IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Use REG_BIT() & co. for the vlv/chv DPIO PHY registers.
Note that DPIO_BIAS_CURRENT_CTL_SHIFT was incorrectly defined
to be 21 wheres 20 is the correct value. It is not used in the
code though so didn't bother splitting to a separate patch.
v2: drop stray tabs (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-14-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Drop the leading underscore from the CHV PHY common lane
register definitions. We use these directly from actual
code so the underscore here is misleading as usually it indicates
an intermediate define that shouldn't be used directly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-12-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
In the encoder hooks we are dealing primarily with the encoder,
so derive the DPIO PHY from the encoder rather than the pipe.
Technically this doesn't matter as we can't cross connect
pipes<->port across PHY boundaries, but it does conveny the
intention more accurately.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Stop using 'pipe' directly as the DPIO PHY channel. This
does happen to work on VLV since it just has the one PHY
with CH0==pipe A and CH1==pipe B. But explicitly converting
the thing to the right enum makes the whole thing less
confusing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The spreadsheet defines the PLL register block as having
the dwords in the following order:
block dwords offsets
PLL1 0x0-0x7 0x00-0x1f
PLL2 0x0-0x7 0x20-0x3f
PLL1ext 0x10-0x1f 0x40-0x5f
PLL2ext 0x10-0x1f 0x60-0x7f
So dword indexes 0x8-0xf don't even exist. Renumber
our register defines to match.
Note that the spreadsheet used hex numbering whereas our
defiens are in decimal. Perhaps we should change that?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
VLV_PLL_DW9_BCAST is actually VLV_PCS_DW17_BCAST. The address
does kinda look like it goes to the PLL block on a first glance,
but broadcast is special and doesn't even exist for the PLL
(only PCS and TX have it).
The fact that we use a broadcast write here is a bit sketchy
IMO since we're now blasting the register to all PCS splines
across the whole PHY. So the PCS registers in the other channel
(ie. other pipe/port) will also be written. But I guess the
fact that we always write the same value should make this a nop
even if the other channel is already enabled (assuming the VBIOS/GOP
didn't screw up and use some other value...).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Replace all code that initializes or releases fbdev emulation
throughout the driver. Instead initialize the fbdev client by a
single call to intel_fbdev_setup() after i915 has registered its
DRM device. Just like similar code in other drivers, i915 fbdev
emulation now acts like a regular DRM client. Do the same for xe.
The fbdev client setup consists of the initial preparation and the
hot-plugging of the display. The latter creates the fbdev device
and sets up the fbdev framebuffer. The setup performs display
hot-plugging once. If no display can be detected, DRM probe helpers
re-run the detection on each hotplug event.
A call to drm_client_dev_unregister() releases all in-kernel clients
automatically. No further action is required within i915. If the fbdev
framebuffer has been fully set up, struct fb_ops.fb_destroy implements
the release. For partially initialized emulation, the fbdev client
reverts the initial setup. Do the same for xe and remove its call to
intel_fbdev_fini().
v8:
- setup client in intel_display_driver_register (Jouni)
- mention xe in commit message
v7:
- update xe driver
- reword commit message
v6:
- use 'i915' for i915 device (Jouni)
- remove unnecessary code for non-atomic mode setting (Jouni, Ville)
- fix function name in commit message (Jouni)
v3:
- as before, silently ignore devices without displays
v2:
- let drm_client_register() handle initial hotplug
- fix driver name in error message (Jani)
- fix non-fbdev build (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-7-tzimmermann@suse.de
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move code from ad-hoc fbdev callbacks into DRM client functions
and remove the old callbacks. The functions instruct the client
to poll for changed output or restore the display.
The DRM core calls both, the old callbacks and the new client
helpers, from the same places. The new functions perform the same
operation as before, so there's no change in functionality.
Fox xe, remove xe_display_last_close(), which restored the fbdev
display. As with i915, the DRM core's drm_lastclose() performs
this operation automatically.
v8:
- mention xe in commit message
v7:
- update xe driver
v6:
- return errors from client callbacks (Jouni)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-6-tzimmermann@suse.de
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Unregister all in-kernel clients before unloading the i915 driver. For
other drivers, drm_dev_unregister() does this automatically. As i915 and
xe do not use this helper, they have to perform the call by themselves.
Note that there are currently no in-kernel clients in i915 or xe. The
patch prepares the drivers for a related update of their fbdev support.
v8:
- unregister clients in intel_display_driver_unregister() (Jani)
- mention xe in commit message (Rodrigo, Jani)
v7:
- update xe driver
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-5-tzimmermann@suse.de
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Initialize i915's fbdev client by giving an instance of struct
drm_client_funcs to drm_client_init(). Also clean up with
drm_client_release().
Doing this in i915 prevents fbdev helpers from initializing and
releasing the client internally (see drm_fb_helper_init()). No
functional change yet; the client callbacks will be filled later.
v6:
- rename client to "intel-fbdev" (Jouni)
v2:
- call drm_fb_helper_unprepare() in error handling (Jani)
- fix typo in commit message (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-4-tzimmermann@suse.de
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move functions within intel_fbdev.c to simplify later updates. Minor
style fixes to make checkpatch happy, but no functional changes.
v5:
- style fixes (checkpatch)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-3-tzimmermann@suse.de
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Export drm_client_dev_unregister() for use by the i915 driver. The
driver does not use drm_dev_unregister(), so it has to clean up the
in-kernel DRM clients by itself.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-2-tzimmermann@suse.de
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Pass the dev_priv parameter to the low-level helpers, and move the
implicit dev_priv usage one level higher.
sed -i "s/\(_MMIO_PIPE2(\|_MMIO_TRANS2(\|_MMIO_CURSOR2(\)/\1dev_priv, /" \
$(git ls-files drivers/gpu/drm/i915)
Name the parameter "display", as the generics allow it to be display
already.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3a865664898586ff6cb8e74eab3d1f36eafc0557.1713890614.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Most users of _MMIO_PIPE3() and _MMIO_PORT3() need to add the MMIO base
to the registers. Convert the macros to _MMIO_BASE_PIPE3() and
_MMIO_BASE_PORT3() to move the base addition until after the register
selection. If the register address depends on DISPLAY_MMIO_BASE(), this
removes the need to figure the base out for each register, and it only
needs to be added once.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4b95f125f5021abc00b5fc661b2728f1b583c01e.1713890614.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Stop relying on the dev_priv local variable in the DSI register
macros. Pass struct intel_display pointer to the macros. Move the MIPI
DSI MMIO base selection to a different level, passing it to _MMIO_MIPI()
and doing the addition there.
Start using the local display variable for all intel_de_* usage, and
opportunistically use it for other things than display registers as
well.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6dd52f3fce3527242479aadc276d05de74ceae5d.1713520813.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The dmc_firmware_path parameter is clearly a display parameter. Move it
there so it's available to both i915 and xe modules. This also cleans up
the ugly member in struct xe_device.
v2:
- New try with the NULL/"" param value issue resolved
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7c8223b68fdafbc72bee0bf5afdb2ab15261cf00.1713519628.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The distinction between the dmc_firmware_path module param being NULL
and the empty string "" is problematic. It's not possible to set the
parameter back to NULL via sysfs or debugfs. Remove the distinction, and
consider NULL and the empty string to be the same thing, and use the
platform default for them.
This removes the possibility to disable DMC (and runtime PM) via
i915.dmc_firmware_path="". Instead, use "/dev/null" as the magic
firmware path to skip DMC firmware loading and disable runtime PM.
v2: Add support for i915.dmc_firmware_path="/dev/null" (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8695aca8a6643e36bb680bc2dcab97c637e70b00.1713519628.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Return failures from parse_dmc_fw() instead of relying on
intel_dmc_has_payload(). Handle and error report them slightly better,
including a new error message for when the firmware does not contain the
main program.
v2: Print specific error message for payload not found (Gustavo)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/18833681978ec3ac779cce943221cc5b532c7c45.1713519628.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Clarify request_firmware() error handling. Don't proceed to trying to
parse non-existent firmware or check for payload when request_firmware()
failed to begin with. There's no reason to release_firmware() either
when request_firmware() failed.
Also move the message about DMC firmware homepage here, as in other
cases the user probably has some firmware, although its parsing fails
for some reason.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0654bb3480f8d2103225d26f665badead5495532.1713519628.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add consistent definitions for the per-lane PHY TX registers
on bxt/glk. The current situation is a slight mess with some
registers having a LN0 define, while others have a parametrized
per-lane definition.
v2: Adjust gvt accordingly
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417151211.32135-1-ville.syrjala@linux.intel.com
Enabling the 5k@60Hz uncompressed mode on the MediaTek/Dell U3224KBA
monitor results in a blank screen, at least on MTL platforms on UHBR
link rates with some (<30) uncompressed bpp values. Enabling compression
fixes the problem, so do that for now. Windows enables DSC always if the
sink supports it and forcing it to enable the mode without compression
leads to the same problem above (which suggests a panel issue with
uncompressed mode).
The same 5k mode on non-UHBR link rates is not affected and lower
resolution modes are not affected either. The problem is similar to the
one fixed by the HBLANK expansion quirk on Synaptics hubs, with the
difference that the problematic mode has a longer HBLANK duration. Also
the monitor doesn't report supporting HBLANK expansion; either its
internal MST hub does the expansion internally - similarly to the
Synaptics hub - or the issue has another root cause, but still related
to the mode's short HBLANK duration. Enable the quirk for the monitor
adjusting the detection for the above differences.
v2: Rebase on drm_dp_128132b_supported() change.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417142217.457902-1-imre.deak@intel.com
