IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Use a new form of hints to reduce device scanning in
vgchange -aay run by the udev rule for event based
autoactivation.
Standard hints allow a command with a named VG arg to scan
only the PVs in the named VG, rather than scanning all
available PVs. Standard hints are useful with a stable set
of system devices. When new devices are arriving, as occurs
during system startup, the hints are repeatedly invalidated,
which makes standard hints unhelpful while devices are
regularly appearing. This is the situation in which
vgchange -aay is used, so standard hints are not generally
helpful for autoactivation.
In the context of system startup, pvscan --cache is keeping
track of available PVs using the pvs_online files, similar
to what the hints file does for a running system. Given this,
a new hint mode, hints = "pvs_online", is added which derives
an equivalent to standard hints, based on pvs_online files
that are being created by udev-run pvscans. This hint mode
is useful while devices are appearing, e.g. during system
startup, and vgchange -aay can benefit from it.
pvscan --cache -aay autoactivation already has a similar
optimization (the "quick" activation case) that is based
on the pvs_online file, but it is not implemented as a
form of hints.
This new form of hints is mainly useful in the context of
event based autoactivation, during which standard hints are
not useful. Once the system is in a steady state after startup
(devices are not regularly appearing), the standard hints are
most useful. The pvs_online hint method could be used on a
running system, but would be no better than standard hints,
and may be inferior because pvs_online files are not rigidly
updated after system startup.
Add two new fixed activation services for startup:
lvm-activate-vgs-main and lvm-activate-vgs-last.
The -main service runs early, without service dependencies.
The -last service runs later, after other services have
started (other services that may set up devices for PVs,
like mulitpathd.)
The lvm-activate-vgs services both run "vgchange -aay"
to activate all VGs that are preset and complete at the
time of system startup. When there are many VGs, these
two vgchange commands will replace many per-VG vgchange
commands.
The last service enables event activation by creating
the file /run/lvm/event-activation-on. After that,
new devices that appear will be processed by event based
autoactivation commands. Prior to the existence of the
event-activation-on file, event-based commands do nothing.
lvm.conf event_activation_options can be used to
configure service-based activation only, or event-based
activation only, or the approach described above which
begins with service based activation and then switches
to event-based.
service_only: only the -main and -last services will
activate VGs. VGs on devices that appear later will
not be autoactivated.
event_only: the -main and -last services will not
activate any VGs, and all VGs will be activated
from per-VG event-based activation commands.
service_to_event: the -main and -last services will
activate VGs that are complete at the time the
services run, and VGs that appear later will be
activated from per-VG event-based activation
commands.
Using --vgonline with vgchange -aay makes vgchange use
/run/lvm/vgs_online/ files in the same way as pvscan.
If the online file for the vg does not exist and the
command is able to exclusively create it, then it will
activate the VG. If the online file exists or the create
fails, then the VG will not be activated.
Enhance logic for checking supported systemd version,
while doing only a single check for systemd package.
For version checking use PKG_CHECK_EXISTS() macro.
Also use one pkg check for blkid.
Avoid checking version for thin/cache_check when tools are not present
on system.
Resolve event_activation configure option just once.
Do not print debug_devs about 'bad' filtering, when
actually filter already printed reason for skipping
Do not trace more then once about backup being disabled.
No debug when unlinked file does not exists in pvscan.
Handle automatically new setttings
--disable-systemd-journal
--disable-appmachineid
Both setting will check presence of apropriate header files.
In case they are present, build will try to automatically build with
them (adding systemd dependency)
User can anytime disabled them and drop systemd dependency.
Also add --with-default-use-devices-file configure option to
select automatically default value for this option.
For this moment keep default upstream as 0
Reporting non-PVs / "all devices" is only done by
pvs -a or pvdisplay -a, so avoid the work managing
a list of all devices in process_each_pv.
In the case when it's needed, use the results of
label_scan which already determines which devs
are not PVs.
Just setting lvm.conf level=N should not send messages to
syslog (now the journal by default.)
Sending messages to syslog should require setting lvm.conf
log { syslog=1 level=N }.
'.ID_FS_TYPE_NEW' is a custom property added by an LVM UDev rule
which is now being removed and 'ID_FS_TYPE' has the same value.
Signed-off-by: Vojtech Trefny <vtrefny@redhat.com>
new udev rule 69-dm-lvm.rules replaces
69-dm-lvm-meta.rules and lvm2-pvscan.service
udev rule calls pvscan directly on the added device
pvscan output indicates if a complete VG can be activated
udev env var LVM_VG_NAME_COMPLETE is used to pass complete
VG name from pvscan to the udev rule
udev rule uses systemd-run to run vgchange -aay <vgname>
Configure via lvm.conf log/journal or command line --journal.
Possible values:
"command" records command information.
"output" records default command output.
"debug" records full command debugging.
Multiple values can be set in lvm.conf as an array.
One value can be set in --journal which is added to
values set in lvm.conf
pvscan --cache <dev>
. read only dev
. create online file for dev
pvscan --listvg <dev>
. read only dev
. list VG using dev
pvscan --listlvs <dev>
. read only dev
. list VG using dev
. list LVs using dev
pvscan --cache --listvg [--checkcomplete] <dev>
. read only dev
. create online file for dev
. list VG using dev
. [check online files and report if VG is complete]
pvscan --cache --listlvs [--checkcomplete] <dev>
. read only dev
. create online file for dev
. list VG using dev
. list LVs using dev
. [check online files and report if VG is complete]
. [check online files and report if LVs are complete]
[--vgonline]
can be used with --checkcomplete, to enable use of a vg online
file. This results in only the first pvscan command to see
the complete VG to report 'VG complete', and others will report
'VG finished'. This allows the caller to easily run a single
activation of the VG.
[--udevoutput]
can be used with --cache --listvg --checkcomplete, to enable
an output mode that prints LVM_VG_NAME_COMPLETE='vgname' that
a udev rule can import, and prevents other output from the
command (other output causes udev to ignore the command.)
The list of complete LVs is meant to be passed to lvchange -aay,
or the complete VG used with vgchange -aay.
When --checkcomplete is used, lvm assumes that that the output
will be used to trigger event-based autoactivation, so the pvscan
does nothing if event_activation=0 and --checkcomplete is used.
Example of listlvs
------------------
$ lvs -a vg -olvname,devices
LV Devices
lv_a /dev/loop0(0)
lv_ab /dev/loop0(1),/dev/loop1(1)
lv_abc /dev/loop0(3),/dev/loop1(3),/dev/loop2(1)
lv_b /dev/loop1(0)
lv_c /dev/loop2(0)
$ pvscan --cache --listlvs --checkcomplete /dev/loop0
pvscan[35680] PV /dev/loop0 online, VG vg incomplete (need 2).
VG vg incomplete
LV vg/lv_a complete
LV vg/lv_ab incomplete
LV vg/lv_abc incomplete
$ pvscan --cache --listlvs --checkcomplete /dev/loop1
pvscan[35681] PV /dev/loop1 online, VG vg incomplete (need 1).
VG vg incomplete
LV vg/lv_b complete
LV vg/lv_ab complete
LV vg/lv_abc incomplete
$ pvscan --cache --listlvs --checkcomplete /dev/loop2
pvscan[35682] PV /dev/loop2 online, VG vg is complete.
VG vg complete
LV vg/lv_c complete
LV vg/lv_abc complete
Example of listvg
-----------------
$ pvscan --cache --listvg --checkcomplete /dev/loop0
pvscan[35684] PV /dev/loop0 online, VG vg incomplete (need 2).
VG vg incomplete
$ pvscan --cache --listvg --checkcomplete /dev/loop1
pvscan[35685] PV /dev/loop1 online, VG vg incomplete (need 1).
VG vg incomplete
$ pvscan --cache --listvg --checkcomplete /dev/loop2
pvscan[35686] PV /dev/loop2 online, VG vg is complete.
VG vg complete
The new system_id_source="appmachineid" will cause
lvm to use an lvm-specific derivation of the machine-id,
instead of the machine-id directly. This is now
recommended in place of using machineid.
Do not store full path with each archived name reduces memory usage if
the directory has thousands of entries and just add 'dir' path when
needed.
Also emit info print message to a user if the total size of archived
files for a VG is more then 128MiB or 8192 files.
TODO: Consider wheather adding a new 'lvm.conf archive{option}' to support
trimming these wild archive sizes can make situation better.
We already support retain_min && retain_days - but if user is
generating too many and too large archives with minutes - maybe archiving
should be disabled by a user - as it's not producing anything largely usable
and just slows-down command ??
If we add 'retain_max & retain_max_size' the condition will go against
each other and we need to chose priorities.
mm
Consider missing config tree from vg read to be an internal error
since we do not want to 'regenerate' this one in expesive parsing way.
Also if there is any failure on recreating committed VG, make it also
a 'vg_write' error.
Corrupt metadata text (with good mda header) was being handled
in the label_scan phase, but not in the vg_read phase. This
was sufficient because metadata areas would always be read and
checksummed during label_scan (metadata parsing was skipped
previously as an optimization.)
This changed with the optimization in
commit 61a6f9905e
"metadata: optimize reading metadata copies in scan"
Now, some metadata areas will not be read and checksummed
at all during the label_scan phase, only during the vg_read
phase. This means that bad metadata text may first be detected
in the vg_read phase. So, add equivalent bad metadata handling
to the vg_read path to match the label_scan path.
With larger metadata, decoding 'localtime()' for hinting time creation
of every LV may cause excessive check of /etc/localtime file.
Set TZ to ":/etc/localtime" so glibc reads this file just once
instead of check everytime if there has anything changed.
While being in lockless scanning phase, we can avoid reading and checking
matching metadata copies if we already know them from other PV
and just rely on matching metadata header information.
These copies will be examined later during locked metadata read/write
access.
This patch may postpone discovering some read failures to locked phase.
When creating lvm2 metadata for VG, lvm2 allocate some buffer,
and if buffer is not big enough, the buffer is 'reallocated' bigger,
and whole metadata creation is repeated until metadata fits.
We can try to use 'previous' metadata size as hint to reduce looping
here.
Preserve computed crc32 check from first written PV, just like we
preserve generated metadata.
Also there is no need to call crc32 twice on wrapping buffer with 2 calcs,
result must be always the same as with single crc32 checking.
Kernel patch 8b638081bd4520f63db1defc660666ec5f65bc15
introduced support to return UUID in DM_LIST_DEVICES_CMD.
Useful when asking for UUID of each device where the list
could be now returned directly with NAME && UUID for each device.
Returning UUID is done in backward-compatible way. There's one unused
32-bit word value after the event number. This patch sets the bit
DM_NAME_LIST_FLAG_HAS_UUID if UUID is present and
DM_NAME_LIST_FLAG_DOESNT_HAVE_UUID if it isn't (if none of these bits is
set, then we have an old kernel that doesn't support returning UUIDs). The
UUID is stored after this word. The 'next' value is updated to point after
the UUID, so that old version of libdevmapper will skip the UUID without
attempting to interpret it.
It's basically irrelavant which value we assing to optarg,
since it's set by getopt() function, but Coverity tool
is incorrectly reporting possibly dereference of NULL.
sysconf() may also return -1 although rather theoretically.
Default to 4K when such case would happen.
Also in function call it just once and keep as static variable.
Analyzer here was rather confused about possiblity of loosing previously
assigned device pointers - fixed by passing zero initialize memory
before first assign.
Ensure only nonNULL 'du' pointer is dereference altough the comment
to the last assign 'du' pointer already suggest 'NULL' case should not happen.
So just being explicit.
mer du
Error path in _lockd_retrive_vg_pv_list() has not zeroed released path
caussing possible double-free later in the code.
Fix it by using one single function freeing lock_pvs structure.
The cmd memory space is allocated by zalloc, and the registration
fails and is not released.
Although this code would be ever triggered just in the case
of some internal (likely compilation) bug.
Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com>
When building lvm2 in Gentoo/ChromeOS with the ASAN memory
sanitizer enabled, man-generator fails with the following
error. Initializing makes the error go away.
* SUMMARY: MemorySanitizer: use-of-uninitialized-value /build/amd64-generic/tmp/portage/sys-fs/lvm2-2.02.187-r3/work/LVM2.2.02.187/tools/man-generator.c:3316:6 in _include_description_file
* Exiting
* ASAN error detected:
* ==2548047==WARNING: MemorySanitizer: use-of-uninitialized-value
* #0 0x558b00ab4730 in _include_description_file /build/amd64-generic/tmp/portage/sys-fs/lvm2-2.02.187-r3/work/LVM2.2.02.187/tools/man-generator.c:3316:6
* #1 0x558b00ab4730 in _print_man /build/amd64-generic/tmp/portage/sys-fs/lvm2-2.02.187-r3/work/LVM2.2.02.187/tools/man-generator.c:3426:21
* #2 0x558b00ab4730 in main /build/amd64-generic/tmp/portage/sys-fs/lvm2-2.02.187-r3/work/LVM2.2.02.187/tools/man-generator.c:3570:7
* #0 0x7fa9b2cbb807 in find_derivation /var/tmp/portage/cross-x86_64-cros-linux-gnu/glibc-2.33-r8/work/glibc-2.33/iconv/gconv_db.c:583:15
* #1 0x558b00a29559 in ?? ??:0
*
* Uninitialized value was created by an allocation of 'statbuf.i.i' in the stack frame of function 'main'
* #0 0x558b00ab1d4d in main /build/amd64-generic/tmp/portage/sys-fs/lvm2-2.02.187-r3/work/LVM2.2.02.187/tools/man-generator.c:3505
It's not a good idea to change passed 'argv[]' and replace it with
pointers to local stack - although in this case we are not using
this argv[] after return from this function.
Mask for strncpy() Coverity report warning would
actually need to copy buffer from 'tmp_name' instead of 'str'.
But replace it directly with single 'strncpy()' again for better readbility,
just mask out the warning reported for this strncpy instance
(so we do not need to put comment fro every call of strcpy_name_len).
Looks like newer version of mkfs.ext4 consumes more 'real' disk space,
when formating virtual volumes - so double the size of thin-pool to
have enough backend chunks for provisioning.
Existing mechanism was not able to trace root volume issue.
Simplify the functionality by using simply using activated flag
and trace the dtree in reverse order.
When cache creation fails on table reload path, implemen more
advanced revert solution, that tries to restore state of LVM
metadata into is look before actual caching started.
Loading invalid MQ/SMQ policy settings table line cause immediate
rejection - to prevent such failure, automatically filter valid
settins before it is being uploaded by lvm2.
For invalid setting issue a warnning informing user how to remove
them.
This solution is used to keep running cached LVs that might had
been created in the past with invalid settings that have been actually
unused due to another code bug.
When generating table line for cache target line,
the estimation of added arguments was incorrectly
calculated as the evaluation order of "?" is
made after "+".
However the result was 'masked' by the
Reported-by: Jian Cai jcai19
New versions of kvdo module exposes statistics at new location:
/sys/block/dm-XXX/vdo/statistics/...
Enhance lvm2 to access this location first.
Also if the statistic info is missing - make it 'debug' level info,
so it is not failing 'lvs' command.
Do not call 'dmsetup info' for non-dm devices.
Better handling for VGNAME and LVNAME - so when convering LV as
backend device automatically recognize it and reuse LV name for VDOLV.
Add prompt for final confirmation before actual conversion is started
(once confirmed, lvm2 commands no longer prompts to avoid leaving
conversion in the middle of its process.)
Compilation needs to generate 'C' locale sorted command file
definitions. To always enforce 'C' sorting rules user LC_ALL
instead of LANG, as LANG settings can be overuled by
other LC settings like LC_COLLATE and may result into miscompiled
lvm2 binary if locales ordering differs from 'C'.
Reported-by: jmp-lvm2@ookaze.fr
Since VDO is always returns 'zero' on unprovisioned read
and every provisioned block is always 'zeroed' on partial writes,
we can avoid 'zeroing' of such LVs.
Some device id types can only be used with specific device major
numbers, so use this restriction to avoid some comparisions.
This is more efficient, and can avoid some incorrect matches.
pvid and vgid are sometimes a null-terminated string, and
other times a 'struct id', and the two types were often
cast between each other. When a struct id was cast to a char
pointer, the resulting string would not necessarily be null
terminated. Casting a null-terminated string id to a
struct id is fine, but is still avoided when possible.
A struct id is: int8_t uuid[ID_LEN]
A string id is: char pvid[ID_LEN + 1]
A convention is introduced to help distinguish them:
- variables and struct fields named "pvid" or "vgid"
should be null-terminated strings.
- variables and struct fields named "pv_id" or "vg_id"
should be struct id's.
- examples:
char pvid[ID_LEN + 1];
char vgid[ID_LEN + 1];
struct id pv_id;
struct id vg_id;
Function names also attempt to follow this convention.
Avoid casting between the two types as much as possible,
with limited exceptions when known to be safe and clearly
commented.
Avoid using variations of strcpy and strcmp, and instead
use memcpy/memcmp with ID_LEN (with similar limited
exceptions possible.)
- Use a new function for all instances of copying
a null-terminated string into a fixed size struct
field that is not null-terminated.
- use memcpy when copying between struct fields of
the same size
When multiple lvchange refresh processes executed at the same time,
suspend/resume ioctl on the same dm, some of these commands will be failed
for dm aready change status, and ioctl will return EINVAL in _do_dm_ioctl function.
to avoid this problem, add READ_FOR_ACTIVATE flags in lvchange refresh process,
it will hold LCK_WRITE lock and avoid suspend/resume dm at the same time.
Signed-off-by: Long YunJian <long.yunjian@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Fix memory leaks on error paths for allocated
path and backup_file name by converting allocation to
dm_pool_alloc and also change devicefile structure to contain
embeded path as last struct member - so we could allocate
only needed string size instead of PATH_MAX from pool.
TODO: still to be fixed 'mf' struct.
Recent commit 84bd394cf9
"writecache: use block size 4096 when no fs is found"
failed to account for the case where writecache is attached
to thin pool data. Checking fs block size on the thin pool
data LV is wrong, and checking the fs block on each thin LV
would be impractical, so default to 512 which cannot break
any existing file systems, and require the user to specify
4k when appropriate.
When splitting VG with thin/cache pool volume, handle pmspare during
such split and allocate new pmspare in new VG or extend existing pmspare
there and eventually drop pmspare in original VG if is no longer needed
there.
As pmspare is an invisible LV it's not getting automatically removed
since vgremove removes only visible LVs and it depending LVs.
If there was no other thin/cache pool volume, such pmspare stayed
undeleted and caused command failure.
So handle explicitelly such forgotten pmspare and remove it.
When check active componet of thinLV with external origin,
we need to check if the external origin isn't already active.
For this however we need to use layered check for -real device.
The lvm2-pvscan service runs pvscan --cache -aay <dev> for
device addition, and pvscan --cache <dev> on device removal.
For event_activation=0, the addition does nothing. Fix
device removal to also do nothing for event_activation=0.
Device removal was previously doing some work to process
the removal which slowed down stopping lvm2-pvscan services.
sysfs-based multipath component detection quit if a
device had multiple holders, and in this case would
fail to detect a device was an mpath component.
For the pv_min_size check, always use dev_get_size()
which is commonly used elsewhere, and don't bother
asking libudev for the device size when
external_device_info_source=udev.
related to config settings:
obtain_device_info_from_udev (controls if lvm gets
a list of devices from readdir /dev or from libudev)
external_device_info_source (controls if lvm asks
libudev for device information)
. Make the obtain_device_list_from_udev setting
affect only the choice of readdir /dev vs libudev.
The setting no longer controls if udev is used for
device type checks.
. Change obtain_device_list_from_udev default to 0.
This helps avoid boot timeouts due to slow libudev
queries, avoids reported failures from
udev_enumerate_scan_devices, and avoids delays from
"device not initialized in udev database" errors.
Even without errors, for a system booting with 1024 PVs,
lvm2-pvscan times improve from about 100 sec to 15 sec,
and the pvscan command from about 64 sec to about 4 sec.
. For external_device_info_source="none", remove all
libudev device info queries, and use only lvm
native device info.
. For external_device_info_source="udev", first check
lvm native device info, then check libudev info.
. Remove sleep/retry loop when attempting libudev
queries for device info. udev info will simply
be skipped if it's not immediately available.
. Only set up a libdev connection if it will be used by
obtain_device_list_from_udev/external_device_info_source.
. For native multipath component detection, use
/etc/multipath/wwids. If a device has a wwid
matching an entry in the wwids file, then it's
considered a multipath component. This is
necessary to natively detect multipath
components when the mpath device is not set up.
How to trigger:
```
~ # export LVM_SYSTEM_DIR=_
~ # pvscan
No matching physical volumes found
double free or corruption (!prev)
Aborted (core dumped)
```
when LVM_SYSTEM_DIR is empty, _load_config_file() won't be called.
when LVM_SYSTEM_DIR is not empty, cfl->cft links into cmd->config_files
by _load_config_file()@lib/commands/toolcontext.c
core dumped code: _destroy_config()@lib/commands/toolcontext.c
```
/* CONFIG_FILE/CONFIG_MERGED_FILES */
if ((cft = remove_config_tree_by_source(cmd, CONFIG_MERGED_FILES)))
config_destroy(cft);
else if ((cft = remove_config_tree_by_source(cmd, CONFIG_FILE)))
config_destroy(cft); <=== first free the cft
dm_list_iterate_items(cfl, &cmd->config_files)
config_destroy(cfl->cft); <=== double free the cft
```
Fixes: c43f2f8ae0
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
expands commit d5a06f9a7d
"pvscan: skip indexing devices used by LVs"
The dev cache index is expensive and slow, so limit it
to commands that are used to observe the state of lvm.
The index is only used to print warnings about incorrect
device use by active LVs, e.g. if an LV is using a
multipath component device instead of the multipath
device. Commands that continue to use the index and
print the warnings:
fullreport, lvmdiskscan, vgs, lvs, pvs,
vgdisplay, lvdisplay, pvdisplay,
vgscan, lvscan, pvscan (excluding --cache)
A couple other commands were borrowing the DEV_USED_FOR_LV
flag to just check if a device was actively in use by LVs.
These are converted to the new dev_is_used_by_active_lv().
Add tool 'vdoimport' to support easy conversion of an existing VDO manager managed
VDO volumes into lvm2 managed VDO LV.
When physical converted volume is already a logical volume, conversion
happens with the VG itself, just with validation for extent_size, so
the virtually sized logical VDO volume size can be expressed in extents.
Example of basic simple usage:
vdoimport --name vg/vdolv /dev/mapper/vdophysicalvolume
dev_cache_index_devs() is taking a large amount of time
when there are many PVs. The index keeps track of
devices that are currently in use by active LVs. This
info is used to print warnings for users in some limited
cases.
The checks/warnings that are enabled by the index are not
needed by pvscan --cache, so disable it in this case.
This may be expanded to other cases in future commits.
dev_cache_index_devs should also be improved in another
commit to avoid the extreme delays with many devices.
There have been two separate checks for metadata
validity: first that the metadata text begins with
a valid VG name, and second the checksum of the
metadata text. These happen in different places,
which means there have been two separate error paths
for invalid metadata. This also causes large metadata
to be read in multiple parts, the first part is read
just to check the vgname, and then remaining parts are
read later when the full metadata is needed.
This patch moves the vg name verification so it's
done just before the checksum verification, which
results in a single error path for invalid metadata,
and causes the entire metadata to be read together
rather that in parts from different parts of the code.
If label_scan encounters bad vg metadata, invalidate
bcache data for the device and reread the mda_header
and metadata text back to back. With concurrent commands
modifying large metadata, it's possible that the entire
metadata area can be rewritten in the time between a
command reading the mda_header and reading the metadata
text that the header points to. Since the label_scan
is just assembling an initial overview of devices, it
doesn't use locking to serialize with other commands
that may be modifying the vg metadata at the same time.
Recent commit 84bd394cf9
"writecache: use block size 4096 when no fs is found"
changed the default writecache block size from 512 to 4096
when no file system is detected. The fs block size detection
requires the libblkid BLOCK_SIZE feature, so skip tests on
systems without this. Otherwise, 4096 writecache added to
512 xfs leads fs io or mount failures.
Add profilable configurable setting for vdo pool header size, that is
used as 'extra' empty space at the front and end of vdo-pool device
to avoid having a disk in the system the may have same data is real
vdo LV.
For some conversion cases however we may need to allow using '0' header size.
TODO: in this case we may eventually avoid adding 'linear' mapping layer
in future - but this requires further modification over lvm code base.
In testing where we inject large amounts of additional output in stderr
we can occassionally get truncated stdout from lvm. Catching and dumping
the json for debug before we re-raise the exception. As this doesn't
happen without the error injecting wrapper around lvm, the error seems to
be with the wrapper.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
When exec'ing lvm, it's possible to get large amounts of both stdout
and stderr depending on the state of lvm and the size of the lvm
configuration. If we allow any of the buffers to fill we can end
up deadlocking the process. Ensure we are handling stdout & stderr
during lvm execution.
Ref. https://bugzilla.redhat.com/show_bug.cgi?id=1966636
Signed-off-by: Tony Asleson <tasleson@redhat.com>
When we are walking the new lvm state comparing it to the old state we can
run into an issue where we remove a VG that is no longer present from the
object manager, but is still needed by LVs that are left to be processed.
When we try to process existing LVs to see if their state needs to be
updated, or if they need to be removed, we need to be able to reference the
VG that was associated with it. However, if it's been removed from the
object manager we fail to find it which results in:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/lvmdbusd/utils.py", line 666, in _run
self.rc = self.f(*self.args)
File "/usr/lib/python3.6/site-packages/lvmdbusd/fetch.py", line 36, in _main_thread_load
cache_refresh=False)[1]
File "/usr/lib/python3.6/site-packages/lvmdbusd/lv.py", line 146, in load_lvs
lv_name, object_path, refresh, emit_signal, cache_refresh)
File "/usr/lib/python3.6/site-packages/lvmdbusd/loader.py", line 68, in common
num_changes += dbus_object.refresh(object_state=o)
File "/usr/lib/python3.6/site-packages/lvmdbusd/automatedproperties.py", line 160, in refresh
search = self.lvm_id
File "/usr/lib/python3.6/site-packages/lvmdbusd/lv.py", line 483, in lvm_id
return self.state.lvm_id
File "/usr/lib/python3.6/site-packages/lvmdbusd/lv.py", line 173, in lvm_id
return "%s/%s" % (self.vg_name_lookup(), self.Name)
File "/usr/lib/python3.6/site-packages/lvmdbusd/lv.py", line 169, in vg_name_lookup
return cfg.om.get_object_by_path(self.Vg).Name
Instead of removing objects from the object manager immediately, we will
keep them in a list and remove them once we have processed all of the state.
Ref:
https://bugzilla.redhat.com/show_bug.cgi?id=1968752
When execute IDM testing, the command reports error:
/usr/bin/install: cannot stat ‘lib/idm_inject_failure’: No such file
or directory
Since there have a stale program in my local environment, thus Makefile
always uses the stale program and doesn't report any issue. In the
brand new repository, it doesn't contain an idm_inject_failure program,
and Makefile doesn't build it without specifying the dependency, thus
the test command complaints the file 'idm_inject_failure' is not found.
This patch adds the dependency 'lib/idm_inject_failure' for IDM testing,
so it can firstly build the injection program and dismiss the error.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
When adding a device to the devices file with --adddev, lvm
by default chooses the best device ID type for the new device.
The new --deviceidtype option allows the user to override the
built in preference. This is useful if there's a problem with
the default type, or if a secondary type is preferrable.
If the specified deviceidtype does not produce a device ID,
then lvm falls back to the preference it would otherwise use.
Previously there have been necessary explicit call of backup (often
either forgotten or over-used). With this patch the necessity to
store backup is remember at vg_commit and once the VG is unlocked,
the committed metadata are automatically store in backup file.
This may possibly alter some printed messages from command when the
backup is now taken later.
Instead of calling explicit archive with command processing logic,
move this step towards 1st. vg_write() call, which will automatically
store archive of committed metadata.
This slightly changes some error path where the error in archiving
was detected earlier in the command, while now some on going command
'actions' might have been, but will be simply scratched in case
of error (since even new metadata would not have been even written).
So general effect should be only some command message ordering.
As SUSE build tool reports the warning:
lvmlockd-core.c: In function 'client_thread_main':
lvmlockd-core.c:4959:37: warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size 6 [-Wformat-truncation=]
snprintf(buf, sizeof(buf), "path[%d]", i);
^~
lvmlockd-core.c:4959:31: note: directive argument in the range [0, 2147483647]
snprintf(buf, sizeof(buf), "path[%d]", i);
^~~~~~~~~~
To dismiss the compilation warning, enlarge the array "buf" to 17
bytes to support the max signed integer: string format 6 bytes + signed
integer 10 bytes + terminal char "\0".
Reported-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
This patch is to test timeout handling after activate LV with shareable
mode. It has the same logic with the testing for LV exclusive mode,
except it verifies the locking with shareable mode.
On the host A:
make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdj3,/dev/sdk3,/dev/sdl3 \
LVM_TEST_MULTI_HOST=1 T=multi_hosts_lv_sh_timeout_hosta.sh
On the host B:
make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdj3,/dev/sdk3,/dev/sdl3 \
LVM_TEST_MULTI_HOST=1 T=multi_hosts_lv_sh_timeout_hostb.sh
Signed-off-by: Leo Yan <leo.yan@linaro.org>
This patch is to test timeout handling after activate LV with exclusive
mode. It contains two scripts for host A and host B separately.
The script on host A firstly creates VGs and LVs based on the passed
back devices, every back device is for a dedicated VG and a LV is
created as well in the VG. Afterwards, all LVs are activated by host A,
so host A acquires the lease for these LVs. Then the test is designed
to fail on host A.
After the host A fails, host B starts to run the paired testing script,
it firstly fails to activate the LVs since the locks are leased by
host A; after lease expiration (after 70s), host B can achieve the lease
for LVs and it can operate LVs and VGs.
On the host A:
make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdj3,/dev/sdk3,/dev/sdl3 \
LVM_TEST_MULTI_HOST=1 T=multi_hosts_lv_ex_timeout_hosta.sh
On the host B:
make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdj3,/dev/sdk3,/dev/sdl3 \
LVM_TEST_MULTI_HOST=1 T=multi_hosts_lv_ex_timeout_hostb.sh
Signed-off-by: Leo Yan <leo.yan@linaro.org>
This patch is to add LV testing on multi hosts. There have two scripts,
the script multi_hosts_lv_hosta.sh is used to create LVs on one host,
and the second script multi_hosts_lv_hostb.sh will acquire
global lock and VG lock, and remove VGs. The testing flow verifies the
locking operations between two hosts with lvmlockd and the backend
locking manager.
On the host A:
make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdj3,/dev/sdk3,/dev/sdl3 \
LVM_TEST_MULTI_HOST=1 T=multi_hosts_lv_hosta.sh
On the host B:
make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdj3,/dev/sdk3,/dev/sdl3 \
LVM_TEST_MULTI_HOST=1 T=multi_hosts_lv_hostb.sh
Signed-off-by: Leo Yan <leo.yan@linaro.org>
This patch is to add VG testing on multi hosts. There have two scripts,
the script multi_hosts_vg_hosta.sh is used to create VGs on one host,
and the second script multi_hosts_vg_hostb.sh afterwards will acquire
global lock and VG lock, and remove VGs. The testing flow verifies the
locking operations between two hosts with lvmlockd and the backend
locking manager.
On the host A:
make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdj3,/dev/sdk3,/dev/sdl3 \
LVM_TEST_MULTI_HOST=1 T=multi_hosts_vg_hosta.sh
On the host B:
make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdj3,/dev/sdk3,/dev/sdl3 \
LVM_TEST_MULTI_HOST=1 T=multi_hosts_vg_hostb.sh
Signed-off-by: Leo Yan <leo.yan@linaro.org>
If the IDM lock manager fails to access drives, might partially fail to
access drives (e.g. it fails to access one of three drives), or totally
fail to access drives, the lock manager should handle properly for these
cases. When the drives are partially failure, if the lock manager still
can renew the lease for the locking, then it doesn't need to take any
action for the drive failure; otherwise, if it detects it cannot renew
the locking majority, it needs ti immediately kill the VG from the
lvmlockd.
This patch adds the test for verification the IDM lock manager failure;
the command can be used as below:
# make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdp3,/dev/sdl3,/dev/sdq3 \
LVM_TEST_FAILURE=1 T=idm_ilm_failure.sh
Signed-off-by: Leo Yan <leo.yan@linaro.org>
If the fabric is broken instantly and the partial drives connected on
the fabric disappear from the system. For this case, according to the
locking algorithm in idm, the lease will not lose since the half drives
are still alive so can renew the lease for the half drives. On the
other hand, since the VG lock requires to acquire the majority of drive
number, but half drives failure cannot achieve the majority, so it
cannot acquire the lock for VG and thus cannot change metadata for VG.
This patch is to add half brain failure for idm; the test command is as
below:
# make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdp3,/dev/sdo3 LVM_TEST_FAILURE=1 \
T=idm_fabric_failure_half_brain.sh
Signed-off-by: Leo Yan <leo.yan@linaro.org>
If the fabric is broken instantly, the drives connected on the fabric
will disappear from the system. For worst case, the lease is timeout
and the drives cannot recovery back. So a new test is added to emulate
this scenario, it uses a drive for LVM operations and this drive is also
used for locking scheme; if the drive and all its associated paths (if
the drive supports multiple paths) are disconnected, the lock manager
should stop the lockspace for the VG/LVs.
And afterwards, if the drive recovers back, the VG/LV resident in the
drive should be operated properly. The test command is as below:
# make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdp3 LVM_TEST_FAILURE=1 \
T=idm_fabric_failure_timeout.sh
Signed-off-by: Leo Yan <leo.yan@linaro.org>
When the fabric failure occurs, it will lose the connection with hosts
instantly, and after a while it can recovery back so that the hosts can
continue to access the drives.
For this case, the locking manager should be reliable for this case and
can dynamically handle this case and allows user to continue to use the
VG/LV with associated locking scheme.
This patch adds a testing to emulate the fabric faliure, verify LVM
commands for this case. The testing usage is:
# make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdo3,/dev/sdp3,/dev/sdp4 \
LVM_TEST_FAILURE=1 T=idm_fabric_failure.sh
Signed-off-by: Leo Yan <leo.yan@linaro.org>
After the lvmlockd abnormally exits and relaunch the daemon, if LVM
commands continue to run, lvmlockd and the backend lock manager (e.g.
sanlock lock manager or IDM lock manager) should can continue to serve
the requests from LVM commands.
This patch adds a test to emulate lvmlockd failure, and verify the LVM
commands after lvmlockd recovers back. Below is an example for testing
the case:
# make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdo3,/dev/sdp3,/dev/sdp4 \
LVM_TEST_FAILURE=1 T=lvmlockd_failure.sh
Signed-off-by: Leo Yan <leo.yan@linaro.org>
When the drive failure occurs, the IDM lock manager and lvmlockd should
handle this case properly. E.g. when the IDM lock manager detects the
lease renewal failure caused by I/O errors, it should invoke the kill
path which is predefined by lvmlockd, so that the kill path program
(like lvmlockctl) can send requests to lvmlockd to stop and drop lock
for the relevant VG/LVs.
To verify the failure handling flow, this patch introduces an idm
failure injection program, it can input the "percentage" for drive
failures so that can emulate different failure cases.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
This patch is to add the stress testing, which launches three threads,
one thread is for creating/removing PV, one thread is for
creating/removing VG, and the last one thread is for LV operations.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
This patch is to add the stress testing, which launches two threads,
each thread creates LV, activate and deactivate LV in the loop; so this
can test for multi-threading in lvmlockd and its backend lock manager.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
This patch is to add the stress testing, which loops to create LV,
activate and deactivate LV in the single thread.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Add checking for lvmlockd log, this can be used for the test cases which
are interested in the interaction with lvmlockd.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
For testing idm locking scheme, it's good to cleanup the idm context
before run the test cases. This can give a clean environment for the
testing.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
In current implementation, the option "LVM_TEST_BACKING_DEVICE" only
supports to specify one backing device; this patch is to extend the
option to support multiple backing devices by using comma as separator,
e.g. below command specifies two backing devices:
make check_lvmlockd_idm LVM_TEST_BACKING_DEVICE=/dev/sdj3,/dev/sdk3
This can allow the testing works on multiple drives and verify the
locking scheme if can work as expected for multiple drives case. For
example, for Seagate IDM locking scheme, if a VG uses two PVs, every PV
is resident on a drive, thus the locking operations will be sent to two
drives respectively; so the extension for "LVM_TEST_BACKING_DEVICE" can
help to verify different drive configurations for locking.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
This patch is to introduce testing option LVM_TEST_LOCK_TYPE_IDM, with
specifying this option, the Seagate IDM lock manager will be launched as
backend for testing. Also add the prepare and remove shell scripts for
IDM.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Calling clear_hint_file() to invalidate hints would acquire
the hints flock before the global flock which could cause deadlock.
The lock order requires the global lock to be taken first.
pvchange was always invalidating hints, which was unnecessary;
only invalidate hints when changing a PV uuid. Because of the
lock ordering, take the global lock before clear_hint_file which
locks the hints file.
The macro LOCKDIDM_SUPPORT is missed in configure.h.in file, thus when
execute "configure" command, it has no chance to add this macro in the
automatic generated header include/configure.h.
This patch adds macro LOCKDIDM_SUPPORT into configure.h.in.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
For shared VG or LV locking, IDM locking scheme needs to use the PV
list assocated with VG or LV for sending SCSI commands, thus it requires
to use some places to generate PV list.
In reviewing the flow for LVM commands, the best place to generate PV
list is in the locking lib. So this is why this patch parses PV list as
shown. It iterates over all the PV nodes one by one, and compare with
the VG name or LV prefix string. If any PV matches, then the PV is
added into the PV list. Finally the PV list is sent to lvmlockd daemon.
Here as mentioned, it compares LV prefix string with the format
"lv_name_", the reason is it needs to find out all relevant PVs, e.g.
for the thin pool, it has LVs for metadata, pool, error, and raw LV, so
we can use the prefix string to find out all PVs belonging to the thin
pool.
For the global lock, it's not covered in this patch. To avoid the egg
and chicken issue, we need to prepare the global lock ahead before any
locking can be used. So the global lock's PV list is established in
lvmlockd daemon by iterating all drives with partition labeled with
"propeller".
Signed-off-by: Leo Yan <leo.yan@linaro.org>
We can consider the drive firmware a server to handle the locking
request from nodes, this essentially is a client-server model.
DLM uses the kernel as a central place to manage locks, so it also
complies with client-server model for locking operations. This is
why IDM and DLM are similar with each other for their wrappers.
This patch largely works by generalizing the DLM code paths and then
providing degeneralized functions as wrappers for both IDM and DLM.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
To allow the IDM locking scheme be used by users, this patch hooks the
IDM wrapper; it also introducs a new locking type "idm" and we can use
it for global lock with option '-g idm'.
To support IDM locking type, the main change in the data structure is to
add pvs path arrary. The pvs list is transferred from the lvm commands,
when lvmlockd core layer receives message, it extracts the message with
the keyword "path[idx]". Finally, the pv list will pass to IDM lock
manager as the target drives for sending IDM SCSI commands.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Alongside the existed locking schemes of DLM and sanlock, this patch is
to introduce new locking scheme: In-Drive-Mutex (IDM).
With the IDM support in the drive, the locks are resident in the drive,
thus, the locking lease is maintained in a central place: the drive
firmware. We can consider this is a typical client-server model,
every host (or node) in the server cluster launches the request for
leasing mutex to a drive firmware, the drive firmware works as an
arbitrator to grant the mutex to a requester and it can reject other
applicants if the mutex has been acquired. To satisfy the LVM
activation for different modes, IDM supports two locking modes:
exclusive and shareable.
Every IDM is identified with two IDs, one is the host ID and another is
the resource ID. The resource ID is a unique identifier for what the
resource it's protected, in the integration with lvmlockd, the resource
ID is combined with VG's UUID and LV's UUID; for the global locking,
the bytes in resource ID are all zeros, and for the VG locking, the
LV's UUID is set as zero. Every host can generate a random UUID and
use it as the host ID for the SCSI command, this ID is used to clarify
the ownership for mutex.
For easily invoking the IDM commands to drive, like other locking
scheme (e.g. sanlock), a daemon program named IDM lock manager is
created, so the detailed IDM SCSI commands are encapsulated in the
daemon, and lvmlockd uses the wrapper APIs to communicate with the
daemon program.
This patch introduces the IDM locking wrapper layer, it forwards the
locking requests from lvmlockd to the IDM lock manager, and returns the
result from drives' responding.
One thing should be mentioned is the IDM's LVB. IDM supports LVB to max
7 bytes when stores into the drive, the most significant byte of 8 bytes
is reserved for control bits. For this reason, the patch maps the
timestamp in macrosecond unit with its cached LVB, essentially, if any
timestamp was updated by other nodes, that means the local LVB is
invalidate. When the timestamp is stored into drive's LVB, it's
possbile to cause time-going-backwards issue, which is introduced by the
time precision or missing synchronization acrossing over multiple nodes.
So the IDM wrapper fixes up the timestamp by increment 1 to the latest
value and write back into drive.
Currently LVB is used to track VG changes and its purpose is to notify
lvmetad cache invalidation when detects any metadata has been altered;
but lvmetad is not used anymore for caching metadata, LVB doesn't
really work. It's possible that the LVB functionality could be useful
again in the future, so let's enable it for IDM in the first place.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
When the device is not a PV print
"No PV found on device ..."
instead of
"Failed to read lvm info for ... PVID ."
an earlier check had been added with a different
message for the same condition.
error reading dev and no pvid on dev were both
returning 0. make it easier for callers to
know which, if they care.
return 1 if the device could be read, regardless
of whether a pvid was found or not.
set has_pvid=1 if a pvid is found and 0 if no
pvid is found.
While we heavily try to spot arrays that are not yet in-sync,
some kernels tends to block our lvm2 command in kernel,
while we resume these smaller raid arrays even for 5 seconds.
But since the result is not really wrong - report these
check failures only as TEST WARNING.
Missed -l option in man page, although users should prefer
lvresize -r when the also want to do a volume management,
as there they can specify i.e. extents for allocation.
Also mention dm-crypt support in command description.
If the 'act' has been already processed by add_client_result()
it could have been possibly release - so avoid accessin 'act->'
afterward and go for next item directly.
This case happens when i.e. we convert LV to another type,
when we change existing LV into a different type - so change
to debug level and avoid confusing users with message about
Device path not match.
We may eventually enhnace caching code to drop cached info
after taking lock and reading VG.
With commit 0b18c25d93 there
was introduced 'zalloc()' for allocation of outdates pvs,
but no matching 'free()' is present.
Switch to use cmd mempool instead of adding free() code into
several places.
If a cmd def implies an LV type without --type
in the required options, then include the implied
type in the cmd def as AUTOTYPE: <type>
instead of including the redundant --type foo
in the OO list of options.
Including an implied --type in the OO list would
often cause multiple cmd defs to potentially be
identical when options were used, and a user
command could match more than one cmd def.
The AUTOTYPE values are listed in man page and
help output as
[ --type foo (implied) ]
If a user command includes --type, it will usually
match a cmd def with --type in the required options.
But, if the user command matches a cmd def with
AUTOTYPE, then the specifed --type and AUTOTYPE must
match.
The man-generator program has a new --check
option that compares cmd defs to find any cmd defs
that are equivalent with the use of options,
and should have their options adjusted.
Compares cmd defs based on two principles for avoiding repeated
commands (where a given command could match more than one cmd def):
. a cmd def should be a unique combination of required
option args and position args
. avoid adding optional options to a cmd def that if
used would make the command match a different cmd def
FIXME: record when repeated cmd defs are found so we can
avoid reporting them twice, e.g. once for A vs B and
second time for B vs A.
Correcting some usage of Bold and Italics (files).
Adding some missing SEE ALSO.
Fixing missed replaceable paths that are configurable.
Be careful about .P in .TP sections - need to use .sp for space line.
Use .UR/.UE for URL references.
Use #DEFAULT_SYS_DIR# replaceable string for devicesfile
so the man pages installation respects configured settings.
Update some missing lvm.conf(5) references.
Add missing VG into description of thin pool creation command.
Remove one duplicated thin-pool creation command.
Remove options --discards and --errorwhenfull from the list when the command describes
only creation of a thin volume - as these options do apply for thin-pool.
Also use here more correct name OO_LVCONVERT_THINPOOL instead of OO_LVCONVERT_THIN.
Reorder extra options for cache & thin-pool before common pool options.
Order consistenly --stripes and --stripesize after --extents option
so the options related to pools are better together.
Remove invalid snapshot creation description - since this case is
handled through our configurable spare volume creation.
Add some missing optional --type parameters for few command instancies.
Emit .ad l / .ad b less frequently around larger blocks
we want to keep left aligned.
Avoid emittting empty lines.
Reduce .HP usage and replace it with .TP.
However keep .HP for all option listings, as i.e. html rendering
can't handle well combintion of .TP an .HP together and .TP alone
is not indenting 2nd. line of long option line.
(For .TP line we don't need to emit .br)
Surround .SH with dots for better look.
For some .TP use plain more readable .I for a line.
Support rendering of optional [Number] (for --units).
Use better markup for units and instead of long markup string,
show individual units with markup.
Enhance man typography decoration of optional option
prefixes like --[raid]writebeind and use regular font to render []
as these are not part of the option name itself.
Sed replacements script missed to properly replace several '-' to '\-'.
Replace it with simpler set of regexes.
Also add new target 'make checksed' for testing with examples,
where the replacement should or should not occure for easier testing.
Previously, accepted LV types were presented as a series of suffixes
after the "LV" on the command line. The addition of many new types
resulted in this becoming too long, e.g
lvconvert --type cache --cachepool LV LV_linear_striped_thinpool_vdo_vdopool_vdopooldata_raid
For man pages, move these types from the command line to a new line
dedicated to listing accepted LV types:
lvconvert --type cache --cachepool LV LV1
...
LV1 types: linear striped thinpool vdo vdopool vdopooldata raid
The special "LV1" is used as a reference to avoid confusion
with other LVs that may appear on the command line. There
are currently no commands with more than one typed LV, but
if there are cases with more, then "LV2" could also be used.
For command line usage/-h output, drop the LV types from the
command line specification. The more detailed is not needed
in the help output and can be found in the man page.
With to use .TP where it's easy and doesn't change layout
(since .HP is marked as deprecated) - but .TP is not always perfetc match.
Avoid submitting empty lines to troff and replace them mostly with .P
and use '.' at line start to preserve 'visual' presence of empty line
while editing man page manually when there is no extra space needed.
Fix some markup.
Add some missing SEE ALSO section.
Drop some white-space at end-of-lines.
Improve hyphenation logic so we do not split options.
Use '.IP numbers' only with first one the row (others in row
automatically derive this value)
Use automatic enumeration for .SH titles.
Guidelines in-use:
https://man7.org/linux/man-pages/man7/groff.7.htmlhttps://www.gnu.org/software/groff/manual/html_node/Man-usage.htmlhttps://www.gnu.org/software/groff/manual/html_node/Lists-in-ms.html
This reverts commit 8e7690b798.
Actully this was bad idea - to make it on pair.
-Zn for thin-pools is already used - so here user must have
create new pool and swap existing thin-pool metadata into.
So reverting this commit to avoid any possible regression.
It would be complicated to handle ',' alignment after hyphenation
changes ATM, but these commas seems to be there rather unneeded
so remove them and make the man output more clear.
Disable hyphenation around longer option lists (>42 chars)
and use \: to markup places for line splits.
The code ATM is somewhat mixtured so it's not easy to encapsulate
section .nh ... .hy.
ATM global _was_hyphen is used to properly finish sections after
disabled hyphenation.
When --with-... option is used as --without-... it gets
assigned value 'no' - so support it better where we can.
Also remove 'shared' from help as it's not supported.
The autoactivation property can be specified in lvcreate
or vgcreate for new LVs/VGs, and the property can be changed
by lvchange or vgchange for existing LVs/VGs.
--setautoactivation y|n
enables|disables autoactivation of a VG or LV.
Autoactivation is enabled by default, which is consistent with
past behavior. The disabled state is stored as a new flag
in the VG metadata, and the absence of the flag allows
autoactivation.
If autoactivation is disabled for the VG, then no LVs in the VG
will be autoactivated (the LV autoactivation property will have
no effect.) When autoactivation is enabled for the VG, then
autoactivation can be controlled on individual LVs.
The state of this property can be reported for LVs/VGs using
the "-o autoactivation" option in lvs/vgs commands, which will
report "enabled", or "" for the disabled state.
Previous versions of lvm do not recognize this property. Since
autoactivation is enabled by default, the disabled setting will
have no effect in older lvm versions. If the VG is modified by
older lvm versions, the disabled state will also be dropped from
the metadata.
The autoactivation property is an alternative to using the lvm.conf
auto_activation_volume_list, which is still applied to to VGs/LVs
in addition to the new property.
If VG or LV autoactivation is disabled either in metadata or in
auto_activation_volume_list, it will not be autoactivated.
An autoactivation command will silently skip activating an LV
when the autoactivation property is disabled.
To determine the effective autoactivation behavior for a specific
LV, multiple settings would need to be checked:
the VG autoactivation property, the LV autoactivation property,
the auto_activation_volume_list. The "activation skip" property
would also be relevant, since it applies to both normal and auto
activation.
Switch to plain 'kill' we should no longer need SIGKILL
as polling can be interrupted.
Resolve problem in aux wait_pvmove_lv_ready() that was using
lvm command to check for UUID - but this was interferring with
VG lock and it's been delaying confirmation.
So reducing slow-down of test - so it can run faster.
Enhance handling of interruptions of polling process and lvmpoll daemon.
Daemon should now react much faster on interrups (i.e. shutdown
sequence) and avoid taking lenghty sleep waiting on pvmove signaling.
If we are signaled with SIGTERM it should be at least as good
as with SIGINT - as the command should stop ASAP.
So when lvm2 command allows signal handling we also
enable SIGTERM handling. If there are some other signals
we should handle equally - we could just extend array.
Avoid emitting Local symbol and sort symbols from
start and add dependency on previous version
Should not change anything, just better followup
linkage guidlines.
Add missing description for profile usage with cache pool.
List cache-pools as first option for dm-cache as it provides
better performance and more functionality over cachevols.
Not all libc (like musl, uclibc dietlibc) libraries support full symbol
version resolution in runtime like glibc.
Add support to not generate symbol versions when compiling against them.
Additionally libdevmapper.so was broken when compiled against
uclibc. Runtime linker loader caused calling dm_task_get_info_base()
function recursively, leading to segmentation fault.
Introduce --with-symvers=STYLE option, which allows to choose
between gnu and disabled symbol versioning. By default gnu symbol
versioning is used.
__GNUC__ check is replaced now with GNU_SYMVER.
Additionally ld version script is included only in
case of gnu option, which slightly reduces output size.
Providing --without-symvers to configure script when building against
uclibc library fixes segmentation fault error described above, due to
lack of several versions of the same symbol in libdevmapper.so
library.
Based on:
https://patchwork.kernel.org/project/dm-devel/patch/20180831144817.31207-1-m.niestroj@grinn-global.com/
Suggested-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Looks like there was some missed versioning increase during devel.
So with kernel >= 4.18 version 1.19 is enough to look like 1.20
However backported 1.19 targets seems to not provide all
the capabilities.
Test has to use PV with suffix pv[0..9] otherwise
it's ignored by test suite filter.
Better fix for VG names to use prefix LVMTEST.
Skip the test for runs without LVM_TEST_DEVDIR != /dev
Always use PREFIX for vg header - all tests must use this prefix,
VGs without are not allowed.
Modify pv_symlink test - as the test was checking unsupportable
combination - since lvm2 commands withing testsuite are only
allowed to manipulate with /dev/mapper/LVMTESTXXXX path -
nothing else allowed and fails on being filtered.
Added comment the 'lvs' already initiates dmeventd
Note: we don't have any query mechanism to check if dmeventd
is already running except access of socket which basically
starts dmeventd if it's not running.
For determinist test results lvm2/dm service shall not be present
and running in the system as it may randomize test results.
In case they are found present, this test ends with warning (not failure).
Some older instancies of 'mdadm' opened legs in RW and
closed and opened again and expected exlusive access.
But here udev rule can be fired - so on these versions
slow down whole mdadm runtime by using strace, to
give system a bit more time to finish udev rule.
Make check_lvmpolld_init_rq_count() more compatible with older gawk,
where some functionality was not working properly.
Also change 'not not' condition.
Fsadm wants to print its own error message when it can't detect
type of the filesystem on a block device.
Otherwise fsadm exits with no message on an unused block device.
When blocksize --getsize64 gives empty result we want to fallback
to ancient --getsize * --getss calculation (RHBZ #1942486).
Reported by: ajschorr@alumni.princeton.edu
Just like lvm command ignores 0/xxxx report from judging the status.
Avoid using infinite loop and limit report checking to 100 checks.
If it would need more - something is not right.
Our tests may result in producation of huge set of
invalid links in /dev/disk directory depeding on version
of udev and various kinds of failures.
Also we happen to invoke some on-system pvscans generating
local /etc/lvm/archive & backups - remove them when
test is finished.
Try to synchronize with colliding udev.
Also retry once if there is some failure with some
sleep between next retry.
Use oflag=direct for wipping without wipefs.
Combination of throttling and slowed device is a bit faster.
Also add FIXME about the mutliple spawn polling processing
when activating invidual LV for a pvmove.
Use for testing new mdadm_create aux wrapper.
Place functionality into a 2 pass loop - one for 'auto' other for 'start'.
Share same tests between raid level 0 and level 1 version of raid.
Add generic wrapper for mdadm --create which takes
normal 'mdadm' args - but allows us to handle differences of
mdadm usage across various version of mdadm tool.
Resulting MD device is availalble in $(< MD_DEV).
Automatic cleaning is made through cleanup_md_dev
Calling of mdadm_create cleans previous MD dev if it exists.
When testing installed binaries on system, use more 'built-in'
predefined settings to usethem with their compiled-in values.
Also it's better to use same locking dir so the system's pvscan
is not unexpectedly interferring with test commands.
We have here some kind of catch-22 - since older kernels do
use 'resync' while new 'recover' for initial raid synchronization.
So now - how do we recognize in which state of raid we are.
ATM seems to be simplest to simply keep disabled droping of primary raid
leg unless we are in sync.
FIXME: we should add a target version check and enable removal
Function is not having the best name since it does check
no just raid LVs to be in sync.
Restore the mirror percentage checking - although without retries,
since only raid target is currently known to need it - for other
types it would be ATM a bug to get inconsistent result.
Our new faster deps generation missed support for
buildirs != srcdir - as it can be usable to have
several builds from unchanged directory with sources.
Whiel waiting for raid to return consistent status,
use interruptible sleep - so command can break quickly.
Use lv_raid_status() to get percentage easily from status.
Always shift created virtual PVs on backing device by 1MiB
and leave 1MiB free space at the end of device.
This way the system doesn't see same PV headers at multiple devices.
Since lvm does support external users of thin-pool when thin devices
are managed outside it can be useful to support conversion to
thin pool from data and metadata LV without zeroing.
TransactionID will be 0 in lvm2 metadata.
lvconvert -Zn --thinpool vg/data --poolmetadata vg/meta
Renables usage of --type zero and --type error LVs to serve as
backend for _tdata device. Clearly not very useful in practice,
as it can't store any real data, but usable for some testing
and some sort of perfomance checking.
lvcreate --type zero -L1T -n pool vg
lvconvert --thinpool vg/pool
Will create a thin-pool with zero device backend.
Enabled extension/mixing of stripes/linears, error and zero
segtype LVs with stripes/linear, error and zero segtypes.
It is not very useful in practice, as the user cannot store any real
data on error or zero segtypes, but it may get some uses in
some scenarios where i.e. some portion of the device should not be
readable. Mixing of types happens on 'extent_size' level:
lvcreate -L1 -n lv vg
lvextend --type error -L+1 vg/lv
lvextend --type zero -L+1 vg/lv
lvextend --type linear -L+1 vg/lv
lvextend --type striped -L+1 vg/lv
lvs -o+segtype,seg_size vg
Note: when the type is not specified, the last segment type is
automatically selected.
It's also a small 'can of worms' since we can't tell LVs if
the LV is linear/error/zero or their mixtures. So the meaning behind
them may need some updates.
We already have this types of LV created i.e by:
vgreduce --removemissing --force
where missing LV segments have been replaced by either
error or zero segtype (lvm.conf).
TODO: it might be worth adding a message while such device is activated.
Add some extra code to handle differently sized thin-pool
from thin-pool data volume.
ATM this can't really happen, but once we start to use multiple
commits while resizing stacked LV, we may actually get into
the position, where data LV has been already resized,
but thin-pool stayed with old size.
But for now - report difference as internal error.
Devices made only from 'error' target cannot be used,
but if the device is also combined from 'zero' target
the same rule can be applied as such device cannot be used.
Just like with other segtype use this function to get whole
raid status info available per a single ioctl call.
Also it nicely simplifies read of percentage info about
in_sync portion of raid volume.
TODO: drop use of other calls then lv_raid_status call,
since all such calls could already use status - so it just
adds unnecessary duplication.
Reduce ioctl count and avoid separate info check,
when we can get the same info from status ioctl.
When devmanager calls return 0, then the exists value 0
means the reason of failure is missing device in table.
In such case we avoid stack trace.
Swap the flush parameter for the vdo status function
to match thin pool status.
Adding full filesystem sync, trying to fight with strange error from losetup:
losetup: loopa: failed to set up loop device: Resource temporarily unavailable
loop0: detected capacity change from 0 to 4096
loop_set_block_size: loop0 () has still dirty pages (nrpages=13)
Also reuse internal aux wipefs_a
When multiple polling tasks are watching for same LV, clearly
when some of them wins the game - other polling tasks will fail.
Improve the logic and report success if the merged LV is
actually not a merging origin anymore (since likely someone
else has already finished merging).
Although we support '0' interval - it's highly inefficent to
do so many scans in busy-loop.
So ATM raise minimal rescan time to 100ms.
TODO: revisit whole timing logic here as it does have some sideeffect
hiddent impact and can considerably eat CPU in some cases.
Reuse similar 'acceleration' as used for dependent volumes also
for snapshot - so when origin is being removed with all thick
snapshots, don't bother with individual 'COW' detachments
and write&commits, and when possible handle this all within
a single commit.
Move code for prompting about removed LV to a single function
and use it also to prompt for removal of origin and all its thick
snapshots and also when removing merging origin.
Function does handle postponed write_and_commit so there is
no 'in-flight' operation while waiting on [y|n] answer.
Compat code and handle unusual case, where
thin snapshot is also a 'thick snapshot origin' and such
snapshot gets merged into a thin origin.
However since now lv_is_visible() (which is complex function)
replaced &VISIBLE_LV check, the whole this check seems to be
no longer useful as sum of all 3 will always match??
Since cached LV is going to be removed together with its cache,
there is not much to gain if we try to flush cache first.
User may use 'vgcfgrestore' to get back origin + cache.
Assuming user is not using issue_discards.
When data are discarded after remove there is nothing to restore!
This change allows to futher reduce number of commits
during lvremove/vgremove.
This modification supports dynamically obtaining the value of PAGE_SIZE,
which is compatible with systems with PAGE_SIZE of (4K/64K)
Signed-off-by: wuguanghao <wuguanghao3@huawei.com>
There is really no practical reason to continue running
when we fail on allocation.
It seems we may need further fine frained errors, as for
some error type we simply need to exit ASAP, while
others may still produce usable results.
When lvremove/vgremove removes thin volumes with its thin-pool as well,
try to skip any updates of such thin-pool, so when everything properly
deactivates, there is no message send to this thin-pool and whole
thin-pool is removed with a single commit.
When generating list of processed LV, add thin-pool to the head of the
list, while other LVs are added on tail.
This makes it easier when removing many thin volumes, to recognize easily
when its thin-pool is also supposed to be removed.
Returning NULL for lv_committed is basically instant crash,
so instead try with passed LV instead.
It shouldn't matter as this is internall error path anyway,
but coverity should be happier.
Another step towards better automatic handling of backup,
and automatically setup needs_backup after commit.
In some next step we should reduce number of backups and takem
then only at the command finish with vg_committed content.
The correct test needs to actually check 'lv->snapshot' is not NULL,
so the 'find_snapshot()' can work.
Test lv_is_snapshot was actually irrelavant for this case.
Also initialize device_id.
With commit b44db5d1a7
needs to check allocated pointer for failed malloc().
Existing check was actually no checking anything so failing
malloc here would result in segfault (although with very
low chance to ever happen).
Match VG uuid just once per list of all LVs in VG.
TODO: maybe some more efficeint tree or hash could be better here,
but since it's used not so often, the total benefit is not so great,
so ATM just reducing amount of checked bytes.
Add Bob Jenkins hash function to get better working hash function,
which does genarate way less colisions (especially with similar
strings).
For a comparision also a kernel function used in DM kernel is include.
While it's better then our existing one, it's still far worse,
then Bob Jenkins hash.
Enhance hash perfomance by remembering the computed
hash value for the hashed node - this allows to speedup
lookup of nodes with the hash collision when
different keys map to the same masked hash value.
For the easier use 'num_slots' become 'mask_slots',
so we only add '1' in rare case of need of the original
num_slots value.
Also add statistic counters for hashes and print stats in
debug build (-DDEBUG) on hash wiping.
(so badly performing hash can be optimized.)
Use different 'hint' size for dm_hash_create() call - so
when debug info about hash is printed we can recognize which
hash was in use.
This patch doesn't change actual used size since that is always
rounded to be power of 2 and >=16 - so as such is only a
help to developer.
We could eventually use 'name' arg, but since this would have changed
API and this patchset will be routed to libdm & stable - we will
just use this small trick.
Just like with deactivation, call of 'lv_is_not_in_use()'
now has embeded report for inactivate LV.
Note: this patch cannot be backported to stable-2.02 - as
there lv_is_active() has 'cluster' meaning and differs from lvinfo().
When LV is deactivativate, we check for presence, and later
for some LV types also for being in use.
We can however do this check in 1 step for them a remove extra ioctl.
Add return value '2' to lv_check_not_in_use() to recognize LV is not
present.
Existing users were just testing for 0, so no change for them.
When parsing VG metadata we can create from a single config tree
also 'vg_committed' that is always created for writable VG.
This avoids extra uncessary step of serializing and deserilizing
just parsed VG.
Every vg_write stores new 'metadata' into precommitted slot.
For this step we use 'serialized buffer' to ascii metadata.
Instead of recreating this buffer after whole 'vg_write()' we
use this buffer instantly for creating of precommitted VG.
This has also the advantage of catching any problems with
reparsing of ascii metadata back to VG early before any write.
This patch postpones update of lvm metadata for each removed
LV for later moment depending on LV type.
It also queues messages to be printed after such write & commit.
As such there is some change in the behavior - although before
prompt we do make write&commit happens automatically in some
other error case we rather keep 'existing' state - so there
could be difference in amount of removed & commited LVs.
IMHO introduce logic is slightly better and more save.
But some cases still need the early commit - i.e. thin-removal
and fixing this needs some more thinking.
TODO: improve removal at least with the case of the whole thin-pool.
i.e. we can simply recognize removal of 'all LVs/whole VG'.
with fork and exec to avoid use of shell.
largely copied from lib/misc/lvm-exec.c
require lvmlockctl_kill_command to be full path
use lvm config instead of lvmconfig to avoid need for LVM_DIR
Make the generic "device is not usable" message from filter-usable
more specific in case the device is not usable because it's an LV.
(i.e. when scan_lvs=0)
When 'lv_info()' is called with &info structure,
the presence of node has to be checked from this structure.
Without this we were needlesly trying to look out 0:0 device.
When lvm2 calls archive() or backup() it can be useful to allow handling
break signal so the command can be interrupted at some consistent point.
Signal is accepted during processing these calls - and can be evaluated
later during even lengthy processing loops.
So now user can interrupt lengthy lvremove().
Taking backup with each removed LV is slowing down the process
considerable and is largerly uneeded. We are supposed to take
backup only on significant points and making sure the backup
is correct when the command is finished.
TODO: check how many other commands can be improved.
Use 'C' for alphasort - there is no need to use localized and slower
sorting for internal directory scanning.
Ensure on all code paths allocated dirent entries are released.
Optimize full path construction.
From commit 29abba3785 we have hopefully
fixed most of troubles for deps tracking we had in past - so retry
again.
Drop explicit configure.h from DEPS - as it's automatically gathered
by gcc dependency tracking anyway.
Drop the comment "This setting is no longer used." which
was printed just before the standard deprecation comment:
"This configuration option is deprecated."
When lvmconfig --typeconfig full printed a deprecated
entry it would attempt to print a non-existing
deprecation comment resulting in output like:
# (null) # This setting is no longer used.
This reverts commit 99b6173f10.
These tests are disabled with lvmlockd because they use
snapshots without an origin which is not permitted in a
shared vg.
user creates a file listing real devices they want
lvm tests to use, and sets LVM_TEST_DEVICE_LIST.
lvm tests can use these with prepare_real_devs
and get_real_devs.
Other aux functions do not work with these devs.
The LVM devices file lists devices that lvm can use. The default
file is /etc/lvm/devices/system.devices, and the lvmdevices(8)
command is used to add or remove device entries. If the file
does not exist, or if lvm.conf includes use_devicesfile=0, then
lvm will not use a devices file. When the devices file is in use,
the regex filter is not used, and the filter settings in lvm.conf
or on the command line are ignored.
LVM records devices in the devices file using hardware-specific
IDs, such as the WWID, and attempts to use subsystem-specific
IDs for virtual device types. These device IDs are also written
in the VG metadata. When no hardware or virtual ID is available,
lvm falls back using the unstable device name as the device ID.
When devnames are used, lvm performs extra scanning to find
devices if their devname changes, e.g. after reboot.
When proper device IDs are used, an lvm command will not look
at devices outside the devices file, but when devnames are used
as a fallback, lvm will scan devices outside the devices file
to locate PVs on renamed devices. A config setting
search_for_devnames can be used to control the scanning for
renamed devname entries.
Related to the devices file, the new command option
--devices <devnames> allows a list of devices to be specified for
the command to use, overriding the devices file. The listed
devices act as a sort of devices file in terms of limiting which
devices lvm will see and use. Devices that are not listed will
appear to be missing to the lvm command.
Multiple devices files can be kept in /etc/lvm/devices, which
allows lvm to be used with different sets of devices, e.g.
system devices do not need to be exposed to a specific application,
and the application can use lvm on its own set of devices that are
not exposed to the system. The option --devicesfile <filename> is
used to select the devices file to use with the command. Without
the option set, the default system devices file is used.
Setting --devicesfile "" causes lvm to not use a devices file.
An existing, empty devices file means lvm will see no devices.
The new command vgimportdevices adds PVs from a VG to the devices
file and updates the VG metadata to include the device IDs.
vgimportdevices -a will import all VGs into the system devices file.
LVM commands run by dmeventd not use a devices file by default,
and will look at all devices on the system. A devices file can
be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If
this file exists, lvm commands run by dmeventd will use it.
Internal implementaion:
- device_ids_read - read the devices file
. add struct dev_use (du) to cmd->use_devices for each devices file entry
- dev_cache_scan - get /dev entries
. add struct device (dev) to dev_cache for each device on the system
- device_ids_match - match devices file entries to /dev entries
. match each du on cmd->use_devices to a dev in dev_cache, using device ID
. on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID
- label_scan - read lvm headers and metadata from devices
. filters are applied, those that do not need data from the device
. filter-deviceid skips devs without MATCHED_USE_ID, i.e.
skips /dev entries that are not listed in the devices file
. read lvm label from dev
. filters are applied, those that use data from the device
. read lvm metadata from dev
. add info/vginfo structs for PVs/VGs (info is "lvmcache")
- device_ids_find_renamed_devs - handle devices with unstable devname ID
where devname changed
. this step only needed when devs do not have proper device IDs,
and their dev names change, e.g. after reboot sdb becomes sdc.
. detect incorrect match because PVID in the devices file entry
does not match the PVID found when the device was read above
. undo incorrect match between du and dev above
. search system devices for new location of PVID
. update devices file with new devnames for PVIDs on renamed devices
. label_scan the renamed devs
- continue with command processing
To better test actually fsadm in test suite - avoid setting
LVM_BINARY locally - since test setup already modifies
PATH to find test's lvm binary as the 1st. in path.
User use 'lvconvert -Zn --type vdo-pool' to convert an existing
vdo formated volume and skip lvm2 internal formating.
This however requires user is passing proper matching parameters.
For them user can use --profile|--metadataprofile option whos
support has been also enhanced.
TODO: add support to read values directly from formated volume.
In some cases we use 'creation' also during conversion.
Here it can be actually unwanted side effect we may remove
not just newly created layers - but also original converted LV.
So until we make clear how to properly revert from some errors
in middle of conversion, disable removal for any 'lvconvert' commands.
When lvdisplay was executed and thin snaphost has be merged to
thin origin and the operation has been postponed till devices
are closed, command crashed.
Check LV is COW before trying to check snapshot percentage.
When converting an existing LV to thin-pool,
user may now pass also '--errorwhenfull' option
like with 'lvcreate'.
Also recalculate chunksize when performace profile is
used with conversion (again matching lvcreate).
Adds missing flagging for uncropped metadata sizes.
Fix clearing persistent filter state when clearing all
the state from a label_scan.
label_scan reads devs and saves info in bcache, lvmcache,
and in the persistent filter. In some uncommon cases, an
lvm command wants to clear all info from a prior label_scan,
and repeat label_scan from scratch. In these cases, info
in lvmcache, bcache and the persistent filter all need to
be cleared before repeating label_scan.
By missing the persistent filter wiping, outdated persistent
filter info, from a prior label_scan, could cause lvm to
incorrectly filter devices that change between polling intervals.
(i.e. if the device changes in such a way that the filtering
results change.)
A case where lvm wants to do multiple label_scans is a
polling command (like lvconvert --merge), when lvmpolld
has been disabled, so that the command itself needs to
to do repeated polling checks.
Automatically figure out resizable layer in the LV stack and
resize it online.
Split check for reshaped raids and postpone removal of
unused space after finished reshaping after metadata archiving.
Drop warning about unsupported automatic resize of monitored thin-pool.
Currently there is not yet support for resize of writecache.
In past we had this control with use_lvmetad check for
pvscan --cache -aay
Howerer this got lost with lvmetad removal commit:
117160b27e
When user sets lvm.conf global/event_activation=0
pvscan service will no longer auto activate any LVs on appeared PVs.
Move extra md component detection into the label scan phase.
It had been in set_pv_devices which was deep within the vg_read
phase, which wasn't a good place (better to detect that earlier.)
Now that pv metadata info is available in the scan phase, the pv
details (size and device_hint) can be used for extra md checking.
Use the device_hint from the pv metadata to trigger a full md
component check if the device_hint begins with /dev/md.
Stop triggering full md component checks based on missing
udev info for a dev.
Changes to tests to reflect that the code is now detecting
md components in some test case that it wasn't before.
A cachevol can be forcibly detached when it's missing devices.
Also allow this if it's damaged/invalid and unrepairable.
This would be needed to recover data from the origin LV after
a cachevol is lost or damaged beyond repair.
In cases where lvconvert does not detect a fs block size on the
device, it falls back to choosing a writecache block size based
on the device's LBS and PBS (tries to match those.)
If the user specifies a writecache block size on the command
line (--cachesettings block_size=4096|512), lvconvert currently
fails and reports an error if the user-specified value does not
match the value lvconvert would have chosen based on LBS and PBS.
The purpose of allowing a user-specified value on the command line
is to override what lvconvert would otherwise do, so change this
to just print a warning that the user value does not match the
value that would be chosen based on the LBS/PBS, and then take
the user-specified value as the writecache block size.
Current allocation limitation requires to fit metadata/log LV on
a single PV. This is usually not a big problem, but since
thin-pool and cache-pool is using this for allocating extents
for their metadata LVs it might be eventually causing errors
where the remaining free spaces for large metadata size is spread
over several PV.
When passing 'pvmove --name arg' try to automatically move
all associated dependencies with given LV.
i.e. 'pvmove --name thinpool vg vgnew'
moves all thins and data and metadata LV into a new VG vgnew.
Use update_pool_metadata_min_max() which is shared with
thin-pool metadata min-max updating.
Gives improved messages when converting volumes to metadata.
There is not much point to let allocate more then this size
even when i.e. converted LV is bigger then 16GiB (%extent_size)
ATM neither thin-pool nor cache-pool supports bigger metadata.
Initial support for thin-pool used slightly smaller max size 15.81GiB
for thin-pool metadata. However the real limit later settled at 15.88GiB
(difference is ~64MiB - 16448 4K blocks).
lvm2 could not simply increase the size as it has been using hard cropping
of the loaded metadata device to avoid warnings printing warning of kernel
when the size was bigger (i.e. due to bigger extent_size).
This patch adds the new lvm.conf configurable setting:
allocation/thin_pool_crop_metadata
which defaults to 0 -> no crop of metadata beyond 15.81GiB.
Only user with these sizes of metadata will be affected.
Without cropping lvm2 now limits metadata allocation size to 15.88GiB.
Any space beyond is currently not used by thin-pool target.
Even if i.e. bigger LV is used for metadata via lvconvert,
or allocated bigger because of to large extent size.
With cropping enabled (=1) lvm2 preserves the old limitation
15.81GiB and should allow to work in the evironement with
older lvm2 tools (i.e. older distribution).
Thin-pool metadata with size bigger then 15.81G is now using CROP_METADATA
flag within lvm2 metadata, so older lvm2 recognizes an
incompatible thin-pool and cannot activate such pool!
Users should use uncropped version as it is not suffering
from various issues between thin_repair results and allocated
metadata LV as thin_repair limit is 15.88GiB
Users should use cropping only when really needed!
Patch also better handles resize of thin-pool metadata and prevents resize
beoyond usable size 15.88GiB. Resize beyond 15.81GiB automatically
switches pool to no-crop version. Even with existing bigger thin-pool
metadata command 'lvextend -l+1 vg/pool_tmeta' does the change.
Patch gives better controls 'coverted' metadata LV and
reports less confusing message during conversion.
Patch set also moves the code for updating min/max into pool_manip.c
for better sharing with cache_pool code.
When detaching writecache, make the first stage send a message
to dm-writecache to set the cleaner option. This is instead of
reloading the dm table with the cleaner option set. Reloading
the table causes udev to process/probe the dm dev, which gets
stalled because of the writeback activity, and the stalled udev
in turn stalls the lvconvert command when it tries to sync with
udev events.
When getting writecache status we do not need to get
open_count or read_head info, which can cause extra steps.
In case legs of a raid0 LV are removed, the lvdisplay command still
reports 'available' though raid0 is not providing any resilience
compared to the other raid levels.
Also lvdisplay does not display '(partial)' in case of missing raid0
legs as oposed to the lvs command.
Enhance lvdisplay to report "NOT available" for any RaidLV type in case
too many legs are inaccessible hence causing data loss. I.e. any leg
for raid0, all for raid1, more than 1 for raid4/5, more than 2 for raid6
and in case of completely lost mirror groups for raid10.
Add test/shell/lvdisplay-raid.sh.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1872678
Read buffersize - 1 so the last byte is always 0.
Simplify init of 0 buffers.
Check snprintf result for error and report internal error as it could
happen only via bad compile parameters.
New VDO targets v6.2.3 corrects support for online rename of VDO device.
If needed if can be disable via new lvm.conf setting:
vdo_disabled_features = [ "online_rename" ]
When removing pool LV from a stacked LV setup, it's been possible
to leak _pmspare and such hidden LV then required manual
user removal.
Fix it by moving automatic removal into _lv_reduce().
When adding replacement raid+integrity images (lvconvert --repair
after a raid image is lost), various errors can cause the function
to exit with an error. On this exit path, the function attempts
to revert new images that had been created but not yet used. The
cleanup failed to account for the fact that not all images needed
to be reverted.
Since commit 77fdc17d70 always include
log_len size into needed extents - however now we may need sometimes
more extents then necessary - mainly when multiple PVs are involved
into allocation.
Add logs_still_needed into calculation of sufficient_pes_free()
When a writecache sublv or an integrity metadata sublv
are partial (missing a dev), set the partial flag on
the upper level LV also, as is done for other sublvs.
Fix the two-step writecache detach in commit c32d7fed4f.
In the case of uncache, the cachevol is removed after
detaching the writecache. When the detach is finished
in the second step, the remove must wait until then.
When using cache with a cachevol, the cache_check tool was
not being run on the cache metadata during activation.
cache_check clears the needs_check flag in the cache
metadata, so if the flag was set due to an unclean
shutdown, the activation would fail.
When 'fsadm resize vg/lv' is used without size, it should just
resize filesystem to match device - but since we now check
for unbound variable in bash - the previous usage no longer
works and needs explicit check.
Verify that corruption is corrected for raid levels other
than raid1. For other raid levels, attempt to corrupt the
given file pattern on each underlying device, since we don't
know which device contains the file being corrupted.
This ensures that corruption is actually be introduced
when testing the other raid levels.
Verify that corruption is being corrected by checking
the integritymismatches count is non-zero for the raid LV,
which includes the total from all images (since we don't
know which image will have the corruption.)
Each integrity image in a raid LV reports its own number
of integrity mismatches, e.g.
lvs -o integritymismatches vg/lv_rimage_0
lvs -o integritymismatches vg/lv_rimage_1
In addition to this, allow the total number of integrity
mismatches from all images to be displayed for the raid LV.
lvs -o integritymismatches vg/lv
shows the number of mismatches from both lv_rimage_0 and
lv_rimage_1.
Enhance VDO man page with description of memory usage
and space requirements chapter.
Remove some unneeded blank lines in man page.
Use more precise terminology.
Correct examples since cpool and vpool are protected names.
filters needing io weren't being run because bcache
wasn't set up. Read the first 4k of the device
before doing filtering or reading ondisk structs to
reduce reads.
It's possible for a machine with a non-4k page size
to create a PV with an mda_header at an offset other
than 4k. Fix pvck --dump to work with these other
mda offsets. pvck --repair will write a new first
mda at 4096 but lvm with other page sizes will work
with this.
The args for pvcreate/pvremove (and vgcreate/vgextend
when applicable) were not efficiently opened, scanned,
and filtered. This change reorganizes the opening
and filtering in the following steps:
- label scan and filter all devs
. open ro
. standard label scan at the start of command
- label scan and filter dev args
. open ro
. uses full md component check
. typically the first scan and filter of pvcreate devs
- close and reopen dev args
. open rw and excl
- repeat label scan and filter dev args
. using reopened rw excl fd
- wipe and write new headers
. using reopened rw excl fd
Older blockdev tool return failure error code with --help,
and since now the tool abort on command failure, lets
detect missing --getsize64 support directly by running
command and check if it returns something usable.
It's likely very hard to have the system with
such old blockdev tool and newer lvm2 compiled.
Since 'kilobytes' could be seen in 2 way - SI as '1000',
while all programmers sees it as '1024' - switch to
commonly acceptted KiB, MiB....
Resolves RHBZ 1496255.
Test case where filesystem has been corrected via fsck.
In such case fsck returns '1' as success and should be
handled in a same way as '0' since fs is correct.
Set more secure bash failure mode for pipilines.
Avoid using unset variables.
Enhnace error reporting for failing command.
Avoid using error via 'case..esac || error'.
In some cases the dev size may not have been read yet
in set_pv_devices(). In this case get the dev size
before comparing the dev size with the pv size.
Restructure the pvscan code, and add new temporary files
that list pvids in a VG, used for processing PVs that
have no metadata.
The new temp files, in /run/lvm/pvs_lookup/<vgname>, allow a
proper pvscan --cache to be done on PVs that have no metadata.
pvscan --cache <dev> is only supposed to read <dev>, but when
<dev> has no metadata, this had not been possible. The
command had to fall back to scanning all devices to read all
VG metadata to get the list of all PVIDs needed to check for
a complete VG. Now, the temp file can be used in place of
reading metadata from all PVs on the system.
To read the lvm headers and set dev->pvid if the
device is a PV. Difference from label_scan_ functions
is this does not read any vg metadata or add any info
to lvmcache.
Filtering in label_scan was controlled indirectly by
the fact that bcache was not yet set up when label_scan
first ran. The result is that filters that needed data
would not run and would return -EAGAIN, which would
result in the dev flag FILTER_AFTER_SCAN being set.
After the dev header was read for checking the label,
filters would be rechecked because of FILTER_AFTER_SCAN.
All filters would be checked this time because bcache
was now set up, and the filters needing data would
largely use data already scanned for reading the label.
This design worked but is hard to adjust for future
cases where bcache is already set up.
Replace this method (based on setting up bcache, or not)
with a new cmd flag filter_nodata_only. When this flag
is set filters that need data will not run. This allows
the same label_scan behavior when bcache has been set up.
There are no expected changes in behavior.
Touch of stack allocation validated given size with rlimit
and if the reserved_stack was above rlimit, its been completely
ignored - now we will always touch stack upto rlimit/2 size.
cmd context has 'threaded' value that used be set
by clvmd - and allowed proper memory locking management.
Reuse same bit for dmeventd.
Since dmeventd is using 300KiB stack per thread,
we will ignore any user settings for allocation/reserved_stack
until some better solution is find.
This avoids crashing of dmevend when user changes this value
and because in most cases lvm2 should work ok with 64K stack
size, this change should not cause any problems.
Check that type is always defined, if not make it explicit internal
error (although logged as debug - so catched only with proper lvm.conf
setting).
This ensures later type being NULL can't be dereferenced with coredump.
DM tree keeps track of created device while preloading a device tree.
When fail occures during such preload, it will now try to remove
all created and preloaded device. This makes it easier to maintain
stacking of device, since we do not need to check in-depth for
existance of all possible created devices during the failure.
Since 'BLKZEROOUT' streams out more block at once, at can easily
zero-out larger set of blocks after 1st. failing one.
So the test is adapted to fully 'hide' swap header under error target.
When ERR_DEV and ZERO_DEV are used, they are automatically
taken down when the last user no longer needs them,
so hide them from 'forgotten' device check.
As there could be few invokes of stacktrace, avoid
repeatedly display logs from commands.
So after first display rename debug.log* -> debug_log
so the file still can remain for reading in test dir.
Since BLKZEROOUT ioctl should be supposedly fastest
way how to clear block device start using this ioctl
for zeroing a device. Commonly we do zero typically
small portion of a device (8KiB) - however since we now
also started to zero metadata devices, in the case
of i.e. thin-pool metadata this can go upto ~16GiB
and here the performance starts to be noticable.
Since dev_set_bytes() now closes dev on error path itself,
remove this unneeded call now (introduced few commits back
in history thus removing comment from WHATS_NEW)
Since lvm2 normally block signals during protected
phase where it does not want to be interrupted.
Support interruptible processing when allowed
in section between sigint_allow() ... sigint_restore())
and let the 'io_getenvents()' finish with EINTR.
When bcache tries to write data to a faulty device,
it may get out of caching blocks and then just busy-loops
on a CPU - so this check protects this by checking
if there is already max_io (~64) errored blocks.
Call _wait_all() which does check whether there is still
some pending IO before sleep. Otherwise it may happen
our submitted IO operations have been already dispatched
and this call then endlessly waits for IO which are all done.
This can be reproduced when device returns quickly errors
on write requests.
When detaching a writecache, use the cleaner setting
by default to writeback data prior to suspending the
lv to detach the writecache. This avoids potentially
blocking for a long period with the device suspended.
Detaching a writecache first sets the cleaner option, waits
for a short period of time (less than a second), and checks
if the writecache has quickly become clean. If so, the
writecache is detached immediately. This optimizes the case
where little writeback is needed.
If the writecache does not quickly become clean, then the
detach command leaves the writecache attached with the
cleaner option set. This leaves the LV in the same state
as if the user had set the cleaner option directly with
lvchange --cachesettings cleaner=1 LV.
After leaving the LV with the cleaner option set, the
detach command will wait and watch the writeback progress,
and will finally detach the writecache when the writeback
is finished. The detach command does not need to wait
during the writeback phase, and can be canceled, in which
case the LV will remain with the writecache attached and
the cleaner option set. When the user runs the detach
command again it will complete the detach.
To detach a writecache directly, without using the cleaner
step (which has been the approach previously), add the
option --cachesettings cleaner=0 to the detach command.
Reorganize checking the device args for pvcreate/pvremove
to prepare for future changes. There should be no change
in behavior. Stop the inverted use of process_each_pv,
which pulled in a lot of unnecessary processing, and call
the check functions on each device directly.
Since we detect already transaction if before starting
to build dm tree - this extra check is a duplicate
that would only capture very tiny 'race' and we later
validate transaction_id with suspended snapshot origin.
Introduce structures lv_status_thin_pool and
lv_status_thin (pair to lv_status_cache, lv_status_vdo)
Convert lv_thin_percent() -> lv_thin_status()
and lv_thin_pool_percent() + lv_thin_pool_transaction_id() ->
lv_thin_pool_status().
This way a function user can see not only percentages, but also
other important status info about thin-pool.
TODO:
This patch tries to not change too many other things,
but pool_below_threshold() now uses new thin-pool info to return
failure if thin-pool cannot be actually modified.
This should be handle separately in a better way.
LVM2 is distributed under GPLv2 only. The readline library changed its
license long ago to GPLv3. Given that those licenses are incompatible
and you follow the FSF in their interpretation that dynamically linking
creates a derivative work, distributing LVM2 linked against a current
readline version might be legally problematic.
Add support for the BSD licensed editline library as an alternative for
readline.
Link: https://thrysoee.dk/editline
Cover the case where two copies of metadata have the
same seqno but different checksums. Also elaborate
on an existing fixme in the code for this case, since
we should be doing something better for this case.
This had been uncovering an issue with reopening
fds in readwrite mode.
There's a bug when lvpoll attempts to write new hints,
related to the fact that lvpoll does not follow the same
scanning process as standard commands.
Fix by disabling the use of hints in lvpoll. We may want
to renable hints in lvpoll in a way that they can be used,
if valid, but not updated if they don't exist or are invalid.
Improve error response and reporting, when creating thin snapshots.
If the thin pool kernel metadata already have device with ID lvm2
tries to create, give more meanigful error message and also properly
restore transaction id to the value known to thin-pool in this case.
Before it's been possible to divert by one from kernel TID value,
and lvm2 stacked delete message for such thin device.
Since ATM kernel does not support this operation,
disable 'lvrename' of an active vdopool.
As a workaround, user may simply deactivate, rename and activate.
This test seems to be hitting some corner case in handling
out-of-metadata space condintion in thin-pool.
Add few more aid notes and functionality.
Also add missing '|| true' with now direct-IO dd command.
Shorten running time of the test.
Fix some issues in invoked resizing script to it returns
correct return code and dmeventd can be a little bit quicker
in this test.
When user tries to extend vdo pool - he needs to go always
at least by 1 full VDO slab (defined as vdo_slab_size_mb).
To avoid all trouble around find 'workable' size - lvm2 automatically
increases the passed (or by --use-policies calculated) extension size
(and informs a user about sometimes possibly large increase as slab
size can go upto 32GiB)
With VDO users need to always 'think-big' anyway and expect such
operation to be in GiB domain range.
When thetable reload fails during suspend() - we were only calling
plain resume() - and this will reload only those devices,
which were left suspend, but will not try to restore
metadata state according to lvm2 reverted metadata.
So if we were reloading device tree - we have restored
only top-level LV and rest of reverted device manipulation
were left alone and possibly mismatched what is in committed
metadata.
FIXME: There are several cases were such revert will likely not work
properly anyway as some operation are currenly handled in single commit,
while they need multiple commits, but it's step towards better correctness.
At least we catch there errors now earlier.
When loop can't handle sector-size option - failure caused double fail
for access of unbound variable
Also fix expression for 'rm' and remove loops after loop release.
If the test runs of loop device backend with 512 sectors,
xfs selects this smaller sector size and then data do not fit
(we would need -l9 with most of 'raids').
With 4K sectors data always fits.
Shorten and make the test easily readable by moving same code into
function and removed one duplicated test for 512,4096 combination.
Always use scsi_debug - since default ramdisk or loop device backend
is unpredictible.
lvm opens devices readonly to scan them, but
needs to open then readwrite to update the metadata.
Previously, the ro fd was closed before the rw fd
was opened, leaving a small gap where the dev was
not held open, and during which the dev could
possibly change which storage it referred to.
With the bcache_change_fd() interface, lvm opens a
rw fd on a device to be written, tells bcache to
change to the new rw fd, and closes the ro fd.
. open dev ro
. read dev with the ro fd (label_scan)
. lock vg (ex for writing)
. open dev rw
. close ro fd
. rescan dev to check if the metadata changed
between the scan and the lock
. if the metadata did change, reread in full
. write the metadata
Add a "device index" (di) for each device, and use this
in the bcache api to the rest of lvm. This replaces the
file descriptor (fd) in the api. The rest of lvm uses
new functions bcache_set_fd(), bcache_clear_fd(), and
bcache_change_fd() to control which fd bcache uses for
io to a particular device.
. lvm opens a dev and gets and fd.
fd = open(dev);
. lvm passes fd to the bcache layer and gets a di
to use in the bcache api for the dev.
di = bcache_set_fd(fd);
. lvm uses bcache functions, passing di for the dev.
bcache_write_bytes(di, ...), etc.
. bcache translates di to fd to do io.
. lvm closes the device and clears the di/fd bcache state.
close(fd);
bcache_clear_fd(di);
In the bcache layer, a di-to-fd translation table
(int *_fd_table) is added. When bcache needs to
perform io on a di, it uses _fd_table[di].
In the following commit, lvm will make use of the new
bcache_change_fd() function to change the fd that
bcache uses for the dev, without dropping cached blocks.
Use new SKIP_WITH_LOW_SPACE and set higher requirement for free space.
But still this test can't run on system's tmpfs directories -
as they typically provide less then 2G of space and when the test
runs there it also provisioning for all READ pages!)
BRD (ramdisk) device should work.
Extend a _wait_recalc() loop for slower hw.
When creating large raid which do not need to be fully synchronized use
them on delay devices - so even less data needs read/write.
Remove unneeded lvchange as lvcreate is already leaving LV inactive.
Replace printf with awk as generator.
mm
Test can set individually a higher value for required free space on
storage.
Note: it is not fully reliable since when 'brd' (ramdisk) device is used
this free space value is rather meanigul, but it might help
in case where a real filesystem is doing back-end for test devices.
When the test exhausts all the available free space on storage device,
then during the fail we cannot write anything as well - yet
the teardown needs to finish it's work - otherwise we leave
basicaly overfilled filesystem for all remaining tests.
In cases where internal functions like zero_dev, delay_dev pass-in
invalid parameter so resulting table can't work, resume at least
previous table line before failing out - so the cleaning process
later on is not stuck waiting on a suspended device.
While the previous commit c9b40083fc
decresed version to 1.19 for using bigger datasets, it's not
been quite right - so from our bb machine it looks like
bigger metadata consumption started with 1.19 and kernel 4.18
(fc27)
Use bigger volume and slowdown writing to cache device.
This allows more simple to reach 'dirty' state.
Also document exactly 1 SIGINT has to fire aborting of flushing.
During removal of a lot of locking code the signal blocking got lost
and signal processing got broken leading to unpredictable
behavior of i.e. activation code the can get interrupted in the
middle of DM table processing.
lvm2 code always expects signals are blocked while lock is held
unless it is explictelly placed into section of:
sigint_allow();....;sigint_restore();
For checking catched interrupt there is sigint_catched();
Metadata size was calculated correctly only for raids.
Fixes problem for crash during lvcreate when thin-pool was created
on a VG where remaining free space had the size to only fit a single
metadata LV and not also its _pmspare.
Lvcreate crashed with this assert message:
lvcreate: metadata/pv_map.c:198: consume_pv_area: Assertion `to_go <= pva->count' failed.
Aborted (core dumped)
TODO: there is probably to large overload of several alloc_handle
variables.
Reported-by: Wu Guanghao<wuguanghao3@huawei.com>
Reported-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Cow may not be a snapshot type, the return value of origin_from_cow(cow) may be NULL
Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
LV may not be a snapshot type, the return value of find_snapshot(lv) may be NULL.
Here, we will call stack if LV is not a snapshot type.
Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
The return value of top_level_lv_name() may be NULL, so we should
check return value of top_level_lv_name before calling
strcmp(lv->name, top_level_lv_name(vg, lv_name)).
Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
When using cscope to read code, it will generate below 3 files for speedup
cross-refer: cscope.files, cscope.in.out, cscope.po.out
The .gitignore only contains "/cscope.out". It a little bit messy when
executing 'git status', and other git commands.
This patch add all cscope generated files in .gitignore.
Signed-off-by: Zhao Heming <heming.zhao@suse.com>
When using --use-policy for automatic extension of thin-pool,
the extension of thin-pool's metadata itself can actually take
some extra space.
Since I'm not aware of exact compensation formula, add just
1% extra to calculated amount and hope it fits.
Wanted target is to always have usable thin-pool that fits
bellow pool_metadata_min_threshold().
Since we query on regular code these:
lv_raid_has_integrity()
lv_has_integrity_recalculate_metadata()
without prior checking for lv_is_raid() - these 'return 0' should
not use <stacktrace> as they are expected.
Correcting rounding rules for percentage evaluation.
Validate supported range of percentage.
(although ranges are already validated earlier on code path)
Enable compilation of vdo and writecache support as internaly
supported segment types by default.
For disabling use:
--with-vdo=none
--with-writcache=none
For proper checking of extension progress require version 1.15
It looks with older versoin extension happens during very slow
resume within lvm command - although speed is still somewhat slow
with latest version.
This is probably somewhat experimantal patch - but when i.e. raid device
is just extend, there should not be a technical need for flush,
unless the target would stricly need it. It should allow faster
processing of lvm command not being blocked by possibly longer flush.
Since we do not support rimage & rmeta for snapshots - we can
avoid quering for -cow devices and add them as origin_only -
since their snapshots (-cow) could have never existed.
This redumes several ioctl operation during table preloading.
Use '0' for error and '1' as success.
Also drop INTERNAL_ERROR from path - as this error
is ATM used for invalid devices.
(i.e. test lvconvert-raid1-split-trackchanges.sh)
Speed-up a bit the first synchronization with just 50ms write delay,
but later set also delay on read to slowdown lvextend.
FIXME: there are still things to look at:
0 229376 raid raid1 2 AA 229376/229376 idle 0 0
0 229376 raid raid1 2 AA 0/229376 frozen 0 0 -
0 262144 raid raid1 2 AA 229376/262144 repair 0 0 -
0 262144 raid raid1 2 AA 229376/262144 repair 0 0 -
0 262144 raid raid1 2 AA 245888/262144 repair 0 0 -
Just like we have 'writeerror_dev' supporting creation of device
which 'readable' segment and segments where write will fail we
have now support for delay zero mappings.
This is useful if we want to 'fake' large writing areas where we do
not really care about the actual 'disk' content - since we test
operation logic and it doesn't matter we read and write zeroes.
With combination with 'delay' target we can create specific mappings
and avoid using large memory areas of ramdisk.
On test system with 'default' filter (aka accept all) test
after enabling device can suffer from automatic system
activation - so for created LVs setup skipping this automatic
activation. This should prevent getting LVs into table
with pvscan service.
Since we declare dev_name in lib/device/device.h
and pvs in commands.h
rename local dev_name to device_name
and pvs to pvs_list to prevent shadowing warning.
m
Switch remaining zero sized struct to flexible arrays to be C99
complient.
These simple rules should apply:
- The incomplete array type must be the last element within the structure.
- There cannot be an array of structures that contain a flexible array member.
- Structures that contain a flexible array member cannot be used as a member of another structure.
- The structure must contain at least one named member in addition to the flexible array member.
Although some of the code pieces should be still improved.
While normally the 'mmap' file reading is better utilizing resources,
it has also its odd side with handling errors - so while we normally
use the mmap only for reading regular files from root filesystem
(i.e. lvm.conf) we can't prevent error to happen during the read
of these file - and such error unfortunately ends with SIGBUS error.
Maintaing signal handler would be compilated - so switch to slightly
less effiecient but more error resistant read() functinality.
reproducible steps:
1. vgcreate vg1 /dev/sda /dev/sdb
2. lvcreate --type raid0 -l 100%FREE -n raid0lv vg1
3. do remove the /dev/sdb action
4. lvdisplay show wrong 'LV Status'
After removing raid0 type LV underlying dev, lvdisplay still display
'available'. This is wrong status for raid0.
This patch add a new function raid_is_available(), which will handle
all raid case.
With this patch, lvdisplay will show
from:
LV Status available
to:
LV Status NOT available (partial)
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.com>
Signed-off-by: Zhao Heming <heming.zhao@suse.com>
It's better to set most of option as 'commented' with some
documented defaults instead of providing strict values.
This has the advantage we can eventually 'change' defualts
and get them working in future. Otherwise once the setting
is stored in lvm.conf in /etc, such setting has strictly
defined value and that can be only change with file update.
Allow the optional '--type raid1' to be included in the lvconvert
command when adding or removing raid images with integrity.
It does not change the meaning of the command (specifying a type
that matches the current type is redundant but generally allowed.)
merge.c:_check_lv_segment() was checking regionsize vs. mirrored LV size on
any 'mirror/raid1/raid10' segment type including type 'mirrored' mirror logs.
Avoid the check only for 'mirrored' mirror logs to allow conversion from log
type 'disk' with regionsize > mirror log SubLV size.
As we disabled support for 'mirrored' mirror logs with
commit e82303fd6a which still conditionally
allows to enable it via global/support_mirrored_mirror_logs=1,
patch is mandatory for all distributions.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1712983
Currently lvm2 is not wiping signatures when creating 'metadata' volumes
and raid _rmeta was the only exception - so make the behavior consistent
with other metadata devices and drop wiping ATM.
Drop also some extra debug since they are now more explanatory in
wipe_lv() function.
Also note - although lvm2 now does not wipe signatures - the error
from such wipping used to be actually 'ignored' before wipe_lv()
started to return error (with recent commit) and raid creation
continued with 'unzeroed' metadata device.
TODO: Several issues to resolve:
1. We may want to flip to wipping with all LVs (in that case we need to
support passing --yet & --force).
2. Also we may want to clear whole metadata device - however current
function is also used for wipping i.e. snapshot COW device which
is likely not a good candidate for full device zeroing.
We may also need to think about better logic when extent size is
enforcing very large LVs, when only a small portion of LV is ever
being used.
3. Using TRIM instead of zeroing metadata device might be worth to
implement.
mm
When converting volume to pool LV use also wiping of other signatures.
For writecache & pool conversion support --yet and --force
to bypass prompting for signature wiping.
For writecache drop unneded zero_sectors.
Note: currently we have lvconvert doing convertion and prompting
for confirmation of conversion - and then again wipe_lv() prompts
for removing i.e. filesystem signature - we should unify this
prompting into 1 message - althought the 'filesystem' discovery
needs active volume - while the 1st. conversion prompt can
work without active converted volume.
To avoid polution of metadata with some 'garbage' content or eventualy
some leak of stale data in case user want to upload metadata somewhere,
ensure upon allocation the metadata device is fully zeroed.
Behaviour may slow down allocation of thin-pool or cache-pool a bit
so the old behaviour can be restored with lvm.conf setting:
allocation/zero_metadata=0
TODO: add zeroing for extension of metadata volume.
Failure in wiping/zeroing stop the command.
If user wants to avoid command abortion he should use -Zn or -Wn
to avoid wiping.
Note: there is no easy way to distinguish which kind of failure has
happend - so it's safe to not proceed any futher.
When initiated larger write request, it may have happened, bcache
got out of free chunks - fix the loop, that is supposed to wait
until next free chunk becomes avain available.
To create a new cache or writecache LV with a single command:
lvcreate --type cache|writecache
-n Name -L Size --cachedevice PVfast VG [PVslow ...]
- A new main linear|striped LV is created as usual, using the
specified -n Name and -L Size, and using the optionally
specified PVslow devices.
- Then, a new cachevol LV is created internally, using PVfast
specified by the cachedevice option.
- Then, the cachevol is attached to the main LV, converting the
main LV to type cache|writecache.
Include --cachesize Size to specify the size of cache|writecache
to create from the specified --cachedevice PVs, otherwise the
entire cachedevice PV is used. The --cachedevice option can be
repeated to create the cache from multiple devices, or the
cachedevice option can contain a tag name specifying a set of PVs
to allocate the cache from.
To create a new cache or writecache LV with a single command
using an existing cachevol LV:
lvcreate --type cache|writecache
-n Name -L Size --cachevol LVfast VG [PVslow ...]
- A new main linear|striped LV is created as usual, using the
specified -n Name and -L Size, and using the optionally
specified PVslow devices.
- Then, the cachevol LVfast is attached to the main LV, converting
the main LV to type cache|writecache.
In cases where more advanced types (for the main LV or cachevol LV)
are needed, they should be created independently and then combined
with lvconvert.
Example
-------
user creates a new VG with one slow device and one fast device:
$ vgcreate vg /dev/slow1 /dev/fast1
user creates a new 8G main LV on /dev/slow1 that uses all of
/dev/fast1 as a writecache:
$ lvcreate --type writecache --cachedevice /dev/fast1
-n main -L 8G vg /dev/slow1
Example
-------
user creates a new VG with two slow devs and two fast devs:
$ vgcreate vg /dev/slow1 /dev/slow2 /dev/fast1 /dev/fast2
user creates a new 8G main LV on /dev/slow1 and /dev/slow2
that uses all of /dev/fast1 and /dev/fast2 as a writecache:
$ lvcreate --type writecache --cachedevice /dev/fast1 --cachedevice /dev/fast2
-n main -L 8G vg /dev/slow1 /dev/slow2
Example
-------
A user has several slow devices and several fast devices in their VG,
the slow devs have tag @slow, the fast devs have tag @fast.
user creates a new 8G main LV on the slow devs with a
2G writecache on the fast devs:
$ lvcreate --type writecache -n main -L 8G
--cachedevice @fast --cachesize 2G vg @slow
To add a cache or writecache to a main LV with a single command:
lvconvert --type cache|writecache --cachedevice /dev/ssd vg/main
A cachevol LV will be allocated from the specified cache device,
then attached to the main LV. Include --cachesize to specify the
size of cachevol to create, otherwise the entire cachedevice is
used. The cachedevice option can be repeated to create a cachevol
from multiple devices.
Example
-------
A user has an existing main LV that they want to speed up
using a new ssd.
user adds the new ssd to the VG:
$ vgextend vg /dev/ssd
user attaches the new ssd their main LV:
$ lvconvert --type writecache --cachedevice /dev/ssd vg/main
Example
-------
A user has two existing main LVs that they want to speed up
with a new ssd.
user adds the new 16G ssd to the VG:
$ vgextend vg /dev/ssd
user attaches some of the new ssd to the first main LV,
using half of the space:
$ lvconvert --type writecache --cachedevice /dev/ssd
--cachesize 8G vg/main1
user attaches some of the new ssd to the second main LV,
using the other half of the space:
$ lvconvert --type writecache --cachedevice /dev/ssd
--cachesize 8G vg/main2
Example
-------
A user has an existing main LV that they want to speed up using
two new ssds.
user adds the new two ssds the VG:
$ vgextend vg /dev/ssd1
$ vgextend vg /dev/ssd2
user attaches both ssds their main LV:
$ lvconvert --type writecache
--cachedevice /dev/ssd1 --cachedevice /dev/ssd2 vg/main
Use libblkid to detect sector/block size of the fs on the LV.
Use this to choose a compatible writecache block size.
Enable attaching writecache to an active LV.
When lvconvert is used to remove raid images, we can
skip calling lv_add_integrity_to_raid(), which finds
nothing to do, but the the blocksize validation would
be called unnecessarily and trigger spurious errors.
The test was using a raid+integrity LV without
first waiting for the integrity sync, which could
cause the test to fail (depending on init speed)
where it depends on integrity to work in uninitialized
areas.
Also use cmp instead of diff.
pvck --dump headers reads the metadata text area
to compute the text metadata checksum to compare
with the mda_header checksum.
The new header_only will skip reading the metadata
text and not validate the mda_header checksum.
It's possible for a dev-cache entry to remain after all
paths for it have been removed, and other parts of the
code expect that a dev always has a name. A better fix
may be to remove a device from dev-cache after all paths
to it have been removed.
When either logical block size or physical block size is 4K,
then lvmlockd creates sanlock leases based on 4K sectors,
but the lvm client side would create the internal lvmlock LV
based on the first logical block size it saw in the VG,
which could be 512. This could cause the lvmlock LV to be
too small to hold all the sanlock leases. Make the lvm client
side use the same sizing logic as lvmlockd.
The lock adopt feature was disabled since it had used
lvmetad as a source of info. This replaces the lvmetad
info with a local file and enables the adopt feature again
(enabled with lvmlockd --adopt 1).
The --lock-opt autowait was dropped back in 9ab6bdce01,
and attempting to specify it has quite an opposite effect:
no waiting is done, which makes the unit almost useless.
dm-integrity stores checksums of the data written to an
LV, and returns an error if data read from the LV does
not match the previously saved checksum. When used on
raid images, dm-raid will correct the error by reading
the block from another image, and the device user sees
no error. The integrity metadata (checksums) are stored
on an internal LV allocated by lvm for each linear image.
The internal LV is allocated on the same PV as the image.
Create a raid LV with an integrity layer over each
raid image (for raid levels 1,4,5,6,10):
lvcreate --type raidN --raidintegrity y [options]
Add an integrity layer to images of an existing raid LV:
lvconvert --raidintegrity y LV
Remove the integrity layer from images of a raid LV:
lvconvert --raidintegrity n LV
Settings
Use --raidintegritymode journal|bitmap (journal is default)
to configure the method used by dm-integrity to ensure
crash consistency.
Initialization
When integrity is added to an LV, the kernel needs to
initialize the integrity metadata/checksums for all blocks
in the LV. The data corruption checking performed by
dm-integrity will only operate on areas of the LV that
are already initialized. The progress of integrity
initialization is reported by the "syncpercent" LV
reporting field (and under the Cpy%Sync lvs column.)
Example: create a raid1 LV with integrity:
$ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo
Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB.
Logical volume "rr_rimage_0_imeta" created.
Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB.
Logical volume "rr_rimage_1_imeta" created.
Logical volume "rr" created.
$ lvs -a foo
LV VG Attr LSize Origin Cpy%Sync
rr foo rwi-a-r--- 1.00g 4.93
[rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02
[rr_rimage_0_imeta] foo ewi-ao---- 12.00m
[rr_rimage_0_iorig] foo -wi-ao---- 1.00g
[rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45
[rr_rimage_1_imeta] foo ewi-ao---- 12.00m
[rr_rimage_1_iorig] foo -wi-ao---- 1.00g
[rr_rmeta_0] foo ewi-aor--- 4.00m
[rr_rmeta_1] foo ewi-aor--- 4.00m
Make it possible to tear down VDO volumes with blkdeactivate if VDO is
part of a device stack (and if VDO binary is installed). Also, support
optional -o|--vdooptions configfile=file.
lvm2 supports thin-pool to be later used by other tools doing
virtual volumes themself (i.e. docker) - in this case we
shall not validate transaction Id - is this is used by
other tools and lvm2 keeps value 0 - so the transationId
validation need to be skipped in this case.
When vdopool is activated standalone - we use a wrapping linear device
to hold actual vdo device active - for this we can set-up read-only
device to ensure there cannot be made write through this device to
actual pool device.
Creating a snapshot was using a persistent LV lock
on the origin, so if the origin LV was inactive at
the time of the snapshot the LV lock would remain.
(Running lvchange -an on the inactive LV would
clear the LV lock.) Use a transient LV lock so it
will be dropped if it was not locked previously.
Prevent attaching writecache to an active LV until
we can determine the block size of the fs on the LV,
and use that to enforce an appropriate writecache
block size. Changing the block size under a mounted
fs can cause panic/corruption.
dmeventd is 'scanning' statuses in loop (most usually in 10sec
intervals) - and meanwhile it sleeps within:
pthread_cond_timedwait()
However this function call tends to wakeup sometimes a short amount of
time sooner - and our code still believe the 'right time' has not yet
arrived and basically for a moment 'busy-looped' on calling this
function - so for systems with 'clock_gettime()' present we obtain
time and we go 10ms to the future second - this avoids unneeded
repeated invocation of our time scheduling loop.
TODO: monitoring during 1 hour 'time-change'...
When formating VDO volume, the calculated amound of bits
for 'vdoformat --slab-bits' parameter was shifted by 2 bits
(calculated size was making 2MiB vdo_slab_size_mb value appear like if
user would be specifying only 512KiB)
Fixed by properly converting internal size_mb value to KiB.
Fix the anoying kernel message reported:
device-mapper: cache: 253:2: metadata operation 'dm_cache_commit' failed: error = -5
which has been reported while cachevol has been removed.
Happened via confusing variable - so switch the variable to commonly user '_size'
which presents a value in sector units and avoid 'scaling' this as extent length
by vg extent size when placing 'error' target on removal path.
Patch shouldn't have impact on actual users data, since at this moment
of removal all date should have been already flushed to origin device.
m
The previous patch improved read of pipe when lvm2 was looking
for default logical size, but we clearly must read pipe also
for -V case, when the logical size is already defined.
Still the place can be better to block only particular reshape
operations which ATM cause kernel problems.
We check if the new number of images is higher - and prevent to take
conversion if the volume is in use (i.e. thin-pool's data LV).
clang: it's supposedly impossible path to hit, as we should always
have origin_lv defined when running this path, but adding protection
isn't a big issue to make this obvious to analyzer.
Since _reserve_area() may fail due to error allocation failure,
add support to report this already reported failure upward.
FIXME: it's log_error() without causing direct command failure.
When _daemon_read()/_client_read() fails during the read,
ensure memory allocated withing function is also release here
(so caller does not need to care). Also improve code readbility a bit
a for same functionality use more similar code.
Although we expect min_chunk_size to be 32bit value, for
large size of caches it might be useful to do calcs 64bit.
So to avoid doing shift as signed 32bit - use unsigned 64bit
from the start.
reporting fields (-o) directly from kernel:
writecache_total_blocks
writecache_free_blocks
writecache_writeback_blocks
writecache_error
The data_percent field shows used cache blocks / total cache blocks.
Currently the error messages are not clear. This very easy to
guide user to execute "--removemissing --force", it is dangerous
and will make the LVs to be destroied.
Signed-off-by: Zhao Heming <heming.zhao@suse.com>
systemctl status corosync (version: 2.4.5) report error:
parse error in config: No interfaces defined
Signed-off-by: Zhao Heming <heming.zhao@suse.com>
Since VDO is also pool, the old if() case missed to know about this,
and executed unnecesserily initialization of cache pool variables.
This was usually harmless when using 'smaller' sizes of VDO pools,
but for big VDO pool size, we were reporting senseless messages
about big cache chunk sizes.
Until we resolve reshape for 'stacked' devices, we need to disable it.
So users can no longer reshape i.e. thin-pool data volumes, causing
ATM bad thin-pool problems.
When devices are created - we were not giving meaning error messages
when the failure happened on 'reload' part of creation.
With this patch we are now able to report both name and major:minor.
Enhancment is most visible with 'crypto' devices,
which are using 'secure' memory erase bit.
To write a new/repaired pv_header and label_header:
pvck --repairtype pv_header --file <file> <device>
This uses the metadata input file to find the PV UUID,
device size, and data offset.
To write new/repaired metadata text and mda_header:
pvck --repairtype metadata --file <file> <device>
This requires a good pv_header which points to one or two
metadata areas. Any metadata areas referenced by the
pv_header are updated with the specified metadata and
a new mda_header. "--settings mda_num=1|2" can be used
to select one mda to repair.
To combine all header and metadata repairs:
pvck --repair --file <file> <device>
It's best to use a raw metadata file as input, that was
extracted from another PV in the same VG (or from another
metadata area on the same PV.) pvck will also accept a
metadata backup file, but that will produce metadata that
is not identical to other metadata copies on other PVs
and other areas. So, when using a backup file, consider
using it to update metadata on all PVs/areas.
To get a raw metadata file to use for the repair, see
pvck --dump metadata|metadata_search.
List all instances of metadata from the metadata area:
pvck --dump metadata_search <device>
Save one instance of metadata at the given offset to
the specified file (this file can be used for repair):
pvck --dump metadata_search --file <file>
--settings "metadata_offset=<off>" <device>
using --settings:
mda_offset=<offset> mda_size=<size> can be used
in place of the offset/size that normally come
from headers.
metadata_offset=<offset> prints/saves one instance
of metadata text at the given offset, in
metadata_all or metadata_search.
This reverts commit 7474440d3b.
lvs can use the scanning optimization again since it has
been changed in:
"scanning: optimize by checking text offset and checksum"
After the VG lock is taken for vg_read, reread the mda_header
and compare the metadata text offset and checksum to what was
seen during label scan. If it is unchanged, then the metadata
has not changed since the label scan, and the metadata does not
need to be reread under the lock for command processing.
For commands that do not make changes (e.g. reporting), the
mda_header is reread and checked on one mda to decide if the
full metadata rereading can be skipped. For other commands
(e.g. modifying the vg) the mda_header is reread and checked
from all PVs. (These could probably just check one mda also.)
The kernel MD runtime requires region size to be larger than stripe size
on striped raid layouts, thus the dm-raid target's constructor rejects
such request.
This causes e.g. an 'lvcreate --type raid10 -i3 -I4096 -R2048 -n lv vg' to fail.
Avoid failing late in the kernel by enforcing region size to be
larger or equal to stripe size.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1698225
When pvcreate/pvremove prompt the user, they first release
the global lock, then acquire it again after the prompt,
to avoid blocking other commands while waiting for a user
response. This release/reacquire changes the locking
order with respect to the hints flock (and potentially other
locks). So, to avoid deadlock, use a nonblocking request
when reacquiring the global lock.
The scanning optimization can produce warnings from
'lvs' when run concurrently with commands modifying LVs,
so disable the optimization until it can be improved.
Without the scanning optimization, lvs will always
read all PVs twice:
1. read metadata from all PVs, saving it in memory
2. for each VG
3. lock VG
4. reread metadata from all PVs in VG, replacing metadata
saved from step 1
5. run command on VG
6. unlock VG
The optimization would usually cause step 4 to be skipped,
and PVs would be read only once.
Running the command in step 5 using metadata that was not
read under the VG lock is usually fine, except for the
fact that lvs attempts to validate the metadata by comparing
it to current dm state. If other commands are modifying dm
state while lvs is running, lvs may see differences between
metadata from step 1 and dm state checked during step 5,
and print warnings.
(A better fix may be to detect the concurrent change and
fall back to rereading metadata in step 4 only when needed.)
Since we fixed linking of proper version of 'libdevmapper' with
linking lvm2 plugin correctly - we already have correct function
available linked with internal lvm library.
So drop unneeded include of parsing function.
Avoid mem leaking hint on every loop continue and
allocate hint only when it's going to be added into list.
Switch to use 'dm_strncpy()' and validate sizes.
For dev_in_device_list() != 0 allocated 'devl' was
actually leaking - so instead allocate 'devl' only
when !dev_in_device_list() and indent code around.
Since we check for NULL pointers earlier we need
to be consistent across function - since the NULL
would applies across whole function.
When dropping 'mda' check - we are actually
already dereferencing it before - so it can't
be NULL at that places (and it's validated
before entering _read_mda_header_and_metadata).
dev_unset_last_byte() must be called while the fd is still valid.
After a write error, dev_unset_last_byte() must be called before
closing the dev and resetting the fd.
In the write error path, dev_unset_last_byte() was being called
after label_scan_invalidate() which meant that it would not unset
the last_byte values.
After a write error, dev_unset_last_byte() is now called in
dev_write_bytes() before label_scan_invalidate(), instead of by
the caller of dev_write_bytes().
In the common case of a successful write, the sequence is still:
dev_set_last_byte(); dev_write_bytes(); dev_unset_last_byte();
Signed-off-by: Zhao Heming <heming.zhao@suse.com>
When resizing 2 volumes like thin-pool and it's metadata and they
would be of a different type - command would be actually expecting
both LVs being of a same segtype - and would throw an error in
case they are different.
This patch fixes is by setting a new segtype from last segment of
2nd. extented device.
Also it fixes the possible 'percentage' extension setup that
might have been used for 'primary' volume - while the 'secondary'
LV always goes with direct size - as we do not support 'percentage'
setup for them
This affects maily usage of thin-pool where the extension of
thin-pool data size may also lead to extension of metadata size.
When running cluster test with clvmd, the actual 'monitoring'
happens in cluster - so the 'already monitored' message
is also logged within clvmd code and the command cannot
see such effect.
clvmd was incapable to report this information back to command
so it cannot be displayed this way.
Add 'lvs -o+seg_monitor' validation which also works in clustered mode.
Instead of checking all LVs in a VG - do just a direct copy of LVs
from the existing list ->segs_using_thin_lv.
TODO: maybe it could be better to expose seg_list to /tools...
Enhance lv_info with lv_info_with_name_check.
This 'variant' not only check existance if UUID in DM table
but also compares its DM name whether it's matching expected LV name.
Otherwise activation may 'skip' activation with rename in case the
DM UUID already exists, just device is different name.
This change make fairly easier manipulation with i.e. detached mirror
leg which ATM is using same UUID - just the LV name have been changed.
Used code was not able to run 'activation' (and do a rename) and just
skipped the call. So the code used to do a workaround and 'tried'
to deactivate such LV firts - this however work only in non-clvmd case,
as cluster was not having the lock for deactivated LV.
With this extended lv_info code will run 'activation' and will
synchronize the name to match expected LV name.
Patch extends _lv_info() with new paramter 'with_name_check',
which is later translated into 'name_check' argument for
_info_run() which in case of name mismatch evaluates the
check as if device does not exists.
Such call is only used in one place _lv_activate() which then
let activation run. All other invocation of _info() calls
are left intact.
TODO: fix mirror table manipulation (and raid)....
Avoid making more dbus calls to get information we already have. This
also avoids us getting an error where a dbus object representation is
being deleted by another process while we are trying to gather information
about it across the wire.
When a LV loses an interface it ends up getting removed and recreated.
This happens after the VGs have been processed and updated. Thus when
this happens we need to re-check the VGs.
VDO pool LVs are represented by a new dbus interface VgVdo. Currently
the interface only has additional VDO properties, but when the
ability to support additional LV creation is added we can add a method
to the interface.
The return value from bcache_invalidate_fd() was not being checked.
So I've introduced a little function, _invalidate_fd() that always
calls bcache_abort_fd() if the write fails.
The resume of 'released' 'COW' should preceed the resume of origin.
The fact we need to do the sequence differently for merge was
cause by bugs fixed in 2 previous commits - so we no longer need
to recognize 'merging' and we should always go with single
sequence.
The importance of this order is - to properly remove '-real' device
from origin LV. When COW is activated as 2nd. '-real' device is
kept in table as it cannot be removed during 1st. resume of origin,
and later activation of COW LV no longer builds tree associated
with origin LV.
When checking device id of a thin device that is just being
merged - the snapshot actually could have been already finished
which means '-real' suffix for the LV is already gone and just LV
is there - so check explicitely for this condition and use
correct UUID for this case.
When a cachevol LV is attached, have the LV keep it's lock
allocated. The lock on the cachevol won't be used while
it's attached. When the cachevol is split a new lock does
not need to be allocated. (Applies to cachevol usage by
both dm-cache and dm-writecache.)
When a user includes "--type foo" in a command, only
look at command definitions with matching type, as
opposed to using matching/mismatching --type as a
vote for/against a given command def. This means a
command with --type foo will prioritize a command def
with --type foo over other command defs that have
more matching options but an unmatching type. This
makes it more likely that a closely matching command
def will be recommended.
When LV gets cached and uses cache-pool - such cache-pool
will now get _cpool suffix automatically.
Thus 'Pool' column for cached LV will now show either _cvol
or _cpool LV.
Improve the implementation of extracting all text metadata
copies from the metadata area. Use this for the existing
metadata_all dump option.
Add a new metadata_search dump option which does not use
lvm headers to find metadata, but looks in standard
locations. This is useful if headers are damaged and
can't be used to locate metadata.
Adding '-v' to metadata_all or metadata_search will add
the description and creation_time to the printed list of
metadata instances that are found.
Before 'archive()' is called, lvm2 must not touch/modify metadata.
So move setting CACHE_VOL related flags past this point.
Also make sure reading of cache segtype always restores this
flag properly (even if compatible flag would be lost).
Since code is using -cdata and -cmeta UUID suffixes, it does not need
any new 'extra' ID to be generated and stored in metadata.
Since introduce of new 'segtype' cache+CACHE_USES_CACHEVOL we can
safely assume 'new' cache with cachevol will now be created
without extra metadata_id and data_id in metadata.
For backward compatibility, code still reads them in case older
version of metadata have them - so it still should be able
to activate such volumes.
Bonus is lowered size of lv structure used to store info about LV
(noticable with big volume groups).
In the hex dump output, grep for the vgname
followed by one space. This allows for test pids
with up to seven digits, which are used to contruct
the variable vgname used by the test. Otherwise
the long vgname wraps to the next line and fails to
match in grep.
When an LV is used as a writecache cachevol, give
it the LV name a _cvol suffix. Remove the suffix
when the cachevol is detached, restoring the
original LV name.
The first part of a cachevol LV is used for metadata,
and the rest of the space is used for data. The
division of space between metadata and data depends
on the total size of the cachevol.
The previous division gave more space than needed to
metadata, it was:
cachevol size 8M to 128M -> metadata size 16M *
cachevol size 128M to 1G -> metadata size 32M
cachevol size 1G and up -> metadata size 64M
(* if this resulted in over half the LV used as
metadata, then half the cachevol would be used
for metadata, and the other half for data.)
The division of space now gives less space to
metadata, it is:
cachevol size 8M to 16M -> metadata size 4M
cachevol size 16M to 4G -> metadata size 8M
cachevol size 4G to 16G -> metadata size 16M
cachevol size 16G to 32G -> metadata size 32M
cachevol size 32G and up -> metadata size 64M
When a VG contains some LVs with unknown segtypes, the user
should still be allowed to activate other LVs in the VG that
are understood.
$ lvs foo
WARNING: Unrecognised flag CACHE_USES_CACHEVOL in segment type cache+CACHE_USES_CACHEVOL.
WARNING: Unrecognised segment type cache+CACHE_USES_CACHEVOL
LV VG Attr LSize
lvol0 foo -wi------- 4.00m
other foo vwi---u--- 48.00m
$ lvcreate -l1 foo
WARNING: Unrecognised flag CACHE_USES_CACHEVOL in segment type cache+CACHE_USES_CACHEVOL.
WARNING: Unrecognised segment type cache+CACHE_USES_CACHEVOL
Cannot change VG foo with unknown segments in it!
Cannot process volume group foo
$ lvchange -ay foo/lvol0
WARNING: Unrecognised flag CACHE_USES_CACHEVOL in segment type cache+CACHE_USES_CACHEVOL.
WARNING: Unrecognised segment type cache+CACHE_USES_CACHEVOL
$ lvchange -ay foo/other
WARNING: Unrecognised flag CACHE_USES_CACHEVOL in segment type cache+CACHE_USES_CACHEVOL.
WARNING: Unrecognised segment type cache+CACHE_USES_CACHEVOL
Refusing activation of LV foo/other containing an unrecognised segment.
$ lvs foo
WARNING: Unrecognised flag CACHE_USES_CACHEVOL in segment type cache+CACHE_USES_CACHEVOL.
WARNING: Unrecognised segment type cache+CACHE_USES_CACHEVOL
LV VG Attr LSize
lvol0 foo -wi-a----- 4.00m
other foo vwi---u--- 48.00m
A cachevol LV had the CACHE_VOL status flag in metadata,
and the cache LV using it had no new flag. This caused
problems if the new metadata was used by an old version
of lvm. An old version of lvm would have two problems
processing the new metadata:
. The old lvm would return an error when reading the VG
metadata when it saw the unknown CACHE_VOL status flag.
. The old lvm would return an error when reading the VG
metadata because it would not find an expected cache pool
attached to the cache LV (since the cache LV had a
cachevol attached instead.)
Change the use of flags:
. Change the CACHE_VOL flag to be a COMPATIBLE flag (instead
of a STATUS flag) so that old versions will not fail when
they see it.
. When a cache LV is using a cachevol, the cache LV gets
a new SEGTYPE flag CACHE_USES_CACHEVOL. This flag is
appended to the segtype name, so that old lvm versions
will fail to use the LV because of an unknown segtype,
as opposed to failing to read the VG.
Enhance activation of cached devices using cachevol.
Correctly instatiace cachevol -cdata & -cmeta devices with
'-' in name (as they are only layered devices).
Code is also a bit more compacted (although still not ideal,
as the usage of extra UUIDs stored in metadata is troublesome
and will be repaired later).
NOTE: this patch my brink potentially minor incompatiblity for 'runtime' upgrade
Instead of using 'noflush' option, switch cache_mode into WRITETHROUGH
which does not require flushing, when user confirmed he does not
want flushing for WRITEBACK (because of (partially) missing caching PV)
For wiping we activate and clear 'regular' devices,
since in case of whole process interuption (i.e. kill -9)
we leave metadata & DM table and workable state all the time.
Let vgck --updatemetadata repair cases where different mdas
hold indepedently valid but unmatching copies of the metadata,
i.e. different text metadata checksums or text metadata sizes.
vgck --updatemetadata would write the same correct
metadata to good mdas, and then to bad mdas, but the
sequence of vg_write/vg_commit calls betwen good and
bad mdas could cause a different description field to
be generated for good/bad mdas. (The description field
describing the command was recently included in the
ondisk copy of the metadata text.)
If a VG is forcibly changed from lock_type sanlock to
lock_type none, the internal lvmlock LV is left behind.
If that LV is not removed before vgremove is run on the
VG, then an internal check will be triggered by the
hidden lvmlock LV. So, check for and remove a left over
lvmlock LV during vgremove.
Add lots of vdo fields:
vdo_operating_mode - For vdo pools, its current operating mode.
vdo_compression_state - For vdo pools, whether compression is running.
vdo_index_state - For vdo pools, state of index for deduplication.
vdo_used_size - For vdo pools, currently used space.
vdo_saving_percent - For vdo pools, percentage of saved space.
vdo_compression - Set for compressed LV (vdopool).
vdo_deduplication - Set for deduplicated LV (vdopool).
vdo_use_metadata_hints - Use REQ_SYNC for writes (vdopool).
vdo_minimum_io_size - Minimum acceptable IO size (vdopool).
vdo_block_map_cache_size - Allocated caching size (vdopool).
vdo_block_map_era_length - Speed of cache writes (vdopool).
vdo_use_sparse_index - Sparse indexing (vdopool).
vdo_index_memory_size - Allocated indexing memory (vdopool).
vdo_slab_size - Increment size for growing (vdopool).
vdo_ack_threads - Acknowledging threads (vdopool).
vdo_bio_threads - IO submitting threads (vdopool).
vdo_bio_rotation - IO enqueue (vdopool).
vdo_cpu_threads - CPU threads for compression and hashing (vdopool).
vdo_hash_zone_threads - Threads for subdivide parts (vdopool).
vdo_logical_threads - Logical threads for subdivide parts (vdopool).
vdo_physical_threads - Physical threads for subdivide parts (vdopool).
vdo_max_discard - Maximum discard size volume can recieve (vdopool).
vdo_write_policy - Specified write policy (vdopool).
vdo_header_size - Header size at front of vdopool.
Previously only 'lvdisplay -m' was exposing them.
Since we now support activation of 'vdo' volume
without explicit activation of 'vdopool' it's now possible
to have active layer vdopool (-vpool) volume and
having vdopool itself inactive - yet still in this
case we can show available stats for this volume.
But we need to show correct activation status and other
standard info.
Adds support for the DM_GET_TARGET_VERSION to dmsetup.
It introduces a new comman "target-version" that will accept list
of targets and print their version.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Use /dev/md33 instead of /dev/md0 to reduce chances of
conflicting with an existing name.
Only call 'mdadm --stop /dev/md33' for cleanup and don't
use 'mdadm --stop --scan' to avoid stopping other md devs.
Due to a dm-raid target flaw fixed in target version 1.15.0,
extents of raid sets don't get resynchronized when new MD bitmp
pages have to be allocated due to the extension.
Introduce lvextend-raid.sh to test this flaw.
Related: rhbz1671964
When the PV device names in the VG metadata do not match the
current PV device names seen on the system, do not use the
optimized activation function (that avoids extra device scanning.)
When the device names do not match, it's a clue that there could
be duplicate PVs, in which case we want to scan all devicess to
find any duplicates and stop the activation if found.
This does not prevent autoactivating a VG from the incorrect
duplicate PV, because the incorrect duplicate may appear by itself
first. At that point its duplicate PV does not exist to be seen.
(A future enhancement could use the WWID to strengthen this
detection.)
Analogous to the case of a device with no regions, it is not an
error to attempt to list the stats groups on a device that has no
configured groups: just return success and continue.
Avoid checking 'lv_is_active()' since special LV types does this
validation anyway what calling _percent() function and call it
ONLY when none of special types is queried.
This restores support for VDO resize (as with support for
separate VDO pool activation, plain query for lv_is_active()
is not working in this case).
If the linear mapping is lost (for whatever reason, i.e.
test suite forcible 'dmsetup remove' linear LV,
lvm2 had hard times figuring out how to deactivate such DM table.
So add function which is in case inactive VDO pool LV checks if
the pool is actually still active (-vpool device present) and
it has open count == 0. In this case deactivation is allowed
to continue and cleanup DM table.
- use internal CACHE_VOL flag on cachevol LV
- add suffixes to dm uuids for internal LVs
- display appropriate letters in the LV attr field
- display writecache's cachevol in lvs output
This reverts commit ad560a286a.
The reverted patch also removed the warning which we realized we need
to keep as valuable process information (see related bugzilla below).
In a followup patch, we'll keep the message and avoid bailing out thus
always allowing lvconvert to try repairing if 'allocate' fault policy set.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1751887
. For dm-cache in writethrough, always allow splitcache,
whether the cache is missing PVs or not.
. For dm-cache in writeback, if the cache is missing PVs,
allow splitcache with force and yes.
. For dm-writecache, if the cache is missing PVs,
allow splitcache with force and yes.
Enhance 'activation' experience for VDO pool to more closely match
what happens for thin-pools where we do use a 'fake' LV to keep pool
running even when no thinLVs are active. This gives user a choice
whether he want to keep thin-pool running (wihout possibly lenghty
activation/deactivation process)
As we do plan to support multple VDO LVs to be mapped into a single VDO,
we want to give user same experience and 'use-patter' as with thin-pools.
This patch gives option to activate VDO pool only without activating
VDO LV.
Also due to 'fake' layering LV we can protect usage of VDO pool from
command like 'mkfs' which do require exlusive access to the volume,
which is no longer possible.
Note: VDO pool contains 1024 initial sectors as 'empty' header - such
header is also exposed in layered LV (as read-only LV).
For blkid we are indentified as LV with UUID suffix - thus private DM
device of lvm2 - so we do not need to store any extra info in this
header space (aka zero is good enough).
When lvm2 is activating layered pool LV (to basically keep pool opened,
the other function used to be 'locking' be in sync with DM table)
use this LV in read-only mode - this prevents 'write' access into
data volume content of thin-pool.
Note: since EMPTY/unused thin-pool is created as 'public LV' for generic
use by any user who i.e. wish to maintain thin-pool and thins himself.
At this moment, thin-pool appears as writable LV. As soon as the 1st.
thinLV is created, layer volume will appear is 'read-only' LV from this moment.
When pvscan is used to activate a VG via an
asynchronous service (i.e. lvm2-pvscan), there
is no requirement that the command wait for
udev to create device nodes before returning.
It's possible that waiting for udev is slow
enough to cause the service running the command
to time out. So, allow the --noudevsync option
to be given to pvscan to skip waiting for udev.
(This commit is not changing the lvm2-pvscan
service itself to use --noudevsync.)
Still unknown is whether there are any complex
LV activation cases in which lvm itself requires
access to a device node, in which case the udev
wait could be needed by lvm itself.
(When running an activation command directly
from the command line, it's generally expected
that the activated LVs are ready to use when
the command is finished, so lvm waits for
udev to finish creating the dev nodes.)
When an online PV completed a VG, the standard
activation functions were used to activate the VG.
These functions use a full scan of all devs.
When many pvscans are run during startup and need
to activate many VGs, scanning all devs from all
the pvscans can take a long time.
Optimize VG activation in pvscan to scan only the
devs in the VG being activated. This makes use of
the online file info that was used to determine
the VG was complete.
The downside of this approach is that pvscan activation
will not detect duplicate PVs and block activation,
where a normal activation command (which scans all
devices) would.
Fixes a regression from commit ba7ff96faf
"improve reading and repairing vg metadata"
where the error path for a vg name with invalid
charaters was missing an error flag, which led
to the caller not recognizing an error occured.
Previously, an error flag was hidden in the old
_vg_make_handle function.
Only the first entry of the filter array was being
included in the copy of the filter, rather than the
entire thing. The result is that hints would not be
refreshed if the filter was changed but the first
entry was unchanged.
Fixes a segfault in the recent commit e01fddc57:
"improve duplicate pv handling for md components"
While choosing between duplicates, the info struct is
not always valid; it may have been dropped already.
Remove the code that was still using the info struct for
size comparisons. The size comparisons were a bogus check
anyway because it was just preferring the dev that had
already been chosen, it wasn't actually comparing the
dev size to the PV size. It would be good to use a
dev/PV size comparison in the duplicate handling code, but
the PV size is not available until after vg_read, not
from the scan.
With Python 3.8 converting these directly to string using str()
no longer works, we need to convert these to integer first.
On Python 3.8:
>>> str(dbus.Int64(1))
'dbus.Int64(1)'
On Python 3.7 (and older):
>>> str(dbus.UInt64(1))
'1'
This is probably related to removing __str__ function from method
from int (dbus.UInt is subclass of int) which happened in 3.8, see
https://docs.python.org/3.8/whatsnew/3.8.html
Signed-off-by: Vojtech Trefny <vtrefny@redhat.com>
Since we need to preserve allocated strings across 2 separate
activation calls of '_tree_action()' we need to use other mem
pool them dm->mem - but since cmd->mem is released between
individual lvm2 locking calls, we rather introduce a new separate
mem pool just for pending deletes with easy to see life-span.
(not using 'libmem' as it would basicaly keep allocations over
the whole lifetime of clvmd)
This patch is fixing previous commmit where the memory was
improperly used after pool release.
Update configure and make code compilable if prlimit() is not present.
Since the code is suspicious do not cope yet with it's replacement
with set/getrlimit().
New udev in rawhide seems to be 'dropping' udev rule operations for devices
that are no longer existing - while this is 'probably' a bug - it's
revealing moments in lvm2 that likely should not run in a single
transaction and we should wait for a cookie before submitting more work.
TODO: it seem more 'error' paths should always include synchronization
before starting deactivating 'just activated' devices.
We should probably figure out some 'automatic' solution for this instead
of placing sync_local_dev_name() all over the place...
Support internal removal of 'cache origin' volume - which we
do not normally expose to a user - however internal processing
loops may hit this condition (depending on order of list LVs).
So when this operation is internally requested - we automatically
try to remove it's 'holding' LV (cache LV) - which will also
remove the origin.
Drop the 'cluster-only' optimization so we do resume ALL device
before we try to wait on cookie before 'removal' operation.
It's more correct order of operation - alhtough possibly slightly
less efficient - but until we have correct list of operations
'in-progress' we can't do anything better.
With previous patch 30a98e4d67 we
started to put devices one pending_delete list instead
of directly scheduling their removal.
However we have operations like 'snapshot merge' where we are
resuming device tree in 2 subsequent activation calls - so
1st such call will still have suspened devices and no chance
to push 'remove' ioctl.
Since we curently cannot easily solve this by doing just single
activation call (which would be preferred solution) - we introduce
a preservation of pending_delete via command structure and
then restore it on next activation call.
This way we keep to remove devices later - although it might be
not the best moment - this may need futher tunning.
Also we don't keep the list of operation in 1 trasaction
(unless we do verify udev symlinks) - this could probably
also make it more correct in terms of which 'remove' can
be combined we already running 'resume'.
Udev debugging is a bit tricky, so to more easily pair cookie ID,
which is the lowest 16 bit - print cookie as hexa number.
This simplify pairing of processed cookies while the 'higher bit flags'
are changed for the same cookie.
Resuming of 'error' table entry followed with it's dirrect removal
is now troublesame with latest udev as it may skip processing of
udev rules for already 'dropped' device nodes.
As we cannot 'synchronize' with udev while we know we have devices
in suspended state - rework 'cleanup' so it collects nodes
for removal into pending_delete list and process the list with
synchronization once we are without any suspended nodes.
Between 'resume' and 'remove' we need to wait for udev to synchronize,
otherwise udev may 'skip' resume event processing if the udev node
is already gone.
When pvmove is finished, we do a tricky operation since we try to
resume multiple different device that were all joined into 1 big tree.
Currently we use the infromation from existing live DM table,
where we can get list of all holders of pvmove device.
We look for these nodes (by uuid) in new metadata, and we do now a full
regular device add into dm tree structure. All devices should be
already PRELOAD with correct table before entering suspend state,
however for correctly working readahead we need to put correct info
also into RESUME tree. Since table are preloaded, the same table
is skip and resume, but correct read ahead is now set.
Eliminate md components at the start so they don't
interfere with actual duplicates, and don't need
to be removed later. This also allows for choosing
no copy of a PVID if they all happen to be md
components.
Usually md components are eliminated in label scan and/or
duplicate resolution, but they could sometimes get into
the vg_read stage, where set_pv_devices compares the
device to the PV.
If set_pv_devices runs an md component check and finds
one, vg_read should eliminate the components.
In set_pv_devices, run an md component check always
if the PV is smaller than the device (this is not
very common.) If the PV is larger than the device,
(more common), do the component check when the config
setting is "auto" (the default).
The OPTIONS+="event_timeout" is Unsupported since systemd/udev version 216,
that is ~5 years ago.
Since systemd/udev version 243, there's a new message printed if unsupported
OPTIONS value is used:
Invalid value for OPTIONS key, ignoring: 'event_timeout=180'
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1740666
Some older BB with older cryptsetup tool do not 'retry' on remove
and when remove is issued right after 'fsck' - it might be
rejected with:
Device @PREFIX@-tcrypt2 is busy.
Try to use udevadm settle.
Since we use 'set -euE -o pipefail' for shell execution,
any failure of any command in the 'piped' shell can result
in failure of whole executed chain - resulting in typically
unsually test skip, that was left unnoticed.
Since checked command have usually short output, the simplest
fix seems to be to let grep parse whole output instead
of quiting after first match.
Kernels <2.6.27 don't have /sys/dev dir - add code for looking
out device name via longre seach in /sys/block
This makes commands like 'dmsetup dep -o blkdevname' working.
Fix versioning for updated symbols dm_stats_create_region
and dm_stats_create_region.
Only the latest symbol should have global entry.
Since I'm not sure what is currenlty the best option for
old symbols - we added support for easy commenting of them
(so we do not lose information when the symbol appeared
for the first time.)
Note: some old already deleted symbols should have been
restored as comments.
When there are more devices than the current soft
open file limit (default 1024), raise the soft limit
to the hard/max limit (default 4096).
Do this prior to scanning in case enough of the
devices are PVs that need to be kept open.
Avoid having PVs with different logical block sizes in the same VG.
This prevents LVs from having mixed block sizes, which can produce
file system errors.
The new config setting devices/allow_mixed_block_sizes (default 0)
can be changed to 1 to return to the unrestricted mode.
Do this at two levels, although one would be enough to
fix the problem seen recently:
- Ignore any reported sector size other than 512 of 4096.
If either sector size (physical or logical) is reported
as 512, then use 512. If neither are reported as 512,
and one or the other is reported as 4096, then use 4096.
If neither is reported as either 512 or 4096, then use 512.
- When rounding up a limited write in bcache to be a multiple
of the sector size, check that the resulting write size is
not larger than the bcache block itself. (This shouldn't
happen if the sector size is 512 or 4096.)
Previously, consecutive copies of metadata would have garbage
data in the space between them. After metadata wrapping,
the garbage would be portions of old metadata. This made
analysis of the metadata area more difficult.
This would happen because the start of new copy of metadata
is advanced from the end of the last copy to start at the
next 512 byte boundary.
Zero the space between consecutive copies of metadata by
extending each metadata write to end at the next 512 byte
boundary. The size of the metadata itself is not extended,
only the write. The buffer being written contains the
metadata text followed by the necessary number of zeros.
An active md device with an end superblock causes lvm to
enable full md component detection. This was being done
within the filter loop instead of before, so the full
filtering of some devs could be missed.
Also incorporate the recently added config setting that
controls the md component detection.
Fix commit 7836e7aa1c
"pvscan: ignore device with incorrect size"
which caused pvscan to not consider a PV online (for purposes
of event based activation) if the PV and device sizes differed.
This helped to avoid mistaking MD components for PVs, and is
replaced by triggering an md component check when PV and device
sizes differ (which happens in set_pv_device).
This check was mistakenly removed when shifting code in commit
"separate code for setting devices from metadata parsing".
Put it back with some new conditions.
This allows the creation of a striped mirror leg(s) during upconvert
by adding lvconvert command line options --stripes/--stripesize
for 'mirror' to tools/command-lines.in.
In case multiple mirror legs are being added, all will have the
same requested striped layout.
Resolves: rhbz1720705
We've been assigning this in 69-dm-lvm-metad.rules:
ENV{ID_MODEL}="LVM PV $env{ID_FS_UUID_ENC} on /dev/$name"
This was for the description to appear for each systemd device
unit representing this device, for example:
$systemctl -a | grep "LVM PV"
dev-block-252:2.device loaded active plugged LVM PV JhxC7B-YTgk-3jIU-5GVo-c4gV-W8t3-UUz06p on /dev/vda2 2
dev-disk-by\x2did-lvm\x2dpv\x2duuid\x2dJhxC7B\x2dYTgk\x2d3jIU\x2d5GVo\x2dc4gV\x2dW8t3\x2dUUz06p.device loaded active plugged LVM PV JhxC7B-YTgk-3jIU-5GVo-c4gV-W8t3-UUz06p on /dev/vda2 2
...
However, there could be an actual ID_MODEL that people are interested in
more than the fact that this is an LVM PV and so we shouldn't overwrite
the value.
Also, we already have a symlink /dev/disk/by-id/lvm-pv-uuid-<PV_UUID>
created which is then reflected as device unit (all device's symlinks
have systemd device unit representation) so we can still reach this
information in systemd unit listings even without setting the ID_MODEL.
Reported here: https://github.com/lvmteam/lvm2/issues/21
The cache repair utility does not yet work with a cachevol
(where metadata and data exist on the same LV.) So, warn
and prompt if writeback is specified with a cachevol.
The exported VG checking/enforcement was scattered and
inconsistent. This centralizes it and makes it consistent,
following the existing approach for foreign and shared
VGs/PVs, which are very similar to exported VGs/PVs.
The access policy that now applies to foreign/shared/exported
VGs/PVs, is that if a foreign/shared/exported VG/PV is named
on the command line (i.e. explicitly requested by the user),
and the command is not permitted to operate on it because it
is foreign/shared/exported, then an access error is reported
and the command exits with an error. But, if the command is
processing all VGs/PVs, and happens to come across a
foreign/shared/exported VG/PV (that is not explicitly named on
the command line), then the command silently skips it and does
not produce an error.
A command using tags or --select handles inaccessible VGs/PVs
the same way as a command processing all VGs/PVs, and will
not report/return errors if these inaccessible VGs/PVs exist.
The new policy fixes the exit codes on a somewhat random set of
commands that previously exited with an error if they were
looking at all VGs/PVs and an exported VG existed on the system.
There should be no change to which commands are allowed/disallowed
on exported VGs/PVs.
Certain LV commands (lvs/lvdisplay/lvscan) would previously not
display LVs from an exported VG (for unknown reasons). This has
not changed. The lvm fullreport command would previously report
info about an exported VG but not about the LVs in it. This
has changed to include all info from the exported VG.
When vg_read rescans devices with the intention of
writing the VG, the label rescan can open the devs
RW so they do not need to be closed and reopened
RW in dev_write_bytes.
Previously the VG metadata description field (which contains
the command line) was only included in backup/archive copies
of the metadata. Now also include it in the metadata written
to the metadata areas.
When monitoring, skip exported VGs without causing a command
failure.
The lvm2-monitor service runs 'vgchange --monitor y', so
any exported VG on the system would cause the service to
fail.
The man page generation for pvchange/lvchange/vgchange was
incorrect (leaving out some option listings) as a result of
commit e225bf5 "fix command definition for pvchange -a"
So when the target name happened to be a suffix of another one,
the grep was filtering incorrect line
(i.e. dm-cache && dm-writecache) - so do a line head matching.
The -a was being included in the set of "one or more"
options instead of an actual required option. Even
though the cmd def was not implementing the restrictions
correctly, the command internally was.
Adjust the cmd def code which did not support a command
with some real required options and a set of "one or more"
options.
The way that this command now uses the global lock
followed by a label scan, it can simply check if the
new VG name exists, and if not lock it and create it.
These two flags may be not reset at the end of
the command when the unlock is implicit, which
is a problem if the cmd struct is reused.
Clear the flags in the general fin_locking.
* origin/master: (22 commits)
tests: add metadata-bad-mdaheader.sh
tests: add metadata-bad-text.sh
tests: add outdated-pv.sh
tests: add metadata-old.sh
tests: add missing-pv missing-pv-unused
metadata.c: removed unused code
improve reading and repairing vg metadata
add a warning message when updating old metadata
vgcfgbackup add error messages
vgck --updatemetadata is a new command
move pv header repairs to vg_write
process_each_pv handle outdated pvs
move wipe_outdated_pvs to vg_write
create separate lvmcache update functions for read and write
fix vg_commit return value
change args for text label read function
add mda arg to add_mda
keep track of which mdas have old metadata in lvmcache
ability to keep track of outdated pvs in lvmcache
ability to keep track of bad mdas in lvmcache
...
The fact that vg repair is implemented as a part of vg read
has led to a messy and complicated implementation of vg_read,
and limited and uncontrolled repair capability. This splits
read and repair apart.
Summary
-------
- take all kinds of various repairs out of vg_read
- vg_read no longer writes anything
- vg_read now simply reads and returns vg metadata
- vg_read ignores bad or old copies of metadata
- vg_read proceeds with a single good copy of metadata
- improve error checks and handling when reading
- keep track of bad (corrupt) copies of metadata in lvmcache
- keep track of old (seqno) copies of metadata in lvmcache
- keep track of outdated PVs in lvmcache
- vg_write will do basic repairs
- new command vgck --updatemetdata will do all repairs
Details
-------
- In scan, do not delete dev from lvmcache if reading/processing fails;
the dev is still present, and removing it makes it look like the dev
is not there. Records are now kept about the problems with each PV
so they be fixed/repaired in the appropriate places.
- In scan, record a bad mda on failure, and delete the mda from
mda in use list so it will not be used by vg_read or vg_write,
only by repair.
- In scan, succeed if any good mda on a device is found, instead of
failing if any is bad. The bad/old copies of metadata should not
interfere with normal usage while good copies can be used.
- In scan, add a record of old mdas in lvmcache for later, do not repair
them while reading, and do not let them prevent us from finding and
using a good copy of metadata from elsewhere. One result is that
"inconsistent metadata" is no longer a read error, but instead a
record in lvmcache that can be addressed separate from the read.
- Treat a dev with no good mdas like a dev with no mdas, which is an
existing case we already handle.
- Don't use a fake vg "handle" for returning an error from vg_read,
or the vg_read_error function for getting that error number;
just return null if the vg cannot be read or used, and an error_flags
arg with flags set for the specific kind of error (which can be used
later for determining the kind of repair.)
- Saving an original copy of the vg metadata, for purposes of reverting
a write, is now done explicitly in vg_read instead of being hidden in
the vg_make_handle function.
- When a vg is not accessible due to "access restrictions" but is
otherwise fine, return the vg through the new error_vg arg so that
process_each_pv can skip the PVs in the VG while processing.
(This is a temporary accomodation for the way process_each_pv
tracks which devs have been looked at, and can be dropped later
when process_each_pv implementation dev tracking is changed.)
- vg_read does not try to fix or recover a vg, but now just reads the
metadata, checks access restrictions and returns it.
(Checking access restrictions might be better done outside of vg_read,
but this is a later improvement.)
- _vg_read now simply makes one attempt to read metadata from
each mda, and uses the most recent copy to return to the caller
in the form of a 'vg' struct.
(bad mdas were excluded during the scan and are not retried)
(old mdas were not excluded during scan and are retried here)
- vg_read uses _vg_read to get the latest copy of metadata from mdas,
and then makes various checks against it to produce warnings,
and to check if VG access is allowed (access restrictions include:
writable, foreign, shared, clustered, missing pvs).
- Things that were previously silently/automatically written by vg_read
that are now done by vg_write, based on the records made in lvmcache
during the scan and read:
. clearing the missing flag
. updating old copies of metadata
. clearing outdated pvs
. updating pv header flags
- Bad/corrupt metadata are now repaired; they were not before.
Test changes
------------
- A read command no longer writes the VG to repair it, so add a write
command to do a repair.
(inconsistent-metadata, unlost-pv)
- When a missing PV is removed from a VG, and then the device is
enabled again, vgck --updatemetadata is needed to clear the
outdated PV before it can be used again, where it wasn't before.
(lvconvert-repair-policy, lvconvert-repair-raid, lvconvert-repair,
mirror-vgreduce-removemissing, pv-ext-flags, unlost-pv)
Reading bad/old metadata
------------------------
- "bad metadata": the mda_header or metadata text has invalid fields
or can't be parsed by lvm. This is a form of corruption that would
not be caused by known failure scenarios. A checksum error is
typically included among the errors reported.
- "old metadata": a valid copy of the metadata that has a smaller seqno
than other copies of the metadata. This can happen if the device
failed, or io failed, or lvm failed while commiting new metadata
to all the metadata areas. Old metadata on a PV that has been
removed from the VG is the "outdated" case below.
When a VG has some PVs with bad/old metadata, lvm can simply ignore
the bad/old copies, and use a good copy. This is why there are
multiple copies of the metadata -- so it's available even when some
of the copies cannot be used. The bad/old copies do not have to be
repaired before the VG can be used (the repair can happen later.)
A PV with no good copies of the metadata simply falls back to being
treated like a PV with no mdas; a common and harmless configuration.
When bad/old metadata exists, lvm warns the user about it, and
suggests repairing it using a new metadata repair command.
Bad metadata in particular is something that users will want to
investigate and repair themselves, since it should not happen and
may indicate some other problem that needs to be fixed.
PVs with bad/old metadata are not the same as missing devices.
Missing devices will block various kinds of VG modification or
activation, but bad/old metadata will not.
Previously, lvm would attempt to repair bad/old metadata whenever
it was read. This was unnecessary since lvm does not require every
copy of the metadata to be used. It would also hide potential
problems that should be investigated by the user. It was also
dangerous in cases where the VG was on shared storage. The user
is now allowed to investigate potential problems and decide how
and when to repair them.
Repairing bad/old metadata
--------------------------
When label scan sees bad metadata in an mda, that mda is removed
from the lvmcache info->mdas list. This means that vg_read will
skip it, and not attempt to read/process it again. If it was
the only in-use mda on a PV, that PV is treated like a PV with
no mdas. It also means that vg_write will also skip the bad mda,
and not attempt to write new metadata to it. The only way to
repair bad metadata is with the metadata repair command.
When label scan sees old metadata in an mda, that mda is kept
in the lvmcache info->mdas list. This means that vg_read will
read/process it again, and likely see the same mismatch with
the other copies of the metadata. Like the label_scan, the
vg_read will simply ignore the old copy of the metadata and
use the latest copy. If the command is modifying the vg
(e.g. lvcreate), then vg_write, which writes new metadata to
every mda on info->mdas, will write the new metadata to the
mda that had the old version. If successful, this will resolve
the old metadata problem (without needing to run a metadata
repair command.)
Outdated PVs
------------
An outdated PV is a PV that has an old copy of VG metadata
that shows it is a member of the VG, but the latest copy of
the VG metadata does not include this PV. This happens if
the PV is disconnected, vgreduce --removemissing is run to
remove the PV from the VG, then the PV is reconnected.
In this case, the outdated PV needs have its outdated metadata
removed and the PV used flag needs to be cleared. This repair
will be done by the subsequent repair command. It is also done
if vgremove is run on the VG.
MISSING PVs
-----------
When a device is missing, most commands will refuse to modify
the VG. This is the simple case. More complicated is when
a command is allowed to modify the VG while it is missing a
device.
When a VG is written while a device is missing for one of it's PVs,
the VG metadata is written to disk with the MISSING flag on the PV
with the missing device. When the VG is next used, it is treated
as if the PV with the MISSING flag still has a missing device, even
if that device has reappeared.
If all LVs that were using a PV with the MISSING flag are removed
or repaired so that the MISSING PV is no longer used, then the
next time the VG metadata is written, the MISSING flag will be
dropped.
Alternative methods of clearing the MISSING flag are:
vgreduce --removemissing will remove PVs with missing devices,
or PVs with the MISSING flag where the device has reappeared.
vgextend --restoremissing will clear the MISSING flag on PVs
where the device has reappeared, allowing the VG to be used
normally. This must be done with caution since the reappeared
device may have old data that is inconsistent with data on other PVs.
Bad mda repair
--------------
The new command:
vgck --updatemetadata VG
first uses vg_write to repair old metadata, and other basic
issues mentioned above (old metadata, outdated PVs, pv_header
flags, MISSING_PV flags). It will also go further and repair
bad metadata:
. text metadata that has a bad checksum
. text metadata that is not parsable
. corrupt mda_header checksum and version fields
(To keep a clean diff, #if 0 is added around functions that
are replaced by new code. These commented functions are
removed by the following commit.)
uses vg_write to correct more common or less severe issues,
and also adds the ability to repair some metadata corruption
that couldn't be handled previously.
and implement it based on a device, not based
on a pv struct (which is not available when the
device is not a part of the vg.)
currently only the vgremove command wipes outdated
pvs until more advanced recovery is added in a
subsequent commit
The vg read and vg write cases need to update lvmcache
differently, so create separate functions for them.
The read case now handles checking for outdated mdas
and moves them aside into a new list to be repaired in
a subsequent commit.
The existing comment was desribing the correct behavior,
but the code didn't match. The commit is successful if
one mda was committed. Making it depend on the result of
the internal lvmcache update was wrong.
Have the caller pass the label_sector to the read
function so the read function can set the sector
field in the label struct, instead of having the
read function return a pointer to the label for
the caller to set the sector field.
Also have the read function return a flag indicating
to the caller that the scanned device was identified
as a duplicate pv.
Outdated PVs hold metadata for VG from which they
have been removed. Add the ability to keep track
of these in lvmcache.
This will be used for more advanced repair in a
subsequent commit.
mda's that cannot be processed by lvm because of
some corruption can be kept on a separate list.
These will be used for more advanced repair in a
subsequent commit.
When reading metadata headers and text, use a new set
of flags to identify specific errors that are seen.
These will be used for more advanced repair in a
subsequent commit.
If udev info is missing for a device, (which would indicate
if it's an MD component), then do an end-of-device read to
check if a PV is an MD component. (This is skipped when
using hints since we already know devs in hints are good.)
A new config setting md_component_checks can be used to
disable the additional end-of-device MD checks, or to
always enable end-of-device MD checks.
When both hints and udev info are disabled/unavailable,
the end of PVs will now be scanned by default. If md
devices with end-of-device superblocks are not being
used, the extra I/O overhead can be avoided by setting
md_component_checks="start".
Save the previous duplicate PVs in a global list instead
of a list on the cmd struct. dmeventd reuses the cmd struct
for multiple commands, and the list entries between commands
were being freed (apparently), causing a segfault in dmeventd
when it tried to use items in cmd->unused_duplicate_devs
that had been saved there by the previous command.
Use the recently added dump routines to produce the
old/traditional pvck output, and remove the code that
had been used for that.
The validation/checking done by the new routines means
that new lines prefixed with CHECK are printed for
incorrect values.
Recent kernel version from kernel commit:
de7180ff908b2bc0342e832dbdaa9a5f1ecaa33a
started to report in cache status line new flag:
no_discard_passdown
Whenever lvm spots unknown status it reports:
Unknown feature in status:
So add reconginzing this feature flag and also report this with
'lvs -o+kernel_discards'
When no_discard_passdown is found in status 'nopassdown' gets reported
for this field (roughly matching what we report for thin-pools).
Add 'pvck --dump headers' to print all the
lvm ondisk structs. Also checks the values
and prints any problems.
The previous dump metadata is also converted to
use these same routines, which do not depend on lvm
fully scanning/reading/processing the headers and
metadata on disk. This makes it useful to get data in
cases where there is corruption that would otherwise
prevent the normal functions from working.
The test was failing consistently on some VMs (F25), and inconsistently
on Rawhide.
With increased latency these failures are no longer reproducible.
Reproducer:
make check_lvmpolld T=pvmove-resume-multiseg.sh
The new command 'pvck --dump metadata PV' will extract
the current version of VG metadata from a PV for testing
and debugging. --dump metadata_area extracts the entire
text metadata area.
teardown after the test was failing, probably because
of uncoordinated udev actions running on the test
system. Try to avoid this by doing some work before
teardown.
lvm2 till version 2.02.169 (commit 78d004efa8)
was printing invalid creation_time argument into metadata on 32bit arch.
However with commit ba9820b142 we started
to properly validate all input numbers and thus we refused to accept
invalid metadata with 'garbage' string - but this results in the
situation where metadata produced on older lvm2 on 32 bit architecture
will become unreadable after upgrade.
To fix this case - extend libdm parser in a way, that whenever we
find error integer value, we also check if the parsed value is not for
creation_time node and in this case we let the metadata pass through
with made-up date 2018-05-24 (release date of 2.02.169).
commit aa75b31db5
"pvscan: handle case of scanning PV without metadata last"
failed to recognize that an arg may be null in the case of
'pvscan --cache' (without -aay) which does not keep track
of complete VGs because it does not need to activate them.
The scanning rework missed removing this instance of label scan.
It's no longer needed because of the way that label scan is always
run once from the start of the command. This unnecessary scan
would be triggered by running 'pvs @tag'.
If an md component is not excluded by other means and
vg_read is used to read metadata from it, then this new
check compares the device size with the PV size, and runs
a full md check on the device if the sizes don't match.
and don't call it from inside pvcreate_each_device.
This avoids having to repeat it for users of
pvcreate_each_device (pvcreate/pvremove/vgcreate/vgextend.)
There have been two file locks used to protect lvm
"global state": "ORPHANS" and "GLOBAL".
Commands that used the ORPHAN flock in exclusive mode:
pvcreate, pvremove, vgcreate, vgextend, vgremove,
vgcfgrestore
Commands that used the ORPHAN flock in shared mode:
vgimportclone, pvs, pvscan, pvresize, pvmove,
pvdisplay, pvchange, fullreport
Commands that used the GLOBAL flock in exclusive mode:
pvchange, pvscan, vgimportclone, vgscan
Commands that used the GLOBAL flock in shared mode:
pvscan --cache, pvs
The ORPHAN lock covers the important cases of serializing
the use of orphan PVs. It also partially covers the
reporting of orphan PVs (although not correctly as
explained below.)
The GLOBAL lock doesn't seem to have a clear purpose
(it may have eroded over time.)
Neither lock correctly protects the VG namespace, or
orphan PV properties.
To simplify and correct these issues, the two separate
flocks are combined into the one GLOBAL flock, and this flock
is used from the locking sites that are in place for the
lvmlockd global lock.
The logic behind the lvmlockd (distributed) global lock is
that any command that changes "global state" needs to take
the global lock in ex mode. Global state in lvm is: the list
of VG names, the set of orphan PVs, and any properties of
orphan PVs. Reading this global state can use the global lock
in sh mode to ensure it doesn't change while being reported.
The locking of global state now looks like:
lockd_global()
previously named lockd_gl(), acquires the distributed
global lock through lvmlockd. This is unchanged.
It serializes distributed lvm commands that are changing
global state. This is a no-op when lvmlockd is not in use.
lockf_global()
acquires an flock on a local file. It serializes local lvm
commands that are changing global state.
lock_global()
first calls lockf_global() to acquire the local flock for
global state, and if this succeeds, it calls lockd_global()
to acquire the distributed lock for global state.
Replace instances of lockd_gl() with lock_global(), so that the
existing sites for lvmlockd global state locking are now also
used for local file locking of global state. Remove the previous
file locking calls lock_vol(GLOBAL) and lock_vol(ORPHAN).
The following commands which change global state are now
serialized with the exclusive global flock:
pvchange (of orphan), pvresize (of orphan), pvcreate, pvremove,
vgcreate, vgextend, vgremove, vgreduce, vgrename,
vgcfgrestore, vgimportclone, vgmerge, vgsplit
Commands that use a shared flock to read global state (and will
be serialized against the prior list) are those that use
process_each functions that are based on processing a list of
all VG names, or all PVs. The list of all VGs or all PVs is
global state and the shared lock prevents those lists from
changing while the command is processing them.
The ORPHAN lock previously attempted to produce an accurate
listing of orphan PVs, but it was only acquired at the end of
the command during the fake vg_read of the fake orphan vg.
This is not when orphan PVs were determined; they were
determined by elimination beforehand by processing all real
VGs, and subtracting the PVs in the real VGs from the list
of all PVs that had been identified during the initial scan.
This is fixed by holding the single global lock in shared mode
while processing all VGs to determine the list of orphan PVs.
wipe_lv knows it's going to write the device, so it
can open rw from the start. It was opening readonly,
and then dev_write needed to reopen it readwrite.
To avoid tiny race on checking arrival of signal and entering select
(that can latter remain stuck as signal was already delivered) switch
to use pselect().
If it would needed, we can eventually add extra code for older systems
without pselect(), but there are probably no such ancient systems in
use.
Handle the case where pvscan --cache -aay (with no dev args)
gets to the final PV, completing the VG, but that final PV does not
have VG metadata. In this case, we need to use VG metadata from a
previously scanned PV in the same VG, which we saved for this
possibility. Using this saved metadata, we can find which VG
this PVID belongs to, and then check if that VG is now complete,
and if so add the VG name to the list of complete VGs to be
autoactivated.
When hints are invalid and ignored, the list of hints
could be non-empty (from additions before an invalid
hint was found). This confused the calling code which
was checking for an empty list to see if hints were used.
Ensure the list is empty when hints are not used.
We already used Conflicts=shutdown target to stop LVM2 services on shutdown.
But we still missed the ordering - the shutdown.target should be reached
only after all the services are really stopped.
Reported here: https://github.com/lvmteam/lvm2/issues/17
If a device looks like a PV, but its size does not
match the PV size in the metadata, then skip it for
purposes of autoactivation. It's probably not wrong
device for the PV.
In the past, the first 'pvscan --cache -aay dev' command
to run on the system would initialize the pvs_online dir
by scanning all devs and creating online files for all pvs
it found, and then autoactivating the VG (if complete) for
the named dev. The idea was that the system may not have
been able to run pvscan commands for early devices, so the
first pvscan to run would need to "make up" for any devices
that had appeared previously, which the system was unable to
scan. The problem or idea of making up for missed scans is
historical and should no longer be needed, so remove this
special init case.
When pvscan is run for the initialization case (the first
pvscan run on the system), it scans all devs and creates
online files for all PVs it finds. Previously it would
then autoactivate every complete VG, but change this to
only autoactive the (complete) VG corresponding to the
named device arg(s).
- remove reference to locking_type which is no longer used
- remove references to adopting locks which has been disabled
- move some sanlock-specific info out of a general section
- remove info about doing automatic lockstart by the system
since this was never used (the resource agent does it)
- replace info about lvextend and manual refresh under gfs2
with a description about the automatic remote refresh
This reverts 518a8e8cfb
"lvmlockd: activate mirror LVs in shared mode with cmirrord"
because while activating a mirror LV with cmirrord worked,
changes to the active cmirror did not work.
When data are growing, adapt also size of metadata.
As we get way too many reports from users doing huge growths of
data portion while keep metadata small and avoiding using monitoring.
So to enhance the user-experience in case user requests grown of
thin-pool (without passing PV list for growth) - lvm2 will automaticaly
grown also the metadata part of thin-pool (if possible).
Add function for estimation of thin-pool metadata size for given size of
data. Function is using already existing internal API so it can
be reused for resize of thin-pool data.
Update the previous commit to leave the vgname as
an arg instead of moving it into the select option,
(the compound select option rule is confusing the
dlm arg processing.)
Using --select 'lvname=LV && vgname=VG' avoids the problem
of the lvchange exit code not distinguishing an actual error
result vs the VG or LV not existing. (This is in case there
is an odd dlm/gfs2 setup where some nodes are running the dlm
but do not have access to the VG.)
When lvextend extends an LV that is active with a shared
lock, use this as a signal that other hosts may also have
the LV active, with gfs2 mounted, and should have the LV
refreshed to reflect the new size. Use the libdlmcontrol
run api, which uses dlm_controld/corosync to run an
lvchange --refresh command on other cluster nodes.
When an LV is active with a shared lock, a command can be
run to change the LV with --lockopt skiplv (to override the
exclusive lock the command ordinarily requires which is not
compatible with the outstanding shared lock.)
In this case, other commands may have the LV active and may
need to refresh the LV, so print warning stating this.
Udev is running udev-rule action upon 'resume'.
However lvm2 in special case is doing replacement of
'soon-to-be-removed' device with 'error' target for resuming
and then follows actual removal - the sequence is usually quick,
so when udev start action - it can result in 'strange' error
message in kernel log like:
Process '/usr/sbin/dmsetup info -j 253 -m 17 -c --nameprefixes --noheadings --rows -o name,uuid,suspended' failed with exit code 1.
To avoid this - we need to ensure there is synchronization wait for udev
between 'resume' and 'remove' part of this process.
However existing code put strict requirement to avoid synchronizing with
udev inside critical section - but this originally came from requirement
to not do anything special while there could be devices in
suspend-state. Now we are able to see differnce between critical section
with or without suspended devices. For udev synchronization only
suspended devices are prohibited to be there - so slightly relax
condition and allow calling and using 'fs_sync()' even inside critical
section - but there must not be any suspended device.
Allow using caching with VDO.
User can either cache a single vdopool or
a vdo LV - difference when the caching is put-in depends on a use-case
and it's upto user to decide which kind of speed is expected.
Internal detection of SCSI device being in-use by DM mpath has been
performed several times for each component device - this could be
eventually racy - so instead when we do remember 1st. checked result
for device being mpath and use it consistenly over the filter runtime.
Move DM usage into dev_manager.c source file.
Also convert STATUS to INFO ioctl - as that's enough
to obtain UUID - this also avoid issuing unwanted flush on checked DM
device for being mpath.
Fix to previous commit
"pvscan: ignore online for shared and foreign PVs"
which was incorrectly considering a PV foreign if its
VG had no system ID when the host did have a system ID.
Activation would not be allowed anyway, but we can
check for these cases early and avoid wasted time in
pvscan managing online files an attempting activation.
This is the default bcache size that is created at the
start of the command. It needs to be large enough to
hold a single copy of metadata for a given VG, or the
VG cannot be read or written (since the entire VG would
not fit into available memory.)
Increasing the default reduces the chances of anyone
needing to increase the default to use their VG.
The size can be set in lvm.conf global/io_memory_size;
the lower limit is 4 MiB and the upper limit is 128 MiB.
When a single copy of metadata gets within 1MB of the
current io_memory_size value, begin printing a warning
that the io_memory_size should be increased.
which defines the amount of memory that lvm will allocate
for bcache. Increasing this setting is required if it is
smaller than a single copy of VG metadata.
and "cachepool" to refer to a cache on a cache pool object.
The problem was that the --cachepool option was being used
to refer to both a cache pool object, and to a standard LV
used for caching. This could be somewhat confusing, and it
made it less clear when each kind would be used. By
separating them, it's clear when a cachepool or a cachevol
should be used.
Previously:
- lvm would use the cache pool approach when the user passed
a cache-pool LV to the --cachepool option.
- lvm would use the cache vol approach when the user passed
a standard LV in the --cachepool option.
Now:
- lvm will always use the cache pool approach when the user
uses the --cachepool option.
- lvm will always use the cache vol approach when the user
uses the --cachevol option.
For users who do not want all of the fields included
in debug lines, let them specify in lvm.conf which
fields to include. timestamp, command[pid], and
file:line fields can all be disabled.
Without this, the output from different commands in a single
log file could not be separated.
Change the default "indent" setting to 0 so that the default
debug output does not include variable spaces in the middle
of debug lines.
Use the correct loop variable within the loop, instead of reusing the
initial value. Table lines after the first don't get terminated in
the right place.
Signed-off-by: Kurt Garloff <kurt@garloff.de>
When a VG has multiple PVs, and all those PVs come online
at the same time, concurrent pvscans for each PV will all
create the individual pvid files, and all will often see
the VG is now complete. This causes each of the pvscan
commands to think it should activate the VG, so there
are multiple activations of the same VG. The vg lock
serializes them, and only the first pvscan actually does
the activation, but there is still a lot of extra overhead
and time used by the other pvscans that attempt to
activate the already active VG. This can lead to a backlog
of pvscans and timeouts.
To fix this, this adds a new /run/lvm/vgs_online/ dir that
works like the existing /run/lvm/pvs_online/ dir. Each pvscan
that wants to activate a VG will first try to exlusively create
the file vgs_online/<vgname>. Only the first pvscan will
succeed, and that one will do the VG activation. The other
pvscans will find the vgname file exists and will not do the
activation step.
When a PV goes offline, the vgs_online file for the corresponding
VG is removed. This allows the VG to be autoactivated again
when the PV comes online again. This requires that the vgname be
stored in the pvid files.
Use a file lock to ensure that only one pvscan will do
initialization of pvs_online, otherwise multiple concurrent
pvscans may all see an empty pvs_online directory and
do initialization.
The pvscan that is doing initialization should also only
attempt to activate complete VGs.
When aay was included in the pvscan --cache command,
the activation part was complaining about the unusual
state of the hint file since it had been recreated
just prior.
udev_dev_is_md_component and udev_dev_is_mpath_component
are not used for obtaining the device list, but they still
use libudev for device info. When there are problems with
udev, these functions can get stuck. So, use the existing
obtain_device_list_from_udev config setting to also control
whether these "is component" functions are used, which gives
us a way to avoid using libudev entirely when it's causing
problems.
Just like we support for thin-pool syntax:
lvcreate --thinpool new_tpoolname -L Size vg
add same support logic with for vdo-poo:
lvcreate --vdopool new_vpoolname -L Size vg
Also move description of syntax bellow thin-pool, so it's
correctly ordered in generated man page.
Whenever thin-pool chunk size is unspecified and left for lvm calculation
try to select the size as nearest highest power-of-2 instead of
just being a multiple of 64KiB.
Fixing recent commit 022ebb0cfe
Resize already has size that needs to be counted with,
otherwise upsizing operation could turn into size reduction one.
Since the parse_vdo_pool_status() become vdo_manip API part,
and there will be no 'dm' matching status parser,
the API can be simplified and closely match thin API here.
Now with newer VDO kvdo target we can start to use standard mechanism
to enable resize of VDO volumes.
VDO pool can be grown.
Virtual volume grows on top of VDO pool when is not big enough.
Reduced VDOLV is calling discard for reduced areas - this can
take long time!
TODO: implement some pollable mechanism for out-of-lock TRIM.
When using 'lvcreate -l100%VG' and there is big disproportion between
real available space and requested setting - automatically fallback
to 100%FREE.
Difference can be seen when VG is big and already most space was
allocated, so the requestion 100%VG can end (and by spec for % modifier
it's correct) as LV with size of 1%VG. Usually this is not a big
problem - buit in some cases - like cache-pool allocation, this
can result a big difference for chunksize selection.
With this patch it's more closely match common-sense logic without
the need of reitteration of too big changes in lvm2 core ATM.
TODO: in the future there should be allocator solving all allocations
in a single call.
When using caches with BIG pool size (>TB) there is required
to use relatively huge chunk size. Once the chunksize has
got over 1MiB - kernel cache target stopped writing such chunks
back on this if the migration_threshold remained on default 1MiB
(2048 sectors) size.
This patch ensure, DM layer will not let pass table line which
has not big enough migration threshold that can let pass
at least 8 chunks (independently of lvm2 metadata).
lvm uses 'minimum_io_size' name to exactly match VDO naming here,
however in all common cases _size is using 'sector/512b' unit.
But in this case the value is in bytes and can have only 2 values:
either 512 or 4096.
It's probably not worth to rename it internaly, so we can just
drop comment - instead of using 1 or 8.
Thought let's think about it....
Lvm can at times have duplicate names. When this happens the daemon will
internally use vg_name:vg_uuid as the name for lookups, but display just
the vg_name externally. If an API user uses the Manager.LookUpByLvmId and
queries the vg name they will only get returned one result as the API
can only accommodate returning 1. The one returned is the first instance
found when sorting the volume groups by UUID.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1583510
When we have two logical volumes which switch their names at the
same time we are left with incorrect lookups. Anytime we find
an entry by doing a lookup by UUID or by name we will ensure
that the lookups are indeed correct.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1642176
An idea from Zdenek for better ensuring valid hints by invalidating
them when pvscan --cache <device> sees a new PV, which is a case
where we know that hints should be invalidated. This is triggered
from systemd/udev logic, and there may be some cases where it would
invalidate hints that the existing methods wouldn't detect.
If there are two independent scripts doing:
vgchange --lockstart vg
lvchange -ay vg/lv
The first vgchange to do the lockstart will wait for
the lockstart to complete before returning.
The second vgchange to do the lockstart will see that
the start is already in progress (from the first) and
will do nothing. This means the second does not wait
for any lockstart to complete, and moves on to the
lvchange which may find the lockspace still starting
and fail.
To fix this, make the vgchange lockstart command
wait for any lockstart's in progress to complete.
Save the list of PVs in /run/lvm/hints. These hints
are used to reduce scanning in a number of commands
to only the PVs on the system, or only the PVs in a
requested VG (rather than all devices on the system.)
The systemd generators are executed very early during the switch
from initramfs to system partition and the syslog is not yet fully
operational - it may cause blocking, if some debug logging is enabled
at the same time in /etc/lvm/lvm.conf log{} section.
To avoid timeouting and killing this generator - rather enhance lvm
code to suppress any syslog communication when LVM_SUPPRESS_SYSLOG
envvar is set.
Use of this envvar is needed since the parsing of i.e. cmdline options
that could eventually override lvm.conf setting happens in this case
way too late and number of lines could have been already streamed to
syslog.
Fix a scenario where global/event_activation setting is not found. In
this case we need to take default value just like lvm tools do when
executed. So use "lvmconfig --type full".
Also, if we fail to execute lvmconfig for whatever reason, fallback to
generating the activation units as failsafe action.
Reported by: Bastian Blank <waldi debian org>
When initializing an LV to hold the writecache, use wipe_lv()
which looks for specific signatures on the LV.
Wiping signatures is not necessary, but printing a warning
that names a specific signature (in addition to the existing
generic warning/confirmation) may help if a user accidentally
specifies the wrong LV which contains something important.
Detach function return 0 for error and 1 for success.
Add missing log errors from failing deactivation.
Add missing log error from failing synchronization.
In few cases error paths from initialization were returned as
'success == 1'.
Also assing num_mb with single compare checking valid sector_size.
For dumb compiler make num_mb always defined.
Since configure.h is a generated header and it's missing traditional
ifdefs preambule - it can be included & parsed multiple times.
Normally compiler is fine when defines have same value and there is
no warning - yet we don't need to parse this several times
and by adding -include directive we can ensure every file
in the package is rightly compile with configure.h as the
first header file.
If we are running the test where the device is /dev/* we will will
run the unit tests 'test_nesting' and 'test_pv_symlinks'. Otherwise
we will skip them.
When a VG is exported, the 'fullreport' returns an exit code of 5, but
otherwise returns the data we are wanting.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
In some cases we get stuck where we are unable to retrieve the current
state of lvm as we are encountering an error. When the error is
persistent we will log and exit the daemon instead of consuming vast
amounts of resources.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Drop very old original format of VDO target and focus on V2 version.
So some variables were renamed or replaced.
There is no compatibility preserved (with assumption so far this is
experimental feature and there is no real user).
Note - version currently VDO calls this version 6.2.
A bit of chicken & egg problem - dmeventd needs to use old libdm library.
VDO is only part of new device_mapper internal library.
So include directly source file for parsing status - this fixes usability
problem of VDO plugin introduced with previous Makefile reshaping
patchset.
NOTE: source file needs to be keep then compilable in both environments.
Also add missing copyright header.
This is a followup patch to commit edb72cb70c
to support related lvm2 test suite tests.
A 'global/support_mirrored_mirror_log' bool configuration variable gets
introduced allowing the creation of, or conversion to mirrored 'mirror'
logs if set. The capability to create these in turn allows the rest of
the tests to perform activation of such existing LVs and their conversions
to disk/core 'mirror' logs.
Display a disclaimer warning if enabled that this is not for regular use.
Add definition of the enabled config option to respective test scripts.
Related: rhbz1643562
With older gcc - we need to resolve symbols linked with devmapper-event
that is now using -ldevmapper.
Also add forgotten systemd library needed for dbus notification.
Avoid doing hard set of LIBS var,
so if the LIBS is set before 'include make.tmpl' it's not lost.
This gives better control over order of linked libraries.
Since there is very little change there will be any new devel going
to happing with cmirror - avoid eating extra disk space and link
with already installed libdm which implements all use basic
function of dm list
Since dmeventd is 'libdm' based project, it needs to link
libdm library instead of its internal version
An external users may provide plugins loadeable by dmeventd.
So external user of libdevmapper-event library has no other option
then to link with released libdevmapper library.
The complexity comes with lvm2 plugins.
The lvm2 plugin itself uses internal version of device_mapper,
but libdevmapper-event usage is libdm based - so there needs to be avoided
any breakage on compatibility of internal i.e. dm_task_run structures.
TODO: most likely dmeventd itself should be moved into libdm/dm-tools dir,
and only lvm2 plugins should be created as part of lvm project,
but those still need to link with libdevmapper.
If we don't know the meaning we will return the key with default text
instead of raising an exception and taking the daemon out in the
process.
Resolves: rhbz1657950
When we get bug reports we may not get the entire log, so lets
dump the fight recorder from newest to oldest as the one we
are interested in was likely to be the last command run.
Scenario: Given an existed LV `lvol0`, I want to create another LV
on the PVs used by `lvol0`.
I use `build_parallel_areas_from_lv()` to obtain the `pv_list` of each segments.
However, the returned `pv_list` is not properly initialized, which causes
segfault in subsequent operations.
Ensure configure.h is always 1st. included header.
Maybe we could eventually introduce gcc -include option, but for now
this better uses dependency tracking.
Also move _REENTRANT and _GNU_SOURCE into configure.h so it
doesn't need to be present in various source files.
This ensures consistent compilation of headers like stdio.h since
it may produce different declaration.
There's a small window during creation of a new RaidLV when
rmeta SubLVs are made visible to wipe them in order to prevent
erroneous discovery of stale RAID metadata. In case a crash
prevents the SubLVs from being committed hidden after such
wiping, the RaidLV can still be activated with the SubLVs visible.
During deactivation though, a deadlock occurs because the visible
SubLVs are deactivated before the RaidLV.
The patch adds _check_raid_sublvs to the raid validation in merge.c,
an activation check to activate.c (paranoid, because the merge.c check
will prevent activation in case of visible SubLVs) and shares the
existing wiping function _clear_lvs in raid_manip.c moved to lv_manip.c
and renamed to activate_and_wipe_lvlist to remove code duplication.
Whilst on it, introduce activate_and_wipe_lv to share with
(lvconvert|lvchange).c.
Resolves: rhbz1633167
In RHEL7 we marked mirrored mirror logs as deprecated and
added a related message. This patch prohibits creating new
'mirror' LVs with that log type or converting existing LVs
to have one.
Existing LVs with mirrored mirror log can be activated
and converted to disk/core logs.
Avoid double deprecation message when running lvconvert.
Resolves: rhbz1643562
Patch 668c9d0762 introduced regression,
since the code here would actually always return failing result.
Replace it with more simple call to strndup().
For some targets we do not want to generate dependencies.
Also add note about usage of such Makefile - it might be
possibly better to rename it to different filename to avoid
any confusion.
commit de28637
scan: use full md filter when md 1.0 devices are present
missed the fact that md superblock version 0.90 also puts
metadata at the end of the device, so the full md filter
needs to be used when either 0.90 or 1.0 is present.
. When using default settings, this commit should change
nothing. The first PE continues to be placed at 1 MiB
resulting in a metadata area size of 1020 KiB (for
4K page sizes; slightly smaller for larger page sizes.)
. When default_data_alignment is disabled in lvm.conf,
align pe_start at 1 MiB, based on a default metadata area
size that adapts to the page size. Previously, disabling
this option would result in mda_size that was too small
for common use, and produced a 64 KiB aligned pe_start.
. Customized pe_start and mda_size values continue to be
set as before in lvm.conf and command line.
. Remove the configure option for setting default_data_alignment
at build time.
. Improve alignment related option descriptions.
. Add section about alignment to pvcreate man page.
Previously, DEFAULT_PVMETADATASIZE was 255 sectors.
However, the fact that the config setting named
"default_data_alignment" has a default value of 1 (MiB)
meant that DEFAULT_PVMETADATASIZE was having no effect.
The metadata area size is the space between the start of
the metadata area (page size offset from the start of the
device) and the first PE (1 MiB by default due to
default_data_alignment 1.) The result is a 1020 KiB metadata
area on machines with 4KiB page size (1024 KiB - 4 KiB),
and smaller on machines with larger page size.
If default_data_alignment was set to 0 (disabled), then
DEFAULT_PVMETADATASIZE 255 would take effect, and produce a
metadata area that was 188 KiB and pe_start of 192 KiB.
This was too small for common use.
This is fixed by making the default metadata area size a
computed value that matches the value produced by
default_data_alignment.
The pvscan systemd service for autoactivation was
mistakenly dropped along with the lvmetad related
services.
The activation generator program now looks at the new
lvm.conf setting "event_activation" (default 1) to
switch between event activation and direct activation.
Previously, the old use_lvmetad setting was used to
switch between event and direct activation.
instead of a separate --writecacheblocksize option.
writecache block_size is not technically a setting,
but it can borrow the option as a special case.
fix lseek error check
fix read/write error checks
handle zero return from read and write
don't return an error for short io
fix partial read/write loop
io_setup() for aio may fail if a system has reached the
aio request limit. In this case, fall back to using
sync io. Also, lvm use of aio can be disabled entirely
with config setting global/use_aio=0.
The system limit for aio requests can be seen from
/proc/sys/fs/aio-max-nr
The current usage of aio requests can be seen from
/proc/sys/fs/aio-nr
The system limit for aio requests can be increased by
setting fs.aio-max-nr using sysctl.
Also add last-byte limit to the sync io code.
For embeded reshaping operation require higher driver version.
(otherwise we get:
Converting vg/LV1 from raid6 (same as raid6_zr) is directly possible to the following layouts:
raid6_nc
raid6_nr
raid6_la_6
raid6_ls_6
raid6_ra_6
raid6_rs_6
raid6_n_6
lvmpolld ATM is not desingned to preserve interval checking
in the same way the 'lvconvert' tool is doing - so the passed
'-i 40' is not respected and lvmpolld autonomously checks
state of conversion and updates lvm2 metadata and dm tables
when needed.
So skip portion of test that relayed on this and preserve this logic
only for command line invocation and forking of polling process
where the interval of checking is under full control.
Although we primarily want to check externally used libdevmapper
library, out internal all.h is still keeping all symbols
as the original library has - so for simpler compilation keep
using this private copy for defining needed symbols.
Just for case ensure compiler is not able to optimize
memset() away for resources that are released.
This idea of using memory barrier is taken from openssl.
Other options would be to check for 'explicit_bzero' function.
When preparing ioctl buffer and flatting all parameters,
add table parameters only to ioctl that do process them.
Note: list of ioctl should be kept in sync with kernel code.
DM_DEVICE_CREATE with table is doing several ioctl operations,
however only some of then takes parameters.
Since _create_and_load_v4() reused already existing dm task from
DM_DEVICE_RELOAD it has also kept passing its table parameters
to DM_DEVICE_RESUME ioctl - but this ioctl is supposed to not take
any argument and thus there is no wiping of passed data - and
since kernel returns buffer and shortens dmi->data_size accordingly,
anything past returned data size remained uncleared in zfree()
function.
This has problem if the user used dm_task_secure_data (i.e. cryptsetup),
as in this case binary expact secured data are erased from main memory
after use, but they may have been left in place.
This patch is also closing the possible hole for error path,
which also reuse same dm task structure for DM_DEVICE_REMOVE.
Add a little wait loop - since lvconvert started background process
and we need to wait till this bg task initiate its work -
adding ~1s loop should give reasonable enough time to start mirroring.
This could be seen as continuation of
6cee8f1b06.
Some test maching with old udev system shows problem,
where udev 'jumps on' leg device after mirror target
releases its legs - since udev does not (in this old case) skips
such device from scanning - it opens device - and this prevent
leg device to be deactivated - effectively such device stays
'leaked' in DM table invisibly to lvm2 command.
So to 'combat' this issue - if the device has '_mimage' in its name,
the retry of deactivation is automatically assumed.
NOTE: wider impact is unexpected - as it's touching only old mirror
target which is nowadays replaced with 'raid'.
In case there will be some problem identified - probably both patches
should be reverted.
With older systems and udevs we don't have control over scanning of lvm2
internal devices - so far we set retry-removal only for top-level LVs,
but in occasional cases udev can be 'fast enough' to open device for
scanning and prevent removal of such device from DM table.
So to combat this case - try to pass 'retry' flag also for removal of
internal device so see how many races can go away with this simple
patch.
Note: patch is applied only to internal version of libdm so the external
API remains working in the old way for now.
Commit 813347cf84 added extra validation,
however in this particular we do want to trim suffix out so rather ignore
resulting error code here intentionaly.
If a single, standard LV is specified as the cache, use
it directly instead of converting it into a cache-pool
object with two separate LVs (for data and metadata).
With a single LV as the cache, lvm will use blocks at the
beginning for metadata, and the rest for data. Separate
dm linear devices are set up to point at the metadata and
data areas of the LV. These dm devs are given to the
dm-cache target to use.
The single LV cache cannot be resized without recreating it.
If the --poolmetadata option is used to specify an LV for
metadata, then a cache pool will be created (with separate
LVs for data and metadata.)
Usage:
$ lvcreate -n main -L 128M vg /dev/loop0
$ lvcreate -n fast -L 64M vg /dev/loop1
$ lvs -a vg
LV VG Attr LSize Type Devices
main vg -wi-a----- 128.00m linear /dev/loop0(0)
fast vg -wi-a----- 64.00m linear /dev/loop1(0)
$ lvconvert --type cache --cachepool fast vg/main
$ lvs -a vg
LV VG Attr LSize Origin Pool Type Devices
[fast] vg Cwi---C--- 64.00m linear /dev/loop1(0)
main vg Cwi---C--- 128.00m [main_corig] [fast] cache main_corig(0)
[main_corig] vg owi---C--- 128.00m linear /dev/loop0(0)
$ lvchange -ay vg/main
$ dmsetup ls
vg-fast_cdata (253:4)
vg-fast_cmeta (253:5)
vg-main_corig (253:6)
vg-main (253:24)
vg-fast (253:3)
$ dmsetup table
vg-fast_cdata: 0 98304 linear 253:3 32768
vg-fast_cmeta: 0 32768 linear 253:3 0
vg-main_corig: 0 262144 linear 7:0 2048
vg-main: 0 262144 cache 253:5 253:4 253:6 128 2 metadata2 writethrough mq 0
vg-fast: 0 131072 linear 7:1 2048
$ lvchange -an vg/min
$ lvconvert --splitcache vg/main
$ lvs -a vg
LV VG Attr LSize Type Devices
fast vg -wi------- 64.00m linear /dev/loop1(0)
main vg -wi------- 128.00m linear /dev/loop0(0)
Since the test is currently directly working with live directory,
which can be getting updates from system's udev - add wait
for settling so removal of all known PVs happens after that.
But still this has major influce on behavior of running system,
so the test should never be executed on a user used box.
Check that type is always defined, if not make it explicit internal
error (although logged as debug - so catched only with proper lvm.conf
setting).
This ensures later type being NULL can't be dereferenced with coredump.
When sanlock_release returns an error because of an i/o
timeout releasing the lease on disk, lvmlockd should just
consider the lock released. sanlock will continue trying
to release the lease on disk after the original request
times out.
The lvmlock LV size was not adjusted correctly for 512 vs 4K
sector sizes which influence the lease size used by sanlock.
When lvmlock was automatically extended, the zeroing through
bcache wasn't working.
The choice about sector size and lease align size is
now made by the sanlock user, in this case lvmlockd.
This will allow lvmlockd to use other lease sizes in
the future. This also prevents breakage if hosts
report different sector sizes, or the sector size
reported by a device changes.
Since the stats handle is neither bound nor listed before the
attempt to call dm_stats_get_nr_regions(), it will always return
zero: this prevents reporting of any dmstats regions on any
device.
Remove the dm_stats_get_nr_regions() check and instead rely on
the correct return status from dm_stats_populate() which only
returns 0 in the case that there are regions to inspect (and
which logs a specific error for all other cases).
Reported-by: Bryan Gurney <bgurney@redhat.com>
It doesn't make sense to test or warn about the region count until
the stats handle has been listed: at this point it may or may not
contain valid information (but is guaranteed to be correct after
the list).
lvm uses a bcache block size of 128K. A bcache block
at the end of the metadata area will overlap the PEs
from which LVs are allocated. How much depends on
alignments. When lvm reads and writes one of these
bcache blocks to update VG metadata, it can also be
reading and writing PEs that belong to an LV.
If these overlapping PEs are being written to by the
LV user (e.g. filesystem) at the same time that lvm
is modifying VG metadata in the overlapping bcache
block, then the user's updates to the PEs can be lost.
This patch is a quick hack to prevent lvm from writing
past the end of the metadata area.
This reverts commit 16ae968d24.
We need to come up with a better fix, because we fall short
wiping all known signatures when not using the wipe_lv API.
lvm metadata writes, commits and activations are performed
for (newly) allocated RAID metadata SubLVs to wipe any preexisiting
data thus avoid false raid superblock positives on RaidLV activation.
This process can be interrupted by command or system crashs
thus leaving stale SubLVs in the lvm metadata as a problem.
Because we hold an exclusive lock in this metadata SubLV wiping
process, we can address this problem by avoiding aforementioned
commits/writes/activations altogether wiping the respective first
sector of the first physical extent allocated to any metadata SubLV
directly via the existing dev_set() API.
Succeeds all LVM RAID tests.
Related: rhbz1633167
When persistent_filter_create() fails, the existing passed filter
should be preserved, so it could be properly deleted on
error path - so new pfilter is assigned instead.
Thin plugin started to use configuble setting to allow to configure
usage of external scripts - however to read this value it needed to
execute internal command as dmeventd itself has no access to lvm.conf
and the API for dmeventd plugin has been kept stable.
The call of command itself was not normally 'a big issue' until users
started to use higher number of monitored LVs and execution of command
got stuck because other monitored resource already started to execute
some other lvm2 command and become blocked waiting on VG lock.
This scenario revealed necesity to somehow avoid calling lvm2 command
during resource registration - but this requires bigger changes - so
meanwhile this patch tries to minimize the possibility to hit this race
by obtaining any configurable setting just once - such patch is small
and covers majority of problem - yet better solution needs to be
introduced likely with bigger rework of dmeventd.
TODO: avoid blocking registration of resource with execution of lvm2
commands since those can get stuck waiting on mutexes.
%ghost should not be used for directories created by systemd-tmpfiles.
This may prevent package from working right after installation without
invoking systemd-tmpfiles.
See: https://pagure.io/packaging-committee/issue/439
Previously the size was limited by checking if the
old and new copies of the metadata overlapped.
This generally limited the size to about half of
the total space, but it could be larger given the
size differences between old and new. Now add a
direct check to limit the size to half the space.
Remove another instance of an invalid check for metadata
overflow during read. The previous instance was removed
in commit 5fb15b193.
This was checking for metadata that that overflowed the
circular disk metadata buffer during read, but such metadata
cannot be written, so it shouldn't be possible to find see.
Also, the check was incorrect and could trigger when there
was no overflow.
This fixes a problem in commit e6bb780d24, in which the
back compat handling for the old locking_type=4 was
incorrectly translated to mean the same thing as --readonly,
which prevented activation because activation uses an
exclusive vg lock. Previously, locking_type=4 allowed
activation.
If we see locking_type 4 in an old config, translate it to
the new combination of --readonly and --sysinit, which we
now define to mean the --readonly behavior with an exception
to allow activation.
The vg_write/vg_commit code was imprecise, uncommented, and
hard to understand. Rewrite it with clearer, cleaner code,
extensive comments, descriptions of how it works, and add
more info in debugging output.
The minor changes in behavior are to things that were
either incorrect or probably unintended:
- vg_write/vg_commit no longer check that the current vgname at
the start of the text metadata matches the vgname being written.
This has already been done at least twice by the time they are
called, and repeating it again against the same cached data has
no use.
- A fragment of old removed code had been left behind that checked
if the old unused alignment policy would wrap. It was still
being checked to decide if the metadata area was full, which
could possibly cause an incorrect full metadata failure.
- vg_remove now clears both the raw_locns in the mda_header that
point to committed metadata (raw_locn slot 0) and precommitted
metadata (raw_locn slot 1). Previously it fully cleared the
committed slot, and would only clear the offset field in the
precommitted slot if it saw a problem with the metadata in the
vg being removed.
- read_metadata_location_summary was wrongly comparing the number
of wrapped bytes with an offset to report an error about the
metadata being too large. This wrong check is removed, it
could have resulted in erroneous errors.
Commit 989626926c
introduced 2 new tests
lvconvert-raid-takeover-linear_to_raid4.sh and
lvconvert-raid-takeover-raid4_to_linear.sh
which involve raid reshaping.
Bump the checked dm-raid target version to 1.14.0
which has reshape kernel fixes to avoid test suite
runs to hang.
Bump target version to 1.14.0 which contains fixes
for reshape deadlock/corruption to allow tests to
run once the respective fixes show up in kernels.
Remove now superfluous multi-core checks.
Resolves: rhbz1501145
Related: rhbz1514539
Related: rhbz1586123
Related: rhbz1613039
Allow "lvconvert --type linear RaidLV" on a raid4 LV
providing convenient interim steps to convert to linear.
Add respective new test
lvconvert-raid-takeover-raid4_to_linear.sh
and
lvconvert-raid-takeover-linear_to_raid4.sh
for linear to raid4 once on it.
When converting from striped/raid0/raid0_meta
to raid6 with > 2 stripes, allow possible
direct conversion (to raid6_n_6).
In case of 2 stripes, first convert to raid5_n to restripe
to at least 3 data stripes (the raid6 minimum in lvm2) in
a second conversion before finally converting to raid6_n_6.
As before, raid6_n_6 then can be converted
to any other raid6 layout.
Enhance lvconvert-raid-takeover.sh to test the
2 stripes conversions to raid6.
Resolves: rhbz1624038
devices/scan_lvs (default 1) determines whether lvm
will scan LVs for layered PVs. The lvm behavior has
always been to scan LVs, but it's rare for LVs to have
layered PVs, and much more common for there to be many
LVs that substantially slow down scanning with no benefit.
This is implemented in the usable filter, and has the
same effect as listing all LVs in the global_filter.
Add "lvm2-activation-generator: " prefix for all kmsg messages written by
lvm2-activation-generator so we can identify the message in global system log.
We need to have Ceph RBD devices mapped first before use in a stack
where LVM is on top so make sure rbdmap.service is called before
generated lvm2-activation-net.service.
On shutdown, we need to stop blk-availability first before we stop the
rbdmap.service.
Resolves: rhbz1623479
This is the number of concurrent async io requests that
the scan layer will submit to the bcache layer. There
will be an open fd for each of these, so it is best to
keep this well below the default limit for max open files
(1024), otherwise lvm may get EMFILE from open(2) when
there are around 1024 devices to scan on the system.
"lvconvert --type linear RaidLV" on striped and raid4/5/6/10
have to provide the convenient interim layouts. Fix involves
a cleanup to the convenience type function.
As a result of testing, add missing sync waits to
lvconvert-raid-reshape-linear_to_raid6-single-type.sh.
Resolves: rhbz1447809
Conversion to striped from raid0/raid0_meta is directly possible.
Fix a regression setting superfluous interim raid5_n conversion type
introduced by commit bd7cdd0b09.
Add new test script lvconvert-raid0-striped.sh.
Resolves: rhbz1608067
With improved mirror activation code --splitmirror issue poppedup
since there was missing proper preload code and deactivation
for splitted mirror leg.
If a mirror LV is listed in read_only_volume_list, it would
still be activated rw. The activation would initially be
readonly, but the monitoring function would immediately
change it to rw. This was a regression from commit
fade45b1d1 mirror: improve table update
The monitoring function needs to copy the read_only setting
into the new set of mirror activation options it uses.
When vgcreate does an automatic pvcreate, it opens the
dev with O_EXCL to ensure no other subsystem is using
the device. This exclusive fd remained in bcache and
prevented activation parts of lvm from using the dev.
This appeared with vgcreate of a sanlock VG because of
the unique combination where the dev is not yet a PV,
so pvcreate is needed, and the vgcreate also creates
and activates an internal LV for sanlock.
Fix this by closing the exclusive fd after it's used
by pvcreate so that it won't interfere with other
bits of lvm that may try to use the device.
Conversions of LVs under snapshot to thinpool or cachepool
correctly fail but leave them inactive and provide cryptic
error messages like 'Internal error: #LVs (10) != #visible
LVs (2) + #snapshots (1) + #internal LVs (5) in VG VG'.
Reject and provide better error message.
Resolves: rhbz1514146
The 'lvconvert LV' command def has caused multiple problems
for command matching because it matches the required options
of any lvconvert command. Any lvconvert with incorrect options
ends up matching 'lvconvert LV', which then produces an error
about incorrect options being used for 'lvconvert LV'. This
prevents suggestions from nearest-command partial command matches.
Add a special case for 'lvconvert LV' so that it won't be used
as a partial match for a command that has options specified.
Native disk scanning is now both reduced and
async/parallel, which makes it comparable in
performance (and often faster) when compared
to lvm using lvmetad.
Autoactivation now uses local temp files to record
online PVs, and no longer requires lvmetad.
There should be no apparent command-level change
in behavior.
When lvmetad is not used, use temporary files to record
which PVs have appeared. Use these temp files to determine
when a VG is complete, to trigger autoactivation.
This change allows us to remove lvmetad while keeping the
same autoactivation behavior that lvmetad provides.
The temp files are created in /run/lvm/pvs_online/ and are
named for the PVID of the PV. The files contain the
major:minor of the device the PV was read from.
e.g. if VG foo has dev1 and dev2, then:
. pvscan --cache -aay dev1
reads vg metadata from dev1
creates /run/lvm/pvs_online/<pvid-of-dev1>
checks if all vg->pvs are online: no
. pvscan --cache -aay dev2
reads vg metadata from dev2
creates /run/lvm/pvs_online/<pvid-of-dev2>
checks if all vg->pvs are online: yes
autoactivates vg
A 'pvscan --cache dev' (without -aay) still records that
dev is online.
A 'pvscan --cache --major X --minor Y' after a device is
gone will remove the temp file for it.
A 'pvscan --cache [-aay]' (no devs) resets the state of
temp files by removing them all, then scanning all devs
and creating temp files for PVs that are found.
If no online files exist, the first pvscan --cache scans
all devs and creates temp files for any PVs found.
The scope of the temp files is only pvscan, and they are only
used for pvscan-based autoactivation. No other commands are
concerned with or aware of these temp files. When lvm creates
or removes PVs, no attempt is made to update the temp files.
Support vgchange usage with VDO segtype.
Also changing extent size need small update for vdo virtual extent.
TODO: API needs enhancements so it's not about adding ifs() everywhere.
When user create vdo-pool - use different automatic name.
So unlike with traditional LVs using lvol0, lvol1
use vpool0, vpool1...
TODO: apply similar for thin-pool & cache-pool...
Checks whether VDO support is enabled.
Detects presence of 'vdoformat' tool which is required for to format VDO pool.
ATM build of VDO is NOT automatically enabled (None is default).
To enable build of LVM with VDO support use:
configure --with-vdo=internal
TODO: Maybe future version may switch to link some small VDO library for formating
(would require linking and package dependency).
To support autoloading of VDO dm target driver loading of 'kvdo'
kernel module is needed - ATM it's not using 'dm-vdo' name.
So to support this strange name - add temporarily solution to
autoload kvdo kernel module in this case.
Introduce VDO plugin for monitoring VDO devices.
This plugin can be used also by other users, as plugin checks
for UUID prefix 'LVM-' and run lvm actions only on those
devices.
Non LVM- device are only monitored and log warnings
when usage threshold reaches 80%.
Update makefile to link with more libs since now whole liblvm-internal.a
is linked-in and this library has futher dependencies.
Avoid including deps for run-unit-test.
Drop linking separate status.c as it's already linked via internal libs.
Check allocation of thin-pool works on 2PVs, when one is so full,
that even metadata do not fit there (as they need at least 2M,
while 99% of 63MB fills >62MB)
When lvm2 command is executed in test mode, discard ioctl is skipped.
This may cause even data-loose in case, issuing discard for released
areas was enabled and user 'tested' lvreduce.
When allocating thin-pool with more then 1 device - try to
allocate 'metadataLV' with reuse of log-type allocation for mirror LV.
It should be naturally place on other device then 'dataLV'.
However due to somewhat hard to follow allocation logic code,
it's been rejected allocation in cases where there was not
enough space for data or metadata on single PV, thus to successed,
usage of segments was mandatory.
While user may use:
allocation/thin_pool_metadata_require_separate_pvs=1
to enforce separe meta and data LV - on default settings, this is not
enable thus segment allocation is meant to work.
NOTE:
As already said - the original intention of this whole 'if()' is unclear,
so try to split this test into multiple more simple tests that are more readable.
TODO: more validation.
When node loading fails, there is not much the caller can do,
since there is 'unknown' set of devices preloaded.
Only suspend during preload knows future precommitted 'metadata',
so it's non-trivial to drop 'preloaded' entries with any later call.
However dm tree tracks newly loaded entries - so in this case it
may simplify the recovery path by dropping preloaded entries so
they are not leaked in the DM table.
Allow creation of any virtual segment type with just --virtualsize
specified without any real extent size give.
TODO: likely --type error,zero might be later enhanced to use -V
(along with -L) - but since those targets do not allocate real
space, supporting -V makes sense with them.
Amound of linked libraries grows.
Most of them we don't need to lock in, since we are not using
them in locked section, so skip locking them in memory.
It's important to lock memory beforo running SUSPEND ioctl - but whole
lvm preload runs in memory unlocked environment - as in this phase
memory allocation is allowed and is meant to happen.
Once all targets are preload and ready (confirmed from all targets)
we start suspending tree - and here the memory allocation (or i.e.
opening files) is no longer allowed - as it may cause kernel deadlock.
Commit 3f35146 added a check on the value returned by the
_display_info_cols() function:
1024 if (!_switches[COLS_ARG])
1025 _display_info_long(dmt, &info);
1026 else
1027 r = _display_info_cols(dmt, &info);
1028
1029 return r;
This exposes a bug in the dmstats code in _display_info_cols:
the fact that a device has no regions is explicitly not an error
(and is documented as such in the code), but since the return
code is not changed before leaving the function it is now treated
as an error leading to:
# dmstats list
Command failed.
When no regions exist.
Set the return code to the correct value before returning.
For better code reuse split _node_send_messages into commont
messaging part and separate _thin_pool_node_send_messages.
Patch makes it possible to better reuse common code for messaging
other targets.
udev creates a train wreck of events if we open devices
with RDWR. Until we can fix/disable/scrap udev, work around
this by opening RDONLY and then closing/reopening RDWR when
a write is needed. This invalidates the bcache blocks for
the device before writing so it can trigger unnecessary
rereading.
It's no longer needed. Clustered VGs are now handled in
the same way as foreign VGs, and as shared VGs that
can't be accessed:
- A command processing all VGs sees a clustered VG,
prints a message ("Skipping clustered VG foo."),
skips it, and does not fail.
- A command where the clustered VG is explicitly
named on the command line, prints a message and fails.
"Cannot access clustered VG foo, see lvmlockd(8)."
The option is listed in the set of ignored options for
the commands that previously accepted it. (Removing it
entirely would cause commands/scripts to fail if they
set it.)
The md filter can operate in two native modes:
- normal: reads only the start of each device
- full: reads both the start and end of each device
md 1.0 devices place the superblock at the end of the device,
so components of this version will only be identified and
excluded when lvm uses the full md filter.
Previously, the full md filter was only used in commands
that could write to the device. Now, the full md filter
is also applied when there is an md 1.0 device present
on the system. This means the 'pvs' command can avoid
displaying md 1.0 components (at the cost of doubling
the i/o to every device on the system.)
(The md filter can operate in a third mode, using udev,
but this is disabled by default because there have been
problems with reliability of the info returned from udev.)
Since we are using "DefaultDependencies=no" we do not get automatic STOP
job on socket connection - so automatically refuse connection on
shutdown by adding this Conflict definition to socket Unit.
Shuffle code for better readability as set of conditions was
hard to follow.
Make it obvious the refresh & activate path is handling
monitoring and polling on its own.
So the only --monitor and --poll option needs explicit care.
Option --monitor without option --poll will now as a result
of this patch NOT start polling.
So command: vgchange --monitor n is no longer a polling starter.
Restoring polling for activated volumes lost with my recent commit:
75fed05d3e and move start of polling
directly into _activate_lvs_in_vg() - as there we know exactly
if there was some volume even activated.
Also make it sharing same code for pvscan -aay.
With the move to top-level makefile - there are some issues
with subdir recursive makefile.
Make the building more tolerant for now until fully resolved.
The previous method for forcibly changing a clustered VG
to a local VG involved using -cn and locking_type 0.
Since those options are deprecated, replace it with
the same command used for other forced lock type changes:
vgchange --locktype none --lockopt force.
Shared VGs will generally be started and activated by
the resource agent. Without the agent, this script doesn't
have a good way to know which LVs to activate.
vgreduce, vgremove and vgcfgrestore were acquiring
the orphan lock in the midst of command processing
instead of at the start of the command. (The orphan
lock moved to being acquired at the start of the
command back when pvcreate/vgcreate/vgextend were
reworked based on pvcreate_each_device.)
vgsplit also needed a small update to avoid reacquiring
a VG lock that it already held (for the new VG name).
A few places were calling a function to check if a
VG lock was held. The only place it was actually
needed is for pvcreate which wants to do its own
locking (and scanning) around process_each_pv.
The locking/scanning exceptions for pvcreate in
process_each_pv/vg_read can be enabled by just passing
a couple of flags instead of checking if the VG is
already locked. This also means that these special
cases won't be enabled unknowingly in other places
where they shouldn't be used.
When pvmoving LV - the target for LV is a mirror so the validation
that checked the type is matching was incorrect.
While we need a more generic enhancment of LVS output for pvmoved LVs,
for now at least stop showing internal errors and 'X' symbols in attrs.
The last commit related to this was incomplete:
"Implement lock-override options without locking type"
This is further reworking and reduction of the locking.[ch]
layer which handled all clustering, but is now only used
for file locking. The "locking types" that this layer
implemented were removed previously, leaving only the
standard file locking. (Some cluster-related artifacts
remain to be cleared out later.)
Command options to override or modify locking behavior
are reimplemented here without using the locking types.
Also, deprecated locking_type values are recognized,
and implemented as if one of the equivalent override
options was set.
Options that override file locking are:
. --nolocking disables all file locking.
. --readonly grants read lock requests without actually
taking a file lock, and refuses write lock requests.
. --ignorelockingfailure tries to set up file locks and
uses them normally if possible. When not possible, it
behaves like --readonly, but allows activation.
. --sysinit is the same as ignorelockingfailure.
. global/metadata_read_only acquires actual read file
locks, and refuses write lock requests.
(Some of these options could probably be deprecated
because they were added as workarounds to various
locking_type behaviors that are now deprecated.)
The locking_type setting now has one valid value: 1 which
refers to standard file locking. Configs that contain
deprecated values are recognized and still work in
largely the same way:
. 0 disabled all locking, now implemented like --nolocking
is set. Allow the nolocking option in all commands.
. 1 is the normal file locking setting and is unchanged.
. 2 was for external locking which was not used, and
reverts to normal file locking.
. 3 was for cluster/clvm. This reverts to normal file
locking, and prints messages about lvmlockd.
. 4 was equivalent to readonly, now implemented like
--readonly is set.
. 5 disabled all locking, now implemented like
--nolocking is set.
The options: --nolocking, --readonly, --sysinit
override, or make exceptions to, the normal file locking
behavior. Implement these by just checking for the
options in the file locking path instead of using
special locking types.
Basic LV functions:
activate_lv(), deactivate_lv(),
suspend_lv(), resume_lv()
were routed through the locking infrastruture on the way to:
lv_activate_with_filter(), lv_deactivate(),
lv_suspend_if_active(), lv_resume_if_active()
This commit removes the locking infrastructure from the
middle and calls the later functions directly from the former.
There were a couple of ancillary steps that the locking
infrastructure added along the way which are still included:
- critical section inc/dec during suspend/resume
- checking for active component LVs during activate
The "activation" file lock (serializing activation) has not
been kept because activation commands have been changed to
take the VG file lock exclusively which makes the activation
lock unused and unnecessary.
Make activation commands:
vgchange -ay, lvchange -ay, pvscan -aay
take an exclusive file lock on the VG to serialize
multiple concurrent activation commands which could
otherwise interfere with each other.
Four commands lock two VGs at a time:
- vgsplit and vgmerge already have their own logic to
acquire the locks in the correct order.
- vgimportclone and vgrename disable this ordering check.
Different flavors of activate_lv() and lv_is_active()
which are meaningful in a clustered VG can be eliminated
and replaced with whatever that flavor already falls back
to in a local VG.
e.g. lv_is_active_exclusive_locally() is distinct from
lv_is_active() in a clustered VG, but in a local VG they
are equivalent. So, all instances of the variant are
replaced with the basic local equivalent.
For local VGs, the same behavior remains as before.
For shared VGs, lvmlockd was written with the explicit
requirement of local behavior from these functions
(lvmlockd requires locking_type 1), so the behavior
in shared VGs also remains the same.
Remove the io error message from bcache.c since it is not
very useful without the device path.
Make the io error messages from dev_read_bytes/dev_write_bytes
more user friendly.
The options: --nolocking, --readonly, --sysinit
override, or make exceptions to, the normal file locking
behavior. Implement these by just checking for the
options in the file locking path instead of using
special locking types.
Basic LV functions:
activate_lv(), deactivate_lv(),
suspend_lv(), resume_lv()
were routed through the locking infrastruture on the way to:
lv_activate_with_filter(), lv_deactivate(),
lv_suspend_if_active(), lv_resume_if_active()
This commit removes the locking infrastructure from the
middle and calls the later functions directly from the former.
There were a couple of ancillary steps that the locking
infrastructure added along the way which are still included:
- critical section inc/dec during suspend/resume
- checking for active component LVs during activate
The "activation" file lock (serializing activation) has not
been kept because activation commands have been changed to
take the VG file lock exclusively which makes the activation
lock unused and unnecessary.
Make activation commands:
vgchange -ay, lvchange -ay, pvscan -aay
take an exclusive file lock on the VG to serialize
multiple concurrent activation commands which could
otherwise interfere with each other.
Four commands lock two VGs at a time:
- vgsplit and vgmerge already have their own logic to
acquire the locks in the correct order.
- vgimportclone and vgrename disable this ordering check.
Different flavors of activate_lv() and lv_is_active()
which are meaningful in a clustered VG can be eliminated
and replaced with whatever that flavor already falls back
to in a local VG.
e.g. lv_is_active_exclusive_locally() is distinct from
lv_is_active() in a clustered VG, but in a local VG they
are equivalent. So, all instances of the variant are
replaced with the basic local equivalent.
For local VGs, the same behavior remains as before.
For shared VGs, lvmlockd was written with the explicit
requirement of local behavior from these functions
(lvmlockd requires locking_type 1), so the behavior
in shared VGs also remains the same.
Remove the io error message from bcache.c since it is not
very useful without the device path.
Make the io error messages from dev_read_bytes/dev_write_bytes
more user friendly.
Add tests for linear <-> striped|raid* conversions.
Add region_size config to reshape tests to avoid test
failures in case of it being defined unexpectedly in lvm.conf.
Related: rhbz1439925
Related: rhbz1447809
"lvconvert --type {linear|striped|raid*} ..." on a striped/linear
LV provides convenience interim type to convert to the requested
final layout similar to the given raid* <-> raid* conveninece types.
Whilst on it, add missing raid5_n convenince type from raid5* to raid10.
Resolves: rhbz1439925
Resolves: rhbz1447809
Resolves: rhbz1573255
Fixes breakage from the recent libdm split. Though these didn't
ever appear to be linked (could they have piggy backed from libdevmapper.so
being linked to them?).
In this command, lvcreate creates a new LV and then combines
it with an existing cache pool, producing a cache LV. This
command was previously not allowed in in a shared VG.
When the lvmlockd lock is shared, upgrade it to ex
when repair (writing) is needed during vg_read.
Pass the lockd state through additional read-related
functions so the instances of repair scattered through
vg_read can be handled.
(Temporary solution until the ad hoc repairs can be
pulled out of vg_read into a top level, centralized
repair function.)
It's not an error if a command requests the global lock
when it has already acquired it. It shouldn't happen,
but there could be cases we've not found.
We have been warning about duplicate devices (and disabling lvmetad)
immediately when the dup was detected (during label_scan). Move the
warnings (and the disabling) to happen later, after label_scan is
finished.
This lets us avoid an unwanted warning message about duplicates
in the special case were md components are eliminated during the
duplicate device resolution.
The report uses process_each_vg() which populates lvmcache
based on a VG list from lvmetad. If there are no VGs,
but only orphan PVs, the orphans are not shown. Add an
explicit call to populate lvmcache with PV info from lvmetad.
This minor patch fixes grammar in a few messages which get
printed to users. It also fixes the same grammar mistake in
several comments.
Signed-off-by: Rick Elrod <relrod@redhat.com>
--
The device-mapper directory now holds a copy of libdm source. At
the moment this code is identical to libdm. Over time code will
migrate out to appropriate places (see doc/refactoring.txt).
The libdm directory still exists, and contains the source for the
libdevmapper shared library, which we will continue to ship (though
not neccessarily update).
All code using libdm should now use the version in device-mapper.
No point to start building lvm without this header file.
Although there could be 'some point' in supporting standalone build
of 'just' libdm where the libaio might be avoided.
TODO: think about configure option for building libdm only.
Unfortunatelly on kernels <4.16 lvm2 can't user brd ramdisks
for backend device as number of test is failing with this kernel
message:
device-mapper: ioctl: can't change device type after initial table load.
caused by DAX request-based handling, and lvm2 tries to replace device
with backend 'error' bio-based device and such table reload is being
rejected.
So ATM keep ramdisk only on most recent kernel to experiment a bit,
for older machines just stay safe and keep old slower loop backend.
As we start refactoring the code to break dependencies (see doc/refactoring.txt),
I want us to use full paths in the includes (eg, #include "base/data-struct/list.h").
This makes it more obvious when we're breaking abstraction boundaries, eg, including a file in
metadata/ from base/
While newer system can detect need for 4K mkfs, on older test machines
running test suite over 4k is reporting problems.
Some more generic solution is needed thought.
When test happens to run in tmpfs, it cannot use O_DIRECT (unsupported
with tmpfs).
CHECKME: unsure if detection of tmpfs is 'valid' but kind of works and
is very simple.
As Makefiles already do use target with name 'device-mapper'
rename this new device-mapper dir to non-conflicting name.
We also seem to already use '_' in other dir names.
Also rename device_mapper/Makefile to source for generating Makefile.in
so we can use it for build in other source dirs properly.
It's very hard to use some 'non-recurive' Makefiles with
rest of system running 'recursively'.
So ATM drop inclusion of subdir makefile and add support
for 2 new top-level targets:
unit-test (builds test/unit dir)
run-unit-test (build & run test/unit/unit-test run)
Just like 52656c89fd
when now cache is compiled in 'unditionally'.
This patch is actually enforce by changes in
commit: 2bc896f2a3
where CACHE value is not set anymore.
If the test does not need root, it can use 'SKIP_ROOT_DM_CHECK'.
For such test no actions needed root to initilize DM devices and
nodes will be take and test can check i.e. functional unit tests.
Usage of dm_delay looks to be slowing not just 'delayed' portion
of device, but due to the fact it's also slows down ANY flush
operation on such device it's overal speed impact is huge.
In some case we can however user other methods to slowdown disk writes,
in case of old dm 'mirror' target we can throttle I/O of mirror
synchronisation giving the next commands enough time to test couple
race conditions.
Usage:
throttle_dm_mirror [percentage]
Thtrottle down sync speed (lowest is '1' which is also default when
unspecified)
restore_dm_mirror
Restores the value of throttling before call of 'throttle_dm_mirror'
Usually it should '100'
Currently usage of loop device over backend file in ramdisk (tmpfs)
is actually causing unnecassary memory consution, since just
reading such loop device is causing RAM provisioning.
This patch add another possible way how to use ramdisk directly
through 'brd' device when possible (and allowed).
This however has it's limitation as well - brd does not support
TRIM, so the only way how to erase is to remove brd module ??
Alse there is 4K sector size limitation imposed by ramdisk.
Anyway - for some mirror test that were using large amount of
disk space (tens of MB) this brings noticable speed boost.
(But could be worth to solve the slowness of loop in kernel?)
To prevent using 'brd' for testing set LVM_TEST_PREFER_BRD=0
like this:
make check_local LVM_TEST_PREFER_BRD=0
This test can't use brd (ramdisk) as backend since for some
weird reason lsblk is not listing these device.
TODO: test could be probably rewritten to avoid using lsblk somehow??
When the backend device supports only 4K blocks (like ramdisk)
we cannot use for testing any smaller blocksize.
So recalc test for 4K extent size.
We may possibly introduce one list extra test that
can be executed on devices with 512b sectors to
check lvm2 support those min extent sizes...
ATM it's a bit ugly to enforce flushing of 'stdio' here, but works as quick
hot-fix.
log_print*() is using buffered I/O.
But for pooling with typical 1s interval this may take a while before
buffer about continues progress gets flushed.
So ATM fflush().
TODO: either add log_print*_with_flush() or maybe directly use just
line buffering with log_print() and only log_debug() keep using buffered
I/O mode.
md devices using an older superblock version have
superblocks at the end of the md device. For commands
that skip reading the end of devices during filtering,
the md component devs will be scanned, and will appear
as duplicate PVs to the original md device. Remove
these md components from the list of unused duplicate
devices, so they are treated as if they had been
ignored during filtering. This avoids the restrictions
that are placed on using PVs with duplicates.
All these functions are now used as utilities,
e.g. for ioctl (not for io), and need to
open/close the device each time they are called.
(Many of the opens can probably be eliminated by
just using the bcache fd for the ioctl.)
with the --labelsector option. We probably don't
need all this code to support any value for this
option; it's unclear how, when, why it would be
used.
An implementation of an adaptive radix tree. Has the following nice
properties:
- At least as fast as the hash table
- Uses less memory
- You don't need to give an expected size when you create
- It scales nicely (ie. no large reallocations like the hash table).
- You can iterate the keys in lexicographical order.
Only insert and lookup are implemented so far. Plus there's a lot
more performance to come.
Filters are still applied before any device reading or
the label scan, but any filter checks that want to read
the device are skipped and the device is flagged.
After bcache is populated, but before lvm looks for
devices (i.e. before label scan), the filters are
reapplied to the devices that were flagged above.
The filters will then find the data they need in
bcache.
This reverts commit 0931067dc5.
The dep files should be in the build dir, which is not necc. the src dir.
Easy to fix, but reverting for now until I have time to revisit.
The clvmd saved_vg data is independent from the normal lvm
lvmcache vginfo data, so separate saved_vg from vginfo.
Normal lvm doesn't need to use save_vg at all, and in clvmd,
lvmcache changes on vginfo can be made without worrying
about unwanted effects on saved_vg.
To avoid the chance of freeing a saved vg while another
code path is using it, defer freeing saved vgs until
all the lvmcache content is dropped for the vg.
In case "lvconvert -mN RaidLV" was used on a degraded
raid1 LV, success was returned instead of an error.
Provide message to inform about the need to repair first
before changing number of mirrors and exit with error.
Add new lvconvert-m-raid1-degraded.sh test.
Resolves: rhbz1573960
I don't like having this in a common header because it means you end
up including too much and causing unneccessary dependencies. eg,
lib/misc/lib.h includes libdevmapper.h, internationalisation, and
logging stuff.
There are likely more bits of code that can be removed,
e.g. lvm1/pool-specific bits of code that were identified
using FMT flags.
The vgconvert command can likely be reduced further.
The lvm1-specific config settings should probably have
some other fields set for proper deprecation.
The mixed up vg repair code in vg_read was trying
to repair a vg when vg_read was called by clvmd.
The clvmd daemon isn't supposed to be repairing
or writing a vg.
(This is a temporary workaround; vg repair will soon
be pulled out of vg_read so it can be called in a
controlled way and consolidated instead of spread
around.)
Shift refresh of mirror table right into monitor_dev_for_events().
Use !vg_write_lock_held() to recognize use of lvchange/vgchange.
(this shall change if this would no longer work, but requires
futher some API changes).
With this patch dm mirror table is only refreshed when necassary.
Also update WARNING message about mirror usage without monitoring
and display LV name.
When 'dmsetup' reports result with --nameprefixes it currently
incorrectly 'escapes' problematic characters.
Letting pass such string though shell 'eval' function is hard task.
So instead cut away substring.
Once dmsetup will start to properly escape backslash and apostrophe
this function may need further tuning.
Git handles symlinks, tar handles symlinks. So I've just put the
links themselves into git.
This simplifies dependencies a little, and stop some build loops I was
hitting.
External build dir now works too.
Git handles symlinks, tar handles symlinks. So I've just put the
links themselves into git.
This simplifies dependencies a little, and stop some build loops I was
hitting.
bcache_invalidate() now returns a bool to indicate success. If fails
if the block is currently held, or the block is dirty and writeback
fails.
Added a bunch of unit tests for the invalidate functions.
Fixed some bugs to do with invalidating errored blocks.
In some pvmove tests, clvmd uses the new (precommitted)
saved_vg, but then requests the old saved_vg, and
expects that the new saved_vg be returned instead of
the old. So, when returning the new saved_vg, forget
the old one so we don't return it again.
The filters save information about devices that should
be ignored, so if we need to repeat a scan (unusual,
but happens in clvmd), we need to update the filters.
When pvmove was run in background mode and forks
instead of using lvmpolld, the child pvmove process
was not clearing the bcache from the parent, so all
the aio ops in the child were failing.
When clvmd does a full label scan just prior to
calling _vg_read(), pass a new flag into _vg_read
to indicate that the normal rescan of VG devs is
not needed.
After reading a VG, stash it in lvmcache as "saved_vg".
Before reading the VG again, try to use the saved_vg.
The saved_vg is dropped on VG lock operations.
The copy of the VG which clvmd stashes in lvmcache should
not only be used between suspend and resume, but between
sequential LV operations in clvmd, so that clvmd does not
need to reread the VG for each one. Prepare for that by
renaming the stashed VG as "saved_vg".
Instead of using delayer device user 'zero' device and let mirror
do some real work which takes some time.
In case the test machine is too fast - mirror might need to be made bigger
to meet needed criteria.
Also move all test needed this 'zero' PV trick to the end of test
so $dev2 and $dev4 are covered with 'zero' and can take any amount of
write without consuming any real space.
For reporting commands (pvs,vgs,lvs,pvdisplay,vgdisplay,lvdisplay)
we do not need to repeat the label scan of devices in vg_read if
they all had matching metadata in the initial label scan. The
data read by label scan can just be reused for the vg_read.
This cuts the amount of device i/o in half, from two reads of
each device to one. We have to be careful to avoid repairing
the VG if we've skipped rescanning. (The VG repair code is very
poor, and will be redone soon.)
Don't allow writes in test mode. test mode should be
more sophisticated than just faking writes, and this
should be a last defense for cases where test mode is
not being checked correctly.
Recent changes allow some major simplification of the way
lvmcache works and is used. lvmcache_label_scan is now
called in a controlled fashion at the start of commands,
and not via various unpredictable side effects. Remove
various calls to it from other places. lvmcache_label_scan
should not be called from anywhere during a command, because
it produces an incorrect representation of PVs with no MDAs,
and misclassifies them as orphans. This has been a long
standing problem. The invalid flag and rescanning based on
that is no longer used and removed. The 'force' variation is
no longer needed and removed.
We can't let clvmd keep all scanned devs open,
which prevents them from being removed. So
drop the bcache data (and close fds) affter
doing a label scan.
Also set up bcache before the clvm-specific
vg_read (which needs to rescan the vg's devs
using bcache) and destroy the bcache after.
The error handling code wasn't working, but it
appears that just removing it is what we need.
The doesn't really need any different behavior
related to bcache blocks on an io error, it just
wants to know if there was an error.
In some odd cases (e.g. tests) there are very few devices
which results in creating too few blocks in bcache, so
create bcache with a minimum number of blocks.
When a PV is stacked on an LV, the LV will be kept in
bcache, and the open fd on the LV may interfere with
processing the LV. So, drop/close a bcache fd for
an LV before processing the LV.
Commands using lvmetad will not begin with a proper
label_scan which initializes bcache, but may later
decide they need to scan a set of devs, in which case
they'll need bcache set up at that point.
The improved detection of bad metadata when scanning
(where errors were ignored before) means we now have to
override some errors when forcibly erasing damaged metadata.
Drop an extra label scan in the recovery part
of vg_read. This is a temporary improvement
until the pending replacement for the broken
recovery code burried in vg_read.
This is a temporary hacky workaround to the problem of
reads going through bcache and writes not using bcache.
The write path wants to read parts of data that it is
incrementally writing to disk, but the reads (using
bcache) don't work because the writes are not in the
bcache. For now, add a dev to bcache before each attempt
to read it in case it's being used on the write path.
Create a new dev->bcache_fd that the scanning code owns
and is in charge of opening/closing. This prevents other
parts of lvm code (which do various open/close) from
interfering with the bcache fd. A number of dev_open
and dev_close are removed from the reading path since
the read path now uses the bcache.
With that in place, open(O_EXCL) for pvcreate/pvremove
can then be fixed. That wouldn't work previously because
of other open fds.
In the same way as the other process_each functions.
In the common case all the info that's needed can be
used from lvmcache after a label scan. But this means
that unchosen devs for duplicate PVs need to be handled
explicitly.
The copy of VG metadata stored in lvmcache was not being used
in general. It pretended to be a generic VG metadata cache,
but was not being used except for clvmd activation. There
it was used to avoid reading from disk while devices were
suspended, i.e. in resume.
This removes the code that attempted to make this look
like a generic metadata cache, and replaces with with
something narrowly targetted to what it's actually used for.
This is a way of passing the VG from suspend to resume in
clvmd. Since in the case of clvmd one caller can't simply
pass the same VG to both suspend and resume, suspend needs
to stash the VG somewhere that resume can grab it from.
(resume doesn't want to read it from disk since devices
are suspended.) The lvmcache vginfo struct is used as a
convenient place to stash the VG to pass it from suspend
to resume, even though it isn't related to the lvmcache
or vginfo. These suspended_vg* vginfo fields should
not be used or touched anywhere else, they are only to
be used for passing the VG data from suspend to resume
in clvmd. The VG data being passed between suspend and
resume is never modified, and will only exist in the
brief period between suspend and resume in clvmd.
suspend has both old (current) and new (precommitted)
copies of the VG metadata. It stashes both of these in
the vginfo prior to suspending devices. When vg_commit
is successful, it sets a flag in vginfo as before,
signaling the transition from old to new metadata.
resume grabs the VG stashed by suspend. If the vg_commit
happened, it grabs the new VG, and if the vg_commit didn't
happen it grabs the old VG. The VG is then used to resume
LVs.
This isolates clvmd-specific code and usage from the
normal lvm vg_read code, making the code simpler and
the behavior easier to verify.
Sequence of operations:
- lv_suspend() has both vg_old and vg_new
and stashes a copy of each onto the vginfo:
lvmcache_save_suspended_vg(vg_old);
lvmcache_save_suspended_vg(vg_new);
- vg_commit() happens, which causes all clvmd
instances to call lvmcache_commit_metadata(vg).
A flag is set in the vginfo indicating the
transition from the old to new VG:
vginfo->suspended_vg_committed = 1;
- lv_resume() needs either vg_old or vg_new
to use in resuming LVs. It doesn't want to
read the VG from disk since devices are
suspended, so it gets the VG stashed by
lv_suspend:
vg = lvmcache_get_suspended_vg(vgid);
If the vg_commit did not happen, suspended_vg_committed
will not be set, and in this case, lvmcache_get_suspended_vg()
will return the old VG instead of the new VG, and it will
resume LVs based on the old metadata.
When process_each_pv() calls vg_read() on the orphan VG, the
internal implementation was doing an unnecessary
lvmcache_label_scan() and two unnecessary label_read() calls
on each orphan. Some of those unnecessary label scans/reads
would sometimes be skipped due to caching, but the code was
always doing at least one unnecessary read on each orphan.
The common format_text case was also unecessarily calling into
the format-specific pv_read() function which actually did nothing.
By analyzing each case in which vg_read() was being called on
the orphan VG, we can say that all of the label scans/reads
in vg_read_orphans are unnecessary:
1. reporting commands: the information saved in lvmcache by
the original label scan can be reported. There is no advantage
to repeating the label scan on the orphans a second time before
reporting it.
2. pvcreate/vgcreate/vgextend: these all share a common
implementation in pvcreate_each_device(). That function
already rescans labels after acquiring the orphan VG lock,
which ensures that the command is using valid lvmcache
information.
The old code was doing unnecessary label scans when
checking to see if the new VG name exists. A single
label_scan is sufficient if it is done after the
new VG lock is held.
When lvmlockd indicates that the lvmetad cache is out of
date because of changes by another node, lvmetad_pvscan_vg()
rescans the devices in the VG to update lvmetad. Use the
new label_scan in this function to use the common code and
take advantage of the new aio and reduced reads.
This fixes the use of lvmcache_label_rescan_vg() in the previous
commit for the special case of independent metadata areas.
label scan is about discovering VG name to device associations
using information from disks, but devices in VGs with
independent metadata areas have no information on disk, so
the label scan does nothing for these VGs/devices.
With independent metadata areas, only the VG metadata found
in files is used. This metadata is found and read in
vg_read in the processing phase.
lvmcache_label_rescan_vg() drops lvmcache info for the VG devices
before repeating the label scan on them. In the case of
independent metadata areas, there is no metadata on devices, so the
label scan of the devices will find nothing, so will not recreate
the necessary vginfo/info data in lvmcache for the VG. Fix this
by setting a flag in the lvmcache vginfo struct indicating that
the VG uses independent metadata areas, and label rescanning should
be skipped.
In the case of independent metadata areas, it is the metadata
processing in the vg_read phase that sets up the lvmcache
vginfo/info information, and label scan has no role.
Move the location of scans to make it clearer and avoid
unnecessary repeated scanning. There should be one scan
at the start of a command which is then used through the
rest of command processing.
Previously, the initial label scan was called as a side effect
from various utility functions. This would lead to it being called
unnecessarily. It is an expensive operation, and should only be
called when necessary. Also, this is a primary step in the
function of the command, and as such it should be called prominently
at the top level of command processing, not as a hidden side effect
of a utility function. lvm knows exactly where and when the
label scan needs to be done. Because of this, move the label scan
calls from the internal functions to the top level of processing.
Other specific instances of lvmcache_label_scan() are still called
unnecessarily or unclearly by specific commands that do not use
the common process_each functions. These will be improved in
future commits.
During the processing phase, rescanning labels for devices in a VG
needs to be done after the VG lock is acquired in case things have
changed since the initial label scan. This was being done by way
of rescanning devices that had the INVALID flag set in lvmcache.
This usually approximated the right set of devices, but it was not
exact, and obfuscated the real requirement. Correct this by using
a new function that rescans the devices in the VG:
lvmcache_label_rescan_vg().
Apart from being inexact, the rescanning was extremely well hidden.
_vg_read() would call ->create_instance(), _text_create_text_instance(),
_create_vg_text_instance() which would call lvmcache_label_scan()
which would call _scan_invalid() which repeats the label scan on
devices flagged INVALID. lvmcache_label_rescan_vg() is now called
prominently by _vg_read() directly.
To do label scanning, lvm code calls lvmcache_label_scan().
Change lvmcache_label_scan() to use the new label_scan()
based on bcache.
Also add lvmcache_label_rescan_vg() which calls the new
label_scan_devs() which does label scanning on only the
specified devices. This is for a subsequent commit and
is not yet used.
New label_scan function populates bcache for each device
on the system.
The two read paths are updated to get data from bcache.
The bcache is not yet used for writing. bcache blocks
for a device are invalidated when the device is written.
When user configured lvm2 to NOT user monitoring, activated mirror
actually hang upon error and it's quite unusable moment.
So instead Warn those 'brave' non-monitoring users about possible
problem and activation mirror without blocking error handling.
This also makes it a bit simpler for test suite to handle trouble
cases when test is running without dmeventd.
When adjusting region size for clustered VG it always needs to fit
2 full bitset into 1MB due to old limits of CPG.
This is relatively big amount of bits, but we have still limitation
for region size to fit into 32bits (0x8000000).
So for too big mirrors this operation needs to fail - so whenever
function returns now 0, it means we can't find matching region_size.
Since return 0 is now 'error' we need to also pass proper region_size
when creating pvmove mirror.
Since extent_size is no longer power_of_2 this max region size
evalution was rather producing random bitsize as a combination
of lowest bit from number of extents and extent size itself.
Correct calculation to use whole LV size and pick biggest
possible power of 2 value smaller then UINT32_MAX.
Drop mirrored mirror log limitation that applies only in very limited
use-case and actually mirrored mirror log is deprecated anyway.
So 'disk' mirror log is selecting the correct minimal size, and
bigger size is only enforced with real mirrored mirror log.
Also for mirrored mirror log we let use 'smalled' region size if needed
so if user uses 1G region size, we still keep small mirror log
with much smaller region size in this case when needed.
Also mirror log extent calculation is now properly detecting error
with too big mirrors where previosly trimmed uint32_t was applies
unintentionally.
Whenever we make visible LV out of previously invisible one,
reload it's table - the is mandator for proper udev rule
processing as well as ensure content of dm table is correct.
TODO: this new generic rule probably make extra raid rules unnecessary.
Fixing regresion on argument acceptance where any lv can be passed
with paramaterless lvconvert which is meant to figure out needed
operation - i.e. wait for mirror synchronization.
User has no other 'effective' method to wait for mirror getting in-sync.
Since we support snapshot of mirrors, we do need to properly check
for stacked lock holder - fixes problem of pvmove in cluster
with mirrors under snapshot.
WHATS_NEW for this patch goes with 'Restore pvmove support...'
The current logic that avoids setting SYSTEMD_ALIAS and SYSTEMD_WANTS
on "change" events is flawed in the default "systemd background job"
configuration. For systemd, it's important that device properties don't
change spuriously.
If an "add" event starts lvm2-pvscan@.service for a device, and a
"change" event follows, removing SYSTEMD_ALIAS and SYSTEMD_WANTS from the
udev db, information about unit dependencies between the device and the
pvscan service can be lost in systemd, in particular if the daemon
configuration is reloaded.
Steps to reproduce problem:
- create a device with an LVM PV
- remove device
- add device (generates "add" and "change" uevents for the device)
(at this point SYSTEMD_ALIAS and SYSTEMD_WANTS are clear in udev db)
- systemctl daemon-reload
(systemd reloads udev db)
- vgchange -a n
- remove device
=> the lvm2-pvscan@.service for the device is still active although the
device is gone.
- add device again
=> the PV is not detected, because systemd sees the lvm2-pvscan@.service
as active and thus doesn't restart it.
The original purpose of this logic was to avoid volumes being scanned
over and over again. With systemd background jobs, that isn't necessary,
because systemd will not restart the job as long as it's active.
Signed-off-by: Martin Wilck <mwilck@suse.com>
Make the distinction between the cases with and without systemd
background jobs explicit in 69-dm-lvm-metad.rules rather than
substituting the rule from the Makefile. At this stage,
this improves only readibility, at the cost of one GOTO statement.
This patch introduces no functional change to the udev rules.
Signed-off-by: Martin Wilck <mwilck@suse.com>
Test that no (Sub)LV remnants persist if the volume group is
not listed in configuration variable activation/volume_list,
hence not activatable thus causing initialization of rmeta
SubLVs to fail.
Related: rhbz1161347
btrfs is using fake major:minor device numbers.
try to be smarter and detect used node via DM device name.
This shortens delays, where i.e. lvm2 is asked to deactivate
volume with mounted btrfs as such operation is not retryed
and user is informed about device being in use.
Correct testing with format 1 and mq policy.
Add testing of 'smq'
Fix testing with clvmd - where logged message is part of clvmd log
and we can only check command status.
Only policy 'smq' is meant to be used with format version 2.
Code used to let pass 'mq' policy also with format 2. But 'mq'
is obsoloted wth smq and kernel currently matches it. But this
is incompatible with older original mq logic - so disallow creation
of this rather useless combination.
Use 4K chunks since some older kernels are not capable
to create striped volumes with smaller size.
TODO: lvm2 should detect this ahead and avoid kernel
reporting "Invalid chunk".
Since this function is called with 'fd == -1', but Coverity can't see
this path can't be visited with this argument, add explicit check for
valid descriptor.
If the tools for checking thin_pool or cache metadata are missing,
issue rather just a WARNING, but let the operation of activation
continue.
This has the advantage, the if user is missing those tools,
but he already started to use thinpool or cacheing, he can
access these volumes with a WARNING.
Also if the user is using too old tools i.e. for CacheV2 format
dmpd tool 0.7 is required - provide informative WARNING and
skip failure from older tool version which can't understand
new format V2.
In case a newly created RaidLV is blacklisted using config
\"activation { volume list = [ ... ] }\" (i.e. its SubLVs stay inactive),
the metadata SubLVs can't get wiped thus failing the creation.
As a result, the RaidLV together with its SubLVs
is left behind in an inconsistent state.
Fix by removing the RaidLV and provide a hint about volume_list reasoning.
Resolves: rhbz1161347
While prioritized_section() based on raised priority works
nicely for standard lvm comman - separate counter is actually needed
when it's used in daemons like clvmd/dmeventd where priority
stays raised all the time.
Detect we are in prioritezed section instead of critical one,
since these operation were supposed to NOT be happining during
whole set of operation.
This patch fixes verification of udev operations.
Introduce prioritized_section() as a closer match to previous logic
of critical_section() that has been held over longer sequence of
ioctl commands - essentially it's matching operation on a single
cookie.
While 'critical_section()' now corresponds to locked memory - we hold
this memory only between suspend/resume thus notion of 'cookie' was
lost.
This patch restores some logic unintentionaly lost with dropping
memory locking for just activation/deactivation calls.
When function dm_stats_populate() returns 0 it's an error and needs
log_error() message - function can't have 'success' returning 0 or
error without reasons.
Prevent call of dm_stats_populate(), when there has been no
stats region detected for a DM device.
Such skip is evaluated as 'correct' visit of stats call and
not causing 'dmstats' command failure.
Resulting loop table line was streamed to 'stderr' stream - assuming this
was not a feature when user used '-v' for more verbose output
and properly show it via 'log_verbose()' on 'stdout'.
With these read errors it's useful to know the reason.
Also avoid to log error just once so we know exactly
how many times we did failing read.
On the other hand reduce repeated log_error() on code 'backtrace'
path and change severity of message to just log_debug() so the
actual read error is printed once for one read.
With problematic kernels raid devices can be occasionaly left with
'frozen' status - try to 'unfreeze' them with idle message on teardown.
Also replace couple greps with 'built-in' dmsetup --select feature.
Note: dmsetup --select currently reports 'No devices found' on stdout
and return success - looks like a bug to fix.
Just like lvm2 has internal devices like _tdata which is using UUID with
suffix, there is similar private type of device for crypto device where
they are using CRYPT-TEMP uuid prefix.
Also ignore stratis.
Some kernel version suffer from bad state transition where a device
steps into 'frozen' mode. Any application that tries to read such
raid gets unfortunatelly bloked.
As some sort of protection try to skip such raid device from being
scanned to minimize chances to block lvm2 command on such scan.
When such device is found, warning gets printed.
RaidLVs on read_only_volume_list have their SubLVs
activated readonly thus disabling metadata updates
or image resynchronization/recovery. Bug also causes
automatic repairs to fail.
Fix by always activating the RAID SubLVs readwrite.
Resolves: rhbz1208269
Just like with lvcreate, this lvconvert case also need to properly
check which LV actually holds lock for cached origin - as it might
be i.e. thin-pool tdata subLV.
When snapshot is created in read-only mode with 'lvcreate -s -pr...',
lvm2 still needs to be able to write to layered -cow volume
to store metadata and exceptions blocks.
TODO: in some case we might be able to do full tree with read-only
volume but this probably needs futher validation:
1. checking snapshot header already exist
2. origin & snapshot are both in read-only mode.
Occasionaly users may need to peek into 'component devices.
Normally lvm2 does not let users activation component.
This patch adds special mode where user can activate
component LV in a 'read-only' mode i.e.:
lvchange -ay vg/pool_tdata
All devices can be deactivated with:
lvchange -an vg | vgchange -an....
If componet devices could be activated alone, ensure they are not breaking
common commands.
TODO: mostly likely this is not a definite list of all needed checks
and more will come later.
This is the 'last' place where a LV is present in metadata.
Any removed device should not be left active in dm table.
So this check is an extra validation protection to capture any
forgotten deactivation (adding 1 extra ioctl into lvremove path)
Introduce:
lv_is_component() check is LV is actually a component device.
lv_component_is_active() checking if any component device is active.
lv_holder_is_active() is any component holding device is active.
When dmeventd thin plugin forks a configurable script, switch to use
execvp to pass whole environment present to dmeventd - so all configured
paths present at dmeventd startup are visible to script.
This was likely not a problem for common user enviroment,
however in test suite case variable like LVM_SYSTEM_DIR were
not actually used from test itself but rather from
a system present lvm.conf and this may have cause strange
behavior of a testing script.
Instead of checking with existing size of external origin LV,
use correctly the new 'wanted' size of this LV whether it fits
the limitiation requirements for older thin-pool target.
Otherwise code started to the the resize, updates metadata and
just fails during 'resize' in case the LV was active. For
inactive LV operation could have actually passed.
Checking here for cache_pool is not necessary and in effect
the check is not even right - since there are internal
states that do allow to active such LV.
Fix missing 'externalLV' traversing for thins with external origins.
Replace extra for_each_sub_lv_except_pools() with better
internal logic allowing selectively to cut of processed subLV tree.
Extend error code for function 'fn()' when it returns -1 it will
stop futher tree scan for given LV.
Also a bit simplify code to have only one place that
is calling 'fn()' and use level counter to know
depth of traversing.
Update renaming travering to skip trees for pools
and external origins.
This is somewhat tricky - for test suite we keep using
'set -e -o pipefail' - the effect here is - we get error report
from any 'failing' command in whole pipeline - thus when something
like this: 'lvs | head -1' is used - and 'head' finishes before
lead 'lvs' is done - it recieves SIGPIPE and exits with error,
and somewhat misleading gets occasionally reported depending
of speed of commands.
For this case we have to avoid using standard pipes and rather
switch to using streamed results with temporary output file.
This is all nicely handled with bash feature '< <()'.
For more info:
https://stackoverflow.com/questions/41516177/bash-zcat-head-causes-pipefail
While 'file-locking' code always dropped cached VG before
lock was taken - other locking types actually missed this.
So while the cache dropping has been implement for i.e. clvmd,
actually running command in cluster keept using cache even
when the lock has been i.e. dropped and taken again.
This rather 'hard-to-hit' error was noticable in some
tests running in cluster where content of PV has been
changed (metadata-balance.sh)
Fix the code by moving cache dropping directly lock_vol() function.
TODO: it's kind of strange we should ever need drop_cached_metadata()
used in several places - this all should happen automatically
this some futher thinking here is likely needed.
Improve pvmove to accept 'locally' active LVs together with
exclusive active LVs.
In the 1st. phase it now recognizes whether exclusive pvmove is needed.
For this case only 'exclusively' or 'locally-only without remote
activative state' LVs are acceptable and all others are skipped.
During build-up of pvmove 'activation' steps are taken, so if
there is any problem we can now 'skip' LVs from pvmove operation
rather then giving-up whole pvmove operation.
Also when pvmove is restarted, recognize need of exclusive pvmove,
and use it whenever there is LV, that require exclusive activation.
So this is a bit more complex and possibly worth futher checking.
ATM clvmd drops cmd->mem mempool AFTER refresh of cmd.
So anything allocating from cmd->mem during toolcontext init
will likely die at some point in time.
As a quick fix - just use regular malloc/free for 'dso' alloction.
It's worth to note - cmd->libmem seems to be often misused
causing hidden memleaking for clvmd.
Build dso plugin name during segtype initialisation and just
use the string during command life-time.
Also slightlt update message verbosity and make it very_verbose
when operation is going to be made and 'verbose' when it's done.
Avoid using same return code for reporting 2 different things
and stricly report error code by return value and add new
parameter for reporting monitoring status.
This makes easier to recognize which error we got from dm_event
and continue only with ENOENT.
Check if the generated vg name still fits the buffer.
So too long strings are rejected.
Drop -1 from size passed to snprintf - as the \0 is already included.
On occasional gcc releases it's better to specify also -ldevmapper
to linking logic for python object.
It's in fact more correct since the liblvm.c code is using
libdevmapper functions - that were linked in only via
liblvm2app library.
This partially reverts commit da37cbd24f.
As the _cmdline structure use mempool for allocated ellement
that is being release on cmd_context close.
Before the better fix is made - restore previous logic and
reinitialize cmd structures again for new cmd_context.
Problem can be hit with e.g. this test run:
make check_local T=foreign LVM_VALGRIND_DMEVENTD=1
Invalid read of size 1
at 0x4C31C83: strcmp (vg_replace_strmem.c:846)
by 0x6BA0939: _find_command (lvmcmdline.c:1555)
by 0x6BA4304: lvm_run_command (lvmcmdline.c:2810)
by 0x6BD5E02: lvm2_run (lvmcmdlib.c:91)
by 0x685607E: dmeventd_lvm2_run (dmeventd_lvm.c:118)
by 0x6652684: _use_policy (dmeventd_thin.c:117)
by 0x6652E56: process_event (dmeventd_thin.c:298)
by 0x10CC5A: _do_process_event (dmeventd.c:945)
by 0x10CF83: _monitor_thread (dmeventd.c:1033)
by 0x54B35E0: start_thread (in /usr/lib64/libpthread-2.26.9000.so)
by 0x57C30EE: clone (in /usr/lib64/libc-2.26.9000.so)
Address 0x6266270 is 4,352 bytes inside a block of size 8,192 free'd
at 0x4C2ED68: free (vg_replace_malloc.c:530)
by 0x5289142: dm_free_wrapper (dbg_malloc.c:393)
by 0x528998A: _free_chunk (pool-fast.c:318)
by 0x52892A6: dm_pool_destroy (pool-fast.c:78)
by 0x6A8E52C: destroy_toolcontext (toolcontext.c:2254)
by 0x6BA5BD6: lvm_fin (lvmcmdline.c:3327)
by 0x6BD5EA7: lvm2_exit (lvmcmdlib.c:123)
by 0x6856013: dmeventd_lvm2_exit (dmeventd_lvm.c:103)
by 0x66535B8: unregister_device (dmeventd_thin.c:432)
by 0x10CBBC: _do_unregister_device (dmeventd.c:926)
by 0x10CD74: _monitor_unregister (dmeventd.c:979)
by 0x10D094: _monitor_thread (dmeventd.c:1066)
by 0x54B35E0: start_thread (in /usr/lib64/libpthread-2.26.9000.so)
by 0x57C30EE: clone (in /usr/lib64/libc-2.26.9000.so)
Block was alloc'd at
at 0x4C2DBBB: malloc (vg_replace_malloc.c:299)
by 0x5288F46: dm_malloc_aux (dbg_malloc.c:287)
by 0x52890AC: dm_malloc_wrapper (dbg_malloc.c:371)
by 0x52898E6: _new_chunk (pool-fast.c:286)
by 0x52893BA: dm_pool_alloc_aligned (pool-fast.c:106)
by 0x5289310: dm_pool_alloc (pool-fast.c:90)
by 0x6A8A21A: _load_config_file (toolcontext.c:808)
by 0x6A8A3D9: _init_lvm_conf (toolcontext.c:842)
by 0x6A8D3BD: create_toolcontext (toolcontext.c:1941)
by 0x6BA5B24: init_lvm (lvmcmdline.c:3308)
by 0x6BD5B7C: cmdlib_lvm2_init (lvmcmdlib.c:34)
by 0x6BD5EB8: lvm2_init (lvm2cmd.c:20)
by 0x6855EA7: dmeventd_lvm2_init (dmeventd_lvm.c:67)
by 0x665305F: register_device (dmeventd_thin.c:352)
by 0x10CB7A: _do_register_device (dmeventd.c:916)
by 0x10CEE4: _monitor_thread (dmeventd.c:1006)
by 0x54B35E0: start_thread (in /usr/lib64/libpthread-2.26.9000.so)
by 0x57C30EE: clone (in /usr/lib64/libc-2.26.9000.so)
With pthreaded daemons like 'dmeventd' using liblvm via plugin,
lvm2 actually should not 'play' with streams at all - as there
could be parallel outputs running.
As a current quick workaround just disable change for pthreaded
program (gettid() != getpid()).
TODO: it's possible the change of buffering actually doesn't serve us
any measurable benefit and could be dropped as whole later...
Meanwhile this patch is fixing this occasional valgrind race report:
Invalid read of size 4
at 0x571892C: vfprintf (in /usr/lib64/libc-2.26.9000.so)
by 0x57216B3: fprintf (in /usr/lib64/libc-2.26.9000.so)
by 0x5042886: dm_event_log (libdevmapper-event.c:925)
by 0x10B015: _dmeventd_log (dmeventd.c:125)
by 0x10D289: _unregister_for_event (dmeventd.c:1146)
by 0x10E52E: _handle_request (dmeventd.c:1583)
by 0x10E6D7: _do_process_request (dmeventd.c:1631)
by 0x10E7C6: _process_request (dmeventd.c:1660)
by 0x1101A4: main (dmeventd.c:2285)
Address 0x6264d30 is 192 bytes inside a block of size 552 free'd
at 0x4C2ED68: free (vg_replace_malloc.c:530)
by 0x573907D: fclose@@GLIBC_2.2.5 (in /usr/lib64/libc-2.26.9000.so)
by 0x6AC5C00: reopen_standard_stream (log.c:189)
by 0x6A8E62C: destroy_toolcontext (toolcontext.c:2271)
by 0x6BA5C22: lvm_fin (lvmcmdline.c:3339)
by 0x6BD5EF3: lvm2_exit (lvmcmdlib.c:123)
by 0x6856013: dmeventd_lvm2_exit (dmeventd_lvm.c:103)
by 0x66535B8: unregister_device (dmeventd_thin.c:432)
by 0x10CBBC: _do_unregister_device (dmeventd.c:926)
by 0x10CD74: _monitor_unregister (dmeventd.c:979)
by 0x10D094: _monitor_thread (dmeventd.c:1066)
by 0x54B35E0: start_thread (in /usr/lib64/libpthread-2.26.9000.so)
by 0x57C30EE: clone (in /usr/lib64/libc-2.26.9000.so)
Block was alloc'd at
at 0x4C2DBBB: malloc (vg_replace_malloc.c:299)
by 0x573932B: fdopen@@GLIBC_2.2.5 (in /usr/lib64/libc-2.26.9000.so)
by 0x6AC5DC2: reopen_standard_stream (log.c:200)
by 0x6A8D11D: create_toolcontext (toolcontext.c:1898)
by 0x6BA5B6B: init_lvm (lvmcmdline.c:3319)
by 0x6BD5BC8: cmdlib_lvm2_init (lvmcmdlib.c:34)
by 0x6BD5F04: lvm2_init (lvm2cmd.c:20)
by 0x6855EA7: dmeventd_lvm2_init (dmeventd_lvm.c:67)
by 0x665305F: register_device (dmeventd_thin.c:352)
by 0x10CB7A: _do_register_device (dmeventd.c:916)
by 0x10CEE4: _monitor_thread (dmeventd.c:1006)
by 0x54B35E0: start_thread (in /usr/lib64/libpthread-2.26.9000.so)
by 0x57C30EE: clone (in /usr/lib64/libc-2.26.9000.so)
....
Process terminating with default action of signal 6 (SIGABRT): dumping core
at 0x570016B: raise (in /usr/lib64/libc-2.26.9000.so)
by 0x5701520: abort (in /usr/lib64/libc-2.26.9000.so)
by 0x57437D8: __libc_message (in /usr/lib64/libc-2.26.9000.so)
by 0x5743831: __libc_fatal (in /usr/lib64/libc-2.26.9000.so)
by 0x5744056: _IO_vtable_check (in /usr/lib64/libc-2.26.9000.so)
by 0x574751C: __overflow (in /usr/lib64/libc-2.26.9000.so)
by 0x574191A: fputc (in /usr/lib64/libc-2.26.9000.so)
by 0x50428E3: dm_event_log (libdevmapper-event.c:934)
by 0x10B015: _dmeventd_log (dmeventd.c:125)
by 0x10D289: _unregister_for_event (dmeventd.c:1146)
by 0x10E52E: _handle_request (dmeventd.c:1583)
by 0x10E6D7: _do_process_request (dmeventd.c:1631)
by 0x10E7C6: _process_request (dmeventd.c:1660)
by 0x1101A4: main (dmeventd.c:2285)
Some tools are typically installed into /usr/sbin (or /sbin) dir.
And some systems do not add this path to user's $PATH var.
Ensure sbin paths are looked through...
In fact pvmove does support 'clustered-core' target for clustered
pvmove of LVs activated on multiple nodes.
This patch restores support for activation of pvmove on all nodes
for LVs that are also activate on all nodes.
Actually the removed code is necessary - since not all writes are
getting alligned buffer - older compilers seems to be not able
to create 4K aligned buffers on stack - this the aligning code still
need to be present for write path.
Add protectional internall error whenever we spot activation
of 'exclusive' only segments in 'non-exclusive' mode.
TODO: possibly the activation locking could be enhanced to handle
this fully behind the scene - as for now this works purely for
lvchange/vgchange activation.
Use properly exclusive activation when reactivating origin after
snapshot merge (since origin must have been previously also exlusively
activated).
Same applies when converting volumes to thin-pool or cache.
Previously used 'only' local activation incorrectly allowed local
activation of some targets (i.e. raid) - thus 'leaking' chance to
activate same device on another node - which can be a problem
for device types like raid.
No longer use the external 'result' pointer internally to set up the
cached label. The callback _set_label_read_result() is now given the
internal label pointer directly
Callers that don't need the result are no longer required to pass a
label pointer into label_read().
If the data being requested is present in last_[extra_]devbuf,
return that directly instead of reading it from disk again.
Typical LVM2 access patterns request data within two adjacent 4k blocks
so we eliminate some read() system calls by always reading at least 8k.
Callers that read larger amounts of data now get a pointer to read-only
data directly without copying it through an intermediate buffer. This
data is owned by the device layer so the callers no longer free it.
If it obtains the data, it passes it into the supplied callback function
and returns 1. Otherwise the callback receives failed = 1.
Updated config_file_read_fd to use this and similarly return the data
via a callback fn of its own.
Dedicated functions are now used to process each piece of data obtained,
so the refactoring in this file gives us one for the vgsummary and one
for the metadata header. This new type of function takes two parameters
(for now), the obtained data plus a single struct (that must not
reference any data on the stack) that wraps up the entire context needed
to process it.
Sleep a bit before checking /sys/block dir so the kernel has a moment to
actually put scsi debug device in it...
Some quite old kernels are in troubles with this plain searching grep
without sleep (namely 2.6.32)
modprobe scsi_debug
<sleep .1>
grep -H scsi_debug /sys/block/*/device/model
modprobe -r scsi_debug
Rename dev_read() to dev_read_buf() - the function that reads data
into a supplied buffer.
Introduce a new dev_read() that allocates the buffer it returns and
switch the important users over to this. No caller may change the
returned data. (For now, callers are responsible for freeing it after
use, but later the device layer will take full ownership.)
dev_read_buf() should only be used for tiny buffers or unimportant code
(such as the old disk formats).
The creation of wrapped around metadata - where the start of metadata is
written up to the end of the buffer and the remainder follows back at
the start of the buffer - is now restricted to cases where writing the
metadata in one piece wouldn't fit. This shouldn't happen in 'normal'
usage so let's begin treating the code for this as a special case that
can be ignored when optimising 'normal' cases.
Add three new raid tests with io load and table
reloads during reshape for target 1.13.2.
Add a raid0 to raid10 conversion test.
Also add more signals to trap in lvconvert-raid-reshape-load.sh.
If there is sufficient space in the metadata area, align the next
metadata to a disk offset that is a multiple of 4096 bytes and
don't write it circularly. If it doesn't all fit at the end
of the metadata area, go back to the start and write it all there
contiguously.
If there is insufficient space to use the new stricter rules, revert to
the original behaviour, aligning on 512-byte boundaries wrapping around
the circular buffer as required.
Even after writing some metadata encountered problems, some commands
continue (rightly or wrongly) and attempt to make further changes.
Once an mda is marked MDA_FAILED, don't try to use it again.
This also applies when reverting, where one loop already skips
failed mdas but the other doesn't.
This fixes some device open_count warnings on relevant failure paths.
lvmdbusd was started, but the process was not recognized by pgrep.
- configure does not make the script executable - set the flag
explicitly when running make check,
- process name changed to lvmdbusd. The previous python3 value
originated from the use of /usr/bin/env.
Use new ALIGN_ABSOLUTE macro when calculating the start location
of new metadata and adjust the end of buffer detection so that
there is no longer an imposed gap between old and new metadata.
Currently both start and offset should always be divisible by alignment,
so this should have no effect, but a later patch will increase alignment
so these variables can no longer be optimised out.
lvmdbusd executable script must use python3 interpreter detected by
configure script, as site-packages directory used for library is only
used by that interpreter.
Although it doesn't look like it can be a measurable problem
and costs some time to flip priorities outside of activation window.
So just like with memory locking preserve priority until call
memlock_unlock() appears.
(addition to commit c086dfadc3).
Expand out the metadata wrapping calculations to prepare
to support a larger alignment.
The current alignment is 512 bytes so
(mdac_area_start + rlocn->offset) % alignment is zero.
When doing resume, directly pass location where new updated info
needs to be stored.
_resume_node() ensures the info is ONLY updated when the function
is successful and never changes it on error path.
Update the logic towards more explicit logic.
Preload tree normally does not want to resume, only
in certain cases of extension or new loaded nodes can be
resumed. So introduce new internal variable delay_resume_if_extended
controlable by target.
Patch itself is not changing current existing behaviour,
and rather documents existing problem in more readable way.
lvm2 needs to introduce explicit mechanism how to support more
fain-grained (and safe) logic to i.e. resize thin-pool which
can be sitting on cached raid volume.
Variable props.send_messages has 3 states and was not used properly
here. Activation in this moment does not need to verify thin-pool status
as that has been already checked on preload.
So only if there are some real messages (value 2) call function
for sending them.
Mark the first metadata area on each text format PV as MDA_PRIMARY.
Pass this information down to the device layer so that when
there are two metadata areas on a block device, we can easily
distinguish two independent streams of I/O.
In case of failed legs, raid replaces those with
e.g. "vg-lv_rimage_0-missing_0_0" mapped to an error target.
Those errouneously remain on deactivation.
Fix by removing them on deactivation/removal of the RaidLV.
Introduce enum dev_io_reason to categorise block device I/O
in debug messages so it's obvious what it is for.
DEV_IO_SIGNATURES /* Scanning device signatures */
DEV_IO_LABEL /* LVM PV disk label */
DEV_IO_MDA_HEADER /* Text format metadata area header */
DEV_IO_MDA_CONTENT /* Text format metadata area content */
DEV_IO_FMT1 /* Original LVM1 metadata format */
DEV_IO_POOL /* Pool metadata format */
DEV_IO_LV /* Content written to an LV */
DEV_IO_LOG /* Logging messages */
Code already has dereferenced UUID before this point,
and its already given we require name & uuid when ading new node
(although uuid could be empty string).
Just like everywhere else - use single if() for major:minor setup
(it basically can't fail as of today anyway)
Always leave funtion with correctly set pointers even on error path.
Replicator never really existed in upstream kernel and its support
got deprecated.
Also its support never got finished so no code is supposed to be
using it anyway.
Libdm symbols are remaining, just the implementation will always
return failure - so any user of:
dm_tree_node_add_replicator_dev_target()
dm_tree_node_add_replicator_target().
will now always recieve error message.
Separate handling of error code from _info_by_dev.
This error can only happeng when we are running out of memory.
In such case there is urgent need to stop any futher proceeding
of command and run to error ASAP.
Avoiding "$(get first_extent_sector "$d")" in the loop
allows the test to succeed in the cluster. Further cluster
analysis needed to get to the core reason.
The lvm2 test suite aims at small test resource footprints
(few PVs, small PV sizes) to run on tmpfs backed loop device.
OTOH, lvconvert-reshape-raid.sh aims to test the maxima of
supported total stripes of 64. This patch adds a prerequisite
conditional to skip tests using more than 14 stripes.
It requires the target version 1.13.1 to avoid deadlocks.
If the recovery of the repleced leg(s) of a RaidLV created without
initial resynchronization (i.e. "lvcreate --nosync ...") got
interrupted, it can't be extended because of the < 100% sync rate.
In case caller passes in changed stripe size when reshaping raid4/5
to 1 stripe aiming to convert to raid1 and optionally to linear,
ignore it to prevent data corruption.
Use new 3rd. state of trace_pvmove_deps == 2.
In this state we know, we have already seen the node and can skip futher
testing. Remainging value 1 signals we want to track, and value 0
is for ignoring tracking, but node is still checking in this case.
Reduces large amount of duplicate ioctl queries.
Check also all snapshosts when resume is requested,
the origin volume is already resume, but possibly
some subLV or snapshot LV could be suspended if
we are still in critical_section.
When entering any critical section, lvm2 used to lock process memory
and raised task priority to avoid problem with page swapping and minimize
time of having non-resumed devices in table.
With this patch, memory locking which which is expensive is only used when
entering 'suspending' section as only in this section there is risk
lvm could be suspending a device which later can be needed for paging.
Raised priority is still kept for all section entrances as this is
low-cost operation and may accelerate table resumes - although the real
impact can be still considered later.
When pvmove is finished and metadata are updated, the code missed
to merge possible mergable segments - so add explicit merging
call after pvmoved volumes are unlocked.
This avoids weird results where i.e. lvs could have been reporting
non-matching segments as lvs upon metadata read is doing silent segment
merging while dm table left after pvmove was still preserving
non-merged segments.
When large size number (>2^31) is given on command line it could be
misdetected and in certain cases lead to wrongly casted number.
So make sure all cases always do set _MAX number in case the value would
not fit within the supported range instead of getting some random value
within the range.
In most cases this was not a problem to detect, but i.e. stripesize
parameter might have been fooled by certain large numbers.
Rewrite validation of stripes and stripe_size args into more readable
sequential code.
Extend reading of stripes & stripes_size args so it better knows
defaults for types like striped raid.
TODO: this should really be a value obtained for segtype structure and
all the weird conditions and modification of stripes and stripe_size
around lvm2 code should be dropped.
ATM we want to support delayed resume purely in pvmove case.
So have libdm logic internal to recognize difference beween
pvmove and other targets that do use delayed resume.
This fixes problem introduced with commit aa68b898ff
for mirror-on-mirror or snapshot-on-mirror problem.
TODO: likely added new API call and let libdm user select
delayed nodes explicitely.
Use code which detectes handlers in a way, which is more
backward-compatible friendly.
Replace read of 'sysfs' uuid entry with dm ioctl call.
Use /sys/block/dm-X/holders path instead of
new path /sys/dev/block/major:minor/holders.
TODO:
There are few more occurencies of this logic around the code
so some abstract interface should be considered.
In some cases the message could be slightly misleading so use
here rather conditional.
TODO:
In future we may possibly further tune the message in case we are
certain the level of redundancy protection has not been reduced.
When pvmove is finished and does 'suspend/resume' on PVMOVE LV,
on resume path committed metadata are already showing 'standalone'
pvmove LV prepared just for removal.
However code should be able to 'resume' preloaded LV there were
participating in pvmove operation.
Previously this was all done in the 'tools' part of lvm2 code.
So the lvconvert upon pvmove finish had to explicitely call 'resume' on every such LV.
Now 'smarted' activation code is able to deduce and combine all information from
the active dm table and committed metadata so single call resolves
it all in one go.
Internally holders are detected by reading sysfs directory to capture
all needed UUID which are then looked in lvm2 metadata and all such
LVs are automatically collected into dmtree.
Replace complex code with standard lv_update_and_reload_origin().
Extra suspend should not be necessary.
(If they would be - dependency tree would have bug for fixing).
Propagate delayed resume at least for preload case in a simple way.
Currently PVMOVE depends on internal logic where 'mirror' with
corelog is 'possible' PVMOVE. In such case resume of 'created'
node is 'delayed'.
This is mostly an ugly internal hack - but for the moment being when we
add propagation for preload - it does work reasonable.
TODO: provide standard API and avoid this internal 'guessing'.
Only thin-pool with origin_only suspend is allowed to be not suspending anything.
In such case pairing resume will 'decrement' critical section counter.
Just like suspend handles preload for pvmove finish,
in similar way handle suspend of starting pvmove.
In this case the precommited metadata are checked for list of PVMOVEed
LVs and those are suspended in with committed metadata.
When sanlock or dlm lock managers return an error number
that we don't recognize, replace it with a generic -ELMERR
which is defined in the set of special lvmlockd error
numbers. Otherwise, an unknown lock manager error number
could be misinterpreted for something else if it happened
to overlap another set of error numbers (which they have
not thus far.)
These less common errors returned from sanlock should
also cause sanlock to retry the lock acquire:
- i/o timeout occurs during sanlock_acquire().
other i/o on the same disk as the leases can cause
sanlock i/o timeouts.
- low level disk paxos contention between hosts naturally
causes one host to not acquire the lease. There are a
couple special error numbers associated with these cases
that should just be recognized as a normal failure to
acquire the lease.
There is no need to differentiation between clustered VG and normal VG.
As the activation depends on locking type.
Use unconditionally locally exclusive activation for pvmove.
Whenever pvmove tree is going to be generated for suspend
and such LV has a user - use this 'using LV' to generate
correct dm tree holding all components.
LV is asked for resume, and its already resume and tool
is inside 'critical_section()' check if there is any suspended sub LV.
In that case 'resume' operation will not be skipped.
When activation of LVs fails prior pvmove start, try to deactivate
already activated LVs.
TODO: possibly remember which LVs where already activate and only those
take down - devices which are already in-use will stay active.
Only lv_committed() now uses vg->vg_committed and it appears redundant
if its contents match the enclosing VG so don't waste cycles creating it
when that's known to be true when no write lock is held so the struct
won't get modified.
- Use 'lvmcache' consistently instead of 'metadata cache'
- Always use 5 characters for source line number
- Remember to convert uuids into printable form
- Use <no name> rather than (null) when VG has no name.
The persistent filter should not be imported by any command that doesn't
use it so take addtional note of REQUIRES_FULL_LABEL_SCAN (for vgrename)
and introduce IGNORE_PERSISTENT_FILTER for vgscan and pvscan.
If the suspend/resume sequence would leave some device in suspend
for possible later resume, backup cannot be takes (fs holding backups
could be still frozen in critical section())
Move check for presence of raid4 into the right place
so there is no way how to hit activation of any LV
with raid4 on kernel which does not support it.
Commit 763db8aab0 rejects 2-legged
conversions to striped/raid0 but different messages are displayed
for raid0 or striped. This commit provides the same rejection messages.
raid4/5 LVs may only be converted to striped or raid0/raid0_meta
in case they have at least 3 legs. 2-legged raid4/5 are a result
of either converting a raid1 to raid4/5 (takeover) or converting
a raid4/5 with more than 2 legs to raid1 with 2 legs (reshape).
The raid4/5 personalities map those as raid1,
thus reject conversion to striped/raid0.
Resolves: rhbz1511047
In HA cluster, we have "clvm" resource agent to manage clvmd daemon.
The agent invokes clvmd like: "clvmd -T90 -d0", which always prints
a scaring error message:
"""
local socket: connect failed: No such file or directory
"""
When specifed with "-d" option, clvmd tries to check if an instance
of the clvmd daemon is already running through a testing connection.
The connect() will fail with this ENOENT error in such case, so supress
the error message in such case.
TODO: add missing error reaction code - since ofter log_error, program
is not supposed to continue running (log_error() is for reporting
stopping problems).
Signed-off-by: Eric Ren <zren@suse.com>
Check and prevent starting another snapshot merge before
exiting merging is finished.
TODO: we can possibly implement smarter logic to drop existing
merging and start a new one.
The lvchange-raid[456].sh test checks that mismatches can be detected
properly. It does this by writing garbage to the back half of one of
the legs directly. When performing a "check" or "repair" of mismatches,
MD does a good job going directly to disk and bypassing any buffers that
may prevent it from seeing mismatches. However, in the case of RAID4/5/6
we have the stripe cache to contend with and this is not bypassed. Thus,
mismatches which have /just/ happened to an area that now populates the
stripe cache may be overlooked. This isn't a serious issue, however,
because the stripe cache is short-lived and reasonably small. So, while
there may be a small window of time between the disk changing underneath
the RAID array and when you run a "check"/"repair" - causing a mismatch
to be missed - that would be no worse than if a user had simply run a
"check" a few seconds before the disk changed. IOW, it simply isn't worth
making a fuss over dropping the stripe cache before beginning a "check" or
"repair" (which we actually did attempt to do a while back).
So, to get the test running smoothly, we simply deactivate and reactivate
the LV to force the stripe cache to be dropped and then proceed. We could
just as easily wait a few seconds for the stripe cache to empty also.
When a "recover" is just starting for a RAID LV, it is possible to get
"idle" for the sync action if the status is issued quickly enough. This
is fine, the MD thread just hasn't gotten things going yet. However,
the /need/ for a "recover" should be marked in md->recovery and it would
be simple enough to fix the kernel so this doesn't happen. May eventually
want a separate bug for this, but for now it fits with RHBZ 1507719.
We always preferred and recommended socket activation for our services
so remove the Install section in related .service units which are unused
in this case and keep only the Install section in associated .socket
units.
Signed-off-by: Bastian Blank <waldi@debian.org>
Since vg_validate() now rejects LVs without segments and
insert_layer_for_segments_on_pv() gets just created
'layer_lv' without segment, it needs to be hidden
from vg->lvs during processing of _align_segment_boundary_to_pe_range()
as this function calls lv_validate() and now requires
vg to be consistent. LV is then put back into vg->lvs.
There are two known bugs in the lvconvert-raid-status-validation.sh
test. The first one I consider to be more of an annoyance (1507719).
The second one I consider to be more serious (1507729).
RHBZ 1507719 simply documents the fact that the three RAID status
fields may not always be coherent due to the way they are set and
unset when the MD thread is shutting down and starting up. For
example, the sync ratio may be 100% but the sync action may not
yet have switched to "idle" and the health characters may not yet
all be 'A's (i.e. the devices set to InSync).
RHBZ 1507729 is more serious. The sync ratio can be 100% for a
short period of time after upconverting linear -> RAID1. It is
reset to 0 once the MD sync thread gets to work on it. It does
this because, technically, the array /is/ in-sync if the new
devices are excluded - i.e. the data is 100% available and
consistent. I'm not sure what to do about this problem, but we'd
much rather not have this state that looks exactly like the
end of the process when the sync ratio is 100% because the
"recover" process finished, but the sync action and health
characters haven't been updated yet. Put simply, the problem
is that we can't tell if a sync is starting or finished based
on the status output.
Since 4fa5add6b1 ("pvcreate: Wipe cached
bootloaderarea when wiping label.") label_remove is responsible
for the lvmcache_del. (toollib and liblvm need fixing to share
the code.)
Preload reiserfs module for the case, fs is present/compiled for a
kernel but it's not present in memory.
Size reducition needs --yes confirmation to preceed for reiserfs.
Correct reported message when thin snapshot has been already merged.
So lvm2 is no longer reporting "Mergins of snapshot X will occur..."
(even with swapped names).
When an ignored metadata area gets flagged for use again, make sure the
code doesn't try to parse its old metadata. Firstly by trying to detect
this situation and skipping the read (while still remembering the
position reached in the circular buffer), and secondly by clearing the
invalid live metadata location on disk as a precaution when subsequently
writing out the precommitted metadata.
Problems showed up when a metadata area in one VG got moved to
another VG in ignored state (still holding metadata for the original
VG) and then later got brought into use in the new VG - only the header
should be read in this case, not any of the metadata content.
vgsplit shares the vg_rename code so that must only set the PV_MOVED_VG
flag introduced in commit 486ed10848
("vgmerge: Fix intermediate metadata corruption") on PVs that moved.
Since both lvcreate and lvconvert needs to check for same
type of allowed origin for snapshot - move the code into
a single function.
This way we also fix several inconsitencies where snapshot
has been allowed by mistake either through lvcreate or
lvconvert path.
Generation of man pages is generating lot of barely readable output.
For normal build quietize this a bit.
For original verbose build start to use 'make V=1'
(just like i.e. linux kernel does)
TODO: apply at more places...
Converting from one raid level to another, no changes
of stripes or stripesize can be requested because those
are subject to reshaping. I.e. the process requires to
takeover first and secondly request raid algorithm,
stripe or stripesize changes.
Ignore any related changes display warninngs
and proceed with the takeover.
Without this patch, a takeover requesting
stripesize change causes data corruption!
Just like with other vars support this:
make check_local T=xyz LVM_LOG_FILE_MAX_LINES=10000000
Allows easily to override existing line limit.
Also increase limiting size of logs per command since some of
our commands are becoming very verbose....
Add explaining message, when command was aborted due to the reach
of configure line number count (LVM_LOG_FILE_MAX_LINES)
for logging (used mainly with testing).
Last patch missed to mention, we've improved/fixed generated paths
in units and init.d shell scripts when lvm2 was plainly configured
with just i.e. --prefix.
Note: some distros might have fully specified --sbindir and
--usrsbindir - thus those very not seeing problems in generated paths.
Replace lowercase @sbindir@ with @SBINDIR@ which contains
fully decoded path.
Same with @usrsbindir@ which is also used with clvmd and cmirrord.
Also handle SYSCONFDIR for EnvironmentFile.
Patch fixes generated unit files with strings like:
ExecStart=${exec_prefix}/sbin/lvm
Introduce few more AC_SUBST vars for usage in *.in generation.
In some case we want to replace i.e. $sbindir with full path
instead of current ${exec_prefix}/sbin.
This patch provides:
USRSBINDIR
SBINDIR
DEFAULT_SYS_LOCK_DIR
SYSCONFDIR
At the same time properly use sbindir & usrsbindir with
lvm, fsadm, clvmd from one primary definition.
Do not allow to take snapshot of mirror/raid leg or log or metadata LV.
This was actually never supported, but user was able to create it,
and this put device stack in hardly fixable state (needs manual work).
This prevents such creation to pass.
Also improve validation when recreating snapshot volume type
from origin and COW volume.
Correction to function for extracting vgname out of lvconvert
parameters.
Avoid repeating some checks.
Add code to handle generic options which may provide vgname in its argument
and compare them all so they match to a single vgname (otherwise it's a
error).
Extract default (envvar) vgname only when no position nor optional vgname is
found.
Fixing regression instroduce with patchset started with commit:
1e2420bca8 (2.02.169)
split resize_crypt function in two.
a) Detect proper dm-crypt device type and count new --size
value for cryptsetup resize command.
b) Perform the resize
the bug in LUKS grow/shrink decision in fsadm was
masked due to fact that default LVM2 extent size
was larger than LUKS1 default data offset for dm-crypt
mapping. The new test address this bug.
lvcreate supports a 'conversion' when caching LV.
This normally worked fine, however in case passed LV was
thin-pool's data LV with suffix _tdata we have failed to early.
As the easiest fix looks dropping validation of name when
caching type is select - such name check will happen later
once the VG is opened again and properly detect if the LV
with protected name already exists and can be converted,
or will be rejected as ambigiuous operation requiring user
to specify --type cache | --type cache-pool.
Replaced the confusing device error message "not found (or ignored by
filtering)" by either "not found" or "excluded by a filter".
(Later we should be able to say which filter.)
Left the the liblvm code paths alone.
Fixes the following case with 3PVs and 3 legs "mirror" LV:
# lvcreate -l100%FREE --type mirror -m2 vg3
Insufficient free space for log allocation for logical volume .
Unable to allocate extents for mirror log.
Related: rhbz1269533
Activation lock has a primary purpose to serialize locking of individual
LV in case there is no other protecting mechanism for parallel
execution.
However in the case an activated LV is composed from several other LVs,
noone should be able to manipulate with those LVs as well.
This patch add a very 'naive' global VG activation locking in this case.
In the future we may introduce smarter function detecting minimal closed
graph components if this will appear as bottleneck
Patch checks if the VG Write lock is held - in this case we do not
need any more locking - command has exclusive access to VG.
In case we have clustered VG and we are activating an LV which does not
need other LVs - we also do not need any more locks.
In all other cases take respective lock - for single LV - use lvid,
for complex LVs use vgname.
Creating striped RaidLVs with lv size not divisible by region size
caused the region size to be adjusted:
# lvcreate --type raid5 -n region_check.32.00m_3 -i 3 -L 1g --nosync -R 32.00m raid_sanity
Using default stripesize 64.00 KiB.
Rounding size 1.00 GiB (256 extents) up to stripe boundary size <1.01 GiB(258 extents).
WARNING: New raid5 won't be synchronised. Don't read what you didn't write!
Using reduced mirror region size of 8.00 MiB
Logical volume region_check.32.00m_3 created.
Fix by not imposing "mirror" constraints on "raid".
Resolves: rhbz1404007
vgmerge suffers from a similar problem to the one fixed in commit
8146548d25 ("vgsplit: Fix intermediate
metadata corruption.")
When merging, splitting or renaming VGs, use a new PV status flag
PV_MOVED_VG to mark the PVs that hold metadata with the old VG name and
use this to provide PV-level granularity instead of incorrectly assuming
all PVs in the VG are the same.
Add these for dmeventd systemd unit (dm-event.service):
Before: shutdown.target
Conflicts: shutdown.target
This will cause the dmeventd to be properly stopped at shutdown (after
all the dmeventd clients unregistered their devices from monitoring)
with dm-event.service's stop action (there's no direct action defined
for the "stop" so systemd sends SIGTERM instead).
Before, we let dmeventd to get killed only as part of the very last
SIGTERM/SIGKILL for all the remaining processes late in the shutdown
sequence so we may have missed some logs if dmeventd encountered an
error during its shutdown (logging facilities are already off at this
late time in shutdown sequence).
Ref: https://www.redhat.com/archives/lvm-devel/2017-October/msg00000.html
When dmeventd receives SIGTERM/INT/HUP/QUIT it validates if exit is possible.
If there was any device still monitored, such exit request used to
be ignored/refused. This 'usually' worked reasonably well, however if there
is very short time period between last device is unmonitored and signal
reception - there was possibility such EXIT was ignored, as dmeventd has
not yet got into idle state even commands like 'vgchange -an' has already
finished.
This patch changes logic towards scheduling EXIT to the nearest
point when there is no monitored device.
EXIT is never forgotten.
NOTE: if there is only a single monitored device and someone sends
SIGTERM and later someone uses i.e. 'lvchange --refresh' after
unmonitoring dmeventd will exit and new instance needs to be
started.
If you send a SIGUSR1 (10) to the daemon it will dump all the
threads current stacks to stdout. This will be useful when the
daemon is apparently hung and not processing requests.
eg.
$ sudo kill -10 <daemon pid>
Make sure that any and all code that executes in the main thread is
wrapped with a try/except block to ensure that at the very least
we log when things are going wrong.
Changing the VG of a PV uses the same on-disk mechanism as vgrename.
This relies on recognising both the old and new VG names. Prior to this
patch the vgsplit code incorrectly provided the new VG name twice
instead of the old and new ones. This lead the low-level mechanism not
to recognise the device as already belonging to a VG and so paying no
attention to the location of its existing metadata, sometimes partly
overwriting it and then later trying to read the corrupt metadata and
issuing a checksum error.
In some cases we are seeing where there are no VGs, but the data returned from
lvm shows that the PVs have the following for the VG:
"vg_name":"[unknown]", "vg_uuid":""
The code was only checking for the exitence of the VG name and we called into
the function get_object_path_by_uuid_lvm_id which requires both the VG name and
the LV name to exist (asserts this) which results in the following stack trace:
Traceback (most recent call last):
File "/home/tasleson/lvm2/daemons/lvmdbusd/utils.py", line 563, in runner
obj._run()
File "/home/tasleson/lvm2/daemons/lvmdbusd/utils.py", line 584, in _run
self.rc = self.f(*self.args)
File "/home/tasleson/lvm2/daemons/lvmdbusd/fetch.py", line 26, in
_main_thread_load
cache_refresh=False)[1]
File "/home/tasleson/lvm2/daemons/lvmdbusd/pv.py", line 48, in load_pvs
emit_signal, cache_refresh)
File "/home/tasleson/lvm2/daemons/lvmdbusd/loader.py", line 37, in common
objects = retrieve(search_keys, cache_refresh=False)
File "/home/tasleson/lvm2/daemons/lvmdbusd/pv.py", line 40, in
pvs_state_retrieve
p["pv_attr"], p["pv_tags"], p["vg_name"], p["vg_uuid"]))
File "/home/tasleson/lvm2/daemons/lvmdbusd/pv.py", line 84, in __init__
vg_uuid, vg_name, vg_obj_path_generate)
File "/home/tasleson/lvm2/daemons/lvmdbusd/objectmanager.py", line 318,
in get_object_path_by_uuid_lvm_id
assert uuid
AssertionError
When executing in the main thread, if we encounter an exception we
will bypass the notify_all call on the condition and the calling thread
never wakes up.
@staticmethod
def runner(obj):
# noinspection PyProtectedMember
Exception thrown here
----> obj._run()
So the following code doesn't run, which causes calling thread to hang
with obj.cond:
obj.function_complete = True
obj.cond.notify_all()
Additionally for some unknown reason the stderr is lost.
Best guess is it's something to do with scheduling a python function
into the GLib.idle_add. That made finding issue quite difficult.
There's nothing special about /boot other than it's used during boot.
But when blkdeactivate is called either on all devices or including a
device where the /boot is on top, we should also include this mount
point when doing unmount before deactivation of supported devices.
The new blkdeactivate -r|mdraidoption wait causes blkdeactivate to wait
for any resync/recovery/reshape that is currently in progress before
deactivating the device.
If this option is used, blkdeactivate calls mdadm -W|--wait before
mdadm -S|--stop.
Revert dc50f2f4a0.
We're canonicalizing/escaping the names here and we're reusing the
variable name so the code doesn't need to use extra variables and
further assignments that may confuse us. Let's keep the code simple.
The
local name=(...$name)
is not the same as
local name
name=(...$name)
(I know various code-checking tools fuss about this and recommend
the 2nd way, but let's ignore those tools' nitpicking here please.)
There was a typo in blkdeactivate --dmoption/--lvmoption/mpathoption,
it had missing "s" at the end and it was not recognized properly, only
short names for the options (-d/-l/-m).
When certain cmd def RULE's fail, the error messages can
sometimes be confusing. This expands the error messages
to help clarify why the rule failed, especially in cases
where options are used incorrectly.
In a shared VG, only allow pvmove with a named LV,
so that only PE's used by the LV will be moved.
The LV is then activated exclusively, ensuring that
the PE's being moved are not used from another host.
Previously, pvmove was mistakenly allowed on a full PV.
This won't work when LVs using that PV are active on
other hosts.
Avoid starting test, when test dir has less then 50M of free space.
Better to crash early before letting die machine on weird crash
in OOM cases...
Also show free disk space when test starts
Enable handling of --poolmetadataspare so if user can prevent
creation of _pmspare volume during --repair operation (just
like during actual lvcreate or lvconvert) for pool volumes.
The following commands now pass the device list through a
--select|-S filter before processing:
suspend resume clear wipe_table remove deps status table
In a shared VG, lvconvert must be used to create thin pools
and cache pools, not the lvcreate variants of those commands.
Deny these cases early in lvcreate using the new command defs.
Denying these cases deeper in the code was missing some
cleanup of the partially completed command.
Revert the lvmlockd.c changes from:
commit 0bf836aa14
"tidy: prefer not using else after return"
The commit introduced at least one regression, which broke
lvcreate of a thin pool in a shared VG.
ATM we have several instances of daemonizing code.
Each has its 'special' logic so not completely easy
to unify them all into a single routine.
Start to unify them and use one strategy for rediricting
all input/outpus to /dev/null - use 'dup2' function for this
and open /dev/null before fork to make sure it's available.
When file-locking mode failed on locking, such description was leaked
(typically not an issue since command usually exists afterwards).
So shirt close() at the end of function and use it in all error paths.
Also make sure, when interrrupt is detected, it's really not holding
lock and returns 0.
lvmcache_foreach_mda() can fail for numerous reasons
and failing error code cannot be ignored (out-of-memory...)
TODO: might need more error handling tunning.
gcc warns here about storring 69 bytes in 64 byte array (losing
potentially 4 bytes from 'ls->name').
lvmlockd-core.c:2657:36: warning: ‘%s’ directive output may be truncated writing up to 64 bytes into a region of size 60 [-Wformat-truncation=]
snprintf(tmp_name, MAX_NAME, "REM:%s", ls->name);
^~
lvmlockd-core.c:2657:2: note: ‘snprintf’ output between 5 and 69 bytes into a destination of size 64
snprintf(tmp_name, MAX_NAME, "REM:%s", ls->name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Replaced with slightly better code - but it still misses error path what
to do if the name would be truncated... - so added FIXME.
Also using all bytes for snprintf() buffer size
(as the size is with \0 included)
After the internal lvmlock LV (holding sanlock leases) is
extended to hold more leases, it needs to be zeroed.
sanlock expects to see either zeroed blocks or blocks
initialized with leases.
currently, lvcreate for sanlock find the free lock offset
from the beginning of the lvmlock every time.
after created thousands of lvs, it will issue thousands of read
ios for lvcreate to find free lock offset.
remeber the last free lock offset will greatly reduce the impact
Signed-off-by: Zhang Huan <zhanghuan@huayun.com>
Fix code checking that the 2nd mda which is at the end of disk really
fits the available free space and avoid any DA and MDA interleaving when
we already have DA preallocated. This mainly applies when we're restoring
a PV from VG backup using pvcreate --restorefile where we may already have
some DA preallocated - this means the PV was in a VG before with already
allocated space from it (the LVs were created). Hence we need to avoid
stepping into DA - the MDA can never ever be inside in such case!
The code responsible for this calculation was already in
_text_pv_add_metadata_area fn, but it had a bug in the calculation where
we subtracted one more sector by mistake and then the code could still
incorrectly allocate the MDA inside existing DA. The patch also renames
the variable in the code so it doesn't confuse us in future.
Also, if the 2nd mda doesn't fit, don't silently continue with just 1
MDA (at the start of the disk). If 2nd mda was requested and we can't
create that due to unavailable space, error out correctly (the patch
also adds a test to shell/pvcreate-operation.sh for this case).
If the PV was originally created with a larger-than-default
metadata area the restored one wasn't and might not even be
large enough to hold the metadata!
Previously the cache remembered an existing bootloaderarea and
reinstated it (without even checking for overlap) when asked to
write out the PV. pvcreate could write out an incorrect layout.
Add the new concise format to dmsetup create, either as a single
command-line parameter or from stdin.
Based on patches submitted by
Enric Balletbo i Serra <enric.balletbo@collabora.com>.
Drop 'DMEVENT' make variable and use BUILD_DMEVENTD like with other daemons.
NOTE: by default we do not build dmeventd - maybe time to change
as lot of build targets basically do need dmeventd...
Switch to use SYSTEMD_LIBS and avoid linking systemd library with
every linked tool when dbus notification are enabled.
(TODO add missing testing for lib presence)
Check first if we need to even link -lrt - since clock functions
are normally emebeded with recent glibc (>=2.17)
Use standard RT_LIBS name.
Avoid duplicate test for realtime clock with lvmlockd
Show better error message when realtime clock support is missing or
disabled.
Link RT_LIBS explicitely with lvmlockd and lvmetad.
Avoid adding -g more then once for debug builds.
Avoid enabling DEBUG_MEM when we build multithreaded tools.
Link executables with -fPIE -pie and --export-dynamic LDFLAGS
Introduce PROGS_FLAGS to add option to pass flags for external libs.
Link lvm2 internally library only when really used.
Link DAEMON_LIBS with daemons.
Pass VALGRIND_CFLAGS internally
Set shell failure mode on couple places.
lvm2 warned about zeroing and too big chunksize (>=512KiB), but
only during lvconvert, so lvcreate was creating thin-pools
without any warning about possible slowness of thin provisioning
because of zeroing.
Create a new table output format that concisely shows multiple devices
on one line.
dmsetup table --concise [device...]
<dev_name>,<uuid>,<flags>[,<table>]*[;<dev_name>,<uuid>,<flags>[,<table>]*]*
Table lines are separated by commas.
Devices are separated by semi-colons.
Flags is currently 'ro' or 'rw' (and might be extended in a
yet-to-be-defined way in future).
Any comma, semi-colon or backslash within a field is quoted by a
preceding backslash.
The format can later be supplied as input to dmsetup or even to the
booting kernel as an alternative way to set up devices.
Based on patches submitted by
Enric Balletbo i Serra <enric.balletbo@collabora.com>.
Add an independent command definition for "vgchange --locktype",
and split the implementation out of the set of common metadata
changes. It is unlike normal metadata changes, and can only
be run by itself. (Changing the lock type is similar in
principle to changing the VG name or the VG system ID; it
effects the ability of any host to see or access the VG.)
At some point this command lost the ability to forcibly change
the lock type of a shared VG to "none" (making it a local VG).
This can be necessary to repair shared VGs (e.g. recovery steps
that occur in vg_read are disabled for shared VGs because
they are not locked properly, or recovering sanlock locks
when the PV holding them is lost.)
"vgchange --locktype none --lockopt force VG" is used as the
method of forcing the shared VG to become local so that it
can be repaired.
Since _deactivate_and_remove_lvs() is used in more then one place,
move the needed udev synchronization into this function so other
users automatically get correct fs state before next dm manipulation.
Assumption here is that this udev synchronization 'delay' may also
prevent to 'early' table reloads which might cause kernel problems
for md-core - but we may need more generic time-limited reload
frequency for raid devices.
Note: on udev-less system there will be almost no delay.
Commit 8a912d6dbc missed the wrong logic,
we use 2 vars 'dev' & 'mddev' and their usage can't be mixed.
So correctly separate them so mddev keeps name of MD device.
During test do a more close selection of visible devices.
If some test leaks a device with LVMTEST prefix, next
test should not be influnced (or parallel running one).
If the test is running in non-/dev dir - it's already protected
by full path with $PREFIX in it - however it test is running
in real /dev dir - there was no such protection and test
were confused when they have seen such leaked device.
Commit 9b4b5d449e started to accept
rather way to wide set of strings we do not want to take for size.
i.e. lvresize -t vg0/lvol0 -LNaNM
Restore check for 'digit || locales defined 'dot' | '.'
(as we tend to take '.' even if locales uses ',')
Explictely detect duplicate sing symbols and leave the rest of
double number validation on 'strtod()' function. This way
we can also accept size like:
lvcreate -L.1M
We already accept -L0.1M - but it's common to accept numbers
starting with leading '.' - just as 'strtod()' accepts it).
API for strtod() or strtoul() needs reset of errno, before it's being
called. So add missing resets in missing places and some also some
errno validation for out-of-range numbers.
Since we are reading size as (double) we can get way bigger
number then just plain int64. So to make this check actually
more valid and usable do a maxsize compare in 'double'.
Avoid reading already released memory and do a continue directly.
Invalid read of size 1
at 0x1201B0: main_loop (clvmd.c:931)
by 0x11F640: main (clvmd.c:666)
Address 0x72ddef0 is 32 bytes inside a block of size 224 free'd
at 0x4C30D18: free (vg_replace_malloc.c:530)
by 0x54D6FD1: dm_free_wrapper (dbg_malloc.c:357)
by 0x122E6E: process_work_item (clvmd.c:2034)
by 0x123003: lvm_thread_fn (clvmd.c:2085)
by 0x590A3A8: start_thread (pthread_create.c:465)
by 0x5C3C7FE: clone (in /usr/lib64/libc-2.25.90.so)
Block was alloc'd at
at 0x4C2FB6B: malloc (vg_replace_malloc.c:299)
by 0x54D6EF1: dm_malloc_aux (dbg_malloc.c:286)
by 0x54D6F1C: dm_zalloc_aux (dbg_malloc.c:291)
by 0x54D6F96: dm_zalloc_wrapper (dbg_malloc.c:345)
by 0x11F89C: local_rendezvous_callback (clvmd.c:731)
by 0x1203D2: main_loop (clvmd.c:964)
by 0x11F640: main (clvmd.c:666)
Initialize mutex upfront any debugging and fix this report:
Mutex reinitialization: mutex 0x485d20, recursion count 0, owner 1.
at 0x4C38480: pthread_mutex_init_intercept (drd_pthread_intercepts.c:821)
by 0x4C38480: pthread_mutex_init (drd_pthread_intercepts.c:830)
by 0x11F359: main (clvmd.c:562)
mutex 0x485d20 was first observed at:
at 0x4C38F63: pthread_mutex_lock_intercept (drd_pthread_intercepts.c:885)
by 0x4C38F63: pthread_mutex_lock (drd_pthread_intercepts.c:898)
by 0x11E920: debuglog (clvmd.c:254)
by 0x11F1D8: main (clvmd.c:527)
Switch from warn to log_error since this generated
failing return code for command so printing log_error()
is mandatory.
Happens with i.e. pvscan --cache meets crashing lvmetad.
Commit 34504855a7 introduced
flag LV_RESHAPE_DATA_OFFSET and used it to avoid incompatible
activation on older runtime.
Enhance vg_validate() raid checking functions with checks for it.
Patch 72a58ce4b0 was wronly placing
double quotes around this variable which we want to pass expanded,
as it's just set of 'space' device args ATM.
TODO consider using array[@] to make this cleaner.
Add shellcheck directive to skip warning here
Changes:
- BASH_SOURCE index was one off.
- The first line of stacktrace was pure confusion displaying executed
script together with innermost line number (which was either 125 when
STACKTRACE or 229 when skip was called.)
- We can safely ignore innermost call, as stack trace is always produced
by stacktrace function.
- It is safer to test for array length, instead of testing FUNCNAME is
main - if main function were introduced.
- Bashishm is safe to use as this function as a whole is relying on bash.
In order to reject out of place reshaping with segment data_offset
field on old runtime, add a respective segment type incompatibility
flag causing "+RESHAPE_DATA_OFFSET" to be suffixed to the segment
type name.
When reshape space is allocated anew, an update and reload is needed to
promote the new size to the cluster node with the exclusively active RaidLV
or reloading the RaidLV will fail with a size related error. Additionally,
store "data_offset <sectors>" with the RaidLV in the lvm2 metadata so that
it can be retrieved on cluster nodes.
Process allocation of reshape space on a 2-legged raid4/5 (interim layout
to convert from/to linear via raid1) properly in the cluster.
Resolves: rhbz1461562
Resolves: rhbz1448116
Use 1 logic for 2 loops tearing down left device.
First loops tries to remove all closed devices with 'normal' remove.
Second loop tries to replace those left devices with 'error' target.
We can't really sleep that much in teardown as it slows test too much.
So do a nested loop (similar to 'dmsetup remove_all') and keep
removing devices with open count == 0 as long as it works.
When we want to squash as much device as possible,
it's better to give it some delay, so devices have
some time to release it's resouces for next removal.
Also drop surrounding cookie processing and let each
dmsetup call run on its own.
Add missing get_devs.
When $7 is not given use empty string.
See if we can live with less RAM disk for PVs.
Drop limitation on single core as presence 1.12 should address this.
The checking order here has happend after TESTDIR was removed
resulting in weird further error on trap path.
Properly check for unexpected dmeventd before removing TESTDIR
since 'trap' codepath is still using it.
Also try to kill this unexpected dmeventd so testing is
not skipping all next dmeventd tests.
(Downside would be - if user would be accidentally starting
dmeventd by some regular system admin work - such dmeventd
might be killd if it's unused. It can't kill dmeventd in-use.
Fix mirror_images_on() to actually report something useful (thought
it might be tuned later).
So for now the function got through all '_mimages_' and compares
where the order of them is matching given list of devices.
Possible misspelling: FAILED_MIXED_STR may not be assigned, but FAIL_MIXED_STR is.
Possible misspelling: FAILED_MULTI_STR may not be assigned, but FAIL_MULTI_STR is.
Possible misspelling: FAILED_BLACK_STR may not be assigned, but FAIL_BLACK_STR is.
The blkid we call in 13-dm-disk.rules also returns identifiers for
partitions based on which the /dev/disk/by-part{uuid,label} and
gpt-auto-root symlinks should be created in the same manner as we
already create symlinks for filesystem labels and uuids.
This is because we handle blkid calls and symlink creation under
/dev/disk ourselves in our 13-dm-disk.rules for device-mapper devices
for us to have more control over this process.
See also https://lists.freedesktop.org/archives/systemd-devel/2017-July/039220.html
and original report http://tracker.ceph.com/issues/19489 for
the exact case where these symlinks were missing.
Fix the error messages when an unrecognized command is
run from a script. We shouldn't attempt to parse options
for an unrecognized command name, which causes misleading
errors about bad options, but rather exit right when we
know the command name is not valid. Also don't complain
about exiting without an error message when running a
script if no command didn't exist.
1. dm_uuid is 68 byte length, but buf is 64 which
will cause miss match uuid from lv lock manager
2. no lv lock_type path in dm config, use lock_args instead
Signed-off-by: Zhang Huan <zhanghuan@chinac.com>
If the activation step in lvcreate fails (e.g. the specified
minor number is already used), then the lvcreate is reverted,
but the LV lock in lvmlockd was not being unlocked or properly
freed.
Some lvconvert commands can be used directly on the data sublv:
lvconvert ... vg/pool_tdata
The correct LV lock to use in lvmlockd is the one on the pool LV.
Centralise editing of the client list into _add_client() and
_del_client(). Introduce _local_client_count to track the size of the
list for debugging purposes. Simplify and standardise the various ways
the list gets walked.
While processing one element of the list in main_loop(),
cleanup_zombie() may be called and remove a different element, so make
sure main_loop() refreshes its list state on return. Prior to this
patch, the list edits for clients disappearing could race against the
list edits for new clients connecting and corrupt the list and cause a
variety of segfaults.
An easy way to trigger such failures was by repeatedly running shell
commands such as:
lvs &; lvs &; lvs &;...;killall -9 lvs; lvs &; lvs &;...
Situations that occasionally lead to the failures can be spotted by
looking for 'EOF' with 'inprogress=1' in the clvmd debug logs.
Correctly skip the test when lvmdbusd is found already running.
For pgrep usage we need to add '-f -l' options to get python3 name
printed.
Remove no longer used 'pids' local var.
With commit 41c10034aa we actually
do require LV to be used with _vg_write_lv_suspend_commit_backup().
So write a proper separte single wrapper for write && commit && backup.
lvm_run needs to place NULL as the last element into argv[].
Otherwise we get:
Conditional jump or move depends on uninitialised value(s)
_command_required_pos_matches (lvmcmdline.c:1443)
_find_command (lvmcmdline.c:1610)
lvm_run_command (lvmcmdline.c:2770)
lvm2_run (lvmcmdlib.c:91)
Dmeventd reuses 'dm_task' struct for some STATUS operation, but due to
missing reinitization of dm_task target list, it has caused misprocesing
of recieved events as the parsed target has been simply added to the
list of existing status and cause multiple actions being called for
single event.
Since we discovered status reporting from 'md' goes from large set
of weird states we can't just decided based on this word.
So let it pass for rebuild and idle as well
and check for health devices afterwards.
Add function to adjust printing of percent values in better way.
Rounding here is going along following rules:
0% & 100% are always clearly reported with .0 decimal points.
Values slightly above 0% we make sure a nearest bigger
non zero value with given precission is printed
(i.e. 0.01 for %.2f will be shown)
For values closely approaching 100% we again detect and adjust value
that is less then 100 when printed.
(i.e. 99.99 for %.2f will be shown).
For other values we are leaving them with standard rounding mechanism
since we care mainly about corner values 0 & 100 which need to be
printed precisely.
When we want to report primary leg failure, check for intial 'a',
since otherwice 'Aa idle' is normally visible.
Also reset array of bit flags marking dead devices, once
plugin detects raid is in sync.
Functionality of ignore suspend devices is already granted by:
lvm2_disable_dmeventd_monitoring() -> init_run_by_dmeventd() ->
init_ignore_suspended_devices().
In fact plugins should never use --config because it has
some unpleasant technical issues.
When raid leg rimage device is marked as 'D'ead by mdcore,
lvm2 was not able to replace such device with allocate policy,
as device has not appared as missing.
Add detection of transiently failing devices.
Basically reverting commit 58a9f88b8c.
We can use origin_only in case we are snapshot's origin,
as we do support this stack.
So when we are 'uncaching' origin+snaps - we do need to reload only
origin and we do not need to play with snaps.
Handle change of 'region size' better and follow also standard rule
if the command can't success (i.e. size is already same) we return
error for all such cases.
Also log_pring more info about adjusted value (just like we
do for rounding)
Also avoid keep pointers on 'display_*' values - they are in
ringbuffer for immediate use - not to be kept across multiple calls
(as they could be already overwritten by later calls) - so dropped
seg_region_size_str
'lvdisplay -m' tried to go through NULL policy settings,
when such policy was not defined for CachedLV.
Patch is fixing display of cache-pool without defined settings,
as this is now a valid pool and we mostly want users to define
these settings when actually really caching a LV.
Since cache LV can be a stacked device, there is no real reason
trying to use slight optimised tree for origin_only cache reload
(it could be even wrongly implemented in this case).
We can easily go with stardard tree load here.
When user runs command like 'lvconvert --splitcache' the operation
might be actually either slow or not making any progress in kernel,
so lets give user a chance to abort such operation.
When user press 'Ctrl+C' device table is restored to pre-flushing state.
Remove explicit activation of SubLVs and let lv_update_and_reload()
perform the proper (pre-)loading sequencing of tables.
This avoids related callback functions which are removed.
Related: rhbz1448116
Related: rhbz1461526
Related: rhbz1448123
When lock-holding LV differs from actually request locked LV,
we drop origin_only flag as it has no use - it'd be applied
on completely different LV.
Example of problem:
Raid is thin-pool _tdata LV.
Raid run origin_only locking on stacked device.
As lock holder is discovered thinLV.
Whole origin_only operation is then applied only on thinLV
changing the meaning of whole operation.
NOTE: this patch does not change anything for LV that are
already top-level lock holding LVs (i.e. thinLVs, snahoshots/origins).
Disable until we have a proper fix for reshape space allocation,
switching it to begin/end of rimages and activation in the cluster.
Related: rhbz1448116
Related: rhbz1461526
Related: rhbz1448123
Commit 1fe4f80e45 in current version
introduced regression for a terminal user, as he could not enter 'n'
as answer. Add missing break for this case (No whats_new).
New tests to add checking for '100%' in-sync at start of "recover"
process (it shouldn't happen, but I've seen it before). Also,
check status over the whole cycle of various sync processes ("resync"
and "recover").
Enhance reporting code, so it does not need to do 'extra' ioctl to
get 'status' of normal raid and provide percentage directly.
When we have 'merging' snapshot into raid origin, we still need to get
this secondary number with extra status call - however, since 'raid'
is always a single segment LV - we may skip 'copy_percent' call as
we directly know the percent and also with better precision.
NOTE: for mirror we still base reported number on the percetage of
transferred extents which might get quite imprecisse if big size
of extent is used while volume itself is smaller as reporting jump
steps are much bigger the actual reported number provides.
2nd.NOTE: raid lvs line report already requires quite a few extra status
calls for the same device - but fix will be need slight code improval.
Current existing kernels reports status sometimes in weird form.
Instead of showing what is the exact progress, we need to estimate
this in-sync state from several surrounding states.
Main reason here is to never report 100% sync state for a raid device
which will be undergoing i.e. recovery.
Relative to last comit ddf2a1d656:
adjust the dm-raid target version to 1.12.0 which shows
mandatory kernel MD deadlock fixes related to reshaping
are presant in the kernel.
Related: rhbz1443999
First test in this file checks whether 'aa' is ever spotted during
a "recover" operation (it should not be). More tests should follow
in this file to look for oddities in status output - especially as
it relates to the sync_ratio, dev_health, and sync_action fields.
For the test clean-up, I was providing too many devices to the first
command - possibly allowing it to allocate in the wrong place. I was
also not providing a device for the second command - virtually ensuring
the test was not performing correctly at times.
This patch ensures that under normal conditions (i.e. not during repair
operations) that users are prevented from removing devices that would
cause data loss.
When a RAID1 is undergoing its initial sync, it is ok to remove all but
one of the images because they have all existed since creation and
contain all the data written since the array was created. OTOH, if the
RAID1 was created as a result of an up-convert from linear, it is very
important not to let the user remove the primary image (the source of
all the data). They should be allowed to remove any devices they want
and as many as they want as long as one original (primary) device is left
during a "recover" (aka up-convert).
This fixes bug 1461187 and includes the necessary regression tests.
Add the checks necessary to distiguish the state of a RAID when the primary
source for syncing fails during the "recover" process.
It has been possible to hit this condition before (like when converting from
2-way RAID1 to 3-way and having the first two devices die during the "recover"
process). However, this condition is now more likely since we treat linear ->
RAID1 conversions as "recover" now - so it is especially important we cleanly
handle this condition.
Previously, we were treating non-RAID to RAID up-converts as a "resync"
operation. (The most common example being 'linear -> RAID1'.) RAID to
RAID up-converts or rebuilds of specific RAID images are properly treated
as a "recover" operation.
Since we were treating some up-convert operations as "resync", it was
possible to have scenarios where data corruption or data loss were
possibilities if the RAID hadn't been able to sync completely before a
loss of the primary source devices. In order to ensure that the user took
the proper precautions in such scenarios, we required a '--force' option
to be present. Unfortuneately, the force option was rendered useless
because there was no way to distiguish the failure state of a potentially
destructive repair from a nominal one - making the '--force' option a
requirement for any RAID1 repair!
We now treat non-RAID to RAID up-converts properly as "recover" operations.
This eliminates the scenarios that can potentially cause data loss or
data corruption; and this eliminates the need for the '--force' requirement.
This patch removes the requirement to specify '--force' for RAID repairs.
Two of the sync actions performed by the kernel (aka MD runtime) are
"resync" and "recover". The "resync" refers to when an entirely new array
is going through the process of initializing (or resynchronizing after an
unexpected shutdown). The "recover" is the process of initializing a new
member device to the array. So, a brand new array with all new devices
will undergo "resync". An array with replaced or added sub-LVs will undergo
"recover".
These two states are treated very differently when failures happen. If any
device is lost or replaced while "resync", there are no worries. This is
because any writes created from the inception of the array have occurred to
all the devices and can be safely recovered. Even though non-initialized
portions will still be resync'ed with uninitialized data, it is ok. However,
if a pre-existing device is lost (aka, the original linear device in a
linear -> raid1 convert) during a "recover", data loss can be the result.
Thus, writes are errored by the kernel and recovery is halted. The failed
device must be restored or removed. This is the correct behavior.
Unfortunately, we were treating an up-convert from linear as a "resync"
when we should have been treating it as a "recover". This patch
removes the special case for linear upconvert. It allows each new image
sub-LV to be marked with a rebuild flag and treats the array as 'in-sync'.
This has the correct effect of causing the upconvert to be treated as a
"recover" rather than a "resync". There is no need to flag these two states
differently in LVM metadata, because they are already considered differently
by the kernel RAID metadata. (Any activation/deactivation will properly
resume the "recover" process and not a "resync" process.)
We make this behavior change based on the presense of dm-raid target
version 1.9.0+.
On conversion from raid10 to raid0 (takeover), all rmeta
devices and the rimage devices of mirrored stripes are
detached from the raid10 LV. The remaining rimage areas
are being shifted down into the slots of the detached
ones hence requiring renames to show proper _N suffix
sequences (e.g. 0,1,2,3 instead of 0,2,4,6). Only the
top-level raid10 LV has a cluster lock, not the detached
SubLVs thus their deactivation is impossible and e.g the
rename from *_rimage_6 to *_rimage_3 will fail. Fix by
activating exclusively before deactivating and removing.
Resolves: rhbz1448123
The file block count stored in the filemap_monitor was lazily
initialised at the time of the first check. This causes problems
in the case that the file has been truncated between this time and
the time the daemon started: the initial block count and current
block count match and the daemon fails to detect a change.
Separate the setting of the block count from the check and make a
call to update the value at the start of _dmfilemapd().
It's not an error to attempt to update regions from an fd that has
been truncated (or otherwise no longer has any allocated extents):
in this case, the call should remove all regions corresponding to
the group, and return an empty region table.
For proper usage of Cache kernel metadata format V2,
new cache_check tool is basically mandatory.
Print warning during configure time about this problem.
Prohibit activation of reshaping RaidLVs on incompatible
lvm2 runtime by storing e.g. 'raid5+RESHAPE' segment type
strings in the lvm2 metadata. Incompatible runtime not
supporting reshaping won't be able to activate those thus
avoiding potential data corruption.
Any new non-reshaping lvconvert command will reset the
segment type string from 'raid5+RESHAPE' to 'raid5'.
See commits
0299a7af1e and
4141409eb0
for segtype flag support.
When old snapshot is merged, lvm2 still can report some data about
merged 'snapshot' - i.e. it occupied space in VG.
This patch fixes regression from commit:
6fd20be629
and resolved RHBZ: 1460161
Avoid reporting 'checking result' as maybe - it should
clearly tell 'yes' or 'no'.
Just shuffle printed message to the place, where we
already know the 'maybe' answer.
So instead of printing 'unclear':
checking whether to enable libblkid detection of signatures when wiping... maybe
checking for BLKID... yes
checking whether to use udev-systemd protocol for jobs in background... maybe
checking for SYSTEMD... yes
show this:
checking for BLKID... yes
checking whether to enable libblkid detection of signatures when wiping... yes
checking for SYSTEMD... yes
checking whether to use udev-systemd protocol for jobs in background... yes
Code path missed validation of lvcreate --cachepool argument.
If the non cache-pool LV was passed in, code has still continued
further work and failed later on internal error. Validate this
condition at right place now.
When a combination of thin-pool chunk size and thin-pool data size
goes beyond addressable limit, such volume creation is directly
prohibited.
Maximum usable thin-pool size is calculated with use of maximal support
metadata size (even when it's created smaller) and given chunk-size.
If the value data size is found to be too big, the command reports
error and operation fails.
Previously thin-pool was created however lots of thin-pool data LV was
not usable and this space in VG has been wasted.
Only support RAID conversions on active LVs.
If we'd accept e.g. upconverting linear -> raid1 on inactive
linear LVs, any LV flags passed to the kernel aren't properly
cleared thus errouneously passing them on every activation.
Add respective check to lv_raid_change_image_count() and
move existing one in lv_raid_convert() for better messages.
If during the process of fetching current lvm state we experience an
exception we fail to call set_result on the queued_requests we were
processing. When this happens those threads block forever which causes
the service to stall infinitely. Only clear the queued_requests after
we have called set_result.
We were not adding background tasks to flight recorder. Add the meta
data to the flight recorder when we start the command and update the meta
data when the command is finished. Locking was added to meta data to
prevent concurrent update and returning string representation as these can
happen in two different threads.
vgreduce previously allowed --all and --removemissing together even though
it only actual did the remove missing. The lvm dbus daemon was passing
--all anytime there was no entries in pv_object_paths. This change supplies
--all if and only if we are not removing missing and the pv_object_paths
is empty.
Vgreduce has and continues to enforce the invalid combination of supplying a
device list when you specify --all or --removemissing so we do not need
to check for that invalid combination explicitly in the lvm dbus service as
it's already covered.
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1455471
Warn about a PV that has the in-use flag set, but appears in
the orphan VG (no VG was found referencing it.)
There are a number of conditions that could lead to this:
. The PV was created with no mdas and is used in a VG with
other PVs (with metadata) that have not yet appeared on
the system. So, no VG metadata is found by lvm which
references the in-use PV with no mdas.
. vgremove could have failed after clearing mdas but
before clearing the in-use flag. In this case, the
in-use flag needs to be manually cleared on the PV.
. The PV may have damanged/unrecognized VG metadata
that lvm could not read.
. The PV may have no mdas, and the PVs with the metadata
may have damaged/unrecognized metadata.
A PV holding VG metadata that lvm can't understand
(e.g. damaged, checksum error, unrecognized flag)
will appear as an in-use orphan, and will be cleared
by this repair code. Disable this repair until the
code can keep track of these problematic PVs, and
distinguish them from actual in-use orphans.
Reject any stripe adding/removing reshape on raid4/5/6/10 because
of related MD kernel deadlock on single core systems until
we get a proper fix in MD.
Related: rhbz1443999
Since lvmetad is using 'MISSING' in status for 'another' purpose,
we need to support ATM also flag get from this place.
Until fixed better - we accept both flags - alhough lvm2 will
only print in flags.
Switch METADATA_FORMAT flag usage to be stored via segtype
instead of 'status' flag which appeared to cause major
incompatibility troubles.
For backward compatiblity segtype flags are still accepted also
via 'status' bits which were used from version 2.02.169 so metadata
saved by this newer lvm2 version should still work nicely, although
new save version will no longer work on this older lvm2 version.
Allow storing LV status bits with segment type name field.
Switching to this since this field has better support for compatibility
with older version of lvm2 - since such unknown segtype will not cause
complete invisiblity of metadata from older lvm2 code - just the
particular LV will become unusable with unknown type of segment.
- Must reread all objects as PVs might be removed.
- Never consider testsuite provided PVs nested, or tearDown fails to
remove any outstanding VGs on them.
When 'fsadm' was running without terminal (i.e. pipe), it's been
automatically working like in '--yes'.
Detect terminal and only accept empty "" input in this mode.
Add more validation to catch mainly renamed devices, where
filesystem utils are not able to handle devices properly,
as they are not addressed by major:minor by rather via some
symbolic path names which can change over time via rename operation.
Since we add more validation to 'detect_mounted' function make sure
we always use it even with 'resize' action, so numerous validations
are not skipped.
Commit 5fe07d3574 failed to set raid5 types
properly on conversions from raid6. It always enforced raid6_ls_6
for types raid6/raid6_zr/raid6_nr/raid6_nc, thus requiring 3 conversions
instead of 2 when asking for raid5_{la,rs,ra,n}.
Related: rhbz1439403
Offer possible interim LV types and display their aliases
(e.g. raid5 and raid5_ls) for all conversions between
striped and any raid LVs in case user requests a type
not suitable to direct conversion.
E.g. running "lvconvert --type raid5 LV" on a striped
LV will replace raid5 aka raid5_ls (rotating parity)
with raid5_n (dedicated parity on last image).
User is asked to repeat the lvconvert command to get to the
requested LV type (raid5 aka raid5_ls in this example)
when such replacement occurs.
Resolves: rhbz1439403
Add an exception to not allowing lvchange to change properties
on hidden LVs. When a thin pool data LV is a cache LV, we
need to allow changing cache properties on the tdata sublv of
the thin pool.
Trap cases where the percentage calculation currently leads to an empty
LV and the message:
Internal error: Unable to create new logical volume with no extents
Additionally convert the calculated number of extents from physical to
logical when creating a mirror using a percentage that is based on
Physical Extents. Otherwise a command like 'lvcreate -m3 -l80%FREE'
can never leave any free space.
This brings the behaviour closer to that of lvresize.
(A further patch is needed to cover all the raid types.)
_check_reappeared_pv() incorrectly clears the MISSING_PV flags of
PVs with unknown devices.
While one caller avoids passing such PVs into the function, the other
doesn't. Move the check inside the function so it's not forgotten.
Without this patch, if the normal VG reading code tries to repair
inconsistent metadata while there is an unknown PV, it incorrectly
considers the missing PVs no longer to be missing and produces
incorrect 'pvs' output omitting the missing PV, for example.
Easy reproducer:
Create a VG with 3 PVs pv1, pv2, pv3.
Hide pv2.
Run vgreduce --removemissing.
Reinstate the hidden PV pv2 and at the same time hide a different PV
pv3.
Run 'pvs' - incorrect output.
Run 'pvs' again - correct output.
See https://bugzilla.redhat.com/1434054
There are certain situations (not fully understood)
where is_missing_pv() is false, but pv->dev is NULL,
so this adds a check for NULL pv->dev after is_missing_pv()
to avoid a segfault.
With recent updates for thin pool monitoring in version 169
we lost multiple WARNINGs to be printed in syslog, when
pool crossed 80%, 85%, 90%, 95%, 100%.
Restore this logic as we want to keep user informed more
then just once when 80% boundary is passed.
Fix a regression introduced in 70bb726 that allows a local variable
in the monitored file checking routine to be accessed before its
assignment when the file has already been unlinked.
When a user does a Manager.PvCreate they can specify the block device using a
device path that may be different than what lvm reports is the device path. For
example a user could use:
/dev/disk/by-id/wwn-0x5002538500000000 instead of /dev/sdc
In this case the pvcreate will succeed, but when we query lvm we don't find the
newly created PV. We fail because it's device path is returned as /dev/sdc. This
change re-uses an internal lookup which can accommodate this and correctly find
the newly created PV.
Corrects https://bugzilla.redhat.com/show_bug.cgi?id=1445654
There were a handful of references to other man
pages using the standard command(N) form which were
not in bold, so they were not turned into links
in html formats.
Many will look in 'man lvm.conf' expecting to find a
description of the lvm.conf fields, which are not there.
State at the beginning how to get this (by running
lvmconfig.)
The lvm(8) man page never said what LVM is,
it never defined what the acronym LVM stands for,
it never spelled out other common acronyms VG, PV, LV,
and never described what they are.
This adds a very minimal definition which at least defines
the acronyms and entities, but it could obviously be
expanded on, either here or elsewhere.
Clean up the handling of memory used for cmd defs
so it doesn't trip up memory debugging.
Allocate memory for commands[] from libmem.
Free temporary memory used by define_commands()
at the end of the function.
Clear all the command def state in in lvm_fin().
Using any arg with a command name in a script file
would cause the command to fail.
The name of the script file being executed was being passed
to lvm_register_commands() and define_commands(), which
prevented command defs from being defined (simple commands
were still being defined only by name which was enough for those
to still work when run trivially with no args).
The logic for suggesting the nearest valid command syntax
was missing the simplest case. If a command has only one
valid syntax, that is the one we should suggest. (We were
suggesting nothing in this case.)
If the device size does not match the size requested
by --setphysicalvolumesize, then prompt the user.
Make the pvcreate checking/prompting code handle
multiple prompts for the same device, since the
new prompt can be in addition to the existing
prompt when the PV is in a VG.
Adding qualifier makes the only unqualified log_debug occurence
consistent with other uses in the same file.
Other possible ways to fix this:
- using `from .utils import log_debug`
- moving the line below `from . import utils` line
Unless a change of the regionsize is requested via "lvconvert -R N ...",
keep the region size when the number of images changes in a raid1 LV.
Related: rhbz1443705
Unless a change of the regionsize is requested via "lvconvert -R N ...",
keep the region size when the number of images changes in a raid1 LV.
Resolves: rhbz1443705
lvconvert parameters not causing a conversion (i.e. no type,
number of stripes, stripesize or regionsize changes) will
remove any allocated reshape space in which case the command
returns success. If reshape space does not exist though,
return error.
When metadata LV size was over DM_THIN_MAX_METADATA_SIZE sectors,
the info() routine was incorrectly trying to match bigger size,
while we do never pass any bigger device.
Fixing a case, where lvs should be displaying status for metadata
LV with 16GB size.
When a cmd def RULE fails because of a disallowed
combination of options, improve the error message
to show the option combination, not just the options
that broke the rule.
Reshape check failed when regionsize changed and current raid type
was provided with no other change requested (stripes or stripesize).
E.g. "lvconvert --type raid6 --regionsize 256K" on a raid6 LV
with != 256K regionsize.
Enable --type in test script.
Remove any newly allocated sub LV (pair) remnants in case
allocation fails due to lag of (parallel) free PV space
and keep initial raid type.
Resolves: rhbz1438013
A command def can include a specific constant option value,
but the value was not being checked for optional opts.
e.g. this is an incorrect command and does not match any
command defs:
lvconvert --type cache --cachepool vg/lv
However, it was mistakely being matched to this cmd def,
where the required options match, but the optional options
do not:
lonvert --cachepool LV_linear_striped_raid_cachepool
OO: --type cache-pool, ...
The optional options were mistakely considered matching
because 'cache' and 'cache-pool' were not being compared.
SIGINT isn't blocked properly after a sigint_allow(),
sigint_restore() cycle leading to illicit interruptable
metadata updates. These can leave corrupted metadata behind.
Issues addressed in this commit:
sigint_allow() fails to set _oldmasked[] members properly due
to an offset by one bug on indexing the members of the array.
It bails out prematurely comparing to MAX_SIGINTS causing nesting
depths to be one less than MAX_SIGINTS. Fix the comparision.
Correct the related comparison flaw in sigint_restore().
Initialize all sig_atomic_t variables consequently.
Resolves: rhbz1440766
Avoid error message
"Logical Volume *_rimage_0 already exists in volume group,,,"
on takeover conversion from a 2-legged raid1 to raid4
(aiming to reshape it adding images).
Resolves: rhbz1439398
Requesting _raid_remove_images() to commit the
metadata missed to reload the origin causing a
kernel takeover error converting a 2-legged raid1
(with previously removed images) to raid5.
Allow the combination of both arguments keeping
the raid level but changing the regionssize
(e.g. "lvconvert --type raid1 --regionsize 1M RaidLV"
on an existing raid1 LV).
Resolves: rhbz1438396
lvchange/lvconvert operations that do not require the LV
to already be active need to acquire a transient LV lock
before changing/converting the LV to ensure the LV is not
active on another host. If the LV is already active,
a persistent LV lock already exists on the host and the
transient LV lock request is a no-op.
Some lvmlockd locks in lvchange were lost in the cmd def
changes. The lvmlockd locks in lvconvert seem to have
been missed from the start.
We have to unset the LoadState variable from previous use when we check
for systemd unit state. We use this variable to check if systemd services
are loaded or not and if it is loaded, we issue systemctl commands to
enable/disable and start/stop the service. We don't issue these commands
if the unit is not loaded to avoid error messages which may confuse users.
The actual value specified by the --poll y|n option was not
being used. The way the --poll value is used is hidden
through an indirection where the value is stored in a
global variable at the start of the command, and then the
value is read from there later. Setting the global
variable early in the command had been lost with the
cmd def changes.
Fill in some gaps where old versions of lvm allowed
--poll and --monitor in combination with other operations,
but those combinations had been lost since the cmd def work.
(The new cmd def code also added some combinations that
had been missed by the old code.)
Changes:
lvchange --activate: add poll and monitor options, and
add calls to them in implementation.
lvchange --refresh: add monitor option (poll already there),
and call to monitor in implementation.
lvchange <metadata ops>: add poll and monitor options, and
add calls to them in implementation.
vgchange <metadata ops>: add poll option (call to poll
already in implementation).
vgchange --refresh: remove monitor option (not used by code)
lvchange --persistent y: add poll and monitor options, and
add calls to them, and to activate
in the implementation. (Making it
match the main lvchange metadata
command.)
Summary of current usage:
lvchange --activate: monitor, poll
vgchange --activate: monitor, poll
lvchange --refresh: monitor, poll
vgchange --refresh: poll
lvchange --monitor: ok
lvchange --poll: ok
lvchange --monitor --poll: ok
vgchange --monitor: ok
vgchange --poll: ok
vgchange --monitor --poll: ok
lvchange <metadata ops>: monitor, poll
vgchange <metadata ops>: poll
Enhance commit 25b5915c9b
to process options requiring immediate metadata commits
and reloads after those we can group together doing just
one commit and an optional reload for the whole group.
Backup metadata after processing options successfully.
Related: rhbz1437611
Don't abbreviate the --help output quite as much
when there are many command defs. Print all the
options in the cmd defs that are shown. --longhelp
output is unchanged and includes everything.
These days --partial is only used with activation in
lvchange/vgchange. It probably had another meaning
at some point in history which is no longer used,
so ignore it in those cases.
When included in the OO list, the option is advertised in
help/man output, implying it is meaningful to the command,
when in fact the command never uses it.
The IO list means the option won't cause an error if it's
used, but is not displayed as an valid option for the command.
If the option is not included in either OO or IO lists,
using the option would cause a command error, which would cause
problems for anyone is using the option for historical reasons.
_lvchange_properties_single() processes multiple command
line arguments in a loop causing metadata updates and/or
backups per argument.
Optimize to only perform one update and/or backup
(but necessary interim ones; e.g. for --resync)
per command run.
Related: rhbz1437611
Use only selected paths for finding .so in builddir.
So if builddir constains some embeded subdirs with some more
occurences of project (i.e. 'make rpm' build subdir)
those library paths will not get into list.
With monolithic kernels we can't actually modprobe
for cache modules as they are already compiled-in
and policy modules do not export version symbol.
Reported issue on list:
https://www.redhat.com/archives/dm-devel/2017-March/msg00061.html
Fix will try to look for explicit kernel symbols first before
calling modprobe.
Fix a regression introduced by new command line processing
(see starting commit 1e2420bca8)
causing activation to be rejected in combination with setting
persistent minor device numbers.
Resolves: rhbz1437611
Since _filemap_monitor_set_notify() is only called after daemon
start up it should not use the _early_log() macros. Instead, use
log_sys_error to log errors from the two syscalls in the function.
The fallback branch in _stats_update_file() is redundant (since the
branch taken when the daemon starts successfully must jump to the
'out' label anyway): remove it and re-order the conditions to
improve readability.
Use log_sys_error rather than log_error if execvp() fails:
/mnt/redhat/xdoio.13752.XIORQ: Created new group with 2 region(s) as group ID 0.
# execvp() failed.
vs:
/var/lib/libvirt/images/rhel7-vm1.qcow2: Created new group with 884 region(s) as group ID 0.
dmfilemapd: execvp failed: No such file or directory
The function _filemap_monitor_check_file_unlinked() attempts to
test whether a fd value should be closed by comparison to zero:
if ((fd > 0) && close(fd))
log_error("Error closing fd %d", fd);
The test should be '>=' since 0 is a valid file descriptor.
Similar to 40fb91a, but for the file descriptor opened using the
link path reported by /proc/<self>/fd/<fd>.
The daemon opens a new file descriptor from /proc/<self>/fd when
checking for an unlinked file with mode=inode. Ensure that it is
always closed even if the same file test fails.
The daemon opens a new file descriptor from fm->path when checking
for an unlinked file with mode=inode. Ensure that it is always
closed even if the same file test fails.
The path argument check in dmfilemapd incorrectly tests for:
if (argv[0] == '/')
Rather than testing the 1st character in the string pointed to by
argv[0].
Removing some unused new lines and changing some incorrect "can't
release until this is fixed" comments. Rename license.txt to make
it clear its merely an included file, not itself a licence.
This patch fixed lvm2 compilation running on x32 arch.
(Using 64bit x86 cpu features but running on 32b address space,
so consuming less mem in VM).
On x32 arch 'time_t' is 64bit while 'long' is 32bit.
Commits a29bb6a14b
... 5c199d99f4
narrowed down on addressing the escaping of hyphens
in the dynamic creation of manuals whilst avoiding
them in creating help texts. This lead to a sequence
of slipping through hyphens adrressed by additional
patches in aforementioned commit series.
On the other hand, postprocessing dynamically man-generator
created and statically provided manuals catches all hyphens
in need of escaping.
Changes:
- revert the above commits whilst keeping man-generator
streamlining and the detection of any '\' when generating
help texts in order to avoid escapes to slip in
- Dynamically escape hyphens in manaual pages using sed(1)
in the respective Makefile targets
- remove any manually added escaping on hyphens from any
static manual sources or headers
raid1 doesn't allow to set all images to writemostly because at
least one image is required to receive any written data immediately.
The dm-raid target will detect such invalid request and
fail it iwith a kernel error message.
Reject such request in uspace displaying a respective error message.
The recent command definitions commit took the command
name from argv[0] without applying basename to the value,
so a pathname, e.g. /usr/sbin, would cause lvm to not
recognize the command name.
This commit supersedes reverted 1e4462dbfb
to avoid changes to liblvm and the libdm API completely.
The libdevmapper interface compares existing table line retrieved from
the kernel to new table line created to decide if it can suppress a reload.
Any difference between input and output of the table line is taken to be a
change thus causing a table reload.
The dm-raid target started to misorder the raid parameters (e.g. 'raid10_copies')
starting with dm-raid target version 1.9.0 up to (excluding) 1.11.0. This causes
runtime failures (limited to raid10 as of tests) and needs to be reversed to allow
e.g. old lvm2 uspace to run properly.
Check for the aforementioned version range in libdm and adjust creation of the table line
to the respective (mis)ordered sequence inside and correct order outside the range
(as described for the raid target in the kernels Documentation/device-mapper/dm-raid.txt).
This reverts commit 1e4462dbfb
in favour of an enhanced solution avoiding changes in liblvm
completetly by checking the target versions in libdm and emitting
the respective parameter lines.
Fixes command defs related to creating a new thin pool and
then a new thin lv in the new pool.
1. lvcreate --size --virtualsize --thinpool
Needs a cmd def, it was missing.
The def is unique by the three required
options: size, virtualsize and thinpool.
2. lvcreate --size --virtualsize --thinpool VG
Needs a cmd def, it was missing.
The def is unique by the three required
options: size, virtualsize and thinpool,
and one required positional arg: VG.
3. lvcreate --thin --virtualsize --size LV_new|VG
This existing def should not accept an optional
--type thin, which if used makes it indistinct
from another def.
4. lvcreate --size --virtualsize VG
This existing def should not accept an optional
--type thin or --thin, which if used makes it
indistinct from other defs (e.g. 3)
This reverts commit 642d682d8d.
Using the thinpool option with this cmd def makes it
indistinct from other cmd defs where thinpool is a
required option.
The libdevmapper interface compares existing table line retrieved from
the kernel to new table line created to decide if it can suppress a reload.
Any difference between input and output of the table line is taken to be a
change thus causing a table reload.
The dm-raid target started to misorder the raid parameters (e.g. 'raid10_copies')
starting with dm-raid target version 1.9.0 up to (excluding) 1.11.0. This causes
runtime failures (limited to raid10 as of tests) and needs to be reversed to allow
e.g. old lvm2 uspace to run properly.
Check for the aforementioned version range and adjust creation of the table line
to the respective (mis)ordered sequence inside and correct order outside the range
(as described for the raid target in the kernels Documentation/device-mapper/dm-raid.txt).
lvcreate --thinpool POOL1 -L 100M --virtualsize 100M snapper_thinp
https://bugzilla.redhat.com/1434027
(The general rule is that a command is accepted if it is unambiguous.
The combination -L -V --thinpool uniquely identifies the operation.)
Udev events can come in like a flood when something changes. It really
doesn't do us any good to refresh the state of the service numerous times
when 1 would suffice. We had something like this before, but it was
removed when we added the refresh thread. However, we have since learned
that we need to sequence events in the correct order and block dbus
operations if we believe the state has been affected, thus udev events are
being processed on the main work queue. This change limits spurious
work items from getting to the queue.
If we always disable the sending of notify dbus events then in the case
where all the users are lvm dbus users we will be in udev handling mode
until at least 1 external lvm command occurs. Instead we will not disable
notify dbus until after we get at least 1 external event. This makes the
service get into the correct mode of operation faster.
lvconvert should not leak 'error' device.
(This patch is not fix the problem, just makes it more easily visible
instead of more confusing 'clvmd' trace).
Starting with dm-raid target version 1.9.0 shrinking of mapped devices is supported.
Check for support being present in lvresize and lvreduce.
Related: rhbz1394048
Since we want to test different cache policies with profiles mq&smq
raise version to 1.8.
TODO: maybe split in more tests so older targets can test here as well.
N.B.: passthrough is also not supported with version 1.3
Quering non-thin-pool segment for discard property may lead
to intenal error if the segment had set 'out-of-range' value,
so only thin-pool is allowed, for other it returns NULL.
If SubLVs to be removed still exist after an image removing
conversion (i.e. "lvconvert --yes --force --stripes N "
with N < total stripes) any request to convert to a different
striped/raid* level has to be rejected until after those freed
SubLVs got removed by running the aforementioned lvconvert again.
Add tests to check conversion to striped/raid* gets rejected.
Enhance a test comment.
Related: rhbz1191935
Related: rhbz1366296
Adjust to final target version 1.10.1 supporting reshape
properly and to recently changed report field specifications
(e.g. rehape_len_le) to allow these tests to run.
Lower mirror region size to suite the tiny test VG.
Previous commit 506d88a2ec introduced disabling lvmetad on repairs.
Avoid calling lvscan and use of any --config options altogether
in the mirror and raid DSOs.
Related: rhbz1380521
Repairing missing devices does not work reliably
with lvmetad, so disable lvmetad before repair.
A standard lvmetad refresh (pvscan --cache) will
enable lvmetad again.
Commit 07ded8059c assumed that the mirror is blocked which is not the case.
It is accessible, degraded and in need of repair because some of its legs
(partially) failed. Any auto-repair via dmeventd fails though because
of lvmetad not providing proper data about the failed PV(s). That's why
this workaround got introduced in commit 76f6951c3e until we get to
the lvmetad interaction core issue.
Mind any mirror auto-repair failure is caused by such lvmetad interaction
problems not yet solved so disabling lvmetad works as a resort as elaborated
on in the related bz.
Reintroducing the interim solution.
Resolves: rhbz1380521
Effectively revert whole 76f6951c3e.
We need to figure out some other solution.
At this moment usage of --config with 'repair' of blocked mirror
is 'freezing' combination.
For each section 8 man page, a .8_gen file is created from one of:
.8_main - Old-style man page - content used directly
.8_des and .8_end - Description and end section of a generated page
.8_pregen - Pre-generated page used if the generator fails
Other man sections are not generated and use the suffix .5_main or .7_main.
Developers should use 'make generate' to regenerate the .8_pregen files.
When a given command:
- matches command definition A based on required options,
but uses optional options that are not accepted by A.
- matches command definition B based on required options,
(but fewer required items than A), and uses no
unaccepted optional options.
then B is the correct choice. Command A would fail because
of the unaccepted optional options. The logic was mistakenly
letting A win because it had a greater number of required option
matches, without accounting for the optional option mismatches.
Systematically outline every combination of:
--type striped, --type mirror, --type raid, --mirrors, --stripes
and make sure each is assigned to one specific cmd def.
This revealed that a new command def is needed for
lvcreate that uses both --mirrors and --stripes
but no --type option.
The use of LVCREATE_RAID shortcut for an option set
resulted in mirrors/stripes being included in optional
opts set when they were already in the required list.
Sending %d as format argument in lvmetad_vg_remove_pending() will cause
segfaults in config_make_nodes_v() when va_arg() casts to int64_t. Also, it is
clearly advertised in the lvm source code that using plain %d is prohibited, so
let's switch to FMTd64.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Require that the path argument to dmfilemapd be an absolute path
and document this in tool output, libdevmapper.h and dmfilemapd.8.
The check is also enforced by dm_stats_start_filemapd() to avoid
forking a new process with an invalid path argument.
The initial check on argc incorrectly returns 1 when the wrong
number of arguments are present, causing a segfault in main()
when no arguments are given:
# dmfilemapd
Wrong number of arguments.
usage: dmfilemapd <fd> <group_id> <path> <mode> [<foreground>[<log_level>]]
Segmentation fault (core dumped)
Commit f4b30b0dae was about displaying visible LV size
when reshape space is allocated. Take parity devices
into account when displaying the user visible LV size.
As was recently done with relative signes for sizes/extents,
limit the signs used with the mirrors option, e.g.
lvcreate --mirrors now does not accept or advertise an
optional minus sign with the value. lvconvert --mirrors
accepts +|-.
Add a warning about maximum supported numbers of stripes
with striped LVs realtive to RAID conversions.
Add examples for a more elaborate, multi-step conversion
from linear to striped (and vice versa).
Shrink lvs examples output.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
The LVCONVERT_RAID shortcut for including options ended
up including mirrors/stripes as optional opts in defs where
they were already required, or in defs where they would
not be used. Remove the option set and specify in each
case only the options wanted.
Better support for lvdisplay.
By default info about running (in kernel) cache status is printed.
To get 'segtype' info, user runs: 'lvdisplay -m', example:
--- Logical volume ---
LV Path /dev/vg/lvol0
LV Name lvol0
VG Name vg
LV UUID Y4uWuN-TBGk-duer-aPWl-yBWn-iFFR-RU1gg1
LV Write Access read/write
LV Creation host, time linux, 2017-03-01 20:52:39 +0100
LV Cache pool name lvol2
LV Cache origin name lvol0_corig
LV Status available
# open 0
LV Size 12,00 MiB
Cache used blocks 10,42%
Cache metadata blocks 0,49%
Cache dirty blocks 0,00%
Cache read hits/misses 112 / 34
Cache wrt hits/misses 133 / 0
Cache demotions 0
Cache promotions 20
Current LE 3
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:0
--- Segments ---
Logical extents 0 to 2:
Type cache
Chunk size 64,00 KiB
Metadata format 1
Mode writethrough
Policy smq
Setting migration_threshold=100000
OO_LVCREATE_CACHE accepts --cachemetadataformat.
Support new option --cachemetadataformat auto|1|2 for caching.
Word 'auto' can be also be given as '0'.
Report CMFmt column with cache metadata format version.
Report KMFmt column with 'kernel cache metadata format version' for device.
(a value reported from status).
(Update 'CacheMode' to name 'Cache' as primary segtype).
Only cache-pool segtype may store cache_metadata_format.
Only supported values are 0,1,2
Format 2 requires LV status uses LV_METADATA_FORMAT.
Format 0 (unselected) or 1 shall not set this 'incompatible' status.
Cache pool read/writes metadata_format within its segment type..
For CachePoolLV unselected metadata format is NOT stored in metadata.
For CacheLV when metadata format is not present/selected in lvm2 metadata,
it's automatically assumed to be the version 1 (backward compatible).
To ensure older lvm2 will not 'miss-read' metadata with new version 2,
such LV is marked with METADATA_FORMAT status flag (segment is
specifying metadata format). So when cache uses metadata format 2,
it will become inaccesible on older system without such support.
(kernel dm cache < 1.10, lvm2 < 2.02.169).
Add new profilable configation setting to let user select
which metadata format of a created cache pool he wish to use.
By default the 'best' available format is autodetected at runtime,
but user may enforce format 1 or 2 ATM.
Code also detects availability for metadata2 supporting cache target.
In case of troubles user may easily Disable usage of this feature
by placing 'metadata2' into global/cache_disabled_features list.
Older library version was not detecting unknown 'feature' bits
and could let start target without needed option.
New versioned symbol now checks for supported feature bits.
_Base version keeps accepting only previously known features and
mask/ignores unknown bits.
NB: if the older binary passed in 'random' bits, it will not get
metadata2 by chance. New linked binary get new validation function.
Library user is required to not pass 'trash' for unsupported bits,
as such calls will be rejected.
Dm cache target version 1.10 introduces new cache metadata format
(upstream kernel >=4.11).
New format is enable by passing new target feature flag metadata2.
Interace side on libdm uses DM_CACHE_FEATURE_METADATA2.
This feature bit is now also recognized on status
and set in 'feature_flags' field of dm_status_cache structure.
Code also adds check for 'highest' supported feature flag bit.
So it rejects properly any 'unknown' feature bit set by application.
Better code to enforce writethrough caching for cleaner policy.
Only check for cleaner when DM_CACHE_FEATURE_PASSTHROUGH or
DM_CACHE_FEATURE_WRITEBACK is set.
As now we can properly recognize all paramerters for pool creation,
we may drop PASS_ARG_ defines and rely on '_UNSELECTED' or 0 entries
as being those without user given args.
When setting are not given on command line - 'update' function
fill them from profiles or configuration. For this 'profile' arg
was needed to be passed around and since 'VG' itself is not needed,
it's been all replaced with 'cmd, profile, extents_size' args.
Reuse same code for getting/setting cache parameters with lvcreate.
So there is single one place how to get vars from profiles and configs.
Variables declarations are moved to start of function and
there is no need to initialize them as they are always
defined by functions get_cache_params() and get_pool_params().
Since cache chunk might be huge and there is no technical need
to enforce rounding and there is actually more 'real' VG space
used then necessary - keep rounding on 'chunk' bounrary only
for thin volumes - where it's the space used anyway.
NB: we support conversion of any-size 'existing' LV into cached LV.
Fix missing reset of '*settings' pointer when no args were given.
Handle cache_chunk settings like all other settings, so it is properly
updated only with non-zero settings and the existing cache-pool
chunk_size is not being reconfigured.
User can specify metadata profile which stores important cache
geometry data for easy configuration.
Fix missing support for getting chunk_size, cache_mode, cache_policy
for a cache/cache pools volumes from configuration or metadata profile.
Split-off patch that just replaces returns with 'goto bad'
so there is single place to release policy_settings.
In the next patch we will start to use some shared
function call between lvconvert and lvcreate
(effectively restoring previous logic which has got lost).
To more easily recognize unselected state from select '0' state
add new 'THIN_ZERO_UNSELECTED' enum.
Same applies to THIN_DISCARDS_UNSELECTED.
For those we no longer need to use PASS_ARG_ZERO or PASS_ARG_DISCARDS.
Basically code moving operation to have a single place resolving
thin_pool_chunk_size_policy.
Supported are generic & performance profiles.
Function is now shared between thin manipulation code and configuration
_CFG logic to obtain defaults and handle correct reporting upward coding
stack.
Test for NULL in dm_stats_destroy() and return immediately if
the struct dm_stats pointer is NULL (similar to free(NULL)).
This simplifies cleanup code which otherwise needs to:
out:
if (dms)
dm_stats_destroy(dms);
return;
Older compilers cannot tell that the 'mode' variable is only
used in branches in which it is assigned:
dmsetup.c:5651: warning: "mode" may be used uninitialized in this function
dmsetup.c:5023: warning: "mode" may be used uninitialized in this function
Avoid this by always assigning the variable a value.
Older compilers are not able to determine that although group_id
is only assigned in one branch of a conditional, it is never used
used when the other branch is taken:
libdm-stats.c:3319: warning: "group_id" may be used uninitialized in this function
Avoid this by always initialising the variable when it is
declared.
Utilizing the --config option we will utilize global/notify_dbus=0 so
that the service itself doesn't generate change events which it then needs to
process.
We need to place query operations in the queue to prevent the case where
a client knows of something before the service does. For example if a
client creates a PV/VG/LV outside of the dbus API and then immediately
tries to lookup and use that resource in the lvm dbus service it should
be present. By placing the queries in the work queue any previous
refresh operation will complete before we process the query.
In addition to the already supported conversion between 2-legged
raid1 and raid5, raid1 and raid4 can be also converted into each
other with 2 legs (raid4/5 are limited to map a 2-legged raid1).
This patch supports the missing raid4 conversion in the sequence
linear -> 2-legged raid1 -> raid4/5, then restripe to more than one
data stripes for performance and resilience reasons and optionally
convert to striped/raid0.
The other conversion sequence is also possible by converting N-way
striped/raid0 to raid4/5, then restripe to 2 legs followed by a
conversion to raid1 and optionally to linear (loosing all resilience).
Add examples for reshaping number of stripes
and converting from raid6 to striped to raid10.
Remove trailing spaces.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
The filemap daemon takes its program_id from the regions it is
managing: use DM_STATS_ALL_PROGRAMS when retrieving an initial
listing and then obtain the correct program_id from the group
leader.
On conversion from striped to raid0, data LVs are created
and all segments and their respective areas of the striped
LV are moved across to new segments allocated for the raid0
image LVs. This can cause non-canonical segments to be added
to the image LVs.
Add a call to lv_merge_segments() once all segments have been
added to an image LV to compensate for that. This avoids
unsafe table loads on activation.
Fix comments.
Automatic dmeventd repair of mirrors with active lvmetad configured
(mirror_image_fault_policy = "allocate") fails because the lvscan
run before the repair in the mirror DSO does not update the
lvmetad cache properly thus "lvconvert --repair ..." fails.
Need to scan the mirror LV before and after the repair
to have proper cache content after the repair finished.
The cache can't be relied on or the repair will fail.
Resolves: rhbz1380521
Launch an instance of the filemap monitoring daemon when creating,
or updating, a file mapped group, unless the --nomonitor switch is
given.
Unless --foreground is given the daemon will detach from the
terminal and run in the background until it is signaled or the
daemon termination conditions are met.
The --follow={inode|path} switch is added to control the daemon
behaviour when files are moved, unlinked, or renamed while they
are being monitored.
The daemon runs with the same verbosity as the dmstats command
that starts it.
Add a daemon that can be launched to monitor a group of regions
corresponding to the extents of a file, and to update the regions as the
file's allocation changes.
The daemon is intended to be started from a library interface, but can
also be run from the command line:
dmfilemapd <fd> <group_id> <path> <mode> [<foreground>[<log_level>]]
Where fd is a file descriptor open on the mapped file, group_id is the
group identifier of the mapped group and mode is either "inode" or
"path". E.g.:
# dmfilemapd 3 0 vm.img inode 1 3 3<vm.img
...
If foreground is non-zero, the daemon will not fork to run in the
background. If verbose is non-zero, libdm and daemon log messages will
be printed.
It is possible for the group identifier to change when regions are
re-mapped: this occurs when the group leader is deleted (regroup=1 in
dm_stats_update_regions_from_fd()), and another region is created before
the daemon has a chance to recreate the leader region.
The operation is inherently racey since there is currently no way to
atomically move or resize a dm_stats region while retaining its
region_id.
Detect this condition and update the group_id value stored in the
filemap monitor.
A function is also provided in the the stats API to launch the filemap
monitoring daemon:
int dm_stats_start_filemapd(int fd, uint64_t group_id, const char *path,
dm_filemapd_mode_t mode, unsigned foreground,
unsigned verbose);
This carries out the first fork and execs dmfilemapd with the arguments
specified.
A dm_filemapd_mode_t value is specified by the mode argument: either
DM_FILEMAPD_FOLLOW_INODE, or DM_FILEMAPD_FOLLOW_PATH. A helper function,
dm_filemapd_mode_from_string(), is provided to parse a string containing
a valid mode name into the appropriate dm_filemapd_mode_t value.
It's not an error to call dm_stats_group_present() on a handle
that contains no regions.
This causes dmfilemap to log a false backtrace during shutdown
if all regions are removed from the corresponding device:
exiting _filemap_monitor_get_events() with deleted=0, check=0
waiting for FILEMAPD_WAIT
dm message (253:1) [ opencount flush ] @stats_list dmstats [32768] (*1)
<backtrace>
Filemap group removed: exiting.
Change this to only emit a backtrace if the handle is NULL.
Splitting off an image LV of a 2-legged
raid1 LV causes loss of resilience.
Ask user to avoid uninformed loss of all resilience.
Don't ask for N > 2 legged raid1 LVs.
Adjust tests.
Splitting off an image LV of a 2-legged raid1 LV tracking changes
causes loosing partial resilience for any newly written data set.
Full resilience will be provided again after the split off image LV
got merged back in and the new data set got fully synchronized.
Reason being that the data is only stored on the remaining single
writable image during the split.
Ask user to avoid uninformed loss of such partial resilience.
Don't ask for N > 2 legged raid1 LVs.
In case N images fail (N <= parity chunks) _and_
a "vgreduce --removemissing --force VG" was applied
a following repair of the RaidLV fails:
Unable to remove N images: Only 0 devices given.
Failed to remove the specified images from tb/r.
Failed to replace faulty devices in tb/r.
Fix as of this commit results in correct repair:
Faulty devices in tb/r successfully replaced.
Add new values for different sign variations, resulting in:
size_VAL no sign accepted
ssize_VAL accepts + or -
psize_VAL accepts +
nsize_VAL accpets -
extents_VAL no sign accepted
sextents_VAL accepts + or -
pextents_VAL accepts +
nextents_VAL accepts -
Depending on the command being run, change the option
values for --size, --extents, --poolmetadatasize to
use the appropriate value from above.
lvcreate uses no sign (but accepts + and ignores it).
lvresize accepts +|- for a relative change.
lvextend accepts + for a relative change.
lvreduce accepts - for a relative change.
Like opt and val arrays in previous commit, combine duplicate
arrays for lv types and props in command.c and lvmcmdline.c.
Also move the command_names array to be defined in command.c
so it's consistent with the others.
command.c and lvmcmdline.c each had a full array defining
all options and values. This duplication was not removed
when the command.c code was merged into the run time.
seg->extents_copied has to be defined properly on reducing
the size of a raid LV or conversion from raid5 with 1 stripe
to raid1 will fail.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Reshaping a raid5 LV to one stripe aiming to convert it to
raid1 (and optionally to linear) reports the wrong LV size
when still having reshape space allocated.
The lv_extend/_lv_reduce API doesn't cope with resizing RaidLVs
with allocated reshape space and ongoing conversions. Prohibit
resizing during conversions and remove the reshape space before
processing resize. Add missing seg->data_copies initialisation.
Fix typo/comment.
For the time being raid10 is limited to even number of total stripes
as is and 2 data copies. The number of stripes provided on creation
of a raid10(_near) LV with -i/--stripes gets doubled to define
that even total number of stripes (i.e. images).
Apply the same on disk adding conversions (reshapes) with
"lvconvert --stripes RaidLV" (e.g. 2 stripes = 4 images
total converted to 3 stripes = 6 images total).
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Part of the UNIT description was still living in the
--size description. Move it to the Size[UNIT] description
since it is used by other options, not just --size.
In lvcreate/lvconvert, --poolmetdatasize can only be an
absolute value, but in lvresize/lvextend, --poolmetadatasize
can be given a + relative value.
The val types only currently support relative values that
go in both directions +|-. Further work is needed to add
val types that can be relative in only one direction, and
switching various option values to one those depending on
the command name. Then poolmetdatasize will not appear
with a +|- option in lvcreate/lvconvert, and will
appear with only the + option in lvresize/lvextend.
Enhance the raid report functions for the recently added LV fields
reshape_len, reshape_len_le, data_offset, new_data_offset, data_copies,
data_stripes and parity_chunks to cope with "lvs --select".
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Clean up and correct the details around --extents and --size.
lvcreate/lvresize/lvreduce/lvextend all now display the
extents option in usages.
The Size and Number value variables for --size and --extents
are now displayed without the [+|-] prefix for lvcreate.
A special case is needed to display
--extents for lvcreate since the cmd defs
treat --extents as an automatic alternative
to --size (to avoid duplicating every cmd def).
Now that we got the "data_stripes" field key, adjust the "stripes" field description.
Enhance the "regionsize" field description to cover raids as well.
When a cmd def includes multiple sets of options (OO_FOO),
allow multiple OO_FOO sets to contain the same option and
avoid repeating it in the cmd def.
There was confusion in the code about whether or not the
--size option accepted a sign. Make it consistent and clear
that it does.
This exposes a new problem in that an option can only
accept one value type, e.g. --size can only accept a
signed number, it cannot accept a positive or negative
number for some commands and reject negative numbers for
others.
In practice, lvcreate accepts only positive --size
values and lvresize accepts positive or negative --size
values. There is currently no way to encode this
difference. Until that is fixed, the man page output
is hacked to avoid printing the [+|-] prefix for sizes
in lvcreate.
Settings specified in other command line args take precedence over
profiles and --config, which takes precedence over settings in actual
config files.
Since commit 1e2420bca8 ('commands: new
method for defining commands') commands like this:
lvchange --config 'global/test=1' -ay vg
have been printing the 'TEST MODE' message, but nevertheless making
real changes.
Commit 48778bc503 introduced new RAID reshaping related report fields.
The inclusioon of segtype.h in properties.c isn't mandatory, remove it.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Commit 80a6de616a versioned the dm_tree_node_add_raid_target_with_params()
and dm_tree_node_add_raid_target() APIs for compatibility reasons.
There's no user of the latter function, remove it.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
During an ongoing reshape, the MD kernel runtime reads stripes relative
to data_offset and starts storing the reshaped stripes (with new raid
layout and/or new stripesize and/or new number of stripes) relative
to new_data_offset. This is to avoid writing over any data in place
which is non-atomic by nature and thus be recoverable without data loss
in the transition. MD uses the term out-of-place reshaping for it.
There's 2 other areas we don't have report capability for:
- number of data stripes vs. total stripes
(e.g. raid6 with 7 stripes toal has 5 data stripes)
- number of (rotating) parity/syndrome chunks
(e.g. raid6 with 7 stripes toal has 2 parity chunks; one
per stripe for P-Syndrome and another one for Q-Syndrome)
Thus, add the following reportable keys:
- reshape_len (in current units)
- reshape_len_le (in logical extents)
- data_offset (in sectors)
- new_data_offset ( " )
- data_stripes
- parity_chunks
Enhance lvchange-raid.sh, lvconvert-raid-reshape-linear_to_striped.sh,
lvconvert-raid-reshape-striped_to_linear.sh, lvconvert-raid-reshape.sh
and lvconvert-raid-takeover.sh to make use of new keys.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Add/remove the SECONDARY_SYNTAX flag to cmd defs.
cmd defs with this flag will be listed under the
ADVANCED USAGE man page section, so that the main
USAGE section contains the most common commands
without distraction.
- When multiple cmd defs do the same thing, one variant
can be displayed in the first list.
- Very advanced, unusual or uncommon commands should be
in the second list.
Recently added check for reshaping in this function called for
a cleanup to avoid proliferating it with more explicit conditionals.
Base the reshaping check on the given _features array.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
An initialization was missing when converting striped to raid0(_meta)
causing unitialized reshape_len in the new component LVs first segment.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
The imposed minimum region size can cause rejection on
disk removing reshapes. Lower it to avoid that.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Commit 27384c52cf lowered the maximum number of devices
back to 64 for compatibility.
Because more members have been added to the API in
'struct dm_tree_node_raid_params *', we have to version
the public libdm RAID API to not break any existing users.
Changes:
- keep the previous 'struct dm_tree_node_raid_params' and
dm_tree_node_add_raid_target_with_params()/dm_tree_node_add_raid_target()
in order to expose the already released public RAID API
- introduce 'struct dm_tree_node_raid_params_v2' and additional functions
dm_tree_node_add_raid_target_with_params_v2()/dm_tree_node_add_raid_target_v2()
to be used by the new lvm2 lib reshape extentions
With this new API, the bitfields for rebuild/writemostly legs in
'struct dm_tree_node_raid_params_v2' can be raised to 256 bits
again (253 legs maximum supported in MD kernel).
Mind that we can limit the maximum usable number via the
DEFAULT_RAID{1}_MAX_IMAGES definition in defaults.h.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
- Combine the equivalent lvconvert --type raid defs.
(Two cmd defs must be different without relying
on LV type, which are not known at the time the
cmd def is matched.)
- Remove unused optional options from lvconvert --stripes,
and lvconvert --stripesize.
- Use Number for --stripes_long val type.
- Combine the cmd def for raid reshape cleanup into the
existing start_poll cmd def (they were duplicate defs).
Calls into the raid code from a poll opertion will be
added.
Commit 64a2fad5d6 raised the maximum number of RAID devices to 64.
Commit e2354ea344 introduced RAID_BITMAP_SIZE as 4 to have
256 bits (4 * 64 bit array members), thus changing the libdm API
unnecessarilly for the time being.
To not change the API, reduce RAID_BITMAP_SIZE to 1.
Remove an unneeded definition of it from libdm-common.h.
If we ever decide to raise past 64, we'll version the API.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
The fedorahosted git repository shuts down tomorrow:
https://communityblog.fedoraproject.org/fedorahosted-sunset-2017-02-28/
Our upstream git repository has moved back to sourceware.org.
Mailing list hosting is not changing.
Gitweb:
https://www.sourceware.org/git/?p=lvm2
Git:
git://sourceware.org/git/lvm2.git
ssh://sourceware.org/git/lvm2.git
http://sourceware.org/git/lvm2.git
Example command to change the origin of a repository clone:
Public:
git remote set-url origin git://sourceware.org/git/lvm2.git
Committers:
git remote set-url origin git+ssh://sourceware.org/git/lvm2.git
The options list was sorted as:
- options with both long and short forms, alphabetically
- options with only long form, alphabetically
This was done only for the visual effect. Change to
sort alphabetically by long opt, without regard to
short forms.
Fixes commit 286d39ee3c, which was correct except
for a reversed strstr. Now uses strchr, and modifies
a copy of the name so the original argv is preserved.
When requesting a regionsize change during conversions, check
for constraints or the command may fail in the kernel n case
the region size is too smalle or too large thus leaving any
new SubLVs behind.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Allow regionsize on upconvert from linear:
fix related commit 2574d3257a to actually work
Related: rhbz1394427
Remove setting raid5_n on conversions from raid1
as of commit 932db3db53 because any raid5 mapping
may be requested.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Add aforementioned but forgotten new test scripts
lvconvert-raid-reshape-linear_to_striped.sh,
lvconvert-raid-reshape-striped_to_linear.sh and
lvconvert-raid-reshape.sh
Those presume dm-raid target version 1.10.2
provided by a following kernel patch.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Because of contraints in renaming shifted rimage/rmeta LV names
the current RaidLV limit is a maximum of 10 SubLV pairs.
With the previous introduction of reshaping infratructure that
constriant got removed.
Kernel supports 253 since dm-raid target 1.9.0, older kernels 64.
Raise the maximum number of RaidLV rimage/rmeta pairs to 64.
If we want to raise past 64, we have to introdce a check for
the kernel supporting it in lvcreate/lvconvert.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces the changes to call the reshaping infratructure
from lv_raid_convert().
Changes:
- add reshaping calls from lv_raid_convert()
- add command definitons for reshaping to tools/command-lines.in
- fix raid_rimage_extents()
- add 2 new test scripts lvconvert-raid-reshape-linear_to_striped.sh
and lvconvert-raid-reshape-striped_to_linear.sh to test
the linear <-> striped multi-step conversions
- add lvconvert-raid-reshape.sh reshaping tests
- enhance lvconvert-raid-takeover.sh with new raid10 tests
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Change:
- allow raid_rimage_extents() to calculate raid10
- remove an __unused__ attribute
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Change:
- add missing raid1 <-> raid5 conversions to support
linear <-> raid5 <-> raid0(_meta)/striped conversions
- rename related new takeover functions to
_takeover_from_raid1_to_raid5 and _takeover_from_raid5_to_raid1,
because a reshape to > 2 legs is only possible with
raid5 layout
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Change:
- enhance _clear_meta_lvs() to support raid0 allowing
raid0_meta -> raid10 conversions to succeed by clearing
the raid0 rmeta images or the kernel will fail because
of discovering reordered raid devices
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Changes:
- enhance _raid45610_to_raid0_or_striped_wrapper() to support
raid5_n with 2 areas to raid1 conversion to allow for
striped/raid0(_meta)/raid4/5/6 -> raid1/linear conversions;
rename it to _takeover_downconvert_wrapper to discontinue the
illegible function name
- enhance _striped_or_raid0_to_raid45610_wrapper() to support
raid1 with 2 areas to raid5* conversions to allow for
linear/raid1 -> striped/raid0(_meta)/raid4/5/6 conversions;
rename it to _takeover_upconvert_wrapper for the same reason
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Changes:
- add missing possible reshape conversions and conversion options
to allow/prohibit changing stripesize or number fo stripes
- enhance setting convenient riad types in reshape conversions
(e.g. raid1 with 2 legs -> radi5_n)
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Changes:
- add _raid_reshape() using the pre/post callbacks and
the stripes add/remove reshape functions introduced before
- and _reshape_requested function checking if a reshape
was requested
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Changes:
- add vg metadata update functions
- add pre and post activation callback functions for
proper sequencing of sub lv activations during reshaping
- move and enhance _lv_update_reload_fns_reset_eliminate_lvs()
to support pre and post activation callbacks
- add _reset_flags_passed_to_kernel() which resets anyxi
rebuild/reshape flags after they have been passed into the kernel
and sets the SubLV remove after reshape flags on legs to be removed
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Changes:
- add function to support disk adding reshapes
- add function to support disk removing reshapes
- add function to support layout (e.g. raid5ls -> raid5_rs)
or stripesize reshaping
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Changes:
- add function providing state of a reshaped RaidLV
- add function to adjust the size of a RaidLV was
reshaped to add/remove stripes
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Changes:
- add lv_raid_data_copies returning raid type specific number;
needed for raid10 with more than 2 data copies
- remove _shift_and_rename_image_components() constraint
to support more than 10 raid legs
- add function to calculate total rimage length used by out-of-place
reshape space allocation
- add out-of-place reshape space alloc/relocate/free functions
- move _data_rimages_count() used by reshape space alloc/realocate functions
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces local infrastructure to raid_manip.c
used by followup patches.
Add functions:
- to check reshaping is supported in target attibute
- to return device health string needed to check
the raid device is ready to reshape
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces infrastructure prerequisites to be used
by raid_manip.c extensions in followup patches.
This base is needed for allocation of out-of-place
reshape space required by the MD raid personalities to
avoid writing over data in-place when reading off the
current RAID layout or number of legs and writing out
the new layout or to a different number of legs
(i.e. restripe)
Changes:
- add members reshape_len to 'struct lv_segment' to store
out-of-place reshape length per component rimage
- add member data_copies to struct lv_segment
to support more than 2 raid10 data copies
- make alloc_lv_segment() aware of both reshape_len and data_copies
- adjust all alloc_lv_segment() callers to the new API
- add functions to retrieve the current data offset (needed for
out-of-place reshaping space allocation) and the devices count
from the kernel
- make libdm deptree code aware of reshape_len
- add LV flags for disk add/remove reshaping
- support import/export of the new 'struct lv_segment' members
- enhance lv_extend/_lv_reduce to cope with reshape_len
- add seg_is_*/segtype_is_* macros related to reshaping
- add target version check for reshaping
- grow rebuilds/writemostly bitmaps to 246 bit to support kernel maximal
- enhance libdm deptree code to support data_offset (out-of-place reshaping)
and delta_disk (legs add/remove reshaping) target arguments
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
(Change to recent commit 3f4ecaf8c2.)
Use --foo Number[k|UNIT] to indicate that
the default units of the number is k, but other
units listed below are also accepted.
Previously, underlined/italic Unit was used,
like other of variables, but this UNIT is more
like a shortcut than an actual variable.
The MD kernel raid1 personality does no use any writemostly leg as the primary.
In case a previous linear LV holding data gets upconverted to
raid1 it becomes the primary leg of the new raid1 LV and a full
resynchronization is started to update the new legs.
No writemostly and/or writebehind setting may be allowed during
this initial, full synchronization period of this new raid1 LV
(using the lvchange(8) command), because that would change the
primary (i.e the previous linear LV) thus causing data loss.
lvchange has a bug not preventing this scenario.
Fix rejects setting writemostly and/or writebehind on resychronizing raid1 LVs.
Once we have status in the lvm2 metadata about the linear -> raid upconversion,
we may relax this constraint for other types of resynchronization
(e.g. for user requested "lvchange --resync ").
New lvchange-raid1-writemostly.sh test is added to the test suite.
Resolves: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=855895
We use --foo Number[k|Units] to indicate that
the default units of the number is k, but other
units listed below are also accepted.
Capitalize and underline Units so it is consistent
with other variables, and reference it at the end.
Technically, the k should be bold, but this
tends to make the text visually hard to read
because of the excessive highlights scattered
everywhere. So it's left normal text for now
(it's unlikely to confuse anyone.)
Print ... after a repeatable option in the OPTIONS section.
An alternative would be to just mention in the text description
that the option is repeatable.
When the test would need to try to write some large amount of data
we can give it 'zero' segments - for obvious reason such written data
can't be verified but in some test cases it doesn't really matter.
Usage follows 'error_dev' style.
For now test suite is not supporting any combination of
error/delay/zero segments so only 1 type could be used per PV.
Previously when lvremove tried to remove 'active' origin,
it had been asking for every 'snapshot' LV separately
and doing individual single snapshot removals first.
To be faster it now deactivates origin before removal
all connected snapshots.
This avoids multiple reloads of dm table for origin volume
which were unnecessary as origin was meant to be removed as well.
There are two kinds of common options:
1. options common to all variants of a given command name
2. options common to all lvm commands
Previously, both kinds of common options were listed together
under "Common options". Now the first are printed under
"Common options for command" (when needed), and the second
are printed under "Common options for lvm" (always).
Remove the "usage notes" which should just
live in the man pages.
When there are 3 or more variants of a command,
print all the options produces a lot of output,
so require --longhelp to print all the options
in these cases.
Check 'dmsetup version' is called before starting any more
advanced logic in $DM_DEV_DIR.
Call also replaces mkdir as it creates needed path with control node.
The --type option has previously been accepted for
lvresize/lvextend. Using it did not affect the operation
of the command. The value was simply verified as matching
the current seg type of the LV.
Commit f45b689406 caused regression
of lvresize -m and --type parameter
After fix this sequence may work when we also fix syntax description:
lvcreate -l1 -m1 -n lv1 vg
lvextend --type mirror -m1 -l+1 vg/lv1
For this syntax:
lvconvert --thinpool LV1 --poolmetadata LV2
lvconvert --cachepool LV1 --poolmetadata LV2
Restore the metadata swapping behavior in addition to
the pool creation behavior. When LV1 is already a pool,
the metadata LV will be swapped with LV2.
When LV1 is not a pool, it will be converted to a
pool using the specified LV for metadata.
This syntax is no longer advertised because of the
ambiguous behavior. The primary syntaxes for pool
creation and metadata swapping will be the advertised
methods.
As we now user binary search - it's nondeterministict
which of the same 'args' will be give - so duplicates
need 'extra' care.
So provide same hack for output for --uuidstr_ARG as
for input.
Solves 'pvscan -u'.
Since there is a lot of options and lot of searches,
use binary search to keep strcmp at minimum.
The interesting part is - alphabetically sorted array contains
duplicates and some of them are not the 'right anwer', so
after we find matching string but not matching long_ARG,
we may need to check if the surrouding strings are the right matching
one.
The single loops is used also for strictly define --foo_long
(i.e. --stripes) and just differs at final part.
TODO1: replace strstr call with some flag (just like short_opt).
TODO2: drop '--' from being stored and tests by strcmp.
When parsing command defs, track and report all
errors that are found. Add an error return case
from define_commands so the standard error exit
path is used.
When using liblvm2cmd, a process can do multiple
init/exit calls, i.e.
lvm2_init(); lvm2_run(); lvm2_exit();
lvm2_init(); lvm2_run(); lvm2_exit();
...
define_commands() needs to set up the global commands[]
definitions only the first time.
The old ad hoc arg parsing when combining a split snapshot
allowed the first lv to have a vgname, but not the second.
Since lvconvert now uses the standard arg parsing in
process_each_lv(), the old one-off behavior requires a
work around.
This reverts commit 717363bb94.
These alternate forms for swapping metadata cannot be
distinguished from the command for creating a pool.
If we were to add these alternate forms for swapping
metadata, we would need to overload the pool creation
command defs, making those definitions ambiguous.
Change run time access to the command_name struct
cmd->cname instead of indirectly through
cmd->command->cname. This removes the two run time
fields from struct command.
All lvconvert functionality has been moved out of the
previous monolithic lvconvert code, except conversions
related to raid/mirror/striped/linear. This switches
that remaining code to be based on command defs, and
standard process_each_lv arg processing. This final
switch results in quite a bit of dead code that is
also removed.
This is a new explicit version of 'lvconvert LV'
which has been an obscure way of triggering polling
to be restarted on an LV that was previously converted.
Lift all the snapshot utilities (merge, split, combine)
out of the monolithic lvconvert implementation, using
the command definitions. The old code associated with
these commands is now unused and will be removed separately.
This lifts the lvconvert --repair and --replace commands
out of the monolithic lvconvert implementation. The
previous calls into repair/replace can no longer be
reached and will be removed in a separate commit.
The new check_single_lv() function is called prior to the
existing process_single_lv(). If the check function returns 0,
the LV will not be processed.
The check_single_lv function is meant to be a standard method
to validate the combination of specific command + specific LV,
and decide if the combination is allowed. The check_single
function can be used by anything that calls process_each_lv.
As commands are migrated to take advantage of command
definitions, each command definition gets its own entry
point which calls process_each for itself, passing a
pair of check_single/process_single functions which can
be specific to the narrowly defined command def.
. Define a prototype for every lvm command.
. Match every user command with one definition.
. Generate help text and man pages from them.
The new file command-lines.in defines a prototype for every
unique lvm command. A unique lvm command is a unique
combination of: command name + required option args +
required positional args. Each of these prototypes also
includes the optional option args and optional positional
args that the command will accept, a description, and a
unique string ID for the definition. Any valid command
will match one of the prototypes.
Here's an example of the lvresize command definitions from
command-lines.in, there are three unique lvresize commands:
lvresize --size SizeMB LV
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync, --reportformat String, --resizefs,
--stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB
OP: PV ...
ID: lvresize_by_size
DESC: Resize an LV by a specified size.
lvresize LV PV ...
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync,
--reportformat String, --resizefs, --stripes Number, --stripesize SizeKB
ID: lvresize_by_pv
DESC: Resize an LV by specified PV extents.
FLAGS: SECONDARY_SYNTAX
lvresize --poolmetadatasize SizeMB LV_thinpool
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync,
--reportformat String, --stripes Number, --stripesize SizeKB
OP: PV ...
ID: lvresize_pool_metadata_by_size
DESC: Resize a pool metadata SubLV by a specified size.
The three commands have separate definitions because they have
different required parameters. Required parameters are specified
on the first line of the definition. Optional options are
listed after OO, and optional positional args are listed after OP.
This data is used to generate corresponding command definition
structures for lvm in command-lines.h. usage/help output is also
auto generated, so it is always in sync with the definitions.
Every user-entered command is compared against the set of
command structures, and matched with one. An error is
reported if an entered command does not have the required
parameters for any definition. The closest match is printed
as a suggestion, and running lvresize --help will display
the usage for each possible lvresize command.
The prototype syntax used for help/man output includes
required --option and positional args on the first line,
and optional --option and positional args enclosed in [ ]
on subsequent lines.
command_name <required_opt_args> <required_pos_args>
[ <optional_opt_args> ]
[ <optional_pos_args> ]
Command definitions that are not to be advertised/suggested
have the flag SECONDARY_SYNTAX. These commands will not be
printed in the normal help output.
Man page prototypes are also generated from the same original
command definitions, and are always in sync with the code
and help text.
Very early in command execution, a matching command definition
is found. lvm then knows the operation being done, and that
the provided args conform to the definition. This will allow
lots of ad hoc checking/validation to be removed throughout
the code.
Each command definition can also be routed to a specific
function to implement it. The function is associated with
an enum value for the command definition (generated from
the ID string.) These per-command-definition implementation
functions have not yet been created, so all commands
currently fall back to the existing per-command-name
implementation functions.
Using per-command-definition functions will allow lots of
code to be removed which tries to figure out what the
command is meant to do. This is currently based on ad hoc
and complicated option analysis. When using the new
functions, what the command is doing is already known
from the associated command definition.
Some archs can use even 64K pages and then lvm2 runs into trouble if
the stack is 'too small' to fit extra page capturing stack overwrite.
So when lvm2 limits stack - add extra mem page - be it 4K or 64K.
Relates to ppc64le bug: https://bugzilla.redhat.com/1387279
Remove allocate_pvs from raid_manip.c:_region_size_change_request() API
and lv_extend() using it added for temporary test purpose.
Related: rhbz1366296
Add:
- region size checks to raid_manip.c types array and supporting functions
- tests to lvconvert-raid-takeover.sh to check bogus
"lvconvert --type --regionsize N " requests
Related: rhbz1366296
When we preload device with smaller size, we avoid its resume,
so later suspend/resume of full device tree my process all
existing in flight bios.
Also update comment and avoid using confusing opposite meaning.
Kernel 4.10 (dm-crypt v1.15.0) and later supports loading device
tables with crypt segment having key in kernel keyring retention
service.
dmsetup hid key section of tables output. With this patch dmsetup
no longer hides key section if it detects kernel key description
instead of hex byte representation of key itself.
Add:
- conversion support from striped/raid0/raid0_meta to/from raid10;
raid10 goes by the near format (same as used in creation of
raid10 LVs), which groups data copies together with their original
blocks (e.g. 3-way striped, 2 data copies resulting in 112233 in the
first stripe followed by 445566 in the second etc.) and is limited
to even numbers of legs for now
- related tests to lvconvert-raid-takeover.sh
- typo
Related: rhbz1366296
- support shrinking of raid0/1/4/5/6/10 LVs
- enhance lvresize-raid.sh tests: add raid0* and raid10
- fix have_raid4 in aux.sh to allow lv_resize-raid.sh
and other scripts to test raid4
Resolves: rhbz1394048
Commit cfb6ef654d introduced
support to change RAID region size.
Fix:
- don't change region_size until after prompting the user
- use log_print_unless_silent() instead of log_warn()
- avoid superfluous sigint() calls which are already
covered in yes_no_prompt()
- typo
Related: rhbz1392947
Commit cfb6ef654d introduced
support to change RAID region size.
Add:
- missing conditions to support any types to function with
it in lv_raid_convert(); temporary workaround used until
cli validation patches get merged
- tests requesting "-R " to lvconvert-raid-takeover.sh
involving a cleanup of the script
Related: rhbz1392947
Cleanups as of Jons review:
- enhance comment about mandatory raid4 <-> raid5_n activation w/o metadata SubLVs
- remove bogus segment flag setting
- fix to sync related comments on conversions to raid0/striped and amongst raid4/5
- add missing error message for non-synced conversion to raid0/striped
Related: rhbz1366296
Add:
- support to change region size of existing RaidLVs
(all RAID LV types but raid0/raid0_meta)
- lvconvert-raid-regionsize.sh with test variations
for different RAID types and region sizes
Resolves: rhbz1392947
Well waiting for zeroing may take enough time to finish 'raid' sync.
So make the test running faster without zeroing and better avoid race
to have chance to happen (i.e. lvcreate is finished after array
gets already in sync).
Add:
- support for segment types raid6_{ls,rs,la,ra}_6
(striped raid with dedicated last Q-Syndrome SubLVs)
- conversion support from raid5_{ls,rs,la,ra} to/from raid6_{ls,rs,la,ra}_6
- setting convenient segtypes on conversions from/to raid4/5/6
- related tests to lvconvert-raid-takeover.sh factoring
out _lvcreate,_lvconvert funxtions
Related: rhbz1366296
Add:
- support for segment type raid6_n_6 (striped raid with dedicated last parity/Q-Syndrome SubLVs)
- conversion support from striped/raid0/raid0_meta/raid4 to/from raid6_n_6
- related tests to lvconvert-raid-takeover.sh
Related: rhbz1366296
Add:
- support for segment type raid5_n (striped raid with dedicated last parity SubLVs)
- conversion support from striped/raid0/raid0_meta/raid4 to/from raid5_n
- related tests to lvconvert-raid-takeover.sh
Related: rhbz1366296
Add a new update_filemap command to dmstats that allows a filemap
group to be updated:
# dmstats update_filemap --groupid 0 vm.img
/var/lib/libvirt/images/vm.img: Updated group ID 0 with 137 region(s).
This will update the set of regions mapped to the file to reflect
the current file system allocation.
Currently this needs to be run manually - a future update will add
support for monitoring file maps via a daemon, allowing them to be
automatically updated when the underlying file is modified.
Add a call to update the regions corresponding to a file mapped
group of regions. The regions to be updated must be grouped, to
allow us to correctly identify extents that have been deallocated
since the map was created.
Tables are built of the file extents, and the extents currently
mapped to dmstats regions: if a region no longer has a matching
file extent, it is deleted, and new regions are created for any
file extents without a matching region.
The FIEMAP call returns extents that are currently in-memory (or
journaled) and awaiting allocation in the file system. These have
the FIEMAP_EXTENT_UNKNOWN | FIEMAP_EXTENT_DELALLOC flag bits set
in the fe_flags field - these extents are skipped until they
have a known disk location.
Since it is possile for the 0th extent of the file to have been
deallocated this must also handle the possible deletion and
re-creation of the group leader: if no other region allocation
is taking place the group identifier will not change.
If the group_id passed to _stats_group_id_present is equal to the
special value DM_STATS_GROUP_NOT_PRESENT there is no need to perform
any further tests: return false immediately.
For more advanced support we need to ensure better logic for calling
external much more advanced script for maintanance of thin-pool.
So this new code ensures:
When thin-pool data or metadata is bigger then 50%,
then with each 5% increment, action is called.
This is independent from autoextend_threshold.
This action always happens when thin-pool is over threshold,
(so no action when it's exactly i.e. 60%).
The only exception is 100% full thin-pool - which invokes 'last'
action.
Since thin-pool occupancy may change also downward, code needs
to also handle possibly reduction of occupancy of thin-pool.
So when usage drop from 90% to 50%, thin-pool will start to call
again action when it will pass 55% threshold.
This give external commands lot of option i.e. to call 'fstrim'
before actual resize is needed.
Default internal logic will stop trying to do any 'rescue' action
when executed command fails.
This will be now fully in hands of external script if such
behaviour is needed.
Instead of stopping monitoring after couple failing retries,
keep monitoring forever, just make larger delays between command
retries (ATM upto ~42 minutes).
So syslog is not spammed too often, yet commands have a chance to
be retried and succeed eventually...
When dmeventd configured command does not start with 'lvm ' prefix,
it's going to be an 'external' command.
In this case we split command by spaces to argv strings.
When showing sizes with 'H|human' units we do use standard rounding.
This however is confusing users from time to time,
when the printed number uses some biger units i.e. GiB and there is just
tiny fraction of space missing.
So here is some real-life example with new 'r' unit.
$lvs
LV VG Attr LSize Pool Origin
lvol0 vg -wi-a----- 1.99g
lvol1 vg -wi-a----- <2.00g
lvol2 vg -wi-a----- <2.01g
Meaning is - lvol1 has 'slightly' less then 2.00g - from sign '<' user
can be aware the LV doesn't have full 2.00GiB in size so he
will be less surpriced allocation of 2G volume will not succeed.
$ vgs
VG #PV #LV #SN Attr VSize VFree
vg 2 2 0 wz--n- <6,00g <2,01g
For uses needing 'old' undecorated human unit simply will continue
to use 'H|h' units.
The new R|r may further change when we would recongnize some
other way how to improve readability.
With recent commit d6a74025df using
INTERNAL_ERROR while cheking layer LV - it's been noticed mirror
logic currently doesn't do a correct thing during upconversion and
does a full-try instead of checking only allocator capabilities.
This leads to invalid usage of layer.
To keep existing code running before providing a fix, relax
INTERNAL_ERROR just an error and keep the 'code' running.
Once mirror code is fixed, these all check should be switched
to internal errors.
Since we still experience occasiaonal test failure - slow
things down even more to avoid race.
Add support for 'quick' table changes between normal & delayed tables.
This was missing piece in 77997c7673.
When merging origin is inactive (while driver is loaded) we
could already report merge in progress values as there is
no way to activate 'old state' now.
Show proper internal error for failing command when there are some
inconsitencies in sizes of LV and its layer instead of rather
meaningless error code 5.
(Could be hit i.e. if user tried to 'resize' cached LV and then
uncache such LV.)
During rework of resize code this validation check
has been lost (in my resize branch). Upstream
is still not supporting resize of any cache type LV
so needs to be prevented.
When we need to clear dirty cache content of cached LV, there
is table reload which usually is shortly followed by next metadata
change. However udev can't (as of now) process udev event
while device is 'suspended'.
So whenever sequence of 'suspend/resume/suspend' is needed,
we need to wait first for finishing of 'resume' processing before
starting next 'suspend'. Otherwise there is 'race' danger of triggering
unwantend umount by systemd as such event will trigger
SYSTEMD_READY=0 state for a moment for such changed device.
Such race is pretty ugly to trace so we may need to review more
sequencies for missing 'sync'.
(Other option is to enhnace 'udev' rules processing to avoid
such dramatic actions to be happening for suspended devices).
Solves: https://bugzilla.redhat.com/1280496
The only reasonable behaviour here is to error on
any number out of accepted range (i.e. now numbers
wrapping around with some hidden logic).
As this is plain bug there is no support for
backward compatibility since noone should
set numbers >UINT32_MAX and expect 0 or error
depending on how big number was used....
TODO: more fields might need to be converted.
Add simple function to wrap usage for only uint32 numbers.
Unlike 'int_arg' which accepts full range of 64bit number
this function will error on numbers out of this range:
<0, UINT32_MAX>
Add to commits 87117c2b25 and 0b8bf73a63 to avoid refreshing two
times altogether, thus avoiding issues related to clustered, remotely
activated RaidLV. Avoid need to repeat "lvchange --refresh RaidLV"
two times as a workaround to refresh a RaidLV. Fix handles removal
of temporary *-missing-* devices created for any missing segments
in RAID SubLVs during activation.
Because the kernel dm-raid target isn't able to handle transiently
failing devices properly we need
"[dm-devel][PATCH] dm raid: fix transient device failure processing"
as well.
test: add lvchange-raid-transient-failures.sh
and enhance lvconvert-raid.sh
Resolves: rhbz1025322
Related: rhbz1265191
Related: rhbz1399844
Related: rhbz1404425
When thin-pool processes event and 'lvextend --use-policies' fails
rather capture up-to-date new info as the fullness percentage may
have jumped noticable. This way we could use 'more' correct numbers
when checking for thresholds.
When there is 'merging' of an origin in progress, but metadata stil
do provide both origin and snapshot, we should show data from merged
snapshot. This is important mainly for thin case, where there was
a window, where i.e. 'lvs -o+device_id' would report information
about 'already gone' origin thin LV.
This race window is usually hard to trigger but can be ocasionally hit.
Usually shortly after activation, but before polling process manages
to update metadata after merge.
Before starting polling process, validate the merge has actually started
so there is not pointless invoke of lvmpolld.
This also fixes reported message from command, so user has
correct info whether merging has already started or
if it's delayed for next activation.
Move individual segment validation to a separate function
executed for 'complete_vg'.
Move some 'extra' validation bits from 'raid' validation to global
segtype validation (so extending existing normal validation)
TODO: still some test are left to be moved.
Reduce some duplication in validation process - there are still
some left thought so still room for improving overal speed.
The function timeout_add_seconds has quite a bit of variability. Using
timeout_add which specifies the timeout in ms instead of seconds. Testing
shows that this is much more consistent which should improve clients that
are using shorter timeouts for the API and the connection.
We can't keep 'display_lvname' for too long - it's using
ringbuffer and keeps limited number of names. So it's
safe only per few simple tests, but can't be used anymore
after some function calls..
(Fixes 00e641ef37)
Call _stats_regions_destroy() from dm_stats_list() if dms->regions
is non-NULL. This avoids leaking any pool allocations and ensures
the handle is in a known state: if an error occurs during the list,
dms->regions will be NULL and the handle will appear empty.
It could be actually better to use even cache origin in
read-only mode so there could no be some 'acidental'
change being done on this volume.
This however need further tools enhancment - where we would need
to handle whole subtree on 'lvchange -pr/-prw'.
When command calls backup() more then once (which is actually not
wanted) this warning message is shown repeatedly:
"WARNING: This metadata update is NOT backed up."
Instead now print message just once and less confuse user.
Add this functionality to lvconvert:
'lvconvert --thin cachedLV --thinpool vg/poll'
Converts cachedLV to external origin (which will be read-only).
New thin volume is created in thinpool LV and it's using external
origin as source for unprovisioned chunks.
This conversion happens online (while volume is in use).
Thin LV remains fully writable.
Cached external origin no longer could be written so cache will be used
ONLY for read operations. For this limitation we require cache mode
to be writethrough (as writeback cannot write to read-only volumes).
When thinLV is later removed cached external origin is again
fully usable, just note, LV remain in 'read-only' mode.
When read-write is needed, 'lvchange -prw' has to be used.
Single external origin could be user by multiple thinLV in
multiple differen thin pool.
When cache volume may be converted from normal to -real layer LV
we need to improve logic for call cache_check.
With this patch, we register call for cache_check only when metadata LV
is not yet present in active table slot (should match initial table
load).
This avoids unwanted checking when cache would become layer device
online.
The system is likely in some very inconsisten state.
Do not try to make it even more problematic with trying
to invoke tools like thin_check via callback.
External origin could be reloaded via more locks.
It's actually even more complex then thin-pool,
as it may be active on more nodes for linear LVs
(and maybe even more types).
External origin is always read-only thus unmodifiable
device so there should not be a problem accesing it
through multiple nodes.
Also for thin-pool check first presence of active thin-pool.
FIXME:
It's not easy to detect on which nodes this device is active
Thus manipulation with such device may require checking every
node and it active state and refresh.
But since such setup is quite complex to prepare and use,
hopefully there are not user trying to 'explore' this usage yet.
To be ready to show status of cache volume, call the status
with layer. Layer is automatically detected in this case when
cache volume is used in 'layered' form (needs -real suffix).
Avoid printing misleading message about single dirty block.
Instead properly detect condition where the 'cleaner' policy
needs to be installed without 'overloading' dirty variable.
Also print warning if we would be clearing read-only volume.
(it really shouldn't happen).
External origin could be activated as stand-alone device.
When the last thin LV is removed, external origin is no longer
the external origin and it's layer property was dropped.
Ensure dm table is correct by reloading external origin
(when it's active).
When LV is external origin, show info for LV but
status for -layer. So we expose more info to a user
as otherwise active external origin is only linear
mapping of -real layer.
We do the same for i.e. old snaphost origin.
Activation of raid has brough up also splitted image with tracing
(without taking lock for this).
So when raid is now activate - such image is not put into
table (with _rmeta). When user needs such device, just active it.
When --count=0 interval numbers are miscalculated:
Interval #18446744069414584325 time delta: 999920887ns
Interval #18446744069414584325 current err: -79113ns
End interval #18446744069414584325 duration: 999920887ns
This is because the command line argument is cast through the
uint32_t type, and fixed to UINT32_MAX:
_count = ((uint32_t)_int_args[COUNT_ARG]) ? : UINT32_MAX;
We also need to handle --count=0 specially when calculating the
interval number: since intervals count from #1, this must account
for the implicit "minus one" when converting from zero to the
UINT64_MAX value used (which is too large to store in _int_args).
The time management code mixes tests of the _timer_fd value with
code that should be timer agnostic: this causes problems for users
of the usleep() timer, since it cannot properly detect the start
of a new interval:
Beginning first interval
Interval #18446744069414584348 time delta: 1000000000ns
Interval #18446744069414584348 current err: 0ns
End interval #18446744069414584348 duration: 1000000000ns
Adjusted sample interval duration: 1000000000ns
[...]
Beginning first interval
Interval #18446744069414584349 time delta: 1000000000ns
Interval #18446744069414584349 current err: 0ns
End interval #18446744069414584349 duration: 1000000000ns
Adjusted sample interval duration: 1000000000ns
Separate these out, by defining a _timer_running() call that each
timer implements, and only define _timer_fd if we are compiling
with TIMERFD enabled.
Although the usleep() interval timer is not used if the Linux
TIMERFD interface is available it should still provide reasonably
good timing.
Instead of trying to estimate the error from the duration of the
last sleep, peg it to the start time of the program, and use the
value of ((start_time - now) % interval) to correct the current
interval duration.
This always pulls us back into sync at the end of each interval,
rather than relying on trying to incrementally adjust the time
duration at each interval start.
This greatly reduces drift when the usleep() clock is used.
The dm_bit_copy() macro uses the source (bs1) bitset size as the
limit for memcpy:
memcpy((bs1) + 1, (bs2) + 1, ((*(bs1) / DM_BITS_PER_INT) + 1)..)
This is safe if the destination bitset is smaller than the source,
or if the two bitsets are of the same size.
With a destination that is larger (e.g. when resizing a bitmap to
add more capacity), the memcpy will overrun the source bitset and
set garbage bits in the destination.
There are nine uses of the macro currently (8 in libdm/regex, and
1 in daemons/cmirrord): in each case the two bitsets are always of
equal size so the behaviour is unchanged.
Fix the macro to use bs2's size to simplify resizing bitsets and
avoid the need for another copy macro.
Commit 0690392040 revealed a problem
in raid metadata manipulation.
We do two operations in one table reload:
- raid leg/image extraction
- rename remaining raid legs
This should be made in separate steps. Otherwise we do an
uncorrectable table change on error path (leaving tables
for admin and dmsetup).
As a hotfix - restore the previous logic and use a single
new function _lv_update_and_reload_list which activates exclusively
extracted LVs on the list before resuming suspended raid LV.
This restore 'rename' functionality upon resume.
Also still preserve the 'origin_only' logic - although we know
it's not working properly for cluster and LV stacking.
Further fixes are needed.
If FIEMAP returns a single extent after the first call, no extent
boundary is detected and the first extent is not counted by the
normal mechanism.
In this case, increment nr_extents at the same time the extent is
added to the region table, before returning.
backup is not 'tested' for success and also it should
actually happen just when command is finished.
We do not target to make backups with each inter-step
metadata change.
RAID is LV property
TODO: only 2 flags are seg->status: PVMOVE & MERGING
At least the second one should be soon elimanted as again
we merge LV not a segment.
This is another place for 'common' use pattern or
reload and activation of deleted devices.
(Moving the exclusive activation to _deactivate_and_remove_lvs()).
TODO: looks like halve of raid function is reloading
just 'origin' - and the other full LV.
It's useful to be able to specify a minimum number of bits for a
new bitmap parsed from a list, for e.g. to allow for expansing a
group without needing to copy/reallocate the bitmap.
Add a backwards compatible symbol for programs linked against old
versions of the library.
It is sometimes convenient to iterate over the set bits in a dm
bitset in reverse order (from the highest set bit toward zero), or
to quickly find the last set bit.
Add dm_bit_get_last() and dm_bit_get_prev(), mirroring the existing
dm_bit_get_first() and dm_bit_get_next().
dm_bit_get_prev() uses __builtin_clz when available to efficiently
test the bitset in reverse.
Add a macro for the clz (count leading zeros) operation.
Use the GCC __builtin_clz() for clz() if it is available and fall
back to a shift based implementation on systems that do not set
HAVE___BUILTIN_CLZ.
Split out the loop that iterates over each batch of FIEMAP
extent data from the function that sets up and calls the ioctl
to reduce nesting and simplify local variable use:
_stats_get_extents_for_file()
-> _stats_map_extents()
The _stats_map_extents() function is responsible for detecting
eof and extent boundaries and adding whole, allocated extents
to the file extent table for region creation.
Check that all region_id values specified in a group bitmap are
actually present: although this should not normally happen when
using the dmstats tool, it is possible as a result of manual
changes (or bugs) for a group descriptor to contain one or more
group_id values that do not exist.
Check for this situation when reading group descriptors, warn
the user the user, and clear these bits in the bitmap when
formatting it for output.
If a region has a a DMS_GROUP tag in aux_data where the first
region_id in the bitmap is not the same as the containing region,
dmstats will segfault:
# '2' is never a valid group bitset list for region_id == 0
# dmsetup message vg_hex/root 0 "@stats_set_aux 0 DMS_GROUP=img:2#"
# dmsetup message vg_hex/root 0 "@stats_list"
0: 45383680+16384 16384 dmstats DMS_GROUP=img:2#
1: 46071808+32768 32768 dmstats -
2: 47382528+16384 16384 dmstats -
# dmstats list
Segmentation fault (core dumped)
The crash will occur in some arbitrary dm_stats_get_* property
method - this happens while processing the 1st region_id in the
bitset, because the region is marked as grouped, but there is
no group bitmap present at dms->groups[2]->regions.
Fix this by detecting a mismatch between the expected region_id
and dm_bit_get_first() for the parsed bitset during
_parse_aux_data_group().
Handle files that contain multiple logical extents in a single
physical extent properly:
- In FIEMAP terms a logical extent is a contiguous range of
sectors in the file's address space.
- One or more physically adjacent logical extents comprise a
physical extent: these are the disk areas that will be mapped
to regions.
- An extent boundary occurs when the start sector of extent
n+1 is not equal to (n.start + n.length).
This requires that we accumulate the length values of extents
returned by FIEMAP until a discontinuity is found (since each
struct fiemap_extent returned by FIEMAP only represents a single
logical extent, which may be contiguous with other logical
extents on-disk).
This avoids creating large numbers of regions for physically
adjacent (logical) extents and fixes the earlier behaviour which
would only map the first logical extent of the physical extent,
leaving gaps in the region table for these files.
To be able to detect lvm2 command is not leaking some
'unexpected' device - remove all devices before
test exits by its own command so test teardown
now can check what was 'left' unexpectedly.
Fix order of operation when converting raid1 into old mirror.
Before any later metadata modification are initiated prepare
mirror_log device with all clearing.
Then directly convert raid1 into mirror with mirror_log.
This convertion now properly see as precommitted metadata
new 'mirror' and committed old 'raid' and is able to
preload all LVs.
When mapping regions to a file descriptor, a temporary table of
extent descriptors is built using the dm_pool object building
interface.
Previously this use borrowed the dms->mem region and counter
table pool (since nothing can interleave with the allocation
while the caller is still in dm_stats_create_regions_from_fd()).
This turns out to be problematic for error recovery. When a
region creation operation fails partway through file mapping,
we need to roll back the set of already created regions and
this requires a listed handle: the dm_stats_list() will then
allocate from the same pool as the extents; we either have
to throw away valid list data, or leak the extent table, to
return the handle in a valid state.
Avoid this problem by creating a new, temporary mem pool in
_stats_create_file_regions() to hold the extent data, and
discarding it on exit from the function.
While cleaning up the table of already created regions during a
failed dm_stats_create_regions_from_fd(), list the handle once,
and call _stats_delete_region() directly. This avoids sending a
@stats_list message for each region deleted, reducing runtime
from 6s to 0.7s when cleaning up ~250 out of ~10000 regions:
# time dmstats create --filemap b.img
device-mapper: message ioctl on (253:0) failed: Cannot allocate memory
Failed to create region 246 of 309 at 9388032.
Could not create regions from file /root/b.img
<< pauses here >>
Command failed
real 0m6.267s
user 0m3.770s
sys 0m2.487s
# time dmstats create --filemap b.img
device-mapper: message ioctl on (253:0) failed: Cannot allocate memory
Failed to create region 246 of 309 at 9388032.
Could not create regions from file /root/b.img
Command failed
real 0m0.716s
user 0m0.034s
sys 0m0.581s
Testing the error path requires region creation to start to
fail part way through the operation (in order to have regions
to clean up): the simplest way is to ensure the system is
close to the kernel limit of 1/4 RAM or 1/2 vmalloc space
consumed by dmstats data.
Split dm_stats_delete_region() so that internal callers can manage
the handle state themselves.
dm_stats_delete_region() now just handles checking the state of the
handle, reporting validation errors, and calling dm_stats_list() if
necessary, before calling _stats_delete_region().
The new _stats_delete_region() function performs the actual group
member removal and region deletion, and requires a fully listed
handle to operate.
Callers that repeatedly delete regions can use a single listed
handle for many operations on the same device, avoiding one
message ioctl per region deleted: since @stats_list with many
regions is expensive, this yields large runtime improvements.
If we fail to create a region during dm_stats_create_regions_from_fd(),
we must remove all regions that were created to do this to date. This
needs to loop over the table of region_id values that were populated
by _stats_create_file_regions() before the error.
The code for this failure case in the out_remove branch incorrectly
uses the table index as the region_id:
for (--i; i != DM_STATS_REGION_NOT_PRESENT; i--) {
if (!dm_stats_delete_region(dms, i))
log_error("Could not delete region " FMTu64 ".", i);
}
This causes the cleanup code to delete a completely unrelated set
of regions (since the index here will always be nr_regions..0).
Fix it to pass the actual region_id stored in regions[i] instead.
Fix a silly bug in dm_stats_delete_region() that hugely inflates
runtimes when deleting a large number of regions.
For ~50,000 regions this change reduces the runtime from 98s to
6s on my test systems (a ~93% reduction).
The bug exists because dm_stats_delete_region() applies a truth
test to the return value of dm_stats_get_nr_areas(); this is
never correct usage - it will walk the entire region table and
calculate area counts for each region (which is roughly O(n^2)
in the number of regions, as dm_stats_delete_region() is being
called inside a region walk).
Although the individual area calculation is not that costly,
uselessly running anything 2,500,000,000 times over gets a bit
slow.
A much cheaper test (which is always true if the areas check is
true) is to just test dm_stats_get_nr_regions() or dms->regions;
if either is true it implies at least one area exists.
Old:
Performance counter stats for 'dmstats delete --allregions --alldevices':
98117.791458 task-clock (msec) # 1.000 CPUs utilized
127 context-switches # 0.001 K/sec
3 cpu-migrations # 0.000 K/sec
6,631 page-faults # 0.068 K/sec
307,711,724,562 cycles # 3.136 GHz
544,762,959,577 instructions # 1.77 insn per cycle
84,287,824,115 branches # 859.047 M/sec
2,538,875 branch-misses # 0.00% of all branches
98.119578733 seconds time elapsed
New:
Performance counter stats for 'dmstats delete --allregions --alldevices':
6427.251074 task-clock (msec) # 1.000 CPUs utilized
6 context-switches # 0.001 K/sec
0 cpu-migrations # 0.000 K/sec
6,634 page-faults # 0.001 M/sec
21,613,018,724 cycles # 3.363 GHz
3,794,755,445 instructions # 0.18 insn per cycle
852,974,026 branches # 132.712 M/sec
808,625 branch-misses # 0.09% of all branches
6.428953647 seconds time elapsed
Simplify info run for use only for INFO & STATUS.
Drop handling MKNODES within _info_run() call
and use more advanced _setup_task_run() directly.
This allows to further simplify _info_run().
Integrate also query for inactive table and
handle dm_task_run() and dm_task_get_info()
(thus switching to setup_task_run)
Add one exception case for DM_DEVICE_TARGET_MSG.
This allows further shortening and simplification of all
other users of this function.
It's actually not needed to call extra lv_has_target_type() to detect
snapshot merge is in progress - decode this right during status
capturing and save even few extra ioctl calls.
Drop LV from passed API arg - it's always segment being checked.
Also use_layer is now in full control of lv_info_with_seg_status().
It decides which device needs to be checked to get 'the most info'.
TODO: future version should be able to expose status from
Start moving selection of status taken for a LV into a single place.
The logic for showing info & status has been spread over multiple
places and were doing too complex decision going agains each other.
Unify selection of status of origin & cow scanned device.
TODO: in future we want to grab status for LV and layered LV and have
both statuses present for display - i.e. when 'old snapshot'
of thinLV is takes and there is ongoing merge - at some moment
we are not capable to show all needed info.
When lvm2 wants to see a status, it needs to validate,
segment for status reading is matching whan lvm2 expects in
metadata.
Also ensure status failure will not cause '0' from info reading
when actual info was collected properly.
Failure in 'status' reading is considered to be
a 'log_warn()' event only.
When we can't parse status, switch to warning as this is not
considered an errornous case. LVS is not supposed to return
error status code when device is not what it's been expected to
be - but it should be WARNING a user there is something unexpected.
Convert lvs -o lv_merge_failed,lv_snapshot_invalid to use
lv_info_and_status function.
This makes it equal to attr value showing this info
(as they were different since they were derived from
different data set and different logic as well).
Also saves couple extra ioctl that were needed to obtain this info.
When displaying <reporting_command> -o help, we'd like to have fields
grouped nicely, not starting having groups interleaved as it was before.
The code that displays the help output for fields takes the order as
written in columns.h file - this caused output like:
$ lvs -o help
Logical Volume Fields
---------------------
...field list...
Logical Volume Device Info and Status Combined Fields
-----------------------------------------------------
...field list...
Logical Volume Fields
---------------------
...field list...
Logical Volume Device Status Fields
-----------------------------------
...field list...
Logical Volume Fields
---------------------
...field list...
Instead, let's have it without groups interleaved which may be
a bit confusing, so:
Logical Volume Fields
---------------------
...field list...
Logical Volume Device Status Fields
-----------------------------------
...field list...
Logical Volume Device Info and Status Combined Fields
-----------------------------------------------------
...field list...
..and so on.
Use LVM_DBUSD_TEST_MODE env variable to customize what we test.
Default is the same where we try to test all combinations of all
modes. Renamed to make it consistent with the other env variables
that are used in the unit test.
- We check that all properties match the introspection data. We
don't verify values for every property as only lvm knows what they
should be.
- We are testing vg.Move
Added a properties changed signal on the job dbus object so that client
can wait for a signal that the job is complete instead of polling or
blocking on the wait method.
Allows the user to override the number of commands that get dumped
to the log when we encounter a lvm error. Also useful during
development when you don't want to see the blackbox output.
In case any SubLV of a RaidLV transiently fails, it needs
two "lvchange --refresh RaidLV" runs to get it to fully
operational mode again. Reason being, that lvm reloads all
targets for the RaidLV tree but doesn't resume the SubLVs
until after the whole tree has been reloaded in the first
refresh run. Thus the live mapping table of the SubLVs
still point to an "error" mapping and the dm-raid target
can't retrieve any superblock from the MetaLV(s) in processing
the constructor during this preload thus not discovering the
again accessible SubLVs. In the second run, the SubLV targets
map proper (meta)data, hence the constructor discovers those
fine now.
Solve by resuming the SubLVs of the RaidLV before
preloading the respective top-level RaidLV target.
Resolves: rhbz1399844
When reading data from stdout & stderr we were reading until the
reading until we got None back which really isn't needed as the
read will return everything that is available.
Avoid code duplication and use exiting commonly used
lv_update_and_reload() function.
There is still one place left where mirror is doing strange
double suspend call - needs there more thinking what's wrong with
that code.
When lvconvert adds a new leg - it's doing it free 'temporary' image
layer - however this temporary 'internal' mirror is also MIRRORED LV.
But the status bit was not properly transfered through layer.
We need to acquire a lock which can block us which in turn causes
the dbus request handling to block as well. Place the request on
the work queue instead.
Our expectation was that when using the lvm shell that when the lvm prompt
was read from stdout, that all other ouput had been written and flushed.
However, this doesn't appear to be the case. Add extra read passes to
retrieve delayed report data.
The default dbus python library mode of operation is to leverage
introspection. However, this introspection data isn't accessible
for users of the library and they have to specifically retrieve
the introspection data too. This resulted in many introspection
calls being made. This change eliminates introspection calls if
we are testing multiple concurrent test clients. If it's a single
client we will leverage a reduced amount of introspection data to
verify the introspection data is correct. Typically clients don't
leverage introspection data nearly as much as this test client.
The env variable LVM_DBUSD_PV_DEVICE_LIST when present and filled in
with at least 4 physical devices will run concurrently with other
instances running as long as they specify different devices in their
env variable.
When the env variable is not present the test runs as it did before.
In preparation to have more than one thread issuing commands to lvm
at the same time we need to serialize updates to the dbus state and
retrieving the global lvm state. To achieve this we have one thread
handling this with a thread safe queue taking and coalescing requests.
Looks like this isn't support across versions. Need to add functionality
to service to return the supported segment types, so we only use the
supported ones.
There are two possible errors in _dm_stats_populate_region():
* No region struct in dms->regions[region_id]
* Failure to parse data from @stats_print
These have very different causes: the first occurs where a client
program is populating one region at a time (region_id is a single
region identifier), and has not previously called dm_stats_list()
to dimension the region tables; this is an API usage error.
The second occurs when either we read unparseable data from the
kernel (kernel bug), or where various resource allocations fail.
Separate these two cases out and log separate messages for each
(allocation failures in the path already have their own distinct
message), since the "failed to parse.." message in the un-listed
handle case is confusing and misleading.
Do not emit warning message but only log debug message if
lvm2-lvmdbusd.service unit is missing and at the same time
we have global/notify_dbus=1 (which is used by default if we
configured sources with "--enable-notify-dbus"). We don't want
hard dependency between LVM2 and lvmdbusd so it's enough to log
only debug message in this case.
0 interval leads as of now to a busy loop with lvmetad and command.
Avoid testing this patological case.
TODO: Code should possibly translate zero interval into some small
sleep. With lvmpolld it's already 1/10s
Add new targets:
make check_lvmpolld
make check_cluster_lvmpolld
make check_lvmetad_lvmpolld
make check_all_lvmpolld
So check_lvmetad runs only base lvmetad test - to much
logic of remaining targets.
Previous behavior is available via check_all_lvmpolld.
Make it easier to replace missing segments with 'zero' returning
target - otherwise user would have to create some extra target
to provide zeros as /dev/zero can't be used (not a block device).
Also break code loop when segment is found and make it an INTERNAL_ERROR
where it's missing.
Instead of clearing multiple rmeta device with sequential activation
process and waiting for udev for every _rmeta device separately,
activate all _rmeta devices first and then clear them and deactivate
afterwards.
Also update some tracing messages.
When anyhing goes wrong during clearing process, always try to
deactivate as much _rmeta devices as possible before fail.
This code is no longer needed because the back ground task has been
removed. Will add back if we change the design and end up utilizing
multiple worker threads.
There is no reason to create another background task when the task that
created it is going to block waiting for it to finish. Instead we will
just execute the logic in the worker thread that is servicing the worker
queue.
Translate log_info() into log_very_verbose() which is macro
supposed to be used by our code.
log_info() is internal macro with eventually some 'symbolic' meaning
in syslogging daemons.
Instead of compiling 2 log call for 2 different logging functions,
and runtime decide which version to use - use only 'newer' function
and when user sets his own OLD dm_log logging translate it runtime
for old arg list set.
The positive part is - we get shorter generated library,
on the negative part this translation means, we always have evaluate
all args and print the message into local on stack buffer, before
we can pass this buffer to the users' logging function with proper
expected parameters (and such function may later decide to discard
logging based on message level so whole printing was unnecessary).
Ensure different logging function for dmeventd.c logging
and dm and lvm library.
We can recognize we want to show every log_info() and
log_notice() message from dmeventd.c code while not
exposing those from libdm/libdevmapper-event
Also switch to use log with errno - it's not changing
anything and doesn't bring any more features yet to dmeventd
logging but we just properly pass dm_errno_or_class properly
through the whole code stack for possible future use
(i.e. support of class logging for dmeventd).
Reword the logging logic and try to restore previous logging
behavior for 'standalone' running daemon while preserving
debuggable feautures it has gained.
So actual rules:
dmeventd without any '-d' option will syslog all messages
from dmeventd.c it dmeventd plugins.
log_notice()==log_verbose()
log_info()==log_very_verbose()
But to show also log_debug() used has to give '-ddd'.
When user specified '-d, -dd, -ddd, -dddd' it
will also enable tracing of messages from libdm & lib
executed code - which is mainly useful for testing
i.e.: 'dmeventd -fldddd'
Introduce macros:
log_level(), log_stderr(), log_once(), log_bypass_report()
For easier and more consisten way how to 'decoder' bits
of info from passed 'level'.
This patch fixes potential problem when 'level' of message
might not have always masked right bits.
Instead of creating a thread to handle the case where a client
is calling job.Wait, we will utilize a timer. This significantly
reduces the number of threads that get created and destroyed while
the service is running.
We will fetch the lvm state in non-main thread and only process the new
data with the main thread to prevent hanging the main thread event loop.
ref. https://bugs.freedesktop.org/show_bug.cgi?id=98521
pvscan --cache -aay was activating LVs in exported VGs
when it should not.
It appears that this was a regression from commit 9b640c3684
"pvscan: use process_each_vg for autoactivate".
If blkdeactivate finds out that the device on top of device stack
is already unmounted, it still proceeds with device stack deactivation
underneath now.
This situation can happen if blkdeactivate is started and the mount
point is unmounted in parallel by chance (so when blkdeactivate
gets the the actual umount call, the device is not mounted anymore).
Before, the blkdeactivate added such device to skip list which caused
all the stack underneath to be skipped too on deactivation. Now, we
proceed just as if blkdeactivate did the umount itself.
For example, in the example below, the vg-lvol0 is mounted on /mnt/test
when blkdeactivate is called, but it gets unmounted in parallel later
on when blkdeactivate gets to the actual umount call.
Before this patch (vg-lvol0 underneath not deactivated):
$ blkdeactivate -u
Deactivating block devices:
[UMOUNT]: unmounting vg-lvol0 (dm-2) mounted on /mnt/test... skipping
With this patch applied (vg-lvol0 underneath still deactivated):
$ blkdeactivate -u
Deactivating block devices:
[UMOUNT]: unmounting vg-lvol0 (dm-2) mounted on /mnt/test... already unmounted
[LVM]: deactivating Logical Volume vg/lvol0... done
(Automatic) repair may not be allowed during the initial sync of an upconverted
linear LV, because the data on the failing, primary leg hasn't been completely
synchronized to the N-1 other legs of the raid1 LV (replacing failed legs during
repair involves discontinuing access to any replaced legs data, thus preventing
data recovery on the primary leg e.g. via dd_rescue).
Even though repair would not cause data loss when adding legs to a fully synced
raid1 LV, we don't have information yet defining this state yet (e.g. a raid1
LV flag telling the fully synchronized status before any legs were added),
hence can't automatically decide to allow to repair.
If nonetheless a repair on a non-synced raid1 LVs is intended, the "--force"
option has to be provided.
Resolves: rhbz1311765
Validate kernel support for raid0/raid4 on given and
requested segtype before requesting conversions on them.
Because raid10 wasn't present in old RAID targets, add
the same validation to be prepared once we support them.
Check for dm-raid target version with non-standard raid4 mapping expecting the dedicated
parity device in the last rather than the first slot and prohibit to create, activate or
convert to such LVs from striped/raid0* or vice-versa in order to avoid data corruption.
Add related tests to lvconvert-raid-takeover.sh
Resolves: rhbz1388962
On conversions between striped/raid0* and raid4, the kernel expects
the dedicated raid4 parity SubLVs in the first segment area rather than
in the last it's been allocated to, thus the data mapping ain't proper.
Enhance lvconvert (lib/metadata/raid_manip.c) to shift the dedicated
parity SubLVs on conversions from striped/raid0* to raid4 and vice-versa.
In case of raid0_meta -> raid4 where the MD raid0 personality already has
stored RAID array device positions in the superblocks, the MetaLVs have to
be cleared so that the kernel doesn't fail validating the array positions
after lvm has shifted them up by one.
Add more tests to lvconvert-raid-takeover.sh including one to check for
mapping flaws by converting a created raid4 with filesystem -> striped
and fsck it.
Whilst on it:
- add missing direct striped -> raid4 conversion to the takeover array
to avoid an intermim conversion from striped -> raid0*
- clean up the takeover array
- allow lvconvert to actually call lv_raid_convert() on all takeover requests
in order to check parameters and display messages provided by takeover
functions rather than just "...not supported" from within lvconvert
- fix a typo
Resolves: rhbz1386148
If a device disappears after obtaining the list of devices but before
processing it as a member of that list, dmsetup exits with a failure code.
Most commands still produce what output they can in these circumstances,
but 'ls --tree' and 'info -c' with fields depending on device dependencies
didn't. Change this.
2016-10-18 18:01:52 +01:00
1319 changed files with 173845 additions and 101699 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
