IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There is part of our man page that describes how to switch to the
traditional (non-socket) activation but it might still happens sometimes that
there is an extra --timeout option specified for the daemon.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
libvirt-guests has After= dependency for all the sockets and that is enough.
With the extra Before= in the service file systemd postpones the start of the
socket activated service (when libvirt-guests is trying to connect to the
socket) until after libvirt-guests is stopped effectively making `systemctl stop
libvirt-guests` deadlock. The reason for that is that all stop jobs are
scheduled before any start job. Removing the redundant Before= specification
fixes this behaviour.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The node_device_driver.h declares nodeDeviceLock() and
nodeDeviceUnlock() functions which used to exist, but after
rework to automatic mutex management they exist no more. Their
last use was removed in v8.1.0-rc1~122.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Currently, udevNodeRegister() is forward declared in
node_device_driver.h even though the function is implemented in
node_device_udev.c which warrants node_device_udev.h header file.
Move the declaration into the correct file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Nothing in the header file requires the include of libudev.h, as
the former header file is now empty.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The DMI_DEVPATH macro is used exclusively within
node_device_udev.c. There's no need to expose it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The SYSFS_DATA_SIZE macro is Unused since its introduction in
v0.7.3~48. Sorry Dave.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
This reverts commit e49313b54e.
This reverts commit a0f37232b9.
Revert them together to not break build.
This fix of the issue is incorrect and breaks usage of other controllers
in hybrid mode that systemd creates, specifically usage of devices and
cpuacct controllers as they are now assumed to be part of the cgroup v2
topology which is not true.
We need to find different solution to the issue.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Latest versions of Avocado create 'by-status' symlink shortcuts to test
results, IOW:
# this is the main test results directory containing all data
$ ls <path>/avocado/job-results/latest/test-results/
01-scripts_networks_050-transient-lifecycle.t
02-scripts_networks_051-transient-autostart.t
...
22-scripts_networks_400-guest-bandwidth.t
by_status/
# list only the failed tests
$ ls -l <path>/avocado/job-results/latest/test-results/by-status/FAIL
19-scripts_networks_360-guest-network-vepa.t ->
<path>/avocado/job-results/latest/test-results/19-scripts_networks_360-guest-network-vepa.t
Therefore, let's bundle only the failed ones, it's going to make the
log artifacts more obvious when looking for libvirt errors.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't create an avocado directory in the resulting log artifacts
if Avocado didn't even run (e.g. libvirt errored out on service
restart).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All 'script' blocks are defined as 'set -e' and so a single failed
return value means we won't collect some of the logs. Because of
the nature of the original job's failure some of the log sources
might not be available, but that's fine, however, the gitlab
after_script job cannot finish prematurely.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It could be quite confusing looking at the job log artifacts and having
an empty coredump log in there, IOW it doesn't really give much
confidence that the reporting mechanism actually works.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's a directory, so -d should be used with 'test'.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Both log filters and log outputs expect string values, however, augeas
apparently requires an extra level of quotes apart from the ones we
pass via shell (see comment [1]) to work properly, otherwise augeas
ignores the value and returns 0.
Without this fix we don't set libvirt's log level to debug, we don't
set logging to a file and hence we don't include the logs in CI
artifacts in case the test suite fails.
[1] https://github.com/hercules-team/augeas/issues/301#issuecomment-143699880
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It was missing from the set. While at it, order the daemon set
alphabetically.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We document that a commit fixing an issue tracked in GitLab
should put just "Fixes: #NNN" into its commit message. But when
viewing git log, having full URL which is directly clickable is
more developer friendly and GitLab is capable of handling both.
Therefore, document that users should put full URL, just like
when fixing a bug tracked in other sites.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
On normal vm startup, we open a file descriptor
for the vsock device in qemuProcessPrepareHost.
However, when doing domxml-to-native, no file descriptors are open.
Only pass the fd if it's not -1, to make domxml-to-native work.
https://bugzilla.redhat.com/show_bug.cgi?id=1777212
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When libvirtd is restarted during an active outgoing migration (or
snapshot, save, or dump which are internally implemented as migration)
it wants to cancel the migration. But by a mistake in commit
v8.7.0-57-g2d7b22b561 the qemuMigrationSrcCancel function is called with
wait == true, which leads to an instant crash by dereferencing NULL
pointer stored in priv->job.current.
When canceling migration to file (snapshot, save, dump), we don't need
to wait until it is really canceled as no migration capabilities or
parameters need to be restored.
On the other hand we need to wait when canceling outgoing migration and
since we don't have virDomainJobData at this point, we have to
temporarily restore the migration job to make sure we can process
MIGRATION events from QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In my commit v8.7.0-57-g2d7b22b561 I attempted to make
qemuMigrationSrcCancel synchronous, but failed. When we are canceling
migration after some kind of error which is detected in
in qemuMigrationSrcWaitForCompletion, jobData->status will be set to
VIR_DOMAIN_JOB_STATUS_FAILED regardless on QEMU state. So instead of
relying on the translated jobData->status in qemuMigrationSrcIsCanceled
we need to check the migration status we get from QEMU MIGRATION event.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
systemd in hybrid mode uses v1 hierarchies for controllers and v2 for
process tracking.
The LXC code uses virCgroupAddMachineProcess() to move processes into
appropriate cgroup by manipulating cgroupfs directly. (Note, despite
libvirt also supports talking to systemd directly via
org.freedesktop.machine1 API.)
If this path is taken, libvirt/lxc must convince systemd that processes
really belong to new cgroup, i.e. also the tracking v2 hierarchy must
undergo migration too.
The current check would evaluate v2 backend as unavailable with hybrid
mode (because there are no available controllers). Simplify the
condition and consider the mounted cgroup2 as sufficient to touch v2
hierarchy.
This consequently creates an issue with binding the V2 mount. In hybrid
mode the V2 filesystem may be mounted upon the V1 filesystem. By reversing
the order in which backends are mounted in virCgroupBindMount this problem
is circumvented.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/182
Signed-off-by: Eric van Blokland <mail@ericvanblokland.nl>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A recent merge request from Weblate adding a new file fails syntax-check
because it adds a new language at the end of LINGUAS, instead of sorting
it alphabetically. Rather than trying to work around it, drop this
pointless rule.
Reverts: 8d160b7979
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The removal of the special internal flag for '-netdev' validatition now
allows us to use the same virCommand object for validation of the
schema.
Pass it into the validator instead of re-parsing and re-generating
everything.
This improved the runtime of qemuxml2argvtest by ~25% on my box.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
As advertised in the previous commit, QEMU_SCHED_CORE_VCPUS case
is implemented for hotplug case. The implementation is very
similar to the cold boot case, except here we fork off for every
vCPU (because the implementation is done in
qemuProcessSetupVcpu() which is also the function that's called
from hotplug code). But that's okay because our hotplug APIs
allow hotplugging one device at the time.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2074559
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For QEMU_SCHED_CORE_VCPUS case, the vCPU threads should be placed
all into one scheduling group, but not the emulator or any of its
threads. Therefore, as soon as vCPU TIDs are detected, fork off a
child which then creates a separate scheduling group and adds all
vCPU threads into it.
Please note, this commit only handles the cold boot case. Hotplug
is going to be implemented in the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For QEMU_SCHED_CORE_FULL case, all helper processes should be
placed into the same scheduling group as the QEMU process they
serve. It may happen though, that a helper process is started
before QEMU (cold start of a domain). But we have the dummy
process running from which the QEMU process will inherit the
scheduling group, so we can use the dummy process PID as an
argument to virCommandSetRunAmong().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For QEMU_SCHED_CORE_EMULATOR or QEMU_SCHED_CORE_FULL the QEMU
process (and its vCPU threads) should be placed into its own
scheduling group. Since we have the dummy process running for
exactly this purpose use its PID as an argument to
virCommandSetRunAmong().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The aim of this helper function is to spawn a child process in
which new scheduling group is created. This dummy process will
then used to distribute scheduling group from (e.g. when starting
helper processes or QEMU itself). The process is not needed for
QEMU_SCHED_CORE_NONE case (obviously) nor for
QEMU_SCHED_CORE_VCPUS case (because in that case a slightly
different child will be forked off).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Ideally, we would just pick the best default and users wouldn't
have to intervene at all. But in some cases it may be handy to
not bother with SCHED_CORE at all or place helper processes into
the same group as QEMU. Introduce a knob in qemu.conf to allow
users control this behaviour.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are two modes of core scheduling that are handy wrt
virCommand:
1) create new trusted group when executing a virCommand
2) place freshly executed virCommand into the trusted group of
another process.
Therefore, implement these two new operations as new APIs:
virCommandSetRunAlone() and virCommandSetRunAmong(),
respectively.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since its 5.14 release the Linux kernel allows userspace to
define trusted groups of processes/threads that can run on
sibling Hyper Threads (HT) at the same time. This is to mitigate
side channel attacks like L1TF or MDS. If there are no tasks to
fully utilize all HTs, then a HT will idle instead of running a
task from another (un-)trusted group.
On low level, this is implemented by cookies (effectively an UL
value): processes in the same trusted group share the same cookie
and cookie is unique to the group. There are four basic
operations:
1) PR_SCHED_CORE_GET -- get cookie of given PID,
2) PR_SCHED_CORE_CREATE -- create a new unique cookie for PID,
3) PR_SCHED_CORE_SHARE_TO -- push cookie of the caller onto
another PID,
4) PR_SCHED_CORE_SHARE_FROM -- pull cookie of another PID into
the caller.
Since a system where the code is built can be different to the
one where the code is ran let's provide declaration of some
values. It's not unusual for distros to ship older linux-headers
than the actual kernel.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are couple of scenarios where we need to reflect MAC change
done in the guest:
1) domain restore from a file (here, we don't store updated MAC
in the save file and thus on restore create the macvtap with
the original MAC),
2) reconnecting to a running domain (here, the guest might have
changed the MAC while we were not running),
3) migration (here, guest might change the MAC address but we
fail to respond to it,
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When restoring a domain from a save image, we need to query QEMU
for some runtime information that is not stored in status XML, or
even if it is, it's not parsed (e.g. virtio-mem actual size, or
soon rx-filters for macvtaps).
During migration, this is done in qemuMigrationDstFinishFresh(),
or in case of newly started domain in qemuProcessStart(). Except,
the way that the code is written, when restoring from a save
image (which is effectively a migration), the state is never
refreshed, because qemuProcessStart() sees incoming migration so
it does not refresh the state thinking it'll be done in the
finish phase. But restoring from a save image has no finish
phase. Therefore, refresh the state explicitly after the domain
was restored but before vCPUs are resumed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are not updating domain XML to new MAC address, just merely
setting host side of macvtap. But we don't need a MODIFY job for
that, QUERY is just fine.
This allows us to process the event should it occur during
migration.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Parts of the code that responds to the NIC_RX_FILTER_CHANGED
event are going to be re-used. Separate them into a function
(qemuDomainSyncRxFilter()) and move the code into qemu_domain.c
so that it can be re-used from other places of the driver.
There's one slight change though: instead of passing device alias
from the just received event to qemuMonitorQueryRxFilter(), I've
switched to using the alias stored in our domain definition. But
these two are guaranteed to be equal. virDomainDefFindDevice()
made sure about that, if nothing else.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need to call virNetDevRxFilterFree() explicitly, when
corresponding variables can be declared as
g_autoptr(virNetDevRxFilter).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The testdriver has xmlns support for overriding object default
state. demo it by pausing a VM
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
With the introduction of `libvirt` sub-directory to the cgroup topology
some of the cgroup configuration was moved into that sub-directory
together with the VM processes.
LXC uses virCgroupNewSelf() in the container process to detect cgroups
in order to report various data from cgroups inside the container.
We need to properly detect the new `libvirt` sub-directory here
otherwise LXC will report incorrect data.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The `legacy` mode is also valid so we need to take it into account as
well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Due to the setup of the modular daemon service files the reverting to non-socket
activated daemons could have never worked. The reason is that masking the
socket files prevents starting the daemons since they require (as in Requires=
rather than Wants= in the service file) the sockets. On top of that it creates
issues with some libvirt-guests setups and needlessly increases our support
matrix.
Nothing prevents users to modify their setup in a way that will still work
without socket activation, but supporting such setup only creates burden on our
part.
This technically reverts most of commit 59d30adacd except the change made to
the libvirtd manpage since the monolithic daemon still supports traditional mode
of starting even on systemd.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch adds a new worker qemuDomainGetStatsVm which reports the
stats returned by "query-stats" via qemuMonitorQueryStats for the VM
target.
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
This patch adds the stats queried by qemuMonitorQueryStats for vCPU and
add them according to their QOM device path
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
This patch adds a hashtable for storing the stats schema and a function
to refresh it by querying "query-stats-schemas" using
qemuMonitorQueryStatsSchema
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
As qemu becomes more modularized, it is important for libvirt to advertise
availability of the modularized functionality through capabilities. This
change adds channel devices to domain capabilities, allowing clients such
as virt-install to avoid using spicevmc channel devices when not supported
by the target qemu.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The error message doesn't really convey the information that 3d
acceleration works only for the 'virtio' model and similarly the same
error would be reported if qemu doesn't support acceleration, which is
hard to debug.
Split and clarify the errors.
Noticed in https://gitlab.com/libvirt/libvirt/-/issues/388
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use g_autofree in capabilities.c for some pointers still using manual cleanup,
and remove unnecessary cleanup.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Users can play all sorts of games with mount points. For
instance, they can unmount and mount back a hugetlbfs and only
after that attempt to hotplug memory.
This has an unfortunate consequence though. During memory
hotplug, when qemuProcessBuildDestroyMemoryPaths() is called the
path is created with very restrictive mode (0700) because under
the hood g_mkdir_with_parents(path, 0700) is called.
Therefore, create the driver generic portion of the path
separately.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2134009
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
During its initialization, the QEMU driver iterates over
hugetlbfs mount points, creating the driver specific path in each
of them ($prefix/libvirt/qemu). This path is created with very
wide mode (0777) because per-domain directories are then created
under it.
Separate this code into a function so that it can be re-used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
domcapabilities reports spice graphics support even against a minimal
qemu installation without spice modules. Checking for 'query-spice'
in the list of qmp commands supported by qemu is not sufficient to
determine spice support. Checking the command line produces acurrate
results.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As qemu becomes more modularized, it is important for libvirt to advertise
availability of the modularized functionality through capabilities. This
change adds USB redirect devices to domain capabilities, allowing clients
such as virt-install to avoid using redirdev devices when not supported
by the target qemu.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The validation of a '<filesystem type='mount'>' device fails if the
elements inside are not ordered in the order in the schema despite using
<interleave>. This is a bug in libxml2's validator as removing the
'<optional>' property from the definition of the 'type' attribute with
'mount' variable fixes the problem.
I've reported it as another instance of a seemingly related issue:
https://gitlab.gnome.org/GNOME/libxml2/-/issues/131
Meanwhile libvirt can re-arrange the schema by extracting the common
bits into a new definition and referencing them from each of the choice
groups explicitly.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/392
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The qemuxml2argvtest pseries-feature parse failure tests uses a symlink
to the pseries-features.xml test domain and control which feature it is
supposed to fail by excluding it from the capabilities list. The
advantage of this approach is that the same XML can be used in multiple
tests.
One downside is that any new pseries capability must be declared in all
existent tests, otherwise all other tests can break if this new
capability happens to be validated early in qemu_validate.c. Any new
parse_error test must declare all other existent capabilities.
Another downside is the fact that we're testing fairly improbable
scenarios: all pseries capabilities being tested here were introduced by
the same QEMU version, 4.2.0, at least as far as libvirt is aware of.
This means that it's no possible to have a scenario where, for example,
ccf-assist is not present but cfpc is. And last, but not the least, it's
getting in the way of our effort to convert all pseries tests to not use
explicit capabilities.
Changing all these tests to use DO_TEST_PARSE_ERROR_NOCAPS() will allow
us to test exactly what we want to test, which is the parse error given
for each feature if the binary does not have support for it. The XML
being used for each test can be simplified to just declare a single
feature. In the end we'll end up with more XML lines, but less
complexity inside qemuxml2argvtest.c.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Eliminate most of the pseries tests that are using explicit qemu caps
instead of CAPS_LATEST. The remaining tests will be handled in the next
patch.
The changes made are trivial: rename the .args/.err files to
ppc64-latest.(args/err) and do the required changes to match the newest
capabilities.
A notable expection were tests pseries-console-native,
pseries-serial-compat and pseries-serial+console-native. These are
aliases of the pseries-serial-native tests. In this case we needed to
re-create the symlink accordingly.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
No significant changes from the 7.0.0 capabilities.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
After addition of the new libvirt-client-qemu sub-package which is using
python bindings (thus creating a circular dependency between the libvirt
and libvirt-python projects) the integration jobs fail with:
Error:
Problem: conflicting requests
- nothing provides python3-libvirt >= 8.9.0-1.el9 needed by libvirt-client-qemu-8.9.0-1.el9.x86_64
The libvirt-python project now provides the RPMs in artifacts:
https://gitlab.com/libvirt/libvirt-python/-/merge_requests/96
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When libvirt is restarted, the qemuProcessShutdownReboot command is
executed to restore the VM that is being restarted. In this case, a
coredump may occur when we hotplug a pci device since the PCI address
hasn't be inited yet. Moving the initialization of address to the front
of qemuProcessShutdownOrReboot to ensure that we have the address inited.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If QEMU replies to device_del command with "DeviceNotFound"
error, then libvirt doesn't clean the device from the live
configuration.
This is because qemuMonitorDelDevice() returns -2 to
qemuDomainDeleteDevice() and instead of calling
qemuDomainRemoveDevice() the qemuDomainDetachDeviceLive() jumps
right onto cleanup label.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/359
Signed-off-by: Pierre LIBEAU <pierre.libeau@corp.ovh.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'potfile' job is lacking the 'variables' section which defines the
'NAME' variable used by the 'image' property resulting in the 'potfile'
job failing with:
Pulling docker image registry.gitlab.com/libvirt/libvirt/ci-:latest ...
WARNING: Failed to pull image with policy "always": invalid reference format (manager.go:235:0s)
ERROR: Job failed: failed to pull image "registry.gitlab.com/libvirt/libvirt/ci-:latest" with specified policies [always]: invalid reference format (manager.go:235:0s)
Fixes: 491d918502
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @vendor variable inside virQEMUCapsCPUDefsToModels() is
allocated, but never freed. But there is actually no need for it
to be allocated, because it merely passes a retval of
virCPUGetVendorForModel() (which returns a const string) to
virDomainCapsCPUModelsAdd() (which ten accepts the argument as
const string). Therefore, drop the g_strdup() call and fix the
type of the variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Bump the minimal required version to 0.56.0. Looking into our CI
this is the oldest version we install.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The get_pkgconfig_variable() method is deprecated in 0.56.0 and
we're recommended to use get_variable(pkgconfig : ...) instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The path() method is deprecated in 0.55.0 and we're recommended
to use full_path() instead. Interestingly, we were already doing
do in couple of places, but not all of them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The source_root() method is deprecated in 0.56.0 and we're
recommended to use project_source_root() instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The build_root() method is deprecated in 0.56.0 and we're
recommended to use project_build_root() instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This option can be used as a shortcut for creating a single XML with
just a CPU model name and no features:
$ virsh hypervisor-cpu-baseline --model Skylake-Server
<cpu mode='custom' match='exact'>
<model fallback='forbid'>Skylake-Server</model>
<feature policy='disable' name='avx512f'/>
<feature policy='disable' name='avx512dq'/>
<feature policy='disable' name='clwb'/>
<feature policy='disable' name='avx512cd'/>
<feature policy='disable' name='avx512bw'/>
<feature policy='disable' name='avx512vl'/>
<feature policy='disable' name='pku'/>
</cpu>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since commit "cpu_x86: Disable blockers from unusable CPU models"
(v3.8.0-99-g9c9620af1d) we explicitly disable CPU features reported by
QEMU as usability blockers for a particular CPU model when creating
baseline or host-model CPU definition. When QEMU changed canonical names
for some features (mostly those with '_' in their names), we forgot to
translate the blocker lists to names used by libvirt and the renamed
features would no longer be explicitly disabled in the created CPU model
even if they were reported as blockers by QEMU.
For example, on a host where EPYC CPU model has the following blockers
<blocker name='sha-ni'/>
<blocker name='mmxext'/>
<blocker name='fxsr-opt'/>
<blocker name='cr8legacy'/>
<blocker name='sse4a'/>
<blocker name='misalignsse'/>
<blocker name='osvw'/>
we would fail to disable 'fxsr-opt':
<cpu mode='custom' match='exact'>
<model fallback='forbid'>EPYC</model>
<feature policy='disable' name='sha-ni'/>
<feature policy='disable' name='mmxext'/>
<feature policy='disable' name='cr8legacy'/>
<feature policy='disable' name='sse4a'/>
<feature policy='disable' name='misalignsse'/>
<feature policy='disable' name='osvw'/>
<feature policy='disable' name='monitor'/>
</cpu>
The 'monitor' feature is disabled even though it is not reported as a
blocker by QEMU because libvirt's definition of EPYC includes the
feature while it is missing in EPYC definition in QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The API can be used to get usability blockers for an unusable CPU model,
which is not obvious. Let's explicitly document this behavior as it is
now mentioned in the documentation of domain capabilities XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch is effectively a no-op, but I wanted to initialize
.getVendorForModel explicitly as implementing this function does not
even make sense on ARM. The CPU models in our CPU map are only used for
describing host CPU in capabilities XML and cannot be used for guest CPU
definition in domain XML anyway. The CPU models listed as supported in
domain capabilities XML are just passed through from QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far QEMU driver does not get CPU model vendor from QEMU directly and
it has to ask the CPU driver for the info stored in CPU map.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Even though several CPU models from various vendors are reported as
usable on a given host, user may still want to use only those that match
the host vendor. Currently the only place where users can check the
vendor of each CPU model is our CPU map, which is considered internal
and users should not really be using it directly. So to allow for such
filtering we now advertise the vendor of each CPU model in domain
capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only part of qemuCaps both functions are interested in is the CPU
architecture. Changing them to expect just virArch makes the functions
more reusable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The ppc64 CPU code still has to load and parse the CPU map everytime it
needs to look at it, which can make some operations pretty slow. Other
archs already switched to loading the CPU map once and keeping the
parsed structure in memory. Let's switch ppc64 as well.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the function always returns 0, we can just return void and make
callers simpler.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In recent commit of v8.8.0-41-g41eb0f446c I've suggested during
review to put both xdr_free() calls under error label, assuming
that xdr_free() accepts NULL and thus is a NOP when the control
jumps onto the label even before either of @arg or @ret was
allocated. Well, turns out, xdr_free() does no accept NULL and
thus we have to guard its call. But since @dispatcher is already
set by the time either of the variables is allocated, we can
replace the condition from 'if (dispatcher)' to 'if (arg)' and
'if (ret)'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since they are simply normal RPC messages, the keep alive packets are
subject to the "max_client_requests" limit just like any API calls.
Thus, if a client hits the 'max_client_requests' limit and all the
pending API calls take a long time to complete, it may result in
keep-alives firing and dropping the client connection.
This has been seen by a number of users with the default value of
max_client_requests=5, by issuing 5 concurrent live migration
operations.
By printing a warning message when this happens, admins will be alerted
to the fact that their active clients are exceeding the default client
requests limit.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Libvirt provides QMP passthrough APIs for the QEMU driver and these are
exposed in virsh. It is not especially pleasant, however, using the raw
QMP JSON syntax. QEMU has a tool 'qmp-shell' which can speak QMP and
exposes a human friendly interactive shell. It is not possible to use
this with libvirt managed guest, however, since only one client can
attach to the QMP socket at any point in time. While it would be
possible to configure a second QMP socket for a VM, it may not be
an known requirement at the time the guest is provisioned.
The virt-qmp-proxy tool aims to solve this problem. It opens a UNIX
socket and listens for incoming client connections, speaking QMP on
the connected socket. It will forward any QMP commands received onto
the running libvirt QEMU guest, and forward any replies back to the
QMP client. It will also forward back events.
$ virsh start demo
$ virt-qmp-proxy demo demo.qmp &
$ qmp-shell demo.qmp
Welcome to the QMP low-level shell!
Connected to QEMU 6.2.0
(QEMU) query-kvm
{
"return": {
"enabled": true,
"present": true
}
}
Note this tool of course has the same risks as the raw libvirt
QMP passthrough. It is safe to run query commands to fetch information
but commands which change the QEMU state risk disrupting libvirt's
management of QEMU, potentially resulting in data loss/corruption in
the worst case. Any use of this tool will cause the guest to be marked
as tainted as an warning that it could be in an unexpected state.
Since this tool introduces a python dependency it is not desirable
to include it in any of the existing RPMs in libvirt. This tool is
also QEMU specific, so isn't appropriate to bundle with the generic
tools. Thus a new RPM is introduced 'libvirt-clients-qemu', to
contain additional QEMU specific tools, with extra external deps.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This refresh switches the CI for contributors to be triggered by merge
requests. Pushing to a branch in a fork will no longer run CI pipelines,
in order to avoid consuming CI minutes. To regain the original behaviour
contributors can opt-in to a pipeline on push
git push <remote> -o ci.variable=RUN_PIPELINE=1
This variable can also be set globally on the repository, through the
web UI options Settings -> CI/CD -> Variables, though this is not
recommended. Upstream repo pushes to branches will run CI.
The use of containers has changed in this update, with only the upstream
repo creating containers, in order to avoid consuming contributors'
limited storage quotas. A fork with existing container images may delete
them. Containers will be rebuilt upstream when pushing commits with CI
changes to the default branch. Any other scenario with CI changes will
simply install build pre-requisite packages in a throaway environment,
using the ci/buildenv/ scripts. These scripts may also be used on a
contributor's local machines.
With pipelines triggered by merge requests, it is also now possible to
workaround the inability of contributors to run pipelines if they have
run out of CI quota. A project member can trigger a pipeline from the
merge request, which will run in context of upstream, however, note
this should only be done after reviewing the code for any malicious
CI changes.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Remove the seldom used helper in favor of full virXMLParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the helper with more features to validate the root XML element name
instead of open-coding it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function provided just checking of the root XML node name which can
be easily moved into the caller wich doesn't do that already and
checking of the pointers which is trivial. Remove the helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the two outstanding uses to virXMLParseFileCtxt as they always
pass a filename and remove the helper macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most callers prefer using the XPath context. Convert the last user to
use virXMLParseFileCtxt and remove the helper macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLParse so that the code doesn't have to explicitly allocate
an XPath context and validate the root element.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most callers use virXMLParseStringCtxt. Convert the last use case
and remove the helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLParseStringCtxt instead of virXMLParseString since the code
requires a XPath context anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLParse's features to validate the top level element and fetch
the XPath context.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virDomainObjParseFile is the only caller of virDomainObjParseNode.
The code can be merged into it, simplified by using virXMLParse and
the function removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace virNetworkDefParseString/File by direct calls to
virNetworkDefParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both callers can be easily converted to call virNetworkDefParseXML
directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function was not used. Remove it and merge virInterfaceDefParse
into virInterfaceDefParseString.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both callers be easily made to call virInterfaceDefParseXML directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the thin wrappers virNodeDeviceDefParseString/File by directly
calling the main parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both callers be easily made to call virNodeDeviceDefParseXML directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace virNWFilterDefParseString/File with the common function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLParse to fetch the XML context and validate the top level XML
element name so that virNWFilterDefParseNode is no longer needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename virDomainBackupDefParse to virDomainBackupDefParseXML and use
it in place of virDomainBackupDefParseNode. This is possible as
virXMLParse can be used to replace XPath context allocation and root
node checking.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use features of virXMLParse to validate root node and fetch XPath
context.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the virSecretDefParseFile/String shims by calls to
virSecretDefParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename it to virSecretParseXML and move the root node validation and
context fetching into the caller (by properly calling virXMLParse).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Check the root XML node name and fetch XPath context by properly
configuring virXMLParse. Callers can use virDomainSnapshotDefParse
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the virStorageVolDefParseFile/String shim functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Proper use of virXMLParse replaces everything the function provides.
Callers can use virStorageVolDefParseXML instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the virStoragePoolDefParseString/File thin wrappers by
virStoragePoolDefParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace it by proper use of virXMLParse to validate the root node and
allocate the context. The use in the test driver can be directly
replaced by virStoragePoolDefParseXML as both are validated.
The change to the storage driver isn't trivial though as it requires
careful xpath context juggling to parse the nested volumes properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When replacing a definition node by contents of a file the root node in
the file must match the replaced node.
Enforce that by passing the original node name as the 'rootnode'
argument of virXMLParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virXMLParse ignores the 'url' argument which is what 'type' was passed
to it as when a filename is used as source for the XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move few variables definitions closer to usage, add comments explaining
what's happening and simplify the control flow.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the two helpers virNetworkPortDefParseString/File with the
common helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is exported but used only intenally, additionally
everything it did for the only caller can be replaced by properly using
virXMLParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't validate the root node and don't allocate a private XPath context
when virXMLParse can do that internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the virNWFilterBindingDefParseString/File thin wrappers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fetch the XPath context and validate the node by using virXMLParse's
features.
This allows to completely remove virNWFilterBindingDefParseNode as
all callers now properly validate the root element name and have a XPath
context handy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virVBoxSnapshotConfGetRWDisksPathsFromLibvirtXML and
virVBoxSnapshotConfGetRODisksPathsFromLibvirtXML were doing the same
thing, except for one XPath query.
Factor out the common code into a helper and bring it up to modern
standard.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the redundant root node checking and XPath context creation by
using virXMLParse properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The generic helper also has helper code to validate the root element and
create an XPath context. Many places in the code duplicate code for
doing these operations.
Extend the helper to provide all arguments and fix all callers.
In many cases this patch refactors the passing of the 'validate'
field into a separate variable to avoid quirky looking arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
libvirt-derived repos recently changed the way how and when CI
containers are built and for that a different naming scheme was adopted
to differentiate between the 2. Update the integration pipeline config
to reflect this change.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch 'fixes' the behavior of the persistent_state TPM domain XML
attribute that intends to preserve the state of the TPM but should not
keep the state around on all the hosts a VM has been migrated to. It
removes the TPM state directory structure from the source host upon
successful migration when non-shared storage is used. Similarly, it
removes it from the destination host upon migration failure when
non-shared storage is used.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add UNDEFINE_TPM and UNDEFINE_KEEP_TPM flags to qemuDomainUndefineFlags()
API and --tpm and --keep-tpm to 'virsh undefine'. Pass the
virDomainUndefineFlagsValues via qemuDomainRemoveInactive()
from qemuDomainUndefineFlags() all the way down to
qemuTPMEmulatorCleanupHost() and delete TPM storage there considering that
the UNDEFINE_TPM flag has priority over the persistent_state attribute
from the domain XML. Pass 0 in all other API call sites to
qemuDomainRemoveInactive() for now.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our public API docs use the hyphenated version with capital OR. Fix the
virXMLProp* helpers to use the same syntax.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We commonly use 'const char *name' instead of 'const char* name'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Sadly some devices provide invalid VPD data even with fully updated
firmware. Former hardning like 600f580d "PCI VPD: Skip fields with
invalid values" have already helped for those to some extent.
But if one happens to have such a device installed in the system,
despite all other things working properly the log potentially
flooded with messages like:
internal error: The keyword is not comprised only of uppercase ASCII
letters or digits
internal error: A field data length violates the resource length boundary.
The user can't do anything about it to change that, they will be there on
any libvirt restart and potentially distract from other more important
issues.
Since the vpd decoding is implemented rather resilient (if parsing fails
all goes on fine, the respective device just has no VPD data populated
eventually) we can lower those from virReportError(VIR_ERR_INTERNAL_ERROR
to just VIR_INFO. If needed for debugging people can set the level
accordingly, but otherwise we would no more fill the logs with errors
without a strong reason.
Fixes: https://launchpad.net/bugs/1990949
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Riscv64 usually uses u-boot as external -kernel and a loader from
the open implementation of RISC-V SBI. The paths for those binaries
as packaged in Debian and Ubuntu are in paths which are usually
forbidden to be added by the user under /usr/lib...
People used to start riscv64 guests only manually via qemu cmdline,
but trying to encapsulate that via libvirt now causes failures when
starting the guest due to the apparmor isolation not allowing that:
virt-aa-helper: error: skipped restricted file
virt-aa-helper: error: invalid VM definition
Explicitly allow the sub-paths used by u-boot-qemu and opensbi
under /usr/lib/ as readonly rules.
Fixes: https://launchpad.net/bugs/1990499
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we no longer use the capability, stop probing for existence
of 'virtual-css-bridge' and its properties.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduced in libvirt by:
commit f245a9791c
qemu: introduce capability for virtual-css-bridge
Which mentions that its support was in QEMU 2.7.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability was introduced by libvirt commit:
commit 263e65fd20
qemu: introduce vfio-ccw capability
It probes for the cssid-unrestricted property of
virtual-css-bridge, which was introduced in QEMU v2.12 by:
commit 99577c492fb2916165ed9bc215f058877f0a4106
s390x/css: unrestrict cssids
Since we bumped the minimum QEMU version to 4.2.0, assume
this property is always present.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Among the usual changes, this puts the virtio memballoon on the CCW bus.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In virNetServerProgramDispatchCall, The arg is passed as a void*
and used to point to a certain struct depended on the dispatcher,
so I think it's the memory of the struct's member that leaks and
this memory shuld be freed by xdr_free.
In virNetServerClientNew, client->rx is assigned by invoking
virNetServerClientNew, but isn't freed if client->privateData's
initialization failed, which leads to a memory leak. Thanks to
Liang Peng's suggestion, put virNetMessageFree(client->rx) into
virNetServerClientDispose() to release the memory.
Signed-off-by: jiangjiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Apart from it being a long time ago the 'openvz' driver is also rarely
used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Parse the element only when the network type requires it and assign it
directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Specifically rework of parsing of the 'managed' attribute simplifies the
code greatly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Base whether virtualport is supported for a given interface on a new
variable named 'virtualport_flags' which also configures the parser for
the virtualports subelement and fill it in the appropriate interface
type branches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The moved code is pure validation of semantics of the definition and not
actual parsed values. Move it to the validation code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This also removes the confusing use of variables named 'tmpNode' and
'tmp_node' right next to each other.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
VIR_XPATH_NODE_AUTORESTORE_NAME is a more generic version of the
VIR_XPATH_NODE_AUTORESTORE macro used to save the 'node' inside a XPath
context struct. The new macro allows specifying the name of the variable
used to save the context so that it can be used multiple times inside a
function's nested scopes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the code fetching the model of the net device before the main code
parsing individual device types so that the data is available before the
upcoming refactor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a helper for parsing long long values from XML properties with
semantics like virXMLPropInt.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the individual 'if' clauses to a switch statement.
By moving the check that 'source_node' is non-null inside of each case
rather we will be able to move more type specific code into the switch
statement when it will be refactored in subsequent patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to virXMLPropString it extracts a string but reports an error
similar to the newer virXMLProp helpers if the attribute is not present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All callers treat NULL as if the string is not present in the XML.
Adjust the description so that it's implied that it's not an error and
thus also no error reporting is expected.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The helper function extracts a UUID with semantics similar to other
helpers we have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In certain cases it's inconvenient to move the XPath's context current
node in the caller. Add a 'node' argument and override it inside the
function. VIR_XPATH_NODE_AUTORESTORE handles the cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Do the XPath fetches first as they don't require cleanup and rename
'cleanup' to 'error' and take it only on failure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use two separate variables for the nodes and count instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The variables are only used in code paths which can't fail after they
are allocated.
Additionally decrease scope of the variables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace ad-hoc logic that fills the default by use of the proper helper
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the code into virDomainNetDefParseXMLDriver. Some local
variables were renamed and the scope decreased.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move it into an independent block and move temporary variables locally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some values were extracted into a temporary variable and then assigned
to the definition later without a modification.
Directly assign them instead.
One slight modification was done to 'ifname' which was cleared in
certain cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the last two variables having inline cleanup to automatic
cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We should explicitly depend on this package as we use some macros
defined by files that are installed from systemd-rpm-macros.
Currently the build works only because some of our other build
dependencies pull in systemd which will install systemd-rpm-macros if
rpm-build is installed as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a follow-up to fbd6b2480a, adding a link to the latest libvirt
package for openSUSE.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As of GLib commit c9874f817be51d3b652457daef3b10766b59db9a,
relesed in GLib 2.73, the g_dbus_connection_call_with_unix_fd_list_sync()
function is not defined always, only when G_OS_UNIX condition is
set. This is also the reason why our virGDBusCallMethodWithFD()
function is guarded with that macro. But virgdbusmock is compiled
always, even on !UNIX systems, e.g. mingw. Therefore, we need to
use the same macro to condition compile its mock.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The callback struct does not always have to be set which could
cause a dereferencing of a NULL pointer. This patch adds check
against NULL in missing places before dereferencing.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Let me take you on a short trip to history. A long time ago,
libvirt would configure all QEMUs to use $hugetlbfs/libvirt/qemu
for their hugepages setup. This was problematic, because it did
not allow enough separation between guests. Therefore in
v3.0.0-rc1~367 the path changed to a per-domain basis:
$hugetlbfs/libvirt/qemu/$domainShortName
And to help with migration on daemon restart a call to
qemuProcessBuildDestroyMemoryPaths() was added to
qemuProcessReconnect() (well, it was named
qemuProcessBuildDestroyHugepagesPath() back then, see
v3.10.0-rc1~174). This was desirable then, because the memory
hotplug code did not call the function, it simply assumes
per-domain paths to exist. But this changed in v3.5.0-rc1~92
after which the per-domain paths are created on memory hotplug
too.
Therefore, it's no longer necessary to create these paths in
qemuProcessReconnect(). They are created exactly when needed
(domain startup and memory hotplug).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When creating a node in QEMU's namespace the whole link chain is
created with it. Here, we use g_file_read_link() from the child
(running inside the namespace) to learn whether a link exists and
points to expected target. Now, when building the namespace there
can't be any symlinks and this g_file_read_link() returns NULL
always. And because we pass a local GError variable to it, glib
tries to set it to a localized error message. This comes with
creating a (static) hash table inside of g_strerror() and is
guarded with a mutex. The hash table is also allocated using
GSlice allocator instead of g_malloc, and since the latter is
safe to use after fork (because it's documented to use plain
malloc), glib went with the former, naturally. Now, GSlice
allocator has plenty of internal mutexes and thus hitting a
locked mutex is not that hard.
Fortunately, we don't care about any error from
g_file_read_link() and thus we can pass NULL which avoids calling
g_strerror().
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2120965
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The qemuNamespaceMknodPaths() function is responsible for
creating files/directories in QEMU's mount namespace. When
called, it is given list of paths that have to be created in the
namespace. It processes this list and removes items that are not
directly under /dev, but on a 'shared' filesystem (note that all
other mount points are preserved). And it may so happen that
after this pre-process no files/directories need to be created in
the namespace. If that's the case, exit early and avoid
fork()-ing only to find out the same.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Besides the -cpu host, The host-phys-bits=on applies to custom or max
cpu model, So the host-passthrough validation check is unnecessary for
maxphysaddr with mode='passthrough'.
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
In case of variable 'oldjob' (job structure) in
qemuProcessReconnect() the cb pointer was just copied from the
existing job structure in virDomainObjPreserveJob(). This caused
the job and oldjob sharing the same pointer, which was later
freed at the end of the qemuProcessReconnect() function by
automatic call to virDomainObjClearJob(). This caused an invalid
read in and subsequent daemon crash as the job structure was
trying to read cb which had been already freed.
This patch changes the copying to g_memdup that allocates
different pointer, which can be later safely freed.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
rpmbuild is complaining it's not recommended to have unversioned
Obsoletes. On the other hand using dynamic version/release is a bit too
much as we know in which release a particular subpackage was removed.
Let's just use the corresponding version in both cases to be consistent
with all other Obsoletes in our spec file.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For prevent memory leak and easier to use, So change
virDomainEventTunableNew to get virTypedParameterPtr *params
and set it = NULL.
Signed-off-by: lu zhipeng <luzhipeng@cestc.cn>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
After some debugging and discussion with systemd team it turns out we
are misusing the ordering in libvirt-guests.service. That happened
because we want to support both monolithic and modular daemon setups and
on top of that we also want to support socket activation and services
without socket activation. Unfortunately this is impossible to express
in the unit file because of how transactions are handled in systemd when
dependencies are resolved and multiple actions (jobs) are queued. For
explanation from Michal Sekletar see comment #7 in the BZ this patch is
fixing:
https://bugzilla.redhat.com/show_bug.cgi?id=1964855#c7
In order to support all the scenarios this patch also amends the
manpages so that users that are changing the default can also read how
to correct the dependency ordering in libvirt-guests unit file.
Ideally we would also keep the existing configuration during upgrade,
but due to our huge support matrix this seems hardly feasible as it
could introduce even more problems.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When reconnecting to a running QEMU process, we construct the
per-domain path in all hugetlbfs mounts. This is a relict from
the past (v3.4.0-100-g5b24d25062) where we switched to a
per-domain path and we want to create those paths when libvirtd
restarts on upgrade.
And with namespaces enabled there is one corner case where the
path is not created. In fact an error is reported and the
reconnect fails. Ideally, all mount events are propagated into
the QEMU's namespace. And they probably are, except when the
target path does not exist inside the namespace. Now, it's pretty
common for users to mount hugetlbfs under /dev (e.g.
/dev/hugepages), but if domain is started without hugepages (or
more specifically - private hugetlbfs path wasn't created on
domain startup), then the reconnect code tries to create it.
But it fails to do so, well, it fails to set seclabels on the
path because, because the path does not exist in the private
namespace. And it doesn't exist because we specifically create
only a subset of all possible /dev nodes. Therefore, the mount
event, whilst propagated, is not successful and hence the
filesystem is not mounted. We have to do it ourselves.
If hugetlbfs is mount anywhere else there's no problem and this
is effectively a dead code.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2123196
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Sometimes it may come handy to just bind mount a directory/file
into domain's namespace. Implement a thin wrapper over
qemuNamespaceMknodPaths() which has all the logic we need.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When setting up namespace for QEMU we look at mount points under
/dev (like /dev/pts, /dev/mqueue/, etc.) because we want to
preserve those (which is done by moving them to a temp location,
unshare(), and then moving them back). We have a convenience
helper - qemuDomainGetPreservedMounts() - that processes the
mount table and (optionally) moves the other filesystems too.
This helper is also used when attempting to create a path in NS,
because the path, while starting with "/dev/" prefix, may
actually lead to one of those filesystems that we preserved.
And here comes the corner case: while we require the parent mount
table to be in shared mode (equivalent of `mount --make-rshared /'),
these mount events propagate iff the target path exist inside the
slave mount table (= QEMU's private namespace). And since we
create only a subset of /dev nodes, well, that assumption is not
always the case.
For instance, assume that a domain is already running, no
hugepages were configured for it nor any hugetlbfs is mounted.
Now, when a hugetlbfs is mounted into '/dev/hugepages', this is
propagated into the QEMU's namespace, but since the target dir
does not exist in the private /dev, the FS is not mounted in the
namespace.
Fortunately, this difference between namespaces is visible when
comparing /proc/mounts and /proc/$PID/mounts (where PID is the
QEMU's PID). Therefore, if possible we should look at the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When creating a path in a domain's mount namespace we try to set
ACLs on it, so that it's a verbatim copy of the path in parent's
namespace. The ACLs are queried upfront (by
qemuNamespaceMknodItemInit()) but this is fault tolerant so the
pointer to ACLs might be NULL (meaning no ACLs were queried, for
instance because the underlying filesystem does not support
them). But then we take this NULL and pass it to virFileSetACLs()
which immediately returns an error because NULL is invalid value.
Mimic what we do with SELinux label - only set ACLs if they are
non-NULL which includes symlinks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When retiring QEMU_CAPS_BLOCKDEV_HOSTDEV_SCSI capability the
commit removed a bit too much. Previously, all other devices than
VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI were ignored in
qemuDomainDeviceHostdevDefPostParseRestoreBackendAlias(). But the
commit in question removed not only the capability check but also
this return early statement. Restore it back.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2129239
Fixes: dc8dbb27d4
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
For NVMe disks we skip setting SELinux label on corresponding
VFIO group (/dev/vfio/X). This bug is only visible with
namespaces and goes as follows:
1) libvirt assigns NVMe disk to vfio-pci driver,
2) kernel creates /dev/vfio/X node with generic device_t SELinux
label,
3) our namespace code creates the exact copy of the node in
domain's private /dev,
4) SELinux policy kicks in an changes the label on the node to
vfio_device_t (in the top most namespace),
5) libvirt tells QEMU to attach the NVMe disk, which is denied by
SELinux policy.
While one can argue that kernel should have created the
/dev/vfio/X node with the correct SELinux label from the
beginning (step 2), libvirt can't rely on that and needs to set
label on its own.
Surprisingly, I already wrote the code that aims on this specific
case (v6.0.0-rc1~241), but because of a shortcut we take earlier
it is never ran. The reason is that
virStorageSourceIsLocalStorage() considers NVMe disks as
non-local because their source is not accessible via src->path
(or even if it is, it's not a local path).
Therefore, do not exit early for NVMe disks and let the function
continue.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2121441
Fixes: 284a12bae0
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Updated example covers:
* UUID
* CPU model, vendor, microcode, signature, counters,
topology, maxphysaddr, features,
* Power management
* NUMA page size info, multiple nodes, CPU topology IDs, distances
* CPU cache bank info
* Multiple secmodels
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'cb' and 'jobDataPrivateCb' pointers are stored in the job object
but made point to the memory owned by the virDomainXMLOption struct in
the callers.
Since the 'virdomainjob' module isn't in control the lifetime of the
virDomainXMLOption, which in some cases is freed before the domain job
data, freed memory would be dereferenced in some cases.
Copy the structs from virDomainXMLOption to ensure the lifetime. This is
possible since the callback functions are immutable.
Fixes: 84e9fd068c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
According to repology.org:
RHEL-8: 0.9.4
RHEL-9: 0.9.6
Debian 11: 0.9.5
openSUSE Leap 15.3: 0.8.7
Ubuntu 20.04: 0.9.3
And the rest of distros has something newer anyways. Requiring
0.8.1 or newer allows us to drop the terrible hack where we
rename functions at meson level using #define. Note, 0.8.0 is
the version of libssh where the rename happened. It also allows
us to stick with SHA-256 hash algorithm for public keys.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This updates the FreeBSD 13 image to 13.1 which should fix the
symbol lookup errors seen in CI recently.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the basic configuration with monolithic libvirtd users are required
to also start virtlogd. Add a general note with a specific example
hinting that this is needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To prevent surprises when a build doesn't in fact contain the required
functionality suggest that users force-enable required modules.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Only the preparation of sources differs between a build from a git
checkout vs a build from tarball. Restructure the docs to outline the
difference and combine information on how to configure libvirt.
Most notably the suggestion to use '-Dsystem=true' was present only for
the steps to build a git checkout.
Suggest also running the testsuite as part of the build step.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Create a section for instructions on how to install the built binaries
rather than mentioning it multiple times.
Add a note that installing over your distro-provided packages will most
likely break your instalation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Running from build directory isn't strictly tied to the git-checkout
build so make a new section for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Users should be encouraged to install libvirt from the distro's repos in
the first place.
Also encourage distro-specific ways to get newer versions, rather than
building from source manually.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When a hypervisor driver is not compiled in and a user enables the
monolithic libvirtd, they get the following misleading error:
$ virsh -c qemu:///system
error: failed to connect to the hypervisor
error: Failed to connect socket to '/var/run/libvirt/virtqemud-sock': No such file or directory
The issue is that the daemon side of the remote driver can't find the
appropriate driver, but the remote driver always accepts everything and
thus attempts to delegate further, which in case of libvirtd makes no
sense.
Refuse opening a connection for local URIS even when the requested
driver is not registered in case when we are inside 'libvirtd' as
libvirtd doesn't have anything to delegate to.
$ virsh -c qemu:///system
error: failed to connect to the hypervisor
error: no connection driver available for qemu:///system
Discovered when investigating https://gitlab.com/libvirt/libvirt/-/issues/370
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patch which is fixing the opening of drivers in monolithic mode
needs to know whether we are inside 'libvirtd' but the code where the
decision needs to happen is not re-compiled per daemon. Thus we need to
pass this information to the stateful driver init function so that it
can be remebered.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for 'driver' and return error right away to
avoid the 'cleanup' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virConnectOpenAuth provides an unified interface with using 'flags' to
select the proper mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Configuring an URI alias such as
uri_aliases = [
"blah=qemu://invaliduri@@@",
]
Results in a double free when the alias is used:
$ virsh -c blah
free(): double free detected in tcache 2
Aborted (core dumped)
This happens as the 'alias' variable is first assigned to 'uristr' which
is cleared in the 'failed' label and then is explicitly freed again.
Fix this by stealing the alias into 'uristr' and removing the
unnecessary freeing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two points I've taken for granted:
1) the mount points are set before starting a guest,
2) the / and its submounts are marked as shared, so that mount
events propagate into child namespaces when assumption 1) is
not held.
But what's obvious to me might not be obvious to our users.
Document these known limitations.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2123196
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The aim of qemuProcessNeedHugepagesPath() is to determine whether
a hugetlbfs mount point is required for given domain (as in
whether qemuBuildMemoryBackendProps() picks up
memory-backend-file pointing to a hugetlbfs mount point). Well,
when domain is configured to use memfd backend then that
condition can never be true. Therefore, skip creating domain's
private path under hugetlbfs mount points.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The bhyve driver still has some frames larger than 2048 bytes, so we
need to keep the limit as is.
The CI failure was masked by the Freebsd-13 failing for unrelated
reasons.
This reverts commit 46302172d4
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
After recent cleanups we can now restrict the maximum stack frame size
to 2k.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
At time of this patch struct 'virDomainDef' has 1736 bytes. Allocate it
dynamically to keep the stack frame size in reasonable values.
This patch also fixes remoteRelayDomainQemuMonitorEventCheckACL, where
we didn't clear the stack'd variable prior to use. Fortunately for now
the code didn't look at anything else than what the code overwrote.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
At time of writing DEVLINK_ATTR_MAX equals to 176, thus the stack'd size
of the pointer array is almost 1.4kiB. Allocate it dynamically.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce 'virLXCProcessReportStartupLogError' which simplifies the
error handling on startup of the LXC process when reading of the error
log is needed.
This function has unusual return value semantics but it helps to make
the callers simpler.
This patch also removes 2 1k stack'd buffers from virLXCProcessStart.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that all preceding flags were deleted we can fix the enum value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuMonitorJSONMigrate' is called from:
- qemuMonitorMigrateToHost
- qemuMonitorMigrateToSocket
Both of the above function are called only from
qemuMigrationSrcStart.
- qemuMonitorMigrateToFd
- called from:
- qemuMigrationSrcToFile
Both instances here pass QEMU_MONITOR_MIGRATE_BACKGROUND
directly.
- qemuMigrationSrcStart
qemuMigrationSrcStart is then called from qemuMigrationSrcRun and
qemuMigrationSrcResume, both of which always add QEMU_MONITOR_MIGRATE_BACKGROUND
to the flags.
Thus any caller always passes the flag so that we can remove the flag
altogether.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the support for enabling the 'blk' and 'inc' parameters of the
'migrate' command as there are no users any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU supported the NBD server required for the new-style migration for a
long time already and when coupled with -blockdev the old style
migration doesn't even work, thus remove support for it.
This patch modifies the code to check that the destination returned data
for the NBD migration and returns an error if it did not and deletes the
fallback code paths which would not work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The NBD server (detected via 'nbd-server-start' qmp command) was added
to qemu in v1.3 and can't be compiled out.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 6111b23522 removing pre-blockdev code paths I've
improperly refactored the setup of non-shared storage migration.
Specifically the code checking that there are disks and setting up the
NBD data in the migration cookie was originally outside of the loop
checking the user provided list of specific disks to migrate, but became
part of the block as it was not un-indented when a higher level block
was being removed.
The above caused that if non-shared storage migration is requested, but
the user doesn't provide the list of disks to migrate (thus implying to
migrate every appropriate disk) the code doesn't actually setup the
migration and then later on falls back to the old-style migration which
no longer works with blockdev.
Move the check that there's anything to migrate out of the
'nmigrate_disks' block.
Fixes: 6111b23522
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2125111
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/373
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adding supposedly secure cleanup for secrets in anything related to the
XML parser is pointless because there are multiple other un-sanitized
copies of the full XML and the XML parser state at the very least.
Similarly in case RPC was used to transport the XML the RPC buffers are
not sanitized.
Additionally this patch was incomplete as it didn't sanitize the
password in the cleanup function for virDomainGraphicsAuthDef.
This reverts commit 51f8130d78
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Although these and functions in the following two patches are for
now just being used by the qemu driver, it makes sense to have all
begin job functions in the same file.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch removes virCHDomainObjEndJob() and replaces it with
call to the generalized virDomainObjEndJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch removes virLXCDomainObjEndJob() and replaces it with
call to the generalized virDomainObjEndJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch removes libxlDomainObjEndJob() and replaces it with
call to the generalized virDomainObjEndJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch moves qemuDomainObjEndJob() into
src/conf/virdomainjob as universal virDomainObjEndJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch removes virCHDomainObjBeginJob() and replaces it with
call to the generalized virDomainObjBeginJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch removes virLXCDomainObjBeginJob() and replaces it with
call to the generalized virDomainObjBeginJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch removes libxlDomainObjBeginJob() and replaces it with
generalized virDomainObjBeginJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch moves qemuDomainObjBeginJob() into
src/conf/virdomainjob as universal virDomainObjBeginJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch uses the job object directly in the domain object and
removes the job object from private data of all drivers that use
it as well as other relevant code (initializing and freeing the
structure).
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds the generalized job object into the domain object
so that it can be used by all drivers without the need to extract
it from the private data.
Because of this, the job object needs to be created and set
during the creation of the domain object. This patch also extends
xmlopt with possible job config containing virDomainJobObj
callbacks, its private data callbacks and one variable
(maxQueuedJobs).
This patch includes:
* addition of virDomainJobObj into virDomainObj (used in the
following patches)
* extending xmlopt with job config structure
* new function for freeing the virDomainJobObj
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
There may be a case that the callback structure will exist with
no callbacks (following patches). This patch adds check for
specific callbacks before using them.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The following patches move job object as a member into the domain
object. Because of this, domain_conf (where the domain object is
defined) needs to import the file with the job object.
It makes sense to move jobs to the same level as the domain_conf:
into src/conf/
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Struct virDomainJobData is meant for statistics for async jobs.
It was used to keep track of only two attributes, one of which is
also in the generalized virDomainJobObj ("started") and one which
is always set to the same value, if any job is active
("jobType").
This patch removes usage & allocation of virDomainJobData
structure and rewrites libxlDomainJobUpdateTime() into more
suitable libxlDomainJobGetTimeElapsed().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch moves qemuDomainObjBeginJobInternal() as
virDomainObjBeginJobInternal() into hypervisor in order to be
used by other hypervisors in the following patches.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that we assume all the virtio capabilities, this function does not
check anything.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All the supported QEMU versions should have iothread support
on the virtio-scsi controllers if they are compiled in.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced by QEMU commit 0846e6359c407e372f446723b8b7b09ac20d0f03
released in QEMU 1.3.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Function daemonConfigFilePath() will assign a path to
remote_config_file definitely and the path will be validated
in following codes. So, it's unnecessary to return value
from daemonConfigFilePath() and check the returned value.
Signed-off-by: jiangjiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The password may not be valid in the error branch, but for
higher security, it's better to clean up the memory before
freeing it.
Signed-off-by: jiangjiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
We have always considered "migrate_cancel" QMP command to return after
successfully cancelling the migration. But this is no longer true (to be
honest I'm not sure it ever was) as it just changes the migration state
to "cancelling". In most cases the migration is canceled pretty quickly
and we don't really notice anything, but sometimes it takes so long we
even get to clearing migration capabilities before the migration is
actually canceled, which fails as capabilities can only be changed when
no migration is running. So to avoid this issue, we can wait for the
migration to be really canceled after sending migrate_cancel. The only
place where we don't need synchronous behavior is when we're cancelling
migration on user's request while it is actively watched by another
thread.
https://bugzilla.redhat.com/show_bug.cgi?id=2114866
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We will need a little bit more code around qemuMonitorMigrateCancel to
make sure it works as expected. The new qemuMigrationSrcCancel helper
will avoid repeating the code in several places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Let's call this qemuMigrationSrcCancelUnattended as the function is
supposed to be used when no other thread is watching the migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Just before pushing my earlier commit I've switch order of two
arguments of virProcessGetStatInfo() (as suggested in review).
However, I forgot to swap the arguments in
qemuDomainGetStatsCpuProc() which leads to userTime and sysTime
being swapped.
Fixes: 044b8744d6
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use approach similar to virFileIsSharedFsFUSE to declaratively handle
the filesystem magic numbers mapping to libvirt's fstypes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The filesystem type magic constant was added for the 'quobyte' shared
filesystem in commit 451094bd15 but is present neither in the kernel
sources nor in coreutils which we've historically used as source of
information.
Since the code dealing with FUSE-based filesystems doesn't need the
constant we can remove it and the now-dead check for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the code works properly as no code path is specifically wanting to
check for glusterfs, we should properly declare glusterfs as a separate
from GFS2.
Fixes: 478da65fb4
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virFileIsSharedFixFUSE' was used to update the 'f_type' field for
certain shared filesystem types.
This patch renames it to 'virFileIsSharedFsFUSE' and makes it directly
return whether the FUSE filesystem is shared or not and simplifies
additions to the list of shared FUSE filesystems.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Automatically free memory of 'canonPath' so that the failure of
'setmntent' doesn't have to go to 'cleanup'. This allows us to remove
the cleanup section and the 'ret' variable as the rest of the function
can't fail.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Expand some of the uncommon or unobvious filesystem names in a comment.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We populate the bits individually so unsigned is the proper type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit d7ae7ce363 forgot to clean up unused error output files
'boot-dev+order.err' and 'boot-menu-enable-with-timeout-invalid'
after converting tests to DO_TEST_CAPS_LATEST.
Fixes: d7ae7ce363
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
For domains started under session URI, we don't set up CGroups
(well, how could we since we're not running as root anyways).
Nevertheless, fetching CPU statistics exits early because of
lacking cpuacct controller. But with recent extension to
virProcessGetStatInfo() we can get the values we need from the
proc filesystem. Implement the fallback for the session URI as
some of virt tools rely on cpu.* stats to be reported (virt-top,
virt-manager).
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/353
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1693707
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virProcessGetStatInfo() helper parses /proc stat file for
given PID and/or TID and reports cumulative cpuTime which is just
a sum of user and sys times. But in near future, we'll need those
times separately, so make the function return them too (if caller
desires).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu-7.1 is released now. Update the capabilities for the final time.
Notable change since last update:
- 'exit-failure' action for 'panic' lifecycle action added
The 'min-xlevel' change is related to upgrade of the host kernel.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The replacement is 'serial' and 'parallel' respectively introduced at
least in qemu-2.9 and the old versions are deprecated since qemu-6.0
(qemu commit 5965243641d797b22 ).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of the properties use '-1' as default and the code omits formatting
them when the property is '-1'. Additionally subsequent validation code
rejects all other negative values anyways.
Since we've never formatted '-1' into an XML formatted by libvirt we can
make the parser more strict, as we will never fail to parse existing
on-disk libvirt-owned XMLs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2121627
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move some checks earlier so that they are not tucked at the back of the
block of code doing the actual parsing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'index' is parsed to fit into a signed int but not have negative values.
virXMLPropInt can do that internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor all cases which use virXMLPropInt and then subsequently check
that the parsed value is not '-1'/negative by using the VIR_XML_PROP_NONNEGATIVE
flag for virXMLPropInt.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code attempted to report an error if the user added the 'index'
attribute to the 'target' element, but neglected to actually return an
error code.
Fix it by using the VIR_XML_PROP_NONNEGATIVE flag for virXMLPropInt
which refuses user passed negative numbers.
Fixes: 020dd80ecb
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Code was not indented properly for one of the nested conditions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rewrite the code to use virXMLFormat element so that we can avoid a
bunch of unnecessary checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the PCI controller code into virDomainControllerDefFormatPCI.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Typecast the controller type variable and add all cases to the switch
statement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virtio-*-(non-)-transitional device models which replace the use of
'disable-legacy'/'disable-modern' features were introduced in qemu-4.0.
This means we can remove the specific parts of the code for formatting
the old-style device options and replace all other code to solely depend
on the QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Turn them into DO_TEST_CAPS_LATEST tests so that we are closer to real
world.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As noted by the comments the only difference was the qemu capabilities
asserted. Now that we use only real caps for this test case it makes no
sense to have two copies.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Turn them into DO_TEST_CAPS_VER bound to qemu-4.2 to show the minimum
amount of change. We already have DO_TEST_CAPS_LATEST versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Further patches will try to remove QEMU_CAPS_VIRTIO_PCI_DISABLE_LEGACY,
so add few more modern tests before doing that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch from QEMU_CAPS_VIRTIO_PCI_DISABLE_LEGACY to
QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL as it has no impact on the test
output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL is the evolution of
QEMU_CAPS_VIRTIO_PCI_DISABLE_LEGACY from qemu's point of view. Make sure
that we consider both when assesing whether a device belongs on PCIe.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move all definition under the <domain> element into a separate
definition so that it can be referenced from elements with other names.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the overrides into a single file so that later patches can add
another top level element 'inactiveDomain' used in snapshots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replacing the 'virTestLoadFile' + 'virTestDifferenceFull' by '
virTestCompareToFile' allows to use the VIR_TEST_REGENERATE_OUTPUT=1
option to also generate the output file if it doesn't exist.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Illustrate the problem in the schema fixed by previous commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the full link to the backup XML description page and use the proper
anchor after html->RST coversion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Checkpoints created via virDomainCheckpointCreateXML are generally not
very useful as they need to be coupled with a backup.
Add a disclaimer to the docs explaining why users should use
virDomainBackupBegin instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Fix the link target after the conversion of the XML description to RST
which renamed anchors and drop the <a> tag from the C code comment.
Apart from not working properly in the .c file it didn't work in the
generated docs either as the brackets were escaped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
We converted exclusively to https links so the generator should wrap
those in appropriate link tags too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The sheepdog project is unmaintained, with last commit in 2018 and
numerous unanswered issues reported.
Remove the libvirt storage driver support for it to follow the removal
of the client support in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The support for the sheepdog storage backend will be dropped in the
upcoming patches. Remove all the relevant tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upstream will be dropping the sheepdog storage backend, so we need to
stop building the package and obsolete it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using the modern emulator and arch will allow us to convert all of the
tests to use DO_TEST_CAPS_LATEST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The support for 'sheepdog' was dropped from qemu-6.1 and later, to
convert the tests to latest caps we need to use something else. Use
'nbd'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Openstack developers reported that newly-created mdevs were not
recognized by libvirt until after a libvirt daemon restart. The source
of the problem appears to be that when libvirt gets the udev 'add'
event, the sysfs tree for that device might not be ready and so libvirt
waits 100ms for it to appear (max 100 waits of 1ms each). But in the
OpenStack environment, the sysfs tree for new mediated devices was
taking closer to 250ms to appear and therefore libvirt gave up waiting
and didn't add these new devices to its list of nodedevs.
By changing the wait time to 1 second (max 100 waits of 10ms each), this
should provide enough time to enable these deployments to recognize
newly-created mediated devices, but it shouldn't increase the delay for
more traditional deployments too much.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2109450
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When commit bac6b266fb added this "functionality" this was the only
naming I could think of, but after discussion with Dan we found the name
'null' fits a bit better, so change it before we make a release with the
old name.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The most recent environment e.g. present in our Fedora Rawhide builds
fail to build the tree with clang with the following error:
../src/util/virhostcpu.c:1291:25: error: field 'header' with variable sized type 'struct kvm_msrs' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
struct kvm_msrs header;
^
The problem seems to be that clang doesn't like the new way the
'entries' field in struct kvm_msrs is declared.
To work around the issue we can simply allocate the variable dynamically
and use the 'entries' member as it was intended to to access the
members.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Instead of separately building the commandline into a string to log,
just wait a few lines until we've built the virCommand object, and
call virCommandToString, which does the same thing.
(As a bonus, we were already calling virCommandToString to put the
commandline in a string in case of a failure when running it - from
the point of view of *that* usage, we're just moving the call to
virCommandToString *up* a few lines, i.e. we now only construct the
commandline string once.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Although the next commit will eliminate the one current use of
virFirewallRuleToString(), a future commit will once again have a use
for it, but in a different source file so it will need to be a global
function rather than static. Make that change now so that we don't get
a compile error from having an unused static function in the next
commit.
(The arg list is also changed to include the name of the command as a
separate argument rather than just assuming that it can be derived
from the rule's layer (which is correct for iptables, but won't be
correct for nftables)).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This was a wrapper to call a function in virfirewalld.c that sends an
iptables passthrough rule to firewalld. It hasn't been used in a year
or two, and won't ever be used in the future since passthrough rules
are only supported for iptables, and we've determined that we
shouldn't use iptables passthrough rules.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similar to the other drivers, virNetworkDriverState now has a
virObject-derived object called virNetworkDriverConfig which is used
for config items.
As a starting point, the directory paths used by the network driver
are moved there (again, parallelling what is done for other drivers).
Using items in virNetworkDriverConfig is (yes, again) similar to using
items in the other drivers' config - anything in the config object is
immutable (once initialized), so the state object only needs to be
locked while getting a reference to the config object, and then the
members of the config object can be safely used until the config
object is unrefed.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is more similar to lxc and qemu drivers, where the driver state
struct is defined along with a config struct in ${driver}_conf.h
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After converting virNetworkDef * to g_autoptr(virNetworkDef) the
cleanup codepath was empty, so it has been removed.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After converting virNetworkDef * to g_autoptr(virNetworkDef) the
cleanup codepath was empty, so it has been removed.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After converting virNetworkDef * to g_autoptr(virNetworkDef) the
cleanup codepath was empty, so it has been removed.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virCommand module is specifically designed so that no caller
has to check for retval of individual virCommand*() APIs except
for virCommandRun() where the actual error is reported. Moreover,
virCommandNew*() use g_new0() to allocate memory and thus it's
not really possible for those APIs to return NULL. Which is why
they are even marked as ATTRIBUTE_NONNULL. But there are few
places where we do check the retval which is a dead code
effectively. Drop those checks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
When multiple VFIO or VDPA devices are assigned to a guest, the guest
can fail to start because the guest fails to map enough memory. For
example, the case mentioned in
https://bugzilla.redhat.com/show_bug.cgi?id=2111317 results in this
failure:
2021-08-05T09:51:47.692578Z qemu-kvm: failed to write, fd=31, errno=14 (Bad address)
2021-08-05T09:51:47.692590Z qemu-kvm: vhost vdpa map fail!
2021-08-05T09:51:47.692594Z qemu-kvm: vhost-vdpa: DMA mapping failed, unable to continue
The current memlock limit calculation does not work for scenarios where
there are multiple such devices assigned to a guest. The root causes are
a little bit different between VFIO and VDPA devices.
For VFIO devices, the issue only occurs when a vIOMMU is present. In
this scenario, each vfio device is assigned a separate AddressSpace
fully mapping guest RAM. When there is no vIOMMU, the devices are all
within the same AddressSpace so no additional memory limit is needed.
For VDPA devices, each device requires the full memory to be mapped
regardless of whether there is a vIOMMU or not.
In order to enable these scenarios, we need to multiply memlock limit
by the number of VDPA devices plus the number of VFIO devices for guests
with a vIOMMU. This has the potential for pushing the memlock limit
above the host physical memory and negating any protection that these
locked memory limits are providing, but there is no other short-term
solution.
In the future, there should be have a revised userspace iommu interface
(iommufd) that the VFIO and VDPA backends can make use of. This will be
able to share locked memory limits between both vfio and vdpa use cases
and address spaces and then we can disable these short term hacks. But
this is still in development upstream.
Resolves: https://bugzilla.redhat.com/2111317
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Xen toolstack has gained basic Virtio support recently which becides
adding various virtio related stuff introduces new disk backend type
LIBXL_DISK_BACKEND_STANDALONE [1].
Unfortunately, this caused a regression in libvirt build with Xen support
enabled, reported by the osstest today [2]:
CC libxl/libvirt_driver_libxl_impl_la-xen_xl.lo
../../src/libxl/xen_xl.c: In function 'xenParseXLDisk':
../../src/libxl/xen_xl.c:779:17: error: enumeration value 'LIBXL_DISK_BACKEND_STANDALONE'
not handled in switch [-Werror=switch-enum]
switch (libxldisk->backend) {
^~~~~~
cc1: all warnings being treated as errors
The interesting fact is that switch already has a default branch (which ought
to cover such new addition), but the error is triggered as -Wswitch-enum
gives a warning about an omitted enumeration code even if there is a default
label.
Also there is a similar issue in libxlUpdateDiskDef() which I have reproduced
after fixing the first one, but it that case the corresponding switch doesn't
have a default branch.
Fix both issues by inserting required enumeration item to make the compiler
happy and adding ifdef guard to be able to build against old Xen libraries
as well (without LIBXL_HAVE_DEVICE_DISK_SPECIFICATION). Also add a default
branch to switch in libxlUpdateDiskDef().
Please note, that current patch doesn't implement the proper handling of
LIBXL_DISK_BACKEND_STANDALONE and friends, it is just intended to fix
the regression immediately to unblock the osstest. Also it worth mentioning
that current patch won't solve the possible additions in the future.
[1] https://lore.kernel.org/xen-devel/20220716163745.28712-1-olekstysh@gmail.com/
[2] https://lore.kernel.org/xen-devel/E1oHEQO-0008GA-Uo@osstest.test-lab.xenproject.org/
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we no longer care about any of their properties, there's no need
to call `device-list-properties` on these devices.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced back in 2013 by QEMU commit:
commit 398489018183d613306ab022653552247d93919f
pc: limit 64 bit hole to 2G by default
Released in 1.6.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced back in 2012 by QEMU commit:
commit 783e9b4826b95e53e33c42db6b4bd7d89bdff147
introduce a new monitor command 'dump-guest-memory' to dump guest's memory
Released in QEMU 1.2.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is needed to ensure the environment variables that we need
for the test program itself, specifically to load mock libraries,
do not interfere with any command that gets invoked by it, either
directly or indirectly. We already perform the same cleanup step
for LD_* variables.
This makes the test failures
error : virCommandWait:2752 : internal error: Child process
(/usr/libexec/qemu/vhost-user/test-vhost-user-gpu --print-capabilities)
unexpected fatal signal 6: dyld[8896]: symbol not found in flat
namespace '_virQEMUCapsGet'
error : qemuVhostUserFillDomainGPU:394 : operation failed: Unable to
find a satisfying vhost-user-gpu
that were showing up on macOS 12 go away.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The DYLD_* environment variables on macOS have the same purpose
as the LD_* variables have on Linux. Since we're preserving the
latter by default, it makes sense to do the same for the former
as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, the tpm->data.emulator.activePcrBanks member was an
unsigned int but since it was used as a bitmap it was converted
to virBitmap type instead. Now, the virBitmap is allocated inside
of virDomainTPMDefParseXML() but only if <activePcrBanks/> was
found with at last one child element. Otherwise it stays NULL.
Fast forward to starting a domain with TPM 2.0 and no
<activePcrBanks/> configured. Eventually,
qemuTPMEmulatorBuildCommand() is called, which subsequently calls
qemuTPMEmulatorReconfigure() and finally
qemuTPMPcrBankBitmapToStr() passing the NULL value. Before
rewrite to virBitmap this function would return NULL for empty
activePcrBanks but now, well, now it crashes.
Fixes: 52c7c31c80
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch uses qemuMonitorQueryStats to query "halt_poll_success_ns"
and "halt_poll_fail_ns" for every vCPU. The respective values for each
vCPU are then added together.
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Related: https://gitlab.com/libvirt/libvirt/-/issues/276
This patch adds an API for the "query-stats" QMP command.
The query returns a JSON containing the statistics based on the target,
which can either be vCPU or VM, and the providers. The API deserializes
the query result into an array of GHashMaps, which can later be used to
extract all the query statistics. GHashMaps are used to avoid traversing
the entire array to find the statistics you are looking for. This would
be a singleton array if the target is a VM since the returned JSON is
also a singleton array in that case.
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Since we cannot properly plug a new VM into the distributed switch, we can at
least report the provided pieces of information, so that XML editing still works
even for VMs with such interfaces.
https://bugzilla.redhat.com/show_bug.cgi?id=1988211
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Reviewed-by: Ján Tomko <jtomko@redhat.com>
This represents an interface connected to a VMWare Distributed Switch,
previously obscured as a dummy interface.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 70768cda97 marked this particular config string optional, but
forgot that two of the interface types still require this name to
exist. Mark it as optional only if there is no connectionType.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Reviewed-by: Ján Tomko <jtomko@redhat.com>
This makes it nicer to use as since it cannot fail shortens the usage in all
callers.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 70768cda97 added a functionality that was previously (in an unsubmitted
version of the commit) represented differently in the XML, but the filenames
kept the old name. Fix the name so they are not misleading.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Reviewed-by: Ján Tomko <jtomko@redhat.com>
The output of "virsh capabilities" was not conformant to the
capability.rng schema. Add the missing element to the schema.
Fixes: c647bf29af
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The change to caps-test.xml demonstrates the need for the change to
cputypes.rng.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The hostcpu rng has an optional "model" element, with the remaining
elements each within a nested optional. Remove the optional nesting
and have each element explicitly listed as optional
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduced back in 2010 by QEMU commit:
commit a697a334b3c4d3250e6420f5d38550ea10eb5319
virtio-net: Introduce a new bottom half packet TX
Released in QEMU 0.14.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
There is no need to specify an interface for a disk test.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Set it same way we set throttling for other disks in
qemuProcessSetupDiskThrottling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While we assume that -blockdev is supported the validator had also some
corner cases for -drive. Since we use '-drive' exclusively for the
extremely rarely used SD cards it makes no sense to have the validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability is checked when we validate the source in the first
place. Also it won't make sense any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we know we have a modern qemu at hand which can interpret the
dotted syntax, we can format the -drive needed for SD cards via the
common infrastructure we have for all blockdev stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the generic frontend-less -drive code from qemuBuildDriveStr by
assuming that we support only blockdev-enabled qemus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
SD card disks can't be detached, so it makes no sense to special case
them in the unplug code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Enable blockdev mode and convert the expected commands to the modern
equivalents in preparation for removing the old-style hotplug code
paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All media are changed in blockdev-instantiated cdroms now, remove the
old code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With new qemu versions we setup floppies via -device.
Some legacy output tests were not modernized yet so the expected output
needs to be adjusted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'persistjob' is always true and 'top' and 'base' are always NULL.
Adjust the functions to drop the arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The top level API is unused so it can be removed but internally the JSON
version is called by other monitor commands which extract information
from the reply.
Thus qemuMonitorJSONQueryNamedBlockNodes is unexported and moved
appropriately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function and its callees were a bit more entangled so remove the
pre-blockdev code separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only instance in this file can be simplified to avoid checking the
capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With blockdev we are generating the nodenames ourselves so all of this
infrastructure became obsolete. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previous patches removed the job submission for the handler so now even
the handler itself can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume that QEMU_CAPS_BLOCKDEV is present and remove all code executed
when it's not.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The migration code was using few blockdev bits before blockdev was
fully integrated to allow TLS with NBD.
Since we now always use blockdev we can remove the check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We no longer need the arguments which were conditionally filled based on
presence of the QEMU_CAPS_BLOCKDEV feature.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume that QEMU_CAPS_BLOCKDEV is present and remove all code executed
when it's not.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In one of early iterations of the gluster driver 'tcp' was used instead
of 'inet' and 'socket' instead of 'path' for unix sockets. All of this
can be now removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that QEMU_CAPS_BLOCKDEV_HOSTDEV_SCSI is always set we can remove the
code which handled cases when the capability was not set.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device_id' property of 'scsi_disk' was added in qemu-4.0 and it's
unconditionally present, thus we can now always assume its presence.
Update some fake-caps test which didn't yet assert the capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code which fills 'qomName' does so only when the blockdev capability
is enabled so we don't have to check it separately as it can be only
non-NULL when blockdev is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Until we finish removing the capabilities we need to force them in the
tests so that it's obvious that the code changes have no impact.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The cleanup of the code to always assume support for QEMU_CAPS_BLOCKDEV
will not be simple, so for now we hardcode the support and the code will
be cleaned up gradually.
We also disallow users to clear the flags via the namespace property or
qemu.conf configuration.
The change to the PPC64 test data originates from the fact that the
capability dump is not from the release version but is lacking one of
the necessary flags to enable -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modernize 'disk-nvme', 'encrypted-disk-usage', 'encrypted-disk', and
'user-aliases' cases to use DO_TEST_CAPS_LATEST.
This will remove all uses of QEMU_CAPS_QCOW2_LUKS from the test suite.
Since the output files are done via symlinks to input files, the input
files need to be modernized with few auto-added XML bits.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modernize the tests as they mostly care that the aliases are properly
propagated to qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Discard and zero-detection for disk sources is supported since qemu-2.1
so we can always assume it's supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The debug level of gluster backend became configurable in qemu-2.8.
This also removes the only old-style syntax for the 'blockdev-add'
command prior to stabilization.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'debug' level for the gluster driver was added in qemu-2.8
unconditionally so libvirt can always assume it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'change-backing-file' command is unconditionally supported since
qemu-2.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'change-backing-file' command was added in qemu-2.1 and doesn't have
any dependencies. We use it as witness for using blockjobs with relative
backing paths. Always assume it's supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code no longer uses the capability so the tests don't need to assert
it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now only support qemu versions which already have the capability so
we can remove this now unused code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename qemuBuildAudioCommandLineArgs to qemuBuildAudioCommandLine and
fix the arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Generate only new version of the '-audiodev' commandline. The leftover
old code and validation will be removed in subsequent patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Per [1] the Debian 10 reaches EOL in August of 2022. This allows us to
bump the minimum supported qemu version to qemu-4.2 which will also
allow us to do significant cleanups.
This commit bumps the minimum qemu verison and updates the corresponding
docs.
[1]: https://wiki.debian.org/DebianReleases
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Minimum qemu version is going to be bumped to qemu-4.2. Upgrading the
version of these tests doesn't make sense as the host cpu in the real
capabilities doesn't support the features the tests are attempting to
test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting from qemu-4.0 a new device model name is used instead of the
'disable_*' props. Since we are going to bump to qemu-4.2 as minimum
this test can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Minimum qemu version will be bumped to qemu-4.2 so we no longer need to
care about configuring audiodevs via the environment variables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will bump minimum supported qemu version to 4.2 which
will use '-blockdev' with qemu so we can drop all the old test cases for
pre-blockdev configs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will bump minimum qemu version to 4.2. In this case we
the 'latest' case is sufficient as with qemu-4.2 we already behave as
upstream ('qemu64' cpu is used instead of 'qemu32').
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Debian 10 will reach EOL in august of 2022 and thus libvirt will no
longer target it. Move CI jobs over to Debian-11.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller doesn't check the return value and actually doesn't have
one either. Remove the return value and adjust return statements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we started handling the monitor EOF event inside a job any code
which uses virDomainObjWait would no longer properly abort in case when
the VM crashed during the wait.
This is because virDomainObjWait uses virDomainObjIsActive which checks
'vm->def->id' to see if the VM is still active. Unfortunately the domain
id is cleared in qemuProcessStop which is run only inside the job.
To fix this we can use the 'beingDestroyed' flag stored in the VM
private data which is set to true around the time when the condition is
signalled.
Reported-by: Pavel Hrdina <phrdina@redhat.com>
Fixes: 8c9ff9960b
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Right now we're setting the prefix to a custom path, which
results in paths like
/builds/libvirt/libvirt/vroot/etc/libvirt/virtqemud.conf
ending up in the generated HTML. In order to avoid that,
set the prefix and other installation paths to reasonable
default values by passing
-Dsystem=true
and then take advantage of $DESTDIR support to still be able
to write the HTML files without requiring root privileges.
Reported-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
meson already supports $DESTDIR natively, but in this case
we're using a custom script and so we have to do some extra
work ourselves.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The qemu code will need to check other qemu-private conditions when
reporting success for waiting. Thus we must replace all use of it with a
qemu-specific helper. For now the helper forwards directly to
virDomainObjWait.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It would be nice to be able to test the mediated device capabilities
without having physical hardware which supports it. The 'mtty' kernel
module presents a virtual parent device which is capable of creating
'fake' mediated devices, and as such it would be useful for testing.
However, the 'mtty' device is not part of an existing device subsystem
(e.g. PCI, etc), so libvirt ignores it and it does not get added to the
node device list. And because it does not get added to the node device
list, it cannot be used to create child mdevs using `virsh
nodedev-create`.
There is already a node device type capability
VIR_NODE_DEV_CAP_MDEV_TYPES that indicates whether a device supports
creating child mediated devices, but libvirt assumes that this is a
nested capability (in other words, it assumes that the primary
capability of a device is something like PCI). If we allow this
MDEV_TYPES capability to be a primary device capability, then we can
support virtual devices like 'mtty' as a parent for mediated devices.
See https://bugzilla.redhat.com/show_bug.cgi?id=2107031
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Successfully returning without doing anything is what the
function already does on non-Apple platforms.
When building on macOS, however, the check for HVF availability
will be performed. When running on bare metal, that will result
in the QEMU_CAPS_HVF flag being added to the virQEMUCaps
instance, and a bunch of error messages along the lines of
In 'tests/qemucapabilitiesdata/caps_6.2.0.x86_64.xml':
Offset 7557
Expect [c]
Actual [hvf'/>
<flag name=‘c]
showing up.
Up until now we hadn't noticed because our CI jobs run in VMs,
where HVF support is not available.
Reported-by: Christophe de Dinechin <dinechin@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Tested-by: Christophe de Dinechin <dinechin@redhat.com>
We need this callback structure for qemu driver only, but it
makes more sense to include it in the virDomainJobObj in case of
other future additions than as a parameter of a beginJob
functions.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch adds a new variable maxQueuedJobs into the job object
as it is the last hypervisor-based part of the begin job. Since
this patch, it will not be necessary to propagate driver
structure into the job functions.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
It makes sense to move this to other hypervisor-based functions
into the private job callback structure to make begin job
general.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The virMacMap module is used only for libvirt_guests NSS module
as it records list of MAC addresses used by certain guest. But
the module itself is usable if and only if the network assigns IP
addresses (i.e. has dnsmasq running). If it's some other
authority that assigns IP addresses then we do not need the
virMacMap module at all.
For instance, a network with no <forward/> type and no DHCP set
won't create /var/lib/libvirt/dnsmasq/ dir which is what the
module expects to exist. But there's no need for the module to
even care about such network.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/348
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, whenever virNetworkObjSetMacMap() is called the same
pattern is used:
1) call virMacMapFileName() to generate a filename,
2) pass this filename to virMacMapNew(), and finally
3) pass retval from previous step to virNetworkObjSetMacMap().
Move this code into a helper (networkSetMacMap()) and replace
both pattern occurrences with its call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virNetworkObjSetMacMap() API effectively steals passed
@macmap argument. However, the argument is a plain, first order
pointer. This requires every caller to set the argument to NULL
after the function was called. Let's make the function take
double pointer instead to make it obvious that the argument is
consumed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's annotate virMacMap variables in bridge_driver.c with
g_autoptr() so that they are automatically freed upon error. This
may look like a needless commit, since there's no memory leak
currently, but it simplifies the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The networkStartNetworkVirtual() function handles starting of
networks of different forward types (none, nat, route, open).
And as a part of startup process dnsmasq might be spawned but
doesn't have to be (depending on the network configuration). The
@dnsmasqStarted variable is supposed to track whether dnsmasq was
started or not (so that it can be killed when starting network
fails after it was started). But the variable is set even when
the code decided not to start it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
One specfile containing both native and mingw builds is the
new best practice for Fedora. This reduces the maint burden
and ensures the mingw packages don't fall behind.
Note this adds many more BuildRequires for anyone building
on Fedora, which will now need installing.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This fixes vircryptotest on macOS 12 (Monterey).
The test relies on library injection (using DYLD_INSERT_LIBRARIES)
to replace the normal random functions with functions giving predictable
results, defined in virrandommock.c. However, using DYLD_INSERT_LIBRARIES
only works when building with flat namespaces.
Adding the -Wl,-flat_namespace option to the linker fixes the problem.
The option was already defined in the top-level meson.build, but had been
forgotten in the test linker arguments.
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Instead of duplicating the list of attributes that are not
allowed for some of the IOMMU models, use two separate switch
statements: one for the attributes and one for the address.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The query-cpus-fast command was introduced in 2.12, therefore
query-cpus is never used on supported versions of QEMU. Remove
the logic to parse its output, as well as the parameters to
choose between the two commands.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All tests now use query-cpus-fast. Since the QEMU driver will lose
support for query-cpus soon, go ahead and remove support for testing
it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All supported versions of QEMU include the query-cpus-fast QMP command.
In preparation for dropping support for the old "query-cpus" commands,
convert the JSON output for x86 tests to the new format, and drop the
"halted" field from the expected output as it is not available anymore.
The CPU properties were obtained from the query-hotpluggable-cpus output
in tests/qemumonitorjsondata. CPU, thread_id, and qom_path are renamed
respectively to cpu-index, qom-path and thread-id, while nip and halted
are removed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All supported versions of QEMU include the query-cpus-fast QMP command.
In preparation for dropping support for the old "query-cpus" commands,
convert the JSON output for PPC tests to the new format, and drop the
"halted" field from the expected output as it is not available anymore.
The CPU properties were obtained from the query-hotpluggable-cpus output
in tests/qemumonitorjsondata. CPU, thread_id, and qom_path are renamed
respectively to cpu-index, qom-path and thread-id, while nip and halted
are removed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All supported versions of QEMU include the query-cpus-fast QMP command.
In preparation for dropping support for the old "query-cpus" commands,
remove the "-fast" suffix from both x86-full-fast and s390-fast.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All supported versions of QEMU include the query-cpus-fast QMP command.
In preparation for dropping support for the old "query-cpus" commands,
remove the query-cpus version of the x86-full test.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently, it's possible to pass various attributes to an IOMMU's
<driver/> element hoping that we enable them in underlying
hypervisor. However, depending on the IOMMU model, some of these
attributes can't be enabled and are simply ignored. This is
suboptimal and we should reject such configuration in the
validate phase.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2101633
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch moves qemuDomainTrackJob() as virDomainTrackJob() into
hypervisor because it is called in begin job and end job
functions that will be generalized in the following series.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainObjClearJob() as
virDomainObjClearJob() into hypervisor in order to be used by
other hypervisors as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainObjPreserveJob() as
virDomainObjPreserveJob() into hypervisor in order to be used by
other hypervisors as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It does not make sense to propagate virDomainObj and get
qemuDomainObjPrivate from it, when it is already accessible in
the only function qemuDomainObjPreserveJob() is called from. That
being said, we can also propagate virDomainJobObj directly and
avoid using qemu private structure.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainObjResetAsyncJob() as
virDomainObjResetAsyncJob() into hypervisor.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainObjResetAgentJob() as
virDomainObjResetAgentJob() into hypervisor.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After QEMU is killed in qemuProcessStop() its mount namespace
doesn't exist anymore, because it was the only process running
there. Thus we should clear our internal flag that the domain has
namespace enabled so that seclabel restore code does not try to
enter it. We do the same in qemuProcessHandleMonitorEOF() but
when it is us, who decides to kill QEMU rather than QEMU quitting
we haven't seen EOF by the time qemuProcessStop() is called.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In most cases, disabling the secure-boot or the enrolled-keys
firmware feature will achieve the same result: allowing an
unsigned operating system to run.
Right now we're only documenting the latter configuration. Add
the former as well, and explain the difference between the two.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It should be enough to enable or disable the enrolled-keys feature
to control whether Secure Boot is enforced, but there's a slight
complication: many distro packages for edk2 include, in addition
to general purpose firmware images, builds that are targeting the
Confidential Computing use case.
For those, the firmware descriptor will not advertise the
enrolled-keys feature, which will technically make them suitable
for satisfying a configuration such as
<os firmware='efi'>
<firmware>
<feature state='off' name='enrolled-keys'/>
</firmware>
</os>
In practice, users will expect the general purpose build to be
used in this case. Explicitly asking for the secure-boot feature
to be enabled achieves that result at the cost of some slight
additional verbosity.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The non-Linux version of virHostCPUGetPhysAddrSize() is lacking
G_GNUC_UNUSED attribute to its @size argument which triggers an
error on all non-Linux builds. And while at it, make the function
actually signal error (ENOSYS) since it does not set the
argument.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch maps /domain/cpu/maxphysaddr into -cpu parameters:
- <maxphysaddr mode='passthrough'/> becomes host-phys-bits=on
- <maxphysaddr mode='emualte' bits='42'/> becomes phys-bits=42
Passthrough mode can only be used if the chosen CPU model is
'host-passthrough'. Also validate that an explicitly specified
bits value does not exceed the physical address bits on the host.
The feature is available since QEMU 2.7.0.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch introduces the
<maxphysaddr mode='passthrough'/>
<maxphysaddr mode='emulate' bits='42'/>
sub element of /domain/cpu, which allows specifying the guest virtual CPU
address size. This can be useful if the guest needs to have a large amount
of memory.
If mode='passthrough', the virtual CPU will have the same number of address
bits as the host. If mode='emulate', the mandatory bits attribute specifies
the number of address bits.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have all the machinery needed, we can introduce two
simple test cases:
1) only TPM 1.2 is supported, but TPM 2.0 was requested in domain XML,
2) only TPM 2.0 is supported, but TPM 1.2 was requested in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Supported TPM versions are reported in domain capabilities. These
are used already to validate TPM type and model, but not TPM
version. This is suboptimal, because otherwise we leave users to
meet the error when starting a guest and libvirt spawns swtpm
binary which in turn reports an error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Because of v8.5.0-rc1~25 we are already faking TPM support for
domaincaps. Might as well fake supported TPM versions.
The swtpm binary supports both TPM versions since its first
release, but pretend it isn't the case. For QEMU-5.2 and older
pretend only TPM-1.2 is available, QEMU-6.* has both TPM-1.2 and
TPM-2.0 and QEMU-7.0 and newer has only TPM-2.0 available.
This way, domaincaps are more dispersed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The virDomainTPMVersion enum is declared in domain_conf.h among
with its TypeFromString() and TypeToString() helpers (which are
then implemented in domain_conf.c). However, neither of these
helpers is exposed in libvirt_private.syms which makes it
impossible for other modules to use.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
When we call qemuDomainSetMaxMemLock to reset memory locking limit back
to its original value the domain can already be stopped (for example
after the domain shuts down during migration) in which case it does not
make sense to set any limit. Doing so can even be harmful as we may end
up setting the limit for the daemon itself as the PID is 0.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When resetting private data after stopping QEMU process we should also
reset the original memory locking limit (both normal and pre-migration)
as they are not relevant anymore.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The qemuDomainDefCPUPostParse() does a bit more than filling in
missing info. It also validates CPU cache configuration. Move
that code into qemuValidateDomainDefCpu() where the code fits
better.
And since I need to fix indentation of existing code in
qemuValidateDomainDefCpu(), I'm taking this opportunity and move
error messages onto single line. Interestingly, this uncovers a
bug we have in sc_prohibit_diagnostic_without_format syntax-check
rule, because previously a virReportError() with a message
spawned over three lines was not caught but not it is. But
trying to understand that regex is a job for another time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Directly check the return value of 'connect'. Unfortunately we can't
remove it as we have to undo auto-closing of the socket on success.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
All callers now pass false for 'retry' we are guaranteed to have a
monitor socket present. This means that the retry code can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
In 'qemuProcessQMPLaunch' qemu is very specifically launched using it's
internal '-daemonize' flag (see comment in the function) to ensure that
the monitor socket is ready and opened prior to attempting the monitor
connection.
This means we don't have to retry the connection to the monitor in
qemuMonitorOpen as the socket will be already there.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The 'retry' argument makes the monitor connection opening re-try the
connection in case the monitor socket doesn't exist or isn't properly
listening. In case of the test code this can't happen because the socket
is created and made listening in 'qemuMonitorCommonTestNew' which is
called prior to calling 'qemuMonitorOpen'.
We can thus avoit the code which attempts retries in monitor connection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The 'timeout' argument is used by 'qemuMonitorOpenUnix' only when the
'retry' argument is true. The callers of 'qemuMonitorOpen' only pass '0'
for timeout when they call it with 'retry' true and use other values
when 'retry' is false and thus ignored.
This means we can remove the argument and simply have it set to the
default value of QEMU_DEFAULT_MONITOR_WAIT.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Both callers pass 'false' as the argument via a variable which is not
modified. Remove the argument and pass 'false' directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Since functions virQEMUCapsFillDomainFeatureSEVCaps() and
virQEMUCapsSEVInfoCopy() essentially do the same thing it does
not make sense to have the code duplicated. This patch replaces
the relevant code in the first function with the function call to
the second one.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
This patch removes and replaces virCHDomainObjResetJob() with
general virDomainObjResetJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
This patch removes and replaces virLXCDomainObjResetJob() with
general virDomainObjResetJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
This patch removes and replaces libxlDomainObjResetJob() with
general virDomainObjResetJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
This patch moves qemuDomainObjResetJob() as
virDomainObjResetJob() into hypervisor in order to be used by
other hypervisors as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
In a recent commit of v8.5.0-85-g430ab88ab1 I've made domaincaps
XML report supported TPM versions. This was done by calling
virTPMSwtpmSetupCapsGet(). But this function isn't mocked and
thus domaincapstest calls the real implementation, which tries to
execute swtpm_setup binary. This fails, because
virFindFileInPath() is mocked in such way that it returns NULL
for anything else than qemu-*.
Anyway, while the real binary is not executed after all, we
should mock the function which tries to execute it so that
predictable result is returned.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In virtpm.h there are two functions exposed for querying swtpm
and swtpm_setup capabilities: virTPMSwtpmCapsGet() and
virTPMSwtpmSetupCapsGet(), respectively. The capabilities we are
interested in are defined in two separate enums
(virTPMSwtpmFeature and virTPMSwtpmSetupFeature), but these
functions accept capability as an unsigned int rather than their
respective enum. While this makes sense for
virTPMBinaryGetCaps(), which is a module internal helper that
both exposed functions call, there's no need for the functions
themselves to accept unsigned int.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The %posttrans scriptlet checks if libvirtd is active within a
condition that is only executed if libvirtd is active. Remove the
duplicate check.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When no TPM version is provided in the input XML we may default
to version 2.0 (see qemuDomainTPMDefPostParse()). However,
<active_pcr_banks/> are parsed iff a version 2.0 was specified.
This means that this piece of information might be lost.
It's better to parse everything we've been given and then
validate that the configuration is valid.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2084046
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
After previous cleanup, the qemuDomainDefTPMsPostParse() function
does nothing more than validates TPM devices. Therefore, it
should live in qemu_validate.c instead of qemu_domain.c. Move it
there and rename to reflect the fact that the function is doing
validation instead of PostParsing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In the qemuDomainDefPostParse() we aim to fill in top level
values, which require overall view of domain, or those parts of
configuration that are not a device in domain XML (e.g. vCPUs).
However, inside of qemuDomainDefTPMsPostParse(), which is called
from aforementioned function, we do two tings:
1) fill in missing info (TPM version), and
2) validate TPM definition.
Now, if 1) is moved into qemuDomainTPMDefPostParse() (the device
post parse callback), then 2) can be moved into validation step.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When parsing a TPM device plenty of virXMLPropString() +
enum2int() combos are used. These can be replaced with
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The _virDomainTPMDef structure has 'version' member, which is a
bit misplaced. It's only emulator type of TPM that can have a
version, even our documentation says so:
``version``
The ``version`` attribute indicates the version of the TPM. This attribute
only works with the ``emulator`` backend. The following versions are
supported:
Therefore, move the member into that part of union that's
covering emulated TPM devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In previous commit the VIR_DOMAIN_TPM_VERSION_DEFAULT value was
made just an alias to value of 0. And since all newly allocated
memory is zeroed out (due to use of g_new0()), the def->version
inside of virDomainTPMDefParseXML() is also 0 and thus there is
no need to set it explicitly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When "default" version of TPM was provided, our parses accepts it
happily even though the value is forbidden by our RNG and not
documented as accepted value. This is because of < 0 vs <= 0
comparison of virDomainTPMModelTypeFromString() retval.
Make the parser error out explicitly in this case. Users can
always chose to not specify the attribute in which case we pick a
sane default (in qemuDomainDefTPMsPostParse()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When "default" model of a TPM was provided, our parses accepts it
happily even though the value is forbidden by our RNG and not
documented as accepted value. This is because of < 0 vs <= 0
comparison of virDomainTPMModelTypeFromString() retval.
Make the parser error out explicitly in this case. Users can
always chose to not specify the attribute in which case we pick a
sane default (in qemuDomainTPMDefPostParse()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There's no need to skip over ENOENT error in
qemuCgroupAllowDevicesPaths(). The path must exists when
qemuCgroupAllowDevicePath() is called because of virFileExists()
check done right above.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The qemuBuildMachineCommandLine() function is needlessly long.
Separate out parts that generate memory related arguments into
qemuAppendDomainMemoryMachineParams(). Unfortunately, expected
outputs for some qemuxml2argvdata cases needed to be updated
because the order in which arguments are generated is changed.
But there's no functional change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The qemuBuildMachineCommandLine() function is needlessly long.
Separate out parts that generate arguments based on
domainDef->features[] into
qemuAppendDomainFeaturesMachineParam(). Unfortunately, expected
outputs for some qemuxml2argvdata cases needed to be updated
because the order in which features are generated is changed. But
there's no functional change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Almost all of memory models we currently support allow setting
virDomainMemoryDef::targetNode so that the memory module is
associated with given guest NUMA node. And we do have a check
whether the requested node is within bounds, but it's executed
only when building QEMU's cmd line. Move it into validation
phase.
While this commit is moving the validation to a place that does
not validate all the possible code paths, it's okay, because only
the explicit memory device has user-configurable target node
which could break the assumption.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
After previous commit, when memory-hotplug-dimm-addr.xml file was
fixed, we can also introduce the test case to qemuxml2xmltest.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
So far, we are testing memory-hotplug-dimm-addr against a set of
explicitly listed capabilities. While this works, lets switch it
to DO_TEST_CAPS_LATEST() so that the latest capabilities are
used. This in turn means, we have to update the <emulator/>
because the latest capabilities don't contain caps for
qemu-system-i386.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently, virJSONValueObjectHasKey() can return one of three
values:
-1 if passed object type is not VIR_JSON_TYPE_OBJECT,
0 if the key is not present, and finally
1 if the key is present.
But, neither of callers is interested in the -1 case. In fact,
some callers call this function treating -1 and 1 cases the same.
Therefore, make the function return just true/false and fix few
callers that explicitly checked for == 1 case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In my recent comnmit v8.5.0-188-gc47f1abb81 I accidentally moved
qemuMigrationParamsResetTLS after qemuDomainObjEnterMonitorAsync not
noticing qemuMigrationParamsResetTLS will try to enter the monitor
again. The second call will time out and return with a domain object
locked. But we're still in monitor section and the object should be
unlocked which means qemuDomainObjExitMonitor will deadlock trying to
lock it again.
Fixes: c47f1abb81
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This call to qemuMigrationSrcIsAllowedHostdev() (which does a
hardcoded fail of the migration if there is any PCI or mdev hostdev
device in the domain) while doing the destination side of migration
prep was found once the call to that same function was removed from
the source side migration prep (commit 25883cd5).
According to jdenemar, for the V2 migration protocol, prep of the
destination is the first step, so this *was* the proper place to do
the check, but for V3 migration this is in a way redundant (since we
will have already done the check on the source side (updated by
25883cd5 to query QEMU rather than do a hardcoded fail)).
Of course it's possible that the source could support migration of a
particular VFIO device, but the destination doesn't. But the current
check on the destination side is worthless even in that case, since it
is just *always* failing rather than querying QEMU; and QEMU can't be
queried at the point where the destination check is happening, since
it isn't yet running.
Anyway QEMU should complain when it's started if it's going to fail,
so removing this check should just move the failure to happen a bit
later. So the best solution to this problem is to simply remove the
hardcoded check/fail from qemuMigrationDstPrepareFresh() and rely on
QEMU to fail if it needs to.
Fixes: 25883cd5f0
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Commit v8.4.0-287-gd4d3bb8130 tried to make sure the original
pre-migration memory locking limit is restored at the end of migration,
but it missed the case when libvirt daemon is restarted during
migration which needs to be aborted on reconnect.
And if this was not enough, I forgot to actually save the status XML
after setting the field in priv (in the commit mentioned above and also
in v8.4.0-291-gd375993ab3).
https://bugzilla.redhat.com/show_bug.cgi?id=2107424
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function would fail to release the job in case
qemuMigrationSrcIsAllowed failed.
Fixes v8.5.0-157-g69e0e33873
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When the <loader stateless='yes'/> attribute is set, the QEMU driver
needs to do three things
- Avoid looking for an NVRAM template
- Avoid auto-populating an <nvram/> path
- Find firmware descriptors with mode=stateless instead of mode=split
Note, the first thing happens automatically when we solve the second
thing.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Normally when an UEFI firmware is marked as read-only, an associated
NVRAM file will be created. Some builds of UEFI firmware, however, wish
to remain stateless and so will be read-only, but never have any NVRAM
file. To represent this concept a 'stateless' tristate bool attribute
is introduced on the <loader/> element.
There are rather a large number of permutations to consider.
With default firmware selection
* <os/>
=> Historic default, no change
* <os>
<loader stateless='yes'/>
</os>
=> Explicit version of historic default, no change
* <os>
<loader stateless='no'/>
</os>
=> Invalid, bios is always stateless
With manual legacy BIOS selection
* <os>
<loader>/path/to/seabios</loader>
...
</os>
=> Historic default, no change
* <os>
<loader stateless='yes'>/path/to/seabios</loader>
...
</os>
=> Explicit version of historic default, no change
* <os>
<loader stateless='no'>/path/to/seabios</loader>
...
</os>
=> Invalid, bios is always stateless
With manual UEFI selection
* <os>
<loader type='pflash'>/path/to/edk2</loader>
...
</os>
=> Historic default, no change
* <os>
<loader type='pflash' stateless='yes'>/path/to/edk2</loader>
...
</os>
=> Skip auto-filling NVRAM / template
* <os>
<loader type='pflash' stateless='no'>/path/to/edk2</loader>
...
</os>
=> Explicit version of historic default, no change
With automatic firmware selection
* <os firmware='bios'/>
=> Historic default, no change
* <os firmware='bios'>
<loader stateless='yes'/>
</os>
=> Explicit version of historic default, no change
* <os firmware='bios'>
<loader stateless='no'/>
</os>
=> Invalid, bios is always stateless
* <os firmware='uefi'/>
=> Historic default, no change
* <os firmware='uefi'>
<loader stateless='yes'/>
</os>
=> Skip auto-filling NVRAM / template
* <os firmware='uefi'>
<loader stateless='no'/>
</os>
=> Explicit version of historic default, no change
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Outline how upstream issues are triaged and explain what the states of
the issue means.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add a note outling best practices around review and responding to it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Because qemuMigrationParamsReset used to call qemuMigrationParamsApply
for resetting migration capabilities and parameters, it did not work
well since commit v5.1.0-83-ga1dec315c9 which only allowed capabilities
to be set from an async job. However, when reconnecting to running
domains after daemon restart we do not have an async job. Thus the
capabilities were not properly reset in case the daemon was restarted
during an ongoing migration. We need to avoid calling
qemuMigrationParamsApply to make sure both parameters and capabilities
can be reset by a normal job.
https://bugzilla.redhat.com/show_bug.cgi?id=2107892
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuMigrationParamsApply restricts when capabilities can be set, but
this is not useful in all cases. Let's create new helpers for setting
migration capabilities and parameters which can be reused in more places
without the restriction.
https://bugzilla.redhat.com/show_bug.cgi?id=2107892
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We keep original values of migration parameters so that we can restore
them at the end of migration to make sure later migration does not use
some random values. However, this does not really work when libvirt
daemon is restarted on the source host because we failed to explicitly
save the status XML after getting the migration parameters from QEMU.
Actually it might work if the status XML is written later for some other
reason such as domain state change, but that's not how it should work.
https://bugzilla.redhat.com/show_bug.cgi?id=2107892
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While we all understand that excessive use of ternary operator
may worsen code readability (e.g. nested, multi-line expression),
there are few cases where using it actually improves code
readability. For instance, when a function takes a long list of
arguments out of which one depends on a boolean expression, or
when formatting "yes"/"no" or "on"/"off" values based on a
boolean variable (although one can argue that the latter is a
subset of the former). Just consider alternatives to:
virBufferAsprintf(buf, "<elem>%s</elem>\n", boolVar ? "yes" : "no");
In fact, this pattern occurs plenty in our code. Exempt it from
our "no ternary operators" rule.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The VIR_ENUM_IMPL macros directly above them list one string per line.
Use the same also for qemuMonitorMigrationStatus and
qemuMonitorVMStatus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's no longer possible for libvirt to connect over the ssh transport
from RHEL 9 to RHEL 5. This is because SHA1 signatures have been
effectively banned in RHEL 9 at the openssl level. They are required
to check the RHEL 5 host key. Note this is a separate issue from
openssh requiring additional configuration in order to connect to
older servers.
Connecting from a RHEL 9 client to RHEL 5 server:
$ cat ~/.ssh/config
Host 192.168.0.91
KexAlgorithms +diffie-hellman-group14-sha1
MACs +hmac-sha1
HostKeyAlgorithms +ssh-rsa
PubkeyAcceptedKeyTypes +ssh-rsa
PubkeyAcceptedAlgorithms +ssh-rsa
$ virsh -c 'qemu+ssh://root@192.168.0.91/system' list
error: failed to connect to the hypervisor
error: Cannot recv data: ssh_dispatch_run_fatal: Connection to 192.168.0.91 port 22: error in libcrypto: Connection reset by peer
"error in libcrypto: Connection reset by peer" is the characteristic
error of openssl having been modified to disable SHA1 by default.
(You will not see this on non-RHEL-derived distros.)
You could enable the legacy crypto policy which downgrades security on
the entire host, but a more fine-grained way to do this is to create
an alternate openssl configuration file that enables the "forbidden"
signatures. However this requires passing the OPENSSL_CONF
environment variable through to ssh to specify the alternate
configuration. Libvirt filters out this environment variable, but
this commit allows it through. With this commit:
$ cat /var/tmp/openssl.cnf
.include /etc/ssl/openssl.cnf
[openssl_init]
alg_section = evp_properties
[evp_properties]
rh-allow-sha1-signatures = yes
$ OPENSSL_CONF=/var/tmp/openssl.cnf ./run virsh -c 'qemu+ssh://root@192.168.0.91/system' list
root@192.168.0.91's password:
Id Name State
--------------------
Essentially my argument here is that OPENSSL_CONF is sufficiently
similar in nature to KRB5CCNAME, SSH* and XAUTHORITY that we should
permit it to be passed through.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2062360
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'cmdQemuMonitorCommandQMPWrap' is checking whether the user provided
string is not valid JSON to avoid wrapping it. In cases where it's not
JSON we ignore the error and add the wrapper.
If the caller then reports a different non-libvirt error the error from
the JSON parsing would be printed as well. Reset errors we ignore:
# virsh qemu-monitor-command cd --pass-fds a asdf
error: Unable to parse FD number 'a'
error: internal error: cannot parse json asdf: lexical error: invalid char in json text.
asdf
(right here) ------^
In the above case 'asdf' is not valid JSON, but the code did wrap it
into '{"execute":"asdf"}', the only problem is the argument for
--pass-fds.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Historically, the dumpxml command reject any unknown arguments,
for instance:
virsh dumpxml fedora xxx
However, after v8.5.0-rc1~31 the second argument ('xxx') is
treated as an XPath, but it's not that clearly visible.
Therefore, require the --xpath switch, like this:
virsh dumpxml fedora --xpath xxx
Yes, this breaks already released virsh, but I think we can argue
that the pool of users of this particular function is very small.
We also document the argument being mandatory:
dumpxml [--inactive] [--security-info] [--update-cpu] [--migratable]
[--xpath EXPRESSION] [--wrap] domain
The sooner we do this change, the better.
The same applies for other *dumpxml functions (net-dumpxml,
pool-dumpxml, vol-dumpxl to name a few).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2103524
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Note that we can only do this for intel-iommu and virtio-iommu,
which are configured using -device; smmuv3 is configured using
a machine type property, so there's no room on the command line
for an alias in that case.
https://bugzilla.redhat.com/show_bug.cgi?id=2108483
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When hotplugging a chardev, Libvirt opens corresponding
file/binds to a socket/does whatever necessary to obtain an FD
that is later passed to QEMU. However, due to wrong placement of
the function that does all of this
(qemuProcessPrepareHostBackendChardevHotplug()) it may happen
that a file is set seclabel on, only to be unlink()-ed and
created again (the former is done by
qemuSecuritySetChardevLabel(), the latter by aforementioned
function). The unlink()-ing is done for UNIX sockets with
mode='bind' and happens inside qemuOpenChrChardevUNIXSocket().
However, these steps can be swapped simply.
Fixes: ad81aa8ad0
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
When hotplugging a chardev, Libvirt opens corresponding
file/binds to a socket/does whatever necessary to obtain an FD
that is later passed to QEMU. However, if something fails after
the FDs were transferred to QEMU and before chardev is actually
added via monitor, these FDs are never closed in QEMU. This is
rather suboptimal.
Fixes: 15bdced9b3
Fixes: ad81aa8ad0
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Pattern of using switch instead of a long if else construction is
used everywhere, so I used it here as well to make the code more
consistent (and remove that else after return). I also included
all the values from the enum.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The else branches are redundant because the execution will never
reach them if the conditions in the previous 'if' branches are
true.
I think this looks cleaner and is more readable, because having
'else' branch indicates that no return / break / goto is in the
previous branch and the function can reach it.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This patch rewrites conditions to make the code easier to read and less
nested.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Commit 6262752460 added the acquiring of a job, but it is not always
VIR_ASYNC_JOB_MIGRATION_OUT, so the code fails when doing save or anything else.
Correct the async job by passing it from the caller as another parameter.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add a new flag VIR_LXC_PROCESS_CLEANUP_AUTODESTROY to
virLXCProcessCleanupFlags for skipping removal of the autodestroy
callback so that fake reboot of the container doesn't need to fetch the
connection and re-register it.
Since virLXCProcessReboot is defined before virLXCProcessCleanupFlags,
this patch also moves the flag enum typedef to the beginning of the
file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Use automatic unlocking of the 'vm' object, so that we can return early
when no autostart is needed and avoid passing of the 'driver' object
which is already present in 'vm's' private data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The connection object is not needed when autostarting containers so we
can remove the machinery for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Remove the pointless 'cleanup' section and 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The function doesn't really need the connect object for anything besides
registering the autodestroy callback for it. If we merge it certain
callers can be simplified.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Add possibility for the caller to set the flags for the call to
'virLXCProcessCleanup'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
libvirt currently will block migration for any vfio-assigned device
unless it is a network device that is associated with a virtio-net
failover device (ie. if the hostdev object has a teaming->type ==
VIR_DOMAIN_NET_TEAMING_TYPE_TRANSIENT).
In the future there will be other vfio devices that can be migrated,
so we don't want to rely on this hardcoded block. QEMU 6.0+ will
anyway inform us of any devices that will block migration (as a part
of qemuDomainGetMigrationBlockers()), so we only need to do the
hardcoded check in the case of old QEMU that can't provide that
information.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The new code that queries QEMU about migration blockers was put at the
top of qemuMigrationSrcIsAllowed(), but that function can also be
called in the case of offline migration (ie when the domain is
inactive / QEMU isn't running). This check should have been put inside
the "if (!(flags & VIR_MIGRATE_OFFLINE))" conditional, so let's move
it there.
Fixes: 156e99f686
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The code is run with an async job and thus needs to make sure a nested
job is acquired before entering the monitor.
While touching the code in qemuMigrationSrcIsAllowed I also fixed the
grammar which was accidentally broken by v8.5.0-140-g2103807e33.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch removes and replaces virCHDomainObjInitJob() with
general virDomainObjInitJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch removes and replaces virLXCDomainObjInitJob() with
general virDomainObjInitJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch removes and replaces libxlDomainObjInitJob() with
general virDomainObjInitJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainObjInitJob() as virDomainObjInitJob()
into hypervisor in order to be used by other drivers as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have qemuCgroupAllowDevicePath() which sets up devices
controller for just one path. And if we have more paths we have
to call it in a loop. So far, we have just one such place, but
soon we'll have another one (for SGX memory). Separate the loop
into its own function so that it can be reused.
And while at it, move setting the default set of devices as the
first thing, right after all devices are disallowed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Inside of the qemuSetupDevicesCgroup() there's @deviceACL
variable, which points to a string list of devices that are
allowed in devices controller by default. This list can either
come from qemu.conf (cfg->cgroupDeviceACL) or from a builtin
@defaultDeviceACL. However, a multiline ternary operator is used
when setting the variable which is against our coding style.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
vDPA devices will be migratable soon, so we shouldn't unconditionally
block migration of any domain with a vDPA device. Instead, we should
rely on QEMU to make the decision when that info is available from the
query-migrate QMP command (QEMU versions too old to have that info in
the results of query-migrate don't support migration of vDPA devices,
so in that case we will continue to unconditionally block migration).
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Since QEMU 6.0, if QEMU knows that a migration would fail,
'query-migrate' will return an array of error strings describing the
migration blockers. This can be used to check whether there are any
devices/conditions blocking migration.
This patch adds a call to this query at the top of
qemuMigrationSrcIsAllowed().
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Since QEMU 6.0, if migration is blocked for some reason,
'query-migrate' will return an array of error strings describing the
migration blockers. This can be used to check whether there are any
devices, or other conditions, that would cause migration to fail.
This patch adds a function that sends this query via a QMP command and
returns the resulting array of reasons. qemuMigrationSrcIsAllowed()
will be able to use the new function to ask QEMU for migration
blockers, instead of the hardcoded guesses that libvirt currently has.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
since qemu 6.0, if migration is blocked for some reason, 'query-migrate'
will return an array of error strings describing the migration blockers.
This can be used to check whether there are any devices blocking
migration, etc.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
According to a9fe9569ab, the <acpi index='NNN'/> is only for PCI
devices. Remove the ref acpi from devices channel, smartcard, tpm,
redirdev, panic, hub because none of them has PCI address. And add the
ref acpi to iommu device.
Fixes: a9fe9569ab
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch prevents nesting of if conditions and makes the code
cleaner.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch alters members of virDomainObjPrivateJobCallbacks to
make the code more consistent.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainJobObj into hypervisor/ as generalized
virDomainJobObj along with generalized private job callbacks as
virDomainObjPrivateJobCallbacks.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch removes variable 'async', which is used only once, and
replaces it with direct comparison with an enum member.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was not causing any problems because all cases below were empty,
but in order to avoid future misbehavior, add a break to this case.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There's no need to use virBufferAddStr() for literal strings
without any newline character as it's more expensive than
virBufferAddLit().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
When formatting qemuCaps XML, the <cpudata/> element is
misaligned. This is because it contains multiple lines and
virBufferAsprintf() does not expect that. Switch to
virBufferAddStr() which does.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The G_GNUC_NO_INLINE macro will eventually be marked as
deprecated [1] and we are recommended to use G_NO_INLINE instead.
Do the switch now, rather than waiting for compile time warning
to occur.
1: 15cd0f0461
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Currently, we require glib-2.56.0 at minimum (because of RHEL-8)
but we use G_GNUC_NO_INLINE which was introduced in 2.58.0. While
we provide an implementation for older versions, where the macro
does not exists, it's a bit more tricky than that. Since we
define GLIB_VERSION_MAX_ALLOWED we would get a compile time error
when trying to use something too new, except for G_GNUC_NO_INLINE
which was intentionally not marked as
GLIB_AVAILABLE_MACRO_IN_2_58. But this is about to change with
glib-2.73.2 (which contains commit [1]).
At the same time, we can't just bump glib and thus we have to
provide an alternative implementation without the version
annotation.
1: a6f8fe071e
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
These wrapper functions were used to adapt the virObjectUnref() function
signature for different callbacks. But in commit 0d184072, the
virObjectUnref() function was changed to return a void instead of a
bool, so these adapters are no longer necessary.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The getters/setters for individual properties of migration
speed/downtime/cache size are unused once we switched to setting them
purely via migration parameters. Remove the unused helpers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'xbzrle-cache-size' parameter was added in qemu-2.11 thus all
supported qemu versions now use the new code path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'downtime-limit' field of 'migrate-set-parameters' was introduced in
qemu-2.8, thus all qemu versions supported by libvirt use the new code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'max-bandwidth' field was added as argument of
'migrate-set-parameters' in qemu-2.8, thus all qemu version supported by
libvirt already use the new code path.
This patch assumes the presence and removes the legacy code paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is just a glue to the testing article introduced in previous
commits.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It's not just strategy the master CI article talks (or will talk in the
future) about.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The article was replaced with a new one in previous commit, so we don't
need this one anymore.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The new article provides more in-depth information on testing options
in libvirt.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we don't have much information on how testing is done in
libvirt and the little we have is scattered among multiple files. This
patch creates a common landing page containing all important bits about
testing in libvirt, providing links to respective sections which
deserve their own articles.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since running our functional test suite in GitLab cannot make use of
the shared resources it makes sense to document the process of adding
own HW to run the custom libvirt executor that powers the integration
suite. This article will likely make even more sense in the future with
GitLab severely cutting down on shared CI resources.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Most importantly, how to get it, how install dependencies and how
to run it.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The dashboard itself simply takes away focus from everything else that
makes sense to have in the CI article, so move it to it's own article
and link it from the main CI article.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU offers two attributes for handling reset requests of an USB
host device: guest-reset and guest-resets-all. When combined they
act as follows:
1) guest-reset=false
The guest is not allowed to reset the physical USB device.
2) guest-reset=true,guest-resets-all=false
The guest is allowed to reset the device when it is not yet
initialized (aka no USB bus address assigned). Usually this results
in one guest reset being allowed. This is the default behavior.
3) guest-reset=true,guest-resets-all=true
The guest is allowed to reset the device as it pleases.
Now, there's a clear 1:1 mapping with our representation of
guestReset, so generating cmd line is trivial.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we have a capability, validate that the QEMU we are
talking to has everything we need for guestReset.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will need two attributes of usb-host device to set:
guest-reset and guest-resets-all. The former was introduced in
QEMU v4.0.0-rc0~56^2 and the other in v4.2.0-rc1~9^2. Hence,
track the latter only as it's only starting from that commit when
QEMU has both attributes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some USB devices have a buggy firmware that either crashes on
device reset, or make the device unusable in some other way.
Fortunately, QEMU offers a way to skip device reset either
completely, or if device is not initialized yet. Expose this
ability to users under:
<hostdev mode='subsystem' type='usb'>
<source guestReset='off'/>
</hostdev>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
My commit of v6.9.0-rc1~457 was a bit too harsh. While it served
its purpose (adding usb-host.hostdevice capability) it has a side
effect: because I copied reply from qemu-5.1.0 to older .replies
files one might now think that say qemu-3.1.0 supports both
.guest-reset and .guest-resets-all properties. But in fact it
doesn't. There are three problematic properties:
1) guest-reset, introduced in v4.0.0-rc0~56^2
2) guest-resets-all introduced in v4.2.0-rc1~9^2
3) suppress-remote-wake introduced in v5.0.0-rc0~148^2~4
Remove these properties from versions that could not have had
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, we have bunch of PCI/USB tests cases for
qemuxml2argvtest and qemuxml2xmltest but all of them run without
any capabilities. This makes is needlessly complicated when
trying to extend them. Switch to DO_TEST_CAPS_LATEST().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix docs illustrating call with an obsolete macro.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
While libvirt solves most of the problem of ensuring compatibility, when
there is incompatibility it can be hard for users to track down the
cause. Everything knows to check the physical CPU model, but there are a
surprisingly large number of other factors influencing compatibility.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Our man page already documents that iothreadset has --config
argument. Well, it doesn't really. Normally, I'd just fix the man
page, but with recent work on the API it's possible to tweak
values for inactive XML too. Therefore, implement the --config
argument for the command.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It was always possible to modify the inactive XML, because
VIR_DOMAIN_AFFECT_CURRENT (= 0) is accepted implicitly. But now
that the logic when changing both config and live XMLs is more
robust we can accept VIR_DOMAIN_AFFECT_CONFIG flag too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are three APIs that allow changing IOThreads:
virDomainAddIOThread()
virDomainDelIOThread()
virDomainSetIOThreadParams()
In case of QEMU driver these are handled by
qemuDomainChgIOThread() which attempts to be versatile enough to
work on both inactive and live domain definitions at the same
time. However, it's a bit clumsy - when a change to live
definition succeeds but fails in inactive definition then there's
no rollback. And somewhat rightfully so - changes to live
definition are in general harder to roll back. Therefore, do what
we do elsewhere (qemuDomainAttachDeviceLiveAndConfig(),
qemuDomainDetachDeviceAliasLiveAndConfig(), ...):
1) do the change to inactive XML first,
2) in fact, do the change to a copy of inactive XML,
3) swap inactive XML and its copy only after everything
succeeded.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When formatting IOThreads (in virDomainDefIOThreadsFormat()), we
may only output the number of IOThreads, or the full list of IOThreads too:
<iothreads>4</iothreads>
<iothreadids>
<iothread id='1' thread_pool_max='10'/>
<iothread id='2' thread_pool_min='2' thread_pool_max='10'/>
<iothread id='3'/>
<iothread id='4'/>
</iothreadids>
Now, the deciding factor here is whether those individual
IOThreads were so called 'autofill-ed' or user provided. Well, we
need to take another factor in: if an IOThread has pool size
limit set, then we ought to format the full list.
But how can we get into a situation when a thread is autofilled
(i.e. not provided by user in the XML) and yet it has pool size
limit set? virDomainSetIOThreadParams() is the answer.
Sure, we could also unset the autofill flag whenever a pool size
limit is being set. But this approach allows us to not format
anything if the limits are reset (we don't lose the autofill
information).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The <defaultiothread/> element is formatted inside
virDomainDefaultIOThreadDefFormat() which is called only from
virDomainDefIOThreadsFormat() (so that IOThread related stuff is
formatted calling one function). However, when there are no
<iothreadids/> defined (or only autoallocated ones are present),
then the outer formatting function exits early never calling the
<defaultiothread/> formatter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We accept TPM version in the domain XML. However, supported
version depends on the host (swtpm_setup binary) and thus it may
be tricky for users (or mgmt applications) chose a version.
Introduce machinery for reporting supported version in domain
capabilities.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These new capabilities will be used only to track whether
swtpm_setup is capable of TPM-1.2 and/or TPM-2.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Surprisingly, we don't document TPM part of domain capabilities.
Fortunately, the information exposed is pretty much self
explanatory, but we should document it regardless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'virtproxyd' doesn't have the '--listen' parameter and it's enough just
to enable the corresponding option in the config.
The config file is generic for all the daemons and we just omit/adjust
some sections. Adding a separate mechanism to omit the note about the
'--listen' parameter would be overkill so mention explicitly that it's
required only for libvirtd and not virtproxyd.
The section is omitted for other daemons.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2094641
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Extend the test for io_uring to also test startup policy.
Since the actual logic for dropping disks is in the host preparation
phase, thus skipped for tests we can use any file path.
Add a case also for 'file' backing to have all cases covered.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Apart from other changes this fixes failures with builds on FreeBSD.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The capabilities for that version were not updated from the development
version and thus would fail our upcoming minimum version change. Fake
the data to report 4.2.0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capabilities for that version were not updated from the development
version and thus would fail our upcoming minimum version change. Fake
the data to report 4.2.0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The cpu commandline is identical with the '-latest' version so there's
no need for a separate case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make it obvious that the fake cpu does not apply to the test cases based
on real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test was showing that the 'blockdev' capability is properly added
although we didn't detect it yet. Unfortunately this test can't be
carried over once we bump minimum qemu version to qemu-4.2.
Make the test case future-proof by removing the qemu-4.0.0 version which
would become pointless and use only already deprecated capability flags
so that the test output does not change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The tested net device has the same syntax with latest qemu so there's no
need to have a version-locked test for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The cpu feature formatting doesn't change between the versions thus we
can just keep the '-latest' versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The tested feature doesn't change across versions so we can use the
modern testing infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The version-locked version of the test data is identical to the 'latest'
version so we can remove them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prior to qemu-3.2 we'd have to disable the 'pconfig' feature explicitly
which is no longer needed with new qemu. Remove the version locked to
qemu-3.1 as the 'latest' case sufficiently handles what we want to test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the test data for qemu-2.11, qemu-2.12 and qemu-3.0 which are no
longer supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When virDomainSetIOThreadParams() API is called, well its QEMU
impl: qemuDomainSetIOThreadParams() then typed params are parsed
by qemuDomainIOThreadParseParams() into this
qemuMonitorIOThreadInfo struct. In the struct we have a <int,
bool> pair for every IOThread attribute we can tune through
monitor. The struct is then passed to
qemuMonitorJSONSetIOThread() which looks at the bool and if set
then the corresponding attribute is set to given value. Each
attribute is thus changed in a separate call. While this works
for attributes independent of each other ("poll-max-ns",
"poll-grow", "poll-shrink"), it does not always work for the
other attributes ("thread-pool-min" and "thread-pool-max").
The limitation here is that the lower boundary (minimum) has to
be lower (or equal to) the upper boundary (maximum) at all times.
This means, that in some cases we might need to set attributes in
reversed order to meet the constraint.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/339
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When using runtime setting of logging with 'virt-admin' it can be
confusing that the settings are discarded when the shutdown timeout of a
daemon is reached.
Add a note about this behaviour along with a suggestion to use
virt-admin to disable the behaviour if needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a simple command to drive the new 'virAdmConnectSetDaemonTimeout'
API.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use of the admin APIs to modify logging temporarily has a rather serious
deficiency when the daemon whose config is being changed is using
auto-shutdown (default with socket-activated deployments) as the
configuration is discarded if there is no client or VM/other object
blocking auto shutdown.
This API allows users to disable/postpone shutdown timeout so that the
configuration doesn't change under their hands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Improve:
KeyError: 'virAdmConnectSetDaemonTimeout'
to
Exception: Missing symbol file entry for 'virAdmConnectSetDaemonTimeout'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modify the code so that calling 'virNetDaemonAutoShutdown' will update
the auto shutdown timeout also for running daemons.
This involves changing the logic when to do the update of the timer so
that it can be called from both when the daemon is not yet runnign and
when doing a live update.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce 'virNetDaemonShutdownTimerRegister' and
'virNetDaemonShutdownTimerUpdate' to aggregate the code to deal with the
auto-shutdown timer.
The code is also placed so that it can be called from
'virNetDaemonAutoShutdown' which involved the move of
'virNetDaemonAutoShutdownTimer'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our coding style suggests 80 chars per line with error messages
being exception (for easier git-grep). Apply this exception onto
the newly created domain_postparse.c file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The domain post parse functions currently live in domain_conf.c
which thus grows always larger. Mimic what we've done for the
validation code and move the post parse code into a separate
file: domain_postparse.c.
I've started by moving every function with PostParse in its name
into the new file and then compile hunting for helper functions
only to move them as well.
In the end, I've moved virDomainDefPostParse symbol in
libvirt_private.syms into a new section. And while
virDomainDeviceDefPostParseOne() is made 'public' in
domain_postparse.h too, I'm not exporting it because it has no
caller outside src/conf/ and it's unlikely it ever will.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virDomainDefPostParseDeviceIteratorData struct is exported in
domain_conf.h because it's used in both domain_conf.c and
domain_validate.c. However, the latter usage is not warranted,
it's just a shortcut so that we don't have to introduce a similar
struct just for domain_validate.c. Well, do the extra step and
introduce a separate structure for domain_validate.c. This allows
us to move post parse code later on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To match the XML roots domainCapabilities and storagepoolCapabilities,
the wildcards should be *domainCap* and *storagepoolCap*.
Fixes: 7b0e2e4a55
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For a qcow2 storage volume with luks encryption created by qemu-img, its
dumped storage vol XML has no secret element in encryption:
<volume type='file'>
...
<encryption format='luks'>
</encryption>
...
</volume>
That will cause a failure in rng validation. Fix that validation failure.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In my previous commit I've introduced virDomainIOMMUDefValidate()
function with a switch() statement. However, two cases in it,
though empty, were not terminated with a break statement which
made compiler complain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Per v8.3.0-rc1~199 it's only a virtio IOMMU that can have
<address/>. The rest (Intel and SMMUv3) are system devices and
thus have no address associated with them. However, this
assumption is never checked for.
Fixes: b0eb1e193f
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The commit v8.3.0-rc1~199 introduced <address/> to <iommu/>
device. And while it updated the RNG it forgot to update the
docs. Fix that.
Fixes: b0eb1e193f
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two places where the @model member of
_virDomainIOMMUDef struct is typecasted to virDomainIOMMUModel
which is completely unnecessary because the struct already
defines the member of that type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The storage pool tests have host-specific versions which I neglected to
update in commit c44930d932 thus breaking
the test-suite on non-linux OSes.
Fixes: c44930d932
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Treat the 'protocolVer' field as a string so that e.g. '4.1' can be
used. Forbid only ',' in the string as it's a separator of arguments for
mount options.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Provide simple recipes for the most common high-level tasks.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
No sane firmware build will fail this check, but just to be on
the safe side let's check anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, a firmware configuration such as
<os firmware='efi'>
<firmware>
<feature enabled='yes' name='enrolled-keys'/>
</firmware>
</os>
will correctly pick a firmware that implements the Secure Boot
feature and initialize the NVRAM file so that it contains the
keys necessary to enforce the signing requirements. However, the
lack of a
<loader secure='yes'/>
element makes it possible for pflash writes to happen outside
of SMM mode. This means that the authenticated UEFI variables
where the keys are stored could potentially be overwritten by
malicious code running in the guest, thus making it possible to
circumvent Secure Boot.
To prevent that from happening, automatically turn on the
loader.secure feature whenever a firmware that implements Secure
Boot is chosen by the firmware autoselection logic. This is
identical to the way we already automatically enable SMM in such
a scenario.
Note that, while this is technically a guest-visible change, it
will not affect migration of existings VMs and will not prevent
legitimate guest code from running.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Regardless of whether firmware autoselection is in use, we
still want to parse the list of requested features. Doing this
will allow us to produce better error messages.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Generally speaking, when firmware autoselection is in use we
don't want any information to be provided manually. There are
two exceptions:
* we still want the path to the NVRAM file to be customizable;
* using <loader secure='yes'/> was how you would ask for a
firmware that implements the Secure Boot feature in the
original approach to firmware autoselection, so we want to
keep that working.
Anything else should result in a descriptive error.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/327
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This makes it explicit that there are two possible scenarios
(whether or not firmware autoselection is in use) and will make
upcoming changes cleaner to implement.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently we're simply ignoring some elements and attributes,
such as the loader path, when firmware autoselection is enabled
because we know we're not going to use them.
This makes sense, but has the unfortunate consequence of
confusing users who experience part of their configuration
simply going away for no apparent reason.
A more user-friendly approach is to produce meaningful error
messages in those scenarios. As a first step towards that goal,
stop conditionally parsing information.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This combination doesn't make sense and so the firmware
autoselection logic will not be able to find a suitable firmware,
but it's more user-friendly to report a detailed error upfront.
Note that this check would ideally happen in the validate phase,
but if we moved it there we would no longer be able to
automatically enable secure-boot when enrolled-keys=yes. Since
the combination never resulted in a working configuration, the
chances of this causing real-world VMs to disappear are
extremely low.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are currently no failure scenarios for the function, but
we're about to add one.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The latter doesn't make sense without the former, so make that
visible in the XML.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, the lack of a <loader> element results in the <nvram>
element being completely ignored, but this is unnecessarily
limiting: even when firmware autoselection is in use, it should
be possible for the user to specify a custom path for the NVRAM
file.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This makes the function more consistent with
virDomainLoaderDefParseXML() by preferring the virXMLProp
class of functions to XPath access.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We're going to start passing multiple nodes to the function in
a moment, so we need a more specific name.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All the data in the <nvram> element ends up in the same struct
as that coming from the <loader> element, so it makes sense to
have a single entry point for parsing an XML document into a
virDomainLoaderDef instance.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It belongs to virDomainLoaderDefParseXMLNvram(), where the other
parts of the <nvram> element are handled.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When the 'type' attribute is present we'd end up overwriting
this value via virDomainStorageSourceParse(). Moving this
assignment makes the current code clearer and will also help
with upcoming changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The previous name was identical, modulo the case, to the
completely unrelated virDomainNVRAMDefParseXML().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pure code movement, needed to prepare for upcoming changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Note that some of these new tests are displaying incorrect or
suboptimal behavior. When we address those in upcoming patches,
this will be highlighted by changes in the test data.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This currently has not effect whatsoever, so it's just cluttering
the input files.
We're going to add specific handling for this scenario, as well
as a test case covering it, in an upcoming commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This does the opposite of
commit 392292cd99
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Feb 23 12:45:51 2022 +0000
tests: don't use auto-generated NVRAM path in tests
in order to minimize input files.
We're going to add a test case specifically covering the use of
custom NVRAM paths with firmware autoselection in an upcoming
commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When testing firmware selection, we don't really care about any
of the hardware assigned to the VM, and in fact it's better to
keep it as minimal as possible to make sure that the focus
remains on the firmware bits.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Group all tests related to firmware selection together and give
them consistent names that leave room for further tests to be
added in an upcoming commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was introduced in
commit 5882064084
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Wed Feb 25 15:45:26 2015 +0100
tests: Add test for os interleaving
to ensure a recent change in the schema was behaving correctly.
Seven years later, it no longer seems very useful to keep it
around.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This simplifies the test data without negatively impacting test
coverage.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The pci-bridge-many-disks test case is not related to firmware
handling at all, so we can trim it without losing any coverage.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This supports sockets created by libvirt and passed by FD using the
same method as in security_dac.c.
Signed-off-by: David Michael <david@bigbadwolfsecurity.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
According to [1]:
Prior to GnuTLS 3.6.0 for the ephemeral or anonymous
Diffie-Hellman (DH) TLS ciphersuites the application was
required to generate or provide DH parameters. That is no
longer necessary as GnuTLS utilizes DH parameters and
negotiation from [RFC7919].
This allows us to:
a) drop the code that's setting DH params,
b) drop @dhParams member from _virNetTLSContext struct. and
c) drop gnutls_dh_params_generate2() mock.
1: https://www.gnutls.org/manual/html_node/Parameter-generation.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Released almost 5 years ago, gnutls-3.6.0 brings some important
features (which are utilized in next commit). Hence, require that
version at least.
Per repology, currently shipped versions are:
RHEL-8: 3.6.16
RHEL-9: 3.7.3
Debian 11: 3.7.1
Debian 12: 3.7.6
openSUSE Leap 15.3: 3.6.7
Ubuntu LTS 20.04: 3.6.13
Ubuntu LTS 22.04: 3.7.3
FreeBSD 12: 3.7.6
Fedora 34: 3.7.4
Fedora 35: 3.7.6
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ever since v7.6.0-rc1~235 we can use ovs-vsctl to set QoS instead
of tc. However, we don't have a test that's verifying generated
cmd line for ovs-vsctl.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Our coding style expects a long line to be broken into shorter
lines which are then aligned on the first character, for
instance:
"some string that's broken "
"into multiple lines"
However, one can argue that there are few cases where shifting
the alignment makes the code more readable. And this is the case
of expected cmd line for DO_TEST_SET() where a long cmd line can
be aligned on the arguments rather than the binary:
TC " filter ..."
" police ..."
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The last usage of the testMinimalStruct struct was removed in
v1.2.2-rc1~206 which forgot to remove the struct as well. Remove
it now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Some cases that call DO_TEST_SET() macro wrap each argument in
curved brackets. This is unnecessary, drop the brackets.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When resuming post-copy migration users may want to limit the bandwidth
used by the migration and use a value that is different from the one
specified when the migration was originally started.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/333
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
So the we can apply selected migration parameters even when resuming
post-copy migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We will need to annotate individual parameters a bit more than just
noting their type. Let's introduce qemuMigrationParamInfo replacing
simple qemuMigrationParamTypes with an array of structs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The flags will later be used to determine which parameters should
actually be applied.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
My original commit v8.4.0-288-gf01fc4d119 accidentally forgot to fix
both instances of the same problem. While it fixed the destination side
of migration, the source one remained broken.
However, that commit was also wrong in saying the issue could have
caused unlimited memory locking to be allowed for QEMU when RDMA
migration was used. It could not, because the code would refuse to even
think about starting RDMA migration if hard_limit was not set. But
avoiding the "mem.hard_limit > 0" check is useful anyway.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduced in v8.4.0-rc1~183 but the first real problem
introduced in v8.4.0-rc1~170, there's a
qemuBuildInterfaceConnect() call inside of
qemuDomainAttachNetDevice(). If the former fails, then the
function is immediately returned from instead of jumping onto the
cleanup label. This is crucial, because at this point the domain
definition contains 'borrowed' net definition, which is then
freed, since an error was met. The domain definition is then left
with a dangling pointer which leads to all sorts of different
crashes.
Fixes: 29d022b1eb
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2102009
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When introducing VIR_DOMAIN_IOTHREAD_THREAD_POOL_MIN and
VIR_DOMAIN_IOTHREAD_THREAD_POOL_MAX typed parameters, I've made a
shortcut. Since at the monitor level these two are set in two
separate calls and minimum has to be always smaller than maximum
(or equal to it), it may happen that one of the values we want to
set violates this restriction. So I've put a little note in the
public API description warning users about this.
However, the proper solution is to have a logic that checks the
current values and based on that set either minimum or maximum
value first. But until we get there, remove that note from the
public API before it gets released.
Related: https://gitlab.com/libvirt/libvirt/-/issues/339
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
An explicit limit would be more user friendly. Add the limit to error message.
Before this commit:
```
error: requested size must be smaller than or equal to @size
```
Now:
```
error: requested size must be smaller than or equal to @size (8388608KiB)
```
Signed-off-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are couple of features/improvements/bugfixes I contributed
into the upcoming release. Include those worth mentioning in the
NEWS.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add <interleave> to allow the subproperties to be specified in any
order.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Document the format of the 'readahead' and 'timeout' XML elements more
accurately.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The flag can be used to enable zero-copy mechanism for migrating memory
pages.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our documentation says RDMA migration requires hard_limit to be set so
that we know how big memory locking limit should be set for the domain
during migration. But since commit v1.2.13-71-gcf521fc8ba (which changed
the default hard_limit value from 0 to
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED) we were actually setting memlock
limit to unlimited if hard_limit was not set.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For RDMA migration we update memory locking limit, but never set it back
once migration finishes (on the destination host) or aborts (on the
source host).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This helper will not try to set the limit if it is already big enough,
which may be useful when libvirt daemon is running in a containerized
environment and is not allowed to change memory locking limit.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainAdjustMaxMemLock combined computing the desired limit with
applying it. This patch separates the code to apply a memory locking
limit to a new qemuDomainSetMaxMemLock helper for better reusability.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For all file formats, the length of the size field is assumed
and hardcoded to be 8 bytes.
Fix the length for the ploop format - since we specify the offset,
we read 8 bytes of the length, not 0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Evaluate the XPath as a boolean, instead of trying to get a node
out of it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The mailman for mailing lists hosted by Red Hat seems to have moved
to listman.redhat.com. While the old links still seem to work,
point our docs to the new location to avoid the redirect.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use VIR_AUTOCLOSE for the remaining file descriptor that uses
manual cleanup and remove the label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use g_autofree for the two strings still using manual cleanup
and remove the pointless cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Convert all the cases where we can unconditionally free
the virURI at the end of scope.
In libxlDomainMigrationDstPrepare, uri is only filled
if uri_in was present, so moving the virURIFree out of
the condition is safe.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The result of the <= 0 comparison was assigned to 'rc', rendering the
if (rc == 0) condition dead code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When domain startup fails, domain cleanup calls
libxlNetworkUnwindDevices, which calls virGetConnectNetwork, which
is a top level API entry point, which resets the initial saved error,
leading to clients seeing:
error: An error occurred, but the cause is unknown
This preserves the error around the entire teardown process, similar
to what is done in the qemu driver.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Replace tpm->type and tpm->model qemuCaps validation with the
similar logic in domcaps.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Don't restrict this to domcaps testing only, we will soon
need it for qemu command line validation
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The qemu `tpm-tis` device is an ISA device, so only really applicable
to x86 archs. For all non-x86 archs we should use `tpm-tis-device`
This fixes tpm-tis usage on armv7l and riscv
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
When firewalld is restarted or has its rules reloaded, we trigger a
reload of the nwfilter driver. This is done directly in the main
event loop thread which is a bad idea.
In a previous commit we fixed a actual deadlock problem with the
virStateReload API, when triggered from SIGHUP:
commit 33c6eb9689
Author: Jim Fehlig <jfehlig@suse.com>
Date: Thu Mar 8 15:04:48 2018 -0700
libvirtd: fix potential deadlock when reloading
The same deadlock problem previously existed with the firewalld reload
trigger, however, today it is not quite so series. The QEMU driver uses
a private event thread for each VM, so the particular deadlock would
not occur. None the less during the time the filters are reloading all
use of the event loop is blocked, which prevents APIs being serviced.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
While you can chain the virsh output up to a later 'xmllint' or 'xpath'
command, integrating it into virsh avoids needs for installing extra
binaries which we've often found to be missing on production installs
of libvirt. It also gives better response if the initial virsh command
hits an error, as you don't get an aborted pipeline.
$ virsh pool-dumpxml --xpath //permissions default
<permissions>
<mode>0711</mode>
<owner>1000</owner>
<group>1000</group>
<label>unconfined_u:object_r:svirt_home_t:s0</label>
</permissions>
If multiple nodes match, they are emitted individually:
$ virsh dumpxml --xpath '//devices/*/address[@type="pci"]' --wrap demo
<address type="pci" domain="0x0000" bus="0x05" slot="0x00" function="0x0"/>
<address type="pci" domain="0x0000" bus="0x03" slot="0x00" function="0x0"/>
...snip...
<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x0" multifunction="on"/>
<address type="pci" domain="0x0000" bus="0x07" slot="0x00" function="0x0"/>
but if intending to post-process the output further, the results
can be wrapped in a parent node
$ virsh dumpxml --xpath '//devices/*/address[@type="pci"]' --wrap demo
<nodes>
<address type="pci" domain="0x0000" bus="0x05" slot="0x00" function="0x0"/>
<address type="pci" domain="0x0000" bus="0x03" slot="0x00" function="0x0"/>
...snip...
<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x0" multifunction="on"/>
<address type="pci" domain="0x0000" bus="0x07" slot="0x00" function="0x0"/>
</nodes>
Fixes https://gitlab.com/libvirt/libvirt/-/issues/244
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The trivial case of fully printing an XML document is boring, but
this helper does more by allowing an XPath expression to be given.
It will then print just the subset of nodes which match the
expression. It either print each match as a standalone XML doc
or can put them into one new XML doc wrapped woith <nodes>...</nodes>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Internally we already collect x86 host family + model + stepping
numeric values. This exposed them in capabilities CPU output.
Example:
$ sudo virsh capabilities | grep -A1 -B1 signature
<microcode version='240'/>
<signature family='6' model='94' stepping='3'/>
<counter name='tsc' frequency='3408010000' scaling='no'/>
Users need to know these values to calculate an expected.
SEV-ES/SEV-SNP launch measurement.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We explicitly check whether the value is YES or NO, which makes
it unnecessary to make sure it's not ABSENT beforehand.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Even when the os.loader element is absent, we still have to
validate that the user is not attempting to use firmware
autoselection with a driver that doesn't implement the feature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The feature was implemented in commits b4e34d1083 and
9bb6e4e739 but the corresponding feature flag was not set in
the driver, so other parts of of libvirt wouldn't be able to
know about it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update the default "driver" value for hostdev interface since
the default is not "KVM" anymore (refer to "Host device
asssignment" part and by test results). And update the mac
address in one xml example.
Signed-off-by: Yalan Zhang <yalzhang@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The check was historically done only for _TYPE_VOLUME disks, but
refactors to allow _TYPE_VOLUME disks in the backing chain caused a
regression where we'd reject startupPolicy also for _TYPE_BLOCK disks
which historically worked well.
Fix it by using the 'virDomainDiskDefValidateStartupPolicy' helper and
use it only when the top level image is a _TYPE_VOLUME as in other cases
it was already validated. This also allows _TYPE_BLOCK volumes to use
startup policy.
Fixes: 37f01262ee
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2095758
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our startup policy checkers work only for local paths, so disk sources
such as NVMe, or vhost-user can't be used with startup policy.
Unfortunately the validation did not catch these cases. Fix it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the code into 'virDomainDiskDefValidateStartupPolicy' which will be
later reused in the qemu driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove linebreak and mention the attribute name. Also prepare the error
messages for future by substituting the type of offending access.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch introduces the logic to format and parse remote NVRAM.
Update NVRAM element schema, and docs for supporting network backed
NVRAM. NVRAM backed over network would give the flexibility to start
the VM on any host without having to worry about where to get the latest
nvram image.
<nvram type='network'>
<source protocol='iscsi' name='iqn.2013-07.com.example:iscsi-nopool/0'>
<host name='example.com' port='6000'/>
</source>
</nvram>
or
<nvram type='file'>
<source file='/var/lib/libvirt/nvram/guest_VARS.fd'/>
</nvram>
In the qemu driver we will support the new definition only with qemu's
supporting -blockdev.
Signed-off-by: Prerna Saxena <prerna.saxena@nutanix.com>
Signed-off-by: Florian Schmidt <flosch@nutanix.com>
Signed-off-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Introduce virDomainLoaderDefFormatNvram and extract the code to it so
that it's self-contained in upcoming patches adding more complex logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Prepare for network backed nvram by refusing the reset of nvram on boot
and don't check whether it exists. We will not support filling it from a
template.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
We don't really use it besides when starting up the VM so when
reconnecting this step is totally pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Use the designated helpers for virStorageSource instead using the
file-based ones with a check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Since we now have a full virStorageSource for storing the nvram path we
don't need the extra dance of transferring the data into the 'pflash1'
variable which was an intermediary solution to use -blockdev.
For now we keep it functionally identical to the previous impl.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Extract the internals of qemuDomainPrepareStorageSourceBlockdev into
qemuDomainPrepareStorageSourceBlockdevNodename so that we can reuse it
when instantiating the virStorageSource for pflash backing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
This is a partial revert of 87a43a907f
The change to use g_clear_pointer() in more places was accidentally
applied to cases involving vir_g_source_unref().
In some cases, the ordering of g_source_destroy() and
vir_g_source_unref() was reversed, which resulted in the source being
marked as destroyed, after it is already unreferenced. This
use-after-free case might work in many cases, but with versions of
glib older than 2.64.0 it may defer unref to run within the main
thread to avoid a race condition, which creates a large distance
between the g_source_unref() and g_source_destroy().
In some cases, the call to vir_g_source_unref() was replaced with a
second call to g_source_destroy(), leading to a memory leak or worse.
In our experience, the symptoms were that use of libvirt-python became
slower over time, with OpenStack nova-compute initially taking around
one second to periodically query the host PCI devices, and within an
hour it was taking over a minute to complete the same operation, until
it is was eventually running this query back-to-back, resulting in the
nova-compute process consuming 100% of one CPU thread, losing its
RabbitMQ connection frequently, and showing up as down to the control
plane.
Signed-off-by: Mark Mielke <mark.mielke@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When creating a TAP interface we can end up with multiple FDs,
each representing one queue. However, these FDs must be
relabelled as they are then passed to QEMU. In case of
qemuBuildInterfaceConnect() we allocate the array for the FDs and
then let function corresponding to the <interface/> type to fill
the array with FDs. When any of the functions meets an error,
it's also responsible for closing previously opened FDs. However,
the functions take a shortcut: iterate through each member of the
array and close it (if it's non-negative). This assumes that the
array is initialized to negative values, which use to be the case
before rewrite in v8.4.0-rc1~170 but after it it's no longer the
case. Subsequently, "random" FDs are closed (okay, not that
random since the array is allocated via g_new0(), but hey - FD 0
is still valid FD and might be valuable, actually).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2075383#c18
Fixes: 7a38d3946b
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For some types of SRIOV interfaces we create a temporary file
where the state of the interface is saved before we start
modifying it. The file is used then to restore the original
configuration when the interface is no longer associated with any
guest. For writing the file virFileWriteStr() is used. However,
it's given wrong argument: the last argument is supposed to be
mode to create the file with but virNetDevSaveNetConfig() passes
open(2) flags (O_CREAT|O_TRUNC|O_WRONLY). We need the file to be
writable and readable by root only (0600). Therefore, pass that
mode instead of gibberish.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit v7.1.0-136-g6a6d6bb520 refactored virProcessSetMaxMemLock by
moving its part into a new virProcessSetLimit, but lost "return -1" on
error.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since the main-loop and iothread classes are derived from the
same class (EventLoopBaseClass) we don't need new capability and
can use QEMU_CAPS_IOTHREAD_THREAD_POOL_MAX directly to check
whether QEMU's capable of setting defaultiothread pool size.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As of v7.0.0-877-g70ac26b9e5 QEMU exposes its default event loop
for devices with no IOThread assigned as an QMP object. In the
very next commit (v7.0.0-878-g71ad4713cc) it was extended for
thread-pool-min and thread-pool-max attributes. Expose them under
new <defaultiothread/> element.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since virsh implements a wrapper over virDomainSetIOThreadParams()
(command iothreadset) let's wire up new typed parameters there too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced in previous commit, QEMU driver needs to be taught how
to set VIR_DOMAIN_IOTHREAD_THREAD_POOL_MIN and
VIR_DOMAIN_IOTHREAD_THREAD_POOL_MAX parameters on given IOThread.
Fortunately, this is fairly trivial to do and since these two
parameters are exposed in domain XML too the update of inactive
XML can be wired up too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Our public API offers virDomainSetIOThreadParams() function which
allows users to set various aspects of IOThreads. Introduce two
new typed parameters: VIR_DOMAIN_IOTHREAD_THREAD_POOL_MIN and
VIR_DOMAIN_IOTHREAD_THREAD_POOL_MAX which will allow users to
modify the thread-pool-min and thread-pool-max attributes of an
iothread.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that we have a capability that reflects whether QEMU is
capable of setting iothread pool size, let's introduce a
validator check to make sure users are not trying to use this
feature with QEMU that doesn't support it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This capability reflects whether QEMU allows setting
thread-pool-min and thread-pool-max attributes on iothread
object. Since both attributes were introduced in the same commit
(v7.0.0-878-g71ad4713cc) and can't exist independently of each
other we can stick with one capability covering both of them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
At least in case of QEMU an IOThread is actually a pool of
threads (see iothread_set_aio_context_params() in QEMU's code
base). As such, it can have minimal and maximal number of worker
threads. Allow setting them in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
So far, iothread configuration structure (virDomainIOThreadIDDef)
is allocated by plain g_new0(). This is perfectly okay because
all members of the struct default to value 0 anyway. But soon
this is going to change. Therefore, replace those g_new0() with a
function so that the default value can be set consistently in one
place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Formatting iothreads is currently open coded inside of
virDomainDefFormatInternalSetRootName(). While this works, it
makes the function needlessly long, especially if the formatting
code will expand in near future. Therefore, move it into a
separate function. At the same time, make
virDomainDefIothreadShouldFormat() accept const domain definition
so that the new function can also accept const domain definition.
Formatters shouldn't need to change definition.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In virDomainIOThreadIDDefArrayInit() the variable @iothrid is
used only inside a loop but is declared for whole function. Bring
the variable into the loop so that it's obvious that the variable
is not used elsewhere.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Using g_autoptr() for @iothrid variable inside
virDomainDefParseIOThreads() allows us to drop explicit call to
virDomainIOThreadIDDefFree() in one case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For easier attribute parsing we have virXMLProp*() family of
functions. These accept flags through which a caller can pose
some conditions onto the attribute value, for instance:
VIR_XML_PROP_NONZERO when the attribute may not be zero, etc.
What we are missing is VIR_XML_PROP_NONNEGATIVE when the
attribute value may be non-negative. Obviously, this flag makes
sense only for some members of the virXMLProp*() family.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This requires publishing the RPMs as artifacts from the regular
build job.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since a fix for CVE-2022-24765 was released every git command is now
checked against the context repo in which it's supposed to run
resulting in a fatal error if the repo is owned by other user than the
one running the git command.
This means that in order to be able to do 'sudo make install', we have
to set the 'safe.directory' for the root user. This is because QEMU
runs 'git submodule update' automatically on 'make install'.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Virsh has iothreadset command which allows setting various
attributes of IOThreads. However, when the command is called
without any arguments (besides domain and IOThread IDs), then
@params stays NULL and is passed to virDomainSetIOThreadParams()
which produces rather user unfriendly error message:
error: params in virDomainSetIOThreadParams must not be NULL
Introduce a check and produce better error message.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
They were constructed from two separate strings using "%s: %s", which
is ugly and does not work well with translations.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When a domain has a guest agent channel enabled and the agent is running
in the guest, we will get VSERPORT_CHANGE event on a destination host as
soon as we start vCPUs there. This is not an issue for normal migration,
but post-copy migration will remain running after we started vCPUs on
the destination. If it runs for more than 30s, the VSERPORT_CHANGE event
handler will fail to get a job and log the following error message:
Timed out during operation: cannot acquire state change lock (held
by monitor=remoteDispatchDomainMigrateFinish3Params)
and of course we will think the guest agent is not connected and thus
all APIs talking to it will fail. Until the agent or libvirt daemon is
restarted.
Luckily we only need to update the channel state (to mark it as
connected) and connect to the agent neither of which conflicts with
migration. Thus we can safely enable processing this event during
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is a special job for operations that need to modify domain state
during an active migration. The modification must not affect any state
that could conflict with the migration code. This is useful mainly for
event handlers that need to be processed during migration and which
could otherwise time out on acquiring a normal MODIFY job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since all parts of post-copy recovery have been implemented now, it's
time to enable the corresponding flag.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Every single call to qemuMigrationJobContinue needs to register a
cleanup callback in case the migrating domain dies between phases or
when migration is paused due to a failure in postcopy mode.
Let's integrate registering the callback in qemuMigrationJobContinue to
make sure the current thread does not release a migration job without
setting a cleanup callback.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The callback will properly cleanup non-p2p migration job in case the
migrating domain dies between Begin and Perform while the client which
controls the migration is not cooperating (normally the API for the next
migration phase would handle this).
The same situation can happen even after Prepare and Perform phases, but
they both already register a suitable callback, so no fix is needed
there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Normally the structure is created once the source reports completed
migration, but with post-copy migration we can get here even after
libvirt daemon was restarted. It doesn't make sense to preserve the
structure in our status XML as we're going to rewrite almost all of it
while refreshing the stats anyway. So we just create the structure here
if it doesn't exist to make sure we can properly report statistics of a
completed migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Everything was already done in the normal Finish phase and vCPUs are
running. We just need to wait for all remaining data to be transferred.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The QEMU process is already running, all we need to do is to call
migrate-recover QMP command. Except for some checks and cookie handling,
of course.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Non-postcopy case talks to QEMU monitor and thus needs to create a
nested job. Since qemuMigrationAnyConnectionClosed is called in case
there's no thread processing a migration API, we need to make the
current thread a temporary owner of the migration job to avoid "This
thread doesn't seem to be the async job owner: 0". This is done by
starting a migration phase.
While no monitor interaction happens in postcopy case and just setting
the phase (to indicate a broken postcopy migration) would be enough,
being consistent and setting the owner does not hurt anything.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function is now called qemuMigrationAnyConnectionClosed to make it
clear it is supposed to handle broken connection during migration. It
will soon be used on both sides of migration so the "Src" part was changed
to "Any" to avoid renaming the function twice in a row.
The original *Cleanup name could easily be confused with cleanup
callbacks called when a domain is destroyed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This command tells QEMU to start listening for an incoming post-copy
recovery connection. Just like migrate-incoming is used for starting
fresh migration on the destination host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Offline migration jumps over a big part of qemuMigrationDstPrepareFresh.
Let's move that part into a new qemuMigrationDstPrepareActive function
to make the code easier to follow.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Moves most of the code from qemuMigrationDstPrepareAny to a new
qemuMigrationDstPrepareFresh so that qemuMigrationDstPrepareAny can be
shared with post-copy resume.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It just calls migrate QMP command with resume=true without having to
worry about migration capabilities or parameters, storage migration,
etc. since everything has already been done in the normal Perform phase.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
qemuMigrationSrcRun does a lot of thing before and after telling QEMU to
start the migration. Let's make the core reusable by moving it to a new
qemuMigrationSrcStart function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Mostly we just need to check whether the domain is in a failed post-copy
migration that can be resumed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For historical reasons we automatically enabled VIR_MIGRATE_PAUSED flag
when a migration was started for a paused domain. However, when resuming
failed post-copy migration the domain on the source host will always be
paused (as it is already running on the destination host). We must avoid
enabling VIR_MIGRATE_PAUSED in this case.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This flag can be used to restart post-copy migration once it failed
because of a broken connection.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This phase marks a migration protocol as broken in a post-copy phase.
Libvirt is no longer actively watching the migration in this phase as
the migration API that started the migration failed.
This may either happen when post-copy migration really fails (QEMU
enters postcopy-paused migration state) or when the migration still
progresses between both QEMU processes, but libvirt lost control of it
because the connection between libvirt daemons (in p2p migration) or a
daemon and client (non-p2p migration) was closed. For example, when one
of the daemons was restarted.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Both qemuMigrationJobSetPhase and qemuMigrationJobStartPhase were doing
the same thing, which made little sense. Let's follow the difference
between qemuDomainObjSetJobPhase and qemuDomainObjStartJobPhase and
change job owner only in qemuMigrationJobStartPhase.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We will want to update migration phase without affecting job ownership.
Either in the thread that already owns the job or from an event handler
which only changes the phase (of a job no-one owns) without assuming it.
Let's move the ownership change to a new qemuDomainObjStartJobPhase
helper and let qemuDomainObjSetJobPhase set the phase without touching
ownership.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The check can reveal a serious bug in our migration code and we should
not silently ignore it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Into a new qemuMigrationCheckPhase helper, which can be reused in other
places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When recovering from a failed post-copy migration, we need to go through
all migration phases again, but don't need to repeat all the steps in
each phase. Let's create a new set of migration phases dedicated to
post-copy recovery so that we can easily distinguish between normal and
recovery code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Turn the final part of Begin phase formatting a domain XML for migration
into a reusable helper.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When libvirt daemon is restarted during an active post-copy migration,
we do not always mark the migration as broken. In this phase libvirt is
not really needed for migration to finish successfully. In fact the
migration could have even finished while libvirt was not running or it
may still be happily running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We want to use query-migrate QMP command to check the current migration
state when reconnecting to active domains, but the reply we get to this
command may not contain any statistics at all if called on the
destination host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
So far migration could only be completed while a migration API was
running and waiting for the migration to finish. In case such API could
not be called (the connection that initiated the migration is broken)
the migration would just be aborted or left in a "don't know what to do"
state. But this will change soon and we will be able to successfully
complete such migration once we get the corresponding event from QEMU.
This is specific to post-copy migration when vCPUs are already running
on the destination and we're only waiting for all memory pages to be
transferred. Such post-copy migration (which no-one is actively
watching) is called unattended migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When reconnecting to an active domain we need to use a different job
structure than the one referenced from the VM object.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Normally migrationPort is released in the Finish phase, but we need to
make sure it is properly released also in case qemuMigrationDstFinish is
not called at all. Currently the only callback which is called in this
situation qemuMigrationDstPrepareCleanup which already releases
migrationPort. This patch adds similar handling to additional callbacks
which will be used in the future.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
By separating it into a dedicated qemuMigrationSrcComplete function
which can be later called in other places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function which started a migration phase should also finish it by
calling qemuMigrationJobFinish/qemuMigrationJobContinue so that the code
is easier to follow.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Refactors qemuMigrationDstFinish by moving some parts to a dedicated
function for easier introduction of postcopy resume code without
duplicating common parts of the Finish phase. The goal is to have the
following call graph:
- qemuMigrationDstFinish
- qemuMigrationDstFinishOffline
- qemuMigrationDstFinishActive
- qemuMigrationDstFinishFresh
- qemuMigrationDstFinishResume
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Refactors qemuMigrationDstFinish by moving some parts to a dedicated
function for easier introduction of postcopy resume code without
duplicating common parts of the Finish phase. The goal is to have the
following call graph:
- qemuMigrationDstFinish
- qemuMigrationDstFinishOffline
- qemuMigrationDstFinishActive
- qemuMigrationDstFinishFresh
- qemuMigrationDstFinishResume
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Refactors qemuMigrationDstFinish by moving some parts to a dedicated
function for easier introduction of postcopy resume code without
duplicating common parts of the Finish phase. The goal is to have the
following call graph:
- qemuMigrationDstFinish
- qemuMigrationDstFinishOffline
- qemuMigrationDstFinishActive
- qemuMigrationDstFinishFresh
- qemuMigrationDstFinishResume
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We want to prevent our error path that can potentially kill the domain
on the destination host from overwriting an error reported earlier, but
we were only doing so in one specific path when starting vCPUs fails.
Let's do it in all paths.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
By separating it into a dedicated qemuMigrationDstComplete function
which can be later called in other places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The final part of Finish phase will be refactored into a dedicated
function and we don't want to generate the cookie there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Let's call it "error" so that it's clear the label is only used in
failure path.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Most of the code in "endjob" label is executed only on failure. Let's
duplicate the rest so that the label can be used only in error path
making the success path easier to follow and refactor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Code executed only when dom != NULL can be moved before "endjob" label,
to the only place where dom is set.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When connection breaks during post-copy migration, QEMU enters
'postcopy-paused' state. We need to handle this state and make the
situation visible to upper layers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Even though a migration is paused, we still want to see the amount of
data transferred so far and that the migration is indeed not progressing
any further.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Migration is a job which takes some time and if it succeeds, there's
nothing to call another migration on. If a migration fails, it might
make sense to rerun it with different arguments, but this would only be
done once the first migration fails rather than while it is still
running.
If this was not enough, the migration job now stays active even if
post-copy migration fails and anyone possibly retrying the migration
would be waiting for the job timeout just to get a suboptimal error
message.
So let's special case getting a migration job when another one is
already active.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Jobs that are supposed to remain active even when libvirt daemon
restarts were reported as started at the time the daemon was restarted.
This is not very helpful, we should restore the original timestamp.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since we keep the migration job active when post-copy migration fails,
we need to restore it when reconnecting to running domains.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When migration fails after it already switched to post-copy phase on the
source, but early enough that we haven't called Finish on the
destination yet, we know the vCPUs were not started on the destination
and the source host still has a complete state of the domain. Thus we
can just ignore the fact post-copy phase started and normally abort the
migration and resume vCPUs on the source.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When post-copy migration fails, we can't just abort the migration and
resume the domain on the source host as it is already running on the
destination host and no host has a complete state of the domain memory.
Instead of the current approach of just marking the domain on both ends
as paused/running with a post-copy failed sub state, we will keep the
migration job active (even though the migration API will return failure)
so that the state is more visible and we can better control what APIs
can be called on the domains and even allow for resuming the migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The code for setting up a previously active backup job in
qemuProcessRecoverJob is generalized into a dedicated function so that
it can be later reused in other places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It is used for saving job out of domain object. Just like
virErrorPreserveLast is used for errors. Let's make the naming
consistent as Restore would suggest different semantics.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function can be used as a callback for qemuDomainCleanupAdd to
automatically clean up a migration job when a domain is destroyed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The events would normally be triggered only if we're changing domain
state. But most of the time the domain is already in the right state and
we're just changing its substate from {PAUSED,RUNNING}_POSTCOPY to
*_POSTCOPY_FAILED. Let's emit lifecycle events explicitly when post-copy
migration fails to make the failure visible without polling.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
There's no need to artificially pause a domain when post-copy fails
from our point of view unless QEMU connection is broken too as migration
may still be progressing well.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This new "post-copy failed" reason for the running state will be used on
the destination host when post-copy migration fails while the domain is
already running there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Notable changes:
- Icelake-Client cpu model family removed:
"Icelake-Client-noTSX-x86_64-cpu"
"Icelake-Client-v1-x86_64-cpu"
"Icelake-Client-v2-x86_64-cpu"
"Icelake-Client-v3-x86_64-cpu"
"Icelake-Client-x86_64-cpu"
- 'zero-copy-send' migration feature added
- display 'sdl' qapified
- 'arch-lbr' cpu feature added
- new HyperV enlightenments:
'hv-tlbflush-ext'
'hv-tlbflush-direct'
'hv-emsr-bitmap'
'hv-xmm-input'
- 'none-machine' has two new properties:
- "boot" described as "Boot configuration"
- "memory" described as "Memory size configuration"
- 'igd-passthrough-isa-bridge' is now Xen-only
- CXL: Compute eXpress Link related devices:
"CXL"
"cxl-rp",
"cxl-type3",
"pxb-cxl",
"pxb-cxl-bus",
"pxb-cxl-host",
- 'dma-translation' feature of 'intel-iommu'
- 'vmcb-clean' cpu feature now migratable:
- possibly due to host kernel upgrade
- changes commandline generated for the 'cpu-host-model' case of
qemuxml2argvtest
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We need to use the 'name' variable and just overwrite it with the FD
number when FDs are passed on the monitor. Otherwise we will read NULL
path if the FD is accessed before being passed on the monitor. The idea
of this helper is to simplify the monitor code so it would be
counterproductive to have other behaviour.
Fixes the following symptom:
$ virsh attach-interface cd network default --model virtio
error: Failed to attach interface
error: internal error: unable to execute QEMU command 'netdev_add': File descriptor named '(null)' has not been found
Fixes: bca9047906
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/318
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2092856
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the 'k' modifier for integers introduce 'K' for long
integers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Obtaining a screenshot via virDomainScreenshot() works like this:
1) we create a temp file, label it, then
2) tell QEMU to store the screenshot into it, and
3) finally, open the file for transfer via virStream
Since the file is just temporary and even explicitly unlinked at
the end, no seclabel restoration is done. This makes perfect
sense for security models which attach a label to file itself
(DAC, SELinux) because the label is gone with the file. However,
for models where a list of files and allowed actions is kept on a
side (AppArmor) this approach means we just append files into the
profile and never remove them. In turn, the file grows and policy
update takes longer with each entry.
Restore the seclabel for AppArmor's sake.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The virStorageSourceGetActualType() function returns either
virStorageSource->type (which is of type virStorageType), or
virStorageSourcePoolDef->type, which really stores a value of the
same enum. Thus, the latter struct can be changed so that the
virStorageSourceGetActualType() function can return correct type
instead of generic int.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
There are three places (two in domain_conf.c and one in
qemu_migration.c) where a virStorageSource->type is typecasted to
virStorageType (for the purpose of catching missing enum member
in a switch() statement at compile time). This is needless,
because as of v8.2.0-rc1~120 the struct member is of proper type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Commit a1465e661e added the 'manual' disk snapshot mode documentation
but didn't allow it in the schema as default snapshot mode for a disk.
Add the needed value into the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Certain documentation bits tried to put a reference of a value into
quotes, but that's not needed for both the pure view of the rST source
and the rendered output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace the two outstanding invocations and remove the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'virNetMessageEncodePayloadRaw' is not supposed to be called with 'NULL'
data, but the code path from 'virNetClientStreamSendPacket' does so.
Now 'virNetMessageEncodePayloadEmpty' is intended for such case, but
since it's just a sub-set of steps from 'virNetMessageEncodePayloadRaw'
it's more straightforward to add NULL-tolerance to 'virNetMessageEncodePayloadRaw'
and subsequently remove 'virNetMessageEncodePayloadEmpty'.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/308
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We've emulated the function in virHashSteal, with a note pointing to use
the proper version. Move the code to glibcomapt.c and make it such that
builds using newer glib already use the new function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The commands only work for users who are members of the project and thus
can set flags themselves.
For non-members they are ignored, so there's isn't much value in having
it here.
Additionally in my recent upstream issue triage I've changed some of the
labels so they were not accurate anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In many cases we move around or rename internal anchors which may break
links leading to the content.
docutils handle the case of links inside a document, but we are lacking
the same form of checking between documents.
Introduce a script which cross-checks all the anchors and links in HTML
output files and prints problems and use it as a test case for the
'docs' directory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The link was most likely broken when 'formatsecret' was converted to
RST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When uri.html was converted to RST the 'URI remote' anchor was not fixed
in remote.rst.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most of the links were broken by moving the article into kbase, but in
this case we need to also fix the anchor names.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Certain links were missing the '../' prefix to reach files in the parent
directory from the time the page was introduced.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The links were broken when the documentation was moved into the
'internals' subdirectory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the links work they'd trip up the link validator script which will
be added later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The link was not fixed when the page was moved into 'kbase/'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The links were broken on the initial conversion of formatdomain.html to
RST which didn't faithfully forward port some of the manually added
anchors.
Fix it by pointing to the closest possible heading.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove what seems like links from some headings. This error predates the
conversion to RST where an '<a href' was used instead of '<a id' in the
source document.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some links didn't exit the 'kbase/' directory and 'virDomainBackupEnd'
API never existed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Once we are already using the new anchor format we can create the link
via a local reference.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The role was used to pass through raw HTML to define custom anchor
names. Since all of the document was now converted to use the anchors
generated from headers we can remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
One local reference required rewording of a whole paragraph to make
sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some rewording and rewraping was needed to accomodate the new local
references.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The surrounding paragraph around the only fixed use was rewrapped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The one local link addition prompted rewrapping of the whole paragraph.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All local links were reformulated to make sense with local references.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Two paragraphs containing local links were reformulated and rewrapped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two functions declared in qemu_capspriv.h:
1) virQEMUCapsInitHostCPUModel() which is not used anywhere but
qemu_capabilities.c,
2) virQEMUCapsSetSEVCapabilities() which is my personal favorite
but despite that it's never implemented nor called.
Drop them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
We already allow users to provide TFTP root path in network XML
and not specify any DHCP. This makes sense, because dnsmasq is
not only DHCP server but also TFTP server and users might have
a DHCP server configured on their own, outside of libvirt's
control and want just the TFTP part.
By moving TFTP config generator out of DHCP generator and calling
it for every IPv4 range, users can finally enable just TFTP.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2026765
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Generating configuration file for dnsmasq is done in
networkDnsmasqConfContents() which is this big, self-contained
function. Separate at least DHCP part into its own function for
better readability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In networkDnsmasqConfContents() there's a for() loop which
initializes some variables in its initialization block. This
makes both the loop() statement and variable declaration block
look needlessly ugly. Speaking of variable declaration, also move
some variables which are used only within blocks into their
respective blocks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virDomainObj struct has @pid member where the domain's
hypervisor PID is stored (e.g. QEMU/bhyve/libvirt_lxc/... PID).
However, we are not consistent when it comes to shutoff state.
Initially, because virDomainObjNew() uses g_new0() the @pid is
initialized to 0. But when domain is shut off, some functions set
it to -1 (virBhyveProcessStop, virCHProcessStop, qemuProcessStop,
..).
In other places, the @pid is tested to be 0, on some other places
it's tested for being negative and in the rest for being
positive.
To solve this inconsistency we can stick with either value, -1 or
0. I've chosen the latter as it's safer IMO. For instance if by
mistake we'd kill(vm->pid, SIGTERM) we would kill ourselves
instead of init's process group.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
We currently build cross-arch containers for all three Debian
releases (10, 11, Sid), and do libvirt builds covering each
arch. This is overkill in terms of the number of problems it
identifies. The most important aspect of cross arch builds is
to find problems with 32-bit builds and problems with big
endian builds.
With this in mind the cross arch jobs are altered as follows
- Debian 10
- build the containers by default
- build armv7 (32-bit) & s390x (big endian)
- other arch builds manual
- Debian 11 / Sid
- container builds all optional
- arch builds all optional
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We currently build on Ubuntu 22.04 twice, for GCC and CLang
with santizers turned on. Moving the GCC santizers build
to 20.04 lets us cull one of the 22.04 jobs
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Currently we do native builds on all distros that are covered
by the support matrix. This reduces that such that we mostly
only run builds on the newest (ie bleeding edge non-released)
version and the oldest version. The effect is that cut out
builds on the newest release version. This is acceptable,
because that version is sandwiched between two versions we
do still test, so unlikely to have failures not already
identified by other jobs.
This has the effect of disabling:
- AlmaLinux 8 GCC - still has a CLang build
and CentOS 8 Stream also gives coverage
- Debian 11 - still has a Debian 10 and Sid
build
- Alpine 3.15 - still has a Alpine 3.14 and Edge
build
Ideally Fedora 35 would be disabled too, but we rely on that
for the integration tests.
The Ubuntu jobs will be handled in the next patch.
The containers are still built since this is cheap-ish.
The build jobs can also be triggered manually if desired.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This refreshes the containers bringing in new behaviour when
builds/containers are disabled.
Instead of deleting the job entirely, the job still exists
but is set to be a manual job. It won't affect the pipeline
result, but can be triggered by the developer if they wish
to test a specific scenario.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There are some formatting problems with virDomainInputDefValidate().
Reformat it to our standards. Use this opportunity to move error
messages onto a single line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When cleaning up after stopped domain, one of the things we do is
attempt to clear QoS settings on OVS type interfaces. Well, this
is needless because they were removed just a couple of lines
above. As a result, the attempt fails and a warning is printed
into logs, polluting them needlessly.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/313
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The container jobs are all optional in upstream now, only
running if dockerfile changes were made. Thus any build
jobs which reference the container jobs need to mark their
dependency as optional too.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are some tools that convert hostname to lowercase before
resolving it (e.g. ssh). In a way it makes sense because DNS is
case insensitive and in case of ssh the lowercase version is then
used to find matching record in its config file. However, our NSS
module performs case sensitive comparison, which makes it useless
with ssh. Just consider a machine named FooBar.
Therefore, switch to case insensitive string comparison.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1777873
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
These checks made sense when we were in process of converting code.
Since the definition of the macros has been entirely removed now,
the compiler will already thrown an error. There aren't likely to
be any in-flight patches that would hit this anyone either.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It's a stable distro, so we expect all jobs to succeed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The target is intentionally not added to the integration tests
at this time, because the corresponding VM template is not yet
available on the runner. A later patch will take care of that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Notable changes:
* 'lcitool manifest' now generates GitLab CI rules spread
across a bunch of files;
* container images are built less frequently for the main
repository.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Detected by gcc 11 -Wformat-overflow:
../../src/util/vircgroupv1.c: In function ‘virCgroupV1ValidatePlacement’:
../../src/util/virerror.h:176:5: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
176 | virReportErrorHelper(VIR_FROM_THIS, code, __FILE__, \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
177 | __FUNCTION__, __LINE__, __VA_ARGS__)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../src/util/vircgroupv1.c:411:13: note: in expansion of macro ‘virReportError’
411 | virReportError(VIR_ERR_INTERNAL_ERROR,
| ^~~~~~~~~~~~~~
../../src/util/vircgroupv1.c:412:80: note: format string is defined here
412 | _("Could not find placement for v1 controller %s at %s"),
| ^~
Signed-off-by: Scott Davis <scott.davis@starlab.io>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Detected by gcc 11 -Wformat-overflow:
../../src/qemu/qemu_driver.c: In function ‘qemuDomainBlockJobAbort’:
../../src/util/virerror.h:176:5: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
176 | virReportErrorHelper(VIR_FROM_THIS, code, __FILE__, \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
177 | __FUNCTION__, __LINE__, __VA_ARGS__)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../src/qemu/qemu_driver.c:14475:17: note: in expansion of macro ‘virReportError’
14475 | virReportError(VIR_ERR_OPERATION_FAILED,
| ^~~~~~~~~~~~~~
../../src/qemu/qemu_driver.c:14476:73: note: format string is defined here
14476 | _("block job '%s' failed while pivoting: %s"),
| ^~
Signed-off-by: Scott Davis <scott.davis@starlab.io>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update NEWS.rst with the now added Power10 processor support.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It always points to QEMU driver, which is quite redundant as all
callbacks also get a pointer to a vm object. Let's get the driver
pointer from there instead.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All callers (QMP event handlers) always pass non-NULL vm pointer. Let's
make the parameter mandatory.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allocating and filling qemuProcessEvent structure is a repeated pattern
before all calls to qemuProcessEventSubmit. We can move the allocation
inside this function and let callers pass all arguments directly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In qemu_extdevice.c lives code that handles helper daemons that
are required for some types of devices (e.g. virtiofsd,
vhost-user-gpu, swtpm, etc.). These devices have their own
handling code in separate files, with only a very basic functions
exposed (e.g. for starting/stopping helper process, placing it
into given CGroup, etc.). And these functions all work over a
single instance of device (virDomainVideoDef *, virDomainFSDef *,
etc.), except for TPM handling code which takes virDomainDef *
and iterates over it inside its module.
Remove this oddness and make qemuExtTPM*() functions look closer
to the rest of the code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We have our own implementation of setns() which was introduced in
v1.2.9-rc1~190 and extended afterwards. The reason was that back
in 2014 we were dealing with glibc that in some of its older
versions did not provide the function. Mostly for non-intel
arches. Nevertheless, glibc now offers the function for all
architectures we care about (aarch64 being the freshest
architecture where the function was introduced, in glibc-2.17).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our copy of syntax-check has diverged quite a bit from the
gnulib original, but a lot of the core logic has remained
identical and it would be nice if we could periodically pull
improvements.
To make this manageable, record the gnulib commit our copy is
derived from: this way, the person updating the file will know
the range of gnulib commits that they have to consider.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The MinGW-w64 project has effectively replaced the original
MinGW project, and distributions such as Fedora have been shipping
packages based on the former for years now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The project is developed as part of GNOME these days, and the
old URL redirects to GNOME's GitLab instance.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
GNU netcat was last updated in 2004. These days, most operating
systems will include either the nmap or OpenBSD variant of the
tool.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The website no longer exists and the PDF file can't even be
retrieved via archive.org.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The website is still up, but the software itself was last
updated in 2014.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The website is still up, although the latency is so high that it
could hardly considered usable; the software itself was last
updated in 2015.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't seem to be a current product: there is no proper
website for it, and the most recent installation instructions
I've been able to locate are targeted at RHEL 6.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Basically all files in the repository are already passing the
check, except for syntax-check.mk itself. Fix that, and stop
limiting the files on which the test is performed.
These changes have been generated by running
$ sed -Ei 's/[ '$'\t'']+\\$/ \\/g' $(git grep -El '[ '$'\t'']+\\$')
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All checks are added to the syntax-check suite, and this name is
displayed prominently in the output of 'meson test', so there
really is no need to include the sc_ prefix too.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The makefile is an implementation detail, so point users towards
the proper way of running syntax-check if they happen to call it
directly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Due to the way make works, we are not forced to follow a strict
order in defining rules and variables. In fact _sc_search_regexp,
which is used by all checks, is only defined halfway through the
file.
Shuffle things around so that the things that we need to look at
the most frequently are closer to the top of the file.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's only used in diagnostics, and even there it's not
particularly useful and can make it more difficult to spot the
actual error message.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
_equal is not used anywhere; the rest of the code implements the
syntax-check target, which takes care of figuring out the list of
checks that have been defined and running them, printing the name
of each check along with its execution time.
This was useful when we were using autotools, but these days we
have meson driving the entire build process and each of the
checks is registered as a separate test, which gives us all of
the features described above for free.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of the pattern is no longer relevant, because the files it
was intended to match have been dropped from the repository.
Specifically:
files commit date
------------------ ------------ ----------
*.gif 6cb131e5cb 2022-01-19
*.fig 9ad637c965 2020-07-10
docs/news*.html.in f45735786a 2020-06-02
docs/*.patch 6be034a8c0 2018-08-23
We can also avoid having a fallback value for the pattern: that
made sense when the implementation was coming from gnulib, as
they wouldn't be able to know in advance if the user would need
to provide their own exclude patterns, but that scenario is no
longer relevant to us.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can assume that VC_LIST_ALWAYS_EXCLUDE_REGEX will not be
defined in a way that would catch backup files.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In its current form, the check will not only catch the intended
#include <config.h>
but also stuff like
#include <wireshark/config.h>
#include "qemu_interop_config.h"
#include <meson-config.h>
The last one is problematic, because it's used in config.h itself.
Making the pattern more strict allows us to drop the exception.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The pattern in build-aux/syntax-check.mk is written specifically
so that it won't match itself, which makes having an exception
for the file unnecessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The file src/util/vireventglib.c doesn't contain a main() function
and so it's not even considered by the check.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is one of the standard checks that we have inherited from
gnulib, but it's not applicable to libvirt because we don't want
plain bindtextdomain() to be used: virGettextInitialize() is our
own private API that should be used instead.
The sc_gettext_init check ensures that our private API is used
in all the places where it makes sense, and the sc_bindtextdomain
check was disabled entirely via a blanket exception. Drop it
instead of keeping dead code around.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have virDomainUpdateDeviceFlags() API that allows changing of
some attributes of a device whilst domain is still running (e.g.
setting different QoS, link state change on vNICs). But only very
limited set of attributes can be changed and we have to check
whether user isn't trying to sneak in a change that's not
allowed. Well, in case of a virtio vNIC we forgot to check for
@rss and @rss_hash_report attributes of <driver/>.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2082540
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
As "none" is a legal value represented in the sysfs attribute dev_busid
this patch prevents libvirt from incorrectly reporting an internal error.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Suggested-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the newly added ARG_CAPS_HOST_CPU_MODEL to set which host CPU we
expect the test to use - the test should fail when using a POWER8 host
cpu but complete when using a POWER9 host cpu.
Two new macros were added because we will be adding similar tests in the
near future when adding support for the Power10 chip.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When loading a latest caps for an arch for the first time the following
occurs in testQemuInfoInitArgs():
- the caps file is located. It's not in the cache since it's the first time
it's being read;
- the cachecaps are retrieved using qemuTestParseCapabilitiesArch() and
stored in the capscache;
- FLAG_REAL_CAPS is set and regular flow continues.
Loading the same latest caps for the second time the caps are loaded from the
cache, skipping qemuTestParseCapabilitiesArch(). By skipping this function it
means that it also skips virQEMUCapsLoadCache() and, more relevant to
our case, virQEMUCapsInitHostCPUModel(). This function will use the
current arch and cpuModel settings to write the qemuCaps that are being
stored in the cache. And we're also setting FLAG_REAL_CAPS, meaning that
we won't be updating the qemucaps host model via testUpdateQEMUCaps() as
well.
This has side-effects such as:
- the first time the latest caps for an arch is loaded determines the
cpuModel it'll use during the current qemuxml2argvtest run. For
example, when running all tests, the first time the latest ppc64 caps
are read is on "disk-floppy-pseries" test. Since the current host arch
at this point is x86_64, the cpuModel that will be set for this
capability is "core2duo";
- every other latest arch test will use the same hostCPU as the first
one set since we read it from the cache after the first run.
qemuTestSetHostCPU() makes no difference because we won't update the
host model due to FLAG_REAL_CAPS being set. Using the previous example,
every other latest ppc64 test that will be run will be using the
"core2duo" cpuModel.
Using fake capabilities (e.g. using DO_TEST()) prevents FLAG_REAL_CAPS to
be set, meaning that the cpuModel will be updated using the current
settings the test is being ran due to testUpdateQEMUCaps().
Note that not all latest caps arch tests care about the cpuModel being
set to an unexpected default cpuModel. But some tests will care, e.g.
"pseries-cpu-compat-power9", and changing it from DO_TEST() to
DO_TEST_CAPS_ARCH_LATEST() will make it fail every time the
"disk-floppy-pseries" is being ran first.
One way of fixing it is to rethink all the existing logic, for example
not setting FLAG_REAL_CAPS for latest arch tests. Another way is
presented here. ARGS_CAPS_HOST_CPU_MODEL is a new testQemuInfo arg that
allow us to set any specific host CPU model we want when running latest
arch caps tests. This new arg can then be used when converting existing
DO_TEST() testcases to DO_TEST_CAPS_ARCH_LATEST() that requires a
specific host CPU setting to be successful, which we're going to do in
the next patch with "pseries-cpu-compat-power9".
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Fix identation of virQEMUCapsUpdateHostCPUModel() params.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemuxml2xmltests that have "pseries" in the name now use the
DO_TEST_CAPS_LATEST_ARCH() macro.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
My recent commit v8.3.0-201-gc500955e95 tried to fix a regression which
would cause the function to return success even if virCloseCallbacksSet
failed. But due to a strange code flow in the function introduced an
opposite regression. The function would return NULL on success when
called without VIR_MIGRATE_CHANGE_PROTECTION flag.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add nodedev schema parsing and format tests for the optional new device
address on the css devices.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the new introduced sysfs attribute dev_busid which provides the address
of the device in the subchannel independent from the bound device driver.
It is added if available in the sysfs as optional channel_dev_addr element into
the css device capabilty providing the ccw deivce address attributes cssid,
ssid and devno.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor out nodedev ccw address schema for easy reuse later.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move ccw device address XML parsing into new method for later reuse.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add virCCWDeviceAddressParseFromString and use it in nodedev udev.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Adjust method name virDomainDeviceCCWAddressParseXML to
virCCWDeviceAddressParseXML.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor virDomainDeviceCCWAddressEqual into virccw and rename method as
virCCWDeviceAddressEqual.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor virDomainDeviceCCWAddressIsValid into virccw and rename method
as virCCWDeviceAddressIsValid.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor virDomainCCWAddressIncrement into virccw and rename method as
virCCWDeviceAddressIncrement.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move virDomainCCWAddressAsString into virccw and rename method as
virCCWDeviceAddressAsString.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor ccw data structure virDomainDeviceCCWAddress into util virccw.h
and rename it as virCCWDeviceAddress.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When a SIGHUP is received a thread is spawned that runs
virStateReload(). However, if SIGINT is received while the former
thread is still running then we may get into problematic
situation: the cleanup code in main() sees drivers initialized
and thus calls virStateCleanup(). So now we have two threads, one
running virStateReload() the other virStateCleanup(). In this
situation it's very likely that a race condition occurs and
either of threads causes SIGSEGV.
To fix this, unmark drivers as initialized in the
virStateReload() thread for the time the function runs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2075837
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This is something that certainly made sense in the context of
gnulib, but we don't have a use for it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have dropped prefixes from the file, it no longer
needs to go through configure_file() and we can use it directly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 8beb7fdd0e changed the handling of POTFILES so that it
could cope with files being located in either the source or build
directory: it did so by adding @SRCDIR@ and @BUILDDIR@
respectively at the beginning of each line, and then converting
them back to the actual values when generating POTFILES from
POTFILES.in.
Later, commit c6a0d3ff8b started passing --directory to
xgettext, which resulted in the tool being able to locate files
regardless of whether they are in the source or build directory.
However, @SRCDIR@ and @BUILDDIR@ were still added to POTFILES.in
only to be stripped when generating POTFILES.
Simplify things by not storing information that we know we're
going to discard later.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Due to a bug in meson versions earlier than 0.60, the
--add-comments that's part of the 'glib' preset and the
--add-comments=TRANSLATORS: that we add ourselves might be
passed to xgettext in the wrong order, resulting in a bunch of
comments that we don't care about being added to the potfile.
Most of the options included in the 'glib' preset are not
applicable to libvirt anyway, so just stop using the preset and
pass a few extra options explicitly instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These managed to sneak in as part of ec02f5719a, when the
potfile was last refreshed, but are not supposed to be there.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit v8.3.0-152-g49ef0f95c6 removed explicit VIR_FREE from
qemuMigrationBegin, effectively reverting v1.2.14-57-g77ddd0bba2
The xml variable was used to hold the return value and thus had to be
unset when an error happened after xml was already non-NULL. Such code
may be quite confusing though and we usually avoid it by not storing
anything to a return variable until everything succeeded.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This fixes a blank screen when viewing a VM with virtio graphics and
gl-accelerated Spice display on Ubuntu 22.04 / libvirt 8.0.0 / qemu 6.2.
Without these AppArmor permissions, the libvirt error log contains
repetitions of:
qemu_spice_gl_scanout_texture: failed to get fd for texture
This appears to be similar to this GNOME Boxes issue:
https://gitlab.gnome.org/GNOME/gnome-boxes/-/issues/586
Fixes: https://launchpad.net/bugs/1972075
Signed-off-by: Max Goodhart <c@chromakode.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
If the port allocator bitmap does not have enough bits to keep the state
of the port we're going to release, the port is not reserved and thus is
trivially released without doing anything. No need to report an error in
such case.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The USB device redirection works in a similar way as Spice. The
underlying 'dbus' channel is set to "org.qemu.usbredir" by default for
the client to identify the channel purpose (as specified in -display
dbus documentation).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Like a Spice port, a dbus serial must specify an associated channel name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This implementation reports only Unix bus address using the URI format
proposed in https://gitlab.freedesktop.org/dbus/dbus/-/issues/348.
We prefer a URI form over the D-Bus address form, since all other
display protocols use a URI, allowing to distinguish between protocols
and making client implementation simpler.
Other transports (for example TCP) are not yet handled.
The client is assumed to know what to lookup on the bus (the bus name,
path & interface of the VM, eventually matching its UUID)
P2P mode doesn't report any available URI.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By default, libvirt will start a private bus and tell QEMU to connect to
it. Instead, a D-Bus "address" to connect to can be specified, or the
p2p mode enabled.
D-Bus display works best with GL & a rendernode, which can be specified
with <gl> child element.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Start the daemon if necessary (it is already stopped in qemuProcessStop)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The remoteOpenConn() function was refactored recently. As a part
of that new variable @newconn was introduced which holds
virConnect object as it's being gradually constructed throughout
the function. At the very end, when everything succeeded the
variable is stolen into passed @conn. However, there was one
line missed in the refactor which still access the @conn instead
of @newconn leading to a NULL dereference.
Fixes: f7c422993e
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use a temporary variable 'newconn' to hold the newly opened connection
until we are ready to pass it back instead of the original connection.
This way we can avoid complicated 'error'/'cleanup' sections.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Refactor the code to use virTypedParamList which simplifies cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The 'identparams' typed parameter list obtained from
virIdentityGetParameters is leaked when called from
'virGetConnectGeneric'.
Use 'virTypedParamListFromParams' to absorb it into a virTypedParamList
which can be autofreed.
Note that the memleak is observable only when running in split-daemon
mode.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/314
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The helper constructs a virTypedParamList from loose params.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Remove the argument from the function prototypes and the callback
handler.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Access the 'driver' struct from the private data rather than the passed
opaque pointer in preparation to remove the opaque pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Access the 'driver' struct from the private data rather than the passed
opaque pointer in preparation to remove the opaque pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Access the 'driver' struct from the private data rather than the passed
opaque pointer in preparation to remove the opaque pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Access the 'driver' struct from the private data rather than the passed
opaque pointer in preparation to remove the opaque pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the qemu driver if we store the immutable driver pointer in
the VM private data struct we don't have to questionably pass it through
opaque pointers to callbacks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the qemu driver if we store the immutable driver pointer in
the VM private data struct we don't have to questionably pass it through
opaque pointers to callbacks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The returned value is used to unlock the object, so all callers must
necessarily make use of the returned value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When dealing with fdsets only we don't need to pass the FD first as we
now generate fdset name directly. Also there are no more caveats in
passing multiple FDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the 'direct' mode was separated and thus we don't have any
possible error case we can stop returning any values and simplify
callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This finishes the separation of the fdset and direct helpers. Remove
'qemuFDPassNewDirect' and all internals which were applicable only in
direct mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The callers adding the FDs are validating them regardless so this check
was redundant.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unix socket chardevs with FD passing need to use the direct mode so we
need to convert it to use qemuFDPassDirect.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally I envisioned a common set of APIs for both FD passing
approaches but it turns out they are not really compatible enough for it
to make sense to use one set of APIs.
As of such introduce a distinct set of APIs for the 'direct' mode, which
will later be used to convert all places that currently use
'qemuFDPassNewDirect' and later clean up the existing APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the internal documentation about qemu threading to the knowledge
base.
The conversion included rstizing of the text document, mainly just
fixing of the headline and enclosing function names and code examples
into code block sections.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The commandline generated from our XML->native convertor is the majority
of cases not usable without libvirt anyways and the situation will not
improve any more.
As of such there's no much utility of avoiding the use of stopped CPUs
flag in such case.
Remove the QEMU_BUILD_COMMAND_LINE_CPUS_RUNNING flag and the associated
logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that we store the state of the host FIPS mode setting in the qemu
driver object, we don't need to outsource the logic into
'qemuCheckFips'.
Additionally since we no longer support very old qemu's which would not
yet have --enable-fips we can drop the part of the comment about very
old qemus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Automatically free the 'vm' temporary domain object and remove the
'cleanup' label and 'ret' helper variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Improve the debug log inside 'qemuBuildCommandLine' to include the name
from the definition and remove useless data such as the pointer to the
qemuDriver object or qemuCaps.
Additionally remove the non-specific debug statements:
VIR_DEBUG("Building emulator command line");
from the two callers of qemuBuildCommandLine.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Rather than re-query all the time we can cache the state of FIPS of the
host as it will not change during the runtime of the guest.
Introduce a 'hostFips' flag to 'virQEMUDriver' and move the code
checking the state from 'qemuCheckFips' to 'qemuStateInitialize' and
also populate 'hostFips' in qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce 'qemuBuildCommandLineFlags' and use it instead of specific
flag booleans.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We already format a commandline using FD passing for the tap devices so
formatting the 'vhost' file descriptors won't make it any less usable
directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In the qemu driver certain configs such as disk throttling or CPU
hotplug is configured by interacting with the monitor at the startup
phase of the hypervisor and thus is not part of the "native config".
Add a paragraph into the documentation outlining that the native
configuration might not be completely usable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In the qemu driver certain configs such as disk throttling or CPU
hotplug is configured by interacting with the monitor at the startup
phase of the hypervisor and thus is not part of the "native config" as
returned by 'virConnectDomainXMLToNative'.
Similarly at least the commandline for qemu contains resources passed
via file descriptors which are obviously not part of the returned
"native config".
Add a paragraph into the documentation outlining that the native
configuration might not be completely usable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add support for the mode and add the corresponding qemuxml2argv test
case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'absolute' clock offset type has a 'start' attribute which is an
unix epoch timestamp to which the hardware clock is always set at start
of the VM.
This is useful if some VM needs to be kept set to an arbitrary time for
e.g. testing or working around broken software.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The last use of this function was removed in commit 6d161bcc, so the
function is no longer used except as an internal implementation for
virCommandPassFD().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We have to always store the state of the feature in the
virDomainDef struct, otherwise
<smm state='off'/>
will incorrectly be interpreted as if the <smm> element was not
present.
Fixes: eeb94215b0
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This complements the existing smm=on tests. Looking at the output
files, one can immediately see how this case is currently not being
handled correctly. We're going to fix that in the next commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use DO_TEST_CAPS_LATEST() instead of hardcoding capabilities and
add the xml2xml part, which was missing; finally, rename it to
accomodate the complementary smm=off test that we're about to
introduce.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
None of the callers now uses the slirp fd passing feature, so it can be
removed.
At this point even the VIR_DEBUG doesn't make sense as it would only log
the pointer of 'props'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't need 'slirpfdName' and 'slirpfd'. The 'slirp' local can be
removed too as qemuSlirpStart is safe to be called if there's nothing to
do.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Populate the 'slirpfd' qemuFDPass structure inside the private data for
passing the fd to qemu rather than using out-of-band variables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'driver' can be taken from the private data of 'vm' and 'slirp' can
be taken from private data of 'net', both of which we need anyways.
Additionally by checking whether slirp needs to be started inside the
function we don't need to do this logic in the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both callers populate the variable when qemuInterfacePrepareSlirp
returned 1. We can save the hassle in the callers by just doing it right
away.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new infrastructure which stores the fds inside 'qemuFDPass'
objects in the private data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All callers now pass NULL/0 as arguments for vhostfd passing so we can
remove all the associated code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new infrastructure which stores the fds inside 'qemuFDPass'
objects in the private data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All callers effectively pass 'net->driver.virtio.queues'. In case of the
code in 'qemu_hotplug.c' this value was set to '1' if it was 0 before.
Since 'qemuBuildNicDevProps' only uses it if it's greater than 1 we can
remove all the extra complexity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add alternative code paths for passing of the FDs using the new
infrastructure. This way we'll be able to refactor the code
incrementally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the 'qemuFDPass' code was refactored we no longer need to hand off
the FD to qemu before we know the path for it.
Thus the call to qemuBuildHostNetProps can be moved outside of the
monitor critical section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pre-construct the array the same way for the case when there's only one
FD and when there are multiple. We just change the argument name
depending on the count.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the block guarded by 'is_tap' boolean to the only place where
'is_tap' is set to true.
This causes few arguments to change places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the setup of the 'vdpa' netdev into the new helper shared between
commandline and hotplug code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The helper will aggregate code that is used to connect the network
backend to the corresponding host portion.
This will be used to refactor the duplicated code between the cold-start
and hotplug helper functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prepare for the upcoming refactor to use qemuFDPass for all the network
related file descriptors:
- tapfds
- vhostfds
- slirp
- vdpa
This patch adds the private data variables and a utility function to
clear it. Clearing is useful since we don't really need the data once
the VM is running so we save some memory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the FDs are closed right after use to prevent leaks, at certain
point we don't need the whole helper any more. Clear them for char
devices after hotplug and on start.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we use our own fdset ID when hot-adding a fdset we can vastly
simplify our internals.
As a stop-gap when a fdset would be added behind libvirt's back we'll
validated that the fdset to be added is not yet used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While 'add-fd' qmp command gives the possibility to find an unused fdset
ID when hot-adding fdsets, such usage is extremely inconvenient.
This patch allows us to track the used fdset id so that we can avoid the
need to check results and thus employ simpler code flow when hot-adding
devices which use FD passing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code didn't check that the reply value is an array and that the
'fds' array is present. This could lead to a crash if qemu wouldn't
return an array in those places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirt doesn't use the returned value and in fact there's nothing we
could even do with them. Avoid parsing and storing them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We use the qemuFDPass infrastructure when building the command line,
refactor the monitor too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's effectively replaced by checks in qemuFDPassTransfer. This will
simplify cleanup paths on constructing the qemuFDPass object when FDs
are being handled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add validation to the transfer step to make the adding step more simple
for easier cleanup paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add possibility to delay checks to the point when the FDs are to be
passed to qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add these XML formats validation in manpage or script:
cpu, domainbackup, domaincaps, domaincheckpoint, networkport,
storagepoolcaps.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Calling virDomainRestoreFlags() with no typed params results in
an error in open() because it tries to open a NULL path.
Obviously, this is wrong and path to restore from must be
provided, at least for now until other sources of restore are
introduced. Then this limitation can be relaxed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When no VIR_DOMAIN_SAVE_PARAM_FILE typed param is set when
calling virDomainSaveParams() then in turn virQEMUFileOpenAs()
tries to open a NULL path.
We have two options now:
1) require the typed param, which in turn may be promoted to a
regular argument, or
2) use this opportunity to make the API behave like
virDomainManagedSave() and use typed params to pass extra
arguments, instead of having to invent new managed save API
with typed params.
Let's go with option 2, as it is more future proof.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The code that actually does managed save within
qemuDomainManagedSave() is going to be reused shortly. Move it
out into a separate helper.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The qemu-vdagent channel is introduced since:
"05b09f039e conf: add qemu-vdagent channel"
It will be in the version 8.4.0.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The qemuDomainManagedSavePath() function does no more than a
g_strdup_printf() and as such can't return NULL really.
Therefore, don't check for its return value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Every running QEMU process we are willing to reconnect (i.e., at least
3.1.0) supports migration events and we can assume the capability is
already enabled since last time libvirt daemon connected to its monitor.
Well, it's not guaranteed though. If libvirt 1.2.17 or older was used to
start QEMU 3.1.0 or newer, migration events would not be enabled. And if
the user decides to upgrade libvirt from 1.2.17 to 8.4.0 while the QEMU
process is still running, they would not be able to migrate the domain
because of disabled migration events. I think we do not really need to
worry about this scenario as libvirt 1.2.17 is 7 years old while QEMU
3.1.0 was released only 3.5 years ago. Thus a chance someone would be
running such configuration should be fairly small and a combination with
upgrading 1.2.17 to 8.4.0 (or newer) with running domains should get it
pretty much to zero. The issue would disappear ff the ancient libvirt is
first upgraded to something older than 8.4.0 and then to the current
libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All QEMU versions we care about support migration events and we should
be able to enable the associated capability when connecting to the
monitor. Failure to do so is thus considered fatal now.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The code was a bit too complicated, especially after removing the check
for QEMU_CAPS_MIGRATION_EVENT.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All QEMU versions we care about already support migration events.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
YAML anchors don't work with Shell condition structures, so we cannot
simply reference the QEMU build template YAML anchor conditionally and
hence have everything as part of a single job template.
Instead, we have to "subclass" the .integration_tests template and
inject the QEMU building bits explicitly.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This was heavily inspired by QEMU's upstream CI buildtest-template.yml.
Rather than referencing QEMU's template directly (which GitLab can do),
this patch resorts to hard-coding the build steps ourselves, solely
because there's no guarantee QEMU will keep either the template file
name or the template name from which the build steps were mostly copied
from.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There's quite a lot happening in the .integration_tests template
already even without adding upstream QEMU build into the mix.
Let's break the template into more pieces which can then reference
in the .integration_tests template when putting all the pieces back
together using YAML anchors.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Future patches will do more code extraction from the existing template
using YAML anchors so it'd be better that the templates would live
separately from job definitions.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A few commits ago new APIs were introduced (virDomainSaveParams()
and virDomainRestoreParams()) and with them new typed parameters:
VIR_SAVE_PARAM_FILE and VIR_SAVE_PARAM_DXML. But their name does
not suggest they apply to either of the APIs nor that they are
intended for domain related APIs. Switch to
VIR_DOMAIN_SAVE_PARAM prefix to make it obvious.
It's true we already have VIR_DOMAIN_SAVE_* symbols which are
part of virDomainSaveRestoreFlags enum, therefore stick also with
'_PARAM_ ' part of the name to differentiate the two.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For most of them qemu errors out with unclear message, and for the
audiodev qemu just falls back to timer-based audio with a warning
message, and will possibly also error out in the future.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2035163
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It will be used in future patch in multiple places.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Everything spice is not supported (and does not make sense) without spice
graphics. For some tests I also added cirrus VGA capability so that the XML
stays simple and libvirt can guess a default video model rather than adding too
much of an irrelevant XML into the individual tests.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This old test was added by me to allow people to keep the spicevmc
channel while changing graphics type from spice to something else.
However we do not do this in other places and also now we have all the
Validate functions so it is better to show the user they will not have
the spicevmc channel available rather than simply not formatting it on
the qemu command line.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After previous cleanup the 'error' label in
qemuDomainObjPrivateXMLParse() contains nothing but a return
statement. Well, the label can be dropped and all 'goto'-s can be
replaced with the return statement directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The qemuDomainObjPrivateXMLParse() is responsible for parsing
given XML into qemuDomainObjPrivate struct. As it does so, memory
might be allocated for some members. If an error occurs during
parsing the control jumps onto 'error' label where only some of
previously allocated memory is freed. The reason there's no
memory leak is simple: the only caller (virDomainObjParseXML())
unrefs freshly created virDomainObj which in turn causes
qemuDomainObjPrivateFree() to be called. Therefore, these
partial, selective frees are needless and should be just dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that qemuDomainObjPrivate struct gained new member format it
into XML and parse it so that the value is preserved across
daemon restarts.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since v1.3.0-90-gafbe1d4c56 the original value of memlock limit
is stored inside virDomainObj struct directly (under
originalMemlock member). This is needless because the value is
used only inside QEMU driver and thus can reside in
qemuDomainObjPrivate struct.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add the ability to configure a qemu-vdagent in guest domains. This
device is similar to the spice vdagent channel except that qemu handles
the spice-vdagent protocol messages itself rather than routing them over
a spice protocol channel.
The qemu-vdagent device has two notable configuration options which
determine whether qemu will handle particular vdagent features:
'clipboard' and 'mouse'.
The 'clipboard' option allows qemu to synchronize its internal clipboard
manager with the guest clipboard, which enables client<->guest clipboard
synchronization for non-spice guests such as vnc.
The 'mouse' option allows absolute mouse positioning to be sent over the
vdagent channel rather than using a usb or virtio tablet device.
Sample configuration:
<channel type='qemu-vdagent'>
<target type='virtio' name='com.redhat.spice.0'/>
<source>
<clipboard copypaste='yes'/>
<mouse mode='client'/>
</source>
</channel>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This enumeration will be useful for vnc with the upcoming qemu-vdagent
device so make the name more generic.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Detect whether qemu supports the qemu-vdagent character device. This
enables support for copy/paste with VNC graphics.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Notable schema changes:
- 'cluster-id' is now reported for CPU topology
- 'display-update' QMP command added
- 'main-loop' QOM object added with a whole set of properties
- 'cpu0-id' field reported in SEV data
- 'blockdev-change-medium' command now has 'force' property
- 'screendump' QMP command now has a 'format' property
- supported formats are 'ppm' and 'png'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Validate the domain configuration to ensure that if there are more than
one vgpu assigned to a domain, only one of them has 'ramfb' enabled.
This was never a supported configuration. QEMU failed confusingly when
attempting to start a domain with this configuration. This change
attempts to provide better information about the error.
https://bugzilla.redhat.com/show_bug.cgi?id=2079760
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There's no real difference between
qemuSecurityStartVhostUserGPU() and qemuSecurityCommandRun(). The
latter is used more frequently while the former has just one
user. Therefore, drop the less frequently used one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are no major changes since 7.0.0-rc2, but a few additional
features are enabled in this build.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The parameters of self.warning is inconsistent with its definition, So
fix it.
Signed-off-by: luzhipeng <luzhipeng@cestc.cn>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
While we don't want to aim for the shortest list of disabled features in
the baseline result (it would select a very old model), we want to do so
while looking at any of the input models for which we're trying to
compute a baseline CPU model. Given a set of input models, we always
want to take the least capable one of them (i.e., the one with shortest
list of disabled features) or a better model which is not one of the
input models.
So when considering an input model, we just check whether its list of
disabled features is shorter than the currently best one. When looking
at other models we check both enabled and disabled features while
penalizing disabled features as implemented by the previous patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For finding the best matching CPU model for a given set of features
while we don't know the CPU signature (i.e., when computing a baseline
CPU model) we've been using a "shortest list of features" heuristics.
This works well if new CPU models are supersets of older models, but
that's not always the case. As a result it may actually select a new CPU
model as a baseline while removing some features from it to make it
compatible with older models. This is in general worse than using an old
CPU model with a bunch of added features as a guest OS or apps may crash
when using features that were disabled.
On the other hand we don't want to end up with a very old model which
would guarantee no disabled features as it could stop a guest OS or apps
from using some features provided by the CPU because they would not
expect them on such an old CPU.
This patch changes the heuristics to something in between. Enabled and
disabled features are counted separately so that a CPU model requiring
some features to be disabled looks worse than a model with fewer
disabled features even if its complete list of features is longer. The
penalty given for each additional disabled feature gets bigger to make
longer list of disabled features look even worse.
https://bugzilla.redhat.com/show_bug.cgi?id=1851227
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It will become more complicated and so it deserves to be separated into
a new function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Checking the signature in two different places makes no sense since the
code in between can only mark the candidate as the best option so far,
which is what the second signature match does as well.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These ancient RHEL-only CPU models should not really be used by any CPU
definition created by libvirt. We keep them just for backwards
compatibility with domains which might still be using them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
in preparation for the addition of DomainRestoreParams,
add it to the list of methods requiring a conn first argument.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
add new API in order to be able to extend parameters to the domain
restore operation. We will use it to fit the existing arguments of
VirDomainRestoreFlags for now.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
create an alternative to virDomainSaveFlags that is more
extendible via parameters.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
where it can be reused by other helpers.
No changes other than the move.
Note that this makes iohelper now dependent on -lutil and -lacl.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
this is in preparation for a minor refactoring of the copy
function itself out of runIO().
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Using an updated toolchain means we're likely to catch more
issues.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As of 47503cc859 we are statically linking libtest_utils_qemu.a
into qemuhotplugmock.so (see the original commit for reasoning).
However, this breaks ASAN on older clang because now
qemuhotplugtest has two instances of virCPUDef global variables
(cpuDefault, cpuHaswell, cpuPower8, cpuPower9). One that comes
from the binary itself (which also links with
libtest_utils_qemu.a) and the other from the mock. Resolve this
by making the variables static and introducing getter and setter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As of 47503cc859 we are statically linking libtest_utils.a into
qemuhotplugmock.so (see the original commit for reasoning).
However, this breaks ASAN on older clang because now
qemuhotplugtest has two instances of virTestHostArch global
variable. One that comes from the binary itself (which also links
with libtest_utils.a) and the other from the mock. Resolve this
by making the variable static and introducing getter and setter.
Well, the former already exists (as virArchFromHost()) so only
the latter is needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Notable changes:
* use the most recent point release for FreeBSD 12.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was originally introduced in c2fb8bfee3, reportedly to
support symbol versioning on Solaris; more recently, 30b301c6ea
ported it to meson.
Up until the previous commit this has resulted in passing
-M .../libvirt/build/src/libvirt.syms
to the linker on macOS, but the implementation of the -M option
on that platform's linker is literally
else if ( strcmp(arg, "-M") == 0 ) {
// FIX FIX
}
so in practice we've been providing an additional input file,
which the linker understandably ignores after printing a warning
since it's not in any format that it recognizes.
Considering that LLVM's linker, which is now used by default on
FreeBSD, supports the same --version-script option as the GNU
linker, that we have introduced special handling for macOS, and
that we don't target Solaris, we can simply drop the branch at
this point.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
macOS libraries don't support symbol versioning, so the only
result that we achieve by passing additional flags to the linker
is a bunch of messages like
ld: warning: ignoring file .../libvirt/build/src/libvirt.syms,
building for macOS-x86_64 but attempting to link with file built
for unknown-unsupported file format ( 0x23 0x20 0x57 0x41 ... )
being produced during the build.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This ensures variable names and the overall structure of the
code setting and using them is consistent. It will also make
upcoming changes less disruptive.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When constructing mock_libs array it is firstly initialized to a
static set of mocks followed by couple of WITH_* checks to append
driver specific mocks. These checks are then repeated when
filling some other variables (e.g. supplementary helpers,
libraries, tests, etc.). Dissolve the former in the latter since
we are already doing that, partially, for qemu (qemucapsprobemock
and qemuhotplugmock)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As of ad81aa8ad0 the qemuhotplugmock.c calls
testQemuPrepareHostBackendChardevOne() which is implemented in
testutilsqemu.c. However, the mock is not linked with
testutilsqemu static library which makes some tools (valgrind
particularly) unhappy because the resulting mock library has
unresolved symbol.
The fix is simple, link mock library with test_utils_qemu_lib and
also with test_utils_lib since testutils.c calls some functions
from testutils.c.
Since these two libraries are declared only after mock_libs[], I
had to move the line that declares qemuhotplugmock after those
two.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the past, we did set VLAN tag on <interface type='direct'/>.
However, during rewrite (v8.1.0-rc1~191) virNetDevSetVfConfig()
was changed and a condition that was responsible for calling
a function that sets VLAN tag was changed accidentally resulting
in VLAN tag not being set anymore.
However, because of other changes in the same patchset, it may
happen that @adminMac is NULL (this is to work around yet another
broken SRIOV driver), and thus we must refrain from setting MAC
and have to set VLAN tag only.
Fixes: 73961771a1
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2075383
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If virNetDevSetVfMac() is called with either @macaddr or
@allowRetry arguments NULL an error is reported, because this is
considered invalid use. However, the error message is not
informative as it could be.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It allows libvirt to provide the value of cpu0-id retuned by the Qemu QMP
command query-sev-capabilities as implemented by the Qemu Patch [1] which
is merged to Qemu master branch and should be available with Qemu 7.1.
This is used to get the signed Chip Endorsement Key (CEK) of the CPU of AMD
system from AMD's Key Distribution Service (KDS).
Similar to cbitpos, reducedPhysBits, maxGuests & maxESGuests;
the value of cpu0-id is also provided using 'virsh domcapability'.
[1] https://lore.kernel.org/all/20220228093014.882288-1-dovmurik@linux.ibm.com/
Signed-off-by: Niteesh Dubey <niteesh@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This makes it mandatory to *not* add 'v' to version numbers.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We do not need VIR_DOMAIN_VIRT_QEMU to get qemu default
version. With the 'os_type' and 'arch'in capabilities,
we could identify 'emulator' which is enough to get the version.
Actually VIR_DOMAIN_VIRT_QEMU is not the only domain virt type for
qemu driver, there are VIR_DOMAIN_VIRT_KVM and VIR_DOMAIN_VIRT_HVF.
If TCG is disabled in qemu, it will cause the error that could not
find suitable emulater when access version.
Signed-off-by: Liang Yan <lyan@digtalocean.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On macOS when BROKEN_POLL is set in GLib, our tests will periodically
trigger a warning:
(process:50880): GLib-WARNING **: 02:54:15.272: poll(2) failed due to: Bad file descriptor.
Our code is inherantly racy, calling g_source_destroy which
removes the FD from the event thread poll asynchronously but
we close the FD immediately after g_source_destroy returns.
With poll() this results in POLLNVAL which we're ignoring, but
with select() it generates the BADF error on macOS.
We need to ignore the warnings on macOS to avoid abort()ing
our test programs.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/303
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Mostly the tests should fail cleanly, but sometimes the test might crash
or abort. In this case we'll need to know the stack traces in order to
debug the problem. Fortunately on the Cirrus CI macOS instances, the
crash reporting service is active and saving crashes to the directory
~/Library/Logs/DiagnosticReports/
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
These two pointers can never be NULL since they are initialised to a reference
of a struct. This became apparent when commit 210a195394 added a VIR_DEBUG
which used both pointers because due to the concise condition the compiler saw
that if the "and" part of the condition did short-circuit (and it assumed that
can happen) the second variable would not be initialised, but it is used in the
debugging message, so the build failed with:
In file included from ../src/cpu/cpu_x86.c:27:
../src/cpu/cpu_x86.c: In function ‘virCPUx86DataIsIdentical’:
../src/util/virlog.h:79:5: error: ‘bdata’ may be used uninitialized in this
function [-Werror=maybe-uninitialized]
Fix this by just assigning the helper pointers and remove the condition
altogether.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
scripts/apibuild.py did not consider exporting external variable's
comments into the XML API. This commits fixes that.
Noe that the way that CParser is designed, it is currently possible to
lose a parsed comment when parsing other fields as self.comment in
several places. I've added a comment to highlight this.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
So we can use for comments that are being hold in helper variables.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This patch adds 'version' parameter to generated XML API for functions
and functypes.
The 'version' metadata has been added with e0e0bf6628 by parsing .syms
files. This commit does not override that but it will warn if there is
not 'Since' metadata with new additions.
There is not clear benefit for keeping both. For now, I've added a
warning in case there is a mismatch between the version provided by
.syms and docstring.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This patch adds 'version' parameter to the generated XML API for
macros
It'll require, for new additions, to add a comment with the version
that the macro was added. An example bellow of code diff and
the change in the generated XML.
Note that the Since tag is removed from the comment as there is a
proper field for it in the XML.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This patch adds 'version' parameter to the generated XML API for
typedefs
It'll require, for new additions, to add a comment with the version
that the typedef value was added. An example bellow of code diff and
the change in the generated XML.
Note that the Since tag is removed from the comment as there is a
proper field for it in the XML.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Removed the TODO as we can rely to the serialize_typedef() the job to
report missing comments.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This patch adds 'version' parameter to the generated XML API for
enums.
It'll require, for new additions, to add a comment with the version
that the enum value was added.
Note that the Since tag is removed from the comment as there is a
proper field for it in the XML.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It belongs to the comment for VIR_DOMAIN_AFFECT_CONFIG, not to
the unrelated one immediately after it.
Fixes: 807cdbf759
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We don't have access to the 'testlog.txt' file, so we need meson to
print the failures for any broken tests directly.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given function was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given function was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given typedef was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given macro was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given enum value was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given enum value was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Follow up patch will add Since metadata to enum values of
virStorageVolWipeAlgorithm.
This patch is necessary to avoid breaking the build with
syntax-check.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
scripts/apibuild.py does not handle well enum's with comments between
values. The outcome depends on whether the enum value has its own
docstring or not and if there is spaces between the enum values or
not.
This commit removes some generic comments that I have spotted.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Few minor changes in qemu since the last update:
- 'cocoa' display and corresponding props (not present in this build)
Changes in build:
- dbus display driver re-enabled
- gtk display support re-disabled
- xen support re-disabled
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
AMD cpus report Core (compute unit) identifiers of the cpu running the
instruction under leaf 0x8000001e. This data is not needed for libvirt
and actually breaks caching of the qemu capabilities where we check that
all of the CPU flags to be identical.
Mask out all of leaf 0x8000001e.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Raise the lower bound to '64' as that seems to currently be the first
size that can fit the CPU data for a modern cpu.
Lower the upper bound to an arbitrary 65536. So many cpu features ougth
to be enough for everyone.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case when the 'KVM_GET_SUPPORTED_CPUID' ioctl on /dev/kvm would
fail for other reason than the documented E2BIG, our code would continue
looping and calling it while always increasing the memory buffer even
when that will not help.
Rewrite the function to allow another iteration only with the correct
errno.
Additionally rename the 'i' variable to 'alloc_size' as it's not a pure
iterator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the filtering code into virHostCPUGetCPUIDFilterVolatile.
This also removes a safe but very questionable reuse of 'i' iterator in
the both the top level and nested loop. It's safe for now as the to
level loop will not iterate any more in the current state.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The commit adding the code fetching host CPU flags via the
KVM_GET_SUPPORTED_CPUID didn't describe at all why such an alghorithm is
needed.
Add a comment from the documentation outlining how the userspace
function is expected to allocate memory here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function returns 'virCPUData' but doesn't do two important steps
which other code takes:
1) leaves with all-zero data is stripped from the XML output
2) the data is expected to be sorted in the array
Now the 'virHostCPUGetCPUID' helper returns both all 0 leaves and
doesn't order them as we expect.
If this is then used in conjunction with 'virCPUx86DataIsIdentical'
together with data which made a roundtrip to XML and back the result
will be always false even if the data itself is identical.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Without this it's impossible to debug scenarios when this function
returns a mismatch but the formatted data looks identical.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In a recent commit I've attempted to rewrite the XML generator to use
virXMLFormatElement instead of manual steps. Unfortunately the commit
had multiple problems resulting in a garbled XML:
1) in certain cases the wrong buffer was used resulting in misplaced
snippets
2) the child element buffer was improperly set up so sub-elements were
not indented
This resulted in following XML being generated:
$ virsh blockcopy cd vda /tmp/test.copy --raw --print-xml
type='file''/tmp/test.copy'/>
<driver type='raw'/>
<disk>
<source file=</disk>
To fix this we'll generate the '<source>' element in one go and use the
proper buffer for it and other places.
Fixes: 1cd95f858a
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2078274
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Useful for knowing how to construct the XML and debugging.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend the 'disk-cdrom-network' to cover this instance. This also
validates that the parameters of -blockdev conform to the QAPI schema.
Also add the xml2xml variant of this test case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code already handles this so we just need to allow it in the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate it so that further addition can target 'ftp' only.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The iSCSI hostdev code doesn't require the check for the empty drive
and the check for the protocol because those are already guaranteed at
that point.
In qemuDomainSecretStorageSourcePrepare we don't need to check the
network disk type either as it's now guaranteed by the definition
validator.
Thus both callers can simply check whether src->auth is present and the
helper can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we are already checking that the encryption format can be only
_LUKS and _LUKS2 this wrapper function doesn't make much sense any more.
The only one caller can do this internally.
The move of virStorageSourceIsEmpty is correct as there are no secrets
to setup if the disk is empty anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The validation should be the only point to decide whether authentication
is supported for a disk backing protocol. The rest of the code can then
simply always enable it.
This also fixes a crash when authentication is requested e.g. for a HTTP
backed disk as the blockdev props formatter expects that it was already
set up.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Only certain disk protocols support authentication. Add validation for
this field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the impossible error message about the 'qcow2' encryption format
not being supported. We validated before that it can't happen.
Additionally the code can be simplified by removing error handling from
impossible code paths as the last resort is virJSONValueCreate not
allowing NULL argument with the 's:' modifier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reject encryption requests for unsupported image format types.
Add negative test for the rejected cases as well as modify
'disk-network-rbd-encryption' case to validate that with librbd
encryption the format doesn't matter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the two ad-hoc checks below into the block which already tests
whether encryption is requested.
If we first disallow the old-style qcow2 encryption we can remove a
whole block of validation later on.
Also the capability check for qcow2+luks can be simplified by moving it
into the same block.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most of the anchors that were forward ported to formatdomain.rst when it
was converted are not actually referenced by our documentation. Since
it's now quite some time after the conversion was done we can remove
them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modify the gitlab templates linking to it and remove the raw HTML.
Note that also the default template needs to be changed directly in
gitlab.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modify the name of the 'IRC discussion' paragraph to just 'IRC' so that
the links keep working and remove the raw HTML anchors.
Adjustment is needed for documents which were using the '#email' anchor
which has now become '#mailing-lists'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Avoid the table and add a brief description of the transport protocol.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a new heading 'Local hypervisor URIs' and move the sections about
'qemu', 'xen' and 'test' under it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Mention the legacy 'xen' string usage under the Xen hypervisor uri
section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We now have an paragraph about default URI choice if the passed pointer
is NULL. Add the two related bits from the 'NULL and empty string URIs'
from the legacy section to the current one and remove the old stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Adjust links in the process.
Note that the conversion to the table is temporary and upcoming patch
will modify it for better readability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The paragraph talks about lack of fine grained access control which was
already added a long time ago.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When the setup of TLS certs was originally split out of
'docs/remote.html' ( df99aa311a ) links refering to it were not
fixed.
Adjust them to point to the correct document.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The anchor name was not fixed when the 'formatstorage' document was
converted to rst.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There should be no empty lines between a docstring comment and
the symbol it documents.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There should be no empty lines between the Since tag in a
docstring comment and the end marker.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The API xml description file generator doesn't properly handle cases
when there's either a single comment or mixed use of pre- and post-
comments explaining the values.
Modify the comments to avoid the problem and also append version
information for the exposed values.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Similarly to previous commits but with the targeting libvirt-common
in a batch.
Either create or append to existing docstring, the version (git tag)
that a given typedef, enum value, macro or function was introduced
in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given function was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given function was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given typedef was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given typedef was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given macro was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given enum value was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
virConnectAuthPtrDefault is the only variable that we export and
with the documentation being at the C file, it makes harder to find
it.
With this patch, the documentation of this variable can be found by
those who look at the header file for guidance plus, it will also be
included in the XML API, as the followup patch will fix apibuild.py
to store what is documented in the header file for this variable.
Note that the apibuild, does not do the same with .c files. It'd
require adding it for (parsing) recursion, similar to what is done
for functions. Considering the pros/cons, seems more reasonable to
move the docstring to the header file instead.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
scripts/apibuild.py does not handle well enum's with comments
between values. The outcome depends on whether the enum value has
its own docstring or not and if there is spaces between the enum
values or not.
Either way, virConnectListAllNodeDeviceFlags documentation is
explicit that this enum is about filtering node devices. We can move
the information that it is either by "capability" or "active" state
to the block of comment above.
Using git diff --word-diff to show the fixed ouput xml (redacted).
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_ACTIVE' ... [-info='Inactive-]{+info='Active+} devices'/>
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_AP_CARD' ... [-info='vDPA-]{+info='s390 AP Card+} device'/>
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_AP_MATRIX' ... [-Queue'/>-]{+Matrix'/>+}
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_AP_QUEUE' ... [-Card device'/>-]{+Queue'/>+}
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_CCW_DEV' ... [-info='Mediated-]{+info='CCW+} device'/>
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_CSS_DEV' ... [-info='CCW-]{+info='CSS+} device'/>
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_DRM' ... [-info='Capable of scsi_generic'/>-]{+info='DRM device'/>+}
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_FC_HOST' ... [-info='Storage device'/>-]{+info='FC Host Bus Adapter'/>+}
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_MDEV' ... [-info='Capable of mediated devices'/>-]{+info='Mediated device'/>+}
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_MDEV_TYPES' ... [-info='DRM device'/>-]{+info='Capable of mediated devices'/>+}
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_NET' ... [-info='USB interface'/>-]{+info='Network device'/>+}
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_PCI_DEV' ... [-info='System capability'/>-]{+info='PCI device'/>+}
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_SCSI' ... [-Target'/>-]{+device'/>+}
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_SCSI_GENERIC' ... [-vport'/>-]{+scsi_generic'/>+}
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_SCSI_HOST' ... [-info='Network device'/>-]{+info='SCSI Host Bus Adapter'/>+}
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_SCSI_TARGET' ... [-Host Bus Adapter'/>-]{+Target'/>+}
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_STORAGE' ... [-info='SCSI-]{+info='Storage+} device'/>
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_SYSTEM' ... [-info='filter the devices by cap type'/>-]{+info='System capability'/>+}
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_USB_DEV' ... [-info='PCI-]{+info='USB+} device'/>
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_USB_INTERFACE' ... [-device'/>-]{+interface'/>+}
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_VDPA' ... [-info='CSS-]{+info='vDPA+} device'/>
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_VPD' ... [-info='s390 AP Matrix'/>-]{+info='Device with VPD'/>+}
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_CAP_VPORTS' ... [-info='FC Host Bus Adapter'/>-]{+info='Capable of vport'/>+}
<enum name='VIR_CONNECT_LIST_NODE_DEVICES_INACTIVE' ... [-info='Device with VPD filter the devices by active state'/>-]{+info='Inactive devices'/>+}
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is a quite an old (created at 2016) patch fixing an issue for at
that time contemporary Fedora 23. virsh reboot returns success (yet
after hanging for a while), VM is rebooted sucessfully too but then
shutdown from inside guest causes reboot and not shutdown.
VM has agent installed. So virsh reboot first tries to reboot VM thru
the agent. The agent calls 'shutdown -r' command. Typically it returns
instantly but on this distro for some reason it takes time. I did not
investigate the cause but the command waits in dbus client code,
probably waits for reply. The libvirt waits 60s for agent command to
execute and then errors out. Next reboot API falls back to ACPI shutdown
which returns successfully thus the reboot command return success too.
Yet shutdown command in guest eventually successfull and guest is truly
rebooted. So libvirt does not receive SHUTDOWN event and fake reboot
flag which is armed on fallback path stays armed. Thus next shutdown
from guest leads to reboot.
The issue has 100% repro on Fedora 23. On modern distros I can't
reproduce it at all. Shutdown command is asynchronous and returns
immediately even if I start some service that ignores TERM signal and
thus shutdown procedure waits for 90s (if I not mistaken) before sending
KILL.
Yet I guess it is nice to have this patch to be more robust.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nikolay.shirokovskiy@openvz.org>
When <qemu:override> is the only usage of the qemu namespace the entire
section is mistakenly removed. Add check for use count.
Signed-off-by: Justin Gatzen <justin.gatzen@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The point of qemu_processpriv.h file is to allow a small subset
of functions to be called from test suite but not elsewhere. This
is implemented by requiring everybody that includes the file to
define a macro. If not done so, an error is printed at compile
time. However, this error message contains a typo because it
mentions qemu_process_priv.h while the file is called
qemu_processpriv.h.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While parts of QEMU's CGroup code were moved under hypervisor
agnostic location (src/hypervisor/) a typo sneaked in. The
inspiration for virDomainCgroupConnectCgroup() comes from
qemuConnectCgroup(). The former is called upon reconnecting to a
running domain (after daemon restart). While the latter returned
early if the daemon was running unprivileged, the former returns
early if the daemon runs privileged. This is obviously wrong,
because root can set up CGroups.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2075765
Fixes: 788e2b58cb
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The conversion also included a change to the layout of the document.
Specifically the individual 'capabilty' types are now separated under
individual headings rather than part of the original definition list.
This reduces nesting but also esures that proper anchors are generated
automatically.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Additionally hyperlinks in other parts of the documentation are updated
to match.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Original conversion didn't properly convert local links. Fix them by
pointing to the section name. In certain cases this requires
reformulation of the text.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Original conversion didn't properly convert local links. Fix them by
pointing to the section name. In certain cases this requires
reformulation of the text.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Original conversion didn't properly convert local links. Fix them by
pointing to the section name. In certain cases this requires
reformulation of the text.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Original conversion didn't properly convert local links. Fix them by
pointing to the section name. In certain cases this requires
reformulation of the text.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Original conversion didn't properly convert local links. Fix them by
pointing to the section name. In certain cases this requires
reformulation of the text.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Original conversion didn't properly convert local links. Fix them by
pointing to the section name. In certain cases this requires
reformulation of the text.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Original conversion didn't properly convert local links. Fix them by
pointing to the section name. In certain cases this requires
reformulation of the text.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Original conversion didn't properly convert local links. Fix them by
pointing to the section name. In certain cases this requires
reformulation of the text.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Original conversion didn't properly convert local links. Fix them by
pointing to the section name. In certain cases this requires
reformulation of the text.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was supposed to test the behavior when
QEMU_CAPS_MACHINE_PSERIES_MAX_CPU_COMPAT is present, but these
days that's always the case and pseries-cpu-compat already
provides all the coverage we need.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit d73852c499 moved the original QEMU-specific helpers to
the utils module, which resulted in build failures on non-Unix
platforms due to the unconditional use of Unix-only symbols such
as _SC_CLK_TCK.
To deal with that situation, commit d7c64453aa made the helpers
Linux-only and added stubs for other platforms that, when called,
would always fail with ENOSYS.
However the original helpers had been carefully written so that,
while they would only be able to produce useful output on Linux,
they would still succeed on the other Unix platforms where we
build the QEMU driver.
Restore the original behavior so that calling APIs such as
virDomainGetInfo() can once again work on FreeBSD and macOS.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/298
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Sometimes it may come handy to learn what address is a NVDIMM
mapped to inside a guest. While users can provide an address they
want to have NVDIMM mapped to, it's optional. Fortunately, when a
domain is being started we issue the 'query-memory-devices'
monitor command and the reply is the same for 'dimm' and 'nvdimm'
types. Therefore, updating NVDIMM address is trivial.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This gets rid of the goto and prepares the function for automatic
mutex management.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This allows a later patch to replace virObjectLock/Unlock
pairs with automatic mutex management code.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This allows a later patch to replace virObjectLock/Unlock
pairs with automatic mutex management code.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Checking for duplicate / NULL keys beforehand will simplify error
handling in a later patch significantly.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Using the extended definition format is only necessary when
the defaults are not good enough, but that's not the case here.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
All build jobs for the target are explicitly disabled, so
there's no point in keeping the variables file around and we
can simply not mention it in the manifest at all.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
[1] closes gap in virDomainObjListRemove so that concurrent thread can
not step in and obtain the domain while domain is temporary unlocked. But
there is another gap exist:
thread B - executes create API
thread C - executes undefine API
- thread A executes some job on domain
- threads B and C obtains domain from list and wait for job condition
- thread A finishes its job and C grabs job condition, removes domain
from list and finishes
- thread B grabs job condition and start the domain, unfortunately
is not in the list already
[1] commit c7d1c139ca
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Thu Dec 11 11:14:08 2014 +0100
qemu: avoid rare race when undefining domain
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Acquiring job introduced in commit [1] to fix a race described in the
commit. Actually it does not help because we get domain in create API
before acuiring job. Then [2] fixed the race but [1] was not reverted even
it is does not required by [2] to work properly.
[1] commit b629c64e5e
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Thu Oct 30 14:38:35 2014 +0100
qemu: avoid rare race when undefining domain
[2] commit c7d1c139ca
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Thu Dec 11 11:14:08 2014 +0100
qemu: avoid rare race when undefining domain
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
SPICE ports cleanup looks overly complicated. We can just set *reserved
flags whenever port is reserved (auto or non auto).
Also *Reserved flags are not cleared on stop in case of reconnect with
autoport (flags are set on reconnect in qemuProcessGraphicsReservePorts
call). Yeah config is freed in the end of stopping domain but still.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
VNC websocket port cleanup looks a bit repetetive. Let's set websocketReserved
flag whenever we reserve port (auto or not).
Also websocketReserved flag is not cleared on stop in case of reconnect with
auto port (flags is set on reconnect in qemuProcessGraphicsReservePorts
call). Yeah config is freed in the end of stopping domain but still.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Scenario is with two domains with same VNC websocket port.
- start first domain
- start second, it will fail as port is occupied
As a result port will be released which breaks port reservation logic.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Code to release VNC port looks repetitive. The reason is there were
originally 2 functions to release ports - for auto and non-auto cases.
Also portReserved flag is not cleared on stop in case of reconnect with
auto port (flags is set on reconnect in qemuProcessGraphicsReservePorts call).
Yeah config is freed in the end of stopping domain but still.
Let's use this flag whenever we reserve port (auto or not). This makes
things clearer.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Docutils-0.17 switched to using <main> instead of a <div
class='document'> and <section> instead of <div class='section'>.
To ensure that our pages still work we need to slightly adapt our XSL
stylesheet to select the <main> tag properly and adapt the CSS to also
select the 'section' element instead of a class and to apply to a <main>
tag with the appropriate names.
Docutils-0.17 also changed to use 'h2' for section heading instead of
'h1'.
Note the styles applied to the 'main' element with certain id can't be
made more universal by just applying to the id itself, as in certain
cases (e.g. 'documentation') we also have sections with that name. This
was previously ensured by also matching the 'document' class which would
make it equal to the 'main' element.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Select direct 'h1' children of elements named 'knowledge-base' and
'documentation. It's simpler and will also work properly with
docutils-0.17 and later where we don't have a div with class 'document'
wrapping everything.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
While the content is slightly outdated it's still a good primer on how
an API call traverses through the client library and to the remote
driver.
To make the page useful, this commit:
- removes the paragraphs which were intended to serve as a directory
page for the 'internals' subdirectory
- adds a note saying that some facts might not be up to date
- adds linking to this page from the kbase directory page
- adds more monospace formatting around function names
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Note that this document was not referenced from any top level page. This
patch does a straight conversion and leaves it unreferenced.
Next patch will then modify it to serve as an overview (hence the new
name) of how an API call happens.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All documents were now moved away so we don't need this any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Along with the conversion we need to adapt the stylesheets to apply to
the new document similarly to how we do that in the knowledge base.
Note that one visible difference is that now a 'Documentation' heading
is visible on top of the page.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add an 'internals' subfolder to 'docs/kbase' to house all the documents
under internals. The output files are still under 'docs/kbase'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically we had two top level XSL files for top level and nested
documents which only differ in what they pass for 'href_base' to the
main 'page.xsl' file.
We can instead pass the variable as argument from the build system so
that we have just one XSL file and also allow for more nested document
trees in the future.
The '404' page is special even with the current XSL way so we add a
special case for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a separate column of documents regarding internals of libvirt and
move the 'migrationinternals' and 'incrementalbackupinternals' pages
under the new heading.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move validation from virDomainDiskDefIotuneParse into the validation callback.
Signed-off-by: Moteen Shah <codeguy.moteen@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allocate a larger 'data' array than strictly needed
for simplicity and use 'ndata' as the index when
filling it to put the single event at the first unused
place, instead of at its index in the virshDomainEventCallbacks
array.
https://bugzilla.redhat.com/show_bug.cgi?id=2073887
Fixes: c6bb274693
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Under certain circumstances nwfilterStateInitialize could leak memory:
If e.g. the call to virNWFilterConfLayerInit fails, the error path
err_techdrivers_shutdown does not free the previously allocated memory
held in driver->stateDir.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow nwfilterStateCleanupLocked to be called on a partially constructed
driver object.
This enables the next patch to simplify and fix error handling in
nwfilterStateInitialize.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow nwfilterDriverRemoveDBusMatches to be called without
nwfilterDriverInstallDBusMatches being called previously.
This enables a later patch to use nwfilterDriverRemoveDBusMatches
as a cleanup function safely.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virNWFilterDHCPSnoopShutdown would never destroy the mutexes created
in virNWFilterDHCPSnoopInit. Additionally, if in virNWFilterDHCPSnoopInit
the call to virMutexInitRecursive succeeds and the call to virMutexInit
fails, this would lead to either virNWFilterSnoopState.snoopLock being
initialized twice or virNWFilterSnoopState.activeLock destroyed without
being initialized first.
This enables a later patch to use virNWFilterDHCPSnoopShutdown as a
cleanup function safely, as it is a no-op if virNWFilterSnoopState was
not yet initialized.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow virNWFilterObjListFree to be called with a NULL argument.
This enables a later patch to use virNWFilterObjListFree as a
cleanup function safely, as it is a no-op if virNWFilterObj was
not yet initialized.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The capability is not used anymore since "-incoming defer" is supported
by all QEMU versions we care about.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All QEMU releases currently supported by libvirt already understand
"-incoming defer". We can drop the code handling "-incoming URI".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Don't try to align the output, it's not future-proof and it's for
debugging only.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new function aggregates the internal working of virXMLFormatElement
and virXMLFormatElementEmpty and also allows skipping the newline
after the opening tag to allow using this helper also in cases where we
don't format any child elements but directly a value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All these features are supposed to be handled by the call to
virDriverFeatureIsGlobal() placed right above the switch
statement, so if any of them is actually encountered inside
the switch statement it means there's a bug in the driver and
we should report an error.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In this batch:
- dnsmasq is dropped as build dependency
- Alpine Edge rpcgen package collision fix
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Note that links from the first table leading to sections of this
document further below were removed for simplicity.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The aim of 'restrictive' numatune mode is to rely solely on
CGroups to have QEMU running on configured NUMA nodes. However,
we were never setting the cpuset controller when a domain was
starting up. We are doing so only when
virDomainSetNumaParameters() is called (aka live pinning).
This is obviously wrong. Fortunately, fix is simple as
'restrictive' is similar to 'strict' - every location where
VIR_DOMAIN_NUMATUNE_MEM_STRICT occurs can be audited and
VIR_DOMAIN_NUMATUNE_MEM_RESTRICTIVE case can be added.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2070380
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is similar to v7.10.0-354-g06f405c627 except this time it
fixes CH driver.
With strict numatune we can't guarantee that all memory is moved
to new location. Therefore, let's forbid moving memory in that
case. However, allow it for restrictive mode, which is documented
to be best effort.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since its introduction in v1.3.2-43-gef1fa55e46 there is a dead
code in virDomainCgroupSetupGlobalCpuCgroup() (well,
qemuSetupGlobalCpuCgroup() back then). The code formats NUMA
nodeset but never sets it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virDomainCgroupSetupVcpuBW() is a NOP if both period and
quota to set are zero. There's no need to check in all the
callers for this special case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of reporting virReportError(..., g_strerror(), ...) let's
use proper virReportSystemError(). Generated with help of cocci:
@@
expression c;
@@
<...
- virReportError(c,
+ virReportSystemError(errno,
...,
- g_strerror(errno),
...);
...>
But then I had to hand fix format strings, because I'm not sure
if cocci even knows how to do that. And even if it did, I surely
don't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need to check whether a flag is not set just to set it
in that case.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Older GCC fails to understand that 'char *main' is a variable and
not main() function. Rename the variable to appease old GCC.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Note that we attempt to remove logs only if virtlogd is in use.
Otherwise we do not know the pattern for rotated files.
For example for VM named "foo" we can not use "foo.log*" pattern to
remove rotated logs as we can have VM named "foo.log" with log
"foo.log.log". We can add extra check that filename does not end with
".log" but for VM "foo.log" we can have rotated log "foo.log.log.1". Ok
let's check we don't have "log" in filename part corresponging to * but
what if someone will use logrotate with "%Y.log-%m-%d" 'dateformat'
option. In this case the check will exclude proper rotated files.
Yes, the last example if quite artificial but it shows it is difficult
to find out correctly rotated files when rotated files pattern is not
known. Thus the above decision only to support case with virtlogd when
we know the pattern.
Another reason for not removing log files when logrotate is present is
that due to races some files can escape deletion. For example foo.log.3
will be rotated to foo.log.4 after removing function will read directory
files and thus foo.log.4 will not be deleted.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If this flag is set on calling virDomainDestroyFlags flags then remove
per domain logs if possible.
This can be used by libguestfs to delete logs for temporary domain.
Otherwise such logs will stay wasting disk resources.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The KVM device assignment was removed in v5.7.0-rc1~103 but virsh
and its manpage still mention it. Don't do that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Also, validate that the requested feature is supported by QEMU.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce QEMU_CAPS_VIRTIO_RSS capability which tracks
virtio-net.rss attribute introduced in qemu-5.2.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Added "rss" and "rss_hash_report" configuration that should be
used with qemu virtio RSS. Both options are triswitches. Used as
"driver" options and affects only NIC with model type "virtio".
In other patches - options should turn on virtio-net RSS and hash
properties.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virNetworkForwardDef.managed is a bool but
virNetworkPortDef.hostdevpci.managed is a virTristateBool, which
means that the current code performs the following incorrect
conversion:
false -> BOOL_ABSENT
true -> BOOL_YES
Using the virTristateBoolFromBool() helper solves the issue.
Fixes: 6cb0ec48bd
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The property is parsed using virTristateBoolTypeFromString() but
formatted as if it was a regular bool, which results in the
following incorrect conversion:
BOOL_ABSENT -> managed='no'
BOOL_YES -> managed='yes'
BOOL_NO -> managed='yes'
Use the virTristateBoolTypeToString() helper to ensure the
setting can survive a roundtrip conversion.
Fixes: 4b4a981d60
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The check that ensures that at least one property among accel3d,
accel2d and rendernode has been provided by the user had been
lost during the conversion to virXMLPropTristateBool().
Fixes: 0fe2d8dd33
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function may fail and report an error, in which case we
should not just continue as if nothing happened.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Up until a few commits ago, libvirt produced this XML and so
we need to be able to read it back to prevent a bunch of
error : virXMLPropEnumInternal:516 : XML error: Invalid value
for attribute 'value' in element 'allowReboot': 'default'
messages from being logged on daemon upgrade when there are
running guests.
Fixes: 0fe2d8dd33
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We need it for a single scenario in which prop='default' has to
be treated as valid input.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the value is VIR_TRISTATE_BOOL_ABSENT we should just omit
the element entirely.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Found when building on Fedora 36 on s390x.
C compiler for the host machine: gcc (gcc 12.0.1 "gcc (GCC) 12.0.1 20220308 (Red Hat 12.0.1-0)")
C linker for the host machine: gcc ld.bfd 2.37-24
In function ‘cpuTestUpdateLiveCompare’,
inlined from ‘cpuTestUpdateLive’ at ../dist-unpack/libvirt-8.2.5/tests/cputest.c:784:12:
../dist-unpack/libvirt-8.2.5/tests/cputest.c:696:21: warning: potential null pointer dereference [-Wnull-dereference]
696 | featAct->policy == VIR_CPU_FEATURE_REQUIRE) ||
| ~~~~~~~^~~~~~~~
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All supported QEMUs now accept werror/rerror as argument for the
frontend disk device, so we can remove the old code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting with qemu-3.1 we always have the '-overcommit' argument and use
it instead of '-realtime'. Remove the capability check and fix all
fake-caps tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The flag was based on a version check which no longer made sense. Remove
the flag by replacing it's only use by an arch-check which is equivalent
at this point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All qemu versions now support FD passing either directly or via FDset.
Assume that we always have this capability so that we can simplify
chardev handling in many cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For modern qemu versions we use the presence of 'set-numa-node' qmp
command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some version checks no longer make sense as the minimum supported qemu
is now qemu-3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As of April 23 2022, Ubuntu 20.04 will be out for two years, which means
we no longer have to support Ubuntu 18.04 along with qemu-2.11 shipped
with it.
This then brings the minimum qemu version we have to support to
qemu-3.1:
Debian 10/Stable: 3.1
OpenSUSE Leap 15.3: 5.2
Ubuntu 20.04: 4.2
RHEL/Centos 8.4: 4.2
Next event in this space will be 2023/07/06 when Debian 11 will be out
for two years.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As of April 23 2022, Ubuntu 20.04 will be out for two years, which per
our platform support policy means we no longer have to support
Ubuntu 18.04.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-iommu needs to be an integrated device, and our address
assignment code will make sure that is the case. If the user has
provided an explicit address, however, we should make sure any
addresses pointing to a different bus are rejected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-iommu is a PCI device and attempts to use a different
address type should be rejected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The device is configured to be an integrated endpoint, as is
necessary for it to function correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is needed so that IOMMU devices can have addresses.
Existing IOMMU devices (intel-iommu and SMMUv3) are system
devices and as such don't have an address associated to them, but
virtio-iommu is a PCI device and needs one.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-iommu doesn't work without ACPI, so we need to make sure
the latter is enabled.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability detects the availability of the boot-bypass
property of the virtio-iommu-pci device.
This property was only introduced in QEMU 7.0 but, since the
device has been around for much longer, we end up querying its
properties for several more releases. As I don't have convenient
access to the 10+ binaries necessary to regenerate the replies,
I just put some fake data in there.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability detects the availability of the virtio-iommu-pci
device.
Note that, while this device is present even in somewhat old
versions of QEMU, it's only some recent changes that made it
actually usable for our purposes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The altered code is functionally equivalent to the previous one,
but it's already laid down in a way that will make further
changes easier and less messy.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new flag can be used to convince the PCI address assignment
algorithm to place a device directly on the root bus. It will be
used to implement support for virtio-iommu, which needs to be an
integrated device in order to work correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QEMU binary is built from the v7.0.0-rc2 tag.
This causes the argument to -device to be generated in JSON
format, same as what 1a691fe1c8 has done for x86_64.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The QEMU binary is built from the v7.0.0-rc2 tag.
Some of the additional capabilities that show up are a
consequence of more features being enabled in this build than
in the one used to generate the replies initially.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
With the recent changes, virQEMUCapsGetDefaultEmulator() has
become a trivial wrapper around this function, as well as its
only caller. Clean up the situation by merging the two.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
On a machine where no QEMU binary is installed, we end up logging
libvirtd: Cannot check QEMU binary /usr/libexec/qemu-kvm:
No such file or directory
which is not very useful in general, and downright misleading in
the case of operating systems that are not derived from RHEL.
This is a consequence of treating that specific path in a different
way from all other possible QEMU binary paths, and specifically of
not checking whether the file actually exists but sort of assuming
that it must do if we haven't found another QEMU binary earlier.
Address the issue by trying this path out in
virQEMUCapsFindBinaryForArch(), along with all the other possible
ones, and making sure it exists before returning it.
Reported-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
If we get to the bottom of the function we know that none of the
attempts to locate a QEMU binary has been successful, so we can
simply return NULL directly.
This makes it unnecessary variable used to store the path, for
which we can use a more descriptive name.
Lastly, comparing with NULL explicitly is somewhat uncommon in
libvirt and more verbose than the equivalent implicit comparison,
so get rid of it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
The 'debuglogs' knowledge base page has way more info and examples on
how to set logging use it instead of the ad-hoc examples.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use backticks to force monospace font instead of double quotes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The top level heading didn't contain the word 'port'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Fix the referenced anchor in 'formatdomain.rst' right away.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The first sentence was moved up a paragraph to stop treating the first
sub-heading as a page subtitle.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Instead of creating an empty object and then setting keys one
at a time, it is possible to pass a dict object to
configuration_data(). This is nicer because it doesn't require
repeating the name of the cfg_data object over and over.
There is one exception: the 'conf' object, where we store values
that are used directly by C code. In that case, using a dict
object is not feasible for two reasons: first of all, replacing
the set_quoted() calls would result in awkward code with a lot
of calls to format(); moreover, since code that modifies it is
sprinkled all over the place, refactoring it would probably
make things more complicated rather than simpler.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The default values used by the library are determined at configure
time based on a number of factors, and we should reflect them in
the installed configuration file to make the comments it contains
more useful.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/263
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since the workaround is specific to macOS, only disable compiler
warnings when building on that platform.
While at it, update the comment to reflect the fact that the
workaround is needed for all versions of the OS, including the
modern ones that we currently target.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Recent refactor (v8.1.0-217-ga193f4bef6) generalized job related enums
and functions by changing "qemu" prefix to "vir" and moving them to
src/hypervisor/domain_job.[ch]. This was in most cases a good thing, but
async job phases are driver specific and the corresponding functions
remained in src/qemu/qemu_domainjob.[ch], but still their prefix was
changed to "vir". Let's change it back to "qemu".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since libvirt aims to provide an API which is portable across hypervisors, the
concept of cgroups is not exposed directly in the API or XML configuration. It
is considered to be an internal implementation detail. Instead libvirt provides
a set of APIs for applying resource controls, which are then mapped to
corresponding cgroup tunables
Scheduler tuning
~~~~~~~~~~~~~~~~
Parameters from the "cpu" controller are exposed via the ``schedinfo`` command
in virsh.
::
# virsh schedinfo demo
Scheduler : posix
cpu_shares : 1024
vcpu_period : 100000
vcpu_quota : -1
emulator_period: 100000
emulator_quota : -1
Block I/O tuning
~~~~~~~~~~~~~~~~
Parameters from the "blkio" controller are exposed via the ``bkliotune`` command
in virsh.
::
# virsh blkiotune demo
weight : 500
device_weight :
Memory tuning
~~~~~~~~~~~~~
Parameters from the "memory" controller are exposed via the ``memtune`` command
in virsh.
::
# virsh memtune demo
hard_limit : 580192
soft_limit : unlimited
swap_hard_limit: unlimited
Network tuning
~~~~~~~~~~~~~~
The ``net_cls`` is not currently used. Instead traffic filter policies are set
directly against individual virtual network interfaces.
Legacy cgroups layout
---------------------
Prior to libvirt 1.0.5, the cgroups layout created by libvirt was different from
that described above, and did not allow for administrator customization. Libvirt
used a fixed, 3-level hierarchy ``libvirt/{qemu,lxc}/$VMNAME`` which was rooted
at the point in the hierarchy where libvirtd itself was located. So if libvirtd
was placed at ``/system/libvirtd.service`` by systemd, the groups for each
virtual machine / container would be located at
``/system/libvirtd.service/libvirt/{qemu,lxc}/$VMNAME``. In addition to this,
the QEMU drivers further child groups for each vCPU thread and the emulator
thread(s). This leads to a hierarchy that looked like
::
$ROOT
|
+- system
|
+- libvirtd.service
|
+- libvirt
|
+- qemu
| |
| +- vm1
| | |
| | +- emulator
| | +- vcpu0
| | +- vcpu1
| |
| +- vm2
| | |
| | +- emulator
| | +- vcpu0
| | +- vcpu1
| |
| +- vm3
| |
| +- emulator
| +- vcpu0
| +- vcpu1
|
+- lxc
|
+- container1
|
+- container2
|
+- container3
Although current releases are much improved, historically the use of deep
hierarchies has had a significant negative impact on the kernel scalability. The
legacy libvirt cgroups layout highlighted these problems, to the detriment of
the performance of virtual machines and containers.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
