IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Currently, we take the max lane, rate and pipe bpp, to get the maximum
compressed bpp possible. We then set the output bpp to this value.
This patch provides support to have max bpp, min rate and min lanes,
that can support the min compressed bpp.
v2:
-Avoid ending up with compressed bpp, same as pipe bpp. (Stan)
-Fix the checks for limits->max/min_bpp while iterating over list of
valid DSC bpcs. (Stan)
v3:
-Refactor the code to have pipe bpp/compressed bpp computation and slice
count calculation separately for different cases.
v4:
-Separate the pipe_bpp calculation for eDP and DP.
v5:
-Get rid of magic numbers for max and min bpp,
and improve documentation. (Stan).
-Use functions for {src_sink}_{min_max}_compressed_bpp (Ville).
v6:
-Remove lines to set link config to max.
v7:
-Split the part to separate edp and dp functions for computing DSC BPP
into separate patch.
v8:
-Separate mechanism to get compressed bpp for ICL,TGL and XELPD+.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-17-ankit.k.nautiyal@intel.com
Currently we check if the pipe_bpp selected is >= the
min DSC bpc/bpp requirement. We do not check if it is <= the max DSC
bpc/bpp requirement.
Add checks for max DSC BPC/BPP constraints while computing the
pipe_bpp when DSC is in use.
v2: Fix the commit message.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-15-ankit.k.nautiyal@intel.com
Refactor code to separate functions for eDP and DP for computing
pipe_bpp/compressed bpp when DSC is involved.
This will help to optimize the link configuration for DP later.
v2: Fix checkpatch warning.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-14-ankit.k.nautiyal@intel.com
The helper intel_dp_dsc_compute_bpp gives the maximum
pipe bpp that is allowed with DSC.
Rename the this to reflect that it returns max pipe bpp supported
with DSC.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-13-ankit.k.nautiyal@intel.com
For DSC the min BPC is 8 for ICL+ and so the min pipe_bpp is 24.
Check this condition for cases where bpc is forced by debugfs flag
dsc_force_bpc. If the check fails, then WARN and ignore the debugfs
flag.
For MST case the pipe_bpp is already computed (hardcoded to be 24),
and this check is not required.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-11-ankit.k.nautiyal@intel.com
Separate out functions for getting maximum and minimum input BPC based
on platforms, when DSC is used.
v2: Use HAS_DSC macro instead of platform check while getting min input
bpc. (Stan)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-10-ankit.k.nautiyal@intel.com
For MST the bpc is hardcoded to 8, and pipe bpp to 24.
So avoid forcing DSC bpc for MST case.
v2: Warn and ignore the debug flag than to bail out. (Jani)
v3: Fix dbg message to mention forced bpc instead of bpp.
v4: Fix checkpatch longline warning.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-9-ankit.k.nautiyal@intel.com
As per Bsepc:49259, Bigjoiner BW check puts restriction on the
compressed bpp for a given CDCLK, pixelclock in cases where
Bigjoiner + DSC are used.
Currently compressed bpp is computed first, and it is ensured that
the bpp will work at least with the max CDCLK freq.
Since the CDCLK is computed later, lets account for Bigjoiner BW
check while calculating Min CDCLK.
v2: Use pixel clock in the bw calculations. (Ville)
v3: Use helper to account for FEC overhead. (Stan)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-7-ankit.k.nautiyal@intel.com
In Bigjoiner check for DSC, bigjoiner interface bits for DP for
DISPLAY > 13 is 36 (Bspec: 49259).
v2: Corrected Display ver to 13.
v3: Follow convention for conditional statement. (Ville)
v4: Fix check for display ver. (Ville)
v5: Added note for 2 PPC. (Stan)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-6-ankit.k.nautiyal@intel.com
Currently there are many places where we use output_bpp for link bpp and
compressed bpp.
Lets use consistent naming:
output_bpp : The intermediate value taking into account the
output_format chroma subsampling.
compressed_bpp : target bpp for the DSC encoder.
link_bpp : final bpp used in the link.
For 444 sampling without DSC:
link_bpp = output_bpp = pipe_bpp
For 420 sampling without DSC:
output_bpp = pipe_bpp / 2
link_bpp = output_bpp
For 444 sampling with DSC:
output_bpp = pipe_bpp
link_bpp = compressed_bpp, computed with output_bpp (i.e. pipe_bpp in
this case)
For 420 sampling with DSC:
output_bpp = pipe_bpp/2
link_bpp = compressed_bpp, computed with output_bpp
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-5-ankit.k.nautiyal@intel.com
The final link bpp used to calculate the m_n values depend on the
output_format. Though the output_format is set to RGB for MST case and
the link bpp will be same as the pipe bpp, for the sake of semantics,
lets calculate the m_n values with the link bpp, instead of pipe_bpp.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-4-ankit.k.nautiyal@intel.com
While using DSC the compressed bpp is computed assuming RGB output
format. Consider the output_format and compute the compressed bpp
during mode valid and compute config steps.
For DP-MST we currently use RGB output format only, so continue
using RGB while computing compressed bpp for MST case.
v2: Use output_bpp instead for pipe_bpp to clamp compressed_bpp. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-2-ankit.k.nautiyal@intel.com
We don't really need a feature flag for has_4tile since there's a
well-defined cutover point (DG2) at which all new platforms started
using Tile4 as their Y-major tiling layout. The GT side of the code
already handles Tile4 vs legacy TileY with checks on the IP version
rather than looking at the feature flag, and we can simplify the display
code similarly (which will also make it more self-contained for re-use
in the Xe driver).
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230810234618.3738870-4-matthew.d.roper@intel.com
Rather than picking random tiling formats from a pool that contains both
TileY and Tile4 and then trying to replace one with the other depending
on the platform, it's simpler to just use a single enum value that
represents whatever the platform-appropriate Y-major tiling format is
(i.e., Tile4 on Xe_HP and beyond, legacy TileY on earlier platforms).
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230810234618.3738870-3-matthew.d.roper@intel.com
All production DG2 cards have display stepping C0 or later. We can drop
Wa_14013215631 (only applies to pre-C0) and make Wa_14010547955
unconditional (applies to everything B0 and beyond). Also drop the
now-unused IS_DG2_DISPLAY_STEP macro.
Bspec: 44477
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816214201.534095-9-matthew.d.roper@intel.com
The first production SoC steppings for DG2 were C0 (for G10), B1 (for
G11), and A1 (for G12). This corresponds to PCI revision IDs 0x8, 0x5,
and 0x1 respectively. Add this information to the driver's
pre-production detection.
Bspec: 44477
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816214201.534095-8-matthew.d.roper@intel.com
According to the BSpec, voltage swing programming should be done for
owned PHY lanes. Do not program a not-owned PHY lane.
BSpec: 74103, 74104
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814131331.69516-5-gustavo.sousa@intel.com
It is possible to generalize the "disable" value for the transmitters to
be a bit mask based on the port width and the port reversal boolean,
with a small exception for DP-alt mode with "x1" port width.
Simplify the code by using such a mask and a for-loop instead of using
switch-case statements.
v2:
- Use (i < 2) instead of (i / 2 == 0) for PHY lane mask selection.
(Jani)
BSpec: 64539
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814131331.69516-3-gustavo.sousa@intel.com
There are more parts of C10/C20 programming that need to take owned
lanes into account. Define the function intel_cx0_get_owned_lane_mask()
and use it. There will be new users of that function in upcoming
changes.
BSpec: 64539
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814131331.69516-2-gustavo.sousa@intel.com
System wide suspend already has support for lmem save/restore during
suspend therefore enabling d3cold for s2idle and keepng it disable for
runtime PM.(Refer below commit for d3cold runtime PM disable justification)
'commit 66eb93e71a7a ("drm/i915/dgfx: Keep PCI autosuspend control
'on' by default on all dGPU")'
It will reduce the DG2 Card power consumption to ~0 Watt
for s2idle power KPI.
v2:
- Added "Cc: stable@vger.kernel.org".
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8755
Cc: stable@vger.kernel.org
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Jianshui Yu <Jianshui.yu@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816125216.1722002-1-anshuman.gupta@intel.com
That macro became unused with commit 323286c81245 ("drm/i915: Move the
power domain->well mappings to intel_display_power_map.c").
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230815201344.298573-1-gustavo.sousa@intel.com
After recent discussions with Mesa folks, it was requested
that we optimize i915's GET_PARAM for the PXP_STATUS without
changing the UAPI spec.
Add these additional optimizations:
- If any PXP initializatoin flow failed, then ensure that
we catch it so that we can change the returned PXP_STATUS
from "2" (i.e. 'PXP is supported but not yet ready')
to "-ENODEV". This typically should not happen and if it
does, we have a platform configuration issue.
- If a PXP arbitration session creation event failed
due to incorrect firmware version or blocking SOC fusing
or blocking BIOS configuration (platform reasons that won't
change if we retry), then reflect that blockage by also
returning -ENODEV in the GET_PARAM:PXP_STATUS.
- GET_PARAM:PXP_STATUS should not wait at all if PXP is
supported but non-i915 dependencies (component-driver /
firmware) we are still pending to complete the init flows.
In this case, just return "2" immediately (i.e. 'PXP is
supported but not yet ready').
Difference from prio revs:
v3: - Rebase with latest tip that has pulled in setting the
gsc fw load to fail if proxy init fails.
v2: - Use a #define for the default readiness timeout (Vivaik).
- Improve comments around the failing of proxy-init.
v1: - Change the commit msg style to be imperative. (Jani)
- Rename timeout to timeout_ms. (Jani)
- Fix is_fw_err_platform_config to use higher order
param (pxp) first. (Jani)
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Balasubrawmanian, Vivaik <vivaik.balasubrawmanian@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802182550.1592926-1-alan.previn.teres.alexis@intel.com
In the case of failed suspend flow or cases where the kernel does not go
into full suspend but goes from suspend_prepare back to resume_complete,
we get called for a pm_complete but without runtime_pm guaranteed.
Thus, ensure we take the runtime_pm when calling intel_pxp_init_hw
from within intel_pxp_resume_complete.
v2: resume_complete and runtime_resume should abstract a common
helper with different wakeref requirements. (Daniele)
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802190611.1639371-1-alan.previn.teres.alexis@intel.com
The debug print for enabling SDP CRC16 is applicable only for DP2.0, but
this debug print was not within the uhbr check and was always printed.
Fix this by adding proper checks and returning.
v2: Fix typo in commit message (Ankit)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230808042000.3210715-1-arun.r.murthy@intel.com
On checking DSC1.1 Errata and DSC 1.2 spec the current formula
we were using was incorrect to calculate first_line_bpg_offset.
The new fixed formula is derived from C model.
--v2
-Use clamp function in linux/minmax.h [Ankit]
--v3
-remove linux/minmax.h header
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804083737.3844575-1-suraj.kandpal@intel.com
As described in the previous patch a connector shouldn't change its
status while it's forced to a connected/disconnected state. This can
still happen while running the connector detect function to account for
lost HPD events in a low-power state.
Fix this by reusing the connector detect function which handles a
hotplug event and prevents updating the status for forced connectors as
expected.
Testcase: igt@kms_force_connector_basic@force-connector-state
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809104307.1218058-3-imre.deak@intel.com
DRM display connectors forced to a connected/disconnected state via the
drm_connector::force member shouldn't change their status. Atm, this can
still happen in the connector's detect function when called to handle a
hotplug event. This in turn may lead to the GETCONNECTOR ioctl to report
the incorrect state if it's called to return the connector properties
without doing an actual detection (by calling the ioctl with a non-zero
drm_mode_get_connector::count_modes).
Fix the above by updating the connector state during hotplug detect only
if the connector state is not forced.
Testcase: igt@kms_force_connector_basic@force-connector-state
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809104307.1218058-2-imre.deak@intel.com
The issue fixed in
commit a8ddac7c9f06 ("drm/i915: Avoid HPD poll detect triggering a new detect cycle")
on VLV, CHV is still present on platforms where the display hotplug
detection functionality is available whenever the device is in D0 state
(hence these platforms switch to HPD polling only when the device is
runtime suspended).
The above commit avoids an endless i915_hpd_poll_init_work() ->
connector detect loop by making sure that by the end of
i915_hpd_poll_init_work() all display power references acquired by the
connector detect functions which can trigger a new cycle (display core
power domain) are dropped. However on platforms where HPD polling is
enabled/disabled only from the runtime suspend/resume handlers, this is
not ensured: for instance eDP VDD, TypeC port PHYs and the runtime
autosuspend delay may still keep the device runtime resumed (via a power
reference acquired during connector detection and hence result in an
endless loop like the above).
Solve the problem described in the above commit on all platforms, by
making sure that a i915_hpd_poll_init_work() -> connector detect
sequence can't take any power reference in the first place which would
trigger a new cycle, instead of relying on these power references to be
dropped by the end of the sequence.
With the default runtime autosuspend delay (10 sec) this issue didn't
happen in practice, since the device remained runtime resumed for the
whole duration of the above sequence. CI/IGT tests however set the
autosuspend delay to 0, which makes the problem visible, see References:
below.
Tested on GLK, CHV.
v2: Don't warn about a requeued work, to account for disabling
polling directly during driver loading, reset and system resume.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7940#note_1997403
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809104307.1218058-1-imre.deak@intel.com
Unify on making the calls from display code. Need to add an if ladder in
gen8_de_irq_postinstall() for now, but the function looks like it could
be overall be better split by platform. Something for the future.
The display version check for mtp seems a bit suspect, but this matches
current code.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fe51744aec9e2f465caf0d699b8a15591859f89e.1691509966.git.jani.nikula@intel.com
When intel_display_device_probe() (and, subsequently,
probe_gmdid_display()) returns, the caller expects ver, rel and step
to be initialized. Since there's no way to check that there was a
failure and no_display was returned without some further refactoring,
pre-initiliaze all these values to zero to keep it simple and safe.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230601090338.80284-1-luciano.coelho@intel.com
Driver refers to the platform Alderlake P as ADLP in places
and ALDERLAKE_P in some. Making the consistent change
to avoid confusion of the right naming convention for
the platform.
v2:
- Unrolled wrapper IS_ADLP_GRAPHICS_STEP and Replace
- Added IS_ALDERLAKE_P() && IS_GRAPHICS_STEP() (Jani/Tvrtko).
v3:
- Removed unused macros of display steps.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801135344.3797924-11-dnyaneshwar.bhadane@intel.com
