IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If looking at the initial engine dump we should expect this to match
XE_FENCE_INITIAL_SEQNO - 1.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Doesn't look like we are accounting for seqno wrap. Just use
__dma_fence_is_later() like we already do for xe_hw_fence_signaled().
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The 'clear' field for register save/restore entries was being placed in
the value bits of the register rather than the mask bits; make sure it
gets shifted into the mask bits.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230419224909.4000920-1-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It looks like when tlb_invalidation.seqno overflows
TLB_INVALIDATION_SEQNO_MAX, we start counting again from one, as per
send_tlb_invalidation(). This is also inline with initial value we give
it in xe_gt_tlb_invalidation_init(). When calculating the
expected_seqno we should also take this into account.
While we are here also print out the values if we ever trigger the
warning.
v2 (José):
- drm_WARN_ON() is preferred over plain WARN_ON(), since it gives
information on the originating device.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/248
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add missing device info for Rocketlake.
While at it, also set the value for IS_ROCKETLAKE
macro which is right now set to 0.
v2: Also add abox_mask to the device info(Lucas)
v3: rebase
v4: Set IS_ROCKETLAKE (Anusha)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Tested-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>(v2)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
CI keeps triggering:
xe 0000:03:00.0: [drm] Restricting VRAM size to PCI resource size
(0x400000000->0x3fa000000)
Due to usable_size vs vram_size differences. However, we only want to
trigger the drm_warn() to let developers know that the system they are
using is going clamp the VRAM size to match the IO size, where they can
likely only use 256M of VRAM. Once we properly support small-bar we can
revisit this.
v2 (Lucas): Drop the TODO for now
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Rocketlake uses TGL GuC and HuC
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
PCODE_WRITE_MIN_FREQ_TABLE is only applicable to platforms with an LLC.
Change the discrete GPU check to an LLC check instead; this take care of
skipping not only the discrete platforms, but also integrated platforms
like MTL that do not have an LLC.
Fixes MTL dmesg error:
xe 0000:00:02.0: [drm] *ERROR* PCODE Mailbox failed: 1 Illegal Command
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230410183910.2696628-3-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Some driver initialization is conditional on the presence of an LLC.
Add an extra feature flag to support this.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230410183910.2696628-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Replace 'bool' fields with single bits to allow the various device
feature flags to pack more tightly.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20230410183910.2696628-1-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
A VM had a runtime PM ref, a engine can't be created without a VM, and
the engine holds a ref to the VM thus this is unnecessary. Beyond that
taking a ref in the engine create IOCTL and dropping it in the destroy
IOCTL is wrong as a user doesn't have to call the destroy IOCTL (e.g.
they can just kill the process or close the driver FD). If a user does
this PM refs are leaked.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The media GT requires a valid gt->kernel_bb_pool during driver probe to
allocate the WA and NOOP batchbuffers used to record default context
images. Dynamically allocate the bb_pools so that the primary and media
GT can use the same pool during driver init.
The media GT still shouldn't be need the USM pool, so only hook up the
kernel_bb_pool for now.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20230410200229.2726648-1-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The wait_event_timeout() on g2h_fence.wq which is declared on
stack can return before the wake_up() gets called, resulting in a
stack out of bound access when wake_up() accesses the g2h_fene.wq.
Do not declare g2h_fence related wait_queue_head_t on stack.
Fixes the below KASAN BUG and associated kernel crashes.
BUG: KASAN: stack-out-of-bounds in do_raw_spin_lock+0x6f/0x1e0
Read of size 4 at addr ffff88826252f4ac by task kworker/u128:5/467
CPU: 25 PID: 467 Comm: kworker/u128:5 Tainted: G U 6.3.0-rc4-xe #1
Workqueue: events_unbound g2h_worker_func [xe]
Call Trace:
<TASK>
dump_stack_lvl+0x64/0xb0
print_report+0xc2/0x600
kasan_report+0x96/0xc0
do_raw_spin_lock+0x6f/0x1e0
_raw_spin_lock_irqsave+0x47/0x60
__wake_up_common_lock+0xc0/0x150
dequeue_one_g2h+0x20f/0x6a0 [xe]
g2h_worker_func+0xa9/0x180 [xe]
process_one_work+0x527/0x990
worker_thread+0x2d1/0x640
kthread+0x174/0x1b0
ret_from_fork+0x29/0x50
</TASK>
Tested-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Bruce Chang <yu.bruce.chang@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This stopped working now that TTM treats moving a pinned object through
ttm_bo_validate() as an error, for the general case. Add some new
routines to handle the new special casing needed for suspend-resume.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/244
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now that most of the characteristics of a device are associated with the
graphics and media IPs, the remaining contents of xe_device_desc can be
cleaned up a bit:
* 'gt' is unused; drop it
* DEV_INFO_FOR_EACH_FLAG only covers two flags and is only used in this
one file; drop the unnecessary macro complexity
* Convert .has_4tile to a single bitfield bit so that it can be packed
with the other feature flags
* Move 'platform' lower in the structure for better packing
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230406235621.1914492-10-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add a simple KUnit test to ensure that the hardware engine lists for
GMD_ID IP definitions are sensible (i.e., no graphics engines defined
for the media IP and vice versa).
Only the IP descriptors for GMD_ID platforms are checked for now.
Presumably the engine lists on older pre-GMD_ID platforms shouldn't be
changing. We can extend the KUnit testing in the future if we decide we
want to check those as well.
v2:
- Add missing 'const' in xe_call_for_each_media_ip to avoid compiler
warning.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230406235621.1914492-9-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If graphics_desc and media_desc are not specified in a platform's
xe_device_desc, treat this as an indication that the IP version should
be determined from the hardware's GMD_ID register.
Note that leaving media_desc unset for a platform that simply doesn't
have the IP (e.g., PVC) is also okay --- a read of the GMD_ID register
offset will be attempted, but since there's no register at that location
a value of '0' will be returned, effectively disabling media support.
Mapping of version -> IP description is done via a table lookup; this
table will be re-used in future patches for some KUnit testing.
v2:
- Drop dummy structures. NULL can be safely used for both the GMD_ID
cases and the "media not present case."
- Use a table-based lookup of GMD_ID versions rather than a simple
switch statement; the table will allow us to easily perform kunit
testing of all the IP descriptors.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230406235621.1914492-8-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Printing the name, along with the IP version number, will help reduce
confusion about which IP is present on a platform.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230406235621.1914492-7-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The total number of GTs supported by a platform should be one primary
GT, one media GT (if media version >= 13), and a number of remote tile
GTs dependent on the graphics IP present. Express this more clearly in
the device setup.
Note that xe->info.tile_count is inaccurately named; the rest of the
driver treats this as the GT count, not just the tile count. This
will need to be cleaned up at some point down the road.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230406235621.1914492-6-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Break the top-level platform_engine_mask field into separate
hw_engine_mask fields in the graphics and media structures. Since
hardware has more flexibility to mix-and-match IP versions going
forward, this allows each IP to list exactly which engines it provides;
the final per-GT engine list can then be constructured from those:
* On platforms without a standalone media GT (i.e., media IP versions
prior to 13), the primary GT's engine list is the union of the
graphics IP's engine list and the media IP's engine list.
* Otherwise, GT0's engine list is the graphics IP's engine list.
* For GT1 and beyond, the type of GT determines which IP's engine list
is used.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230406235621.1914492-5-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Most of the traits currently in the device descriptor structures are
either tied to the graphics IP or should be inferred from the graphics
IP. This becomes important on MTL and beyond where IP versions are
supposed to be detected from the hardware's GMD_ID registers rather than
mapped from PCI devid.
Engine masks are left where they are for now; they'll be dealt with
separately in a future patch.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230406235621.1914492-4-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Set require_force_probe explicitly in each platform's description
structure rather than embedding it within the FOO_FEATURES macros. Even
though we expect all platforms currently supported by the Xe driver to
be under force_probe protection, this will help prepare for some other
upcoming restructuring.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230406235621.1914492-3-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Rather than storing all characteristics for an entire platform in the
xe_device_desc structure, create secondary graphics and media structures
to hold traits and feature flags specific to those IPs. This will
eventually allow us to assign the graphics and media characteristics at
runtime based on the contents of the relevant GMD_ID registers.
For now, just move the IP versions into the new structures to keep
things simple. Other IP-specific fields will migrate to these
structures in future patches.
Note that there's one functional change introduced by this: previously
PVC was recognized as media version 12.60. That's technically true, but
in practice the media engines are fused off on all production hardware.
By simply not assigning a media IP structure to PVC it will effectively
be treated as IP version 0.0 now (which the rest of the driver should
treat as non-existent media).
v2:
- Split the new structures out to their own header. This will ease the
addition of KUnit tests later.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230406235621.1914492-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When debugging issues related to GuC/HuC, it's important to know what is
the firmware version being used. The version from the filename can't be
relied upon, also because it normally only contains the major version
(except for the ones under experimental support).
Log the version from the blob after reading the CSS header. Example:
xe 0000:03:00.0: [drm] Using GuC firmware (70.5) from i915/dg2_guc_70.bin
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20230405224725.1993719-1-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If CCS0 was fused we did not write this register thus CCS engine were
not enabled resulting in driver load failures.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Update the logic to autoselect GuC/HuC for the platforms with the
following improvements:
- Document what is the firmware file that is expected to be
loaded and what is checked from blob headers
- When the platform is under force-probe it's desired to enforce
the full-version requirement so the correct firmware is used
before widespread adoption and backward-compatibility
commitments
- Directory from which we expect firmware blobs to be available in
upstream linux-firmware repository depends on the platform: for
the ones supported by i915 it uses the i915/ directory, but the ones
expected to be supported by xe, it's on the xe/ directory. This
means that for platforms in the intersection, the firmware is
loaded from a different directory, but that is not much important
in the firmware repo and it avoids firmware duplication.
- Make the table with the firmware definitions clearly state the
versions being expected. Now with macros to select the version it's
possible to choose between full-version/major-version for GuC and
full-version/no-version for HuC. These are similar to the macros used
in i915, but implemented in a slightly different way to avoid
duplicating the macros for each firmware/type and functionality,
besides adding the support for different directories.
- There is no check added regarding force-probe since xe should
reuse the same firmware files published for i915 for past
platforms. This can be improved later with additional
kunit checking against a hardcoded list of platforms that
falls in this category.
- As mentioned in the TODO, the major version fallback was not
implemented before as currently each platform only supports one
major. That can be easily added later.
- GuC version for MTL and PVC were updated to 70.6.4, using the exact
full version, while the
After this the GuC firmware used by PVC changes to pvc_guc_70.5.2.bin
since it's using a file not published yet.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://lore.kernel.org/r/20230324051754.1346390-4-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In order to avoid mistakes when populating the workarounds, it's good to
be able to test if the entries added are all compatible for a certain
platform. The platform itself is not needed as long as we create fake
devices with enough configuration for the RTP helpers to process the
tables. Common mistakes that can be avoided:
- Entries clashing the bitfields being updated
- Register type being mixed (MCR vs regular / masked vs regular)
- Unexpected errors while adding the reg_sr entry
To test, inject a duplicate entry in gt_was, but with platform == tigerlake
rather than the currenct graphics version check:
{ XE_RTP_NAME("14011059788"),
XE_RTP_RULES(PLATFORM(TIGERLAKE)),
XE_RTP_ACTIONS(SET(GEN10_DFR_RATIO_EN_AND_CHICKEN, DFR_DISABLE))
},
This produces the following result:
$ ./tools/testing/kunit/kunit.py run \
--kunitconfig drivers/gpu/drm/xe/.kunitconfig xe_wa
[14:18:02] Starting KUnit Kernel (1/1)...
[14:18:02] ============================================================
[14:18:02] ==================== xe_wa (1 subtest) =====================
[14:18:02] ======================== xe_wa_gt =========================
[14:18:02] [drm:xe_reg_sr_add] *ERROR* Discarding save-restore reg 9550 (clear: 00000200, set: 00000200, masked: no): ret=-22
[14:18:02] # xe_wa_gt: ASSERTION FAILED at drivers/gpu/drm/xe/tests/xe_wa_test.c:116
[14:18:02] Expected gt->reg_sr.errors == 0, but
[14:18:02] gt->reg_sr.errors == 1 (0x1)
[14:18:02] [FAILED] TIGERLAKE (B0)
[14:18:02] [PASSED] DG1 (A0)
[14:18:02] [PASSED] DG1 (B0)
...
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20230401085151.1786204-8-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add some basic unit tests for rtp. This is intended to prove the
functionality of the rtp itself, like coalescing entries, rejecting
non-disjoint values, etc.
Contrary to the other tests in xe, this is a unit test to test the
sw-side only, so it can be executed on any machine - it doesn't interact
with the real hardware. Running it produces the following output:
$ ./tools/testing/kunit/kunit.py run --raw_output-kunit \
--kunitconfig drivers/gpu/drm/xe/.kunitconfig xe_rtp
...
[01:26:27] Starting KUnit Kernel (1/1)...
KTAP version 1
1..1
KTAP version 1
# Subtest: xe_rtp
1..1
KTAP version 1
# Subtest: xe_rtp_process_tests
ok 1 coalesce-same-reg
ok 2 no-match-no-add
ok 3 no-match-no-add-multiple-rules
ok 4 two-regs-two-entries
ok 5 clr-one-set-other
ok 6 set-field
[drm:xe_reg_sr_add] *ERROR* Discarding save-restore reg 0001 (clear: 00000001, set: 00000001, masked: no): ret=-22
ok 7 conflict-duplicate
[drm:xe_reg_sr_add] *ERROR* Discarding save-restore reg 0001 (clear: 00000003, set: 00000000, masked: no): ret=-22
ok 8 conflict-not-disjoint
[drm:xe_reg_sr_add] *ERROR* Discarding save-restore reg 0001 (clear: 00000002, set: 00000002, masked: no): ret=-22
[drm:xe_reg_sr_add] *ERROR* Discarding save-restore reg 0001 (clear: 00000001, set: 00000001, masked: yes): ret=-22
ok 9 conflict-reg-type
# xe_rtp_process_tests: pass:9 fail:0 skip:0 total:9
ok 1 xe_rtp_process_tests
# Totals: pass:9 fail:0 skip:0 total:9
ok 1 xe_rtp
...
Note that the ERRORs in the kernel log are expected since it's testing
incompatible entries.
v2:
- Use parameterized table for tests (Michał Winiarski)
- Move everything to the xe_rtp_test.ko and only add a few exports to the
right namespace
- Add more tests to cover FIELD_SET, CLR, partially true rules, etc
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst<maarten.lankhorst@linux.intel.com> # v1
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20230401085151.1786204-7-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When there's an entry that is dropped when xe_reg_sr_add(), there's
not much we can do other than reporting the error - it's for certain a
driver issue or conflicting workarounds/tunings. Save the number of
errors to be used later by kunit to report where it happens.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230401085151.1786204-6-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Instead of requiring tests to initialize a fake device an keep it in
sync with xe_pci.c when it's platform-dependent, export a function from
xe_pci.c to be used and piggy back on the device info creation. For
simpler tests that don't need any specific platform and just need a fake
xe device to pass around, xe_pci_fake_device_init_any() can be used.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230401085151.1786204-5-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Instead of simply using EXPORT_SYMBOL() to export the functions needed
in xe.ko to be be called across modules, use EXPORT_SYMBOL_IF_KUNIT()
which will export the symbol under the EXPORTED_FOR_KUNIT_TESTING
namespace.
This avoids accidentally "leaking" these functions and letting them be
called from outside the kunit tests. If these functiosn are accidentally
called from another module, they receive a modpost error like below:
ERROR: modpost: module XXXXXXX uses symbol
xe_ccs_migrate_kunit from namespace EXPORTED_FOR_KUNIT_TESTING,
but does not import it.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/20230401085151.1786204-4-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Move code out of xe_pci.[ch] into tests/*.[ch], like is done in other
similar compilation units. Even if this is not part of "tests for
xe_pci.c", they are functions exported and required by other tests. It's
better not to clutter the module headers and sources with them.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230401085151.1786204-3-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Extract the part setting up from xe->info from xe_pci_probe() into its
own function. This pairs nicely with the display counterpart, avoids
info initialization to be placed elsewhere and helps future
improvements to build fake devices for tests.
While at it, normalize the names a little bit: the _get() suffix may be
mistaken by lock-related operation, so rename the function to
"find_subplatform()". Also rename the variable to subplatform_desc to
make it easier to understand, even if longer.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230401085151.1786204-2-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Although our only multi-tile platform today (PVC) doesn't support
display, it's possible that some future multi-tile platform will.
If/when this happens, display interrupts (both traditional display and
ASLE backlight interrupts raised as a Gunit interrupt) should be
delivered to the primary tile. Save away tile0's master_ctl value so
that it can still be used for display interrupt handling after the GT
loop.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230401002106.588656-9-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Although the hardware team has set aside some register bits for extra
media engines, no platform supported by the Xe driver today has VCS4-7
or VECS2-3. Drop the corresponding code (which was already commented
out); we can bring it back easily enough if such engines show up on a
future platform.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230401002106.588656-8-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The remaining "gen11_*" IRQ functions are common to all platforms
supported by the Xe driver. Drop the unnecessary prefix.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230401002106.588656-7-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Platforms supported by the Xe driver handle top-level interrupts in one
of two ways:
- Xe_LP platforms only have a "graphics master" register and lack a
"master tile" register, so top-level interrupt detection and
enable/disable happens in the graphics master.
- Xe_LP+ (aka DG1) and beyond have a "master tile" interrupt register
that controls the enable/disable of top-level interrupts and must
also be consulted to determine which tiles have received interrupts
before the driver moves on the process the graphics master register.
For functions that are only relevant to the first set of platforms,
rename the function prefix to Xe_LP since "gen11" doesn't make sense in
the Xe driver. Also add some comments briefly describing the two
top-level handlers.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230401002106.588656-6-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Any interrupt registers that were introduced by platforms i915
considered to be "gen11" or "gen12" are present on all platforms that
the Xe driver supports; drop the unnecessary prefixes.
While working in the area, also convert a few open-coded bit
manipulations over to REG_BIT and REG_FIELD_GET notation.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230401002106.588656-5-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo: removed display. That was later squashed to the xe Display patch]
It's no longer necessary to wrap these operations in macros; a simple
function will suffice. Also switch to function names that more clearly
describe what operation is being performed: unmask_and_enable() and
mask_and_disable().
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230401002106.588656-4-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For cases where IRQ_INIT and IRQ_RESET are used, the relevant interrupt
registers are always consecutive and ordered ISR, IMR, IIR, IER. Adding
helpers to look these up from a base offset will let us eliminate some
of the CPP pasting and simplify other upcoming patches.
v2:
- s/_REGS/_OFFSET/ for consistency. (Lucas)
- Move IMR/IIR/IER helpers into xe_irq.c; they aren't needed anywhere
else. (Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230401002106.588656-3-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
"Gen" terminology should be avoided in the Xe driver and "gen3" refers
to platforms that are 9 (!!) graphics generations earlier than the
oldest supported by the Xe driver, so this prefix really doesn't make
sense.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230401002106.588656-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently, unload pvc driver will generate a null dereference
and the call stack is as below.
[ 4850.618000] Call Trace:
[ 4850.620740] <TASK>
[ 4850.623134] ttm_bo_cleanup_memtype_use+0x3f/0x50 [ttm]
[ 4850.628661] ttm_bo_release+0x154/0x2c0 [ttm]
[ 4850.633317] ? drm_buddy_fini+0x62/0x80 [drm_buddy]
[ 4850.638487] ? __kmem_cache_free+0x27d/0x2c0
[ 4850.643054] ttm_bo_put+0x38/0x60 [ttm]
[ 4850.647190] xe_gem_object_free+0x1f/0x30 [xe]
[ 4850.651945] drm_gem_object_free+0x1e/0x30 [drm]
[ 4850.656904] ggtt_fini_noalloc+0x9d/0xe0 [xe]
[ 4850.661574] drm_managed_release+0xb5/0x150 [drm]
[ 4850.666617] drm_dev_release+0x30/0x50 [drm]
[ 4850.671209] devm_drm_dev_init_release+0x3c/0x60 [drm]
There are a couple issues, but the main one is due to TTM has only
one TTM_PL_TT region, but since pvc has 2 tiles and tries to setup
1 TTM_PL_TT each tile. The second will overwrite the first one.
During unload time, the first tile will reset the TTM_PL_TT manger
and when the second tile is trying to free Bo and it will generate
the null reference since the TTM manage is already got reset to 0.
The fix is to use one global TTM_PL_TT manager.
v2: make gtt mgr global and change the name to sys_mgr
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Vivi, Rodrigo <rodrigo.vivi@intel.com>
Signed-off-by: Bruce Chang <yu.bruce.chang@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Platform order in enum xe_platform started to be used by some parts of
the code, like the GuC/HuC firmware loading logic. The order itself is
not very important, but it's better to follow a convention: as was
documented in the comment above the enum, reorder the platforms by
graphics version. While at it, remove the gen terminology.
v2:
- Use "graphics version" instead of chronological order (Matt Roper)
- Also change pciidlist to follow the same order
- Remove "gen" from comments around enum xe_platform
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230331230902.1603294-1-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In xe_migrate functions, use proper vram io offset of the
tiles while calculating addresses.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In xe_migrate_sanity_kunit test, use correct expected value as
the expected value was not only used for the xe_migrate_clear(),
but also for the xe_migrate_copy() operation.
v2: Add 'Fixes' tag and update commit text
Fixes: 11a2407ed5f0 ("drm/xe: Stop accepting value in xe_migrate_clear")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In xe_migrate_sanity_kunit test, use proper batch base address
by considering usm case.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The rev field is always 0 so it ends up never used. In i915 it was
introduced because of CML: up to rev 5 it reuses the guc and huc
firmware blobs from KBL. After that there is a specific firmware for
that platform. This can be reintroduced later if ever needed.
With the removal of revid the packed attribute in
uc_fw_platform_requirement, which is there only for reducing the space
these tables take, can also be removed since it has even more limited
usefulness: currently there's only padding of 2 bytes. Remove the
attribute to avoid the unaligned access.
$ pahole -C uc_fw_platform_requirement build64/drivers/gpu/drm/xe/xe_uc_fw.o
struct uc_fw_platform_requirement {
enum xe_platform p; /* 0 4 */
const struct uc_fw_blob blob; /* 4 10 */
/* size: 16, cachelines: 1, members: 2 */
/* padding: 2 */
/* last cacheline: 16 bytes */
};
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230324051754.1346390-2-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The MI_BATCH_BUFFER_END is already added automatically by
__xe_bb_create_job(); including it in the construction of the workaround
batchbuffer results in an unnecessary duplicate.
Link: https://lore.kernel.org/r/20230329173334.4015124-4-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We should WARN (not BUG) when creating a job if the batchbuffer does not
have sufficient space and padding. The hardware prefetch requirements
should also be considered.
Link: https://lore.kernel.org/r/20230329173334.4015124-3-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The hardware prefetches several cachelines of data from batchbuffers
before they are parsed. This prefetching only stops when the parser
encounters an MI_BATCH_BUFFER_END instruction (or a nested
MI_BATCH_BUFFER_START), so we must ensure that there is enough padding
at the end of the batchbuffer to prevent the prefetcher from running
past the end of the allocation and potentially faulting.
Bspec: 45717
Link: https://lore.kernel.org/r/20230329173334.4015124-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
