IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
MTL's media IP (Xe_LPM+) only has a single type of steering ("OAADDRM")
which selects between media slice 0 and media slice 1. We'll always
steer to media slice 0 unless it is fused off (which is the case when
VD0, VE0, and SFC0 are all reported as unavailable).
Bspec: 67789
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-15-matthew.d.roper@intel.com
MTL's graphics IP (Xe_LPG) once again changes the multicast register
types and steering details. Key changes from past platforms:
* The number of instances of some MCR types (NODE, OAAL2, and GAM) vary
according to the MTL subplatform and cannot be read from fuse
registers. However steering to instance #0 will always provided a
non-terminated value, so we can lump these all into a single
"instance0" table.
* The MCR steering register (and its bitfields) has changed.
Unlike past platforms, we will be explicitly steering all types of MCR
accesses, including those for "SLICE" and "DSS" ranges; we no longer
rely on implicit steering. On previous platforms, various
hardware/firmware agents that needed to access registers typically had
their own steering control registers, allowing them to perform multicast
steering without clobbering the CPU/kernel steering. Starting with MTL,
more of these agents now share a single steering register (0xFD4) and it
is no longer safe for us to assume that the value will remain unchanged
from how we initialized it during startup. There is also a slight
chance of race conditions between the driver and a hardware/firmware
agent, so the hardware provides a semaphore register that can be used to
coordinate access to the steering register. Support for the semaphore
register will be introduced in a future patch.
v2:
- Use Xe_LPG terminology instead of "MTL 3D" since it's the IP version
we're matching on now rather than the platform.
- Don't combine l3bank and mslice masks into a union. It's not related
to the other changes here and we might still need both of them on
some future platform.
- Separate debug dumping of steering settings to a separate helper
function. (Tvrtko)
- Update debug dumping to include DSS ranges (and future-proof it so
that any new ranges added on future platforms will also be dumped).
- Restore MULTICAST bit at the end of rw_with_mcr_steering_fw() if we
cleared it. Also force the MULTICAST bit to true at the beginning of
multicast writes just to be safe. (Bala)
Bspec: 67788, 67112
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-14-matthew.d.roper@intel.com
Rather than treating multicast registers as 'i915_reg_t' let's define
them as a completely new type. This will allow the compiler to help us
make sure we're using multicast-aware functions to operate on multicast
registers.
This plan does break down a bit in places where we're just maintaining
heterogeneous lists of registers (e.g., various MMIO whitelists used by
perf, GVT, etc.) rather than performing reads/writes. We only really
care about the offset in those cases, so for now we can "cast" the
registers as non-MCR, leaving us with a list of i915_reg_t's, but we may
want to look for better ways to store mixed collections of i915_reg_t
and i915_mcr_reg_t in the future.
v2:
- Add TLB invalidation registers
v3:
- Make type checking of i915_mmio_reg_offset() stricter. It will
accept either i915_reg_t or i915_mcr_reg_t, but will now raise a
compile error if any other type is passed, even if that type contains
a 'reg' field. (Jani)
- Drop a ton of GVT changes; allowing i915_mmio_reg_offset() to take
either an i915_reg_t or an i915_mcr_reg_t means that the huge lists
of MMIO_D*() macros used in GVT will continue to work without
modification. We need only make changes to structures that have an
explicit i915_reg_t in them now.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-13-matthew.d.roper@intel.com
MCR registers can be placed on the GuC's save/restore list, but at the
moment they are always handled in a multicast manner (i.e., the GuC
reads one instance to save the value and then does a multicast write to
restore that single value to all instances). In the future the GuC will
probably give us an alternate interface to do unicast per-instance
save/restore operations, so we should be very clear about which
registers on the list are MCR registers (and in the future which
save/restore behavior we want for them).
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-11-matthew.d.roper@intel.com
Rather than relying on the implicit behavior of intel_uncore_*()
functions, let's always use the intel_gt_mcr_*() functions to operate on
multicast/replicated registers.
v2:
- Add TLB invalidation registers
v3:
- Switch more uncore operations in mmio_invalidate_full() to MCR
operations for Xe_HP. (Bala)
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-10-matthew.d.roper@intel.com
Rather than using the same _MMIO() macro to define MCR registers as
singleton registers, let's use a new MCR_REG() macro to make it clear
that these registers are special and should be handled accordingly. For
now MCR_REG() will still generate an i915_reg_t with the given offset,
but we'll change that in future patches.
Bspec: 66673, 66696, 66534, 67609
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-9-matthew.d.roper@intel.com
Xe_HP has some MCR registers that need to be polled for completion of
operations like TLB invalidation. Those registers are in the GAM range,
which rolls up the status from each unit into the 'primary' instance's
value. This makes it useful to have a dedicated 'wait for register'
function that handles this on MCR registers, similar to the
__intel_wait_for_register_fw() function we already have for regular
registers.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-8-matthew.d.roper@intel.com
On Xe_HP the fault registers are now in a multicast register range.
However as part of the GAM these registers follow special rules and we
need only read from the "primary" GAM's instance to get the information
we need. So a single intel_gt_mcr_read_any() (which will automatically
steer to the primary GAM) is sufficient; we don't need to loop over each
instance of the MCR register.
v2:
- Update more instances of fault registers. (Bala)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-7-matthew.d.roper@intel.com
There are cases where we wish to read from any non-terminated MCR
register instance (or the primary instance in the case of GAM ranges),
clear/set some bits, and then write the value back out to the register
in a multicast manner. Adding a "multicast RMW" will avoid the need to
open-code this.
v2:
- Return a u32 to align with the recent change to intel_uncore_rmw.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-6-matthew.d.roper@intel.com
We have a few registers that have existed for several hardware
generations, but are only used by the driver on Xe_HP and beyond. In
cases where the Xe_HP version of the register is now replicated and uses
multicast behavior, but earlier generations were singleton, let's change
the register prefix to "XEHP_" to help clarify that we're using the
newer multicast form of the register.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-5-matthew.d.roper@intel.com
Let's drop a few register definitions that are unused anywhere in the
driver today. Since the referenced offsets are part of what is now
considered a multicast register region, the current definitions would
not be correct for use on any future platform.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-4-matthew.d.roper@intel.com
Starting in Xe_HP, several registers our driver works with have been
converted from singleton registers into replicated registers with
multicast behavior. Although the registers are still located at the
same MMIO offsets as on previous platforms, let's duplicate the register
definitions in preparation for upcoming patches that will handle
multicast registers in a special manner.
The registers that are now replicated on Xe_HP are:
* PAT_INDEX (mslice replication)
* FF_MODE2 (gslice replication)
* COMMON_SLICE_CHICKEN3 (gslice replication)
* SLICE_COMMON_ECO_CHICKEN1 (gslice replication)
* SLICE_UNIT_LEVEL_CLKGATE (gslice replication)
* LNCFCMOCS (lncf replication)
Note that there are a couple places in selftest_mocs.c where the
gen9 version of LNCFCMOCS is still used without regards for which
platform we're on. Those cases are just doing an offset lookup and not
issuing any CPU reads/writes of the register, so the potentially
multicast nature of the register doesn't come into play.
v2:
- Add commit message note about the unconditional GEN9_LNCFCMOCS usage
in selftest_mocs. (Bala)
- Include some additional TLB registers.
Bspec: 66534
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-3-matthew.d.roper@intel.com
Gen8 was the first time our hardware had multicast registers (or at
least the first time the multicast nature was exposed and MMIO accesses
could be steered). There are some registers that transitioned from
singleton behavior to multicast during the gen7 -> gen8 transition;
let's duplicate the register definitions for those registers in
preparation for upcoming patches that will handle MCR registers in a
special manner.
The registers adjusted are:
* MISCCPCTL
* SAMPLER_INSTDONE
* ROW_INSTDONE
* ROW_CHICKEN2
* HALF_SLICE_CHICKEN1
* HALF_SLICE_CHICKEN3
v2:
- Use the gen8 version of HALF_SLICE_CHICKEN3 in GVT's gen9 engine MMIO
list. (Bala)
- Update to the gen8 version of MISCCPCTL in a couple new workarounds
that were recently added for DG2/PVC. (Bala)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-2-matthew.d.roper@intel.com
Expose power1_max_interval, that is the tau corresponding to PL1, as a
custom hwmon attribute. Some bit manipulation is needed because of the
format of PKG_PWR_LIM_1_TIME in
GT0_PACKAGE_RAPL_LIMIT register (1.x * power(2,y)).
v2: Update date and kernel version in Documentation (Badal)
v3: Cleaned up hwm_power1_max_interval_store() (Badal)
v4:
- Fixed review comments (Anshuman)
- In hwm_power1_max_interval_store() get PKG_MAX_WIN from
pkg_power_sku when it is valid (Ashutosh)
- KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v5: On some of the DGFX setups it is seen that although pkg_power_sku
is valid the field PKG_WIN_MAX is not populated. So it is
decided to stick to default value of PKG_WIN_MAX (Ashutosh)
v6: Change contact to intel-gfx (Rodrigo)
Fixed variable types in hwm_power1_max_interval_store (Andi)
Documented PKG_MAX_WIN_DEFAULT (Andi)
Removed else in hwm_attributes_visible (Andi)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-7-ashutosh.dixit@intel.com
Use i915 HWMON to display device level energy input.
v2: Updated the date and kernel version in feature description
v3:
- Cleaned up hwm_energy function and removed unused function
i915_hwmon_energy_status_get (Ashutosh)
v4: KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v5: Change contact to intel-gfx (Rodrigo)
Change return type of hwm_energy to void (Andi)
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-5-ashutosh.dixit@intel.com
Use i915 HWMON to display/modify dGfx power PL1 limit and TDP setting.
v2:
- Fix review comments (Ashutosh)
- Do not restore power1_max upon module unload/load sequence
because on production systems modules are always loaded
and not unloaded/reloaded (Ashutosh)
- Fix review comments (Jani)
- Remove endianness conversion (Ashutosh)
v3: Add power1_rated_max (Ashutosh)
v4:
- Use macro HWMON_CHANNEL_INFO to define power channel (Guenter)
- Update the date and kernel version in Documentation (Badal)
v5: Use hwm_ prefix for static functions (Ashutosh)
v6: Fix review comments (Ashutosh)
v7:
- Define PCU_PACKAGE_POWER_SKU for DG1,DG2 and move
PKG_PKG_TDP to intel_mchbar_regs.h (Anshuman)
- KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v8: Change contact to intel-gfx (Rodrigo)
Minor change to val_sku_unit init (Andi)
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-4-ashutosh.dixit@intel.com
Use i915 HWMON subsystem to display current input voltage.
v2:
- Updated date and kernel version in feature description
- Fixed review comments (Ashutosh)
v3: Use macro HWMON_CHANNEL_INFO to define hwmon channel (Guenter)
v4:
- Fixed review comments (Ashutosh)
- Use hwm_ prefix for static functions (Ashutosh)
v5: Added unit of voltage as millivolts (Ashutosh)
v6: KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v7: Change contact to intel-gfx (Rodrigo)
GEN12_RPSTAT1 is available for all Gen12+ (Andi)
Added Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
to MAINTAINERS
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-3-ashutosh.dixit@intel.com
The i915 HWMON module will be used to expose voltage, power and energy
values for dGfx. Here we set up i915 hwmon infrastructure including i915
hwmon registration, basic data structures and functions.
v2:
- Create HWMON infra patch (Ashutosh)
- Fixed review comments (Jani)
- Remove "select HWMON" from i915/Kconfig (Jani)
v3: Use hwm_ prefix for static functions (Ashutosh)
v4: s/#ifdef CONFIG_HWMON/#if IS_REACHABLE(CONFIG_HWMON)/ since the former
doesn't work if hwmon is compiled as a module (Guenter)
v5: Fixed review comments (Jani)
v6: s/kzalloc/devm_kzalloc/ (Andi)
v7: s/hwmon_device_register_with_info/
devm_hwmon_device_register_with_info/ (Ashutosh)
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-2-ashutosh.dixit@intel.com
On some platforms we potentially have different alignment restrictions
depending on the memory type. We also now have different alignment
restrictions for the same region across different kernel versions.
Extend the region query to return the minimum required GTT alignment.
Testcase: igt@gem_create@create-ext-placement-alignment
Testcase: igt@i915_query@query-regions-sanity-check
Suggested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yang A Shi <yang.a.shi@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004114915.221708-2-matthew.auld@intel.com
It turns out that on production DG2/ATS HW we should have support for
PS64. This feature allows to provide a 64K TLB hint at the PTE level,
which is a lot more flexible than the current method of enabling 64K GTT
pages for the entire page-table, since that leads to all kinds of
annoying restrictions, as documented in:
commit caa574ffc4aaf4f29b890223878c63e2e7772f62
Author: Matthew Auld <matthew.auld@intel.com>
Date: Sat Feb 19 00:17:49 2022 +0530
drm/i915/uapi: document behaviour for DG2 64K support
On discrete platforms like DG2, we need to support a minimum page size
of 64K when dealing with device local-memory. This is quite tricky for
various reasons, so try to document the new implicit uapi for this.
With PS64, we can now drop the 2M GTT alignment restriction, and instead
only require 64K or larger when dealing with lmem. We still use the
compact-pt layout when possible, but only when we are certain that this
doesn't interfere with userspace.
Note that this is a change in uAPI behaviour, but hopefully shouldn't be
a concern (IGT is at least able to autodetect the alignment), since we
are only making the GTT alignment constraint less restrictive.
Based on a patch from CQ Tang.
v2: update the comment wrt scratch page
v3: (Nirmoy)
- Fix the selftest to actually use the random size, plus some comment
improvements, also drop the rem stuff.
Reported-by: Michal Mrozek <michal.mrozek@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yang A Shi <yang.a.shi@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004114915.221708-1-matthew.auld@intel.com
Commit 3e7abf814193 ("drm/i915: Extract GT render power state management")
removes the "trace_intel_gpu_freq_change()" trace points but
their definition was left without users. Remove it.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011135940.367048-1-andi.shyti@linux.intel.com
Commit 39a2bd34c933 ("drm/i915: Use the vma resource as argument for gtt
binding / unbinding") introduced a regression that due to the vma resource
tracking of the binding state, dpt ptes were not correctly repopulated.
Fix this by clearing the vma resource state before repopulating.
The state will subsequently be restored by the bind_vma operation.
Fixes: 39a2bd34c933 ("drm/i915: Use the vma resource as argument for gtt binding / unbinding")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912121957.31310-1-thomas.hellstrom@linux.intel.com
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.18+
Reported-and-tested-by: Kevin Boulain <kevinboulain@gmail.com>
Tested-by: David de Sousa <davidesousa@gmail.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221005121159.340245-1-thomas.hellstrom@linux.intel.com
Read the values stored in the SLPC structures. Remove the
fields that are no longer valid (like RPS interrupts) as
well.
v2: Move all functionality changes to this patch (Jani)
v3: Fix compile warning and if condition (Jani)
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221005155943.34747-3-vinay.belgaumkar@intel.com
The assignment to variable taken is redundant and so it can be
removed as well as the variable too.
Cleans up clang-scan build warnings:
warning: Although the value stored to 'taken' is used in the enclosing
expression, the value is never actually read from 'taken'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221007195345.2749911-1-colin.i.king@gmail.com
The variable ret is being assigned with a value that is never read
both before and after a while-loop. The variable is being re-assigned
inside the while-loop and afterwards on the call to the function
i915_gem_object_lock_interruptible. Remove the redundants assignments.
Cleans up clang scan-build warnings:
warning: Although the value stored to 'ret' is used in the
enclosing expression, the value is never actually read
from 'ret' [deadcode.DeadStores]
warning: Value stored to 'ret' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221007194745.2749277-1-colin.i.king@gmail.com
Restore the previous behaviour here where we compare the
pci_resource_len() with the actual lmem_size, and not the dsm size,
since dsm here is just some subset snipped off the end of the lmem.
Otherwise we will incorrectly report an io_size > 0 on small-bar
systems.
It doesn't looks like MTL is expecting small-bar with its stolen memory,
based on:
GEM_BUG_ON(pci_resource_len(pdev, GEN12_LMEM_BAR) != SZ_256M)
GEM_BUG_ON((dsm_size + SZ_8M) > lmem_size)
So just move the HAS_BAR2_SMEM_STOLEN() check first, which then ignores
the small bar part, and we can go back to checking lmem_size against the
BAR size.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7007
Fixes: dbb2ffbfd708 ("drm/i915/mtl: enable local stolen memory")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221005153148.758822-2-matthew.auld@intel.com
The mask was added in commit e5f415bfc5c2 ("drm/i915: Add missing mask
when reading GEN12_DSMBASE"), but then looks to be dropped in some
unrelated code movement in commit dbb2ffbfd708 ("drm/i915/mtl: enable
local stolen memory") without explanation. Add it back.
Fixes: dbb2ffbfd708 ("drm/i915/mtl: enable local stolen memory")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221005153148.758822-1-matthew.auld@intel.com
On small-bar systems we could be given something non-mappable here,
which leads to nasty oops. Make this nicer by checking if the resource
is mappable or not, and return an error otherwise.
v2: drop GEM_BUG_ON(flags & I915_BO_ALLOC_GPU_ONLY)
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jianshui Yu <jianshui.yu@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004131916.233474-5-matthew.auld@intel.com
For these types of display buffers, we need to able to CPU access some
part of the backing memory in prepare_plane_clear_colors(). As a result
we need to ensure we always place in the mappable part of lmem, which
becomes necessary on small-bar systems.
v2(Nirmoy & Ville):
- Add some commentary for why we need to CPU access the buffer.
- Split out the other changes, so we just consider the display change
here.
v3:
- Handle this in the dpt path.
v4(Ville):
- Drop the intel_fb_rc_ccs_cc_plane() sanity check in
pin_and_fence_fb_obj(), since we can also trigger this on DG1 it
seems.
Fixes: eb1c535f0d69 ("drm/i915: turn on small BAR support")
Reported-by: Jianshui Yu <jianshui.yu@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004131916.233474-4-matthew.auld@intel.com
In the next patch we want to move the object (if the current resource is
not compatible), to the mappable part of lmem for some display buffers.
Currently that requires being able to unset the I915_BO_ALLOC_GPU_ONLY
hint.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jianshui Yu <jianshui.yu@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004131916.233474-3-matthew.auld@intel.com
On platforms like DG2, it looks like the dpt path here is missing the
migrate-to-lmem step on discrete platforms.
v2:
- Move the vma_pin() under the for_i915_gem_ww(), otherwise the
object can be moved after dropping the lock and then doing the pin.
Fixes: 33e7a975103c ("drm/i915/xelpd: First stab at DPT support")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jianshui Yu <jianshui.yu@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004131916.233474-2-matthew.auld@intel.com
The copy is async (if there even is one), but when later updating the
GGTT we always sync against the binding, which will in turn sync against
any moves.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jianshui Yu <jianshui.yu@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004131916.233474-1-matthew.auld@intel.com
Patch which added graceful exit for non-persistent contexts missed the
fact it is not enough to set the exiting flag on a context and let the
backend handle it from there.
GuC backend cannot handle it because it runs independently in the
firmware and driver might not see the requests ever again. Patch also
missed the fact some usages of intel_context_is_banned in the GuC backend
needed replacing with newly introduced intel_context_is_schedulable.
Fix the first issue by calling into backend revoke when we know this is
the last chance to do it. Fix the second issue by replacing
intel_context_is_banned with intel_context_is_schedulable, which should
always be safe since latter is a superset of the former.
v2:
* Just call ce->ops->revoke unconditionally. (Andrzej)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 45c64ecf97ee ("drm/i915: Improve user experience and driver robustness under SIGINT or similar")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: <stable@vger.kernel.org> # v6.0+
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003121630.694249-1-tvrtko.ursulin@linux.intel.com
Intel hardware allows some preemption settings to be controlled either
by the kernel-mode driver exclusively, or placed under control of the
user-mode drivers; on Linux we always select the userspace control
option. The various registers involved in this are not documented very
clearly; let's add some clarifying comments to help explain how this all
works and provide some history on why our Linux drivers take the
approach they do (which I believe differs from the path taken by certain
other operating systems' drivers).
While we're at it, let's also remove the graphics version 12 upper bound
on this programming. As described, we don't have any plans to move away
from UMD control of preemption settings on future platforms, and there's
currently no reason to believe that the hardware will fundamentally
change how these registers and settings work after version 12.
Bspec: 45921, 45858, 45863
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Wayne Boyer <wayne.boyer@intel.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907212410.22623-1-matthew.d.roper@intel.com
It looks like we need this for local-memory, if we want to use ptrace.
Something more is still needed if we want to handle non-mappable memory,
which looks quite annoying.
v2:
- ttm_bo_kmap doesn't seem to work well here, and seems to expect
contiguous resource.
v3(Andi):
- s/PAGE_SIZE/bytes/ when passing in the size of the mapping.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6989
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003172819.99245-1-matthew.auld@intel.com
The fw name is different and we need to record the fact that the blob is
gsc-loaded, so add a new macro to help.
Note: A-step DG2 G10 does not support HuC loading via GSC and would
require a separate firmware to be loaded the legacy way, but that's
not a production stepping so we're not going to bother.
v2: rebase on new fw fetch logic
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Acked-by: Tony Ye <tony.ye@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-15-daniele.ceraolospurio@intel.com
The current HuC status getparam return values are a bit confusing in
regards to what happens in some scenarios. In particular, most of the
error cases cause the ioctl to return an error, but a couple of them,
INIT_FAIL and LOAD_FAIL, are not explicitly handled and neither is
their expected return value documented; these 2 error cases therefore
end up into the catch-all umbrella of the "HuC not loaded" case, with
this case therefore including both some error scenarios and the load
in progress one.
The updates included in this patch change the handling so that all
error cases behave the same way, i.e. return an errno code, and so
that the HuC load in progress case is unambiguous.
The patch also includes a small change to the FW init path to make sure
we always transition to an error state if something goes wrong.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Tony Ye <tony.ye@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-14-daniele.ceraolospurio@intel.com
Wait on the fence to be signalled to avoid the submissions finding HuC
not yet loaded.
v2: use dedicaded wait_queue_entry for waiting in HuC load, as submitq
can't be re-used for it.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Acked-by: Tony Ye <tony.ye@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-13-daniele.ceraolospurio@intel.com
Given that HuC load is delayed on DG2, this patch adds support for a fence
that can be used to wait for load completion. No waiters are added in this
patch (they're coming up in the next one), to keep the focus of the
patch on the tracking logic.
The full HuC loading flow on boot DG2 is as follows:
1) i915 exports the GSC as an aux device;
2) the mei-gsc driver is loaded on the aux device;
3) the mei-pxp component is loaded;
4) mei-pxp calls back into i915 and we load the HuC.
Between steps 1 and 2 there can be several seconds of gap, mainly due to
the kernel doing other work during the boot.
The resume flow is slightly different, because we don't need to
re-expose or re-probe the aux device, so we go directly to step 3 once
i915 and mei-gsc have completed their resume flow.
Here's an example of the boot timing, captured with some logs added to
i915:
[ 17.908307] [drm] adding GSC device
[ 17.915717] [drm] i915 probe done
[ 22.282917] [drm] mei-gsc bound
[ 22.938153] [drm] HuC authenticated
Also to note is that if something goes wrong during GSC HW init the
mei-gsc driver will still bind, but steps 3 and 4 will not happen.
The status tracking is done by registering a bus_notifier to receive a
callback when the mei-gsc driver binds, with a large enough timeout to
account for delays. Once mei-gsc is bound, we switch to a smaller
timeout to wait for the mei-pxp component to load.
The fence is signalled on HuC load complete or if anything goes wrong in
any of the tracking steps. Timeout are enforced via hrtimer callbacks.
v2: fix includes (Jani)
v5: gsc_notifier() remove unneeded ()
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-12-daniele.ceraolospurio@intel.com
The GSC will perform both the load and the authentication, so we just
need to check the auth bit after the GSC has replied.
Since we require the PXP module to load the HuC, the earliest we can
trigger the load is during the pxp_bind operation.
Note that GSC-loaded HuC survives GT reset, so we need to just mark it
as ready when we re-init the GT HW.
V2: move setting of HuC fw error state to the failure path of the HuC
auth function, so it covers both the legacy and new auth flows
V4:
1. Fix typo in the commit message
2. style fix in intel_huc_wait_for_auth_complete()
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-11-daniele.ceraolospurio@intel.com
Add support for loading HuC via a pxp stream command.
V4:
1. Remove unnecessary include in intel_pxp_huc.h (Jani)
2. Adjust copyright year to 2022
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-10-daniele.ceraolospurio@intel.com
Command to be sent via the stream interface are written to a local
memory page, whose address is then provided to the GSC.
The interface supports providing a full sg with multiple pages for both
input and output messages, but since for now we only aim to support short
and synchronous messages we can use a single page for both input and
output.
Note that the mei interface expects an sg of 4k pages, while our lmem pages
are 64k. If we ever need to support more than 4k we'll need to convert.
Added a TODO comment to the code to record this.
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-9-daniele.ceraolospurio@intel.com
The mei_pxp module is required to send the command to load authenticate
the HuC to the GSC even if pxp is not in use for protected content
management.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-8-daniele.ceraolospurio@intel.com
With on-boards graphics card, both i915 and MEI
are in the same device hierarchy with the same parent,
while for discrete gfx card the MEI is its child device.
Adjust the match function for that scenario
by matching MEI parent device with i915.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Vitaly Lubart <vitaly.lubart@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-7-daniele.ceraolospurio@intel.com
The discrete graphics card with GSC firmware
using command streamer API hence it requires to enhance
pxp module with the new gsc_command() handler.
The handler is implemented via mei_pxp_gsc_command() which is
just a thin wrapper around mei_cldev_send_gsc_command()
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-6-daniele.ceraolospurio@intel.com
