 16:08:19 +00:00
Alasdair Kergon
25b733809a Merge with text format branch.
Lots of changes/very little testing so far => there'll be bugs!

Use 'vgcreate -M text' to create a volume group with its metadata stored
in text files.  Text format metadata changes should be reasonably atomic,
with a (basic) automatic recovery mechanism if the system crashes while a
change is in progress.

Add a metadata section to lvm.conf to specify multiple directories if
you want (recommended) to keep multiple copies of the metadata (eg on
different filesystems).

e.g. metadata {
        dirs = ["/etc/lvm/metadata1","/usr/local/lvm/metadata2"]
}

Plenty of refinements still in the pipeline.
2002-04-24 18:20:51 +00:00
Alasdair Kergon
15c325f06a o Use new LCK_HOLD flag to indicate whether lock should be held on return
from lock_vol() - otherwise it now attempts to acquire the lock and then
  immediately releases it.
o Extend the id field in struct logical_volume to hold VG uuid + LV uuid
  for format1. This unique lvid can be used directly when calling lock_vol().
o Add the VG uuid to vgcache to make VG uuid lookups possible.  (Another
  step towards using them instead of VG names internally.)
2002-03-05 20:03:09 +00:00
Heinz Mauelshagen
f48d3bcbd0 First cut on "pvcreate -s" 2002-02-15 01:26:16 +00:00
Alasdair Kergon
60274aba6e Preparation for an LVM2 liblvm - pass cmd_context into each tool and
link some globals that the tools need into that structure.
2002-02-11 20:50:53 +00:00
Alasdair Kergon
812c699c8d Basic support for persistent minor numbers;
slightly different from the current LVM1 method.

  lvcreate --persistent y  --minor 10   (to specify when created)
  lvchange --persistent n  (to turn off)
  lvchange --persistent y  --minor 11   (to change)

--persistent uses a new LV status flag stored on disk
minor number is stored on disk the same way as LVM1 does
(but major number stored is 0; any LVM1 major/minor setting gets lost)

  lvchange -ay --minor 12 (to activate using minor 12, regardless of the
                           on-disk setting, which doesn't get changed)

--minor == -m
--persistent == -M
2002-02-01 17:54:39 +00:00
Alasdair Kergon
b2207a1c40 Improve allocation error messages when PVs in a VG have the allocatable
flag unset.
2002-01-24 17:26:00 +00:00
Joe Thornber
0cf2445bb7 o Add extra parameter to lv_manip fns 2002-01-24 17:15:49 +00:00
Joe Thornber
75e4d06ade o Allow fractional parts for size args. eg, lvcreate -L 34.4M
o  Fix a couple of bugs related to the earlier lv_list change
2002-01-21 17:43:10 +00:00
Joe Thornber
f868d63582 o Similar changes for lv_list. 2002-01-21 16:49:32 +00:00
Alasdair Kergon
4a624ca055 o ACTIVE is no longer a status flag - lv_active() used to check if an LV
is active in the device-mapper.
o Many operations can be carried out regardless of whether the VG is
  active or not.
o vgscan does not activate anything - use vgchange.
o Change lvrename to support renaming of active LVs.
o Remove '//' appearing in some pathnames.
o Dummy lv_check_segments() for compilation.
2002-01-10 23:21:07 +00:00
Joe Thornber
9b5db6c270 o First pass at import.c. Still waiting for label code for the uuid->pv
mapping.
2002-01-10 11:18:08 +00:00
Joe Thornber
16ab7a0da2 o New function 'merge_segments'
o  Call said function at end of lv_extend
2002-01-07 15:08:28 +00:00
Joe Thornber
3eb1b74b29 o Get format-text.c compiling. 2002-01-07 09:16:20 +00:00
Alasdair Kergon
41b2fd5f4d o Use lvm_snprintf wherever return value is used
o Add parameters to set retention limits for backups
2001-12-31 19:09:51 +00:00
Alasdair Kergon
faa556e759 Add internal cache holding a 'hint' list of the PVs belonging to each VG.
A substantial speed-up - particularly in readline mode.
If the hints turn out to be wrong, the relevant parts get thrown away.
vgscan destroys it totally.  In both cases it then rebuilds itself as
required.
2001-12-13 00:07:29 +00:00
Alasdair Kergon
b74c8033a2 Fixes for allocation of striped volumes. 2001-12-07 21:17:12 +00:00
Joe Thornber
c0ca88c287 o Comparison function was sorting things in ascending rather than
descending order.

o free off the sort array when finished with it.
2001-11-30 09:19:46 +00:00
Joe Thornber
488a58a998 o Striped allocator
o  Changed pv_map.c to maintain the list of free areas in size order, which
   is more helpful to the allocators.  If you want to allocate a bit of an
   area call consume_area(area, size), this will adjust the area if there's
   some space left and shuffle it to the correct place in the list.


Not tested.
2001-11-29 18:45:35 +00:00
Alasdair Kergon
579944d327 o Tool support for segments.
o vgmerge working.
2001-11-28 13:45:50 +00:00
Joe Thornber
39497a4479 o These now compile. 2001-11-27 17:39:15 +00:00
Joe Thornber
0bab65915d o Sync up todays work on converting to the segmented representation of
logical volumes.  It includes:

   format1 changes.

   metadata.h changes.

   lv_manip.c changed (striped allocation still not done though).

   activate.c changes.

Nothing has been near a compiler as yet.

Alasdair can you look at changing display.c to use to output the mappings
in a more segment oriented format please ?

I haven't put the span list into struct physical_volume to represent allocated
extents.  I think the burden of maintaining it for things like lv_extend may
out weigh it's uses.
2001-11-27 16:37:33 +00:00
Alasdair Kergon
3080a75445 o activation & active status tests
o lvdisplay fields from kernel
o update lv->size on resize
2001-11-21 19:32:35 +00:00
Alasdair Kergon
9b7742bb36 More LV-related tidying. lvdisplay without args now shows all LVs. 2001-11-14 18:38:07 +00:00
Alasdair Kergon
6e74833c6c Avoid generating duplicate lv names 2001-11-14 14:12:01 +00:00
Alasdair Kergon
5238b63f1a Miscellaneous tidying 2001-11-14 13:52:38 +00:00
Joe Thornber
e55ae5d32e o lvcreate no longer needs the explicit -n flag
o  disabled zeroing of lv until bug's worked out
2001-11-14 12:07:37 +00:00
Alasdair Kergon
03a8a07d67 Merge lvreduce & lvextend into lvresize. 2001-11-13 14:17:50 +00:00
Joe Thornber
d53f88d7af o Stuff 2001-11-12 19:28:50 +00:00
Joe Thornber
4daacc38cb o Add ALLOC_SIMPLE 2001-11-12 17:55:05 +00:00
Joe Thornber
2107f48208 o Split struct io_space into:
struct format_handler - format methods
   struct format_instance - links instance data, methods, and cmd
   struct cmd_context - dev_dir, memory allocator, device filter
2001-11-12 12:16:57 +00:00
Alasdair Kergon
7858f6fb16 o Added lvextend
o Full signed arguments to lvreduce/lvextend
o Consistent lv_number/pe map use
o Populate pv->pe_allocated
o Fixes for allocation/writing of multiple LVs
2001-11-09 22:01:04 +00:00
Joe Thornber
2ba80b436f o Added lvs_in_vgs_opened 2001-11-07 15:02:07 +00:00
Alasdair Kergon
642c2e964b lvcreate 2001-11-06 19:02:26 +00:00
Joe Thornber
c84cc3847c o lv_extend 2001-11-06 12:01:46 +00:00
Joe Thornber
2cffd7d4e1 o Factor _allocate out for use by lv_extend 2001-11-06 11:31:29 +00:00
Joe Thornber
15e35a737c o lv_reduce
o  pv_maps wasn't taking a list of acceptable pvs
2001-11-06 11:19:33 +00:00
Joe Thornber
ed0502e98b o Contiguous allocation 2001-11-06 10:55:01 +00:00
Joe Thornber
dd4e3f9efc o lv_manip.c will contain the code for lv_create, lv_extend and lv_reduce. 2001-11-06 10:29:56 +00:00