IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The xe_rtp_process() function and xe_rtp_entry depend on the
save-restore struct. In future it will be desired to process rtp rules,
regardless of adding them to a save-restore. Rename the struct and
function so the intent is clear and the name is freed for future uses.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230526164358.86393-5-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now that rule_matches() always has an xe pointer, replace the XE_WARN_ON
with the more appropriate drm_warn().
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230526164358.86393-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The selection between hwe and gt is exposed to the outside of rtp, by
the xe_rtp_process() function. However it doesn't make seense from the
caller point of view to pass a hwe and a gt as argument since the gt
should always be the one containing the hwe.
This clarifies the interface by separating the context creation into an
initializer. The initializer then passes the correct value and there
should never be a case with hwe and gt set: when hwe is passed, the gt
is the one containing it. Internally the functions continue receiving
the argument separately.
v2: Leave the device-only context to a separate patch if they are indeed
needed later
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230526164358.86393-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It was missing one digit, so not showing up as a proper WA number. Add
the missing number and annotate it with a FIXME as there are more to be
implemented to consider this WA done: ensure CS is stop before doing a
reset, wait for pending.
Also, this WA applies to platforms up to graphics version 1270 (with the
exception of MTL A*, that are not supported in xe). Fix platform check.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/284
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230526164358.86393-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Generally !has_flatccs implies that a platform has AuxCCS compression
and thus needs to invalidate the AuxCCS TLB. However PVC is a special
case because it has no compression of either type (FlatCCS or AuxCCS)
so we should avoid writing to non-existent AuxCCS registers.
Reviewed-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Link: https://lore.kernel.org/r/20230524192635.673293-1-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Padding and reserved fields are declared such that they must be
zeroed, so verify that they're all zero in the respective ioctl
functions.
Derived from original patch by mlankhorst.
v2:
Removed extensions checks where there were none originally. (José)
Moved extraneous parentheses to the correct places. (Lucas)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pad the uAPI definition so that it would align identically between
64-bit and 32-bit uarch, so consumers using this header will work
correctly from 32-bit compat userspace on a 64-bit kernel. Do it
in a minimally invasive way, so that 64-bit userspace will still
work with the previous header, and so that no fields suddenly
change sizes.
Originally inspired by mlankhorst.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The iommu_dma_map_sg() function ensures iova allocation doesn't
cross dma segment boundary. It does so by padding some sg elements.
This can cause overflow, ending up with sg->length being set to 0.
Avoid this by halving the maximum segment size (rounded down to
PAGE_SIZE).
Specify maximum segment size for sg elements by using
sg_alloc_table_from_pages_segment() to allocate sg_table.
v2: Use correct max segment size in dma_set_max_seg_size() call
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Bruce Chang <yu.bruce.chang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For platforms with GMD_ID registers, the IP stepping should be
determined from the 'revid' field of those registers rather than from
the PCI revid.
The hardware teams have indicated that they plan to keep the revid =>
stepping mapping consistent across all GMD_ID platforms, with major
steppings (A0, B0, C0, etc.) having revids that are multiples of 4, and
minor steppings (A1, A2, A3, etc.) taking the intermediate values. For
now we'll trust that hardware follows through on this plan; if they have
to change direction in the future (e.g., they wind up needing something
like an "A4" that doesn't fit this scheme), we can add a GMD_ID-based
lookup table when the time comes.
v2:
- Set xe->info.platform before finding stepping; the pre-GMD_ID code
relies on this value to pick a lookup table.
v3:
- Also set xe->info.subplatform before picking the stepping for
pre-GMD_ID lookup.
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20230524185952.666158-1-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Let's make sure we give the driver a valid workqueue.
While at it, also make sure to call destroy_workqueue() only if the
workqueue is a valid one. That is necessary because xe_device_destroy()
is indirectly called as part of the cleanup process of a failed
xe_device_create().
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230518215651.502159-3-gustavo.sousa@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Otherwise no cleanup is actually done if we branch to err_put.
This works for now: currently we do know that, once inside
xe_device_destroy(), ttm_device_init() was successful so we can safely
call ttm_device_fini(); and, for xe->ordered_wq, there is an upcoming
commit to check its value before calling destroy_workqueue().
However, we might need change this in the future if we have more
initializers called that can fail in a way that we can not know which
one was it once inside xe_device_destroy().
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230518215651.502159-2-gustavo.sousa@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The function drm_dev_put() should also be called if xe_device_probe()
fails.
v2:
- Improve commit message. (Lucas)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230519194802.578182-1-gustavo.sousa@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
drivers/gpu/drm/xe/xe_guc_submit_types.h:47: warning: cannot understand
function prototype: 'struct guc_submit_parallel_scratch '
drivers/gpu/drm/xe/xe_devcoredump_types.h:38: warning: Function
parameter or member 'ct' not described in 'xe_devcoredump_snapshot'
CI doesn't appear to be running BAT anymore, assuming this is caused by
the CI.Hooks now failing due to above warnings.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Both GUC_HOST_INTERRUPT and MED_GUC_HOST_INTERRUPT can pass
additional payload data to the GuC but this capability is not
used by the firmware yet.
Stop using value mandated by legacy GuC interrupt register and
use default notify value (zero) instead.
Bspec: 49813, 63363
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This GuC register can be moved together with the rest of the
GuC register definitions and be named in a similar way.
v2: fix placement
Bspec: 63363
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> #v1
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There are multiple kind of config prints and with the upcoming
devcoredump there will be another layer. Let's limit the config
to the top level functions and leave the clean-up work for the
compilers so we don't create a spider-web of configs.
No functional change. Just a preparation for the devcoredump.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Let's continue to add our existent simple logs to devcoredump one
by one. Any format change should come on follow-up work.
v2: remove unnecessary, and now duplicated, dma_fence annotation. (Matthew)
v3: avoid for_each with faulty_engine since that can be already freed at
the time of the read/free. Instead, iterate in the full array of
hw_engines. (Kasan)
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
The goal is to allow for a snapshot capture to be taken at the time
of the crash, while the print out can happen at a later time through
the exposed devcoredump virtual device.
v2: Addressing these Matthew comments:
- Handle memory allocation failures.
- Do not use GFP_ATOMIC on cases like debugfs prints.
- placement of @reg doc.
- identation issues.
v3: checkpatch
v4: Rebase and get back to GFP_ATOMIC only.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Let's start to move our existent logs to devcoredump one by
one. Any format change should come on follow-up work.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
The goal is to allow for a snapshot capture to be taken at the time
of the crash, while the print out can happen at a later time through
the exposed devcoredump virtual device.
v2: Handle memory allocation failures. (Matthew)
Do not use GFP_ATOMIC on cases like debugfs prints. (Matthew)
v3: checkpatch
v4: pending_list allocation needs to be atomic because of the
spin_lock. (Matthew)
get back to GFP_ATOMIC only. (lockdep).
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
These structs and definitions are only used for the guc_submit
and they were added specifically for the parallel submission.
While doing that also delete the unused struct guc_wq_item.
v2: checkpatch fixes.
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Let's start to move our existent logs to devcoredump one by
one. Any format change should come on follow-up work.
v2: Rebase and add the dma_fence locking annotation here.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
The goal is to allow for a snapshot capture to be taken at the time
of the crash, while the print out can happen at a later time through
the exposed devcoredump virtual device.
v2: Handle memory allocation failures. (Matthew)
Do not use GFP_ATOMIC on cases like debugfs prints. (Matthew)
v3: checkpatch fixes
v4: Do not use atomic in the g2h_worker_func (Matthew)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
No functional change here. The goal is to have a clear split between
the mapped portions of the CTB and the static information, so we can
easily capture snapshots that will be used for later read out with
the devcoredump infrastructure.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Unfortunately devcoredump infrastructure does not provide and
interface for us to force the device removal upon the pci_remove
time of our device.
The devcoredump is linked at the device level, so when in use
it will prevent the module removal, but it doesn't prevent the
call of the pci_remove callback. This callback cannot fail
anyway and we end up clearing and freeing the entire pci device.
Hence, after we removed the pci device, we shouldn't allow any
read or free operations to avoid segmentation fault.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
The goal is to use devcoredump infrastructure to report error states
captured at the crash time.
The error state will contain useful information for GPU hang debug, such
as INSTDONE registers and the current buffers getting executed, as well
as any other information that helps user space and allow later replays of
the error.
The proposal here is to avoid a Xe only error_state like i915 and use
a standard dev_coredump infrastructure to expose the error state.
For our own case, the data is only useful if it is a snapshot of the
time when the GPU crash has happened, since we reset the GPU immediately
after and the registers might have changed. So the proposal here is to
have an internal snapshot to be printed out later.
Also, usually a subsequent GPU hang can be only a cause of the initial
one. So we only save the 'first' hang. The dev_coredump has a delayed
work queue where it remove the coredump and free all the data within a
few moments of the error. When that happens we also reset our capture
state and allow further snapshots.
Right now this infra only print out the time of the hang. More information
will be migrated here on subsequent work. Also, in order to organize the
dump better, the goal is to propose dev_coredump changes itself to allow
multiple files and different controls. But for now we start Xe usage of
it without any dependency on dev_coredump core changes.
v2: Add dma_fence annotation for capture that might happen during long
running. (Thomas and Matt)
Use xe->drm.primary->index on drm_info msg. (Jani)
v3: checkpatch fixes
v4: Fix building and locking issues found by Francois.
Actually let's kill all of the locking in here. gt_reset serialization
already guarantee that there will be only one capture at the same time.
Also, the devcoredump has its own locking to protect the free and reads
and drivers don't need to duplicate it.
Besides this, the dma_fence locking was pushed to a following patch
since it is not needed in this one.
Fix a use after free identified by KASAN: Do not stash the faulty_engine
since that will be freed somewhere else.
v5: Fix Uptime - ktime_get_boottime actually returns the Uptime. (Francois)
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
While debugging GT related problems, it's good to know which GT was
reporting problems. Introduce helper macros to allow prefix GT logs
with GT identifier. We will use them in upcoming patches.
v2: use xe_ prefix (Lucas)
v3: use correct include
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is allowed and encouraged by the dma-fencing rules. This along with
allowing compute VMs to export dma-fences on binds will result in a
simpler compute UMD.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Binds are not long running jobs thus we can export dma-fences even if a
VM is in compute mode.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Move xe_register_pci_driver() and xe_unregister_pci_driver() to
init_funcs to make sure that exit functions are also called when
xe_register_pci_driver() fails.
Note that this also allows adding init functions to be run after
xe_register_pci_driver().
v2:
- Move functions to init_funcs instead of having a special case for
xe_register_pci_driver(). (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There is not much of a benefit from using that macro as of now and it
hurts grepability or other ways of cross-referencing.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Alderlake P uses TGL HuC and it was not added together with ADL-S,
because it was failing for unrelated reasons. Now that those are fixed,
allow it to load HuC.
# cat /sys/kernel/debug/dri/0/gt0/uc/huc_info
HuC firmware: i915/tgl_huc.bin
status: RUNNING
version: wanted 0.0, found 7.9
uCode: 589504 bytes
RSA: 256 bytes
HuC status: 0x00090001
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://lore.kernel.org/r/20230512233649.3218736-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
ADL-N is pretty much the same as ADL-P (i.e., Xe_LP graphics + Xe_M
media + Xe_LPD display). However unlike ADL-P, there's no GuC hwconfig
support so the "tgl" GuC firmware should be loaded (i.e., the same
situation as ADL-S).
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com>
Link: https://lore.kernel.org/r/20230419213703.3993439-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Setup the mapping from PCI revid to IP stepping for ADL-P (and its RPL-P
subplatform) in case this information becomes important for implementing
workarounds.
Bspec: 55376
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230419213703.3993439-1-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Checking seqno_recv >= seqno looks like it will incorrectly report true
when the seqno has wrapped (not unlikely given
TLB_INVALIDATION_SEQNO_MAX). Calling xe_gt_tlb_invalidation_wait() might
then return before the flush has been completed by the GuC.
Fix this by treating a large negative delta as an indication that the
seqno has wrapped around. Similar to how we treat a large positive delta
as an indication that the seqno_recv must have wrapped around, but in
that case the seqno has likely also signalled.
It looks like we could also potentially make the seqno use the full
32bits as supported by the GuC.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fix the indent to align with open parenthesis, following the coding
style.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230508225322.2692066-5-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Rename the address field to "addr" rather than "reg" so it's easier to
understand what it is.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230508225322.2692066-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Convert all the callers to deal with xe_mmio_*() using struct xe_reg
instead of plain u32. In a few places there was also a rename
s/reg/reg_val/ when dealing with the value returned so it doesn't get
mixed up with the register address.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230508225322.2692066-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
With multiple active VMs, under memory pressure, it is possible that
ttm_bo_validate() run into -EDEADLK in ttm_mem_evict_wait_busy() and
return -ENOMEM.
Until ttm properly handles locking in such scenarios, best thing the
driver can do is unwind the lock and retry.
Update xe_exec_begin to retry validating BOs with a timeout upon
-ENOMEM.
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
With multiple active VMs, under memory pressure, it is possible that
ttm_bo_validate() run into -EDEADLK in ttm_mem_evict_wait_busy() and
return -ENOMEM.
Until ttm properly handles locking in such scenarios, best thing the
driver can do is unwind the lock and retry.
Update preempt worker to retry validating BOs with a timeout upon
-ENOMEM.
v2: revert retry timeout upon -EAGAIN (Thomas)
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_file_close cleanups the xarrays but forgets
to destroy them causing a memleak in xarray internals.
Found with kmemleak.
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Christoph Manszewski <christoph.manszewski@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Set atomic in xe_mmio_wait32() otherwise we would
be scheduling in atomic context.
Fixes: 7dc9b92dcfef ("drm/xe: Remove i915_utils dependency from xe_pcode.")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
guc_mmio_regset_write() had a flags for the registers to be added to the
GuC's regset list. The only register actually using that was RCU_MODE,
but it was setting the flags to a bogus value. From
struct xe_guc_fwif.h,
#define GUC_REGSET_MASKED BIT(0)
#define GUC_REGSET_MASKED_WITH_VALUE BIT(2)
#define GUC_REGSET_RESTORE_ONLY BIT(3)
Cross checking with i915, the only flag to set in RCU_MODE is
GUC_REGSET_MASKED. That can be done automatically from the register, as
long as the definition is correct.
Add the XE_REG_OPTION_MASKED annotation to RCU_MODE and kill the "flags"
field in guc_mmio_regset_write(): guc_mmio_regset_write_one() can decide
that based on the register being passed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230429062332.354139-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The rest of the driver doesn't really support PVC before B0 stepping.
Drop the special handling in xe_guc.c.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230504073250.1436293-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On i915 the "see comment about Wa_22013088509" referred to the comment
in the graphics version >= 11 branch, where there were more details
about it. From the platforms supported by xe, only PVC needs
Wa_22013088509, but as the comment says, it's simpler to do it for all
platforms as there is no downside. Bring the missing comment over from
i915 and reword it to fit xe better.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230504073250.1436293-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Additional programming annotated with Wa_<number> should be reserved to
those that have a official workaround. Just pointing to a bug or
additional reference can be done with something else. Copy what i915
does and refer to it as "hsdes: ....".
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230504073250.1436293-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is required at the minimum for the DRM UAPI to function from
32-bit userspace with a 64-bit kernel.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
