IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
During the call today we agreed to work towards -rc1 in January. Nevertheless,
I already started writing this up and I'll push it so it doesn't get lost.
I didn't include all the changes to systemd-repart, because those are still in
flux.
(follow-up of #15958)
In #15958 we deprecated passing positional argument to reboot by
generate a warning. It's been two years now and I believe it can
be dropped completely, as per requested in #15773.
(s) is just ugly with a vibe of DOS. In most cases just using the normal plural
form is more natural and gramatically correct.
There are some log_debug() statements left, and texts in foreign licenses or
headers. Those are not touched on purpose.
Try to separate the description so that changes are described first, and the
discussion follows separately. Remove some repeated verbose descriptions of the
subject: if one sentence describes that UKI contains an signature and describes
it in detail, the next sentence can just say "the signature" without
elaborating. Also, we don't do version-keying yet, so don't say "future"
kernels — older kernels will work too.
The new conditoins are placed inside of services, but they cannot be
used to test service creds, but only system creds. This deserves
explicit mention, since it might be confusing otherwise.
Reverts a small part of 02380e1946
In particular, 'system/service credentials' are now described as simply
'credentials'. The selling point of credentials is that they are transparently
propagated from the system to services, so distinguishing between system and
service credentials is not important.
The description of ordering against initrd-switch-root.target is completely
rewritten. The old description was confused.
I think the description of systemd-measure should be reworked to clearly
describe what new functionality is provided and what policy changes are
built on top. But I don't qrok the details, so I left this part unchanged.
Some NEWS entries are tweaked a bit to address complaints about readability
from users.
"udev" is pronounced as /ˈjuːdɛv/, like in "user", hence "a" not "an".
Many distributions ship systemd-networkd as a separate file so we
need to be able to ship the tmpfiles networkd entries as part of
that separate networkd package. Let's split the networkd entries
into a separate file to make that possible.
%R is already used in service manager specifier expansion (cgroup root),
hence use a different char, that was so far not used.
Follow-up for: 6ceb0a4094
Let's be more precise here. Otherwise people might think this describes
the software system or so. We already expose this via hostnamed as
HardwareVendor/HardwareModel hence use the exact same wording.
(Note that the relevant props on the dmi device are just VENDOR/MODEL,
but that's OK given that DMI really is about hardware anyway,
unconditionally, hence no chance of confusion there.)
Follow-up for 4fc7e4f374
The old text was simply wrong, we used to read $layout from
/etc/kernel/install.conf and the machine ID from
$KERNEL_INSTALL_MACHINE_ID from /etc/machine-info. Correct that.
Apparently KERNEL_INSTALL_MACHINE_ID was already known back in v235
times, hence don't mention it anymore.
it's kinda weird retro-fixing these NEWS entries, given we deprecate
them again, but I couldn't let this really incorrect stuff be.
Conceptually the feature is great and should exist, but in its current
form should be worked to be generic (i.e. not specific to
Windows/Bitlocker, but appliable to any boot entry), not be global (but
be a per-entry thing), not require a BootXXXX entry to exist, and not
check for the BitLocker signature (as TPMs are not just used for
BitLocker).
Since we want to get 251 released, mark it in the documentation, in NEWS
and in code as experimental and make clear it will be reworked in a
future release. Also, make it opt-in to make it less likely people come
to rely on it without reading up on it, and understanding that it will
likely change sooner or later.
Follow-up for: #22043
See: #22390
/dev/urandom is seeded with RDRAND. Calling genuine_random_bytes(...,
..., 0) will use /dev/urandom as a last resort. Hence, we gain nothing
here by having our own RDRAND wrapper, because /dev/urandom already is
based on RDRAND output, even before /dev/urandom has fully initialized.
Furthermore, RDRAND is not actually fast! And on each successive
generation of new x86 CPUs, from both AMD and Intel, it just gets
slower.
This commit simplifies things by just using /dev/urandom in cases where
we before might use RDRAND, since /dev/urandom will always have RDRAND
mixed in as part of it.
And above where I say "/dev/urandom", what I actually mean is
GRND_INSECURE, which is the same thing but won't generate warnings in
dmesg.
All those pages contain a redirect at the top of the page, so it doesn't
make much sense to tell people to take the detour. Linking directly will
also increase the search rankings of the new pages.
If KERNEL_INSTALL_MACHINE_ID is defined in /etc/machine-info, prefer it
over the machine ID from /etc/machine-id. If a machine ID is defined in
neither /etc/machine-info nor in /etc/machine-id, generate a new UUID
and try to write it to /etc/machine-info as KERNEL_INSTALL_MACHINE_ID
and use it as the machine ID if writing it to /etc/machine-info succeeds.
In practice, this means we have a more robust fallback if there's no
machine ID in /etc/machine-id than just using "Default" and allows
image builders to force kernel-install to use KERNEL_INSTALL_MACHINE_ID
by simply writing it to /etc/machine-info themselves.
This reverts commit cb0e818f7c.
After this was merged, some design and implementation issues were discovered,
see the discussion in #18782 and #19385. They certainly can be fixed, but so
far nobody has stepped up, and we're nearing a release. Hopefully, this feature
can be merged again after a rework.
Fixes#19345.
This reverts commit 6d18c13e79.
The syntax like "0666" is very unclear. It only makes sense for some subset of
people who do C programming. Let's use the much more sensible modern python
syntax instead.
* for /dev/vsock a file permission of 0o666 was mentioned but 0666 is probably better understood, so let's use that
* correct non existing command 'ip dev'
I left the stuff related to [NextHop] out. There are still
patches outstanding, and we can add a comprehensive entry once
things reached the final form.
This follows the addition of DEFAULT_HOSTNAME= in os-release.
The distinction between the value from os-release or the env var and
the compile-time setting is not made in the api: HostnameSource is
"default" is all cases. I think that this level of detail is not needed,
because the users of this mostly care whether the hostname was set by
user configuration or not.
We need a writable /run for most operations, but in case a read-only
RootImage (or similar) is used, by default there's no additional
tmpfs mount on /run. Change this behaviour and document it.
In NEWS, the new option was described twice, most likely because the first
description was tucked away in a paragraph about some other subject.
While at it, improve the descriptions in the man page to make it easier to grok
what that option really does.
A distro (Fedora in particular) may want to enable oomd in a unstable
branch for testing, even though the package as a whole is compiled in release
mode. Let's emit a warning but otherwise allow this.
Let's make this easier for readers by grouping common subjects together.
Roughly: pid1 features, unit file changes, general syntax changes, kernel
options, general defaults, udevd features, networkd and .network/.netdev
features, networkctl, resolved, systemctl, systemd-run, journald, journalctl,
various other tools, low-level dbus and library stuff, documentation.
https://tools.ietf.org/html/draft-knodel-terminology-02https://lwn.net/Articles/823224/
This gets rid of most but not occasions of these loaded terms:
1. scsi_id and friends are something that is supposed to be removed from
our tree (see #7594)
2. The test suite defines an API used by the ubuntu CI. We can remove
this too later, but this needs to be done in sync with the ubuntu CI.
3. In some cases the terms are part of APIs we call or where we expose
concepts the kernel names the way it names them. (In particular all
remaining uses of the word "slave" in our codebase are like this,
it's used by the POSIX PTY layer, by the network subsystem, the mount
API and the block device subsystem). Getting rid of the term in these
contexts would mean doing some major fixes of the kernel ABI first.
Regarding the replacements: when whitelist/blacklist is used as noun we
replace with with allow list/deny list, and when used as verb with
allow-list/deny-list.
This is an attempt to clean up the POP3/SMTP/LPR/… DHCP lease server
data logic in networkd. This reduces code duplication and fixes a number
of bugs.
This removes any support for collecting POP3/SMPT/LPR servers acquired
via local DHCP client releases since noone uses that, and given how old
these protocols are I doubt this will change. It keeps support for
configuring them for the dhcp server however.
The differences between the DNS/NTP/SIP/POP3/SMTP/LPR configuration
logics are minimized.
This removes the relevant symbols from sd-network.h (which is an
internal API only at this point after all).
This is unfortunately not well test, given the old code for this had
barely any tests. But the new code should not perform worse at least,
and allow us to release, since it corrects some interfaces visible in
the .network configuration format.
Fixes: #15943
Six years ago we declared it obsolete and removed it from the docs
(c073a0c4a5) and added a note about it in
NEWS. Two years ago we add warning messages about it, indicating the
feature will be removed (41b283d0f1) and
mentioned it in NEWS again.
Let's now kill it for good.
With cgroup v2 the cgroup freezer is implemented as a cgroup
attribute called cgroup.freeze. cgroup can be frozen by writing "1"
to the file and kernel will send us a notification through
"cgroup.events" after the operation is finished and processes in the
cgroup entered quiescent state, i.e. they are not scheduled to
run. Writing "0" to the attribute file does the inverse and process
execution is resumed.
This commit exposes above low-level functionality through systemd's DBus
API. Each unit type must provide specialized implementation for these
methods, otherwise, we return an error. So far only service, scope, and
slice unit types provide the support. It is possible to check if a
given unit has the support using CanFreeze() DBus property.
Note that DBus API has a synchronous behavior and we dispatch the reply
to freeze/thaw requests only after the kernel has notified us that
requested operation was completed.
It's not that I think that "hostname" is vastly superior to "host name". Quite
the opposite — the difference is small, and in some context the two-word version
does fit better. But in the tree, there are ~200 occurrences of the first, and
>1600 of the other, and consistent spelling is more important than any particular
spelling choice.
Hiding the first column, which may contain bullet circles, with --no-legend
is undocumented and potentially unexpected. On the other hand, not printing
bullet circles with --plain is documented so hiding the column with that
switch is sensible.
The combination "--full --no-legend --no-pager --plain" is appropriate for
automated processing of systemctl output.
Right now the kernel will not dump anything that went through setuid or
setgid. But it is routine for daemons to do that, and it makes things hard to
debug.
systemd-coredump saves the coredump readable by the users the process was
running as. This should be enough to avoid information leakage. So let's also
tell the kernel to do the coredump.
For https://bugzilla.redhat.com/show_bug.cgi?id=1790972.
Both patterns are stored in the same file, so they are enabled or disabled
together. (Though suid_dumpable=2 is supposed to be safe even when writing to
plain files.)
This never made into a release, so we can change the name with impunity.
Suggested by Davide Pesavento.
I opted to add the "ing" ending. "Fair queuing" is the name of the general
concept and algorithm, and "Fair queue" is mostly used for the implementation
name.
This makes the naming more consistent: we now have
bootctl systemd-efi-options,
$SYSTEMD_EFI_OPTIONS
and the SystemdOptions EFI variable.
(SystemdEFIOptions would be redundant, because it is only used in the context
of efivars, and users don't interact with that name directly.)
bootctl is adjusted to use 2sp indentation, similarly to systemctl and other
programs.
Remove the prefix with the old name from 'bootctl systemd-efi-options' output,
since it's redundant and we don't want the old name anyway.
On some systems with lots of devices, device probing for certain drivers can
take a very long time. If systemd-udevd detects a timeout and kills the worker
running modprobe using SIGKILL, some devices will not be probed, or end up in
unusable state. The --event-timeout option can be used to modify the maximum
time spent in an uevent handler. But if systemd-udevd exits, it uses a
different timeout, hard-coded to 30s, and exits when this timeout expires,
causing all workers to be KILLed by systemd afterwards. In practice, this may
lead to workers being killed after significantly less time than specified with
the event-timeout. This is particularly significant during initrd processing:
systemd-udevd will be stopped by systemd when initrd-switch-root.target is
about to be isolated, which usually happens quickly after finding and mounting
the root FS.
If systemd-udevd is started by PID 1 (i.e. basically always), systemd will
kill both udevd and the workers after expiry of TimeoutStopSec. This is
actually better than the built-in udevd timeout, because it's more transparent
and configurable for users. This way users can avoid the mentioned boot problem
by simply increasing StopTimeoutSec= in systemd-udevd.service.
If udevd is not started by systemd (standalone), this is still an
improvement. udevd will kill hanging workers when the event timeout is
reached, which is configurable via the udev.event_timeout= kernel
command line parameter. Before this patch, udevd would simply exit with
workers still running, which would then become zombie processes.
With the timeout removed, the sd_event_now() assertion in manager_exit() can be
dropped.
Discussed in #13743, the -.service semantic conflicts with the
existing root mount and slice names, making this feature not
uniformly extensible to all types. Change the name to be
<type>.d instead.
Updating to this format also extends the top-level dropin to
unit types.
I think we can mention that systemd-resolved is able to validate IP
address certificates and prefer TLS 1.3 before TLS 1.2 now.
Also the `machinectl reboot` command actually works now.
Signed-off-by: Christian Rebischke <chris@nullday.de>
