IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Let's make sure we give the driver a valid workqueue.
While at it, also make sure to call destroy_workqueue() only if the
workqueue is a valid one. That is necessary because xe_device_destroy()
is indirectly called as part of the cleanup process of a failed
xe_device_create().
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230518215651.502159-3-gustavo.sousa@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Otherwise no cleanup is actually done if we branch to err_put.
This works for now: currently we do know that, once inside
xe_device_destroy(), ttm_device_init() was successful so we can safely
call ttm_device_fini(); and, for xe->ordered_wq, there is an upcoming
commit to check its value before calling destroy_workqueue().
However, we might need change this in the future if we have more
initializers called that can fail in a way that we can not know which
one was it once inside xe_device_destroy().
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230518215651.502159-2-gustavo.sousa@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The function drm_dev_put() should also be called if xe_device_probe()
fails.
v2:
- Improve commit message. (Lucas)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230519194802.578182-1-gustavo.sousa@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
drivers/gpu/drm/xe/xe_guc_submit_types.h:47: warning: cannot understand
function prototype: 'struct guc_submit_parallel_scratch '
drivers/gpu/drm/xe/xe_devcoredump_types.h:38: warning: Function
parameter or member 'ct' not described in 'xe_devcoredump_snapshot'
CI doesn't appear to be running BAT anymore, assuming this is caused by
the CI.Hooks now failing due to above warnings.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Both GUC_HOST_INTERRUPT and MED_GUC_HOST_INTERRUPT can pass
additional payload data to the GuC but this capability is not
used by the firmware yet.
Stop using value mandated by legacy GuC interrupt register and
use default notify value (zero) instead.
Bspec: 49813, 63363
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This GuC register can be moved together with the rest of the
GuC register definitions and be named in a similar way.
v2: fix placement
Bspec: 63363
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> #v1
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There are multiple kind of config prints and with the upcoming
devcoredump there will be another layer. Let's limit the config
to the top level functions and leave the clean-up work for the
compilers so we don't create a spider-web of configs.
No functional change. Just a preparation for the devcoredump.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Let's continue to add our existent simple logs to devcoredump one
by one. Any format change should come on follow-up work.
v2: remove unnecessary, and now duplicated, dma_fence annotation. (Matthew)
v3: avoid for_each with faulty_engine since that can be already freed at
the time of the read/free. Instead, iterate in the full array of
hw_engines. (Kasan)
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
The goal is to allow for a snapshot capture to be taken at the time
of the crash, while the print out can happen at a later time through
the exposed devcoredump virtual device.
v2: Addressing these Matthew comments:
- Handle memory allocation failures.
- Do not use GFP_ATOMIC on cases like debugfs prints.
- placement of @reg doc.
- identation issues.
v3: checkpatch
v4: Rebase and get back to GFP_ATOMIC only.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Let's start to move our existent logs to devcoredump one by
one. Any format change should come on follow-up work.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
The goal is to allow for a snapshot capture to be taken at the time
of the crash, while the print out can happen at a later time through
the exposed devcoredump virtual device.
v2: Handle memory allocation failures. (Matthew)
Do not use GFP_ATOMIC on cases like debugfs prints. (Matthew)
v3: checkpatch
v4: pending_list allocation needs to be atomic because of the
spin_lock. (Matthew)
get back to GFP_ATOMIC only. (lockdep).
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
These structs and definitions are only used for the guc_submit
and they were added specifically for the parallel submission.
While doing that also delete the unused struct guc_wq_item.
v2: checkpatch fixes.
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Let's start to move our existent logs to devcoredump one by
one. Any format change should come on follow-up work.
v2: Rebase and add the dma_fence locking annotation here.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
The goal is to allow for a snapshot capture to be taken at the time
of the crash, while the print out can happen at a later time through
the exposed devcoredump virtual device.
v2: Handle memory allocation failures. (Matthew)
Do not use GFP_ATOMIC on cases like debugfs prints. (Matthew)
v3: checkpatch fixes
v4: Do not use atomic in the g2h_worker_func (Matthew)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
No functional change here. The goal is to have a clear split between
the mapped portions of the CTB and the static information, so we can
easily capture snapshots that will be used for later read out with
the devcoredump infrastructure.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Unfortunately devcoredump infrastructure does not provide and
interface for us to force the device removal upon the pci_remove
time of our device.
The devcoredump is linked at the device level, so when in use
it will prevent the module removal, but it doesn't prevent the
call of the pci_remove callback. This callback cannot fail
anyway and we end up clearing and freeing the entire pci device.
Hence, after we removed the pci device, we shouldn't allow any
read or free operations to avoid segmentation fault.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
The goal is to use devcoredump infrastructure to report error states
captured at the crash time.
The error state will contain useful information for GPU hang debug, such
as INSTDONE registers and the current buffers getting executed, as well
as any other information that helps user space and allow later replays of
the error.
The proposal here is to avoid a Xe only error_state like i915 and use
a standard dev_coredump infrastructure to expose the error state.
For our own case, the data is only useful if it is a snapshot of the
time when the GPU crash has happened, since we reset the GPU immediately
after and the registers might have changed. So the proposal here is to
have an internal snapshot to be printed out later.
Also, usually a subsequent GPU hang can be only a cause of the initial
one. So we only save the 'first' hang. The dev_coredump has a delayed
work queue where it remove the coredump and free all the data within a
few moments of the error. When that happens we also reset our capture
state and allow further snapshots.
Right now this infra only print out the time of the hang. More information
will be migrated here on subsequent work. Also, in order to organize the
dump better, the goal is to propose dev_coredump changes itself to allow
multiple files and different controls. But for now we start Xe usage of
it without any dependency on dev_coredump core changes.
v2: Add dma_fence annotation for capture that might happen during long
running. (Thomas and Matt)
Use xe->drm.primary->index on drm_info msg. (Jani)
v3: checkpatch fixes
v4: Fix building and locking issues found by Francois.
Actually let's kill all of the locking in here. gt_reset serialization
already guarantee that there will be only one capture at the same time.
Also, the devcoredump has its own locking to protect the free and reads
and drivers don't need to duplicate it.
Besides this, the dma_fence locking was pushed to a following patch
since it is not needed in this one.
Fix a use after free identified by KASAN: Do not stash the faulty_engine
since that will be freed somewhere else.
v5: Fix Uptime - ktime_get_boottime actually returns the Uptime. (Francois)
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
While debugging GT related problems, it's good to know which GT was
reporting problems. Introduce helper macros to allow prefix GT logs
with GT identifier. We will use them in upcoming patches.
v2: use xe_ prefix (Lucas)
v3: use correct include
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is allowed and encouraged by the dma-fencing rules. This along with
allowing compute VMs to export dma-fences on binds will result in a
simpler compute UMD.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Binds are not long running jobs thus we can export dma-fences even if a
VM is in compute mode.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Move xe_register_pci_driver() and xe_unregister_pci_driver() to
init_funcs to make sure that exit functions are also called when
xe_register_pci_driver() fails.
Note that this also allows adding init functions to be run after
xe_register_pci_driver().
v2:
- Move functions to init_funcs instead of having a special case for
xe_register_pci_driver(). (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There is not much of a benefit from using that macro as of now and it
hurts grepability or other ways of cross-referencing.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Alderlake P uses TGL HuC and it was not added together with ADL-S,
because it was failing for unrelated reasons. Now that those are fixed,
allow it to load HuC.
# cat /sys/kernel/debug/dri/0/gt0/uc/huc_info
HuC firmware: i915/tgl_huc.bin
status: RUNNING
version: wanted 0.0, found 7.9
uCode: 589504 bytes
RSA: 256 bytes
HuC status: 0x00090001
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://lore.kernel.org/r/20230512233649.3218736-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
ADL-N is pretty much the same as ADL-P (i.e., Xe_LP graphics + Xe_M
media + Xe_LPD display). However unlike ADL-P, there's no GuC hwconfig
support so the "tgl" GuC firmware should be loaded (i.e., the same
situation as ADL-S).
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com>
Link: https://lore.kernel.org/r/20230419213703.3993439-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Setup the mapping from PCI revid to IP stepping for ADL-P (and its RPL-P
subplatform) in case this information becomes important for implementing
workarounds.
Bspec: 55376
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230419213703.3993439-1-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Checking seqno_recv >= seqno looks like it will incorrectly report true
when the seqno has wrapped (not unlikely given
TLB_INVALIDATION_SEQNO_MAX). Calling xe_gt_tlb_invalidation_wait() might
then return before the flush has been completed by the GuC.
Fix this by treating a large negative delta as an indication that the
seqno has wrapped around. Similar to how we treat a large positive delta
as an indication that the seqno_recv must have wrapped around, but in
that case the seqno has likely also signalled.
It looks like we could also potentially make the seqno use the full
32bits as supported by the GuC.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fix the indent to align with open parenthesis, following the coding
style.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230508225322.2692066-5-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Rename the address field to "addr" rather than "reg" so it's easier to
understand what it is.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230508225322.2692066-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Convert all the callers to deal with xe_mmio_*() using struct xe_reg
instead of plain u32. In a few places there was also a rename
s/reg/reg_val/ when dealing with the value returned so it doesn't get
mixed up with the register address.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230508225322.2692066-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
With multiple active VMs, under memory pressure, it is possible that
ttm_bo_validate() run into -EDEADLK in ttm_mem_evict_wait_busy() and
return -ENOMEM.
Until ttm properly handles locking in such scenarios, best thing the
driver can do is unwind the lock and retry.
Update xe_exec_begin to retry validating BOs with a timeout upon
-ENOMEM.
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
With multiple active VMs, under memory pressure, it is possible that
ttm_bo_validate() run into -EDEADLK in ttm_mem_evict_wait_busy() and
return -ENOMEM.
Until ttm properly handles locking in such scenarios, best thing the
driver can do is unwind the lock and retry.
Update preempt worker to retry validating BOs with a timeout upon
-ENOMEM.
v2: revert retry timeout upon -EAGAIN (Thomas)
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_file_close cleanups the xarrays but forgets
to destroy them causing a memleak in xarray internals.
Found with kmemleak.
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Christoph Manszewski <christoph.manszewski@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Set atomic in xe_mmio_wait32() otherwise we would
be scheduling in atomic context.
Fixes: 7dc9b92dcfef ("drm/xe: Remove i915_utils dependency from xe_pcode.")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
guc_mmio_regset_write() had a flags for the registers to be added to the
GuC's regset list. The only register actually using that was RCU_MODE,
but it was setting the flags to a bogus value. From
struct xe_guc_fwif.h,
#define GUC_REGSET_MASKED BIT(0)
#define GUC_REGSET_MASKED_WITH_VALUE BIT(2)
#define GUC_REGSET_RESTORE_ONLY BIT(3)
Cross checking with i915, the only flag to set in RCU_MODE is
GUC_REGSET_MASKED. That can be done automatically from the register, as
long as the definition is correct.
Add the XE_REG_OPTION_MASKED annotation to RCU_MODE and kill the "flags"
field in guc_mmio_regset_write(): guc_mmio_regset_write_one() can decide
that based on the register being passed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230429062332.354139-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The rest of the driver doesn't really support PVC before B0 stepping.
Drop the special handling in xe_guc.c.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230504073250.1436293-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On i915 the "see comment about Wa_22013088509" referred to the comment
in the graphics version >= 11 branch, where there were more details
about it. From the platforms supported by xe, only PVC needs
Wa_22013088509, but as the comment says, it's simpler to do it for all
platforms as there is no downside. Bring the missing comment over from
i915 and reword it to fit xe better.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230504073250.1436293-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Additional programming annotated with Wa_<number> should be reserved to
those that have a official workaround. Just pointing to a bug or
additional reference can be done with something else. Copy what i915
does and refer to it as "hsdes: ....".
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230504073250.1436293-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is required at the minimum for the DRM UAPI to function from
32-bit userspace with a 64-bit kernel.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Allow xe_bo_addr without lock to print debug information, such
as from xe_analyze_vm.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
copy cs instructions that dont have a explict MOCS field will use this
default MOCS value.
v2:
- move to xe_hw_engine.c
- remove BLIT_CCTL auxiliary macros
- removed MASKED_REG
v3:
- rebased
v4:
- process workaround in hwe->reg_lrc
v5:
- add a new function and call it from xe_gt_record_default_lrcs()
because hwe->reg_lrc is initialized later
BSpec: 45807
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
CS instructions that dont have a explicit MOCS field will use this
default MOCS value.
To do this, it was necessary to initialize part of the mocs earlier
and add new function that loads another array of rtp entries set
during run-time.
This is still missing to handle of mocs read for platforms with
HAS_L3_CCS_READ(aka PVC).
v2:
- move to xe_hw_engine.c
- remove CMD_CCTL auxiliary macros
v3:
- rebased
Bspec: 45826
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Things defined in <linux/init.h> are not really used by that header.
Replace that with <linux/types.h>, to have bool and u32 available.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230503174922.252111-1-gustavo.sousa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Raptorlake-P was tested and it is working as the same as Alderlake-P.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reading the GMD_ID register on platforms before that register
became available is not reliable. The assumption was that since the
register was not allocated, it would return 0. But on PVC for example it
returns garbage (or a very specific number), triggering the following
error:
xe 0000:8c:00.0: [drm] *ERROR* Hardware reports unknown media version 1025.55
Fix it by stop relying on the value returned by that registers on
platforms before GMD_ID. Instead this relies on the graphics description
struct being already pre-set on the device: this can only ever be true
for platforms before the GMD_ID support. In that case, GMD_ID is skipped
and the hardcoded values are used. This should also help on early
bring-up in case the GMD_ID returns something not expected and we need to
temporarily hardcode values. With this, PVC doesn't trigger the error
and goes straight to:
xe 0000:8c:00.0: [drm:xe_display_info_init [xe]] No display IP, skipping
xe 0000:8c:00.0: [drm:xe_pci_probe [xe]] XE_PVC 0bd5:002f dgfx:1 gfx:Xe_HPC (12.60) media:none (0.00) dma_m_s:52 tc:2
xe 0000:8c:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:C0, M:**, D:**, B:B3)
Fixes: 5822bba943ad ("drm/xe: Select graphics/media descriptors from GMD_ID")
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://lore.kernel.org/r/20230427184408.1340988-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The macros to handle the RTP tables are very scary, but shouldn't be
used outside of the header adding the infra. Move it to a separate
header and make sure it's only included when it can be.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-11-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now that struct xe_reg and struct xe_reg_mcr are types that can be used
by xe, convert more of the driver to use them. Some notes about the
conversions:
- The RTP tables don't need the MASKED flags anymore in the
actions as that information now comes from the register
definition
- There is no need for the _XE_RTP_REG/_XE_RTP_REG_MCR macros
and the register types on RTP infra: that comes from the
register definitions.
- When declaring the RTP entries, there is no need anymore to
undef XE_REG and friends: the RTP macros deal with removing
the cast where needed due to not being able to use a compound
statement for initialization in the tables
- The index in the reg-sr xarray is the register offset only.
Otherwise we wouldn't catch mistakes about adding both a
MCR-style and normal-style registers. For that, the register
is now also part of the entry, so the options can be compared
to check for compatible entries.
In order to be able to accomplish this, some improvements are needed on
the RTP macros. Change its implementation to concentrate on "pasting a prefix
to each argument" rather than the more general "call any macro for each
argument". Hopefully this will avoid trying to extend this infra and
making it more complex. With the use of tuples for building the
arguments, it's not possible to pass additional register fields and
using xe_reg in the RTP tables.
xe_mmio_* still need to be converted, from u32 to xe_reg, but that is
left for another change.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-10-lucas.demarchi@intel.com
Link: https://lore.kernel.org/r/20230427223256.1432787-6-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Go over all registers used in xe_rtp tables and mark the registers as
masked if they were passed a XE_RTP_ACTION_FLAG(MASKED_REG) flag.
This will allow the flag to be removed in future when xe_rtp starts
using the real xe_reg_t type.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-9-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
