IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
and a spelling for the status property.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl9ryJUQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgWLgB/0fWWkgfABOtcqPv30NQwThE5d/zzGtS5vu
IBMdWK6EWgqT7eUcd/rVhfEJo+YuIyOfKU0AEKROyK/XjCaThgp4ERqpf4Obv3yf
T1mhTfqBbGt3fF39NTNBSUWO2kywOnZa32pUDZcckFgQEpSQNHsW8NYM7W0tj9Z7
GB0aMij23ps5ckN8bVd9ZSdwkTIu0hfr1o/GQRLhKbtrs/+CiJERjcfJVyKvKc5w
ieqaGyHvJ9Bjw83muHN2EUL7gJHQvo6WJI7XFiUxqSDOw4WqM/3UgganRVdwDpp6
88gBLRAWw2CUK5WMlQx2oJ8eiUZQL6eckJNM3+0NoP5LA8Owd6bI
=EIWN
-----END PGP SIGNATURE-----
Merge tag 'v5.10-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
cpu-supply fixes (supply for each cpu core not only cpu0)
and a spelling for the status property.
* tag 'v5.10-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: replace status value "ok" by "okay"
ARM: dts: rockchip: update cpu supplies on rk3066a
ARM: dts: rockchip: rk3066a: add label to cpu@1
ARM: dts: rockchip: update cpu supplies on rk3288
Link: https://lore.kernel.org/r/1834049.gShM3QRH0n@diego
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix the memory region used by pinctrl and sps drivers on the S700 SoC.
The issue is fixed by limiting the address space used by pinctrl driver.
In hardware these two are separate subsystems but the hw engineers somehow
merged the registers space into one. So we now limit the address space with
appropriate offsets for the two drivers.
- Add DMA controller support for S700 SoC. The relevant driver changes are
picked up by DMA Engine mainatainer. The DMA on this SoC can be used for
mem-to-mem and mem-to-peripheral transfers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAl9psSsACgkQVZ8R5v6R
zvXpIwf/aPOv832RfHqYe+Skq0TujFNno3AocCsZpHiy1BS9JoaKVBw9O4EecZhu
aWTag7hubNF8XcEE4dZWSwxkl0DNlpdWvRZNbbS/X6KUoS3lNwkVq4nuN2RXgw0p
bUoKuHSpVHSj667+/h+VuslqX0Ef6CAy4pmg6qaCpIlWCYzLX1hQ41pLNtDy0tNp
39d8yjCdbA6ye9vtgemzLqY0GvPs8GS7dDQbGdIhKPiGJOVoxMCsLV48yfhE9JQF
6y7ZMYvYU6oadS5SdLa8IhC9MzZ80MK9cxz9ve3r6Svznv2Ue0mqkfLJXRA1j8gs
6Yg1fecxMQvx75dNMcQvB6eM9r4rOw==
=R/29
-----END PGP SIGNATURE-----
Merge tag 'actions-arm64-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt
Actions Semi ARM64 DT for v5.10:
- Fix the memory region used by pinctrl and sps drivers on the S700 SoC.
The issue is fixed by limiting the address space used by pinctrl driver.
In hardware these two are separate subsystems but the hw engineers somehow
merged the registers space into one. So we now limit the address space with
appropriate offsets for the two drivers.
- Add DMA controller support for S700 SoC. The relevant driver changes are
picked up by DMA Engine mainatainer. The DMA on this SoC can be used for
mem-to-mem and mem-to-peripheral transfers.
* tag 'actions-arm64-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
arm64: dts: actions: Add DMA Controller for S700
arm64: dts: actions: limit address range for pinctrl node
Link: https://lore.kernel.org/r/20200922114030.GC11251@Mani-XPS-13-9360
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add devicetree support for Caninos Loucos Labrador SBC manufactured
by Laboratory of Integrated Technological Systems (LSI-TEC), Brazil.
This board is based on Actions Semi S500 SoC. More information about
this board can be found in their website: https://caninosloucos.org/en/
- Fix PPI interrupt specifiers for peripherals attached to Cortex-A9 CPU
- Add devicetree support for RoseapplePi SBC manufactured by Roseapple Pi
team in Taiwan. This board is based on Actions Semi S500 SoC.
More information about this board can be found in their website:
http://roseapplepi.org/
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAl9prhwACgkQVZ8R5v6R
zvVUKwgAp09Kdu17PUNmoqjujUmkAlANgzW30Z12ear1hSJNEoXV8ZgswAYyeerk
exPQWXEvueDYXXgXiLCjaOI8p/Ukae4wc8eaTyYN7i0JMxGQ1wnpdEI8su1VC+ph
+RuL/mH/dc/pibWMBVIf+YP4mfQz+RCX1+VRHbINKHeMuQ3rCecQ6352GZxkt/EU
3BEr2QpNBvIwMLxllUf51k/ng9w2mtEk+7uDEPJmBtUCbRUWxhq5UexAoUJbPvLU
2f8OpYh4Tbnxl/FLuRYCl0Yhk2bB9600HNhx1enK/P2u3wuJkK1tDlmLZoYOuirc
imx3OrzSnqOtAJBg2chcaY2tq+SUtA==
=PNl0
-----END PGP SIGNATURE-----
Merge tag 'actions-arm-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt
Actions Semi ARM DT for v5.10:
- Add devicetree support for Caninos Loucos Labrador SBC manufactured
by Laboratory of Integrated Technological Systems (LSI-TEC), Brazil.
This board is based on Actions Semi S500 SoC. More information about
this board can be found in their website: https://caninosloucos.org/en/
- Fix PPI interrupt specifiers for peripherals attached to Cortex-A9 CPU
- Add devicetree support for RoseapplePi SBC manufactured by Roseapple Pi
team in Taiwan. This board is based on Actions Semi S500 SoC.
More information about this board can be found in their website:
http://roseapplepi.org/
* tag 'actions-arm-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
ARM: dts: owl-s500: Add RoseapplePi
ARM: dts: owl-s500: Fix incorrect PPI interrupt specifiers
ARM: dts: Add Caninos Loucos Labrador v2
Link: https://lore.kernel.org/r/20200922113712.GB11251@Mani-XPS-13-9360
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add vendor prefix for Roseapple Pi: http://roseapplepi.org/
- Document RoseapplePi SBC manufactured by Roseapple Pi team in Taiwan.
This board is based on Actions Semi S500 SoC. More information about
this board can be found in their website:
http://roseapplepi.org/index.php/spec/
- Add vendor prefix for Caninos Loucos Program:
https://caninosloucos.org/en/program-en/
- Document Caninos Loucos Labrador SBC manufactured by Laboratory of
Integrated Technological Systems (LSI-TEC), Brazil. This board is based
on Actions Semi S500 SoC. More information about this board can be found
in their website: https://caninosloucos.org/en/labrador-32-en/
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAl9ptIAACgkQVZ8R5v6R
zvUtBAgAlxNP6fKleQaWm3s0uFCut7WI0hRHgtVvdykFOSXvY6OehZWEDLVRrs4l
+F1gSCr1PY7RaenAYVOQH2uEpLsXOgB/HXRLm40I6bcma4i7uan/b7vTtsHg9ZQy
h2e/rJTEmwjPWw1gyHsEX/h8PW4OI/F2Cr38ZDwNdpTpylv6tBiWhT4ewxGVMt/Y
ejcOLwxw98iIrg7Zjniolju9L7pog1XhgJJDwRhI8kOvo7wvhstsKuc20dq+eIGD
z/ZjVce+TvLYEc0DpRcDkoWvP39PzZ7wHsaDzMHft9y4X0VxWZES/ogsYmKRXstA
Z2WOkcqYKuVPOzS13r5T2A3xNDjzTQ==
=vQTE
-----END PGP SIGNATURE-----
Merge tag 'actions-bindings-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt
Actions Semi bindings for v5.10
- Add vendor prefix for Roseapple Pi: http://roseapplepi.org/
- Document RoseapplePi SBC manufactured by Roseapple Pi team in Taiwan.
This board is based on Actions Semi S500 SoC. More information about
this board can be found in their website:
http://roseapplepi.org/index.php/spec/
- Add vendor prefix for Caninos Loucos Program:
https://caninosloucos.org/en/program-en/
- Document Caninos Loucos Labrador SBC manufactured by Laboratory of
Integrated Technological Systems (LSI-TEC), Brazil. This board is based
on Actions Semi S500 SoC. More information about this board can be found
in their website: https://caninosloucos.org/en/labrador-32-en/
* tag 'actions-bindings-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
dt-bindings: arm: actions: Document RoseapplePi
dt-bindings: Add vendor prefix for RoseapplePi.org
dt-bindings: arm: actions: Document Caninos Loucos Labrador
dt-bindings: Add vendor prefix for Caninos Loucos
Link: https://lore.kernel.org/r/20200922113408.GA11251@Mani-XPS-13-9360
Signed-off-by: Olof Johansson <olof@lixom.net>
The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
#define INT_MALI_GP AM_IRQ(160)
#define INT_MALI_GP_MMU AM_IRQ(161)
#define INT_MALI_PP AM_IRQ(162)
#define INT_MALI_PMU AM_IRQ(163)
#define INT_MALI_PP0 AM_IRQ(164)
#define INT_MALI_PP0_MMU AM_IRQ(165)
#define INT_MALI_PP1 AM_IRQ(166)
#define INT_MALI_PP1_MMU AM_IRQ(167)
#define INT_MALI_PP2 AM_IRQ(168)
#define INT_MALI_PP2_MMU AM_IRQ(169)
#define INT_MALI_PP3 AM_IRQ(170)
#define INT_MALI_PP3_MMU AM_IRQ(171)
#define INT_MALI_PP4 AM_IRQ(172)
#define INT_MALI_PP4_MMU AM_IRQ(173)
#define INT_MALI_PP5 AM_IRQ(174)
#define INT_MALI_PP5_MMU AM_IRQ(175)
#define INT_MALI_PP6 AM_IRQ(176)
#define INT_MALI_PP6_MMU AM_IRQ(177)
#define INT_MALI_PP7 AM_IRQ(178)
#define INT_MALI_PP7_MMU AM_IRQ(179)
However, the driver from the 3.10 vendor kernel does not use the
following four interrupt lines:
- INT_MALI_PP3
- INT_MALI_PP3_MMU
- INT_MALI_PP7
- INT_MALI_PP7_MMU
Drop the "pp3" and "ppmmu3" interrupt lines. This is also important
because there is no matching entry in interrupt-names for it (meaning
the "pp2" interrupt is actually assigned to the "pp3" interrupt line).
Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: thomas graichen <thomas.graichen@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200815181957.408649-1-martin.blumenstingl@googlemail.com
The board uses lane 3 of SERDES for USB. Set the mux
accordingly.
The USB controller and EVM supports super-speed for USB0
on the Type-C port. However, the SERDES has a limitation
that upto 2 protocols can be used at a time. The SERDES is
wired for PCIe, QSGMII and USB super-speed. It has been
chosen to use PCI2 and QSGMII as default. So restrict
USB0 to high-speed mode.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200930122032.23481-7-rogerq@ti.com
First two lanes of SERDES is connected to PCIe, third lane is
connected to QSGMII and the last lane is connected to USB. However,
Cadence torrent SERDES doesn't support more than 2 protocols
at the same time. Configure it only for PCIe and QSGMII.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200930122032.23481-6-rogerq@ti.com
The USB controller can be connected to one of the 2 lanes
of SERDES0 using a MUX. Add a MUX controller node for that.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200930122032.23481-4-rogerq@ti.com
The SERDES lane control mux registers are present in the
CTRLMMR space.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200930122032.23481-3-rogerq@ti.com
There are 4 lanes in each J7200 SERDES. Each SERDES lane mux can
select upto 4 different IPs. Define all the possible functions.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Cc: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20200930122032.23481-2-rogerq@ti.com
- new boards: libretch s905x cc v2, Hardkernel ODROID-N2+
- vim3: sound updates
-----BEGIN PGP SIGNATURE-----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=vrF9
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dtc: amlogic updates for v5.10
- new boards: libretch s905x cc v2, Hardkernel ODROID-N2+
- vim3: sound updates
* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: initial support for aml-s905x-cc v2
dt-bindings: arm: amlogic: add support for libretch s905x cc v2
arm64: dts: meson: add support for the ODROID-N2+
dt-bindings: arm: amlogic: add support for the ODROID-N2+
arm64: dts: meson: convert ODROID-N2 to dtsi
arm64: dts: meson: vim3l: remove sound card definition
arm64: dts: meson: vim3: make sound card common to all variants
arm64: dts: meson: vim3: correct led polarity
Link: https://lore.kernel.org/r/7h3636kjxd.fsf@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Cleanup, refactor and modernize MSM8916 by sorting nodes, moving device
and platform specific parts to their respective files, add and use
labels for reference nodes and use IRQ defines. Migrate TCSR mutex off
the depricated binding, add resin node for PM8916.
Add LPASS clock controller for SC7180. Fix the LLCC reg, increase
interconnect-cells, drop flags on MDSS irqs. Add interconnects for
display, eMMC and SD-card, specify 'sustainable_power' for CPU thermal
zones, improve pinconf states related to UART and Bluetooth. Add new DT
for Lazor and Trogdor.
Increase #interconnect-cells for SDM845 to allow tags, add OPP tables
and power-domains for Venus and interconnects for display. Fix the ports
on the HDMI nodes for DB845c and add DT for the Xiaomi Poco F1.
Add interconnect providers, fix up primary USB's clock and use
dt-binding defines for GPU clocks on SM8150.
Add interconnect providers, CPUfreq, thermal configuration and missing
uarts for SM8250. Fix up naming of debug uart, add always-on supply
clock to gcc, fix up the sleep clock rate and define OPP tables for all
QUP devices. Then add a new DeviceTree for the QRB5165 RB5 board.
Enable watchdog on IPQ8074 and use the appropriate compatible for the
PMU node. Enable DVFS support for IPQ6018.
Finally correct the spelling of "interrupts" in MSM8992 uart node, fix
missing # in PM660 #interrupt-cells, add second VFE power-domain to
camss in MSM8996 and sort the Makefile.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl9sGmAbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3F7n4QANwKflwOuE+KDK5/SCNb
T7xYWw8ZV1GylHh3E52I42EmpkNDojepBUcjGMy+CZecZzD6cmivKRPu//X6GYzE
MCE+1Z6pUugiDFpcQ2xuY62H1nw+52FeiF9Ze9lITvsKv6nGb+9iVjwU34PXGxuj
uzUCTwqjF/At52zEO+nU0GoN51r3KZgnQEaI/dgTiSV5m0mb8eIG29oq0qB7RTno
mcM8SWcewUHJOJP0/MzdFVE1Vp1MyiL5U7ilKKCCBg5U2Jwzif7Ugv5ZqR3wQ1vD
I3Si9WaLechmCUPWsc6xuysreIdzUrWg37gL+FUdWLj+eWQw6NWjdJDZQM/Zr1DC
XLxHYVliVr164XwTbZOR+JjaJKBOd1b399N8PKGaDYmlHZqP4L81LbfNvB3rkH2o
Y1NuKksicUWt9E6+tAIIceBxBbUW4T2z4FEqwd4edFYxknAk/kr0iVT796Unv9lT
mcsZW7zjN7ob1hqRlUNgPk/u8zASz0/7kGTEyJAbf8Q8MsJSkqvteJpFo0xcVM0W
ty0sC8g7yGgEkuz9Ou5KIXT/5ulinhR+NjoBi1bG8mtgkDnw4k2hyEIpNbuWx5iP
7CjM5ECDV5DK+Q1IXLDyQfrpUIRs9u9QOhoGuNvEztl9q/irJo26m0EEUrIoEgMI
mH/AQkwMrY2x9aXGhtAjOxW9
=yiGd
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for v5.10
Cleanup, refactor and modernize MSM8916 by sorting nodes, moving device
and platform specific parts to their respective files, add and use
labels for reference nodes and use IRQ defines. Migrate TCSR mutex off
the depricated binding, add resin node for PM8916.
Add LPASS clock controller for SC7180. Fix the LLCC reg, increase
interconnect-cells, drop flags on MDSS irqs. Add interconnects for
display, eMMC and SD-card, specify 'sustainable_power' for CPU thermal
zones, improve pinconf states related to UART and Bluetooth. Add new DT
for Lazor and Trogdor.
Increase #interconnect-cells for SDM845 to allow tags, add OPP tables
and power-domains for Venus and interconnects for display. Fix the ports
on the HDMI nodes for DB845c and add DT for the Xiaomi Poco F1.
Add interconnect providers, fix up primary USB's clock and use
dt-binding defines for GPU clocks on SM8150.
Add interconnect providers, CPUfreq, thermal configuration and missing
uarts for SM8250. Fix up naming of debug uart, add always-on supply
clock to gcc, fix up the sleep clock rate and define OPP tables for all
QUP devices. Then add a new DeviceTree for the QRB5165 RB5 board.
Enable watchdog on IPQ8074 and use the appropriate compatible for the
PMU node. Enable DVFS support for IPQ6018.
Finally correct the spelling of "interrupts" in MSM8992 uart node, fix
missing # in PM660 #interrupt-cells, add second VFE power-domain to
camss in MSM8996 and sort the Makefile.
* tag 'qcom-arm64-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (75 commits)
arm64: dts: qcom: sm8250: Add thermal zones and throttling support
arm64: dts: qcom: sm8250: Add cpufreq hw node
arm64: dts: qcom: sdm845: Add interconnects property for display
arm64: dts: qcom: sm8250: Add EPSS L3 interconnect provider
arm64: dts: qcom: sm8150: Add OSM L3 interconnect provider
arm64: dts: qcom: sm8250: add interconnect nodes
arm64: dts: qcom: sm8150: add interconnect nodes
arm64: dts: qcom: sc7180: Increase the number of interconnect cells
arm64: dts: qcom: sdm845: Increase the number of interconnect cells
arm64: dts: qcom: Makefile: Sort lines
arm64: dts: qcom: pm8916: Sort nodes
arm64: dts: qcom: msm8916: Sort nodes
arm64: dts: qcom: msm8916: Pad addresses
arm64: dts: qcom: msm8916: Rename "x-smp2p" to "smp2p-x"
arm64: dts: qcom: msm8916: Use more generic node names
arm64: dts: qcom: msm8916: Add MSM8916-specific compatibles to SCM/MSS
arm64: dts: qcom: msm8916: Minor style fixes
arm64: dts: qcom: msm8916: Drop qcom,tcsr-mutex syscon
arm64: dts: qcom: msm8916: Use IRQ defines, add IRQ types
arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts
...
Link: https://lore.kernel.org/r/20200924040607.180039-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Khadas-edge additions and a some fixes.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl9ryD0QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgU20CACU6tSCmlWEQ2dK3KLavODfcs2GvBpNlUA9
xfoSmMcVbiFosmO7t9gSbJHkIqadMaU/XDZWU/aIcnnPffX3YnCSqRiRWmtw05PG
7kBwHgPOqWhNc9fB7saj/sxth39V/7WKl3qwGuEPUZSDPJ/ZO9008vM0d6kbIQbA
ubZqFZA3fM847Ej5LJgJ1yY2adYPYL5b43b5y6H5Us1nXPt5ONHrSoLhLLeoCVk8
Ds+UdkLeu7zy2fDN4V6jhkEVFPgG2yq+xeDudIsFk1WXWsB7lO8yGdhPwfOrRire
fsK3dGyO8dKvc8rhshTYwEPyJchrIIQsJFdqLBbVKeVW2mHxKtjC
=WETP
-----END PGP SIGNATURE-----
Merge tag 'v5.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New boards NanoPi R2S, A95X-Z2 and more Rock-Pi4 variants.
Khadas-edge additions and a some fixes.
* tag 'v5.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add ir-receiver node to rk3399-khadas-edge
arm64: dts: rockchip: add spiflash node to rk3399-khadas-edge
arm64: dts: rockchip: Add support for FriendlyARM NanoPi R2S
dt-bindings: Add doc for FriendlyARM NanoPi R2S
arm64: dts: rockchip: replace status value "ok" by "okay"
arm64: dts: rockchip: fix cpu-supply for rk3328-evb
arm64: dts: rockchip: add rk3318 A95X Z2 board
dt-bindings: arm: rockchip: add Zkmagic A95X Z2 description
dt-bindings: Add vendor prefix for Shenzhen Zkmagic Technology Co., Ltd.
arm64: dts: rockchip: Add Radxa ROCK Pi 4C support
arm64: dts: rockchip: Add Radxa ROCK Pi 4B support
arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts
dt-bindings: arm: rockchip: Update ROCKPi 4 binding
arm64: dts: rockchip: change spdif fallback compatible on rk3308
arm64: dts: rockchip: Fix power routing to support POE on rk3399-roc-pc
Link: https://lore.kernel.org/r/16010805.MhVyP8KKtY@diego
Signed-off-by: Olof Johansson <olof@lixom.net>
- New board/device support: Librem 5 phone, i.MX8MM DDR4 EVK, Variscite
VAR-SOM-MX8MN SoM and Symphony board.
- Add NWL MIPI DSI controller support for i.MX8MQ.
- Several series from Krzysztof Kozlowski to clean and fix up i.MX8
based device trees according to DT schema.
- A series from Michael Walle to add sl28cpld support for Kontron sl28
device based on LS1028A.
- Add two parameters for Samsung picophy tuning on imx8mm-evk and
imx8mn-evk boards.
- Add more thermal zones for Layerscape SoCs.
- Various random update and minor fix-ups.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl9q8W0UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4AhQf+L6avHelgOvIbZFqv3EJEPsCZgTzQ
ryXDfdC+x5tpWWdd2ulu3XevaNSWpDwrmmNEKr0jqehsRDQz/Q+/H13DZgz9qALy
4vWyd6eY16pY38bTHC+Bf57LsC5scbpwkt/2gdy2oh73p4R0GwrBNp2CLo9ATduw
QoVY9+5AOCilinI0Smqg/a2o1UeDoUSwzfnlEwA6hlx5cR7mla5wM6mRX8DNaFO3
zEes8mpLaWfxWw256NPMUL9RTgVTaAPaR/hboN3DYjoUDSinv+5zxKbJDMavG5Ok
1uG/T0g+XbvQJbOz1CDI4gI0tRgqWAJMtYCjH62m6DXBmajOaUcHi/Il7A==
=XIpX
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree change for 5.10:
- New board/device support: Librem 5 phone, i.MX8MM DDR4 EVK, Variscite
VAR-SOM-MX8MN SoM and Symphony board.
- Add NWL MIPI DSI controller support for i.MX8MQ.
- Several series from Krzysztof Kozlowski to clean and fix up i.MX8
based device trees according to DT schema.
- A series from Michael Walle to add sl28cpld support for Kontron sl28
device based on LS1028A.
- Add two parameters for Samsung picophy tuning on imx8mm-evk and
imx8mn-evk boards.
- Add more thermal zones for Layerscape SoCs.
- Various random update and minor fix-ups.
* tag 'imx-dt64-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (71 commits)
arm64: dts: imx8mq-librem5: correct GPIO hog property
arm64: dts: imx8mm-var-som-symphony: Drop wake-up source from RTC
arm64: dts: imx8mq: correct interrupt flags
arm64: dts: imx8mn: correct interrupt flags
arm64: dts: imx8mm: correct interrupt flags
arm64: dts: imx8mm-var-som-symphony: fix ptn5150 interrupts
arm64: dts: layerscape: correct watchdog clocks for LS1088A
arm64: dts: freescale: sl28: enable fan support
arm64: dts: freescale: sl28: enable LED support
arm64: dts: freescale: sl28: map GPIOs to input events
arm64: dts: freescale: sl28: enable sl28cpld
arm64: dts: imx8mq-evk: Add MIPI DSI support
arm64: dts: layerscape: Add label to pcie nodes
arm64: dts: imx8mn-var-som-symphony: Add Variscite Symphony board with VAR-SOM-MX8MN
arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module
arm64: dts: imx8mn-ddr4-evk: Remove unneeded PMIC pin configuration
arm64: dts: imx8mm-var-som-symphony: Adjust ethernet pin configuration
arm64: dts: imx8mm-var-som-symphony: Remove unneeded i2c3 properties
arm64: dts: imx8mm-var-som-symphony: Drop unused gpioledgrp
arm64: dts: imx8mq-librem5: Add interrupt-names to ti,tps6598x
...
Link: https://lore.kernel.org/r/20200923073009.23678-5-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- New board/device support: Tolino Shine 2 HD, TQMa6 SoM, Y Soft IOTA
Orion board.
- update GPMI NAND node name to nand-controller for aligning with DT
schema.
- Remove the legacy fsl,spi-num-chipselects property from a few board.
- A series to update imx6q-logicpd support, using GPIO chipselect,
adding board compatible string, and enabling DTB build for the board.
- Complete RNG device node in i.MX6SL device tree, and add RNG node for
i.MX6SLL and i.MX6ULL.
- Correct interrupt flags for imx6qdl-gw5xxx boards.
- Add missing enet_out clock for i.MX6Q/DL Ethernet device.
- Enable PCIe support for imx6qp-sabreauto board.
- A series from Shengjiu Wang to add audio sound card for imx7d-sdb and
imx6sll-evk board, add headphone detection for sound card on a few NXP
development boards.
- A couple of minor fix-ups on i.MX25 pin functions.
- Some random update on various boards.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl9qrwoUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7Fqgf/Y+6XGsUY+QHRK6CTglOsDgC43Ixw
mhJkvG7AWcu+2Oz+WLFVbncbcBBy1swrAAss0DlwAB3BXijWiytSz6flPCBHrFiN
pyM1CLhgQChI2JfWRRc1ij/WOHkztnxR7CHLOycdhn8WQLFLQeC6Axox+d22IW4L
NgbR08eq2g2+QjMjHPyGpxnCw7AoGzexCwCLC8ajKTFe16k61bkz5Q2SxXogdlkO
cusfGpdFDme04Fl/T9sWOyIO/+l1qOzDx5JIQHRVnTB8hY7Dl7r7NQYdcvcdYrIj
AR31fXEjioR5C+AYr25ZILowZlS8VyvfTi1ZFHMFG3yD+856AYqCDB40Jw==
=w/3X
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm32 device tree change for 5.10:
- New board/device support: Tolino Shine 2 HD, TQMa6 SoM, Y Soft IOTA
Orion board.
- update GPMI NAND node name to nand-controller for aligning with DT
schema.
- Remove the legacy fsl,spi-num-chipselects property from a few board.
- A series to update imx6q-logicpd support, using GPIO chipselect,
adding board compatible string, and enabling DTB build for the board.
- Complete RNG device node in i.MX6SL device tree, and add RNG node for
i.MX6SLL and i.MX6ULL.
- Correct interrupt flags for imx6qdl-gw5xxx boards.
- Add missing enet_out clock for i.MX6Q/DL Ethernet device.
- Enable PCIe support for imx6qp-sabreauto board.
- A series from Shengjiu Wang to add audio sound card for imx7d-sdb and
imx6sll-evk board, add headphone detection for sound card on a few NXP
development boards.
- A couple of minor fix-ups on i.MX25 pin functions.
- Some random update on various boards.
* tag 'imx-dt-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (37 commits)
ARM: dts: imx6qdl-gw5xxx: correct interrupt flags
ARM: dts: imx6q-logicpd: Use GPIO chipselect
ARM: dts: imx: Add an entry for imx6q-logicpd.dtb
ARM: dts: imx6q-logicpd: Add a specific board compatible string
ARM: dts: imx6q: align GPIO hog names with dtschema
ARM: dts: imx6qdl-tqma6: fix LM75 compatible string
ARM: dts: imx6qdl-tqma6: remove obsolete fsl,spi-num-chipselects
ARM: dts: imx6qdl-tqma6: fix indentation
ARM: dts: imx28-m28: Align GPMI NAND node name with schema
ARM: dts: imx6qdl: add enet_out clk support
ARM: dts: imx6qdl: move iomuxc compatible assignment out of root node
ARM: dts: vf: Fix PCA95xx GPIO expander properties on ZII CFU1
ARM: dts: imx: add devicetree for Tolino Shine 2 HD
ARM: dts: imx6qdl-gw553x: Remove unneeded #address-cells/#size-cells
ARM: dts: imx6sll-evk: Add audio sound card node
ARM: dts: imx6sl-evk: Add headphone detection for sound card
ARM: dts: imx6sx-sdb: Add headphone detection for sound card
ARM: dts: imx6q-kontron-samx6i: Remove old fsl,spi-num-chipselects
ARM: dts: imx: Fix the SPI chipselect polarity
ARM: dts: imx25-pinfunc: Fix GPT function names
...
Link: https://lore.kernel.org/r/20200923073009.23678-4-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Minor cleanups: removal of undocumented I2S properties, alignment of OPP
table node name with dtschema.
-----BEGIN PGP SIGNATURE-----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=RS85
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.10, part two
Minor cleanups: removal of undocumented I2S properties, alignment of OPP
table node name with dtschema.
* tag 'samsung-dt64-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Align OPP table name with dt-schema
arm64: dts: exynos: Remove undocumented i2s properties in Exynos5433
Link: https://lore.kernel.org/r/20200920160705.9651-4-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Further cleanup of DTS with dtschema: s5pv210, s3c6410 and s3c24xx.
This fixes many minor dtschema violations, adds few missing
functionalities (like clock for RTC) and improves the code
maintainability in few places. Except the RTC clock, this should not
have visible impact.
2. Fix few remaining Exynos dtschema violations.
-----BEGIN PGP SIGNATURE-----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=yolB
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.10, part two
1. Further cleanup of DTS with dtschema: s5pv210, s3c6410 and s3c24xx.
This fixes many minor dtschema violations, adds few missing
functionalities (like clock for RTC) and improves the code
maintainability in few places. Except the RTC clock, this should not
have visible impact.
2. Fix few remaining Exynos dtschema violations.
* tag 'samsung-dt-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (36 commits)
ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in Goni
ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in Aquila
ARM: dts: s5pv210: move fixed regulators under root node in Goni
ARM: dts: s5pv210: move fixed regulators under root node in Aquila
ARM: dts: exynos: Align OPP table name with dt-schema
ARM: dts: exynos: move assigned-clock* properties to i2s0 node in Odroid XU4
ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid
ARM: dts: exynos: add input clock to CMU in Exynos3250
ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416
ARM: dts: s3c24xx: add address to CPU node
ARM: dts: s3c24xx: align PWM/timer node name with dtschema
ARM: dts: s3c24xx: override nodes by label
ARM: dts: s3c24xx: fix number of PWM cells
ARM: dts: s3c6410: remove additional CPU compatible
ARM: dts: s3c6410: align node SROM bus node name with dtschema in SMDK6410
ARM: dts: s3c6410: align node SROM bus node name with dtschema in Mini6410
ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410
ARM: dts: s3c6410: move fixed clocks under root node in Mini6410
ARM: dts: s5pv210: correct ethernet unit address in SMDKV210
ARM: dts: s5pv210: align SPI GPIO node name with dtschema in Aries
...
Link: https://lore.kernel.org/r/20200920160705.9651-3-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
This set of changes fixes some minor issues in existing device trees and
adds ID EEPROMs on the Jetson Xavier NX. All ID EEPROMs are now labelled
to allow them to be detected by software.
It also adds support for the Tegra234 VDK board, which is a pre-silicon
platform for the upcoming Orin SoC.
-----BEGIN PGP SIGNATURE-----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=zeT7
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Changes for v5.10-rc1
This set of changes fixes some minor issues in existing device trees and
adds ID EEPROMs on the Jetson Xavier NX. All ID EEPROMs are now labelled
to allow them to be detected by software.
It also adds support for the Tegra234 VDK board, which is a pre-silicon
platform for the upcoming Orin SoC.
* tag 'tegra-for-5.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Initial Tegra234 VDK support
arm64: tegra: Populate EEPROMs for Jetson Xavier NX
arm64: tegra: Add label properties for EEPROMs
arm64: tegra: Add DT binding for AHUB components
arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano
arm64: tegra: Properly size register regions for GPU on Tegra194
arm64: tegra: Use valid PWM period for VDD_GPU on Tegra210
arm64: tegra: Describe display controller outputs for Tegra210
arm64: tegra: Disable SD card write-protection on Jetson Nano
arm64: tegra: Add VBUS supply for micro USB port on Jetson Nano
arm64: tegra: Wire up pinctrl states for all DPAUX controllers
arm64: tegra: Add ID EEPROMs on Jetson AGX Xavier
Link: https://lore.kernel.org/r/20200918150303.3938852-5-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Document core support for the R-Car V3U (R8A779A0) SoC and the
Renesas Falcon CPU and BreakOut boards.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX2SgdwAKCRCKwlD9ZEnx
cMZwAQCE2jD6gvS56pI2k7zDyX5r8mbhHgxXfw2PpHFV1O831QEAjQ9/PET1JbaS
McoeM3Yumhg1vizNqrpmupnb0ujP/Qw=
=VWF0
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v5.10
- Document core support for the R-Car V3U (R8A779A0) SoC and the
Renesas Falcon CPU and BreakOut boards.
* tag 'renesas-dt-bindings-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Document Renesas Falcon boards
dt-bindings: reset: renesas,rst: Document r8a779a0 reset module
dt-bindings: power: renesas,rcar-sysc: Document r8a779a0 SYSC bindings
dt-bindings: arm: renesas: Document R-Car V3U SoC DT bindings
Link: https://lore.kernel.org/r/20200918124800.15555-5-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
- PCIe endpoint support for the RZ/G2H SoC,
- SATA support for the HopeRun HiHope RZ/G2H board,
- Increase support (CAN, LED, SPI NOR, VIN, VSP) for the RZ/G1H SoC on
the iWave Qseven board (G21D), and its camera add-on board,
- Initial support for the R-Car V3U SoC on the Falcon CPU and BreakOut
boards,
- HDMI display and sound support for the R-Car M3-W+ SoC on the
Salvator-XS board,
- Digital Radio Interface (DRIF) support for the R-Car E3 SoC,
- Minor fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX2SkmQAKCRCKwlD9ZEnx
cIXNAP0XqvKJP7xGjQ1ORyePB1nWZtebVqGoQFxpvqwznMNZlAD7BIRlATo4LYpu
LNMya5sk85WAhZNbpkHwR++3/8m+mgE=
=Va2A
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.10 (take two)
- PCIe endpoint support for the RZ/G2H SoC,
- SATA support for the HopeRun HiHope RZ/G2H board,
- Increase support (CAN, LED, SPI NOR, VIN, VSP) for the RZ/G1H SoC on
the iWave Qseven board (G21D), and its camera add-on board,
- Initial support for the R-Car V3U SoC on the Falcon CPU and BreakOut
boards,
- HDMI display and sound support for the R-Car M3-W+ SoC on the
Salvator-XS board,
- Digital Radio Interface (DRIF) support for the R-Car E3 SoC,
- Minor fixes and cleanups.
* tag 'renesas-arm-dt-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (24 commits)
arm64: dts: renesas: r8a774c0: Fix MSIOF1 DMA channels
arm64: dts: renesas: r8a77990: Fix MSIOF1 DMA channels
arm64: dts: renesas: r8a77990: Add DRIF support
ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add can0 support to camera DB
ARM: dts: r8a7742: Add VSP support
arm64: dts: renesas: Drop superfluous pin configuration containers
arm64: dts: renesas: r8a77961: salvator-xs: Add HDMI Sound support
arm64: dts: renesas: r8a77961: salvator-xs: Add HDMI Display support
arm64: dts: renesas: r8a77961: Add HDMI device nodes
arm64: dts: renesas: r8a77961: Add DU device nodes
arm64: dts: renesas: r8a77961: Add VSP device nodes
arm64: dts: renesas: r8a77961: Add FCP device nodes
arm64: dts: renesas: Fix pin controller node names
ARM: dts: renesas: Fix pin controller node names
arm64: dts: renesas: Add Renesas Falcon boards support
arm64: dts: renesas: Add Renesas R8A779A0 SoC support
ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indication
ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier board
ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR support
ARM: dts: r8a7742: Add VIN DT nodes
...
Link: https://lore.kernel.org/r/20200918124800.15555-2-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
The Synopsys DesignWare APB GPIO controller port must have gpio-cells
property, as pointed by dtschema:
arch/arm64/boot/dts/apm/apm-mustang.dt.yaml: gpio@1c024000: gpio-controller@0: '#gpio-cells' is a required property
Link: https://lore.kernel.org/r/20200917165040.22908-2-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The Synopsys DesignWare APB GPIO controller driver does not parse
reg-io-width and dtschema does not allow it so drop it to fix dtschema
warnings like:
arch/arm64/boot/dts/apm/apm-mustang.dt.yaml: gpio@1c024000:
'reg-io-width' does not match any of the regexes: '^gpio-(port|controller)@[0-9a-f]+$', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20200917165040.22908-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The Synopsys DesignWare APB GPIO controller driver does not parse
reg-io-width and dtschema does not allow it so drop it to fix dtschema
warnings like:
arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dt.yaml: gpio@20000:
'reg-io-width' does not match any of the regexes: '^gpio-(port|controller)@[0-9a-f]+$', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20200917164909.22490-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add the s6e63m0 display to the Golden device
- Add the KTD253 backlight to the Skomer device
- Update the LP5521 LED DTS entries for binding changes
-----BEGIN PGP SIGNATURE-----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=jwb5
-----END PGP SIGNATURE-----
Merge tag 'ux500-dts-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt
Ux500 DTS updates for the v5.10 kernel cycle:
- Add the s6e63m0 display to the Golden device
- Add the KTD253 backlight to the Skomer device
- Update the LP5521 LED DTS entries for binding changes
* tag 'ux500-dts-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
ARM: dts: ux500-skomer: Add KTD253 backlight
ARM: dts: ux500-golden: Add S6E63M0 DSI display
Link: https://lore.kernel.org/r/CACRpkda=-cgFjN7K2vBU5x4uSYrohrZSbjqMnSFb3Qe2Az1W5g@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add public repo to MAINTAINERS
- Add SPI controller and devices
- Add eMMC controller and devices
- Add temperature sensor
-----BEGIN PGP SIGNATURE-----
iJEEABYIADkWIQQaBzOicklHovJvajA3MaYaSgcc9AUCX2HdrxscbGFycy5wb3Zs
c2VuQG1pY3JvY2hpcC5jb20ACgkQNzGmGkoHHPSyFgD8CeApRk+Nft2RMt72TyLW
A/sGGCdqnhQqp7Sswpf625wA/idFqzcEfwQNVar29MBJ3A6Uu213DK4b/lnkw9cm
Mg4E
=Ln9n
-----END PGP SIGNATURE-----
Merge tag 'sparx5-dt-5.10' of https://github.com/microchip-ung/linux-upstream into arm/dt
Sparx5 DT updates for Linux 5.10
- Add public repo to MAINTAINERS
- Add SPI controller and devices
- Add eMMC controller and devices
- Add temperature sensor
* tag 'sparx5-dt-5.10' of https://github.com/microchip-ung/linux-upstream:
arm64: dts: sparx5: Add spi-nand devices
arm64: dts: sparx5: Add spi-nor support
arm64: dts: sparx5: Add SPI controller and associated mmio-mux
MAINTAINERS: Add git tree for Sparx5
arm64: dts: sparx5: Add hwmon temperature sensor
arm64: dts: sparx5: Add Sparx5 eMMC support
Link: https://lore.kernel.org/r/878sda2dj0.fsf@microchip.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Update the SP804 nodes to have the correct clocks and
clock names for the hi3620 SoC
- Update the SP805 nodes to have the correct clocks and
clock names for the hix5hd2 SoC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WbPu
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm32-dt-for-5.10' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM: DT: Hisilicon ARM32 SoCs DT updates for 5.10
- Update the SP804 nodes to have the correct clocks and
clock names for the hi3620 SoC
- Update the SP805 nodes to have the correct clocks and
clock names for the hix5hd2 SoC
* tag 'hisi-arm32-dt-for-5.10' of git://github.com/hisilicon/linux-hisi:
ARM: dts: hisilicon: Fix SP805 clocks
ARM: dts: hisilicon: Fix SP804 users
Link: https://lore.kernel.org/r/5F617209.90003@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Change the status properties from "ok" to "okay" for
all the hisilicon SoCs
- Update the SP805 nodes to have the correct clocks and
clock names for the hi3660 and hi6220 SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=/Wrz
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-5.10' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon ARM64 SoCs DT updates for 5.10
- Change the status properties from "ok" to "okay" for
all the hisilicon SoCs
- Update the SP805 nodes to have the correct clocks and
clock names for the hi3660 and hi6220 SoCs
* tag 'hisi-arm64-dt-for-5.10' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: Fix SP805 clocks
arm64: dts: hisilicon: replace status value "ok" by "okay"
Link: https://lore.kernel.org/r/5F617134.3050705@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The convention for node names is to use hyphens, not underscores.
dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20200916155715.21009-7-krzk@kernel.org
Add support for the eMMC and SD card connected on the common
processor board
sdhci0 is connected to an eMMC while sdhci1 is connected to the
micro SD slot.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Link: https://lore.kernel.org/r/20200924112644.11076-3-faiz_abbas@ti.com
Add support for MMC/SD controller nodes present on TI's j7200 SoCs.
There are two nodes:
1. sdhci0 (8 bit bus width, 200 MHz, HS200, 200 MBps)
2. sdhci1 (4 bit bus width, 50 MHz, HS, 25 MBps)
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Link: https://lore.kernel.org/r/20200924112644.11076-2-faiz_abbas@ti.com
J7200 SoM has a HyperFlash connected to HyperBus memory controller. But
HyperBus is muxed with OSPI, therefore keep HyperBus node disabled.
Bootloader will detect the mux and enable the node as required.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Link: https://lore.kernel.org/r/20200923163150.16973-3-vigneshr@ti.com
J7200 has a Flash SubSystem that has one OSPI and one HyperBus.. Add
DT nodes for HyperBus controller for now.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Link: https://lore.kernel.org/r/20200923163150.16973-2-vigneshr@ti.com
Add DT nodes for I2C GPIO expanders on main_i2c0 and main_i2c1 and
also add the pinmux corresponding to these I2C instances.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Faiz Abbas <faiz_abbas@ti.com>
Link: https://lore.kernel.org/r/20200923155400.13757-3-vigneshr@ti.com
J7200 has 7 I2Cs in main domain, 2 I2Cs in MCU and 1 in wakeup domain.
Add DT nodes for the same.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Faiz Abbas <faiz_abbas@ti.com>
Link: https://lore.kernel.org/r/20200923155400.13757-2-vigneshr@ti.com
Olof Johansson
Martin Blumenstingl
Roger Quadros
Kishon Vijay Abraham I
Nishanth Menon
Krzysztof Kozlowski
Faiz Abbas
Vignesh Raghavendra